Merge branch 'main' into fix/recursive_include

# Description

This PR enables building OrcaSlicer on Windows with the **clang-cl
(LLVM)**
toolchain and the **Ninja** generator, in addition to the existing MSVC
path.
Clang is already supported on Linux with this codebase, so this extends
that
support to Windows.

The changes fall into three categories. All are either no-ops on the
existing
MSVC/Visual Studio path or Windows/clang-cl-specific, so the standard
build is
not affected.

### 1. C++ conformance fixes
clang-cl is stricter than MSVC and rejects several constructs that
cl.exe
silently accepted. Each of these is non-conforming code that MSVC
tolerated:

* **Explicit template instantiation in `BoundingBox.cpp`** — clang-cl
does not
instantiate `BoundingBoxBase<Point, Points>::construct` through the same
  transitive path MSVC uses; added the explicit instantiation.
* **Eigen cast materialization in `AABBTreeLines.hpp`** — `.cast<T>()`
returns a
lazy `CwiseUnaryOp`, not a concrete `Matrix`; materialized it before
passing to
  `distance_to_squared`, which expects a concrete type.
* **`LabelItemType` underlying type in `PresetComboBoxes.hpp`** — gave
the enum
the same `std::size_t` underlying type as `Marker` to resolve a
narrowing
  conversion in a switch.
* **`T2A_` cast in `BaseException.cpp`** — explicit `static_cast<const
char*>` on
  the ATL conversion helper result.
* **Wide string literals in `GUI_App.cpp`** — used `L""` literals where
  concatenated with a `std::wstring` (`url_prefix`).

### 2. Build system / dependencies
* **Exclude clang-cl from MSVC-only CMake guards** — `if(MSVC)` is true
for
  clang-cl, so blocks applying cl.exe-only flags now exclude Clang.
* **Disable TBB LTCG** — oneTBB enables MSVC IPO/LTCG by default,
emitting
proprietary `/GL` bitcode objects that `lld-link` cannot consume.
Disabling IPO
produces native COFF, linkable by both `link.exe` and `lld-link`. TBB is
threading infrastructure, so the runtime impact of disabling LTCG is
negligible.
* **wxWidgets target path** — clang-cl uses the MSVC frontend variant on
Windows
but reports compiler id `Clang`, so wxWidgets looked under
`clang_x64_lib`
  instead of the `vc_x64_lib` layout the deps are built with.

### 3. Ninja generator support
* **Runtime DLL copy** — the DLL copy step was nested under
`CMAKE_CONFIGURATION_TYPES` (multi-config only), so single-config Ninja
skipped
copying OCCT/GMP/MPFR/WebView2/freetype DLLs next to the executable. Now
runs
  for both generator styles, guarded by `if(WIN32)`.
* **`build_release_vs.bat` Ninja target** — `ALL_BUILD` is a Visual
Studio
  target; Ninja uses `all`. The script failed with
  `ninja: error: unknown target 'ALL_BUILD'` when invoked with `-x`.

## Tests

Built from a clean checkout on Windows with:
* clang-cl 22 (LLVM toolchain bundled with Visual Studio 18)
* Ninja Multi-Config generator
* lld-link as the linker

The full build (deps + slicer) compiles, `OrcaSlicer.dll` links with
`lld-link`,
and `orca-slicer.exe` runs. Verified end-to-end by loading a model,
slicing it,
and generating valid G-code (screenshot below).

The existing MSVC / Visual Studio build path is unaffected — all changes
are
guarded by compiler/generator/platform checks or are conformance fixes
that
compile identically under MSVC.

# Screenshots
<img width="1919" height="1079" alt="image"
src="https://github.com/user-attachments/assets/02082437-db36-4696-a91a-d9acf57d4a52"
/>

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -32,9 +32,17 @@ body:
     attributes:
       label: OrcaSlicer Version
       description: Which version of Orca Slicer are you running? You can see the full version in `Help` -> `About Orca Slicer`.
-      placeholder: e.g. 1.9.0
+      placeholder: e.g. 2.5.0
     validations:
       required: true
+  - type: input
+    id: working_version
+    attributes:
+      label: Regression compared to a previous version
+      description: Did it work in a previous version?
+      placeholder: e.g. 2.3.2
+    validations:
+      required: false
   - type: dropdown
     id: os_type
     attributes:

.github/workflows/check_profiles.yml

@@ -1,8 +1,12 @@
 name: Check profiles
 on:
   pull_request:
+    # release/* is included because pr-merge-bot.yml lets delegates merge into
+    # it, and it gates on this workflow's result. Without it a delegated merge
+    # into a release branch would run no profile validation at all.
     branches:
     - main
+    - release/*
     paths:
     - 'resources/profiles/**'
     - ".github/workflows/check_profiles.yml"
@@ -20,6 +24,8 @@ permissions:
 
 jobs:
   check_profiles:
+    # This job name is the check-run name pr-merge-bot.yml requires before a
+    # delegated merge. Renaming it silently disables that gate.
     name: Check profiles
     runs-on: ubuntu-24.04
     steps:

.github/workflows/pr-merge-bot.yml

@@ -0,0 +1,510 @@
+name: PR Merge Bot
+
+# Merges a pull request on request from a delegated vendor profile maintainer.
+# The merge is performed by this workflow's GITHUB_TOKEN, so a delegate needs no
+# repository access.
+#
+# Commands, posted as a comment on the PR:
+#   /bot merge              squash-merge the PR
+#   /bot merge --dry-run    report the verdict without merging
+#
+# Merges only when the commenter holds a grant covering every changed path, the
+# PR targets main or release/*, and CI is green on the head commit. Otherwise it
+# comments naming the files that fell outside the grant.
+#
+# Grants come from the FOLDER_MERGERS variable in the `merge-delegation`
+# environment: one per line, `account: path`, `#` comments and blank lines
+# allowed. Paths may contain spaces. A vendor takes two grants, the folder and
+# its sibling bundle JSON:
+#
+#   # Acme profiles
+#   vendor-maintainer: resources/profiles/Acme/
+#   vendor-maintainer: resources/profiles/Acme.json
+#
+# Edit the grant list (environment scope, so admin only):
+#   gh variable set FOLDER_MERGERS --env merge-delegation --body "$(cat folder-mergers.txt)"
+#   gh variable get FOLDER_MERGERS --env merge-delegation
+#
+# Stop all merging without touching this file:
+#   gh variable set MERGE_BOT_DRY_RUN --body true
+
+on:
+  issue_comment:
+    types:
+      - created
+
+# One merge attempt per PR at a time, so two quick comments cannot race.
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.issue.number }}
+  cancel-in-progress: false
+
+jobs:
+  merge:
+    # Skips the job unless a PR comment mentions the command.
+    if: >-
+      github.repository == 'OrcaSlicer/OrcaSlicer'
+      && github.event.issue.pull_request != null
+      && contains(github.event.comment.body, '/bot merge')
+    permissions:
+      contents: write        # pulls.merge
+      pull-requests: write   # pulls.merge
+      issues: write          # feedback comment + reactions
+      actions: write         # re-dispatch build_all.yml after the merge
+    runs-on: ubuntu-latest
+    timeout-minutes: 10
+    # Supplies FOLDER_MERGERS. Must carry no protection rules, or every
+    # delegated merge would wait for a human reviewer.
+    environment: merge-delegation
+    steps:
+      - name: Merge PR on behalf of a folder delegate
+        uses: actions/github-script@v9
+        env:
+          # Read as env vars, never interpolated into the script body.
+          FOLDER_MERGERS: ${{ vars.FOLDER_MERGERS }}
+          MERGE_BOT_DRY_RUN: ${{ vars.MERGE_BOT_DRY_RUN }}
+        with:
+          script: |
+            function isPermissionDenied(error) {
+              return error && error.status === 403 && /Resource not accessible by integration/i.test(error.message || '');
+            }
+
+            const sleep = (ms) => new Promise((resolve) => setTimeout(resolve, ms));
+
+            const MARKER = '<!-- pr-merge-bot -->';
+            // No grant may reach outside this root.
+            const DELEGATABLE_ROOT = 'resources/profiles/';
+            const ALLOWED_BASE_BRANCH = /^(?:main|release\/.+)$/;
+            const MERGE_METHOD = 'squash';
+            const REQUIRED_CHECK = 'Check profiles';   // job name in check_profiles.yml
+            const MAX_CHANGED_FILES = 500;             // policy cap, well under listFiles' 3000
+            const LISTFILES_CAP = 3000;
+            const MAX_REPORTED_FILES = 12;
+            const MERGEABLE_ATTEMPTS = 5;
+            const MERGEABLE_DELAY_MS = 2000;
+            const OK_CONCLUSIONS = new Set(['success', 'neutral', 'skipped']);
+            const REGULAR_FILE_MODES = new Set(['100644', '100755']);
+
+            // Paths refused whatever the grants say. Checked before grants, so
+            // delegating a new root means removing it from this list too.
+            const DENIED_PATTERNS = [
+              /^\.github\//,
+              /(^|\/)\.git(attributes|modules|ignore|config)$/,
+              /^(?:src|deps|deps_src|tests|tools|cmake|sandboxes|scripts|docs?|localization|bbl)\//,
+              /(^|\/)cmakelists\.txt$/,
+              /\.cmake$/,
+              /^build_[^/]*\.(?:sh|bat)$/,
+              /^version\.inc$/,
+              // Executables, including those inside the delegatable root.
+              /\.(?:sh|bash|bat|cmd|ps1|py|js|mjs|cjs|ts|rb|pl|php)$/
+            ];
+
+            function parseGrants(raw) {
+              // GitHub login: 1-39 chars, alphanumerics with single interior hyphens.
+              const loginPattern = /^[A-Za-z0-9](?:[A-Za-z0-9]|-(?=[A-Za-z0-9])){0,38}$/;
+              const grantsByLogin = new Map();
+              const problems = [];
+
+              (raw || '').split(/\r?\n/).forEach((rawLine, index) => {
+                const line = rawLine.trim();
+                if (!line || line.startsWith('#')) {
+                  return;
+                }
+
+                // Splits on the first colon only, so paths may contain ':' and spaces.
+                const separator = line.indexOf(':');
+                if (separator === -1) {
+                  problems.push(`line ${index + 1}: expected \`account: path\``);
+                  return;
+                }
+
+                const login = line.slice(0, separator).trim().replace(/^@/, '');
+                const path = line.slice(separator + 1).trim().replace(/\/+$/, '');
+
+                if (!loginPattern.test(login)) {
+                  problems.push(`line ${index + 1}: \`${login}\` is not a valid GitHub account name`);
+                  return;
+                }
+                if (/[\\*?\u0000-\u001f\u007f]/.test(path) || path.split('/').includes('..') || path.includes('//')) {
+                  problems.push(`line ${index + 1}: invalid path (no globs, \`..\`, \`//\`, backslashes or control characters)`);
+                  return;
+                }
+                // Rejects anything outside the root, and the bare root itself.
+                if (!path.startsWith(DELEGATABLE_ROOT) || path.length <= DELEGATABLE_ROOT.length) {
+                  problems.push(`line ${index + 1}: \`${path}\` is not inside \`${DELEGATABLE_ROOT}\``);
+                  return;
+                }
+
+                const key = login.toLowerCase();
+                grantsByLogin.set(key, (grantsByLogin.get(key) || []).concat(path));
+              });
+
+              return { grantsByLogin, problems };
+            }
+
+            function isDenied(path) {
+              if (/[\\\u0000-\u001f\u007f]/.test(path) || path.startsWith('/') || path.split('/').includes('..')) {
+                return true;
+              }
+
+              const normalized = path.normalize('NFKC').toLowerCase();
+              return DENIED_PATTERNS.some((pattern) => pattern.test(normalized));
+            }
+
+            // Byte-exact match on directory boundaries, so a grant of
+            // `.../Acme` covers neither `.../Acme Labs/x.json` nor `.../Acme.json`.
+            function isGranted(path, grants) {
+              return grants.some((grant) => path === grant || path.startsWith(`${grant}/`));
+            }
+
+            // Both endpoints of a rename; both must satisfy the grant.
+            function pathsFor(file) {
+              return [file.filename, file.previous_filename].filter(Boolean);
+            }
+
+            function formatList(items) {
+              const unique = [...new Set(items)];
+              const shown = unique.slice(0, MAX_REPORTED_FILES).map((item) => `- \`${item}\``);
+              if (unique.length > MAX_REPORTED_FILES) {
+                shown.push(`- …and ${unique.length - MAX_REPORTED_FILES} more`);
+              }
+              return shown.join('\n');
+            }
+
+            const { owner, repo } = context.repo;
+            const issue = context.payload.issue;
+            const comment = context.payload.comment;
+
+            if (!issue.pull_request) {
+              core.info('Ignoring comment that is not on a pull request.');
+              return;
+            }
+            // Ignores a comment whose sender is not its author.
+            if (context.payload.action !== 'created' || context.payload.sender.login !== comment.user.login) {
+              core.warning('Ignoring comment whose sender does not match its author.');
+              return;
+            }
+            if (comment.user.type !== 'User') {
+              core.info('Ignoring bot-authored command.');
+              return;
+            }
+
+            const commandLine = (comment.body || '')
+              .split('\n')
+              .map((line) => line.trim())
+              .find((line) => /^\/bot\s+merge\b/i.test(line));
+
+            if (!commandLine) {
+              core.info('No /bot merge command found.');
+              return;
+            }
+
+            const commenter = comment.user.login;
+            const { grantsByLogin, problems } = parseGrants(process.env.FOLDER_MERGERS);
+            const grants = grantsByLogin.get(commenter.toLowerCase()) || [];
+
+            for (const problem of problems) {
+              core.warning(`FOLDER_MERGERS ${problem}`);
+            }
+
+            // Says nothing to accounts with no grant, so it cannot be used to spam.
+            if (!grants.length) {
+              core.info(`Ignoring /bot merge from @${commenter}: not listed in FOLDER_MERGERS.`);
+              return;
+            }
+
+            // Warns instead of failing when the token cannot post feedback.
+            async function bestEffort(call, warning) {
+              try {
+                await call();
+              } catch (error) {
+                if (isPermissionDenied(error)) {
+                  core.warning(warning);
+                  return;
+                }
+
+                throw error;
+              }
+            }
+
+            const react = (content) => bestEffort(
+              () => github.rest.reactions.createForIssueComment({ owner, repo, comment_id: comment.id, content }),
+              `Cannot add the "${content}" reaction because the token cannot write.`);
+
+            const say = (body) => bestEffort(
+              () => github.rest.issues.createComment({ owner, repo, issue_number: issue.number, body: `${MARKER}\n${body}` }),
+              'Cannot post a comment because the token cannot write comments.');
+
+            // Declines the command: warns in the log, reacts, explains on the PR.
+            async function refuse(reason) {
+              const configNote = problems.length
+                ? `\n\n\`FOLDER_MERGERS\` also has problems a maintainer needs to fix:\n${problems.map((problem) => `- ${problem}`).join('\n')}`
+                : '';
+              const grantsNote = `\n\n<details><summary>Your current grants</summary>\n\n${formatList(grants)}\n\n</details>`;
+
+              core.warning(`Refused /bot merge from @${commenter}: ${reason}`);
+              await react('-1');
+              await say(`@${commenter} I can't merge this PR: ${reason}${configNote}${grantsNote}`);
+            }
+
+            await react('eyes');
+
+            const args = (commandLine.match(/^\/bot\s+merge\s*(.*)$/i)[1] || '').trim().split(/\s+/).filter(Boolean);
+            const unknownArgs = args.filter((arg) => arg.toLowerCase() !== '--dry-run');
+            const dryRun = String(process.env.MERGE_BOT_DRY_RUN || '').toLowerCase() === 'true'
+              || unknownArgs.length !== args.length;
+
+            if (unknownArgs.length) {
+              return refuse(
+                `I don't understand ${unknownArgs.map((arg) => `\`${arg}\``).join(', ')}. ` +
+                'Usage: `/bot merge` or `/bot merge --dry-run`.'
+              );
+            }
+
+            // Refuses everything while the grant list is malformed.
+            if (problems.length) {
+              return refuse(
+                'the `FOLDER_MERGERS` grant list has malformed lines, so I refuse every merge until it is fixed.'
+              );
+            }
+
+            let { data: pr } = await github.rest.pulls.get({
+              owner,
+              repo,
+              pull_number: issue.number
+            });
+
+            if (pr.merged) {
+              return refuse('it is already merged.');
+            }
+            if (pr.state !== 'open') {
+              return refuse(`its state is \`${pr.state}\`, not \`open\`.`);
+            }
+            if (pr.draft) {
+              return refuse('it is still a draft. Mark it ready for review first.');
+            }
+            if (!ALLOWED_BASE_BRANCH.test(pr.base.ref)) {
+              return refuse(`it targets \`${pr.base.ref}\`. Delegated merges are only allowed into \`main\` and \`release/*\`.`);
+            }
+
+            // ---- folder scope ----
+            const files = await github.paginate(github.rest.pulls.listFiles, {
+              owner,
+              repo,
+              pull_number: pr.number,
+              per_page: 100
+            });
+
+            if (!files.length) {
+              return refuse('it changes no files, so there is nothing to verify or merge.');
+            }
+            // Refuses when the file list is truncated or disagrees with the PR.
+            if (files.length >= LISTFILES_CAP || files.length !== pr.changed_files) {
+              return refuse(
+                `it reports ${pr.changed_files} changed files but the API listed ${files.length}, ` +
+                'so the file list is truncated and I cannot verify the folder scope. A maintainer must merge this one.'
+              );
+            }
+            if (pr.changed_files > MAX_CHANGED_FILES) {
+              return refuse(`it changes ${pr.changed_files} files; delegated merges are capped at ${MAX_CHANGED_FILES}.`);
+            }
+
+            const deniedFiles = [];
+            const outsideFiles = [];
+
+            for (const file of files) {
+              for (const path of pathsFor(file)) {
+                if (isDenied(path)) {
+                  deniedFiles.push(path);
+                } else if (!isGranted(path, grants)) {
+                  outsideFiles.push(path);
+                }
+              }
+            }
+
+            if (deniedFiles.length) {
+              core.error(`@${commenter} attempted a delegated merge touching protected paths: ${deniedFiles.join(', ')}`);
+              return refuse(
+                'it touches paths that are never delegatable, whatever the grants say ' +
+                `(CI, build, scripts or executable files):\n\n${formatList(deniedFiles)}\n\nA maintainer should look at this before it goes any further.`
+              );
+            }
+            if (outsideFiles.length) {
+              return refuse(
+                `${outsideFiles.length} changed path(s) fall outside your grants:\n\n${formatList(outsideFiles)}\n\n` +
+                'A vendor needs both grants: `resources/profiles/<Vendor>/` **and** `resources/profiles/<Vendor>.json`.'
+              );
+            }
+
+            // ---- file modes: rejects symlinks and submodules ----
+            // Fetches the delegatable subtree only; listFiles does not report modes.
+            const headSha = pr.head.sha;
+            const { data: tree } = await github.rest.git.getTree({
+              owner,
+              repo,
+              tree_sha: `${headSha}:${DELEGATABLE_ROOT.replace(/\/$/, '')}`,
+              recursive: 'true'
+            });
+
+            if (tree.truncated) {
+              return refuse('the git tree is too large to verify file modes. A maintainer must merge this one.');
+            }
+
+            // Entry paths are subtree-relative.
+            const modesByPath = new Map(tree.tree.map((entry) => [`${DELEGATABLE_ROOT}${entry.path}`, entry.mode]));
+            const irregularFiles = files
+              .filter((file) => file.status !== 'removed')
+              .map((file) => [file.filename, modesByPath.get(file.filename)])
+              .filter(([, mode]) => !REGULAR_FILE_MODES.has(mode))
+              .map(([path, mode]) => `${path} (mode ${mode || 'missing'})`);
+
+            if (irregularFiles.length) {
+              core.error(`@${commenter} attempted a delegated merge with non-regular files: ${irregularFiles.join(', ')}`);
+              return refuse(
+                `it adds symlinks, submodules or files I cannot verify:\n\n${formatList(irregularFiles)}\n\nA maintainer should look at this before it goes any further.`
+              );
+            }
+
+            // ---- mergeability: waits for GitHub to compute it ----
+            for (let attempt = 0; pr.mergeable === null && attempt < MERGEABLE_ATTEMPTS; attempt += 1) {
+              core.info(`Mergeability not computed yet; retrying in ${MERGEABLE_DELAY_MS}ms.`);
+              await sleep(MERGEABLE_DELAY_MS);
+              ({ data: pr } = await github.rest.pulls.get({
+                owner,
+                repo,
+                pull_number: pr.number
+              }));
+            }
+
+            if (pr.mergeable === null) {
+              return refuse('GitHub is still working out whether it can be merged. Try `/bot merge` again in a minute.');
+            }
+            if (!pr.mergeable) {
+              return refuse(`it is not mergeable (\`${pr.mergeable_state}\`) - most likely a conflict with \`${pr.base.ref}\`.`);
+            }
+
+            // ---- CI on the head commit ----
+            const checkRuns = await github.paginate(github.rest.checks.listForRef, {
+              owner,
+              repo,
+              ref: headSha,
+              filter: 'latest',
+              per_page: 100
+            });
+            const pendingChecks = checkRuns.filter((run) => run.status !== 'completed');
+            const failedChecks = checkRuns.filter((run) => run.status === 'completed' && !OK_CONCLUSIONS.has(run.conclusion));
+
+            if (pendingChecks.length) {
+              return refuse(
+                `${pendingChecks.length} check(s) are still running on \`${headSha.slice(0, 7)}\`:\n\n` +
+                `${formatList(pendingChecks.map((run) => run.name))}\n\nRe-run \`/bot merge\` once they finish.`
+              );
+            }
+            if (failedChecks.length) {
+              return refuse(
+                `${failedChecks.length} check(s) are not green on \`${headSha.slice(0, 7)}\`:\n\n` +
+                formatList(failedChecks.map((run) => `${run.name} (${run.conclusion})`))
+              );
+            }
+
+            const { data: combined } = await github.rest.repos.getCombinedStatusForRef({
+              owner,
+              repo,
+              ref: headSha
+            });
+            // total_count 0 only means there are no legacy statuses.
+            if (combined.total_count > 0 && combined.state !== 'success') {
+              return refuse(
+                `the combined commit status on \`${headSha.slice(0, 7)}\` is \`${combined.state}\`:\n\n` +
+                formatList(combined.statuses.filter((status) => status.state !== 'success')
+                  .map((status) => `${status.context} (${status.state})`))
+              );
+            }
+
+            // Requires the check to have actually run, not merely to have not failed.
+            const requiredCheck = checkRuns.find((run) =>
+              run.name === REQUIRED_CHECK &&
+              run.app && run.app.slug === 'github-actions' &&
+              run.status === 'completed' && OK_CONCLUSIONS.has(run.conclusion));
+
+            if (!requiredCheck) {
+              return refuse(
+                `the \`${REQUIRED_CHECK}\` check has not succeeded on \`${headSha.slice(0, 7)}\`. ` +
+                'If it never ran, a maintainer needs to approve the workflow run first.'
+              );
+            }
+
+            const scopeSummary = `${files.length} file(s), all within:\n${formatList(grants)}`;
+
+            if (dryRun) {
+              core.info('Dry run: every gate passed, not merging.');
+              await react('+1');
+              await say(
+                `@${commenter} **dry run** - this PR passes every gate and I *would* squash-merge it ` +
+                `at \`${headSha.slice(0, 7)}\`.\n\nVerified scope: ${scopeSummary}`
+              );
+              return;
+            }
+
+            // ---- re-validate, then merge ----
+            // An unchanged head SHA means the verified file list still holds.
+            const { data: fresh } = await github.rest.pulls.get({
+              owner,
+              repo,
+              pull_number: pr.number
+            });
+
+            if (fresh.head.sha !== headSha || fresh.base.ref !== pr.base.ref || fresh.state !== 'open' || fresh.merged || fresh.draft) {
+              return refuse('it changed while I was checking it. Nothing was merged - re-run `/bot merge`.');
+            }
+
+            let merged;
+            try {
+              // Pinned to the verified head: a moved head fails with 409.
+              ({ data: merged } = await github.rest.pulls.merge({
+                owner,
+                repo,
+                pull_number: pr.number,
+                sha: headSha,
+                merge_method: MERGE_METHOD,
+                commit_title: `${pr.title} (#${pr.number})`,
+                commit_message:
+                  `Merged by /bot merge on behalf of @${commenter} (id ${comment.user.id}).\n` +
+                  `Grants: ${grants.join(', ')}\nHead: ${headSha}\n`
+              }));
+            } catch (error) {
+              const hint = {
+                403: 'the workflow token cannot write to the repository.',
+                405: 'GitHub refused the merge - branch protection, a required review or check, a newly added CODEOWNERS file, or squash merging being disabled.',
+                409: `the head commit moved after I verified it (was \`${headSha.slice(0, 7)}\`).`,
+                422: 'GitHub rejected the merge as invalid.'
+              }[error.status];
+
+              if (!hint) {
+                throw error;
+              }
+
+              await refuse(`${hint}\n\n> ${error.message}\n\nNothing was merged.`);
+              core.setFailed(`Delegated merge failed: ${error.status} ${error.message}`);
+              return;
+            }
+
+            core.info(`Merged #${pr.number} as ${merged.sha}.`);
+            await react('rocket');
+            await say(
+              `@${commenter} squash-merged into \`${pr.base.ref}\` as ${merged.sha}.\n\nVerified scope: ${scopeSummary}`
+            );
+
+            // ---- re-kick the build ----
+            // A GITHUB_TOKEN merge fires no push event, so build_all.yml would
+            // otherwise never see these files.
+            try {
+              await github.rest.actions.createWorkflowDispatch({
+                owner,
+                repo,
+                workflow_id: 'build_all.yml',
+                ref: pr.base.ref
+              });
+              core.info(`Dispatched build_all.yml on ${pr.base.ref}.`);
+            } catch (error) {
+              core.warning(`Merged successfully, but dispatching build_all.yml failed: ${error.message}`);
+            }

