always run check_preset_references

Remove the orphaned "0.20mm Standard @Comgrow T500 1.0" process preset and its process_list entry. Its only compatible printer "Comgrow T500 1.0 nozzle" never existed (the T500 model defines nozzle diameters 0.4/0.6/0.8 only).

.github/workflows/auto-close-duplicates.yml

@@ -15,7 +15,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
 
       - name: Setup Bun
         uses: oven-sh/setup-bun@v2

.github/workflows/backfill-duplicate-comments.yml

@@ -29,7 +29,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
       
       - name: Setup Bun
         uses: oven-sh/setup-bun@v2

.github/workflows/build_all.yml

@@ -131,7 +131,7 @@ jobs:
     if: ${{ !cancelled() && success() }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
         with:
           sparse-checkout: |
             .github
@@ -204,7 +204,7 @@ jobs:
     - name: "Remove unneeded stuff to free disk space"
       run:
         rm -rf /usr/local/lib/android/* /usr/share/dotnet/* /opt/ghc1/* "/usr/local/share/boost1/*" /opt/hostedtoolcache1/*
-    - uses: actions/checkout@v7
+    - uses: actions/checkout@v6
     - name: Get the version and date
       run: |
         ver_pure=$(grep 'set(SoftFever_VERSION' version.inc | cut -d '"' -f2)
@@ -223,14 +223,14 @@ jobs:
     # Manage flatpak-builder cache externally so PRs restore but never upload
     - name: Restore flatpak-builder cache
       if: github.event_name == 'pull_request'
-      uses: actions/cache/restore@v6
+      uses: actions/cache/restore@v5
       with:
         path: .flatpak-builder
         key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.event.pull_request.base.sha }}
         restore-keys: flatpak-builder-${{ matrix.variant.arch }}-
     - name: Save/restore flatpak-builder cache
       if: github.event_name != 'pull_request'
-      uses: actions/cache@v6
+      uses: actions/cache@v5
       with:
         path: .flatpak-builder
         key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.sha }}

.github/workflows/build_check_cache.yml

@@ -26,7 +26,7 @@ jobs:
       valid-cache: ${{ steps.cache_deps.outputs.cache-hit }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
         with:
           lfs: 'false'
         
@@ -46,7 +46,7 @@ jobs:
             
       - name: load cache
         id: cache_deps
-        uses: actions/cache@v6
+        uses: actions/cache@v5
         with:
           path: ${{ steps.set_outputs.outputs.cache-path }}
           key: ${{ steps.set_outputs.outputs.cache-key }}

.github/workflows/build_deps.yml

@@ -34,12 +34,12 @@ jobs:
 
       # Setup the environment
       - name: Checkout
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
         with:
           lfs: 'false'
 
       - name: load cached deps
-        uses: actions/cache@v6
+        uses: actions/cache@v5
         with:
           path: ${{ inputs.cache-path }}
           key: ${{ inputs.cache-key }}

.github/workflows/build_orca.yml

@@ -37,13 +37,13 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
         with:
           lfs: 'false'
 
       - name: load cached deps
         if: ${{ !(runner.os == 'macOS' && inputs.macos-combine-only) }}
-        uses: actions/cache@v6
+        uses: actions/cache@v5
         with:
           path: ${{ inputs.cache-path }}
           key: ${{ inputs.cache-key }}

.github/workflows/check_locale.yml

@@ -14,7 +14,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:  
       - name: Checkout repository
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
 
       - name: Install gettext 
         run: |

.github/workflows/check_profiles.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
 
       - name: Run extra JSON check
         id: extra_json_check
@@ -41,7 +41,7 @@ jobs:
           curl -L -o OrcaSlicer_profile_validator https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/OrcaSlicer_profile_validator_Linux_Ubuntu2404_nightly
           chmod +x ./OrcaSlicer_profile_validator
 
