diff --git a/resources/profiles/Creality.json b/resources/profiles/Creality.json
index 6374131d73..9a3dae3648 100644
--- a/resources/profiles/Creality.json
+++ b/resources/profiles/Creality.json
@@ -1396,42 +1396,82 @@
 			"name": "CR-ABS @Creality K2 0.4 nozzle",
 			"sub_path": "filament/CR-ABS @Creality K2 0.4 nozzle.json"
 		},
+		{
+			"name": "CR-PETG @Creality K2 0.4 nozzle",
+			"sub_path": "filament/CR-PETG @Creality K2 0.4 nozzle.json"
+		},
 		{
 			"name": "CR-ABS @Creality K2 0.6 nozzle",
 			"sub_path": "filament/CR-ABS @Creality K2 0.6 nozzle.json"
 		},
+		{
+			"name": "CR-PETG @Creality K2 0.6 nozzle",
+			"sub_path": "filament/CR-PETG @Creality K2 0.6 nozzle.json"
+		},
 		{
 			"name": "CR-ABS @Creality K2 0.8 nozzle",
 			"sub_path": "filament/CR-ABS @Creality K2 0.8 nozzle.json"
 		},
+		{
+			"name": "CR-PETG @Creality K2 0.8 nozzle",
+			"sub_path": "filament/CR-PETG @Creality K2 0.8 nozzle.json"
+		},
 		{
 			"name": "CR-ABS @Creality K2 Plus 0.2 nozzle",
 			"sub_path": "filament/CR-ABS @Creality K2 Plus 0.2 nozzle.json"
 		},
+		{
+			"name": "CR-PETG @Creality K2 Plus 0.2 nozzle",
+			"sub_path": "filament/CR-PETG @Creality K2 Plus 0.2 nozzle.json"
+		},
 		{
 			"name": "CR-ABS @Creality K2 Plus 0.4 nozzle",
 			"sub_path": "filament/CR-ABS @Creality K2 Plus 0.4 nozzle.json"
 		},
+		{
+			"name": "CR-PETG @Creality K2 Plus 0.4 nozzle",
+			"sub_path": "filament/CR-PETG @Creality K2 Plus 0.4 nozzle.json"
+		},
 		{
 			"name": "CR-ABS @Creality K2 Plus 0.6 nozzle",
 			"sub_path": "filament/CR-ABS @Creality K2 Plus 0.6 nozzle.json"
 		},
+		{
+			"name": "CR-PETG @Creality K2 Plus 0.6 nozzle",
+			"sub_path": "filament/CR-PETG @Creality K2 Plus 0.6 nozzle.json"
+		},
 		{
 			"name": "CR-ABS @Creality K2 Plus 0.8 nozzle",
 			"sub_path": "filament/CR-ABS @Creality K2 Plus 0.8 nozzle.json"
 		},
+		{
+			"name": "CR-PETG @Creality K2 Plus 0.8 nozzle",
+			"sub_path": "filament/CR-PETG @Creality K2 Plus 0.8 nozzle.json"
+		},
 		{
 			"name": "CR-ABS @Creality K2 Pro 0.4 nozzle",
 			"sub_path": "filament/CR-ABS @Creality K2 Pro 0.4 nozzle.json"
 		},
+		{
+			"name": "CR-PETG @Creality K2 Pro 0.4 nozzle",
+			"sub_path": "filament/CR-PETG @Creality K2 Pro 0.4 nozzle.json"
+		},
 		{
 			"name": "CR-ABS @Creality K2 Pro 0.6 nozzle",
 			"sub_path": "filament/CR-ABS @Creality K2 Pro 0.6 nozzle.json"
 		},
+		{
+			"name": "CR-PETG @Creality K2 Pro 0.6 nozzle",
+			"sub_path": "filament/CR-PETG @Creality K2 Pro 0.6 nozzle.json"
+		},
 		{
 			"name": "CR-ABS @Creality K2 Pro 0.8 nozzle",
 			"sub_path": "filament/CR-ABS @Creality K2 Pro 0.8 nozzle.json"
 		},
+		{
+			"name": "CR-PETG @Creality K2 Pro 0.8 nozzle",
+			"sub_path": "filament/CR-PETG @Creality K2 Pro 0.8 nozzle.json"
+		},
 		{
 			"name": "CR-Nylon @Creality K2 Plus 0.4 nozzle",
 			"sub_path": "filament/CR-Nylon @Creality K2 Plus 0.4 nozzle.json"
diff --git a/resources/profiles/Creality/filament/CR-PETG @Creality K2 0.4 nozzle.json b/resources/profiles/Creality/filament/CR-PETG @Creality K2 0.4 nozzle.json
new file mode 100644
index 0000000000..7005c4ce5d
--- /dev/null
+++ b/resources/profiles/Creality/filament/CR-PETG @Creality K2 0.4 nozzle.json	
@@ -0,0 +1,108 @@
+{
+	"type": "filament",
+	"filament_id": "06001",
+	"setting_id": "GFSA04",
+	"name": "CR-PETG @Creality K2 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_petg",
+	"activate_air_filtration": "0",
+	"activate_chamber_temp_control": "1",
+	"additional_cooling_fan_speed": "0",
+	"chamber_temperature": "35",
+	"close_fan_the_first_x_layers": "3",
+	"compatible_printers": [
+		"Creality K2 0.4 nozzle"
+	],
+	"complete_print_exhaust_fan_speed": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_plate_temp": "70",
+	"cool_plate_temp_initial_layer": "70",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"during_print_exhaust_fan_speed": "0",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"eng_plate_temp": "50",
+	"eng_plate_temp_initial_layer": "55",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"fan_cooling_layer_time": "30",
+	"fan_max_speed": "80",
+	"fan_min_speed": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_cost": "20",
+	"filament_density": "1.24",
+	"filament_deretraction_speed": "nil",
+	"filament_diameter": "1.75",
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_flow_ratio": "0.95",
+	"filament_is_support": "0",
+	"filament_load_time": "0",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_max_volumetric_speed": "18",
