mirror of
https://github.com/OrcaSlicer/OrcaSlicer_WIKI.git
synced 2026-05-17 00:25:45 +03:00
Moved quick reference table (#242)
* Moved quick reference table To avoid 500 error at strength_settings_patterns. Apparently due being such a big page. * Update mkdocs.yml * Fixes
This commit is contained in:
Ian Bassi
@@ -190,6 +190,7 @@ nav:
|
||||
- Infill: print_settings/strength/strength_settings_infill.md
|
||||
- "Infill rotation template metalanguage": print_settings/strength/strength_settings_infill_rotation_template_metalanguage.md
|
||||
- Patterns: print_settings/strength/strength_settings_patterns.md
|
||||
- Reference: print_settings/strength/strength_settings_patterns_quick_reference.md
|
||||
- "Top and Bottom Shells": print_settings/strength/strength_settings_top_bottom_shells.md
|
||||
- Walls: print_settings/strength/strength_settings_walls.md
|
||||
- "Strength Advanced": print_settings/strength/strength_settings_advanced.md
|
||||
|
||||
Binary file not shown.
@@ -43,7 +43,7 @@ Infill density determines the amount of material used to fill the interior of a
|
||||
[Variable](built_in_placeholders_variables): `fill_multiline`.
|
||||
This setting allows the selected [infill pattern](#sparse-infill-pattern) to be generated using up to 10 parallel extrusion lines per path, while preserving both the defined [infill density](#sparse-infill-density) and the overall material usage.
|
||||
|
||||
To check which patterns support multiline infill, see the Patterns Quick Reference table in the [Infill Patterns Wiki List](strength_settings_patterns#patterns-quick-reference).
|
||||
To check which patterns support multiline infill, see the Patterns Quick Reference table in the [Infill Patterns Wiki List](strength_settings_patterns_quick_reference) or each pattern's specifics in the [Patterns section](strength_settings_patterns).
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -8,6 +8,9 @@ There is no one-size-fits-all solution, as the best pattern depends on the speci
|
||||
Many patterns may look similar and have similar overall specifications, but they can behave very differently in practice.
|
||||
As most settings in 3D printing, experience is the best way to determine which pattern works best for your specific needs.
|
||||
|
||||
> [!TIP]
|
||||
> Quickly compare patterns with the [Patterns Quick Reference Table](strength_settings_patterns_quick_reference).
|
||||
|
||||
## Analysis parameters
|
||||
|
||||
### Strength
|
||||
@@ -35,50 +38,6 @@ Layer time variability refers to the differences in time it takes to print each
|
||||
|
||||
|
||||
|
||||
## Patterns Quick Reference
|
||||
|
||||
| - | Pattern | Strength | Material Usage | Print Time | Layer time Variability | Multiline |
|
||||
|---|---|---|---|---|---|---|
|
||||
| <img alt="param_monotonic" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_monotonic.svg?raw=true" height="45"> | [Monotonic](#monotonic) | X-Y: <br> Z:  |  |  |  | N/A |
|
||||
| <img alt="param_monotonicline" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_monotonicline.svg?raw=true" height="45"> | [Monotonic line](#monotonic-line) | X-Y: <br> Z:  |  |  |  | N/A |
|
||||
| <img alt="param_rectilinear" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_rectilinear.svg?raw=true" height="45"> | [Rectilinear](#rectilinear) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_alignedrectilinear" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_alignedrectilinear.svg?raw=true" height="45"> | [Aligned Rectilinear](#aligned-rectilinear) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_zigzag" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_zigzag.svg?raw=true" height="45"> | [Zig Zag](#zig-zag) | X-Y: <br> Z:  |  |  |  | No |
|
||||
| <img alt="param_crosszag" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_crosszag.svg?raw=true" height="45"> | [Cross Zag](#cross-zag) | X-Y: <br> Z:  |  |  |  | No |
|
||||
| <img alt="param_lockedzag" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_lockedzag.svg?raw=true" height="45"> | [Locked Zag](#locked-zag) | X-Y: <br> Z:  |  |  |  | No |
|
||||
| <img alt="param_line" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_line.svg?raw=true" height="45"> | [Line](#line) | X-Y: <br> Z:  |  |  |  | No |
|
||||
| <img alt="param_grid" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_grid.svg?raw=true" height="45"> | [Grid](#grid) | X-Y: <br> Z:  |  |  |  | [Non-Crossing](strength_settings_infill#non-crossing-strategy) |
|
||||
| <img alt="param_triangles" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_triangles.svg?raw=true" height="45"> | [Triangles](#triangles) | X-Y: <br> Z:  |  |  |  | [Non-Crossing](strength_settings_infill#non-crossing-strategy) |
|
||||
| <img alt="param_tri-hexagon" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_tri-hexagon.svg?raw=true" height="45"> | [Tri-hexagon](#tri-hexagon) | X-Y: <br> Z:  |  |  |  | [Non-Crossing](strength_settings_infill#non-crossing-strategy) |
|
||||
| <img alt="param_cubic" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_cubic.svg?raw=true" height="45"> | [Cubic](#cubic) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_adaptivecubic" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_adaptivecubic.svg?raw=true" height="45"> | [Adaptive Cubic](#adaptive-cubic) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_quartercubic" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_quartercubic.svg?raw=true" height="45"> | [Quarter Cubic](#quarter-cubic) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_supportcubic" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_supportcubic.svg?raw=true" height="45"> | [Support Cubic](#support-cubic) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_lightning" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_lightning.svg?raw=true" height="45"> | [Lightning](#lightning) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_honeycomb" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_honeycomb.svg?raw=true" height="45"> | [Honeycomb](#honeycomb) | X-Y: <br> Z:  |  |  |  | [Non-Crossing](strength_settings_infill#non-crossing-strategy) |
