mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-06-08 19:34:26 +03:00
harktech: add CR-PETG K2 profiles + fix HF Generic vendor categorization
Two follow-ups from #13744 review: 1. K2 firmware payloads reference "CR-PETG" by name (per DaviBe92's reverse-engineering work in k2-websocket-re, and a real Creality spool seen by @swilsonnc), but the profile was missing from the Creality filament set. Adds 10 K2-family variants: - K2: 0.4, 0.6, 0.8 nozzles - K2 Plus: 0.2, 0.4, 0.6, 0.8 nozzles - K2 Pro: 0.4, 0.6, 0.8 nozzles Profile values come from CrealityPrint v7.1.0 via @hamham999's parallel work in OrcaSlicer/OrcaSlicer#13581. Files re-indented with tabs and BOM stripped to match repo convention. 2. Creality HF Generic PLA and Creality HF Generic Speed PLA were missing filament_vendor: ["Creality"] so they appeared under "General" rather than "Creality" in the filament selector. Reported-by: swilsonnc, DaviBe92 (CR-PETG missing) Co-Authored-By: hamham999 <hamham999@users.noreply.github.com> Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
This commit is contained in:
grant0013
@@ -1396,42 +1396,82 @@
|
||||
"name": "CR-ABS @Creality K2 0.4 nozzle",
|
||||
"sub_path": "filament/CR-ABS @Creality K2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-PETG @Creality K2 0.4 nozzle",
|
||||
"sub_path": "filament/CR-PETG @Creality K2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-ABS @Creality K2 0.6 nozzle",
|
||||
"sub_path": "filament/CR-ABS @Creality K2 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-PETG @Creality K2 0.6 nozzle",
|
||||
"sub_path": "filament/CR-PETG @Creality K2 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-ABS @Creality K2 0.8 nozzle",
|
||||
"sub_path": "filament/CR-ABS @Creality K2 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-PETG @Creality K2 0.8 nozzle",
|
||||
"sub_path": "filament/CR-PETG @Creality K2 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-ABS @Creality K2 Plus 0.2 nozzle",
|
||||
"sub_path": "filament/CR-ABS @Creality K2 Plus 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-PETG @Creality K2 Plus 0.2 nozzle",
|
||||
"sub_path": "filament/CR-PETG @Creality K2 Plus 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-ABS @Creality K2 Plus 0.4 nozzle",
|
||||
"sub_path": "filament/CR-ABS @Creality K2 Plus 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-PETG @Creality K2 Plus 0.4 nozzle",
|
||||
"sub_path": "filament/CR-PETG @Creality K2 Plus 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-ABS @Creality K2 Plus 0.6 nozzle",
|
||||
"sub_path": "filament/CR-ABS @Creality K2 Plus 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-PETG @Creality K2 Plus 0.6 nozzle",
|
||||
"sub_path": "filament/CR-PETG @Creality K2 Plus 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-ABS @Creality K2 Plus 0.8 nozzle",
|
||||
"sub_path": "filament/CR-ABS @Creality K2 Plus 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-PETG @Creality K2 Plus 0.8 nozzle",
|
||||
"sub_path": "filament/CR-PETG @Creality K2 Plus 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-ABS @Creality K2 Pro 0.4 nozzle",
|
||||
"sub_path": "filament/CR-ABS @Creality K2 Pro 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-PETG @Creality K2 Pro 0.4 nozzle",
|
||||
"sub_path": "filament/CR-PETG @Creality K2 Pro 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-ABS @Creality K2 Pro 0.6 nozzle",
|
||||
"sub_path": "filament/CR-ABS @Creality K2 Pro 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-PETG @Creality K2 Pro 0.6 nozzle",
|
||||
"sub_path": "filament/CR-PETG @Creality K2 Pro 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-ABS @Creality K2 Pro 0.8 nozzle",
|
||||
"sub_path": "filament/CR-ABS @Creality K2 Pro 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-PETG @Creality K2 Pro 0.8 nozzle",
|
||||
"sub_path": "filament/CR-PETG @Creality K2 Pro 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "CR-Nylon @Creality K2 Plus 0.4 nozzle",
|
||||
"sub_path": "filament/CR-Nylon @Creality K2 Plus 0.4 nozzle.json"
|
||||
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "06001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PETG @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "70",
|
||||
"cool_plate_temp_initial_layer": "70",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "60",
|
||||
"epoxy_resin_plate_temp_initial_layer": "60",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "40",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "20",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "70",
|
||||
"hot_plate_temp_initial_layer": "70",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]",
|
||||
"nozzle_temperature": "250",
|
||||
"nozzle_temperature_initial_layer": "250",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "220",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.07",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "70",
|
||||
"textured_plate_temp_initial_layer": "70"
|
||||
}
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "06001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PETG @Creality K2 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "70",
|
||||
"cool_plate_temp_initial_layer": "70",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "60",
|
||||
"epoxy_resin_plate_temp_initial_layer": "60",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "40",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "14",
|
||||
"filament_density": "1.23",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.6",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "70",
|
||||
"hot_plate_temp_initial_layer": "70",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[1.5,220],[2.0,220],[2.5,250]]",
|
||||
"nozzle_temperature": "250",
|
||||
"nozzle_temperature_initial_layer": "250",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "220",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.05",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "80",
|
||||
"textured_plate_temp": "70",
|
||||
"textured_plate_temp_initial_layer": "70"
|
||||
}
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "06001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PETG @Creality K2 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "70",
|
||||
"cool_plate_temp_initial_layer": "70",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "60",
|
||||
"epoxy_resin_plate_temp_initial_layer": "60",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "40",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "14",
|
||||
"filament_density": "1.23",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.8",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "70",
|
||||
"hot_plate_temp_initial_layer": "70",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[2.0,220],[3.5,220],[4.0,240]]",
|
||||
"nozzle_temperature": "240",
|
||||
"nozzle_temperature_initial_layer": "240",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "220",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.028",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "80",
|
||||
"textured_plate_temp": "70",
|
||||
"textured_plate_temp_initial_layer": "70"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "06001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PETG @Creality K2 Plus 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "70",
|
||||
"cool_plate_temp_initial_layer": "60",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "0",
|
||||
"eng_plate_temp_initial_layer": "0",
|
||||
"epoxy_resin_plate_temp": "60",
|
||||
