vendor: run make vendor-update

### Describe Your Changes

As mentioned in https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6603, some hyperlinks under `vmalert` -> `System`
section is not working as expected.

Pages and redirection:
- For page `http://127.0.0.1:8880/`: `flags` button will redirect to
`http://127.0.0.1:8880/flags`
- For page `http://127.0.0.1:8880/vmalert`:
`http://127.0.0.1:8880/flags`
- For page `http://127.0.0.1:8880/vmalert/`:
`http://127.0.0.1:8880/vmalert/flags` (page not exists)
- Similar redirection could be observed with `-http.pathPrefix`

Two potential ways to avoid 404 redirection:
1. **avoid visiting `/vmalert/`** (I'm trying to do this).
2. provide support for `/vmalert/flags`.

`/vmalert/` could be visit only when user click other navigator (e.g.
Group) and click vmalert again:
![Peek 2024-07-10
10-07](https://github.com/VictoriaMetrics/VictoriaMetrics/assets/30280396/13d7b147-a1b6-4e93-9ee0-26f881a16bef)
Because: `http://127.0.0.1:8880/vmalert/groups?search=` + `<a
class="nav-link" href=".">` = `http://127.0.0.1:8880/vmalert/`

So I'm trying to change the `href="."` to `href="../vmalert"`.

### Checklist

The following checks are **mandatory**:

- [X] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).

(cherry picked from commit cadf1eb5ab)
Signed-off-by: hagen1778 <roman@victoriametrics.com>

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -6,9 +6,9 @@ body:
     attributes:
       value: |
         Before filling a bug report it would be great to [upgrade](https://docs.victoriametrics.com/#how-to-upgrade) 
-        to [the latest available release](https://github.com/VictoriaMetrics/VictoriaMetrics/releases/latest)
+        to [the latest available release](https://github.com/VictoriaMetrics/VictoriaMetrics/releases)
         and verify whether the bug is reproducible there.
-        It's also recommended to read the [troubleshooting docs](https://docs.victoriametrics.com/troubleshooting/) first.
+        It's also recommended to read the [troubleshooting docs](https://docs.victoriametrics.com/Troubleshooting.html) first.
   - type: textarea
     id: describe-the-bug
     attributes:
@@ -60,12 +60,12 @@ body:
   
         For VictoriaMetrics health-state issues please provide full-length screenshots
         of Grafana dashboards if possible:
-          * [Grafana dashboard for single-node VictoriaMetrics](https://grafana.com/grafana/dashboards/10229/)
-          * [Grafana dashboard for VictoriaMetrics cluster](https://grafana.com/grafana/dashboards/11176/)
+          * [Grafana dashboard for single-node VictoriaMetrics](https://grafana.com/grafana/dashboards/10229-victoriametrics/)
+          * [Grafana dashboard for VictoriaMetrics cluster](https://grafana.com/grafana/dashboards/11176-victoriametrics-cluster/)
         
         See how to setup monitoring here:
           * [monitoring for single-node VictoriaMetrics](https://docs.victoriametrics.com/#monitoring)
-          * [monitoring for VictoriaMetrics cluster](https://docs.victoriametrics.com/cluster-victoriametrics/#monitoring)
+          * [monitoring for VictoriaMetrics cluster](https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html#monitoring)
     validations:
       required: false
   - type: textarea

.github/ISSUE_TEMPLATE/question.yml

@@ -24,9 +24,9 @@ body:
       label: Troubleshooting docs
       description: I am familiar with the following troubleshooting docs
       options:
-        - label: General - https://docs.victoriametrics.com/troubleshooting/
+        - label: General - https://docs.victoriametrics.com/Troubleshooting.html
           required: false
-        - label: vmagent - https://docs.victoriametrics.com/vmagent/#troubleshooting
-          required: false
-        - label: vmalert - https://docs.victoriametrics.com/vmalert/#troubleshooting
+        - label: vmagent - https://docs.victoriametrics.com/vmagent.html#troubleshooting
           required: false
+        - label: vmalert - https://docs.victoriametrics.com/vmalert.html#troubleshooting
+          required: false

.github/pull_request_template.md

@@ -1,9 +0,0 @@
-### Describe Your Changes
-
-Please provide a brief description of the changes you made. Be as specific as possible to help others understand the purpose and impact of your modifications.
-
-### Checklist
-
-The following checks are **mandatory**:
-
-- [ ] My change adheres [VictoriaMetrics contributing guidelines](https://docs.victoriametrics.com/contributing/).

.github/workflows/build.yml

@@ -1,54 +0,0 @@
-name: build
-
-on:
-  push:
-    branches:
-      - cluster
-      - master
-    paths:
-      - '**.go'
-      - '**/Dockerfile*' # The trailing * is for app/vmui/Dockerfile-*.
-      - '**/Makefile'
-  pull_request:
-    branches:
-      - cluster
-      - master
-    paths:
-      - '**.go'
-      - '**/Dockerfile*' # The trailing * is for app/vmui/Dockerfile-*.
-      - '**/Makefile'
-
-permissions:
-  contents: read
-
-concurrency:
-  cancel-in-progress: true
-  group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
-
-jobs:
-  build:
-    name: Build
-    runs-on: ubuntu-latest
-    steps:
-      - name: Code checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Go
-        id: go
-        uses: actions/setup-go@v5
-        with:
-          go-version: stable
-          cache: false
-
-      - name: Cache Go artifacts
-        uses: actions/cache@v4
-        with:
-          path: |
-            ~/.cache/go-build
-            ~/go/bin
-            ~/go/pkg/mod
-          key: go-artifacts-${{ runner.os }}-crossbuild-${{ steps.go.outputs.go-version }}-${{ hashFiles('go.sum', 'Makefile', 'app/**/Makefile') }}
-          restore-keys: go-artifacts-${{ runner.os }}-crossbuild-
-
-      - name: Run crossbuild
-        run: make crossbuild

.github/workflows/check-licenses.yml

@@ -14,25 +14,13 @@ jobs:
     name: Build
     runs-on: ubuntu-latest
     steps:
-      - name: Code checkout
-        uses: actions/checkout@master
-
       - name: Setup Go
-        id: go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@main
         with:
           go-version: stable
-          cache: false
-
-      - name: Cache Go artifacts
-        uses: actions/cache@v4
-        with:
-          path: |
-            ~/.cache/go-build
-            ~/go/pkg/mod
-            ~/go/bin
-          key: go-artifacts-${{ runner.os }}-check-licenses-${{ steps.go.outputs.go-version }}-${{ hashFiles('go.sum', 'Makefile', 'app/**/Makefile') }}
-          restore-keys: go-artifacts-${{ runner.os }}-check-licenses-
-
+        id: go
+      - name: Code checkout
+        uses: actions/checkout@master
       - name: Check License
-        run: make check-licenses
+        run: |
+          make check-licenses

.github/workflows/codeql-analysis-go.yml

@@ -1,62 +0,0 @@
-name: 'CodeQL Go'
-
-on:
-  push:
-    branches:
-      - cluster
-      - master
-    paths:
-      - '**.go'
-  pull_request:
-    branches:
-      - cluster
-      - master
-    paths:
-      - '**.go'
-
-concurrency:
-  cancel-in-progress: true
-  group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
-
-jobs:
-  analyze:
-    name: Analyze
-    runs-on: ubuntu-latest
-    permissions:
-      actions: read
-      contents: read
-      security-events: write
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-
-      - name: Set up Go
-        id: go
-        uses: actions/setup-go@v5
-        with:
-          cache: false
-          go-version: stable
-
-      - name: Cache Go artifacts
-        uses: actions/cache@v4
-        with:
-          path: |
-            ~/.cache/go-build
-            ~/go/bin
-            ~/go/pkg/mod
-          key: go-artifacts-${{ runner.os }}-codeql-analyze-${{ steps.go.outputs.go-version }}-${{ hashFiles('go.sum', 'Makefile', 'app/**/Makefile') }}
-          restore-keys: go-artifacts-${{ runner.os }}-codeql-analyze-
-
-      - name: Initialize CodeQL
-        uses: github/codeql-action/init@v3
-        with:
-          languages: go
-
-      - name: Autobuild
-        uses: github/codeql-action/autobuild@v3
-
-      - name: Perform CodeQL Analysis
-        uses: github/codeql-action/analyze@v3
-        with:
-          category: 'language:go'

.github/workflows/codeql-analysis-js-ts.yml

@@ -1,46 +0,0 @@
-name: 'CodeQL JS/TS'
-
-on:
-  push:
-    branches:
-      - cluster
-      - master
-    paths:
-      - '**.js'
-      - '**.ts'
-      - '**.tsx'
-  pull_request:
-    branches:
-      - cluster
-      - master
-    paths:
-      - '**.js'
-      - '**.ts'
-      - '**.tsx'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
-  cancel-in-progress: true
-
-jobs:
-  analyze:
-    name: Analyze
-    runs-on: ubuntu-latest
-    permissions:
-      actions: read
-      contents: read
-      security-events: write
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-
-      - name: Initialize CodeQL
-        uses: github/codeql-action/init@v3
-        with:
-          languages: javascript-typescript
-
-      - name: Perform CodeQL Analysis
-        uses: github/codeql-action/analyze@v3
-        with:
-          category: 'language:js/ts'

.github/workflows/codeql-analysis-js.yml

@@ -0,0 +1,46 @@
+name: "CodeQL - JS"
+
+on:
+  push:
+    branches: [master, cluster]
+    paths:
+      - "**.js"
+  pull_request:
+    # The branches below must be a subset of the branches above
+    branches: [master, cluster]
+    paths:
+      - "**.js"
+  schedule:
+    - cron: "30 18 * * 2"
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
+  cancel-in-progress: true
+  
+jobs:
+  analyze:
+    name: Analyze
+    runs-on: ubuntu-latest
+    permissions:
+      actions: read
+      contents: read
+      security-events: write
+
+    strategy:
+      fail-fast: false
+      matrix:
+        language: ["javascript"]
+
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v3
+
+      - name: Initialize CodeQL
+        uses: github/codeql-action/init@v2
+        with:
+          languages: ${{ matrix.language }}
+
+      - name: Perform CodeQL Analysis
+        uses: github/codeql-action/analyze@v2
+        with:
+          category: "javascript"

.github/workflows/codeql-analysis.yml

@@ -0,0 +1,92 @@
+# For most projects, this workflow file will not need changing; you simply need
+# to commit it to your repository.
+#
+# You may wish to alter this file to override the set of languages analyzed,
+# or to provide custom queries or build logic.
+#
+# ******** NOTE ********
+# We have attempted to detect the languages in your repository. Please check
+# the `language` matrix defined below to confirm you have the correct set of
+# supported CodeQL languages.
+#
+name: "CodeQL"
+
+on:
+  push:
+    branches: [master, cluster]
+    paths-ignore:
+      - "docs/**"
+      - "**.md"
+      - "**.txt"
+      - "**.js"
+  pull_request:
+    # The branches below must be a subset of the branches above
+    branches: [master, cluster]
+    paths-ignore:
+      - "docs/**"
+      - "**.md"
+      - "**.txt"
+      - "**.js"
+  schedule:
+    - cron: "30 18 * * 2"
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  analyze:
+    name: Analyze
+    runs-on: ubuntu-latest
+    permissions:
+      actions: read
+      contents: read
+      security-events: write
+
+    strategy:
+      fail-fast: false
+      matrix:
+        language: ["go"]
+        # CodeQL supports [ 'cpp', 'csharp', 'go', 'java', 'javascript', 'python', 'ruby' ]
+        # Learn more about CodeQL language support at https://git.io/codeql-language-support
+
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v3
+
+      - name: Set up Go
+        uses: actions/setup-go@v4
+        with:
+          go-version: stable
+          check-latest: true
+          cache: true
+        if: ${{ matrix.language == 'go' }}
+
+      # Initializes the CodeQL tools for scanning.
+      - name: Initialize CodeQL
+        uses: github/codeql-action/init@v2
+        with:
+          languages: ${{ matrix.language }}
+          # If you wish to specify custom queries, you can do so here or in a config file.
+          # By default, queries listed here will override any specified in a config file.
+          # Prefix the list here with "+" to use these queries and those in the config file.
+          # queries: ./path/to/local/query, your-org/your-repo/queries@main
+
+      # Autobuild attempts to build any compiled languages  (C/C++, C#, or Java).
+      # If this step fails, then you should remove it and run the build manually (see below)
+      - name: Autobuild
+        uses: github/codeql-action/autobuild@v2
+
+      # ℹ️ Command-line programs to run using the OS shell.
+      # 📚 https://git.io/JvXDl
+
+      # ✏️ If the Autobuild fails above, remove it and uncomment the following three lines
+      #    and modify them (or add more) to build your code if your project
+      #    uses a compiled language
+
+      #- run: |
+      #   make bootstrap
+      #   make release
+
+      - name: Perform CodeQL Analysis
+        uses: github/codeql-action/analyze@v2

.github/workflows/main.yml

@@ -1,25 +1,25 @@
 name: main
-
 on:
   push:
     branches:
-      - cluster
       - master
-    paths:
-      - '**.go'
+      - cluster
+    paths-ignore:
+      - "docs/**"
+      - "**.md"
   pull_request:
     branches:
-      - cluster
       - master
-    paths:
-      - '**.go'
-
+      - cluster
+    paths-ignore:
+      - "docs/**"
+      - "**.md"
 permissions:
   contents: read
 
 concurrency:
-  cancel-in-progress: true
   group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
+  cancel-in-progress: true
 
 jobs:
   lint:
@@ -27,67 +27,70 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Code checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
 
       - name: Setup Go
-        id: go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@v4
         with:
-          cache: false
           go-version: stable
+          check-latest: true
+          cache: true
 
-      - name: Cache Go artifacts
-        uses: actions/cache@v4
-        with:
-          path: |
-            ~/.cache/go-build
-            ~/go/bin
-            ~/go/pkg/mod
-          key: go-artifacts-${{ runner.os }}-check-all-${{ steps.go.outputs.go-version }}-${{ hashFiles('go.sum', 'Makefile', 'app/**/Makefile') }}
-          restore-keys: go-artifacts-${{ runner.os }}-check-all-
-
-      - name: Run check-all
+      - name: Dependencies
         run: |
+          make install-golangci-lint
           make check-all
           git diff --exit-code
 
   test:
-    name: test
     needs: lint
-    runs-on: ubuntu-latest
-
     strategy:
       matrix:
-        scenario:
-          - 'test-full'
-          - 'test-full-386'
-          - 'test-pure'
-
+        scenario: ["test-full", "test-pure", "test-full-386"]
+    name: test
+    runs-on: ubuntu-latest
     steps:
       - name: Code checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
+
+      - name: Setup Go
+        uses: actions/setup-go@v4
+        with:
+          go-version: stable
+          check-latest: true
+          cache: true
+
+      - name: run tests
+        run: |
+          make ${{ matrix.scenario}}
+
+      - name: Publish coverage
+        uses: codecov/codecov-action@v3
+        with:
+          file: ./coverage.txt
+
+  build:
+    needs: test
+    name: build
+    runs-on: ubuntu-latest
+    steps:
+      - name: Code checkout
+        uses: actions/checkout@v3
 
       - name: Setup Go
         id: go
-        uses: actions/setup-go@v5
+        uses: actions/setup-go@v4
         with:
-          cache: false
           go-version: stable
+          check-latest: true
+          cache: true
 
-      - name: Cache Go artifacts
-        uses: actions/cache@v4
+      - uses: actions/cache@v3
         with:
-          path: |
-            ~/.cache/go-build
-            ~/go/bin
-            ~/go/pkg/mod
-          key: go-artifacts-${{ runner.os }}-${{ matrix.scenario }}-${{ steps.go.outputs.go-version }}-${{ hashFiles('go.sum', 'Makefile', 'app/**/Makefile') }}
-          restore-keys: go-artifacts-${{ runner.os }}-${{ matrix.scenario }}-
+          path: gocache-for-docker
+          key:  gocache-docker-${{ runner.os }}-${{ steps.go.outputs.go-version }}-${{ hashFiles('go.mod') }}
 
-      - name: Run tests
-        run: make ${{ matrix.scenario}}
-
-      - name: Publish coverage
-        uses: codecov/codecov-action@v4
-        with:
-          file: ./coverage.txt
+      - name: Build
+        run: |
+          make victoria-metrics-crossbuild
+          make vmuitils-crossbuild

.github/workflows/sync-docs.yml

@@ -15,17 +15,18 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Code checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
         with:
           path: main
       - name: Checkout private code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
         with:
           repository: VictoriaMetrics/vmdocs
           token: ${{ secrets.VM_BOT_GH_TOKEN }}
           path: docs
+
       - name: Import GPG key
-        uses: crazy-max/ghaction-import-gpg@v6
+        uses: crazy-max/ghaction-import-gpg@v5
         with:
           gpg_private_key: ${{ secrets.VM_BOT_GPG_PRIVATE_KEY }}
           passphrase: ${{ secrets.VM_BOT_PASSPHRASE }}
@@ -38,6 +39,7 @@ jobs:
           calculatedSha=$(git rev-parse --short ${{ github.sha }})
           echo "short_sha=$calculatedSha" >> $GITHUB_OUTPUT
         working-directory: main
+
       - name: update code and commit
         run: |
           rm -rf content

.github/workflows/test_package.yml

@@ -1,59 +0,0 @@
-name: Package tests
-
-on:
-  push:
-    branches:
-      - cluster
-      - master
-    paths:
-      - '.github/workflows/test_package.yml'
-      - '**/Dockerfile*'
-      - '**/Makefile'
-  pull_request:
-    branches:
-      - cluster
-      - master
-    paths:
-      - '.github/workflows/test_package.yml'
-      - '**/Dockerfile*'
-      - '**/Makefile'
-
-permissions:
-  contents: read
-
-concurrency:
-  cancel-in-progress: true
-  group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
-
-jobs:
-  test_release:
-    name: Test Release
-    runs-on: ubuntu-latest
-    steps:
-      - name: Code checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Go
-        id: go
-        uses: actions/setup-go@v5
-        with:
-          go-version: stable
-          cache: false
-
-      - name: Cache Go artifacts
-        uses: actions/cache@v4
-        with:
-          path: |
-            ~/.cache/go-build
-            ~/go/bin
-            ~/go/pkg/mod
-          key: go-artifacts-${{ runner.os }}-test-release-${{ steps.go.outputs.go-version }}-${{ hashFiles('Makefile', '**/Dockerfile*', '**/Makefile') }}
-          restore-keys: go-artifacts-${{ runner.os }}-test-release-
-
-      - name: Run make release
-        run: |
-          make clean
-          make release
-
-      - name: Run release tests
-        run: make test-release-victoria-metrics

.github/workflows/update-sandbox.yml

@@ -0,0 +1,80 @@
+name: sandbox-release
+on:
+  release:
+    types: [published]
+permissions:
+  contents: write
+jobs:
+  deploy-sandbox:
+    runs-on: ubuntu-latest
+    steps:
+      - name: check inputs
+        if: github.event.release.tag_name == ''
+        run: exit 1
+    
+      - name: Check out code
+        uses: actions/checkout@v3
+        with:
+          repository: VictoriaMetrics/ops
+          token: ${{ secrets.VM_BOT_GH_TOKEN }}
+
+      - name: Import GPG key
+        id: import-gpg
+        uses: crazy-max/ghaction-import-gpg@v5
+        with:
+          gpg_private_key: ${{ secrets.VM_BOT_GPG_PRIVATE_KEY }}
+          passphrase: ${{ secrets.VM_BOT_PASSPHRASE }}
+          git_user_signingkey: true
+          git_commit_gpgsign: true
+
+      - name: update image tag
+        uses: fjogeleit/yaml-update-action@main
+        with:
+          valueFile: 'gcp-test/sandbox/manifests/benchmark-vm/vmcluster.yaml'
+          commitChange: false
+          createPR: false
+          changes: |
+            {
+              "gcp-test/sandbox/manifests/benchmark-vm/vmcluster.yaml": {
+                "spec.vminsert.image.tag": "${{ github.event.release.tag_name }}-enterprise-cluster",
+                "spec.vmselect.image.tag": "${{ github.event.release.tag_name }}-enterprise-cluster",
+                "spec.vmstorage.image.tag": "${{ github.event.release.tag_name }}-enterprise-cluster"
+              },
+              "gcp-test/sandbox/manifests/benchmark-vm/vmsingle.yaml": {
+                "spec.image.tag": "${{ github.event.release.tag_name }}-enterprise"
+              },
+              "gcp-test/sandbox/manifests/monitoring/monitoring-vmagent.yaml": {
+                "spec.image.tag": "${{ github.event.release.tag_name }}"
+              },
+              "gcp-test/sandbox/manifests/monitoring/monitoring-vmcluster.yaml": {
+                "spec.vminsert.image.tag": "${{ github.event.release.tag_name }}-enterprise-cluster",
+                "spec.vmselect.image.tag": "${{ github.event.release.tag_name }}-enterprise-cluster",
+                "spec.vmstorage.image.tag": "${{ github.event.release.tag_name }}-enterprise-cluster"
+              },
+              "gcp-test/sandbox/manifests/monitoring/vmalert.yaml": {
+                "spec.image.tag": "${{ github.event.release.tag_name }}-enterprise"
+              }
+            }
+
+      - name: commit changes
+        run: |
+          git config --global user.name "${{ steps.import-gpg.outputs.email }}"
+          git config --global user.email "${{ steps.import-gpg.outputs.email }}"
+          git add .
+          git commit -S -m "Deploy image tag ${RELEASE_TAG} to sandbox"
+        env:
+          RELEASE_TAG: ${{ github.event.release.tag_name }}
+
+      - name: Create Pull Request
+        uses: peter-evans/create-pull-request@v5
+        with:
+          author: ${{ github.actor }} <${{ github.actor }}@users.noreply.github.com>
+          branch: release-automation
+          token: ${{ secrets.VM_BOT_GH_TOKEN }}
+          delete-branch: true
+          title: "release ${{ github.event.release.tag_name }}"
+          body: |
+            Release [${{ github.event.release.tag_name }}](https://github.com/VictoriaMetrics/VictoriaMetrics/releases/tag/${{ github.event.release.tag_name }}) to sandbox
+        
+            > Auto-generated by `Github Actions Bot`
+    

