VictoriaMetrics/docs/operator/resources/vmalert.md

sort, weight, title, menu

sort	weight	title	menu
2	2	VMAlert	docs parent weight operator-custom-resources 2

VMAlert

VMAlert - executes a list of given alerting or recording rules against configured address.

The VMAlert CRD declaratively defines a desired VMAlert setup to run in a Kubernetes cluster.

It has few required config options - datasource and notifier are required, for other config parameters check doc.

For each VMAlert resource, the Operator deploys a properly configured Deployment in the same namespace. The VMAlert Pods are configured to mount a list of Configmaps prefixed with <VMAlert-name>-number containing the configuration for alerting rules.

For each VMAlert resource, the Operator adds Service and VMServiceScrape in the same namespace prefixed with name <VMAlert-name>.

Specification

You can see the full actual specification of the VMAlert resource in the API docs -> VMAlert.

If you can't find necessary field in the specification of the custom resource, see Extra arguments section.

Also, you can check out the examples section.

Rules

The CRD specifies which VMRules should be covered by the deployed VMAlert instances based on label selection. The Operator then generates a configuration based on the included VMRules and updates the Configmaps containing the configuration. It continuously does so for all changes that are made to VMRules or to the VMAlert resource itself.

Alerting rules are filtered by selectors ruleNamespaceSelector and ruleSelector in VMAlert CRD definition. For selecting rules from all namespaces you must specify it to empty value:

spec:
  ruleNamespaceSelector: {}

VMRUle objects generate part of VMAlert configuration.

For filtering rules VMAlert uses selectors ruleNamespaceSelector and ruleSelector. It allows configuring rules access control across namespaces and different environments. Specification of selectors you can see in this doc.

In addition to the above selectors, the filtering of objects in a cluster is affected by the field selectAllByDefault of VMAlert spec and environment variable WATCH_NAMESPACE for operator.

Following rules are applied:

• If ruleNamespaceSelector and ruleSelector both undefined, then by default select nothing. With option set - spec.selectAllByDefault: true, select all vmrules.
• If ruleNamespaceSelector defined, ruleSelector undefined, then all vmrules are matching at namespaces for given ruleNamespaceSelector.
• If ruleNamespaceSelector undefined, ruleSelector defined, then all vmrules at VMAgent's namespaces are matching for given ruleSelector.
• If ruleNamespaceSelector and ruleSelector both defined, then only vmrules at namespaces matched ruleNamespaceSelector for given ruleSelector are matching.

Here's a more visual and more detailed view:

ruleNamespaceSelector	ruleSelector	selectAllByDefault	WATCH_NAMESPACE	Selected rules
undefined	undefined	false	undefined	nothing
undefined	undefined	true	undefined	all vmrules in the cluster
defined	undefined	any	undefined	all vmrules are matching at namespaces for given ruleNamespaceSelector
undefined	defined	any	undefined	all vmrules only at VMAlert's namespace are matching for given ruleSelector
defined	defined	any	undefined	all vmrules only at namespaces matched ruleNamespaceSelector for given ruleSelector are matching
any	undefined	any	defined	all vmrules only at VMAlert's namespace
any	defined	any	defined	all vmrules only at VMAlert's namespace for given ruleSelector are matching

More details about WATCH_NAMESPACE variable you can read in this doc.

Here are some examples of VMAlert configuration with selectors:

# select all rule objects in the cluster
apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAlert
metadata:
  name: vmalert-select-all
spec:
  # ...
  selectAllByDefault: true

---

# select all rule objects in specific namespace (my-namespace)
apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAlert
metadata:
  name: vmalert-select-ns
spec:
  # ...
  ruleNamespaceSelector: 
    matchLabels:
      kubernetes.io/metadata.name: my-namespace

High availability

VMAlert can be launched with multiple replicas without an additional configuration as far alertmanager is responsible for alert deduplication.

Note, if you want to use VMAlert with high-available VMAlertmanager, which has more than 1 replica. You have to specify all pod fqdns at VMAlert.spec.notifiers.[url]. Or you can use service discovery for notifier, examples:

• alertmanager:

  apiVersion: v1
  kind: Secret
  metadata:
    name: vmalertmanager-example-alertmanager
    labels:
      app: vm-operator
  type: Opaque
  stringData:
    alertmanager.yaml: |
      global:
        resolve_timeout: 5m
      route:
        group_by: ['job']
        group_wait: 30s
        group_interval: 5m
        repeat_interval: 12h
        receiver: 'webhook'
      receivers:
        - name: 'webhook'
          webhook_configs:
            - url: 'http://alertmanagerwh:30500/'
    # ...
  
  ---
  
  apiVersion: operator.victoriametrics.com/v1beta1
  kind: VMAlertmanager
  metadata:
    name: example
    namespace: default
    labels:
     usage: dedicated
  spec:
    replicaCount: 2
    configSecret: vmalertmanager-example-alertmanager
    configSelector: {}
    configNamespaceSelector: {}
    # ...
  

• vmalert with fqdns:

  apiVersion: operator.victoriametrics.com/v1beta1
  kind: VMAlert
  metadata:
    name: example-ha
    namespace: default
  spec:
    replicaCount: 2
    datasource:
      url: http://vmsingle-example.default.svc:8429
    notifiers:
      - url: http://vmalertmanager-example-0.vmalertmanager-example.default.svc:9093
      - url: http://vmalertmanager-example-1.vmalertmanager-example.default.svc:9093
    evaluationInterval: "10s"
    ruleSelector: {}
    # ...
  