|
||||
| <img alt="param_3dhoneycomb" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_3dhoneycomb.svg?raw=true" height="45"> | [3D Honeycomb](#3d-honeycomb) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_lateral-honeycomb" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_lateral-honeycomb.svg?raw=true" height="45"> | [Lateral Honeycomb](#lateral-honeycomb) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_lateral-lattice" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_lateral-lattice.svg?raw=true" height="45"> | [Lateral Lattice](#lateral-lattice) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_crosshatch" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_crosshatch.svg?raw=true" height="45"> | [Cross Hatch](#cross-hatch) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_tpmsd" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_tpmsd.svg?raw=true" height="45"> | [TPMS-D](#tpms-d) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_tpmsfk" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_tpmsfk.svg?raw=true" height="45"> | [TPMS-FK](#tpms-fk) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_gyroid" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_gyroid.svg?raw=true" height="45"> | [Gyroid](#gyroid) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_concentric" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_concentric.svg?raw=true" height="45"> | [Concentric](#concentric) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_hilbertcurve" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_hilbertcurve.svg?raw=true" height="45"> | [Hilbert Curve](#hilbert-curve) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_archimedeanchords" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_archimedeanchords.svg?raw=true" height="45"> | [Archimedean Chords](#archimedean-chords) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_octagramspiral" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_octagramspiral.svg?raw=true" height="45"> | [Octagram Spiral](#octagram-spiral) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
|
||||
> [!NOTE]
|
||||
> This estimations are based in a Cube model to maintain consistency.
|
||||
> This **WILL NOT** be the same for all models and only serves as a standard guideline.
|
||||
|
||||
> [!TIP]
|
||||
> You can see how this analysis was made in [infill-analysis](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/print_settings/strength/infill-analysis) folder:
|
||||
>
|
||||
> - [Infill calculator Project](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/print_settings/strength/infill-analysis/infill_calculator.3mf?raw=true) to generate the gcode files and images.
|
||||
> - [infill_desc_calculator.xlsx](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/print_settings/strength/infill-analysis/infill_desc_calculator.xlsx?raw=true) used to calculate the values above.
|
||||
> - Time, and material usage where simulated with the same [Klipper Estimator](https://github.com/Annex-Engineering/klipper_estimator) values to maintain consistency.
|
||||
|
||||
## Monotonic
|
||||
|
||||
[Rectilinear](#rectilinear) in a uniform direction for a smoother visual surface.
|
||||
|
||||
@@ -0,0 +1,42 @@
|
||||
## Patterns Quick Reference
|
||||
|
||||
| <img alt="param_monotonic" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_monotonic.svg?raw=true" height="45"> | [Monotonic](strength_settings_patterns#monotonic) | X-Y: <br> Z:  |  |  |  | N/A |
|
||||
|---|---|---|---|---|---|---|
|
||||
| <img alt="param_monotonicline" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_monotonicline.svg?raw=true" height="45"> | [Monotonic line](strength_settings_patterns#monotonic-line) | X-Y: <br> Z:  |  |  |  | N/A |
|
||||
| <img alt="param_rectilinear" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_rectilinear.svg?raw=true" height="45"> | [Rectilinear](strength_settings_patterns#rectilinear) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_alignedrectilinear" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_alignedrectilinear.svg?raw=true" height="45"> | [Aligned Rectilinear](strength_settings_patterns#aligned-rectilinear) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_zigzag" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_zigzag.svg?raw=true" height="45"> | [Zig Zag](strength_settings_patterns#zig-zag) | X-Y: <br> Z:  |  |  |  | No |
|
||||
| <img alt="param_crosszag" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_crosszag.svg?raw=true" height="45"> | [Cross Zag](strength_settings_patterns#cross-zag) | X-Y: <br> Z:  |  |  |  | No |
|
||||
| <img alt="param_lockedzag" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_lockedzag.svg?raw=true" height="45"> | [Locked Zag](strength_settings_patterns#locked-zag) | X-Y: <br> Z:  |  |  |  | No |
|
||||
| <img alt="param_line" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_line.svg?raw=true" height="45"> | [Line](strength_settings_patterns#line) | X-Y: <br> Z:  |  |  |  | No |
|
||||
