t

* init

* update

.github/workflows/check_profiles.yml

@@ -34,6 +34,46 @@ jobs:
           python3 ./scripts/orca_extra_profile_check.py 2>&1 | tee ${{ runner.temp }}/extra_json_check.log
           exit ${PIPESTATUS[0]}
 
+      - name: Check profile indentation
+        id: indentation_check
+        continue-on-error: true
+        run: |
+          set +e
+          python3 - <<'PY' 2>&1 | tee ${{ runner.temp }}/indentation_check.log
+          import re
+          from pathlib import Path
+          import sys
+
+          profiles_root = Path("resources/profiles")
+          invalid_files = []
+
+          for file_path in sorted(profiles_root.rglob("*.json")):
+            try:
+              for line_number, line in enumerate(file_path.read_text(encoding="utf-8").splitlines(), start=1):
+                if not line.strip():
+                  continue
+                leading_ws = re.match(r"^[ \t]*", line).group(0)
+                if " " in leading_ws:
+                  invalid_files.append((file_path, line_number))
+                  break
+            except Exception as exc:
+              print(f"[ERROR] Unable to read {file_path}: {exc}")
+              invalid_files.append((file_path, 0))
+
+          if invalid_files:
+            for path, line in invalid_files:
+              if line > 0:
+                print(f"[ERROR] Space indentation found in {path}:{line}")
+              else:
+                print(f"[ERROR] Could not validate indentation in {path}")
+            print("Use tab indentation in profile JSON files (1 tab per indentation level).")
+            print("Tip: run python3 ./scripts/orca_filament_lib.py --fix --force to normalize formatting.")
+            sys.exit(1)
+
+          print("All profile JSON files use tab-only indentation.")
+          PY
+          exit ${PIPESTATUS[0]}
+
       # download
       - name: Download
         working-directory: ${{ github.workspace }}
@@ -62,7 +102,7 @@ jobs:
           exit ${PIPESTATUS[0]}
 
       - name: Prepare comment artifact
-        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.indentation_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         run: |
           mkdir -p ${{ runner.temp }}/profile-check-results
 
@@ -79,6 +119,15 @@ jobs:
               echo ""
             fi
 
+            if [ "${{ steps.indentation_check.outcome }}" = "failure" ]; then
+              echo "### Indentation Check Failed"
+              echo ""
+              echo '```'
+              head -c 30000 ${{ runner.temp }}/indentation_check.log || echo "No output captured"
+              echo '```'
+              echo ""
+            fi
+
             if [ "${{ steps.validate_system.outcome }}" = "failure" ]; then
               echo "### System Profile Validation Failed"
               echo ""
@@ -104,7 +153,7 @@ jobs:
           echo "${{ github.event.pull_request.number }}" > ${{ runner.temp }}/profile-check-results/pr_number.txt
 
       - name: Upload comment artifact
-        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.indentation_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         uses: actions/upload-artifact@v7
         with:
           name: profile-check-results
@@ -112,7 +161,7 @@ jobs:
           retention-days: 1
 
       - name: Fail if any check failed
-        if: ${{ always() && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && (steps.extra_json_check.outcome == 'failure' || steps.indentation_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         run: |
           echo "One or more profile checks failed. See above for details."
           exit 1

.github/workflows/pr-label-bot.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Ask PR author for label
-        uses: actions/github-script@v9
+        uses: actions/github-script@v7
         with:
           script: |
             function isPermissionDenied(error) {
@@ -88,7 +88,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Apply label command from PR author
-        uses: actions/github-script@v9
+        uses: actions/github-script@v7
         with:
           script: |
             function isPermissionDenied(error) {

CMakeLists.txt

@@ -785,8 +785,10 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
         set(_arch "x64")
     elseif ("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "X86")
         set(_arch "x86")
+    elseif ("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "ARM64")
+        set(_arch "arm64")
     else ()
-        message(FATAL_ERROR "Unable to detect architecture")
+        message(FATAL_ERROR "Unable to detect architecture: ${CMAKE_SYSTEM_PROCESSOR}")
     endif ()
 
     get_property(_is_multi GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)

deps/CMakeLists.txt

@@ -265,8 +265,12 @@ if (MSVC)
         message(STATUS "\nDetected X86 compiler => building X86 deps bundle\n")
         set(DEPS_ARCH "x86")
         include("deps-windows.cmake")
+    elseif ("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "ARM64")
+        message(STATUS "\nDetected ARM64 compiler => building ARM64 deps bundle\n")
+        set(DEPS_ARCH "arm64")
+        include("deps-windows.cmake")
     else ()
-        message(FATAL_ERROR "Unable to detect architecture")
+        message(FATAL_ERROR "Unable to detect architecture: ${CMAKE_SYSTEM_PROCESSOR}")
     endif ()
 elseif (APPLE)
     message("OS X SDK Path: ${CMAKE_OSX_SYSROOT}")

deps/deps-windows.cmake

@@ -36,8 +36,10 @@ if ("${DEPS_ARCH}" STREQUAL "x86")
     set(DEP_PLATFORM "Win32")
 elseif ("${DEPS_ARCH}" STREQUAL "x64")
     set(DEP_PLATFORM "x64")
+elseif ("${DEPS_ARCH}" STREQUAL "arm64")
+    set(DEP_PLATFORM "ARM64")
 else ()
-    message(FATAL_ERROR "Unsupported OS architecture")
+    message(FATAL_ERROR "Unsupported OS architecture: ${DEPS_ARCH}")
 endif ()
 
 if (${DEP_DEBUG})
@@ -64,8 +66,11 @@ if ("${DEPS_ARCH}" STREQUAL "x86")
 elseif ("${DEPS_ARCH}" STREQUAL "x64")
     set(DEP_WXWIDGETS_TARGET "TARGET_CPU=X64")
     set(DEP_WXWIDGETS_LIBDIR "vc_x64_lib")
+elseif ("${DEPS_ARCH}" STREQUAL "arm64")
+    set(DEP_WXWIDGETS_TARGET "TARGET_CPU=ARM64")
+    set(DEP_WXWIDGETS_LIBDIR "vc_arm64_lib")
 else ()
-    message(FATAL_ERROR "Unsupported OS architecture")
+    message(FATAL_ERROR "Unsupported OS architecture: ${DEPS_ARCH}")
 endif ()
 
 find_package(Git REQUIRED)

localization/i18n/cs/OrcaSlicer_cs.po

@@ -11072,7 +11072,7 @@ msgid "Gizmo assemble"
 msgstr "Gizmo sestavit"
 
 msgid "Gizmo brim ears"
-msgstr "Gizmo přídavky okraje (uši)"
+msgstr "Gizmo ouška lemu"
 
 msgid "Zoom in"
 msgstr "Přiblížit"
@@ -12583,13 +12583,13 @@ msgstr ""
 "průtokovým poměrem filamentu a případně průtokovým poměrem objektu."
 
 msgid "Set other flow ratios"
-msgstr "Set other flow ratios"
+msgstr "Nastavit další poměry průtoku"
 
 msgid "Change flow ratios for other extrusion path types."
-msgstr "Change flow ratios for other extrusion path types."
+msgstr "Změnit poměry průtoku pro další typy extruzních drah."
 
 msgid "First layer flow ratio"
-msgstr "First layer flow ratio"
+msgstr "Poměr průtoku první vrstvy"
 
 msgid ""
 "This factor affects the amount of material on the first layer for the "
@@ -12598,14 +12598,14 @@ msgid ""
 "For the first layer, the actual flow ratio for each path role (does not "
 "affect brims and skirts) will be multiplied by this value."
 msgstr ""
-"This factor affects the amount of material on the first layer for the "
-"extrusion path roles listed in this section.\n"
+"Tento faktor ovlivňuje množství materiálu na první vrstvě pro role extruzních "
+"drah uvedené v této sekci.\n"
 "\n"
-"For the first layer, the actual flow ratio for each path role (does not "
-"affect brims and skirts) will be multiplied by this value."
+"Pro první vrstvu bude skutečný poměr průtoku pro každou roli dráhy (neovlivňuje "
+"lem a sukni) vynásoben touto hodnotou."
 
 msgid "Outer wall flow ratio"
-msgstr "Outer wall flow ratio"
+msgstr "Poměr průtoku vnější stěny"
 
 msgid ""
 "This factor affects the amount of material for outer walls.\n"
@@ -12613,13 +12613,13 @@ msgid ""
 "The actual outer wall flow used is calculated by multiplying this value by "
 "the filament flow ratio, and if set, the object's flow ratio."
 msgstr ""
-"This factor affects the amount of material for outer walls.\n"
+"Tento faktor ovlivňuje množství materiálu pro vnější stěny.\n"
 "\n"
-"The actual outer wall flow used is calculated by multiplying this value by "
-"the filament flow ratio, and if set, the object's flow ratio."
+"Skutečný průtok pro vnější stěny se vypočítá vynásobením této hodnoty "
+"poměrem průtoku filamentu a případně také poměrem průtoku objektu."
 
 msgid "Inner wall flow ratio"
-msgstr "Inner wall flow ratio"
+msgstr "Poměr průtoku vnitřní stěny"
 
 msgid ""
 "This factor affects the amount of material for inner walls.\n"
@@ -12627,13 +12627,13 @@ msgid ""
 "The actual inner wall flow used is calculated by multiplying this value by "
 "the filament flow ratio, and if set, the object's flow ratio."
 msgstr ""
-"This factor affects the amount of material for inner walls.\n"
+"Tento faktor ovlivňuje množství materiálu pro vnitřní stěny.\n"
 "\n"
-"The actual inner wall flow used is calculated by multiplying this value by "
-"the filament flow ratio, and if set, the object's flow ratio."
+"Skutečný průtok pro vnitřní stěny se vypočítá vynásobením této hodnoty "
+"poměrem průtoku filamentu a případně také poměrem průtoku objektu."
 
 msgid "Overhang flow ratio"
-msgstr "Overhang flow ratio"
+msgstr "Poměr průtoku převisů"
 
 msgid ""
 "This factor affects the amount of material for overhangs.\n"
@@ -12641,13 +12641,13 @@ msgid ""
 "The actual overhang flow used is calculated by multiplying this value by the "
 "filament flow ratio, and if set, the object's flow ratio."
 msgstr ""
-"This factor affects the amount of material for overhangs.\n"
+"Tento faktor ovlivňuje množství materiálu pro převisy.\n"
 "\n"
-"The actual overhang flow used is calculated by multiplying this value by the "
-"filament flow ratio, and if set, the object's flow ratio."
+"Skutečný průtok pro převisy se vypočítá vynásobením této hodnoty "
+"poměrem průtoku filamentu a případně také poměrem průtoku objektu."
 
 msgid "Sparse infill flow ratio"
-msgstr "Sparse infill flow ratio"
+msgstr "Poměr průtoku řídké výplně"
 
 msgid ""
 "This factor affects the amount of material for sparse infill.\n"
@@ -12655,13 +12655,13 @@ msgid ""
 "The actual sparse infill flow used is calculated by multiplying this value "
 "by the filament flow ratio, and if set, the object's flow ratio."
 msgstr ""
-"This factor affects the amount of material for sparse infill.\n"
+"Tento faktor ovlivňuje množství materiálu pro řídkou výplň.\n"
 "\n"
-"The actual sparse infill flow used is calculated by multiplying this value "
-"by the filament flow ratio, and if set, the object's flow ratio."
+"Skutečný průtok pro řídkou výplň se vypočítá vynásobením této hodnoty "
+"poměrem průtoku filamentu a případně také poměrem průtoku objektu."
 
 msgid "Internal solid infill flow ratio"
-msgstr "Internal solid infill flow ratio"
+msgstr "Poměr průtoku vnitřní plné výplně"
 
 msgid ""
 "This factor affects the amount of material for internal solid infill.\n"
@@ -12669,13 +12669,13 @@ msgid ""
 "The actual internal solid infill flow used is calculated by multiplying this "
 "value by the filament flow ratio, and if set, the object's flow ratio."
 msgstr ""
-"This factor affects the amount of material for internal solid infill.\n"
+"Tento faktor ovlivňuje množství materiálu pro vnitřní plnou výplň.\n"
 "\n"
-"The actual internal solid infill flow used is calculated by multiplying this "
-"value by the filament flow ratio, and if set, the object's flow ratio."
+"Skutečný průtok pro vnitřní plnou výplň se vypočítá vynásobením této hodnoty "
+"poměrem průtoku filamentu a případně také poměrem průtoku objektu."
 
 msgid "Gap fill flow ratio"
-msgstr "Gap fill flow ratio"
+msgstr "Poměr průtoku vyplnění mezer"
 
 msgid ""
 "This factor affects the amount of material for filling the gaps.\n"
@@ -12683,13 +12683,13 @@ msgid ""
 "The actual gap filling flow used is calculated by multiplying this value by "
 "the filament flow ratio, and if set, the object's flow ratio."
 msgstr ""
-"This factor affects the amount of material for filling the gaps.\n"
+"Tento faktor ovlivňuje množství materiálu pro vyplnění mezer.\n"
 "\n"
-"The actual gap filling flow used is calculated by multiplying this value by "
-"the filament flow ratio, and if set, the object's flow ratio."
+"Skutečný průtok pro vyplnění mezer se vypočítá vynásobením této hodnoty "
+"poměrem průtoku filamentu a případně také poměrem průtoku objektu."
 
 msgid "Support flow ratio"
-msgstr "Support flow ratio"
+msgstr "Poměr průtoku podpěr"
 
 msgid ""
 "This factor affects the amount of material for support.\n"
@@ -12697,13 +12697,13 @@ msgid ""
 "The actual support flow used is calculated by multiplying this value by the "
 "filament flow ratio, and if set, the object's flow ratio."
 msgstr ""
-"This factor affects the amount of material for support.\n"
+"Tento faktor ovlivňuje množství materiálu pro podpěry.\n"
 "\n"
-"The actual support flow used is calculated by multiplying this value by the "
-"filament flow ratio, and if set, the object's flow ratio."
+"Skutečný průtok pro podpěry se vypočítá vynásobením této hodnoty "
+"poměrem průtoku filamentu a případně také poměrem průtoku objektu."
 
 msgid "Support interface flow ratio"
-msgstr "Support interface flow ratio"
+msgstr "Poměr průtoku rozhraní podpěr"
 
 msgid ""
 "This factor affects the amount of material for the support interface.\n"
@@ -12711,10 +12711,10 @@ msgid ""
 "The actual support interface flow used is calculated by multiplying this "
 "value by the filament flow ratio, and if set, the object's flow ratio."
 msgstr ""
-"This factor affects the amount of material for the support interface.\n"
+"Tento faktor ovlivňuje množství materiálu pro rozhraní podpěr.\n"
 "\n"
-"The actual support interface flow used is calculated by multiplying this "
-"value by the filament flow ratio, and if set, the object's flow ratio."
+"Skutečný průtok pro rozhraní podpěr se vypočítá vynásobením této hodnoty "
+"poměrem průtoku filamentu a případně také poměrem průtoku objektu."
 
 msgid "Precise wall"
 msgstr "Přesná stěna"

resources/profiles/Creality.json

@@ -1,6 +1,6 @@
 {
 	"name": "Creality",
-	"version": "02.03.02.70",
+	"version": "02.03.02.71",
 	"force_update": "0",
 	"description": "Creality configurations",
 	"machine_model_list": [

resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.2 nozzle.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "GM001",
 	"instantiation": "true",
+	"printer_variant": "0.2",
 	"printer_settings_id": "Creality",
 	"printer_model": "Creality Ender-3 V3 KE",
 	"gcode_flavor": "klipper",

resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "GM001",
 	"instantiation": "true",
+	"printer_variant": "0.4",
 	"printer_settings_id": "Creality",
 	"printer_model": "Creality Ender-3 V3 KE",
 	"gcode_flavor": "klipper",

resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.6 nozzle.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "GM001",
 	"instantiation": "true",
+	"printer_variant": "0.6",
 	"printer_settings_id": "Creality",
 	"printer_model": "Creality Ender-3 V3 KE",
 	"gcode_flavor": "klipper",

resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.8 nozzle.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "GM001",
 	"instantiation": "true",
+	"printer_variant": "0.8",
 	"printer_settings_id": "Creality",
 	"printer_model": "Creality Ender-3 V3 KE",
 	"gcode_flavor": "klipper",

resources/profiles/Custom.json

@@ -1,6 +1,6 @@
 {
 	"name": "Custom Printer",
-	"version": "02.03.02.60",
+	"version": "02.03.02.61",
 	"force_update": "0",
 	"description": "My configurations",
 	"machine_model_list": [

resources/profiles/LH.json

@@ -0,0 +1,159 @@
+{
+	"name": "LH",
+	"url": "https://github.com/lhndo/LH-Stinger",
+	"version": "01.00.00.00",
+	"force_update": "0",
+	"description": "LH 3D Printer Configuration",
+	"machine_model_list": [
+		{
+			"name": "LH Stinger",
+			"sub_path": "machine/LH Stinger.json"
+		},
+		{
+			"name": "LH Stinger MMU",
+			"sub_path": "machine/LH Stinger MMU.json"
+		}
+	],
+	"process_list": [
+		{
+			"name": "fdm_process_common",
+			"sub_path": "process/fdm_process_common.json"
+		},
+		{
+			"name": "fdm_process_lh_common",
+			"sub_path": "process/fdm_process_lh_common.json"
+		},
+		{
+			"name": "0.20mm Daily @LH Stinger",
+			"sub_path": "process/0.20mm Daily @LH Stinger.json"
+		},
+		{
+			"name": "0.25mm Vase Mode @LH Stinger",
+			"sub_path": "process/0.25mm Vase Mode @LH Stinger.json"
+		},
+		{
+			"name": "0.20mm TPU @LH Stinger",
+			"sub_path": "process/0.20mm TPU @LH Stinger.json"
+		},
+		{
+			"name": "0.20mm Strength @LH Stinger",
+			"sub_path": "process/0.20mm Strength @LH Stinger.json"
+		},
+		{
+			"name": "0.20mm Speed @LH Stinger",
+			"sub_path": "process/0.20mm Speed @LH Stinger.json"
+		},
+		{
+			"name": "0.20mm Solid @LH Stinger",
+			"sub_path": "process/0.20mm Solid @LH Stinger.json"
+		},
+		{
+			"name": "0.20mm Quiet @LH Stinger",
+			"sub_path": "process/0.20mm Quiet @LH Stinger.json"
+		},
+		{
+			"name": "0.20mm PETG @LH Stinger",
+			"sub_path": "process/0.20mm PETG @LH Stinger.json"
+		},
+		{
+			"name": "0.20mm MMU @LH Stinger",
+			"sub_path": "process/0.20mm MMU @LH Stinger.json"
+		},
+		{
+			"name": "0.10mm HueForge @LH Stinger",
+			"sub_path": "process/0.10mm HueForge @LH Stinger.json"
+		},
+		{
+			"name": "0.14mm Detail Strength @LH Stinger",
+			"sub_path": "process/0.14mm Detail Strength @LH Stinger.json"
+		},
+		{
+			"name": "0.14mm Detail @LH Stinger",
+			"sub_path": "process/0.14mm Detail @LH Stinger.json"
+		}
+	],
+	"filament_list": [
+		{
+			"name": "fdm_filament_common",
+			"sub_path": "filament/fdm_filament_common.json"
+		},
+		{
+			"name": "fdm_filament_abs",
+			"sub_path": "filament/fdm_filament_abs.json"
+		},
+		{
+			"name": "fdm_filament_asa",
+			"sub_path": "filament/fdm_filament_asa.json"
+		},
+		{
+			"name": "fdm_filament_pc",
+			"sub_path": "filament/fdm_filament_pc.json"
+		},
+		{
+			"name": "fdm_filament_pet",
+			"sub_path": "filament/fdm_filament_pet.json"
+		},
+		{
+			"name": "fdm_filament_pla",
+			"sub_path": "filament/fdm_filament_pla.json"
+		},
+		{
+			"name": "fdm_filament_tpu",
+			"sub_path": "filament/fdm_filament_tpu.json"
+		},
+		{
+			"name": "LHS ASA",
+			"sub_path": "filament/LHS ASA.json"
+		},
+		{
+			"name": "LHS ABS",
+			"sub_path": "filament/LHS ABS.json"
+		},
+		{
+			"name": "LHS TPU",
+			"sub_path": "filament/LHS TPU.json"
+		},
+		{
+			"name": "LHS PLA",
+			"sub_path": "filament/LHS PLA.json"
+		},
+		{
+			"name": "LHS TPU Foamy 78A",
+			"sub_path": "filament/LHS TPU Foamy 78A.json"
+		},
+		{
+			"name": "LHS PETG",
+			"sub_path": "filament/LHS PETG.json"
+		},
+		{
+			"name": "LHS PCTG",
+			"sub_path": "filament/LHS PCTG.json"
+		},
+		{
+			"name": "LHS PC CF",
+			"sub_path": "filament/LHS PC CF.json"
+		}
+	],
+	"machine_list": [
+		{
+			"name": "fdm_machine_common",
+			"sub_path": "machine/fdm_machine_common.json"
+		},
+		{
+			"name": "fdm_lh_common",
+			"sub_path": "machine/fdm_lh_common.json"
+		},
+		{
+			"name": "fdm_lh_mmu_common",
+			"sub_path": "machine/fdm_lh_mmu_common.json"
+		},
+		{
+			"name": "LH Stinger 0.4 nozzle",
+			"sub_path": "machine/LH Stinger 0.4 nozzle.json"
+		},
+		{
+			"name": "LH Stinger MMU 0.4 nozzle",
+			"sub_path": "machine/LH Stinger MMU 0.4 nozzle.json"
+		}
+	]
+}

resources/profiles/LH/filament/LHS ABS.json

@@ -0,0 +1,355 @@
+{
+	"name": "LHS ABS",
+	"type": "filament",
+	"filament_id": "LHF_abs",
+	"setting_id": "LHF_S_abs",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_asa",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"2"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"100"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"25"
+	],
+	"fan_max_speed": [
+		"25"
+	],
+	"fan_min_speed": [
+		"25"
+	],
+	"filament_adaptive_volumetric_speed": [
+		"0"
+	],
+	"filament_adhesiveness_category": [
+		"0"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_flush_temp": [
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0"
+	],
+	"filament_ironing_flow": [
+		"nil"
+	],
+	"filament_ironing_inset": [
+		"nil"
+	],
+	"filament_ironing_spacing": [
+		"nil"
+	],
+	"filament_ironing_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_printable": [
+		"3"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_settings_id": [
+		"LHS - ASA"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n; MPC_SET HEATER=extruder FILAMENT_DENSITY=1.07 FILAMENT_HEAT_CAPACITY=2.1\nMAX_FAN LINK_AUX=0"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_tower_interface_pre_extrusion_dist": [
+		"10"
+	],
+	"filament_tower_interface_pre_extrusion_length": [
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"-1"
+	],
+	"filament_tower_interface_purge_volume": [
+		"20"
+	],
+	"filament_tower_ironing_area": [
+		"4"
+	],
+	"filament_type": [
+		"ASA"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"4"
+	],
+	"hot_plate_temp": [
+		"105"
+	],
+	"hot_plate_temp_initial_layer": [
+		"105"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"ironing_fan_speed": [
+		"-1"
+	],
+	"long_retractions_when_ec": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"50"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.019"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"retraction_distances_when_ec": [
+		"10"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"15"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"105"
+	],
+	"filament_vendor": [
+		"LH Stinger"
+	],
+	"volumetric_speed_coefficients": [
+		""
+	]
+}

resources/profiles/LH/filament/LHS ASA.json

@@ -0,0 +1,352 @@
+{
+	"name": "LHS ASA",
+	"filament_id": "LHF_asa",
+	"setting_id": "LHF_S_asa",
+	"type": "filament",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_asa",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"2"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"100"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"fan_cooling_layer_time": [
+		"25"
+	],
+	"fan_max_speed": [
+		"25"
+	],
+	"fan_min_speed": [
+		"25"
+	],
+	"filament_adaptive_volumetric_speed": [
+		"0"
+	],
+	"filament_adhesiveness_category": [
+		"0"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.926"
+	],
+	"filament_flush_temp": [
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0"
+	],
+	"filament_ironing_flow": [
+		"nil"
+	],
+	"filament_ironing_inset": [
+		"nil"
+	],
+	"filament_ironing_spacing": [
+		"nil"
+	],
+	"filament_ironing_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_printable": [
+		"3"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n; MPC_SET HEATER=extruder FILAMENT_DENSITY=1.07 FILAMENT_HEAT_CAPACITY=2.1\nMAX_FAN LINK_AUX=0"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_tower_interface_pre_extrusion_dist": [
+		"10"
+	],
+	"filament_tower_interface_pre_extrusion_length": [
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"-1"
+	],
+	"filament_tower_interface_purge_volume": [
+		"20"
+	],
+	"filament_tower_ironing_area": [
+		"4"
+	],
+	"filament_type": [
+		"ASA"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"4"
+	],
+	"hot_plate_temp": [
+		"105"
+	],
+	"hot_plate_temp_initial_layer": [
+		"105"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"ironing_fan_speed": [
+		"-1"
+	],
+	"long_retractions_when_ec": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"50"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.019"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"retraction_distances_when_ec": [
+		"10"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"15"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"105"
+	],
+	"filament_vendor": [
+		"LH Stinger"
+	],
+	"volumetric_speed_coefficients": [
+		""
+	]
+}

resources/profiles/LH/filament/LHS PC CF.json

@@ -0,0 +1,122 @@
+{
+	"name": "LHS PC CF",
+	"type": "filament",
+	"filament_id": "LHF_pccf",
+	"setting_id": "LHF_S_pccf",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_pla",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"4"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"fan_cooling_layer_time": [
+		"11"
+	],
+	"fan_max_speed": [
+		"5"
+	],
+	"fan_min_speed": [
+		"5"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_density": [
+		"1.18"
+	],
+	"filament_flow_ratio": [
+		"0.945"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"35"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		"Extrusion Override set to a higher value\nAux disabled\nZ-Offset increased to 0.025 due to nozzle expansion at 300C"
+	],
+	"filament_retraction_length": [
+		"0.4"
+	],
+	"filament_shrink": [
+		"99.8%"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n; MPC_SET HEATER=extruder FILAMENT_DENSITY=1.36 FILAMENT_HEAT_CAPACITY=2.6\nMAX_FAN LINK_AUX=0"
+	],
+	"filament_type": [
+		"PC"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"105"
+	],
+	"hot_plate_temp_initial_layer": [
+		"105"
+	],
+	"is_custom_defined": "0",
+	"nozzle_temperature": [
+		"300"
+	],
+	"nozzle_temperature_initial_layer": [
+		"300"
+	],
+	"nozzle_temperature_range_high": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"270"
+	],
+	"overhang_fan_speed": [
+		"35"
+	],
+	"pressure_advance": [
+		"0.025"
+	],
+	"slow_down_layer_time": [
+		"7"
+	],
+	"slow_down_min_speed": [
+		"12"
+	],
+	"filament_vendor": [
+		"LH Stinger"
+	],
+	"temperature_vitrification": [
+		"140"
+	]
+}

resources/profiles/LH/filament/LHS PCTG.json

@@ -0,0 +1,352 @@
+{
+	"name": "LHS PCTG",
+	"type": "filament",
+	"filament_id": "LHF_pctg",
+	"setting_id": "LHF_S_pctg",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_pla",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"13"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_adaptive_volumetric_speed": [
+		"0"
+	],
+	"filament_adhesiveness_category": [
+		"0"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"25"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.953"
+	],
+	"filament_flush_temp": [
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0"
+	],
+	"filament_ironing_flow": [
+		"nil"
+	],
+	"filament_ironing_inset": [
+		"nil"
+	],
+	"filament_ironing_spacing": [
+		"nil"
+	],
+	"filament_ironing_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"25"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_printable": [
+		"3"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n; MPC_SET HEATER=extruder FILAMENT_DENSITY=1.25 FILAMENT_HEAT_CAPACITY=5.5\nMAX_FAN LINK_AUX=0"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_tower_interface_pre_extrusion_dist": [
+		"10"
+	],
+	"filament_tower_interface_pre_extrusion_length": [
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"-1"
+	],
+	"filament_tower_interface_purge_volume": [
+		"20"
+	],
+	"filament_tower_ironing_area": [
+		"4"
+	],
+	"filament_type": [
+		"PCTG"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"85"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"30"
+	],
+	"ironing_fan_speed": [
+		"-1"
+	],
+	"long_retractions_when_ec": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"280"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"50"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.038"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"retraction_distances_when_ec": [
+		"10"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"15"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"support_material_interface_fan_speed": [
+		"50"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_vendor": [
+		"LH Stinger"
+	],
+	"volumetric_speed_coefficients": [
+		""
+	]
+}

resources/profiles/LH/filament/LHS PETG.json

@@ -0,0 +1,352 @@
+{
+	"name": "LHS PETG",
+	"type": "filament",
+	"filament_id": "LHF_petg",
+	"setting_id": "LHF_S_petg",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_pla",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"15"
+	],
+	"fan_max_speed": [
+		"65"
+	],
+	"fan_min_speed": [
+		"35"
+	],
+	"filament_adaptive_volumetric_speed": [
+		"0"
+	],
+	"filament_adhesiveness_category": [
+		"0"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.923"
+	],
+	"filament_flush_temp": [
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0"
+	],
+	"filament_ironing_flow": [
+		"nil"
+	],
+	"filament_ironing_inset": [
+		"nil"
+	],
+	"filament_ironing_spacing": [
+		"nil"
+	],
+	"filament_ironing_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"27"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_printable": [
+		"3"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n; MPC_SET HEATER=extruder FILAMENT_DENSITY=1.27 FILAMENT_HEAT_CAPACITY=5.5\nMAX_FAN LINK_AUX=0"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_tower_interface_pre_extrusion_dist": [
+		"10"
+	],
+	"filament_tower_interface_pre_extrusion_length": [
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"-1"
+	],
+	"filament_tower_interface_purge_volume": [
+		"20"
+	],
+	"filament_tower_ironing_area": [
+		"4"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"50"
+	],
+	"ironing_fan_speed": [
+		"-1"
+	],
+	"long_retractions_when_ec": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.047"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"retraction_distances_when_ec": [
+		"10"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"15"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"support_material_interface_fan_speed": [
+		"80"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_vendor": [
+		"LH Stinger"
+	],
+	"volumetric_speed_coefficients": [
+		""
+	]
+}

resources/profiles/LH/filament/LHS PLA.json

@@ -0,0 +1,352 @@
+{
+	"name": "LHS PLA",
+	"type": "filament",
+	"filament_id": "LHF_pla",
+	"setting_id": "LHF_S_pla",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_pla",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"65"
+	],
+	"filament_adaptive_volumetric_speed": [
+		"0"
+	],
+	"filament_adhesiveness_category": [
+		"0"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_flush_temp": [
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0"
+	],
+	"filament_ironing_flow": [
+		"nil"
+	],
+	"filament_ironing_inset": [
+		"nil"
+	],
+	"filament_ironing_spacing": [
+		"nil"
+	],
+	"filament_ironing_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_printable": [
+		"3"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n; MPC_SET HEATER=extruder FILAMENT_DENSITY=1.24 FILAMENT_HEAT_CAPACITY=3.2\n; MAX_FAN LINK_AUX=0"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_tower_interface_pre_extrusion_dist": [
+		"10"
+	],
+	"filament_tower_interface_pre_extrusion_length": [
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"-1"
+	],
+	"filament_tower_interface_purge_volume": [
+		"20"
+	],
+	"filament_tower_ironing_area": [
+		"4"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"ironing_fan_speed": [
+		"-1"
+	],
+	"long_retractions_when_ec": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"235"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"retraction_distances_when_ec": [
+		"10"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"15"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"support_material_interface_fan_speed": [
+		"100"
+	],
+	"temperature_vitrification": [
+		"45"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	],
+	"filament_vendor": [
+		"LH Stinger"
+	],
+	"volumetric_speed_coefficients": [
+		""
+	]
+}

resources/profiles/LH/filament/LHS TPU Foamy 78A.json

@@ -0,0 +1,352 @@
+{
+	"name": "LHS TPU Foamy 78A",
+	"type": "filament",
+	"filament_id": "LHF_ftpuf",
+	"setting_id": "LHF_S_ftpuf",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_tpu",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"55"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"30"
+	],
+	"cool_plate_temp_initial_layer": [
+		"30"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"30"
+	],
+	"eng_plate_temp_initial_layer": [
+		"30"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_adaptive_volumetric_speed": [
+		"0"
+	],
+	"filament_adhesiveness_category": [
+		"0"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.02"
+	],
+	"filament_deretraction_speed": [
+		"20"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.85"
+	],
+	"filament_flush_temp": [
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0"
+	],
+	"filament_ironing_flow": [
+		"nil"
+	],
+	"filament_ironing_inset": [
+		"nil"
+	],
+	"filament_ironing_spacing": [
+		"nil"
+	],
+	"filament_ironing_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"4"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_printable": [
+		"3"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n; MPC_SET HEATER=extruder FILAMENT_DENSITY=1.02 FILAMENT_HEAT_CAPACITY=2\n; MAX_FAN LINK_AUX=0 \nSET_PRESSURE_ADVANCE EXTRUDER=extruder SMOOTH_TIME=0.04"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_tower_interface_pre_extrusion_dist": [
+		"10"
+	],
+	"filament_tower_interface_pre_extrusion_length": [
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"-1"
+	],
+	"filament_tower_interface_purge_volume": [
+		"20"
+	],
+	"filament_tower_ironing_area": [
+		"4"
+	],
+	"filament_type": [
+		"TPU"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"0"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"25"
+	],
+	"hot_plate_temp_initial_layer": [
+		"25"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"ironing_fan_speed": [
+		"-1"
+	],
+	"long_retractions_when_ec": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"265"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"70"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.06"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"retraction_distances_when_ec": [
+		"10"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"5"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"support_material_interface_fan_speed": [
+		"100"
+	],
+	"temperature_vitrification": [
+		"30"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"35"
+	],
+	"textured_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_vendor": [
+		"LH Stinger"
+	],
+	"volumetric_speed_coefficients": [
+		""
+	]
+}

resources/profiles/LH/filament/LHS TPU.json

@@ -0,0 +1,352 @@
+{
+	"name": "LHS TPU",
+	"type": "filament",
+	"filament_id": "LHF_ptpu_pl",
+	"setting_id": "LHF_S_ptpu_pl",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_tpu",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"55"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"30"
+	],
+	"cool_plate_temp_initial_layer": [
+		"30"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"30"
+	],
+	"eng_plate_temp_initial_layer": [
+		"30"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_adaptive_volumetric_speed": [
+		"0"
+	],
+	"filament_adhesiveness_category": [
+		"0"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_deretraction_speed": [
+		"20"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"filament_flow_ratio": [
+		"0.965"
+	],
+	"filament_flush_temp": [
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0"
+	],
+	"filament_ironing_flow": [
+		"nil"
+	],
+	"filament_ironing_inset": [
+		"nil"
+	],
+	"filament_ironing_spacing": [
+		"nil"
+	],
+	"filament_ironing_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"20"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_printable": [
+		"3"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"Bottom Only"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.9"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"35"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n; MPC_SET HEATER=extruder FILAMENT_DENSITY=1.22 FILAMENT_HEAT_CAPACITY=2\n; MAX_FAN LINK_AUX=0\nSET_PRESSURE_ADVANCE EXTRUDER=extruder SMOOTH_TIME=0.04"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_tower_interface_pre_extrusion_dist": [
+		"10"
+	],
+	"filament_tower_interface_pre_extrusion_length": [
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"-1"
+	],
+	"filament_tower_interface_purge_volume": [
+		"20"
+	],
+	"filament_tower_ironing_area": [
+		"4"
+	],
+	"filament_type": [
+		"TPU"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"0"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"30"
+	],
+	"hot_plate_temp_initial_layer": [
+		"30"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"ironing_fan_speed": [
+		"-1"
+	],
+	"long_retractions_when_ec": [
+		"0"
+	],
+	"nozzle_temperature": [
+		"245"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.08"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"retraction_distances_when_ec": [
+		"10"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"12"
+	],
+	"supertack_plate_temp": [
+		"0"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"0"
+	],
+	"support_material_interface_fan_speed": [
+		"100"
+	],
+	"temperature_vitrification": [
+		"30"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"35"
+	],
+	"textured_plate_temp_initial_layer": [
+		"35"
+	],
+	"filament_vendor": [
+		"LH Stinger"
+	],
+	"volumetric_speed_coefficients": [
+		""
+	]
+}

resources/profiles/LH/filament/fdm_filament_abs.json

@@ -0,0 +1,88 @@
+{
+	"type": "filament",
+	"name": "fdm_filament_abs",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"instantiation": "false",
+	"cool_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"hot_plate_temp": [
+		"105"
+	],
+	"textured_plate_temp": [
+		"105"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"hot_plate_temp_initial_layer": [
+		"105"
+	],
+	"textured_plate_temp_initial_layer": [
+		"105"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"filament_max_volumetric_speed": [
+		"28.6"
+	],
+	"filament_type": [
+		"ABS"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"slow_down_layer_time": [
+		"3"
+	]
+}

resources/profiles/LH/filament/fdm_filament_asa.json

@@ -0,0 +1,88 @@
+{
+	"type": "filament",
+	"name": "fdm_filament_asa",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"instantiation": "false",
+	"cool_plate_temp": [
+		"105"
+	],
+	"eng_plate_temp": [
+		"105"
+	],
+	"hot_plate_temp": [
+		"105"
+	],
+	"textured_plate_temp": [
+		"105"
+	],
+	"cool_plate_temp_initial_layer": [
+		"105"
+	],
+	"eng_plate_temp_initial_layer": [
+		"105"
+	],
+	"hot_plate_temp_initial_layer": [
+		"105"
+	],
+	"textured_plate_temp_initial_layer": [
+		"105"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"fan_cooling_layer_time": [
+		"35"
+	],
+	"filament_max_volumetric_speed": [
+		"28.6"
+	],
+	"filament_type": [
+		"ASA"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"slow_down_layer_time": [
+		"3"
+	]
+}

resources/profiles/LH/filament/fdm_filament_common.json

@@ -0,0 +1,141 @@
+{
+	"type": "filament",
+	"name": "fdm_filament_common",
+	"from": "system",
+	"instantiation": "false",
+	"cool_plate_temp": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"cool_plate_temp_initial_layer": [
+		"60"
+	],
+	"eng_plate_temp_initial_layer": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode \n"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"60"
+	],
+	"filament_cost": [
+		"0"
+	],
+	"filament_density": [
+		"0"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_max_volumetric_speed": [
+		"0"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_settings_id": [
+		""
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"bed_type": [
+		"Cool Plate"
+	],
+	"nozzle_temperature_initial_layer": [
+		"200"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"35"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"filament_start_gcode": [
+		"; Filament gcode\n"
+	],
+	"nozzle_temperature": [
+		"200"
+	],
+	"temperature_vitrification": [
+		"100"
+	]
+}

resources/profiles/LH/filament/fdm_filament_pc.json

@@ -0,0 +1,88 @@
+{
+	"type": "filament",
+	"name": "fdm_filament_pc",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"instantiation": "false",
+	"cool_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"110"
+	],
+	"hot_plate_temp": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"110"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"110"
+	],
+	"hot_plate_temp_initial_layer": [
+		"110"
+	],
+	"textured_plate_temp_initial_layer": [
+		"110"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"filament_max_volumetric_speed": [
+		"23.2"
+	],
+	"filament_type": [
+		"PC"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"overhang_fan_speed": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"280"
+	],
+	"temperature_vitrification": [
+		"140"
+	],
+	"nozzle_temperature_range_low": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"slow_down_layer_time": [
+		"2"
+	]
+}

resources/profiles/LH/filament/fdm_filament_pet.json

@@ -0,0 +1,82 @@
+{
+	"type": "filament",
+	"name": "fdm_filament_pet",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"instantiation": "false",
+	"cool_plate_temp": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"cool_plate_temp_initial_layer": [
+		"60"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"filament_max_volumetric_speed": [
+		"25"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"nozzle_temperature_initial_layer": [
+		"255"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"255"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/LH/filament/fdm_filament_pla.json

