Preventing removal of old networking plugins on app version update as Orca allow user to pin the plugin version

* init

* ix: resolve OFL filament inherits in printer creation via base_bundle

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>

.github/workflows/auto-close-duplicates.yml

@@ -15,7 +15,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
 
       - name: Setup Bun
         uses: oven-sh/setup-bun@v2

.github/workflows/backfill-duplicate-comments.yml

@@ -29,7 +29,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
       
       - name: Setup Bun
         uses: oven-sh/setup-bun@v2

.github/workflows/build_all.yml

@@ -131,7 +131,7 @@ jobs:
     if: ${{ !cancelled() && success() }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
         with:
           sparse-checkout: |
             .github
@@ -204,7 +204,7 @@ jobs:
     - name: "Remove unneeded stuff to free disk space"
       run:
         rm -rf /usr/local/lib/android/* /usr/share/dotnet/* /opt/ghc1/* "/usr/local/share/boost1/*" /opt/hostedtoolcache1/*
-    - uses: actions/checkout@v7
+    - uses: actions/checkout@v6
     - name: Get the version and date
       run: |
         ver_pure=$(grep 'set(SoftFever_VERSION' version.inc | cut -d '"' -f2)
@@ -223,14 +223,14 @@ jobs:
     # Manage flatpak-builder cache externally so PRs restore but never upload
     - name: Restore flatpak-builder cache
       if: github.event_name == 'pull_request'
-      uses: actions/cache/restore@v6
+      uses: actions/cache/restore@v5
       with:
         path: .flatpak-builder
         key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.event.pull_request.base.sha }}
         restore-keys: flatpak-builder-${{ matrix.variant.arch }}-
     - name: Save/restore flatpak-builder cache
       if: github.event_name != 'pull_request'
-      uses: actions/cache@v6
+      uses: actions/cache@v5
       with:
         path: .flatpak-builder
         key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.sha }}

.github/workflows/build_check_cache.yml

@@ -26,7 +26,7 @@ jobs:
       valid-cache: ${{ steps.cache_deps.outputs.cache-hit }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
         with:
           lfs: 'false'
         
@@ -46,7 +46,7 @@ jobs:
             
       - name: load cache
         id: cache_deps
-        uses: actions/cache@v6
+        uses: actions/cache@v5
         with:
           path: ${{ steps.set_outputs.outputs.cache-path }}
           key: ${{ steps.set_outputs.outputs.cache-key }}

.github/workflows/build_deps.yml

@@ -34,12 +34,12 @@ jobs:
 
       # Setup the environment
       - name: Checkout
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
         with:
           lfs: 'false'
 
       - name: load cached deps
-        uses: actions/cache@v6
+        uses: actions/cache@v5
         with:
           path: ${{ inputs.cache-path }}
           key: ${{ inputs.cache-key }}

.github/workflows/build_orca.yml

@@ -37,13 +37,13 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
         with:
           lfs: 'false'
 
       - name: load cached deps
         if: ${{ !(runner.os == 'macOS' && inputs.macos-combine-only) }}
-        uses: actions/cache@v6
+        uses: actions/cache@v5
         with:
           path: ${{ inputs.cache-path }}
           key: ${{ inputs.cache-key }}

.github/workflows/check_locale.yml

@@ -14,7 +14,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:  
       - name: Checkout repository
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
 
       - name: Install gettext 
         run: |

.github/workflows/check_profiles.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
 
       - name: Run extra JSON check
         id: extra_json_check
@@ -41,7 +41,7 @@ jobs:
           curl -L -o OrcaSlicer_profile_validator https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/OrcaSlicer_profile_validator_Linux_Ubuntu2404_nightly
           chmod +x ./OrcaSlicer_profile_validator
 
-      # Validate all system profiles.
+      # validate profiles
       - name: validate system profiles
         id: validate_system
         continue-on-error: true
@@ -63,101 +63,11 @@ jobs:
         continue-on-error: true
         working-directory: ${{ github.workspace }}
         run: |
-          fixtures_dir="${{ runner.temp }}/profile-fixtures"
-          output_dir="${{ runner.temp }}/custom-preset-validation"
-          combined_log="${{ runner.temp }}/validate_custom.log"
-          summary="${output_dir}/summary.md"
-          release_url="https://github.com/OrcaSlicer/OrcaSlicer-profile-validator/releases/download/fixture-archive"
-
-          rm -rf "${fixtures_dir}" "${output_dir}"
-          mkdir -p "${fixtures_dir}" "${output_dir}"
-
-          curl -fsSL -o "${fixtures_dir}/manifest.json" "${release_url}/manifest.json"
-
-          MANIFEST_PATH="${fixtures_dir}/manifest.json" python3 <<'PY' > "${fixtures_dir}/fixtures.tsv"
-          import json
-          import os
-
-          with open(os.environ["MANIFEST_PATH"], encoding="utf-8") as fh:
-              manifest = json.load(fh)
-
-          if isinstance(manifest, dict):
-              entries = manifest.get("fixtures", [])
-          else:
-              entries = manifest
-
-          for entry in entries:
-              version = entry.get("version", "")
-              asset = entry.get("asset", "")
-              sha256 = entry.get("asset_sha256", "")
-              if not version or not asset:
-                  continue
-              print(f"{version}\t{asset}\t{sha256}")
-          PY
-
-          if [ ! -s "${fixtures_dir}/fixtures.tsv" ]; then
-            echo "No custom preset fixtures found in ${release_url}/manifest.json" | tee "${combined_log}"
-            exit 1
-          fi
-
-          {
-            echo "## Custom Preset Fixture Validation"
-            echo ""
-            echo "| Version | Status | Log |"
-            echo "| --- | --- | --- |"
-          } > "${summary}"
-
-          status=0
-          failed_logs=()
-
-          while IFS=$'\t' read -r version asset expected_sha256; do
-            fixture_zip="${fixtures_dir}/${asset}"
-            asset_url_name="$(python3 -c 'import sys, urllib.parse; print(urllib.parse.quote(sys.argv[1], safe=""))' "${asset}")"
-            profile_tree="${output_dir}/profiles-${version}"
-            log_path="${output_dir}/${version}.log"
-
-            curl -fsSL -o "${fixture_zip}" "${release_url}/${asset_url_name}"
-
-            if [ -n "${expected_sha256}" ] && [ "${expected_sha256}" != "<sha256>" ]; then
-              echo "${expected_sha256}  ${fixture_zip}" | sha256sum -c -
-            fi
-
-            rm -rf "${profile_tree}"
-            mkdir -p "${profile_tree}"
-            cp -a "${{ github.workspace }}/resources/profiles/." "${profile_tree}/"
-            rm -rf "${profile_tree}/user"
-            unzip -q "${fixture_zip}" -d "${profile_tree}"
-
-            set +e
-            ./OrcaSlicer_profile_validator -p "${profile_tree}" -l 2 > "${log_path}" 2>&1
-            result=$?
-            set -e
-
-            if [ "${result}" -eq 0 ]; then
-              echo "| ${version} | PASS | ${version}.log |" >> "${summary}"
-            else
-              echo "| ${version} | FAIL | ${version}.log |" >> "${summary}"
-              failed_logs+=("${log_path}")
-              status=1
-            fi
-          done < "${fixtures_dir}/fixtures.tsv"
-
-          {
-            cat "${summary}"
-            if [ "${#failed_logs[@]}" -gt 0 ]; then
-              echo ""
-              echo "## Failed Fixture Logs"
-              for log_path in "${failed_logs[@]}"; do
-                echo ""
-                echo "### $(basename "${log_path}" .log)"
-                echo '```'
-                head -c 12000 "${log_path}" || echo "No output captured"
-                echo '```'
-              done
-            fi
-          } | tee "${combined_log}"
-
-          exit "${status}"
+          set +e
+          curl -LJO https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/orca_custom_preset_tests.zip
+          unzip -q ./orca_custom_preset_tests.zip -d ${{ github.workspace }}/resources/profiles
+          ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 2>&1 | tee ${{ runner.temp }}/validate_custom.log
+          exit ${PIPESTATUS[0]}
 
       - name: Prepare PR number for comment workflow
         if: ${{ always() && github.event_name == 'pull_request' }}

.github/workflows/dedupe-issues.yml

@@ -20,7 +20,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
 
       - name: Run Claude Code slash command
         uses: anthropics/claude-code-base-action@beta

.github/workflows/doxygen-docs.yml

@@ -26,7 +26,7 @@ jobs:
           remove-existing-swap-files: true
 
       - name: Checkout repository
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
 