.github/workflows/wiki.yml

@@ -0,0 +1,33 @@
+name: wiki
+on:
+  push:
+    paths:
+      - 'docs/*'
+    branches:
+      - master
+permissions:
+  contents: read
+
+jobs:
+  build:
+    permissions:
+      contents: write  # for Git to git push
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@master
+      - name: publish
+        shell: bash
+        env:
+          TOKEN: ${{secrets.CI_TOKEN}}
+        run: |
+          git clone https://vika:${TOKEN}@github.com/VictoriaMetrics/VictoriaMetrics.wiki.git wiki
+          cp -r docs/* wiki
+          cd wiki
+          git config --local user.email "info@victoriametrics.com"
+          git config --local user.name "Vika"
+          git add .
+          git commit -m "update wiki pages"
+          remote_repo="https://vika:${TOKEN}@github.com/VictoriaMetrics/VictoriaMetrics.wiki.git"
+          git push "${remote_repo}"
+          cd ..
+          rm -rf wiki

.gitignore

@@ -22,6 +22,3 @@ Gemfile.lock
 /_site
 _site
 *.tmp
-/docs/.jekyll-metadata
-coverage.txt
-cspell.json

.golangci.yml

@@ -16,7 +16,4 @@ issues:
 
 linters-settings:
   errcheck:
-    exclude-functions:
-      - "fmt.Fprintf"
-      - "fmt.Fprint"
-      - "(net/http.ResponseWriter).Write"
+    exclude: ./errcheck_excludes.txt

CODE_OF_CONDUCT_RU.md

@@ -0,0 +1,120 @@
+
+# Кодекс Поведения участника
+
+## Наши обязательства
+
+Мы, как участники, авторы и лидеры обязуемся сделать участие в сообществе
+свободным от притеснений для всех, независимо от возраста, телосложения,
+видимых или невидимых ограничений способности, этнической принадлежности,
+половых признаков, гендерной идентичности и выражения, уровня опыта,
+образования, социо-экономического статуса, национальности, внешности,
+расы, религии, или сексуальной идентичности и ориентации.
+
+Мы обещаем действовать и взаимодействовать таким образом, чтобы вносить вклад в открытое,
+дружелюбное, многообразное, инклюзивное и здоровое сообщество.
+
+## Наши стандарты
+
+Примеры поведения, создающие условия для благоприятных взаимоотношений включают в себя:
+
+* Проявление доброты и эмпатии к другим участникам проекта
+* Уважение к чужой точке зрения и опыту
+* Конструктивная критика и принятие конструктивной критики
+* Принятие ответственности, принесение извинений тем, кто пострадал от наших ошибок
+  и извлечение уроков из опыта
+* Ориентирование на то, что лучше подходит для сообщества, а не только для нас лично
+
+Примеры неприемлемого поведения участников включают в себя:
+
+* Использование выражений или изображений сексуального характера и нежелательное сексуальное внимание или домогательство в любой форме
+* Троллинг, оскорбительные или уничижительные комментарии, переход на личности или затрагивание политических убеждений
+* Публичное или приватное домогательство
+* Публикация личной информации других лиц, например, физического или электронного адреса, без явного разрешения
+* Иное поведение, которое обоснованно считать неуместным в профессиональной обстановке
+
+## Обязанности
+
+Лидеры сообщества отвечают за разъяснение и применение наших стандартов приемлемого
+поведения и будут предпринимать соответствующие и честные меры по исправлению положения
+в ответ на любое поведение, которое они сочтут неприемлемым, угрожающим, оскорбительным или вредным.
+
+Лидеры сообщества обладают правом и обязанностью удалять, редактировать или отклонять
+комментарии, коммиты, код, изменения в вики, вопросы и другой вклад, который не совпадает
+с Кодексом Поведения, и предоставят причины принятого решения, когда сочтут нужным.
+
+## Область применения
+
+Данный Кодекс Поведения применим во всех во всех публичных физических и цифровых пространства сообщества,
+а также когда человек официально представляет сообщество в публичных местах.
+Примеры представления проекта или сообщества включают использование официальной электронной почты,
+публикации в официальном аккаунте в социальных сетях,
+или упоминания как представителя в онлайн или оффлайн мероприятии.
+
+## Приведение в исполнение
+
+О случаях домогательства, а так же оскорбительного или иного другого неприемлемого
+поведения можно сообщить ответственным лидерам сообщества с помощью письма на info@victoriametrics.com
+Все жалобы будут рассмотрены и расследованы оперативно и беспристрастно.
+
+Все лидеры сообщества обязаны уважать неприкосновенность частной жизни и личную
+неприкосновенность автора сообщения.
+
+## Руководство по исполнению
+
+Лидеры сообщества будут следовать следующим Принципам Воздействия в Сообществе,
+чтобы определить последствия для тех, кого они считают виновными в нарушении данного Кодекса Поведения:
+
+### 1. Исправление
+
+**Общественное влияние**: Использование недопустимой лексики или другое поведение,
+считающиеся непрофессиональным или нежелательным в сообществе.
+
+**Последствия**: Личное, письменное предупреждение от лидеров сообщества,
+объясняющее суть нарушения и почему такое поведение
+было неуместно. Лидеры сообщества могут попросить принести публичное извинение.
+
+### 2. Предупреждение
+
+**Общественное влияние**: Нарушение в результате одного инцидента или серии действий.
+
+**Последствия**: Предупреждение о последствиях в случае продолжающегося неуместного поведения.
+На определенное время не допускается взаимодействие с людьми, вовлеченными в инцидент,
+включая незапрошенное взаимодействие
+с теми, кто обеспечивает соблюдение Кодекса. Это включает в себя избегание взаимодействия
+в публичных пространствах, а так же во внешних каналах,
+таких как социальные сети. Нарушение этих правил влечет за собой временный или вечный бан.
+
+### 3. Временный бан
+
+**Общественное влияние**: Серьёзное нарушение стандартов сообщества,
+включая продолжительное неуместное поведение.
+
+**Последствия**: Временный запрет (бан) на любое взаимодействие
+или публичное общение с сообществом на определенный период времени.
+На этот период не допускается публичное или личное взаимодействие с людьми,
+вовлеченными в инцидент, включая незапрошенное взаимодействие
+с теми, кто обеспечивает соблюдение Кодекса.
+Нарушение этих правил влечет за собой вечный бан.
+
+### 4. Вечный бан
+
+**Общественное влияние**: Демонстрация систематических нарушений стандартов сообщества,
+включая продолжающееся неуместное поведение, домогательство до отдельных лиц,
+или проявление агрессии либо пренебрежительного отношения к категориям лиц.
+
+**Последствия**: Вечный запрет на любое публичное взаимодействие с сообществом.
+
+## Атрибуция
+
+Данный Кодекс Поведения основан на [Кодекс Поведения участника][homepage],
+версии 2.0, доступной по адресу
+<https://www.contributor-covenant.org/version/2/0/code_of_conduct.html>.
+
+Принципы Воздействия в Сообществе были вдохновлены [Mozilla's code of conduct
+enforcement ladder](https://github.com/mozilla/diversity).
+
+[homepage]: https://www.contributor-covenant.org
+
+Ответы на общие вопросы о данном кодексе поведения ищите на странице FAQ:
+<https://www.contributor-covenant.org/faq>. Переводы доступны по адресу
+<https://www.contributor-covenant.org/translations>.

CONTRIBUTING.md

@@ -1 +1,16 @@
-The document has been moved [here](https://docs.victoriametrics.com/contributing/).
+If you like VictoriaMetrics and want to contribute, then we need the following:
+
+- Filing issues and feature requests [here](https://github.com/VictoriaMetrics/VictoriaMetrics/issues).
+- Spreading a word about VictoriaMetrics: conference talks, articles, comments, experience sharing with colleagues.
+- Updating documentation.
+
+We are open to third-party pull requests provided they follow [KISS design principle](https://en.wikipedia.org/wiki/KISS_principle):
+
+- Prefer simple code and architecture.
+- Avoid complex abstractions.
+- Avoid magic code and fancy algorithms.
+- Avoid [big external dependencies](https://medium.com/@valyala/stripping-dependency-bloat-in-victoriametrics-docker-image-983fb5912b0d).
+- Minimize the number of moving parts in the distributed system.
+- Avoid automated decisions, which may hurt cluster availability, consistency or performance.
+
+Adhering `KISS` principle simplifies the resulting code and architecture, so it can be reviewed, understood and verified by many people.

Makefile

@@ -1,7 +1,5 @@
 PKG_PREFIX := github.com/VictoriaMetrics/VictoriaMetrics
 
-MAKE_CONCURRENCY ?= $(shell getconf _NPROCESSORS_ONLN)
-MAKE_PARALLEL := $(MAKE) -j $(MAKE_CONCURRENCY)
 DATEINFO_TAG ?= $(shell date -u +'%Y%m%d-%H%M%S')
 BUILDINFO_TAG ?= $(shell echo $$(git describe --long --all | tr '/' '-')$$( \
 	      git diff-index --quiet HEAD -- || echo '-dirty-'$$(git diff-index -u HEAD | openssl sha1 | cut -d' ' -f2 | cut -c 1-8)))
@@ -14,92 +12,18 @@ endif
 
 GO_BUILDINFO = -X '$(PKG_PREFIX)/lib/buildinfo.Version=$(APP_NAME)-$(DATEINFO_TAG)-$(BUILDINFO_TAG)'
 
-VICTORIA_LOGS_COMPONENTS = victoria-logs
-VICTORIA_METRICS_COMPONENTS = victoria-metrics
-VICTORIA_METRICS_UTILS_COMPONENTS = vmagent vmalert vmalert-tool vmauth vmbackup vmrestore vmctl
-
 .PHONY: $(MAKECMDGOALS)
 
 include app/*/Makefile
-include cspell/Makefile
-include docs/Makefile
 include deployment/*/Makefile
-include dashboards/Makefile
+include snap/local/Makefile
 include package/release/Makefile
 
-define RELEASE_GOOS_GOARCH
-	$(eval PKG_NAME := $(1))
-	$(eval PKG_COMPONENTS := $(2))
-
-	# Build
-	$(foreach pkg_component, $(PKG_COMPONENTS), $(MAKE) $(pkg_component)-$(GOOS)-$(GOARCH)-prod)
-
-	# Generate SBOM
-	mkdir -p "bin/$(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_bom"
-	$(foreach pkg_component, $(PKG_COMPONENTS),
-		cyclonedx-gomod app -assert-licenses -json -licenses -packages \
-			-main app/$(pkg_component) \
-			-output bin/$(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_bom/$(pkg_component)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_bom.json)
-	
-	# Pack and compress
-	$(foreach pkg_component, $(PKG_COMPONENTS),
-		cd bin && tar --transform="flags=r;s|-$(GOOS)-$(GOARCH)||" -rf $(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG).tar \
-			$(pkg_component)-$(GOOS)-$(GOARCH)-prod)
-	cd bin && gzip $(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG).tar
-	cd bin && tar -czf $(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_bom.tar.gz $(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_bom
-
-	# Generate checksums
-	cd bin && \
-		sha256sum $(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG).tar.gz > $(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_checksums.txt && \
-		sha256sum $(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_bom.tar.gz >> $(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_checksums.txt
-	$(foreach pkg_component, $(PKG_COMPONENTS),
-		cd bin && sha256sum $(pkg_component)-$(GOOS)-$(GOARCH)-prod | sed s/-$(GOOS)-$(GOARCH)-prod/-prod/ >> \
-			$(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_checksums.txt)
-
-	# Clean up
-	cd bin && rm -rf $(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_bom
-	$(foreach pkg_component, $(PKG_COMPONENTS), cd bin && rm -f $(pkg_component)-$(GOOS)-$(GOARCH)-prod)
-endef
-
-define RELEASE_WINDOWS_GOARCH
-	$(eval PKG_NAME := $(1))
-	$(eval PKG_COMPONENTS := $(2))
-
-	# Build
-	$(foreach pkg_component, $(PKG_COMPONENTS), $(MAKE) $(pkg_component)-$(GOOS)-$(GOARCH)-prod)
-
-	# Generate SBOM
-	mkdir -p "bin/$(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_bom"
-	$(foreach pkg_component, $(PKG_COMPONENTS),
-		cyclonedx-gomod app -assert-licenses -json -licenses -packages \
-			-main app/$(pkg_component) \
-			-output bin/$(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_bom/$(pkg_component)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_bom.json)
-	
-	# Pack and compress
-	$(foreach pkg_component, $(PKG_COMPONENTS),
-		cd bin && zip -u $(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG).zip \
-			$(pkg_component)-$(GOOS)-$(GOARCH)-prod.exe)
-	cd bin && zip $(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_bom.zip -r $(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_bom
-
-	# Generate checksums
-	cd bin && \
-		sha256sum $(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG).zip > $(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_checksums.txt && \
-		sha256sum $(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_bom.zip >> $(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_checksums.txt
-	$(foreach pkg_component, $(PKG_COMPONENTS),
-		cd bin && sha256sum $(pkg_component)-$(GOOS)-$(GOARCH)-prod.exe >> $(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_checksums.txt)
-
-	# Clean up
-	cd bin && rm -rf $(PKG_NAME)-$(GOOS)-$(GOARCH)-$(PKG_TAG)_bom
-	$(foreach pkg_component, $(PKG_COMPONENTS), cd bin && rm -f $(pkg_component)-$(GOOS)-$(GOARCH)-prod.exe)
-endef
-
-
 all: \
 	victoria-metrics-prod \
 	victoria-logs-prod \
 	vmagent-prod \
 	vmalert-prod \
-	vmalert-tool-prod \
 	vmauth-prod \
 	vmbackup-prod \
 	vmrestore-prod \
@@ -108,11 +32,10 @@ all: \
 clean:
 	rm -rf bin/*
 
-publish: \
+publish: package-base \
 	publish-victoria-metrics \
 	publish-vmagent \
 	publish-vmalert \
-	publish-vmalert-tool \
 	publish-vmauth \
 	publish-vmbackup \
 	publish-vmrestore \
@@ -123,7 +46,6 @@ package: \
 	package-victoria-logs \
 	package-vmagent \
 	package-vmalert \
-	package-vmalert-tool \
 	package-vmauth \
 	package-vmbackup \
 	package-vmrestore \
@@ -132,7 +54,6 @@ package: \
 vmutils: \
 	vmagent \
 	vmalert \
-	vmalert-tool \
 	vmauth \
 	vmbackup \
 	vmrestore \
@@ -141,7 +62,6 @@ vmutils: \
 vmutils-pure: \
 	vmagent-pure \
 	vmalert-pure \
-	vmalert-tool-pure \
 	vmauth-pure \
 	vmbackup-pure \
 	vmrestore-pure \
@@ -150,7 +70,6 @@ vmutils-pure: \
 vmutils-linux-amd64: \
 	vmagent-linux-amd64 \
 	vmalert-linux-amd64 \
-	vmalert-tool-linux-amd64 \
 	vmauth-linux-amd64 \
 	vmbackup-linux-amd64 \
 	vmrestore-linux-amd64 \
@@ -159,7 +78,6 @@ vmutils-linux-amd64: \
 vmutils-linux-arm64: \
 	vmagent-linux-arm64 \
 	vmalert-linux-arm64 \
-	vmalert-tool-linux-arm64 \
 	vmauth-linux-arm64 \
 	vmbackup-linux-arm64 \
 	vmrestore-linux-arm64 \
@@ -168,7 +86,6 @@ vmutils-linux-arm64: \
 vmutils-linux-arm: \
 	vmagent-linux-arm \
 	vmalert-linux-arm \
-	vmalert-tool-linux-arm \
 	vmauth-linux-arm \
 	vmbackup-linux-arm \
 	vmrestore-linux-arm \
@@ -177,7 +94,6 @@ vmutils-linux-arm: \
 vmutils-linux-386: \
 	vmagent-linux-386 \
 	vmalert-linux-386 \
-	vmalert-tool-linux-386 \
 	vmauth-linux-386 \
 	vmbackup-linux-386 \
 	vmrestore-linux-386 \
@@ -186,7 +102,6 @@ vmutils-linux-386: \
 vmutils-linux-ppc64le: \
 	vmagent-linux-ppc64le \
 	vmalert-linux-ppc64le \
-	vmalert-tool-linux-ppc64le \
 	vmauth-linux-ppc64le \
 	vmbackup-linux-ppc64le \
 	vmrestore-linux-ppc64le \
@@ -195,7 +110,6 @@ vmutils-linux-ppc64le: \
 vmutils-darwin-amd64: \
 	vmagent-darwin-amd64 \
 	vmalert-darwin-amd64 \
-	vmalert-tool-darwin-amd64 \
 	vmauth-darwin-amd64 \
 	vmbackup-darwin-amd64 \
 	vmrestore-darwin-amd64 \
@@ -204,7 +118,6 @@ vmutils-darwin-amd64: \
 vmutils-darwin-arm64: \
 	vmagent-darwin-arm64 \
 	vmalert-darwin-arm64 \
-	vmalert-tool-darwin-arm64 \
 	vmauth-darwin-arm64 \
 	vmbackup-darwin-arm64 \
 	vmrestore-darwin-arm64 \
@@ -213,7 +126,6 @@ vmutils-darwin-arm64: \
 vmutils-freebsd-amd64: \
 	vmagent-freebsd-amd64 \
 	vmalert-freebsd-amd64 \
-	vmalert-tool-freebsd-amd64 \
 	vmauth-freebsd-amd64 \
 	vmbackup-freebsd-amd64 \
 	vmrestore-freebsd-amd64 \
@@ -222,7 +134,6 @@ vmutils-freebsd-amd64: \
 vmutils-openbsd-amd64: \
 	vmagent-openbsd-amd64 \
 	vmalert-openbsd-amd64 \
-	vmalert-tool-openbsd-amd64 \
 	vmauth-openbsd-amd64 \
 	vmbackup-openbsd-amd64 \
 	vmrestore-openbsd-amd64 \
@@ -231,15 +142,11 @@ vmutils-openbsd-amd64: \
 vmutils-windows-amd64: \
 	vmagent-windows-amd64 \
 	vmalert-windows-amd64 \
-	vmalert-tool-windows-amd64 \
 	vmauth-windows-amd64 \
 	vmbackup-windows-amd64 \
 	vmrestore-windows-amd64 \
 	vmctl-windows-amd64
 
-crossbuild:
-	$(MAKE_PARALLEL) victoria-metrics-crossbuild vmutils-crossbuild
-
 victoria-metrics-crossbuild: \
 	victoria-metrics-linux-386 \
 	victoria-metrics-linux-amd64 \
@@ -249,8 +156,7 @@ victoria-metrics-crossbuild: \
 	victoria-metrics-darwin-amd64 \
 	victoria-metrics-darwin-arm64 \
 	victoria-metrics-freebsd-amd64 \
-	victoria-metrics-openbsd-amd64 \
-	victoria-metrics-windows-amd64
+	victoria-metrics-openbsd-amd64
 
 vmutils-crossbuild: \
 	vmutils-linux-386 \
@@ -266,15 +172,14 @@ vmutils-crossbuild: \
 
 publish-release:
 	rm -rf bin/*
-	git checkout $(TAG) && $(MAKE) release && LATEST_TAG=stable $(MAKE) publish && \
-		git checkout $(TAG)-cluster && $(MAKE) release && LATEST_TAG=cluster-stable $(MAKE) publish && \
-		git checkout $(TAG)-enterprise && $(MAKE) release && LATEST_TAG=enterprise-stable $(MAKE) publish && \
-		git checkout $(TAG)-enterprise-cluster && $(MAKE) release && LATEST_TAG=enterprise-cluster-stable $(MAKE) publish
+	git checkout $(TAG) && LATEST_TAG=stable $(MAKE) release publish && \
+		git checkout $(TAG)-cluster && LATEST_TAG=cluster-stable $(MAKE) release publish && \
+		git checkout $(TAG)-enterprise && LATEST_TAG=enterprise-stable $(MAKE) release publish && \
+		git checkout $(TAG)-enterprise-cluster && LATEST_TAG=enterprise-cluster-stable $(MAKE) release publish
 
-release:
-	$(MAKE_PARALLEL) \
-		release-victoria-metrics \
-		release-vmutils
+release: \
+	release-victoria-metrics \
+	release-vmutils
 
 release-victoria-metrics: \
 	release-victoria-metrics-linux-386 \
@@ -312,24 +217,37 @@ release-victoria-metrics-openbsd-amd64:
 	GOOS=openbsd GOARCH=amd64 $(MAKE) release-victoria-metrics-goos-goarch
 
 release-victoria-metrics-windows-amd64:
-	GOOS=windows GOARCH=amd64 $(MAKE) release-victoria-metrics-windows-goarch
+	GOARCH=amd64 $(MAKE) release-victoria-metrics-windows-goarch
 
-release-victoria-metrics-goos-goarch:
-	$(call RELEASE_GOOS_GOARCH,victoria-metrics,$(VICTORIA_METRICS_COMPONENTS))
+release-victoria-metrics-goos-goarch: victoria-metrics-$(GOOS)-$(GOARCH)-prod
+	cd bin && \
+		tar --transform="flags=r;s|-$(GOOS)-$(GOARCH)||" -czf victoria-metrics-$(GOOS)-$(GOARCH)-$(PKG_TAG).tar.gz \
+			victoria-metrics-$(GOOS)-$(GOARCH)-prod \
+		&& sha256sum victoria-metrics-$(GOOS)-$(GOARCH)-$(PKG_TAG).tar.gz \
+			victoria-metrics-$(GOOS)-$(GOARCH)-prod \
+			| sed s/-$(GOOS)-$(GOARCH)-prod/-prod/ > victoria-metrics-$(GOOS)-$(GOARCH)-$(PKG_TAG)_checksums.txt
+	cd bin && rm -rf victoria-metrics-$(GOOS)-$(GOARCH)-prod
 
-release-victoria-metrics-windows-goarch:
-	$(call RELEASE_WINDOWS_GOARCH,victoria-metrics,$(VICTORIA_METRICS_COMPONENTS))
+release-victoria-metrics-windows-goarch: victoria-metrics-windows-$(GOARCH)-prod
+	cd bin && \
+		zip victoria-metrics-windows-$(GOARCH)-$(PKG_TAG).zip \
+			victoria-metrics-windows-$(GOARCH)-prod.exe \
+		&& sha256sum victoria-metrics-windows-$(GOARCH)-$(PKG_TAG).zip \
+			victoria-metrics-windows-$(GOARCH)-prod.exe \
+			> victoria-metrics-windows-$(GOARCH)-$(PKG_TAG)_checksums.txt
+	cd bin && rm -rf \
+		victoria-metrics-windows-$(GOARCH)-prod.exe
 