| <img alt="param_grid" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_grid.svg?raw=true" height="45"> | [Grid](strength_settings_patterns#grid) | X-Y: <br> Z:  |  |  |  | [Non-Crossing](strength_settings_infill#non-crossing-strategy) |
|
||||
| <img alt="param_triangles" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_triangles.svg?raw=true" height="45"> | [Triangles](strength_settings_patterns#triangles) | X-Y: <br> Z:  |  |  |  | [Non-Crossing](strength_settings_infill#non-crossing-strategy) |
|
||||
| <img alt="param_tri-hexagon" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_tri-hexagon.svg?raw=true" height="45"> | [Tri-hexagon](strength_settings_patterns#tri-hexagon) | X-Y: <br> Z:  |  |  |  | [Non-Crossing](strength_settings_infill#non-crossing-strategy) |
|
||||
| <img alt="param_cubic" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_cubic.svg?raw=true" height="45"> | [Cubic](strength_settings_patterns#cubic) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_adaptivecubic" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_adaptivecubic.svg?raw=true" height="45"> | [Adaptive Cubic](strength_settings_patterns#adaptive-cubic) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_quartercubic" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_quartercubic.svg?raw=true" height="45"> | [Quarter Cubic](strength_settings_patterns#quarter-cubic) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_supportcubic" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_supportcubic.svg?raw=true" height="45"> | [Support Cubic](strength_settings_patterns#support-cubic) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_lightning" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_lightning.svg?raw=true" height="45"> | [Lightning](strength_settings_patterns#lightning) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_honeycomb" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_honeycomb.svg?raw=true" height="45"> | [Honeycomb](strength_settings_patterns#honeycomb) | X-Y: <br> Z:  |  |  |  | [Non-Crossing](strength_settings_infill#non-crossing-strategy) |
|
||||
| <img alt="param_3dhoneycomb" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_3dhoneycomb.svg?raw=true" height="45"> | [3D Honeycomb](strength_settings_patterns#3d-honeycomb) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_lateral-honeycomb" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_lateral-honeycomb.svg?raw=true" height="45"> | [Lateral Honeycomb](strength_settings_patterns#lateral-honeycomb) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_lateral-lattice" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_lateral-lattice.svg?raw=true" height="45"> | [Lateral Lattice](strength_settings_patterns#lateral-lattice) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_crosshatch" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_crosshatch.svg?raw=true" height="45"> | [Cross Hatch](strength_settings_patterns#cross-hatch) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_tpmsd" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_tpmsd.svg?raw=true" height="45"> | [TPMS-D](strength_settings_patterns#tpms-d) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_tpmsfk" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_tpmsfk.svg?raw=true" height="45"> | [TPMS-FK](strength_settings_patterns#tpms-fk) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_gyroid" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_gyroid.svg?raw=true" height="45"> | [Gyroid](strength_settings_patterns#gyroid) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_concentric" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_concentric.svg?raw=true" height="45"> | [Concentric](strength_settings_patterns#concentric) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_hilbertcurve" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_hilbertcurve.svg?raw=true" height="45"> | [Hilbert Curve](strength_settings_patterns#hilbert-curve) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_archimedeanchords" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_archimedeanchords.svg?raw=true" height="45"> | [Archimedean Chords](strength_settings_patterns#archimedean-chords) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
| <img alt="param_octagramspiral" src="https://github.com/OrcaSlicer/OrcaSlicer/blob/main/resources/images/param_octagramspiral.svg?raw=true" height="45"> | [Octagram Spiral](strength_settings_patterns#octagram-spiral) | X-Y: <br> Z:  |  |  |  | [Classic](strength_settings_infill#classic-strategy) |
|
||||
|
||||
> [!NOTE]
|
||||
> This estimations are based in a Cube model to maintain consistency.
|
||||
> This **WILL NOT** be the same for all models and only serves as a standard guideline.
|
||||
|
||||
> [!TIP]
|
||||
> You can see how this analysis was made in [infill-analysis](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/print_settings/strength/infill-analysis) folder:
|
||||
>
|
||||
> - [Infill calculator Project](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/print_settings/strength/infill-analysis/infill_calculator.3mf?raw=true) to generate the gcode files and images.
|
||||
> - [infill_desc_calculator.xlsx](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/print_settings/strength/infill-analysis/infill_desc_calculator.xlsx?raw=true) used to calculate the values above.
|
||||
> - Time, and material usage where simulated with the same [Klipper Estimator](https://github.com/Annex-Engineering/klipper_estimator) values to maintain consistency.
|
||||
Reference in New Issue
Block a user