rms/OrcaSlicer_WIKI
1
0
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer_WIKI.git synced 2026-05-17 08:35:46 +03:00
Code Issues Packages Projects Releases Wiki Activity

Symmetric infill Y axis (#141)

Browse Source
This commit is contained in:
Ian Bassi
2026-01-21 15:08:14 -03:00
committed by GitHub
parent acda306e6e
commit 0618b8a218
4 changed files with 103 additions and 32 deletions
Download Patch File Download Diff File Expand all files Collapse all files

BIN
images/fill/symmetric_infill_y_axis.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 30 KiB

BIN
print_settings/strength/infill-analysis/infill_desc_calculator.xlsx
View File

Binary file not shown.

19
print_settings/strength/strength_settings_infill.md
View File

@@ -11,6 +11,7 @@ Infill is the internal structure of a 3D print, providing strength and support.
- [Direction and Rotation](#direction-and-rotation)
- [Direction](#direction)
- [Rotation](#rotation)
- [Symmetric infill Y axis](#symmetric-infill-y-axis)
- [Infill Wall Overlap](#infill-wall-overlap)
- [Apply gap fill](#apply-gap-fill)
- [Filter out tiny gaps](#filter-out-tiny-gaps)
@@ -93,8 +94,7 @@ This strategy improves printing times by avoiding closed loops in favor of conti
## Direction and Rotation
> [!TIP]
> You can use [Template Metalanguage for infill rotation](strength_settings_infill_rotation_template_metalanguage) to create more complex patterns.
These settings control the orientation of the sparse infill lines to optimize strength and material usage.
### Direction
@@ -130,9 +130,24 @@ Other examples:
> [!NOTE]
> If there are more layers than angles, the sequence repeats.
> [!TIP]
> You can use [Template Metalanguage for infill rotation](strength_settings_infill_rotation_template_metalanguage) to create more complex patterns.
> [!IMPORTANT]
> Not all sparse [patterns](strength_settings_patterns) support rotation.
### Symmetric infill Y axis
When enabled, the infill pattern will be mirrored along the Y-axis of the print bed. This can help achieve more uniform strength distribution in certain geometries.
> [!IMPORTANT]
> This setting may not be supported by all infill patterns.
You can apply this setting with multiple objects or using modifiers to control infill orientation for different parts of your print.
For example, you might want to mirror the infill pattern for specific components to enhance their structural integrity like planes's wings or boat hulls without the need of using 45° rotation.
![symmetric_infill_y_axis](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/fill/symmetric_infill_y_axis.png?raw=true)
## Infill Wall Overlap
Infill area is enlarged slightly to overlap with wall for better bonding. The percentage value is relative to line width of sparse infill. Set this value to ~10-15% to minimize potential over extrusion and accumulation of material resulting in rough surfaces.

