1116cb8118
* Format final update * Update VSCode markdown extension settings Configured markdown TOC levels to 2-6 and enabled automatic TOC update on save in .vscode/settings.json.
1.8 KiB
Support Advanced
- Z distance
- Support wall loops
- Base Pattern
- Pattern angle
- Interface layers
- Interface pattern
- Interface spacing
- Normal support expansion
- Support/object XY distance
- Support/object first layer gap
- Don't support bridges
- Independent support layer height
Z distance
The Z gap between support interface and object.
Support wall loops
This setting specifies the count of support walls in the range of [0,2]. 0 means auto.
Base Pattern
Line pattern for the base of the support.
Base pattern spacing
Spacing between support lines.
Pattern angle
Use this setting to rotate the support pattern on the horizontal plane.
Interface layers
The number of interface layers.
Interface pattern
The pattern used for the support interface.
Interface spacing
Spacing of interface lines. Zero means solid interface.
Normal support expansion
Expand (+) or shrink (-) the horizontal span of normal support.
Support/object XY distance
XY separation between an object and its support.
Support/object first layer gap
XY separation between an object and its support at the first layer.
Don't support bridges
Don't support the whole bridge area which make support very large. Bridges can usually be printed directly without support if not very long.
Independent support layer height
Support layer uses layer height independent with object layer. This is to support customizing z-gap and save print time. This option will be invalid when the prime tower is enabled.