@@ -0,0 +1,94 @@
+{
+	"type": "filament",
+	"name": "fdm_filament_pla",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"instantiation": "false",
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"cool_plate_temp": [
+		"60"
+	],
+	"eng_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"cool_plate_temp_initial_layer": [
+		"60"
+	],
+	"eng_plate_temp_initial_layer": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/LH/filament/fdm_filament_tpu.json

@@ -0,0 +1,88 @@
+{
+	"type": "filament",
+	"name": "fdm_filament_tpu",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"instantiation": "false",
+	"cool_plate_temp": [
+		"30"
+	],
+	"eng_plate_temp": [
+		"30"
+	],
+	"hot_plate_temp": [
+		"35"
+	],
+	"textured_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"30"
+	],
+	"eng_plate_temp_initial_layer": [
+		"30"
+	],
+	"hot_plate_temp_initial_layer": [
+		"35"
+	],
+	"textured_plate_temp_initial_layer": [
+		"35"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"filament_max_volumetric_speed": [
+		"15"
+	],
+	"filament_type": [
+		"TPU"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_retraction_length": [
+		"0.4"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"nozzle_temperature_range_low": [
+		"200"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/LH/machine/LH Stinger 0.4 nozzle.json

@@ -0,0 +1,16 @@
+{
+	"type": "machine",
+	"name": "LH Stinger 0.4 nozzle",
+	"inherits": "fdm_lh_common",
+	"from": "system",
+	"setting_id": "LHS_m01_04",
+	"instantiation": "true",
+	"printer_model": "LH Stinger",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"default_filament_profile": [
+		"LHS PLA"
+	],
+	"printer_variant": "0.4"
+}

resources/profiles/LH/machine/LH Stinger MMU 0.4 nozzle.json

@@ -0,0 +1,16 @@
+{
+	"type": "machine",
+	"name": "LH Stinger MMU 0.4 nozzle",
+	"inherits": "fdm_lh_mmu_common",
+	"from": "system",
+	"setting_id": "LHS_m01_mmu_04",
+	"instantiation": "true",
+	"printer_model": "LH Stinger MMU",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"default_filament_profile": [
+		"LHS PLA"
+	],
+	"printer_variant": "0.4"
+}

resources/profiles/LH/machine/LH Stinger MMU.json

@@ -0,0 +1,12 @@
+{
+	"type": "machine_model",
+	"name": "LH Stinger MMU",
+	"model_id": "LHS_M_mmu",
+	"nozzle_diameter": "0.4",
+	"machine_tech": "FFF",
+	"family": "LH",
+	"bed_model": "LH_Stinger_buildplate_model.STL",
+	"bed_texture": "LH_Stinger_MMU_buildplate_texture.png",
+	"hotend_model": "",
+	"default_materials": "LHS PLA;LHS PETG;LHS PCTG;LHS ASA;LHS ABS;LHS PC CF;LHS TPU Foamy 78A;LHS TPU;"
+}

resources/profiles/LH/machine/LH Stinger.json

@@ -0,0 +1,12 @@
+{
+	"type": "machine_model",
+	"name": "LH Stinger",
+	"model_id": "LHS_M_base",
+	"nozzle_diameter": "0.4",
+	"machine_tech": "FFF",
+	"family": "LH",
+	"bed_model": "LH_Stinger_buildplate_model.STL",
+	"bed_texture": "LH_Stinger_buildplate_texture.png",
+	"hotend_model": "",
+	"default_materials": "LHS PLA;LHS PETG;LHS PCTG;LHS ASA;LHS ABS;LHS PC CF;LHS TPU Foamy 78A;LHS TPU;"
+}

resources/profiles/LH/machine/fdm_lh_common.json

@@ -0,0 +1,157 @@
+{
+	"type": "machine",
+	"name": "fdm_lh_common",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"instantiation": "false",
+	"gcode_flavor": "klipper",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"200000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"200000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"200000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"200000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"2000",
+		"200"
+	],
+	"machine_max_speed_e": [
+		"200",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"1000",
+		"200"
+	],
+	"machine_max_speed_y": [
+		"1000",
+		"200"
+	],
+	"machine_max_speed_z": [
+		"100",
+		"12"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"2.5"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"9"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"9"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"0.4"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printable_area": [
+		"18x38",
+		"218x38",
+		"218x238",
+		"18x238"
+	],
+	"printable_height": "180",
+	"extruder_clearance_radius": "65",
+	"extruder_clearance_height_to_rod": "36",
+	"extruder_clearance_height_to_lid": "140",
+	"printer_settings_id": "",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_length": [
+		"0.3"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"z_hop": [
+		"0.2"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retraction_speed": [
+		"40"
+	],
+	"deretraction_speed": [
+		"30"
+	],
+	"retract_lift_enforce": [
+		"Top and Bottom"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "",
+	"manual_filament_change": "1",
+	"wipe": [
+		"1"
+	],
+	"default_filament_profile": [
+		"LH Generic PLA"
+	],
+	"enable_filament_ramming": "0",
+	"default_print_profile": "0.20mm Daily @LH Stinger",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"machine_start_gcode": "PRINT_START_LHS BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] AUTOMESH=1 AUTOPURGE=1 QUIETMODE={if print_preset =~ /.*Quiet.*/ }1{else}0{endif}\n",
+	"machine_end_gcode": "PRINT_END",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGES\n;[layer_z]",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"machine_pause_gcode": "PAUSE",
+	"scan_first_layer": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"bed_temperature_formula": "by_first_filament",
+	"auxiliary_fan": "1"
+}

resources/profiles/LH/machine/fdm_lh_mmu_common.json

@@ -0,0 +1,21 @@
+{
+	"type": "machine",
+	"name": "fdm_lh_mmu_common",
+	"inherits": "fdm_lh_common",
+	"from": "system",
+	"instantiation": "false",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"enable_filament_ramming": "0",
+	"extra_loading_move": "0",
+	"machine_start_gcode": " _SP_PRINT_START LANE=[initial_tool] TEMP=[nozzle_temperature_initial_layer]\n\nPRINT_START_LHS BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] AUTOMESH=1 AUTOPURGE=1 QUIETMODE={if print_preset =~ /.*Quiet.*/ }1{else}0{endif}\n\n",
+	"change_filament_gcode": " _SP_SET_PURGE PURGE=[first_flush_volume] ",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGES\n;[layer_z]",
+	"machine_end_gcode": "PRINT_END\n\n_SP_PRINT_END",
+	"machine_tool_change_time": "20",
+	"parking_pos_retraction": "0",
+	"manual_filament_change": "0",
+	"retract_length_toolchange": [
+		"0"
+	]
+}

resources/profiles/LH/machine/fdm_machine_common.json

@@ -0,0 +1,119 @@
+{
+	"type": "machine",
+	"name": "fdm_machine_common",
+	"from": "system",
+	"instantiation": "false",
+	"printer_technology": "FFF",
+	"deretraction_speed": [
+		"40"
+	],
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"gcode_flavor": "marlin",
+	"silent_mode": "0",
+	"machine_max_acceleration_e": [
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"10000"
+	],
+	"machine_max_acceleration_retracting": [
+		"1000"
+	],
+	"machine_max_acceleration_x": [
+		"10000"
+	],
+	"machine_max_acceleration_y": [
+		"10000"
+	],
+	"machine_max_acceleration_z": [
+		"500"
+	],
+	"machine_max_speed_e": [
+		"60"
+	],
+	"machine_max_speed_x": [
+		"500"
+	],
+	"machine_max_speed_y": [
+		"500"
+	],
+	"machine_max_speed_z": [
+		"10"
+	],
+	"machine_max_jerk_e": [
+		"5"
+	],
+	"machine_max_jerk_x": [
+		"8"
+	],
+	"machine_max_jerk_y": [
+		"8"
+	],
+	"machine_max_jerk_z": [
+		"0.4"
+	],
+	"machine_min_extruding_rate": [
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0"
+	],
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printable_height": "250",
+	"extruder_clearance_radius": "65",
+	"extruder_clearance_height_to_rod": "36",
+	"extruder_clearance_height_to_lid": "140",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printer_settings_id": "",
+	"printer_variant": "0.4",
+	"retraction_minimum_travel": [
+		"2"
+	],
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_length": [
+		"1"
+	],
+	"retract_length_toolchange": [
+		"1"
+	],
+	"z_hop": [
+		"0"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "",
+	"wipe": [
+		"1"
+	],
+	"default_print_profile": "",
+	"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
+	"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"machine_pause_gcode": "M601"
+}

resources/profiles/LH/process/0.10mm HueForge @LH Stinger.json

@@ -0,0 +1,42 @@
+{
+	"type": "process",
+	"name": "0.10mm HueForge @LH Stinger",
+	"inherits": "fdm_process_lh_common",
+	"from": "system",
+	"setting_id": "LHS_P_hueforge",
+	"instantiation": "true",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"bottom_shell_layers": "999",
+	"bottom_solid_infill_flow_ratio": "0.98",
+	"detect_narrow_internal_solid_infill": "0",
+	"ensure_vertical_shell_thickness": "none",
+	"initial_layer_acceleration": "1000",
+	"initial_layer_infill_speed": "150",
+	"initial_layer_print_height": "0.16",
+	"initial_layer_speed": "80",
+	"layer_height": "0.1",
+	"max_travel_detour_distance": "60",
+	"print_extruder_id": [
+		"1"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"reduce_crossing_wall": "1",
+	"skirt_loops": "1",
+	"slice_closing_radius": "0.042",
+	"sparse_infill_density": "0%",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "0",
+	"top_solid_infill_flow_ratio": "0.98",
+	"brim_type": "no_brim",
+	"wall_generator": "arachne",
+	"wall_sequence": "inner wall/outer wall",
+	"reduce_infill_retraction": "1",
+	"gap_fill_target": "nowhere",
+	"filter_out_gap_fill": "0.5",
+	"wall_loops": "1"
+}

resources/profiles/LH/process/0.14mm Detail @LH Stinger.json

@@ -0,0 +1,54 @@
+{
+	"type": "process",
+	"name": "0.14mm Detail @LH Stinger",
+	"inherits": "fdm_process_lh_common",
+	"from": "system",
+	"setting_id": "LHS_P_detail",
+	"instantiation": "true",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"bottom_shell_layers": "5",
+	"bridge_flow": "1.2",
+	"default_jerk": "10",
+	"enable_support": "1",
+	"ensure_vertical_shell_thickness": "ensure_moderate",
+	"filter_out_gap_fill": "10",
+	"infill_jerk": "10",
+	"infill_wall_overlap": "10%",
+	"initial_layer_infill_speed": "90",
+	"initial_layer_jerk": "10",
+	"initial_layer_travel_speed": "250",
+	"inner_wall_jerk": "10",
+	"internal_bridge_flow": "1.2",
+	"layer_height": "0.14",
+	"max_travel_detour_distance": "50",
+	"outer_wall_jerk": "10",
+	"print_extruder_id": [
+		"1"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"reduce_crossing_wall": "1",
+	"skirt_loops": "2",
+	"slow_down_layers": "2",
+	"small_perimeter_speed": "75%",
+	"small_perimeter_threshold": "3",
+	"sparse_infill_pattern": "rectilinear",
+	"sparse_infill_density": "15%",
+	"support_angle": "45",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "1.5",
+	"support_bottom_z_distance": "0.15",
+	"support_style": "organic",
+	"support_type": "tree(auto)",
+	"top_shell_layers": "6",
+	"top_surface_jerk": "10",
+	"wall_generator": "arachne",
+	"min_length_factor": "0.5",
+	"gap_fill_target": "nowhere",
+	"wall_loops": "3",
+	"travel_jerk": "10"
+}

resources/profiles/LH/process/0.14mm Detail Strength @LH Stinger.json

@@ -0,0 +1,67 @@
+{
+	"type": "process",
+	"name": "0.14mm Detail Strength @LH Stinger",
+	"inherits": "fdm_process_lh_common",
+	"from": "system",
+	"setting_id": "LHS_P_detail_strength",
+	"instantiation": "true",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"bottom_shell_layers": "6",
+	"bottom_shell_thickness": "0.8",
+	"bridge_acceleration": "7500",
+	"bridge_flow": "1.2",
+	"brim_width": "3",
+	"default_acceleration": "15000",
+	"default_jerk": "10",
+	"gap_infill_speed": "200",
+	"infill_anchor": "1000",
+	"infill_anchor_max": "1000",
+	"infill_jerk": "10",
+	"initial_layer_infill_speed": "90",
+	"initial_layer_jerk": "10",
+	"initial_layer_travel_speed": "250",
+	"inner_wall_acceleration": "10000",
+	"inner_wall_speed": "200",
+	"inner_wall_jerk": "10",
+	"internal_solid_infill_acceleration": "15000",
+	"internal_solid_infill_speed": "200",
+	"layer_height": "0.14",
+	"max_travel_detour_distance": "50",
+	"outer_wall_acceleration": "7500",
+	"outer_wall_jerk": "10",
+	"outer_wall_speed": "200",
+	"print_extruder_id": [
+		"1"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"reduce_crossing_wall": "1",
+	"skirt_loops": "2",
+	"slow_down_layers": "2",
+	"small_perimeter_speed": "75%",
+	"small_perimeter_threshold": "3",
+	"sparse_infill_acceleration": "15000",
+	"sparse_infill_speed": "200",
+	"sparse_infill_density": "40%",
+	"sparse_infill_pattern": "gyroid",
+	"support_base_pattern_spacing": "1.5",
+	"support_bottom_interface_spacing": "0.3",
+	"support_bottom_z_distance": "0.15",
+	"support_interface_speed": "300",
+	"support_speed": "200",
+	"support_type": "normal(manual)",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "1",
+	"top_surface_acceleration": "7500",
+	"top_surface_jerk": "10",
+	"top_surface_speed": "200",
+	"travel_jerk": "10",
+	"wall_generator": "arachne",
+	"wall_sequence": "inner wall/outer wall",
+	"top_bottom_infill_wall_overlap": "25%",
+	"wall_loops": "4"
+}

resources/profiles/LH/process/0.20mm Daily @LH Stinger.json

@@ -0,0 +1,12 @@
+{
+	"type": "process",
+	"name": "0.20mm Daily @LH Stinger",
+	"inherits": "fdm_process_lh_common",
+	"from": "system",
+	"setting_id": "LHS_P_daily",
+	"instantiation": "true",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	]
+}

resources/profiles/LH/process/0.20mm MMU @LH Stinger.json

@@ -0,0 +1,48 @@
+{
+	"type": "process",
+	"name": "0.20mm MMU @LH Stinger",
+	"inherits": "fdm_process_lh_common",
+	"from": "system",
+	"setting_id": "LHS_P_mmu",
+	"instantiation": "true",
+	"compatible_printers": [
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"bottom_surface_pattern": "monotonicline",
+	"bridge_acceleration": "7000",
+	"default_jerk": "10",
+	"detect_narrow_internal_solid_infill": "0",
+	"filter_out_gap_fill": "1",
+	"gap_infill_speed": "220",
+	"infill_jerk": "10",
+	"infill_wall_overlap": "8%",
+	"initial_layer_infill_speed": "120",
+	"initial_layer_jerk": "10",
+	"initial_layer_line_width": "0.4",
+	"inner_wall_acceleration": "15000",
+	"inner_wall_jerk": "10",
+	"inner_wall_speed": "220",
+	"internal_solid_infill_acceleration": "15000",
+	"internal_solid_infill_speed": "220",
+	"only_one_wall_first_layer": "1",
+	"outer_wall_jerk": "10",
+	"outer_wall_speed": "220",
+	"prime_tower_width": "80",
+	"print_extruder_id": [
+		"1"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"raft_first_layer_density": "50%",
+	"small_perimeter_threshold": "2",
+	"sparse_infill_acceleration": "15000",
+	"sparse_infill_pattern": "rectilinear",
+	"sparse_infill_speed": "220",
+	"top_bottom_infill_wall_overlap": "8%",
+	"top_surface_jerk": "10",
+	"top_surface_speed": "150",
+	"wall_generator": "arachne",
+	"sparse_infill_density": "15%",
+	"travel_jerk": "10"
+}

resources/profiles/LH/process/0.20mm PETG @LH Stinger.json

@@ -0,0 +1,74 @@
+{
+	"type": "process",
+	"name": "0.20mm PETG @LH Stinger",
+	"inherits": "fdm_process_lh_common",
+	"from": "system",
+	"setting_id": "LHS_P_petg",
+	"instantiation": "true",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"accel_to_decel_factor": "90%",
+	"bottom_shell_layers": "5",
+	"bridge_acceleration": "3000",
+	"bridge_density": "95%",
+	"bridge_flow": "1.1",
+	"bridge_speed": "30",
+	"brim_ears_max_angle": "180",
+	"brim_object_gap": "0.04",
+	"default_acceleration": "15000",
+	"default_jerk": "10",
+	"filter_out_gap_fill": "1",
+	"gap_infill_speed": "200",
+	"infill_jerk": "10",
+	"infill_wall_overlap": "10%",
+	"initial_layer_infill_speed": "100",
+	"initial_layer_jerk": "10",
+	"initial_layer_print_height": "0.25",
+	"initial_layer_travel_speed": "250",
+	"inner_wall_acceleration": "15000",
+	"inner_wall_speed": "200",
+	"inner_wall_jerk": "10",
+	"inner_wall_line_width": "0.44",
+	"internal_bridge_speed": "50",
+	"internal_solid_infill_acceleration": "15000",
+	"internal_solid_infill_speed": "200",
+	"internal_solid_infill_line_width": "0.44",
+	"line_width": "0.44",
+	"max_travel_detour_distance": "50",
+	"outer_wall_jerk": "10",
+	"outer_wall_line_width": "0.44",
+	"outer_wall_speed": "200",
+	"overhang_1_4_speed": "60%",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "20",
+	"overhang_reverse_internal_only": "1",
+	"overhang_reverse_threshold": "0%",
+	"print_extruder_id": [
+		"1"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"raft_first_layer_density": "60%",
+	"reduce_crossing_wall": "1",
+	"skirt_loops": "2",
+	"slow_down_layers": "2",
+	"small_perimeter_threshold": "10",
+	"sparse_infill_acceleration": "15000",
+	"sparse_infill_speed": "200",
+	"sparse_infill_line_width": "0.44",
+	"support_interface_speed": "200",
+	"support_line_width": "0.42",
+	"support_speed": "200",
+	"top_bottom_infill_wall_overlap": "18%",
+	"top_shell_layers": "6",
+	"top_surface_acceleration": "5000",
+	"top_surface_jerk": "10",
+	"top_surface_speed": "130",
+	"travel_jerk": "10",
+	"wall_loops": "3",
+	"gap_fill_target": "nowhere",
+	"wipe_tower_max_purge_speed": "150"
+}

resources/profiles/LH/process/0.20mm Quiet @LH Stinger.json

@@ -0,0 +1,53 @@
+{
+	"type": "process",
+	"name": "0.20mm Quiet @LH Stinger",
+	"inherits": "fdm_process_lh_common",
+	"from": "system",
+	"setting_id": "LHS_P_quiet",
+	"instantiation": "true",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"accel_to_decel_factor": "75%",
+	"bridge_acceleration": "5000",
+	"bridge_speed": "40",
+	"default_acceleration": "10000",
+	"default_jerk": "5",
+	"filter_out_gap_fill": "10",
+	"gap_infill_speed": "200",
+	"infill_jerk": "5",
+	"infill_wall_overlap": "10%",
+	"initial_layer_infill_speed": "100",
+	"initial_layer_jerk": "5",
+	"initial_layer_travel_speed": "180",
+	"inner_wall_acceleration": "10000",
+	"inner_wall_jerk": "5",
+	"internal_bridge_speed": "60",
+	"internal_solid_infill_acceleration": "10000",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "5",
+	"outer_wall_speed": "200",
+	"print_extruder_id": [
+		"1"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"raft_first_layer_density": "60%",
+	"sparse_infill_acceleration": "10000",
+	"sparse_infill_pattern": "rectilinear",
+	"support_interface_speed": "170",
+	"support_speed": "170",
+	"top_surface_jerk": "5",
+	"top_surface_speed": "200",
+	"inner_wall_speed": "200",
+	"sparse_infill_speed": "200",
+	"internal_solid_infill_speed": "200",
+	"travel_acceleration": "10000",
+	"travel_jerk": "5",
+	"sparse_infill_density": "15%",
+	"accel_to_decel_enable": "1",
+	"gap_fill_target": "nowhere",
+	"travel_speed": "200"
+}

resources/profiles/LH/process/0.20mm Solid @LH Stinger.json

@@ -0,0 +1,64 @@
+{
+	"type": "process",
+	"name": "0.20mm Solid @LH Stinger",
+	"inherits": "fdm_process_lh_common",
+	"from": "system",
+	"setting_id": "LHS_P_solid",
+	"instantiation": "true",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"accel_to_decel_factor": "90%",
+	"bottom_shell_layers": "2",
+	"bridge_acceleration": "5000",
+	"bridge_density": "97%",
+	"brim_object_gap": "0.04",
+	"default_acceleration": "15000",
+	"default_jerk": "10",
+	"detect_narrow_internal_solid_infill": "0",
+	"enable_support": "1",
+	"ensure_vertical_shell_thickness": "none",
+	"filter_out_gap_fill": "2",
+	"gap_infill_speed": "200",
+	"infill_jerk": "10",
+	"infill_wall_overlap": "18%",
+	"initial_layer_jerk": "10",
+	"initial_layer_line_width": "0.45",
+	"initial_layer_print_height": "0.25",
+	"inner_wall_acceleration": "15000",
+	"inner_wall_jerk": "10",
+	"internal_solid_infill_acceleration": "15000",
+	"outer_wall_jerk": "10",
+	"outer_wall_speed": "200",
+	"overhang_1_4_speed": "60%",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "20",
+	"print_extruder_id": [
+		"1"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"raft_first_layer_density": "60%",
+	"small_perimeter_threshold": "7",
+	"sparse_infill_acceleration": "15000",
+	"sparse_infill_density": "98%",
+	"sparse_infill_pattern": "rectilinear",
+	"support_interface_speed": "200",
+	"support_speed": "200",
+	"top_shell_layers": "2",
+	"top_shell_thickness": "0.6",
+	"top_solid_infill_flow_ratio": "0.96",
+	"top_surface_acceleration": "5000",
+	"top_surface_jerk": "10",
+	"top_surface_speed": "150",
+	"inner_wall_speed": "200",
+	"sparse_infill_speed": "200",
+	"internal_solid_infill_speed": "200",
+	"internal_bridge_density": "95%",
+	"internal_bridge_speed": "150",
+	"gap_fill_target": "nowhere",
+	"wall_loops": "3",
+	"travel_jerk": "10"
+}

resources/profiles/LH/process/0.20mm Speed @LH Stinger.json

@@ -0,0 +1,43 @@
+{
+	"type": "process",
+	"name": "0.20mm Speed @LH Stinger",
+	"inherits": "fdm_process_lh_common",
+	"from": "system",
+	"setting_id": "LHS_P_speed",
+	"instantiation": "true",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"bridge_acceleration": "15000",
+	"default_acceleration": "30000",
+	"filter_out_gap_fill": "10",
+	"infill_wall_overlap": "10%",
+	"initial_layer_speed": "90",
+	"inner_wall_acceleration": "30000",
+	"inner_wall_speed": "600",
+	"internal_solid_infill_acceleration": "30000",
+	"internal_solid_infill_speed": "600",
+	"outer_wall_acceleration": "15000",
+	"outer_wall_speed": "600",
+	"print_extruder_id": [
+		"1"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"raft_first_layer_density": "80%",
+	"sparse_infill_acceleration": "30000",
+	"sparse_infill_pattern": "rectilinear",
+	"sparse_infill_speed": "600",
+	"support_bottom_z_distance": "0.15",
+	"support_expansion": "2",
+	"support_interface_top_layers": "3",
+	"support_object_xy_distance": "0.25",
+	"top_surface_acceleration": "15000",
+	"top_surface_speed": "300",
+	"travel_acceleration": "30000",
+	"sparse_infill_density": "15%",
+	"gap_fill_target": "nowhere",
+	"travel_speed": "600"
+}

resources/profiles/LH/process/0.20mm Strength @LH Stinger.json

@@ -0,0 +1,66 @@
+{
+	"type": "process",
+	"name": "0.20mm Strength @LH Stinger",
+	"inherits": "fdm_process_lh_common",
+	"from": "system",
+	"setting_id": "LHS_P_strength",
+	"instantiation": "true",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"accel_to_decel_factor": "90%",
+	"bottom_shell_layers": "5",
+	"bridge_acceleration": "5000",
+	"bridge_flow": "1.4",
+	"brim_object_gap": "0.04",
+	"default_acceleration": "15000",
+	"default_jerk": "10",
+	"filter_out_gap_fill": "1",
+	"gap_infill_speed": "200",
+	"infill_anchor": "1000",
+	"infill_anchor_max": "1000",
+	"infill_jerk": "10",
+	"initial_layer_infill_speed": "120",
+	"initial_layer_jerk": "10",
+	"initial_layer_speed": "90",
+	"initial_layer_travel_speed": "250",
+	"inner_wall_acceleration": "15000",
+	"inner_wall_jerk": "10",
+	"inner_wall_line_width": "0.46",
+	"internal_solid_infill_acceleration": "15000",
+	"internal_solid_infill_line_width": "0.46",
+	"line_width": "0.46",
+	"outer_wall_jerk": "10",
+	"outer_wall_line_width": "0.46",
+	"outer_wall_speed": "200",
+	"overhang_1_4_speed": "60%",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "20",
+	"precise_outer_wall": "0",
+	"print_extruder_id": [
+		"1"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"sparse_infill_acceleration": "15000",
+	"sparse_infill_density": "40%",
+	"sparse_infill_line_width": "0.46",
+	"sparse_infill_pattern": "gyroid",
+	"support_bottom_z_distance": "0.15",
+	"support_interface_speed": "200",
+	"support_line_width": "0.42",
+	"support_speed": "200",
+	"top_shell_layers": "6",
+	"top_shell_thickness": "1",
+	"top_surface_acceleration": "5000",
+	"top_surface_jerk": "10",
+	"top_surface_speed": "200",
+	"inner_wall_speed": "200",
+	"sparse_infill_speed": "200",
+	"internal_solid_infill_speed": "200",
+	"travel_jerk": "10",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_loops": "4"
+}

resources/profiles/LH/process/0.20mm TPU @LH Stinger.json

@@ -0,0 +1,82 @@
+{
+	"type": "process",
+	"name": "0.20mm TPU @LH Stinger",
+	"inherits": "fdm_process_lh_common",
+	"from": "system",
+	"setting_id": "LHS_P_tpu",
+	"instantiation": "true",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"accel_to_decel_factor": "90%",
+	"bridge_acceleration": "5000",
+	"bridge_density": "95%",
+	"bridge_flow": "1.4",
+	"bridge_speed": "40",
+	"brim_ears_max_angle": "180",
+	"brim_object_gap": "0.02",
+	"default_acceleration": "15000",
+	"default_jerk": "5",
+	"elefant_foot_compensation": "0.15",
+	"filter_out_gap_fill": "40",
+	"gap_infill_speed": "200",
+	"infill_jerk": "5",
+	"initial_layer_infill_speed": "70",
+	"initial_layer_jerk": "5",
+	"initial_layer_print_height": "0.25",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "200",
+	"inner_wall_acceleration": "15000",
+	"inner_wall_jerk": "5",
+	"inner_wall_line_width": "0.46",
+	"internal_bridge_flow": "1.2",
+	"internal_bridge_speed": "50",
+	"internal_solid_infill_acceleration": "15000",
+	"internal_solid_infill_line_width": "0.46",
+	"internal_solid_infill_speed": "180",
+	"line_width": "0.46",
+	"max_travel_detour_distance": "50",
+	"outer_wall_jerk": "5",
+	"outer_wall_line_width": "0.46",
+	"outer_wall_speed": "150",
+	"overhang_1_4_speed": "60%",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "20",
+	"print_extruder_id": [
+		"1"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"raft_first_layer_density": "80%",
+	"reduce_crossing_wall": "1",
+	"skirt_loops": "2",
+	"slow_down_layers": "2",
+	"small_perimeter_speed": "60%",
+	"small_perimeter_threshold": "10",
+	"sparse_infill_acceleration": "15000",
+	"sparse_infill_line_width": "0.46",
+	"sparse_infill_speed": "150",
+	"sparse_infill_density": "15%",
+	"staggered_inner_seams": "1",
+	"support_expansion": "2",
+	"support_interface_speed": "200",
+	"support_line_width": "0.42",
+	"support_speed": "200",
+	"top_bottom_infill_wall_overlap": "18%",
+	"top_surface_acceleration": "5000",
+	"top_surface_jerk": "5",
+	"top_surface_line_width": "0.42",
+	"top_surface_speed": "150",
+	"travel_jerk": "10",
+	"wipe_speed": "80",
+	"inner_wall_speed": "200",
+	"ensure_vertical_shell_thickness": "ensure_moderate",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_loops": "3",
+	"gap_fill_target": "nowhere",
+	"reduce_infill_retraction": "1",
+	"infill_wall_overlap": "22%",
+	"wipe_tower_max_purge_speed": "80"
+}

resources/profiles/LH/process/0.25mm Vase Mode @LH Stinger.json

@@ -0,0 +1,70 @@
+{
+	"type": "process",
+	"name": "0.25mm Vase Mode @LH Stinger",
+	"inherits": "fdm_process_lh_common",
+	"from": "system",
+	"setting_id": "LHS_P_vase_mode",
+	"instantiation": "true",
+	"compatible_printers": [
+		"LH Stinger 0.4 nozzle",
+		"LH Stinger MMU 0.4 nozzle"
+	],
+	"accel_to_decel_factor": "90%",
+	"bottom_shell_layers": "5",
+	"bridge_acceleration": "5000",
+	"bridge_flow": "1.4",
+	"brim_object_gap": "0.04",
+	"default_acceleration": "15000",
+	"default_jerk": "10",
+	"filter_out_gap_fill": "1",
+	"gap_infill_speed": "200",
+	"infill_jerk": "10",
+	"infill_wall_overlap": "10%",
+	"initial_layer_jerk": "10",
+	"initial_layer_line_width": "0.65",
+	"initial_layer_print_height": "0.25",
+	"initial_layer_speed": "80",
+	"initial_layer_travel_speed": "250",
+	"inner_wall_acceleration": "15000",
+	"inner_wall_jerk": "10",
+	"inner_wall_line_width": "0.46",
+	"internal_solid_infill_acceleration": "15000",
+	"internal_solid_infill_line_width": "0.46",
+	"layer_height": "0.25",
+	"line_width": "0.46",
+	"notes": "Decrease your Filament - Minimum layer time to ~2 seconds and set your fan speeds to be constant",
+	"outer_wall_jerk": "10",
+	"outer_wall_line_width": "0.65",
+	"outer_wall_speed": "200",
+	"overhang_1_4_speed": "60%",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "20",
+	"print_extruder_id": [
+		"1"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard"
+	],
+	"sparse_infill_acceleration": "15000",
+	"sparse_infill_density": "0%",
+	"sparse_infill_line_width": "0.46",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"spiral_mode": "1",
+	"spiral_mode_smooth": "1",
+	"support_interface_speed": "200",
+	"support_line_width": "0.42",
+	"support_speed": "200",
+	"top_bottom_infill_wall_overlap": "10%",
+	"top_shell_layers": "0",
+	"top_shell_thickness": "1",
+	"top_surface_acceleration": "5000",
+	"top_surface_jerk": "10",
+	"top_surface_speed": "200",
+	"inner_wall_speed": "200",
+	"sparse_infill_speed": "200",
+	"internal_solid_infill_speed": "200",
+	"wall_sequence": "inner wall/outer wall",
+	"travel_jerk": "10",
+	"skirt_loops": "1",
+	"wall_loops": "1"
+}