+	"filament_minimal_purge_on_wipe_tower": "15",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_before_wipe": "90%",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_retract_restart_extra": "nil",
+	"filament_retract_when_changing_layer": "nil",
+	"filament_retraction_length": "nil",
+	"filament_retraction_minimum_travel": "nil",
+	"filament_retraction_speed": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_soluble": "0",
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_toolchange_delay": "0",
+	"filament_type": [
+		"PETG"
+	],
+	"filament_unload_time": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": "nil",
+	"filament_wipe_distance": "nil",
+	"filament_z_hop": "nil",
+	"filament_z_hop_types": "Slope Lift",
+	"full_fan_speed_layer": "0",
+	"hot_plate_temp": "70",
+	"hot_plate_temp_initial_layer": "70",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]",
+	"nozzle_temperature": "250",
+	"nozzle_temperature_initial_layer": "250",
+	"nozzle_temperature_range_high": "270",
+	"nozzle_temperature_range_low": "220",
+	"overhang_fan_speed": "90",
+	"overhang_fan_threshold": "10%",
+	"pressure_advance": "0.07",
+	"reduce_fan_stop_start_freq": "1",
+	"required_nozzle_HRC": "0",
+	"slow_down_for_layer_cooling": "1",
+	"slow_down_layer_time": "12",
+	"slow_down_min_speed": "20",
+	"support_material_interface_fan_speed": "-1",
+	"temperature_vitrification": "60",
+	"textured_plate_temp": "70",
+	"textured_plate_temp_initial_layer": "70"
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @Creality K2 0.6 nozzle.json b/resources/profiles/Creality/filament/CR-PETG @Creality K2 0.6 nozzle.json
new file mode 100644
index 0000000000..3d496aa2c9
--- /dev/null
+++ b/resources/profiles/Creality/filament/CR-PETG @Creality K2 0.6 nozzle.json	
@@ -0,0 +1,108 @@
+{
+	"type": "filament",
+	"filament_id": "06001",
+	"setting_id": "GFSA04",
+	"name": "CR-PETG @Creality K2 0.6 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_petg",
+	"activate_air_filtration": "0",
+	"activate_chamber_temp_control": "1",
+	"additional_cooling_fan_speed": "0",
+	"chamber_temperature": "35",
+	"close_fan_the_first_x_layers": "3",
+	"compatible_printers": [
+		"Creality K2 0.6 nozzle"
+	],
+	"complete_print_exhaust_fan_speed": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_plate_temp": "70",
+	"cool_plate_temp_initial_layer": "70",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"during_print_exhaust_fan_speed": "0",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"eng_plate_temp": "50",
+	"eng_plate_temp_initial_layer": "55",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"fan_cooling_layer_time": "30",
+	"fan_max_speed": "80",
+	"fan_min_speed": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_cost": "14",
+	"filament_density": "1.23",
+	"filament_deretraction_speed": "nil",
+	"filament_diameter": "1.75",
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_flow_ratio": "0.95",
+	"filament_is_support": "0",
+	"filament_load_time": "0",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_max_volumetric_speed": "18",
+	"filament_minimal_purge_on_wipe_tower": "15",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_before_wipe": "nil",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_retract_restart_extra": "nil",
+	"filament_retract_when_changing_layer": "nil",
+	"filament_retraction_length": "0.6",
+	"filament_retraction_minimum_travel": "nil",
+	"filament_retraction_speed": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_soluble": "0",
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_toolchange_delay": "0",
+	"filament_type": [
+		"PETG"
+	],
+	"filament_unload_time": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": "nil",
+	"filament_wipe_distance": "nil",
+	"filament_z_hop": "nil",
+	"filament_z_hop_types": "nil",
+	"full_fan_speed_layer": "0",
+	"hot_plate_temp": "70",
+	"hot_plate_temp_initial_layer": "70",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.5,220],[2.0,220],[2.5,250]]",
+	"nozzle_temperature": "250",
+	"nozzle_temperature_initial_layer": "250",
+	"nozzle_temperature_range_high": "270",
+	"nozzle_temperature_range_low": "220",
+	"overhang_fan_speed": "90",
+	"overhang_fan_threshold": "10%",
+	"pressure_advance": "0.05",
+	"reduce_fan_stop_start_freq": "1",
+	"required_nozzle_HRC": "0",
+	"slow_down_for_layer_cooling": "1",
+	"slow_down_layer_time": "12",
+	"slow_down_min_speed": "20",
+	"support_material_interface_fan_speed": "-1",
+	"temperature_vitrification": "80",
