Merge branch 'main' into feat/plugin-storage-api

Make the wipe tower's planner flush and dwell work on Klipper (#15133 )
# Description On Klipper the wipe tower's motion-queue synchronization silently did nothing. Klipper acts on commands the moment it parses them, and its `G4` reads only `P` in milliseconds — it ignores `S` — so the `G4 S0` the tower used to flush the queue before a temperature change never synchronized anything, and the cooling delay after a filament's cooling moves passed instantly instead of waiting. The tower now emits `M400` for the flush and `G4 P<ms>` for the dwell when the flavor is Klipper. Only `gcode_flavor = klipper` is affected; G-code for every other flavor is byte-identical, so no shipped profile or existing project file changes. # Screenshots/Recordings/Graphs  ## Tests   [How to Download Pull Requests Artifacts for Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
2026-08-07 00:08:08 +03:00 · 2026-08-05 20:11:29 +08:00 · 2026-08-05 18:21:05 +08:00 · 2026-08-05 18:09:36 +08:00 · 2026-08-05 17:25:23 +08:00 · 2026-08-05 17:15:35 +08:00
271 changed files with 11601 additions and 1715 deletions
--- a/deps_src/imgui/imstb_textedit.h
+++ b/deps_src/imgui/imstb_textedit.h
@@ -465,6 +465,57 @@ static void stb_textedit_click(STB_TEXTEDIT_STRING *str, STB_TexteditState *stat
      STB_TEXTEDIT_LAYOUTROW(&r, str, 0);
      y = r.ymin;
   }
+   else
+   {
+      // In multi-line mode, clamp y to stay within the text vertical bounds.
+      // This lets the click still land at a valid location if the mouse is slightly
+      // above or below the text.
+      StbTexteditRow r;
+      int n = STB_TEXTEDIT_STRINGLEN(str);
+      int i = 0;
+      float base_y = 0, y_min, y_max;
+
+      // Get the first row to establish y_min and start the iteration
+      STB_TEXTEDIT_LAYOUTROW(&r, str, 0);
+      if (r.num_chars <= 0)
+      {
+         state->cursor = 0;
+         state->select_start = state->cursor;
+         state->select_end = state->cursor;
+         state->has_preferred_x = 0;
+         return;
+      }
+      y_min = r.ymin;
+      y_max = base_y + r.ymax;
+      i = r.num_chars;
+      base_y += r.baseline_y_delta;
+
+      // Walk the remaining rows to find the bottom of the last row
+      while (i < n)
+      {
+         STB_TEXTEDIT_LAYOUTROW(&r, str, i);
+         if (r.num_chars <= 0)
+            break;
+         y_max = base_y + r.ymax;
+         i += r.num_chars;
+         base_y += r.baseline_y_delta;
+      }
+
+      // If the text ends with a newline, account for the empty trailing line
+      // so the cursor can be placed on it
+      if (n > 0 && STB_TEXTEDIT_GETCHAR(str, n - 1) == STB_TEXTEDIT_NEWLINE)
+      {
+         STB_TEXTEDIT_LAYOUTROW(&r, str, n);
+         y_max = base_y + r.ymax;
+      }
+
+      // Subtract half the last line height to avoid rounding issues when the mouse
+      // is just barely below the last line (keep cursor on the last line, not after the text)
+      y_max -= (r.ymax - r.ymin) * 0.5f;
+
+      if (y < y_min) y = y_min;
+      if (y > y_max) y = y_max;
+   }

   state->cursor = stb_text_locate_coord(str, x, y);
   state->select_start = state->cursor;
@@ -485,6 +536,50 @@ static void stb_textedit_drag(STB_TEXTEDIT_STRING *str, STB_TexteditState *state
      STB_TEXTEDIT_LAYOUTROW(&r, str, 0);
      y = r.ymin;
   }
+   else
+   {
+      // In multi-line mode, clamp y to stay within the text vertical bounds.
+      // This lets the drag keep working if the mouse goes off the top or bottom of the text.
+      StbTexteditRow r;
+      int n = STB_TEXTEDIT_STRINGLEN(str);
+      int i = 0;
+      float base_y = 0, y_min, y_max;
+
+      // Get the first row to establish y_min and start the iteration
+      STB_TEXTEDIT_LAYOUTROW(&r, str, 0);
+      if (r.num_chars <= 0)
+         return;
+      y_min = r.ymin;
+      y_max = base_y + r.ymax;
+      i = r.num_chars;
+      base_y += r.baseline_y_delta;
+
+      // Walk the remaining rows to find the bottom of the last row
+      while (i < n)
+      {
+         STB_TEXTEDIT_LAYOUTROW(&r, str, i);
+         if (r.num_chars <= 0)
+            break;
+         y_max = base_y + r.ymax;
+         i += r.num_chars;
+         base_y += r.baseline_y_delta;
+      }
+
+      // If the text ends with a newline, account for the empty trailing line
+      // so the cursor can be placed on it
+      if (n > 0 && STB_TEXTEDIT_GETCHAR(str, n - 1) == STB_TEXTEDIT_NEWLINE)
+      {
+         STB_TEXTEDIT_LAYOUTROW(&r, str, n);
+         y_max = base_y + r.ymax;
+      }
+
+      // Subtract half the last line height to avoid rounding issues when the mouse
+      // is just barely below the last line (keep cursor on the last line, not after the text)
+      y_max -= (r.ymax - r.ymin) * 0.5f;
+
+      if (y < y_min) y = y_min;
+      if (y > y_max) y = y_max;
+   }

   if (state->select_start == state->select_end)
      state->select_start = state->cursor;
--- a/resources/profiles/Custom.json
+++ b/resources/profiles/Custom.json
@@ -1,6 +1,6 @@
 {
 	"name": "Custom Printer",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "My configurations",
 	"machine_model_list": [
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -24,12 +24,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -24,12 +24,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -24,12 +24,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -24,12 +24,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/filament/Generic
+++ b/resources/profiles/Custom/filament/Generic
@@ -25,12 +25,6 @@
 	"filament_loading_speed_start": [
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
 	"filament_stamping_distance": [
 		"45"
 	],
--- a/resources/profiles/Custom/machine/fdm_klipper_common.json
+++ b/resources/profiles/Custom/machine/fdm_klipper_common.json
@@ -116,7 +116,7 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"z_hop_types": "Normal Lift",
+	"z_hop_types": "Slope Lift",
 	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
--- a/resources/profiles/Custom/machine/fdm_repetier_common.json
+++ b/resources/profiles/Custom/machine/fdm_repetier_common.json
@@ -118,7 +118,7 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"z_hop_types": "Normal Lift",
+	"z_hop_types": "Slope Lift",
 	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
--- a/resources/profiles/Custom/machine/fdm_rrf_common.json
+++ b/resources/profiles/Custom/machine/fdm_rrf_common.json
@@ -116,7 +116,7 @@
 	"deretraction_speed": [
 		"30"
 	],
-	"z_hop_types": "Normal Lift",
+	"z_hop_types": "Slope Lift",
 	"silent_mode": "0",
 	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
--- a/resources/profiles/Custom/machine/fdm_toolchanger_common.json
+++ b/resources/profiles/Custom/machine/fdm_toolchanger_common.json
@@ -172,11 +172,11 @@
 		"0.4"
 	],
 	"z_hop_types": [
-		"Normal Lift",
-		"Normal Lift",
-		"Normal Lift",
-		"Normal Lift",