AGENTS.md

@@ -56,6 +56,7 @@ ctest --test-dir ./tests/fff_print
 - Add helper functions or utilities only when existing code cannot reasonably be reused. Avoid duplication.
 - Keep code concise and clear. Manually simplify AI generated bloated codes before review.
 - Include targeted tests or documented verification for behavior changes, especially in slicing logic, profiles, formats, and GUI defaults.
+- For profile changes (`resources/profiles/<Vendor>/**`), check that `version` in the sibling `resources/profiles/<Vendor>.json` was bumped.
 - For translation changes (`localization/i18n/**/*.po`), check that recurring terms match the [Localization glossary](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/guides/localization_glossary.md) for that language.
 
 ## Localization & translations

CMakeLists.txt

@@ -80,8 +80,12 @@ endif()
 
 if (DEFINED BBL_RELEASE_TO_PUBLIC)
     add_compile_definitions("BBL_RELEASE_TO_PUBLIC=${BBL_RELEASE_TO_PUBLIC}")
+    if (BBL_RELEASE_TO_PUBLIC)
+        add_compile_definitions(WXINSPECTOR_DISABLE)
+    endif ()
 else ()
     add_compile_definitions("BBL_RELEASE_TO_PUBLIC=$<CONFIG:Release>")
+    add_compile_definitions("$<$<CONFIG:Release>:WXINSPECTOR_DISABLE>")
 endif ()
 
 find_package(Git)

build_release_vs.bat

@@ -152,7 +152,7 @@ echo on
 set CMAKE_POLICY_VERSION_MINIMUM=3.5
 if "%USE_NINJA%"=="1" (
     cmake .. -G %CMAKE_GENERATOR% -DORCA_TOOLS=ON %SIG_FLAG% -DBUILD_TESTS=%BUILD_TESTS% -DCMAKE_BUILD_TYPE=%build_type%
-    cmake --build . --config %build_type% --target ALL_BUILD
+    cmake --build . --config %build_type% --target all
 ) else (
     cmake .. -G %CMAKE_GENERATOR% -A %arch% -DORCA_TOOLS=ON %SIG_FLAG% -DBUILD_TESTS=%BUILD_TESTS% -DCMAKE_BUILD_TYPE=%build_type%
     cmake --build . --config %build_type% --target ALL_BUILD -- -m

deps/OpenSSL/OpenSSL.cmake

@@ -52,6 +52,14 @@ ExternalProject_Add(dep_OpenSSL
 	CONFIGURE_COMMAND ${_conf_cmd} ${_cross_arch}
         "--openssldir=${DESTDIR}"
         "--prefix=${DESTDIR}"
+        # OpenSSL's linux-x86_64 target sets multilib=64, so it installs to
+        # <prefix>/lib64 while every other dep uses <prefix>/lib. CPython's
+        # --with-openssl only ever emits -L<dir>/lib, so it misses the bundled
+        # static libs and silently links the system OpenSSL instead -- which,
+        # against 1.1.1w headers, leaves _ssl.so with an undefined
+        # SSL_get_peer_certificate (removed in OpenSSL 3.x). Pin libdir so the
+        # prefix stays single-layout.
+        "--libdir=lib"
         ${_cross_comp_prefix_line}
         no-shared
         no-asm

deps/TBB/MSVC.cmake

@@ -0,0 +1,98 @@
+# Copyright (c) 2020-2021 Intel Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set(TBB_LINK_DEF_FILE_FLAG ${CMAKE_LINK_DEF_FILE_FLAG})
+set(TBB_DEF_FILE_PREFIX win${TBB_ARCH})
+
+# Workaround for CMake issue https://gitlab.kitware.com/cmake/cmake/issues/18317.
+# TODO: consider use of CMP0092 CMake policy.
+string(REGEX REPLACE "/W[0-4]" "" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}")
+
+set(TBB_WARNING_LEVEL $<$<BOOL:${TBB_STRICT}>:/W4> $<$<BOOL:${TBB_STRICT}>:/WX>)
+
+# Warning suppression C4324: structure was padded due to alignment specifier
+set(TBB_WARNING_SUPPRESS /wd4324)
+set(TBB_TEST_COMPILE_FLAGS /bigobj)
+
+if (MSVC_VERSION LESS_EQUAL 1900)
+    # Warning suppression C4503 for VS2015 and earlier:
+    # decorated name length exceeded, name was truncated.
+    # More info can be found at
+    # https://docs.microsoft.com/en-us/cpp/error-messages/compiler-warnings/compiler-warning-level-1-c4503
+    set(TBB_TEST_COMPILE_FLAGS ${TBB_TEST_COMPILE_FLAGS} /wd4503)
+endif()
+
+set(TBB_LIB_COMPILE_FLAGS -D_CRT_SECURE_NO_WARNINGS /GS)
+set(TBB_COMMON_COMPILE_FLAGS /volatile:iso /FS /EHsc)
+
+# Ignore /WX set through add_compile_options() or added to CMAKE_CXX_FLAGS if TBB_STRICT is disabled.
+if (NOT TBB_STRICT AND COMMAND tbb_remove_compile_flag)
+    tbb_remove_compile_flag(/WX)
+endif()
+
+if (WINDOWS_STORE OR TBB_WINDOWS_DRIVER)
+    set(TBB_COMMON_COMPILE_FLAGS ${TBB_COMMON_COMPILE_FLAGS} /D_WIN32_WINNT=0x0A00)
+    set(TBB_COMMON_LINK_FLAGS -NODEFAULTLIB:kernel32.lib -INCREMENTAL:NO)
+    set(TBB_COMMON_LINK_LIBS OneCore.lib)
+endif()
+
+if (WINDOWS_STORE)
+    if (NOT CMAKE_SYSTEM_VERSION EQUAL 10.0)
+        message(FATAL_ERROR "CMAKE_SYSTEM_VERSION must be equal to 10.0")
+    endif()
+    set(TBB_COMMON_COMPILE_FLAGS ${TBB_COMMON_COMPILE_FLAGS} /ZW /ZW:nostdlib)
+    # CMake define this extra lib, remove it for this build type
+    string(REGEX REPLACE "WindowsApp.lib" "" CMAKE_CXX_STANDARD_LIBRARIES "${CMAKE_CXX_STANDARD_LIBRARIES}")
+
+    if (TBB_NO_APPCONTAINER)
+        set(TBB_LIB_LINK_FLAGS ${TBB_LIB_LINK_FLAGS} -APPCONTAINER:NO)
+    endif()
+endif()
+
+if (TBB_WINDOWS_DRIVER)
+    # Since this is universal driver disable this variable
+    set(CMAKE_SYSTEM_PROCESSOR "")
+    # CMake define list additional libs, remove it for this build type
+    set(CMAKE_CXX_STANDARD_LIBRARIES "")
+    set(TBB_COMMON_COMPILE_FLAGS ${TBB_COMMON_COMPILE_FLAGS} /D _UNICODE /DUNICODE /DWINAPI_FAMILY=WINAPI_FAMILY_APP /D__WRL_NO_DEFAULT_LIB__)
+endif()
+
+if (NOT DEFINED TBB_ENABLE_IPO)
+    if (DEFINED CMAKE_INTERPROCEDURAL_OPTIMIZATION)
+        set(TBB_ENABLE_IPO ${CMAKE_INTERPROCEDURAL_OPTIMIZATION})
+    else()
+        set(TBB_ENABLE_IPO ON)
+    endif()
+endif()
+
+if (TBB_ENABLE_IPO)
+    if (CMAKE_CXX_COMPILER_ID MATCHES "(Clang|IntelLLVM)")
+        if (CMAKE_SYSTEM_PROCESSOR MATCHES "(x86|AMD64)")
+            set(TBB_COMMON_COMPILE_FLAGS ${TBB_COMMON_COMPILE_FLAGS} -mrtm -mwaitpkg)
+        endif()
+        set(TBB_OPENMP_NO_LINK_FLAG TRUE)
+        set(TBB_IPO_COMPILE_FLAGS $<$<NOT:$<CONFIG:Debug>>:-flto>)
+    else()
+        set(TBB_IPO_COMPILE_FLAGS $<$<NOT:$<CONFIG:Debug>>:/GL>)
+        set(TBB_IPO_LINK_FLAGS $<$<NOT:$<CONFIG:Debug>>:-LTCG> $<$<NOT:$<CONFIG:Debug>>:-INCREMENTAL:NO>)
+    endif()
+else()
+    if (CMAKE_CXX_COMPILER_ID MATCHES "(Clang|IntelLLVM)" AND CMAKE_SYSTEM_PROCESSOR MATCHES "(x86|AMD64)")
+        set(TBB_COMMON_COMPILE_FLAGS ${TBB_COMMON_COMPILE_FLAGS} -mrtm -mwaitpkg)
+    endif()
+    set(TBB_IPO_COMPILE_FLAGS "")
+    set(TBB_IPO_LINK_FLAGS "")
+endif()
+
+set(TBB_OPENMP_FLAG /openmp)