+	"textured_plate_temp": "70",
+	"textured_plate_temp_initial_layer": "70"
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @Creality K2 0.8 nozzle.json b/resources/profiles/Creality/filament/CR-PETG @Creality K2 0.8 nozzle.json
new file mode 100644
index 0000000000..0cdc4ccd40
--- /dev/null
+++ b/resources/profiles/Creality/filament/CR-PETG @Creality K2 0.8 nozzle.json	
@@ -0,0 +1,108 @@
+{
+	"type": "filament",
+	"filament_id": "06001",
+	"setting_id": "GFSA04",
+	"name": "CR-PETG @Creality K2 0.8 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_petg",
+	"activate_air_filtration": "0",
+	"activate_chamber_temp_control": "1",
+	"additional_cooling_fan_speed": "0",
+	"chamber_temperature": "35",
+	"close_fan_the_first_x_layers": "3",
+	"compatible_printers": [
+		"Creality K2 0.8 nozzle"
+	],
+	"complete_print_exhaust_fan_speed": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_plate_temp": "70",
+	"cool_plate_temp_initial_layer": "70",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"during_print_exhaust_fan_speed": "0",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"eng_plate_temp": "50",
+	"eng_plate_temp_initial_layer": "55",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"fan_cooling_layer_time": "30",
+	"fan_max_speed": "80",
+	"fan_min_speed": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_cost": "14",
+	"filament_density": "1.23",
+	"filament_deretraction_speed": "nil",
+	"filament_diameter": "1.75",
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_flow_ratio": "0.95",
+	"filament_is_support": "0",
+	"filament_load_time": "0",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_max_volumetric_speed": "18",
+	"filament_minimal_purge_on_wipe_tower": "15",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_before_wipe": "nil",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_retract_restart_extra": "nil",
+	"filament_retract_when_changing_layer": "nil",
+	"filament_retraction_length": "0.8",
+	"filament_retraction_minimum_travel": "nil",
+	"filament_retraction_speed": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_soluble": "0",
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_toolchange_delay": "0",
+	"filament_type": [
+		"PETG"
+	],
+	"filament_unload_time": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": "nil",
+	"filament_wipe_distance": "nil",
+	"filament_z_hop": "nil",
+	"filament_z_hop_types": "nil",
+	"full_fan_speed_layer": "0",
+	"hot_plate_temp": "70",
+	"hot_plate_temp_initial_layer": "70",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[2.0,220],[3.5,220],[4.0,240]]",
+	"nozzle_temperature": "240",
+	"nozzle_temperature_initial_layer": "240",
+	"nozzle_temperature_range_high": "270",
+	"nozzle_temperature_range_low": "220",
+	"overhang_fan_speed": "90",
+	"overhang_fan_threshold": "10%",
+	"pressure_advance": "0.028",
+	"reduce_fan_stop_start_freq": "1",
+	"required_nozzle_HRC": "0",
+	"slow_down_for_layer_cooling": "1",
+	"slow_down_layer_time": "12",
+	"slow_down_min_speed": "20",
+	"support_material_interface_fan_speed": "-1",
+	"temperature_vitrification": "80",
+	"textured_plate_temp": "70",
+	"textured_plate_temp_initial_layer": "70"
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/filament/CR-PETG @Creality K2 Plus 0.2 nozzle.json
new file mode 100644
index 0000000000..d13341236c
--- /dev/null
+++ b/resources/profiles/Creality/filament/CR-PETG @Creality K2 Plus 0.2 nozzle.json	
@@ -0,0 +1,104 @@
+{
+	"type": "filament",
+	"filament_id": "06001",
+	"setting_id": "GFSA04",
+	"name": "CR-PETG @Creality K2 Plus 0.2 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_petg",
+	"activate_air_filtration": "0",
+	"activate_chamber_temp_control": "1",
+	"additional_cooling_fan_speed": "0",
+	"chamber_temperature": "35",
+	"close_fan_the_first_x_layers": "3",
+	"compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle"
+	],
+	"complete_print_exhaust_fan_speed": "80",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_plate_temp": "70",
+	"cool_plate_temp_initial_layer": "60",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"during_print_exhaust_fan_speed": "60",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"eng_plate_temp": "0",
+	"eng_plate_temp_initial_layer": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"fan_cooling_layer_time": "30",
+	"fan_max_speed": "80",
+	"fan_min_speed": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_cost": "14",
+	"filament_density": "1.23",
+	"filament_deretraction_speed": "nil",
