diff --git a/.vscode/settings.json b/.vscode/settings.json
index 0cae9d5..2c4254f 100644
--- a/.vscode/settings.json
+++ b/.vscode/settings.json
@@ -3,5 +3,8 @@
     "editor.detectIndentation": false,
     "editor.insertSpaces": true,
     "editor.tabSize": 4
-  }
+  },
+  "markdown.extension.list.indentationSize": 4,
+  "markdown.extension.toc.levels": "2..6",
+  "markdown.extension.toc.updateOnSave": true
 }
diff --git a/Home.md b/Home.md
index 93730b7..5c25663 100644
--- a/Home.md
+++ b/Home.md
@@ -5,12 +5,12 @@ OrcaSlicer is a powerful open source slicer for FFF (FDM) 3D Printers. This wiki
 - [Printer Settings](#printer-settings)
 - [Material Settings](#material-settings)
 - [Process Settings](#process-settings)
-  - [Quality Settings](#quality-settings)
-  - [Strength Settings](#strength-settings)
-  - [Speed Settings](#speed-settings)
-  - [Support Settings](#support-settings)
-  - [Multimaterial Settings](#multimaterial-settings)
-  - [Others Settings](#others-settings)
+    - [Quality Settings](#quality-settings)
+    - [Strength Settings](#strength-settings)
+    - [Speed Settings](#speed-settings)
+    - [Support Settings](#support-settings)
+    - [Multimaterial Settings](#multimaterial-settings)
+    - [Others Settings](#others-settings)
 - [Prepare](#prepare)
 - [Calibrations](#calibrations)
 - [General Settings](#general-settings)
diff --git a/calibration/input-shaping-calib.md b/calibration/input-shaping-calib.md
index 851e3ee..0cd7bcf 100644
--- a/calibration/input-shaping-calib.md
+++ b/calibration/input-shaping-calib.md
@@ -6,10 +6,10 @@ During high-speed movements, vibrations can cause a phenomenon called "ringing,"
 > RepRap can only set one frequency for both X and Y axes so you will need to select a frequency that works well for both axes.
 
 - [Types](#types)
-  - [Default](#default)
-  - [Version Table](#version-table)
+    - [Default](#default)
+    - [Version Table](#version-table)
 - [Calibration Steps](#calibration-steps)
-  - [Fixed-Time Motion](#fixed-time-motion)
+    - [Fixed-Time Motion](#fixed-time-motion)
 - [Credits](#credits)
 
 ## Types
diff --git a/calibration/pressure-advance-calib.md b/calibration/pressure-advance-calib.md
index 25331c7..9fbe79d 100644
--- a/calibration/pressure-advance-calib.md
+++ b/calibration/pressure-advance-calib.md
@@ -13,9 +13,9 @@ OrcaSlicer includes three approaches for calibrating the Pressure Advance value.
 > ![flowrate-Bambulab-uncheck](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/Flow-Rate/flowrate-Bambulab-uncheck.png?raw=true)
 
 - [Calibration](#calibration)
-  - [Tower method](#tower-method)
-  - [Pattern method](#pattern-method)
-  - [Line method](#line-method)
+    - [Tower method](#tower-method)
+    - [Pattern method](#pattern-method)
+    - [Line method](#line-method)
 
 ## Calibration
 
diff --git a/developer-reference/Built-in-placeholders-variables.md b/developer-reference/Built-in-placeholders-variables.md
index 8d153a7..286264a 100644
--- a/developer-reference/Built-in-placeholders-variables.md
+++ b/developer-reference/Built-in-placeholders-variables.md
@@ -4,8 +4,8 @@ Built-in placeholder variables exposed by OrcaSlicer when expanding custom G-cod
 
 - [Conventions](#conventions)
 - [Global Slicing State](#global-slicing-state)
-  - [Read Only](#read-only)
-  - [Read Write](#read-write)
+    - [Read Only](#read-only)
+    - [Read Write](#read-write)
 - [Slicing State](#slicing-state)
 - [Print Statistics](#print-statistics)
 - [Objects](#objects)
@@ -17,12 +17,12 @@ Built-in placeholder variables exposed by OrcaSlicer when expanding custom G-cod
 - [Preset Metadata](#preset-metadata)
 - [Filename Templates](#filename-templates)
 - [Custom G-code Contexts](#custom-g-code-contexts)
-  - [Layer-aware placeholders](#layer-aware-placeholders)
-  - [Toolchange and wipe tower placeholders](#toolchange-and-wipe-tower-placeholders)
-  - [Filament start/end placeholders](#filament-startend-placeholders)
-  - [Timelapse and wrapping detection](#timelapse-and-wrapping-detection)
-  - [Extrusion role changes](#extrusion-role-changes)
-  - [Pause / color change helpers](#pause--color-change-helpers)
+    - [Layer-aware placeholders](#layer-aware-placeholders)
+    - [Toolchange and wipe tower placeholders](#toolchange-and-wipe-tower-placeholders)
+    - [Filament start/end placeholders](#filament-startend-placeholders)
+    - [Timelapse and wrapping detection](#timelapse-and-wrapping-detection)
+    - [Extrusion role changes](#extrusion-role-changes)
+    - [Pause / color change helpers](#pause--color-change-helpers)
 
 ## Conventions
 
diff --git a/developer-reference/How-to-build.md b/developer-reference/How-to-build.md
index 13aa832..3b6dede 100644
--- a/developer-reference/How-to-build.md
+++ b/developer-reference/How-to-build.md
@@ -6,26 +6,26 @@ It includes tool requirements, setup commands, and build steps for each platform
 Whether you're a contributor or just want a custom build, this guide will help you compile OrcaSlicer successfully.
 
 - [Windows 64-bit](#windows-64-bit)
-  - [Windows Tools Required](#windows-tools-required)
-  - [Windows Hardware Requirements](#windows-hardware-requirements)
-  - [Windows Instructions](#windows-instructions)
+    - [Windows Tools Required](#windows-tools-required)
+    - [Windows Hardware Requirements](#windows-hardware-requirements)
+    - [Windows Instructions](#windows-instructions)
 - [MacOS 64-bit](#macos-64-bit)
-  - [MacOS Tools Required](#macos-tools-required)
-  - [MacOS Instructions](#macos-instructions)
-  - [Debugging in Xcode](#debugging-in-xcode)
+    - [MacOS Tools Required](#macos-tools-required)
+    - [MacOS Instructions](#macos-instructions)
+    - [Debugging in Xcode](#debugging-in-xcode)
 - [Linux](#linux)
-  - [Using Docker](#using-docker)
-    - [Docker Dependencies](#docker-dependencies)
-    - [Docker Instructions](#docker-instructions)
-  - [Troubleshooting](#troubleshooting)
-  - [Linux Build](#linux-build)
-    - [Dependencies](#dependencies)
-      - [Common dependencies across distributions](#common-dependencies-across-distributions)
-      - [Additional dependencies for specific distributions](#additional-dependencies-for-specific-distributions)
-    - [Linux Instructions](#linux-instructions)
-    - [Unit Testing](#unit-testing)
+    - [Using Docker](#using-docker)
+        - [Docker Dependencies](#docker-dependencies)
+        - [Docker Instructions](#docker-instructions)
+    - [Troubleshooting](#troubleshooting)
+    - [Linux Build](#linux-build)
+        - [Dependencies](#dependencies)
+            - [Common dependencies across distributions](#common-dependencies-across-distributions)
+            - [Additional dependencies for specific distributions](#additional-dependencies-for-specific-distributions)
+        - [Linux Instructions](#linux-instructions)
+        - [Unit Testing](#unit-testing)
 - [Portable User Configuration](#portable-user-configuration)
-  - [Example folder structure](#example-folder-structure)
+    - [Example folder structure](#example-folder-structure)
 