resources/profiles/LH/process/fdm_process_common.json

@@ -0,0 +1,108 @@
+{
+	"type": "process",
+	"name": "fdm_process_common",
+	"from": "system",
+	"instantiation": "false",
+	"adaptive_layer_height": "0",
+	"reduce_crossing_wall": "0",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_thickness": "0",
+	"bridge_speed": "50",
+	"brim_width": "5",
+	"brim_object_gap": "0.1",
+	"compatible_printers": [],
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "1000",
+	"initial_layer_acceleration": "500",
+	"top_surface_acceleration": "1000",
+	"travel_acceleration": "1000",
+	"inner_wall_acceleration": "1000",
+	"outer_wall_acceleration": "700",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_print_height": "0.2",
+	"infill_combination": "0",
+	"infill_wall_overlap": "25%",
+	"interface_shells": "0",
+	"ironing_flow": "10%",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"slowdown_for_curled_perimeters": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"line_width": "110%",
+	"inner_wall_line_width": "110%",
+	"outer_wall_line_width": "100%",
+	"top_surface_line_width": "93.75%",
+	"sparse_infill_line_width": "110%",
+	"initial_layer_line_width": "120%",
+	"internal_solid_infill_line_width": "120%",
+	"support_line_width": "96%",
+	"wall_loops": "3",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "3",
+	"min_skirt_length": "4",
+	"skirt_loops": "0",
+	"minimum_sparse_infill_area": "15",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_bottom_z_distance": "0.2",
+	"support_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "2",
+	"support_interface_bottom_layers": "2",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "150",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "0.35",
+	"tree_support_branch_angle": "30",
+	"tree_support_wall_count": "0",
+	"tree_support_with_infill": "0",
+	"detect_thin_wall": "0",
+	"top_surface_pattern": "monotonicline",
+	"top_shell_thickness": "0.8",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"layer_height": "0.2",
+	"bottom_shell_layers": "3",
+	"top_shell_layers": "4",
+	"bridge_flow": "1",
+	"initial_layer_speed": "45",
+	"initial_layer_infill_speed": "45",
+	"outer_wall_speed": "45",
+	"inner_wall_speed": "80",
+	"sparse_infill_speed": "150",
+	"internal_solid_infill_speed": "150",
+	"top_surface_speed": "50",
+	"gap_infill_speed": "30",
+	"travel_speed": "200"
+}

resources/profiles/LH/process/fdm_process_lh_common.json

@@ -0,0 +1,109 @@
+{
+	"type": "process",
+	"name": "fdm_process_lh_common",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"instantiation": "false",
+	"exclude_object": "1",
+	"accel_to_decel_enable": "0",
+	"bottom_shell_layers": "4",
+	"bridge_acceleration": "10000",
+	"bridge_density": "100%",
+	"brim_object_gap": "0.05",
+	"brim_width": "4",
+	"default_acceleration": "20000",
+	"dont_filter_internal_bridges": "limited",
+	"elefant_foot_compensation": "0.05",
+	"ensure_vertical_shell_thickness": "ensure_critical_only",
+	"filter_out_gap_fill": "1",
+	"gap_fill_target": "everywhere",
+	"gap_infill_speed": "400",
+	"independent_support_layer_height": "0",
+	"infill_jerk": "15",
+	"infill_wall_overlap": "15%",
+	"top_bottom_infill_wall_overlap": "22%",
+	"initial_layer_acceleration": "600",
+	"initial_layer_infill_speed": "140",
+	"initial_layer_jerk": "15",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_speed": "60",
+	"initial_layer_travel_speed": "300",
+	"inner_wall_acceleration": "20000",
+	"inner_wall_jerk": "15",
+	"inner_wall_line_width": "0.4",
+	"inner_wall_speed": "400",
+	"internal_bridge_speed": "70",
+	"internal_solid_infill_acceleration": "20000",
+	"internal_solid_infill_line_width": "0.4",
+	"internal_solid_infill_speed": "400",
+	"ironing_flow": "19%",
+	"ironing_inset": "0.3",
+	"ironing_speed": "50",
+	"line_width": "0.4",
+	"min_bead_width": "75%",
+	"min_feature_size": "20%",
+	"min_length_factor": "1.5",
+	"min_width_top_surface": "200%",
+	"only_one_wall_top": "1",
+	"outer_wall_acceleration": "10000",
+	"outer_wall_jerk": "15",
+	"outer_wall_line_width": "0.4",
+	"outer_wall_speed": "400",
+	"overhang_1_4_speed": "70%",
+	"overhang_4_4_speed": "15",
+	"prime_tower_brim_width": "2",
+	"prime_tower_width": "80",
+	"prime_volume": "75",
+	"raft_first_layer_density": "70%",
+	"reduce_infill_retraction": "0",
+	"resolution": "0.01",
+	"role_based_wipe_speed": "0",
+	"seam_gap": "0",
+	"skirt_distance": "8",
+	"skirt_height": "1",
+	"skirt_speed": "100",
+	"skirt_start_angle": "-25",
+	"slice_closing_radius": "0.04",
+	"slowdown_for_curled_perimeters": "0",
+	"sparse_infill_acceleration": "20000",
+	"sparse_infill_density": "20%",
+	"sparse_infill_line_width": "0.4",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "400",
+	"support_angle": "135",
+	"support_base_pattern_spacing": "2",
+	"support_expansion": "1",
+	"support_interface_spacing": "0.3",
+	"support_interface_speed": "400",
+	"support_line_width": "0.4",
+	"support_object_xy_distance": "0.2",
+	"support_on_build_plate_only": "1",
+	"support_speed": "400",
+	"support_style": "snug",
+	"support_top_z_distance": "0.15",
+	"thick_internal_bridges": "0",
+	"top_shell_layers": "5",
+	"top_surface_acceleration": "10000",
+	"top_surface_jerk": "15",
+	"top_surface_line_width": "0.4",
+	"top_surface_speed": "250",
+	"travel_acceleration": "20000",
+	"travel_jerk": "15",
+	"travel_speed": "400",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "outer wall/inner wall",
+	"wipe_speed": "150",
+	"wipe_tower_bridging": "15",
+	"wipe_tower_extra_flow": "120%",
+	"wipe_tower_max_purge_speed": "200",
+	"enable_prime_tower": "1",
+	"precise_outer_wall": "0",
+	"print_extruder_id": [
+		"1"
+	],
+	"brim_type": "auto_brim",
+	"print_extruder_variant": [
+		"Direct Drive Standard"
+	]
+}

scripts/orca_filament_lib.py

@@ -132,6 +132,7 @@ def update_profile_library(vendor="",profile_type="filament"):
                 library[profile_section] = sorted_profiles
                 f.seek(0)
                 json.dump(library, f, indent="\t", ensure_ascii=False)
+                f.write('\n')
                 f.truncate()
                 
             print(f"Profile library for {vendor} updated successfully!")
@@ -230,6 +231,7 @@ def clean_up_profile(vendor="", profile_type="", force=False):
                                 f.seek(0)
                                 ordered_profile = create_ordered_profile(_profile, ['type', 'name', 'renamed_from', 'inherits', 'from', 'setting_id', 'filament_id', 'instantiation'])
                                 json.dump(ordered_profile, f, indent="\t", ensure_ascii=False)
+                                f.write('\n')
                                 f.truncate()
                                 print(f"Updated profile: {full_path}")
                     except Exception as e:
@@ -274,6 +276,7 @@ def rename_filament_system(vendor="OrcaFilamentLibrary"):
                         if modified:
                             with open(full_path, 'w', encoding='utf-8') as f:
                                 json.dump(data, f, indent="\t", ensure_ascii=False)
+                                f.write('\n')
                             print(f"Updated {full_path}")
                             
                 except Exception as e:

src/libslic3r/AABBTreeLines.hpp

@@ -161,10 +161,11 @@ namespace AABBTreeLines {
     // on centroids of the lines.
     // Epsilon is applied to the bounding boxes of the AABB Tree to cope with numeric inaccuracies
     // during tree traversal.
-    template <typename LineType>
-    inline AABBTreeIndirect::Tree<2, typename LineType::Scalar> build_aabb_tree_over_indexed_lines(const std::vector<LineType>& lines)
+    template<typename LineType>
+    inline AABBTreeIndirect::Tree<LineType::Dim, typename LineType::Scalar> build_aabb_tree_over_indexed_lines(
+        const std::vector<LineType>& lines)
     {
-        using TreeType = AABBTreeIndirect::Tree<2, typename LineType::Scalar>;
+        using TreeType = AABBTreeIndirect::Tree<LineType::Dim, typename LineType::Scalar>;
         //    using              CoordType      = typename TreeType::CoordType;
         using VectorType = typename TreeType::VectorType;
         using BoundingBox = typename TreeType::BoundingBox;
@@ -303,7 +304,7 @@ namespace AABBTreeLines {
 
     private:
         std::vector<LineType> lines;
-        AABBTreeIndirect::Tree<2, Scalar> tree;
+        AABBTreeIndirect::Tree<LineType::Dim, Scalar> tree;
 
     public:
         explicit LinesDistancer(const std::vector<LineType>& lines)
@@ -321,15 +322,15 @@ namespace AABBTreeLines {
         LinesDistancer() = default;
 
         // 1 true, -1 false, 0 cannot determine
-        int outside(const Vec<2, Scalar>& point) const { return point_outside_closed_contours(lines, tree, point); }
+        int outside(const Vec<LineType::Dim, Scalar>& point) const { return point_outside_closed_contours(lines, tree, point); }
 
         // negative sign means inside
-        template <bool SIGNED_DISTANCE>
-        std::tuple<Floating, size_t, Vec<2, Floating>> distance_from_lines_extra(const Vec<2, Scalar>& point) const
+        template<bool SIGNED_DISTANCE>
+        std::tuple<Floating, size_t, Vec<LineType::Dim, Floating>> distance_from_lines_extra(const Vec<LineType::Dim, Scalar>& point) const
         {
             size_t nearest_line_index_out = size_t(-1);
-            Vec<2, Floating> nearest_point_out = Vec<2, Floating>::Zero();
-            Vec<2, Floating> p = point.template cast<Floating>();
+            Vec<LineType::Dim, Floating> nearest_point_out      = Vec<LineType::Dim, Floating>::Zero();
+            Vec<LineType::Dim, Floating> p                      = point.template cast<Floating>();
             auto distance = AABBTreeLines::squared_distance_to_indexed_lines(lines, tree, p, nearest_line_index_out, nearest_point_out);
 
             if (distance < 0) {
@@ -344,22 +345,20 @@ namespace AABBTreeLines {
             return { distance, nearest_line_index_out, nearest_point_out };
         }
 
-        template <bool SIGNED_DISTANCE>
-        Floating distance_from_lines(const Vec<2, typename LineType::Scalar>& point) const
+        template<bool SIGNED_DISTANCE> Floating distance_from_lines(const Vec<LineType::Dim, typename LineType::Scalar>& point) const
         {
             auto [dist, idx, np] = distance_from_lines_extra<SIGNED_DISTANCE>(point);
             return dist;
         }
 
-    	std::vector<size_t> all_lines_in_radius(const Vec<2, Scalar> &point, Floating radius)
-    	{
-        	return AABBTreeLines::all_lines_in_radius(this->lines, this->tree, point.template cast<Floating>(), radius * radius);
-    	}
-
-        template <bool sorted>
-        std::vector<std::pair<Vec<2, Scalar>, size_t>> intersections_with_line(const LineType& line) const
+        std::vector<size_t> all_lines_in_radius(const Vec<LineType::Dim, Scalar>& point, Floating radius)
         {
-            return get_intersections_with_line<sorted, Vec<2, Scalar>>(lines, tree, line);
+            return AABBTreeLines::all_lines_in_radius(this->lines, this->tree, point.template cast<Floating>(), radius * radius);
+        }
+
+        template<bool sorted> std::vector<std::pair<Vec<LineType::Dim, Scalar>, size_t>> intersections_with_line(const LineType& line) const
+        {
+            return get_intersections_with_line<sorted, Vec<LineType::Dim, Scalar>>(lines, tree, line);
         }
 
         const LineType& get_line(size_t line_idx) const { return lines[line_idx]; }

src/libslic3r/BoundingBox.hpp

@@ -236,7 +236,18 @@ class BoundingBox3  : public BoundingBox3Base<Vec3crd>
 public:
     BoundingBox3() : BoundingBox3Base<Vec3crd>() {}
     BoundingBox3(const Vec3crd &pmin, const Vec3crd &pmax) : BoundingBox3Base<Vec3crd>(pmin, pmax) {}
-    BoundingBox3(const Points3& points) : BoundingBox3Base<Vec3crd>(points) {}
+    BoundingBox3(const Points3& points) : BoundingBox3Base<Vec3crd>() {
+        if (!points.empty()) {
+            this->min = points.front();
+            this->max = points.front();
+            for (const auto &p : points) {
+                this->min = this->min.cwiseMin(static_cast<const Vec3crd&>(p));
+                this->max = this->max.cwiseMax(static_cast<const Vec3crd&>(p));
+            }
+            this->defined = true;
+        }
+    }
+    BoundingBox3(const std::vector<Vec3crd>& points) : BoundingBox3Base<Vec3crd>(points) {}
 };
 
 class BoundingBoxf : public BoundingBoxBase<Vec2d> 

src/libslic3r/CMakeLists.txt

@@ -100,6 +100,7 @@ set(lisbslic3r_sources
     CommonDefs.hpp
     Config.cpp
     Config.hpp
+    ContourZ.cpp
     CustomGCode.cpp
     CustomGCode.hpp
     CutUtils.cpp

src/libslic3r/Circle.cpp

@@ -3,6 +3,7 @@
 #include <cmath>
 #include <cassert>
 #include "Geometry.hpp"
+#include "Polygon.hpp"
 
 
 //BBS: Refer to ArcWelderLib for the arc fitting functions
@@ -94,6 +95,12 @@ bool Circle::try_create_circle(const Points& points, const double max_radius, co
     return found_circle;
 }
 
+bool Circle::try_create_circle(const Points3& points, const double max_radius, const double tolerance, Circle& new_circle)
+{
+    return Circle::try_create_circle(to_points(points), max_radius, tolerance, new_circle);
+}
+
+
 double Circle::get_polar_radians(const Point& p1) const
 {
     double polar_radians = atan2(p1.y() - center.y(), p1.x() - center.x());
@@ -291,6 +298,31 @@ bool ArcSegment::try_create_arc(
     return false;
 }
 
+bool ArcSegment::try_create_arc(
+    const Points3& points,
+    ArcSegment& target_arc,
+    double approximate_length,
+    double max_radius,
+    double tolerance,
+    double path_tolerance_percent)
+{
+    Circle test_circle = (Circle)target_arc;
+    if (!Circle::try_create_circle(points, max_radius, tolerance, test_circle))
+        return false;
+
+    int mid_point_index = ((points.size() - 2) / 2) + 1;
+    ArcSegment test_arc;
+    if (!ArcSegment::try_create_arc(test_circle, points[0].to_point(), points[mid_point_index].to_point(), points[points.size() - 1].to_point(), test_arc, approximate_length, path_tolerance_percent))
+        return false;
+
+    if (ArcSegment::are_points_within_slice(test_arc, points))
+    {
+        target_arc = test_arc;
+        return true;
+    }
+    return false;
+}
+
 bool ArcSegment::try_create_arc(
     const Circle& c,
     const Point& start_point,
@@ -455,6 +487,87 @@ bool ArcSegment::are_points_within_slice(const ArcSegment& test_arc, const Point
     return true;
 }
 
+bool ArcSegment::are_points_within_slice(const ArcSegment& test_arc, const Points3& points)
+{
+    //BBS: Check all the points and see if they fit inside of the angles
+    double previous_polar = test_arc.polar_start_theta;
+    bool will_cross_zero = false;
+    bool crossed_zero = false;
+    const int point_count = points.size();
+
+    Vec2d start_norm(((double)test_arc.start_point.x() - (double)test_arc.center.x()) / test_arc.radius,
+                     ((double)test_arc.start_point.y() - (double)test_arc.center.y()) / test_arc.radius);
+    Vec2d end_norm(((double)test_arc.end_point.x() - (double)test_arc.center.x()) / test_arc.radius,
+                   ((double)test_arc.end_point.y() - (double)test_arc.center.y()) / test_arc.radius);
+
+    if (test_arc.direction == ArcDirection::Arc_Dir_CCW)
+        will_cross_zero = test_arc.polar_start_theta > test_arc.polar_end_theta;
+    else
+        will_cross_zero = test_arc.polar_start_theta < test_arc.polar_end_theta;
+
+    //BBS: check if point 1 to point 2 cross zero
+    double polar_test;
+    for (int index = point_count - 2; index < point_count; index++)
+    {
+        if (index < point_count - 1)
+          polar_test = test_arc.get_polar_radians(points[index].to_point());
+        else
+          polar_test = test_arc.polar_end_theta;
+
+        //BBS: First ensure the test point is within the arc
+        if (test_arc.direction == ArcDirection::Arc_Dir_CCW)
+        {
+            //BBS: Only check to see if we are within the arc if this isn't the endpoint
+            if (index < point_count - 1) {
+                if (will_cross_zero) {
+                    if (!(polar_test > test_arc.polar_start_theta || polar_test < test_arc.polar_end_theta))
+                        return false;
+                } else if (!(test_arc.polar_start_theta < polar_test && polar_test < test_arc.polar_end_theta))
+                    return false;
+            }
+            //BBS: check the angles are increasing
+            if (previous_polar > polar_test) {
+                if (!will_cross_zero)
+                    return false;
+
+                //BBS: Allow the angle to cross zero once
+                if (crossed_zero)
+                    return false;
+                crossed_zero = true;
+            }
+        } else {
+            if (index < point_count - 1) {
+                if (will_cross_zero) {
+                    if (!(polar_test < test_arc.polar_start_theta || polar_test > test_arc.polar_end_theta))
+                        return false;
+                } else if (!(test_arc.polar_start_theta > polar_test && polar_test > test_arc.polar_end_theta))
+                    return false;
+            }
+            //BBS: Now make sure the angles are decreasing
+            if (previous_polar < polar_test)
+            {
+                if (!will_cross_zero)
+                    return false;
+                //BBS: Allow the angle to cross zero once
+                if (crossed_zero)
+                    return false;
+                crossed_zero = true;
+            }
+        }
+
+        // BBS: check if the segment intersects either of the vector from the center of the circle to the endpoints of the arc
+        Line segmemt(points[index - 1].to_point(), points[index].to_point());
+        if ((index != 1 && ray_intersects_segment(test_arc.center, start_norm, segmemt)) ||
+            (index != point_count - 1 && ray_intersects_segment(test_arc.center, end_norm, segmemt)))
+            return false;
+        previous_polar = polar_test;
+    }
+    //BBS: Ensure that all arcs that cross zero
+    if (will_cross_zero != crossed_zero)
+        return false;
+    return true;
+}
+
 // BBS: this function is used to detect whether a ray cross the segment
 bool ArcSegment::ray_intersects_segment(const Point &rayOrigin, const Vec2d &rayDirection, const Line& segment)
 {

src/libslic3r/Circle.hpp

@@ -28,6 +28,7 @@ public:
 
     static bool try_create_circle(const Point &p1, const Point &p2, const Point &p3, const double max_radius, Circle& new_circle);
     static bool try_create_circle(const Points& points, const double max_radius, const double tolerance, Circle& new_circle);
+    static bool try_create_circle(const Points3& points, const double max_radius, const double tolerance, Circle& new_circle);
     double get_polar_radians(const Point& p1) const;
     bool is_over_deviation(const Points& points, const double tolerance);
     bool get_deviation_sum_squared(const Points& points, const double tolerance, double& sum_deviation);
@@ -111,8 +112,16 @@ public:
         double max_radius = DEFAULT_SCALED_MAX_RADIUS,
         double tolerance = DEFAULT_SCALED_RESOLUTION,
         double path_tolerance_percent = DEFAULT_ARC_LENGTH_PERCENT_TOLERANCE);
+    static bool try_create_arc(
+        const Points3 &points,
+        ArcSegment& target_arc,
+        double approximate_length,
+        double max_radius = DEFAULT_SCALED_MAX_RADIUS,
+        double tolerance = DEFAULT_SCALED_RESOLUTION,
+        double path_tolerance_percent = DEFAULT_ARC_LENGTH_PERCENT_TOLERANCE);
 
     static bool are_points_within_slice(const ArcSegment& test_arc, const Points &points);
+    static bool are_points_within_slice(const ArcSegment& test_arc, const Points3 &points);
     // BBS: this function is used to detect whether a ray cross the segment
     static bool ray_intersects_segment(const Point& rayOrigin, const Vec2d& rayDirection, const Line& segment);
     // BBS: these three functions are used to calculate related arguments of arc in unscale_field.

src/libslic3r/ClipperUtils.cpp

@@ -411,6 +411,19 @@ Slic3r::ExPolygons offset_ex(const Slic3r::Polygons &polygons, const float delta
 
 Slic3r::Polygons offset(const Slic3r::Polyline &polyline, const float delta, ClipperLib::JoinType joinType, double miterLimit, ClipperLib::EndType end_type)
     { assert(delta > 0); return to_polygons(clipper_union<ClipperLib::Paths>(raw_offset_polyline(ClipperUtils::SinglePathProvider(polyline.points), delta, joinType, miterLimit, end_type))); }
+
+Slic3r::Polygons offset(const Slic3r::Polyline3 &polyline, const float delta, ClipperLib::JoinType joinType, double miterLimit, ClipperLib::EndType end_type)
+{
+    assert(delta > 0);
+    return to_polygons(
+        clipper_union<ClipperLib::Paths>(
+            raw_offset_polyline(
+                ClipperUtils::SinglePathProvider(polyline.to_polyline().points),
+                delta,
+                joinType,
+                miterLimit,
+                end_type)));
+}
 Slic3r::Polygons offset(const Slic3r::Polylines &polylines, const float delta, ClipperLib::JoinType joinType, double miterLimit, ClipperLib::EndType end_type)
     { assert(delta > 0); return to_polygons(clipper_union<ClipperLib::Paths>(raw_offset_polyline(ClipperUtils::PolylinesProvider(polylines), delta, joinType, miterLimit, end_type))); }
 

src/libslic3r/ClipperUtils.hpp

@@ -334,6 +334,7 @@ Slic3r::Polygons offset(const Slic3r::Polygon &polygon, const float delta, Clipp
 // Wherever applicable, please use the expand() / shrink() variants instead, they convey their purpose better.
 // Input polygons for negative offset shall be "normalized": There must be no overlap / intersections between the input polygons.
 Slic3r::Polygons   offset(const Slic3r::Polyline &polyline, const float delta, ClipperLib::JoinType joinType = DefaultLineJoinType, double miterLimit = DefaultLineMiterLimit, ClipperLib::EndType end_type = DefaultEndType);
+Slic3r::Polygons   offset(const Slic3r::Polyline3 &polyline, const float delta, ClipperLib::JoinType joinType = DefaultLineJoinType, double miterLimit = DefaultLineMiterLimit, ClipperLib::EndType end_type = DefaultEndType);
 Slic3r::Polygons   offset(const Slic3r::Polylines &polylines, const float delta, ClipperLib::JoinType joinType = DefaultLineJoinType, double miterLimit = DefaultLineMiterLimit, ClipperLib::EndType end_type = DefaultEndType);
 Slic3r::Polygons   offset(const Slic3r::Polygons &polygons, const float delta, ClipperLib::JoinType joinType = DefaultJoinType, double miterLimit = DefaultMiterLimit);
 Slic3r::Polygons   offset(const Slic3r::ExPolygon &expolygon, const float delta, ClipperLib::JoinType joinType = DefaultJoinType, double miterLimit = DefaultMiterLimit);
@@ -524,6 +525,8 @@ Slic3r::Polylines  intersection_pl(const Slic3r::Polyline &subject, const Slic3r
 Slic3r::Polylines  intersection_pl(const Slic3r::Polylines &subject, const Slic3r::Polygons &clip);
 Slic3r::Polylines  intersection_pl(const Slic3r::Polylines &subject, const Slic3r::ExPolygons &clip);
 Slic3r::Polylines  intersection_pl(const Slic3r::Polygons &subject, const Slic3r::Polygons &clip);
+Slic3r::Polylines3 intersection_pl(const Slic3r::Polylines3 &subject, const Slic3r::Polygon &clip);
+Slic3r::Polylines3 intersection_pl(const Slic3r::Polylines3 &subject, const Slic3r::ExPolygon &clip);
 
 inline Slic3r::Lines intersection_ln(const Slic3r::Lines &subject, const Slic3r::Polygons &clip)
 {

src/libslic3r/ContourZ.cpp

@@ -0,0 +1,236 @@
+#include "Exception.hpp"
+#include "ExtrusionEntity.hpp"
+#include "ExtrusionEntityCollection.hpp"
+#include "Layer.hpp"
+#include "Point.hpp"
+#include "Print.hpp"
+#include "SLA/IndexedMesh.hpp"
+#include "libslic3r.h"
+#include <cfloat>
+#include <cmath>
+#include <initializer_list>
+#include <string>
+
+namespace Slic3r {
+
+static void contour_extrusion_entity(LayerRegion *region, const sla::IndexedMesh &mesh, ExtrusionEntity *extr);
+
+static double follow_slope_down(double angle_rad, double dist)
+{
+	return -dist * std::sin(angle_rad);
+}
+
+static double slope_from_normal(const Eigen::Vector3d& normal)
+{
+    // Ensure the normal is normalized
+    Eigen::Vector3d n = normal.normalized();
+
+    // Compute angle between normal and z-axis
+    double angle_rad = std::acos(std::abs(n.z()));  // angle between normal and vertical
+	return angle_rad;
+}
+
+static bool contour_extrusion_path(LayerRegion *region, const sla::IndexedMesh &mesh, ExtrusionPath &path)
+{
+    if (path.role() != erTopSolidInfill && path.role() != erIroning && path.role() != erExternalPerimeter && path.role() != erPerimeter) {
+		return false;
+	}
+	
+	Layer *layer = region->layer();
+	coordf_t mesh_z = layer->print_z + mesh.ground_level();
+	coordf_t min_z = region->region().config().zaa_min_z;
+
+	const Points3 &points = path.polyline.points;
+	double resolution_mm = 0.1;
+
+	coordf_t height = layer->height;
+
+	double minimize_perimeter_height_angle = region->region().config().zaa_minimize_perimeter_height;
+
+	Pointf3s contoured_points;
+	bool was_contoured = false;
+
+	for (Points3::const_iterator it = points.begin(); it != points.end()-1; ++it) {
+		Vec2d p1d(unscale_(it->x()), unscale_(it->y()));
+		Vec2d p2d(unscale_((it+1)->x()), unscale_((it+1)->y()));
+		Linef line(p1d, p2d);
+
+		double length_mm = line.length();
+		int num_segments = int(std::ceil(length_mm / resolution_mm));
+		Vec2d delta = line.vector();
+
+        if (num_segments == 0) {
+            continue;
+        }
+
+        for (int i = 0; i < num_segments + 1; i++) {
+            Vec2d p = p1d + delta * i / num_segments;
+
+            coordf_t x = p.x();
+			coordf_t y = p.y();
+
+			sla::IndexedMesh::hit_result hit_up = mesh.query_ray_hit({x, y, mesh_z}, {0.0, 0.0, 1.0});
+			sla::IndexedMesh::hit_result hit_down = mesh.query_ray_hit({x, y, mesh_z}, {0.0, 0.0, -1.0});
+
+			double up = hit_up.distance();
+			double down = hit_down.distance();
+			double d = up < down ? up : -down;
+			const Vec3d &normal = (up < down ? hit_up : hit_down).normal();
+			
+			double max_up = min_z;
+			double min_down = -(height - min_z);
+			double half_width = path.width / 2.0;
+			if (path.role() == erIroning) {
+				max_up = height;
+				min_down = -(height + 0.1);
+			}
+
+            if (is_perimeter(path.role())) {
+                double slope_rad     = slope_from_normal(normal);
+                double slope_degrees = slope_rad * 180.0 / M_PI;
+
+                if (d > min_down && minimize_perimeter_height_angle > 0 && minimize_perimeter_height_angle < slope_degrees) {
+                    double adjustment = follow_slope_down(slope_rad, half_width);
+                    if (adjustment > 0) {
+                        throw RuntimeError("ContourZ: got positive adjustment");
+                    }
+                    d += adjustment;
+                    if (d < min_down) {
+                        d = min_down;
+                    }
+                }
+            }
+
+            if (d < -height || d > max_up + 0.03) {
+                // this point is too far from the mesh edge, probably because this is not a top surface. Do not contour it.
+                d = 0;
+            }
+
+            if (d < min_down) {
+                d = min_down;
+            } else if (d > max_up) {
+                d = max_up;
+            }
+
+            if (is_perimeter(path.role()) && d > 0) {
+                // do not increase height of perimeters as this may create an appearance of a seam
+                d = 0;
+            }
+
+            if (std::abs(d) > EPSILON) {
+				was_contoured = true;
+			}
+
+            Vec3d new_point = {p.x(), p.y(), d};
+
+            if (contoured_points.size() >= 2) {
+                double dist = Linef3::distance_to_infinite_squared(new_point, contoured_points[contoured_points.size() - 2],
+                                                                   contoured_points[contoured_points.size() - 1]);
+                if (dist < EPSILON * EPSILON) {
+                    contoured_points[contoured_points.size() - 1] = new_point;
+                    continue;
+                }
+            }
+
+            contoured_points.push_back(new_point);
+        }
+    }
+
+    if (!was_contoured) {
+		return false;
+	}
+
+	Polyline3 polyline;
+	for (const Vec3d &point : contoured_points) {
+		polyline.append(Point3(scale_(point.x()), scale_(point.y()), scale_(point.z())));
+	}
+
+	path.polyline = std::move(polyline);
+	path.z_contoured = true;
+	return true;
+}
+
+static void contour_extrusion_multipath(LayerRegion *region, const sla::IndexedMesh &mesh, ExtrusionMultiPath &multipath) 
+{
+	for (ExtrusionPath &path : multipath.paths) {
+		contour_extrusion_path(region, mesh, path);
+	}
+}
+
+static void contour_extrusion_loop(LayerRegion *region, const sla::IndexedMesh &mesh, ExtrusionLoop &loop) 
+{
+	for (ExtrusionPath &path : loop.paths) {
+		contour_extrusion_path(region, mesh, path);
+	}
+}
+
+static void contour_extrusion_entitiy_collection(LayerRegion *region, const sla::IndexedMesh &mesh, ExtrusionEntityCollection &collection)
+{
+	for (ExtrusionEntity *entity : collection.entities) {
+		contour_extrusion_entity(region, mesh, entity);
+	}
+}
+
+static void contour_extrusion_entity(LayerRegion *region, const sla::IndexedMesh &mesh, ExtrusionEntity *extr)
+{
+	const ExtrusionPathSloped *sloped = dynamic_cast<const ExtrusionPathSloped*>(extr);
+	if (sloped != nullptr) {
+		throw RuntimeError("ExtrusionPathSloped not implemented");
+		return;
+	}
+
+	ExtrusionMultiPath *multipath = dynamic_cast<ExtrusionMultiPath*>(extr);
+	if (multipath != nullptr) {
+		contour_extrusion_multipath(region, mesh, *multipath);
+		return;
+	}
+
+	ExtrusionPath *path = dynamic_cast<ExtrusionPath*>(extr);
+	if (path != nullptr) {
+		contour_extrusion_path(region, mesh, *path);
+		return;
+	}
+
+	ExtrusionLoop *loop = dynamic_cast<ExtrusionLoop*>(extr);
+	if (loop != nullptr) {
+		contour_extrusion_loop(region, mesh, *loop);
+		return;
+	}
+
+	const ExtrusionLoopSloped *loop_sloped = dynamic_cast<const ExtrusionLoopSloped*>(extr);
+	if (loop_sloped != nullptr) {
+		throw RuntimeError("ExtrusionLoopSloped not implemented");
+		return;
+	}
+
+	ExtrusionEntityCollection *collection = dynamic_cast<ExtrusionEntityCollection*>(extr);
+	if (collection != nullptr) {
+		contour_extrusion_entitiy_collection(region, mesh, *collection);
+		return;
+	}
+
+	throw RuntimeError("ContourZ: ExtrusionEntity type not implemented: " + std::string(typeid(*extr).name()));
+	return;
+}
+
+static void handle_extrusion_collection(LayerRegion *region, const sla::IndexedMesh &mesh, ExtrusionEntityCollection &collection, std::initializer_list<ExtrusionRole> roles) {
+    for (ExtrusionEntity* extr : collection.entities) {
+        if (!contains(roles, extr->role())) {
+			continue;
+		}
+
+		contour_extrusion_entity(region, mesh, extr);
+    }
+}
+
+void Layer::make_contour_z(const sla::IndexedMesh &mesh)
+{
+	for (LayerRegion *region : this->regions()) {
+        if (!region->region().config().zaa_enabled)
+            continue;
+
+        handle_extrusion_collection(region, mesh, region->fills, {erTopSolidInfill, erIroning, erPerimeter, erExternalPerimeter, erMixed});
+        handle_extrusion_collection(region, mesh, region->perimeters, {erPerimeter, erExternalPerimeter, erMixed});
+    }
+}
+} // namespace Slic3r

src/libslic3r/ExPolygon.hpp

@@ -192,6 +192,25 @@ inline Linesf to_unscaled_linesf(const ExPolygons &src)
     return lines;
 }
 
+inline Linesf3 to_unscaled_linesf3(const ExPolygons& src)
+{
+    Linesf3 lines;
+    lines.reserve(count_points(src));
+    for (ExPolygons::const_iterator it_expoly = src.begin(); it_expoly != src.end(); ++it_expoly) {
+        for (size_t i = 0; i <= it_expoly->holes.size(); ++i) {
+            const Points& points     = ((i == 0) ? it_expoly->contour : it_expoly->holes[i - 1]).points;
+            Vec2d         unscaled_a = unscaled(points.front());
+            Vec2d         unscaled_b = unscaled_a;
+            for (Points::const_iterator it = points.begin() + 1; it != points.end(); ++it) {
+                unscaled_b = unscaled(*(it));
+                lines.push_back(Linef3(unscaled_a, unscaled_b, 0));
+                unscaled_a = unscaled_b;
+            }
+            lines.push_back(Linef3(unscaled_a, unscaled(points.front()), 0));
+        }
+    }
+    return lines;
+}
 
 inline Points to_points(const ExPolygons &src)
 {

src/libslic3r/ExtrusionEntity.cpp

@@ -17,12 +17,12 @@ static const double slope_inner_outer_wall_gap = 0.4;
 
 void ExtrusionPath::intersect_expolygons(const ExPolygons &collection, ExtrusionEntityCollection* retval) const
 {
-    this->_inflate_collection(intersection_pl(Polylines{ polyline }, collection), retval);
+    this->_inflate_collection(intersection_pl(Polylines{ polyline.to_polyline() }, collection), retval);
 }
 
 void ExtrusionPath::subtract_expolygons(const ExPolygons &collection, ExtrusionEntityCollection* retval) const
 {
-    this->_inflate_collection(diff_pl(Polylines{ this->polyline }, collection), retval);
+    this->_inflate_collection(diff_pl(Polylines{ this->polyline.to_polyline() }, collection), retval);
 }
 
 void ExtrusionPath::clip_end(double distance)
@@ -32,11 +32,17 @@ void ExtrusionPath::clip_end(double distance)
 
 void ExtrusionPath::simplify(double tolerance)
 {
+    if (this->z_contoured) {
+        return;
+    }
     this->polyline.simplify(tolerance);
 }
 
 void ExtrusionPath::simplify_by_fitting_arc(double tolerance)
 {
+    if (this->z_contoured) {
+        return;
+    }
     this->polyline.simplify_by_fitting_arc(tolerance);
 }
 
@@ -45,15 +51,23 @@ double ExtrusionPath::length() const
     return this->polyline.length();
 }
 