116
print_settings/strength/strength_settings_patterns.md
View File

@@ -91,7 +91,9 @@ Layer time variability refers to the differences in time it takes to print each
- **Print Time:** Normal-Low ![level-to-worse-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-3.svg?raw=true)
- **Material/Time (Higher better):** Normal-High ![level-to-better-5](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-5.svg?raw=true)
- **Layer time Variability:** None
- **Multiline:** N/A
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** N/A
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** N/A
- **Applies to:**
- **[Solid Infill](strength_settings_infill#internal-solid-infill)**
- **[Surface](strength_settings_top_bottom_shells)**
@@ -110,7 +112,9 @@ Layer time variability refers to the differences in time it takes to print each
- **Print Time:** Normal-Low ![level-to-worse-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-3.svg?raw=true)
- **Material/Time (Higher better):** Normal-High ![level-to-better-5](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-5.svg?raw=true)
- **Layer time Variability:** None
- **Multiline:** N/A
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** N/A
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** N/A
- **Applies to:**
- **[Solid Infill](strength_settings_infill#internal-solid-infill)**
- **[Surface](strength_settings_top_bottom_shells)**
@@ -129,7 +133,9 @@ Parallel lines spaced according to infill density. Each layer is printed perpend
- **Print Time:** Normal-Low ![level-to-worse-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-3.svg?raw=true)
- **Material/Time (Higher better):** Normal-High ![level-to-better-5](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-5.svg?raw=true)
- **Layer time Variability:** Unnoticeable
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
- **[Solid Infill](strength_settings_infill#internal-solid-infill)**
@@ -151,7 +157,9 @@ Recommended with layer anchoring to improve not perpendicular strength.
- **Print Time:** Normal-Low ![level-to-worse-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-3.svg?raw=true)
- **Material/Time (Higher better):** Normal-High ![level-to-better-5](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-5.svg?raw=true)
- **Layer time Variability:** Unnoticeable
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
- **[Solid Infill](strength_settings_infill#internal-solid-infill)**
@@ -161,7 +169,7 @@ Recommended with layer anchoring to improve not perpendicular strength.
## Zig Zag
Similar to [rectilinear](#rectilinear) with consistent pattern between layers. Allows you to add a Symmetric infill Y axis for models with two symmetric parts.
Similar to [rectilinear](#rectilinear) with consistent pattern between layers.
- **Strength**
- **Horizontal (X-Y):** Normal-Low ![level-to-better-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-3.svg?raw=true)
@@ -171,7 +179,9 @@ Similar to [rectilinear](#rectilinear) with consistent pattern between layers. A
- **Print Time:** Normal-Low ![level-to-worse-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-3.svg?raw=true)
- **Material/Time (Higher better):** Normal-High ![level-to-better-5](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-5.svg?raw=true)
- **Layer time Variability:** Unnoticeable
- **Multiline:** No
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** No
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** Yes
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -189,7 +199,9 @@ Similar to [Zig Zag](#zig-zag) but displacing each layer with Infill shift step
- **Print Time:** Normal-Low ![level-to-worse-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-3.svg?raw=true)
- **Material/Time (Higher better):** Normal-High ![level-to-better-5](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-5.svg?raw=true)
- **Layer time Variability:** Unnoticeable
- **Multiline:** No
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** No
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** Yes
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -204,12 +216,14 @@ When using this fill, you can individually modify the density of the skeleton an
- **Horizontal (X-Y):** Normal-Low ![level-to-better-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-3.svg?raw=true)
- **Vertical (Z):** Normal-Low ![level-to-better-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-3.svg?raw=true)
- **Density Calculation:** Similar to [Zig Zag](#zig-zag).
Skin density *( Infill Area - Skin Area + lock depth area) + ( Skin density* Skin area).
Skin density * ( Infill Area - Skin Area + lock depth area) + ( Skin density * Skin area).
- **Material Usage:** Normal-High ![level-to-worse-5](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-5.svg?raw=true)
- **Print Time:** Normal-High ![level-to-worse-5](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-5.svg?raw=true)
- **Material/Time (Higher better):** Normal ![level-to-better-4](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-4.svg?raw=true)
- **Layer time Variability:** None
- **Multiline:** No
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** No
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** Yes