       - name: Install Doxygen and Graphviz
         run: |

.github/workflows/publish_release.yml

@@ -17,7 +17,7 @@ on:
         required: true
         type: string
       tag:
-        description: 'Tag of the draft release to upload to (e.g. v2.4.0-beta)'
+        description: 'Tag of the draft release to upload to (e.g. v2.4.0)'
         required: true
         type: string
 

.github/workflows/shellcheck.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       - name: Cache shellcheck download
         id: cache-shellcheck-v0_11
-        uses: actions/cache@v6
+        uses: actions/cache@v5
         with:
           path: ~/shellcheck
           key: ${{ runner.os }}-shellcheck-v0_11
@@ -36,7 +36,7 @@ jobs:
           tar -xvf ~/sc.tar.xz -C ~
           mv ~/shellcheck-"${INPUT_VERSION}"/shellcheck ~/shellcheck
 
-      - uses: actions/checkout@v7
+      - uses: actions/checkout@v6
         with:
           fetch-depth: 1
 

.github/workflows/update-translation.yml

@@ -10,7 +10,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:  
       - name: Checkout repository
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6

deps/Boost/Boost.cmake

@@ -25,7 +25,6 @@ if (MSVC AND DEP_DEBUG)
 endif ()
 
 orcaslicer_add_cmake_project(Boost
-    ${_options}
     URL "https://github.com/boostorg/boost/releases/download/boost-1.84.0/boost-1.84.0.tar.gz"
     URL_HASH SHA256=4d27e9efed0f6f152dc28db6430b9d3dfb40c0345da7342eaa5a987dde57bd95
     LIST_SEPARATOR |

deps/CMakeLists.txt

@@ -155,25 +155,17 @@ if (NOT _is_multi AND NOT CMAKE_BUILD_TYPE)
 endif ()
 
 function(orcaslicer_add_cmake_project projectname)
-    cmake_parse_arguments(P_ARGS "FORWARD_CONFIG" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND" "CMAKE_ARGS" ${ARGN})
+    cmake_parse_arguments(P_ARGS "" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND" "CMAKE_ARGS" ${ARGN})
 
     set(_configs_line -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE})
     if (_is_multi OR MSVC)
-        if (P_ARGS_FORWARD_CONFIG)
-            set(_configs_line -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE})
-        elseif (ORCA_INCLUDE_DEBUG_INFO AND NOT DEP_DEBUG)
+        if (ORCA_INCLUDE_DEBUG_INFO AND NOT DEP_DEBUG)
             set(_configs_line "-DCMAKE_C_FLAGS_RELEASE:STRING=${CMAKE_C_FLAGS_RELWITHDEBINFO} -DCMAKE_CXX_FLAGS_RELEASE:STRING=${CMAKE_CXX_FLAGS_RELWITHDEBINFO}")
         else ()
             set(_configs_line "")
         endif ()
     endif ()
 
-    if (P_ARGS_FORWARD_CONFIG)
-        set(_target_config "$<CONFIG>")
-    else()
-        set(_target_config "Release")
-    endif()
-
     if (MSVC)
       set(_gen CMAKE_GENERATOR "${DEP_MSVC_GEN}" CMAKE_GENERATOR_PLATFORM "${DEP_PLATFORM}")
     else()
@@ -216,8 +208,8 @@ if (NOT IS_CROSS_COMPILE OR NOT APPLE)
             ${DEP_CMAKE_OPTS}
             ${P_ARGS_CMAKE_ARGS}
        ${P_ARGS_UNPARSED_ARGUMENTS}
-       BUILD_COMMAND ${CMAKE_COMMAND} --build . --config ${_target_config} -- ${_build_j}
-       INSTALL_COMMAND ${CMAKE_COMMAND} --build . --target install --config ${_target_config}
+       BUILD_COMMAND ${CMAKE_COMMAND} --build . --config Release -- ${_build_j}
+       INSTALL_COMMAND ${CMAKE_COMMAND} --build . --target install --config Release
     )
 
     if (FLATPAK)
@@ -259,8 +251,8 @@ else()
             ${DEP_CMAKE_OPTS}
             ${P_ARGS_CMAKE_ARGS}
        ${P_ARGS_UNPARSED_ARGUMENTS}
-       BUILD_COMMAND ${CMAKE_COMMAND} --build . --config ${_target_config} -- ${_build_j}
-       INSTALL_COMMAND ${CMAKE_COMMAND} --build . --target install --config ${_target_config}
+       BUILD_COMMAND ${CMAKE_COMMAND} --build . --config Release -- ${_build_j}
+       INSTALL_COMMAND ${CMAKE_COMMAND} --build . --target install --config Release
     )
 
 endif()

deps/Draco/Draco.cmake

@@ -1,10 +1,4 @@
-set(_options "")
-if (MSVC AND DEP_DEBUG)
-    set(_options "FORWARD_CONFIG")
-endif ()
-
 orcaslicer_add_cmake_project(Draco
-    ${_options}
     URL https://github.com/google/draco/archive/refs/tags/1.5.7.zip
     URL_HASH SHA256=27b72ba2d5ff3d0a9814ad40d4cb88f8dc89a35491c0866d952473f8f9416b77
 )

deps/OpenCV/OpenCV.cmake

@@ -2,12 +2,8 @@
 # leaves ~200 unresolved ippicv* externals at link time on Windows ARM64.
 if (MSVC AND NOT "${DEPS_ARCH}" STREQUAL "arm64")
     set(_use_IPP "-DWITH_IPP=ON")
-    if (DEP_DEBUG)
-        set(_options "FORWARD_CONFIG")
-    endif ()
 else ()
     set(_use_IPP "-DWITH_IPP=OFF")
-    set(_options "")
 endif ()
 
 if (IN_GIT_REPO)
@@ -15,7 +11,6 @@ if (IN_GIT_REPO)
 endif ()
 
 orcaslicer_add_cmake_project(OpenCV
-    ${_options}
     URL https://github.com/opencv/opencv/archive/refs/tags/4.6.0.tar.gz
     URL_HASH SHA256=1ec1cba65f9f20fe5a41fda1586e01c70ea0c9a6d7b67c9e13edf0cfe2239277
     PATCH_COMMAND git apply ${OpenCV_DIRECTORY_FLAG} --verbose --ignore-space-change --whitespace=fix ${CMAKE_CURRENT_LIST_DIR}/0001-vs.patch  ${CMAKE_CURRENT_LIST_DIR}/0002-clang19-macos.patch

deps_src/libnest2d/include/libnest2d/placers/nfpplacer.hpp

@@ -1123,17 +1123,18 @@ private:
 
         std::vector<RawShape> objs,excludes;
         for (const Item &item : items_) {
-            if (item.isFixed())
-                excludes.push_back(item.transformedShape());
-            else
-                objs.push_back(item.transformedShape());
+            if (item.isFixed()) continue;
+            objs.push_back(item.transformedShape());
         }
         if (objs.empty())
             return;
-        // Without fixed items this inner-fit NFP can exceed clipper's range and crash MSVC.
-        if (!excludes.empty())
         { // find a best position inside NFP of fixed items (excluded regions), so the center of pile is cloest to bed center
             RawShape objs_convex_hull = sl::convexHull(objs);
+            for (const Item &item : items_) {
+                if (item.isFixed()) {
+        		    excludes.push_back(item.transformedShape());
+                }
+            }
 
             auto   nfps = calcnfp(objs_convex_hull, excludes, bbin, Lvl<MaxNfpLevel::value>());
             if (nfps.empty()) {

localization/i18n/list.txt

@@ -227,14 +227,11 @@ src/slic3r/GUI/CreatePresetsDialog.cpp
 src/slic3r/GUI/DailyTips.cpp
 src/slic3r/Utils/CalibUtils.cpp
 src/slic3r/GUI/PhysicalPrinterDialog.cpp
-src/slic3r/GUI/CrealityDiscoveryDialog.cpp
-src/slic3r/GUI/TroubleshootDialog.cpp
 src/slic3r/Utils/3DPrinterOS.cpp
 src/slic3r/Utils/AstroBox.cpp
 src/slic3r/Utils/Duet.cpp
 src/slic3r/Utils/FlashAir.cpp
 src/slic3r/Utils/MKS.cpp
-src/slic3r/Utils/Moonraker.cpp
 src/slic3r/Utils/OctoPrint.cpp
 src/slic3r/Utils/Repetier.cpp
 src/slic3r/Utils/ProfileDescription.hpp

resources/data/hints.ini

@@ -146,16 +146,16 @@ text = Fine-tuning for flow rate\nDid you know that flow rate can be fine-tuned
 text = Split your prints into plates\nDid you know that you can split a model that has a lot of parts into individual plates ready to print? This will simplify the process of keeping track of all the parts.
 