 ## Windows 64-bit
 
@@ -141,6 +141,7 @@ How to building with Visual Studio on Windows 64-bit.
 4. Open the solution in Visual Studio, set the build configuration to `Release` and run the `Local Windows Debugger`.  
    ![compile_vs_local_debugger](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/develop/compile_vs_local_debugger.png?raw=true)
 5. Your resulting executable will be located in:
+
    ```shell
    \build\src\Release\orca-slicer.exe
    ```
diff --git a/developer-reference/How-to-wiki.md b/developer-reference/How-to-wiki.md
index 4b6d716..ed11ede 100644
--- a/developer-reference/How-to-wiki.md
+++ b/developer-reference/How-to-wiki.md
@@ -10,25 +10,25 @@ We encourage developers and users to contribute by updating existing pages and a
 When adding new features, consider updating the wiki so users can access the latest guidance.
 
 - [Wiki Structure](#wiki-structure)
-  - [Home](#home)
-    - [Index and Navigation](#index-and-navigation)
-  - [File Naming and Organization](#file-naming-and-organization)
+    - [Home](#home)
+        - [Index and Navigation](#index-and-navigation)
+    - [File Naming and Organization](#file-naming-and-organization)
 - [Orca to Wiki Redirection](#orca-to-wiki-redirection)
 - [Formatting and Style](#formatting-and-style)
-  - [Markdown Formatting](#markdown-formatting)
-  - [Alerts and Callouts](#alerts-and-callouts)
+    - [Markdown Formatting](#markdown-formatting)
+    - [Alerts and Callouts](#alerts-and-callouts)
 - [Images](#images)
-  - [Image Sources](#image-sources)
-    - [OrcaSlicer Resources](#orcaslicer-resources)
-    - [Wiki Images](#wiki-images)
-      - [Image Naming](#image-naming)
-      - [Image Placement](#image-placement)
-      - [Linking Images](#linking-images)
-        - [Examples](#examples)
-  - [Avoid the Following](#avoid-the-following)
-    - [Resize Images](#resize-images)
-  - [Image Cropping and Highlighting](#image-cropping-and-highlighting)
-  - [Recommended Formats](#recommended-formats)
+    - [Image Sources](#image-sources)
+        - [OrcaSlicer Resources](#orcaslicer-resources)
+        - [Wiki Images](#wiki-images)
+            - [Image Naming](#image-naming)
+            - [Image Placement](#image-placement)
+            - [Linking Images](#linking-images)
+                - [Examples](#examples)
+    - [Avoid the Following](#avoid-the-following)
+        - [Resize Images](#resize-images)
+    - [Image Cropping and Highlighting](#image-cropping-and-highlighting)
+    - [Recommended Formats](#recommended-formats)
 - [Structuring Content](#structuring-content)
 - [Commands and Code Blocks](#commands-and-code-blocks)
 - [External Links](#external-links)
diff --git a/material_settings/cooling/material_cooling.md b/material_settings/cooling/material_cooling.md
index 309ac5d..7433a58 100644
--- a/material_settings/cooling/material_cooling.md
+++ b/material_settings/cooling/material_cooling.md
@@ -1,27 +1,27 @@
 # Material Cooling
 
 - [Material Cooling for Specific Layer](#material-cooling-for-specific-layer)
-  - [No cooling for the first](#no-cooling-for-the-first)
-  - [Full fan speed at layer](#full-fan-speed-at-layer)
+    - [No cooling for the first](#no-cooling-for-the-first)
+    - [Full fan speed at layer](#full-fan-speed-at-layer)
 - [Material Part Cooling Fan](#material-part-cooling-fan)
-  - [Fan speed threshold](#fan-speed-threshold)
-    - [Min fan speed threshold](#min-fan-speed-threshold)
-    - [Max fan speed threshold](#max-fan-speed-threshold)
-  - [Keep fan always on](#keep-fan-always-on)
-  - [Slow printing down for better layer cooling](#slow-printing-down-for-better-layer-cooling)
-  - [Don't slow down outer walls](#dont-slow-down-outer-walls)
-  - [Min print speed](#min-print-speed)
-  - [Force cooling for overhangs and bridges](#force-cooling-for-overhangs-and-bridges)
-  - [Overhang cooling activation threshold](#overhang-cooling-activation-threshold)
-  - [Overhangs and external bridges fan speed](#overhangs-and-external-bridges-fan-speed)
-  - [Internal bridges fan speed](#internal-bridges-fan-speed)
-  - [Support interface fan speed](#support-interface-fan-speed)
-  - [Ironing fan speed](#ironing-fan-speed)
-  - [Auxiliary part cooling fan](#auxiliary-part-cooling-fan)
-  - [Exhaust fan](#exhaust-fan)
-    - [Activate air filtration](#activate-air-filtration)
-    - [During print](#during-print)
-    - [Complete print](#complete-print)
+    - [Fan speed threshold](#fan-speed-threshold)
+        - [Min fan speed threshold](#min-fan-speed-threshold)
+        - [Max fan speed threshold](#max-fan-speed-threshold)
+    - [Keep fan always on](#keep-fan-always-on)
+    - [Slow printing down for better layer cooling](#slow-printing-down-for-better-layer-cooling)
+    - [Don't slow down outer walls](#dont-slow-down-outer-walls)
+    - [Min print speed](#min-print-speed)
+    - [Force cooling for overhangs and bridges](#force-cooling-for-overhangs-and-bridges)
+    - [Overhang cooling activation threshold](#overhang-cooling-activation-threshold)
+    - [Overhangs and external bridges fan speed](#overhangs-and-external-bridges-fan-speed)
+    - [Internal bridges fan speed](#internal-bridges-fan-speed)
+    - [Support interface fan speed](#support-interface-fan-speed)
+    - [Ironing fan speed](#ironing-fan-speed)
+    - [Auxiliary part cooling fan](#auxiliary-part-cooling-fan)
+    - [Exhaust fan](#exhaust-fan)
+        - [Activate air filtration](#activate-air-filtration)
+        - [During print](#during-print)
+        - [Complete print](#complete-print)
 
 ## Material Cooling for Specific Layer
 
diff --git a/material_settings/filament/material_flow_ratio_and_pressure_advance.md b/material_settings/filament/material_flow_ratio_and_pressure_advance.md