+	"filament_diameter": "1.75",
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_flow_ratio": "0.95",
+	"filament_is_support": "0",
+	"filament_load_time": "0",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_max_volumetric_speed": "1",
+	"filament_minimal_purge_on_wipe_tower": "15",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_before_wipe": "nil",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_retract_restart_extra": "nil",
+	"filament_retract_when_changing_layer": "nil",
+	"filament_retraction_length": "0.8",
+	"filament_retraction_minimum_travel": "nil",
+	"filament_retraction_speed": "nil",
+	"filament_shrink": "100%",
+	"filament_soluble": "0",
+	"filament_start_gcode": [
+		";filament start gcode\n{if !multicolor_method}\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+	],
+	"filament_toolchange_delay": "0",
+	"filament_type": [
+		"PETG"
+	],
+	"filament_unload_time": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": "nil",
+	"filament_wipe_distance": "nil",
+	"filament_z_hop": "nil",
+	"filament_z_hop_types": "nil",
+	"full_fan_speed_layer": "0",
+	"hot_plate_temp": "70",
+	"hot_plate_temp_initial_layer": "70",
+	"material_flow_dependent_temperature": "0",
+	"nozzle_temperature": "250",
+	"nozzle_temperature_initial_layer": "250",
+	"nozzle_temperature_range_high": "270",
+	"nozzle_temperature_range_low": "220",
+	"overhang_fan_speed": "90",
+	"overhang_fan_threshold": "25%",
+	"pressure_advance": "0.07",
+	"reduce_fan_stop_start_freq": "1",
+	"required_nozzle_HRC": "0",
+	"slow_down_for_layer_cooling": "1",
+	"slow_down_layer_time": "8",
+	"slow_down_min_speed": "20",
+	"support_material_interface_fan_speed": "-1",
+	"temperature_vitrification": "80",
+	"textured_plate_temp": "70",
+	"textured_plate_temp_initial_layer": "70"
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/filament/CR-PETG @Creality K2 Plus 0.4 nozzle.json
new file mode 100644
index 0000000000..44fe50a577
--- /dev/null
+++ b/resources/profiles/Creality/filament/CR-PETG @Creality K2 Plus 0.4 nozzle.json	
@@ -0,0 +1,104 @@
+{
+	"type": "filament",
+	"filament_id": "06001",
+	"setting_id": "GFSA04",
+	"name": "CR-PETG @Creality K2 Plus 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_petg",
+	"activate_air_filtration": "0",
+	"activate_chamber_temp_control": "1",
+	"additional_cooling_fan_speed": "0",
+	"chamber_temperature": "35",
+	"close_fan_the_first_x_layers": "3",
+	"compatible_printers": [
+		"Creality K2 Plus 0.4 nozzle"
+	],
+	"complete_print_exhaust_fan_speed": "80",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_plate_temp": "70",
+	"cool_plate_temp_initial_layer": "70",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"during_print_exhaust_fan_speed": "60",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"eng_plate_temp": "50",
+	"eng_plate_temp_initial_layer": "55",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"fan_cooling_layer_time": "30",
+	"fan_max_speed": "80",
+	"fan_min_speed": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_cost": "20",
+	"filament_density": "1.24",
+	"filament_deretraction_speed": "nil",
+	"filament_diameter": "1.75",
+	"filament_end_gcode": [
+		";filament end gcode \n"
+	],
+	"filament_flow_ratio": "0.95",
+	"filament_is_support": "0",
+	"filament_load_time": "0",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_max_volumetric_speed": "18",
+	"filament_minimal_purge_on_wipe_tower": "15",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_before_wipe": "100",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_retract_restart_extra": "nil",
+	"filament_retract_when_changing_layer": "nil",
+	"filament_retraction_length": "1.2",
+	"filament_retraction_minimum_travel": "nil",
+	"filament_retraction_speed": "nil",
+	"filament_shrink": "100%",
+	"filament_soluble": "0",
+	"filament_start_gcode": [
+		";filament start gcode\n{if !multicolor_method}\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+	],
+	"filament_toolchange_delay": "0",
+	"filament_type": [
+		"PETG"
+	],
+	"filament_unload_time": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": "nil",
+	"filament_wipe_distance": "nil",
+	"filament_z_hop": "nil",
+	"filament_z_hop_types": "nil",
+	"full_fan_speed_layer": "0",
+	"hot_plate_temp": "70",
+	"hot_plate_temp_initial_layer": "70",
+	"material_flow_dependent_temperature": "0",
+	"nozzle_temperature": "240",
+	"nozzle_temperature_initial_layer": "240",
+	"nozzle_temperature_range_high": "270",