-      # validate profiles
+      # Validate all system profiles.
       - name: validate system profiles
         id: validate_system
         continue-on-error: true
@@ -57,121 +57,17 @@ jobs:
           set +e
           ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 -v BBL -f 2>&1 | tee ${{ runner.temp }}/validate_filament_subtypes.log
           exit ${PIPESTATUS[0]}
-      # Flag inherits/compatible_printers/compatible_prints references that point at a deleted or
-      # renamed preset. Opt-in per vendor for now (via -r); enabled for BBL and Qidi until other
-      # vendors' profiles are cleaned up. Runs before the custom-preset injection below.
-      - name: validate preset references for BBL and Qidi profiles
-        id: validate_preset_references
-        continue-on-error: true
-        run: |
-          set +e
-          rc=0
-          for v in BBL Qidi; do
-            ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 -v "$v" -r 2>&1 | tee -a ${{ runner.temp }}/validate_preset_references.log
-            [ ${PIPESTATUS[0]} -ne 0 ] && rc=1
-          done
-          exit $rc
 
       - name: validate custom presets
         id: validate_custom
         continue-on-error: true
         working-directory: ${{ github.workspace }}
         run: |
-          fixtures_dir="${{ runner.temp }}/profile-fixtures"
-          output_dir="${{ runner.temp }}/custom-preset-validation"
-          combined_log="${{ runner.temp }}/validate_custom.log"
-          summary="${output_dir}/summary.md"
-          release_url="https://github.com/OrcaSlicer/OrcaSlicer-profile-validator/releases/download/fixture-archive"
-
-          rm -rf "${fixtures_dir}" "${output_dir}"
-          mkdir -p "${fixtures_dir}" "${output_dir}"
-
-          curl -fsSL -o "${fixtures_dir}/manifest.json" "${release_url}/manifest.json"
-
-          MANIFEST_PATH="${fixtures_dir}/manifest.json" python3 <<'PY' > "${fixtures_dir}/fixtures.tsv"
-          import json
-          import os
-
-          with open(os.environ["MANIFEST_PATH"], encoding="utf-8") as fh:
-              manifest = json.load(fh)
-
-          if isinstance(manifest, dict):
-              entries = manifest.get("fixtures", [])
-          else:
-              entries = manifest
-
-          for entry in entries:
-              version = entry.get("version", "")
-              asset = entry.get("asset", "")
-              sha256 = entry.get("asset_sha256", "")
-              if not version or not asset:
-                  continue
-              print(f"{version}\t{asset}\t{sha256}")
-          PY
-
-          if [ ! -s "${fixtures_dir}/fixtures.tsv" ]; then
-            echo "No custom preset fixtures found in ${release_url}/manifest.json" | tee "${combined_log}"
-            exit 1
-          fi
-
-          {
-            echo "## Custom Preset Fixture Validation"
-            echo ""
-            echo "| Version | Status | Log |"
-            echo "| --- | --- | --- |"
-          } > "${summary}"
-
-          status=0
-          failed_logs=()
-
-          while IFS=$'\t' read -r version asset expected_sha256; do
-            fixture_zip="${fixtures_dir}/${asset}"
-            asset_url_name="$(python3 -c 'import sys, urllib.parse; print(urllib.parse.quote(sys.argv[1], safe=""))' "${asset}")"
-            profile_tree="${output_dir}/profiles-${version}"
-            log_path="${output_dir}/${version}.log"
-
-            curl -fsSL -o "${fixture_zip}" "${release_url}/${asset_url_name}"
-
-            if [ -n "${expected_sha256}" ] && [ "${expected_sha256}" != "<sha256>" ]; then
-              echo "${expected_sha256}  ${fixture_zip}" | sha256sum -c -
-            fi
-
-            rm -rf "${profile_tree}"
-            mkdir -p "${profile_tree}"
-            cp -a "${{ github.workspace }}/resources/profiles/." "${profile_tree}/"
-            rm -rf "${profile_tree}/user"
-            unzip -q "${fixture_zip}" -d "${profile_tree}"
-
-            set +e
-            ./OrcaSlicer_profile_validator -p "${profile_tree}" -l 2 > "${log_path}" 2>&1
-            result=$?
-            set -e
-
-            if [ "${result}" -eq 0 ]; then
-              echo "| ${version} | PASS | ${version}.log |" >> "${summary}"
-            else
-              echo "| ${version} | FAIL | ${version}.log |" >> "${summary}"
-              failed_logs+=("${log_path}")
-              status=1
-            fi
-          done < "${fixtures_dir}/fixtures.tsv"
-
-          {
-            cat "${summary}"
-            if [ "${#failed_logs[@]}" -gt 0 ]; then
-              echo ""
-              echo "## Failed Fixture Logs"
-              for log_path in "${failed_logs[@]}"; do
-                echo ""
-                echo "### $(basename "${log_path}" .log)"
-                echo '```'
-                head -c 12000 "${log_path}" || echo "No output captured"
-                echo '```'
-              done
-            fi
-          } | tee "${combined_log}"
-
-          exit "${status}"
+          set +e
+          curl -LJO https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/orca_custom_preset_tests.zip
+          unzip -q ./orca_custom_preset_tests.zip -d ${{ github.workspace }}/resources/profiles
+          ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 2>&1 | tee ${{ runner.temp }}/validate_custom.log
+          exit ${PIPESTATUS[0]}
 