-		"Normal Lift"
+		"Slope Lift",
+		"Slope Lift",
+		"Slope Lift",
+		"Slope Lift",
+		"Slope Lift"
 	],
 	"purge_in_prime_tower": "0",
 	"machine_pause_gcode": "M601",
--- a/resources/profiles/OrcaFilamentLibrary.json
+++ b/resources/profiles/OrcaFilamentLibrary.json
@@ -1,6 +1,6 @@
 {
 	"name": "OrcaFilamentLibrary",
-	"version": "02.04.00.03",
+	"version": "02.04.00.04",
 	"force_update": "0",
 	"description": "Orca Filament Library",
 	"filament_list": [
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
@@ -36,6 +36,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_type": [
 		"PET-CF"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
@@ -39,6 +39,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_vendor": [
 		"Bambu Lab"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
@@ -39,6 +39,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_vendor": [
 		"Bambu Lab"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
@@ -21,6 +21,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_type": [
 		"PLA-AERO"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
@@ -27,6 +27,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_scarf_seam_type": [
 		"none"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu
@@ -21,6 +21,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_vendor": [
 		"Bambu Lab"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX
+++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX
@@ -36,6 +36,9 @@
 	"filament_max_volumetric_speed": [
 		"1"
 	],
+	"filament_multitool_ramming_flow": [
+		"1"
+	],
 	"filament_retraction_minimum_travel": [
 		"3"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
@@ -72,15 +72,6 @@
 	"fan_min_speed": [
 		"10"
 	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
 	"filament_cost": [
 		"599"
 	],
@@ -99,30 +90,12 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
 	"filament_long_retractions_when_cut": [
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
 		"15"
 	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"0"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
 	"filament_notes": [
 		""
 	],
@@ -165,21 +138,6 @@
 	"filament_soluble": [
 		"0"
 	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
 	"filament_vendor": [
 		"Elas"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
@@ -42,15 +42,6 @@
 	"fan_min_speed": [
 		"20"
 	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
 	"filament_cost": [
 		"445"
 	],
@@ -69,30 +60,12 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
 	"filament_long_retractions_when_cut": [
 		"1"
 	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"0"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
 	"filament_notes": [
 		""
 	],
@@ -135,21 +108,6 @@
 	"filament_soluble": [
 		"0"
 	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
 	"filament_wipe": [
 		"nil"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
@@ -71,15 +71,6 @@
 	"fan_min_speed": [
 		"60"
 	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
 	"filament_cost": [
 		"449.5"
 	],
@@ -98,30 +89,12 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
 	"filament_long_retractions_when_cut": [
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
 		"25"
 	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"0"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
 	"filament_notes": [
 		""
 	],
@@ -164,21 +137,6 @@
 	"filament_soluble": [
 		"0"
 	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
 	"filament_vendor": [
 		"Elas"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas
@@ -71,15 +71,6 @@
 	"fan_min_speed": [
 		"100"
 	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
 	"filament_cost": [
 		"500"
 	],
@@ -98,30 +89,12 @@
 	"filament_is_support": [
 		"0"
 	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
 	"filament_long_retractions_when_cut": [
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"0"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
 	"filament_notes": [
 		""
 	],
@@ -164,21 +137,6 @@
 	"filament_soluble": [
 		"0"
 	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
 	"filament_vendor": [
 		"Elas"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo
@@ -24,6 +24,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"nozzle_temperature": [
 		"290"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo
@@ -35,6 +35,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_vendor": [
 		"Elegoo"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo
@@ -12,6 +12,9 @@
 	"filament_max_volumetric_speed": [
 		"10"
 	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
 	"nozzle_temperature": [
 		"220"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas
@@ -44,5 +44,8 @@
 	],
 	"filament_max_volumetric_speed": [
 		"10"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
 	]
 }
--- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas
@@ -44,5 +44,8 @@
 	],
 	"filament_max_volumetric_speed": [
 		"8"
+	],
+	"filament_multitool_ramming_flow": [
+		"8"
 	]
 }
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -10,5 +10,8 @@
 	"filament_type": [
 		"PA-CF"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"compatible_printers": []
 }
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -8,5 +8,8 @@
 	"filament_max_volumetric_speed": [
 		"20"
 	],
+	"filament_multitool_ramming_flow": [
+		"20"
+	],
 	"compatible_printers": []
 }
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -17,6 +17,9 @@
 	"filament_max_volumetric_speed": [
 		"11.5"
 	],
+	"filament_multitool_ramming_flow": [
+		"13"
+	],
 	"overhang_fan_speed": [
 		"100"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -12,6 +12,9 @@
 	"filament_max_volumetric_speed": [
 		"18"
 	],
+	"filament_multitool_ramming_flow": [
+		"25"
+	],
 	"slow_down_layer_time": [
 		"4"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -8,6 +8,9 @@
 	"filament_max_volumetric_speed": [
 		"11"
 	],
+	"filament_multitool_ramming_flow": [
+		"11"
+	],
 	"filament_retraction_length": [
 		"0.8"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -15,6 +15,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_type": [
 		"PP-CF"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Generic
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic
@@ -15,6 +15,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_type": [
 		"PP-GF"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture
@@ -17,6 +17,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_vendor": [
 		"Overture"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment
@@ -23,6 +23,9 @@
 	"filament_max_volumetric_speed": [
 		"7.5"
 	],
+	"filament_multitool_ramming_flow": [
+		"7.5"
+	],
 	"filament_vendor": [
 		"Valment"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json
@@ -43,6 +43,12 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"15"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
 	"filament_type": [