index d4bae08..ad28514 100644
--- a/material_settings/filament/material_flow_ratio_and_pressure_advance.md
+++ b/material_settings/filament/material_flow_ratio_and_pressure_advance.md
@@ -4,11 +4,11 @@ Flow ratio and pressure advance settings for the selected material.
 
 - [Flow Ratio](#flow-ratio)
 - [Pressure Advance](#pressure-advance)
-  - [Enable adaptive Pressure Advance (beta)](#enable-adaptive-pressure-advance-beta)
-    - [Enable adaptive pressure advance for overhangs (beta)](#enable-adaptive-pressure-advance-for-overhangs-beta)
-    - [Pressure advance for bridges](#pressure-advance-for-bridges)
-    - [Adaptive pressure advance measurements (beta)](#adaptive-pressure-advance-measurements-beta)
-      - [How to calibrate Adaptive Pressure Advance](#how-to-calibrate-adaptive-pressure-advance)
+    - [Enable adaptive Pressure Advance (beta)](#enable-adaptive-pressure-advance-beta)
+        - [Enable adaptive pressure advance for overhangs (beta)](#enable-adaptive-pressure-advance-for-overhangs-beta)
+        - [Pressure advance for bridges](#pressure-advance-for-bridges)
+        - [Adaptive pressure advance measurements (beta)](#adaptive-pressure-advance-measurements-beta)
+            - [How to calibrate Adaptive Pressure Advance](#how-to-calibrate-adaptive-pressure-advance)
 
 ## Flow Ratio
 
diff --git a/material_settings/multimaterial/material_multimaterial.md b/material_settings/multimaterial/material_multimaterial.md
index 18be529..ceaa78f 100644
--- a/material_settings/multimaterial/material_multimaterial.md
+++ b/material_settings/multimaterial/material_multimaterial.md
@@ -3,26 +3,26 @@
 This page documents the settings used when printing with multiple materials in Orca Slicer. It explains wipe-tower parameters, tool-change behaviour for both single-extruder and multi-extruder multimaterial setups, and ramming/purge options that help ensure reliable, contamination-free material changes.
 
 - [Multimaterial Wipe Tower Parameters](#multimaterial-wipe-tower-parameters)
-  - [Minimal purge on wipe tower](#minimal-purge-on-wipe-tower)
+    - [Minimal purge on wipe tower](#minimal-purge-on-wipe-tower)
 - [Multi Filament](#multi-filament)
 - [Tool change parameters with single extruder](#tool-change-parameters-with-single-extruder)
-  - [Loading speed at the start](#loading-speed-at-the-start)
-  - [Loading speed](#loading-speed)
-  - [Unloading speed at the start](#unloading-speed-at-the-start)
-  - [Unloading speed](#unloading-speed)
-  - [Delay after unloading](#delay-after-unloading)
-  - [Number of cooling moves](#number-of-cooling-moves)
-  - [Speed of the first cooling move](#speed-of-the-first-cooling-move)
-  - [Speed of the last cooling move](#speed-of-the-last-cooling-move)
-  - [Stamping loading speed](#stamping-loading-speed)
-  - [Stamping distance](#stamping-distance)
-  - [Ramming parameters](#ramming-parameters)
-    - [Total ramming](#total-ramming)
-    - [Ramming line](#ramming-line)
+    - [Loading speed at the start](#loading-speed-at-the-start)
+    - [Loading speed](#loading-speed)
+    - [Unloading speed at the start](#unloading-speed-at-the-start)
+    - [Unloading speed](#unloading-speed)
+    - [Delay after unloading](#delay-after-unloading)
+    - [Number of cooling moves](#number-of-cooling-moves)
+    - [Speed of the first cooling move](#speed-of-the-first-cooling-move)
+    - [Speed of the last cooling move](#speed-of-the-last-cooling-move)
+    - [Stamping loading speed](#stamping-loading-speed)
+    - [Stamping distance](#stamping-distance)
+    - [Ramming parameters](#ramming-parameters)
+        - [Total ramming](#total-ramming)
+        - [Ramming line](#ramming-line)
 - [Tool change parameters with multi extruder](#tool-change-parameters-with-multi-extruder)
-  - [Enable ramming for multi-tool setups](#enable-ramming-for-multi-tool-setups)
-    - [Multi-tool ramming volume](#multi-tool-ramming-volume)
-    - [Multi-tool ramming flow](#multi-tool-ramming-flow)
+    - [Enable ramming for multi-tool setups](#enable-ramming-for-multi-tool-setups)
+        - [Multi-tool ramming volume](#multi-tool-ramming-volume)
+        - [Multi-tool ramming flow](#multi-tool-ramming-flow)
 
 ## Multimaterial Wipe Tower Parameters
 
diff --git a/print_settings/others/others_settings_brim.md b/print_settings/others/others_settings_brim.md
index ba9cabc..bc61138 100644
--- a/print_settings/others/others_settings_brim.md
+++ b/print_settings/others/others_settings_brim.md
@@ -5,17 +5,17 @@ Brim is a flat layer printed around a model's base to improve adhesion to the pr
 ![brim](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/brim/brim.png?raw=true)
 
 - [Type](#type)
-  - [Auto](#auto)
-  - [Painted](#painted)
-  - [Outer](#outer)
-  - [Inner](#inner)
-  - [Outer and Inner](#outer-and-inner)
-  - [Mouse Ears](#mouse-ears)
-    - [Ear max angle](#ear-max-angle)
-    - [Ear detection radius](#ear-detection-radius)
+    - [Auto](#auto)
+    - [Painted](#painted)
+    - [Outer](#outer)
+    - [Inner](#inner)
+    - [Outer and Inner](#outer-and-inner)
+    - [Mouse Ears](#mouse-ears)
+        - [Ear max angle](#ear-max-angle)
+        - [Ear detection radius](#ear-detection-radius)
 - [Width](#width)
 - [Brim-Object Gap](#brim-object-gap)
-  - [Brim use EFC outline](#brim-use-efc-outline)
+    - [Brim use EFC outline](#brim-use-efc-outline)
 
 ## Type
 
diff --git a/print_settings/others/others_settings_fuzzy_skin.md b/print_settings/others/others_settings_fuzzy_skin.md
index ec978ce..7d28bdf 100644
--- a/print_settings/others/others_settings_fuzzy_skin.md
+++ b/print_settings/others/others_settings_fuzzy_skin.md