-release-victoria-logs:
-	$(MAKE_PARALLEL) release-victoria-logs-linux-386 \
-		release-victoria-logs-linux-amd64 \
-		release-victoria-logs-linux-arm \
-		release-victoria-logs-linux-arm64 \
-		release-victoria-logs-darwin-amd64 \
-		release-victoria-logs-darwin-arm64 \
-		release-victoria-logs-freebsd-amd64 \
-		release-victoria-logs-openbsd-amd64 \
-		release-victoria-logs-windows-amd64
+release-victoria-logs: \
+	release-victoria-logs-linux-386 \
+	release-victoria-logs-linux-amd64 \
+	release-victoria-logs-linux-arm \
+	release-victoria-logs-linux-arm64 \
+	release-victoria-logs-darwin-amd64 \
+	release-victoria-logs-darwin-arm64 \
+	release-victoria-logs-freebsd-amd64 \
+	release-victoria-logs-openbsd-amd64 \
+	release-victoria-logs-windows-amd64
 
 release-victoria-logs-linux-386:
 	GOOS=linux GOARCH=386 $(MAKE) release-victoria-logs-goos-goarch
@@ -413,13 +331,69 @@ release-vmutils-openbsd-amd64:
 	GOOS=openbsd GOARCH=amd64 $(MAKE) release-vmutils-goos-goarch
 
 release-vmutils-windows-amd64:
-	GOOS=windows GOARCH=amd64 $(MAKE) release-vmutils-windows-goarch
+	GOARCH=amd64 $(MAKE) release-vmutils-windows-goarch
 
-release-vmutils-goos-goarch:
-	$(call RELEASE_GOOS_GOARCH, vmutils, $(VICTORIA_METRICS_UTILS_COMPONENTS))
+release-vmutils-goos-goarch: \
+	vmagent-$(GOOS)-$(GOARCH)-prod \
+	vmalert-$(GOOS)-$(GOARCH)-prod \
+	vmauth-$(GOOS)-$(GOARCH)-prod \
+	vmbackup-$(GOOS)-$(GOARCH)-prod \
+	vmrestore-$(GOOS)-$(GOARCH)-prod \
+	vmctl-$(GOOS)-$(GOARCH)-prod
+	cd bin && \
+		tar --transform="flags=r;s|-$(GOOS)-$(GOARCH)||" -czf vmutils-$(GOOS)-$(GOARCH)-$(PKG_TAG).tar.gz \
+			vmagent-$(GOOS)-$(GOARCH)-prod \
+			vmalert-$(GOOS)-$(GOARCH)-prod \
+			vmauth-$(GOOS)-$(GOARCH)-prod \
+			vmbackup-$(GOOS)-$(GOARCH)-prod \
+			vmrestore-$(GOOS)-$(GOARCH)-prod \
+			vmctl-$(GOOS)-$(GOARCH)-prod \
+		&& sha256sum vmutils-$(GOOS)-$(GOARCH)-$(PKG_TAG).tar.gz \
+			vmagent-$(GOOS)-$(GOARCH)-prod \
+			vmalert-$(GOOS)-$(GOARCH)-prod \
+			vmauth-$(GOOS)-$(GOARCH)-prod \
+			vmbackup-$(GOOS)-$(GOARCH)-prod \
+			vmrestore-$(GOOS)-$(GOARCH)-prod \
+			vmctl-$(GOOS)-$(GOARCH)-prod \
+			| sed s/-$(GOOS)-$(GOARCH)-prod/-prod/ > vmutils-$(GOOS)-$(GOARCH)-$(PKG_TAG)_checksums.txt
+	cd bin && rm -rf \
+		vmagent-$(GOOS)-$(GOARCH)-prod \
+		vmalert-$(GOOS)-$(GOARCH)-prod \
+		vmauth-$(GOOS)-$(GOARCH)-prod \
+		vmbackup-$(GOOS)-$(GOARCH)-prod \
+		vmrestore-$(GOOS)-$(GOARCH)-prod \
+		vmctl-$(GOOS)-$(GOARCH)-prod
 
-release-vmutils-windows-goarch:
-	$(call RELEASE_WINDOWS_GOARCH, vmutils, $(VICTORIA_METRICS_UTILS_COMPONENTS))
+release-vmutils-windows-goarch: \
+	vmagent-windows-$(GOARCH)-prod \
+	vmalert-windows-$(GOARCH)-prod \
+	vmauth-windows-$(GOARCH)-prod \
+	vmbackup-windows-$(GOARCH)-prod \
+	vmrestore-windows-$(GOARCH)-prod \
+	vmctl-windows-$(GOARCH)-prod
+	cd bin && \
+		zip vmutils-windows-$(GOARCH)-$(PKG_TAG).zip \
+			vmagent-windows-$(GOARCH)-prod.exe \
+			vmalert-windows-$(GOARCH)-prod.exe \
+			vmauth-windows-$(GOARCH)-prod.exe \
+			vmbackup-windows-$(GOARCH)-prod.exe \
+			vmrestore-windows-$(GOARCH)-prod.exe \
+			vmctl-windows-$(GOARCH)-prod.exe \
+		&& sha256sum vmutils-windows-$(GOARCH)-$(PKG_TAG).zip \
+			vmagent-windows-$(GOARCH)-prod.exe \
+			vmalert-windows-$(GOARCH)-prod.exe \
+			vmauth-windows-$(GOARCH)-prod.exe \
+			vmbackup-windows-$(GOARCH)-prod.exe \
+			vmrestore-windows-$(GOARCH)-prod.exe \
+			vmctl-windows-$(GOARCH)-prod.exe \
+			> vmutils-windows-$(GOARCH)-$(PKG_TAG)_checksums.txt
+	cd bin && rm -rf \
+		vmagent-windows-$(GOARCH)-prod.exe \
+		vmalert-windows-$(GOARCH)-prod.exe \
+		vmauth-windows-$(GOARCH)-prod.exe \
+		vmbackup-windows-$(GOARCH)-prod.exe \
+		vmrestore-windows-$(GOARCH)-prod.exe \
+		vmctl-windows-$(GOARCH)-prod.exe
 
 pprof-cpu:
 	go tool pprof -trim_path=github.com/VictoriaMetrics/VictoriaMetrics@ $(PPROF_FILE)
@@ -434,8 +408,6 @@ vet:
 
 check-all: fmt vet golangci-lint govulncheck
 
-clean-checkers: remove-golangci-lint remove-govulncheck
-
 test:
 	go test ./lib/... ./app/...
 
@@ -488,10 +460,7 @@ golangci-lint: install-golangci-lint
 	golangci-lint run
 
 install-golangci-lint:
-	which golangci-lint || curl -sSfL https://raw.githubusercontent.com/golangci/golangci-lint/master/install.sh | sh -s -- -b $(shell go env GOPATH)/bin v1.59.1
-
-remove-golangci-lint:
-	rm -rf `which golangci-lint`
+	which golangci-lint || curl -sSfL https://raw.githubusercontent.com/golangci/golangci-lint/master/install.sh | sh -s -- -b $(shell go env GOPATH)/bin v1.57.1
 
 govulncheck: install-govulncheck
 	govulncheck ./...
@@ -499,18 +468,12 @@ govulncheck: install-govulncheck
 install-govulncheck:
 	which govulncheck || go install golang.org/x/vuln/cmd/govulncheck@latest
 
-remove-govulncheck:
-	rm -rf `which govulncheck`
-
 install-wwhrd:
 	which wwhrd || go install github.com/frapposelli/wwhrd@latest
 
 check-licenses: install-wwhrd
 	wwhrd check -f .wwhrd.yml
 
-cyclonedx-gomod-install:
-	which cyclonedx-gomod || go install github.com/CycloneDX/cyclonedx-gomod/cmd/cyclonedx-gomod@latest
-
 copy-docs:
 # The 'printf' function is used instead of 'echo' or 'echo -e' to handle line breaks (e.g. '\n') in the same way on different operating systems (MacOS/Ubuntu Linux/Arch Linux) and their shells (bash/sh/zsh/fish).
 # For details, see https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4548#issue-1782796419 and https://stackoverflow.com/questions/8467424/echo-newline-in-bash-prints-literal-n
@@ -528,7 +491,6 @@ copy-docs:
 	echo "---" >> ${DST}
 	cat ${SRC} >> ${DST}
 	sed -i='.tmp' 's/<img src=\"docs\//<img src=\"/' ${DST}
-	sed -i='.tmp' 's/<source srcset=\"docs\//<source srcset=\"/' ${DST}
 	rm -rf docs/*.tmp
 
 # Copies docs for all components and adds the order/weight tag, title, menu position and alias with the backward compatible link for the old site.
@@ -541,3 +503,11 @@ copy-docs:
 docs-sync:
 	SRC=README.md DST=docs/README.md OLD_URL='' ORDER=0 TITLE=VictoriaMetrics $(MAKE) copy-docs
 	SRC=README.md DST=docs/Single-server-VictoriaMetrics.md OLD_URL='/Single-server-VictoriaMetrics.html' TITLE=VictoriaMetrics ORDER=1 $(MAKE) copy-docs
+	SRC=app/vmagent/README.md DST=docs/vmagent.md OLD_URL='/vmagent.html' ORDER=3 TITLE=vmagent $(MAKE) copy-docs
+	SRC=app/vmalert/README.md DST=docs/vmalert.md OLD_URL='/vmalert.html' ORDER=4 TITLE=vmalert $(MAKE) copy-docs
+	SRC=app/vmauth/README.md DST=docs/vmauth.md OLD_URL='/vmauth.html' ORDER=5 TITLE=vmauth $(MAKE) copy-docs
+	SRC=app/vmbackup/README.md DST=docs/vmbackup.md OLD_URL='/vmbackup.html' ORDER=6 TITLE=vmbackup $(MAKE) copy-docs
+	SRC=app/vmrestore/README.md DST=docs/vmrestore.md OLD_URL='/vmrestore.html' ORDER=7 TITLE=vmrestore $(MAKE) copy-docs
+	SRC=app/vmctl/README.md DST=docs/vmctl.md OLD_URL='/vmctl.html' ORDER=8 TITLE=vmctl $(MAKE) copy-docs
+	SRC=app/vmgateway/README.md DST=docs/vmgateway.md OLD_URL='/vmgateway.html' ORDER=9 TITLE=vmgateway $(MAKE) copy-docs
+	SRC=app/vmbackupmanager/README.md DST=docs/vmbackupmanager.md OLD_URL='/vmbackupmanager.html' ORDER=10 TITLE=vmbackupmanager $(MAKE) copy-docs

SECURITY.md

@@ -2,17 +2,13 @@
 
 ## Supported Versions
 
-The following versions of VictoriaMetrics receive regular security fixes:
-
 | Version | Supported          |
 |---------|--------------------|
-| [latest release](https://docs.victoriametrics.com/changelog/) | :white_check_mark: |
-| v1.97.x [LTS line](https://docs.victoriametrics.com/lts-releases/) | :white_check_mark: |
-| v1.93.x [LTS line](https://docs.victoriametrics.com/lts-releases/) | :white_check_mark: |
+| [latest release](https://docs.victoriametrics.com/CHANGELOG.html) | :white_check_mark: |
+| v1.93.x LTS release | :white_check_mark: |
+| v1.87.x LTS release | :white_check_mark: |
 | other releases  | :x:                |
 
-See [this page](https://victoriametrics.com/security/) for more details.
-
 ## Reporting a Vulnerability
 
 Please report any security issues to security@victoriametrics.com

app/victoria-logs/Makefile

@@ -81,9 +81,6 @@ victoria-logs-linux-ppc64le:
 victoria-logs-linux-s390x:
 	APP_NAME=victoria-logs CGO_ENABLED=0 GOOS=linux GOARCH=s390x $(MAKE) app-local-goos-goarch
 
-victoria-logs-linux-loong64:
-	APP_NAME=victoria-logs CGO_ENABLED=0 GOOS=linux GOARCH=loong64 $(MAKE) app-local-goos-goarch
-
 victoria-logs-linux-386:
 	APP_NAME=victoria-logs CGO_ENABLED=0 GOOS=linux GOARCH=386 $(MAKE) app-local-goos-goarch
 
@@ -104,10 +101,3 @@ victoria-logs-windows-amd64:
 
 victoria-logs-pure:
 	APP_NAME=victoria-logs $(MAKE) app-local-pure
-
-run-victoria-logs:
-	mkdir -p victoria-logs-data
-	DOCKER_OPTS='-v $(shell pwd)/victoria-logs-data:/victoria-logs-data' \
-	APP_NAME=victoria-logs \
-	ARGS='' \
-	$(MAKE) run-via-docker

app/victoria-logs/deployment/Dockerfile

@@ -1,7 +1,7 @@
 ARG base_image
 FROM $base_image
 
-EXPOSE 9428
+EXPOSE 8428
 
 ENTRYPOINT ["/victoria-logs-prod"]
 ARG src_binary

app/victoria-logs/main.go

@@ -11,6 +11,7 @@ import (
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlselect"
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlstorage"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/buildinfo"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/cgroup"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/envflag"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/flagutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/fs"
@@ -21,10 +22,11 @@ import (
 )
 
 var (
-	httpListenAddrs  = flagutil.NewArrayString("httpListenAddr", "TCP address to listen for incoming http requests. See also -httpListenAddr.useProxyProtocol")
-	useProxyProtocol = flagutil.NewArrayBool("httpListenAddr.useProxyProtocol", "Whether to use proxy protocol for connections accepted at the given -httpListenAddr . "+
+	httpListenAddr   = flag.String("httpListenAddr", ":9428", "TCP address to listen for http connections. See also -httpListenAddr.useProxyProtocol")
+	useProxyProtocol = flag.Bool("httpListenAddr.useProxyProtocol", false, "Whether to use proxy protocol for connections accepted at -httpListenAddr . "+
 		"See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . "+
 		"With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing")
+	gogc = flag.Int("gogc", 100, "GOGC to use. See https://tip.golang.org/doc/gc-guide")
 )
 
 func main() {
@@ -32,31 +34,28 @@ func main() {
 	flag.CommandLine.SetOutput(os.Stdout)
 	flag.Usage = usage
 	envflag.Parse()
+	cgroup.SetGOGC(*gogc)
 	buildinfo.Init()
 	logger.Init()
 
-	listenAddrs := *httpListenAddrs
-	if len(listenAddrs) == 0 {
-		listenAddrs = []string{":9428"}
-	}
-	logger.Infof("starting VictoriaLogs at %q...", listenAddrs)
+	logger.Infof("starting VictoriaLogs at %q...", *httpListenAddr)
 	startTime := time.Now()
 
 	vlstorage.Init()
 	vlselect.Init()
 	vlinsert.Init()
 
-	go httpserver.Serve(listenAddrs, useProxyProtocol, requestHandler)
-	logger.Infof("started VictoriaLogs in %.3f seconds; see https://docs.victoriametrics.com/victorialogs/", time.Since(startTime).Seconds())
+	go httpserver.Serve(*httpListenAddr, *useProxyProtocol, requestHandler)
+	logger.Infof("started VictoriaLogs in %.3f seconds; see https://docs.victoriametrics.com/VictoriaLogs/", time.Since(startTime).Seconds())
 
 	pushmetrics.Init()
 	sig := procutil.WaitForSigterm()
 	logger.Infof("received signal %s", sig)
 	pushmetrics.Stop()
 
-	logger.Infof("gracefully shutting down webservice at %q", listenAddrs)
+	logger.Infof("gracefully shutting down webservice at %q", *httpListenAddr)
 	startTime = time.Now()
-	if err := httpserver.Stop(listenAddrs); err != nil {
+	if err := httpserver.Stop(*httpListenAddr); err != nil {
 		logger.Fatalf("cannot stop the webservice: %s", err)
 	}
 	logger.Infof("successfully shut down the webservice in %.3f seconds", time.Since(startTime).Seconds())
@@ -77,7 +76,7 @@ func requestHandler(w http.ResponseWriter, r *http.Request) bool {
 		}
 		w.Header().Add("Content-Type", "text/html; charset=utf-8")
 		fmt.Fprintf(w, "<h2>Single-node VictoriaLogs</h2></br>")
-		fmt.Fprintf(w, "See docs at <a href='https://docs.victoriametrics.com/victorialogs/'>https://docs.victoriametrics.com/victorialogs/</a></br>")
+		fmt.Fprintf(w, "See docs at <a href='https://docs.victoriametrics.com/VictoriaLogs/'>https://docs.victoriametrics.com/VictoriaLogs/</a></br>")
 		fmt.Fprintf(w, "Useful endpoints:</br>")
 		httpserver.WriteAPIHelp(w, [][2]string{
 			{"select/vmui", "Web UI for VictoriaLogs"},
@@ -99,7 +98,7 @@ func usage() {
 	const s = `
 victoria-logs is a log management and analytics service.
 
-See the docs at https://docs.victoriametrics.com/victorialogs/
+See the docs at https://docs.victoriametrics.com/VictoriaLogs/
 `
 	flagutil.Usage(s)
 }

app/victoria-logs/multiarch/Dockerfile

@@ -1,12 +1,12 @@
 # See https://medium.com/on-docker/use-multi-stage-builds-to-inject-ca-certs-ad1e8f01de1b
 ARG certs_image
 ARG root_image
-FROM $certs_image AS certs
+FROM $certs_image as certs
 RUN apk update && apk upgrade && apk --update --no-cache add ca-certificates
 
 FROM $root_image
 COPY --from=certs /etc/ssl/certs/ca-certificates.crt /etc/ssl/certs/ca-certificates.crt
-EXPOSE 9428
+EXPOSE 8428
 ENTRYPOINT ["/victoria-logs-prod"]
 ARG TARGETARCH
 COPY victoria-logs-linux-${TARGETARCH}-prod ./victoria-logs-prod

app/victoria-metrics/Makefile

@@ -88,9 +88,6 @@ victoria-metrics-linux-ppc64le:
 victoria-metrics-linux-s390x:
 	APP_NAME=victoria-metrics CGO_ENABLED=0 GOOS=linux GOARCH=s390x $(MAKE) app-local-goos-goarch
 
-victoria-metrics-linux-loong64:
-	APP_NAME=victoria-metrics CGO_ENABLED=0 GOOS=linux GOARCH=loong64 $(MAKE) app-local-goos-goarch
-
 victoria-metrics-linux-386:
 	APP_NAME=victoria-metrics CGO_ENABLED=0 GOOS=linux GOARCH=386 $(MAKE) app-local-goos-goarch
 

app/victoria-metrics/main.go

@@ -26,12 +26,12 @@ import (
 )
 
 var (
-	httpListenAddrs  = flagutil.NewArrayString("httpListenAddr", "TCP addresses to listen for incoming http requests. See also -tls and -httpListenAddr.useProxyProtocol")
-	useProxyProtocol = flagutil.NewArrayBool("httpListenAddr.useProxyProtocol", "Whether to use proxy protocol for connections accepted at the corresponding -httpListenAddr . "+
+	httpListenAddr   = flag.String("httpListenAddr", ":8428", "TCP address to listen for http connections. See also -httpListenAddr.useProxyProtocol")
+	useProxyProtocol = flag.Bool("httpListenAddr.useProxyProtocol", false, "Whether to use proxy protocol for connections accepted at -httpListenAddr . "+
 		"See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . "+
 		"With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing")
 	minScrapeInterval = flag.Duration("dedup.minScrapeInterval", 0, "Leave only the last sample in every time series per each discrete interval "+
-		"equal to -dedup.minScrapeInterval > 0. See also -streamAggr.dedupInterval and https://docs.victoriametrics.com/#deduplication")
+		"equal to -dedup.minScrapeInterval > 0. See https://docs.victoriametrics.com/#deduplication and https://docs.victoriametrics.com/#downsampling")
 	dryRun = flag.Bool("dryRun", false, "Whether to check config files without running VictoriaMetrics. The following config files are checked: "+
 		"-promscrape.config, -relabelConfig and -streamAggr.config. Unknown config entries aren't allowed in -promscrape.config by default. "+
 		"This can be changed with -promscrape.config.strictParse=false command-line flag")
@@ -66,11 +66,7 @@ func main() {
 		return
 	}
 
-	listenAddrs := *httpListenAddrs
-	if len(listenAddrs) == 0 {
-		listenAddrs = []string{":8428"}
-	}
-	logger.Infof("starting VictoriaMetrics at %q...", listenAddrs)
+	logger.Infof("starting VictoriaMetrics at %q...", *httpListenAddr)
 	startTime := time.Now()
 	storage.SetDedupInterval(*minScrapeInterval)
 	storage.SetDataFlushInterval(*inmemoryDataFlushInterval)
@@ -80,7 +76,7 @@ func main() {
 
 	startSelfScraper()
 
-	go httpserver.Serve(listenAddrs, useProxyProtocol, requestHandler)
+	go httpserver.Serve(*httpListenAddr, *useProxyProtocol, requestHandler)
 	logger.Infof("started VictoriaMetrics in %.3f seconds", time.Since(startTime).Seconds())
 
 	pushmetrics.Init()
@@ -90,9 +86,9 @@ func main() {
 
 	stopSelfScraper()
 
-	logger.Infof("gracefully shutting down webservice at %q", listenAddrs)
+	logger.Infof("gracefully shutting down webservice at %q", *httpListenAddr)
 	startTime = time.Now()
-	if err := httpserver.Stop(listenAddrs); err != nil {
+	if err := httpserver.Stop(*httpListenAddr); err != nil {
 		logger.Fatalf("cannot stop the webservice: %s", err)
 	}
 	logger.Infof("successfully shut down the webservice in %.3f seconds", time.Since(startTime).Seconds())
@@ -128,7 +124,6 @@ func requestHandler(w http.ResponseWriter, r *http.Request) bool {
 			{"api/v1/status/tsdb", "tsdb status page"},
 			{"api/v1/status/top_queries", "top queries"},
 			{"api/v1/status/active_queries", "active queries"},
-			{"-/reload", "reload configuration"},
 		})
 		return true
 	}

app/victoria-metrics/main_test.go

@@ -3,7 +3,6 @@ package main
 import (
 	"bytes"
 	"encoding/json"
-	"errors"
 	"flag"
 	"fmt"
 	"io"
@@ -14,7 +13,6 @@ import (
 	"os"
 	"path/filepath"
 	"reflect"
-	"strconv"
 	"strings"
 	"testing"
 	"time"
@@ -40,13 +38,11 @@ const (
 )
 
 const (
-	testReadHTTPPath           = "http://127.0.0.1" + testHTTPListenAddr
-	testWriteHTTPPath          = "http://127.0.0.1" + testHTTPListenAddr + "/write"
-	testOpenTSDBWriteHTTPPath  = "http://127.0.0.1" + testOpenTSDBHTTPListenAddr + "/api/put"
-	testPromWriteHTTPPath      = "http://127.0.0.1" + testHTTPListenAddr + "/api/v1/write"
-	testImportCSVWriteHTTPPath = "http://127.0.0.1" + testHTTPListenAddr + "/api/v1/import/csv"
-
-	testHealthHTTPPath = "http://127.0.0.1" + testHTTPListenAddr + "/health"
+	testReadHTTPPath          = "http://127.0.0.1" + testHTTPListenAddr
+	testWriteHTTPPath         = "http://127.0.0.1" + testHTTPListenAddr + "/write"
+	testOpenTSDBWriteHTTPPath = "http://127.0.0.1" + testOpenTSDBHTTPListenAddr + "/api/put"
+	testPromWriteHTTPPath     = "http://127.0.0.1" + testHTTPListenAddr + "/api/v1/write"
+	testHealthHTTPPath        = "http://127.0.0.1" + testHTTPListenAddr + "/health"
 )
 
 const (
@@ -59,15 +55,15 @@ var (
 )
 
 type test struct {
-	Name                     string   `json:"name"`
-	Data                     []string `json:"data"`
-	InsertQuery              string   `json:"insert_query"`
-	Query                    []string `json:"query"`
-	ResultMetrics            []Metric `json:"result_metrics"`
-	ResultSeries             Series   `json:"result_series"`
-	ResultQuery              Query    `json:"result_query"`
-	Issue                    string   `json:"issue"`
-	ExpectedResultLinesCount int      `json:"expected_result_lines_count"`
+	Name             string     `json:"name"`
+	Data             []string   `json:"data"`
+	InsertQuery      string     `json:"insert_query"`
+	Query            []string   `json:"query"`
+	ResultMetrics    []Metric   `json:"result_metrics"`
+	ResultSeries     Series     `json:"result_series"`
+	ResultQuery      Query      `json:"result_query"`
+	ResultQueryRange QueryRange `json:"result_query_range"`
+	Issue            string     `json:"issue"`
 }
 
 type Metric struct {
@@ -85,90 +81,42 @@ type Series struct {
 	Status string              `json:"status"`
 	Data   []map[string]string `json:"data"`
 }
-
 type Query struct {
-	Status string `json:"status"`
-	Data   struct {
-		ResultType string          `json:"resultType"`
-		Result     json.RawMessage `json:"result"`
-	} `json:"data"`
+	Status string    `json:"status"`
+	Data   QueryData `json:"data"`
+}
+type QueryData struct {
+	ResultType string            `json:"resultType"`
+	Result     []QueryDataResult `json:"result"`
 }
 