 		"ABS"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json
@@ -43,6 +43,12 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
 	"filament_type": [
 		"ASA"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json
@@ -41,6 +41,15 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
+	"filament_multitool_ramming_volume": [
+		"0.1"
+	],
 	"filament_type": [
 		"BVOH"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_common.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_common.json
@@ -66,6 +66,12 @@
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
 	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_volume": [
+		"5"
+	],
 	"filament_retract_before_wipe": [
 		"nil"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_cope.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_cope.json
@@ -41,6 +41,9 @@
 	"filament_max_volumetric_speed": [
 		"16"
 	],
+	"filament_multitool_ramming_flow": [
+		"16"
+	],
 	"filament_scarf_seam_type": [
 		"none"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json
@@ -8,6 +8,9 @@
 	"filament_type": [
 		"EVA"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
 	"supertack_plate_temp": [
 		"0"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json
@@ -41,6 +41,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_type": [
 		"HIPS"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json
@@ -44,6 +44,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
 	"filament_type": [
 		"PA"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_paht.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_paht.json
@@ -7,6 +7,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
 	"filament_type": [
 		"PAHT"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json
@@ -86,6 +86,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"16"
+	],
 	"filament_flow_ratio": [
 		"0.94"
 	]
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json
@@ -26,6 +26,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
 	"filament_type": [
 		"PCTG"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json
@@ -38,6 +38,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
 	"filament_type": [
 		"PE"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json
@@ -26,6 +26,9 @@
 	"filament_max_volumetric_speed": [
 		"10"
 	],
+	"filament_multitool_ramming_flow": [
+		"15"
+	],
 	"filament_type": [
 		"PETG"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json
@@ -38,6 +38,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_type": [
 		"PHA"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json
@@ -38,6 +38,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"20"
+	],
 	"filament_scarf_seam_type": [
 		"none"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json
@@ -9,6 +9,9 @@
 	"filament_flow_ratio": [
 		"0.98"
 	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
 	"slow_down_layer_time": [
 		"8"
 	]
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json
@@ -38,6 +38,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
 	"filament_type": [
 		"PP"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json
@@ -47,6 +47,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_type": [
 		"PPA-CF"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json
@@ -43,6 +43,9 @@
 	"filament_max_volumetric_speed": [
 		"4"
 	],
+	"filament_multitool_ramming_flow": [
+		"4"
+	],
 	"filament_type": [
 		"PPS"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json
@@ -40,6 +40,15 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
+	"filament_multitool_ramming_volume": [
+		"0.1"
+	],
 	"filament_soluble": [
 		"1"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json
@@ -11,6 +11,9 @@
 	"filament_max_volumetric_speed": [
 		"12"
 	],
+	"filament_multitool_ramming_flow": [
+		"12"
+	],
 	"filament_type": [
 		"SBS"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json
+++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json
@@ -43,6 +43,15 @@
 	"filament_max_volumetric_speed": [
 		"3.2"
 	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"3.2"
+	],
+	"filament_multitool_ramming_volume": [
+		"0.1"
+	],
 	"filament_retraction_length": [
 		"0.4"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN
+++ b/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN
@@ -17,6 +17,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_vendor": [
 		"eSUN"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN
+++ b/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN
@@ -17,6 +17,9 @@
 	"filament_max_volumetric_speed": [
 		"8"
 	],
+	"filament_multitool_ramming_flow": [
+		"8"
+	],
 	"filament_vendor": [
 		"eSUN"
 	],
--- a/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN
+++ b/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN
@@ -21,6 +21,9 @@
 	"filament_max_volumetric_speed": [
 		"6"
 	],
+	"filament_multitool_ramming_flow": [
+		"6"
+	],
 	"filament_vendor": [
 		"eSUN"
 	],
--- a/resources/profiles/Snapmaker.json
+++ b/resources/profiles/Snapmaker.json
@@ -1,6 +1,6 @@
 {
 	"name": "Snapmaker",
-	"version": "02.04.00.07",
+	"version": "02.04.00.08",
 	"force_update": "0",
 	"description": "Snapmaker configurations",
 	"machine_model_list": [
@@ -426,10 +426,6 @@
 			"name": "0.16 Optimal @Snapmaker U1 (0.4 nozzle)",
 			"sub_path": "process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json"
 		},
-		{
-			"name": "0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle)",
-			"sub_path": "process/0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle).json"
-		},
 		{
 			"name": "0.20 Quality @Snapmaker U1 (0.4 nozzle)",
 			"sub_path": "process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json"
@@ -486,6 +482,66 @@
 			"name": "fdm_process_U1_0.8_common",
 			"sub_path": "process/fdm_process_U1_0.8_common.json"
 		},
+		{
+			"name": "fdm_process_U1_0.06_nozzle_0.2",
+			"sub_path": "process/fdm_process_U1_0.06_nozzle_0.2.json"
+		},
+		{
+			"name": "fdm_process_U1_0.08_nozzle_0.2",
+			"sub_path": "process/fdm_process_U1_0.08_nozzle_0.2.json"
+		},
+		{
+			"name": "fdm_process_U1_0.10_nozzle_0.2",
+			"sub_path": "process/fdm_process_U1_0.10_nozzle_0.2.json"
+		},
+		{
+			"name": "fdm_process_U1_0.12_nozzle_0.2",
+			"sub_path": "process/fdm_process_U1_0.12_nozzle_0.2.json"
+		},
+		{
+			"name": "fdm_process_U1_0.14_nozzle_0.2",
+			"sub_path": "process/fdm_process_U1_0.14_nozzle_0.2.json"
+		},
+		{
+			"name": "fdm_process_U1_0.18_nozzle_0.6",
+			"sub_path": "process/fdm_process_U1_0.18_nozzle_0.6.json"
+		},
+		{
+			"name": "fdm_process_U1_0.24_nozzle_0.6",
+			"sub_path": "process/fdm_process_U1_0.24_nozzle_0.6.json"
+		},
+		{
+			"name": "fdm_process_U1_0.24_nozzle_0.8",
+			"sub_path": "process/fdm_process_U1_0.24_nozzle_0.8.json"
+		},
+		{
+			"name": "fdm_process_U1_0.30_nozzle_0.6",
+			"sub_path": "process/fdm_process_U1_0.30_nozzle_0.6.json"
+		},
+		{
+			"name": "fdm_process_U1_0.32_nozzle_0.8",