deps/TBB/TBB.cmake

@@ -1,4 +1,6 @@
-if (FLATPAK AND "${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
+if (MSVC)
+    set(_patch_command ${CMAKE_COMMAND} -E copy ${CMAKE_CURRENT_LIST_DIR}/MSVC.cmake ./cmake/compilers/MSVC.cmake)
+elseif (FLATPAK AND "${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
     set(_patch_command ${CMAKE_COMMAND} -E copy ${CMAKE_CURRENT_LIST_DIR}/GNU.cmake ./cmake/compilers/GNU.cmake)
 else()
     set(_patch_command "")
@@ -13,6 +15,8 @@ orcaslicer_add_cmake_project(
         -DTBB_BUILD_SHARED=OFF
         -DTBB_BUILD_TESTS=OFF
         -DTBB_TEST=OFF
+        -DTBB_ENABLE_IPO=OFF
+        -DCMAKE_INTERPROCEDURAL_OPTIMIZATION=OFF
         -DCMAKE_POSITION_INDEPENDENT_CODE=ON
         -DCMAKE_DEBUG_POSTFIX=_debug
 )

deps/wxWidgets/0001-Clang-CL-fix.patch

@@ -0,0 +1,28 @@
+---
+ build/cmake/wxWidgetsConfig.cmake.in | 10 +++++++++-
+ 1 file changed, 10 insertions(+), 1 deletion(-)
+
+diff --git a/build/cmake/wxWidgetsConfig.cmake.in b/build/cmake/wxWidgetsConfig.cmake.in
+index 1a83f36..70ad8a4 100644
+--- a/build/cmake/wxWidgetsConfig.cmake.in
++++ b/build/cmake/wxWidgetsConfig.cmake.in
+@@ -58,7 +58,16 @@ if(WIN32_MSVC_NAMING)
+     endif()
+ endif()
+ 
+-include("${CMAKE_CURRENT_LIST_DIR}${wxPLATFORM_LIB_DIR}/@PROJECT_NAME@Targets.cmake")
++if (CMAKE_CXX_COMPILER_ID STREQUAL "Clang" AND CMAKE_CXX_COMPILER_FRONTEND_VARIANT STREQUAL "MSVC")
++    if (CMAKE_GENERATOR_PLATFORM STREQUAL "ARM64" OR CMAKE_VS_PLATFORM_NAME STREQUAL "ARM64" OR CMAKE_SYSTEM_PROCESSOR MATCHES "^(ARM64|arm64|aarch64)$")
++        set(_wx_clang_msvc_lib_dir "vc_arm64_lib")
++    else()
++        set(_wx_clang_msvc_lib_dir "vc_x64_lib")
++    endif()
++    include("${CMAKE_CURRENT_LIST_DIR}${wxPLATFORM_LIB_DIR}/${_wx_clang_msvc_lib_dir}/@PROJECT_NAME@Targets.cmake")
++else()
++    include("${CMAKE_CURRENT_LIST_DIR}${wxPLATFORM_LIB_DIR}/@PROJECT_NAME@Targets.cmake")
++endif()
+ 
+ macro(wx_inherit_property source dest name)
+     # property name without _<CONFIG>
+--
+2.43.0

deps/wxWidgets/wxWidgets.cmake

@@ -28,6 +28,7 @@ orcaslicer_add_cmake_project(
     GIT_SHALLOW ON
     GIT_SUBMODULES 3rdparty/catch 3rdparty/pcre 3rdparty/libwebp
     DEPENDS ${PNG_PKG} ${ZLIB_PKG} ${EXPAT_PKG} ${JPEG_PKG}
+    PATCH_COMMAND git apply --verbose --ignore-space-change --whitespace=fix ${CMAKE_CURRENT_LIST_DIR}/0001-Clang-CL-fix.patch
     CMAKE_ARGS
         -DwxBUILD_PRECOMP=ON
         ${_wx_toolkit}

deps_src/clipper2/CMakeLists.txt

@@ -37,7 +37,11 @@ target_include_directories(Clipper2
 )
 
 if (WIN32)
-  target_compile_options(Clipper2 PRIVATE /W4 /WX)
+  if (MSVC AND NOT CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
+    target_compile_options(Clipper2 PRIVATE /W4 /WX)
+  elseif (CMAKE_CXX_COMPILER_ID STREQUAL "Clang" AND CMAKE_CXX_COMPILER_FRONTEND_VARIANT STREQUAL "MSVC")
+    target_compile_options(Clipper2 PRIVATE /W4)
+  endif()
 else()
   target_compile_options(Clipper2 PRIVATE -Wall -Wextra -Wpedantic -Werror)
   target_link_libraries(Clipper2 PUBLIC -lm)

deps_src/imgui/imgui_draw.cpp

@@ -2856,6 +2856,7 @@ const ImWchar*   ImFontAtlas::GetGlyphRangesDefault()
     {
         0x0020, 0x00FF, // Basic Latin + Latin Supplement
         0x2000, 0x206F, // General Punctuation
+        0x2103, 0x2103, // ℃ Celsius symbol
         0x3000, 0x30FF, // CJK Symbols and Punctuations, Hiragana, Katakana
         0x31F0, 0x31FF, // Katakana Phonetic Extensions
         0xFF00, 0xFFEF, // Half-width characters

deps_src/imgui/imstb_textedit.h

@@ -465,6 +465,57 @@ static void stb_textedit_click(STB_TEXTEDIT_STRING *str, STB_TexteditState *stat
       STB_TEXTEDIT_LAYOUTROW(&r, str, 0);
       y = r.ymin;
    }
+   else
+   {
+      // In multi-line mode, clamp y to stay within the text vertical bounds.
+      // This lets the click still land at a valid location if the mouse is slightly
+      // above or below the text.
+      StbTexteditRow r;
+      int n = STB_TEXTEDIT_STRINGLEN(str);
+      int i = 0;
+      float base_y = 0, y_min, y_max;
+
+      // Get the first row to establish y_min and start the iteration
+      STB_TEXTEDIT_LAYOUTROW(&r, str, 0);
+      if (r.num_chars <= 0)
+      {
+         state->cursor = 0;
+         state->select_start = state->cursor;
+         state->select_end = state->cursor;
+         state->has_preferred_x = 0;
+         return;
+      }
+      y_min = r.ymin;
+      y_max = base_y + r.ymax;
+      i = r.num_chars;
+      base_y += r.baseline_y_delta;
+
+      // Walk the remaining rows to find the bottom of the last row
+      while (i < n)
+      {
+         STB_TEXTEDIT_LAYOUTROW(&r, str, i);
+         if (r.num_chars <= 0)
+            break;
+         y_max = base_y + r.ymax;
+         i += r.num_chars;
+         base_y += r.baseline_y_delta;
+      }
+
+      // If the text ends with a newline, account for the empty trailing line
+      // so the cursor can be placed on it
+      if (n > 0 && STB_TEXTEDIT_GETCHAR(str, n - 1) == STB_TEXTEDIT_NEWLINE)
+      {
+         STB_TEXTEDIT_LAYOUTROW(&r, str, n);
+         y_max = base_y + r.ymax;
+      }
+
+      // Subtract half the last line height to avoid rounding issues when the mouse
+      // is just barely below the last line (keep cursor on the last line, not after the text)
+      y_max -= (r.ymax - r.ymin) * 0.5f;
+
+      if (y < y_min) y = y_min;
+      if (y > y_max) y = y_max;
+   }
 