+	"nozzle_temperature_range_low": "220",
+	"overhang_fan_speed": "100",
+	"overhang_fan_threshold": "25%",
+	"pressure_advance": "0.07",
+	"reduce_fan_stop_start_freq": "1",
+	"required_nozzle_HRC": "0",
+	"slow_down_for_layer_cooling": "1",
+	"slow_down_layer_time": "8",
+	"slow_down_min_speed": "20",
+	"support_material_interface_fan_speed": "-1",
+	"temperature_vitrification": "60",
+	"textured_plate_temp": "70",
+	"textured_plate_temp_initial_layer": "70"
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/filament/CR-PETG @Creality K2 Plus 0.6 nozzle.json
new file mode 100644
index 0000000000..cf6c2f87c2
--- /dev/null
+++ b/resources/profiles/Creality/filament/CR-PETG @Creality K2 Plus 0.6 nozzle.json	
@@ -0,0 +1,104 @@
+{
+	"type": "filament",
+	"filament_id": "06001",
+	"setting_id": "GFSA04",
+	"name": "CR-PETG @Creality K2 Plus 0.6 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_petg",
+	"activate_air_filtration": "0",
+	"activate_chamber_temp_control": "1",
+	"additional_cooling_fan_speed": "0",
+	"chamber_temperature": "35",
+	"close_fan_the_first_x_layers": "3",
+	"compatible_printers": [
+		"Creality K2 Plus 0.6 nozzle"
+	],
+	"complete_print_exhaust_fan_speed": "80",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_plate_temp": "70",
+	"cool_plate_temp_initial_layer": "70",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"during_print_exhaust_fan_speed": "60",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"eng_plate_temp": "0",
+	"eng_plate_temp_initial_layer": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"fan_cooling_layer_time": "30",
+	"fan_max_speed": "80",
+	"fan_min_speed": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_cost": "14",
+	"filament_density": "1.23",
+	"filament_deretraction_speed": "nil",
+	"filament_diameter": "1.75",
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_flow_ratio": "0.95",
+	"filament_is_support": "0",
+	"filament_load_time": "0",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_max_volumetric_speed": "18",
+	"filament_minimal_purge_on_wipe_tower": "15",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_before_wipe": "nil",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_retract_restart_extra": "nil",
+	"filament_retract_when_changing_layer": "nil",
+	"filament_retraction_length": "nil",
+	"filament_retraction_minimum_travel": "nil",
+	"filament_retraction_speed": "nil",
+	"filament_shrink": "100%",
+	"filament_soluble": "0",
+	"filament_start_gcode": [
+		";filament start gcode\n{if !multicolor_method}\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+	],
+	"filament_toolchange_delay": "0",
+	"filament_type": [
+		"PETG"
+	],
+	"filament_unload_time": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": "nil",
+	"filament_wipe_distance": "nil",
+	"filament_z_hop": "nil",
+	"filament_z_hop_types": "nil",
+	"full_fan_speed_layer": "0",
+	"hot_plate_temp": "70",
+	"hot_plate_temp_initial_layer": "70",
+	"material_flow_dependent_temperature": "0",
+	"nozzle_temperature": "250",
+	"nozzle_temperature_initial_layer": "250",
+	"nozzle_temperature_range_high": "270",
+	"nozzle_temperature_range_low": "220",
+	"overhang_fan_speed": "90",
+	"overhang_fan_threshold": "25%",
+	"pressure_advance": "0.052",
+	"reduce_fan_stop_start_freq": "1",
+	"required_nozzle_HRC": "0",
+	"slow_down_for_layer_cooling": "1",
+	"slow_down_layer_time": "8",
+	"slow_down_min_speed": "20",
+	"support_material_interface_fan_speed": "-1",
+	"temperature_vitrification": "80",
+	"textured_plate_temp": "70",
+	"textured_plate_temp_initial_layer": "70"
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/filament/CR-PETG @Creality K2 Plus 0.8 nozzle.json
new file mode 100644
index 0000000000..dee3f1f99f
--- /dev/null
+++ b/resources/profiles/Creality/filament/CR-PETG @Creality K2 Plus 0.8 nozzle.json	
@@ -0,0 +1,104 @@
+{
+	"type": "filament",
+	"filament_id": "06001",
+	"setting_id": "GFSA04",
+	"name": "CR-PETG @Creality K2 Plus 0.8 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_petg",
+	"activate_air_filtration": "0",
+	"activate_chamber_temp_control": "1",
+	"additional_cooling_fan_speed": "0",
+	"chamber_temperature": "35",
+	"close_fan_the_first_x_layers": "3",
+	"compatible_printers": [
+		"Creality K2 Plus 0.8 nozzle"
+	],
+	"complete_print_exhaust_fan_speed": "80",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_plate_temp": "70",
+	"cool_plate_temp_initial_layer": "70",
+	"cool_special_cds_fan_speed": "0",
+	"default_filament_colour": "\"\"",