 [hint:Speed up your print with Adaptive Layer Height]
-text = Speed up your print with Adaptive Layer Height\nDid you know that you can print a model even faster by using the Adaptive Layer Height option? Check it out!
+text = Speed up your print with Adaptive Layer Height\nDid you know that you can print a model even faster, by using the Adaptive Layer Height option? Check it out!
 
 [hint:Support painting]
 text = Support painting\nDid you know that you can paint the location of your supports? This feature makes it easy to place the support material only on the sections of the model that actually need it.
 
 [hint:Different types of supports]
-text = Different types of supports\nDid you know that you can choose from multiple types of supports? Tree supports work great for organic models while saving filament and improving print speed. Check them out!
+text = Different types of supports\nDid you know that you can choose from multiple types of supports? Tree supports work great for organic models, while saving filament and improving print speed. Check them out!
 
 [hint:Printing Silk Filament]
-text = Printing Silk Filament\nDid you know that Silk filament needs special consideration to print successfully? A higher temperature and lower speed are always recommended for the best results.
+text = Printing Silk Filament\nDid you know that Silk filament needs special consideration to print it successfully? Higher temperature and lower speed are always recommended for the best results.
 
 [hint:Brim for better adhesion]
 text = Brim for better adhesion\nDid you know that when printed models have a small contact interface with the printing surface, it's recommended to use a brim?
@@ -167,13 +167,13 @@ text = Set parameters for multiple objects\nDid you know that you can set slicin
 text = Stack objects\nDid you know that you can stack objects as a whole one?
 
 [hint:Flush into support/objects/infill]
-text = Flush into support/objects/infill\nDid you know that you can reduce wasted filament by flushing it into support/objects/infill during filament changes?
+text = Flush into support/objects/infill\nDid you know that you can reduce wasted filament by flushing it into support/objects/infill during filament change?
 
 [hint:Improve strength]
 text = Improve strength\nDid you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?
 
 [hint:When do you need to print with the printer door opened]
-text = When do you need to print with the printer door opened?\nDid you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature? There is more info about this in the Wiki.
+text = When do you need to print with the printer door opened?\nDid you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature? More info about this in the Wiki.
 
 [hint:Avoid warping]
 text = Avoid warping\nDid you know that when printing materials that are prone to warping such as ABS, appropriately increasing the heatbed temperature can reduce the probability of warping?

resources/images/extruder_sync.svg

@@ -1,3 +0,0 @@
-<svg width="20" height="20" viewBox="0 0 20 20" fill="none" xmlns="http://www.w3.org/2000/svg">
-<path fill-rule="evenodd" clip-rule="evenodd" d="M13.2992 1.42627C10.7774 1.42627 8.73315 3.47056 8.73315 5.99231C8.73315 8.51406 10.7774 10.5583 13.2992 10.5583C13.3609 10.5583 13.4223 10.5571 13.4834 10.5547C15.9197 10.4581 17.8652 8.45238 17.8652 5.99231C17.8652 3.47056 15.8209 1.42627 13.2992 1.42627ZM15.6185 11.0536C17.5346 10.1741 18.8652 8.23861 18.8652 5.99231C18.8652 2.91827 16.3732 0.42627 13.2992 0.42627C11.5793 0.42627 10.0417 1.2063 9.02067 2.43188H2.31853C1.93193 2.43188 1.61853 2.74528 1.61853 3.13188V12.4712C1.61853 12.6313 1.6723 12.7789 1.76278 12.8968C1.76671 13.0046 1.79621 13.1144 1.85576 13.2185L3.48408 16.0649C3.60875 16.2829 3.8406 16.4173 4.09168 16.4173H6.75859L7.97903 19.1586C8.22556 19.7123 9.01148 19.7123 9.25801 19.1586L10.4784 16.4173H13.1454C13.3965 16.4173 13.6283 16.2829 13.753 16.0649L15.3813 13.2185C15.4409 13.1144 15.4704 13.0046 15.4743 12.8968C15.5648 12.7789 15.6185 12.6313 15.6185 12.4712V11.0536ZM13.4429 11.5565C13.8469 11.5463 14.2403 11.493 14.6185 11.4011V12.1709H2.61853V3.43188H8.35573C7.95792 4.19837 7.73315 5.06909 7.73315 5.99231C7.73315 9.06635 10.2252 11.5583 13.2992 11.5583C13.3472 11.5583 13.3951 11.5577 13.4429 11.5565ZM2.98076 13.1712H14.2563L12.9714 15.4173H9.85194L9.84578 15.4173H7.39126L7.3851 15.4173H4.26569L2.98076 13.1712ZM9.38381 16.4173L8.61852 18.1363L7.85322 16.4173H9.38381ZM12.2021 3.36422C12.3973 3.55948 12.3973 3.87606 12.2021 4.07133L11.743 4.53041H16.0625C16.3386 4.53041 16.5625 4.75426 16.5625 5.03041C16.5625 5.30655 16.3386 5.53041 16.0625 5.53041H10.7773C10.2428 5.53041 9.97507 4.88412 10.353 4.50614L11.495 3.36422C11.6902 3.16896 12.0068 3.16896 12.2021 3.36422ZM14.3963 7.91305C14.2011 8.10831 14.2011 8.42489 14.3963 8.62015C14.5916 8.81542 14.9082 8.81542 15.1034 8.62015L16.2453 7.47823C16.6233 7.10026 16.3556 6.45397 15.8211 6.45397L10.5359 6.45397C10.2597 6.45397 10.0359 6.67783 10.0359 6.95397C10.0359 7.23011 10.2597 7.45397 10.5359 7.45397L14.8554 7.45397L14.3963 7.91305Z" fill="#262E30"/>
-</svg>

resources/profiles/Afinia.json

@@ -1,6 +1,6 @@
 {
 	"name": "Afinia",
-	"version": "02.04.00.03",
+	"version": "02.04.00.01",
 	"force_update": "0",
 	"description": "Afinia configurations",
 	"machine_model_list": [
@@ -124,6 +124,14 @@
 			"name": "fdm_filament_tpu",
 			"sub_path": "filament/fdm_filament_tpu.json"
 		},
+		{
+			"name": "Afinia ABS",
+			"sub_path": "filament/Afinia ABS.json"
+		},
+		{
+			"name": "Afinia ABS+",
+			"sub_path": "filament/Afinia ABS+.json"
+		},
 		{
 			"name": "Afinia ABS+@HS",
 			"sub_path": "filament/Afinia ABS+@HS.json"
@@ -132,18 +140,34 @@
 			"name": "Afinia ABS@HS",
 			"sub_path": "filament/Afinia ABS@HS.json"
 		},
+		{
+			"name": "Afinia Value ABS",
+			"sub_path": "filament/Afinia Value ABS.json"
+		},
 		{
 			"name": "Afinia Value ABS@HS",
 			"sub_path": "filament/Afinia Value ABS@HS.json"
 		},
+		{
+			"name": "Afinia PLA",
+			"sub_path": "filament/Afinia PLA.json"
+		},
 		{
 			"name": "Afinia PLA@HS",
 			"sub_path": "filament/Afinia PLA@HS.json"
 		},
+		{
+			"name": "Afinia Value PLA",
+			"sub_path": "filament/Afinia Value PLA.json"
+		},
 		{
 			"name": "Afinia Value PLA@HS",
 			"sub_path": "filament/Afinia Value PLA@HS.json"
 		},
+		{
+			"name": "Afinia TPU",
+			"sub_path": "filament/Afinia TPU.json"
+		},
 		{
 			"name": "Afinia TPU@HS",
 			"sub_path": "filament/Afinia TPU@HS.json"

resources/profiles/Afinia/filament/Afinia ABS+.json

@@ -0,0 +1,37 @@
+{
+	"type": "filament",
+	"filament_id": "GFB00",
+	"setting_id": "i5tf9foHnTVNmA2r",
+	"name": "Afinia ABS+",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_abs",
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_vendor": [
+		"Afinia"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"nozzle_temperature": [
+		"275"
+	],
+	"nozzle_temperature_initial_layer": [
+		"275"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Afinia H400 Pro 0.4 nozzle",
+		"Afinia H400 Pro 0.6 nozzle"
+	]
+}