@@ -6,19 +6,19 @@ These settings control where the effect is applied, how the noise is generated,
 Useful for creating a textures or hide surface imperfections but will increase print time and will affect dimensional accuracy.
 
 - [Fuzzy Skin Mode](#fuzzy-skin-mode)
-  - [Contour](#contour)
-  - [Contour and Hole](#contour-and-hole)
-  - [All Walls](#all-walls)
-  - [Fuzzy Skin Generator Mode](#fuzzy-skin-generator-mode)
-  - [Displacement](#displacement)
-  - [Extrusion](#extrusion)
-  - [Combined](#combined)
+    - [Contour](#contour)
+    - [Contour and Hole](#contour-and-hole)
+    - [All Walls](#all-walls)
+    - [Fuzzy Skin Generator Mode](#fuzzy-skin-generator-mode)
+    - [Displacement](#displacement)
+    - [Extrusion](#extrusion)
+    - [Combined](#combined)
 - [Noise Type](#noise-type)
-  - [Classic](#classic)
-  - [Perlin](#perlin)
-  - [Billow](#billow)
-  - [Ridged Multifractal](#ridged-multifractal)
-  - [Voronoi](#voronoi)
+    - [Classic](#classic)
+    - [Perlin](#perlin)
+    - [Billow](#billow)
+    - [Ridged Multifractal](#ridged-multifractal)
+    - [Voronoi](#voronoi)
 - [Point distance](#point-distance)
 - [Skin thickness](#skin-thickness)
 - [Skin feature size](#skin-feature-size)
diff --git a/print_settings/others/others_settings_skirt.md b/print_settings/others/others_settings_skirt.md
index b1ad881..6a28fd7 100644
--- a/print_settings/others/others_settings_skirt.md
+++ b/print_settings/others/others_settings_skirt.md
@@ -4,8 +4,8 @@ A skirt is one or more additional perimeters printed around the model outline on
 
 - [Loops](#loops)
 - [Type](#type)
-  - [Combined](#combined)
-  - [Per object](#per-object)
+    - [Combined](#combined)
+    - [Per object](#per-object)
 - [Minimum extrusion Length](#minimum-extrusion-length)
 - [Distance](#distance)
 - [Start point](#start-point)
diff --git a/print_settings/others/others_settings_special_mode.md b/print_settings/others/others_settings_special_mode.md
index 9e4463a..065a28b 100644
--- a/print_settings/others/others_settings_special_mode.md
+++ b/print_settings/others/others_settings_special_mode.md
@@ -3,18 +3,18 @@
 These settings control advanced slicing and printing behaviours, such as how layers are processed, object printing order, and special effects like spiral vase mode.
 
 - [Slicing Mode](#slicing-mode)
-  - [Regular](#regular)
-  - [Close Holes](#close-holes)
-  - [Even Odd](#even-odd)
+    - [Regular](#regular)
+    - [Close Holes](#close-holes)
+    - [Even Odd](#even-odd)
 - [Print Sequence](#print-sequence)
-  - [By Layer](#by-layer)
-    - [Intra-layer order](#intra-layer-order)
-  - [By Object](#by-object)
+    - [By Layer](#by-layer)
+        - [Intra-layer order](#intra-layer-order)
+    - [By Object](#by-object)
 - [Spiral vase](#spiral-vase)
-  - [Smooth Spiral](#smooth-spiral)
-    - [Max XY Smoothing](#max-xy-smoothing)
-  - [Spiral starting flow ratio](#spiral-starting-flow-ratio)
-  - [Spiral finishing flow ratio](#spiral-finishing-flow-ratio)
+    - [Smooth Spiral](#smooth-spiral)
+        - [Max XY Smoothing](#max-xy-smoothing)
+    - [Spiral starting flow ratio](#spiral-starting-flow-ratio)
+    - [Spiral finishing flow ratio](#spiral-finishing-flow-ratio)
 - [Timelapse](#timelapse)
 
 ## Slicing Mode
diff --git a/print_settings/quality/quality_settings_overhangs.md b/print_settings/quality/quality_settings_overhangs.md
index 70c9e04..6696727 100644
--- a/print_settings/quality/quality_settings_overhangs.md
+++ b/print_settings/quality/quality_settings_overhangs.md
@@ -2,12 +2,12 @@
 
 - [Detect overhang wall](#detect-overhang-wall)
 - [Make overhang printable](#make-overhang-printable)
-  - [Maximum angle](#maximum-angle)
-  - [Hole area](#hole-area)
+    - [Maximum angle](#maximum-angle)
+    - [Hole area](#hole-area)
 - [Extra perimeters on overhangs](#extra-perimeters-on-overhangs)
 - [Reverse on even](#reverse-on-even)
-  - [Reverse internal only](#reverse-internal-only)
-  - [Reverse threshold](#reverse-threshold)
+    - [Reverse internal only](#reverse-internal-only)
+    - [Reverse threshold](#reverse-threshold)
 
 ## Detect overhang wall
 
@@ -76,6 +76,7 @@ This could result in uneven texture, sometimes considered worse than the full re
 
 > [!NOTE]
 > Only available when:
-> - [Detect overhang wall](#detect-overhang-wall) is enabled 
+>
+> - [Detect overhang wall](#detect-overhang-wall) is enabled
 > - [Reverse internal only](#reverse-internal-only) is disabled
 > If those conditions are not met, this setting will be hidden.
diff --git a/print_settings/quality/quality_settings_precision.md b/print_settings/quality/quality_settings_precision.md
index d81135a..b9ff9fd 100644
--- a/print_settings/quality/quality_settings_precision.md
+++ b/print_settings/quality/quality_settings_precision.md
@@ -6,11 +6,11 @@ This section covers the settings that affect the precision of your prints. These
 - [Resolution](#resolution)
 - [Arc fitting](#arc-fitting)
 - [X-Y Compensation](#x-y-compensation)
-  - [X-Y hole compensation](#x-y-hole-compensation)
-  - [X-Y contour compensation](#x-y-contour-compensation)
+    - [X-Y hole compensation](#x-y-hole-compensation)
+    - [X-Y contour compensation](#x-y-contour-compensation)
 - [Elephant foot compensation](#elephant-foot-compensation)
 - [Precise wall](#precise-wall)
-  - [Technical explanation](#technical-explanation)
+    - [Technical explanation](#technical-explanation)
 - [Precise Z Height](#precise-z-height)
 - [Polyholes](#polyholes)
 
diff --git a/print_settings/quality/quality_settings_seam.md b/print_settings/quality/quality_settings_seam.md
index 151f181..98ee70d 100644
--- a/print_settings/quality/quality_settings_seam.md
+++ b/print_settings/quality/quality_settings_seam.md