+	"during_print_exhaust_fan_speed": "60",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"eng_plate_temp": "0",
+	"eng_plate_temp_initial_layer": "0",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"fan_cooling_layer_time": "30",
+	"fan_max_speed": "80",
+	"fan_min_speed": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_cost": "14",
+	"filament_density": "1.23",
+	"filament_deretraction_speed": "nil",
+	"filament_diameter": "1.75",
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_flow_ratio": "0.95",
+	"filament_is_support": "0",
+	"filament_load_time": "0",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_max_volumetric_speed": "18",
+	"filament_minimal_purge_on_wipe_tower": "15",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+	"filament_retract_before_wipe": "nil",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_retract_restart_extra": "nil",
+	"filament_retract_when_changing_layer": "nil",
+	"filament_retraction_length": "nil",
+	"filament_retraction_minimum_travel": "nil",
+	"filament_retraction_speed": "nil",
+	"filament_shrink": "100%",
+	"filament_soluble": "0",
+	"filament_start_gcode": [
+		";filament start gcode\n{if !multicolor_method}\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+	],
+	"filament_toolchange_delay": "0",
+	"filament_type": [
+		"PETG"
+	],
+	"filament_unload_time": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": "nil",
+	"filament_wipe_distance": "nil",
+	"filament_z_hop": "nil",
+	"filament_z_hop_types": "nil",
+	"full_fan_speed_layer": "0",
+	"hot_plate_temp": "70",
+	"hot_plate_temp_initial_layer": "70",
+	"material_flow_dependent_temperature": "0",
+	"nozzle_temperature": "250",
+	"nozzle_temperature_initial_layer": "250",
+	"nozzle_temperature_range_high": "270",
+	"nozzle_temperature_range_low": "220",
+	"overhang_fan_speed": "90",
+	"overhang_fan_threshold": "25%",
+	"pressure_advance": "0.07",
+	"reduce_fan_stop_start_freq": "1",
+	"required_nozzle_HRC": "0",
+	"slow_down_for_layer_cooling": "1",
+	"slow_down_layer_time": "8",
+	"slow_down_min_speed": "20",
+	"support_material_interface_fan_speed": "-1",
+	"temperature_vitrification": "80",
+	"textured_plate_temp": "70",
+	"textured_plate_temp_initial_layer": "70"
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @Creality K2 Pro 0.4 nozzle.json b/resources/profiles/Creality/filament/CR-PETG @Creality K2 Pro 0.4 nozzle.json
new file mode 100644
index 0000000000..c76760c648
--- /dev/null
+++ b/resources/profiles/Creality/filament/CR-PETG @Creality K2 Pro 0.4 nozzle.json	
@@ -0,0 +1,108 @@
+{
+	"type": "filament",
+	"filament_id": "06001",
+	"setting_id": "GFSA04",
+	"name": "CR-PETG @Creality K2 Pro 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_petg",
+	"activate_air_filtration": "0",
+	"activate_chamber_temp_control": "1",
+	"additional_cooling_fan_speed": "0",
+	"chamber_temperature": "35",
+	"close_fan_the_first_x_layers": "3",
+	"compatible_printers": [
+		"Creality K2 Pro 0.4 nozzle"
+	],
+	"complete_print_exhaust_fan_speed": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_plate_temp": "70",
+	"cool_plate_temp_initial_layer": "70",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"during_print_exhaust_fan_speed": "0",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "0",
+	"enable_special_area_additional_cooling_fan": "0",
+	"eng_plate_temp": "50",
+	"eng_plate_temp_initial_layer": "55",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"fan_cooling_layer_time": "30",
+	"fan_max_speed": "80",
+	"fan_min_speed": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_cost": "20",
+	"filament_density": "1.24",
+	"filament_deretraction_speed": "nil",
+	"filament_diameter": "1.75",
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_flow_ratio": "0.95",
+	"filament_is_support": "0",
+	"filament_load_time": "0",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_max_volumetric_speed": "18",
+	"filament_minimal_purge_on_wipe_tower": "15",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_before_wipe": "90%",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_retract_restart_extra": "nil",
+	"filament_retract_when_changing_layer": "nil",
+	"filament_retraction_length": "nil",
+	"filament_retraction_minimum_travel": "nil",
+	"filament_retraction_speed": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_soluble": "0",
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_toolchange_delay": "0",
+	"filament_type": [
+		"PETG"
+	],