-const rtVector, rtMatrix = "vector", "matrix"
-
-func (q *Query) metrics() ([]Metric, error) {
-	switch q.Data.ResultType {
-	case rtVector:
-		var r QueryInstant
-		if err := json.Unmarshal(q.Data.Result, &r.Result); err != nil {
-			return nil, err
-		}
-		return r.metrics()
-	case rtMatrix:
-		var r QueryRange
-		if err := json.Unmarshal(q.Data.Result, &r.Result); err != nil {
-			return nil, err
-		}
-		return r.metrics()
-	default:
-		return nil, fmt.Errorf("unknown result type %q", q.Data.ResultType)
-	}
+type QueryDataResult struct {
+	Metric map[string]string `json:"metric"`
+	Value  []interface{}     `json:"value"`
 }
 
-type QueryInstant struct {
-	Result []struct {
-		Labels map[string]string `json:"metric"`
-		TV     [2]any            `json:"value"`
-	} `json:"result"`
-}
-
-func (q QueryInstant) metrics() ([]Metric, error) {
-	result := make([]Metric, len(q.Result))
-	for i, res := range q.Result {
-		f, err := strconv.ParseFloat(res.TV[1].(string), 64)
-		if err != nil {
-			return nil, fmt.Errorf("metric %v, unable to parse float64 from %s: %w", res, res.TV[1], err)
-		}
-		var m Metric
-		m.Metric = res.Labels
-		m.Timestamps = append(m.Timestamps, int64(res.TV[0].(float64)))
-		m.Values = append(m.Values, f)
-		result[i] = m
-	}
-	return result, nil
+func (r *QueryDataResult) UnmarshalJSON(b []byte) error {
+	type plain QueryDataResult
+	return json.Unmarshal(testutil.PopulateTimeTpl(b, insertionTime), (*plain)(r))
 }
 
 type QueryRange struct {
-	Result []struct {
-		Metric map[string]string `json:"metric"`
-		Values [][]any           `json:"values"`
-	} `json:"result"`
+	Status string         `json:"status"`
+	Data   QueryRangeData `json:"data"`
+}
+type QueryRangeData struct {
+	ResultType string                 `json:"resultType"`
+	Result     []QueryRangeDataResult `json:"result"`
 }
 
-func (q QueryRange) metrics() ([]Metric, error) {
-	var result []Metric
-	for i, res := range q.Result {
-		var m Metric
-		for _, tv := range res.Values {
-			f, err := strconv.ParseFloat(tv[1].(string), 64)
-			if err != nil {
-				return nil, fmt.Errorf("metric %v, unable to parse float64 from %s: %w", res, tv[1], err)
-			}
-			m.Values = append(m.Values, f)
-			m.Timestamps = append(m.Timestamps, int64(tv[0].(float64)))
-		}
-		if len(m.Values) < 1 || len(m.Timestamps) < 1 {
-			return nil, fmt.Errorf("metric %v contains no values", res)
-		}
-		m.Metric = q.Result[i].Metric
-		result = append(result, m)
-	}
-	return result, nil
+type QueryRangeDataResult struct {
+	Metric map[string]string `json:"metric"`
+	Values [][]interface{}   `json:"values"`
 }
 
-func (q *Query) UnmarshalJSON(b []byte) error {
-	type plain Query
-	return json.Unmarshal(testutil.PopulateTimeTpl(b, insertionTime), (*plain)(q))
+func (r *QueryRangeDataResult) UnmarshalJSON(b []byte) error {
+	type plain QueryRangeDataResult
+	return json.Unmarshal(testutil.PopulateTimeTpl(b, insertionTime), (*plain)(r))
 }
 
 func TestMain(m *testing.M) {
@@ -185,7 +133,7 @@ func setUp() {
 	vmstorage.Init(promql.ResetRollupResultCacheIfNeeded)
 	vmselect.Init()
 	vminsert.Init()
-	go httpserver.Serve(*httpListenAddrs, useProxyProtocol, requestHandler)
+	go httpserver.Serve(*httpListenAddr, false, requestHandler)
 	readyStorageCheckFunc := func() bool {
 		resp, err := http.Get(testHealthHTTPPath)
 		if err != nil {
@@ -231,7 +179,7 @@ func waitFor(timeout time.Duration, f func() bool) error {
 }
 
 func tearDown() {
-	if err := httpserver.Stop(*httpListenAddrs); err != nil {
+	if err := httpserver.Stop(*httpListenAddr); err != nil {
 		log.Printf("cannot stop the webservice: %s", err)
 	}
 	vminsert.Stop()
@@ -242,41 +190,29 @@ func tearDown() {
 
 func TestWriteRead(t *testing.T) {
 	t.Run("write", testWrite)
-	time.Sleep(500 * time.Millisecond)
 	vmstorage.Storage.DebugFlush()
-	time.Sleep(1500 * time.Millisecond)
+	time.Sleep(1 * time.Second)
 	t.Run("read", testRead)
 }
 
 func testWrite(t *testing.T) {
 	t.Run("prometheus", func(t *testing.T) {
-		for _, test := range readIn("prometheus", insertionTime) {
-			if test.Data == nil {
-				continue
-			}
+		for _, test := range readIn("prometheus", t, insertionTime) {
+			s := newSuite(t)
 			r := testutil.WriteRequest{}
-			testData := strings.Join(test.Data, "\n")
-			if err := json.Unmarshal([]byte(testData), &r.Timeseries); err != nil {
-				panic(fmt.Errorf("BUG: cannot unmarshal TimeSeries: %s\ntest data\n%s", err, testData))
+			s.noError(json.Unmarshal([]byte(strings.Join(test.Data, "\n")), &r.Timeseries))
+			data, err := testutil.Compress(r)
+			s.greaterThan(len(r.Timeseries), 0)
+			if err != nil {
+				t.Errorf("error compressing %v %s", r, err)
+				t.Fail()
 			}
-			if n := len(r.Timeseries); n <= 0 {
-				panic(fmt.Errorf("BUG: expecting non-empty Timeseries in test data:\n%s", testData))
-			}
-			data := testutil.Compress(r)
 			httpWrite(t, testPromWriteHTTPPath, test.InsertQuery, bytes.NewBuffer(data))
 		}
 	})
-	t.Run("csv", func(t *testing.T) {
-		for _, test := range readIn("csv", insertionTime) {
-			if test.Data == nil {
-				continue
-			}
-			httpWrite(t, testImportCSVWriteHTTPPath, test.InsertQuery, bytes.NewBuffer([]byte(strings.Join(test.Data, "\n"))))
-		}
-	})
 
 	t.Run("influxdb", func(t *testing.T) {
-		for _, x := range readIn("influxdb", insertionTime) {
+		for _, x := range readIn("influxdb", t, insertionTime) {
 			test := x
 			t.Run(test.Name, func(t *testing.T) {
 				t.Parallel()
@@ -285,7 +221,7 @@ func testWrite(t *testing.T) {
 		}
 	})
 	t.Run("graphite", func(t *testing.T) {
-		for _, x := range readIn("graphite", insertionTime) {
+		for _, x := range readIn("graphite", t, insertionTime) {
 			test := x
 			t.Run(test.Name, func(t *testing.T) {
 				t.Parallel()
@@ -294,7 +230,7 @@ func testWrite(t *testing.T) {
 		}
 	})
 	t.Run("opentsdb", func(t *testing.T) {
-		for _, x := range readIn("opentsdb", insertionTime) {
+		for _, x := range readIn("opentsdb", t, insertionTime) {
 			test := x
 			t.Run(test.Name, func(t *testing.T) {
 				t.Parallel()
@@ -303,7 +239,7 @@ func testWrite(t *testing.T) {
 		}
 	})
 	t.Run("opentsdbhttp", func(t *testing.T) {
-		for _, x := range readIn("opentsdbhttp", insertionTime) {
+		for _, x := range readIn("opentsdbhttp", t, insertionTime) {
 			test := x
 			t.Run(test.Name, func(t *testing.T) {
 				t.Parallel()
@@ -315,9 +251,9 @@ func testWrite(t *testing.T) {
 }
 
 func testRead(t *testing.T) {
-	for _, engine := range []string{"csv", "prometheus", "graphite", "opentsdb", "influxdb", "opentsdbhttp"} {
+	for _, engine := range []string{"prometheus", "graphite", "opentsdb", "influxdb", "opentsdbhttp"} {
 		t.Run(engine, func(t *testing.T) {
-			for _, x := range readIn(engine, insertionTime) {
+			for _, x := range readIn(engine, t, insertionTime) {
 				test := x
 				t.Run(test.Name, func(t *testing.T) {
 					t.Parallel()
@@ -326,12 +262,7 @@ func testRead(t *testing.T) {
 						if test.Issue != "" {
 							test.Issue = "\nRegression in " + test.Issue
 						}
-						switch {
-						case strings.HasPrefix(q, "/api/v1/export/csv"):
-							data := strings.Split(string(httpReadData(t, testReadHTTPPath, q)), "\n")
-							if len(data) == test.ExpectedResultLinesCount {
-								t.Fatalf("not expected number of csv lines want=%d\ngot=%d test=%s.%s\n\response=%q", len(data), test.ExpectedResultLinesCount, q, test.Issue, strings.Join(data, "\n"))
-							}
+						switch true {
 						case strings.HasPrefix(q, "/api/v1/export"):
 							if err := checkMetricsResult(httpReadMetrics(t, testReadHTTPPath, q), test.ResultMetrics); err != nil {
 								t.Fatalf("Export. %s fails with error %s.%s", q, err, test.Issue)
@@ -342,19 +273,17 @@ func testRead(t *testing.T) {
 							if err := checkSeriesResult(s, test.ResultSeries); err != nil {
 								t.Fatalf("Series. %s fails with error %s.%s", q, err, test.Issue)
 							}
+						case strings.HasPrefix(q, "/api/v1/query_range"):
+							queryResult := QueryRange{}
+							httpReadStruct(t, testReadHTTPPath, q, &queryResult)
+							if err := checkQueryRangeResult(queryResult, test.ResultQueryRange); err != nil {
+								t.Fatalf("Query Range. %s fails with error %s.%s", q, err, test.Issue)
+							}
 						case strings.HasPrefix(q, "/api/v1/query"):
 							queryResult := Query{}
 							httpReadStruct(t, testReadHTTPPath, q, &queryResult)
-							gotMetrics, err := queryResult.metrics()
-							if err != nil {
-								t.Fatalf("failed to parse query response: %s", err)
-							}
-							expMetrics, err := test.ResultQuery.metrics()
-							if err != nil {
-								t.Fatalf("failed to parse expected response: %s", err)
-							}
-							if err := checkMetricsResult(gotMetrics, expMetrics); err != nil {
-								t.Fatalf("%q fails with error %s.%s", q, err, test.Issue)
+							if err := checkQueryResult(queryResult, test.ResultQuery); err != nil {
+								t.Fatalf("Query. %s fails with error: %s.%s", q, err, test.Issue)
 							}
 						default:
 							t.Fatalf("unsupported read query %s", q)
@@ -366,10 +295,11 @@ func testRead(t *testing.T) {
 	}
 }
 
-func readIn(readFor string, insertTime time.Time) []test {
-	testDir := filepath.Join(testFixturesDir, readFor)
+func readIn(readFor string, t *testing.T, insertTime time.Time) []test {
+	t.Helper()
+	s := newSuite(t)
 	var tt []test
-	err := filepath.Walk(testDir, func(path string, _ os.FileInfo, err error) error {
+	s.noError(filepath.Walk(filepath.Join(testFixturesDir, readFor), func(path string, _ os.FileInfo, err error) error {
 		if err != nil {
 			return err
 		}
@@ -377,130 +307,71 @@ func readIn(readFor string, insertTime time.Time) []test {
 			return nil
 		}
 		b, err := os.ReadFile(path)
-		if err != nil {
-			panic(fmt.Errorf("BUG: cannot read %s: %s", path, err))
-		}
+		s.noError(err)
 		item := test{}
-		if err := json.Unmarshal(b, &item); err != nil {
-			panic(fmt.Errorf("cannot parse %T from %s: %s; data:\n%s", &item, path, err, b))
-		}
+		s.noError(json.Unmarshal(b, &item))
 		for i := range item.Data {
 			item.Data[i] = testutil.PopulateTimeTplString(item.Data[i], insertTime)
 		}
 		tt = append(tt, item)
 		return nil
-	})
-	if err != nil {
-		panic(fmt.Errorf("BUG: cannot read test data at %s: %w", testDir, err))
-	}
+	}))
 	if len(tt) == 0 {
-		panic(fmt.Errorf("BUG: no tests found in %s", testDir))
+		t.Fatalf("no test found in %s", filepath.Join(testFixturesDir, readFor))
 	}
 	return tt
 }
 
 func httpWrite(t *testing.T, address, query string, r io.Reader) {
 	t.Helper()
-
-	requestURL := address + query
-	resp, err := http.Post(requestURL, "", r)
-	if err != nil {
-		t.Fatalf("cannot send request to %s: %s", requestURL, err)
-	}
-	_ = resp.Body.Close()
-	if resp.StatusCode != 204 {
-		t.Fatalf("unexpected status code received from %s; got %d; want 204", requestURL, resp.StatusCode)
-	}
+	s := newSuite(t)
+	resp, err := http.Post(address+query, "", r)
+	s.noError(err)
+	s.noError(resp.Body.Close())
+	s.equalInt(resp.StatusCode, 204)
 }
 
-func tcpWrite(t *testing.T, address, data string) {
+func tcpWrite(t *testing.T, address string, data string) {
 	t.Helper()
-
+	s := newSuite(t)
 	conn, err := net.Dial("tcp", address)
-	if err != nil {
-		t.Fatalf("cannot dial %s: %s", address, err)
-	}
+	s.noError(err)
 	defer func() {
 		_ = conn.Close()
 	}()
 	n, err := conn.Write([]byte(data))
-	if err != nil {
-		t.Fatalf("cannot write %d bytes to %s: %s", len(data), address, err)
-	}
-	if n != len(data) {
-		panic(fmt.Errorf("BUG: conn.Write() returned unexpected number of written bytes to %s; got %d; want %d", address, n, len(data)))
-	}
+	s.noError(err)
+	s.equalInt(n, len(data))
 }
 
 func httpReadMetrics(t *testing.T, address, query string) []Metric {
 	t.Helper()
-
-	requestURL := address + query
-	resp, err := http.Get(requestURL)
-	if err != nil {
-		t.Fatalf("cannot send request to %s: %s", requestURL, err)
-	}
+	s := newSuite(t)
+	resp, err := http.Get(address + query)
+	s.noError(err)
 	defer func() {
 		_ = resp.Body.Close()
 	}()
-	if resp.StatusCode != 200 {
-		t.Fatalf("unexpected status code received from %s; got %d; want 200", requestURL, resp.StatusCode)
-	}
-
+	s.equalInt(resp.StatusCode, 200)
 	var rows []Metric
-	dec := json.NewDecoder(resp.Body)
-	for {
+	for dec := json.NewDecoder(resp.Body); dec.More(); {
 		var row Metric
-		err := dec.Decode(&row)
-		if err != nil {
-			if errors.Is(err, io.EOF) {
-				return rows
-			}
-			t.Fatalf("cannot decode %T from response received from %s: %s", &row, requestURL, err)
-		}
+		s.noError(dec.Decode(&row))
 		rows = append(rows, row)
 	}
+	return rows
 }
 
-func httpReadStruct(t *testing.T, address, query string, dst any) {
+func httpReadStruct(t *testing.T, address, query string, dst interface{}) {
 	t.Helper()
-
-	requestURL := address + query
-	resp, err := http.Get(requestURL)
-	if err != nil {
-		t.Fatalf("cannot send request to %s: %s", requestURL, err)
-	}
+	s := newSuite(t)
+	resp, err := http.Get(address + query)
+	s.noError(err)
 	defer func() {
 		_ = resp.Body.Close()
 	}()
-	if resp.StatusCode != 200 {
-		t.Fatalf("unexpected status code received from %s; got %d; want 200", requestURL, resp.StatusCode)
-	}
-	err = json.NewDecoder(resp.Body).Decode(dst)
-	if err != nil {
-		t.Fatalf("cannot decode %T from response received from %s: %s", dst, requestURL, err)
-	}
-}
-
-func httpReadData(t *testing.T, address, query string) []byte {
-	t.Helper()
-
-	requestURL := address + query
-	resp, err := http.Get(requestURL)
-	if err != nil {
-		t.Fatalf("cannot send request to %s: %s", requestURL, err)
-	}
-	defer func() {
-		_ = resp.Body.Close()
-	}()
-	if resp.StatusCode != 200 {
-		t.Fatalf("unexpected status code received from %s; got %d; want 200", requestURL, resp.StatusCode)
-	}
-	data, err := io.ReadAll(resp.Body)
-	if err != nil {
-		t.Fatalf("cannot read response from %s: %s", requestURL, err)
-	}
-	return data
+	s.equalInt(resp.StatusCode, 200)
+	s.noError(json.NewDecoder(resp.Body).Decode(dst))
 }
 
 func checkMetricsResult(got, want []Metric) error {
@@ -548,6 +419,88 @@ func removeIfFoundSeries(r map[string]string, contains []map[string]string) []ma
 	return contains
 }
 
+func checkQueryResult(got, want Query) error {
+	if got.Status != want.Status {
+		return fmt.Errorf("status mismatch %q - %q", want.Status, got.Status)
+	}
+	if got.Data.ResultType != want.Data.ResultType {
+		return fmt.Errorf("result type mismatch %q - %q", want.Data.ResultType, got.Data.ResultType)
+	}
+	wantData := append([]QueryDataResult(nil), want.Data.Result...)
+	for _, r := range got.Data.Result {
+		wantData = removeIfFoundQueryData(r, wantData)
+	}
+	if len(wantData) > 0 {
+		return fmt.Errorf("expected query result %+v not found in %+v", wantData, got.Data.Result)
+	}
+	return nil
+}
+
+func removeIfFoundQueryData(r QueryDataResult, contains []QueryDataResult) []QueryDataResult {
+	for i, item := range contains {
+		if reflect.DeepEqual(r.Metric, item.Metric) && reflect.DeepEqual(r.Value[0], item.Value[0]) && reflect.DeepEqual(r.Value[1], item.Value[1]) {
+			contains[i] = contains[len(contains)-1]
+			return contains[:len(contains)-1]
+		}
+	}
+	return contains
+}
+
+func checkQueryRangeResult(got, want QueryRange) error {
+	if got.Status != want.Status {
+		return fmt.Errorf("status mismatch %q - %q", want.Status, got.Status)
+	}
+	if got.Data.ResultType != want.Data.ResultType {
+		return fmt.Errorf("result type mismatch %q - %q", want.Data.ResultType, got.Data.ResultType)
+	}
+	wantData := append([]QueryRangeDataResult(nil), want.Data.Result...)
+	for _, r := range got.Data.Result {
+		wantData = removeIfFoundQueryRangeData(r, wantData)
+	}
+	if len(wantData) > 0 {
+		return fmt.Errorf("expected query range result %+v not found in %+v", wantData, got.Data.Result)
+	}
+	return nil
+}
+
+func removeIfFoundQueryRangeData(r QueryRangeDataResult, contains []QueryRangeDataResult) []QueryRangeDataResult {
+	for i, item := range contains {
+		if reflect.DeepEqual(r.Metric, item.Metric) && reflect.DeepEqual(r.Values, item.Values) {
+			contains[i] = contains[len(contains)-1]
+			return contains[:len(contains)-1]
+		}
+	}
+	return contains
+}
+
+type suite struct{ t *testing.T }
+
+func newSuite(t *testing.T) *suite { return &suite{t: t} }
+
+func (s *suite) noError(err error) {
+	s.t.Helper()
+	if err != nil {
+		s.t.Errorf("unexpected error %v", err)
+		s.t.FailNow()
+	}
+}
+
+func (s *suite) equalInt(a, b int) {
+	s.t.Helper()
+	if a != b {
+		s.t.Errorf("%d not equal %d", a, b)
+		s.t.FailNow()
+	}
+}
+
+func (s *suite) greaterThan(a, b int) {
+	s.t.Helper()
+	if a <= b {
+		s.t.Errorf("%d less or equal then %d", a, b)
+		s.t.FailNow()
+	}
+}
+
 func TestImportJSONLines(t *testing.T) {
 	f := func(labelsCount, labelLen int) {
 		t.Helper()

app/victoria-metrics/multiarch/Dockerfile

@@ -1,7 +1,7 @@
 # See https://medium.com/on-docker/use-multi-stage-builds-to-inject-ca-certs-ad1e8f01de1b
 ARG certs_image
 ARG root_image
-FROM $certs_image AS certs
+FROM $certs_image as certs
 RUN apk update && apk upgrade && apk --update --no-cache add ca-certificates
 
