Add filament_retract_length_toolchange/filament_retract_restart_extra_toolchange config and update tool changer printer's profiles (#15039 )

* update snapmaker profiles. largely ported for Snapmaker Orca fork * update prime volume * set precise_outer_wall to 1 * Update per-material multi-tool ramming to the filament library * Add per-filament overrides for toolchange retraction * Set toolchange retraction per filament for Snapmaker U1 * set default support type to tree * format snapmaker profiles
Smooth out the spiral lift when arc fitting is disabled (#15118 )
2026-08-04 23:08:50 +03:00 · 2026-08-05 00:13:27 +08:00 · 2026-08-05 00:09:46 +08:00 · 2026-08-04 11:37:05 -03:00 · 2026-08-04 22:01:45 +08:00 · 2026-08-04 21:56:15 +08:00
263 changed files with 11801 additions and 1809 deletions
--- a/.github/workflows/update-translation.yml
+++ b/.github/workflows/update-translation.yml
@@ -13,7 +13,7 @@ jobs:
        uses: actions/checkout@v7

      - name: Setup Python
-        uses: actions/setup-python@v7
+        uses: actions/setup-python@v6
        with:
          python-version: '3.12'

--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -80,8 +80,12 @@ endif()

 if (DEFINED BBL_RELEASE_TO_PUBLIC)
    add_compile_definitions("BBL_RELEASE_TO_PUBLIC=${BBL_RELEASE_TO_PUBLIC}")
+    if (BBL_RELEASE_TO_PUBLIC)
+        add_compile_definitions(WXINSPECTOR_DISABLE)
+    endif ()
 else ()
    add_compile_definitions("BBL_RELEASE_TO_PUBLIC=$<CONFIG:Release>")
+    add_compile_definitions("$<$<CONFIG:Release>:WXINSPECTOR_DISABLE>")
 endif ()

 find_package(Git)
--- a/deps/OpenSSL/OpenSSL.cmake
+++ b/deps/OpenSSL/OpenSSL.cmake
@@ -52,6 +52,14 @@ ExternalProject_Add(dep_OpenSSL
 	CONFIGURE_COMMAND ${_conf_cmd} ${_cross_arch}
        "--openssldir=${DESTDIR}"
        "--prefix=${DESTDIR}"
+        # OpenSSL's linux-x86_64 target sets multilib=64, so it installs to
+        # <prefix>/lib64 while every other dep uses <prefix>/lib. CPython's
+        # --with-openssl only ever emits -L<dir>/lib, so it misses the bundled
+        # static libs and silently links the system OpenSSL instead -- which,
+        # against 1.1.1w headers, leaves _ssl.so with an undefined
+        # SSL_get_peer_certificate (removed in OpenSSL 3.x). Pin libdir so the
+        # prefix stays single-layout.
+        "--libdir=lib"
        ${_cross_comp_prefix_line}
        no-shared
        no-asm
--- a/deps_src/imgui/imstb_textedit.h
+++ b/deps_src/imgui/imstb_textedit.h
@@ -465,6 +465,57 @@ static void stb_textedit_click(STB_TEXTEDIT_STRING *str, STB_TexteditState *stat
      STB_TEXTEDIT_LAYOUTROW(&r, str, 0);
      y = r.ymin;
   }
+   else
+   {
+      // In multi-line mode, clamp y to stay within the text vertical bounds.
+      // This lets the click still land at a valid location if the mouse is slightly
+      // above or below the text.
+      StbTexteditRow r;
+      int n = STB_TEXTEDIT_STRINGLEN(str);
+      int i = 0;
+      float base_y = 0, y_min, y_max;
+
+      // Get the first row to establish y_min and start the iteration
+      STB_TEXTEDIT_LAYOUTROW(&r, str, 0);
+      if (r.num_chars <= 0)
+      {
+         state->cursor = 0;
+         state->select_start = state->cursor;
+         state->select_end = state->cursor;
+         state->has_preferred_x = 0;
+         return;
+      }
+      y_min = r.ymin;
+      y_max = base_y + r.ymax;
+      i = r.num_chars;
+      base_y += r.baseline_y_delta;
+
+      // Walk the remaining rows to find the bottom of the last row
+      while (i < n)
+      {
+         STB_TEXTEDIT_LAYOUTROW(&r, str, i);
+         if (r.num_chars <= 0)
+            break;
+         y_max = base_y + r.ymax;
+         i += r.num_chars;
+         base_y += r.baseline_y_delta;
+      }
+
+      // If the text ends with a newline, account for the empty trailing line
+      // so the cursor can be placed on it
+      if (n > 0 && STB_TEXTEDIT_GETCHAR(str, n - 1) == STB_TEXTEDIT_NEWLINE)
+      {
+         STB_TEXTEDIT_LAYOUTROW(&r, str, n);
+         y_max = base_y + r.ymax;
+      }
+
+      // Subtract half the last line height to avoid rounding issues when the mouse
+      // is just barely below the last line (keep cursor on the last line, not after the text)
+      y_max -= (r.ymax - r.ymin) * 0.5f;
+
+      if (y < y_min) y = y_min;
+      if (y > y_max) y = y_max;
+   }

   state->cursor = stb_text_locate_coord(str, x, y);
   state->select_start = state->cursor;
@@ -485,6 +536,50 @@ static void stb_textedit_drag(STB_TEXTEDIT_STRING *str, STB_TexteditState *state
      STB_TEXTEDIT_LAYOUTROW(&r, str, 0);
      y = r.ymin;
   }
+   else
+   {
+      // In multi-line mode, clamp y to stay within the text vertical bounds.
+      // This lets the drag keep working if the mouse goes off the top or bottom of the text.