+			"sub_path": "process/fdm_process_U1_0.32_nozzle_0.8.json"
+		},
+		{
+			"name": "fdm_process_U1_0.36_nozzle_0.6",
+			"sub_path": "process/fdm_process_U1_0.36_nozzle_0.6.json"
+		},
+		{
+			"name": "fdm_process_U1_0.40_nozzle_0.8",
+			"sub_path": "process/fdm_process_U1_0.40_nozzle_0.8.json"
+		},
+		{
+			"name": "fdm_process_U1_0.42_nozzle_0.6",
+			"sub_path": "process/fdm_process_U1_0.42_nozzle_0.6.json"
+		},
+		{
+			"name": "fdm_process_U1_0.48_nozzle_0.8",
+			"sub_path": "process/fdm_process_U1_0.48_nozzle_0.8.json"
+		},
+		{
+			"name": "fdm_process_U1_0.56_nozzle_0.8",
+			"sub_path": "process/fdm_process_U1_0.56_nozzle_0.8.json"
+		},
 		{
 			"name": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)",
 			"sub_path": "process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json"
@@ -1508,10 +1564,6 @@
 			"name": "Snapmaker PLA Metal @U1",
 			"sub_path": "filament/Snapmaker PLA Metal @U1.json"
 		},
-		{
-			"name": "Snapmaker PLA Silk @U1",
-			"sub_path": "filament/Snapmaker PLA Silk @U1.json"
-		},
 		{
 			"name": "Snapmaker PLA Silk",
 			"sub_path": "filament/Snapmaker PLA Silk.json"
@@ -1671,6 +1723,214 @@
 		{
 			"name": "Snapmaker PLA Matte @U1 base",
 			"sub_path": "filament/Snapmaker PLA Matte @U1 base.json"
+		},
+		{
+			"name": "Polymaker PLA @U1 base",
+			"sub_path": "filament/Polymaker PLA @U1 base.json"
+		},
+		{
+			"name": "Polymaker Silk PLA Family @U1",
+			"sub_path": "filament/Polymaker Silk PLA Family @U1.json"
+		},
+		{
+			"name": "Polymaker Tough PLA Family @U1",
+			"sub_path": "filament/Polymaker Tough PLA Family @U1.json"
+		},
+		{
+			"name": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG HF @U1 base2",
+			"sub_path": "filament/Snapmaker PETG HF @U1 base2.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 base",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 base.json"
+		},
+		{
+			"name": "Snapmaker PLA Basic @U1 base",
+			"sub_path": "filament/Snapmaker PLA Basic @U1 base.json"
+		},
+		{
+			"name": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Glow @U1 base",
+			"sub_path": "filament/Snapmaker PLA Glow @U1 base.json"
+		},
+		{
+			"name": "Snapmaker PLA Matte @U1 base2",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 base2.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker PLA Silk @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PLA Silk @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PLA Silk @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 base2",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 base2.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 base",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 base.json"
+		},
+		{
+			"name": "Snapmaker PLA Wood @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PLA Wood @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Wood @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PLA Wood @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Wood @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PLA Wood @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA-CF @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PLA-CF @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA-CF @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PLA-CF @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA-CF @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PLA-CF @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PVA @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PVA @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PVA @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PVA @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 90A @U1",
+			"sub_path": "filament/Snapmaker TPU 90A @U1.json"
+		},
+		{
+			"name": "Snapmaker TPU 90A @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker TPU 90A @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 90A @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker TPU 90A @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 95A HF @U1",
+			"sub_path": "filament/Snapmaker TPU 95A HF @U1.json"
+		},
+		{
+			"name": "Snapmaker TPU 95A HF @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 95A HF @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1",
+			"sub_path": "filament/Snapmaker PLA Silk @U1.json"
+		},
+		{
+			"name": "Polymaker General PLA Family @U1",
+			"sub_path": "filament/Polymaker General PLA Family @U1.json"
+		},
+		{
+			"name": "Snapmaker PETG HF @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG HF @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG HF @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Basic @U1",
+			"sub_path": "filament/Snapmaker PLA Basic @U1.json"
+		},
+		{
+			"name": "Snapmaker PLA Glow @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PLA Glow @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Matte @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Matte @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Matte @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.2 nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.6 nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.8 nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json"
 		}
 	],
 	"machine_list": [
--- a/resources/profiles/Snapmaker/filament/Polymaker
+++ b/resources/profiles/Snapmaker/filament/Polymaker
@@ -0,0 +1,32 @@
+{
+	"type": "filament",
+	"name": "Polymaker General PLA Family @U1",
+	"inherits": "Polymaker PLA @U1 base",
+	"from": "system",
+	"setting_id": "thXfSaUkOAKJ50ey",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"15"
+	],
+	"filament_vendor": [
+		"Polymaker"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"temperature_vitrification": [
+		"62"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}
--- a/resources/profiles/Snapmaker/filament/Polymaker
+++ b/resources/profiles/Snapmaker/filament/Polymaker
@@ -0,0 +1,107 @@
+{
+	"type": "filament",
+	"name": "Polymaker PLA @U1 base",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"filament_id": "OGFL99",
+	"instantiation": "false",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"chamber_temperatures": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_scarf_seam_type": [
+		"none"
+	],
+	"filament_scarf_height": [
+		"10%"
+	],
+	"filament_scarf_gap": [
+		"15%"
+	],
+	"filament_scarf_length": [
+		"10"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"supertack_plate_temp": [
+		"45"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"45"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"45"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_start_gcode": [
+		"; Filament gcode\n"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	]
+}
--- a/resources/profiles/Snapmaker/filament/Polymaker
+++ b/resources/profiles/Snapmaker/filament/Polymaker
@@ -0,0 +1,32 @@
+{
+	"type": "filament",