@@ -3,33 +3,33 @@
 Unless printed in spiral vase mode, every layer needs to begin somewhere and end somewhere. That start and end of the extrusion is what results in what visually looks like a seam on the perimeters. This section contains options to control the visual appearance of a seam.
 
 - [Seam Position](#seam-position)
-  - [Aligned](#aligned)
-  - [Aligned Back](#aligned-back)
-  - [Nearest](#nearest)
-  - [Back](#back)
-  - [Random](#random)
+    - [Aligned](#aligned)
+    - [Aligned Back](#aligned-back)
+    - [Nearest](#nearest)
+    - [Back](#back)
+    - [Random](#random)
 - [Modifiers](#modifiers)
-  - [Staggered inner seams](#staggered-inner-seams)
-  - [Seam gap](#seam-gap)
-  - [Scarf joint seam](#scarf-joint-seam)
-    - [Scarf joint seam Type](#scarf-joint-seam-type)
-    - [Conditional scarf joint](#conditional-scarf-joint)
-    - [Scarf joint speed](#scarf-joint-speed)
-    - [Scarf joint height](#scarf-joint-height)
-    - [Scarf around entire wall](#scarf-around-entire-wall)
-    - [Scarf length](#scarf-length)
-    - [Scarf steps](#scarf-steps)
-    - [Scarf joint flow ratio](#scarf-joint-flow-ratio)
-    - [Scarf joint for inner walls](#scarf-joint-for-inner-walls)
-  - [Role based wipe speed](#role-based-wipe-speed)
-  - [Wipe speed](#wipe-speed)
-  - [Wipe on loop (inward movement)](#wipe-on-loop-inward-movement)
-  - [Wipe Before External](#wipe-before-external)
+    - [Staggered inner seams](#staggered-inner-seams)
+    - [Seam gap](#seam-gap)
+    - [Scarf joint seam](#scarf-joint-seam)
+        - [Scarf joint seam Type](#scarf-joint-seam-type)
+        - [Conditional scarf joint](#conditional-scarf-joint)
+        - [Scarf joint speed](#scarf-joint-speed)
+        - [Scarf joint height](#scarf-joint-height)
+        - [Scarf around entire wall](#scarf-around-entire-wall)
+        - [Scarf length](#scarf-length)
+        - [Scarf steps](#scarf-steps)
+        - [Scarf joint flow ratio](#scarf-joint-flow-ratio)
+        - [Scarf joint for inner walls](#scarf-joint-for-inner-walls)
+    - [Role based wipe speed](#role-based-wipe-speed)
+    - [Wipe speed](#wipe-speed)
+    - [Wipe on loop (inward movement)](#wipe-on-loop-inward-movement)
+    - [Wipe Before External](#wipe-before-external)
 - [Tips](#tips)
 - [Troubleshooting Seam Performance](#troubleshooting-seam-performance)
-  - [Troubleshooting the Start of a Seam](#troubleshooting-the-start-of-a-seam)
-  - [Troubleshooting the End of a Seam](#troubleshooting-the-end-of-a-seam)
-  - [The Role of Wall Ordering in Seam Appearance](#the-role-of-wall-ordering-in-seam-appearance)
+    - [Troubleshooting the Start of a Seam](#troubleshooting-the-start-of-a-seam)
+    - [Troubleshooting the End of a Seam](#troubleshooting-the-end-of-a-seam)
+    - [The Role of Wall Ordering in Seam Appearance](#the-role-of-wall-ordering-in-seam-appearance)
 
 ## Seam Position
 
diff --git a/print_settings/quality/quality_settings_wall_and_surfaces.md b/print_settings/quality/quality_settings_wall_and_surfaces.md
index 0936852..449ed83 100644
--- a/print_settings/quality/quality_settings_wall_and_surfaces.md
+++ b/print_settings/quality/quality_settings_wall_and_surfaces.md
@@ -1,18 +1,18 @@
 # Wall and surfaces
 
 - [Walls printing order](#walls-printing-order)
-  - [Inner/Outer](#innerouter)
-  - [Inner/Outer/Inner](#innerouterinner)
-  - [Outer/Inner](#outerinner)
-  - [Print infill first](#print-infill-first)
+    - [Inner/Outer](#innerouter)
+    - [Inner/Outer/Inner](#innerouterinner)
+    - [Outer/Inner](#outerinner)
+    - [Print infill first](#print-infill-first)
 - [Wall loop direction](#wall-loop-direction)
 - [Surface flow ratio](#surface-flow-ratio)
 - [Only one wall](#only-one-wall)
-  - [Threshold](#threshold)
+    - [Threshold](#threshold)
 - [Avoid crossing walls](#avoid-crossing-walls)
-  - [Max detour length](#max-detour-length)
+    - [Max detour length](#max-detour-length)
 - [Small area flow compensation](#small-area-flow-compensation)
-  - [Flow Compensation Model](#flow-compensation-model)
+    - [Flow Compensation Model](#flow-compensation-model)
 
 ## Walls printing order
 
diff --git a/print_settings/quality/quality_settings_wall_generator.md b/print_settings/quality/quality_settings_wall_generator.md
index e6aa6db..996e06c 100644
--- a/print_settings/quality/quality_settings_wall_generator.md
+++ b/print_settings/quality/quality_settings_wall_generator.md
@@ -4,14 +4,14 @@ The Wall Generator defines how the outer and inner walls (perimeters) of the mod
 
 - [Classic](#classic)
 - [Arachne](#arachne)
-  - [Wall transitioning threshhold angle](#wall-transitioning-threshhold-angle)
-  - [Wall transitioning filter margin](#wall-transitioning-filter-margin)
-  - [Wall transitioning length](#wall-transitioning-length)
-  - [Wall distribution count](#wall-distribution-count)
-  - [Minimum wall width](#minimum-wall-width)
-    - [First layer minimum wall width](#first-layer-minimum-wall-width)
-  - [Minimum feature size](#minimum-feature-size)
-  - [Minimum wall length](#minimum-wall-length)
+    - [Wall transitioning threshhold angle](#wall-transitioning-threshhold-angle)
+    - [Wall transitioning filter margin](#wall-transitioning-filter-margin)
+    - [Wall transitioning length](#wall-transitioning-length)
+    - [Wall distribution count](#wall-distribution-count)
+    - [Minimum wall width](#minimum-wall-width)
+        - [First layer minimum wall width](#first-layer-minimum-wall-width)
+    - [Minimum feature size](#minimum-feature-size)
+    - [Minimum wall length](#minimum-wall-length)
 
 ## Classic
 
diff --git a/print_settings/speed/speed_settings_advanced.md b/print_settings/speed/speed_settings_advanced.md