resources/profiles/Afinia/filament/Afinia ABS.json

@@ -0,0 +1,31 @@
+{
+	"type": "filament",
+	"filament_id": "GFB00",
+	"setting_id": "LhDHvMepbh8ecfQT",
+	"name": "Afinia ABS",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_abs",
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_vendor": [
+		"Afinia"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Afinia H400 Pro 0.4 nozzle",
+		"Afinia H400 Pro 0.6 nozzle"
+	]
+}

resources/profiles/Afinia/filament/Afinia PLA.json

@@ -0,0 +1,34 @@
+{
+	"type": "filament",
+	"filament_id": "GFA00",
+	"setting_id": "1qEFsay7kjYIUkpG",
+	"name": "Afinia PLA",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_pla",
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"filament_vendor": [
+		"Afinia"
+	],
+	"filament_long_retractions_when_cut": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"18"
+	],
+	"compatible_printers": [
+		"Afinia H400 Pro 0.4 nozzle",
+		"Afinia H400 Pro 0.6 nozzle"
+	]
+}

resources/profiles/Afinia/filament/Afinia TPU.json

@@ -0,0 +1,28 @@
+{
+	"type": "filament",
+	"name": "Afinia TPU",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "E7WBTARZ971LaDMj",
+	"filament_id": "GFU01",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Afinia"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"filament_cost": [
+		"41.99"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"compatible_printers": [
+		"Afinia H400 Pro 0.4 nozzle",
+		"Afinia H400 Pro 0.6 nozzle"
+	]
+}

resources/profiles/Afinia/filament/Afinia Value ABS.json

@@ -0,0 +1,37 @@
+{
+	"type": "filament",
+	"filament_id": "GFB00",
+	"setting_id": "jEYVpOPBjFtQ0DXn",
+	"name": "Afinia Value ABS",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_abs",
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_vendor": [
+		"Afinia"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"nozzle_temperature": [
+		"245"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Afinia H400 Pro 0.4 nozzle",
+		"Afinia H400 Pro 0.6 nozzle"
+	]
+}

resources/profiles/Afinia/filament/Afinia Value PLA.json

@@ -0,0 +1,40 @@
+{
+	"type": "filament",
+	"filament_id": "GFA00",
+	"setting_id": "oNBk0IxmW7C99WI3",
+	"name": "Afinia Value PLA",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_pla",
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_density": [
+		"1.26"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"21"
+	],
+	"filament_vendor": [
+		"Afinia"
+	],
+	"filament_long_retractions_when_cut": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"18"
+	],
+	"nozzle_temperature": [
+		"190"
+	],
+	"nozzle_temperature_initial_layer": [
+		"190"
+	],
+	"compatible_printers": [
+		"Afinia H400 Pro 0.4 nozzle",
+		"Afinia H400 Pro 0.6 nozzle"
+	]
+}

resources/profiles/Afinia/machine/Afinia H+1(HS).json

@@ -8,5 +8,5 @@
 	"bed_model": "",
 	"bed_texture": "",
 	"hotend_model": "",
-	"default_materials": "Afinia ABS@HS;Afinia PLA@HS"
+	"default_materials": "Afinia ABS;Afinia PLA"
 }

resources/profiles/Anker/process/0.20mm Optimal 0.6 nozzle @Anker.json

@@ -1,7 +1,6 @@
 {
 	"type": "process",
 	"name": "0.20mm Optimal 0.6 nozzle @Anker",
-	"renamed_from": "0.20mm Optimal 0.6 nozzle @Anker.json",
 	"inherits": "fdm_process_anker_common_0_6",
 	"from": "system",
 	"setting_id": "re5qmcOFJ1OJP3Ip",

resources/profiles/Anycubic.json

@@ -1,6 +1,6 @@
 {
 	"name": "Anycubic",
-	"version": "02.04.00.03",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Anycubic configurations",
 	"machine_model_list": [

resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max.json

@@ -8,5 +8,5 @@
 	"bed_model": "Anycubic Kobra 2 Max_buildplate_model.stl",
 	"bed_texture": "Anycubic Kobra 2 Max_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle;Generic PLA High Speed @System;Generic ABS @System;Generic PLA Silk @System;Generic PETG @System;Generic TPU @System;Generic PLA Matte @System"
+	"default_materials": "Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 2 Max 0.4 nozzle;Generic ABS @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 2 Max 0.4 nozzle;Generic TPU @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 2 Max 0.4 nozzle"
 }

resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus.json

@@ -8,5 +8,5 @@
 	"bed_model": "Anycubic Kobra 2 Plus_buildplate_model.stl",
 	"bed_texture": "Anycubic Kobra 2 Plus_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Anycubic PLA @Anycubic Kobra 2 Plus 0.4 nozzle;Generic PLA High Speed @System;Generic ABS @System;Generic PLA Silk @System;Generic PETG @System;Generic TPU @System;Generic PLA Matte @System"
+	"default_materials": "Anycubic PLA @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 2 Plus 0.4 nozzle;Generic ABS @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PETG @Anycubic Kobra 2 Plus 0.4 nozzle;Generic TPU @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 2 Plus 0.4 nozzle"
 }

resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro.json

@@ -8,5 +8,5 @@
 	"bed_model": "Anycubic Kobra 2 Pro_buildplate_model.stl",
 	"bed_texture": "Anycubic Kobra 2 Pro_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Anycubic PLA @Anycubic Kobra 2 Pro 0.4 nozzle;Generic PLA High Speed @System;Generic ABS @System;Generic PLA Silk @System;Generic PETG @System;Generic TPU @System;Generic PLA Matte @System"
+	"default_materials": "Anycubic PLA @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 2 Pro 0.4 nozzle;Generic ABS @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PETG @Anycubic Kobra 2 Pro 0.4 nozzle;Generic TPU @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 2 Pro 0.4 nozzle"
 }

resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max.json

@@ -9,5 +9,5 @@
 	"bed_texture": "Anycubic Kobra 3 Max_buildplate_texture.svg",
 	"default_bed_type": "Textured PEI Plate",
 	"hotend_model": "",
-	"default_materials": "Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle;Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle"
+	"default_materials": "Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle;Generic PLA @Anycubic Kobra 3 Max 0.4 nozzle;Generic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle;Generic ABS @Anycubic Kobra 3 Max 0.4 nozzle;Generic PETG @Anycubic Kobra 3 Max 0.4 nozzle;Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle;Generic TPU @Anycubic Kobra 3 Max 0.4 nozzle"
 }

resources/profiles/Anycubic/machine/Anycubic Kobra 3.json

@@ -8,5 +8,5 @@
 	"bed_model": "Anycubic Kobra 3_buildplate_model.stl",
 	"bed_texture": "Anycubic Kobra 3_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Anycubic PLA @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 3 0.4 nozzle;Generic ABS @Anycubic Kobra 3 0.4 nozzle;Generic PLA Silk @System;Anycubic PETG @Anycubic Kobra 3 0.4 nozzle;Generic TPU @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 3 0.4 nozzle;Anycubic ASA @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 0.2 nozzle;Anycubic PLA @Anycubic Kobra 3 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 0.8 nozzle"
+	"default_materials": "Anycubic PLA @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 3 0.4 nozzle;Generic ABS @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 3 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 0.4 nozzle;Generic TPU @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 3 0.4 nozzle;Anycubic ASA @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 0.2 nozzle;Anycubic PLA @Anycubic Kobra 3 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 0.8 nozzle"
 }

resources/profiles/Anycubic/machine/Anycubic Kobra Neo.json

@@ -8,5 +8,5 @@
 	"bed_model": "Anycubic Kobra Neo_buildplate_model.stl",
 	"bed_texture": "Anycubic Kobra Neo_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Anycubic PLA @Anycubic Kobra Neo 0.4 nozzle"
+	"default_materials": "Anycubic Generic PLA"
 }

resources/profiles/Anycubic/machine/Anycubic Kobra S1.json

@@ -8,5 +8,5 @@
 	"bed_model": "Anycubic Kobra S1_buildplate_model.stl",
 	"bed_texture": "Anycubic Kobra S1_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle;Anycubic PETG @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle;Generic PLA Matte @System;Anycubic ASA @Anycubic Kobra S1 0.4 nozzle;Anycubic ABS @Anycubic Kobra S1 0.4 nozzle;Generic PA @System;Generic PC @System;Generic PVA @System;Anycubic TPU @Anycubic Kobra S1 0.4 nozzle"
+	"default_materials": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle;Anycubic PETG @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra S1 0.4 nozzle;Anycubic ASA @Anycubic Kobra S1 0.4 nozzle;Anycubic ABS @Anycubic Kobra S1 0.4 nozzle;Anycubic ASA @Anycubic Kobra S1 0.4 nozzle;Anycubic PA @Anycubic Kobra S1 0.4 nozzle;Anycubic PC @Anycubic Kobra S1 0.4 nozzle;Anycubic PETG @Anycubic Kobra S1 0.4 nozzle;Anycubic PVA @Anycubic Kobra S1 0.4 nozzle;Anycubic TPU @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle"
 }