    state->cursor = stb_text_locate_coord(str, x, y);
    state->select_start = state->cursor;
@@ -485,6 +536,50 @@ static void stb_textedit_drag(STB_TEXTEDIT_STRING *str, STB_TexteditState *state
       STB_TEXTEDIT_LAYOUTROW(&r, str, 0);
       y = r.ymin;
    }
+   else
+   {
+      // In multi-line mode, clamp y to stay within the text vertical bounds.
+      // This lets the drag keep working if the mouse goes off the top or bottom of the text.
+      StbTexteditRow r;
+      int n = STB_TEXTEDIT_STRINGLEN(str);
+      int i = 0;
+      float base_y = 0, y_min, y_max;
+
+      // Get the first row to establish y_min and start the iteration
+      STB_TEXTEDIT_LAYOUTROW(&r, str, 0);
+      if (r.num_chars <= 0)
+         return;
+      y_min = r.ymin;
+      y_max = base_y + r.ymax;
+      i = r.num_chars;
+      base_y += r.baseline_y_delta;
+
+      // Walk the remaining rows to find the bottom of the last row
+      while (i < n)
+      {
+         STB_TEXTEDIT_LAYOUTROW(&r, str, i);
+         if (r.num_chars <= 0)
+            break;
+         y_max = base_y + r.ymax;
+         i += r.num_chars;
+         base_y += r.baseline_y_delta;
+      }
+
+      // If the text ends with a newline, account for the empty trailing line
+      // so the cursor can be placed on it
+      if (n > 0 && STB_TEXTEDIT_GETCHAR(str, n - 1) == STB_TEXTEDIT_NEWLINE)
+      {
+         STB_TEXTEDIT_LAYOUTROW(&r, str, n);
+         y_max = base_y + r.ymax;
+      }
+
+      // Subtract half the last line height to avoid rounding issues when the mouse
+      // is just barely below the last line (keep cursor on the last line, not after the text)
+      y_max -= (r.ymax - r.ymin) * 0.5f;
+
+      if (y < y_min) y = y_min;
+      if (y > y_max) y = y_max;
+   }
 
    if (state->select_start == state->select_end)
       state->select_start = state->cursor;

deps_src/miniz/CMakeLists.txt

@@ -11,6 +11,8 @@ add_library(miniz_static STATIC
 
 if(${CMAKE_C_COMPILER_ID} STREQUAL "GNU")
     target_compile_definitions(miniz_static PRIVATE _GNU_SOURCE)
+elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang" AND CMAKE_C_COMPILER_FRONTEND_VARIANT STREQUAL "MSVC")
+    target_compile_options(miniz_static PRIVATE /clang:-Wno-error=incompatible-pointer-types)
 endif()
 
 target_link_libraries(miniz INTERFACE miniz_static)

localization/i18n/OrcaSlicer.pot

@@ -7781,19 +7781,19 @@ msgid "Replaced with 3D files from directory:\n"
 msgstr ""
 
 #, possible-boost-format
-msgid "✖ Skipped %1%: same file.\n"
+msgid "✖ Skipped %s: same file.\n"
 msgstr ""
 
 #, possible-boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
+msgid "✖ Skipped %s: file does not exist.\n"
 msgstr ""
 
 #, possible-boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
+msgid "✖ Skipped %s: failed to replace.\n"
 msgstr ""
 
 #, possible-boost-format
-msgid "✔ Replaced %1%.\n"
+msgid "✔ Replaced %s.\n"
 msgstr ""
 
 msgid "Replaced volumes"

localization/i18n/ca/OrcaSlicer_ca.po

@@ -8361,21 +8361,21 @@ msgstr "No s'ha seleccionat el directori per a la substitució"
 msgid "Replaced with 3D files from directory:\n"
 msgstr "Substituït amb fitxers 3D del directori:\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
-msgstr "✖ Omès %1%: mateix fitxer.\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
+msgstr "✖ Omès %s: mateix fitxer.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
-msgstr "✖ Omès %1%: el fitxer no existeix.\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
+msgstr "✖ Omès %s: el fitxer no existeix.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
-msgstr "✖ Omès %1%: la substitució ha fallat.\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
+msgstr "✖ Omès %s: la substitució ha fallat.\n"
 
-#, boost-format
-msgid "✔ Replaced %1%.\n"
-msgstr "✔ Substituït %1%.\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
+msgstr "✔ Substituït %s.\n"
 
 msgid "Replaced volumes"
 msgstr "Volums substituïts"

localization/i18n/cs/OrcaSlicer_cs.po

@@ -8320,21 +8320,21 @@ msgstr "Nebyla vybrána složka pro nahrazení"
 msgid "Replaced with 3D files from directory:\n"
 msgstr "Nahrazeno 3D soubory ze složky:\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
-msgstr "✖ Přeskočeno %1%: stejný soubor.\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
+msgstr "✖ Přeskočeno %s: stejný soubor.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
-msgstr "✖ Přeskočeno %1%: soubor neexistuje.\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
+msgstr "✖ Přeskočeno %s: soubor neexistuje.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
-msgstr "✖ Přeskočeno %1%: nahrazení se nezdařilo.\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
+msgstr "✖ Přeskočeno %s: nahrazení se nezdařilo.\n"
 
-#, boost-format
-msgid "✔ Replaced %1%.\n"
-msgstr "✔ Nahrazeno %1%.\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
+msgstr "✔ Nahrazeno %s.\n"
 
 msgid "Replaced volumes"
 msgstr "Nahrazené objemy"

localization/i18n/de/OrcaSlicer_de.po

@@ -8191,21 +8191,21 @@ msgstr "Verzeichnis um daraus zu ersetzen wurde nicht ausgewählt"
 msgid "Replaced with 3D files from directory:\n"
 msgstr "Ersetzt durch 3D-Dateien aus Verzeichnis:\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
-msgstr "✖ Übersprungen %1%: gleiche Datei.\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
+msgstr "✖ Übersprungen %s: gleiche Datei.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
-msgstr "✖ Übersprungen %1%: Datei existiert nicht.\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
+msgstr "✖ Übersprungen %s: Datei existiert nicht.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
-msgstr "✖ Übersprungen %1%: Ersetzen fehlgeschlagen.\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
+msgstr "✖ Übersprungen %s: Ersetzen fehlgeschlagen.\n"
 
-#, boost-format
-msgid "✔ Replaced %1%.\n"
-msgstr "✔ Ersetzt %1%.\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
+msgstr "✔ Ersetzt %s.\n"
 
 msgid "Replaced volumes"
 msgstr "Ersetzte Volumen"

localization/i18n/en/OrcaSlicer_en.po

@@ -7776,20 +7776,20 @@ msgstr ""
 msgid "Replaced with 3D files from directory:\n"
 msgstr ""
 
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
 msgstr ""
 
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
 msgstr ""
 
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
 msgstr ""
 
-#, boost-format
-msgid "✔ Replaced %1%.\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
 msgstr ""
 
 msgid "Replaced volumes"

localization/i18n/es/OrcaSlicer_es.po

@@ -7997,21 +7997,21 @@ msgstr "No se seleccionó el directorio para el reemplazo"
 msgid "Replaced with 3D files from directory:\n"
 msgstr "Reemplazado con archivos 3D desde el directorio:\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
-msgstr "✖ Omitido %1%: mismo archivo.\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
+msgstr "✖ Omitido %s: mismo archivo.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
-msgstr "✖ Omitido %1%: el archivo no existe.\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
+msgstr "✖ Omitido %s: el archivo no existe.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
-msgstr "✖ Omitido %1%: fallo al reemplazar.\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
+msgstr "✖ Omitido %s: fallo al reemplazar.\n"
 
-#, boost-format
-msgid "✔ Replaced %1%.\n"
-msgstr "✔ Reemplazado %1%.\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
+msgstr "✔ Reemplazado %s.\n"
 
 msgid "Replaced volumes"
 msgstr "Volúmenes reemplazados"

localization/i18n/eu/OrcaSlicer_eu.po

@@ -8064,21 +8064,21 @@ msgstr "Ez da ordezkatzeko direktoriorik hautatu"
 msgid "Replaced with 3D files from directory:\n"
 msgstr "Direktorio honetako 3D fitxategiekin ordeztuta:\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
-msgstr "✖ %1% saltatu da: fitxategi bera.\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
+msgstr "✖ %s saltatu da: fitxategi bera.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
-msgstr "✖ %1% saltatu da: fitxategia ez da existitzen.\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
+msgstr "✖ %s saltatu da: fitxategia ez da existitzen.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
-msgstr "✖ %1% saltatu da: ezin izan da ordeztu.\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
+msgstr "✖ %s saltatu da: ezin izan da ordeztu.\n"
 
-#, boost-format
-msgid "✔ Replaced %1%.\n"
-msgstr "✔ %1% ordezkatu da.\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
+msgstr "✔ %s ordezkatu da.\n"
 
 msgid "Replaced volumes"
 msgstr "Ordeztutako bolumenak"
@@ -12013,11 +12013,11 @@ msgstr "Purgatze-dorreak euskarriak objektuaren geruza-altuera bera izatea eskat
 
 # AI Translated
 msgid "For Organic supports, two walls are supported only with the Hollow/Default base pattern."
-msgstr "Euskarri organikoetan, bi horma Hollow/Default oinarri-patroiarekin soilik onartzen dira."
+msgstr "Euskarri organikoetan, bi horma Hutsa/Lehenetsia oinarri-patroiarekin soilik onartzen dira."
 
 # AI Translated
 msgid "The Lightning base pattern is not supported by this support type; Rectilinear will be used instead."
-msgstr "Lightning oinarri-patroia ez du euskarri mota honek onartzen; Rectilinear erabiliko da horren ordez."
+msgstr "Tximista oinarri-patroia ez du euskarri mota honek onartzen; Lerrozuzena erabiliko da horren ordez."
 
 msgid "Organic support tree tip diameter must not be smaller than support material extrusion width."
 msgstr "Euskarri organikoaren zuhaitz-muturraren diametroak ezin du izan euskarri-materialaren estrusio-zabalera baino txikiagoa."
@@ -12030,7 +12030,7 @@ msgstr "Euskarri organikoaren adar-diametroak ezin du izan euskarri-zuhaitzaren
 
 # AI Translated
 msgid "The Hollow base pattern is not supported by this support type; Rectilinear will be used instead."
-msgstr "Hollow oinarri-patroia ez du euskarri mota honek onartzen; Rectilinear erabiliko da horren ordez."
+msgstr "Hutsa oinarri-patroia ez du euskarri mota honek onartzen; Lerrozuzena erabiliko da horren ordez."
 
 msgid "Support enforcers are used but support is not enabled. Please enable support."
 msgstr "Euskarri-behartzaileak erabiltzen dira, baina euskarria ez dago gaituta. Gaitu euskarriak."
@@ -13252,7 +13252,7 @@ msgstr "Moderatua"
 
 # AI Translated
 msgid "Top surface pattern"
-msgstr "Goiko gainazalaren patroia"
+msgstr "Goiko gainazaleko patroia"
 
 # AI Translated
 msgid "This is the line pattern for top surface infill."
@@ -13265,13 +13265,13 @@ msgid "Monotonic line"
 msgstr "Lerro monotonikoa"
 
 msgid "Rectilinear"
-msgstr "Rectilinear"
+msgstr "Lerrozuzena"
 
 msgid "Aligned Rectilinear"
 msgstr "Lerrozuzen lerrokatua"
 
 msgid "Concentric"
-msgstr "Concentric"
+msgstr "Kontzentrikoa"
 
 msgid "Hilbert Curve"
 msgstr "Hilbert kurba"
@@ -13337,7 +13337,7 @@ msgstr "Kanporantz"
 
 # AI Translated
 msgid "Bottom surface pattern"
-msgstr "Beheko gainazalaren patroia"
+msgstr "Beheko gainazaleko patroia"
 
 # AI Translated
 msgid "This is the line pattern of bottom surface infill, not including bridge infill."
@@ -13362,7 +13362,7 @@ msgid ""
 "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Gaineko gainazalak betetzen diren noranzkoa zentroan oinarritutako patroia erabiltzen denean (Konzentrikoa, Arkimedeen Akordeak, Oktograma Espirala).\n"
+"Goiko gainazalak betetzen diren noranzkoa zentroan oinarritutako patroia erabiltzen denean (Kontzentrikoa, Arkimedesen kordak, Oktagrama-kiribila).\n"
 "Kanporanzkoa erdialdean hasten da, beraz, gehiegizko materiala gutxien ikusten den ertzera bultzatzen da. Barruranzkoa ertzean hasten da eta erdian kurba estuekin amaitzen da.\n"
 "Lehenetsiak bide laburreneko ordena erabiltzen du, zeina norabide batean zein bestean ibil daitekeen."
 