+	"filament_unload_time": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": "nil",
+	"filament_wipe_distance": "nil",
+	"filament_z_hop": "nil",
+	"filament_z_hop_types": "Slope Lift",
+	"full_fan_speed_layer": "0",
+	"hot_plate_temp": "70",
+	"hot_plate_temp_initial_layer": "70",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]",
+	"nozzle_temperature": "250",
+	"nozzle_temperature_initial_layer": "250",
+	"nozzle_temperature_range_high": "270",
+	"nozzle_temperature_range_low": "220",
+	"overhang_fan_speed": "90",
+	"overhang_fan_threshold": "10%",
+	"pressure_advance": "0.07",
+	"reduce_fan_stop_start_freq": "1",
+	"required_nozzle_HRC": "0",
+	"slow_down_for_layer_cooling": "1",
+	"slow_down_layer_time": "12",
+	"slow_down_min_speed": "20",
+	"support_material_interface_fan_speed": "-1",
+	"temperature_vitrification": "60",
+	"textured_plate_temp": "70",
+	"textured_plate_temp_initial_layer": "70"
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @Creality K2 Pro 0.6 nozzle.json b/resources/profiles/Creality/filament/CR-PETG @Creality K2 Pro 0.6 nozzle.json
new file mode 100644
index 0000000000..f38a2752e2
--- /dev/null
+++ b/resources/profiles/Creality/filament/CR-PETG @Creality K2 Pro 0.6 nozzle.json	
@@ -0,0 +1,108 @@
+{
+	"type": "filament",
+	"filament_id": "06001",
+	"setting_id": "GFSA04",
+	"name": "CR-PETG @Creality K2 Pro 0.6 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_petg",
+	"activate_air_filtration": "0",
+	"activate_chamber_temp_control": "1",
+	"additional_cooling_fan_speed": "0",
+	"chamber_temperature": "35",
+	"close_fan_the_first_x_layers": "3",
+	"compatible_printers": [
+		"Creality K2 Pro 0.6 nozzle"
+	],
+	"complete_print_exhaust_fan_speed": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_plate_temp": "70",
+	"cool_plate_temp_initial_layer": "70",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"during_print_exhaust_fan_speed": "0",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"eng_plate_temp": "50",
+	"eng_plate_temp_initial_layer": "55",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"fan_cooling_layer_time": "30",
+	"fan_max_speed": "80",
+	"fan_min_speed": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_cost": "20",
+	"filament_density": "1.24",
+	"filament_deretraction_speed": "30",
+	"filament_diameter": "1.75",
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_flow_ratio": "0.95",
+	"filament_is_support": "0",
+	"filament_load_time": "0",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_max_volumetric_speed": "18",
+	"filament_minimal_purge_on_wipe_tower": "15",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_before_wipe": "90%",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_retract_restart_extra": "nil",
+	"filament_retract_when_changing_layer": "nil",
+	"filament_retraction_length": "0.6",
+	"filament_retraction_minimum_travel": "nil",
+	"filament_retraction_speed": "30",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_soluble": "0",
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_toolchange_delay": "0",
+	"filament_type": [
+		"PETG"
+	],
+	"filament_unload_time": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": "nil",
+	"filament_wipe_distance": "nil",
+	"filament_z_hop": "nil",
+	"filament_z_hop_types": "nil",
+	"full_fan_speed_layer": "0",
+	"hot_plate_temp": "70",
+	"hot_plate_temp_initial_layer": "70",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[1.5,220],[2.0,220],[2.5,250]]",
+	"nozzle_temperature": "250",
+	"nozzle_temperature_initial_layer": "250",
+	"nozzle_temperature_range_high": "270",
+	"nozzle_temperature_range_low": "220",
+	"overhang_fan_speed": "90",
+	"overhang_fan_threshold": "10%",
+	"pressure_advance": "0.05",
+	"reduce_fan_stop_start_freq": "1",
+	"required_nozzle_HRC": "0",
+	"slow_down_for_layer_cooling": "1",
+	"slow_down_layer_time": "12",
+	"slow_down_min_speed": "20",
+	"support_material_interface_fan_speed": "-1",
+	"temperature_vitrification": "60",
+	"textured_plate_temp": "70",
+	"textured_plate_temp_initial_layer": "70"
+}
diff --git a/resources/profiles/Creality/filament/CR-PETG @Creality K2 Pro 0.8 nozzle.json b/resources/profiles/Creality/filament/CR-PETG @Creality K2 Pro 0.8 nozzle.json
new file mode 100644
index 0000000000..6362c2dc62
--- /dev/null
+++ b/resources/profiles/Creality/filament/CR-PETG @Creality K2 Pro 0.8 nozzle.json	
@@ -0,0 +1,108 @@
+{
+	"type": "filament",
+	"filament_id": "06001",
+	"setting_id": "GFSA04",