       - name: Prepare PR number for comment workflow
         if: ${{ always() && github.event_name == 'pull_request' }}
@@ -180,7 +76,7 @@ jobs:
           echo "${{ github.event.pull_request.number }}" > ${{ runner.temp }}/profile-check-results/pr_number.txt
 
       - name: Prepare comment artifact
-        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_preset_references.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         run: |
           {
             # Marker matched by check_profiles_comment.yml to delete prior comments.
@@ -215,15 +111,6 @@ jobs:
               echo ""
             fi
 
-            if [ "${{ steps.validate_preset_references.outcome }}" = "failure" ]; then
-              echo "### BBL/Qidi Preset Reference Validation Failed"
-              echo ""
-              echo '```'
-              head -c 30000 ${{ runner.temp }}/validate_preset_references.log || echo "No output captured"
-              echo '```'
-              echo ""
-            fi
-
             if [ "${{ steps.validate_custom.outcome }}" = "failure" ]; then
               echo "### Custom Preset Validation Failed"
               echo ""
@@ -246,7 +133,7 @@ jobs:
           retention-days: 1
 
       - name: Fail if any check failed
-        if: ${{ always() && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_preset_references.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_filament_subtypes.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         run: |
           echo "One or more profile checks failed. See above for details."
           exit 1

.github/workflows/dedupe-issues.yml

@@ -20,7 +20,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
 
       - name: Run Claude Code slash command
         uses: anthropics/claude-code-base-action@beta

.github/workflows/doxygen-docs.yml

@@ -26,7 +26,7 @@ jobs:
           remove-existing-swap-files: true
 
       - name: Checkout repository
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
 
       - name: Install Doxygen and Graphviz
         run: |

.github/workflows/shellcheck.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       - name: Cache shellcheck download
         id: cache-shellcheck-v0_11
-        uses: actions/cache@v6
+        uses: actions/cache@v5
         with:
           path: ~/shellcheck
           key: ${{ runner.os }}-shellcheck-v0_11
@@ -36,7 +36,7 @@ jobs:
           tar -xvf ~/sc.tar.xz -C ~
           mv ~/shellcheck-"${INPUT_VERSION}"/shellcheck ~/shellcheck
 
-      - uses: actions/checkout@v7
+      - uses: actions/checkout@v6
         with:
           fetch-depth: 1
 

.github/workflows/update-translation.yml

@@ -10,7 +10,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:  
       - name: Checkout repository
-        uses: actions/checkout@v7
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6

resources/profiles/Afinia.json

@@ -1,6 +1,6 @@
 {
 	"name": "Afinia",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Afinia configurations",
 	"machine_model_list": [
@@ -124,14 +124,6 @@
 			"name": "fdm_filament_tpu",
 			"sub_path": "filament/fdm_filament_tpu.json"
 		},
-		{
-			"name": "Afinia ABS",
-			"sub_path": "filament/Afinia ABS.json"
-		},
-		{
-			"name": "Afinia ABS+",
-			"sub_path": "filament/Afinia ABS+.json"
-		},
 		{
 			"name": "Afinia ABS+@HS",
 			"sub_path": "filament/Afinia ABS+@HS.json"
@@ -140,34 +132,18 @@
 			"name": "Afinia ABS@HS",
 			"sub_path": "filament/Afinia ABS@HS.json"
 		},
-		{
-			"name": "Afinia Value ABS",
-			"sub_path": "filament/Afinia Value ABS.json"
-		},
 		{
 			"name": "Afinia Value ABS@HS",
 			"sub_path": "filament/Afinia Value ABS@HS.json"
 		},
-		{
-			"name": "Afinia PLA",
-			"sub_path": "filament/Afinia PLA.json"
-		},
 		{
 			"name": "Afinia PLA@HS",
 			"sub_path": "filament/Afinia PLA@HS.json"
 		},
-		{
-			"name": "Afinia Value PLA",
-			"sub_path": "filament/Afinia Value PLA.json"
-		},
 		{
 			"name": "Afinia Value PLA@HS",
 			"sub_path": "filament/Afinia Value PLA@HS.json"
 		},
-		{
-			"name": "Afinia TPU",
-			"sub_path": "filament/Afinia TPU.json"
-		},
 		{
 			"name": "Afinia TPU@HS",
 			"sub_path": "filament/Afinia TPU@HS.json"