@@ -13375,7 +13375,7 @@ msgid ""
 "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n"
 "Default uses shortest-path ordering, which may run in either direction."
 msgstr ""
-"Beheko gainazalak betetzen diren noranzkoa zentroan oinarritutako patroia erabiltzen denean (Konzentrikoa, Arkimedeen Akordeak, Oktograma Espirala).\n"
+"Beheko gainazalak betetzen diren noranzkoa zentroan oinarritutako patroia erabiltzen denean (Kontzentrikoa, Arkimedesen kordak, Oktagrama-kiribila).\n"
 "Barruranzkoa hasten da gainazal bakoitza kanpoko kurba zabalagoekin, eta horrek lehen geruzaren atxikimendua hobetzen du erdiko kurba estuak itsatsi ez daitezkeen inprimatze-plaketan. Kanporanzkoa erdialdean hasten da, gehiegizko materiala ertzera bultzatuz.\n"
 "Lehenetsiak bide laburreneko ordena erabiltzen du, zeina norabide batean zein bestean ibil daitekeen."
 
@@ -16431,9 +16431,9 @@ msgid ""
 msgstr ""
 "Euskarriaren lerro-patroia.\n"
 "\n"
-"Zuhaitz-euskarrien aukera lehenetsia Hutsa da, hau da, ez dago oinarri-patroirik. Beste euskarri motetarako, aukera lehenetsia patroi zuzenekoa da.\n"
+"Zuhaitz-euskarrien aukera lehenetsia Hutsa da, hau da, ez dago oinarri-patroirik. Beste euskarri motetarako, aukera lehenetsia patroi lerrozuzena da.\n"
 "\n"
-"OHARRA: Euskarri organikoetan, bi hormak Hutsa/Lehenetsia oinarri-patroiarekin bakarrik onartzen dira. Tximistetan oinarritutako patroia Zuhaitz mehea/Indartsua/Hibridoa euskarriek bakarrik onartzen dute. Beste euskarri motetarako, Zuzenekoa erabiliko da Tximistenaren ordez."
+"OHARRA: Euskarri organikoetan, bi hormak Hutsa/Lehenetsia oinarri-patroiarekin bakarrik onartzen dira. Tximista oinarri-patroia Zuhaitz mehea/Indartsua/Hibridoa euskarriek bakarrik onartzen dute. Beste euskarri motetarako, Lerrozuzena erabiliko da Tximistaren ordez."
 
 msgid "Rectilinear grid"
 msgstr "Sare lerrozuzena"
@@ -16713,7 +16713,7 @@ msgid ""
 " - Each Model: centers the pattern on each connected body. Parts that touch or overlap share one center; parts detached from the rest each get their own.\n"
 " - Each Assembly: uses a single shared center for the whole object or assembly."
 msgstr ""
-"Goiko eta beheko gainazaleko patroi zentratuen (Arkimedesen kordak, Oktagrama-espirala) zentroa non kokatzen den aukeratzen du.\n"
+"Goiko eta beheko gainazaleko patroi zentratuen (Arkimedesen kordak, Oktagrama-kiribila) zentroa non kokatzen den aukeratzen du.\n"
 " - Gainazal bakoitza: patroia gainazal-eskualde bakoitzean zentratzen du, uharte bakoitza bere kabuz simetrikoa izan dadin.\n"
 " - Modelo bakoitza: patroia konektatutako gorputz bakoitzean zentratzen du. Elkar ukitzen edo gainjartzen diren piezek zentro bera partekatzen dute; gainerakoetatik bereizitako piezek beren zentroa dute.\n"
 " - Muntaketa bakoitza: zentro partekatu bakarra erabiltzen du objektu edo muntaketa osorako."
@@ -17144,7 +17144,7 @@ msgid "Detect narrow internal solid infills"
 msgstr "Detektatu barruko betegarri solido estua"
 
 msgid "This option will auto-detect narrow internal solid infill areas. If enabled, the concentric pattern will be used for the area to speed up printing. Otherwise, the rectilinear pattern will be used by default."
-msgstr "Aukera honek barruko betegarri solido estuko eremuak automatikoki detektatuko ditu. Gaituta badago, eremu horretan patroi zentrokidea erabiliko da inprimaketa azkartzeko. Bestela, patroi lerrozuzena erabiliko da lehenespenez."
+msgstr "Aukera honek barruko betegarri solido estuko eremuak automatikoki detektatuko ditu. Gaituta badago, eremu horretan patroi kontzentrikoa erabiliko da inprimaketa azkartzeko. Bestela, patroi lerrozuzena erabiliko da lehenespenez."
 
 msgid "invalid value "
 msgstr "balio baliogabea "
@@ -18703,7 +18703,7 @@ msgstr "YOLO (perfekzionista)"
 
 # AI Translated
 msgid "Top Surface Pattern"
-msgstr "Goiko gainazalaren patroia"
+msgstr "Goiko gainazaleko patroia"
 
 msgid "Choose a slot for the selected color"
 msgstr "Aukeratu zirrikitu bat hautatutako kolorearentzat"

localization/i18n/fr/OrcaSlicer_fr.po

@@ -8120,21 +8120,21 @@ msgstr "Le répertoire pour le remplacement n'a pas été sélectionné"
 msgid "Replaced with 3D files from directory:\n"
 msgstr "Remplacé par des fichiers 3D depuis le répertoire :\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
-msgstr "✖ Ignoré %1% : même fichier.\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
+msgstr "✖ Ignoré %s : même fichier.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
-msgstr "✖ Ignoré %1% : le fichier n'existe pas.\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
+msgstr "✖ Ignoré %s : le fichier n'existe pas.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
-msgstr "✖ Ignoré %1% : échec du remplacement.\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
+msgstr "✖ Ignoré %s : échec du remplacement.\n"
 
-#, boost-format
-msgid "✔ Replaced %1%.\n"
-msgstr "✔ Remplacé %1%.\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
+msgstr "✔ Remplacé %s.\n"
 
 msgid "Replaced volumes"
 msgstr "Volumes remplacés"
@@ -9283,22 +9283,22 @@ msgid "DEV host: api-dev.bambu-lab.com/v1"
 msgstr "Hôte DEV : api-dev.bambu-lab.com/v1"
 
 msgid "QA  host: api-qa.bambu-lab.com/v1"
-msgstr "Hôte AQ : api-qa.bambu-lab.com/v1"
+msgstr "Hôte QA : api-qa.bambu-lab.com/v1"
 
 msgid "PRE host: api-pre.bambu-lab.com/v1"
-msgstr "Hébergeur PRE : api-pre.bambu-lab.com/v1"
+msgstr "Hôte PRE : api-pre.bambu-lab.com/v1"
 
 msgid "Product host"
 msgstr "Hôte du produit"
 
 msgid "Debug save button"
-msgstr "bouton d'enregistrement de débogage"
+msgstr "Bouton d'enregistrement de debugage"
 
 msgid "Save debug settings"
-msgstr "enregistrer les paramètres de débogage"
+msgstr "Enregistrer les paramètres de debugage"
 
 msgid "Debug settings have been saved successfully!"
-msgstr "Les paramètres DEBUG ont été enregistrés avec succès !"
+msgstr "Les paramètres de debug ont été enregistrés avec succès !"
 
 msgid "Cloud environment switched; please login again!"
 msgstr "L'environnement Cloud a changé, veuillez vous reconnecter !"

localization/i18n/hu/OrcaSlicer_hu.po

@@ -8244,21 +8244,21 @@ msgstr "A cseréhez nem lett mappa kiválasztva"
 msgid "Replaced with 3D files from directory:\n"
 msgstr "Cserélve a mappából származó 3D fájlokra:\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
-msgstr "✖ Kihagyva %1%: azonos fájl.\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
+msgstr "✖ %s kihagyva: azonos fájl.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
-msgstr "✖ Kihagyva %1%: a fájl nem létezik.\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
+msgstr "✖ %s kihagyva: a fájl nem létezik.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
-msgstr "✖ Kihagyva %1%: a csere sikertelen.\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
+msgstr "✖ %s kihagyva: a csere sikertelen.\n"
 
-#, boost-format
-msgid "✔ Replaced %1%.\n"
-msgstr "✔ Lecserélve: %1%.\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
+msgstr "✔%s lecserélve.\n"
 
 msgid "Replaced volumes"
 msgstr "Lecserélt térfogatok"

localization/i18n/it/OrcaSlicer_it.po

@@ -8244,21 +8244,21 @@ msgstr "La directory per la sostituzione non è stata selezionata"
 msgid "Replaced with 3D files from directory:\n"
 msgstr "Sostituito con file 3D dalla directory:\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
-msgstr "✖ Saltato %1%: stesso file.\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
+msgstr "✖ Saltato %s: stesso file.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
-msgstr "✖ Saltato %1%: il file non esiste.\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
+msgstr "✖ Saltato %s: il file non esiste.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
-msgstr "✖ Saltato %1%: sostituzione fallita.\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
+msgstr "✖ Saltato %s: sostituzione fallita.\n"
 
-#, boost-format
-msgid "✔ Replaced %1%.\n"
-msgstr "✔ Sostituito %1%.\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
+msgstr "✔ Sostituito %s.\n"
 
 msgid "Replaced volumes"
 msgstr "Volumi sostituiti"

localization/i18n/ja/OrcaSlicer_ja.po

@@ -8262,21 +8262,21 @@ msgstr "置換用のディレクトリが選択されていません"
 msgid "Replaced with 3D files from directory:\n"
 msgstr "ディレクトリの3Dファイルで置換しました:\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
-msgstr "✖ スキップ %1%: 同一ファイル。\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
+msgstr "✖ スキップ %s: 同一ファイル。\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
-msgstr "✖ スキップ %1%: ファイルが存在しません。\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
+msgstr "✖ スキップ %s: ファイルが存在しません。\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
-msgstr "✖ スキップ %1%: 置換に失敗しました。\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
+msgstr "✖ スキップ %s: 置換に失敗しました。\n"
 