+void ExtrusionPath::collect_points(Points &dst) const
+{
+    dst.reserve(dst.size() + this->polyline.points.size());
+    for (const Point3 &point : this->polyline.points) {
+        dst.emplace_back(point.x(), point.y());
+    }
+}
+
 void ExtrusionPath::_inflate_collection(const Polylines &polylines, ExtrusionEntityCollection* collection) const
 {
     for (const Polyline &polyline : polylines)
-        collection->entities.emplace_back(new ExtrusionPath(polyline, *this));
+        collection->entities.emplace_back(new ExtrusionPath(Polyline3(polyline), *this));
 }
 
 void ExtrusionPath::polygons_covered_by_width(Polygons &out, const float scaled_epsilon) const
 {
-    polygons_append(out, offset(this->polyline, float(scale_(this->width/2)) + scaled_epsilon));
+    polygons_append(out, offset(this->polyline.to_polyline(), float(scale_(this->width/2)) + scaled_epsilon));
 }
 
 void ExtrusionPath::polygons_covered_by_spacing(Polygons &out, const float scaled_epsilon) const
@@ -64,7 +78,7 @@ void ExtrusionPath::polygons_covered_by_spacing(Polygons &out, const float scale
     // SoftFever: TODO Mac trigger assersion errors
 //    assert(! bridge || this->width == this->height);
     auto flow = bridge ? Flow::bridging_flow(this->width, 0.f) : Flow(this->width, this->height, 0.f);
-    polygons_append(out, offset(this->polyline, 0.5f * float(flow.scaled_spacing()) + scaled_epsilon));
+    polygons_append(out, offset(this->polyline.to_polyline(), 0.5f * float(flow.scaled_spacing()) + scaled_epsilon));
 }
 
 void ExtrusionMultiPath::reverse()
@@ -116,9 +130,10 @@ Polyline ExtrusionMultiPath::as_polyline() const
         len -= paths.size() - 1;
         assert(len > 0);
         out.points.reserve(len);
-        out.points.push_back(paths.front().polyline.points.front());
+        out.points.push_back(paths.front().polyline.points.front().to_point());
         for (size_t i_path = 0; i_path < paths.size(); ++ i_path)
-            out.points.insert(out.points.end(), paths[i_path].polyline.points.begin() + 1, paths[i_path].polyline.points.end());
+            for (auto it = paths[i_path].polyline.points.begin() + 1; it != paths[i_path].polyline.points.end(); ++it)
+                out.points.push_back(it->to_point());
     }
     return out;
 }
@@ -149,7 +164,9 @@ Polygon ExtrusionLoop::polygon() const
     Polygon polygon;
     for (const ExtrusionPath &path : this->paths) {
         // for each polyline, append all points except the last one (because it coincides with the first one of the next polyline)
-        polygon.points.insert(polygon.points.end(), path.polyline.points.begin(), path.polyline.points.end()-1);
+        for (auto it = path.polyline.points.begin(); it != path.polyline.points.end() - 1; ++it) {
+            polygon.points.push_back(it->to_point());
+        }
     }
     return polygon;
 }
@@ -168,7 +185,7 @@ bool ExtrusionLoop::split_at_vertex(const Point &point, const double scaled_epsi
         if (int idx = path->polyline.find_point(point, scaled_epsilon); idx != -1) {
             if (this->paths.size() == 1) {
                 // just change the order of points
-                Polyline p1, p2;
+                Polyline3 p1, p2;
                 path->polyline.split_at_index(idx, &p1, &p2);
                 if (p1.is_valid() && p2.is_valid()) {
                     p2.append(std::move(p1));
@@ -178,7 +195,7 @@ bool ExtrusionLoop::split_at_vertex(const Point &point, const double scaled_epsi
             } else {
                 // new paths list starts with the second half of current path
                 ExtrusionPaths new_paths;
-                Polyline p1, p2;
+                Polyline3 p1, p2;
                 path->polyline.split_at_index(idx, &p1, &p2);
                 new_paths.reserve(this->paths.size() + 1);
                 {
@@ -218,16 +235,17 @@ ExtrusionLoop::ClosestPathPoint ExtrusionLoop::get_closest_path_and_point(const
     ClosestPathPoint best_non_overhang{0, 0};
     double           min2_non_overhang = std::numeric_limits<double>::max();
     for (const ExtrusionPath &path : this->paths) {
-        std::pair<int, Point> foot_pt_ = foot_pt(path.polyline.points, point);
-        double                d2       = (foot_pt_.second - point).cast<double>().squaredNorm();
+        std::pair<int, Point3> foot_pt_ = foot_pt(path.polyline.points, Point3(point));
+        Point                  foot_pt_2d = Point(foot_pt_.second.x(), foot_pt_.second.y());
+        double                 d2       = (foot_pt_2d - point).cast<double>().squaredNorm();
         if (d2 < min2) {
-            out.foot_pt     = foot_pt_.second;
+            out.foot_pt     = foot_pt_2d;
             out.path_idx    = &path - &this->paths.front();
             out.segment_idx = foot_pt_.first;
             min2            = d2;
         }
         if (prefer_non_overhang && !is_bridge(path.role()) && d2 < min2_non_overhang) {
-            best_non_overhang.foot_pt     = foot_pt_.second;
+            best_non_overhang.foot_pt     = foot_pt_2d;
             best_non_overhang.path_idx    = &path - &this->paths.front();
             best_non_overhang.segment_idx = foot_pt_.first;
             min2_non_overhang             = d2;
@@ -249,16 +267,18 @@ void ExtrusionLoop::split_at(const Point &point, bool prefer_non_overhang, const
 
     // Snap p to start or end of segment_idx if closer than scaled_epsilon.
     {
-        const Point *p1 = this->paths[path_idx].polyline.points.data() + segment_idx;
-        const Point *p2 = p1;
+        const Point3 *p1 = this->paths[path_idx].polyline.points.data() + segment_idx;
+        const Point3 *p2 = p1;
         ++p2;
-        double       d2_1 = (point - *p1).cast<double>().squaredNorm();
-        double       d2_2 = (point - *p2).cast<double>().squaredNorm();
+        Point        p1_2d = Point(p1->x(), p1->y());
+        Point        p2_2d = Point(p2->x(), p2->y());
+        double       d2_1 = (point - p1_2d).cast<double>().squaredNorm();
+        double       d2_2 = (point - p2_2d).cast<double>().squaredNorm();
         const double thr2 = scaled_epsilon * scaled_epsilon;
         if (d2_1 < d2_2) {
-            if (d2_1 < thr2) p = *p1;
+            if (d2_1 < thr2) p = p1_2d;
         } else {
-            if (d2_2 < thr2) p = *p2;
+            if (d2_2 < thr2) p = p2_2d;
         }
     }
     
@@ -266,8 +286,9 @@ void ExtrusionLoop::split_at(const Point &point, bool prefer_non_overhang, const
     const ExtrusionPath &path = this->paths[path_idx];
     ExtrusionPath p1(path.role(), path.mm3_per_mm, path.width, path.height);
     ExtrusionPath p2(path.role(), path.mm3_per_mm, path.width, path.height);
+    p1.z_contoured = p2.z_contoured = path.z_contoured;
     path.polyline.split_at(p, &p1.polyline, &p2.polyline);
-    
+
     if (this->paths.size() == 1) {
         if (!p1.polyline.is_valid()) {
             std::swap(this->paths.front().polyline.points, p2.polyline.points);
@@ -411,16 +432,16 @@ ExtrusionLoopSloped::ExtrusionLoopSloped(ExtrusionPaths&   original_paths,
     : ExtrusionLoop(role)
 {
     // create slopes
-    const auto add_slop = [this, slope_max_segment_length, seam_gap](const ExtrusionPath &path, const Polyline &poly, double ratio_begin, double ratio_end) {
+    const auto add_slop = [this, slope_max_segment_length, seam_gap](const ExtrusionPath &path, const Polyline3 &poly, double ratio_begin, double ratio_end) {
         if (poly.empty()) { return; }
 
         // Ensure `slope_max_segment_length`
-        Polyline detailed_poly;
+        Polyline3 detailed_poly;
         {
             detailed_poly.append(poly.first_point());
 
             // Recursively split the line into half until no longer than `slope_max_segment_length`
-            const std::function<void(const Line &)> handle_line = [slope_max_segment_length, &detailed_poly, &handle_line](const Line &line) {
+            const std::function<void(const Line3 &)> handle_line = [slope_max_segment_length, &detailed_poly, &handle_line](const Line3 &line) {
                 if (line.length() <= slope_max_segment_length) {
                     detailed_poly.append(line.b);
                 } else {
@@ -441,8 +462,8 @@ ExtrusionLoopSloped::ExtrusionLoopSloped(ExtrusionPaths&   original_paths,
             const auto seg_length = detailed_poly.length();
             if (seg_length > seam_gap) {
                 // Split the segment and remove the last `seam_gap` bit
-                const Polyline orig = detailed_poly;
-                Polyline       tmp;
+                const Polyline3 orig = detailed_poly;
+                Polyline3       tmp;
                 orig.split_at_length(seg_length - seam_gap, &detailed_poly, &tmp);
 
                 ratio_end = lerp(ratio_begin, ratio_end, (seg_length - seam_gap) / seg_length);
@@ -464,8 +485,8 @@ ExtrusionLoopSloped::ExtrusionLoopSloped(ExtrusionPaths&   original_paths,
         const double path_len = unscale_(path->length());
         if (path_len > remaining_length) {
             // Split current path into slope and non-slope part
-            Polyline slope_path;
-            Polyline flat_path;
+            Polyline3 slope_path;
+            Polyline3 flat_path;
             path->polyline.split_at_length(scale_(remaining_length), &slope_path, &flat_path);
 
             add_slop(*path, slope_path, start_ratio, 1);
@@ -631,4 +652,28 @@ ExtrusionRole ExtrusionEntity::string_to_role(const std::string_view role)
         return erNone;
 }
 
+// ExtrusionPathContoured implementation
+ExtrusionEntity *ExtrusionPathContoured::clone() const {
+    return new ExtrusionPathContoured(*this);
+}
+
+ExtrusionEntity *ExtrusionPathContoured::clone_move() {
+    return new ExtrusionPathContoured(std::move(*this));
+}
+
+void ExtrusionPathContoured::simplify(double tolerance) {
+    // Do not simplify contoured paths
+    return;
+}
+
+void ExtrusionPathContoured::simplify_by_fitting_arc(double tolerance) {
+    // Do not simplify contoured paths
+    return;
+}
+
+void ExtrusionPathContoured::reverse() {
+    this->polyline.reverse();
+    std::reverse(this->z_diffs.begin(), this->z_diffs.end());
+}
+
 }

src/libslic3r/ExtrusionEntity.hpp

@@ -116,8 +116,8 @@ public:
     virtual ExtrusionEntity* clone_move() = 0;
     virtual ~ExtrusionEntity() {}
     virtual void reverse() = 0;
-    virtual const Point& first_point() const = 0;
-    virtual const Point& last_point() const = 0;
+    virtual Point first_point() const = 0;
+    virtual Point last_point() const = 0;
     // Produce a list of 2D polygons covered by the extruded paths, offsetted by the extrusion width.
     // Increase the offset by scaled_epsilon to achieve an overlap, so a union will produce no gaps.
     virtual void polygons_covered_by_width(Polygons &out, const float scaled_epsilon) const = 0;
@@ -150,13 +150,17 @@ typedef std::vector<ExtrusionEntity*> ExtrusionEntitiesPtr;
 class ExtrusionPath : public ExtrusionEntity
 {
 public:
-    Polyline polyline;
+    Polyline3 polyline;
+    double overhang_degree = 0;
+    int curve_degree = 0;
     // Volumetric velocity. mm^3 of plastic per mm of linear head motion. Used by the G-code generator.
     double mm3_per_mm;
     // Width of the extrusion, used for visualization purposes.
     float width;
     // Height of the extrusion, used for visualization purposes.
     float height;
+    double smooth_speed = 0;
+    bool z_contoured = false;
 
     ExtrusionPath() : mm3_per_mm(-1), width(-1), height(-1), m_role(erNone), m_no_extrusion(false) {}
     ExtrusionPath(ExtrusionRole role) : mm3_per_mm(-1), width(-1), height(-1), m_role(role), m_no_extrusion(false) {}
@@ -164,36 +168,52 @@ public:
 
     ExtrusionPath(const ExtrusionPath &rhs)
         : polyline(rhs.polyline)
+        , overhang_degree(rhs.overhang_degree)
+        , curve_degree(rhs.curve_degree)
         , mm3_per_mm(rhs.mm3_per_mm)
         , width(rhs.width)
         , height(rhs.height)
+        , smooth_speed(rhs.smooth_speed)
+        , z_contoured(rhs.z_contoured)
         , m_can_reverse(rhs.m_can_reverse)
         , m_role(rhs.m_role)
         , m_no_extrusion(rhs.m_no_extrusion)
     {}
     ExtrusionPath(ExtrusionPath &&rhs)
         : polyline(std::move(rhs.polyline))
+        , overhang_degree(rhs.overhang_degree)
+        , curve_degree(rhs.curve_degree)
         , mm3_per_mm(rhs.mm3_per_mm)
         , width(rhs.width)
         , height(rhs.height)
+        , smooth_speed(rhs.smooth_speed)
+        , z_contoured(rhs.z_contoured)
         , m_can_reverse(rhs.m_can_reverse)
         , m_role(rhs.m_role)
         , m_no_extrusion(rhs.m_no_extrusion)
     {}
-    ExtrusionPath(const Polyline &polyline, const ExtrusionPath &rhs)
+    ExtrusionPath(const Polyline3 &polyline, const ExtrusionPath &rhs)
         : polyline(polyline)
+        , overhang_degree(rhs.overhang_degree)
+        , curve_degree(rhs.curve_degree)
         , mm3_per_mm(rhs.mm3_per_mm)
         , width(rhs.width)
         , height(rhs.height)
+        , smooth_speed(rhs.smooth_speed)
+        , z_contoured(rhs.z_contoured)
         , m_can_reverse(rhs.m_can_reverse)
         , m_role(rhs.m_role)
         , m_no_extrusion(rhs.m_no_extrusion)
     {}
-    ExtrusionPath(Polyline &&polyline, const ExtrusionPath &rhs)
+    ExtrusionPath(Polyline3 &&polyline, const ExtrusionPath &rhs)
         : polyline(std::move(polyline))
+        , overhang_degree(rhs.overhang_degree)
+        , curve_degree(rhs.curve_degree)
         , mm3_per_mm(rhs.mm3_per_mm)
         , width(rhs.width)
         , height(rhs.height)
+        , smooth_speed(rhs.smooth_speed)
+        , z_contoured(rhs.z_contoured)
         , m_can_reverse(rhs.m_can_reverse)
         , m_role(rhs.m_role)
         , m_no_extrusion(rhs.m_no_extrusion)
@@ -206,6 +226,10 @@ public:
         this->mm3_per_mm = rhs.mm3_per_mm;
         this->width = rhs.width;
         this->height = rhs.height;
+        this->smooth_speed = rhs.smooth_speed;
+        this->z_contoured = rhs.z_contoured;
+        this->overhang_degree = rhs.overhang_degree;
+        this->curve_degree = rhs.curve_degree;
         this->polyline = rhs.polyline;
         return *this;
     }
@@ -216,6 +240,10 @@ public:
         this->mm3_per_mm = rhs.mm3_per_mm;
         this->width = rhs.width;
         this->height = rhs.height;
+        this->smooth_speed = rhs.smooth_speed;
+        this->z_contoured = rhs.z_contoured;
+        this->overhang_degree = rhs.overhang_degree;
+        this->curve_degree = rhs.curve_degree;
         this->polyline = std::move(rhs.polyline);
         return *this;
     }
@@ -224,8 +252,10 @@ public:
     // Create a new object, initialize it with this object using the move semantics.
 	ExtrusionEntity* clone_move() override { return new ExtrusionPath(std::move(*this)); }
     void reverse() override { this->polyline.reverse(); }
-    const Point& first_point() const override { return this->polyline.points.front(); }
-    const Point& last_point() const override { return this->polyline.points.back(); }
+    Point first_point() const override { return this->polyline.points.front().to_point(); }
+    Point3 first_point3() const { return this->polyline.points.front(); }
+    Point last_point() const override { return this->polyline.points.back().to_point(); }
+    Point3 last_point3() const { return this->polyline.points.back(); }
     size_t size() const { return this->polyline.size(); }
     bool empty() const { return this->polyline.empty(); }
     bool is_closed() const { return ! this->empty() && this->polyline.points.front() == this->polyline.points.back(); }
@@ -236,7 +266,7 @@ public:
     // Currently not used.
     void subtract_expolygons(const ExPolygons &collection, ExtrusionEntityCollection* retval) const;
     void clip_end(double distance);
-    void simplify(double tolerance);
+    virtual void simplify(double tolerance);
     double length() const override;
     ExtrusionRole role() const override { return m_role; }
     // Produce a list of 2D polygons covered by the extruded paths, offsetted by the extrusion width.
@@ -252,9 +282,10 @@ public:
         { Polygons out; this->polygons_covered_by_spacing(out, scaled_epsilon); return out; }
     // Minimum volumetric velocity of this extrusion entity. Used by the constant nozzle pressure algorithm.
     double min_mm3_per_mm() const override { return this->mm3_per_mm; }
-    Polyline as_polyline() const override { return this->polyline; }
-    void   collect_polylines(Polylines &dst) const override { if (! this->polyline.empty()) dst.emplace_back(this->polyline); }
-    void   collect_points(Points &dst) const override { append(dst, this->polyline.points); }
+    Polyline as_polyline() const override { return this->polyline.to_polyline(); }
+    void   collect_polylines(Polylines &dst) const override { if (! this->polyline.empty()) dst.emplace_back(this->polyline.to_polyline()); }
+    void   collect_points(Points &dst) const override;
+    void   collect_points3(Points3 &dst) const { append(dst, this->polyline.points); }
     double total_volume() const override { return mm3_per_mm * unscale<double>(length()); }
 
     //BBS: add new simplifing method by fitting arc
@@ -274,6 +305,23 @@ private:
     bool m_no_extrusion = false;
 };
 
+class ExtrusionPathContoured : public ExtrusionPath {
+public:
+    std::vector<double> z_diffs;
+
+    ExtrusionPathContoured(Polyline3 &&polyline, const ExtrusionPath &rhs, std::vector<double> &&z_diffs)
+        : ExtrusionPath(std::move(polyline), rhs), z_diffs(std::move(z_diffs))
+    {}
+
+    virtual ExtrusionEntity *clone() const override;
+    virtual ExtrusionEntity *clone_move() override;
+
+    void simplify(double tolerance) override;
+    virtual void simplify_by_fitting_arc(double tolerance);
+
+    void reverse() override;
+};
+
 class ExtrusionPathSloped : public ExtrusionPath
 {
 public:
@@ -292,10 +340,10 @@ public:
     ExtrusionPathSloped(ExtrusionPath&& rhs, const Slope& begin, const Slope& end)
         : ExtrusionPath(std::move(rhs)), slope_begin(begin), slope_end(end)
     {}
-    ExtrusionPathSloped(const Polyline& polyline, const ExtrusionPath& rhs, const Slope& begin, const Slope& end)
+    ExtrusionPathSloped(const Polyline3& polyline, const ExtrusionPath& rhs, const Slope& begin, const Slope& end)
         : ExtrusionPath(polyline, rhs), slope_begin(begin), slope_end(end)
     {}
-    ExtrusionPathSloped(Polyline&& polyline, const ExtrusionPath& rhs, const Slope& begin, const Slope& end)
+    ExtrusionPathSloped(Polyline3&& polyline, const ExtrusionPath& rhs, const Slope& begin, const Slope& end)
         : ExtrusionPath(std::move(polyline), rhs), slope_begin(begin), slope_end(end)
     {}
 
@@ -354,8 +402,8 @@ public:
     // Create a new object, initialize it with this object using the move semantics.
 	ExtrusionEntity* clone_move() override { return new ExtrusionMultiPath(std::move(*this)); }
     void reverse() override;
-    const Point& first_point() const override { return this->paths.front().polyline.points.front(); }
-    const Point& last_point() const override { return this->paths.back().polyline.points.back(); }
+    Point first_point() const override { return this->paths.front().polyline.points.front().to_point(); }
+    Point last_point() const override { return this->paths.back().polyline.points.back().to_point(); }
     size_t size() const { return this->paths.size(); }
     bool empty() const { return this->paths.empty(); }
     double length() const override;
@@ -379,7 +427,7 @@ public:
         size_t n = std::accumulate(paths.begin(), paths.end(), 0, [](const size_t n, const ExtrusionPath &p){ return n + p.polyline.size(); });
         dst.reserve(dst.size() + n);
         for (const ExtrusionPath &p : this->paths)
-            append(dst, p.polyline.points);
+            append(dst, to_points(p.polyline.points));
     }
     double total_volume() const override { double volume =0.; for (const auto& path : paths) volume += path.total_volume(); return volume; }
 
@@ -410,8 +458,8 @@ public:
     bool is_clockwise() { return this->polygon().is_clockwise(); }
     bool is_counter_clockwise() { return this->polygon().is_counter_clockwise(); }
     void reverse() override;
-    const Point& first_point() const override { return this->paths.front().polyline.points.front(); }
-    const Point& last_point() const override { assert(this->first_point() == this->paths.back().polyline.points.back()); return this->first_point(); }
+    Point first_point() const override { return this->paths.front().polyline.points.front().to_point(); }
+    Point last_point() const override { assert(this->first_point() == this->paths.back().polyline.points.back().to_point()); return this->first_point(); }
     Polygon polygon() const;
     double length() const override;
     bool split_at_vertex(const Point &point, const double scaled_epsilon = scaled<double>(0.001));
@@ -443,13 +491,17 @@ public:
         { Polygons out; this->polygons_covered_by_spacing(out, scaled_epsilon); return out; }
     // Minimum volumetric velocity of this extrusion entity. Used by the constant nozzle pressure algorithm.
     double min_mm3_per_mm() const override;
-    Polyline as_polyline() const override { return this->polygon().split_at_first_point(); }
+    Polyline as_polyline() const override {
+        if (this->paths.empty() || this->length() <= 0.)
+            return Polyline();
+        return this->polygon().split_at_first_point();
+    }
     void   collect_polylines(Polylines &dst) const override { Polyline pl = this->as_polyline(); if (! pl.empty()) dst.emplace_back(std::move(pl)); }
     void   collect_points(Points &dst) const override {
         size_t n = std::accumulate(paths.begin(), paths.end(), 0, [](const size_t n, const ExtrusionPath &p){ return n + p.polyline.size(); });
         dst.reserve(dst.size() + n);
         for (const ExtrusionPath &p : this->paths)
-            append(dst, p.polyline.points);
+            append(dst, to_points(p.polyline.points));
     }
     double total_volume() const override { double volume =0.; for (const auto& path : paths) volume += path.total_volume(); return volume; }
     // check if the loop is smooth, angle_threshold is in radians, default is 10 degrees
@@ -495,7 +547,7 @@ inline void extrusion_paths_append(ExtrusionPaths &dst, Polylines &polylines, Ex
     for (Polyline &polyline : polylines)
         if (polyline.is_valid()) {
             dst.emplace_back(role, mm3_per_mm, width, height);
-            dst.back().polyline = polyline;
+            dst.back().polyline = Polyline3(polyline);
         }
 }
 
@@ -505,7 +557,7 @@ inline void extrusion_paths_append(ExtrusionPaths &dst, Polylines &&polylines, E
     for (Polyline &polyline : polylines)
         if (polyline.is_valid()) {
             dst.emplace_back(role, mm3_per_mm, width, height);
-            dst.back().polyline = std::move(polyline);
+            dst.back().polyline = Polyline3(std::move(polyline));
         }
     polylines.clear();
 }
@@ -515,7 +567,7 @@ inline void extrusion_paths_append(ExtrusionPaths &dst, Polyline &&polyline, Ext
     dst.reserve(dst.size() + 1);
     if (polyline.is_valid()) {
         dst.emplace_back(role, mm3_per_mm, width, height);
-        dst.back().polyline = std::move(polyline);
+        dst.back().polyline = Polyline3(std::move(polyline));
     }
 }
 
@@ -526,7 +578,7 @@ inline void extrusion_entities_append_paths(ExtrusionEntitiesPtr &dst, Polylines
         if (polyline.is_valid()) {
             ExtrusionPath *extrusion_path = can_reverse ? new ExtrusionPath(role, mm3_per_mm, width, height) : new ExtrusionPathOriented(role, mm3_per_mm, width, height);
             dst.push_back(extrusion_path);
-            extrusion_path->polyline = polyline;
+            extrusion_path->polyline = Polyline3(polyline);
         }
 }
 
@@ -537,7 +589,7 @@ inline void extrusion_entities_append_paths(ExtrusionEntitiesPtr &dst, Polylines
         if (polyline.is_valid()) {
             ExtrusionPath *extrusion_path = can_reverse ? new ExtrusionPath(role, mm3_per_mm, width, height) : new ExtrusionPathOriented(role, mm3_per_mm, width, height);
             dst.push_back(extrusion_path);
-            extrusion_path->polyline = std::move(polyline);
+            extrusion_path->polyline = Polyline3(std::move(polyline));
         }
     polylines.clear();
 }
@@ -557,7 +609,7 @@ inline void extrusion_entities_append_paths_with_wipe(ExtrusionEntitiesPtr &dst,
                 Point temp = polyline.first_point() - last_end_point;
                 if (Vec2d(temp.x(), temp.y()).norm() <= 3 * scaled(width)) {
                     multi_path->paths.emplace_back(role, mm3_per_mm, width, height, true);
-                    multi_path->paths.back().polyline = std::move(Polyline(last_end_point, polyline.first_point()));
+                    multi_path->paths.back().polyline = Polyline3(Polyline(last_end_point, polyline.first_point()));
                 } else {
                     dst.push_back(multi_path);
                     multi_path = new ExtrusionMultiPath();
@@ -565,9 +617,9 @@ inline void extrusion_entities_append_paths_with_wipe(ExtrusionEntitiesPtr &dst,
             }
 
             multi_path->paths.emplace_back(role, mm3_per_mm, width, height);
-            multi_path->paths.back().polyline = std::move(polyline);
+            multi_path->paths.back().polyline = Polyline3(std::move(polyline));
             last_end_point_valid = true;
-            last_end_point = multi_path->paths.back().polyline.last_point();
+            last_end_point = multi_path->paths.back().polyline.last_point().to_point();
         }
     }
     if (!multi_path->empty())
@@ -582,7 +634,9 @@ inline void extrusion_entities_append_loops(ExtrusionEntitiesPtr &dst, Polygons
     for (Polygon &poly : loops) {
         if (poly.is_valid()) {
             ExtrusionPath path(role, mm3_per_mm, width, height);
-            path.polyline.points = std::move(poly.points);
+            path.polyline.points.reserve(poly.points.size() + 1);
+            for (const Point &pt : poly.points)
+                path.polyline.points.emplace_back(Point3(pt, 0));
             path.polyline.points.push_back(path.polyline.points.front());
             dst.emplace_back(new ExtrusionLoop(std::move(path)));
         }
@@ -597,11 +651,11 @@ inline void extrusion_entities_append_loops_and_paths(ExtrusionEntitiesPtr &dst,
         if (polyline.is_valid()) {
             if (polyline.is_closed()) {
                 ExtrusionPath extrusion_path(role, mm3_per_mm, width, height);
-                extrusion_path.polyline = std::move(polyline);
+                extrusion_path.polyline = Polyline3(std::move(polyline));
                 dst.emplace_back(new ExtrusionLoop(std::move(extrusion_path)));
             } else {
                 ExtrusionPath *extrusion_path = new ExtrusionPath(role, mm3_per_mm, width, height);
-                extrusion_path->polyline      = std::move(polyline);
+                extrusion_path->polyline      = Polyline3(std::move(polyline));
                 dst.emplace_back(extrusion_path);
             }
         }

src/libslic3r/ExtrusionEntityCollection.hpp

@@ -118,8 +118,8 @@ public:
     ExtrusionEntityCollection chained_path_from(const Point &start_near, ExtrusionRole role = erMixed) const 
     	{ return this->no_sort ? *this : chained_path_from(this->entities, start_near, role); }
     void reverse() override;
-    const Point& first_point() const override { return this->entities.front()->first_point(); }
-    const Point& last_point() const override { return this->entities.back()->last_point(); }
+    Point first_point() const override { return this->entities.front()->first_point(); }
+    Point last_point() const override { return this->entities.back()->last_point(); }
     // Produce a list of 2D polygons covered by the extruded paths, offsetted by the extrusion width.
     // Increase the offset by scaled_epsilon to achieve an overlap, so a union will produce no gaps.
     void polygons_covered_by_width(Polygons &out, const float scaled_epsilon) const override;

src/libslic3r/ExtrusionSimulator.cpp

@@ -962,7 +962,7 @@ void ExtrusionSimulator::extrude_to_accumulator(const ExtrusionPath &path, const
 	w = scale_(path.mm3_per_mm / path.height) * scalex;
 	// printf("scalex: %f, scaley: %f\n", scalex, scaley);
 	// printf("bbox: %d,%d %d,%d\n", bbox.min.x(), bbox.min.y, bbox.max.x(), bbox.max.y);
-	for (Points::const_iterator it = path.polyline.points.begin(); it != path.polyline.points.end(); ++ it) {
+	for (Points3::const_iterator it = path.polyline.points.begin(); it != path.polyline.points.end(); ++ it) {
 		// printf("point %d,%d\n", it->x+shift.x(), it->y+shift.y);
 		ExtrusionPoint ept;
 		ept.center = V2f(float((*it)(0)+shift.x()-bbox.min.x()) * scalex, float((*it)(1)+shift.y()-bbox.min.y()) * scaley);

src/libslic3r/Fill/Fill.cpp

@@ -1218,6 +1218,10 @@ void Layer::make_fills(FillAdaptive::Octree* adaptive_fill_octree, FillAdaptive:
         std::unique_ptr<Fill> f = std::unique_ptr<Fill>(Fill::new_from_type(surface_fill.params.pattern));
         f->set_bounding_box(bbox);
         f->layer_id = this->id();
+        {
+            const auto &rcfg = m_regions[surface_fill.region_id]->region().config();
+            f->dont_alternate_fill_direction = rcfg.zaa_enabled && rcfg.zaa_dont_alternate_fill_direction;
+        }
         f->z 		= this->print_z;
         f->angle 	= surface_fill.params.angle;
         f->fixed_angle = surface_fill.params.fixed_angle;
@@ -1418,6 +1422,10 @@ Polylines Layer::generate_sparse_infill_polylines_for_anchoring(FillAdaptive::Oc
         std::unique_ptr<Fill> f = std::unique_ptr<Fill>(Fill::new_from_type(surface_fill.params.pattern));
         f->set_bounding_box(bbox);
         f->layer_id = this->id() - this->object()->get_layer(0)->id(); // We need to subtract raft layers.
+        {
+            const auto &rcfg = m_regions[surface_fill.region_id]->region().config();
+            f->dont_alternate_fill_direction = rcfg.zaa_enabled && rcfg.zaa_dont_alternate_fill_direction;
+        }
         f->z        = this->print_z;
         f->angle    = surface_fill.params.angle;
         f->fixed_angle = surface_fill.params.fixed_angle;
@@ -1595,6 +1603,7 @@ void Layer::make_ironing()
 	for (size_t i = 0; i < by_extruder.size();) {
 		// Find span of regions equivalent to the ironing operation.
 		IroningParams &ironing_params = by_extruder[i];
+        f->dont_alternate_fill_direction = ironing_params.layerm->region().config().zaa_enabled && ironing_params.layerm->region().config().zaa_dont_alternate_fill_direction;
 		// Create the filler object.
 		if( f_pattern != ironing_params.pattern )
 		{

src/libslic3r/Fill/FillBase.cpp

@@ -308,7 +308,9 @@ std::pair<float, Point> Fill::_infill_direction(const Surface *surface) const
     } else if (this->layer_id != size_t(-1) && !fixed_angle) {
         // alternate fill direction
         //Orca: Do not alternate direction if Fill.fixed_angle is true
-        out_angle += this->_layer_angle(this->layer_id / surface->thickness_layers);
+        if (!this->dont_alternate_fill_direction) {
+            out_angle += this->_layer_angle(this->layer_id / surface->thickness_layers);
+        }
     } else {
 //    	printf("Layer_ID undefined!\n");
     }

src/libslic3r/Fill/FillBase.hpp

@@ -141,6 +141,7 @@ public:
 
     // BBS: all no overlap expolygons in same layer
     ExPolygons  no_overlap_expolygons;
+    bool dont_alternate_fill_direction = false;
 
     static float infill_anchor;
     static float infill_anchor_max;

src/libslic3r/Fill/FillRectilinear.cpp

@@ -3088,12 +3088,13 @@ bool FillRectilinear::fill_surface_trapezoidal(
     case 0: // Grid / Trapezoidal
     {
         // Generate a non-crossing trapezoidal pattern to avoid overextrusion at intersections when `multiline > 1`.
-        //      P1--P2
-        //     /      \
-        //  P0/        \P3__P4
+        //         P2--P3
+        //        /      \
+        //  P0_P1/        \P4_
         //
-        // P1x-P2x=P3x-P4x=d1
-        // P0y-P1y=P2y-P3y=d2
+        // P0xP1x=P4xP0x=d1/2
+        // P2xP3x=d1
+        // P1yP2y=P2yP3y=d2
         
         const coord_t d2 = coord_t(0.5 * period - d1);
 
@@ -3113,11 +3114,11 @@ bool FillRectilinear::fill_surface_trapezoidal(
         // Build complete rows from xmin to xmax
         for (coord_t x = xmin; x < xmax; x += period) {
             // Normal row
-            base_row_normal.points.emplace_back(Point(x, d1 / 2));                    // P0
-            base_row_normal.points.emplace_back(Point(x + d1, d1 / 2));               // P1
-            base_row_normal.points.emplace_back(Point(x + d1 + d2, d1 / 2 + d2));     // P2
-            base_row_normal.points.emplace_back(Point(x + 2 * d1 + d2, d1 / 2 + d2)); // P3
-            base_row_normal.points.emplace_back(Point(x + 2 * d1 + 2 * d2, d1 / 2));  // P4
+            base_row_normal.points.emplace_back(Point(x, d1 / 2));                             // P0
+            base_row_normal.points.emplace_back(Point(x + d1 / 2, d1 / 2));                    // P1
+            base_row_normal.points.emplace_back(Point(x + d1 / 2 + d2, d1 / 2 + d2));          // P2
+            base_row_normal.points.emplace_back(Point(x + d1 / 2 + d2 + d1, d1 / 2 + d2));     // P3
+            base_row_normal.points.emplace_back(Point(x + period - d1 / 2, d1 / 2));           // P4
         }
 
         // Flipped row (mirrored vertically)
@@ -3150,8 +3151,6 @@ bool FillRectilinear::fill_surface_trapezoidal(
             for (Polyline& pl : polylines) {
                 for (Point& p : pl.points) {
                     std::swap(p.x(), p.y());
-                    p.x() += d1 / 2;
-                    p.y() -= d1 / 2;
                 }
             }
         }
@@ -3165,8 +3164,8 @@ bool FillRectilinear::fill_surface_trapezoidal(
         //     /     \
         //  P0/       \P3_P4
         //  ----------------
-        // P1x-P2x=P3x-P4x=d2
-        // P0y-P1y=P2y-P3y=h-2d1
+        // P1xP2x=P3xP4x=d2
+        // P0yP1y=P2yP3y=h-2d1
         //
         
         // Triangular pattern density adjustment:

src/libslic3r/GCode.cpp

@@ -1,5 +1,6 @@
 #include "BoundingBox.hpp"
 #include "Config.hpp"
+#include "GCodeWriter.hpp"
 #include "Polygon.hpp"
 #include "PrintConfig.hpp"
 #include "libslic3r.h"
@@ -22,10 +23,12 @@
 #include "Time.hpp"
 #include "GCode/ExtrusionProcessor.hpp"
 #include <algorithm>
+#include <cfloat>
 #include <cmath>
 #include <cstdlib>
 #include <chrono>
 #include <iostream>
+#include <iterator>
 #include <math.h>
 #include <stdlib.h>
 #include <string>
@@ -2416,6 +2419,7 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
     m_max_layer_z  = 0.f;
     m_last_width = 0.f;
     m_is_role_based_fan_on.fill(false);
+    m_role_based_fan_marker_layer.fill(-1);
 
     m_fan_mover.release();
     