+	"name": "Polymaker Silk PLA Family @U1",
+	"inherits": "Polymaker PLA @U1 base",
+	"from": "system",
+	"setting_id": "h8vIYpXbxFtHPV6e",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_density": [
+		"1.34"
+	],
+	"filament_vendor": [
+		"Polymaker"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}
--- a/resources/profiles/Snapmaker/filament/Polymaker
+++ b/resources/profiles/Snapmaker/filament/Polymaker
@@ -0,0 +1,32 @@
+{
+	"type": "filament",
+	"name": "Polymaker Tough PLA Family @U1",
+	"inherits": "Polymaker PLA @U1 base",
+	"from": "system",
+	"setting_id": "d6CC81Es2hp46bto",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_vendor": [
+		"Polymaker"
+	],
+	"slow_down_layer_time": [
+		"6"
+	],
+	"temperature_vitrification": [
+		"55"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon
@@ -11,7 +11,6 @@
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
 	],
-
 	"pressure_advance": [
 		"0.05"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon
@@ -17,7 +17,6 @@
 	"filament_z_hop": [
 		"0.0"
 	],
-
 	"enable_pressure_advance": [
 		"1"
 	],
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon
@@ -17,7 +17,6 @@
 	"filament_z_hop": [
 		"0.0"
 	],
-
 	"enable_pressure_advance": [
 		"1"
 	],
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon
@@ -17,7 +17,6 @@
 	"supertack_plate_temp_initial_layer": [
 		"70"
 	],
-
 	"pressure_advance": [
 		"0.04"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyLite Dual PLA @0.2 nozzle",
-	"setting_id": "jhmy4YHi9MuL0DWu",
 	"inherits": "PolyLite PLA @0.2 nozzle",
+	"from": "system",
+	"setting_id": "jhmy4YHi9MuL0DWu",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker A250 Dual (0.2 nozzle)",
 		"Snapmaker A250 Dual BKit (0.2 nozzle)",
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyLite J1 PLA @0.2 nozzle",
-	"setting_id": "jFlRSxx0KvN3BOUu",
 	"inherits": "PolyLite PLA @0.2 nozzle",
+	"from": "system",
+	"setting_id": "jFlRSxx0KvN3BOUu",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker J1 (0.2 nozzle)"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyLite J1 PLA",
-	"setting_id": "wcpOTTMyZNPFKyXr",
 	"inherits": "PolyLite PLA @base",
+	"from": "system",
+	"setting_id": "wcpOTTMyZNPFKyXr",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker J1 (0.4 nozzle)",
 		"Snapmaker J1 (0.6 nozzle)",
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
@@ -1,4 +1,9 @@
 {
+	"type": "filament",
+	"name": "PolyLite PETG @Base",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"instantiation": "false",
 	"filament_density": [
 		"1.25"
 	],
@@ -18,11 +23,6 @@
 		"0"
 	],
 	"description": "",
-	"inherits": "fdm_filament_petg",
-	"name": "PolyLite PETG @Base",
-	"type": "filament",
-	"instantiation": "false",
-	"from": "system",
 	"filament_vendor": [
 		"Polymaker"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
@@ -17,7 +17,6 @@
 	"supertack_plate_temp_initial_layer": [
 		"70"
 	],
-
 	"pressure_advance": [
 		"0.05"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
@@ -17,7 +17,6 @@
 	"supertack_plate_temp_initial_layer": [
 		"70"
 	],
-
 	"pressure_advance": [
 		"0.05"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyLite PLA @0.2 nozzle",
-	"setting_id": "s9mdMaFca8SHfji9",
 	"inherits": "PolyLite PLA @base",
+	"from": "system",
+	"setting_id": "s9mdMaFca8SHfji9",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker A250 (0.2 nozzle)",
 		"Snapmaker A250 BKit (0.2 nozzle)",
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite
@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "PolyLite PLA @base",
-	"filament_id": "1393866034",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"filament_id": "1393866034",
+	"instantiation": "false",
 	"filament_flow_ratio": [
 		"0.95"
 	],
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra
@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyTerra Dual PLA @0.2 nozzle",
-	"setting_id": "UQYgjH1uVxf3d2Nv",
 	"inherits": "PolyTerra PLA @0.2 nozzle",
+	"from": "system",
+	"setting_id": "UQYgjH1uVxf3d2Nv",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker A250 Dual (0.2 nozzle)",
 		"Snapmaker A250 Dual BKit (0.2 nozzle)",
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra
@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyTerra J1 PLA @0.2 nozzle",
-	"setting_id": "mxKHxGmBZzPLS82O",
 	"inherits": "PolyTerra PLA @0.2 nozzle",
+	"from": "system",
+	"setting_id": "mxKHxGmBZzPLS82O",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker J1 (0.2 nozzle)"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra
@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyTerra J1 PLA",
-	"setting_id": "4MZWZX7QPBzxdEGj",
 	"inherits": "PolyTerra PLA @base",
+	"from": "system",
+	"setting_id": "4MZWZX7QPBzxdEGj",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker J1 (0.4 nozzle)",
 		"Snapmaker J1 (0.6 nozzle)",
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra
@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyTerra PLA @0.2 nozzle",
-	"setting_id": "6W1ygT08NordBdIW",
 	"inherits": "PolyTerra PLA @base",
+	"from": "system",
+	"setting_id": "6W1ygT08NordBdIW",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker A250 (0.2 nozzle)",
 		"Snapmaker A250 BKit (0.2 nozzle)",
--- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker
@@ -1,4 +1,9 @@
 {
+	"type": "filament",
+	"name": "Polymaker HT-PLA @Base",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"instantiation": "false",
 	"filament_density": [
 		"1.28"
 	],
@@ -18,11 +23,6 @@
 		"0"
 	],
 	"description": "",
-	"inherits": "fdm_filament_pla",
-	"name": "Polymaker HT-PLA @Base",
-	"type": "filament",
-	"instantiation": "false",
-	"from": "system",
 	"filament_vendor": [
 		"Polymaker"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker
@@ -1,4 +1,9 @@
 {
+	"type": "filament",
+	"name": "Polymaker HT-PLA-GF @Base",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"instantiation": "false",
 	"filament_density": [
 		"1.34"
 	],
@@ -18,11 +23,6 @@
 		"0"
 	],
 	"description": "",
-	"inherits": "fdm_filament_pla",
-	"name": "Polymaker HT-PLA-GF @Base",
-	"type": "filament",
-	"instantiation": "false",
-	"from": "system",
 	"filament_vendor": [
 		"Polymaker"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker
@@ -1,4 +1,9 @@
 {
+	"type": "filament",
+	"name": "Polymaker PETG @Base",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"instantiation": "false",
 	"filament_density": [
 		"1.3"
 	],
@@ -18,11 +23,6 @@
 		"0"
 	],
 	"description": "",
-	"inherits": "fdm_filament_petg",
-	"name": "Polymaker PETG @Base",
-	"type": "filament",
-	"instantiation": "false",
-	"from": "system",
 	"filament_vendor": [
 		"Polymaker"
 	]
--- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker
@@ -1,4 +1,9 @@
 {
+	"type": "filament",
+	"name": "Polymaker PLA Pro @Base",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"instantiation": "false",
 	"filament_density": [