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -227,7 +241,9 @@ Similar to [rectilinear](#rectilinear), but each line is slightly rotated to imp
- **Print Time:** Normal-Low ![level-to-worse-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-3.svg?raw=true)
- **Material/Time (Higher better):** Normal-High ![level-to-better-5](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-5.svg?raw=true)
- **Layer time Variability:** None
- **Multiline:** No
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** No
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -245,7 +261,9 @@ Two-layer pattern of perpendicular lines, forming a grid. Overlapping points may
- **Print Time:** Low ![level-to-worse-2](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-2.svg?raw=true)
- **Material/Time (Higher better):** Normal-High ![level-to-better-5](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-5.svg?raw=true)
- **Layer time Variability:** None
- **Multiline:** [Non-Crossing](strength_settings_infill#non-crossing-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Non-Crossing](strength_settings_infill#non-crossing-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -263,7 +281,9 @@ Triangle-based grid, offering strong X-Y strength but with triple overlaps at in
- **Print Time:** Normal-Low ![level-to-worse-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-3.svg?raw=true)
- **Material/Time (Higher better):** Normal-High ![level-to-better-5](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-5.svg?raw=true)
- **Layer time Variability:** None
- **Multiline:** [Non-Crossing](strength_settings_infill#non-crossing-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Non-Crossing](strength_settings_infill#non-crossing-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -281,7 +301,9 @@ Similar to the [triangles](#triangles) pattern but offset to prevent triple over
- **Print Time:** Normal-Low ![level-to-worse-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-3.svg?raw=true)
- **Material/Time (Higher better):** Normal-High ![level-to-better-5](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-5.svg?raw=true)
- **Layer time Variability:** None
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -299,7 +321,9 @@ Similar to the [triangles](#triangles) pattern but offset to prevent triple over
- **Print Time:** Normal-Low ![level-to-worse-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-3.svg?raw=true)
- **Material/Time (Higher better):** Normal-High ![level-to-better-5](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-5.svg?raw=true)
- **Layer time Variability:** Unnoticeable
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -317,7 +341,9 @@ Similar to the [triangles](#triangles) pattern but offset to prevent triple over
- **Print Time:** Low ![level-to-worse-2](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-2.svg?raw=true)
- **Material/Time (Higher better):** Normal ![level-to-better-4](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-4.svg?raw=true)
- **Layer time Variability:** Unnoticeable
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -335,7 +361,9 @@ Similar to the [triangles](#triangles) pattern but offset to prevent triple over
- **Print Time:** Normal-Low ![level-to-worse-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-3.svg?raw=true)
- **Material/Time (Higher better):** Normal-High ![level-to-better-5](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-5.svg?raw=true)
- **Layer time Variability:** Unnoticeable
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -353,7 +381,9 @@ Support |Cubic is a variation of the [Cubic](#cubic) infill pattern that is spec
- **Print Time:** Extra-Low ![level-to-worse-1](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-1.svg?raw=true)
- **Material/Time (Higher better):** Low ![level-to-better-2](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-2.svg?raw=true)
- **Layer time Variability:** Likely Noticeable
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -371,7 +401,9 @@ Ultra-fast, ultra-low material infill. Designed for speed and efficiency, ideal
- **Print Time:** Ultra-Low ![level-to-worse-0](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-0.svg?raw=true)
- **Material/Time (Higher better):** Normal-Low ![level-to-better-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-3.svg?raw=true)
- **Layer time Variability:** Likely Noticeable
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -389,7 +421,9 @@ Hexagonal pattern balancing strength and material use. Double walls in each hexa
- **Print Time:** Ultra-High ![level-to-worse-8](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-8.svg?raw=true)
- **Material/Time (Higher better):** Low ![level-to-better-2](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-2.svg?raw=true)
- **Layer time Variability:** None
- **Multiline:** [Non-Crossing](strength_settings_infill#non-crossing-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Non-Crossing](strength_settings_infill#non-crossing-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -407,7 +441,9 @@ This infill tries to generate a printable honeycomb structure by printing square
- **Print Time:** Extra-High ![level-to-worse-7](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-7.svg?raw=true)