@@ -5521,12 +5525,12 @@ void GCode::set_extruders(const std::vector<unsigned int> &extruder_ids)
 void GCode::set_origin(const Vec2d &pointf)
 {
     // if origin increases (goes towards right), last_pos decreases because it goes towards left
-    const Point translate(
+    const Point3 translate(
         scale_(m_origin(0) - pointf(0)),
         scale_(m_origin(1) - pointf(1))
     );
     m_last_pos += translate;
-    m_wipe.path.translate(translate);
+    m_wipe.path.translate(translate.to_point());
     m_origin = pointf;
 }
 
@@ -5603,11 +5607,15 @@ static std::unique_ptr<EdgeGrid::Grid> calculate_layer_edge_grid(const Layer& la
     return out;
 }
 
-std::string GCode::extrude_loop(ExtrusionLoop loop, std::string description, double speed, const ExtrusionEntitiesPtr& region_perimeters, const Point* start_point)
+std::string GCode::extrude_loop(const ExtrusionLoop&        loop_ref,
+                                const std::string&          description,
+                                double                      speed,
+                                const ExtrusionEntitiesPtr& region_perimeters,
+                                const Point*                start_point)
 {
-    
     // get a copy; don't modify the orientation of the original loop object otherwise
     // next copies (if any) would not detect the correct orientation
+    ExtrusionLoop loop = loop_ref;
 
     bool is_hole = (loop.loop_role() & elrHole) == elrHole;
 
@@ -5682,13 +5690,14 @@ std::string GCode::extrude_loop(ExtrusionLoop loop, std::string description, dou
         const double nozzle_diam = nozzle_diameter;
 
         // note: previous & next are inverted to extrude "in the opposite direction, and we are "rewinding"
-        Point previous_point = paths.front().polyline.points[1];
-        Point current_point = paths.front().polyline.points.front();
-        Point next_point = paths.back().polyline.points.back();
+        Point previous_point = Point(paths.front().polyline.points[1].x(), paths.front().polyline.points[1].y());
+        Point current_point = Point(paths.front().polyline.points.front().x(), paths.front().polyline.points.front().y());
+        Point next_point = Point(paths.back().polyline.points.back().x(), paths.back().polyline.points.back().y());
 
         // can happen if seam_gap is null
         if (next_point == current_point) {
-            next_point = paths.back().polyline.points[paths.back().polyline.points.size() - 2];
+            const Point3 &p3 = paths.back().polyline.points[paths.back().polyline.points.size() - 2];
+            next_point = Point(p3.x(), p3.y());
         }
 
         Point a = next_point;  // second point
@@ -5735,7 +5744,7 @@ std::string GCode::extrude_loop(ExtrusionLoop loop, std::string description, dou
         // inside the model
         if(discoveredTouchingLines > 1){
             // use extrude instead of travel_to_xy to trigger the unretract
-            ExtrusionPath fake_path_wipe(Polyline{pt, current_point}, paths.front());
+            ExtrusionPath fake_path_wipe(Polyline3(Points3{Point3(pt), Point3(current_point)}), paths.front());
             fake_path_wipe.set_force_no_extrusion(true);
             fake_path_wipe.mm3_per_mm = 0;
             //fake_path_wipe.set_extrusion_role(erExternalPerimeter);
@@ -5771,7 +5780,7 @@ std::string GCode::extrude_loop(ExtrusionLoop loop, std::string description, dou
     if (!enable_seam_slope) {
         for (ExtrusionPaths::iterator path = paths.begin(); path != paths.end(); ++path) {
             gcode += this->_extrude(*path, description, speed_for_path(*path));
-            // Orca: Adaptive PA - dont adapt PA after the first pultipath extrusion is completed
+            // Orca: Adaptive PA - dont adapt PA after the first multipath extrusion is completed
             // as we have already set the PA value to the average flow over the totality of the path
             // in the first extrude move
             // TODO: testing is needed with slope seams and adaptive PA.
@@ -5829,10 +5838,12 @@ std::string GCode::extrude_loop(ExtrusionLoop loop, std::string description, dou
         for (ExtrusionPath &path : paths) {
             //BBS: Don't need to save duplicated point into wipe path
             if (!m_wipe.path.empty() && !path.empty() &&
-                m_wipe.path.last_point() == path.first_point())
-                m_wipe.path.append(path.polyline.points.begin() + 1, path.polyline.points.end());
-            else
-                m_wipe.path.append(path.polyline);  // TODO: don't limit wipe to last path
+                m_wipe.path.last_point() == Point(path.first_point().x(), path.first_point().y())) {
+                // Convert Points3 to Points
+                for (auto it = path.polyline.points.begin() + 1; it != path.polyline.points.end(); ++it)
+                    m_wipe.path.append(Point(it->x(), it->y()));
+            } else
+                m_wipe.path.append(path.polyline.to_polyline());  // TODO: don't limit wipe to last path
         }
     }
 
@@ -5842,8 +5853,10 @@ std::string GCode::extrude_loop(ExtrusionLoop loop, std::string description, dou
         // the side depends on the original winding order of the polygon (inwards for contours, outwards for holes)
         //FIXME improve the algorithm in case the loop is tiny.
         //FIXME improve the algorithm in case the loop is split into segments with a low number of points (see the Point b query).
-        Point a = paths.front().polyline.points[1];  // second point
-        Point b = *(paths.back().polyline.points.end()-3);       // second to last point
+        const Point3 &a3 = paths.front().polyline.points[1];  // second point
+        Point a = Point(a3.x(), a3.y());
+        const Point3 &b3 = *(paths.back().polyline.points.end()-3);       // second to last point
+        Point b = Point(b3.x(), b3.y());
         if (is_hole == loop.is_counter_clockwise()) {
             // swap points
             Point c = a; a = b; b = c;
@@ -5857,8 +5870,8 @@ std::string GCode::extrude_loop(ExtrusionLoop loop, std::string description, dou
         // create the destination point along the first segment and rotate it
         // we make sure we don't exceed the segment length because we don't know
         // the rotation of the second segment so we might cross the object boundary
-        Vec2d  p1 = paths.front().polyline.points.front().cast<double>();
-        Vec2d  p2 = paths.front().polyline.points[1].cast<double>();
+        Vec2d  p1 = paths.front().polyline.points.front().cast<double>().head<2>();
+        Vec2d  p2 = paths.front().polyline.points[1].cast<double>().head<2>();
         Vec2d  v  = p2 - p1;
         double nd = scale_(EXTRUDER_CONFIG(nozzle_diameter));
         double l2 = v.squaredNorm();
@@ -5870,19 +5883,20 @@ std::string GCode::extrude_loop(ExtrusionLoop loop, std::string description, dou
         if (nd * nd < l2)
             pt = (p1 + threshold * v * (nd / sqrt(l2))).cast<coord_t>();
         //Point pt = ((nd * nd >= l2) ? (p1+v*0.4): (p1 + 0.2 * v * (nd / sqrt(l2)))).cast<coord_t>();
-        pt.rotate(angle, paths.front().polyline.points.front());
+        const Point3 &center3 = paths.front().polyline.points.front();
+        pt.rotate(angle, Point(center3.x(), center3.y()));
         // generate the travel move
-        gcode += m_writer.extrude_to_xy(this->point_to_gcode(pt), 0,"move inwards before travel",true);
+        gcode += m_writer.extrude_to_xy(this->point_to_gcode(pt), 0, "move inwards before travel", true);
     }
 
     return gcode;
 }
 
-std::string GCode::extrude_multi_path(ExtrusionMultiPath multipath, std::string description, double speed)
+std::string GCode::extrude_multi_path(const ExtrusionMultiPath& multipath, const std::string& description, double speed)
 {
     // extrude along the path
     std::string gcode;
-    
+
     //Orca: calculate multipath average mm3_per_mm value over the length of the path.
     //This is used for adaptive PA
     m_multi_flow_segment_path_pa_set = false; // always emit PA on the first path of the multi-path
@@ -5899,8 +5913,8 @@ std::string GCode::extrude_multi_path(ExtrusionMultiPath multipath, std::string
     if (total_multipath_length > 0.0)
         m_multi_flow_segment_path_average_mm3_per_mm = weighted_sum_mm3_per_mm / total_multipath_length;
     // Orca: end of multipath average mm3_per_mm value calculation
-    
-    for (ExtrusionPath path : multipath.paths){
+
+    for (const ExtrusionPath &path : multipath.paths){
         gcode += this->_extrude(path, description, speed);
         // Orca: Adaptive PA - dont adapt PA after the first pultipath extrusion is completed
         // as we have already set the PA value to the average flow over the totality of the path
@@ -5911,13 +5925,15 @@ std::string GCode::extrude_multi_path(ExtrusionMultiPath multipath, std::string
     // BBS
     if (m_wipe.enable && FILAMENT_CONFIG(wipe)) {
         m_wipe.path = Polyline();
-        for (ExtrusionPath &path : multipath.paths) {
+        for (const ExtrusionPath &path : multipath.paths) {
             //BBS: Don't need to save duplicated point into wipe path
             if (!m_wipe.path.empty() && !path.empty() &&
-                m_wipe.path.last_point() == path.first_point())
-                m_wipe.path.append(path.polyline.points.begin() + 1, path.polyline.points.end());
-            else
-                m_wipe.path.append(path.polyline); // TODO: don't limit wipe to last path
+                m_wipe.path.last_point() == Point(path.first_point().x(), path.first_point().y())) {
+                // Convert Points3 to Points
+                for (auto it = path.polyline.points.begin() + 1; it != path.polyline.points.end(); ++it)
+                    m_wipe.path.append(Point(it->x(), it->y()));
+            } else
+                m_wipe.path.append(path.polyline.to_polyline()); // TODO: don't limit wipe to last path
         }
         m_wipe.path.reverse();
     }
@@ -5925,7 +5941,10 @@ std::string GCode::extrude_multi_path(ExtrusionMultiPath multipath, std::string
     return gcode;
 }
 
-std::string GCode::extrude_entity(const ExtrusionEntity &entity, std::string description, double speed, const ExtrusionEntitiesPtr& region_perimeters)
+std::string GCode::extrude_entity(const ExtrusionEntity&      entity,
+                                  const std::string&          description,
+                                  double                      speed,
+                                  const ExtrusionEntitiesPtr& region_perimeters)
 {
     if (const ExtrusionPath* path = dynamic_cast<const ExtrusionPath*>(&entity))
         return this->extrude_path(*path, description, speed);
@@ -5938,7 +5957,7 @@ std::string GCode::extrude_entity(const ExtrusionEntity &entity, std::string des
     return "";
 }
 
-std::string GCode::extrude_path(ExtrusionPath path, std::string description, double speed)
+std::string GCode::extrude_path(const ExtrusionPath& path, const std::string& description, double speed)
 {
     // Orca: Reset average multipath flow as this is a single line, single extrude volumetric speed path
     m_multi_flow_segment_path_pa_set = false;
@@ -5946,17 +5965,17 @@ std::string GCode::extrude_path(ExtrusionPath path, std::string description, dou
     //    description += ExtrusionEntity::role_to_string(path.role());
     std::string gcode = this->_extrude(path, description, speed);
     if (m_wipe.enable && FILAMENT_CONFIG(wipe)) {
-        m_wipe.path = path.polyline;
+        m_wipe.path = path.polyline.to_polyline();
         if (is_tree(this->config().support_type) && (path.role() == erSupportMaterial || path.role() == erSupportMaterialInterface || path.role() == erSupportTransition)) {
             if ((m_wipe.path.first_point() - m_wipe.path.last_point()).cast<double>().norm() > scale_(0.2)) {
                 double min_dist = scale_(0.2);
                 int    i        = 0;
                 for (; i < path.polyline.points.size(); i++) {
-                    double dist = (path.polyline.points[i] - path.last_point()).cast<double>().norm();
+                    double dist = (path.polyline.points[i] - path.last_point3()).cast<double>().norm();
                     if (dist < min_dist) min_dist = dist;
                     if (min_dist < scale_(0.2) && dist > min_dist) break;
                 }
-                m_wipe.path = Polyline(Points(path.polyline.points.begin() + i - 1, path.polyline.points.end()));
+                m_wipe.path = Polyline3(Points3(path.polyline.points.begin() + i - 1, path.polyline.points.end())).to_polyline();
             }
         } else
             m_wipe.path.reverse();
@@ -5999,11 +6018,11 @@ std::string GCode::extrude_infill(const Print &print, const std::vector<ObjectBy
                     extrusions.emplace_back(ee);
             if (! extrusions.empty()) {
                 m_config.apply(print.get_print_region(&region - &by_region.front()).config());
-                chain_and_reorder_extrusion_entities(extrusions, &m_last_pos);
+                chain_and_reorder_extrusion_entities(extrusions, m_last_pos.to_point());
                 for (const ExtrusionEntity *fill : extrusions) {
                     auto *eec = dynamic_cast<const ExtrusionEntityCollection*>(fill);
                     if (eec) {
-                        for (ExtrusionEntity *ee : eec->chained_path_from(m_last_pos).entities)
+                        for (ExtrusionEntity *ee : eec->chained_path_from(m_last_pos.to_point()).entities)
                             gcode += this->extrude_entity(*ee, extrusion_name);
                     } else
                         gcode += this->extrude_entity(*fill, extrusion_name);
@@ -6034,7 +6053,7 @@ std::string GCode::extrude_support(const ExtrusionEntityCollection &support_fill
         if (extrusions.empty())
             return gcode;
 
-        chain_and_reorder_extrusion_entities(extrusions, &m_last_pos);
+        chain_and_reorder_extrusion_entities(extrusions, m_last_pos.to_point());
 
         const double  support_speed            = m_config.support_speed.value;
         const double  support_interface_speed  = m_config.get_abs_value("support_interface_speed");
@@ -6200,14 +6219,19 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
     // Move to first point of extrusion path
     // path is 2D. But in slope lift case, lift z is done in travel_to function.
     // Add m_need_change_layer_lift_z when change_layer in case of no lift if m_last_pos is equal to path.first_point() by chance
-    if (!m_last_pos_defined || m_last_pos != path.first_point() || m_need_change_layer_lift_z || slope_need_z_travel) {
+    Point first_point = path.first_point();
+    if (!m_last_pos_defined || m_last_pos.to_point() != first_point || m_need_change_layer_lift_z || slope_need_z_travel) {
         const bool _last_pos_undefined = !m_last_pos_defined;
-        gcode += this->travel_to(
-            path.first_point(),
-            path.role(),
-            "move to first " + description + " point",
-            sloped == nullptr ? DBL_MAX : get_sloped_z(sloped->slope_begin.z_ratio)
-        );
+
+        double z = DBL_MAX;
+        if (sloped != nullptr) {
+            z =  get_sloped_z(sloped->slope_begin.z_ratio);
+        } else if (path.z_contoured && !path.polyline.lines().empty()) {
+            z = unscale_(path.polyline.lines().begin()->a.z()) + m_nominal_z;
+        }
+
+        gcode += this->travel_to(first_point, path.role(), "move to first " + description + " point", z);
+
         // Orca: ensure Z matches planned layer height
         if (!slope_need_z_travel && (_last_pos_undefined || m_need_change_layer_lift_z)) {
             const std::string z_sync_comment = _last_pos_undefined ?
@@ -6217,6 +6241,19 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
         m_need_change_layer_lift_z = false;
     }
 
+    if (path.z_contoured && !path.polyline.lines().empty()) {
+        double current_z = m_writer.get_position().z();
+        double first_z = unscale_(path.polyline.lines().begin()->a.z()) + m_nominal_z;
+        if (GCodeFormatter::quantize_xyzf(first_z) != GCodeFormatter::quantize_xyzf(current_z)) {
+            gcode += m_writer.travel_to_z(first_z, "set Z for contouring", true);
+        }
+    }
+    if (!path.z_contoured && sloped == nullptr) {
+        double current_z = m_writer.get_position().z();
+        if (GCodeFormatter::quantize_xyzf(current_z) != GCodeFormatter::quantize_xyzf(m_nominal_z)) {
+            gcode += this->writer().travel_to_z(m_nominal_z, "reset Z after contouring", true);
+        }
+    }
 
     // if needed, write the gcode_label_objects_end then gcode_label_objects_start
     // should be already done by travel_to, but just in case
@@ -6709,11 +6746,14 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
         assert(m_enable_cooling_markers);
 
         if (fan_on) {
-            if (!m_is_role_based_fan_on[role]) {
+            // Orca: CoolingBuffer consumes role fan markers per layer, so continuing
+            // role-based fan regions need a fresh START marker on each new layer.
+            if (!m_is_role_based_fan_on[role] || m_role_based_fan_marker_layer[role] != m_layer_index) {
                 gcode += ";";
                 gcode += marker_prefix;
                 gcode += "_FAN_START\n";
                 m_is_role_based_fan_on[role] = true;
+                m_role_based_fan_marker_layer[role] = m_layer_index;
             }
         } else {
             if (m_is_role_based_fan_on[role]) {
@@ -6721,6 +6761,7 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
                 gcode += marker_prefix;
                 gcode += "_FAN_END\n";
                 m_is_role_based_fan_on[role] = false;
+                m_role_based_fan_marker_layer[role] = -1;
             }
         }
     };
@@ -6803,10 +6844,12 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
             }
             // BBS: use G1 if not enable arc fitting or has no arc fitting result or in spiral_mode mode or we are doing sloped extrusion
             // Attention: G2 and G3 is not supported in spiral_mode mode
-            if (!m_config.enable_arc_fitting || path.polyline.fitting_result.empty() || m_config.spiral_mode || sloped != nullptr) {
+            if (!m_config.enable_arc_fitting || path.polyline.fitting_result.empty() || m_config.spiral_mode || sloped != nullptr || path.z_contoured) {
                 double path_length = 0.;
                 double total_length = sloped == nullptr ? 0. : path.polyline.length() * SCALING_FACTOR;
-                for (const Line& line : path.polyline.lines()) {
+                double saved_z      = m_writer.get_position().z();
+
+                for (const Line3& line : path.polyline.lines()) {
                     std::string tempDescription = description;
                     const double line_length = line.length() * SCALING_FACTOR;
                     if (line_length < EPSILON)
@@ -6821,16 +6864,35 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
                             tempDescription += Slic3r::format(" | Old Flow Value: %0.5f Length: %0.5f",oldE, line_length);
                         }
                     }
-                    if (sloped == nullptr) {
+                    if (path.z_contoured) {
+                        // ZAA: Z anti-aliased extrusion with variable Z per point
+                        Vec2d dest2d = this->point_to_gcode(line.b.to_point());
+                        coordf_t z_diff = unscale_(line.b.z());
+
+                        double extrusion_ratio = 1;
+                        if (path.role() != erIroning) {
+                            extrusion_ratio = (path.height + z_diff) / path.height;
+                        }
+
+                        double e = dE * extrusion_ratio;
+
+                        double z = m_nominal_z + z_diff;
+                        if (z < 0.1) {
+                            throw RuntimeError("GCode: very low z");
+                        }
+                        gcode += m_writer.extrude_to_xyz(Vec3d(dest2d.x(), dest2d.y(), z), e,
+                                                         GCodeWriter::full_gcode_comment ? tempDescription : "");
+
+                    } else if (sloped == nullptr) {
                         // Normal extrusion
                         gcode += m_writer.extrude_to_xy(
-                            this->point_to_gcode(line.b),
+                            this->point_to_gcode(line.b.to_point()),
                             dE,
                             GCodeWriter::full_gcode_comment ? tempDescription : "", path.is_force_no_extrusion());
                     } else {
                         // Sloped extrusion
                         const auto [z_ratio, e_ratio] = sloped->interpolate(path_length / total_length);
-                        Vec2d dest2d = this->point_to_gcode(line.b);
+                        Vec2d dest2d = this->point_to_gcode(line.b.to_point());
                         Vec3d dest3d(dest2d(0), dest2d(1), get_sloped_z(z_ratio));
                         gcode += m_writer.extrude_to_xyz(
                             dest3d,
@@ -6849,7 +6911,7 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
                         size_t end_index = fitting_result[fitting_index].end_point_index;
                         for (size_t point_index = start_index + 1; point_index < end_index + 1; point_index++) {
                             tempDescription = description;
-                            const Line line = Line(path.polyline.points[point_index - 1], path.polyline.points[point_index]);
+                            const Line line = Line(path.polyline.points[point_index - 1].to_point(), path.polyline.points[point_index].to_point());
                             const double line_length = line.length() * SCALING_FACTOR;
                             if (line_length < EPSILON)
                                 continue;
@@ -6907,14 +6969,14 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
         double total_length = 0;
         if (sloped != nullptr) {
             // Calculate total extrusion length
-            Points p;
+            Points3 p;
             p.reserve(new_points.size());
             std::transform(new_points.begin(), new_points.end(), std::back_inserter(p), [](const ProcessedPoint& pp) { return pp.p; });
-            Polyline l(p);
+            Polyline3 l(p);
             total_length = l.length() * SCALING_FACTOR;
         }
         gcode += m_writer.set_speed(last_set_speed, "", comment);
-        Vec2d prev = this->point_to_gcode_quantized(new_points[0].p);
+        Vec3d prev            = this->point_to_gcode_quantized(new_points[0].p);
         bool pre_fan_enabled = false;
         bool cur_fan_enabled = false;
         if( m_enable_cooling_markers && enable_overhang_bridge_fan)
@@ -6928,7 +6990,7 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
             std::string tempDescription = description;
             const ProcessedPoint &processed_point = new_points[i];
             const ProcessedPoint &pre_processed_point = new_points[i-1];
-            Vec2d p = this->point_to_gcode_quantized(processed_point.p);
+            Vec3d                 p                   = this->point_to_gcode_quantized(processed_point.p);
             if (m_enable_cooling_markers) {
                 if (enable_overhang_bridge_fan) {
                     cur_fan_enabled = check_overhang_fan(processed_point.overlap, path.role());
@@ -7010,9 +7072,26 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
                     tempDescription += Slic3r::format(" | Old Flow Value: %0.5f Length: %0.5f",oldE, line_length);
                 }
             }
-            if (sloped == nullptr) {
+            if (path.z_contoured) {
+                Vec2d    dest2d = p.head<2>();
+                coordf_t z_diff = unscale_(processed_point.p.z());
+
+                double extrusion_ratio = 1;
+                if (path.role() != erIroning) {
+                    extrusion_ratio = (path.height + z_diff) / path.height;
+                }
+
+                double e = dE * extrusion_ratio;
+
+                double z = m_nominal_z + z_diff;
+                if (z < 0.1) {
+                    throw RuntimeError("GCode: very low z");
+                }
+                gcode += m_writer.extrude_to_xyz(Vec3d(dest2d.x(), dest2d.y(), z), e,
+                                                 GCodeWriter::full_gcode_comment ? tempDescription : "");
+            } else if (sloped == nullptr) {
                 // Normal extrusion
-                gcode += m_writer.extrude_to_xy(p, dE, GCodeWriter::full_gcode_comment ? tempDescription : "");
+                gcode += m_writer.extrude_to_xy(p.head<2>(), dE, GCodeWriter::full_gcode_comment ? tempDescription : "");
             } else {
                 // Sloped extrusion
                 const auto [z_ratio, e_ratio] = sloped->interpolate(path_length / total_length);
@@ -7893,6 +7972,13 @@ Vec2d GCode::point_to_gcode(const Point &point) const
     return unscale(point) + m_origin - extruder_offset;
 }
 
+Vec3d GCode::point_to_gcode(const Point3& point) const
+{
+    Vec2d extruder_offset = EXTRUDER_CONFIG(extruder_offset);
+    Vec2d xy              = unscale(point.to_point()) + m_origin - extruder_offset;
+    return Vec3d(xy.x(), xy.y(), unscale_(point.z()));
+}
+
 // convert a model-space scaled point into G-code coordinates
 Point GCode::gcode_to_point(const Vec2d &point) const
 {
@@ -7910,6 +7996,11 @@ Vec2d GCode::point_to_gcode_quantized(const Point& point) const
     return { GCodeFormatter::quantize_xyzf(p.x()), GCodeFormatter::quantize_xyzf(p.y()) };
 }
 
+Vec3d GCode::point_to_gcode_quantized(const Point3& point) const
+{
+    Vec3d p = this->point_to_gcode(point);
+    return {GCodeFormatter::quantize_xyzf(p.x()), GCodeFormatter::quantize_xyzf(p.y()), GCodeFormatter::quantize_xyzf(p.z())};
+}
 
 // Goes through by_region std::vector and returns reference to a subvector of entities, that are to be printed
 // during infill/perimeter wiping, or normally (depends on wiping_entities parameter)

src/libslic3r/GCode.hpp

@@ -221,10 +221,12 @@ public:
     const Vec2d&    origin() const { return m_origin; }
     void            set_origin(const Vec2d &pointf);
     void            set_origin(const coordf_t x, const coordf_t y) { this->set_origin(Vec2d(x, y)); }
-    const Point&    last_pos() const { return m_last_pos; }
+    Point           last_pos() const { return m_last_pos.to_point(); }
     Vec2d           point_to_gcode(const Point &point) const;
+    Vec3d                    point_to_gcode(const Point3& point) const;
     Point           gcode_to_point(const Vec2d &point) const;
     Vec2d point_to_gcode_quantized(const Point& point) const;
+    Vec3d                    point_to_gcode_quantized(const Point3& point) const;
     const FullPrintConfig &config() const { return m_config; }
     const Layer*    layer() const { return m_layer; }
     GCodeWriter&    writer() { return m_writer; }
@@ -383,7 +385,8 @@ private:
     void check_placeholder_parser_failed();
     size_t get_extruder_id(unsigned int filament_id) const;
 
-    void            set_last_pos(const Point &pos) { m_last_pos = pos; m_last_pos_defined = true; }
+    void            set_last_pos(const Point &pos) { m_last_pos = Point3(pos, 0); m_last_pos_defined = true; }
+    void            set_last_pos(const Point3 &pos) { m_last_pos = pos; m_last_pos_defined = true; }
     bool            last_pos_defined() const { return m_last_pos_defined; }
     void            set_extruders(const std::vector<unsigned int> &extruder_ids);
     std::string     preamble();
@@ -391,13 +394,20 @@ private:
     std::string     change_layer(coordf_t print_z);
     // Orca: pass the complete collection of region perimeters to the extrude loop to check whether the wipe before external loop
     // should be executed
-    std::string     extrude_entity(const ExtrusionEntity &entity, std::string description = "", double speed = -1., const ExtrusionEntitiesPtr& region_perimeters = ExtrusionEntitiesPtr());
+    std::string extrude_entity(const ExtrusionEntity&      entity,
+                               const std::string&          description       = "",
+                               double                      speed             = -1.,
+                               const ExtrusionEntitiesPtr& region_perimeters = ExtrusionEntitiesPtr());
     // Orca: pass the complete collection of region perimeters to the extrude loop to check whether the wipe before external loop
     // should be executed
-    std::string     extrude_loop(ExtrusionLoop loop, std::string description, double speed = -1., const ExtrusionEntitiesPtr& region_perimeters = ExtrusionEntitiesPtr(), const Point* start_point = nullptr);
-    std::string     extrude_multi_path(ExtrusionMultiPath multipath, std::string description = "", double speed = -1.);
-    std::string     extrude_path(ExtrusionPath path, std::string description = "", double speed = -1.);
-    
+    std::string extrude_loop(const ExtrusionLoop&        loop,
+                             const std::string&          description,
+                             double                      speed             = -1.,
+                             const ExtrusionEntitiesPtr& region_perimeters = ExtrusionEntitiesPtr(),
+                             const Point*                start_point       = nullptr);
+    std::string extrude_multi_path(const ExtrusionMultiPath& multipath, const std::string& description = "", double speed = -1.);
+    std::string extrude_path(const ExtrusionPath& path, const std::string& description = "", double speed = -1.);
+
     // Orca: Adaptive PA variables
     // Used for adaptive PA when extruding paths with multiple, varying flow segments.
     // This contains the sum of the mm3_per_mm values weighted by the length of each path segment.
@@ -549,6 +559,7 @@ private:
     std::string _encode_label_ids_to_base64(std::vector<size_t> ids);
     // ORCA: Add support for role based fan speed control
     std::array<bool, ExtrusionRole::erCount> m_is_role_based_fan_on;
+    std::array<int, ExtrusionRole::erCount>  m_role_based_fan_marker_layer;
     // Markers for the Pressure Equalizer to recognize the extrusion type.
     // The Pressure Equalizer removes the markers from the final G-code.
     bool                                m_enable_extrusion_role_markers;
@@ -584,7 +595,7 @@ private:
     std::map<std::string, std::vector<std::string>> m_placeholder_error_messages;
 #endif
 
-    Point                               m_last_pos;
+    Point3                              m_last_pos;
     bool                                m_last_pos_defined;
 
     std::unique_ptr<CoolingBuffer>      m_cooling_buffer;

src/libslic3r/GCode/ConflictChecker.hpp

@@ -87,7 +87,7 @@ public:
         for (int i = b; i < e; ++i) {
             for (const ExtrusionPath &path : _piles[i].paths) {
                 if (path.is_force_no_extrusion() == false) {
-                    Polyline check_polyline = path.polyline;
+                    Polyline check_polyline = path.polyline.to_polyline();
                     check_polyline.translate(_offset);
                     Lines tmpLines = check_polyline.lines();
                     for (const Line &line : tmpLines) { lines.emplace_back(line, _id, path.role()); }

src/libslic3r/GCode/ExtrusionProcessor.hpp

@@ -27,19 +27,19 @@
 
 namespace Slic3r {
 
-struct ExtendedPoint
+template<int Dim> struct ExtendedPoint
 {
-    Vec2d position;
+    Eigen::Matrix<double, Dim, 1, Eigen::DontAlign> position;
     float distance;
     float curvature;
 };
 
 template<bool SCALED_INPUT, bool ADD_INTERSECTIONS, bool PREV_LAYER_BOUNDARY_OFFSET, bool SIGNED_DISTANCE, typename POINTS, typename L>
-std::vector<ExtendedPoint> estimate_points_properties(const POINTS                           &input_points,
-                                                      const AABBTreeLines::LinesDistancer<L> &unscaled_prev_layer,
-                                                      float                                   flow_width,
-                                                      float                                   max_line_length = -1.0f,
-                                                      float                                   min_distance = -1.0f)
+std::vector<ExtendedPoint<L::Dim>> estimate_points_properties(const POINTS&                           input_points,
+                                                              const AABBTreeLines::LinesDistancer<L>& unscaled_prev_layer,
+                                                              float                                   flow_width,
+                                                              float                                   max_line_length = -1.0f,
+                                                              float                                   min_distance    = -1.0f)
 {
     bool   looped     = input_points.front() == input_points.back();
     std::function<size_t(size_t,size_t)> get_prev_index = [](size_t idx, size_t count) {
@@ -78,35 +78,36 @@ std::vector<ExtendedPoint> estimate_points_properties(const POINTS
     double min_spacing = flow_width*0.25;
 
     using AABBScalar = typename AABBTreeLines::LinesDistancer<L>::Scalar;
+    using Vec        = Eigen::Matrix<double, L::Dim, 1, Eigen::DontAlign>;
     if (input_points.empty())
         return {};
     float boundary_offset = PREV_LAYER_BOUNDARY_OFFSET ? 0.5 * flow_width : 0.0f;
-    auto  maybe_unscale   = [](const P &p) { return SCALED_INPUT ? unscaled(p) : p.template cast<double>(); };
+    auto  maybe_unscale   = [](const P& p) -> Vec { return SCALED_INPUT ? unscaled(p) : p.template cast<double>(); };
 
-    std::vector<ExtendedPoint> points;
+    std::vector<ExtendedPoint<L::Dim>> points;
     points.reserve(input_points.size() * (ADD_INTERSECTIONS ? 1.5 : 1));
 
     {
-        ExtendedPoint start_point{maybe_unscale(input_points.front())};
-        auto [distance, nearest_line,
-              x] = unscaled_prev_layer.template distance_from_lines_extra<SIGNED_DISTANCE>(start_point.position.cast<AABBScalar>());
+        ExtendedPoint<L::Dim> start_point{maybe_unscale(input_points.front())};
+        auto [distance, nearest_line, x] = unscaled_prev_layer.template distance_from_lines_extra<SIGNED_DISTANCE>(
+            start_point.position.template cast<AABBScalar>());
         start_point.distance = distance + boundary_offset;
         points.push_back(start_point);
     }
     for (size_t i = 1; i < input_points.size(); i++) {
-        ExtendedPoint next_point{maybe_unscale(input_points[i])};
+        ExtendedPoint<L::Dim> next_point{maybe_unscale(input_points[i])};
         auto [distance, nearest_line,
-              x] = unscaled_prev_layer.template distance_from_lines_extra<SIGNED_DISTANCE>(next_point.position.cast<AABBScalar>());
+              x] = unscaled_prev_layer.template distance_from_lines_extra<SIGNED_DISTANCE>(next_point.position.template cast<AABBScalar>());
         next_point.distance = distance + boundary_offset;
 
         // Intersection handling
         if (ADD_INTERSECTIONS &&
             ((points.back().distance > boundary_offset + EPSILON) != (next_point.distance > boundary_offset + EPSILON))) {
-            const ExtendedPoint &prev_point    = points.back();
-            auto                 intersections = unscaled_prev_layer.template intersections_with_line<true>(
-                L{prev_point.position.cast<AABBScalar>(), next_point.position.cast<AABBScalar>()});
+            const ExtendedPoint<L::Dim>& prev_point    = points.back();
+            auto                         intersections = unscaled_prev_layer.template intersections_with_line<true>(
+                L{prev_point.position.template cast<AABBScalar>(), next_point.position.template cast<AABBScalar>()});
             for (const auto &intersection : intersections) {
-                ExtendedPoint p{};
+                ExtendedPoint<L::Dim> p{};
                 p.position = intersection.first.template cast<double>();
                 p.distance = boundary_offset;
                 // ORCA: Filter out points that are introduced at intersections if their distance from the previous or next point is not meaningful
@@ -121,12 +122,12 @@ std::vector<ExtendedPoint> estimate_points_properties(const POINTS
 
     // Segmentation handling
     if (PREV_LAYER_BOUNDARY_OFFSET && ADD_INTERSECTIONS) {
-        std::vector<ExtendedPoint> new_points;
+        std::vector<ExtendedPoint<L::Dim>> new_points;
         new_points.reserve(points.size() * 2);
         new_points.push_back(points.front());
         for (int point_idx = 0; point_idx < int(points.size()) - 1; ++point_idx) {
-            const ExtendedPoint &curr = points[point_idx];
-            const ExtendedPoint &next = points[point_idx + 1];
+            const ExtendedPoint<L::Dim>& curr = points[point_idx];
+            const ExtendedPoint<L::Dim>& next = points[point_idx + 1];
 
             if ((curr.distance > -boundary_offset && curr.distance < boundary_offset + 2.0f) ||
                 (next.distance > -boundary_offset && next.distance < boundary_offset + 2.0f)) {
@@ -144,10 +145,10 @@ std::vector<ExtendedPoint> estimate_points_properties(const POINTS
                     double t1 = std::max(a0, a1);
 
                     if (t0 < 1.0) {
-                        Vec2d p0     = curr.position + t0 * (next.position - curr.position);
-                        auto [p0_dist, p0_near_l,
-                              p0_x] = unscaled_prev_layer.template distance_from_lines_extra<SIGNED_DISTANCE>(p0.cast<AABBScalar>());
-                        ExtendedPoint new_p{};
+                        Vec p0                          = curr.position + t0 * (next.position - curr.position);
+                        auto [p0_dist, p0_near_l, p0_x] = unscaled_prev_layer.template distance_from_lines_extra<SIGNED_DISTANCE>(
+                            p0.template cast<AABBScalar>());
+                        ExtendedPoint<L::Dim> new_p{};
                         new_p.position = p0;
                         new_p.distance = float(p0_dist + boundary_offset);
                         // ORCA: only create a new point in the path if the new point overhang distance will be used to generate a speed change
@@ -161,10 +162,10 @@ std::vector<ExtendedPoint> estimate_points_properties(const POINTS
                         }
                     }
                     if (t1 > 0.0) {
-                        Vec2d p1     = curr.position + t1 * (next.position - curr.position);
-                        auto [p1_dist, p1_near_l,
-                              p1_x] = unscaled_prev_layer.template distance_from_lines_extra<SIGNED_DISTANCE>(p1.cast<AABBScalar>());
-                        ExtendedPoint new_p{};
+                        Vec p1                          = curr.position + t1 * (next.position - curr.position);
+                        auto [p1_dist, p1_near_l, p1_x] = unscaled_prev_layer.template distance_from_lines_extra<SIGNED_DISTANCE>(
+                            p1.template cast<AABBScalar>());
+                        ExtendedPoint<L::Dim> new_p{};
                         new_p.position = p1;
                         new_p.distance = float(p1_dist + boundary_offset);
                         // ORCA: only create a new point in the path if the new point overhang distance will be used to generate a speed change
@@ -186,21 +187,21 @@ std::vector<ExtendedPoint> estimate_points_properties(const POINTS
 