index 0b16c5c..49c7bc6 100644
--- a/print_settings/speed/speed_settings_advanced.md
+++ b/print_settings/speed/speed_settings_advanced.md
@@ -10,8 +10,8 @@ This feature is especially helpful when printing at high accelerations and large
 ![ers-intro](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/ERS/ers-intro.png?raw=true)
 
 - [Theory](#theory)
-  - [Acceleration vs. Extrusion rate smoothing](#acceleration-vs-extrusion-rate-smoothing)
-  - [Pressure advance vs extrusion rate smoothing](#pressure-advance-vs-extrusion-rate-smoothing)
+    - [Acceleration vs. Extrusion rate smoothing](#acceleration-vs-extrusion-rate-smoothing)
+    - [Pressure advance vs extrusion rate smoothing](#pressure-advance-vs-extrusion-rate-smoothing)
 - [Finding the ideal Extrusion Rate smoothing value](#finding-the-ideal-extrusion-rate-smoothing-value)
 - [A note for Bowden printers using Marlin without pressure advance](#a-note-for-bowden-printers-using-marlin-without-pressure-advance)
 - [A note on ERS Segment length](#a-note-on-ers-segment-length)
diff --git a/print_settings/speed/speed_settings_jerk_xy.md b/print_settings/speed/speed_settings_jerk_xy.md
index 398760e..ba0f13a 100644
--- a/print_settings/speed/speed_settings_jerk_xy.md
+++ b/print_settings/speed/speed_settings_jerk_xy.md
@@ -29,12 +29,12 @@ This setting overrides firmware jerk values when different motion types need spe
 - [Cornering Control Types](#cornering-control-types)
 - [Key Effects](#key-effects)
 - [Default](#default)
-  - [Outer wall](#outer-wall)
-  - [Inner wall](#inner-wall)
-  - [Infill](#infill)
-  - [Top surface](#top-surface)
-  - [Initial layer](#initial-layer)
-  - [Travel](#travel)
+    - [Outer wall](#outer-wall)
+    - [Inner wall](#inner-wall)
+    - [Infill](#infill)
+    - [Top surface](#top-surface)
+    - [Initial layer](#initial-layer)
+    - [Travel](#travel)
 - [Junction Deviation](#junction-deviation)
 - [Useful links](#useful-links)
 
diff --git a/print_settings/speed/speed_settings_other_layers_speed.md b/print_settings/speed/speed_settings_other_layers_speed.md
index e7e2bd5..7507c6c 100644
--- a/print_settings/speed/speed_settings_other_layers_speed.md
+++ b/print_settings/speed/speed_settings_other_layers_speed.md
@@ -4,6 +4,7 @@
 
 > [!IMPORTANT]
 > Every speed setting is limited by several parameters like:
+>
 > - [Maximum Volumetric Speed](volumetric-speed-calib)
 > - Machine / Motion ability
 > - [Acceleration](speed_settings_acceleration)
@@ -13,7 +14,7 @@
 - [Outer wall](#outer-wall)
 - [Inner wall](#inner-wall)
 - [Small perimeters](#small-perimeters)
-  - [Small perimeters threshold](#small-perimeters-threshold)
+    - [Small perimeters threshold](#small-perimeters-threshold)
 - [Sparse infill](#sparse-infill)
 - [Internal solid infill](#internal-solid-infill)
 - [Top surface](#top-surface)
diff --git a/print_settings/speed/speed_settings_overhang_speed.md b/print_settings/speed/speed_settings_overhang_speed.md
index 6421de6..6b55822 100644
--- a/print_settings/speed/speed_settings_overhang_speed.md
+++ b/print_settings/speed/speed_settings_overhang_speed.md
@@ -1,8 +1,8 @@
 # Overhang Speed
 
 - [Slow down for overhang](#slow-down-for-overhang)
-  - [Slow down for curled perimeters](#slow-down-for-curled-perimeters)
-  - [Speed](#speed)
+    - [Slow down for curled perimeters](#slow-down-for-curled-perimeters)
+    - [Speed](#speed)
 - [Bridge speed](#bridge-speed)
 
 ## Slow down for overhang
diff --git a/print_settings/strength/strength_settings_advanced.md b/print_settings/strength/strength_settings_advanced.md
index 8c4d0b2..f93038a 100644
--- a/print_settings/strength/strength_settings_advanced.md
+++ b/print_settings/strength/strength_settings_advanced.md
@@ -4,7 +4,7 @@
 - [Bridge infill direction](#bridge-infill-direction)
 - [Minimum sparse infill threshold](#minimum-sparse-infill-threshold)
 - [Infill Combination](#infill-combination)
-  - [Max layer height](#max-layer-height)
+    - [Max layer height](#max-layer-height)
 - [Detect narrow internal solid infill](#detect-narrow-internal-solid-infill)
 - [Ensure vertical shell thickness](#ensure-vertical-shell-thickness)
 
diff --git a/print_settings/strength/strength_settings_infill.md b/print_settings/strength/strength_settings_infill.md
index 15dbea9..c5a89d7 100644
--- a/print_settings/strength/strength_settings_infill.md
+++ b/print_settings/strength/strength_settings_infill.md
@@ -4,21 +4,21 @@ Infill is the internal structure of a 3D print, providing strength and support.
 
 - [Sparse infill density](#sparse-infill-density)
 - [Fill Multiline](#fill-multiline)
-  - [Use cases](#use-cases)
-  - [Strategy](#strategy)
-    - [Classic Strategy](#classic-strategy)
-    - [Non-Crossing Strategy](#non-crossing-strategy)
+    - [Use cases](#use-cases)
+    - [Strategy](#strategy)
+        - [Classic Strategy](#classic-strategy)
+        - [Non-Crossing Strategy](#non-crossing-strategy)
 - [Direction and Rotation](#direction-and-rotation)
-  - [Direction](#direction)
-  - [Rotation](#rotation)
+    - [Direction](#direction)
+    - [Rotation](#rotation)
 - [Infill Wall Overlap](#infill-wall-overlap)
 - [Apply gap fill](#apply-gap-fill)
 - [Filter out tiny gaps](#filter-out-tiny-gaps)
 - [Anchor](#anchor)
 - [Internal Solid Infill](#internal-solid-infill)
 - [Extra Solid Infill](#extra-solid-infill)
-  - [Interval Pattern](#interval-pattern)
-  - [Explicit Layer List](#explicit-layer-list)
+    - [Interval Pattern](#interval-pattern)
+    - [Explicit Layer List](#explicit-layer-list)
 - [Sparse Infill Pattern](#sparse-infill-pattern)
 - [Credits](#credits)
 
@@ -216,12 +216,14 @@ Specify exact layer numbers (1-based) using comma-separated values. Each entry m
 ```
 
