rms/OrcaSlicer_WIKI
1
0
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer_WIKI.git synced 2026-05-17 00:25:45 +03:00
Code Issues Packages Projects Releases Wiki Activity

Add selectable Monotonic-line note and reorganize doc (#216)

Browse Source
This commit is contained in:
Ian Bassi
2026-04-24 11:16:05 -03:00
committed by GitHub
parent 67995fe223
commit 68244b00dd
1 changed files with 10 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files

19
calibration/flow_ratio_calib.md
View File

@@ -6,17 +6,18 @@ A properly calibrated flow ratio ensures consistent layer adhesion and accurate
- Too **low** flow ratio causes under-extrusion, which leads to gaps, weak layers, and poor structural integrity.
- Too **high** flow ratio causes over-extrusion, resulting in excess material, rough surfaces, and dimensional inaccuracies.
- [Calibration Types](#calibration-types)
- [OrcaSlicer \> 2.3.0 Archimedean chords + YOLO (Recommended)](#orcaslicer--230-archimedean-chords--yolo-recommended)
- [OrcaSlicer \<= 2.3.0 Monotonic Line + 2-Pass Calibration](#orcaslicer--230-monotonic-line--2-pass-calibration)
- [Credits](#credits)
> [!WARNING]
> **BambuLab Printers:** Make sure you do **not** select the 'Flow calibration' option.
> ![flowrate-Bambulab-uncheck](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/Flow-Rate/flowrate-Bambulab-uncheck.png?raw=true)
> [!NOTE]
> After v2.3.0, the [Top Pattern](strength_settings_top_bottom_shells#surface-pattern) changed to [Archimedean chords](strength_settings_patterns#archimedean-chords) from [Monotonic Line](strength_settings_patterns#monotonic-line).
> [!IMPORTANT]
> NEW FEATURE: **Selectable pattern (Monotonic line)**
> Available in: Releases greater than **2.3.2** or [Nightly builds](https://github.com/OrcaSlicer/OrcaSlicer/releases/tag/nightly-builds).
- [Calibration Types](#calibration-types)
- [Archimedean chords + YOLO (Recommended)](#archimedean-chords--yolo-recommended)
- [Monotonic Line + 2-Pass Calibration](#monotonic-line--2-pass-calibration)
- [Credits](#credits)
## Calibration Types
@@ -25,7 +26,7 @@ A properly calibrated flow ratio ensures consistent layer adhesion and accurate
- **Perfectionist:** calibration range `[-0.04, +0.035]`, flow ratio step `0.005`.
- **2-Pass Calibration:** the legacy method, using two passes to determine the optimal flow ratio with the formula `OldFlowRatio * (100 + modifier) / 100`.
### OrcaSlicer > 2.3.0 Archimedean chords + YOLO (Recommended)
### Archimedean chords + YOLO (Recommended)
This method uses the [Archimedean Chords](strength_settings_patterns#archimedean-chords) pattern for flow ratio calibration with the YOLO (Recommended) approach.
@@ -49,7 +50,7 @@ This method uses the [Archimedean Chords](strength_settings_patterns#archimedean
> [!NOTE]
> The new Archimedean chords pattern uses a specific print order that prints the inner spiral last so you can check for material accumulation on the contact line at the end.
### OrcaSlicer <= 2.3.0 Monotonic Line + 2-Pass Calibration
### Monotonic Line + 2-Pass Calibration
This example uses the Monotonic Line pattern with the 2-Pass Calibration approach.