+	"name": "CR-PETG @Creality K2 Pro 0.8 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_petg",
+	"activate_air_filtration": "0",
+	"activate_chamber_temp_control": "1",
+	"additional_cooling_fan_speed": "0",
+	"chamber_temperature": "35",
+	"close_fan_the_first_x_layers": "3",
+	"compatible_printers": [
+		"Creality K2 Pro 0.8 nozzle"
+	],
+	"complete_print_exhaust_fan_speed": "0",
+	"cool_cds_fan_start_at_height": "0.5",
+	"cool_plate_temp": "70",
+	"cool_plate_temp_initial_layer": "70",
+	"cool_special_cds_fan_speed": "0",
+	"customized_plate_temp": "0",
+	"customized_plate_temp_initial_layer": "0",
+	"default_filament_colour": "\"\"",
+	"during_print_exhaust_fan_speed": "0",
+	"enable_overhang_bridge_fan": "1",
+	"enable_pressure_advance": "1",
+	"enable_special_area_additional_cooling_fan": "0",
+	"eng_plate_temp": "50",
+	"eng_plate_temp_initial_layer": "55",
+	"epoxy_resin_plate_temp": "60",
+	"epoxy_resin_plate_temp_initial_layer": "60",
+	"fan_cooling_layer_time": "30",
+	"fan_max_speed": "80",
+	"fan_min_speed": "40",
+	"filament_cooling_final_speed": "3.4",
+	"filament_cooling_initial_speed": "2.2",
+	"filament_cooling_moves": "4",
+	"filament_cost": "14",
+	"filament_density": "1.23",
+	"filament_deretraction_speed": "nil",
+	"filament_diameter": "1.75",
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_flow_ratio": "0.95",
+	"filament_is_support": "0",
+	"filament_load_time": "0",
+	"filament_loading_speed": "28",
+	"filament_loading_speed_start": "3",
+	"filament_max_volumetric_speed": "18",
+	"filament_minimal_purge_on_wipe_tower": "15",
+	"filament_multitool_ramming": "0",
+	"filament_multitool_ramming_flow": "10",
+	"filament_multitool_ramming_volume": "10",
+	"filament_notes": "\"\"",
+	"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
+	"filament_retract_before_wipe": "nil",
+	"filament_retract_lift_above": "nil",
+	"filament_retract_lift_below": "nil",
+	"filament_retract_lift_enforce": "nil",
+	"filament_retract_restart_extra": "nil",
+	"filament_retract_when_changing_layer": "nil",
+	"filament_retraction_length": "0.8",
+	"filament_retraction_minimum_travel": "nil",
+	"filament_retraction_speed": "nil",
+	"filament_shrink": "100%",
+	"filament_shrinkage_compensation_z": "100%",
+	"filament_soluble": "0",
+	"filament_start_gcode": [
+		"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+	],
+	"filament_toolchange_delay": "0",
+	"filament_type": [
+		"PETG"
+	],
+	"filament_unload_time": "0",
+	"filament_unloading_speed": "90",
+	"filament_unloading_speed_start": "100",
+	"filament_vendor": [
+		"Creality"
+	],
+	"filament_wipe": "nil",
+	"filament_wipe_distance": "nil",
+	"filament_z_hop": "nil",
+	"filament_z_hop_types": "nil",
+	"full_fan_speed_layer": "0",
+	"hot_plate_temp": "70",
+	"hot_plate_temp_initial_layer": "70",
+	"material_flow_dependent_temperature": "0",
+	"material_flow_temp_graph": "[[2.0,220],[3.5,220],[4.0,240]]",
+	"nozzle_temperature": "240",
+	"nozzle_temperature_initial_layer": "240",
+	"nozzle_temperature_range_high": "270",
+	"nozzle_temperature_range_low": "220",
+	"overhang_fan_speed": "90",
+	"overhang_fan_threshold": "10%",
+	"pressure_advance": "0.028",
+	"reduce_fan_stop_start_freq": "1",
+	"required_nozzle_HRC": "0",
+	"slow_down_for_layer_cooling": "1",
+	"slow_down_layer_time": "12",
+	"slow_down_min_speed": "20",
+	"support_material_interface_fan_speed": "-1",
+	"temperature_vitrification": "80",
+	"textured_plate_temp": "70",
+	"textured_plate_temp_initial_layer": "70"
+}
diff --git a/resources/profiles/Creality/filament/Creality HF Generic PLA.json b/resources/profiles/Creality/filament/Creality HF Generic PLA.json
index a60cf558b3..d2446bf31f 100644
--- a/resources/profiles/Creality/filament/Creality HF Generic PLA.json	
+++ b/resources/profiles/Creality/filament/Creality HF Generic PLA.json	
@@ -29,5 +29,8 @@
 		"Creality CR-10 SE 0.4 nozzle",
 		"Creality CR-10 SE 0.6 nozzle",
 		"Creality CR-10 SE 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Creality"
 	]
 }
diff --git a/resources/profiles/Creality/filament/Creality HF Generic Speed PLA.json b/resources/profiles/Creality/filament/Creality HF Generic Speed PLA.json
index d82f8848f4..89f0dc1cac 100644
--- a/resources/profiles/Creality/filament/Creality HF Generic Speed PLA.json	
+++ b/resources/profiles/Creality/filament/Creality HF Generic Speed PLA.json	
@@ -29,5 +29,8 @@
 		"Creality CR-10 SE 0.4 nozzle",
 		"Creality CR-10 SE 0.6 nozzle",
 		"Creality CR-10 SE 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Creality"
 	]
 }