 > [!NOTE]
+>
 > - Layer numbers are 1-based (first layer is layer 1)
 > - `#K` is optional in both interval and explicit list entries (`N#` equals `N#1`)
 > - Solid layers are inserted in addition to the normal sparse infill pattern
 
 > [!TIP]
 > Use this feature to:
+>
 > - Add strength at stress concentration points
 > - Reinforce mounting holes or attachment points
 > - Create internal structure for functional parts
diff --git a/print_settings/strength/strength_settings_infill_rotation_template_metalanguage.md b/print_settings/strength/strength_settings_infill_rotation_template_metalanguage.md
index dd93a88..a8958a1 100644
--- a/print_settings/strength/strength_settings_infill_rotation_template_metalanguage.md
+++ b/print_settings/strength/strength_settings_infill_rotation_template_metalanguage.md
@@ -4,17 +4,17 @@ This metalanguage provides a way to define the [direction and rotation](strength
 
 - [Basic instructions](#basic-instructions)
 - [Quick examples](#quick-examples)
-  - [Defined angle](#defined-angle)
-  - [Runtime instructions](#runtime-instructions)
-  - [Joint sign](#joint-sign)
-  - [Counting](#counting)
-  - [Length modifier](#length-modifier)
+    - [Defined angle](#defined-angle)
+    - [Runtime instructions](#runtime-instructions)
+    - [Joint sign](#joint-sign)
+    - [Counting](#counting)
+    - [Length modifier](#length-modifier)
 - [Description of instructions and examples](#description-of-instructions-and-examples)
-  - [Simple absolute instructions](#simple-absolute-instructions)
-  - [Relative instructions](#relative-instructions)
-  - [Repetitive, adjusting and one-time instructions](#repetitive-adjusting-and-one-time-instructions)
-  - [Range instructions](#range-instructions)
-  - [Constant layer number instructions](#constant-layer-number-instructions)
+    - [Simple absolute instructions](#simple-absolute-instructions)
+    - [Relative instructions](#relative-instructions)
+    - [Repetitive, adjusting and one-time instructions](#repetitive-adjusting-and-one-time-instructions)
+    - [Range instructions](#range-instructions)
+    - [Constant layer number instructions](#constant-layer-number-instructions)
 - [Complex template examples](#complex-template-examples)
 - [Credits](#credits)
 
diff --git a/print_settings/strength/strength_settings_patterns.md b/print_settings/strength/strength_settings_patterns.md
index 6cc07fe..41518dc 100644
--- a/print_settings/strength/strength_settings_patterns.md
+++ b/print_settings/strength/strength_settings_patterns.md
@@ -74,6 +74,7 @@ Layer time variability refers to the differences in time it takes to print each
 
 > [!TIP]
 > You can see how this analysis was made in [infill-analysis](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/print_settings/strength/infill-analysis) folder:
+>
 > - [Infill calculator Project](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/print_settings/strength/infill-analysis/infill_calculator.3mf?raw=true) to generate the gcode files and images.
 > - [infill_desc_calculator.xlsx](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/print_settings/strength/infill-analysis/infill_desc_calculator.xlsx?raw=true) used to calculate the values above.  
 > - Time, and material usage where simulated with the same [Klipper Estimator](https://github.com/Annex-Engineering/klipper_estimator) values to maintain consistency.
diff --git a/print_settings/strength/strength_settings_walls.md b/print_settings/strength/strength_settings_walls.md
index 6e8b4f5..3be42e0 100644
--- a/print_settings/strength/strength_settings_walls.md
+++ b/print_settings/strength/strength_settings_walls.md
@@ -13,6 +13,7 @@ Adjusting wall settings can significantly affect layer adhesion, strength, appea
 
 "Wall loops" refers to the number of times the outer wall is printed in a loop.  
 Increasing the wall loops will:
+
 - Enhance:
     - Layer adhesion
     - Strength
@@ -27,6 +28,7 @@ When this option is enabled, the ensure vertical shell thickness option needs to
 
 > [!WARNING]
 > It's not recommended to use this option with:
+>
 > - [Lightning infill](strength_settings_patterns#lightning) as there is limited infill to anchor the extra perimeters to.
 > - **[Ensure vertical shell thickness: ALL](strength_settings_advanced#ensure-vertical-shell-thickness)**
 
diff --git a/print_settings/support/support_settings_advanced.md b/print_settings/support/support_settings_advanced.md
index b90a679..2bf7a68 100644
--- a/print_settings/support/support_settings_advanced.md
+++ b/print_settings/support/support_settings_advanced.md
@@ -3,7 +3,7 @@
 - [Z distance](#z-distance)
 - [Support wall loops](#support-wall-loops)
 - [Base Pattern](#base-pattern)
-  - [Base pattern spacing](#base-pattern-spacing)
+    - [Base pattern spacing](#base-pattern-spacing)
 - [Pattern angle](#pattern-angle)
 - [Interface layers](#interface-layers)
 - [Interface pattern](#interface-pattern)
diff --git a/print_settings/support/support_settings_support.md b/print_settings/support/support_settings_support.md
index e17fd79..a42bb8f 100644
--- a/print_settings/support/support_settings_support.md
+++ b/print_settings/support/support_settings_support.md
@@ -3,18 +3,18 @@
 Support structures are used in 3D printing to provide stability to overhangs and complex geometries.
 
 - [Type](#type)
-  - [Normal](#normal)
-  - [Tree](#tree)
-    - [Support critical regions only](#support-critical-regions-only)
-  - [Auto](#auto)
-  - [Manual](#manual)
+    - [Normal](#normal)
+    - [Tree](#tree)
+        - [Support critical regions only](#support-critical-regions-only)
+    - [Auto](#auto)
+    - [Manual](#manual)
 - [Style](#style)
-  - [Grid](#grid)
-  - [Snug](#snug)
-  - [Organic](#organic)
-  - [Tree Slim](#tree-slim)
-  - [Tree Strong](#tree-strong)
-  - [Tree Hybrid](#tree-hybrid)
+    - [Grid](#grid)
+    - [Snug](#snug)
+    - [Organic](#organic)
+    - [Tree Slim](#tree-slim)
+    - [Tree Strong](#tree-strong)
+    - [Tree Hybrid](#tree-hybrid)
 - [Threshold angle](#threshold-angle)
 - [Threshold overlap](#threshold-overlap)
 - [Initial layer density](#initial-layer-density)
diff --git a/printer_settings/basic information/printer_basic_information_accessory.md b/printer_settings/basic information/printer_basic_information_accessory.md
index 59488ac..666a84c 100644
--- a/printer_settings/basic information/printer_basic_information_accessory.md	
+++ b/printer_settings/basic information/printer_basic_information_accessory.md	
@@ -3,14 +3,14 @@
 - [Nozzle type](#nozzle-type)
 - [Nozzle HRC](#nozzle-hrc)
 - [Auxiliary Part Cooling Fan](#auxiliary-part-cooling-fan)
-  - [Auxiliary Fan](#auxiliary-fan)
-    - [Simple option (indexes only → fan0, fan2, fan3)](#simple-option-indexes-only--fan0-fan2-fan3)
-    - [Advanced option (Index ⇄ Name mapping)](#advanced-option-index--name-mapping)
-      - [Quick customization](#quick-customization)
-      - [Usage](#usage)
+    - [Auxiliary Fan](#auxiliary-fan)
+        - [Simple option (indexes only → fan0, fan2, fan3)](#simple-option-indexes-only--fan0-fan2-fan3)
+        - [Advanced option (Index ⇄ Name mapping)](#advanced-option-index--name-mapping)
+            - [Quick customization](#quick-customization)
+            - [Usage](#usage)
 - [Support controlling chamber temperature](#support-controlling-chamber-temperature)
-  - [Using Chamber Temperature Variables in Machine G-code](#using-chamber-temperature-variables-in-machine-g-code)
-  - [Klipper Chamber Temperature](#klipper-chamber-temperature)
+    - [Using Chamber Temperature Variables in Machine G-code](#using-chamber-temperature-variables-in-machine-g-code)
+    - [Klipper Chamber Temperature](#klipper-chamber-temperature)
 - [Support air filtration](#support-air-filtration)
 