• vmalert with service discovery:

  apiVersion: operator.victoriametrics.com/v1beta1
  kind: VMAlert
  metadata:
    name: example-ha
    namespace: default
  spec:
    replicaCount: 2
    datasource:
     url: http://vmsingle-example.default.svc:8429
    notifiers:
      - selector:
          namespaceSelector:
            matchNames: 
              - default
          labelSelector:
            matchLabels:
                usage: dedicated
    evaluationInterval: "10s"
    ruleSelector: {}
    # ...
  

In addition, you need to specify remoteWrite and remoteRead urls for restoring alert states after restarts:

apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAlert
metadata:
  name: example-ha
  namespace: default
spec:
  replicaCount: 2
  evaluationInterval: "10s"
  selectAllByDefault: true
  datasource:
    url: http://vmselect-demo.vm.svc:8481/select/0/prometheus
  notifiers:
    - url: http://vmalertmanager-example-0.vmalertmanager-example.default.svc:9093
    - url: http://vmalertmanager-example-1.vmalertmanager-example.default.svc:9093
  remoteWrite:
    url: http://vminsert-demo.vm.svc:8480/insert/0/prometheus
  remoteRead:
    url: http://vmselect-demo.vm.svc:8481/select/0/prometheus

More details about remoteWrite and remoteRead you can read in vmalert docs.

Version management

To set VMAlert version add spec.image.tag name from releases

apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAlert
metadata:
  name: example-vmalert
spec:
  image:
    repository: victoriametrics/victoria-metrics
    tag: v1.93.4
    pullPolicy: Always
  # ...

Also, you can specify imagePullSecrets if you are pulling images from private repo:

apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAlert
metadata:
  name: example-vmalert
spec:
  image:
    repository: victoriametrics/victoria-metrics
    tag: v1.93.4
    pullPolicy: Always
  imagePullSecrets:
    - name: my-repo-secret
# ...

Enterprise features

VMAlert supports features Reading rules from object storage and Multitenancy from VictoriaMetrics Enterprise.

For using Enterprise version of vmalert you need to change version of VMAlert to version with -enterprise suffix using Version management.

All the enterprise apps require -eula command-line flag to be passed to them. This flag acknowledges that your usage fits one of the cases listed on this page. So you can use extraArgs for passing this flag to VMAlert:

Reading rules from object storage

After that you can pass -rule command-line argument with s3:// or gs:// to VMAlert with extraArgs.

More details about reading rules from object storage you can read in vmalert docs.

Here are complete example for Reading rules from object storage:

apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAlert
metadata:
  name: vmalert-ent-example
spec:
  # enabling enterprise features
  image:
    # enterprise version of vmalert
    tag: v1.93.5-enterprise
  extraArgs:
    # should be true and means that you have the legal right to run a vmalert enterprise
    # that can either be a signed contract or an email with confirmation to run the service in a trial period
    # https://victoriametrics.com/legal/esa/
    eula: true
    
    # using enterprise features: Reading rules from object storage
    # more details about reading rules from object storage you can read on https://docs.victoriametrics.com/vmalert.html#reading-rules-from-object-storage
    rule: s3://bucket/dir/alert.rules
    
  # ...other fields...

Multitenancy

After enabling enterprise version you can use Multitenancy feature in VMAlert.

For that you need to set clusterMode commad-line flag with extraArgs and specify tenant field for groups in VMRule:

apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAlert
metadata:
  name: vmalert-ent-example
spec:
  # enabling enterprise features
  image:
    # enterprise version of vmalert
    tag: v1.93.5-enterprise
  extraArgs:
    # should be true and means that you have the legal right to run a vmalert enterprise
    # that can either be a signed contract or an email with confirmation to run the service in a trial period
    # https://victoriametrics.com/legal/esa/
    eula: true

    # using enterprise features: Multitenancy
    # more details about multitenancy you can read on https://docs.victoriametrics.com/vmalert.html#multitenancy
    clusterMode: true 

  # ...other fields...

---

apiVersion: operator.victoriametrics.com/v1beta1
kind: VMRule
metadata:
  name: vmrule-ent-example
spec:
  groups:
    - name: vmalert-1
      rules:
        # using enterprise features: Multitenancy
        # more details about multitenancy you can read on https://docs.victoriametrics.com/vmalert.html#multitenancy
        - tenant: 1
          alert: vmalert config reload error
          expr: delta(vmalert_config_last_reload_errors_total[5m]) > 0
          for: 10s
          labels:
            severity: major
            job:  "{{ $labels.job }}"
          annotations:
            value: "{{ $value }}"
            description: 'error reloading vmalert config, reload count for 5 min {{ $value }}'

Examples

apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAlert
metadata:
  name: example-vmalert
spec:
  replicaCount: 1
  datasource:
    url: "http://vmsingle-example-vmsingle-persisted.default.svc:8429"
  notifier:
    url: "http://vmalertmanager-example-alertmanager.default.svc:9093"
  evaluationInterval: "30s"
  selectAllByDefault: true