     // Maximum line length handling
     if (max_line_length > 0) {
-        std::vector<ExtendedPoint> new_points;
+        std::vector<ExtendedPoint<L::Dim>> new_points;
         new_points.reserve(points.size() * 2);
         {
             for (size_t i = 0; i + 1 < points.size(); i++) {
-                const ExtendedPoint &curr = points[i];
-                const ExtendedPoint &next = points[i + 1];
+                const ExtendedPoint<L::Dim>& curr = points[i];
+                const ExtendedPoint<L::Dim>& next = points[i + 1];
                 new_points.push_back(curr);
                 double len             = (next.position - curr.position).squaredNorm();
                 double t               = sqrt((max_line_length * max_line_length) / len);
                 size_t new_point_count = 1.0 / t;
                 for (size_t j = 1; j < new_point_count + 1; j++) {
-                    Vec2d pos  = curr.position * (1.0 - j * t) + next.position * (j * t);
+                    Vec pos    = curr.position * (1.0 - j * t) + next.position * (j * t);
                     auto [p_dist, p_near_l,
-                          p_x] = unscaled_prev_layer.template distance_from_lines_extra<SIGNED_DISTANCE>(pos.cast<AABBScalar>());
-                    ExtendedPoint new_p{};
+                          p_x] = unscaled_prev_layer.template distance_from_lines_extra<SIGNED_DISTANCE>(pos.template cast<AABBScalar>());
+                    ExtendedPoint<L::Dim> new_p{};
                     new_p.position = pos;
                     new_p.distance = float(p_dist + boundary_offset);
                     
@@ -219,8 +220,8 @@ std::vector<ExtendedPoint> estimate_points_properties(const POINTS
     float accumulated_distance = 0;
     std::vector<float> distances_for_curvature(points.size());
     for (size_t point_idx = 0; point_idx < points.size(); ++point_idx) {
-        const ExtendedPoint &a = points[point_idx];
-        const ExtendedPoint &b = points[get_prev_index(point_idx, points.size())];
+        const ExtendedPoint<L::Dim>& a = points[point_idx];
+        const ExtendedPoint<L::Dim>& b = points[get_prev_index(point_idx, points.size())];
 
         distances_for_curvature[point_idx] = (b.position - a.position).norm();
         accumulated_distance += distances_for_curvature[point_idx];
@@ -229,9 +230,9 @@ std::vector<ExtendedPoint> estimate_points_properties(const POINTS
     if (accumulated_distance > EPSILON)
         for (float window_size : {3.0f, 9.0f, 16.0f}) {
             for (int point_idx = 0; point_idx < int(points.size()); ++point_idx) {
-                ExtendedPoint &current = points[point_idx];
+                ExtendedPoint<L::Dim>& current = points[point_idx];
 
-                Vec2d back_position = current.position;
+                Vec back_position = current.position;
                 {
                     size_t back_point_index = point_idx;
                     float  dist_backwards   = 0;
@@ -251,7 +252,7 @@ std::vector<ExtendedPoint> estimate_points_properties(const POINTS
                     }
                 }
 
-                Vec2d front_position = current.position;
+                Vec front_position = current.position;
                 {
                     size_t front_point_index = point_idx;
                     float  dist_forwards     = 0;
@@ -271,7 +272,9 @@ std::vector<ExtendedPoint> estimate_points_properties(const POINTS
                     }
                 }
 
-                float new_curvature = angle(current.position - back_position, front_position - current.position) / window_size;
+                float new_curvature = angle((current.position - back_position).template head<2>(),
+                                            (front_position - current.position).template head<2>()) /
+                                      window_size;
                 if (abs(current.curvature) < abs(new_curvature)) {
                     current.curvature = new_curvature;
                 }
@@ -283,15 +286,15 @@ std::vector<ExtendedPoint> estimate_points_properties(const POINTS
 
 struct ProcessedPoint
 {
-    Point p;
+    Point3 p;
     float speed = 1.0f;
     float overlap = 1.0f;
 };
 
 class ExtrusionQualityEstimator
 {
-    std::unordered_map<const PrintObject *, AABBTreeLines::LinesDistancer<Linef>> prev_layer_boundaries;
-    std::unordered_map<const PrintObject *, AABBTreeLines::LinesDistancer<Linef>> next_layer_boundaries;
+    std::unordered_map<const PrintObject*, AABBTreeLines::LinesDistancer<Linef3>>      prev_layer_boundaries;
+    std::unordered_map<const PrintObject*, AABBTreeLines::LinesDistancer<Linef3>>      next_layer_boundaries;
     std::unordered_map<const PrintObject *, AABBTreeLines::LinesDistancer<CurledLine>> prev_curled_extrusions;
     std::unordered_map<const PrintObject *, AABBTreeLines::LinesDistancer<CurledLine>> next_curled_extrusions;
     const PrintObject                                                            *current_object;
@@ -304,7 +307,7 @@ public:
         if (layer == nullptr) return;
         const PrintObject *object = obj;
         prev_layer_boundaries[object] = next_layer_boundaries[object];
-        next_layer_boundaries[object] = AABBTreeLines::LinesDistancer<Linef>{to_unscaled_linesf(layer->lslices)};
+        next_layer_boundaries[object]  = AABBTreeLines::LinesDistancer<Linef3>{to_unscaled_linesf3(layer->lslices)};
         prev_curled_extrusions[object] = next_curled_extrusions[object];
         next_curled_extrusions[object] = AABBTreeLines::LinesDistancer<CurledLine>{layer->curled_lines};
     }
@@ -359,56 +362,54 @@ public:
             smallest_distance_with_lower_speed=-1.f;
 
         // Orca: Pass to the point properties estimator the smallest ovehang distance that triggers a slowdown (smallest_distance_with_lower_speed)
-        std::vector<ExtendedPoint> extended_points = estimate_points_properties<true, true, true, true>
-                                                                (path.polyline.points,
-                                                                 prev_layer_boundaries[current_object],
-                                                                 path.width,
-                                                                 -1,
-                                                                 smallest_distance_with_lower_speed);
+        std::vector<ExtendedPoint<3>> extended_points =
+            estimate_points_properties<true, true, true, true>(path.polyline.points, prev_layer_boundaries[current_object], path.width, -1,
+                                                               smallest_distance_with_lower_speed);
         const auto width_inv = 1.0f / path.width;
         std::vector<ProcessedPoint> processed_points;
         processed_points.reserve(extended_points.size());
         for (size_t i = 0; i < extended_points.size(); i++) {
-            const ExtendedPoint &curr = extended_points[i];
-            const ExtendedPoint &next = extended_points[i + 1 < extended_points.size() ? i + 1 : i];
-            
+            const ExtendedPoint<3>& curr = extended_points[i];
+            const ExtendedPoint<3>& next = extended_points[i + 1 < extended_points.size() ? i + 1 : i];
+
             float artificial_distance_to_curled_lines = 0.0;
             if(slowdown_for_curled_edges) {
             	// The following code artifically increases the distance to provide slowdown for extrusions that are over curled lines
             	const double dist_limit = 10.0 * path.width;
 				{
-				Vec2d middle = 0.5 * (curr.position + next.position);
-				auto line_indices = prev_curled_extrusions[current_object].all_lines_in_radius(Point::new_scale(middle), scale_(dist_limit));
-					if (!line_indices.empty()) {
-						double len   = (next.position - curr.position).norm();
-						// For long lines, there is a problem with the additional slowdown. If by accident, there is small curled line near the middle of this long line
+                    Vec3d middle       = 0.5 * (curr.position + next.position);
+                    auto  line_indices = prev_curled_extrusions[current_object].all_lines_in_radius(Point::new_scale(middle),
+                                                                                                    scale_(dist_limit));
+                    if (!line_indices.empty()) {
+                        double len = (next.position - curr.position).norm();
+                        // For long lines, there is a problem with the additional slowdown. If by accident, there is small curled line near the middle of this long line
                     	//  The whole segment gets slower unnecesarily. For these long lines, we do additional check whether it is worth slowing down.
                     	// NOTE that this is still quite rough approximation, e.g. we are still checking lines only near the middle point
                     	// TODO maybe split the lines into smaller segments before running this alg? but can be demanding, and GCode will be huge
                     	if (len > 2) {
-                        	Vec2d dir   = Vec2d(next.position - curr.position) / len;
-                        	Vec2d right = Vec2d(-dir.y(), dir.x());
+                            Vec2d dir   = Vec2d(next.position.head<2>() - curr.position.head<2>()) / len;
+                            Vec2d right = Vec2d(-dir.y(), dir.x());
 
-                        	Polygon box_of_influence = {
-                            	scaled(Vec2d(curr.position + right * dist_limit)),
-                            	scaled(Vec2d(next.position + right * dist_limit)),
-                            	scaled(Vec2d(next.position - right * dist_limit)),
-                            	scaled(Vec2d(curr.position - right * dist_limit)),
-                        	};
+                            Polygon box_of_influence = {
+                                scaled(Vec2d(curr.position.head<2>() + right * dist_limit)),
+                                scaled(Vec2d(next.position.head<2>() + right * dist_limit)),
+                                scaled(Vec2d(next.position.head<2>() - right * dist_limit)),
+                                scaled(Vec2d(curr.position.head<2>() - right * dist_limit)),
+                            };
 
-                        	double projected_lengths_sum = 0;
-                        	for (size_t idx : line_indices) {
-                            	const CurledLine &line   = prev_curled_extrusions[current_object].get_line(idx);
-                            	Lines             inside = intersection_ln({{line.a, line.b}}, {box_of_influence});
+                            double projected_lengths_sum = 0;
+                            for (size_t idx : line_indices) {
+                                const CurledLine& line   = prev_curled_extrusions[current_object].get_line(idx);
+                                Lines             inside = intersection_ln({{line.a, line.b}}, {box_of_influence});
                             	if (inside.empty())
                                 	continue;
                             	double projected_length = abs(dir.dot(unscaled(Vec2d((inside.back().b - inside.back().a).cast<double>()))));
                             	projected_lengths_sum += projected_length;
-                        	}
-                        	if (projected_lengths_sum < 0.4 * len) {
-                            	line_indices.clear();
-                        	}
-                    	}
+                            }
+                            if (projected_lengths_sum < 0.4 * len) {
+                                line_indices.clear();
+                            }
+                        }
                     
                     	for (size_t idx : line_indices) {
                         	const CurledLine &line                 = prev_curled_extrusions[current_object].get_line(idx);
@@ -418,9 +419,9 @@ public:
                                      (line.curled_height / (path.height * 10.0f)); // max_curled_height_factor from SupportSpotGenerator
                         	artificial_distance_to_curled_lines = std::max(artificial_distance_to_curled_lines, dist);
                     	}
-					}
-				}
-			}	
+                    }
+                }
+            }	
 
             auto calculate_speed = [&speed_sections, &original_speed](float distance) {
                 float final_speed;
@@ -452,8 +453,8 @@ public:
             }
             
             float overlap = std::min(1 - (curr.distance+artificial_distance_to_curled_lines) * width_inv, 1 - (next.distance+artificial_distance_to_curled_lines) * width_inv);
-			
-            processed_points.push_back({ scaled(curr.position), extrusion_speed, overlap });
+
+            processed_points.push_back({Point3(scaled(curr.position)), extrusion_speed, overlap});
         }
         return processed_points;
     }

src/libslic3r/GCode/PrintExtents.cpp

@@ -30,7 +30,7 @@ static inline BoundingBox extrusion_polyline_extents(const Polyline &polyline, c
 
 static inline BoundingBoxf extrusionentity_extents(const ExtrusionPath &extrusion_path)
 {
-    BoundingBox bbox = extrusion_polyline_extents(extrusion_path.polyline, coord_t(scale_(0.5 * extrusion_path.width)));
+    BoundingBox bbox = extrusion_polyline_extents(extrusion_path.polyline.to_polyline(), coord_t(scale_(0.5 * extrusion_path.width)));
     BoundingBoxf bboxf;
     if (! empty(bbox)) {
         bboxf.min = unscale(bbox.min);
@@ -44,7 +44,7 @@ static inline BoundingBoxf extrusionentity_extents(const ExtrusionLoop &extrusio
 {
     BoundingBox bbox;
     for (const ExtrusionPath &extrusion_path : extrusion_loop.paths)
-        bbox.merge(extrusion_polyline_extents(extrusion_path.polyline, coord_t(scale_(0.5 * extrusion_path.width))));
+        bbox.merge(extrusion_polyline_extents(extrusion_path.polyline.to_polyline(), coord_t(scale_(0.5 * extrusion_path.width))));
     BoundingBoxf bboxf;
     if (! empty(bbox)) {
         bboxf.min = unscale(bbox.min);
@@ -58,7 +58,7 @@ static inline BoundingBoxf extrusionentity_extents(const ExtrusionMultiPath &ext
 {
     BoundingBox bbox;
     for (const ExtrusionPath &extrusion_path : extrusion_multi_path.paths)
-        bbox.merge(extrusion_polyline_extents(extrusion_path.polyline, coord_t(scale_(0.5 * extrusion_path.width))));
+        bbox.merge(extrusion_polyline_extents(extrusion_path.polyline.to_polyline(), coord_t(scale_(0.5 * extrusion_path.width))));
     BoundingBoxf bboxf;
     if (! empty(bbox)) {
         bboxf.min = unscale(bbox.min);

src/libslic3r/GCode/SeamPlacer.cpp

@@ -1514,7 +1514,7 @@ void SeamPlacer::place_seam(const Layer *layer, ExtrusionLoop &loop,
       current.path_idx = next_idx_modulo(current.path_idx, loop.paths.size());
       current.segment_idx = 0;
     }
-    current.foot_pt = loop.paths[current.path_idx].polyline.points[current.segment_idx];
+    current.foot_pt = loop.paths[current.path_idx].polyline.points[current.segment_idx].to_point();
     return current;
   };
 
@@ -1527,7 +1527,7 @@ void SeamPlacer::place_seam(const Layer *layer, ExtrusionLoop &loop,
   size_t closest_perimeter_point_index = 0;
   { // local space for the closest_perimeter_point_index
     Perimeter *closest_perimeter = nullptr;
-    ExtrusionLoop::ClosestPathPoint closest_point{0,0,loop.paths[0].polyline.points[0]};
+    ExtrusionLoop::ClosestPathPoint closest_point{0, 0, loop.paths[0].polyline.points[0].to_point()};
     size_t points_count = std::accumulate(loop.paths.begin(), loop.paths.end(), 0, [](size_t acc,const ExtrusionPath& p) {
       return acc + p.polyline.points.size();
     });

src/libslic3r/GCodeWriter.cpp

@@ -929,6 +929,11 @@ std::string GCodeWriter::extrude_arc_to_xy(const Vec2d& point, const Vec2d& cent
 
 std::string GCodeWriter::extrude_to_xyz(const Vec3d &point, double dE, const std::string &comment, bool force_no_extrusion)
 {
+    // Check if Z actually changes (at export precision) before emitting it.
+    // ZAA sloped extrusions call this for every segment, but many consecutive
+    // segments share the same quantized Z — emitting it every time is redundant.
+    bool z_changed = (GCodeG1Formatter::quantize_xyzf(point(2)) != GCodeG1Formatter::quantize_xyzf(m_pos(2)));
+
     m_pos = point;
     m_lifted = 0;
     if (!force_no_extrusion)
@@ -938,7 +943,10 @@ std::string GCodeWriter::extrude_to_xyz(const Vec3d &point, double dE, const std
     Vec3d point_on_plate = { point(0) - m_x_offset, point(1) - m_y_offset, point(2) };
 
     GCodeG1Formatter w;
-    w.emit_xyz(point_on_plate);
+    if (z_changed)
+        w.emit_xyz(point_on_plate);
+    else
+        w.emit_xy(Vec2d(point_on_plate.x(), point_on_plate.y()));
     if (!force_no_extrusion)
         w.emit_e(filament()->E());
     //BBS

src/libslic3r/Layer.hpp

@@ -26,6 +26,10 @@ namespace FillLightning {
     class Generator;
 };
 
+namespace sla {
+    class IndexedMesh;
+};
+
 class LayerRegion
 {
 public:
@@ -191,6 +195,7 @@ public:
                                                                            FillAdaptive::Octree *support_fill_octree,
                                                                            FillLightning::Generator* lightning_generator) const;
     void 					make_ironing();
+    void                    make_contour_z(const sla::IndexedMesh &mesh);
 
     void                    export_region_slices_to_svg(const char *path) const;
     void                    export_region_fill_surfaces_to_svg(const char *path) const;

src/libslic3r/LayerRegion.cpp

@@ -3,6 +3,7 @@
 #include "ClipperUtils.hpp"
 #include "Geometry.hpp"
 #include "PerimeterGenerator.hpp"
+#include "Point.hpp"
 #include "Print.hpp"
 #include "Surface.hpp"
 #include "BoundingBox.hpp"

src/libslic3r/Line.hpp

@@ -224,17 +224,28 @@ using CurledLines = std::vector<CurledLine>;
 class Line3
 {
 public:
-    Line3() : a(Vec3crd::Zero()), b(Vec3crd::Zero()) {}
-    Line3(const Vec3crd& _a, const Vec3crd& _b) : a(_a), b(_b) {}
+    Line3() : a(Point3()), b(Point3()) {}
+    Line3(const Point3& _a, const Point3& _b) : a(_a), b(_b) {}
+    // Backward compatibility with Vec3crd
+    Line3(const Vec3crd& _a, const Vec3crd& _b) : a(Point3(_a)), b(Point3(_b)) {}
 
     double  length() const { return (this->a - this->b).cast<double>().norm(); }
-    Vec3crd vector() const { return this->b - this->a; }
+    Point3 vector() const { Vec3crd v = this->b - this->a; return Point3(v.x(), v.y(), v.z()); }
+    Point3 midpoint() const { return Point3((this->a.x() + this->b.x()) / 2, (this->a.y() + this->b.y()) / 2, (this->a.z() + this->b.z()) / 2); }
 
-    Vec3crd a;
-    Vec3crd b;
+    // Convert to 2D line by dropping Z coordinate
+    Line to_line() const { return Line(this->a.to_point(), this->b.to_point()); }
+
+    static inline double distance_to_squared(const Point3& point, const Point3& a, const Point3& b)
+    {
+        return line_alg::distance_to_squared(Line3{a, b}, Vec<3, coord_t>{point});
+    }
+
+    Point3 a;
+    Point3 b;
 
     static const constexpr int Dim = 3;
-    using Scalar = Vec3crd::Scalar;
+    using Scalar = coord_t;
 };
 
 class Linef
@@ -243,6 +254,10 @@ public:
     Linef() : a(Vec2d::Zero()), b(Vec2d::Zero()) {}
     Linef(const Vec2d& _a, const Vec2d& _b) : a(_a), b(_b) {}
 
+    Vec2d   vector() const { return this->b - this->a; }
+    Vec2d   unit_vector() const { return (length() == 0.0) ? Vec2d::Zero() : vector().normalized(); }
+    double  length() const { return vector().norm(); }
+
     Vec2d a;
     Vec2d b;
 
@@ -256,6 +271,7 @@ class Linef3
 public:
     Linef3() : a(Vec3d::Zero()), b(Vec3d::Zero()) {}
     Linef3(const Vec3d& _a, const Vec3d& _b) : a(_a), b(_b) {}
+    Linef3(const Vec2d& _a, const Vec2d& _b, double z) : a(Vec3d(_a.x(), _a.y(), z)), b(Vec3d(_b.x(), _b.y(), z)) {}
 
     Vec3d   intersect_plane(double z) const;
     void    scale(double factor) { this->a *= factor; this->b *= factor; }
@@ -263,6 +279,32 @@ public:
     Vec3d   unit_vector() const { return (length() == 0.0) ? Vec3d::Zero() : vector().normalized(); }
     double  length() const { return vector().norm(); }
 
+    double distance_to_infinite_squared(const Vec3d &point, Vec3d *closest_point) const {
+        const Vec3d v  = this->b - this->a;
+        const Vec3d va = point - this->a;
+        const double l2 = v.squaredNorm();
+        if (l2 == 0.) {
+            // a == b case
+            *closest_point = this->a;
+            return va.squaredNorm();
+        }
+        // Consider the line extending the segment, parameterized as a + t (b - a).
+        // Find parameter value t of the projection of point onto the line.
+        const double t = va.dot(v) / l2;
+        *closest_point = this->a + t * v;
+        return (point - *closest_point).squaredNorm();
+    }
+
+    double distance_to_infinite_squared(const Vec3d &point) const {
+        Vec3d nearest_point;
+        return distance_to_infinite_squared(point, &nearest_point);
+    }
+
+    static inline double distance_to_infinite_squared(const Vec3d &point, const Vec3d &a, const Vec3d &b) {
+        Linef3 line{a, b};
+        return line.distance_to_infinite_squared(point);
+    }
+
     Vec3d a;
     Vec3d b;
 
@@ -270,6 +312,8 @@ public:
     using Scalar = Vec3d::Scalar;
 };
 
+using Linesf3 = std::vector<Linef3>;
+
 BoundingBox get_extents(const Lines &lines);
 
 } // namespace Slic3r

src/libslic3r/MultiPoint.cpp

@@ -422,32 +422,23 @@ Points MultiPoint::concave_hull_2d(const Points& pts, const double tolerence)
     return min_distance;
 }
 
-
-void MultiPoint3::translate(double x, double y)
+void MultiPoint3::translate(const Point3& v)
 {
-    for (Vec3crd &p : points) {
-        p(0) += coord_t(x);
-        p(1) += coord_t(y);
-    }
-}
-
-void MultiPoint3::translate(const Point& vector)
-{
-    this->translate(vector(0), vector(1));
+    for (Point3& pt : points)
+        pt += v;
 }
 
 double MultiPoint3::length() const
 {
-    double len = 0.0;
-    for (const Line3& line : this->lines())
-        len += line.length();
+    const Lines3& lines = this->lines();
+    double        len   = 0;
+    for (auto it = lines.cbegin(); it != lines.cend(); ++it) {
+        len += it->length();
+    }
     return len;
 }
 
-BoundingBox3 MultiPoint3::bounding_box() const
-{
-    return BoundingBox3(points);
-}
+BoundingBox3 MultiPoint3::bounding_box() const { return BoundingBox3(this->points); }
 
 bool MultiPoint3::remove_duplicate_points()
 {
@@ -471,6 +462,75 @@ bool MultiPoint3::remove_duplicate_points()
     return false;
 }
 
+// Douglas-Peucker simplification for 3D points
+Points3 MultiPoint3::_douglas_peucker(const Points3& pts, double tolerance)
+{
+    Points3 result_pts;
+    double  tolerance_sq = tolerance * tolerance;
+    if (!pts.empty()) {
+        const Point3* anchor      = &pts.front();
+        size_t        anchor_idx  = 0;
+        const Point3* floater     = &pts.back();
+        size_t        floater_idx = pts.size() - 1;
+        result_pts.reserve(pts.size());
+        result_pts.emplace_back(*anchor);
+        if (anchor_idx != floater_idx) {
+            assert(pts.size() > 1);
+            std::vector<size_t> dpStack;
+            dpStack.reserve(pts.size());
+            dpStack.emplace_back(floater_idx);
+            for (;;) {
+                double max_dist_sq  = 0.0;
+                size_t furthest_idx = anchor_idx;
+                // find point furthest from line seg created by (anchor, floater) and note it
+                for (size_t i = anchor_idx + 1; i < floater_idx; ++i) {
+                    double dist_sq = Line3::distance_to_squared(pts[i], *anchor, *floater);
+                    if (dist_sq > max_dist_sq) {
+                        max_dist_sq  = dist_sq;
+                        furthest_idx = i;
+                    }
+                }
+                // remove point if less than tolerance
+                if (max_dist_sq <= tolerance_sq) {
+                    result_pts.emplace_back(*floater);
+                    anchor_idx = floater_idx;
+                    anchor     = floater;
+                    assert(dpStack.back() == floater_idx);
+                    dpStack.pop_back();
+                    if (dpStack.empty())
+                        break;
+                    floater_idx = dpStack.back();
+                } else {
+                    floater_idx = furthest_idx;
+                    dpStack.emplace_back(floater_idx);
+                }
+                floater = &pts[floater_idx];
+            }
+        }
+        assert(result_pts.front() == pts.front());
+        assert(result_pts.back() == pts.back());
+
+#if 0
+        {
+            static int iRun = 0;
+			BoundingBox bbox(pts);
+			BoundingBox bbox2(result_pts);
+			bbox.merge(bbox2);
+            SVG svg(debug_out_path("douglas_peucker_%d.svg", iRun ++).c_str(), bbox);
+            if (pts.front() == pts.back())
+                svg.draw(Polygon(pts), "black");
+            else
+                svg.draw(Polyline(pts), "black");
+            if (result_pts.front() == result_pts.back())
+                svg.draw(Polygon(result_pts), "green", scale_(0.1));
+            else
+                svg.draw(Polyline(result_pts), "green", scale_(0.1));
+        }
+#endif
+    }
+    return result_pts;
+}
+
 BoundingBox get_extents(const MultiPoint &mp)
 { 
     return BoundingBox(mp.points);
@@ -514,4 +574,78 @@ void MultiPoint::symmetric_y(const coord_t &x_axis)
     }
 }
 
+// MultiPoint3 implementations
+void MultiPoint3::rotate(double cos_angle, double sin_angle)
+{
+    for (Point3 &pt : this->points) {
+        double cur_x = double(pt(0));
+        double cur_y = double(pt(1));
+        pt(0) = coord_t(round(cos_angle * cur_x - sin_angle * cur_y));
+        pt(1) = coord_t(round(cos_angle * cur_y + sin_angle * cur_x));
+        // Keep Z unchanged
+    }
+}
+
+void MultiPoint3::rotate(double angle, const Point3 &center)
+{
+    double s = sin(angle);
+    double c = cos(angle);
+    for (Point3 &pt : points) {
+        Vec3crd v(pt - center);
+        pt(0) = (coord_t)round(double(center(0)) + c * v[0] - s * v[1]);
+        pt(1) = (coord_t)round(double(center(1)) + c * v[1] + s * v[0]);
+        // Keep Z unchanged from original point
+    }
+}
+
+int MultiPoint3::find_point(const Point &point) const
+{
+    for (const Point3 &pt : this->points)
+        if (pt.to_point() == point)
+            return int(&pt - &this->points.front());
+    return -1;  // not found
+}
+
+int MultiPoint3::find_point(const Point &point, double scaled_epsilon) const
+{
+    if (scaled_epsilon == 0) return this->find_point(point);
+
+    auto dist2_min = std::numeric_limits<double>::max();
+    auto eps2      = scaled_epsilon * scaled_epsilon;
+    int  idx_min   = -1;
+    for (const Point3 &pt : this->points) {
+        double d2 = (pt.to_point() - point).cast<double>().squaredNorm();
+        if (d2 < dist2_min) {
+            idx_min   = int(&pt - &this->points.front());
+            dist2_min = d2;
+        }
+    }
+    return (dist2_min < eps2) ? idx_min : -1;
+}
+
+int MultiPoint3::find_point(const Point3 &point) const
+{
+    for (const Point3 &pt : this->points)
+        if (pt == point)
+            return int(&pt - &this->points.front());
+    return -1;  // not found
+}
+
+int MultiPoint3::find_point(const Point3 &point, double scaled_epsilon) const
+{
+    if (scaled_epsilon == 0) return this->find_point(point);
+
+    auto dist2_min = std::numeric_limits<double>::max();
+    auto eps2      = scaled_epsilon * scaled_epsilon;
+    int  idx_min   = -1;
+    for (const Point3 &pt : this->points) {
+        double d2 = (pt - point).cast<double>().squaredNorm();
+        if (d2 < dist2_min) {
+            idx_min   = int(&pt - &this->points.front());
+            dist2_min = d2;
+        }
+    }
+    return (dist2_min < eps2) ? idx_min : -1;
+}
+
 }

src/libslic3r/MultiPoint.hpp

@@ -119,18 +119,50 @@ class MultiPoint3
 public:
     Points3 points;
 
-    void append(const Vec3crd& point) { this->points.push_back(point); }
+    void append(const Point3& point) { this->points.push_back(point); }
+    void append(const Vec3crd& point) { this->points.push_back(Point3(point)); }
+    void append(const Points3::const_iterator& begin, const Points3::const_iterator& end)
+    {
+        this->points.insert(this->points.end(), begin, end);
+    }
+
+    void translate(double x, double y, double z = 0) { this->translate(Point3(coord_t(x), coord_t(y), coord_t(z))); }
+    void translate(const Point3& vector);
+    void reverse() { std::reverse(this->points.begin(), this->points.end()); }
+    void rotate(double angle) { this->rotate(cos(angle), sin(angle)); }
+    void rotate(double cos_angle, double sin_angle);
+    void rotate(double angle, const Point3 &center);
+
+    Point3& first_point() { return this->points.front(); }
+    Point3& last_point() { return this->points.back(); }
+    const Point3& first_point() const { return this->points.front(); }
+    const Point3& last_point() const { return this->points.back(); }
+    size_t size() const { return this->points.size(); }
+    bool empty() const { return this->points.empty(); }
+    void clear() { this->points.clear(); }
+
+    auto begin() { return this->points.begin(); }
+    auto end() { return this->points.end(); }
+    auto begin() const { return this->points.begin(); }
+    auto end() const { return this->points.end(); }
 
-    void translate(double x, double y);
-    void translate(const Point& vector);
     virtual Lines3 lines() const = 0;
     double length() const;
     bool is_valid() const { return this->points.size() >= 2; }
 
     BoundingBox3 bounding_box() const;
 
+    // Find a point in the points array
+    int find_point(const Point &point) const;
+    int find_point(const Point &point, const double scaled_epsilon) const;
+    int find_point(const Point3 &point) const;
+    int find_point(const Point3 &point, const double scaled_epsilon) const;
+
     // Remove exact duplicates, return true if any duplicate has been removed.
     bool remove_duplicate_points();
+
+    // Douglas-Peucker simplification
+    static Points3 _douglas_peucker(const Points3 &points, double tolerance);
 };
 
 extern BoundingBox get_extents(const MultiPoint &mp);

src/libslic3r/PerimeterGenerator.cpp

@@ -206,7 +206,8 @@ static ExtrusionEntityCollection traverse_loops(const PerimeterGenerator &perime
             // Reapply the nearest point search for starting point.
             // We allow polyline reversal because Clipper may have randomly reversed polylines during clipping.
             if(paths.empty()) continue;
-            chain_and_reorder_extrusion_paths(paths, &paths.front().first_point());
+            Point start_pt = Point(paths.front().first_point().x(), paths.front().first_point().y());
+            chain_and_reorder_extrusion_paths(paths, &start_pt);
         } else {
             if (overhangs_reverse && perimeter_generator.layer_id > perimeter_generator.object_config->raft_layers) {
                 // Always reverse if detect overhang wall is not enabled
@@ -216,7 +217,7 @@ static ExtrusionEntityCollection traverse_loops(const PerimeterGenerator &perime
 
             ExtrusionPath path(role);
             //BBS.
-            path.polyline = polygon.split_at_first_point();
+            path.polyline = Polyline3(polygon.split_at_first_point());
             path.mm3_per_mm = extrusion_mm3_per_mm;
             path.width = extrusion_width;
             path.height     = (float)perimeter_generator.layer_height;
@@ -441,7 +442,7 @@ static ExtrusionEntityCollection traverse_extrusions(const PerimeterGenerator& p
                     Polylines be_clipped;
 
                     for (const ExtrusionPath &p : it.second) {
-                        be_clipped.emplace_back(std::move(p.polyline));
+                        be_clipped.emplace_back(p.polyline.to_polyline());
                     }
 
                     BoundingBox extrusion_bboxs = get_extents(be_clipped);
@@ -475,11 +476,13 @@ static ExtrusionEntityCollection traverse_extrusions(const PerimeterGenerator& p
                     };
                     std::unordered_map<Point, PointInfo, PointHash> point_occurrence;
                     for (const ExtrusionPath& path : paths) {
-                        ++point_occurrence[path.polyline.first_point()].occurrence;
-                        ++point_occurrence[path.polyline.last_point()].occurrence;
+                        Point first_p = path.polyline.first_point().to_point();
+                        Point last_p  = path.polyline.last_point().to_point();
+                        ++point_occurrence[first_p].occurrence;
+                        ++point_occurrence[last_p].occurrence;
                         if (path.role() == erOverhangPerimeter) {
-                            point_occurrence[path.polyline.first_point()].is_overhang = true;
-                            point_occurrence[path.polyline.last_point()].is_overhang = true;
+                            point_occurrence[first_p].is_overhang = true;
+                            point_occurrence[last_p].is_overhang = true;
                         }
                     }
 
@@ -674,11 +677,17 @@ bool paths_touch(const ExtrusionPath &path_one, const ExtrusionPath &path_two, d
 {
     AABBTreeLines::LinesDistancer<Line> lines_two{path_two.as_polyline().lines()};
     for (size_t pt_idx = 0; pt_idx < path_one.polyline.size(); pt_idx++) {
-        if (lines_two.distance_from_lines<false>(path_one.polyline.points[pt_idx]) < limit_distance) { return true; }
+        Point pt = path_one.polyline.points[pt_idx].to_point();
+        if (lines_two.distance_from_lines<false>(pt) < limit_distance) {
+            return true;
+        }
     }
     AABBTreeLines::LinesDistancer<Line> lines_one{path_one.as_polyline().lines()};
     for (size_t pt_idx = 0; pt_idx < path_two.polyline.size(); pt_idx++) {
-        if (lines_one.distance_from_lines<false>(path_two.polyline.points[pt_idx]) < limit_distance) { return true; }
+        Point pt = path_two.polyline.points[pt_idx].to_point();
+        if (lines_one.distance_from_lines<false>(pt) < limit_distance) {
+            return true;
+        }
     }
     return false;
 }
@@ -1032,7 +1041,7 @@ std::tuple<std::vector<ExtrusionPaths>, Polygons> generate_extra_perimeters_over
                 // polyline)
                 bool first_overhang_is_closed_and_anchored =
                     (overhang_region.front().first_point() == overhang_region.front().last_point() &&
-                     !intersection_pl(overhang_region.front().polyline, optimized_lower_slices).empty());
+                     !intersection_pl(overhang_region.front().polyline.to_polyline(), optimized_lower_slices).empty());
                      
                 auto is_anchored = [&lower_layer_aabb_tree](const ExtrusionPath &path) {
                     return lower_layer_aabb_tree.distance_from_lines<true>(path.first_point()) <= 0 ||
@@ -1044,7 +1053,7 @@ std::tuple<std::vector<ExtrusionPaths>, Polygons> generate_extra_perimeters_over
                     size_t min_dist_idx = 0;
                     double min_dist = std::numeric_limits<double>::max();
                     for (size_t i = 0; i < overhang_region.front().polyline.size(); i++) {
-                        Point p = overhang_region.front().polyline[i];
+                        Point p = overhang_region.front().polyline.points[i].to_point();
                         if (double d = lower_layer_aabb_tree.distance_from_lines<true>(p) < min_dist) {
                             min_dist = d;
                             min_dist_idx = i;

src/libslic3r/Point.cpp

@@ -1,6 +1,8 @@
 #include "Point.hpp"
+#include "Exception.hpp"
 #include "Line.hpp"
 #include "MultiPoint.hpp"
+#include "Polyline.hpp"
 #include "Int128.hpp"
 #include "BoundingBox.hpp"
 #include <algorithm>
@@ -257,4 +259,91 @@ int cross(const Vec2crd &v1, const Vec2crd &v2)
 