 		"1.23"
 	],
@@ -18,11 +23,6 @@
 		"0"
 	],
 	"description": "",
-	"inherits": "fdm_filament_pla",
-	"name": "Polymaker PLA Pro @Base",
-	"type": "filament",
-	"instantiation": "false",
-	"from": "system",
 	"filament_vendor": [
 		"Polymaker"
 	]
--- a/resources/profiles/Snapmaker/filament/Snapmaker
+++ b/resources/profiles/Snapmaker/filament/Snapmaker
@@ -7,5 +7,8 @@
 	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_retract_length_toolchange": [
+		"5"
 	]
 }
--- a/resources/profiles/Snapmaker/filament/Snapmaker
+++ b/resources/profiles/Snapmaker/filament/Snapmaker
@@ -7,5 +7,8 @@
 	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
+	],
+	"filament_retract_length_toolchange": [
+		"5"
 	]
 }
--- a/resources/profiles/Snapmaker/filament/Snapmaker
+++ b/resources/profiles/Snapmaker/filament/Snapmaker
@@ -0,0 +1,104 @@
+{
+	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle",
+	"inherits": "Snapmaker Breakaway Support @base",
+	"from": "system",
+	"setting_id": "mJoaud6wulT4p8SA",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 nozzle)"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_cost": [
+		"69.98"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"0.5"
+	],
+	"filament_retract_length_toolchange": [
+		"10"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"pressure_advance": [
+		"0.2"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"5"
+	],
+	"filament_multitool_ramming_volume": [
+		"5"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	]
+}
--- a/resources/profiles/Snapmaker/filament/Snapmaker
+++ b/resources/profiles/Snapmaker/filament/Snapmaker
@@ -0,0 +1,104 @@
+{
+	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle",
+	"inherits": "Snapmaker Breakaway Support @base",
+	"from": "system",
+	"setting_id": "rKUUREJNhstIU0I2",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"filament_cost": [
+		"69.98"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_retract_length_toolchange": [
+		"10"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"20"
+	],
+	"filament_multitool_ramming_volume": [
+		"5"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	]
+}
--- a/resources/profiles/Snapmaker/filament/Snapmaker
+++ b/resources/profiles/Snapmaker/filament/Snapmaker
@@ -0,0 +1,98 @@
+{
+	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle",
+	"inherits": "Snapmaker Breakaway Support @base",
+	"from": "system",
+	"setting_id": "hQ8jQ5GKQKGKuPew",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"filament_cost": [
+		"69.98"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_flow_ratio": [
+		"0.93"
+	],
+	"filament_retract_length_toolchange": [
+		"10"
+	],
+	"filament_retraction_length": [
+		"3"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"pressure_advance": [
+		"0.015"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"20"
+	],
+	"filament_multitool_ramming_volume": [
+		"5"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"textured_plate_temp": [
+		"65"
+	]
+}
--- a/resources/profiles/Snapmaker/filament/Snapmaker
+++ b/resources/profiles/Snapmaker/filament/Snapmaker
@@ -10,5 +10,83 @@
 	],
 	"filament_type": [
 		"PLA"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"70"
+	],
+	"during_print_exhaust_fan_speed": [
+		"70"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"20"
+	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"20"
+	],
+	"filament_multitool_ramming_volume": [
+		"5"
+	],
+	"filament_retract_length_toolchange": [
+		"5"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
 	]
 }
--- a/resources/profiles/Snapmaker/filament/Snapmaker
+++ b/resources/profiles/Snapmaker/filament/Snapmaker
@@ -0,0 +1,108 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG HF @U1 0.2 nozzle",
+	"inherits": "Snapmaker PETG HF @U1 base2",
+	"from": "system",
+	"setting_id": "Ujul2YTBwfldFiFd",
+	"instantiation": "true",
+	"filament_max_volumetric_speed": [
+		"1",
+		"1"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"long_retractions_when_ec": [
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"0",
+		"0"
+	],
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"eng_plate_temp": [
+		"80"
+	],
+	"eng_plate_temp_initial_layer": [
+		"80"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_end_gcode": [
+		"\n\n"
+	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"3"
+	],
+	"filament_multitool_ramming_volume": [
+		"5"
+	],
+	"filament_retract_length_toolchange": [
+		"5"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_start_gcode": [
+		""
+	],
+	"filament_vendor": [
+		"Snapmaker"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"245"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"60"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	]
+}
--- a/resources/profiles/Snapmaker/filament/Snapmaker
+++ b/resources/profiles/Snapmaker/filament/Snapmaker
@@ -0,0 +1,113 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG HF @U1 0.6 nozzle",
+	"inherits": "Snapmaker PETG HF @U1 base2",
+	"from": "system",
+	"setting_id": "2FfQZdp5xunngnF0",
+	"instantiation": "true",
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"long_retractions_when_ec": [
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"0",
+		"0"
+	],
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"eng_plate_temp": [
+		"80"
+	],
+	"eng_plate_temp_initial_layer": [
+		"80"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_end_gcode": [
+		"\n"
+	],
+	"filament_max_volumetric_speed": [
+		"20"
+	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"20"
+	],
+	"filament_multitool_ramming_volume": [
+		"5"
+	],
+	"filament_retract_length_toolchange": [
+		"5"
+	],
+	"filament_retraction_length": [
+		"2.5"
+	],
+	"filament_start_gcode": [
+		""
+	],
+	"filament_vendor": [
+		"Snapmaker"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"245"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"60"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	]
+}
--- a/resources/profiles/Snapmaker/filament/Snapmaker
+++ b/resources/profiles/Snapmaker/filament/Snapmaker
@@ -0,0 +1,110 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG HF @U1 0.8 nozzle",
+	"inherits": "Snapmaker PETG HF @U1 base2",
+	"from": "system",
+	"setting_id": "ebANa67V4B2nwUaX",
+	"instantiation": "true",
+	"filament_ramming_travel_time": [
+		"0",
+		"0"
+	],
+	"long_retractions_when_ec": [
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"0",
+		"0"
+	],
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"eng_plate_temp": [
+		"80"
+	],
+	"eng_plate_temp_initial_layer": [
+		"80"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_max_volumetric_speed": [
+		"20"
+	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"20"
+	],
+	"filament_multitool_ramming_volume": [
+		"5"
+	],
+	"filament_retract_length_toolchange": [
+		"5"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_start_gcode": [
+		""
+	],
+	"filament_vendor": [