resources/profiles/Anycubic/machine/Anycubic Predator.json

@@ -8,5 +8,5 @@
 	"bed_model": "Anycubic Predator_buildplate_model.stl",
 	"bed_texture": "Anycubic Predator_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
+	"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
 }

resources/profiles/Artillery.json

@@ -1,6 +1,6 @@
 {
 	"name": "Artillery",
-	"version": "02.04.00.03",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Artillery configurations",
 	"machine_model_list": [

resources/profiles/Artillery/machine/Artillery M1 Pro.json

@@ -10,5 +10,5 @@
 	"hotend_model": "",
 	"default_bed_type": "Textured PEI Plate",
 	"not_support_bed_type": "Engineering Plate;Textured Cool Plate;Smooth PEI Plate",
-	"default_materials": "Artillery PLA Basic @Artillery M1 Pro 0.4 nozzle;Artillery ABS @Artillery M1 Pro 0.4 nozzle;Artillery ASA @Artillery M1 Pro 0.4 nozzle;Artillery PA @Artillery M1 Pro 0.4 nozzle;Artillery PA-CF @Artillery M1 Pro 0.4 nozzle;Artillery PC @Artillery M1 Pro 0.4 nozzle;Artillery PET @Artillery M1 Pro 0.4 nozzle;Artillery PETG Basic @Artillery M1 Pro 0.4 nozzle;Artillery PETG-CF @Artillery M1 Pro 0.4 nozzle;Artillery PLA Matte @Artillery M1 Pro 0.4 nozzle;Artillery PLA Silk @Artillery M1 Pro 0.4 nozzle;Artillery PLA-CF @Artillery M1 Pro 0.4 nozzle;Artillery PVA @Artillery M1 Pro 0.4 nozzle;Artillery TPU @Artillery M1 Pro 0.4 nozzle;Artillery PLA @Artillery M1 Pro 0.6 nozzle"
+	"default_materials": "Artillery PLA Basic;Artillery ABS;Artillery ASA;Artillery PA;Artillery PA-CF;Artillery PC;Artillery PET;Artillery PETG Basic;Artillery PETG-CF;Artillery PLA Basic;Artillery PLA Matte;Artillery PLA Silk;Artillery PLA-CF;Artillery PVA;Artillery TPU;Artillery PLA"
 }

resources/profiles/BBL.json

@@ -1,7 +1,7 @@
 {
 	"name": "Bambulab",
 	"url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-	"version": "02.01.00.20",
+	"version": "02.01.00.18",
 	"force_update": "0",
 	"description": "BBL configurations",
 	"machine_model_list": [
@@ -2177,10 +2177,6 @@
 			"name": "Generic ABS @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic ABS @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth ABS rABS",
-			"sub_path": "filament/addnorth/addnorth ABS rABS.json"
-		},
 		{
 			"name": "PolyLite ABS @BBL A1",
 			"sub_path": "filament/Polymaker/PolyLite ABS @BBL A1.json"
@@ -3009,22 +3005,6 @@
 			"name": "Generic PA @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PA @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth PA Adura",
-			"sub_path": "filament/addnorth/addnorth PA Adura.json"
-		},
-		{
-			"name": "addnorth PA Adura FDA",
-			"sub_path": "filament/addnorth/addnorth PA Adura FDA.json"
-		},
-		{
-			"name": "addnorth PA6 Addlantis",
-			"sub_path": "filament/addnorth/addnorth PA6 Addlantis.json"
-		},
-		{
-			"name": "addnorth PVDF Adamant S1",
-			"sub_path": "filament/addnorth/addnorth PVDF Adamant S1.json"
-		},
 		{
 			"name": "Generic PA-CF",
 			"sub_path": "filament/Generic PA-CF.json"
@@ -3049,10 +3029,6 @@
 			"name": "Generic PA-CF @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PA-CF @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth PA-CF Adura X",
-			"sub_path": "filament/addnorth/addnorth PA-CF Adura X.json"
-		},
 		{
 			"name": "Bambu PC @BBL A1",
 			"sub_path": "filament/Bambu PC @BBL A1.json"
@@ -3353,10 +3329,6 @@
 			"name": "Generic PC @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PC @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth PC BLend HT LCF",
-			"sub_path": "filament/addnorth/addnorth PC BLend HT LCF.json"
-		},
 		{
 			"name": "Generic PCTG @BBL A1",
 			"sub_path": "filament/Generic PCTG @BBL A1.json"
@@ -4213,30 +4185,6 @@
 			"name": "Generic PETG @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PETG @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth PETG Base",
-			"sub_path": "filament/addnorth/addnorth PETG Base.json"
-		},
-		{
-			"name": "addnorth PETG ESD",
-			"sub_path": "filament/addnorth/addnorth PETG ESD.json"
-		},
-		{
-			"name": "addnorth PETG Economy",
-			"sub_path": "filament/addnorth/addnorth PETG Economy.json"
-		},
-		{
-			"name": "addnorth PETG Flame v0",
-			"sub_path": "filament/addnorth/addnorth PETG Flame v0.json"
-		},
-		{
-			"name": "addnorth PETG PRO Matte",
-			"sub_path": "filament/addnorth/addnorth PETG PRO Matte.json"
-		},
-		{
-			"name": "addnorth PETG rPETG Matte",
-			"sub_path": "filament/addnorth/addnorth PETG rPETG Matte.json"
-		},
 		{
 			"name": "Generic PETG HF @BBL A1",
 			"sub_path": "filament/Generic PETG HF @BBL A1.json"
@@ -4357,10 +4305,6 @@
 			"name": "Generic PETG-CF @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PETG-CF @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth PETG-CF Rigid X",
-			"sub_path": "filament/addnorth/addnorth PETG-CF Rigid X.json"
-		},
 		{
 			"name": "PolyLite PETG @BBL A1",
 			"sub_path": "filament/Polymaker/PolyLite PETG @BBL A1.json"
@@ -6645,34 +6589,6 @@
 			"name": "Generic PLA @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PLA @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth PLA E-PLA",
-			"sub_path": "filament/addnorth/addnorth PLA E-PLA.json"
-		},
-		{
-			"name": "addnorth PLA Economy",
-			"sub_path": "filament/addnorth/addnorth PLA Economy.json"
-		},
-		{
-			"name": "addnorth PLA HT-PLA PRO Matte",
-			"sub_path": "filament/addnorth/addnorth PLA HT-PLA PRO Matte.json"
-		},
-		{
-			"name": "addnorth PLA Textura",
-			"sub_path": "filament/addnorth/addnorth PLA Textura.json"
-		},
-		{
-			"name": "addnorth PLA Wood",
-			"sub_path": "filament/addnorth/addnorth PLA Wood.json"
-		},
-		{
-			"name": "addnorth PLA X-PLA",
-			"sub_path": "filament/addnorth/addnorth PLA X-PLA.json"
-		},
-		{
-			"name": "addnorth PLA rPLA RE-ADD",
-			"sub_path": "filament/addnorth/addnorth PLA rPLA RE-ADD.json"
-		},
 		{
 			"name": "Generic PLA High Speed @BBL A1",
 			"sub_path": "filament/Generic PLA High Speed @BBL A1.json"
@@ -6733,10 +6649,6 @@
 			"name": "Generic PLA High Speed @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PLA High Speed @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth PLA X-PLA High Speed",
-			"sub_path": "filament/addnorth/addnorth PLA X-PLA High Speed.json"
-		},
 		{
 			"name": "Generic PLA Silk",
 			"sub_path": "filament/Generic PLA Silk.json"
@@ -6777,10 +6689,6 @@
 			"name": "Generic PLA Silk @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PLA Silk @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth PLA Premium Silk",
-			"sub_path": "filament/addnorth/addnorth PLA Premium Silk.json"
-		},
 		{
 			"name": "Generic PLA-CF",
 			"sub_path": "filament/Generic PLA-CF.json"
@@ -6821,10 +6729,6 @@
 			"name": "Generic PLA-CF @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic PLA-CF @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth PLA-CF Carbon Fiber",
-			"sub_path": "filament/addnorth/addnorth PLA-CF Carbon Fiber.json"
-		},
 		{
 			"name": "Numakers PLA+ @BBL A1",
 			"sub_path": "filament/Numakers/Numakers PLA+ @BBL A1.json"
@@ -7077,6 +6981,10 @@
 			"name": "Panchroma PLA @BBL X1C 0.2 nozzle",
 			"sub_path": "filament/Polymaker/Panchroma PLA @BBL X1C 0.2 nozzle.json"
 		},
+		{
+			"name": "Panchroma PLA Silk @BBL X1C 0.2 nozzle",
+			"sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1C 0.2 nozzle.json"
+		},
 		{
 			"name": "Panchroma PLA Celestial @BBL A1",
 			"sub_path": "filament/Polymaker/Panchroma PLA Celestial @BBL A1.json"
@@ -7473,10 +7381,6 @@
 			"name": "Panchroma PLA Silk @BBL X1C",
 			"sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1C.json"
 		},
-		{
-			"name": "Panchroma PLA Silk @BBL X1C 0.2 nozzle",
-			"sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1C 0.2 nozzle.json"
-		},
 		{
 			"name": "Panchroma PLA Starlight @BBL A1",
 			"sub_path": "filament/Polymaker/Panchroma PLA Starlight @BBL A1.json"
@@ -8985,18 +8889,6 @@
 			"name": "Generic TPU @BBL X2D 0.4 nozzle",
 			"sub_path": "filament/Generic TPU @BBL X2D 0.4 nozzle.json"
 		},
-		{
-			"name": "addnorth TPU EasyFlex",
-			"sub_path": "filament/addnorth/addnorth TPU EasyFlex.json"
-		},
-		{
-			"name": "addnorth TPU Pro Matte 85A",
-			"sub_path": "filament/addnorth/addnorth TPU Pro Matte 85A.json"
-		},
-		{
-			"name": "addnorth TPU Pro Matte 95A",
-			"sub_path": "filament/addnorth/addnorth TPU Pro Matte 95A.json"
-		},
 		{
 			"name": "Generic TPU for AMS @BBL A1",
 			"sub_path": "filament/Generic TPU for AMS @BBL A1.json"

resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json

@@ -1,7 +1,6 @@
 {
 	"type": "filament",
 	"name": "Bambu PLA Tough @BBL X1C",
-	"renamed_from": "Bambu PLA Impact @BBL X1C",
 	"inherits": "Bambu PLA Tough @base",
 	"from": "system",
 	"setting_id": "GFSA09_02",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1.json

@@ -1,7 +1,6 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL A1",
-	"renamed_from": "Panchroma PLA Stain @BBL A1",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_00",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M.json

@@ -1,7 +1,6 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL A1M",
-	"renamed_from": "Panchroma PLA Stain @BBL A1M",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_02",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P.json

@@ -1,7 +1,6 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL P1P",
-	"renamed_from": "Panchroma PLA Stain @BBL P1P",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_04",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1.json

@@ -1,7 +1,6 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL X1",
-	"renamed_from": "Panchroma PLA Stain @BBL X1",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_06",

resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth ABS rABS",
-	"inherits": "Generic ABS @base",
-	"from": "system",
-	"setting_id": "GF_ANRA_00",
-	"filament_id": "GF_ANRA",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"1"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"50"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"105"
-	],
-	"eng_plate_temp_initial_layer": [
-		"105"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"25"
-	],
-	"fan_min_speed": [
-		"0"
-	],
-	"filament_adhesiveness_category": [
-		"200"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"43"
-	],
-	"filament_density": [
-		"1.03"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth ABS rABS"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"ABS"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"105"
-	],
-	"hot_plate_temp_initial_layer": [
-		"105"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"255",
-		"255"
-	],
-	"nozzle_temperature_initial_layer": [
-		"250",
-		"250"
-	],
-	"nozzle_temperature_range_high": [
-		"260"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"overhang_fan_speed": [
-		"50"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"0"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"0"
-	],
-	"temperature_vitrification": [
-		"100"
-	],
-	"textured_plate_temp": [
-		"105"
-	],
-	"textured_plate_temp_initial_layer": [
-		"105"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PA Adura FDA",
-	"inherits": "Generic PA @base",
-	"from": "system",
-	"setting_id": "GF_ANAF_00",
-	"filament_id": "GF_ANAF",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"1"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"50"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"100"
-	],
-	"eng_plate_temp_initial_layer": [
-		"100"
-	],
-	"fan_cooling_layer_time": [
-		"5"
-	],
-	"fan_max_speed": [
-		"30"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"50"
-	],
-	"filament_density": [
-		"1.1"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.99",
-		"0.99"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"8",
-		"11"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1",
-		"1"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PA Adura FDA"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"0.4",
-		"0.4"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"2"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"265",
-		"265"
-	],
-	"nozzle_temperature_initial_layer": [
-		"265",
-		"265"
-	],
-	"nozzle_temperature_range_high": [
-		"270"
-	],
-	"nozzle_temperature_range_low": [
-		"245"
-	],
-	"overhang_fan_speed": [
-		"70"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"40"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"10"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"0"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"0"
-	],
-	"temperature_vitrification": [
-		"110"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PA Adura",
-	"inherits": "Generic PA @base",
-	"from": "system",
-	"setting_id": "GF_ANAD_00",
-	"filament_id": "GF_ANAD",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"1"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"50"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"100"
-	],
-	"eng_plate_temp_initial_layer": [
-		"100"
-	],
-	"fan_cooling_layer_time": [
-		"5"
-	],
-	"fan_max_speed": [
-		"30"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"50"
-	],
-	"filament_density": [
-		"1.1"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.99",
-		"0.99"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"8",
-		"11"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1",
-		"1"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PA Adura"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"0.4",
-		"0.4"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"2"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"265",
-		"265"
-	],
-	"nozzle_temperature_initial_layer": [
-		"265",
-		"265"
-	],
-	"nozzle_temperature_range_high": [
-		"270"
-	],
-	"nozzle_temperature_range_low": [
-		"245"
-	],
-	"overhang_fan_speed": [
-		"70"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"40"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"10"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"0"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"0"
-	],
-	"temperature_vitrification": [
-		"110"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PA-CF Adura X",
-	"inherits": "Generic PA-CF @base",
-	"from": "system",
-	"setting_id": "GF_ANAX_00",
-	"filament_id": "GF_ANAX",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"1"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"50"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"100"
-	],
-	"eng_plate_temp_initial_layer": [
-		"100"
-	],
-	"fan_cooling_layer_time": [
-		"5"
-	],
-	"fan_max_speed": [
-		"30"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"109"
-	],
-	"filament_density": [
-		"1.2"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.99",
-		"0.99"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"8",
-		"15"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PA-CF Adura X"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PA-CF"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"2"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"280",
-		"280"
-	],
-	"nozzle_temperature_initial_layer": [
-		"275",
-		"275"
-	],
-	"nozzle_temperature_range_high": [
-		"280"
-	],
-	"nozzle_temperature_range_low": [
-		"260"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"40"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"2"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"0"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"0"
-	],
-	"temperature_vitrification": [
-		"120"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PA6 Addlantis",
-	"inherits": "Generic PA @base",
-	"from": "system",
-	"setting_id": "GF_ANLA_00",
-	"filament_id": "GF_ANLA",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"1"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"60"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"100"
-	],
-	"eng_plate_temp_initial_layer": [
-		"100"
-	],
-	"fan_cooling_layer_time": [
-		"5"
-	],
-	"fan_max_speed": [
-		"30"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"82"
-	],
-	"filament_density": [
-		"1.18"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.99",
-		"0.99"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"8",
-		"11"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.62 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6",
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PA6 Addlantis"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PA6"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"0.4",
-		"0.4"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"2"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"275",
-		"275"
-	],
-	"nozzle_temperature_initial_layer": [
-		"275",
-		"275"
-	],
-	"nozzle_temperature_range_high": [
-		"285"
-	],
-	"nozzle_temperature_range_low": [
-		"265"
-	],
-	"overhang_fan_speed": [
-		"40"
-	],
-	"overhang_fan_threshold": [
-		"0%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"40"
-	],
-	"slow_down_for_layer_cooling": [
-		"0"
-	],
-	"slow_down_layer_time": [
-		"15"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"0"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"0"
-	],
-	"temperature_vitrification": [
-		"110"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PC BLend HT LCF",
-	"inherits": "Generic PC @base",
-	"from": "system",
-	"setting_id": "GF_ANPBX_00",
-	"filament_id": "GF_ANPBX",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"50"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"40"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"109"
-	],
-	"filament_density": [
-		"1.3"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"15",
-		"15"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PC BLend HT LCF"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PC"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"285",
-		"285"
-	],
-	"nozzle_temperature_initial_layer": [
-		"275",
-		"275"
-	],
-	"nozzle_temperature_range_high": [
-		"290"
-	],
-	"nozzle_temperature_range_low": [
-		"265"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"40"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"2"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"70"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"70"
-	],
-	"temperature_vitrification": [
-		"185"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PETG Base",
-	"inherits": "Generic PETG @base",
-	"from": "system",
-	"setting_id": "GF_ANPE_00",
-	"filament_id": "GF_ANPE",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"90"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"35.6"
-	],
-	"filament_density": [
-		"1.27"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"10",
-		"10"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PETG Base"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"255",
-		"255"
-	],
-	"nozzle_temperature_range_high": [
-		"275"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"70"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"70"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"75"
-	],
-	"textured_plate_temp_initial_layer": [
-		"75"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PETG ESD",
-	"inherits": "Generic PETG @base",
-	"from": "system",
-	"setting_id": "GF_ANEG_00",
-	"filament_id": "GF_ANEG",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"90"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"76"
-	],
-	"filament_density": [
-		"1.3"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.97",
-		"0.97"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"20",
-		"20"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 high reliability - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PETG ESD"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"290",
-		"290"
-	],
-	"nozzle_temperature_initial_layer": [
-		"290",
-		"290"
-	],
-	"nozzle_temperature_range_high": [
-		"270"
-	],
-	"nozzle_temperature_range_low": [
-		"255"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"70"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"70"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"70"