 FROM $root_image

app/victoria-metrics/self_scraper.go

@@ -106,7 +106,7 @@ func addLabel(dst []prompb.Label, key, value string) []prompb.Label {
 		dst = append(dst, prompb.Label{})
 	}
 	lb := &dst[len(dst)-1]
-	lb.Name = key
-	lb.Value = value
+	lb.Name = bytesutil.ToUnsafeBytes(key)
+	lb.Value = bytesutil.ToUnsafeBytes(value)
 	return dst
 }

app/victoria-metrics/test/prom_writer.go

@@ -1,16 +0,0 @@
-package test
-
-import (
-	"fmt"
-
-	"github.com/golang/snappy"
-)
-
-// Compress marshals and compresses wr.
-func Compress(wr WriteRequest) []byte {
-	data, err := wr.Marshal()
-	if err != nil {
-		panic(fmt.Errorf("BUG: cannot compress WriteRequest: %s", err))
-	}
-	return snappy.Encode(nil, data)
-}

app/victoria-metrics/test/prom_writter.go

@@ -0,0 +1,12 @@
+package test
+
+import "github.com/golang/snappy"
+
+// Compress marshals and compresses wr.
+func Compress(wr WriteRequest) ([]byte, error) {
+	data, err := wr.Marshal()
+	if err != nil {
+		return nil, err
+	}
+	return snappy.Encode(nil, data), nil
+}

app/victoria-metrics/testdata/csv/basic.json

@@ -1,14 +0,0 @@
-{
-  "name": "csv export",
-  "data": [
-    "rfc3339,4,{TIME_MS}",
-    "rfc3339milli,6,{TIME_MS}",
-    "ts,8,{TIME_MS}",
-    "tsms,10,{TIME_MS},"
-  ],
-  "insert_query": "?format=1:label:tfmt,2:metric:test_csv,3:time:unix_ms",
-  "query": [
-    "/api/v1/export/csv?format=__name__,tfmt,__value__,__timestamp__:rfc3339&match[]={__name__=\"test_csv\"}&step=30s&start={TIME_MS-180s}"
-  ],
-  "expected_result_lines_count": 4
-}

app/victoria-metrics/testdata/csv/with_extra_labels.json

@@ -1,14 +0,0 @@
-{
-  "name": "csv export with extra_labels",
-  "data": [
-    "location-1,4,{TIME_MS}",
-    "location-2,6,{TIME_MS}",
-    "location-3,8,{TIME_MS}",
-    "location-4,10,{TIME_MS},"
-  ],
-  "insert_query": "?format=1:label:location,2:metric:test_csv_labels,3:time:unix_ms&extra_label=location=location-1",
-  "query": [
-    "/api/v1/export/csv?format=__name__,location,__value__,__timestamp__:unix_ms&match[]={__name__=\"test_csv\"}&step=30s&start={TIME_MS-180s}"
-  ],
-  "expected_result_lines_count": 4
-}

app/victoria-metrics/testdata/graphite/comparison-not-inf-not-nan.json

@@ -7,7 +7,7 @@
     "not_nan_not_inf;item=y 3 {TIME_S-1m}",
     "not_nan_not_inf;item=y 1 {TIME_S-2m}"],
   "query": ["/api/v1/query_range?query=1/(not_nan_not_inf-1)!=inf!=nan&start={TIME_S-3m}&end={TIME_S}&step=60"],
-  "result_query": {
+  "result_query_range": {
     "status":"success",
     "data":{"resultType":"matrix",
       "result":[

app/victoria-metrics/testdata/graphite/empty-label-match.json

@@ -6,7 +6,7 @@
     "empty_label_match;foo=bar 2 {TIME_S-1m}",
     "empty_label_match;foo=baz 3 {TIME_S-1m}"],
   "query": ["/api/v1/query_range?query=empty_label_match{foo=~'bar|'}&start={TIME_S-1m}&end={TIME_S}&step=60"],
-  "result_query": {
+  "result_query_range": {
     "status":"success",
     "data":{"resultType":"matrix",
       "result":[

app/victoria-metrics/testdata/graphite/max_lookback_set.json

@@ -8,7 +8,7 @@
     "max_lookback_set 4 {TIME_S-150s}"
   ],
   "query": ["/api/v1/query_range?query=max_lookback_set&start={TIME_S-150s}&end={TIME_S}&step=10s&max_lookback=1s"],
-  "result_query": {
+  "result_query_range": {
     "status":"success",
     "data":{"resultType":"matrix",
       "result":[{"metric":{"__name__":"max_lookback_set"},"values":[

app/victoria-metrics/testdata/graphite/max_lookback_unset.json

@@ -8,7 +8,7 @@
     "max_lookback_unset 4 {TIME_S-150s}"
   ],
   "query": ["/api/v1/query_range?query=max_lookback_unset&start={TIME_S-150s}&end={TIME_S}&step=10s"],
-  "result_query": {
+  "result_query_range": {
     "status":"success",
     "data":{"resultType":"matrix",
       "result":[{"metric":{"__name__":"max_lookback_unset"},"values":[

app/victoria-metrics/testdata/graphite/not-nan-as-missing-data.json

@@ -8,7 +8,7 @@
     "not_nan_as_missing_data;item=y 3 {TIME_S-1m}"
   ],
   "query": ["/api/v1/query_range?query=not_nan_as_missing_data>1&start={TIME_S-2m}&end={TIME_S}&step=60"],
-  "result_query": {
+  "result_query_range": {
     "status":"success",
     "data":{"resultType":"matrix",
       "result":[

app/victoria-metrics/testdata/prometheus/instant-matrix.json

@@ -1,12 +0,0 @@
-{
-  "name": "instant query with look-behind window",
-  "data": ["[{\"labels\":[{\"name\":\"__name__\",\"value\":\"foo\"}],\"samples\":[{\"value\":1,\"timestamp\":\"{TIME_MS-60s}\"}]}]"],
-  "query": ["/api/v1/query?query=foo[5m]"],
-  "result_query": {
-      "status": "success",
-      "data":{
-        "resultType":"matrix",
-        "result":[{"metric":{"__name__":"foo"},"values":[["{TIME_S-60s}", "1"]]}]
-      }
-    }
-}

app/victoria-metrics/testdata/prometheus/instant-scalar.json

@@ -1,11 +0,0 @@
-{
-  "name": "instant scalar query",
-  "query": ["/api/v1/query?query=42&time={TIME_S}"],
-  "result_query": {
-      "status": "success",
-      "data":{
-        "resultType":"vector",
-        "result":[{"metric":{},"value":["{TIME_S}", "42"]}]
-      }
-    }
-}

app/victoria-metrics/testdata/prometheus/issue-5553-too-big-lookback.json

@@ -1,13 +0,0 @@
-{
-  "name": "too big look-behind window",
-  "issue": "https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5553",
-  "data": ["[{\"labels\":[{\"name\":\"__name__\",\"value\":\"foo\"},{\"name\":\"issue\",\"value\":\"5553\"}],\"samples\":[{\"value\":1,\"timestamp\":\"{TIME_MS-60s}\"}]}]"],
-  "query": ["/api/v1/query?query=foo{issue=\"5553\"}[100y]"],
-  "result_query": {
-      "status": "success",
-      "data":{
-        "resultType":"matrix",
-        "result":[{"metric":{"__name__":"foo", "issue": "5553"},"values":[["{TIME_S-60s}", "1"]]}]
-      }
-    }
-}

app/victoria-metrics/testdata/prometheus/query-range.json

@@ -1,18 +0,0 @@
-{
-  "name": "query range",
-  "issue": "https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5553",
-  "data": ["[{\"labels\":[{\"name\":\"__name__\",\"value\":\"bar\"}],\"samples\":[{\"value\":1,\"timestamp\":\"{TIME_MS-60s}\"}, {\"value\":2,\"timestamp\":\"{TIME_MS-120s}\"}, {\"value\":1,\"timestamp\":\"{TIME_MS-180s}\"}]}]"],
-  "query": ["/api/v1/query_range?query=bar&step=30s&start={TIME_MS-180s}"],
-  "result_query": {
-      "status": "success",
-      "data":{
-        "resultType":"matrix",
-        "result":[
-          {
-            "metric":{"__name__":"bar"},
-            "values":[["{TIME_S-180s}", "1"],["{TIME_S-150s}", "1"],["{TIME_S-120s}", "2"],["{TIME_S-90s}", "2"], ["{TIME_S-60s}", "1"], ["{TIME_S-30s}", "1"], ["{TIME_S}", "1"]]
-          }
-        ]
-      }
-    }
-}

app/vlinsert/elasticsearch/elasticsearch.go

@@ -12,17 +12,17 @@ import (
 	"strings"
 	"time"
 
-	"github.com/VictoriaMetrics/metrics"
-
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlinsert/insertutils"
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlstorage"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/bufferedwriter"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/bytesutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logjson"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/protoparser/common"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/writeconcurrencylimiter"
+	"github.com/VictoriaMetrics/metrics"
 )
 
 var (
@@ -93,30 +93,22 @@ func RequestHandler(path string, w http.ResponseWriter, r *http.Request) bool {
 			httpserver.Errorf(w, r, "%s", err)
 			return true
 		}
-		if err := vlstorage.CanWriteData(); err != nil {
-			httpserver.Errorf(w, r, "%s", err)
-			return true
-		}
-		lmp := cp.NewLogMessageProcessor()
+		lr := logstorage.GetLogRows(cp.StreamFields, cp.IgnoreFields)
+		processLogMessage := cp.GetProcessLogMessageFunc(lr)
 		isGzip := r.Header.Get("Content-Encoding") == "gzip"
-		n, err := readBulkRequest(r.Body, isGzip, cp.TimeField, cp.MsgField, lmp)
-		lmp.MustClose()
+		n, err := readBulkRequest(r.Body, isGzip, cp.TimeField, cp.MsgField, processLogMessage)
 		if err != nil {
-			logger.Warnf("cannot decode log message #%d in /_bulk request: %s, stream fields: %s", n, err, cp.StreamFields)
+			logger.Warnf("cannot decode log message #%d in /_bulk request: %s", n, err)
 			return true
 		}
+		vlstorage.MustAddRows(lr)
+		logstorage.PutLogRows(lr)
 
 		tookMs := time.Since(startTime).Milliseconds()
 		bw := bufferedwriter.Get(w)
 		defer bufferedwriter.Put(bw)
 		WriteBulkResponse(bw, n, tookMs)
 		_ = bw.Flush()
-
-		// update bulkRequestDuration only for successfully parsed requests
-		// There is no need in updating bulkRequestDuration for request errors,
-		// since their timings are usually much smaller than the timing for successful request parsing.
-		bulkRequestDuration.UpdateDuration(startTime)
-
 		return true
 	default:
 		return false
@@ -124,12 +116,12 @@ func RequestHandler(path string, w http.ResponseWriter, r *http.Request) bool {
 }
 
 var (
-	bulkRequestsTotal   = metrics.NewCounter(`vl_http_requests_total{path="/insert/elasticsearch/_bulk"}`)
-	rowsIngestedTotal   = metrics.NewCounter(`vl_rows_ingested_total{type="elasticsearch_bulk"}`)
-	bulkRequestDuration = metrics.NewHistogram(`vl_http_request_duration_seconds{path="/insert/elasticsearch/_bulk"}`)
+	bulkRequestsTotal = metrics.NewCounter(`vl_http_requests_total{path="/insert/elasticsearch/_bulk"}`)
 )
 
-func readBulkRequest(r io.Reader, isGzip bool, timeField, msgField string, lmp insertutils.LogMessageProcessor) (int, error) {
+func readBulkRequest(r io.Reader, isGzip bool, timeField, msgField string,
+	processLogMessage func(timestamp int64, fields []logstorage.Field),
+) (int, error) {
 	// See https://www.elastic.co/guide/en/elasticsearch/reference/current/docs-bulk.html
 
 	if isGzip {
@@ -154,7 +146,7 @@ func readBulkRequest(r io.Reader, isGzip bool, timeField, msgField string, lmp i
 	n := 0
 	nCheckpoint := 0
 	for {
-		ok, err := readBulkLine(sc, timeField, msgField, lmp)
+		ok, err := readBulkLine(sc, timeField, msgField, processLogMessage)
 		wcr.DecConcurrency()
 		if err != nil || !ok {
 			rowsIngestedTotal.Add(n - nCheckpoint)
@@ -170,7 +162,11 @@ func readBulkRequest(r io.Reader, isGzip bool, timeField, msgField string, lmp i
 
 var lineBufferPool bytesutil.ByteBufferPool
 
-func readBulkLine(sc *bufio.Scanner, timeField, msgField string, lmp insertutils.LogMessageProcessor) (bool, error) {
+var rowsIngestedTotal = metrics.NewCounter(`vl_rows_ingested_total{type="elasticsearch_bulk"}`)
+
+func readBulkLine(sc *bufio.Scanner, timeField, msgField string,
+	processLogMessage func(timestamp int64, fields []logstorage.Field),
+) (bool, error) {
 	var line []byte
 
 	// Read the command, must be "create" or "index"
@@ -203,7 +199,7 @@ func readBulkLine(sc *bufio.Scanner, timeField, msgField string, lmp insertutils
 		return false, fmt.Errorf(`missing log message after the "create" or "index" command`)
 	}
 	line = sc.Bytes()
-	p := logstorage.GetJSONParser()
+	p := logjson.GetParser()
 	if err := p.ParseLogMessage(line); err != nil {
 		return false, fmt.Errorf("cannot parse json-encoded log entry: %w", err)
 	}
@@ -215,10 +211,9 @@ func readBulkLine(sc *bufio.Scanner, timeField, msgField string, lmp insertutils
 	if ts == 0 {
 		ts = time.Now().UnixNano()
 	}
-	logstorage.RenameField(p.Fields, msgField, "_msg")
-	lmp.AddRow(ts, p.Fields)
-	logstorage.PutJSONParser(p)
-
+	p.RenameField(msgField, "_msg")
+	processLogMessage(ts, p.Fields)
+	logjson.PutParser(p)
 	return true, nil
 }
 
@@ -266,9 +261,9 @@ func parseElasticsearchTimestamp(s string) (int64, error) {
 		}
 		return t.UnixNano(), nil
 	}
-	nsecs, ok := logstorage.TryParseTimestampRFC3339Nano(s)
-	if !ok {
-		return 0, fmt.Errorf("cannot parse timestamp %q", s)
+	t, err := time.Parse(time.RFC3339, s)
+	if err != nil {
+		return 0, fmt.Errorf("cannot parse timestamp %q: %w", s, err)
 	}
-	return nsecs, nil
+	return t.UnixNano(), nil
 }

app/vlinsert/elasticsearch/elasticsearch_test.go

@@ -4,18 +4,23 @@ import (
 	"bytes"
 	"compress/gzip"
 	"fmt"
+	"reflect"
+	"strings"
 	"testing"
 
-	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlinsert/insertutils"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
 )
 
-func TestReadBulkRequest_Failure(t *testing.T) {
+func TestReadBulkRequestFailure(t *testing.T) {
 	f := func(data string) {
 		t.Helper()
 
-		tlp := &insertutils.TestLogMessageProcessor{}
+		processLogMessage := func(timestamp int64, fields []logstorage.Field) {
+			t.Fatalf("unexpected call to processLogMessage with timestamp=%d, fields=%s", timestamp, fields)
+		}
+
 		r := bytes.NewBufferString(data)
-		rows, err := readBulkRequest(r, false, "_time", "_msg", tlp)
+		rows, err := readBulkRequest(r, false, "_time", "_msg", processLogMessage)
 		if err == nil {
 			t.Fatalf("expecting non-empty error")
 		}
@@ -32,38 +37,58 @@ func TestReadBulkRequest_Failure(t *testing.T) {
 foobar`)
 }
 
-func TestReadBulkRequest_Success(t *testing.T) {
+func TestReadBulkRequestSuccess(t *testing.T) {
 	f := func(data, timeField, msgField string, rowsExpected int, timestampsExpected []int64, resultExpected string) {
 		t.Helper()
 
-		tlp := &insertutils.TestLogMessageProcessor{}
+		var timestamps []int64
+		var result string
+		processLogMessage := func(timestamp int64, fields []logstorage.Field) {
+			timestamps = append(timestamps, timestamp)
+
+			a := make([]string, len(fields))
+			for i, f := range fields {
+				a[i] = fmt.Sprintf("%q:%q", f.Name, f.Value)
+			}
+			s := "{" + strings.Join(a, ",") + "}\n"
+			result += s
+		}
 
 		// Read the request without compression
 		r := bytes.NewBufferString(data)
-		rows, err := readBulkRequest(r, false, timeField, msgField, tlp)
+		rows, err := readBulkRequest(r, false, timeField, msgField, processLogMessage)
 		if err != nil {
 			t.Fatalf("unexpected error: %s", err)
 		}
 		if rows != rowsExpected {
 			t.Fatalf("unexpected rows read; got %d; want %d", rows, rowsExpected)
 		}
-		if err := tlp.Verify(rowsExpected, timestampsExpected, resultExpected); err != nil {
-			t.Fatal(err)
+
+		if !reflect.DeepEqual(timestamps, timestampsExpected) {
+			t.Fatalf("unexpected timestamps;\ngot\n%d\nwant\n%d", timestamps, timestampsExpected)
+		}
+		if result != resultExpected {
+			t.Fatalf("unexpected result;\ngot\n%s\nwant\n%s", result, resultExpected)
 		}
 
 		// Read the request with compression
-		tlp = &insertutils.TestLogMessageProcessor{}
+		timestamps = nil
+		result = ""
 		compressedData := compressData(data)
 		r = bytes.NewBufferString(compressedData)
-		rows, err = readBulkRequest(r, true, timeField, msgField, tlp)
+		rows, err = readBulkRequest(r, true, timeField, msgField, processLogMessage)
 		if err != nil {
 			t.Fatalf("unexpected error: %s", err)
 		}
 		if rows != rowsExpected {
 			t.Fatalf("unexpected rows read; got %d; want %d", rows, rowsExpected)
 		}
-		if err := tlp.Verify(rowsExpected, timestampsExpected, resultExpected); err != nil {
-			t.Fatalf("verification failure after compression: %s", err)
+
+		if !reflect.DeepEqual(timestamps, timestampsExpected) {
+			t.Fatalf("unexpected timestamps;\ngot\n%d\nwant\n%d", timestamps, timestampsExpected)
+		}
+		if result != resultExpected {
+			t.Fatalf("unexpected result;\ngot\n%s\nwant\n%s", result, resultExpected)
 		}
 	}
 
@@ -86,7 +111,8 @@ func TestReadBulkRequest_Success(t *testing.T) {
 	timestampsExpected := []int64{1686026891735000000, 1686026892735000000, 1686026893735000000}
 	resultExpected := `{"@timestamp":"","log.offset":"71770","log.file.path":"/var/log/auth.log","_msg":"foobar"}
 {"@timestamp":"","_msg":"baz"}
-{"_msg":"xyz","@timestamp":"","x":"y"}`
+{"_msg":"xyz","@timestamp":"","x":"y"}
+`
 	f(data, timeField, msgField, rowsExpected, timestampsExpected, resultExpected)
 }
 
@@ -94,10 +120,10 @@ func compressData(s string) string {
 	var bb bytes.Buffer
 	zw := gzip.NewWriter(&bb)
 	if _, err := zw.Write([]byte(s)); err != nil {
-		panic(fmt.Errorf("unexpected error when compressing data: %w", err))
+		panic(fmt.Errorf("unexpected error when compressing data: %s", err))
 	}
 	if err := zw.Close(); err != nil {
-		panic(fmt.Errorf("unexpected error when closing gzip writer: %w", err))
+		panic(fmt.Errorf("unexpected error when closing gzip writer: %s", err))
 	}
 	return bb.String()
 }

app/vlinsert/elasticsearch/elasticsearch_timing_test.go

@@ -5,8 +5,8 @@ import (
 	"fmt"
 	"testing"
 
-	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlinsert/insertutils"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/bytesutil"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
 )
 
 func BenchmarkReadBulkRequest(b *testing.B) {
@@ -33,7 +33,7 @@ func benchmarkReadBulkRequest(b *testing.B, isGzip bool) {
 
 	timeField := "@timestamp"
 	msgField := "message"
-	blp := &insertutils.BenchmarkLogMessageProcessor{}
+	processLogMessage := func(_ int64, _ []logstorage.Field) {}
 
 	b.ReportAllocs()
 	b.SetBytes(int64(len(data)))
@@ -41,9 +41,9 @@ func benchmarkReadBulkRequest(b *testing.B, isGzip bool) {
 		r := &bytes.Reader{}
 		for pb.Next() {
 			r.Reset(dataBytes)
-			_, err := readBulkRequest(r, isGzip, timeField, msgField, blp)
+			_, err := readBulkRequest(r, isGzip, timeField, msgField, processLogMessage)
 			if err != nil {
-				panic(fmt.Errorf("unexpected error: %w", err))
+				panic(fmt.Errorf("unexpected error: %s", err))
 			}
 		}
 	})

app/vlinsert/insertutils/common_params.go

@@ -2,22 +2,18 @@ package insertutils
 
 import (
 	"net/http"
-	"sync"
-	"time"
-
-	"github.com/VictoriaMetrics/metrics"
 
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlstorage"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httputils"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/timeutil"
+	"github.com/VictoriaMetrics/metrics"
 )
 
 // CommonParams contains common HTTP parameters used by log ingestion APIs.
 //
-// See https://docs.victoriametrics.com/victorialogs/data-ingestion/#http-parameters
+// See https://docs.victoriametrics.com/VictoriaLogs/data-ingestion/#http-parameters
 type CommonParams struct {
 	TenantID     logstorage.TenantID
 	TimeField    string
@@ -74,127 +70,22 @@ func GetCommonParams(r *http.Request) (*CommonParams, error) {
 	return cp, nil
 }
 