+      StbTexteditRow r;
+      int n = STB_TEXTEDIT_STRINGLEN(str);
+      int i = 0;
+      float base_y = 0, y_min, y_max;
+
+      // Get the first row to establish y_min and start the iteration
+      STB_TEXTEDIT_LAYOUTROW(&r, str, 0);
+      if (r.num_chars <= 0)
+         return;
+      y_min = r.ymin;
+      y_max = base_y + r.ymax;
+      i = r.num_chars;
+      base_y += r.baseline_y_delta;
+
+      // Walk the remaining rows to find the bottom of the last row
+      while (i < n)
+      {
+         STB_TEXTEDIT_LAYOUTROW(&r, str, i);
+         if (r.num_chars <= 0)
+            break;
+         y_max = base_y + r.ymax;
+         i += r.num_chars;
+         base_y += r.baseline_y_delta;
+      }
+
+      // If the text ends with a newline, account for the empty trailing line
+      // so the cursor can be placed on it
+      if (n > 0 && STB_TEXTEDIT_GETCHAR(str, n - 1) == STB_TEXTEDIT_NEWLINE)
+      {
+         STB_TEXTEDIT_LAYOUTROW(&r, str, n);
+         y_max = base_y + r.ymax;
+      }
+
+      // Subtract half the last line height to avoid rounding issues when the mouse
+      // is just barely below the last line (keep cursor on the last line, not after the text)
+      y_max -= (r.ymax - r.ymin) * 0.5f;
+
+      if (y < y_min) y = y_min;
+      if (y > y_max) y = y_max;
+   }

   if (state->select_start == state->select_end)
      state->select_start = state->cursor;
--- a/localization/i18n/tr/OrcaSlicer_tr.po
+++ b/localization/i18n/tr/OrcaSlicer_tr.po
--- a/resources/profiles/Custom.json
+++ b/resources/profiles/Custom.json
@@ -1,6 +1,6 @@
 {
 	"name": "Custom Printer",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "My configurations",
 	"machine_model_list": [
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -24,12 +24,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -24,12 +24,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -24,12 +24,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -24,12 +24,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/machine/fdm_klipper_common.json
+++ b/resources/profiles/Custom/machine/fdm_klipper_common.json
@@ -116,7 +116,7 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"z_hop_types": "Normal Lift",
+	"z_hop_types": "Slope Lift",
 	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
--- a/resources/profiles/Custom/machine/fdm_repetier_common.json
+++ b/resources/profiles/Custom/machine/fdm_repetier_common.json
@@ -118,7 +118,7 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"z_hop_types": "Normal Lift",
+	"z_hop_types": "Slope Lift",
 	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
--- a/resources/profiles/Custom/machine/fdm_rrf_common.json
+++ b/resources/profiles/Custom/machine/fdm_rrf_common.json
@@ -116,7 +116,7 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"z_hop_types": "Normal Lift",
+	"z_hop_types": "Slope Lift",
 	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
--- a/resources/profiles/Custom/machine/fdm_toolchanger_common.json
+++ b/resources/profiles/Custom/machine/fdm_toolchanger_common.json
@@ -172,11 +172,11 @@
 		"0.4"
 	],
 	"z_hop_types": [
-		"Normal Lift",
-		"Normal Lift",
-		"Normal Lift",
-		"Normal Lift",
-		"Normal Lift"
+		"Slope Lift",
+		"Slope Lift",
+		"Slope Lift",
+		"Slope Lift",
+		"Slope Lift"
 	],
 	"purge_in_prime_tower": "0",
 	"machine_pause_gcode": "M601",
--- a/resources/profiles/OrcaFilamentLibrary.json
+++ b/resources/profiles/OrcaFilamentLibrary.json
@@ -1,6 +1,6 @@
 {
 	"name": "OrcaFilamentLibrary",
-	"version": "02.04.00.03",
+	"version": "02.04.00.04",
 	"force_update": "0",
 	"description": "Orca Filament Library",
 	"filament_list": [
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
@@ -36,6 +36,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_type": [
 		"PET-CF"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
@@ -39,6 +39,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_vendor": [
 		"Bambu Lab"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
@@ -39,6 +39,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_vendor": [
 		"Bambu Lab"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
@@ -21,6 +21,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_type": [
 		"PLA-AERO"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
@@ -27,6 +27,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_scarf_seam_type": [
 		"none"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
@@ -21,6 +21,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_vendor": [
 		"Bambu Lab"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX
+++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX
@@ -36,6 +36,9 @@
 	"filament_max_volumetric_speed": [
 		"1"
 	],
+	"filament_multitool_ramming_flow": [
+		"1"
+	],
 	"filament_retraction_minimum_travel": [
 		"3"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
@@ -72,15 +72,6 @@
 	"fan_min_speed": [
 		"10"
 	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
 	"filament_cost": [
 		"599"
 	],
@@ -99,30 +90,12 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
 	"filament_long_retractions_when_cut": [
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
 		"15"
 	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"0"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
 	"filament_notes": [
 		""
 	],
@@ -165,21 +138,6 @@
 	"filament_soluble": [
 		"0"
 	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
 	"filament_vendor": [
 		"Elas"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
@@ -42,15 +42,6 @@
 	"fan_min_speed": [
 		"20"
 	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
 	"filament_cost": [
 		"445"
 	],
@@ -69,30 +60,12 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
 	"filament_long_retractions_when_cut": [
 		"1"
 	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"0"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
 	"filament_notes": [
 		""
 	],
@@ -135,21 +108,6 @@
 	"filament_soluble": [
 		"0"
 	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
 	"filament_wipe": [
 		"nil"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
@@ -71,15 +71,6 @@
 	"fan_min_speed": [
 		"60"
 	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
 	"filament_cost": [
 		"449.5"
 	],