 }
 
+// Point3 utility functions for ZAA (Z Anti-Aliasing)
+Polyline to_polyline(const Points &points) { return Polyline(points); }
+Polyline3 to_polyline(const Points3 &points) { return Polyline3(points); }
+
+Points to_points(const Points3 &points3) {
+    Points points2;
+    points2.reserve(points3.size());
+    for (const Point3 &pt : points3) {
+        points2.emplace_back(pt.to_point());
+    }
+    return points2;
+}
+
+Points3 to_points3(const Points& points)
+{
+    Points3 points3;
+    points3.reserve(points.size());
+    for (const Point& pt : points) {
+        points3.emplace_back(pt);
+    }
+    return points3;
+}
+
+// Point3 method implementations
+void Point3::rotate(double angle, const Point3 &center) {
+    Vec3crd diff = *this - center;
+    Point3 temp(diff.x(), diff.y(), diff.z());
+    temp.rotate(angle);
+    Vec3crd sum = temp + center;
+    *this = Point3(sum.x(), sum.y(), sum.z());
+}
+
+int Point3::nearest_point_index(const Points &points) const {
+    return this->to_point().nearest_point_index(points);
+}
+
+bool Point3::nearest_point(const Points &points, Point3* point) const {
+    Point pt2d;
+    bool result = this->to_point().nearest_point(points, &pt2d);
+    if (result && point) {
+        *point = Point3(pt2d, this->z());
+    }
+    return result;
+}
+
+double Point3::ccw(const Point3 &p1, const Point3 &p2) const {
+    return this->to_point().ccw(p1.to_point(), p2.to_point());
+}
+
+double Point3::ccw(const Line3 &line) const {
+    // Convert to 2D and use existing Point ccw implementation
+    Point a2d(line.a.x(), line.a.y());
+    Point b2d(line.b.x(), line.b.y());
+    return this->to_point().ccw(Line(a2d, b2d));
+}
+
+double Point3::ccw_angle(const Point3 &p1, const Point3 &p2) const {
+    return this->to_point().ccw_angle(p1.to_point(), p2.to_point());
+}
+
+Point3 Point3::projection_onto(const MultiPoint3 &poly) const {
+    // TODO: Implement proper 3D projection when MultiPoint3 conversion methods are ready
+    // For now, stub implementation
+    throw RuntimeError("Point3::projection_onto(MultiPoint3) not implemented yet");
+    return *this;
+}
+
+Point3 Point3::projection_onto(const Line3 &line) const {
+    // Project in 2D plane and interpolate Z
+    Point pt2d = this->to_point();
+    Point line_a(line.a.x(), line.a.y());
+    Point line_b(line.b.x(), line.b.y());
+    Line line2d(line_a, line_b);
+    Point proj2d = pt2d.projection_onto(line2d);
+
+    // Interpolate Z coordinate
+    double line_len = line.length();
+    if (line_len < EPSILON) {
+        return Point3(proj2d, line.a.z());
+    }
+    double dist_from_a = (proj2d - line_a).cast<double>().norm();
+    double t = dist_from_a / line_len;
+    t = std::clamp(t, 0.0, 1.0);
+    coord_t z = coord_t(line.a.z() + t * (line.b.z() - line.a.z()));
+    return Point3(proj2d, z);
+}
+
 }

src/libslic3r/Point.hpp

@@ -21,8 +21,13 @@ namespace Slic3r {
 class BoundingBox;
 class BoundingBoxf;
 class Line;
+class Line3;
 class MultiPoint;
+class MultiPoint3;
 class Point;
+class Point3;
+class Polyline;
+class Polyline3;
 using Vector = Point;
 
 // Base template for eigen derived vectors
@@ -57,7 +62,7 @@ using PointsAllocator = tbb::scalable_allocator<BaseType>;
 using Points         = std::vector<Point, PointsAllocator<Point>>;
 using PointPtrs      = std::vector<Point*>;
 using PointConstPtrs = std::vector<const Point*>;
-using Points3        = std::vector<Vec3crd>;
+using Points3         = std::vector<Point3, PointsAllocator<Point3>>;
 using Pointfs        = std::vector<Vec2d>;
 using Vec2ds         = std::vector<Vec2d>;
 using Pointf3s       = std::vector<Vec3d>;
@@ -79,6 +84,12 @@ using Transform2d    = Eigen::Transform<double, 2, Eigen::Affine, Eigen::DontAli
 using Transform3f    = Eigen::Transform<float,  3, Eigen::Affine, Eigen::DontAlign>;
 using Transform3d    = Eigen::Transform<double, 3, Eigen::Affine, Eigen::DontAlign>;
 
+// Utility functions for Point/Polyline conversion
+Polyline to_polyline(const Points &points);
+Polyline3 to_polyline(const Points3 &points);
+Points to_points(const Points3 &points);
+Points3   to_points3(const Points& points);
+
 // using ColorRGBA      = std::array<float, 4>;
 // I don't know why Eigen::Transform::Identity() return a const object...
 template<int N, class T> Transform<N, T> identity() { return Transform<N, T>::Identity(); }
@@ -258,6 +269,118 @@ inline Point operator* (const Point& l, const double& r)
     return { coord_t(l.x() * r), coord_t(l.y() * r) };
 }
 
+// Point3 class - 3D point with Z coordinate for non-planar printing (ZAA)
+class Point3 : public Vec3crd {
+public:
+    using coord_type = coord_t;
+
+    Point3() : Vec3crd(0, 0, 0) {}
+    Point3(int32_t x, int32_t y, int32_t z = 0) : Vec3crd(coord_t(x), coord_t(y), coord_t(z)) {}
+    Point3(int64_t x, int64_t y, int64_t z = 0) : Vec3crd(coord_t(x), coord_t(y), coord_t(z)) {}
+    Point3(double x, double y, double z = 0.0) : Vec3crd(coord_t(std::round(x)), coord_t(std::round(y)), coord_t(std::round(z))) {}
+    Point3(const Point3 &rhs) { *this = rhs; }
+    explicit Point3(const Vec2crd& vec2crd, coord_t z = 0) : Vec3crd(vec2crd.x(), vec2crd.y(), z) {}
+    explicit Point3(const Vec3crd &vec3crd) : Vec3crd(vec3crd) {}
+    // This constructor allows you to construct Point from Eigen expressions
+    template<typename OtherDerived>
+    explicit Point3(const Eigen::MatrixBase<OtherDerived> &other) : Vec3crd(other) {}
+
+    static Point3 new_scale(coordf_t x, coordf_t y, coordf_t z) {
+        return Point3(coord_t(scale_(x)), coord_t(scale_(y)), coord_t(scale_(z)));
+    }
+    static Point3 new_scale(const Vec3d &v) {
+        return Point3(coord_t(scale_(v.x())), coord_t(scale_(v.y())), coord_t(scale_(v.z())));
+    }
+    static Point3 new_scale(const Vec3f &v) {
+        return Point3(coord_t(scale_(v.x())), coord_t(scale_(v.y())), coord_t(scale_(v.z())));
+    }
+
+    // Assignment operator for Eigen expressions
+    template<typename OtherDerived>
+    Point3& operator=(const Eigen::MatrixBase<OtherDerived> &other)
+    {
+        this->Vec3crd::operator=(other);
+        return *this;
+    }
+
+    Point3& operator+=(const Point3& rhs) { this->x() += rhs.x(); this->y() += rhs.y(); this->z() += rhs.z(); return *this; }
+    Point3& operator-=(const Point3& rhs) { this->x() -= rhs.x(); this->y() -= rhs.y(); this->z() -= rhs.z(); return *this; }
+    Point3& operator*=(const double &rhs) {
+        this->x() = coord_t(this->x() * rhs);
+        this->y() = coord_t(this->y() * rhs);
+        this->z() = coord_t(this->z() * rhs);
+        return *this;
+    }
+    Point3 operator*(const double &rhs) const { return Point3(this->x() * rhs, this->y() * rhs, this->z() * rhs); }
+
+    bool both_comp(const Point3 &rhs, const std::string& op) {
+        if (op == ">")
+            return this->x() > rhs.x() && this->y() > rhs.y();
+        else if (op == "<")
+            return this->x() < rhs.x() && this->y() < rhs.y();
+        return false;
+    }
+    bool any_comp(const Point3 &rhs, const std::string &op)
+    {
+        if (op == ">")
+            return this->x() > rhs.x() || this->y() > rhs.y();
+        else if (op == "<")
+            return this->x() < rhs.x() || this->y() < rhs.y();
+        return false;
+    }
+    bool any_comp(const coord_t val, const std::string &op)
+    {
+        if (op == ">")
+            return this->x() > val || this->y() > val;
+        else if (op == "<")
+            return this->x() < val || this->y() < val;
+        return false;
+    }
+
+    void rotate(double angle) { this->rotate(std::cos(angle), std::sin(angle)); }
+    void rotate(double cos_a, double sin_a) {
+        double cur_x = (double)this->x();
+        double cur_y = (double)this->y();
+        this->x() = (coord_t)round(cos_a * cur_x - sin_a * cur_y);
+        this->y() = (coord_t)round(cos_a * cur_y + sin_a * cur_x);
+    }
+    void rotate(double angle, const Point3 &center);
+
+    Point3 rotated(double angle) const { Point3 res(*this); res.rotate(angle); return res; }
+    Point3 rotated(double cos_a, double sin_a) const { Point3 res(*this); res.rotate(cos_a, sin_a); return res; }
+    Point3 rotated(double angle, const Point3 &center) const { Point3 res(*this); res.rotate(angle, center); return res; }
+    Point3 rotate_90_degree_ccw() const { return Point3(-this->y(), this->x(), this->z()); }
+
+    int nearest_point_index(const Points &points) const;
+    bool nearest_point(const Points &points, Point3* point) const;
+    double ccw(const Point3 &p1, const Point3 &p2) const;
+    double ccw(const Line3 &line) const;
+    double ccw_angle(const Point3 &p1, const Point3 &p2) const;
+    Point3 projection_onto(const MultiPoint3 &poly) const;
+    Point3 projection_onto(const Line3 &line) const;
+
+    // Convert to 2D Point by dropping Z coordinate
+    Point to_point() const {
+        return Point(this->x(), this->y());
+    }
+
+    double distance_to(const Point3 &point) const { return (point - *this).cast<double>().norm(); }
+};
+
+// Utility function to convert Points3 to Points
+inline void append_points(Points &dst, const Points3 &src) {
+    std::transform(src.begin(), src.end(),
+        std::back_inserter(dst),
+        [](const Point3 &pt) {
+            return pt.to_point();
+        });
+}
+
+inline Point3 operator* (const Point3& l, const double& r)
+{
+    return { coord_t(l.x() * r), coord_t(l.y() * r), coord_t(l.z() * r) };
+}
+
 inline std::ostream &operator<<(std::ostream &os, const Point &pt)
 {
     os << unscale_(pt.x()) << "," << unscale_(pt.y());
@@ -300,6 +423,12 @@ inline Point lerp(const Point &a, const Point &b, double t)
     return ((1. - t) * a.cast<double>() + t * b.cast<double>()).cast<coord_t>();
 }
 
+inline Point3 lerp(const Point3& a, const Point3& b, double t)
+{
+    assert((t >= -EPSILON) && (t <= 1. + EPSILON));
+    return Point3(((1. - t) * a.cast<double>() + t * b.cast<double>()).cast<coord_t>());
+}
+
 // if IncludeBoundary, then a bounding box is defined even for a single point.
 // otherwise a bounding box is only defined if it has a positive area.
 template<bool IncludeBoundary = false>

src/libslic3r/Polygon.cpp

@@ -38,6 +38,9 @@ Polyline Polygon::split_at_vertex(const Point &point) const
 Polyline Polygon::split_at_index(int index) const
 {
     Polyline polyline;
+    if (this->points.empty())
+        return polyline;
+
     polyline.points.reserve(this->points.size() + 1);
     for (Points::const_iterator it = this->points.begin() + index; it != this->points.end(); ++it)
         polyline.points.push_back(*it);

src/libslic3r/Polyline.cpp

@@ -612,6 +612,28 @@ std::pair<int, Point> foot_pt(const Points &polyline, const Point &pt)
     return std::make_pair(int(it_proj - polyline.begin()) - 1, foot_pt_min);
 }
 
+std::pair<int, Point3> foot_pt(const Points3 &polyline, const Point3 &pt)
+{
+    if (polyline.size() < 2) return std::make_pair(-1, Point3(0, 0, 0));
+
+    auto   d2_min = std::numeric_limits<double>::max();
+    Point3 foot_pt_min;
+    Point3 prev    = polyline.front();
+    auto   it      = polyline.begin();
+    auto   it_proj = polyline.begin();
+    for (++it; it != polyline.end(); ++it) {
+        Point3 foot_pt = pt.projection_onto(Line3(prev, *it));
+        double d2      = (foot_pt - pt).cast<double>().squaredNorm();
+        if (d2 < d2_min) {
+            d2_min      = d2;
+            foot_pt_min = foot_pt;
+            it_proj     = it;
+        }
+        prev = *it;
+    }
+    return std::make_pair(int(it_proj - polyline.begin()) - 1, foot_pt_min);
+}
+
 ThickLines ThickPolyline::thicklines() const
 {
     ThickLines lines;
@@ -639,15 +661,383 @@ void ThickPolyline::start_at_index(int index)
 Lines3 Polyline3::lines() const
 {
     Lines3 lines;
-    if (points.size() >= 2)
-    {
-        lines.reserve(points.size() - 1);
-        for (Points3::const_iterator it = points.begin(); it != points.end() - 1; ++it)
-        {
+    if (this->points.size() >= 2) {
+        lines.reserve(this->points.size() - 1);
+        for (Points3::const_iterator it = this->points.begin(); it != this->points.end() - 1; ++it) {
             lines.emplace_back(*it, *(it + 1));
         }
     }
     return lines;
 }
 
+Polyline Polyline3::to_polyline() const
+{
+    Polyline out;
+    out.points.reserve(this->points.size());
+    for (const Point3 &point : this->points) {
+        out.points.emplace_back(point.x(), point.y());
+    }
+    return out;
+}
+
+void Polyline3::clip_end(double distance)
+{
+    bool   last_point_inserted = false;
+    size_t remove_after_index  = MultiPoint3::size();
+    while (distance > 0) {
+        Vec3d last_point = this->last_point().cast<double>();
+        this->points.pop_back();
+        remove_after_index--;
+        if (this->points.empty()) {
+            this->fitting_result.clear();
+            return;
+        }
+        Vec3d  v    = this->last_point().cast<double>() - last_point;
+        double lsqr = v.squaredNorm();
+        if (lsqr > distance * distance) {
+            this->points.emplace_back((last_point + v * (distance / sqrt(lsqr))).cast<coord_t>());
+            last_point_inserted = true;
+            break;
+        }
+        distance -= sqrt(lsqr);
+    }
+
+    // BBS: don't need to clip fitting result if it's empty
+    if (fitting_result.empty())
+        return;
+    while (!fitting_result.empty() && fitting_result.back().start_point_index >= remove_after_index)
+        fitting_result.pop_back();
+    if (!fitting_result.empty()) {
+        // BBS: last remaining segment is arc move, then clip the arc at last point
+        if (fitting_result.back().path_type == EMovePathType::Arc_move_ccw ||
+            fitting_result.back().path_type == EMovePathType::Arc_move_cw) {
+            if (fitting_result.back().arc_data.clip_end(this->last_point().to_point()))
+                // BBS: succeed to clip arc, then update the last point
+                // TODO: fix z parameter
+                this->points.back() = Point3(fitting_result.back().arc_data.end_point, this->points.back().z());
+            else
+                // BBS: Failed to clip arc, then back to linear move
+                fitting_result.back().path_type = EMovePathType::Linear_move;
+        }
+        fitting_result.back().end_point_index = this->points.size() - 1;
+    }
+}
+
+void Polyline3::simplify(double tolerance)
+{
+    this->points = MultiPoint3::_douglas_peucker(this->points, tolerance);
+    this->fitting_result.clear();
+}
+
+void Polyline3::simplify_by_fitting_arc(double tolerance)
+{
+    // BBS: do arc fit first, then use DP simplify to handle the straight part to reduce point.
+    Points points_2d = to_points(this->points);
+    ArcFitter::do_arc_fitting_and_simplify(points_2d, this->fitting_result, tolerance);
+    this->points = to_points3(points_2d);
+}
+
+void Polyline3::reverse()
+{
+    // BBS: reverse points
+    MultiPoint3::reverse();
+    // BBS: reverse the fitting_result
+    if (!this->fitting_result.empty()) {
+        for (size_t i = 0; i < this->fitting_result.size(); i++) {
+            std::swap(fitting_result[i].start_point_index, fitting_result[i].end_point_index);
+            fitting_result[i].start_point_index = MultiPoint3::size() - 1 - fitting_result[i].start_point_index;
+            fitting_result[i].end_point_index   = MultiPoint3::size() - 1 - fitting_result[i].end_point_index;
+            if (fitting_result[i].is_arc_move())
+                fitting_result[i].reverse_arc_path();
+        }
+        std::reverse(this->fitting_result.begin(), this->fitting_result.end());
+    }
+}
+
+bool Polyline3::split_at_index(const size_t index, Polyline3 *p1, Polyline3 *p2) const
+{
+    if (index > this->size() - 1)
+        return false;
+
+    if (index == 0) {
+        p1->clear();
+        p1->append(this->first_point());
+        *p2 = *this;
+    } else if (index == this->size() - 1) {
+        p2->clear();
+        p2->append(this->last_point());
+        *p1 = *this;
+    } else {
+        // BBS: spilit first part
+        p1->clear();
+        p1->points.reserve(index + 1);
+        p1->points.insert(p1->begin(), this->begin(), this->begin() + index + 1);
+        Point3 new_endpoint;
+        if (this->split_fitting_result_before_index(index, new_endpoint, p1->fitting_result))
+            p1->points.back() = new_endpoint;
+
+        p2->clear();
+        p2->points.reserve(this->size() - index);
+        p2->points.insert(p2->begin(), this->begin() + index, this->end());
+        Point3 new_startpoint;
+        if (this->split_fitting_result_after_index(index, new_startpoint, p2->fitting_result))
+            p2->points.front() = new_startpoint;
+    }
+    return true;
+}
+
+void Polyline3::append(const Point3& point)
+{
+    // // Don't append if same as last point
+    // if (!this->empty() && this->last_point() == point)
+    //     return;
+
+    // this->points.push_back(point);
+    // append_fitting_result_after_append_points();
+
+    // BBS: don't need to append same point
+    if (!this->empty() && this->last_point() == point)
+        return;
+    MultiPoint3::append(point);
+    append_fitting_result_after_append_points();
+}
+
+void Polyline3::append(const Polyline3& src)
+{
+    if (!src.is_valid()) return;
+
+    if (this->points.empty()) {
+        this->points = src.points;
+        this->fitting_result = src.fitting_result;
+    } else {
+        // BBS: append the first point to create connection first, update the fitting date as well
+        this->append(src.points[0]);
+        // BBS: append a polyline which has fitting data to a polyline without fitting data.
+        // Then create a fake fitting data first, so that we can keep the fitting data in last polyline
+        if (this->fitting_result.empty() && !src.fitting_result.empty()) {
+            this->fitting_result.emplace_back(PathFittingData{0, this->points.size() - 1, EMovePathType::Linear_move, ArcSegment()});
+        }
+        // BBS: then append the remain points
+        MultiPoint3::append(src.points.begin() + 1, src.points.end());
+        // BBS: finally append the fitting data
+        append_fitting_result_after_append_polyline(src);
+    }
+}
+
+void Polyline3::append_before(const Point3& point)
+{
+    // BBS: don't need to append same point
+    if (!this->empty() && this->first_point() == point)
+        return;
+    if (this->size() == 1) {
+        this->fitting_result.clear();
+        MultiPoint3::append(point);
+        MultiPoint3::reverse();
+    } else {
+        this->reverse();
+        this->append(point);
+        this->reverse();
+    }
+}
+
+void Polyline3::split_at(Point& point, Polyline3* p1, Polyline3* p2) const
+{
+    if (this->points.empty()) return;
+
+    // 0 judge whether the point is on the polyline
+    int index = this->find_point(point);
+    if (index != -1) {
+        // BBS: the spilit point is on the polyline, then easy
+        split_at_index(index, p1, p2);
+        point = p1->is_valid() ? p1->last_point().to_point() : p2->first_point().to_point();
+        return;
+    }
+
+    // 1 find the line to split at
+    size_t line_idx = 0;
+    Point p = this->first_point().to_point();
+    double min = (p - point).cast<double>().norm();
+    Lines3 lines = this->lines();
+    for (Lines3::const_iterator line = lines.begin(); line != lines.end(); ++line) {
+        Point p_tmp = point.projection_onto(line->to_line());
+        if ((p_tmp - point).cast<double>().norm() < min) {
+            p        = p_tmp;
+            min      = (p - point).cast<double>().norm();
+            line_idx = line - lines.begin();
+        }
+    }
+
+    // 2 judge whether the cloest point is one vertex of polyline.
+    //   and spilit the polyline at different index
+    index = this->find_point(p);
+    if (index != -1) {
+        this->split_at_index(index, p1, p2);
+        p1->append(Point3(point, p1->last_point().z()));
+        p2->append_before(Point3(point, p2->first_point().z()));
+    } else {
+        Polyline3 temp;
+        this->split_at_index(line_idx, p1, &temp);
+        p1->append(Point3(point, p1->last_point().z()));
+        this->split_at_index(line_idx + 1, &temp, p2);
+        p2->append_before(Point3(point, p2->first_point().z()));
+    }
+}
+
+void Polyline3::split_at(Point3 &point, Polyline3* p1, Polyline3* p2) const {
+    Point p = point.to_point();
+    this->split_at(p, p1, p2);
+    point = Point3(p, point.z());
+}
+
+bool Polyline3::split_at_length(const double length, Polyline3 *p1, Polyline3 *p2) const {
+    if (this->points.empty()) return false;
+    if (length < 0 || length > this->length()) {
+        return false;
+    }
+
+    if (length < SCALED_EPSILON) {
+        p1->clear();
+        p1->append(this->first_point());
+        *p2 = *this;
+    } else if (is_approx(length, this->length(), SCALED_EPSILON)) {
+        p2->clear();
+        p2->append(this->last_point());
+        *p1 = *this;
+    } else {
+        // 1 find the line to split at
+        size_t line_idx = 0;
+        double acc_length = 0;
+        Point3 p          = this->first_point();
+        for (const auto& l : this->lines()) {
+            p = l.b;
+
+            const double current_length = l.length();
+            if (acc_length + current_length >= length) {
+                p = lerp(l.a, l.b, (length - acc_length) / current_length);
+                break;
+            }
+            acc_length += current_length;
+            line_idx++;
+        }
+
+        // 2 judge whether the cloest point is one vertex of polyline.
+        //   and spilit the polyline at different index
+        int index = this->find_point(p);
+        if (index != -1) {
+            this->split_at_index(index, p1, p2);
+        } else {
+            Polyline3 temp;
+            this->split_at_index(line_idx, p1, &temp);
+            p1->append(p);
+            this->split_at_index(line_idx + 1, &temp, p2);
+            p2->append_before(p);
+        }
+    }
+    return true;
+}
+
+bool Polyline3::split_fitting_result_before_index(size_t index, Point3& new_endpoint, std::vector<PathFittingData>& data) const
+{
+    data.clear();
+    new_endpoint = this->points[index];
+    if (!this->fitting_result.empty()) {
+        // BBS: max size
+        data.reserve(this->fitting_result.size());
+        // BBS: save fitting result before index
+        for (size_t i = 0; i < this->fitting_result.size(); i++) {
+            if (this->fitting_result[i].start_point_index < index)
+                data.push_back(this->fitting_result[i]);
+            else
+                break;
+        }
+
+        if (!data.empty()) {
+            // BBS: need to clip the arc and generate new end point
+            if (data.back().is_arc_move() && data.back().end_point_index > index) {
+                if (!data.back().arc_data.clip_end(this->points[index].to_point()))
+                    // BBS: failed to clip arc, then return to be linear move
+                    data.back().path_type = EMovePathType::Linear_move;
+                else
+                    // BBS: succeed to clip arc, then update and return the new end point
+                    new_endpoint = Point3(data.back().arc_data.end_point, 0);
+            }
+            data.back().end_point_index = index;
+        }
+        data.shrink_to_fit();
+        return true;
+    }
+    return false;
+}
+
+bool Polyline3::split_fitting_result_after_index(size_t index, Point3& new_startpoint, std::vector<PathFittingData>& data) const
+{
+    data.clear();
+    new_startpoint = this->points[index];
+    if (!this->fitting_result.empty()) {
+        data.reserve(this->fitting_result.size());
+        for (size_t i = 0; i < this->fitting_result.size(); i++) {
+            if (this->fitting_result[i].end_point_index > index)
+                data.push_back(this->fitting_result[i]);
+        }
+        if (!data.empty()) {
+            for (size_t i = 0; i < data.size(); i++) {
+                if (i != 0) {
+                    data[i].start_point_index -= index;
+                    data[i].end_point_index -= index;
+                } else {
+                    data[i].end_point_index -= index;
+                    // BBS: need to clip the arc and generate new start point
+                    if (data.front().is_arc_move() && data.front().start_point_index < index) {
+                        if (!data.front().arc_data.clip_start(this->points[index].to_point()))
+                            // BBS: failed to clip arc, then return to be linear move
+                            data.front().path_type = EMovePathType::Linear_move;
+                        else
+                            // BBS: succeed to clip arc, then update and return the new start point
+                            new_startpoint = Point3(data.front().arc_data.start_point, 0);
+                    }
+                    data[i].start_point_index = 0;
+                }
+            }
+        }
+        data.shrink_to_fit();
+        return true;
+    }
+    return false;
+}
+
+void Polyline3::append_fitting_result_after_append_points()
+{
+    if (!fitting_result.empty()) {
+        if (fitting_result.back().is_linear_move()) {
+            fitting_result.back().end_point_index = this->points.size() - 1;
+        } else {
+            size_t new_start = fitting_result.back().end_point_index;
+            size_t new_end   = this->points.size() - 1;
+            if (new_start != new_end)
+                fitting_result.emplace_back(PathFittingData{new_start, new_end, EMovePathType::Linear_move, ArcSegment()});
+        }
+    }
+}
+
+void Polyline3::append_fitting_result_after_append_polyline(const Polyline3& src)
+{
+    if (!this->fitting_result.empty()) {
+        // BBS: offset and save the fitting_result from src polyline
+        if (!src.fitting_result.empty()) {
+            size_t old_size     = this->fitting_result.size();
+            size_t index_offset = this->fitting_result.back().end_point_index;
+            this->fitting_result.insert(this->fitting_result.end(), src.fitting_result.begin(), src.fitting_result.end());
+            for (size_t i = old_size; i < this->fitting_result.size(); i++) {
+                this->fitting_result[i].start_point_index += index_offset;
+                this->fitting_result[i].end_point_index += index_offset;
+            }
+        } else {
+            // BBS: the append polyline has no fitting data, then append as linear move directly
+            size_t new_start = this->fitting_result.back().end_point_index;
+            size_t new_end   = this->size() - 1;
+            if (new_start != new_end)
+                this->fitting_result.emplace_back(PathFittingData{new_start, new_end, EMovePathType::Linear_move, ArcSegment()});
+        }
+    }
+}
 }

src/libslic3r/Polyline.hpp

@@ -251,6 +251,7 @@ bool remove_degenerate(Polylines &polylines);
 
 // Returns index of a segment of a polyline and foot point of pt on polyline.
 std::pair<int, Point> foot_pt(const Points &polyline, const Point &pt);
+std::pair<int, Point3> foot_pt(const Points3 &polyline, const Point3 &pt);
 
 class ThickPolyline : public Polyline {
 public:
@@ -290,7 +291,63 @@ inline ThickPolylines to_thick_polylines(Polylines&& polylines, const coordf_t w
 class Polyline3 : public MultiPoint3
 {
 public:
+    Polyline3() {}
+    explicit Polyline3(const Points3 &points) { this->points = points; }
+    explicit Polyline3(const Polyline &poly, coord_t z = 0) {
+        this->points.reserve(poly.points.size());
+        for (const Point &pt : poly.points) {
+            this->points.emplace_back(pt.x(), pt.y(), z);
+        }
+    }
+
     virtual Lines3 lines() const;
+
+    // Convert to 2D Polyline by dropping Z coordinates
+    Polyline to_polyline() const;
+
+    // Clip the end of the polyline by a distance
+    void clip_end(double distance);
+
+    // Simplify polyline using Douglas-Peucker algorithm
+    void simplify(double tolerance);
+
+    // Simplify by arc fitting (for ZAA arc fitting support)
+    void simplify_by_fitting_arc(double tolerance);
+
+    // Reverse the polyline
+    void reverse();
+
+    // Split polyline at given index
+    bool split_at_index(const size_t index, Polyline3 *p1, Polyline3 *p2) const;
+
+    // Split polyline at a given point (2D)
+    void split_at(Point &point, Polyline3* p1, Polyline3* p2) const;
+
+    // Split polyline at a given point (3D)
+    void split_at(Point3 &point, Polyline3* p1, Polyline3* p2) const;
+
+    // Split polyline at a given length
+    bool split_at_length(const double length, Polyline3 *p1, Polyline3 *p2) const;
+
+    // Append a single point
+    void append(const Point3& point);
+
+    // Append another Polyline3
+    void append(const Polyline3& src);
+
+    // Append before (prepend)
+    void append_before(const Point3& point);
+
+    // Arc fitting support - fitting_result stores arc path data
+    // This is populated by simplify_by_fitting_arc()
+    // Uses the global PathFittingData from ArcFitter.hpp
+    std::vector<PathFittingData> fitting_result;
+
+private:
+    void append_fitting_result_after_append_points();
+    void append_fitting_result_after_append_polyline(const Polyline3& src);
+    bool split_fitting_result_before_index(size_t index, Point3& new_endpoint, std::vector<PathFittingData>& result) const;
+    bool split_fitting_result_after_index(size_t index, Point3& new_startpoint, std::vector<PathFittingData>& result) const;
 };
 
 typedef std::vector<Polyline3> Polylines3;

src/libslic3r/Preset.cpp

@@ -974,16 +974,74 @@ bool Preset::has_cali_lines(PresetBundle* preset_bundle)
     return false;
 }
 