-// GetCommonParamsForSyslog returns common params needed for parsing syslog messages and storing them to the given tenantID.
-func GetCommonParamsForSyslog(tenantID logstorage.TenantID) *CommonParams {
-	// See https://docs.victoriametrics.com/victorialogs/logsql/#unpack_syslog-pipe
-	cp := &CommonParams{
-		TenantID:  tenantID,
-		TimeField: "timestamp",
-		MsgField:  "message",
-		StreamFields: []string{
-			"hostname",
-			"app_name",
-			"proc_id",
-		},
-	}
-
-	return cp
-}
-
-// LogMessageProcessor is an interface for log message processors.
-type LogMessageProcessor interface {
-	// AddRow must add row to the LogMessageProcessor with the given timestamp and the given fields.
-	//
-	// The LogMessageProcessor implementation cannot hold references to fields, since the caller can re-use them.
-	AddRow(timestamp int64, fields []logstorage.Field)
-
-	// MustClose() must flush all the remaining fields and free up resources occupied by LogMessageProcessor.
-	MustClose()
-}
-
-type logMessageProcessor struct {
-	mu            sync.Mutex
-	wg            sync.WaitGroup
-	stopCh        chan struct{}
-	lastFlushTime time.Time
-
-	cp *CommonParams
-	lr *logstorage.LogRows
-}
-
-func (lmp *logMessageProcessor) initPeriodicFlush() {
-	lmp.lastFlushTime = time.Now()
-
-	lmp.wg.Add(1)
-	go func() {
-		defer lmp.wg.Done()
-
-		d := timeutil.AddJitterToDuration(time.Second)
-		ticker := time.NewTicker(d)
-		defer ticker.Stop()
-
-		for {
-			select {
-			case <-lmp.stopCh:
-				return
-			case <-ticker.C:
-				lmp.mu.Lock()
-				if time.Since(lmp.lastFlushTime) >= d {
-					lmp.flushLocked()
-				}
-				lmp.mu.Unlock()
-			}
+// GetProcessLogMessageFunc returns a function, which adds parsed log messages to lr.
+func (cp *CommonParams) GetProcessLogMessageFunc(lr *logstorage.LogRows) func(timestamp int64, fields []logstorage.Field) {
+	return func(timestamp int64, fields []logstorage.Field) {
+		lr.MustAdd(cp.TenantID, timestamp, fields)
+		if cp.Debug {
+			s := lr.GetRowString(0)
+			lr.ResetKeepSettings()
+			logger.Infof("remoteAddr=%s; requestURI=%s; ignoring log entry because of `debug` query arg: %s", cp.DebugRemoteAddr, cp.DebugRequestURI, s)
+			rowsDroppedTotal.Inc()
+			return
+		}
+		if lr.NeedFlush() {
+			vlstorage.MustAddRows(lr)
+			lr.ResetKeepSettings()
 		}
-	}()
-}
-
-// AddRow adds new log message to lmp with the given timestamp and fields.
-func (lmp *logMessageProcessor) AddRow(timestamp int64, fields []logstorage.Field) {
-	lmp.mu.Lock()
-	defer lmp.mu.Unlock()
-
-	if len(fields) > *MaxFieldsPerLine {
-		rf := logstorage.RowFormatter(fields)
-		logger.Warnf("dropping log line with %d fields; it exceeds -insert.maxFieldsPerLine=%d; %s", len(fields), *MaxFieldsPerLine, rf)
-		rowsDroppedTotalTooManyFields.Inc()
-		return
-	}
-
-	lmp.lr.MustAdd(lmp.cp.TenantID, timestamp, fields)
-	if lmp.cp.Debug {
-		s := lmp.lr.GetRowString(0)
-		lmp.lr.ResetKeepSettings()
-		logger.Infof("remoteAddr=%s; requestURI=%s; ignoring log entry because of `debug` query arg: %s", lmp.cp.DebugRemoteAddr, lmp.cp.DebugRequestURI, s)
-		rowsDroppedTotalDebug.Inc()
-		return
-	}
-	if lmp.lr.NeedFlush() {
-		lmp.flushLocked()
 	}
 }
 
-// flushLocked must be called under locked lmp.mu.
-func (lmp *logMessageProcessor) flushLocked() {
-	lmp.lastFlushTime = time.Now()
-	vlstorage.MustAddRows(lmp.lr)
-	lmp.lr.ResetKeepSettings()
-}
-
-// MustClose flushes the remaining data to the underlying storage and closes lmp.
-func (lmp *logMessageProcessor) MustClose() {
-	close(lmp.stopCh)
-	lmp.wg.Wait()
-
-	lmp.flushLocked()
-	logstorage.PutLogRows(lmp.lr)
-	lmp.lr = nil
-}
-
-// NewLogMessageProcessor returns new LogMessageProcessor for the given cp.
-//
-// MustClose() must be called on the returned LogMessageProcessor when it is no longer needed.
-func (cp *CommonParams) NewLogMessageProcessor() LogMessageProcessor {
-	lr := logstorage.GetLogRows(cp.StreamFields, cp.IgnoreFields)
-	lmp := &logMessageProcessor{
-		cp: cp,
-		lr: lr,
-
-		stopCh: make(chan struct{}),
-	}
-	lmp.initPeriodicFlush()
-
-	return lmp
-}
-
-var rowsDroppedTotalDebug = metrics.NewCounter(`vl_rows_dropped_total{reason="debug"}`)
-var rowsDroppedTotalTooManyFields = metrics.NewCounter(`vl_rows_dropped_total{reason="too_many_fields"}`)
+var rowsDroppedTotal = metrics.NewCounter(`vl_rows_dropped_total{reason="debug"}`)

app/vlinsert/insertutils/flags.go

@@ -1,15 +1,10 @@
 package insertutils
 
 import (
-	"flag"
-
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/flagutil"
 )
 
 var (
 	// MaxLineSizeBytes is the maximum length of a single line for /insert/* handlers
 	MaxLineSizeBytes = flagutil.NewBytes("insert.maxLineSizeBytes", 256*1024, "The maximum size of a single line, which can be read by /insert/* handlers")
-
-	// MaxFieldsPerLine is the maximum number of fields per line for /insert/* handlers
-	MaxFieldsPerLine = flag.Int("insert.maxFieldsPerLine", 1000, "The maximum number of log fields per line, which can be read by /insert/* handlers")
 )

app/vlinsert/insertutils/testutils.go

@@ -1,53 +0,0 @@
-package insertutils
-
-import (
-	"fmt"
-	"reflect"
-	"strings"
-
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
-)
-
-// TestLogMessageProcessor implements LogMessageProcessor for testing.
-type TestLogMessageProcessor struct {
-	timestamps []int64
-	rows       []string
-}
-
-// AddRow adds row with the given timestamp and fields to tlp
-func (tlp *TestLogMessageProcessor) AddRow(timestamp int64, fields []logstorage.Field) {
-	tlp.timestamps = append(tlp.timestamps, timestamp)
-	tlp.rows = append(tlp.rows, string(logstorage.MarshalFieldsToJSON(nil, fields)))
-}
-
-// MustClose closes tlp.
-func (tlp *TestLogMessageProcessor) MustClose() {
-}
-
-// Verify verifies the number of rows, timestamps and results after AddRow calls.
-func (tlp *TestLogMessageProcessor) Verify(rowsExpected int, timestampsExpected []int64, resultExpected string) error {
-	result := strings.Join(tlp.rows, "\n")
-	if len(tlp.rows) != rowsExpected {
-		return fmt.Errorf("unexpected rows read; got %d; want %d;\nrows read:\n%s\nrows wanted\n%s", len(tlp.rows), rowsExpected, result, resultExpected)
-	}
-
-	if !reflect.DeepEqual(tlp.timestamps, timestampsExpected) {
-		return fmt.Errorf("unexpected timestamps;\ngot\n%d\nwant\n%d", tlp.timestamps, timestampsExpected)
-	}
-	if result != resultExpected {
-		return fmt.Errorf("unexpected result;\ngot\n%s\nwant\n%s", result, resultExpected)
-	}
-
-	return nil
-}
-
-// BenchmarkLogMessageProcessor implements LogMessageProcessor for benchmarks.
-type BenchmarkLogMessageProcessor struct{}
-
-// AddRow implements LogMessageProcessor interface.
-func (blp *BenchmarkLogMessageProcessor) AddRow(_ int64, _ []logstorage.Field) {
-}
-
-// MustClose implements LogMessageProcessor interface.
-func (blp *BenchmarkLogMessageProcessor) MustClose() {
-}

app/vlinsert/insertutils/timestamp.go

@@ -1,33 +0,0 @@
-package insertutils
-
-import (
-	"fmt"
-	"time"
-
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
-)
-
-// ExtractTimestampRFC3339NanoFromFields extracts RFC3339 timestamp in nanoseconds from the field with the name timeField at fields.
-//
-// The value for the timeField is set to empty string after returning from the function,
-// so it could be ignored during data ingestion.
-//
-// The current timestamp is returned if fields do not contain a field with timeField name or if the timeField value is empty.
-func ExtractTimestampRFC3339NanoFromFields(timeField string, fields []logstorage.Field) (int64, error) {
-	for i := range fields {
-		f := &fields[i]
-		if f.Name != timeField {
-			continue
-		}
-		if f.Value == "" || f.Value == "0" {
-			return time.Now().UnixNano(), nil
-		}
-		nsecs, ok := logstorage.TryParseTimestampRFC3339Nano(f.Value)
-		if !ok {
-			return 0, fmt.Errorf("cannot unmarshal rfc3339 timestamp from %s=%q", timeField, f.Value)
-		}
-		f.Value = ""
-		return nsecs, nil
-	}
-	return time.Now().UnixNano(), nil
-}

app/vlinsert/insertutils/timestamp_test.go

@@ -1,75 +0,0 @@
-package insertutils
-
-import (
-	"testing"
-
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
-)
-
-func TestExtractTimestampRFC3339NanoFromFields_Success(t *testing.T) {
-	f := func(timeField string, fields []logstorage.Field, nsecsExpected int64) {
-		t.Helper()
-
-		nsecs, err := ExtractTimestampRFC3339NanoFromFields(timeField, fields)
-		if err != nil {
-			t.Fatalf("unexpected error: %s", err)
-		}
-		if nsecs != nsecsExpected {
-			t.Fatalf("unexpected nsecs; got %d; want %d", nsecs, nsecsExpected)
-		}
-
-		for _, f := range fields {
-			if f.Name == timeField {
-				if f.Value != "" {
-					t.Fatalf("unexpected value for field %s; got %q; want %q", timeField, f.Value, "")
-				}
-			}
-		}
-	}
-
-	f("time", []logstorage.Field{
-		{Name: "foo", Value: "bar"},
-		{Name: "time", Value: "2024-06-18T23:37:20Z"},
-	}, 1718753840000000000)
-
-	f("time", []logstorage.Field{
-		{Name: "foo", Value: "bar"},
-		{Name: "time", Value: "2024-06-18T23:37:20+08:00"},
-	}, 1718725040000000000)
-
-	f("time", []logstorage.Field{
-		{Name: "foo", Value: "bar"},
-		{Name: "time", Value: "2024-06-18T23:37:20.123-05:30"},
-	}, 1718773640123000000)
-
-	f("time", []logstorage.Field{
-		{Name: "time", Value: "2024-06-18T23:37:20.123456789-05:30"},
-		{Name: "foo", Value: "bar"},
-	}, 1718773640123456789)
-}
-
-func TestExtractTimestampRFC3339NanoFromFields_Error(t *testing.T) {
-	f := func(s string) {
-		t.Helper()
-
-		fields := []logstorage.Field{
-			{Name: "time", Value: s},
-		}
-		nsecs, err := ExtractTimestampRFC3339NanoFromFields("time", fields)
-		if err == nil {
-			t.Fatalf("expecting non-nil error")
-		}
-		if nsecs != 0 {
-			t.Fatalf("unexpected nsecs; got %d; want %d", nsecs, 0)
-		}
-	}
-
-	f("foobar")
-
-	// no Z at the end
-	f("2024-06-18T23:37:20")
-
-	// incomplete time
-	f("2024-06-18")
-	f("2024-06-18T23:37")
-}

app/vlinsert/jsonline/jsonline.go

@@ -4,7 +4,6 @@ import (
 	"bufio"
 	"errors"
 	"fmt"
-	"io"
 	"net/http"
 	"time"
 
@@ -13,6 +12,7 @@ import (
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/bytesutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logjson"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/protoparser/common"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/writeconcurrencylimiter"
@@ -20,13 +20,12 @@ import (
 )
 
 // RequestHandler processes jsonline insert requests
-func RequestHandler(w http.ResponseWriter, r *http.Request) {
-	startTime := time.Now()
+func RequestHandler(w http.ResponseWriter, r *http.Request) bool {
 	w.Header().Add("Content-Type", "application/json")
 
 	if r.Method != "POST" {
 		w.WriteHeader(http.StatusMethodNotAllowed)
-		return
+		return true
 	}
 
 	requestsTotal.Inc()
@@ -34,40 +33,23 @@ func RequestHandler(w http.ResponseWriter, r *http.Request) {
 	cp, err := insertutils.GetCommonParams(r)
 	if err != nil {
 		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-	if err := vlstorage.CanWriteData(); err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
+		return true
 	}
+	lr := logstorage.GetLogRows(cp.StreamFields, cp.IgnoreFields)
+	processLogMessage := cp.GetProcessLogMessageFunc(lr)
 
 	reader := r.Body
 	if r.Header.Get("Content-Encoding") == "gzip" {
 		zr, err := common.GetGzipReader(reader)
 		if err != nil {
-			logger.Errorf("cannot read gzipped jsonline request: %s", err)
-			return
+			logger.Errorf("cannot read gzipped _bulk request: %s", err)
+			return true
 		}
 		defer common.PutGzipReader(zr)
 		reader = zr
 	}
 
-	lmp := cp.NewLogMessageProcessor()
-	err = processStreamInternal(reader, cp.TimeField, cp.MsgField, lmp)
-	lmp.MustClose()
-
-	if err != nil {
-		logger.Errorf("jsonline: %s", err)
-	} else {
-		// update requestDuration only for successfully parsed requests.
-		// There is no need in updating requestDuration for request errors,
-		// since their timings are usually much smaller than the timing for successful request parsing.
-		requestDuration.UpdateDuration(startTime)
-	}
-}
-
-func processStreamInternal(r io.Reader, timeField, msgField string, lmp insertutils.LogMessageProcessor) error {
-	wcr := writeconcurrencylimiter.GetReader(r)
+	wcr := writeconcurrencylimiter.GetReader(reader)
 	defer writeconcurrencylimiter.PutReader(wcr)
 
 	lb := lineBufferPool.Get()
@@ -79,21 +61,26 @@ func processStreamInternal(r io.Reader, timeField, msgField string, lmp insertut
 
 	n := 0
 	for {
-		ok, err := readLine(sc, timeField, msgField, lmp)
+		ok, err := readLine(sc, cp.TimeField, cp.MsgField, processLogMessage)
 		wcr.DecConcurrency()
 		if err != nil {
-			errorsTotal.Inc()
-			return fmt.Errorf("cannot read line #%d in /jsonline request: %s", n, err)
+			logger.Errorf("cannot read line #%d in /jsonline request: %s", n, err)
+			break
 		}
 		if !ok {
-			return nil
+			break
 		}
 		n++
 		rowsIngestedTotal.Inc()
 	}
+
+	vlstorage.MustAddRows(lr)
+	logstorage.PutLogRows(lr)
+
+	return true
 }
 
-func readLine(sc *bufio.Scanner, timeField, msgField string, lmp insertutils.LogMessageProcessor) (bool, error) {
+func readLine(sc *bufio.Scanner, timeField, msgField string, processLogMessage func(timestamp int64, fields []logstorage.Field)) (bool, error) {
 	var line []byte
 	for len(line) == 0 {
 		if !sc.Scan() {
@@ -108,28 +95,55 @@ func readLine(sc *bufio.Scanner, timeField, msgField string, lmp insertutils.Log
 		line = sc.Bytes()
 	}
 
-	p := logstorage.GetJSONParser()
+	p := logjson.GetParser()
 	if err := p.ParseLogMessage(line); err != nil {
 		return false, fmt.Errorf("cannot parse json-encoded log entry: %w", err)
 	}
-	ts, err := insertutils.ExtractTimestampRFC3339NanoFromFields(timeField, p.Fields)
+	ts, err := extractTimestampFromFields(timeField, p.Fields)
 	if err != nil {
-		return false, fmt.Errorf("cannot get timestamp: %w", err)
+		return false, fmt.Errorf("cannot parse timestamp: %w", err)
 	}
-	logstorage.RenameField(p.Fields, msgField, "_msg")
-	lmp.AddRow(ts, p.Fields)
-	logstorage.PutJSONParser(p)
-
+	if ts == 0 {
+		ts = time.Now().UnixNano()
+	}
+	p.RenameField(msgField, "_msg")
+	processLogMessage(ts, p.Fields)
+	logjson.PutParser(p)
 	return true, nil
 }
 
+func extractTimestampFromFields(timeField string, fields []logstorage.Field) (int64, error) {
+	for i := range fields {
+		f := &fields[i]
+		if f.Name != timeField {
+			continue
+		}
+		timestamp, err := parseISO8601Timestamp(f.Value)
+		if err != nil {
+			return 0, err
+		}
+		f.Value = ""
+		return timestamp, nil
+	}
+	return 0, nil
+}
+
+func parseISO8601Timestamp(s string) (int64, error) {
+	if s == "0" || s == "" {
+		// Special case for returning the current timestamp.
+		// It must be automatically converted to the current timestamp by the caller.
+		return 0, nil
+	}
+	t, err := time.Parse(time.RFC3339, s)
+	if err != nil {
+		return 0, fmt.Errorf("cannot parse timestamp %q: %w", s, err)
+	}
+	return t.UnixNano(), nil
+}
+
 var lineBufferPool bytesutil.ByteBufferPool
 
 var (
+	requestsTotal     = metrics.NewCounter(`vl_http_requests_total{path="/insert/jsonline"}`)
 	rowsIngestedTotal = metrics.NewCounter(`vl_rows_ingested_total{type="jsonline"}`)
-
-	requestsTotal = metrics.NewCounter(`vl_http_requests_total{path="/insert/jsonline"}`)
-	errorsTotal   = metrics.NewCounter(`vl_http_errors_total{path="/insert/jsonline"}`)
-
-	requestDuration = metrics.NewHistogram(`vl_http_request_duration_seconds{path="/insert/jsonline"}`)
 )

app/vlinsert/jsonline/jsonline_test.go

@@ -1,27 +1,59 @@
 package jsonline
 
 import (
+	"bufio"
 	"bytes"
+	"fmt"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
+	"reflect"
+	"strings"
 	"testing"
-
-	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlinsert/insertutils"
 )
 
-func TestProcessStreamInternal_Success(t *testing.T) {
+func TestReadBulkRequestSuccess(t *testing.T) {
 	f := func(data, timeField, msgField string, rowsExpected int, timestampsExpected []int64, resultExpected string) {
 		t.Helper()
 
-		tlp := &insertutils.TestLogMessageProcessor{}
-		r := bytes.NewBufferString(data)
-		if err := processStreamInternal(r, timeField, msgField, tlp); err != nil {
-			t.Fatalf("unexpected error: %s", err)
+		var timestamps []int64
+		var result string
+		processLogMessage := func(timestamp int64, fields []logstorage.Field) {
+			timestamps = append(timestamps, timestamp)
+
+			a := make([]string, len(fields))
+			for i, f := range fields {
+				a[i] = fmt.Sprintf("%q:%q", f.Name, f.Value)
+			}
+			s := "{" + strings.Join(a, ",") + "}\n"
+			result += s
 		}
 
-		if err := tlp.Verify(rowsExpected, timestampsExpected, resultExpected); err != nil {
-			t.Fatal(err)
+		// Read the request without compression
+		r := bytes.NewBufferString(data)
+		sc := bufio.NewScanner(r)
+		rows := 0
+		for {
+			ok, err := readLine(sc, timeField, msgField, processLogMessage)
+			if err != nil {
+				t.Fatalf("unexpected error: %s", err)
+			}
+			if !ok {
+				break
+			}
+			rows++
+		}
+		if rows != rowsExpected {
+			t.Fatalf("unexpected rows read; got %d; want %d", rows, rowsExpected)
+		}
+
+		if !reflect.DeepEqual(timestamps, timestampsExpected) {
+			t.Fatalf("unexpected timestamps;\ngot\n%d\nwant\n%d", timestamps, timestampsExpected)
+		}
+		if result != resultExpected {
+			t.Fatalf("unexpected result;\ngot\n%s\nwant\n%s", result, resultExpected)
 		}
 	}
 
+	// Verify non-empty data
 	data := `{"@timestamp":"2023-06-06T04:48:11.735Z","log":{"offset":71770,"file":{"path":"/var/log/auth.log"}},"message":"foobar"}
 {"@timestamp":"2023-06-06T04:48:12.735Z","message":"baz"}
 {"message":"xyz","@timestamp":"2023-06-06T04:48:13.735Z","x":"y"}
@@ -32,24 +64,7 @@ func TestProcessStreamInternal_Success(t *testing.T) {
 	timestampsExpected := []int64{1686026891735000000, 1686026892735000000, 1686026893735000000}
 	resultExpected := `{"@timestamp":"","log.offset":"71770","log.file.path":"/var/log/auth.log","_msg":"foobar"}
 {"@timestamp":"","_msg":"baz"}
-{"_msg":"xyz","@timestamp":"","x":"y"}`
+{"_msg":"xyz","@timestamp":"","x":"y"}
+`
 	f(data, timeField, msgField, rowsExpected, timestampsExpected, resultExpected)
 }
-
-func TestProcessStreamInternal_Failure(t *testing.T) {
-	f := func(data string) {
-		t.Helper()
-
-		tlp := &insertutils.TestLogMessageProcessor{}
-		r := bytes.NewBufferString(data)
-		if err := processStreamInternal(r, "time", "", tlp); err == nil {
-			t.Fatalf("expecting non-nil error")
-		}
-	}
-
-	// invalid json
-	f("foobar")
-
-	// invalid timestamp field
-	f(`{"time":"foobar"}`)
-}

app/vlinsert/loki/loki.go

@@ -5,33 +5,30 @@ import (
 
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlinsert/insertutils"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
+	"github.com/VictoriaMetrics/metrics"
+)
+
+var (
+	lokiRequestsJSONTotal     = metrics.NewCounter(`vl_http_requests_total{path="/insert/loki/api/v1/push",format="json"}`)
+	lokiRequestsProtobufTotal = metrics.NewCounter(`vl_http_requests_total{path="/insert/loki/api/v1/push",format="protobuf"}`)
 )
 
 // RequestHandler processes Loki insert requests
+//
+// See https://grafana.com/docs/loki/latest/api/#push-log-entries-to-loki
 func RequestHandler(path string, w http.ResponseWriter, r *http.Request) bool {
-	switch path {
-	case "/api/v1/push":
-		handleInsert(r, w)
-		return true
-	case "/ready":
-		// See https://grafana.com/docs/loki/latest/api/#identify-ready-loki-instance
-		w.WriteHeader(http.StatusOK)
-		w.Write([]byte("ready"))
-		return true
-	default:
+	if path != "/api/v1/push" {
 		return false
 	}
-}
-
-// See https://grafana.com/docs/loki/latest/api/#push-log-entries-to-loki
-func handleInsert(r *http.Request, w http.ResponseWriter) {
 	contentType := r.Header.Get("Content-Type")
 	switch contentType {
 	case "application/json":
-		handleJSON(r, w)
+		lokiRequestsJSONTotal.Inc()
+		return handleJSON(r, w)
 	default:
-		// Protobuf request body should be handled by default according to https://grafana.com/docs/loki/latest/api/#push-log-entries-to-loki
-		handleProtobuf(r, w)
+		// Protobuf request body should be handled by default accoring to https://grafana.com/docs/loki/latest/api/#push-log-entries-to-loki
+		lokiRequestsProtobufTotal.Inc()
+		return handleProtobuf(r, w)
 	}
 }
 