@@ -98,30 +89,12 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
 	"filament_long_retractions_when_cut": [
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
 		"25"
 	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"0"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
 	"filament_notes": [
 		""
 	],
@@ -164,21 +137,6 @@
 	"filament_soluble": [
 		"0"
 	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
 	"filament_vendor": [
 		"Elas"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
@@ -71,15 +71,6 @@
 	"fan_min_speed": [
 		"100"
 	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
 	"filament_cost": [
 		"500"
 	],
@@ -98,30 +89,12 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
 	"filament_long_retractions_when_cut": [
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"0"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
 	"filament_notes": [
 		""
 	],
@@ -164,21 +137,6 @@
 	"filament_soluble": [
 		"0"
 	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
 	"filament_vendor": [
 		"Elas"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo
@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"nozzle_temperature": [
 		"290"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo
@@ -35,6 +35,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_vendor": [
 		"Elegoo"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo
@@ -12,6 +12,9 @@
 	"filament_max_volumetric_speed": [
 		"10"
 	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
 	"nozzle_temperature": [
 		"220"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas
@@ -44,5 +44,8 @@
 	],
 	"filament_max_volumetric_speed": [
 		"10"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
 	]
 }
--- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas
@@ -44,5 +44,8 @@
 	],
 	"filament_max_volumetric_speed": [
 		"8"
+	],
+	"filament_multitool_ramming_flow": [
+		"8"
 	]
 }
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -10,5 +10,8 @@
 	"filament_type": [
 		"PA-CF"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"compatible_printers": []
 }
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -8,5 +8,8 @@
 	"filament_max_volumetric_speed": [
 		"20"
 	],
+	"filament_multitool_ramming_flow": [
+		"20"
+	],
 	"compatible_printers": []
 }
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -17,6 +17,9 @@
 	"filament_max_volumetric_speed": [
 		"11.5"
 	],
+	"filament_multitool_ramming_flow": [
+		"13"
+	],
 	"overhang_fan_speed": [
 		"100"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -12,6 +12,9 @@
 	"filament_max_volumetric_speed": [
 		"18"
 	],
+	"filament_multitool_ramming_flow": [
+		"25"
+	],
 	"slow_down_layer_time": [
 		"4"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -8,6 +8,9 @@
 	"filament_max_volumetric_speed": [
 		"11"
 	],
+	"filament_multitool_ramming_flow": [
+		"11"
+	],
 	"filament_retraction_length": [
 		"0.8"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -15,6 +15,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_type": [
 		"PP-CF"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -15,6 +15,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_type": [
 		"PP-GF"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture
@@ -17,6 +17,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_vendor": [
 		"Overture"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment
@@ -23,6 +23,9 @@
 	"filament_max_volumetric_speed": [
 		"7.5"
 	],
+	"filament_multitool_ramming_flow": [
+		"7.5"
+	],
 	"filament_vendor": [
 		"Valment"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json
@@ -43,6 +43,12 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"15"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
 	"filament_type": [
 		"ABS"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json
@@ -43,6 +43,12 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
 	"filament_type": [
 		"ASA"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json
@@ -41,6 +41,15 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
+	"filament_multitool_ramming_volume": [
+		"0.1"
+	],
 	"filament_type": [
 		"BVOH"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_common.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_common.json
@@ -66,6 +66,12 @@
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_volume": [
+		"5"
+	],
 	"filament_retract_before_wipe": [
 		"nil"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_cope.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_cope.json
@@ -41,6 +41,9 @@
 	"filament_max_volumetric_speed": [
 		"16"
 	],
+	"filament_multitool_ramming_flow": [
+		"16"
+	],
 	"filament_scarf_seam_type": [
 		"none"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json
@@ -8,6 +8,9 @@
 	"filament_type": [
 		"EVA"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
 	"supertack_plate_temp": [
 		"0"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json
@@ -41,6 +41,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_type": [
 		"HIPS"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json
@@ -44,6 +44,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
 	"filament_type": [
 		"PA"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_paht.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_paht.json
@@ -7,6 +7,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
 	"filament_type": [
 		"PAHT"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json
@@ -86,6 +86,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"16"
+	],
 	"filament_flow_ratio": [
 		"0.94"
 	]
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json
@@ -26,6 +26,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
 	"filament_type": [
 		"PCTG"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json
@@ -38,6 +38,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
 	"filament_type": [
 		"PE"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json
@@ -26,6 +26,9 @@
 	"filament_max_volumetric_speed": [
 		"10"
 	],
+	"filament_multitool_ramming_flow": [
+		"15"
+	],
 	"filament_type": [
 		"PETG"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json
@@ -38,6 +38,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_type": [
 		"PHA"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json