 ## Nozzle type
@@ -58,14 +58,14 @@ With Klipper you can create macros that translate both the OrcaSlicer numeric fa
 - [Nozzle type](#nozzle-type)
 - [Nozzle HRC](#nozzle-hrc)
 - [Auxiliary Part Cooling Fan](#auxiliary-part-cooling-fan)
-  - [Auxiliary Fan](#auxiliary-fan)
-    - [Simple option (indexes only → fan0, fan2, fan3)](#simple-option-indexes-only--fan0-fan2-fan3)
-    - [Advanced option (Index ⇄ Name mapping)](#advanced-option-index--name-mapping)
-      - [Quick customization](#quick-customization)
-      - [Usage](#usage)
+    - [Auxiliary Fan](#auxiliary-fan)
+        - [Simple option (indexes only → fan0, fan2, fan3)](#simple-option-indexes-only--fan0-fan2-fan3)
+        - [Advanced option (Index ⇄ Name mapping)](#advanced-option-index--name-mapping)
+            - [Quick customization](#quick-customization)
+            - [Usage](#usage)
 - [Support controlling chamber temperature](#support-controlling-chamber-temperature)
-  - [Using Chamber Temperature Variables in Machine G-code](#using-chamber-temperature-variables-in-machine-g-code)
-  - [Klipper Chamber Temperature](#klipper-chamber-temperature)
+    - [Using Chamber Temperature Variables in Machine G-code](#using-chamber-temperature-variables-in-machine-g-code)
+    - [Klipper Chamber Temperature](#klipper-chamber-temperature)
 - [Support air filtration](#support-air-filtration)
 
 #### Simple option (indexes only → fan0, fan2, fan3)
diff --git a/printer_settings/basic information/printer_basic_information_adaptive_bed_mesh.md b/printer_settings/basic information/printer_basic_information_adaptive_bed_mesh.md
index 9f48898..c905bc7 100644
--- a/printer_settings/basic information/printer_basic_information_adaptive_bed_mesh.md	
+++ b/printer_settings/basic information/printer_basic_information_adaptive_bed_mesh.md	
@@ -10,9 +10,9 @@ The implementation is designed to be straightforward, requiring no additional pl
 - [Mesh margin](#mesh-margin)
 - [Available g-code variables for Adaptive Bed Mesh Command](#available-g-code-variables-for-adaptive-bed-mesh-command)
 - [Example of Adaptive Bed Mesh usage in OrcaSlicer](#example-of-adaptive-bed-mesh-usage-in-orcaslicer)
-  - [Marlin](#marlin)
-  - [Klipper](#klipper)
-  - [RRF](#rrf)
+    - [Marlin](#marlin)
+    - [Klipper](#klipper)
+    - [RRF](#rrf)
 
 ## Bed mesh
 
diff --git a/printer_settings/basic information/printer_basic_information_printable_space.md b/printer_settings/basic information/printer_basic_information_printable_space.md
index 6a2b5d7..31606d1 100644
--- a/printer_settings/basic information/printer_basic_information_printable_space.md	
+++ b/printer_settings/basic information/printer_basic_information_printable_space.md	
@@ -5,10 +5,10 @@ This section defines the printer’s physical build area and how the slicer maps
 Specify any excluded (unprintable) regions as a polygon so the arranger avoids them. Set the printable height to your maximum Z travel, and use Z offset to correct endstop inaccuracies (this value is added to every Z coordinate in exported G‑code). The best object position is a normalized [0–1] preference used by automatic arranging, and preferred orientation controls automatic Z-axis alignment on import.
 
 - [Printable area (Bed Shape)](#printable-area-bed-shape)
-  - [Shape](#shape)
-  - [Settings](#settings)
-  - [Texture](#texture)
-  - [Model](#model)
+    - [Shape](#shape)
+    - [Settings](#settings)
+    - [Texture](#texture)
+    - [Model](#model)
 - [Excluded bed area](#excluded-bed-area)
 - [Printable height](#printable-height)
 - [Support multi bed types](#support-multi-bed-types)
diff --git a/printer_settings/extruder/printer_extruder_retraction.md b/printer_settings/extruder/printer_extruder_retraction.md
index 6ea6333..035f09c 100644
--- a/printer_settings/extruder/printer_extruder_retraction.md
+++ b/printer_settings/extruder/printer_extruder_retraction.md
@@ -17,7 +17,7 @@ Filaments like PETG and TPU are more prone to stringing, so they may require lon
 - [Wipe distance](#wipe-distance)
 - [Retract amount before wipe](#retract-amount-before-wipe)
 - [Retraction When Switching Materials](#retraction-when-switching-materials)
-  - [Long retraction when cut (beta)](#long-retraction-when-cut-beta)
+    - [Long retraction when cut (beta)](#long-retraction-when-cut-beta)
 
 ## Length
 
diff --git a/printer_settings/motion ability/printer_motion_ability.md b/printer_settings/motion ability/printer_motion_ability.md
index 8d16524..539a673 100644
--- a/printer_settings/motion ability/printer_motion_ability.md	
+++ b/printer_settings/motion ability/printer_motion_ability.md	
@@ -4,12 +4,12 @@ Settings related to the motion capabilities of the printer.
 
 - [Emit limits to G-code](#emit-limits-to-g-code)
 - [Resonance Avoidance](#resonance-avoidance)
-  - [Resonance Avoidance Speed](#resonance-avoidance-speed)
+    - [Resonance Avoidance Speed](#resonance-avoidance-speed)
 - [Speed limitation](#speed-limitation)
 - [Acceleration limitation](#acceleration-limitation)
 - [Jerk limitation](#jerk-limitation)
-  - [Maximum Junction Deviation](#maximum-junction-deviation)
-  - [Maximum Jerk](#maximum-jerk)
+    - [Maximum Junction Deviation](#maximum-junction-deviation)
+    - [Maximum Jerk](#maximum-jerk)
 
 ## Emit limits to G-code