+		"Snapmaker"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"hot_plate_temp": [
+		"80"
+	],
+	"hot_plate_temp_initial_layer": [
+		"80"
+	],
+	"nozzle_temperature": [
+		"245"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"60"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"80"
+	],
+	"textured_plate_temp_initial_layer": [
+		"80"
+	]
+}
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Ian Chua	274150af27	Merge branch 'main' into feat/plugin-storage-api	2026-08-05 20:11:29 +08:00
SoftFever	a10d9e77cf	Make the wipe tower's planner flush and dwell work on Klipper (#15133 ) # Description On Klipper the wipe tower's motion-queue synchronization silently did nothing. Klipper acts on commands the moment it parses them, and its `G4` reads only `P` in milliseconds — it ignores `S` — so the `G4 S0` the tower used to flush the queue before a temperature change never synchronized anything, and the cooling delay after a filament's cooling moves passed instantly instead of waiting. The tower now emits `M400` for the flush and `G4 P<ms>` for the dwell when the flavor is Klipper. Only `gcode_flavor = klipper` is affected; G-code for every other flavor is byte-identical, so no shipped profile or existing project file changes. # Screenshots/Recordings/Graphs <!-- > Please attach relevant screenshots to showcase the UI changes. > Please attach images that can help explain the changes. --> ## Tests <!-- > Please describe the tests that you have conducted to verify the changes made in this PR. --> <!-- > A guide for users on how to download the artifacts from this PR. --> [How to Download Pull Requests Artifacts for Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)	2026-08-05 18:21:05 +08:00
SoftFever	1d023216f2	clean up	2026-08-05 18:09:36 +08:00
SoftFever	dc2796209f	feat: printer agent UI (#15111 ) # Description Changes the device tab to render native wxWidgets UI and route the UI via printer agents. When the flag introduced in #15110 is enabled, the tab bar will show both the native wxWidgets device tab and webview tab under the name device (legacy) This is a prerequisite for implementing the printer agent workflow. <img width="3377" height="1378" alt="image" src="https://github.com/user-attachments/assets/d72b646b-e6c6-4e10-b5d4-fc989debfca8" /> <img width="3377" height="1378" alt="image" src="https://github.com/user-attachments/assets/2356c0f8-bffe-4cd5-bf4d-31f4b5c7706e" /> <!-- > A guide for users on how to download the artifacts from this PR. --> [How to Download Pull Requests Artifacts for Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)	2026-08-05 17:25:23 +08:00
SoftFever	194ef34080	Wait in the wipe tower with a millisecond dwell on Klipper The wipe tower's "Delay after unloading" never happened on Klipper. It was emitted as G4 S<seconds>, and Klipper's G4 reads only the P parameter, in milliseconds, so the pause was silently skipped. The option now produces a dwell Klipper actually performs. Also corrects the planner flush rationale, which cited an extruder position reset that Klipper resolves at parse time and does not need synchronized, and adds end-to-end coverage that slices a two-filament print and checks the emitted wipe tower G-code on both a Klipper and a non-Klipper flavor. No change to any other firmware flavor's output, and no shipped profile sets a non-zero delay, so no shipped profile's output moves either.	2026-08-05 17:15:35 +08:00
SoftFever	4e1caa39eb	Flush the wipe tower planner queue with M400 on Klipper The wipe tower emitted G4 S0 to make the firmware finish its queued moves before commands that must not take effect early. Klipper's G4 reads only the P parameter, so that flush never happened there and a temperature change could land seconds ahead of the moves it was meant to follow. Klipper now gets M400 instead, through one helper shared by both wipe tower implementations. No change to any other firmware flavor's output, so no shipped profile or saved project is affected.	2026-08-05 17:15:35 +08:00
Ian Chua	38f5c84e7f	fix: regression error	2026-08-05 16:20:58 +08:00
Ian Chua	4d8ce0e8a7	Merge branch 'main' into feat/printer-agent-ui	2026-08-05 13:40:20 +08:00
Ian Chua	38cb1ae8d1	Add developer flag for printer agents (#15110 )	2026-08-05 13:40:05 +08:00
Ian Chua	32f82b64e7	fix: enable both device tabs	2026-08-05 13:07:32 +08:00
Ian Chua	e56d7aeb80	Merge branch 'feat/printer-agent-ui' of https://github.com/OrcaSlicer/OrcaSlicer into feat/printer-agent-ui	2026-08-05 13:07:08 +08:00
Ian Chua	4758dc6c68	Merge branch 'main' into feat/printer-agent-ui	2026-08-05 13:06:47 +08:00
Ian Chua	596cbb8b2d	Keep printer-agent error codes available to UI workflow	2026-08-05 11:39:37 +08:00
SoftFever	6312caaf13	Add filament_retract_length_toolchange/filament_retract_restart_extra_toolchange config and update tool changer printer's profiles (#15039 ) * update snapmaker profiles. largely ported for Snapmaker Orca fork * update prime volume * set precise_outer_wall to 1 * Update per-material multi-tool ramming to the filament library * Add per-filament overrides for toolchange retraction * Set toolchange retraction per filament for Snapmaker U1 * set default support type to tree * format snapmaker profiles	2026-08-05 00:13:27 +08:00
SoftFever	0051768206	Smooth out the spiral lift when arc fitting is disabled (#15118 ) The linear approximation used a heuristic segment count clamped to 4..16, so the lift ran as a coarse polygon. Every vertex is a direction change large enough to hit the firmware's jerk limit, forcing a decelerate/accelerate at each corner — the lift micro-stutters instead of running at speed. The segment count now comes from the chord deviation against the slicing resolution, reusing Geometry::ArcWelder::arc_discretization_steps, which keeps the turn at each vertex shallow enough for the firmware to carry speed through the whole move. Points are emitted through GCodeG1Formatter so they carry the same quantization as the rest of the G-code, and the move comment now trails the feedrate line to match _travel_to_z and the G2/G3 branch. No change when arc fitting is enabled.	2026-08-05 00:09:46 +08:00
Ian Bassi	1d078e005a	Mouse ear Wiki redirect (#15115 ) Based in https://github.com/OrcaSlicer/OrcaSlicer/pull/15015 and https://github.com/OrcaSlicer/OrcaSlicer_WIKI/pull/323	2026-08-04 11:37:05 -03:00