@@ -38,6 +38,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"20"
+	],
 	"filament_scarf_seam_type": [
 		"none"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json
@@ -9,6 +9,9 @@
 	"filament_flow_ratio": [
 		"0.98"
 	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
 	"slow_down_layer_time": [
 		"8"
 	]
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json
@@ -38,6 +38,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
 	"filament_type": [
 		"PP"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json
@@ -47,6 +47,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_type": [
 		"PPA-CF"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json
@@ -43,6 +43,9 @@
 	"filament_max_volumetric_speed": [
 		"4"
 	],
+	"filament_multitool_ramming_flow": [
+		"4"
+	],
 	"filament_type": [
 		"PPS"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json
@@ -40,6 +40,15 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
+	"filament_multitool_ramming_volume": [
+		"0.1"
+	],
 	"filament_soluble": [
 		"1"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json
@@ -11,6 +11,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
 	"filament_type": [
 		"SBS"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json
@@ -43,6 +43,15 @@
 	"filament_max_volumetric_speed": [
 		"3.2"
 	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"3.2"
+	],
+	"filament_multitool_ramming_volume": [
+		"0.1"
+	],
 	"filament_retraction_length": [
 		"0.4"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN
+++ b/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN
@@ -17,6 +17,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_vendor": [
 		"eSUN"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN
+++ b/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN
@@ -17,6 +17,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_vendor": [
 		"eSUN"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN
+++ b/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN
@@ -21,6 +21,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_vendor": [
 		"eSUN"
 	],
--- a/resources/profiles/Snapmaker.json
+++ b/resources/profiles/Snapmaker.json
@@ -1,6 +1,6 @@
 {
 	"name": "Snapmaker",
-	"version": "02.04.00.07",
+	"version": "02.04.00.08",
 	"force_update": "0",
 	"description": "Snapmaker configurations",
 	"machine_model_list": [
@@ -426,10 +426,6 @@
 			"name": "0.16 Optimal @Snapmaker U1 (0.4 nozzle)",
 			"sub_path": "process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json"
 		},
-		{
-			"name": "0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle)",
-			"sub_path": "process/0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle).json"
-		},
 		{
 			"name": "0.20 Quality @Snapmaker U1 (0.4 nozzle)",
 			"sub_path": "process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json"
@@ -486,6 +482,66 @@
 			"name": "fdm_process_U1_0.8_common",
 			"sub_path": "process/fdm_process_U1_0.8_common.json"
 		},
+		{
+			"name": "fdm_process_U1_0.06_nozzle_0.2",
+			"sub_path": "process/fdm_process_U1_0.06_nozzle_0.2.json"
+		},
+		{
+			"name": "fdm_process_U1_0.08_nozzle_0.2",
+			"sub_path": "process/fdm_process_U1_0.08_nozzle_0.2.json"
+		},
+		{
+			"name": "fdm_process_U1_0.10_nozzle_0.2",
+			"sub_path": "process/fdm_process_U1_0.10_nozzle_0.2.json"
+		},
+		{
+			"name": "fdm_process_U1_0.12_nozzle_0.2",
+			"sub_path": "process/fdm_process_U1_0.12_nozzle_0.2.json"
+		},
+		{
+			"name": "fdm_process_U1_0.14_nozzle_0.2",
+			"sub_path": "process/fdm_process_U1_0.14_nozzle_0.2.json"
+		},
+		{
+			"name": "fdm_process_U1_0.18_nozzle_0.6",
+			"sub_path": "process/fdm_process_U1_0.18_nozzle_0.6.json"
+		},
+		{
+			"name": "fdm_process_U1_0.24_nozzle_0.6",
+			"sub_path": "process/fdm_process_U1_0.24_nozzle_0.6.json"
+		},
+		{
+			"name": "fdm_process_U1_0.24_nozzle_0.8",
+			"sub_path": "process/fdm_process_U1_0.24_nozzle_0.8.json"
+		},
+		{
+			"name": "fdm_process_U1_0.30_nozzle_0.6",
+			"sub_path": "process/fdm_process_U1_0.30_nozzle_0.6.json"
+		},
+		{
+			"name": "fdm_process_U1_0.32_nozzle_0.8",
+			"sub_path": "process/fdm_process_U1_0.32_nozzle_0.8.json"
+		},
+		{
+			"name": "fdm_process_U1_0.36_nozzle_0.6",
+			"sub_path": "process/fdm_process_U1_0.36_nozzle_0.6.json"
+		},
+		{
+			"name": "fdm_process_U1_0.40_nozzle_0.8",
+			"sub_path": "process/fdm_process_U1_0.40_nozzle_0.8.json"
+		},
+		{
+			"name": "fdm_process_U1_0.42_nozzle_0.6",
+			"sub_path": "process/fdm_process_U1_0.42_nozzle_0.6.json"
+		},
+		{
+			"name": "fdm_process_U1_0.48_nozzle_0.8",
+			"sub_path": "process/fdm_process_U1_0.48_nozzle_0.8.json"
+		},
+		{
+			"name": "fdm_process_U1_0.56_nozzle_0.8",
+			"sub_path": "process/fdm_process_U1_0.56_nozzle_0.8.json"
+		},
 		{
 			"name": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)",
 			"sub_path": "process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json"
@@ -1508,10 +1564,6 @@
 			"name": "Snapmaker PLA Metal @U1",
 			"sub_path": "filament/Snapmaker PLA Metal @U1.json"
 		},
-		{
-			"name": "Snapmaker PLA Silk @U1",
-			"sub_path": "filament/Snapmaker PLA Silk @U1.json"
-		},
 		{
 			"name": "Snapmaker PLA Silk",
 			"sub_path": "filament/Snapmaker PLA Silk.json"
@@ -1671,6 +1723,214 @@
 		{
 			"name": "Snapmaker PLA Matte @U1 base",
 			"sub_path": "filament/Snapmaker PLA Matte @U1 base.json"
+		},
+		{
+			"name": "Polymaker PLA @U1 base",
+			"sub_path": "filament/Polymaker PLA @U1 base.json"
+		},
+		{
+			"name": "Polymaker Silk PLA Family @U1",
+			"sub_path": "filament/Polymaker Silk PLA Family @U1.json"
+		},
+		{
+			"name": "Polymaker Tough PLA Family @U1",
+			"sub_path": "filament/Polymaker Tough PLA Family @U1.json"
+		},
+		{
+			"name": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG HF @U1 base2",
+			"sub_path": "filament/Snapmaker PETG HF @U1 base2.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 base",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 base.json"
+		},
+		{
+			"name": "Snapmaker PLA Basic @U1 base",
+			"sub_path": "filament/Snapmaker PLA Basic @U1 base.json"
+		},
+		{
+			"name": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Glow @U1 base",
+			"sub_path": "filament/Snapmaker PLA Glow @U1 base.json"
+		},
+		{