resources/profiles/Afinia/filament/Afinia ABS+.json

@@ -1,37 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "GFB00",
-	"setting_id": "i5tf9foHnTVNmA2r",
-	"name": "Afinia ABS+",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_abs",
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_vendor": [
-		"Afinia"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	],
-	"nozzle_temperature": [
-		"275"
-	],
-	"nozzle_temperature_initial_layer": [
-		"275"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Afinia H400 Pro 0.4 nozzle",
-		"Afinia H400 Pro 0.6 nozzle"
-	]
-}

resources/profiles/Afinia/filament/Afinia ABS.json

@@ -1,31 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "GFB00",
-	"setting_id": "LhDHvMepbh8ecfQT",
-	"name": "Afinia ABS",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_abs",
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_vendor": [
-		"Afinia"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Afinia H400 Pro 0.4 nozzle",
-		"Afinia H400 Pro 0.6 nozzle"
-	]
-}

resources/profiles/Afinia/filament/Afinia PLA.json

@@ -1,34 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "GFA00",
-	"setting_id": "1qEFsay7kjYIUkpG",
-	"name": "Afinia PLA",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_pla",
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_density": [
-		"1.26"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"21"
-	],
-	"filament_vendor": [
-		"Afinia"
-	],
-	"filament_long_retractions_when_cut": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18"
-	],
-	"compatible_printers": [
-		"Afinia H400 Pro 0.4 nozzle",
-		"Afinia H400 Pro 0.6 nozzle"
-	]
-}

resources/profiles/Afinia/filament/Afinia TPU.json

@@ -1,28 +0,0 @@
-{
-	"type": "filament",
-	"name": "Afinia TPU",
-	"inherits": "fdm_filament_tpu",
-	"from": "system",
-	"setting_id": "E7WBTARZ971LaDMj",
-	"filament_id": "GFU01",
-	"instantiation": "true",
-	"filament_vendor": [
-		"Afinia"
-	],
-	"filament_density": [
-		"1.22"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"filament_cost": [
-		"41.99"
-	],
-	"nozzle_temperature": [
-		"230"
-	],
-	"compatible_printers": [
-		"Afinia H400 Pro 0.4 nozzle",
-		"Afinia H400 Pro 0.6 nozzle"
-	]
-}

resources/profiles/Afinia/filament/Afinia Value ABS.json

@@ -1,37 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "GFB00",
-	"setting_id": "jEYVpOPBjFtQ0DXn",
-	"name": "Afinia Value ABS",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_abs",
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_vendor": [
-		"Afinia"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	],
-	"nozzle_temperature": [
-		"245"
-	],
-	"nozzle_temperature_initial_layer": [
-		"245"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Afinia H400 Pro 0.4 nozzle",
-		"Afinia H400 Pro 0.6 nozzle"
-	]
-}

resources/profiles/Afinia/filament/Afinia Value PLA.json

@@ -1,40 +0,0 @@
-{
-	"type": "filament",
-	"filament_id": "GFA00",
-	"setting_id": "oNBk0IxmW7C99WI3",
-	"name": "Afinia Value PLA",
-	"from": "system",
-	"instantiation": "true",
-	"inherits": "fdm_filament_pla",
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_density": [
-		"1.26"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"21"
-	],
-	"filament_vendor": [
-		"Afinia"
-	],
-	"filament_long_retractions_when_cut": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18"
-	],
-	"nozzle_temperature": [
-		"190"
-	],
-	"nozzle_temperature_initial_layer": [
-		"190"
-	],
-	"compatible_printers": [
-		"Afinia H400 Pro 0.4 nozzle",
-		"Afinia H400 Pro 0.6 nozzle"
-	]
-}