-#, boost-format
-msgid "✔ Replaced %1%.\n"
-msgstr "✔ 置換しました %1%。\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
+msgstr "✔ 置換しました %s。\n"
 
 msgid "Replaced volumes"
 msgstr "置換されたボリューム"

localization/i18n/ko/OrcaSlicer_ko.po

@@ -8288,24 +8288,24 @@ msgid "Replaced with 3D files from directory:\n"
 msgstr "다음 디렉터리의 3D 파일로 교체했습니다:\n"
 
 # AI Translated
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
-msgstr "✖ 건너뜀 %1%: 동일한 파일입니다.\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
+msgstr "✖ 건너뜀 %s: 동일한 파일입니다.\n"
 
 # AI Translated
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
-msgstr "✖ 건너뜀 %1%: 파일이 존재하지 않습니다.\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
+msgstr "✖ 건너뜀 %s: 파일이 존재하지 않습니다.\n"
 
 # AI Translated
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
-msgstr "✖ 건너뜀 %1%: 교체하지 못했습니다.\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
+msgstr "✖ 건너뜀 %s: 교체하지 못했습니다.\n"
 
 # AI Translated
-#, boost-format
-msgid "✔ Replaced %1%.\n"
-msgstr "✔ %1%을(를) 교체했습니다.\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
+msgstr "✔ %s을(를) 교체했습니다.\n"
 
 # AI Translated
 msgid "Replaced volumes"

localization/i18n/lt/OrcaSlicer_lt.po

@@ -8239,21 +8239,21 @@ msgstr ""
 "Pakeista 3D failais iš katalogo:\n"
 "\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
-msgstr "✖ Praleistas %1%: tas pats failas.\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
+msgstr "✖ Praleistas %s: tas pats failas.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
-msgstr "✖ Praleistas %1%: failas neegzistuoja.\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
+msgstr "✖ Praleistas %s: failas neegzistuoja.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
-msgstr "✖ Praleistas %1%: nepavyko pakeisti.\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
+msgstr "✖ Praleistas %s: nepavyko pakeisti.\n"
 
-#, boost-format
-msgid "✔ Replaced %1%.\n"
-msgstr "✔ Pakeistas %1%.\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
+msgstr "✔ Pakeistas %s.\n"
 
 msgid "Replaced volumes"
 msgstr "Pakeisti tūriai"

localization/i18n/nl/OrcaSlicer_nl.po

@@ -8999,24 +8999,24 @@ msgid "Replaced with 3D files from directory:\n"
 msgstr "Vervangen door 3D-bestanden uit de map:\n"
 
 # AI Translated
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
-msgstr "✖ Overgeslagen %1%: hetzelfde bestand.\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
+msgstr "✖ Overgeslagen %s: hetzelfde bestand.\n"
 
 # AI Translated
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
-msgstr "✖ Overgeslagen %1%: bestand bestaat niet.\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
+msgstr "✖ Overgeslagen %s: bestand bestaat niet.\n"
 
 # AI Translated
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
-msgstr "✖ Overgeslagen %1%: vervangen is mislukt.\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
+msgstr "✖ Overgeslagen %s: vervangen is mislukt.\n"
 
 # AI Translated
-#, boost-format
-msgid "✔ Replaced %1%.\n"
-msgstr "✔ Vervangen %1%.\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
+msgstr "✔ Vervangen %s.\n"
 
 # AI Translated
 msgid "Replaced volumes"

localization/i18n/pl/OrcaSlicer_pl.po

@@ -8444,24 +8444,24 @@ msgid "Replaced with 3D files from directory:\n"
 msgstr "Zastąpiono plikami 3D z katalogu:\n"
 
 # AI Translated
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
-msgstr "✖ Pominięto %1%: ten sam plik.\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
+msgstr "✖ Pominięto %s: ten sam plik.\n"
 
 # AI Translated
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
-msgstr "✖ Pominięto %1%: plik nie istnieje.\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
+msgstr "✖ Pominięto %s: plik nie istnieje.\n"
 
 # AI Translated
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
-msgstr "✖ Pominięto %1%: nie udało się zastąpić.\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
+msgstr "✖ Pominięto %s: nie udało się zastąpić.\n"
 
 # AI Translated
-#, boost-format
-msgid "✔ Replaced %1%.\n"
-msgstr "✔ Zastąpiono %1%.\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
+msgstr "✔ Zastąpiono %s.\n"
 
 # AI Translated
 msgid "Replaced volumes"

localization/i18n/sv/OrcaSlicer_sv.po

@@ -9088,24 +9088,24 @@ msgid "Replaced with 3D files from directory:\n"
 msgstr "Ersatt med 3D-filer från mappen:\n"
 
 # AI Translated
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
-msgstr "✖ Hoppade över %1%: samma fil.\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
+msgstr "✖ Hoppade över %s: samma fil.\n"
 
 # AI Translated
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
-msgstr "✖ Hoppade över %1%: filen finns inte.\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
+msgstr "✖ Hoppade över %s: filen finns inte.\n"
 
 # AI Translated
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
-msgstr "✖ Hoppade över %1%: det gick inte att ersätta.\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
+msgstr "✖ Hoppade över %s: det gick inte att ersätta.\n"
 
 # AI Translated
-#, boost-format
-msgid "✔ Replaced %1%.\n"
-msgstr "✔ Ersatte %1%.\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
+msgstr "✔ Ersatte %s.\n"
 
 # AI Translated
 msgid "Replaced volumes"

localization/i18n/uk/OrcaSlicer_uk.po

@@ -8306,21 +8306,21 @@ msgstr "Каталог для заміни не вибрано"
 msgid "Replaced with 3D files from directory:\n"
 msgstr "Замінено 3D-файлами з каталогу:\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
-msgstr "✖ Пропущено %1%: той самий файл.\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
+msgstr "✖ Пропущено %s: той самий файл.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
-msgstr "✖ Пропущено %1%: файл не існує.\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
+msgstr "✖ Пропущено %s: файл не існує.\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
-msgstr "✖ Пропущено %1%: не вдалося замінити.\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
+msgstr "✖ Пропущено %s: не вдалося замінити.\n"
 
-#, boost-format
-msgid "✔ Replaced %1%.\n"
-msgstr "✔ Замінено %1%.\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
+msgstr "✔ Замінено %s.\n"
 
 msgid "Replaced volumes"
 msgstr "Замінені обʼєми"

localization/i18n/vi/OrcaSlicer_vi.po

@@ -8721,24 +8721,24 @@ msgid "Replaced with 3D files from directory:\n"
 msgstr "Đã thay thế bằng file 3D từ thư mục:\n"
 
 # AI Translated
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
-msgstr "✖ Đã bỏ qua %1%: cùng một file.\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
+msgstr "✖ Đã bỏ qua %s: cùng một file.\n"
 
 # AI Translated
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
-msgstr "✖ Đã bỏ qua %1%: file không tồn tại.\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
+msgstr "✖ Đã bỏ qua %s: file không tồn tại.\n"
 
 # AI Translated
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
-msgstr "✖ Đã bỏ qua %1%: thay thế thất bại.\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
+msgstr "✖ Đã bỏ qua %s: thay thế thất bại.\n"
 
 # AI Translated
-#, boost-format
-msgid "✔ Replaced %1%.\n"
-msgstr "✔ Đã thay thế %1%.\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
+msgstr "✔ Đã thay thế %s.\n"
 
 # AI Translated
 msgid "Replaced volumes"

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -8028,21 +8028,21 @@ msgstr "未选择替换目录"
 msgid "Replaced with 3D files from directory:\n"
 msgstr "替换为目录中的 3D 文件：\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
-msgstr "✖ 跳过 %1%：同一文件。\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
+msgstr "✖ 跳过 %s：同一文件。\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
-msgstr "✖ 跳过%1%：文件不存在。\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
+msgstr "✖ 跳过%s：文件不存在。\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
-msgstr "✖ 跳过%1%：替换失败。\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
+msgstr "✖ 跳过%s：替换失败。\n"
 
-#, boost-format
-msgid "✔ Replaced %1%.\n"
-msgstr "✔ 替换了 %1%。\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
+msgstr "✔ 替换了 %s。\n"
 
 msgid "Replaced volumes"
 msgstr "替换的卷"

localization/i18n/zh_TW/OrcaSlicer_zh_TW.po

@@ -8193,21 +8193,21 @@ msgstr "未選擇替換的目錄"
 msgid "Replaced with 3D files from directory:\n"
 msgstr "已從目錄替換為 3D 檔案：\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: same file.\n"
-msgstr "✖ 已跳過 %1%：相同檔案。\n"
+#, c-format
+msgid "✖ Skipped %s: same file.\n"
+msgstr "✖ 已跳過 %s：相同檔案。\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: file does not exist.\n"
-msgstr "✖ 已跳過 %1%：檔案不存在。\n"
+#, c-format
+msgid "✖ Skipped %s: file does not exist.\n"
+msgstr "✖ 已跳過 %s：檔案不存在。\n"
 
-#, boost-format
-msgid "✖ Skipped %1%: failed to replace.\n"
-msgstr "✖ 已跳過 %1%：無法替換。\n"
+#, c-format
+msgid "✖ Skipped %s: failed to replace.\n"
+msgstr "✖ 已跳過 %s：無法替換。\n"
 