+			"name": "Snapmaker PLA Matte @U1 base2",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 base2.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker PLA Silk @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PLA Silk @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PLA Silk @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 base2",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 base2.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 base",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 base.json"
+		},
+		{
+			"name": "Snapmaker PLA Wood @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PLA Wood @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Wood @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PLA Wood @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Wood @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PLA Wood @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA-CF @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PLA-CF @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA-CF @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PLA-CF @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA-CF @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PLA-CF @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PVA @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PVA @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PVA @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PVA @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 90A @U1",
+			"sub_path": "filament/Snapmaker TPU 90A @U1.json"
+		},
+		{
+			"name": "Snapmaker TPU 90A @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker TPU 90A @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 90A @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker TPU 90A @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 95A HF @U1",
+			"sub_path": "filament/Snapmaker TPU 95A HF @U1.json"
+		},
+		{
+			"name": "Snapmaker TPU 95A HF @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 95A HF @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1",
+			"sub_path": "filament/Snapmaker PLA Silk @U1.json"
+		},
+		{
+			"name": "Polymaker General PLA Family @U1",
+			"sub_path": "filament/Polymaker General PLA Family @U1.json"
+		},
+		{
+			"name": "Snapmaker PETG HF @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG HF @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG HF @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Basic @U1",
+			"sub_path": "filament/Snapmaker PLA Basic @U1.json"
+		},
+		{
+			"name": "Snapmaker PLA Glow @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PLA Glow @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Matte @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Matte @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Matte @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json"
 		}
 	],
 	"machine_list": [
--- a/resources/profiles/Snapmaker/filament/Polymaker
+++ b/resources/profiles/Snapmaker/filament/Polymaker
@@ -0,0 +1,32 @@
+{
+	"type": "filament",
+	"name": "Polymaker General PLA Family @U1",
+	"inherits": "Polymaker PLA @U1 base",
+	"from": "system",
+	"setting_id": "thXfSaUkOAKJ50ey",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"15"
+	],
+	"filament_vendor": [
+		"Polymaker"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"temperature_vitrification": [
+		"62"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}
--- a/resources/profiles/Snapmaker/filament/Polymaker
+++ b/resources/profiles/Snapmaker/filament/Polymaker
@@ -0,0 +1,107 @@
+{
+	"type": "filament",
+	"name": "Polymaker PLA @U1 base",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"filament_id": "OGFL99",
+	"instantiation": "false",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"45"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		"; Filament gcode\n"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	]
+}
--- a/resources/profiles/Snapmaker/filament/Polymaker
+++ b/resources/profiles/Snapmaker/filament/Polymaker
@@ -0,0 +1,32 @@
+{
+	"type": "filament",
+	"name": "Polymaker Silk PLA Family @U1",
+	"inherits": "Polymaker PLA @U1 base",
+	"from": "system",
+	"setting_id": "h8vIYpXbxFtHPV6e",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_density": [
+		"1.34"
+	],
+	"filament_vendor": [
+		"Polymaker"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}
--- a/resources/profiles/Snapmaker/filament/Polymaker
+++ b/resources/profiles/Snapmaker/filament/Polymaker
@@ -0,0 +1,32 @@
+{
+	"type": "filament",
+	"name": "Polymaker Tough PLA Family @U1",
+	"inherits": "Polymaker PLA @U1 base",
+	"from": "system",
+	"setting_id": "d6CC81Es2hp46bto",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_vendor": [
+		"Polymaker"
+	],
+	"slow_down_layer_time": [
+		"6"
+	],
+	"temperature_vitrification": [
+		"55"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon
@@ -11,7 +11,6 @@
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
 	],
-
 	"pressure_advance": [
 		"0.05"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon
@@ -17,7 +17,6 @@
 	"filament_z_hop": [
 		"0.0"
 	],
-
 	"enable_pressure_advance": [
 		"1"
 	],
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon
@@ -17,7 +17,6 @@
 	"filament_z_hop": [
 		"0.0"
 	],
-
 	"enable_pressure_advance": [
 		"1"
 	],
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon
@@ -17,7 +17,6 @@
 	"supertack_plate_temp_initial_layer": [
 		"70"
 	],
-
 	"pressure_advance": [
 		"0.04"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyLite Dual PLA @0.2 nozzle",
-	"setting_id": "jhmy4YHi9MuL0DWu",
 	"inherits": "PolyLite PLA @0.2 nozzle",
+	"from": "system",
+	"setting_id": "jhmy4YHi9MuL0DWu",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker A250 Dual (0.2 nozzle)",
 		"Snapmaker A250 Dual BKit (0.2 nozzle)",
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyLite J1 PLA @0.2 nozzle",
-	"setting_id": "jFlRSxx0KvN3BOUu",
 	"inherits": "PolyLite PLA @0.2 nozzle",
+	"from": "system",
+	"setting_id": "jFlRSxx0KvN3BOUu",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker J1 (0.2 nozzle)"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyLite J1 PLA",
-	"setting_id": "wcpOTTMyZNPFKyXr",
 	"inherits": "PolyLite PLA @base",
+	"from": "system",