resources/profiles/Anker/process/0.20mm Optimal 0.6 nozzle @Anker.json

@@ -1,7 +1,6 @@
 {
 	"type": "process",
 	"name": "0.20mm Optimal 0.6 nozzle @Anker",
-	"renamed_from": "0.20mm Optimal 0.6 nozzle @Anker.json",
 	"inherits": "fdm_process_anker_common_0_6",
 	"from": "system",
 	"setting_id": "re5qmcOFJ1OJP3Ip",

resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json

@@ -1,7 +1,6 @@
 {
 	"type": "filament",
 	"name": "Bambu PLA Tough @BBL X1C",
-	"renamed_from": "Bambu PLA Impact @BBL X1C",
 	"inherits": "Bambu PLA Tough @base",
 	"from": "system",
 	"setting_id": "GFSA09_02",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1.json

@@ -1,7 +1,6 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL A1",
-	"renamed_from": "Panchroma PLA Stain @BBL A1",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_00",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M.json

@@ -1,7 +1,6 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL A1M",
-	"renamed_from": "Panchroma PLA Stain @BBL A1M",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_02",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P.json

@@ -1,7 +1,6 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL P1P",
-	"renamed_from": "Panchroma PLA Stain @BBL P1P",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_04",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1.json

@@ -1,7 +1,6 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL X1",
-	"renamed_from": "Panchroma PLA Stain @BBL X1",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_06",

resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json

@@ -1,7 +1,6 @@
 {
 	"type": "process",
 	"name": "0.20mm Standard @BBL X1C",
-	"renamed_from": "0.20mm Bambu Support W @BBL X1C",
 	"inherits": "fdm_process_single_0.20",
 	"from": "system",
 	"setting_id": "GP004",

resources/profiles/Blocks.json

@@ -1,6 +1,6 @@
 {
 	"name": "Blocks",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Blocks configurations",
 	"machine_model_list": [

resources/profiles/Blocks/filament/Blocks Generic ABS.json

@@ -85,10 +85,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic ASA-CF.json

@@ -85,10 +85,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic ASA.json

@@ -85,10 +85,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PA-CF.json

@@ -91,10 +91,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PA.json

@@ -16,10 +16,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PC.json

@@ -16,10 +16,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PETG.json

@@ -87,14 +87,11 @@
 		"BLOCKS Pro S100 0.8 nozzle",
 		"BLOCKS Pro S100 1.0 nozzle",
 		"BLOCKS Pro S100 1.2 nozzle",
-		"BLOCKS Pro S100",
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PLA-CF.json

@@ -22,10 +22,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PLA.json

@@ -45,14 +45,11 @@
 		"BLOCKS Pro S100 0.8 nozzle",
 		"BLOCKS Pro S100 1.0 nozzle",
 		"BLOCKS Pro S100 1.2 nozzle",
-		"BLOCKS Pro S100",
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic PVA.json

@@ -16,10 +16,8 @@
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/filament/Blocks Generic TPU.json

@@ -60,14 +60,11 @@
 		"BLOCKS Pro S100 0.8 nozzle",
 		"BLOCKS Pro S100 1.0 nozzle",
 		"BLOCKS Pro S100 1.2 nozzle",
-		"BLOCKS Pro S100",
 		"BLOCKS RD50 V2 0.4 nozzle",
 		"BLOCKS RD50 V2 0.6 nozzle",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RF50 0.4 nozzle",
 		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle",
-		"BLOCKS RF50"
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "6",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "6",
 	"top_shell_layers": "6",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "5",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "5",
 	"top_shell_layers": "5",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.6 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.6 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "5",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "5",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json