Kris Austin	82759d3899	fix: make the error dialog caret point at the character it's blaming (#14886 ) * fix: make the error dialog caret point at the character it's blaming Custom G-code parse errors print the offending line with a '^' under the character that broke, positioned with spaces so it only lines up in a fixed-width font. Since v2.3.2 these dialogs rendered entirely in the proportional UI font, so the caret drifted left of its column and landed on unrelated text. Render only the code excerpts (the offending source line and its caret) in the fixed-width face, leaving the surrounding prose in the UI font, and reserve the horizontal scrollbar's height so a long line does not clip. Rename the flag to has_code_excerpts to match what it now means. Fixes #14869 * refactor(GUI): use <code> instead of <tt> for error excerpts wxHTML maps <tt>, <code>, <kbd> and <samp> to the same fixed-width handler, so this renders identically. <code> is the non-deprecated tag and matches what the original code used. * fix(GUI): align the error caret with real spaces, not   The caret line was padded with   so its spaces would survive inline HTML. wxHTML measures every glyph by its font extent, so where the fixed font lacks a U+00A0 glyph the fallback renders it about twice as wide, and the all-  caret line outran the source, drifting the ^ to the right. Wrap the excerpts in a small <excerpt> tag, registered on the dialog's own parser, that switches on wxHTML literal-whitespace mode so the caret uses real spaces that match the source column in any font. It sits inside <code> for the fixed face; <pre> would do both but forces a blank line above it. --------- Co-authored-by: Noisyfox <timemanager.rick@gmail.com>	2026-08-04 22:01:45 +08:00
Ian Bassi	59155f26ac	Build Arch Fix (#15107 ) Arch Fix	2026-08-04 21:56:15 +08:00
Ian Chua	79dcace1ac	Add unsupported-command feedback to the device UI	2026-08-04 21:26:50 +08:00
Andrew	8dfc7a14b9	Gate agent mode behind use_printer_agents toggle Replace per-printer auto-activation (is_current_printer_agent_plugin) with a global experimental AppConfig toggle, default off: legacy print-host behavior is unchanged until the user opts in. The toggle drives device-tab routing, print button defaults, connect-button visibility and sidebar layout, and dedups machine-select dialog opens.	2026-08-04 18:12:11 +08:00
Andrew	1534268183	Reset device selection on agent swap or unload (#124 ) set_live_printer_agent centralizes the swap: deselect the machine, clear stale sidebar state and the previous agent's Other Devices, then install the new agent (or null when its provider vanished). Plugin load/unload callbacks refresh the dropdown and re-run agent selection. load_last_machine no longer falls back to the first available machine.	2026-08-04 18:12:11 +08:00
Andrew	501af81ba9	Replace fake-enum printer agent dropdown (#121 ) A dedicated PrinterAgentChoice field reads rows straight from the live agent registry and stores the agent id string, replacing the fake-coEnum index mapping. The field moves to TabPrinter and registers with the searcher so UnsavedChanges renders it; the PhysicalPrinterDialog copy and its update hook are removed (#125). switch_printer_agent now resolves ids via resolve_printer_agent_id.	2026-08-04 18:12:10 +08:00
Ian Chua	16c44940d2	Add developer flag for printer agents	2026-08-04 18:12:10 +08:00
yw4z	40eab797c6	match em_unit value for on_dpi_change for linux (#15043 ) * Update GUI_Utils.hpp * Update GUI_Utils.hpp	2026-08-04 08:45:31 +08:00
Kiss Lorand	ca7fbfb007	Fix missing overhang wall when no partial counterbore bridge is generated (#15100 )	2026-08-03 18:02:48 -03:00
Mikhail f. Shiryaev	7b404596e9	Add `Skip G-code config block` to exclude the config comments from G-code files (#12455 ) Add feature to skip CONFIG_BLOCK in G-code files	2026-08-03 15:10:01 -03:00
Kris Austin	06ef58bad8	test: replace the disabled convex_hull_2d test (#14892 ) test(libslic3r): replace the disabled convex_hull_2d test, closing #11269 The last "failing libslic3r test" from #11269 was the disabled SCENARIO("2D convex hull of sinking object", "[3mf][.]") in test_3mf.cpp. It checked ModelObject::convex_hull_2d for a sinking object against PrusaSlicer's reference hull, but Orca's convex_hull_2d does not clip geometry below the bed the way PrusaSlicer's its_convex_hull_2d_above does, so the reference never matched. The test also wrote a debug mesh to a hardcoded /tmp path and its comparison loop was inverted. Remove it and add tests/libslic3r/test_model.cpp characterizing convex_hull_2d on non-sinking transforms (identity and scale+offset), where the projected footprint is unambiguous. Homed in a Model test file since it exercises ModelObject, not 3MF.	2026-08-03 22:29:00 +08:00
SoftFever	74c4a7e450	Support printer specific filament profiles in the OrcaFilamentLibrary (#15101 ) * Support printer specific filament profiles in the Orca Filament Library	2026-08-03 22:25:50 +08:00
Noisyfox	dbb991bf07	Fix gizmo being closed after releasing mouse outside the gizmo floating window (#15095 ) * Fix gizmo being closed after releasing mouse outside the gizmo floating window The left up event of a drag started on the gizmo floating window (e.g. selecting text in an input field) and released over the bed was treated as a click on the plate, which deselected the objects and closed the active gizmo. Add the ignore_left_up guard to the plate select branch, matching the deselect branch above. Co-Authored-By: Claude <noreply@anthropic.com> * Fix Emboss gizmo being closed after releasing mouse outside its floating window The Emboss gizmo has its own close-on-click-away handler (on_mouse_change_selection) that was not protected against left up events originating from ImGui windows, so the gizmo was still closed when a drag started on its floating window (e.g. selecting text in the input field) ended over the 3D scene. Expose the canvas's ignore_left_up state to gizmos and skip the close check for such releases. Co-Authored-By: Claude <noreply@anthropic.com> --------- Co-authored-by: Claude <noreply@anthropic.com>	2026-08-03 18:34:15 +08:00
Noisyfox	66d3f3f9c3	imgui: Clamp mouse y-coordinate in multi-line click/drag to text bounds (#15052 ) * imgui: Clamp mouse y-coordinate in multi-line click/drag to text bounds In single-line mode, click and drag already clamped y to the line's y-coordinate so the cursor would continue to follow the x-position when the mouse went off the top or bottom of the text. Multi-line mode did not clamp, so stb_text_locate_coord() would return 0 (above) or n (below), snapping the cursor to the very start or end of text and ignoring the x-coordinate entirely. Now both modes walk the row layout to compute the top of the first row (y_min) and bottom of the last row (y_max, minus half a line height to add tolerance for rounding), then clamp y to that range before passing it to stb_text_locate_coord(). This means dragging or clicking above the text now places the cursor on the first line at the x-coordinate, and dragging/clicking below places it on the last line at the x-coordinate, matching the single-line precedent. * Fix issue that cursor cannot be placed at the last empty line	2026-08-03 18:34:05 +08:00
Ian Chua	2e246341d1	move the storage directory outside the actual plugin code folder	2026-07-24 18:57:46 +08:00
Ian Chua	9513300835	Merge branch 'main' into feat/plugin-storage-api	2026-07-24 13:09:39 +08:00
Ian Chua	f7caf0db07	feat(plugin): storage API	2026-07-23 21:04:08 +08:00