+	"setting_id": "wcpOTTMyZNPFKyXr",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker J1 (0.4 nozzle)",
 		"Snapmaker J1 (0.6 nozzle)",
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
@@ -1,4 +1,9 @@
 {
+	"type": "filament",
+	"name": "PolyLite PETG @Base",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"instantiation": "false",
 	"filament_density": [
 		"1.25"
 	],
@@ -18,11 +23,6 @@
 		"0"
 	],
 	"description": "",
-	"inherits": "fdm_filament_petg",
-	"name": "PolyLite PETG @Base",
-	"type": "filament",
-	"instantiation": "false",
-	"from": "system",
 	"filament_vendor": [
 		"Polymaker"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
@@ -17,7 +17,6 @@
 	"supertack_plate_temp_initial_layer": [
 		"70"
 	],
-
 	"pressure_advance": [
 		"0.05"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
@@ -17,7 +17,6 @@
 	"supertack_plate_temp_initial_layer": [
 		"70"
 	],
-
 	"pressure_advance": [
 		"0.05"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyLite PLA @0.2 nozzle",
-	"setting_id": "s9mdMaFca8SHfji9",
 	"inherits": "PolyLite PLA @base",
+	"from": "system",
+	"setting_id": "s9mdMaFca8SHfji9",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker A250 (0.2 nozzle)",
 		"Snapmaker A250 BKit (0.2 nozzle)",
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "PolyLite PLA @base",
-	"filament_id": "1393866034",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"filament_id": "1393866034",
+	"instantiation": "false",
 	"filament_flow_ratio": [
 		"0.95"
 	],
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra
@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyTerra Dual PLA @0.2 nozzle",
-	"setting_id": "UQYgjH1uVxf3d2Nv",
 	"inherits": "PolyTerra PLA @0.2 nozzle",
+	"from": "system",
+	"setting_id": "UQYgjH1uVxf3d2Nv",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker A250 Dual (0.2 nozzle)",
 		"Snapmaker A250 Dual BKit (0.2 nozzle)",
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra
@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyTerra J1 PLA @0.2 nozzle",
-	"setting_id": "mxKHxGmBZzPLS82O",
 	"inherits": "PolyTerra PLA @0.2 nozzle",
+	"from": "system",
+	"setting_id": "mxKHxGmBZzPLS82O",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker J1 (0.2 nozzle)"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra
@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyTerra J1 PLA",
-	"setting_id": "4MZWZX7QPBzxdEGj",
 	"inherits": "PolyTerra PLA @base",
+	"from": "system",
+	"setting_id": "4MZWZX7QPBzxdEGj",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker J1 (0.4 nozzle)",
 		"Snapmaker J1 (0.6 nozzle)",
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra
@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyTerra PLA @0.2 nozzle",
-	"setting_id": "6W1ygT08NordBdIW",
 	"inherits": "PolyTerra PLA @base",
+	"from": "system",
+	"setting_id": "6W1ygT08NordBdIW",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker A250 (0.2 nozzle)",
 		"Snapmaker A250 BKit (0.2 nozzle)",
--- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker
@@ -1,4 +1,9 @@
 {
+	"type": "filament",
+	"name": "Polymaker HT-PLA @Base",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"instantiation": "false",
 	"filament_density": [
 		"1.28"
 	],
@@ -18,11 +23,6 @@
 		"0"
 	],
 	"description": "",
-	"inherits": "fdm_filament_pla",
-	"name": "Polymaker HT-PLA @Base",
-	"type": "filament",
-	"instantiation": "false",
-	"from": "system",
 	"filament_vendor": [
 		"Polymaker"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker
@@ -1,4 +1,9 @@
 {
+	"type": "filament",
+	"name": "Polymaker HT-PLA-GF @Base",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"instantiation": "false",
 	"filament_density": [
 		"1.34"
 	],
@@ -18,11 +23,6 @@
 		"0"
 	],
 	"description": "",
-	"inherits": "fdm_filament_pla",
-	"name": "Polymaker HT-PLA-GF @Base",
-	"type": "filament",
-	"instantiation": "false",
-	"from": "system",
 	"filament_vendor": [
 		"Polymaker"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker
@@ -1,4 +1,9 @@
 {
+	"type": "filament",
+	"name": "Polymaker PETG @Base",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"instantiation": "false",
 	"filament_density": [
 		"1.3"
 	],
@@ -18,11 +23,6 @@
 		"0"
 	],
 	"description": "",
-	"inherits": "fdm_filament_petg",
-	"name": "Polymaker PETG @Base",
-	"type": "filament",
-	"instantiation": "false",
-	"from": "system",
 	"filament_vendor": [
 		"Polymaker"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker
@@ -1,4 +1,9 @@
 {
+	"type": "filament",
+	"name": "Polymaker PLA Pro @Base",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"instantiation": "false",
 	"filament_density": [
 		"1.23"
 	],
@@ -18,11 +23,6 @@
 		"0"
 	],
 	"description": "",
-	"inherits": "fdm_filament_pla",
-	"name": "Polymaker PLA Pro @Base",
-	"type": "filament",
-	"instantiation": "false",
-	"from": "system",
 	"filament_vendor": [
 		"Polymaker"
 	]
--- a/resources/profiles/Snapmaker/filament/Snapmaker
+++ b/resources/profiles/Snapmaker/filament/Snapmaker
@@ -7,5 +7,8 @@
 	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_retract_length_toolchange": [
+		"5"
 	]
 }
--- a/resources/profiles/Snapmaker/filament/Snapmaker
+++ b/resources/profiles/Snapmaker/filament/Snapmaker
@@ -7,5 +7,8 @@
 	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_retract_length_toolchange": [
+		"5"
 	]
 }
--- a/resources/profiles/Snapmaker/filament/Snapmaker
+++ b/resources/profiles/Snapmaker/filament/Snapmaker
@@ -0,0 +1,104 @@
+{
+	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle",
+	"inherits": "Snapmaker Breakaway Support @base",
+	"from": "system",
+	"setting_id": "mJoaud6wulT4p8SA",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 nozzle)"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_cost": [
+		"69.98"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"0.5"
+	],
+	"filament_retract_length_toolchange": [
+		"10"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"pressure_advance": [
+		"0.2"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"5"
+	],
+	"filament_multitool_ramming_volume": [
+		"5"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	]
+}
--- a/resources/profiles/Snapmaker/filament/Snapmaker
+++ b/resources/profiles/Snapmaker/filament/Snapmaker
@@ -0,0 +1,104 @@
