rms/OrcaSlicer
1
0
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-17 08:36:26 +03:00
Code Issues Packages Projects Releases Wiki Activity

Disable smooth sprial in input_shaping calibrations (#10748)

Browse Source 
* Disable spiral_mode_smooth in calibrations

Causes problems when using absolute distances (use_relative_e_distances = false).

* Add note about absolute E distances in Smooth Spiral
This commit is contained in:
Ian Bassi
2025-09-28 07:44:37 -03:00
committed by GitHub
parent 504b89af03
commit 15037283e7
2 changed files with 6 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
doc/print_settings/others/others_settings_special_mode.md
View File

@@ -68,6 +68,9 @@ This creates a smooth, vase-like appearance.
When enabled, Smooth Spiral smooths out X and Y moves as well, resulting in no visible seams even on non-vertical walls.
This produces the smoothest possible spiral print.
> [!NOTE]
> If you are using absolute e distances, the smoothing may not work as expected.
#### Max XY Smoothing
Maximum distance to move points in XY to achieve a smooth spiral. If expressed as a percentage, it is calculated relative to the nozzle diameter.

6
src/slic3r/GUI/Plater.cpp
View File

@@ -10258,7 +10258,7 @@ void Plater::calib_input_shaping_freq(const Calib_Params& params)
print_config->set_key_value("sparse_infill_density", new ConfigOptionPercent(0));
print_config->set_key_value("detect_thin_wall", new ConfigOptionBool(false));
print_config->set_key_value("spiral_mode", new ConfigOptionBool(true));
print_config->set_key_value("spiral_mode_smooth", new ConfigOptionBool(true));
print_config->set_key_value("spiral_mode_smooth", new ConfigOptionBool(false));
print_config->set_key_value("bottom_surface_pattern", new ConfigOptionEnum<InfillPattern>(ipRectilinear));
print_config->set_key_value("outer_wall_speed", new ConfigOptionFloat(200));
print_config->set_key_value("default_acceleration", new ConfigOptionFloat(2000));
@@ -10306,7 +10306,7 @@ void Plater::calib_input_shaping_damp(const Calib_Params& params)
print_config->set_key_value("sparse_infill_density", new ConfigOptionPercent(0));
print_config->set_key_value("detect_thin_wall", new ConfigOptionBool(false));
print_config->set_key_value("spiral_mode", new ConfigOptionBool(true));
print_config->set_key_value("spiral_mode_smooth", new ConfigOptionBool(true));
print_config->set_key_value("spiral_mode_smooth", new ConfigOptionBool(false));
print_config->set_key_value("bottom_surface_pattern", new ConfigOptionEnum<InfillPattern>(ipRectilinear));
print_config->set_key_value("outer_wall_speed", new ConfigOptionFloat(200));
print_config->set_key_value("default_acceleration", new ConfigOptionFloat(2000));
@@ -10355,7 +10355,7 @@ void Plater::calib_junction_deviation(const Calib_Params& params)
print_config->set_key_value("sparse_infill_density", new ConfigOptionPercent(0));
print_config->set_key_value("detect_thin_wall", new ConfigOptionBool(false));
print_config->set_key_value("spiral_mode", new ConfigOptionBool(true));
print_config->set_key_value("spiral_mode_smooth", new ConfigOptionBool(true));
print_config->set_key_value("spiral_mode_smooth", new ConfigOptionBool(false));
print_config->set_key_value("bottom_surface_pattern", new ConfigOptionEnum<InfillPattern>(ipRectilinear));
print_config->set_key_value("outer_wall_speed", new ConfigOptionFloat(200));
print_config->set_key_value("default_acceleration", new ConfigOptionFloat(2000));