-#, boost-format
-msgid "✔ Replaced %1%.\n"
-msgstr "✔ 已替換 %1%。\n"
+#, c-format
+msgid "✔ Replaced %s.\n"
+msgstr "✔ 已替換 %s。\n"
 
 msgid "Replaced volumes"
 msgstr "已替換體積"

resources/calib/temperature_tower/gen_belt_temp_tower.py

@@ -1,79 +0,0 @@
-#!/usr/bin/env python3
-"""Belt temperature-tower asset generator (discrete-provini design).
-
-A vertical temperature tower cannot be sliced on a belt printer, so lay a row of
-DISCRETE provini (one per temperature) along the belt (designed Y) with a fixed
-surface gap. Each provino is the chevron+arc unit (belt_temp_provino_unit.stl,
-keel-first); its temperature is ENGRAVED upright into the 50 mm face — a raised
-number would be an unsupported overhang on the belt. The C++ calib_temp belt branch
-(Plater.cpp) injects one M104 per zone 70 layers INTO provino i:
-  print_z[i] = i * PITCH * cos(theta) + 70 * layer_height   (theta = 45)
-inside the body, not in the empty inter-provino gap (which has no sliced layers for
-the event to attach to). PITCH below is the shared geometry contract with that code —
-keep them in sync.
-
-Generates one STL per filament temp range used by Temp_Calibration_Dlg.
-"""
-import numpy as np, trimesh, os
-from matplotlib.textpath import TextPath
-from matplotlib.font_manager import FontProperties
-from shapely.geometry import Polygon as ShPoly
-from shapely.ops import unary_union
-
-HERE = os.path.dirname(os.path.abspath(__file__))
-UNIT = os.path.join(HERE, 'belt_temp_provino_unit.stl')   # single provino, keel-first
-SURF_GAP = 25.0            # surface-to-surface gap between provini (mm) — user spec
-TEXT_H = 9.0
-TEXT_DEPTH = 0.8           # engraving depth (numbers are CUT into the face, not raised:
-                          # a raised number is an unsupported Y-overhang on the belt)
-TEXT_OVERSHOOT = 0.6       # extra height poking out of the face for a clean boolean cut
-
-# Temperature ranges (start, end) per filament family, 5 C step. File name encodes them.
-RANGES = [(230,190),(270,230),(250,230),(280,240),(240,210),(320,280)]
-
-unit = trimesh.load(UNIT)
-dY = unit.bounds[1,1] - unit.bounds[0,1]
-PITCH = dY + SURF_GAP                       # designed-Y pitch == C++ contract constant
-print(f"unit dY={dY:.2f}  PITCH={PITCH:.3f}  (C++ contract: print_z[i]=i*{PITCH:.3f}*cos45)")
-
-# 50 mm face normal (0,-1,1)/sqrt2 ; UPRIGHT basis u=+X det(+1) (verified non-mirrored)
-n = np.array([0,-1,1.])/np.sqrt(2)
-u = np.array([1,0,0.]); v = np.array([0,1,1.])/np.sqrt(2)
-R = np.column_stack([u,v,n])
-fn = unit.face_normals; fc = unit.triangles_center; fa = unit.area_faces
-sel = (fn@n) > 0.9
-face_c = (fc[sel]*fa[sel,None]).sum(0)/fa[sel].sum()
-
-def text_mesh(s):
-    tp = TextPath((0,0), s, size=TEXT_H, prop=FontProperties(family='DejaVu Sans'))
-    rings = [ShPoly(p) for p in tp.to_polygons() if len(p)>=3]
-    rings.sort(key=lambda r:r.area, reverse=True)
-    used=[False]*len(rings); parts=[]
-    for i,o in enumerate(rings):
-        if used[i]: continue
-        holes=[]
-        for j in range(i+1,len(rings)):
-            if not used[j] and o.contains(rings[j]): holes.append(rings[j].exterior.coords); used[j]=True
-        parts.append(ShPoly(o.exterior.coords,holes)); used[i]=True
-    poly = unary_union(parts)
-    geoms = list(poly.geoms) if poly.geom_type=='MultiPolygon' else [poly]
-    m = trimesh.util.concatenate([trimesh.creation.extrude_polygon(g,height=TEXT_DEPTH+TEXT_OVERSHOOT) for g in geoms])
-    c = m.bounds.mean(axis=0); m.apply_translation([-c[0],-c[1],0]); return m
-
-for t_start, t_end in RANGES:
-    temps = list(range(t_start, t_end-1, -5))
-    parts=[]
-    for i,T in enumerate(temps):
-        c = unit.copy(); c.apply_translation([0, i*PITCH, 0])
-        t = text_mesh(str(T)); M=np.eye(4); M[:3,:3]=R; t.apply_transform(M)
-        # place the text spanning from TEXT_DEPTH inside the face to TEXT_OVERSHOOT outside,
-        # then CUT it out of the provino (engrave) — no raised material, no Y-overhang.
-        t.apply_translation(face_c - n*TEXT_DEPTH + np.array([0,i*PITCH,0]))
-        c = trimesh.boolean.difference([c, t], engine='manifold')
-        parts.append(c)
-    asset = trimesh.util.concatenate(parts)
-    out = os.path.join(HERE, f"belt_temp_tower_{t_start}_{t_end}.stl")
-    asset.export(out)
-    dims = np.round(asset.bounds[1]-asset.bounds[0],1)
-    wt = all(p.is_watertight for p in parts)
-    print(f"  {t_start}->{t_end}: {len(temps)} zones  bbox={dims}  watertight={wt}  -> {os.path.basename(out)}")

resources/profiles/Creality.json

@@ -1,6 +1,6 @@
 {
 	"name": "Creality",
-	"version": "02.03.02.75",
+	"version": "02.03.02.76",
 	"force_update": "0",
 	"description": "Creality configurations",
 	"machine_model_list": [

resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1 (0.4 nozzle).json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1 Max_CFS-C 0.4 nozzle.json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1C 0.4 nozzle.json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1C_CFS-C 0.4 nozzle.json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1Max (0.4 nozzle).json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1_CFS-C 0.4 nozzle.json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality K1 Max_CFS-C 0.4 nozzle.json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json

@@ -38,7 +38,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE_CFS-C 0.4 nozzle.json

@@ -38,7 +38,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality K1C_CFS-C 0.4 nozzle.json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality K1_CFS-C 0.4 nozzle.json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json

@@ -128,7 +128,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",

resources/profiles/Creality/process/0.20mm Standard @Creality K1 Max_CFS-C 0.4 nozzle.json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json

@@ -124,7 +124,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",

resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE_CFS-C 0.4 nozzle.json

@@ -38,7 +38,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json

@@ -128,7 +128,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",

resources/profiles/Creality/process/0.20mm Standard @Creality K1C_CFS-C 0.4 nozzle.json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json

@@ -128,7 +128,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",

resources/profiles/Creality/process/0.20mm Standard @Creality K1_CFS-C 0.4 nozzle.json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.24mm Draft @Creality K1 Max_CFS-C 0.4 nozzle.json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json

@@ -38,7 +38,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE_CFS-C 0.4 nozzle.json

@@ -38,7 +38,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.24mm Draft @Creality K1C_CFS-C 0.4 nozzle.json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.24mm Draft @Creality K1_CFS-C 0.4 nozzle.json

@@ -39,7 +39,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "1",
 	"enable_support": "0",

resources/profiles/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json

@@ -126,7 +126,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",

resources/profiles/Creality/process/0.30mm Standard @Creality K1 SE 0.6 nozzle.json

@@ -38,7 +38,7 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enable_prime_tower": "0",
 	"enable_support": "0",

resources/profiles/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json

@@ -126,7 +126,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",

resources/profiles/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json

@@ -126,7 +126,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",

resources/profiles/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json

@@ -126,7 +126,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",

resources/profiles/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json

@@ -126,7 +126,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",

resources/profiles/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json

@@ -126,7 +126,7 @@
 	"detect_narrow_internal_solid_infill": "1",
 	"dont_filter_internal_bridges": "disabled",
 	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "1",
+	"enable_arc_fitting": "0",
 	"enable_overhang_speed": "1",
 	"enforce_support_layers": "0",
 	"ensure_vertical_shell_thickness": "ensure_all",

resources/profiles/Custom.json

@@ -1,13 +1,9 @@
 {
 	"name": "Custom Printer",
-	"version": "02.04.00.04",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "My configurations",
 	"machine_model_list": [
-		{
-			"name": "Generic Belt Printer",
-			"sub_path": "machine/MyBeltPrinter.json"
-		},
 		{
 			"name": "Generic Klipper Printer",
 			"sub_path": "machine/MyKlipper.json"
@@ -66,14 +62,6 @@
 			"name": "0.16mm Optimal @MyKlipper",
 			"sub_path": "process/0.16mm Optimal @MyKlipper.json"
 		},
-		{
-			"name": "0.12mm Fine @MyBeltPrinter",
-			"sub_path": "process/0.12mm Fine @MyBeltPrinter.json"
-		},
-		{
-			"name": "0.20mm Standard @MyBeltPrinter",
-			"sub_path": "process/0.20mm Standard @MyBeltPrinter.json"
-		},
 		{
 			"name": "0.20mm Standard @MyKlipper",
 			"sub_path": "process/0.20mm Standard @MyKlipper.json"
@@ -274,38 +262,18 @@
 			"name": "MyKlipper 0.8 nozzle",
 			"sub_path": "machine/MyKlipper 0.8 nozzle.json"
 		},
-		{
-			"name": "fdm_belt_common",
-			"sub_path": "machine/fdm_belt_common.json"
-		},
 		{
 			"name": "fdm_toolchanger_common",
 			"sub_path": "machine/fdm_toolchanger_common.json"
 		},
-		{
-			"name": "MyRRF 0.4 nozzle",
-			"sub_path": "machine/MyRRF 0.4 nozzle.json"
-		},
-		{
-			"name": "MyBeltPrinter 0.2 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.2 nozzle.json"
-		},
-		{
-			"name": "MyBeltPrinter 0.4 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.4 nozzle.json"
-		},
-		{
-			"name": "MyBeltPrinter 0.6 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.6 nozzle.json"
-		},
-		{
-			"name": "MyBeltPrinter 0.8 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.8 nozzle.json"
-		},
 		{
 			"name": "MyRepetier 0.4 nozzle",
 			"sub_path": "machine/MyRepetier 0.4 nozzle.json"
 		},
+		{
+			"name": "MyRRF 0.4 nozzle",
+			"sub_path": "machine/MyRRF 0.4 nozzle.json"
+		},
 		{
 			"name": "MyToolChanger 0.2 nozzle",
 			"sub_path": "machine/MyToolChanger 0.2 nozzle.json"

resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json

@@ -24,12 +24,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json

@@ -24,12 +24,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PA @MyToolChanger.json

@@ -24,12 +24,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json

@@ -24,12 +24,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PC @MyToolChanger.json

@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json

@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json

@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json

@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json

@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],

resources/profiles/Custom/machine/MyBeltPrinter 0.2 nozzle.json

@@ -1,27 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.2 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "3w1uyJdmm14QhDnH",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"default_print_profile": "0.12mm Fine @MyBeltPrinter",
-	"nozzle_diameter": [
-		"0.2"
-	],
-	"max_layer_height": [
-		"0.16"
-	],
-	"min_layer_height": [
-		"0.04"
-	],
-	"printer_variant": "0.2",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}

resources/profiles/Custom/machine/MyBeltPrinter 0.4 nozzle.json

@@ -1,20 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.4 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "6nRHUtvJOUffocbu",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printer_variant": "0.4",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}

resources/profiles/Custom/machine/MyBeltPrinter 0.6 nozzle.json

@@ -1,26 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.6 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "K0m9HbUNwKT4UCJV",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"nozzle_diameter": [
-		"0.6"
-	],
-	"max_layer_height": [
-		"0.4"
-	],
-	"min_layer_height": [
-		"0.12"
-	],
-	"printer_variant": "0.6",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}

resources/profiles/Custom/machine/MyBeltPrinter 0.8 nozzle.json

@@ -1,26 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.8 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "rHAweDz4eNwttPNA",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"nozzle_diameter": [
-		"0.8"
-	],
-	"max_layer_height": [
-		"0.6"
-	],
-	"min_layer_height": [
-		"0.2"
-	],
-	"printer_variant": "0.8",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}