"epoxy_resin_plate_temp_initial_layer": "60",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "40",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "14",
|
||||
"filament_density": "1.23",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "1",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.8",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4 < printable_height) }\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "70",
|
||||
"hot_plate_temp_initial_layer": "70",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "250",
|
||||
"nozzle_temperature_initial_layer": "250",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "220",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.07",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "80",
|
||||
"textured_plate_temp": "70",
|
||||
"textured_plate_temp_initial_layer": "70"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "06001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PETG @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "70",
|
||||
"cool_plate_temp_initial_layer": "70",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "60",
|
||||
"epoxy_resin_plate_temp_initial_layer": "60",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "40",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "20",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "100",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4 < printable_height) }\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "70",
|
||||
"hot_plate_temp_initial_layer": "70",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "240",
|
||||
"nozzle_temperature_initial_layer": "240",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "220",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.07",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "70",
|
||||
"textured_plate_temp_initial_layer": "70"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "06001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PETG @Creality K2 Plus 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "70",
|
||||
"cool_plate_temp_initial_layer": "70",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "0",
|
||||
"eng_plate_temp_initial_layer": "0",
|
||||
"epoxy_resin_plate_temp": "60",
|
||||
"epoxy_resin_plate_temp_initial_layer": "60",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "40",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "14",
|
||||
"filament_density": "1.23",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4 < printable_height) }\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "70",
|
||||
"hot_plate_temp_initial_layer": "70",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "250",
|
||||
"nozzle_temperature_initial_layer": "250",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "220",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.052",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "80",
|
||||
"textured_plate_temp": "70",
|
||||
"textured_plate_temp_initial_layer": "70"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "06001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PETG @Creality K2 Plus 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "70",
|
||||
"cool_plate_temp_initial_layer": "70",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "0",
|
||||
"eng_plate_temp_initial_layer": "0",
|
||||
"epoxy_resin_plate_temp": "60",
|
||||
"epoxy_resin_plate_temp_initial_layer": "60",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "40",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "14",
|
||||
"filament_density": "1.23",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4 < printable_height) }\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "70",
|
||||
"hot_plate_temp_initial_layer": "70",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "250",
|
||||
"nozzle_temperature_initial_layer": "250",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "220",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.07",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "80",
|
||||
"textured_plate_temp": "70",
|
||||
"textured_plate_temp_initial_layer": "70"
|
||||
}
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "06001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PETG @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "70",
|
||||
"cool_plate_temp_initial_layer": "70",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "60",
|
||||
"epoxy_resin_plate_temp_initial_layer": "60",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "40",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "20",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "70",
|
||||
"hot_plate_temp_initial_layer": "70",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]",
|
||||
"nozzle_temperature": "250",
|
||||
"nozzle_temperature_initial_layer": "250",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "220",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.07",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "70",
|
||||
"textured_plate_temp_initial_layer": "70"
|
||||
}
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "06001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PETG @Creality K2 Pro 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "70",
|
||||
"cool_plate_temp_initial_layer": "70",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "60",
|
||||
"epoxy_resin_plate_temp_initial_layer": "60",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "40",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "20",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "30",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.6",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "70",
|
||||
"hot_plate_temp_initial_layer": "70",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[1.5,220],[2.0,220],[2.5,250]]",
|
||||
"nozzle_temperature": "250",
|
||||
"nozzle_temperature_initial_layer": "250",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "220",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.05",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "70",
|
||||
"textured_plate_temp_initial_layer": "70"
|
||||
}
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "06001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PETG @Creality K2 Pro 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "70",
|
||||
"cool_plate_temp_initial_layer": "70",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "60",
|
||||
"epoxy_resin_plate_temp_initial_layer": "60",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "40",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "14",
|
||||
"filament_density": "1.23",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.8",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "70",
|
||||
"hot_plate_temp_initial_layer": "70",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[2.0,220],[3.5,220],[4.0,240]]",
|
||||
"nozzle_temperature": "240",
|
||||
"nozzle_temperature_initial_layer": "240",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "220",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.028",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "80",
|
||||
"textured_plate_temp": "70",
|
||||
"textured_plate_temp_initial_layer": "70"
|
||||
}
|
||||
@@ -29,5 +29,8 @@
|
||||
"Creality CR-10 SE 0.4 nozzle",
|
||||
"Creality CR-10 SE 0.6 nozzle",
|
||||
"Creality CR-10 SE 0.8 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -29,5 +29,8 @@
|
||||
"Creality CR-10 SE 0.4 nozzle",
|
||||
"Creality CR-10 SE 0.6 nozzle",
|
||||
"Creality CR-10 SE 0.8 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
]
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user