@@ -14,7 +14,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "5",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "5",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "5",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "5",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.26mm Standard 0.6 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.6 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.6 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.28mm Extra Draft 0.4 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.4 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.30mm Extra Draft 0.4 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "4",
 	"layer_height": "0.30",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.4 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.3",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.8 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.30mm Optimal 1.0 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "4",
 	"layer_height": "0.30",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.0 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.30mm Standard 0.6 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.30",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.6 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.32mm Draft 0.6 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.6 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.32mm Draft 0.6 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.6 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.38mm Extra Draft 0.6 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.6 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.6 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.38mm Standard 0.8 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.8 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.40mm Draft 0.6 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "2",
 	"layer_height": "0.40",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.6 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.40mm Standard 0.8 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "4",
 	"layer_height": "0.40",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.46mm Draft 0.8 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.8 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.50mm Draft 0.8 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "4",
 	"layer_height": "0.50",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.50mm Optimal 1.2 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.50",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.2 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.50mm Standard 1.0 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.50",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.0 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.54mm Extra Draft 0.8 nozzle @Blocks_RD50_V2.json

@@ -10,7 +10,6 @@
 	"top_shell_layers": "4",
 	"top_solid_infill_flow_ratio": "0.96",
 	"compatible_printers": [
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.8 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json

@@ -10,7 +10,6 @@
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "4",
 	"compatible_printers": [
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.8 nozzle"
 	],
 	"sparse_infill_speed": "300",

resources/profiles/Blocks/process/0.60mm Draft 1.0 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.60",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.0 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.60mm Standard 1.2 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.60",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.2 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.70mm Draft 1.2 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.70",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.2 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.70mm Extra Draft 1.0 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "3",
 	"layer_height": "0.70",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.0 nozzle"
 	]
 }

resources/profiles/Blocks/process/0.80mm Extra Draft 1.2 nozzle @Blocks.json

@@ -9,7 +9,6 @@
 	"top_shell_layers": "2",
 	"layer_height": "0.80",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 1.2 nozzle"
 	]
 }

resources/profiles/Blocks/process/fdm_process_common 0.6 nozzle.json

@@ -9,11 +9,8 @@
 	"bridge_flow": "0.95",
 	"brim_width": "5",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.6 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.6 nozzle"
 	],
 	"print_sequence": "by layer",

resources/profiles/Blocks/process/fdm_process_common 0.8 nozzle.json

@@ -5,11 +5,8 @@
 	"from": "system",
 	"instantiation": "false",
 	"compatible_printers": [
-		"BLOCKS Pro S100",
 		"BLOCKS Pro S100 0.8 nozzle",
-		"BLOCKS RD50 V2",
 		"BLOCKS RD50 V2 0.8 nozzle",
-		"BLOCKS RF50",
 		"BLOCKS RF50 0.8 nozzle"
 	],
 	"sparse_infill_line_width": "0.82",

resources/profiles/Chuanying.json

@@ -1,7 +1,7 @@
 {
 	"name": "Chuanying",
 	"url": "",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Chuanying configurations",
 	"machine_model_list": [

resources/profiles/Chuanying/filament/Chuanying Generic TPU.json

@@ -19,13 +19,7 @@
 	"compatible_printers": [
 		"Chuanying X1 0.4 Nozzle",
 		"Chuanying X1 0.6 Nozzle",
-		"Chuanying X1 0.8 Nozzle",
-		"Chuanying Adventurer 5M 0.4 Nozzle",
-		"Chuanying Adventurer 5M 0.6 Nozzle",
-		"Chuanying Adventurer 5M 0.8 Nozzle",
-		"Chuanying Adventurer 5M Pro 0.4 Nozzle",
-		"Chuanying Adventurer 5M Pro 0.6 Nozzle",
-		"Chuanying Adventurer 5M Pro 0.8 Nozzle"
+		"Chuanying X1 0.8 Nozzle"
 	],
 	"compatible_printers_condition": "",
 	"compatible_prints": [],

resources/profiles/Comgrow.json

@@ -1,6 +1,6 @@
 {
 	"name": "Comgrow",
-	"version": "02.04.00.02",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "Comgrow configurations",
 	"machine_model_list": [
@@ -50,10 +50,6 @@
 			"name": "0.20mm Standard @Comgrow T500 0.6",
 			"sub_path": "process/0.20mm Standard @Comgrow T500 0.6.json"
 		},
-		{
-			"name": "0.20mm Standard @Comgrow T500 1.0",
-			"sub_path": "process/0.20mm Standard @Comgrow T500 1.0.json"
-		},
 		{
 			"name": "0.24mm Draft @Comgrow T500 0.4",
 			"sub_path": "process/0.24mm Draft @Comgrow T500 0.4.json"

resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 1.0.json

@@ -1,103 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20mm Standard @Comgrow T500 1.0",
-	"inherits": "fdm_process_comgrow_common",
-	"from": "system",
-	"setting_id": "2lOjEPJ5JELGadG3",
-	"instantiation": "true",
-	"adaptive_layer_height": "1",
-	"reduce_crossing_wall": "0",
-	"layer_height": "0.24",
-	"max_travel_detour_distance": "0",
-	"bottom_surface_pattern": "monotonic",
-	"bottom_shell_layers": "2",
-	"bottom_shell_thickness": "0",
-	"bridge_flow": "0.85",
-	"bridge_speed": "25",
-	"brim_width": "0",
-	"brim_object_gap": "0",
-	"compatible_printers_condition": "",
-	"print_sequence": "by layer",
-	"bridge_no_support": "0",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"enable_arc_fitting": "0",
-	"outer_wall_line_width": "1.0",
-	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "1.0",
-	"infill_direction": "45",
-	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "crosshatch",
-	"initial_layer_line_width": "1.0",
-	"initial_layer_print_height": "0.28",
-	"infill_combination": "0",
-	"sparse_infill_line_width": "1.0",
-	"infill_wall_overlap": "23%",
-	"interface_shells": "0",
-	"ironing_flow": "15%",
-	"ironing_spacing": "0.25",
-	"ironing_speed": "15",
-	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
-	"detect_overhang_wall": "1",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "20",
-	"overhang_3_4_speed": "15",
-	"overhang_4_4_speed": "10",
-	"inner_wall_line_width": "1.0",
-	"wall_loops": "2",
-	"print_settings_id": "",
-	"raft_layers": "0",
-	"seam_position": "aligned",
-	"skirt_distance": "3",
-	"skirt_height": "2",
-	"skirt_loops": "2",
-	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0",
-	"spiral_mode": "0",
-	"standby_temperature_delta": "-5",
-	"enable_support": "0",
-	"resolution": "0.012",
-	"support_type": "normal(auto)",
-	"support_style": "grid",
-	"support_on_build_plate_only": "0",
-	"support_top_z_distance": "0.15",
-	"support_filament": "0",
-	"support_line_width": "1.0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_filament": "0",
-	"support_interface_top_layers": "3",
-	"support_interface_bottom_layers": "-1",
-	"support_interface_spacing": "0.2",
-	"support_interface_speed": "100%",
-	"support_base_pattern": "rectilinear",
-	"support_base_pattern_spacing": "0.2",
-	"support_speed": "60",
-	"support_threshold_angle": "30",
-	"support_object_xy_distance": "60%",
-	"tree_support_branch_angle": "40",
-	"tree_support_wall_count": "0",
-	"detect_thin_wall": "1",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_line_width": "1.0",
-	"top_shell_layers": "2",
-	"top_shell_thickness": "0.8",
-	"initial_layer_speed": "25",
-	"initial_layer_infill_speed": "80",
-	"outer_wall_speed": "50",
-	"inner_wall_speed": "60",
-	"internal_solid_infill_speed": "60",
-	"top_surface_speed": "40",
-	"gap_infill_speed": "60",
-	"sparse_infill_speed": "50",
-	"travel_speed": "80",
-	"enable_prime_tower": "1",
-	"wipe_tower_no_sparse_layers": "0",
-	"prime_tower_width": "60",
-	"xy_hole_compensation": "0",
-	"xy_contour_compensation": "0",
-	"seam_gap": "5%",
-	"compatible_printers": [
-		"Comgrow T500 1.0 nozzle"
-	]
-}

resources/profiles/Creality.json

@@ -1,6 +1,6 @@
 {
 	"name": "Creality",
-	"version": "02.03.02.74",
+	"version": "02.03.02.75",
 	"force_update": "0",
 	"description": "Creality configurations",
 	"machine_model_list": [
@@ -4034,6 +4034,14 @@
 			"name": "Creality Ender-5 Max 0.4 nozzle",
 			"sub_path": "machine/Creality Ender-5 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Creality Ender-5 Max 0.6 nozzle",
+			"sub_path": "machine/Creality Ender-5 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Creality Ender-5 Max 0.8 nozzle",
+			"sub_path": "machine/Creality Ender-5 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "Creality Ender-5 Plus 0.4 nozzle",
 			"sub_path": "machine/Creality Ender-5 Plus 0.4 nozzle.json"