+{
+	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle",
+	"inherits": "Snapmaker Breakaway Support @base",
+	"from": "system",
+	"setting_id": "rKUUREJNhstIU0I2",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"filament_cost": [
+		"69.98"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_retract_length_toolchange": [
+		"10"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"20"
+	],
+	"filament_multitool_ramming_volume": [
+		"5"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	]
+}
--- a/resources/profiles/Snapmaker/filament/Snapmaker
+++ b/resources/profiles/Snapmaker/filament/Snapmaker
@@ -0,0 +1,98 @@
+{
+	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle",
+	"inherits": "Snapmaker Breakaway Support @base",
+	"from": "system",
+	"setting_id": "hQ8jQ5GKQKGKuPew",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"filament_cost": [
+		"69.98"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_retract_length_toolchange": [
+		"10"
+	],
+	"filament_retraction_length": [
+		"3"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"pressure_advance": [
+		"0.015"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"20"
+	],
+	"filament_multitool_ramming_volume": [
+		"5"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"textured_plate_temp": [
+		"65"
+	]
+}
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
SoftFever	6312caaf13	Add filament_retract_length_toolchange/filament_retract_restart_extra_toolchange config and update tool changer printer's profiles (#15039 ) * update snapmaker profiles. largely ported for Snapmaker Orca fork * update prime volume * set precise_outer_wall to 1 * Update per-material multi-tool ramming to the filament library * Add per-filament overrides for toolchange retraction * Set toolchange retraction per filament for Snapmaker U1 * set default support type to tree * format snapmaker profiles	2026-08-05 00:13:27 +08:00
SoftFever	0051768206	Smooth out the spiral lift when arc fitting is disabled (#15118 ) The linear approximation used a heuristic segment count clamped to 4..16, so the lift ran as a coarse polygon. Every vertex is a direction change large enough to hit the firmware's jerk limit, forcing a decelerate/accelerate at each corner — the lift micro-stutters instead of running at speed. The segment count now comes from the chord deviation against the slicing resolution, reusing Geometry::ArcWelder::arc_discretization_steps, which keeps the turn at each vertex shallow enough for the firmware to carry speed through the whole move. Points are emitted through GCodeG1Formatter so they carry the same quantization as the rest of the G-code, and the move comment now trails the feedrate line to match _travel_to_z and the G2/G3 branch. No change when arc fitting is enabled.	2026-08-05 00:09:46 +08:00
Ian Bassi	1d078e005a	Mouse ear Wiki redirect (#15115 ) Based in https://github.com/OrcaSlicer/OrcaSlicer/pull/15015 and https://github.com/OrcaSlicer/OrcaSlicer_WIKI/pull/323	2026-08-04 11:37:05 -03:00
Kris Austin	82759d3899	fix: make the error dialog caret point at the character it's blaming (#14886 ) * fix: make the error dialog caret point at the character it's blaming Custom G-code parse errors print the offending line with a '^' under the character that broke, positioned with spaces so it only lines up in a fixed-width font. Since v2.3.2 these dialogs rendered entirely in the proportional UI font, so the caret drifted left of its column and landed on unrelated text. Render only the code excerpts (the offending source line and its caret) in the fixed-width face, leaving the surrounding prose in the UI font, and reserve the horizontal scrollbar's height so a long line does not clip. Rename the flag to has_code_excerpts to match what it now means. Fixes #14869 * refactor(GUI): use <code> instead of <tt> for error excerpts wxHTML maps <tt>, <code>, <kbd> and <samp> to the same fixed-width handler, so this renders identically. <code> is the non-deprecated tag and matches what the original code used. * fix(GUI): align the error caret with real spaces, not   The caret line was padded with   so its spaces would survive inline HTML. wxHTML measures every glyph by its font extent, so where the fixed font lacks a U+00A0 glyph the fallback renders it about twice as wide, and the all-  caret line outran the source, drifting the ^ to the right. Wrap the excerpts in a small <excerpt> tag, registered on the dialog's own parser, that switches on wxHTML literal-whitespace mode so the caret uses real spaces that match the source column in any font. It sits inside <code> for the fixed face; <pre> would do both but forces a blank line above it. --------- Co-authored-by: Noisyfox <timemanager.rick@gmail.com>	2026-08-04 22:01:45 +08:00
Ian Bassi	59155f26ac	Build Arch Fix (#15107 ) Arch Fix	2026-08-04 21:56:15 +08:00
yw4z	40eab797c6	match em_unit value for on_dpi_change for linux (#15043 ) * Update GUI_Utils.hpp * Update GUI_Utils.hpp	2026-08-04 08:45:31 +08:00
Kiss Lorand	ca7fbfb007	Fix missing overhang wall when no partial counterbore bridge is generated (#15100 )	2026-08-03 18:02:48 -03:00
Mikhail f. Shiryaev	7b404596e9	Add `Skip G-code config block` to exclude the config comments from G-code files (#12455 ) Add feature to skip CONFIG_BLOCK in G-code files	2026-08-03 15:10:01 -03:00
Kris Austin	06ef58bad8	test: replace the disabled convex_hull_2d test (#14892 ) test(libslic3r): replace the disabled convex_hull_2d test, closing #11269 The last "failing libslic3r test" from #11269 was the disabled SCENARIO("2D convex hull of sinking object", "[3mf][.]") in test_3mf.cpp. It checked ModelObject::convex_hull_2d for a sinking object against PrusaSlicer's reference hull, but Orca's convex_hull_2d does not clip geometry below the bed the way PrusaSlicer's its_convex_hull_2d_above does, so the reference never matched. The test also wrote a debug mesh to a hardcoded /tmp path and its comparison loop was inverted. Remove it and add tests/libslic3r/test_model.cpp characterizing convex_hull_2d on non-sinking transforms (identity and scale+offset), where the projected footprint is unambiguous. Homed in a Model test file since it exercises ModelObject, not 3MF.	2026-08-03 22:29:00 +08:00