-	],
-	"textured_plate_temp_initial_layer": [
-		"70"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PETG Economy",
-	"inherits": "Generic PETG @base",
-	"from": "system",
-	"setting_id": "GF_ANGE_00",
-	"filament_id": "GF_ANGE",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"90"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"27"
-	],
-	"filament_density": [
-		"1.25"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"10",
-		"10"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PETG Economy"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"255",
-		"255"
-	],
-	"nozzle_temperature_range_high": [
-		"275"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"70"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"70"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"75"
-	],
-	"textured_plate_temp_initial_layer": [
-		"75"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PETG Flame v0",
-	"inherits": "Generic PETG @base",
-	"from": "system",
-	"setting_id": "GF_ANPF_00",
-	"filament_id": "GF_ANPF",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"90"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"71"
-	],
-	"filament_density": [
-		"1.27"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.97",
-		"0.97"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"20",
-		"20"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.4 high reliability - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PETG Flame V0"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"290",
-		"290"
-	],
-	"nozzle_temperature_initial_layer": [
-		"290",
-		"290"
-	],
-	"nozzle_temperature_range_high": [
-		"270"
-	],
-	"nozzle_temperature_range_low": [
-		"255"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"70"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"70"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"70"
-	],
-	"textured_plate_temp_initial_layer": [
-		"70"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PETG PRO Matte",
-	"inherits": "Generic PETG @base",
-	"from": "system",
-	"setting_id": "GF_ANPM_00",
-	"filament_id": "GF_ANPM",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"90"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"54.5"
-	],
-	"filament_density": [
-		"1.27"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"8",
-		"8"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PETG PRO Matte"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_range_high": [
-		"275"
-	],
-	"nozzle_temperature_range_low": [
-		"235"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"1"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"70"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"70"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PETG rPETG Matte",
-	"inherits": "Generic PETG @base",
-	"from": "system",
-	"setting_id": "GF_ANRM_00",
-	"filament_id": "GF_ANRM",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"90"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"36"
-	],
-	"filament_density": [
-		"1.27"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"10",
-		"10"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PETG rPETG Matte"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"255",
-		"255"
-	],
-	"nozzle_temperature_range_high": [
-		"260"
-	],
-	"nozzle_temperature_range_low": [
-		"225"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"70"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"70"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"75"
-	],
-	"textured_plate_temp_initial_layer": [
-		"75"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PETG-CF Rigid X",
-	"inherits": "Generic PETG-CF @base",
-	"from": "system",
-	"setting_id": "GF_ANRX_00",
-	"filament_id": "GF_ANRX",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"100"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"5"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"82"
-	],
-	"filament_density": [
-		"1.3"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"8",
-		"11"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026 – Special thanks to Mats.Z (3DP24, Jonkoping University / Campus Varnamo) for profile improvements during internship autumn 2025.",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PETG-CF Rigid X"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PETG-CF"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"0.4",
-		"0.4"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_range_high": [
-		"275"
-	],
-	"nozzle_temperature_range_low": [
-		"245"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"0"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"40"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"6"
-	],
-	"slow_down_min_speed": [
-		"40"
-	],
-	"supertack_plate_temp": [
-		"70"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"70"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA E-PLA",
-	"inherits": "Generic PLA @base",
-	"from": "system",
-	"setting_id": "GF_ANEP_00",
-	"filament_id": "GF_ANEP",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"55"
-	],
-	"cool_plate_temp_initial_layer": [
-		"5"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA E-PLA"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"55"
-	],
-	"hot_plate_temp_initial_layer": [
-		"55"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"240",
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA Economy",
-	"inherits": "Generic PLA @base",
-	"from": "system",
-	"setting_id": "GF_ANPL_00",
-	"filament_id": "GF_ANPL",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"55"
-	],
-	"cool_plate_temp_initial_layer": [
-		"55"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"23"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA Economy"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"240",
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"200"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA HT-PLA PRO Matte",
-	"inherits": "Generic PLA @base",
-	"from": "system",
-	"setting_id": "GF_ANHTP_00",
-	"filament_id": "GF_ANHTP",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"2"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"55"
-	],
-	"cool_plate_temp_initial_layer": [
-		"55"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"55"
-	],
-	"filament_density": [
-		"1.4"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"8",
-		"11"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA HT-PLA PRO Matte"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"70"
-	],
-	"hot_plate_temp_initial_layer": [
-		"70"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"240",
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_range_high": [
-		"245"
-	],
-	"nozzle_temperature_range_low": [
-		"210"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"75"
-	],
-	"textured_plate_temp_initial_layer": [
-		"75"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA Premium Silk",
-	"inherits": "Generic PLA Silk @base",
-	"from": "system",
-	"setting_id": "GF_ANPS_00",
-	"filament_id": "GF_ANPS",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"50"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"2"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"55"
-	],
-	"cool_plate_temp_initial_layer": [
-		"55"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"fan_max_speed": [
-		"90"
-	],
-	"fan_min_speed": [
-		"70"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"42.5"
-	],
-	"filament_density": [
-		"1.26"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"1",
-		"1"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"8",
-		"10"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6",
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA Premium Silk"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"250",
-		"250"
-	],
-	"nozzle_temperature_initial_layer": [
-		"245",
-		"245"
-	],
-	"nozzle_temperature_range_high": [
-		"255"
-	],
-	"nozzle_temperature_range_low": [
-		"235"
-	],
-	"overhang_fan_speed": [
-		"80"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA Textura",
-	"inherits": "Generic PLA @base",
-	"from": "system",
-	"setting_id": "GF_ANTE_00",
-	"filament_id": "GF_ANTE",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"55"
-	],
-	"cool_plate_temp_initial_layer": [
-		"55"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"55"
-	],
-	"filament_density": [
-		"1.27"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"10",
-		"14"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6",
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA Textura"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_initial_layer": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA Wood",
-	"inherits": "Generic PLA @base",
-	"from": "system",
-	"setting_id": "GF_ANPLW_00",
-	"filament_id": "GF_ANPLW",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"54.5"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"8",
-		"8"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6",
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA Wood"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"230",
-		"230"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230",
-		"230"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"200"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"0"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA X-PLA High Speed",
-	"inherits": "Generic PLA High Speed @base",
-	"from": "system",
-	"setting_id": "GF_ANXPH_00",
-	"filament_id": "GF_ANXPH",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"55"
-	],
-	"cool_plate_temp_initial_layer": [
-		"55"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6",
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA X-PLA High Speed"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"55"
-	],
-	"hot_plate_temp_initial_layer": [
-		"55"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"240",
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA X-PLA",
-	"inherits": "Generic PLA @base",
-	"from": "system",
-	"setting_id": "GF_ANXP_00",
-	"filament_id": "GF_ANXP",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"55"
-	],
-	"cool_plate_temp_initial_layer": [
-		"55"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"39"
-	],
-	"filament_density": [
-		"1.25"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"14",
-		"14"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6",
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA X-PLA"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230",
-		"230"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA rPLA RE-ADD",
-	"inherits": "Generic PLA @base",
-	"from": "system",
-	"setting_id": "GF_ANRPL_00",
-	"filament_id": "GF_ANRPL",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"55"
-	],
-	"cool_plate_temp_initial_layer": [
-		"5"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"23"
-	],
-	"filament_density": [
-		"1.25"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"16"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6",
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA rPLA RE-ADD"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"55"
-	],
-	"hot_plate_temp_initial_layer": [
-		"55"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"240",
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"45"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"45"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json