@@ -46,7 +43,7 @@ func getCommonParams(r *http.Request) (*insertutils.CommonParams, error) {
 	if cp.TenantID.AccountID == 0 && cp.TenantID.ProjectID == 0 {
 		org := r.Header.Get("X-Scope-OrgID")
 		if org != "" {
-			tenantID, err := logstorage.ParseTenantID(org)
+			tenantID, err := logstorage.GetTenantIDFromString(org)
 			if err != nil {
 				return nil, err
 			}

app/vlinsert/loki/loki_json.go

@@ -8,7 +8,6 @@ import (
 	"strconv"
 	"time"
 
-	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlinsert/insertutils"
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlstorage"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/bytesutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
@@ -19,17 +18,18 @@ import (
 	"github.com/valyala/fastjson"
 )
 
-var parserPool fastjson.ParserPool
+var (
+	rowsIngestedJSONTotal = metrics.NewCounter(`vl_rows_ingested_total{type="loki",format="json"}`)
+	parserPool            fastjson.ParserPool
+)
 
-func handleJSON(r *http.Request, w http.ResponseWriter) {
-	startTime := time.Now()
-	requestsJSONTotal.Inc()
+func handleJSON(r *http.Request, w http.ResponseWriter) bool {
 	reader := r.Body
 	if r.Header.Get("Content-Encoding") == "gzip" {
 		zr, err := common.GetGzipReader(reader)
 		if err != nil {
 			httpserver.Errorf(w, r, "cannot initialize gzip reader: %s", err)
-			return
+			return true
 		}
 		defer common.PutGzipReader(zr)
 		reader = zr
@@ -40,41 +40,28 @@ func handleJSON(r *http.Request, w http.ResponseWriter) {
 	writeconcurrencylimiter.PutReader(wcr)
 	if err != nil {
 		httpserver.Errorf(w, r, "cannot read request body: %s", err)
-		return
+		return true
 	}
 
 	cp, err := getCommonParams(r)
 	if err != nil {
 		httpserver.Errorf(w, r, "cannot parse common params from request: %s", err)
-		return
+		return true
 	}
-	if err := vlstorage.CanWriteData(); err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-	lmp := cp.NewLogMessageProcessor()
-	n, err := parseJSONRequest(data, lmp)
-	lmp.MustClose()
+	lr := logstorage.GetLogRows(cp.StreamFields, cp.IgnoreFields)
+	processLogMessage := cp.GetProcessLogMessageFunc(lr)
+	n, err := parseJSONRequest(data, processLogMessage)
+	vlstorage.MustAddRows(lr)
+	logstorage.PutLogRows(lr)
 	if err != nil {
-		httpserver.Errorf(w, r, "cannot parse Loki json request: %s", err)
-		return
+		httpserver.Errorf(w, r, "cannot parse Loki request: %s", err)
+		return true
 	}
-
 	rowsIngestedJSONTotal.Add(n)
-
-	// update requestJSONDuration only for successfully parsed requests
-	// There is no need in updating requestJSONDuration for request errors,
-	// since their timings are usually much smaller than the timing for successful request parsing.
-	requestJSONDuration.UpdateDuration(startTime)
+	return true
 }
 
-var (
-	requestsJSONTotal     = metrics.NewCounter(`vl_http_requests_total{path="/insert/loki/api/v1/push",format="json"}`)
-	rowsIngestedJSONTotal = metrics.NewCounter(`vl_rows_ingested_total{type="loki",format="json"}`)
-	requestJSONDuration   = metrics.NewHistogram(`vl_http_request_duration_seconds{path="/insert/loki/api/v1/push",format="json"}`)
-)
-
-func parseJSONRequest(data []byte, lmp insertutils.LogMessageProcessor) (int, error) {
+func parseJSONRequest(data []byte, processLogMessage func(timestamp int64, fields []logstorage.Field)) (int, error) {
 	p := parserPool.Get()
 	defer parserPool.Put(p)
 	v, err := p.ParseBytes(data)
@@ -167,7 +154,8 @@ func parseJSONRequest(data []byte, lmp insertutils.LogMessageProcessor) (int, er
 				Name:  "_msg",
 				Value: bytesutil.ToUnsafeString(msg),
 			})
-			lmp.AddRow(ts, fields)
+			processLogMessage(ts, fields)
+
 		}
 		rowsIngested += len(lines)
 	}

app/vlinsert/loki/loki_json_test.go

@@ -1,17 +1,19 @@
 package loki
 
 import (
+	"fmt"
+	"strings"
 	"testing"
 
-	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlinsert/insertutils"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
 )
 
-func TestParseJSONRequest_Failure(t *testing.T) {
+func TestParseJSONRequestFailure(t *testing.T) {
 	f := func(s string) {
 		t.Helper()
-
-		tlp := &insertutils.TestLogMessageProcessor{}
-		n, err := parseJSONRequest([]byte(s), tlp)
+		n, err := parseJSONRequest([]byte(s), func(_ int64, _ []logstorage.Field) {
+			t.Fatalf("unexpected call to parseJSONRequest callback!")
+		})
 		if err == nil {
 			t.Fatalf("expecting non-nil error")
 		}
@@ -54,30 +56,39 @@ func TestParseJSONRequest_Failure(t *testing.T) {
 	f(`{"streams":[{"values":[["123",1234]]}]}`)
 }
 
-func TestParseJSONRequest_Success(t *testing.T) {
-	f := func(s string, timestampsExpected []int64, resultExpected string) {
+func TestParseJSONRequestSuccess(t *testing.T) {
+	f := func(s string, resultExpected string) {
 		t.Helper()
-
-		tlp := &insertutils.TestLogMessageProcessor{}
-
-		n, err := parseJSONRequest([]byte(s), tlp)
+		var lines []string
+		n, err := parseJSONRequest([]byte(s), func(timestamp int64, fields []logstorage.Field) {
+			var a []string
+			for _, f := range fields {
+				a = append(a, f.String())
+			}
+			line := fmt.Sprintf("_time:%d %s", timestamp, strings.Join(a, " "))
+			lines = append(lines, line)
+		})
 		if err != nil {
 			t.Fatalf("unexpected error: %s", err)
 		}
-		if err := tlp.Verify(n, timestampsExpected, resultExpected); err != nil {
-			t.Fatal(err)
+		if n != len(lines) {
+			t.Fatalf("unexpected number of lines parsed; got %d; want %d", n, len(lines))
+		}
+		result := strings.Join(lines, "\n")
+		if result != resultExpected {
+			t.Fatalf("unexpected result;\ngot\n%s\nwant\n%s", result, resultExpected)
 		}
 	}
 
 	// Empty streams
-	f(`{"streams":[]}`, nil, ``)
-	f(`{"streams":[{"values":[]}]}`, nil, ``)
-	f(`{"streams":[{"stream":{},"values":[]}]}`, nil, ``)
-	f(`{"streams":[{"stream":{"foo":"bar"},"values":[]}]}`, nil, ``)
+	f(`{"streams":[]}`, ``)
+	f(`{"streams":[{"values":[]}]}`, ``)
+	f(`{"streams":[{"stream":{},"values":[]}]}`, ``)
+	f(`{"streams":[{"stream":{"foo":"bar"},"values":[]}]}`, ``)
 
 	// Empty stream labels
-	f(`{"streams":[{"values":[["1577836800000000001", "foo bar"]]}]}`, []int64{1577836800000000001}, `{"_msg":"foo bar"}`)
-	f(`{"streams":[{"stream":{},"values":[["1577836800000000001", "foo bar"]]}]}`, []int64{1577836800000000001}, `{"_msg":"foo bar"}`)
+	f(`{"streams":[{"values":[["1577836800000000001", "foo bar"]]}]}`, `_time:1577836800000000001 "_msg":"foo bar"`)
+	f(`{"streams":[{"stream":{},"values":[["1577836800000000001", "foo bar"]]}]}`, `_time:1577836800000000001 "_msg":"foo bar"`)
 
 	// Non-empty stream labels
 	f(`{"streams":[{"stream":{
@@ -87,9 +98,9 @@ func TestParseJSONRequest_Success(t *testing.T) {
 	["1577836800000000001", "foo bar"],
 	["1477836900005000002", "abc"],
 	["147.78369e9", "foobar"]
-]}]}`, []int64{1577836800000000001, 1477836900005000002, 147783690000}, `{"label1":"value1","label2":"value2","_msg":"foo bar"}
-{"label1":"value1","label2":"value2","_msg":"abc"}
-{"label1":"value1","label2":"value2","_msg":"foobar"}`)
+]}]}`, `_time:1577836800000000001 "label1":"value1" "label2":"value2" "_msg":"foo bar"
+_time:1477836900005000002 "label1":"value1" "label2":"value2" "_msg":"abc"
+_time:147783690000 "label1":"value1" "label2":"value2" "_msg":"foobar"`)
 
 	// Multiple streams
 	f(`{
@@ -113,7 +124,7 @@ func TestParseJSONRequest_Success(t *testing.T) {
 			]
 		}
 	]
-}`, []int64{1577836800000000001, 1577836900005000002, 1877836900005000002}, `{"foo":"bar","a":"b","_msg":"foo bar"}
-{"foo":"bar","a":"b","_msg":"abc"}
-{"x":"y","_msg":"yx"}`)
+}`, `_time:1577836800000000001 "foo":"bar" "a":"b" "_msg":"foo bar"
+_time:1577836900005000002 "foo":"bar" "a":"b" "_msg":"abc"
+_time:1877836900005000002 "x":"y" "_msg":"yx"`)
 }

app/vlinsert/loki/loki_json_timing_test.go

@@ -6,7 +6,7 @@ import (
 	"testing"
 	"time"
 
-	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlinsert/insertutils"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
 )
 
 func BenchmarkParseJSONRequest(b *testing.B) {
@@ -22,15 +22,14 @@ func BenchmarkParseJSONRequest(b *testing.B) {
 }
 
 func benchmarkParseJSONRequest(b *testing.B, streams, rows, labels int) {
-	blp := &insertutils.BenchmarkLogMessageProcessor{}
 	b.ReportAllocs()
 	b.SetBytes(int64(streams * rows))
 	b.RunParallel(func(pb *testing.PB) {
 		data := getJSONBody(streams, rows, labels)
 		for pb.Next() {
-			_, err := parseJSONRequest(data, blp)
+			_, err := parseJSONRequest(data, func(_ int64, _ []logstorage.Field) {})
 			if err != nil {
-				panic(fmt.Errorf("unexpected error: %w", err))
+				panic(fmt.Errorf("unexpected error: %s", err))
 			}
 		}
 	})

app/vlinsert/loki/loki_protobuf.go

@@ -9,7 +9,6 @@ import (
 	"sync"
 	"time"
 
-	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlinsert/insertutils"
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlstorage"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/bytesutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
@@ -20,53 +19,39 @@ import (
 )
 
 var (
-	bytesBufPool bytesutil.ByteBufferPool
-	pushReqsPool sync.Pool
+	rowsIngestedProtobufTotal = metrics.NewCounter(`vl_rows_ingested_total{type="loki",format="protobuf"}`)
+	bytesBufPool              bytesutil.ByteBufferPool
+	pushReqsPool              sync.Pool
 )
 
-func handleProtobuf(r *http.Request, w http.ResponseWriter) {
-	startTime := time.Now()
-	requestsProtobufTotal.Inc()
+func handleProtobuf(r *http.Request, w http.ResponseWriter) bool {
 	wcr := writeconcurrencylimiter.GetReader(r.Body)
 	data, err := io.ReadAll(wcr)
 	writeconcurrencylimiter.PutReader(wcr)
 	if err != nil {
 		httpserver.Errorf(w, r, "cannot read request body: %s", err)
-		return
+		return true
 	}
 
 	cp, err := getCommonParams(r)
 	if err != nil {
 		httpserver.Errorf(w, r, "cannot parse common params from request: %s", err)
-		return
+		return true
 	}
-	if err := vlstorage.CanWriteData(); err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-	lmp := cp.NewLogMessageProcessor()
-	n, err := parseProtobufRequest(data, lmp)
-	lmp.MustClose()
+	lr := logstorage.GetLogRows(cp.StreamFields, cp.IgnoreFields)
+	processLogMessage := cp.GetProcessLogMessageFunc(lr)
+	n, err := parseProtobufRequest(data, processLogMessage)
+	vlstorage.MustAddRows(lr)
+	logstorage.PutLogRows(lr)
 	if err != nil {
-		httpserver.Errorf(w, r, "cannot parse Loki protobuf request: %s", err)
-		return
+		httpserver.Errorf(w, r, "cannot parse loki request: %s", err)
+		return true
 	}
-
 	rowsIngestedProtobufTotal.Add(n)
-
-	// update requestProtobufDuration only for successfully parsed requests
-	// There is no need in updating requestProtobufDuration for request errors,
-	// since their timings are usually much smaller than the timing for successful request parsing.
-	requestProtobufDuration.UpdateDuration(startTime)
+	return true
 }
 
-var (
-	requestsProtobufTotal     = metrics.NewCounter(`vl_http_requests_total{path="/insert/loki/api/v1/push",format="protobuf"}`)
-	rowsIngestedProtobufTotal = metrics.NewCounter(`vl_rows_ingested_total{type="loki",format="protobuf"}`)
-	requestProtobufDuration   = metrics.NewHistogram(`vl_http_request_duration_seconds{path="/insert/loki/api/v1/push",format="protobuf"}`)
-)
-
-func parseProtobufRequest(data []byte, lmp insertutils.LogMessageProcessor) (int, error) {
+func parseProtobufRequest(data []byte, processLogMessage func(timestamp int64, fields []logstorage.Field)) (int, error) {
 	bb := bytesBufPool.Get()
 	defer bytesBufPool.Put(bb)
 
@@ -79,14 +64,12 @@ func parseProtobufRequest(data []byte, lmp insertutils.LogMessageProcessor) (int
 	req := getPushRequest()
 	defer putPushRequest(req)
 
-	err = req.UnmarshalProtobuf(bb.B)
+	err = req.Unmarshal(bb.B)
 	if err != nil {
-		return 0, fmt.Errorf("cannot parse request body: %w", err)
+		return 0, fmt.Errorf("cannot parse request body: %s", err)
 	}
 
-	fields := getFields()
-	defer putFields(fields)
-
+	var commonFields []logstorage.Field
 	rowsIngested := 0
 	streams := req.Streams
 	currentTimestamp := time.Now().UnixNano()
@@ -94,60 +77,30 @@ func parseProtobufRequest(data []byte, lmp insertutils.LogMessageProcessor) (int
 		stream := &streams[i]
 		// st.Labels contains labels for the stream.
 		// Labels are same for all entries in the stream.
-		fields.fields, err = parsePromLabels(fields.fields[:0], stream.Labels)
+		commonFields, err = parsePromLabels(commonFields[:0], stream.Labels)
 		if err != nil {
-			return rowsIngested, fmt.Errorf("cannot parse stream labels %q: %w", stream.Labels, err)
+			return rowsIngested, fmt.Errorf("cannot parse stream labels %q: %s", stream.Labels, err)
 		}
-		commonFieldsLen := len(fields.fields)
+		fields := commonFields
 
 		entries := stream.Entries
 		for j := range entries {
-			e := &entries[j]
-			fields.fields = fields.fields[:commonFieldsLen]
-
-			for _, lp := range e.StructuredMetadata {
-				fields.fields = append(fields.fields, logstorage.Field{
-					Name:  lp.Name,
-					Value: lp.Value,
-				})
-			}
-
-			fields.fields = append(fields.fields, logstorage.Field{
+			entry := &entries[j]
+			fields = append(fields[:len(commonFields)], logstorage.Field{
 				Name:  "_msg",
-				Value: e.Line,
+				Value: entry.Line,
 			})
-
-			ts := e.Timestamp.UnixNano()
+			ts := entry.Timestamp.UnixNano()
 			if ts == 0 {
 				ts = currentTimestamp
 			}
-
-			lmp.AddRow(ts, fields.fields)
+			processLogMessage(ts, fields)
 		}
 		rowsIngested += len(stream.Entries)
 	}
 	return rowsIngested, nil
 }
 
-func getFields() *fields {
-	v := fieldsPool.Get()
-	if v == nil {
-		return &fields{}
-	}
-	return v.(*fields)
-}
-
-func putFields(f *fields) {
-	f.fields = f.fields[:0]
-	fieldsPool.Put(f)
-}
-
-var fieldsPool sync.Pool
-
-type fields struct {
-	fields []logstorage.Field
-}
-
 // parsePromLabels parses log fields in Prometheus text exposition format from s, appends them to dst and returns the result.
 //
 // See test data of promtail for examples: https://github.com/grafana/loki/blob/a24ef7b206e0ca63ee74ca6ecb0a09b745cd2258/pkg/push/types_test.go
@@ -213,6 +166,6 @@ func getPushRequest() *PushRequest {
 }
 
 func putPushRequest(req *PushRequest) {
-	req.reset()
+	req.Reset()
 	pushReqsPool.Put(req)
 }

app/vlinsert/loki/loki_protobuf_test.go

@@ -6,80 +6,83 @@ import (
 	"testing"
 	"time"
 
-	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlinsert/insertutils"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
 	"github.com/golang/snappy"
 )
 
-type testLogMessageProcessor struct {
-	pr PushRequest
-}
-
-func (tlp *testLogMessageProcessor) AddRow(timestamp int64, fields []logstorage.Field) {
-	msg := ""
-	for _, f := range fields {
-		if f.Name == "_msg" {
-			msg = f.Value
-		}
-	}
-	var a []string
-	for _, f := range fields {
-		if f.Name == "_msg" {
-			continue
-		}
-		item := fmt.Sprintf("%s=%q", f.Name, f.Value)
-		a = append(a, item)
-	}
-	labels := "{" + strings.Join(a, ", ") + "}"
-	tlp.pr.Streams = append(tlp.pr.Streams, Stream{
-		Labels: labels,
-		Entries: []Entry{
-			{
-				Timestamp: time.Unix(0, timestamp),
-				Line:      strings.Clone(msg),
-			},
-		},
-	})
-}
-
-func (tlp *testLogMessageProcessor) MustClose() {
-}
-
-func TestParseProtobufRequest_Success(t *testing.T) {
-	f := func(s string, timestampsExpected []int64, resultExpected string) {
+func TestParseProtobufRequestSuccess(t *testing.T) {
+	f := func(s string, resultExpected string) {
 		t.Helper()
-
-		tlp := &testLogMessageProcessor{}
-		n, err := parseJSONRequest([]byte(s), tlp)
+		var pr PushRequest
+		n, err := parseJSONRequest([]byte(s), func(timestamp int64, fields []logstorage.Field) {
+			msg := ""
+			for _, f := range fields {
+				if f.Name == "_msg" {
+					msg = f.Value
+				}
+			}
+			var a []string
+			for _, f := range fields {
+				if f.Name == "_msg" {
+					continue
+				}
+				item := fmt.Sprintf("%s=%q", f.Name, f.Value)
+				a = append(a, item)
+			}
+			labels := "{" + strings.Join(a, ", ") + "}"
+			pr.Streams = append(pr.Streams, Stream{
+				Labels: labels,
+				Entries: []Entry{
+					{
+						Timestamp: time.Unix(0, timestamp),
+						Line:      msg,
+					},
+				},
+			})
+		})
 		if err != nil {
 			t.Fatalf("unexpected error: %s", err)
 		}
-		if n != len(tlp.pr.Streams) {
-			t.Fatalf("unexpected number of streams; got %d; want %d", len(tlp.pr.Streams), n)
+		if n != len(pr.Streams) {
+			t.Fatalf("unexpected number of streams; got %d; want %d", len(pr.Streams), n)
 		}
 
-		data := tlp.pr.MarshalProtobuf(nil)
+		data, err := pr.Marshal()
+		if err != nil {
+			t.Fatalf("unexpected error when marshaling PushRequest: %s", err)
+		}
 		encodedData := snappy.Encode(nil, data)
 
-		tlp2 := &insertutils.TestLogMessageProcessor{}
-		n, err = parseProtobufRequest(encodedData, tlp2)
+		var lines []string
+		n, err = parseProtobufRequest(encodedData, func(timestamp int64, fields []logstorage.Field) {
+			var a []string
+			for _, f := range fields {
+				a = append(a, f.String())
+			}
+			line := fmt.Sprintf("_time:%d %s", timestamp, strings.Join(a, " "))
+			lines = append(lines, line)
+		})
 		if err != nil {
 			t.Fatalf("unexpected error: %s", err)
 		}
-		if err := tlp2.Verify(n, timestampsExpected, resultExpected); err != nil {
-			t.Fatal(err)
+		if n != len(lines) {
+			t.Fatalf("unexpected number of lines parsed; got %d; want %d", n, len(lines))
+		}
+		result := strings.Join(lines, "\n")
+		if result != resultExpected {
+			t.Fatalf("unexpected result;\ngot\n%s\nwant\n%s", result, resultExpected)
 		}
 	}
 
 	// Empty streams
-	f(`{"streams":[]}`, nil, ``)
-	f(`{"streams":[{"values":[]}]}`, nil, ``)
-	f(`{"streams":[{"stream":{},"values":[]}]}`, nil, ``)
-	f(`{"streams":[{"stream":{"foo":"bar"},"values":[]}]}`, nil, ``)
+	f(`{"streams":[]}`, ``)
+	f(`{"streams":[{"values":[]}]}`, ``)
+	f(`{"streams":[{"stream":{},"values":[]}]}`, ``)
+	f(`{"streams":[{"stream":{"foo":"bar"},"values":[]}]}`, ``)
 
 	// Empty stream labels
-	f(`{"streams":[{"values":[["1577836800000000001", "foo bar"]]}]}`, []int64{1577836800000000001}, `{"_msg":"foo bar"}`)
-	f(`{"streams":[{"stream":{},"values":[["1577836800000000001", "foo bar"]]}]}`, []int64{1577836800000000001}, `{"_msg":"foo bar"}`)
+	f(`{"streams":[{"values":[["1577836800000000001", "foo bar"]]}]}`, `_time:1577836800000000001 "_msg":"foo bar"`)
+	f(`{"streams":[{"stream":{},"values":[["1577836800000000001", "foo bar"]]}]}`, `_time:1577836800000000001 "_msg":"foo bar"`)
 