-static std::vector<std::string> s_Preset_print_options {
-    "layer_height", "initial_layer_print_height", "wall_loops", "alternate_extra_wall", "slice_closing_radius", "spiral_mode", "spiral_mode_smooth", "spiral_mode_max_xy_smoothing", "spiral_starting_flow_ratio", "spiral_finishing_flow_ratio", "slicing_mode",
-    "top_shell_layers", "top_shell_thickness", "top_surface_density", "bottom_surface_density", "bottom_shell_layers", "bottom_shell_thickness",
-    "extra_perimeters_on_overhangs", "ensure_vertical_shell_thickness", "reduce_crossing_wall", "detect_thin_wall", "detect_overhang_wall", "overhang_reverse", "overhang_reverse_threshold","overhang_reverse_internal_only", "wall_direction",
-    "seam_position", "staggered_inner_seams", "wall_sequence", "is_infill_first", "sparse_infill_density","fill_multiline", "sparse_infill_pattern", "lateral_lattice_angle_1", "lateral_lattice_angle_2", "infill_overhang_angle", "top_surface_pattern", "bottom_surface_pattern",
-    "infill_direction", "solid_infill_direction", "counterbore_hole_bridging","infill_shift_step", "sparse_infill_rotate_template", "solid_infill_rotate_template", "symmetric_infill_y_axis","skeleton_infill_density", "infill_lock_depth", "skin_infill_depth", "skin_infill_density",
-    "align_infill_direction_to_model", "extra_solid_infills",
-    "minimum_sparse_infill_area", "reduce_infill_retraction","internal_solid_infill_pattern","gap_fill_target",
-    "ironing_type", "ironing_pattern", "ironing_flow", "ironing_speed", "ironing_spacing", "ironing_angle", "ironing_angle_fixed", "ironing_inset",
-    "support_ironing", "support_ironing_pattern", "support_ironing_flow", "support_ironing_spacing",
+static std::vector<std::string> s_Preset_print_options{
+    "layer_height",
+    "initial_layer_print_height",
+    "wall_loops",
+    "alternate_extra_wall",
+    "slice_closing_radius",
+    "spiral_mode",
+    "spiral_mode_smooth",
+    "spiral_mode_max_xy_smoothing",
+    "spiral_starting_flow_ratio",
+    "spiral_finishing_flow_ratio",
+    "slicing_mode",
+    "top_shell_layers",
+    "top_shell_thickness",
+    "top_surface_density",
+    "bottom_surface_density",
+    "bottom_shell_layers",
+    "bottom_shell_thickness",
+    "extra_perimeters_on_overhangs",
+    "ensure_vertical_shell_thickness",
+    "reduce_crossing_wall",
+    "detect_thin_wall",
+    "detect_overhang_wall",
+    "overhang_reverse",
+    "overhang_reverse_threshold",
+    "overhang_reverse_internal_only",
+    "wall_direction",
+    "seam_position",
+    "staggered_inner_seams",
+    "wall_sequence",
+    "is_infill_first",
+    "sparse_infill_density",
+    "fill_multiline",
+    "sparse_infill_pattern",
+    "lateral_lattice_angle_1",
+    "lateral_lattice_angle_2",
+    "infill_overhang_angle",
+    "top_surface_pattern",
+    "bottom_surface_pattern",
+    "infill_direction",
+    "solid_infill_direction",
+    "counterbore_hole_bridging",
+    "infill_shift_step",
+    "sparse_infill_rotate_template",
+    "solid_infill_rotate_template",
+    "symmetric_infill_y_axis",
+    "skeleton_infill_density",
+    "infill_lock_depth",
+    "skin_infill_depth",
+    "skin_infill_density",
+    "align_infill_direction_to_model",
+    "extra_solid_infills",
+    "minimum_sparse_infill_area",
+    "reduce_infill_retraction",
+    "internal_solid_infill_pattern",
+    "gap_fill_target",
+    "ironing_type",
+    "ironing_pattern",
+    "ironing_flow",
+    "ironing_speed",
+    "ironing_spacing",
+    "ironing_angle",
+    "ironing_angle_fixed",
+    "ironing_inset",
+    "support_ironing",
+    "support_ironing_pattern",
+    "support_ironing_flow",
+    "support_ironing_spacing",
     "max_travel_detour_distance",
     "fuzzy_skin", "fuzzy_skin_thickness", "fuzzy_skin_point_distance", "fuzzy_skin_first_layer", "fuzzy_skin_noise_type", "fuzzy_skin_mode", "fuzzy_skin_scale", "fuzzy_skin_octaves", "fuzzy_skin_persistence",
     "max_volumetric_extrusion_rate_slope", "max_volumetric_extrusion_rate_slope_segment_length","extrusion_rate_smoothing_external_perimeter_only",
@@ -995,54 +1053,220 @@ static std::vector<std::string> s_Preset_print_options {
     "raft_layers", "raft_first_layer_density", "raft_first_layer_expansion", "raft_contact_distance", "raft_expansion",
     "support_base_pattern", "support_base_pattern_spacing", "support_expansion", "support_style",
     // BBS
-    "print_extruder_id", "print_extruder_variant",
+    "print_extruder_id",
+    "print_extruder_variant",
     "independent_support_layer_height",
-    "support_angle", "support_interface_top_layers", "support_interface_bottom_layers",
-    "support_interface_pattern", "support_interface_spacing", "support_interface_loop_pattern",
-    "support_top_z_distance", "support_on_build_plate_only","support_critical_regions_only", "bridge_no_support", "thick_bridges", "thick_internal_bridges","dont_filter_internal_bridges","enable_extra_bridge_layer", "max_bridge_length", "print_sequence", "print_order", "support_remove_small_overhang",
-    "filename_format", "wall_filament", "support_bottom_z_distance",
-    "sparse_infill_filament", "solid_infill_filament", "support_filament", "support_interface_filament","support_interface_not_for_body",
-    "ooze_prevention", "standby_temperature_delta", "preheat_time","preheat_steps", "interface_shells", "line_width", "initial_layer_line_width", "inner_wall_line_width",
-    "outer_wall_line_width", "sparse_infill_line_width", "internal_solid_infill_line_width",
-    "skin_infill_line_width","skeleton_infill_line_width",
-    "top_surface_line_width", "support_line_width", "infill_wall_overlap","top_bottom_infill_wall_overlap", "bridge_flow", "internal_bridge_flow",
-    "elefant_foot_compensation", "elefant_foot_compensation_layers", "elefant_foot_layers_density", "xy_contour_compensation", "xy_hole_compensation", "resolution", "enable_prime_tower", "prime_tower_enable_framework",
-    "prime_tower_width", "prime_tower_brim_width", "prime_tower_skip_points", "prime_volume",
+    "support_angle",
+    "support_interface_top_layers",
+    "support_interface_bottom_layers",
+    "support_interface_pattern",
+    "support_interface_spacing",
+    "support_interface_loop_pattern",
+    "support_top_z_distance",
+    "support_on_build_plate_only",
+    "support_critical_regions_only",
+    "bridge_no_support",
+    "thick_bridges",
+    "thick_internal_bridges",
+    "dont_filter_internal_bridges",
+    "enable_extra_bridge_layer",
+    "max_bridge_length",
+    "print_sequence",
+    "print_order",
+    "support_remove_small_overhang",
+    "filename_format",
+    "wall_filament",
+    "support_bottom_z_distance",
+    "sparse_infill_filament",
+    "solid_infill_filament",
+    "support_filament",
+    "support_interface_filament",
+    "support_interface_not_for_body",
+    "ooze_prevention",
+    "standby_temperature_delta",
+    "preheat_time",
+    "preheat_steps",
+    "interface_shells",
+    "line_width",
+    "initial_layer_line_width",
+    "inner_wall_line_width",
+    "outer_wall_line_width",
+    "sparse_infill_line_width",
+    "internal_solid_infill_line_width",
+    "skin_infill_line_width",
+    "skeleton_infill_line_width",
+    "top_surface_line_width",
+    "support_line_width",
+    "infill_wall_overlap",
+    "top_bottom_infill_wall_overlap",
+    "bridge_flow",
+    "internal_bridge_flow",
+    "elefant_foot_compensation",
+    "elefant_foot_compensation_layers",
+    "elefant_foot_layers_density",
+    "xy_contour_compensation",
+    "xy_hole_compensation",
+    "resolution",
+    "enable_prime_tower",
+    "prime_tower_enable_framework",
+    "prime_tower_width",
+    "prime_tower_brim_width",
+    "prime_tower_skip_points",
+    "prime_volume",
     "prime_tower_infill_gap",
     "prime_tower_flat_ironing",
     "enable_tower_interface_features",
     "enable_tower_interface_cooldown_during_tower",
-    "wipe_tower_no_sparse_layers", "compatible_printers", "compatible_printers_condition", "inherits",
-    "flush_into_infill", "flush_into_objects", "flush_into_support",
-     "tree_support_branch_angle", "tree_support_angle_slow", "tree_support_wall_count", "tree_support_top_rate", "tree_support_branch_distance", "tree_support_tip_diameter",
-     "tree_support_branch_diameter", "tree_support_branch_diameter_angle",
-     "detect_narrow_internal_solid_infill",
-     "gcode_add_line_number", "enable_arc_fitting", "precise_z_height", "infill_combination","infill_combination_max_layer_height", /*"adaptive_layer_height",*/
-     "support_bottom_interface_spacing", "enable_overhang_speed", "slowdown_for_curled_perimeters", "overhang_1_4_speed", "overhang_2_4_speed", "overhang_3_4_speed", "overhang_4_4_speed",
-     "initial_layer_infill_speed", "only_one_wall_top", 
-     "timelapse_type",
-     "wall_generator", "wall_transition_length", "wall_transition_filter_deviation", "wall_transition_angle",
-     "wall_distribution_count", "min_feature_size", "min_bead_width", "post_process", "process_change_extrusion_role_gcode",
-     "min_length_factor", "wall_maximum_resolution", "wall_maximum_deviation",
-     "small_perimeter_speed", "small_perimeter_threshold","bridge_angle","internal_bridge_angle", "filter_out_gap_fill", "travel_acceleration","inner_wall_acceleration", "min_width_top_surface",
-     "default_jerk", "outer_wall_jerk", "inner_wall_jerk", "infill_jerk", "top_surface_jerk", "initial_layer_jerk","travel_jerk","default_junction_deviation",
-     "top_solid_infill_flow_ratio","bottom_solid_infill_flow_ratio","only_one_wall_first_layer", "print_flow_ratio", "seam_gap",
-     "set_other_flow_ratios", "first_layer_flow_ratio", "outer_wall_flow_ratio", "inner_wall_flow_ratio", "overhang_flow_ratio", "sparse_infill_flow_ratio", "internal_solid_infill_flow_ratio", "gap_fill_flow_ratio", "support_flow_ratio", "support_interface_flow_ratio", 
-     "role_based_wipe_speed", "wipe_speed", "accel_to_decel_enable", "accel_to_decel_factor", "wipe_on_loops", "wipe_before_external_loop",
-     "bridge_density","internal_bridge_density", "precise_outer_wall", "bridge_acceleration",
-     "sparse_infill_acceleration", "internal_solid_infill_acceleration", "tree_support_auto_brim", 
-     "tree_support_brim_width", "gcode_comments", "gcode_label_objects",
-     "initial_layer_travel_speed", "initial_layer_travel_acceleration", "initial_layer_travel_jerk", "exclude_object", "slow_down_layers", "infill_anchor", "infill_anchor_max","initial_layer_min_bead_width",
-     "make_overhang_printable", "make_overhang_printable_angle", "make_overhang_printable_hole_size" ,"notes",
-     "wipe_tower_cone_angle", "wipe_tower_extra_spacing","wipe_tower_max_purge_speed", 
-     "wipe_tower_wall_type", "wipe_tower_extra_rib_length", "wipe_tower_rib_width", "wipe_tower_fillet_wall",
-     "wipe_tower_filament", "wiping_volumes_extruders","wipe_tower_bridging", "wipe_tower_extra_flow","single_extruder_multi_material_priming",
-     "wipe_tower_rotation_angle", "tree_support_branch_distance_organic", "tree_support_branch_diameter_organic", "tree_support_branch_angle_organic",
-     "hole_to_polyhole", "hole_to_polyhole_threshold", "hole_to_polyhole_twisted", "mmu_segmented_region_max_width", "mmu_segmented_region_interlocking_depth",
-     "small_area_infill_flow_compensation", "small_area_infill_flow_compensation_model",
-     "enable_wrapping_detection",
-     "seam_slope_type", "seam_slope_conditional", "scarf_angle_threshold", "scarf_joint_speed", "scarf_joint_flow_ratio", "seam_slope_start_height", "seam_slope_entire_loop", "seam_slope_min_length", "seam_slope_steps", "seam_slope_inner_walls", "scarf_overhang_threshold",
-     "interlocking_beam", "interlocking_orientation", "interlocking_beam_layer_count", "interlocking_depth", "interlocking_boundary_avoidance", "interlocking_beam_width","calib_flowrate_topinfill_special_order",
+    "wipe_tower_no_sparse_layers",
+    "compatible_printers",
+    "compatible_printers_condition",
+    "inherits",
+    "flush_into_infill",
+    "flush_into_objects",
+    "flush_into_support",
+    "tree_support_branch_angle",
+    "tree_support_angle_slow",
+    "tree_support_wall_count",
+    "tree_support_top_rate",
+    "tree_support_branch_distance",
+    "tree_support_tip_diameter",
+    "tree_support_branch_diameter",
+    "tree_support_branch_diameter_angle",
+    "detect_narrow_internal_solid_infill",
+    "gcode_add_line_number",
+    "enable_arc_fitting",
+    "precise_z_height",
+    "infill_combination",
+    "infill_combination_max_layer_height", /*"adaptive_layer_height",*/
+    "support_bottom_interface_spacing",
+    "enable_overhang_speed",
+    "slowdown_for_curled_perimeters",
+    "overhang_1_4_speed",
+    "overhang_2_4_speed",
+    "overhang_3_4_speed",
+    "overhang_4_4_speed",
+    "initial_layer_infill_speed",
+    "only_one_wall_top",
+    "timelapse_type",
+    "wall_generator",
+    "wall_transition_length",
+    "wall_transition_filter_deviation",
+    "wall_transition_angle",
+    "wall_distribution_count",
+    "min_feature_size",
+    "min_bead_width",
+    "post_process",
+    "process_change_extrusion_role_gcode",
+    "min_length_factor",
+    "wall_maximum_resolution",
+    "wall_maximum_deviation",
+    "small_perimeter_speed",
+    "small_perimeter_threshold",
+    "bridge_angle",
+    "internal_bridge_angle",
+    "filter_out_gap_fill",
+    "travel_acceleration",
+    "inner_wall_acceleration",
+    "min_width_top_surface",
+    "default_jerk",
+    "outer_wall_jerk",
+    "inner_wall_jerk",
+    "infill_jerk",
+    "top_surface_jerk",
+    "initial_layer_jerk",
+    "travel_jerk",
+    "default_junction_deviation",
+    "top_solid_infill_flow_ratio",
+    "bottom_solid_infill_flow_ratio",
+    "only_one_wall_first_layer",
+    "print_flow_ratio",
+    "seam_gap",
+    "set_other_flow_ratios",
+    "first_layer_flow_ratio",
+    "outer_wall_flow_ratio",
+    "inner_wall_flow_ratio",
+    "overhang_flow_ratio",
+    "sparse_infill_flow_ratio",
+    "internal_solid_infill_flow_ratio",
+    "gap_fill_flow_ratio",
+    "support_flow_ratio",
+    "support_interface_flow_ratio",
+    "role_based_wipe_speed",
+    "wipe_speed",
+    "accel_to_decel_enable",
+    "accel_to_decel_factor",
+    "wipe_on_loops",
+    "wipe_before_external_loop",
+    "bridge_density",
+    "internal_bridge_density",
+    "precise_outer_wall",
+    "bridge_acceleration",
+    "sparse_infill_acceleration",
+    "internal_solid_infill_acceleration",
+    "tree_support_auto_brim",
+    "tree_support_brim_width",
+    "gcode_comments",
+    "gcode_label_objects",
+    "initial_layer_travel_speed",
+    "initial_layer_travel_acceleration",
+    "initial_layer_travel_jerk",
+    "exclude_object",
+    "slow_down_layers",
+    "infill_anchor",
+    "infill_anchor_max",
+    "initial_layer_min_bead_width",
+    "make_overhang_printable",
+    "make_overhang_printable_angle",
+    "make_overhang_printable_hole_size",
+    "notes",
+    "wipe_tower_cone_angle",
+    "wipe_tower_extra_spacing",
+    "wipe_tower_max_purge_speed",
+    "wipe_tower_wall_type",
+    "wipe_tower_extra_rib_length",
+    "wipe_tower_rib_width",
+    "wipe_tower_fillet_wall",
+    "wipe_tower_filament",
+    "wiping_volumes_extruders",
+    "wipe_tower_bridging",
+    "wipe_tower_extra_flow",
+    "single_extruder_multi_material_priming",
+    "wipe_tower_rotation_angle",
+    "tree_support_branch_distance_organic",
+    "tree_support_branch_diameter_organic",
+    "tree_support_branch_angle_organic",
+    "hole_to_polyhole",
+    "hole_to_polyhole_threshold",
+    "hole_to_polyhole_twisted",
+    "mmu_segmented_region_max_width",
+    "mmu_segmented_region_interlocking_depth",
+    "small_area_infill_flow_compensation",
+    "small_area_infill_flow_compensation_model",
+    "enable_wrapping_detection",
+    "seam_slope_type",
+    "seam_slope_conditional",
+    "scarf_angle_threshold",
+    "scarf_joint_speed",
+    "scarf_joint_flow_ratio",
+    "seam_slope_start_height",
+    "seam_slope_entire_loop",
+    "seam_slope_min_length",
+    "seam_slope_steps",
+    "seam_slope_inner_walls",
+    "scarf_overhang_threshold",
+    "interlocking_beam",
+    "interlocking_orientation",
+    "interlocking_beam_layer_count",
+    "interlocking_depth",
+    "interlocking_boundary_avoidance",
+    "interlocking_beam_width",
+    "calib_flowrate_topinfill_special_order",
+    // Z Anti-Aliasing (ZAA)
+    "zaa_enabled",
+    "zaa_minimize_perimeter_height",
+    "zaa_dont_alternate_fill_direction",
+    "zaa_min_z",
+    "ironing_expansion",
 };
 
 static std::vector<std::string> s_Preset_filament_options {/*"filament_colour", */ "default_filament_colour", "required_nozzle_HRC", "filament_diameter", "pellet_flow_coefficient", "volumetric_speed_coefficients", "filament_type",

src/libslic3r/Print.cpp

@@ -2213,6 +2213,17 @@ void Print::process(long long *time_cost_with_cache, bool use_cache)
             }
         }
 
+        // Z-Contouring
+        for (PrintObject *obj : m_objects) {
+            bool need_contouring = need_slicing_objects.count(obj) != 0 && obj->need_z_contouring();
+            if (need_contouring) {
+                obj->contour_z();
+            } else {
+                if (obj->set_started(posContouring))
+                    obj->set_done(posContouring);
+            }
+        }
+
         tbb::parallel_for(tbb::blocked_range<int>(0, int(m_objects.size())),
             [this, need_slicing_objects](const tbb::blocked_range<int>& range) {
                 for (int i = range.begin(); i < range.end(); i++) {
@@ -2251,6 +2262,8 @@ void Print::process(long long *time_cost_with_cache, bool use_cache)
                     obj->set_done(posInfill);
                 if (obj->set_started(posIroning))
                     obj->set_done(posIroning);
+                if (obj->set_started(posContouring))
+                    obj->set_done(posContouring);
                 if (obj->set_started(posSupportMaterial))
                     obj->set_done(posSupportMaterial);
                 if (obj->set_started(posDetectOverhangsForLift))
@@ -2630,7 +2643,7 @@ void Print::_make_skirt()
                     flow.width(),
 				    (float)initial_layer_print_height  // this will be overridden at G-code export time
                 )));
-            eloop.paths.back().polyline = loop.split_at_first_point();
+            eloop.paths.back().polyline = Polyline3(loop.split_at_first_point());
             m_skirt.append(eloop);
             if (m_config.min_skirt_length.value > 0) {
                 // The skirt length is limited. Sum the total amount of filament length extruded, in mm.
@@ -2688,7 +2701,7 @@ void Print::_make_skirt()
                         flow.width(),
                         (float)initial_layer_print_height  // this will be overridden at G-code export time
                     )));
-                eloop.paths.back().polyline = loop.split_at_first_point();
+                eloop.paths.back().polyline = Polyline3(loop.split_at_first_point());
                 object->m_skirt.append(std::move(eloop));
                 if (m_config.min_skirt_length.value > 0) {
                     // The skirt length is limited. Sum the total amount of filament length extruded, in mm.
@@ -4093,7 +4106,8 @@ static void from_json(const json& j, Polyline& poly_line) {
 }
 
 static void from_json(const json& j, ExtrusionPath& extrusion_path) {
-    extrusion_path.polyline               =    j[JSON_EXTRUSION_POLYLINE];
+    Polyline temp_polyline = j[JSON_EXTRUSION_POLYLINE];
+    extrusion_path.polyline = Polyline3(temp_polyline);
     extrusion_path.mm3_per_mm             =    j[JSON_EXTRUSION_MM3_PER_MM];
     extrusion_path.width                  =    j[JSON_EXTRUSION_WIDTH];
     extrusion_path.height                 =    j[JSON_EXTRUSION_HEIGHT];
@@ -4946,8 +4960,9 @@ ExtrusionLayers FakeWipeTower::getTrueExtrusionLayersFromWipeTower() const
         paths.reserve(it->second.size());
         for (auto &polyline : it->second) {
             ExtrusionPath path(ExtrusionRole::erWipeTower, 0.0, 0.0, layer_heights[index]);
-            path.polyline = polyline;
-            for (auto &p : path.polyline.points) p += trans;
+            path.polyline = Polyline3(polyline);
+            Point3 trans3(trans, 0);
+            for (auto &p : path.polyline.points) p += trans3;
             paths.push_back(path);
         }
         el.paths    = std::move(paths);

src/libslic3r/Print.hpp

@@ -92,7 +92,7 @@ enum PrintStep {
 
 enum PrintObjectStep {
     posSlice, posPerimeters,posEstimateCurledExtrusions, posPrepareInfill,
-    posInfill, posIroning, posSupportMaterial, posSimplifyPath, posSimplifySupportPath,
+    posInfill, posIroning, posContouring, posSupportMaterial, posSimplifyPath, posSimplifySupportPath,
     // BBS
     posDetectOverhangsForLift,
     posSimplifyWall, posSimplifyInfill,
@@ -496,6 +496,8 @@ private:
     void prepare_infill();
     void infill();
     void ironing();
+    bool need_z_contouring() const;
+    void contour_z();
     void generate_support_material();
     void estimate_curled_extrusions();
     void simplify_extrusion_path();
@@ -642,14 +644,14 @@ struct FakeWipeTower
         std::vector<ExtrusionPaths> paths;
         for (float h = 0.f; h < height; h += layer_height) {
             ExtrusionPath path(ExtrusionRole::erWipeTower, 0.0, 0.0, layer_height);
-            path.polyline = {minCorner, {maxCorner.x(), minCorner.y()}, maxCorner, {minCorner.x(), maxCorner.y()}, minCorner};
+            path.polyline = Polyline3(Polyline{{minCorner, {maxCorner.x(), minCorner.y()}, maxCorner, {minCorner.x(), maxCorner.y()}, minCorner}});
             paths.push_back({path});
 
             if (h == 0.f) { // add brim
                 ExtrusionPath fakeBrim(ExtrusionRole::erBrim, 0.0, 0.0, layer_height);
                 Point         wtbminCorner = {minCorner - Point{bd, bd}};
                 Point         wtbmaxCorner = {maxCorner + Point{bd, bd}};
-                fakeBrim.polyline          = {wtbminCorner, {wtbmaxCorner.x(), wtbminCorner.y()}, wtbmaxCorner, {wtbminCorner.x(), wtbmaxCorner.y()}, wtbminCorner};
+                fakeBrim.polyline          = Polyline3(Polyline{{wtbminCorner, {wtbmaxCorner.x(), wtbminCorner.y()}, wtbmaxCorner, {wtbminCorner.x(), wtbmaxCorner.y()}, wtbminCorner}});
                 paths.back().push_back(fakeBrim);
             }
         }
@@ -686,13 +688,13 @@ struct FakeWipeTower
 
 
             ExtrusionPath path(ExtrusionRole::erWipeTower, 0.0, 0.0, lh);
-            path.polyline = { minCorner, {maxCorner.x(), minCorner.y()}, maxCorner, {minCorner.x(), maxCorner.y()}, minCorner };
+            path.polyline = Polyline3(Polyline{{ minCorner, {maxCorner.x(), minCorner.y()}, maxCorner, {minCorner.x(), maxCorner.y()}, minCorner }});
             paths.push_back({ path });
 
             // We added the border, now add several parallel lines so we can detect an object that is fully inside the tower.
             // For now, simply use fixed spacing of 3mm.
             for (coord_t y=minCorner.y()+scale_(3.); y<maxCorner.y(); y+=scale_(3.)) {
-                path.polyline = { {minCorner.x(), y}, {maxCorner.x(), y} };
+                path.polyline = Polyline3(Polyline{{ {minCorner.x(), y}, {maxCorner.x(), y} }});
                 paths.back().emplace_back(path);
             }
 

src/libslic3r/PrintConfig.cpp

@@ -696,11 +696,11 @@ void PrintConfigDef::init_common_params()
     def->set_default_value(new ConfigOptionInt(1));	
 
     def           = this->add("elefant_foot_layers_density", coPercent);
-    def->label    = L("Elefant foot layers density");
+    def->label    = L("Elephant foot layers density");
     def->category = L("Quality");
-    def->tooltip  = L("Density of internal solid infill for elefant foot layers compensation. "
-                      "The initial value for the second layer is set. "
-                      "Subsequent layers become linearly denser by the height specified in elefant_foot_compensation_layers. ");
+    def->tooltip  = L("Density of internal solid infill for Elephant foot layers compensation.\n"
+                      "The initial value for the second layer is set.\n"
+                      "Subsequent layers become linearly denser by the height specified in elefant_foot_compensation_layers.");
     def->sidetext = "%";
     def->min      = 50;
     def->max      = 100;
@@ -2191,6 +2191,7 @@ void PrintConfigDef::init_fff_params()
                      "This setting changes all extrusion flow of this filament in G-code proportionally. "
                      "The recommended value range is between 0.95 and 1.05. "
                      "You may be able to tune this value to get a nice flat surface if there is slight overflow or underflow.");
+    def->min = 0;
     def->max = 2;
     def->mode = comAdvanced;
     def->nullable = true;
@@ -4111,6 +4112,53 @@ void PrintConfigDef::init_fff_params()
     def->mode     = comAdvanced;
     def->set_default_value(new ConfigOptionBool(false));
 
+    def           = this->add("ironing_expansion", coFloat);
+    def->label    = L("Ironing expansion");
+    def->category = L("Quality");
+    def->tooltip  = L("Expand or contract the ironing area.");
+    def->sidetext = L("mm");
+    def->min      = -100;
+    def->max      = 100;
+    def->mode     = comExpert;
+    def->set_default_value(new ConfigOptionFloat(0));
+
+    def = this->add("zaa_enabled", coBool);
+    def->label    = L("Z contouring enabled");
+    def->category = L("Quality");
+    def->tooltip  = L("Enable Z-layer contouring (aka Z-layer anti-aliasing).");
+    def->mode     = comExpert;
+    def->set_default_value(new ConfigOptionBool(false));
+
+    def = this->add("zaa_minimize_perimeter_height", coFloat);
+    def->label    = L("Minimize wall height angle");
+    def->category = L("Quality");
+    def->tooltip  = L("Reduce the height of top-surface perimeters to match the model edge height.\n"
+                      "Affects perimeters with a slope less than this angle (degrees).\n"
+                      "A reasonable value is 35. Set to 0 to disable.");
+    def->sidetext = L("°");
+    def->min      = 0;
+    def->max      = 90;
+    def->mode     = comExpert;
+    def->set_default_value(new ConfigOptionFloat(0));
+
+    def = this->add("zaa_dont_alternate_fill_direction", coBool);
+    def->label    = L("Don't alternate fill direction");
+    def->category = L("Quality");
+    def->tooltip  = L("Disable alternating fill direction when using Z contouring.");
+    def->mode     = comExpert;
+    def->set_default_value(new ConfigOptionBool(false));
+
+    def = this->add("zaa_min_z", coFloat);
+    def->label    = L("Minimum z height");
+    def->category = L("Quality");
+    def->tooltip  = L("Minimum Z-layer height.\n"
+                      "Also controls the slicing plane.");
+    def->sidetext = L("mm");
+    def->min      = 0;
+    def->max      = 100;
+    def->mode     = comExpert;
+    def->set_default_value(new ConfigOptionFloat(0.05));
+
     def = this->add("layer_change_gcode", coString);
     def->label = L("Layer change G-code");
     def->tooltip = L("This G-code is inserted at every layer change after the Z lift.");
@@ -5192,7 +5240,8 @@ void PrintConfigDef::init_fff_params()
     def->label = L("Scarf joint flow ratio");
     def->category = L("Quality");
     def->tooltip = L("This factor affects the amount of material for scarf joints.");
-    def->mode = comDevelop;
+    def->mode = comExpert;
+    def->min = 0;
     def->max = 2;
     def->set_default_value(new ConfigOptionFloat(1));
 

src/libslic3r/PrintConfig.hpp

@@ -1198,7 +1198,13 @@ PRINT_CONFIG_CLASS_DEFINE(
     ((ConfigOptionFloatOrPercent,       scarf_joint_speed))
     ((ConfigOptionFloat,                scarf_joint_flow_ratio))
     ((ConfigOptionPercent,              scarf_overhang_threshold))
-)
+    
+    // Orca: Z Anti-Aliasing (aka Z Contouring)
+    ((ConfigOptionBool, zaa_enabled))
+    ((ConfigOptionBool, zaa_dont_alternate_fill_direction))
+    ((ConfigOptionFloat, zaa_min_z))
+    ((ConfigOptionFloat, zaa_minimize_perimeter_height))
+    )
 
 PRINT_CONFIG_CLASS_DEFINE(
     MachineEnvelopeConfig,

src/libslic3r/PrintObject.cpp

@@ -1,4 +1,6 @@
 #include "Exception.hpp"
+#include "Model.hpp"
+#include "Point.hpp"
 #include "Print.hpp"
 #include "BoundingBox.hpp"
 #include "ClipperUtils.hpp"
@@ -8,6 +10,7 @@
 #include "Layer.hpp"
 #include "MutablePolygon.hpp"
 #include "PrintConfig.hpp"
+#include "SLA/IndexedMesh.hpp"
 #include "Support/SupportMaterial.hpp"
 #include "Support/SupportSpotsGenerator.hpp"
 #include "Support/TreeSupport.hpp"
@@ -22,7 +25,11 @@
 #include "format.hpp"
 #include "AABBTreeLines.hpp"
 
+#include <cstddef>
 #include <float.h>
+#include <iterator>
+#include <mutex>
+#include <string>
 #include <oneapi/tbb/blocked_range.h>
 #include <oneapi/tbb/concurrent_vector.h>
 #include <oneapi/tbb/parallel_for.h>
@@ -709,6 +716,65 @@ void PrintObject::ironing()
     }
 }
 
+bool PrintObject::need_z_contouring() const
+{
+    size_t num_regions = this->num_printing_regions();
+    for (size_t region_id = 0; region_id < num_regions; region_id++) {
+        if (this->printing_region(region_id).config().zaa_enabled)
+            return true;
+    }
+
+    return false;
+}
+
+void PrintObject::contour_z()
+{
+    if (!this->set_started(posContouring)) {
+        return;
+    }
+
+    m_print->set_status(40, L("Z contouring"));
+    BOOST_LOG_TRIVIAL(debug) << "Contouring in parallel - start";
+
+    TriangleMesh mesh = this->m_model_object->raw_mesh();
+    if (m_model_object->instances.size() != 1) {
+        throw RuntimeError("ContourZ: unexpected number of instances");
+    }
+
+    ModelInstance *inst = m_model_object->instances.front();
+    Point                    center_offset = this->center_offset();
+    Geometry::Transformation trans = inst->get_transformation();
+
+    double z = this->m_model_object->min_z();
+    trans.set_offset(Vec3d(-unscale<double>(center_offset.x()), -unscale<double>(center_offset.y()), 0));
+    mesh.transform(trans.get_matrix());
+
+    sla::IndexedMesh imesh(mesh);
+    imesh.ground_level_offset(-z);
+
+    std::mutex mtx;
+    size_t completed = 0;
+    tbb::parallel_for(
+        // Contouring starting with layer second layer to avoid build plate collision
+        tbb::blocked_range<size_t>(1, m_layers.size()),
+        [&, this](const tbb::blocked_range<size_t>& range) {
+            for (size_t layer_idx = range.begin(); layer_idx < range.end(); layer_idx++) {
+                m_print->throw_if_canceled();
+                m_layers[layer_idx]->make_contour_z(imesh);
+
+                std::scoped_lock lock(mtx);
+                completed++;
+                std::string msg = (boost::format("Z contoured layer %d/%d (%d%%)") % (completed) % m_layers.size() % int(double(completed) / m_layers.size() * 100)).str();
+                m_print->set_status(40, msg);
+            }
+        }
+    );
+    m_print->throw_if_canceled();
+    BOOST_LOG_TRIVIAL(debug) << "Contouring in parallel - end";
+
+    this->set_done(posContouring);
+}
+
 // BBS
 void PrintObject::clear_overhangs_for_lift()
 {
@@ -1370,15 +1436,15 @@ bool PrintObject::invalidate_step(PrintObjectStep step)
 
     // propagate to dependent steps
     if (step == posPerimeters) {
-		invalidated |= this->invalidate_steps({ posPrepareInfill, posInfill, posIroning, posSimplifyPath, posSimplifyInfill });
+		invalidated |= this->invalidate_steps({ posPrepareInfill, posInfill, posIroning, posContouring, posSimplifyPath, posSimplifyInfill });
         invalidated |= m_print->invalidate_steps({ psSkirtBrim });
     } else if (step == posPrepareInfill) {
-        invalidated |= this->invalidate_steps({ posInfill, posIroning, posSimplifyPath, posSimplifyInfill });
+        invalidated |= this->invalidate_steps({ posInfill, posIroning, posContouring, posSimplifyPath, posSimplifyInfill });
     } else if (step == posInfill) {
-        invalidated |= this->invalidate_steps({ posIroning, posSimplifyInfill });
+        invalidated |= this->invalidate_steps({ posIroning, posContouring, posSimplifyInfill });
         invalidated |= m_print->invalidate_steps({ psSkirtBrim });
     } else if (step == posSlice) {
-		invalidated |= this->invalidate_steps({ posPerimeters, posPrepareInfill, posInfill, posIroning, posSupportMaterial, posSimplifyPath, posSimplifyInfill });
+		invalidated |= this->invalidate_steps({ posPerimeters, posPrepareInfill, posInfill, posIroning, posContouring, posSupportMaterial, posSimplifyPath, posSimplifyInfill });
         invalidated |= m_print->invalidate_steps({ psSkirtBrim });
         m_slicing_params.valid = false;
     } else if (step == posSupportMaterial) {

src/libslic3r/PrintObjectSlice.cpp

@@ -4,6 +4,7 @@
 
 #include "ClipperUtils.hpp"
 #include "ElephantFootCompensation.hpp"
+#include "Exception.hpp"
 #include "I18N.hpp"
 #include "Layer.hpp"
 #include "MultiMaterialSegmentation.hpp"
@@ -34,6 +35,23 @@ LayerPtrs new_layers(
         coordf_t lo = object_layers[i_layer];
         coordf_t hi = object_layers[i_layer + 1];
         coordf_t slice_z = 0.5 * (lo + hi);
+        bool zaa_active = false;
+        coordf_t z_offset = 0.0;
+        size_t num_regions = print_object->num_printing_regions();
+        for (size_t rid = 0; rid < num_regions; ++rid) {
+            const auto &rcfg = print_object->printing_region(rid).config();
+            if (rcfg.zaa_enabled) {
+                if (!zaa_active || rcfg.zaa_min_z < z_offset)
+                    z_offset = rcfg.zaa_min_z;
+                zaa_active = true;
+            }
+        }
+        if (zaa_active) {
+            slice_z = lo + z_offset;
+            if ((slice_z < lo && !is_approx(slice_z, lo)) || (slice_z > hi && !is_approx(slice_z, hi))) {
+                throw RuntimeError("Bad min Z value");
+            }
+        }
         Layer *layer = new Layer(id ++, print_object, hi - lo, hi + zmin, slice_z);
         out.emplace_back(layer);
         if (prev != nullptr) {

src/libslic3r/ShortestPath.cpp

@@ -1000,7 +1000,7 @@ std::vector<std::pair<size_t, bool>> chain_segments_greedy2(SegmentEndPointFunc
 
 std::vector<std::pair<size_t, bool>> chain_extrusion_entities(std::vector<ExtrusionEntity*> &entities, const Point *start_near)
 {
-	auto segment_end_point = [&entities](size_t idx, bool first_point) -> const Point& { return first_point ? entities[idx]->first_point() : entities[idx]->last_point(); };
+	auto segment_end_point = [&entities](size_t idx, bool first_point) -> Point { return first_point ? entities[idx]->first_point() : entities[idx]->last_point(); };
 	auto could_reverse = [&entities](size_t idx) { const ExtrusionEntity *ee = entities[idx]; return ee->is_loop() || ee->can_reverse(); };
 	std::vector<std::pair<size_t, bool>> out = chain_segments_greedy_constrained_reversals<Point, decltype(segment_end_point), decltype(could_reverse)>(segment_end_point, could_reverse, entities.size(), start_near);
 	for (std::pair<size_t, bool> &segment : out) {
@@ -1028,6 +1028,11 @@ void reorder_extrusion_entities(std::vector<ExtrusionEntity*> &entities, const s
     entities.swap(out);
 }
 
+void chain_and_reorder_extrusion_entities(std::vector<ExtrusionEntity*> &entities, const Point &start_near)
+{
+	chain_and_reorder_extrusion_entities(entities, &start_near);
+}
+
 void chain_and_reorder_extrusion_entities(std::vector<ExtrusionEntity*> &entities, const Point *start_near)
 {
     // this function crashes if there are empty elements in entities
@@ -1038,7 +1043,7 @@ void chain_and_reorder_extrusion_entities(std::vector<ExtrusionEntity*> &entitie
 
 std::vector<std::pair<size_t, bool>> chain_extrusion_paths(std::vector<ExtrusionPath> &extrusion_paths, const Point *start_near)
 {
-	auto segment_end_point = [&extrusion_paths](size_t idx, bool first_point) -> const Point& { return first_point ? extrusion_paths[idx].first_point() : extrusion_paths[idx].last_point(); };
+	auto segment_end_point = [&extrusion_paths](size_t idx, bool first_point) -> Point { return first_point ? extrusion_paths[idx].first_point() : extrusion_paths[idx].last_point(); };
 	return chain_segments_greedy<Point, decltype(segment_end_point)>(segment_end_point, extrusion_paths.size(), start_near);
 }
 

src/libslic3r/ShortestPath.hpp

@@ -20,6 +20,7 @@ std::vector<size_t> 				 chain_expolygons(const ExPolygons &input_exploy);
 
 std::vector<std::pair<size_t, bool>> chain_extrusion_entities(std::vector<ExtrusionEntity*> &entities, const Point *start_near = nullptr);
 void                                 reorder_extrusion_entities(std::vector<ExtrusionEntity*> &entities, const std::vector<std::pair<size_t, bool>> &chain);
+void                                 chain_and_reorder_extrusion_entities(std::vector<ExtrusionEntity*> &entities, const Point &start_near);
 void                                 chain_and_reorder_extrusion_entities(std::vector<ExtrusionEntity*> &entities, const Point *start_near = nullptr);
 
 std::vector<std::pair<size_t, bool>> chain_extrusion_paths(std::vector<ExtrusionPath> &extrusion_paths, const Point *start_near = nullptr);

src/libslic3r/Support/SupportCommon.cpp

@@ -1163,7 +1163,7 @@ static void modulate_extrusion_by_overlapping_layers(
         for (ExtrusionEntity *ee : extrusions_in_out) {
             ExtrusionPath *path = dynamic_cast<ExtrusionPath*>(ee);
             assert(path != nullptr);
-            polylines.emplace_back(Polyline(std::move(path->polyline)));
+            polylines.emplace_back(path->polyline.to_polyline());
             path_ends.emplace_back(std::pair<Point, Point>(polylines.back().points.front(), polylines.back().points.back()));
             delete path;
         }
@@ -1288,9 +1288,10 @@ static void modulate_extrusion_by_overlapping_layers(
             if (! path->polyline.points.empty())
                 path->polyline.points.pop_back();
             // Consume the fragment's polyline, remove it from the input fragments, so it will be ignored the next time.
-            path->polyline.append(std::move(frag_polyline));
+            path->polyline.append(Polyline3(std::move(frag_polyline)));
             frag_polyline.points.clear();
-            pt_current = path->polyline.points.back();
+            const Point3 &pt_back3 = path->polyline.points.back();
+            pt_current = Point(pt_back3.x(), pt_back3.y());
             if (pt_current == pt_end) {
                 // End of the path.
                 break;