@@ -1,320 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PLA-CF Carbon Fiber",
-	"inherits": "Generic PLA-CF @base",
-	"from": "system",
-	"setting_id": "GF_ANPCF_00",
-	"filament_id": "GF_ANPCF",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"45"
-	],
-	"cool_plate_temp_initial_layer": [
-		"45"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"37"
-	],
-	"filament_density": [
-		"1.27"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n\n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"14"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PLA-CF Carbon Fiber"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PLA-CF"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"55"
-	],
-	"hot_plate_temp_initial_layer": [
-		"55"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"235"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"nozzle_temperature_range_high": [
-		"250"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"0"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"40"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"7"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"50"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"50"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"55"
-	],
-	"textured_plate_temp_initial_layer": [
-		"55"
-	],
-	"version": "2.0.0.87"
-}

resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth PVDF Adamant S1",
-	"inherits": "Generic PA @base",
-	"from": "system",
-	"setting_id": "GF_ANPV_00",
-	"filament_id": "GF_ANPV",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"1"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"50"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"100"
-	],
-	"eng_plate_temp_initial_layer": [
-		"100"
-	],
-	"fan_cooling_layer_time": [
-		"5"
-	],
-	"fan_max_speed": [
-		"80"
-	],
-	"fan_min_speed": [
-		"25"
-	],
-	"filament_adhesiveness_category": [
-		"400"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"146"
-	],
-	"filament_density": [
-		"1.8"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"1",
-		"1"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"4",
-		"4"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1",
-		"1"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth PVDF Adamant S1"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-	],
-	"filament_type": [
-		"PA"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"0.4",
-		"0.4"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"2"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"265",
-		"265"
-	],
-	"nozzle_temperature_range_high": [
-		"260"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"80"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"0"
-	],
-	"required_nozzle_HRC": [
-		"40"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"supertack_plate_temp": [
-		"0"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"0"
-	],
-	"temperature_vitrification": [
-		"135"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth TPU EasyFlex",
-	"inherits": "Generic TPU @base",
-	"from": "system",
-	"setting_id": "GF_ANEF_00",
-	"filament_id": "GF_ANEF",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"30"
-	],
-	"eng_plate_temp_initial_layer": [
-		"30"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"600"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"82"
-	],
-	"filament_density": [
-		"1.1"
-	],
-	"filament_deretraction_speed": [
-		"40",
-		"40"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"1",
-		"1"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"3.9",
-		"5"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"0",
-		"0"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1",
-		"1"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth TPU EasyFlex"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"TPU"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"35"
-	],
-	"hot_plate_temp_initial_layer": [
-		"35"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"240",
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_range_high": [
-		"250"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"10"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"supertack_plate_temp": [
-		"0"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"0"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"35"
-	],
-	"textured_plate_temp_initial_layer": [
-		"35"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth TPU Pro Matte 85A",
-	"inherits": "Generic TPU @base",
-	"from": "system",
-	"setting_id": "GF_ANTA_00",
-	"filament_id": "GF_ANTA",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"30"
-	],
-	"cool_plate_temp_initial_layer": [
-		"30"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"30"
-	],
-	"eng_plate_temp_initial_layer": [
-		"30"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"600"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"82"
-	],
-	"filament_density": [
-		"1.1"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"1",
-		"1"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"3.2",
-		"5"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.2 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"0",
-		"0"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1",
-		"1"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"40",
-		"40"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth TPU Pro Matte 85A"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"TPU"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"35"
-	],
-	"hot_plate_temp_initial_layer": [
-		"35"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"250",
-		"250"
-	],
-	"nozzle_temperature_initial_layer": [
-		"250",
-		"250"
-	],
-	"nozzle_temperature_range_high": [
-		"250"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"supertack_plate_temp": [
-		"0"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"0"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"35"
-	],
-	"textured_plate_temp_initial_layer": [
-		"35"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json

@@ -1,340 +0,0 @@
-{
-	"type": "filament",
-	"name": "addnorth TPU Pro Matte 95A",
-	"inherits": "Generic TPU @base",
-	"from": "system",
-	"setting_id": "GF_ANTM_00",
-	"filament_id": "GF_ANTM",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
-	"chamber_temperatures": [
-		"0"
-	],
-	"circle_compensation_speed": [
-		"200"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 mini 0.4 nozzle",
-		"Bambu Lab A1 mini 0.6 nozzle",
-		"Bambu Lab A1 mini 0.8 nozzle",
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle",
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle",
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle",
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle",
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle",
-		"Bambu Lab X2D 0.2 nozzle",
-		"Bambu Lab X2D 0.4 nozzle",
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"70"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"counter_coef_1": [
-		"0"
-	],
-	"counter_coef_2": [
-		"0.008"
-	],
-	"counter_coef_3": [
-		"-0.041"
-	],
-	"counter_limit_max": [
-		"0.033"
-	],
-	"counter_limit_min": [
-		"-0.035"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"diameter_limit": [
-		"50"
-	],
-	"during_print_exhaust_fan_speed": [
-		"70"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"30"
-	],
-	"eng_plate_temp_initial_layer": [
-		"30"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"600"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cost": [
-		"82"
-	],
-	"filament_density": [
-		"1.1"
-	],
-	"filament_deretraction_speed": [
-		"40",
-		"40"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_flow_ratio": [
-		"1",
-		"1"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"3.9",
-		"5"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_notes": "File Version:2.3 - V.Pack:18_05_2026",
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"0",
-		"0"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1",
-		"1"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"40",
-		"40"
-	],
-	"filament_scarf_gap": [
-		"15%"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_length": [
-		"10"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_settings_id": [
-		"addnorth TPU Pro Matte 95A"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
-	],
-	"filament_type": [
-		"TPU"
-	],
-	"filament_vendor": [
-		"addnorth"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hole_coef_1": [
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.008"
-	],
-	"hole_coef_3": [
-		"0.23415"
-	],
-	"hole_limit_max": [
-		"0.22"
-	],
-	"hole_limit_min": [
-		"0.088"
-	],
-	"hot_plate_temp": [
-		"35"
-	],
-	"hot_plate_temp_initial_layer": [
-		"35"
-	],
-	"impact_strength_z": [
-		"10"
-	],
-	"nozzle_temperature": [
-		"240",
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"235",
-		"235"
-	],
-	"nozzle_temperature_range_high": [
-		"250"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"overhang_threshold_participating_cooling": [
-		"95%"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"10"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"supertack_plate_temp": [
-		"0"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"0"
-	],
-	"temperature_vitrification": [
-		"50"
-	],
-	"textured_plate_temp": [
-		"35"
-	],
-	"textured_plate_temp_initial_layer": [
-		"35"
-	],
-	"version": "2.0.0.77"
-}

resources/profiles/BBL/machine/Bambu Lab H2D Pro.json

@@ -11,5 +11,5 @@
 	"family": "BBL-3DP",
 	"machine_tech": "FFF",
 	"model_id": "O1E",
-	"default_materials": "Bambu PLA Basic @BBL H2DP;Bambu PLA-CF @BBL H2DP 0.6 nozzle;Bambu PETG Basic @BBL H2DP 0.6 nozzle;Bambu ABS @BBL H2DP;Bambu PETG HF @BBL H2DP 0.2 nozzle;Bambu PLA Silk @BBL H2DP;Bambu PLA Matte @BBL H2DP;Bambu PC @BBL H2DP 0.2 nozzle;Bambu PA-CF @BBL H2DP"
+	"default_materials": "Bambu PLA Basic @BBL H2DP;Bambu PLA-CF @BBL H2DP;Bambu PETG Basic @BBL H2DP;Bambu ABS @BBL H2DP;Bambu PETG HF @BBL H2DP;Bambu PLA Silk @BBL H2DP;Bambu PLA Matte @BBL H2DP;Bambu PC @BBL H2DP;Bambu PA-CF @BBL H2DP"
 }