resources/profiles/Creality/filament/CR-PETG @Ender-5 Max-all.json

@@ -153,6 +153,7 @@
     "material_flow_dependent_temperature": "0",
     "material_flow_temp_graph": "[[3.0,220],[5.0,240],[10.0,250]]",
     "pressure_advance": "0.05",
+    "filament_id": "06101",
     "support_material_interface_fan_speed": "-1",
     "compatible_printers": [
         "Creality Ender-5 Max 0.4 nozzle",

resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json

@@ -113,6 +113,6 @@
 	"initial_layer_jerk": "7",
 	"travel_jerk": "7",
 	"compatible_printers": [
-		"Creality CR-10SE 0.2 nozzle"
+		"Creality CR-10 SE 0.2 nozzle"
 	]
 }

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json

@@ -1,7 +1,6 @@
 {
 	"type": "process",
 	"name": "0.12mm Fine @Creality Ender3V3SE 0.4",
-	"renamed_from": "0.12mm Fine @Creality Ender3V3SE",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "W68mSPdmat2rCXuD",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json

@@ -1,7 +1,6 @@
 {
 	"type": "process",
 	"name": "0.16mm Optimal @Creality Ender3V3SE 0.4",
-	"renamed_from": "0.16mm Optimal @Creality Ender3V3SE",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "jvnrh3jh6Btbs1Ja",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json

@@ -1,7 +1,6 @@
 {
 	"type": "process",
 	"name": "0.20mm Standard @Creality Ender3V3SE 0.4",
-	"renamed_from": "0.20mm Standard @Creality Ender3V3SE",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "YLkw9eyyK7cm97ek",

resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json

@@ -1,7 +1,6 @@
 {
 	"type": "process",
 	"name": "0.20mm Standard @Creality K1 SE",
-	"renamed_from": "0.20mm Fast @Creality K1 SE 0.4",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "eR9pRC1qPENNx8U9",
@@ -265,4 +264,4 @@
 	"wipe_tower_extra_spacing": "100%",
 	"wipe_tower_rotation_angle": "0",
 	"wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70"
-}
+}

resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json

@@ -1,7 +1,6 @@
 {
 	"type": "process",
 	"name": "0.24mm Draft @Creality Ender3V3SE 0.4",
-	"renamed_from": "0.24mm Draft @Creality Ender3V3SE",
 	"inherits": "fdm_process_creality_common",
 	"from": "system",
 	"setting_id": "Hg10EUNCLMEYYBN1",

resources/profiles/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json

@@ -1,7 +1,6 @@
 {
 	"type": "process",
 	"name": "0.48mm Draft @Creality K1C",
-	"renamed_from": "0.48mm Draft @Creality K1C (0.8 nozzle)",
 	"inherits": "fdm_process_common_klipper",
 	"from": "system",
 	"setting_id": "qaiff3f8gSQ1GVj1",

resources/profiles/Elegoo/filament/Generic/Generic PETG PRO @Elegoo.json

@@ -2,7 +2,6 @@
 	"type": "filament",
 	"setting_id": "pKzSR8XeyyUDbrNW",
 	"name": "Generic PETG PRO @Elegoo",
-	"renamed_from": "Elegoo Generic PETG PRO",
 	"from": "system",
 	"instantiation": "true",
 	"inherits": "Generic PETG @base",

resources/profiles/Ginger Additive/filament/Ginger Generic PETG.json

@@ -1,7 +1,6 @@
 {
 	"type": "filament",
 	"name": "Ginger Generic PETG",
-	"renamed_from": "Ginger Generic rPETG",
 	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "ue95N2e65rdp5K6c",

resources/profiles/Ginger Additive/filament/Ginger Generic PLA.json

@@ -1,7 +1,6 @@
 {
 	"type": "filament",
 	"name": "Ginger Generic PLA",
-	"renamed_from": "Ginger Generic rPLA",
 	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "Z1scjKDBFoDaTa2C",

resources/profiles/MagicMaker.json

@@ -1,6 +1,6 @@
 {
 	"name": "MagicMaker",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "MagicMaker configurations",
 	"machine_model_list": [