1116cb8118
* Format final update * Update VSCode markdown extension settings Configured markdown TOC levels to 2-6 and enabled automatic TOC update on save in .vscode/settings.json.
1.5 KiB
Motion Ability
Settings related to the motion capabilities of the printer.
Emit limits to G-code
If enabled, the machine limits will be emitted to G-code file. This option will be ignored if the G-code flavor is set to Klipper.
Resonance Avoidance
Resonance Avoidance Speed
By reducing the speed of the outer wall to avoid the resonance zone of the printer, ringing on the surface of the model are avoided.
Tip
Check the VFA Calibration.
Speed limitation
Safeguard maximum speeds for all axes. This will cap the speed set by the process if it exceeds these values.
Acceleration limitation
Safeguard maximum accelerations for all axes. This will cap the acceleration set by the process if it exceeds these values.
Jerk limitation
Safeguard maximum jerks for all axes.
Tip
Check the Cornering Calibration.
Maximum Junction Deviation
Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware. If your Marlin 2 printer uses Classic Jerk set this value to 0.)
Maximum Jerk
Maximum jerk for each axis (M205 X, Y, Z, E, only apply if JD = 0 for Marlin 2 Firmware)