SoftFever	74c4a7e450	Support printer specific filament profiles in the OrcaFilamentLibrary (#15101 ) * Support printer specific filament profiles in the Orca Filament Library	2026-08-03 22:25:50 +08:00
Noisyfox	dbb991bf07	Fix gizmo being closed after releasing mouse outside the gizmo floating window (#15095 ) * Fix gizmo being closed after releasing mouse outside the gizmo floating window The left up event of a drag started on the gizmo floating window (e.g. selecting text in an input field) and released over the bed was treated as a click on the plate, which deselected the objects and closed the active gizmo. Add the ignore_left_up guard to the plate select branch, matching the deselect branch above. Co-Authored-By: Claude <noreply@anthropic.com> * Fix Emboss gizmo being closed after releasing mouse outside its floating window The Emboss gizmo has its own close-on-click-away handler (on_mouse_change_selection) that was not protected against left up events originating from ImGui windows, so the gizmo was still closed when a drag started on its floating window (e.g. selecting text in the input field) ended over the 3D scene. Expose the canvas's ignore_left_up state to gizmos and skip the close check for such releases. Co-Authored-By: Claude <noreply@anthropic.com> --------- Co-authored-by: Claude <noreply@anthropic.com>	2026-08-03 18:34:15 +08:00
Noisyfox	66d3f3f9c3	imgui: Clamp mouse y-coordinate in multi-line click/drag to text bounds (#15052 ) * imgui: Clamp mouse y-coordinate in multi-line click/drag to text bounds In single-line mode, click and drag already clamped y to the line's y-coordinate so the cursor would continue to follow the x-position when the mouse went off the top or bottom of the text. Multi-line mode did not clamp, so stb_text_locate_coord() would return 0 (above) or n (below), snapping the cursor to the very start or end of text and ignoring the x-coordinate entirely. Now both modes walk the row layout to compute the top of the first row (y_min) and bottom of the last row (y_max, minus half a line height to add tolerance for rounding), then clamp y to that range before passing it to stb_text_locate_coord(). This means dragging or clicking above the text now places the cursor on the first line at the x-coordinate, and dragging/clicking below places it on the last line at the x-coordinate, matching the single-line precedent. * Fix issue that cursor cannot be placed at the last empty line	2026-08-03 18:34:05 +08:00
Ryan Hartman	6b5c8af1c8	Pin OpenSSL libdir so the bundled Python finds it (#15047 ) On Linux the bundled CPython silently links the system OpenSSL instead of the one built in deps/, and the dependency build then fails: install: cannot stat 'Modules/_ssl.cpython-312-x86_64-linux-gnu.so': No such file or directory The chain: * OpenSSL's linux-x86_64 target sets multilib=64, so 'make install_sw' installs the static libs to <prefix>/lib64 while every other dependency in the prefix uses <prefix>/lib. * CPython's --with-openssl=<dir> only ever emits -L<dir>/lib. It does not look in lib64, so -lssl resolves to the system OpenSSL. * gcc -shared does not error on unresolved symbols, so the link appears to succeed. _ssl.c was compiled against the bundled 1.1.1w headers, which map SSL_get1_peer_certificate onto the pre-3.0 SSL_get_peer_certificate -- a symbol OpenSSL 3.x removed. The module then fails to import: _ssl failed to import: undefined symbol: SSL_get_peer_certificate Could not build the ssl module! * With no _ssl built, 'make install' cannot stat it and the build stops. Passing --libdir=lib keeps the prefix single-layout, so CPython's -L<dir>/lib finds the bundled static libraries and links against the headers it was compiled with. CMake-based dependencies were unaffected throughout, because CMake's FindOpenSSL searches lib64 on its own; only CPython's autoconf path is sensitive to this. Affects any distribution where OpenSSL selects the lib64 layout, which is the Fedora, openSUSE and Arch families. Debian and Ubuntu are unaffected, which is why CI has not seen it. Verified on Arch (GCC 16.1.1, CMake 4.4.2): the dependency build completes and the bundled interpreter reports the bundled OpenSSL rather than the system one: $ deps/build/OrcaSlicer_dep/usr/local/libpython/bin/python3.12 \ -c 'import ssl; print(ssl.OPENSSL_VERSION)' OpenSSL 1.1.1w 11 Sep 2023 Not verified on macOS or Windows. The flag is accepted by OpenSSL's Configure on all platforms and Darwin targets do not set multilib, so it should be a no-op there, but CI is the check.	2026-08-03 11:03:59 +08:00
yw4z	e72a3a65b2	QOL Continue to capture mouse position while dragging ImGui controls and mouse position goes to outside of window (#14999 ) * Update GLCanvas3D.cpp * support navigation cube * capture events for transform widgets * camera rotation and pan * selection frame * object drag * fix navigation cube stealing drag events * fix lag on navigation cuve * variable layer height * fix plates toolbar scrollbar * Update GLCanvas3D.cpp * Fix issue that mouse button state is wrong in certain macOS mouse events --------- Co-authored-by: Noisyfox <timemanager.rick@gmail.com>	2026-08-02 18:59:53 +08:00
Misterff1	1b71835337	Fixed some desktop environments showing title bar on splash screen when running on Wayland (#15019 ) * Remove titlebar from splash screen on Wayland * Broadly check for window decorations and added explanatory description * Fixed hiding title bar on Wayland for all desktop environments * Update format --------- Co-authored-by: noisyfox <timemanager.rick@gmail.com>	2026-08-02 18:58:49 +08:00
Dipl.-Ing. Raoul Rubien, BSc	f9fa1c117f	Define WXINSPECTOR_DISABLE globally to prevent include-order-dependent class layout (#15063 ) fix: define WXINSPECTOR_DISABLE globally to prevent include-order-dependent class layouts	2026-08-02 18:20:35 +08:00
Kiss Lorand	6f3ca7d1b9	Fix preview speeds and time estimates after firmware retract commands (#15066 )	2026-08-02 00:01:19 -03:00
maddavo	13ae3a1c90	Add outer-only mouse ears and align ear radius controls (#15015 ) Improve mouse ear brim controls	2026-08-02 10:54:16 +08:00
Valerii Bokhan	fb36d5e73b	Feature: Smooth Factor for the Hilbert Curve sparse infill (#14969 )	2026-08-01 17:58:04 -03:00
GlauTech	abb2ab8d3f	Update OrcaSlicer_tr.po (#15060 )	2026-08-01 23:26:26 +03:00