- **Material/Time (Higher better):** Low ![level-to-better-2](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-2.svg?raw=true)
- **Layer time Variability:** Possibly Noticeable
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -425,7 +461,9 @@ Vertical Honeycomb pattern. Acceptable torsional stiffness. Developed for low de
- **Print Time:** Normal-Low ![level-to-worse-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-3.svg?raw=true)
- **Material/Time (Higher better):** Normal-High ![level-to-better-5](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-5.svg?raw=true)
- **Layer time Variability:** Possibly Noticeable
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -443,7 +481,9 @@ Low-strength pattern with good flexibility. You can adjust **Angle 1** and **Ang
- **Print Time:** Normal-Low ![level-to-worse-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-3.svg?raw=true)
- **Material/Time (Higher better):** Normal-High ![level-to-better-5](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-5.svg?raw=true)
- **Layer time Variability:** Unnoticeable
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -462,7 +502,9 @@ Easier to slice but consider using [TPMS-D](#tpms-d) or [Gyroid](#gyroid) for be
- **Print Time:** High ![level-to-worse-6](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-6.svg?raw=true)
- **Material/Time (Higher better):** Low ![level-to-better-2](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-2.svg?raw=true)
- **Layer time Variability:** Likely Noticeable
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -480,7 +522,9 @@ Triply Periodic Minimal Surface (Schwarz Diamond). Hybrid between [Cross Hatch](
- **Print Time:** High ![level-to-worse-6](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-6.svg?raw=true)
- **Material/Time (Higher better):** Low ![level-to-better-2](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-2.svg?raw=true)
- **Layer time Variability:** Possibly Noticeable
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -498,7 +542,9 @@ Triply Periodic Minimal Surface (Fischer–Koch S) pattern. Its smooth, continuo
- **Print Time:** Ultra-High ![level-to-worse-8](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-8.svg?raw=true)
- **Material/Time (Higher better):** Low ![level-to-better-2](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-2.svg?raw=true)
- **Layer time Variability:** Possibly Noticeable
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -516,7 +562,9 @@ Mathematical, isotropic surface providing equal strength in all directions. Exce
- **Print Time:** Ultra-High ![level-to-worse-8](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-8.svg?raw=true)
- **Material/Time (Higher better):** Low ![level-to-better-2](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-2.svg?raw=true)
- **Layer time Variability:** Unnoticeable
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
@@ -534,7 +582,9 @@ Fills the area with progressively smaller versions of the outer contour, creatin
- **Print Time:** Normal-Low ![level-to-worse-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-3.svg?raw=true)
- **Material/Time (Higher better):** Normal-High ![level-to-better-5](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-5.svg?raw=true)
- **Layer time Variability:** None
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
- **[Solid Infill](strength_settings_infill#internal-solid-infill)**
@@ -556,7 +606,9 @@ Print speed is very low due to the complexity of the path, which can lead to lon
- **Print Time:** Extra-High ![level-to-worse-7](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-7.svg?raw=true)
- **Material/Time (Higher better):** Low ![level-to-better-2](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-2.svg?raw=true)
- **Layer time Variability:** None
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
- **[Solid Infill](strength_settings_infill#internal-solid-infill)**
@@ -576,7 +628,9 @@ Spiral pattern that fills the area with concentric arcs, creating a smooth and c
- **Print Time:** Normal-Low ![level-to-worse-3](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-3.svg?raw=true)
- **Material/Time (Higher better):** Normal-High ![level-to-better-5](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-5.svg?raw=true)
- **Layer time Variability:** None
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
- **[Solid Infill](strength_settings_infill#internal-solid-infill)**
@@ -596,7 +650,9 @@ Aesthetic pattern with low strength and high print time.
- **Print Time:** Normal ![level-to-worse-4](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-worse-4.svg?raw=true)
- **Material/Time (Higher better):** Normal ![level-to-better-4](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/images/misc/level-to-better-4.svg?raw=true)
- **Layer time Variability:** None
- **Multiline:** [Classic](strength_settings_infill#classic-strategy)
- **Extra:**
- **[Multiline](strength_settings_infill#fill-multiline):** [Classic](strength_settings_infill#classic-strategy)
- **[Symmetric infill Y axis](strength_settings_infill#symmetric-infill-y-axis):** No
- **Applies to:**
- **[Sparse Infill](strength_settings_infill#sparse-infill-density)**
- **[Solid Infill](strength_settings_infill#internal-solid-infill)**