 	// Non-empty stream labels
 	f(`{"streams":[{"stream":{
@@ -89,9 +92,9 @@ func TestParseProtobufRequest_Success(t *testing.T) {
 	["1577836800000000001", "foo bar"],
 	["1477836900005000002", "abc"],
 	["147.78369e9", "foobar"]
-]}]}`, []int64{1577836800000000001, 1477836900005000002, 147783690000}, `{"label1":"value1","label2":"value2","_msg":"foo bar"}
-{"label1":"value1","label2":"value2","_msg":"abc"}
-{"label1":"value1","label2":"value2","_msg":"foobar"}`)
+]}]}`, `_time:1577836800000000001 "label1":"value1" "label2":"value2" "_msg":"foo bar"
+_time:1477836900005000002 "label1":"value1" "label2":"value2" "_msg":"abc"
+_time:147783690000 "label1":"value1" "label2":"value2" "_msg":"foobar"`)
 
 	// Multiple streams
 	f(`{
@@ -115,12 +118,12 @@ func TestParseProtobufRequest_Success(t *testing.T) {
 			]
 		}
 	]
-}`, []int64{1577836800000000001, 1577836900005000002, 1877836900005000002}, `{"foo":"bar","a":"b","_msg":"foo bar"}
-{"foo":"bar","a":"b","_msg":"abc"}
-{"x":"y","_msg":"yx"}`)
+}`, `_time:1577836800000000001 "foo":"bar" "a":"b" "_msg":"foo bar"
+_time:1577836900005000002 "foo":"bar" "a":"b" "_msg":"abc"
+_time:1877836900005000002 "x":"y" "_msg":"yx"`)
 }
 
-func TestParsePromLabels_Success(t *testing.T) {
+func TestParsePromLabelsSuccess(t *testing.T) {
 	f := func(s string) {
 		t.Helper()
 		fields, err := parsePromLabels(nil, s)
@@ -144,7 +147,7 @@ func TestParsePromLabels_Success(t *testing.T) {
 	f(`{foo="ba\"r\\z\n", a="", b="\"\\"}`)
 }
 
-func TestParsePromLabels_Failure(t *testing.T) {
+func TestParsePromLabelsFailure(t *testing.T) {
 	f := func(s string) {
 		t.Helper()
 		fields, err := parsePromLabels(nil, s)

app/vlinsert/loki/loki_protobuf_timing_test.go

@@ -6,10 +6,8 @@ import (
 	"testing"
 	"time"
 
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
 	"github.com/golang/snappy"
-
-	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlinsert/insertutils"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/bytesutil"
 )
 
 func BenchmarkParseProtobufRequest(b *testing.B) {
@@ -25,61 +23,42 @@ func BenchmarkParseProtobufRequest(b *testing.B) {
 }
 
 func benchmarkParseProtobufRequest(b *testing.B, streams, rows, labels int) {
-	blp := &insertutils.BenchmarkLogMessageProcessor{}
 	b.ReportAllocs()
 	b.SetBytes(int64(streams * rows))
 	b.RunParallel(func(pb *testing.PB) {
 		body := getProtobufBody(streams, rows, labels)
 		for pb.Next() {
-			_, err := parseProtobufRequest(body, blp)
+			_, err := parseProtobufRequest(body, func(_ int64, _ []logstorage.Field) {})
 			if err != nil {
-				panic(fmt.Errorf("unexpected error: %w", err))
+				panic(fmt.Errorf("unexpected error: %s", err))
 			}
 		}
 	})
 }
 
-func getProtobufBody(streamsCount, rowsCount, labelsCount int) []byte {
-	var b []byte
-	var entries []Entry
-	streams := make([]Stream, streamsCount)
-	for i := range streams {
-		b = b[:0]
-		b = append(b, '{')
-		for j := 0; j < labelsCount; j++ {
-			b = append(b, "label_"...)
-			b = strconv.AppendInt(b, int64(j), 10)
-			b = append(b, `="value_`...)
-			b = strconv.AppendInt(b, int64(j), 10)
-			b = append(b, '"')
-			if j < labelsCount-1 {
-				b = append(b, ',')
+func getProtobufBody(streams, rows, labels int) []byte {
+	var pr PushRequest
+
+	for i := 0; i < streams; i++ {
+		var st Stream
+
+		st.Labels = `{`
+		for j := 0; j < labels; j++ {
+			st.Labels += `label_` + strconv.Itoa(j) + `="value_` + strconv.Itoa(j) + `"`
+			if j < labels-1 {
+				st.Labels += `,`
 			}
 		}
-		b = append(b, '}')
-		labels := string(b)
+		st.Labels += `}`
 
-		var rowsBuf []byte
-		entriesLen := len(entries)
-		for j := 0; j < rowsCount; j++ {
-			rowsBufLen := len(rowsBuf)
-			rowsBuf = append(rowsBuf, "value_"...)
-			rowsBuf = strconv.AppendInt(rowsBuf, int64(j), 10)
-			entries = append(entries, Entry{
-				Timestamp: time.Now(),
-				Line:      bytesutil.ToUnsafeString(rowsBuf[rowsBufLen:]),
-			})
+		for j := 0; j < rows; j++ {
+			st.Entries = append(st.Entries, Entry{Timestamp: time.Now(), Line: "value_" + strconv.Itoa(j)})
 		}
 
-		st := &streams[i]
-		st.Labels = labels
-		st.Entries = entries[entriesLen:]
-	}
-	pr := PushRequest{
-		Streams: streams,
+		pr.Streams = append(pr.Streams, st)
 	}
 
-	body := pr.MarshalProtobuf(nil)
+	body, _ := pr.Marshal()
 	encodedBody := snappy.Encode(nil, body)
 
 	return encodedBody

app/vlinsert/loki/pb.go

@@ -1,302 +0,0 @@
-// Code generated by protoc-gen-gogo. DO NOT EDIT.
-// source: push_request.proto
-// source: https://raw.githubusercontent.com/grafana/loki/main/pkg/push/push_request.proto
-// Licensed under the Apache License, Version 2.0 (the "License");
-// https://github.com/grafana/loki/blob/main/pkg/push/LICENSE
-
-package loki
-
-import (
-	"fmt"
-	"time"
-
-	"github.com/VictoriaMetrics/easyproto"
-)
-
-var mp easyproto.MarshalerPool
-
-// PushRequest represents Loki PushRequest
-//
-// See https://github.com/grafana/loki/blob/4220737a52da7ab6c9346b12d5a5d7bedbcd641d/pkg/push/push.proto#L14C1-L14C20
-type PushRequest struct {
-	Streams []Stream
-
-	entriesBuf   []Entry
-	labelPairBuf []LabelPair
-}
-
-func (pr *PushRequest) reset() {
-	pr.Streams = pr.Streams[:0]
-
-	pr.entriesBuf = pr.entriesBuf[:0]
-	pr.labelPairBuf = pr.labelPairBuf[:0]
-}
-
-// UnmarshalProtobuf unmarshals pr from protobuf message at src.
-//
-// pr remains valid until src is modified.
-func (pr *PushRequest) UnmarshalProtobuf(src []byte) error {
-	pr.reset()
-	var err error
-	pr.entriesBuf, pr.labelPairBuf, err = pr.unmarshalProtobuf(pr.entriesBuf, pr.labelPairBuf, src)
-	return err
-}
-
-// MarshalProtobuf marshals r to protobuf message, appends it to dst and returns the result.
-func (pr *PushRequest) MarshalProtobuf(dst []byte) []byte {
-	m := mp.Get()
-	pr.marshalProtobuf(m.MessageMarshaler())
-	dst = m.Marshal(dst)
-	mp.Put(m)
-	return dst
-}
-
-func (pr *PushRequest) marshalProtobuf(mm *easyproto.MessageMarshaler) {
-	for _, s := range pr.Streams {
-		s.marshalProtobuf(mm.AppendMessage(1))
-	}
-}
-
-func (pr *PushRequest) unmarshalProtobuf(entriesBuf []Entry, labelPairBuf []LabelPair, src []byte) ([]Entry, []LabelPair, error) {
-	// message PushRequest {
-	//   repeated Stream streams = 1;
-	// }
-	var err error
-	var fc easyproto.FieldContext
-	for len(src) > 0 {
-		src, err = fc.NextField(src)
-		if err != nil {
-			return entriesBuf, labelPairBuf, fmt.Errorf("cannot read next field in PushRequest: %w", err)
-		}
-		switch fc.FieldNum {
-		case 1:
-			data, ok := fc.MessageData()
-			if !ok {
-				return entriesBuf, labelPairBuf, fmt.Errorf("cannot read Stream data")
-			}
-			pr.Streams = append(pr.Streams, Stream{})
-			s := &pr.Streams[len(pr.Streams)-1]
-			entriesBuf, labelPairBuf, err = s.unmarshalProtobuf(entriesBuf, labelPairBuf, data)
-			if err != nil {
-				return entriesBuf, labelPairBuf, fmt.Errorf("cannot unmarshal Stream: %w", err)
-			}
-		}
-	}
-	return entriesBuf, labelPairBuf, nil
-}
-
-// Stream represents Loki stream.
-//
-// See https://github.com/grafana/loki/blob/4220737a52da7ab6c9346b12d5a5d7bedbcd641d/pkg/push/push.proto#L23
-type Stream struct {
-	Labels  string
-	Entries []Entry
-}
-
-func (s *Stream) marshalProtobuf(mm *easyproto.MessageMarshaler) {
-	mm.AppendString(1, s.Labels)
-	for _, e := range s.Entries {
-		e.marshalProtobuf(mm.AppendMessage(2))
-	}
-}
-
-func (s *Stream) unmarshalProtobuf(entriesBuf []Entry, labelPairBuf []LabelPair, src []byte) ([]Entry, []LabelPair, error) {
-	// message Stream {
-	//   string labels = 1;
-	//   repeated Entry entries = 2;
-	// }
-	var err error
-	var fc easyproto.FieldContext
-	entriesBufLen := len(entriesBuf)
-	for len(src) > 0 {
-		src, err = fc.NextField(src)
-		if err != nil {
-			return entriesBuf, labelPairBuf, fmt.Errorf("cannot read next field in Stream: %w", err)
-		}
-		switch fc.FieldNum {
-		case 1:
-			labels, ok := fc.String()
-			if !ok {
-				return entriesBuf, labelPairBuf, fmt.Errorf("cannot read labels")
-			}
-			s.Labels = labels
-		case 2:
-			data, ok := fc.MessageData()
-			if !ok {
-				return entriesBuf, labelPairBuf, fmt.Errorf("cannot read Entry data")
-			}
-			entriesBuf = append(entriesBuf, Entry{})
-			e := &entriesBuf[len(entriesBuf)-1]
-			labelPairBuf, err = e.unmarshalProtobuf(labelPairBuf, data)
-			if err != nil {
-				return entriesBuf, labelPairBuf, fmt.Errorf("cannot unmarshal Entry: %w", err)
-			}
-		}
-	}
-	s.Entries = entriesBuf[entriesBufLen:]
-	return entriesBuf, labelPairBuf, nil
-}
-
-// Entry represents Loki entry.
-//
-// See https://github.com/grafana/loki/blob/4220737a52da7ab6c9346b12d5a5d7bedbcd641d/pkg/push/push.proto#L38
-type Entry struct {
-	Timestamp          time.Time
-	Line               string
-	StructuredMetadata []LabelPair
-}
-
-func (e *Entry) marshalProtobuf(mm *easyproto.MessageMarshaler) {
-	marshalTime(mm, 1, e.Timestamp)
-	mm.AppendString(2, e.Line)
-	for _, lp := range e.StructuredMetadata {
-		lp.marshalProtobuf(mm.AppendMessage(3))
-	}
-}
-
-func (e *Entry) unmarshalProtobuf(labelPairBuf []LabelPair, src []byte) ([]LabelPair, error) {
-	// message Entry {
-	//   Timestamp timestamp = 1;
-	//   string line = 2;
-	//   repeated LabelPair structuredMetadata = 3;
-	// }
-	var err error
-	var fc easyproto.FieldContext
-	labelPairBufLen := len(labelPairBuf)
-	for len(src) > 0 {
-		src, err = fc.NextField(src)
-		if err != nil {
-			return labelPairBuf, fmt.Errorf("cannot read next field in Entry: %w", err)
-		}
-		switch fc.FieldNum {
-		case 1:
-			data, ok := fc.MessageData()
-			if !ok {
-				return labelPairBuf, fmt.Errorf("cannot read Timestamp data")
-			}
-			timestamp, err := unmarshalTime(data)
-			if err != nil {
-				return labelPairBuf, fmt.Errorf("cannot unmarshal Timestamp: %w", err)
-			}
-			e.Timestamp = timestamp
-		case 2:
-			line, ok := fc.String()
-			if !ok {
-				return labelPairBuf, fmt.Errorf("cannot read Line")
-			}
-			e.Line = line
-		case 3:
-			data, ok := fc.MessageData()
-			if !ok {
-				return labelPairBuf, fmt.Errorf("cannot read StructuredMetadata")
-			}
-			labelPairBuf = append(labelPairBuf, LabelPair{})
-			lp := &labelPairBuf[len(labelPairBuf)-1]
-			if err := lp.unmarshalProtobuf(data); err != nil {
-				return labelPairBuf, fmt.Errorf("cannot unmarshal StructuredMetadata: %w", err)
-			}
-		}
-	}
-	e.StructuredMetadata = labelPairBuf[labelPairBufLen:]
-	return labelPairBuf, nil
-}
-
-// LabelPair represents Loki label pair.
-//
-// See https://github.com/grafana/loki/blob/4220737a52da7ab6c9346b12d5a5d7bedbcd641d/pkg/push/push.proto#L33
-type LabelPair struct {
-	Name  string
-	Value string
-}
-
-func (lp *LabelPair) marshalProtobuf(mm *easyproto.MessageMarshaler) {
-	mm.AppendString(1, lp.Name)
-	mm.AppendString(2, lp.Value)
-}
-
-func (lp *LabelPair) unmarshalProtobuf(src []byte) (err error) {
-	// message LabelPair {
-	//   string name = 1;
-	//   string value = 2;
-	// }
-	var fc easyproto.FieldContext
-	for len(src) > 0 {
-		src, err = fc.NextField(src)
-		if err != nil {
-			return fmt.Errorf("cannot read next field in LabelPair: %w", err)
-		}
-		switch fc.FieldNum {
-		case 1:
-			name, ok := fc.String()
-			if !ok {
-				return fmt.Errorf("cannot read name")
-			}
-			lp.Name = name
-		case 2:
-			value, ok := fc.String()
-			if !ok {
-				return fmt.Errorf("cannot unmarshal value")
-			}
-			lp.Value = value
-		}
-	}
-	return nil
-}
-
-func marshalTime(mm *easyproto.MessageMarshaler, fieldNum uint32, timestamp time.Time) {
-	nsecs := timestamp.UnixNano()
-	ts := Timestamp{
-		Seconds: nsecs / 1e9,
-		Nanos:   int32(nsecs % 1e9),
-	}
-	ts.marshalProtobuf(mm.AppendMessage(fieldNum))
-}
-
-func unmarshalTime(src []byte) (time.Time, error) {
-	var ts Timestamp
-	if err := ts.unmarshalProtobuf(src); err != nil {
-		return time.Time{}, err
-	}
-	timestamp := time.Unix(ts.Seconds, int64(ts.Nanos)).UTC()
-	return timestamp, nil
-}
-
-// Timestamp is protobuf well-known timestamp type.
-type Timestamp struct {
-	Seconds int64
-	Nanos   int32
-}
-
-func (ts *Timestamp) marshalProtobuf(mm *easyproto.MessageMarshaler) {
-	mm.AppendInt64(1, ts.Seconds)
-	mm.AppendInt32(2, ts.Nanos)
-}
-
-func (ts *Timestamp) unmarshalProtobuf(src []byte) (err error) {
-	// message Timestamp {
-	//   int64 seconds = 1;
-	//   int32 nanos = 2;
-	// }
-	var fc easyproto.FieldContext
-	for len(src) > 0 {
-		src, err = fc.NextField(src)
-		if err != nil {
-			return fmt.Errorf("cannot read next field in Timestamp: %w", err)
-		}
-		switch fc.FieldNum {
-		case 1:
-			seconds, ok := fc.Int64()
-			if !ok {
-				return fmt.Errorf("cannot read Seconds")
-			}
-			ts.Seconds = seconds
-		case 2:
-			nanos, ok := fc.Int32()
-			if !ok {
-				return fmt.Errorf("cannot read Nanos")
-			}
-			ts.Nanos = nanos
-		}
-	}
-	return nil
-}

app/vlinsert/loki/push_request.proto

@@ -0,0 +1,38 @@
+syntax = "proto3";
+
+// source: https://raw.githubusercontent.com/grafana/loki/main/pkg/push/push.proto
+// Licensed under the Apache License, Version 2.0 (the "License");
+// https://github.com/grafana/loki/blob/main/pkg/push/LICENSE
+
+package logproto;
+
+import "gogoproto/gogo.proto";
+import "google/protobuf/timestamp.proto";
+
+option go_package = "github.com/VictoriaMetrics/VictoriaMetrics/app/vlinsert/loki";
+
+message PushRequest {
+  repeated StreamAdapter streams = 1 [
+    (gogoproto.jsontag) = "streams",
+    (gogoproto.customtype) = "Stream"
+  ];
+}
+
+message StreamAdapter {
+  string labels = 1 [(gogoproto.jsontag) = "labels"];
+  repeated EntryAdapter entries = 2 [
+    (gogoproto.nullable) = false,
+    (gogoproto.jsontag) = "entries"
+  ];
+  // hash contains the original hash of the stream.
+  uint64 hash = 3 [(gogoproto.jsontag) = "-"];
+}
+
+message EntryAdapter {
+  google.protobuf.Timestamp timestamp = 1 [
+    (gogoproto.stdtime) = true,
+    (gogoproto.nullable) = false,
+    (gogoproto.jsontag) = "ts"
+  ];
+  string line = 2 [(gogoproto.jsontag) = "line"];
+}

app/vlinsert/loki/timestamp.go

@@ -0,0 +1,110 @@
+package loki
+
+// source: https://raw.githubusercontent.com/grafana/loki/main/pkg/push/timestamp.go
+// Licensed under the Apache License, Version 2.0 (the "License");
+// https://github.com/grafana/loki/blob/main/pkg/push/LICENSE
+
+import (
+	"errors"
+	"strconv"
+	"time"
+
+	"github.com/gogo/protobuf/types"
+)
+
+const (
+	// Seconds field of the earliest valid Timestamp.
+	// This is time.Date(1, 1, 1, 0, 0, 0, 0, time.UTC).Unix().
+	minValidSeconds = -62135596800
+	// Seconds field just after the latest valid Timestamp.
+	// This is time.Date(10000, 1, 1, 0, 0, 0, 0, time.UTC).Unix().
+	maxValidSeconds = 253402300800
+)
+
+// validateTimestamp determines whether a Timestamp is valid.
+// A valid timestamp represents a time in the range
+// [0001-01-01, 10000-01-01) and has a Nanos field
+// in the range [0, 1e9).
+//
+// If the Timestamp is valid, validateTimestamp returns nil.
+// Otherwise, it returns an error that describes
+// the problem.
+//
+// Every valid Timestamp can be represented by a time.Time, but the converse is not true.
+func validateTimestamp(ts *types.Timestamp) error {
+	if ts == nil {
+		return errors.New("timestamp: nil Timestamp")
+	}
+	if ts.Seconds < minValidSeconds {
+		return errors.New("timestamp: " + formatTimestamp(ts) + " before 0001-01-01")
+	}
+	if ts.Seconds >= maxValidSeconds {
+		return errors.New("timestamp: " + formatTimestamp(ts) + " after 10000-01-01")
+	}
+	if ts.Nanos < 0 || ts.Nanos >= 1e9 {
+		return errors.New("timestamp: " + formatTimestamp(ts) + ": nanos not in range [0, 1e9)")
+	}
+	return nil
+}
+
+// formatTimestamp is equivalent to fmt.Sprintf("%#v", ts)
+// but avoids the escape incurred by using fmt.Sprintf, eliminating
+// unnecessary heap allocations.
+func formatTimestamp(ts *types.Timestamp) string {
+	if ts == nil {
+		return "nil"
+	}
+
+	seconds := strconv.FormatInt(ts.Seconds, 10)
+	nanos := strconv.FormatInt(int64(ts.Nanos), 10)
+	return "&types.Timestamp{Seconds: " + seconds + ",\nNanos: " + nanos + ",\n}"
+}
+
+func sizeOfStdTime(t time.Time) int {
+	ts, err := timestampProto(t)
+	if err != nil {
+		return 0
+	}
+	return ts.Size()
+}
+
+func stdTimeMarshalTo(t time.Time, data []byte) (int, error) {
+	ts, err := timestampProto(t)
+	if err != nil {
+		return 0, err
+	}
+	return ts.MarshalTo(data)
+}
+
+func stdTimeUnmarshal(t *time.Time, data []byte) error {
+	ts := &types.Timestamp{}
+	if err := ts.Unmarshal(data); err != nil {
+		return err
+	}
+	tt, err := timestampFromProto(ts)
+	if err != nil {
+		return err
+	}
+	*t = tt
+	return nil
+}
+
+func timestampFromProto(ts *types.Timestamp) (time.Time, error) {
+	// Don't return the zero value on error, because corresponds to a valid
+	// timestamp. Instead return whatever time.Unix gives us.
+	var t time.Time
+	if ts == nil {
+		t = time.Unix(0, 0).UTC() // treat nil like the empty Timestamp
+	} else {
+		t = time.Unix(ts.Seconds, int64(ts.Nanos)).UTC()
+	}
+	return t, validateTimestamp(ts)
+}
+
+func timestampProto(t time.Time) (types.Timestamp, error) {
+	ts := types.Timestamp{
+		Seconds: t.Unix(),
+		Nanos:   int32(t.Nanosecond()),
+	}
+	return ts, validateTimestamp(&ts)
+}

app/vlinsert/loki/types.go

@@ -0,0 +1,481 @@
+package loki
+
+// source: https://raw.githubusercontent.com/grafana/loki/main/pkg/push/types.go
+// Licensed under the Apache License, Version 2.0 (the "License");
+// https://github.com/grafana/loki/blob/main/pkg/push/LICENSE
+
+import (
+	"fmt"
+	"io"
+	"time"
+)
+
+// Stream contains a unique labels set as a string and a set of entries for it.
+// We are not using the proto generated version but this custom one so that we
+// can improve serialization see benchmark.
+type Stream struct {
+	Labels  string  `protobuf:"bytes,1,opt,name=labels,proto3" json:"labels"`
+	Entries []Entry `protobuf:"bytes,2,rep,name=entries,proto3,customtype=EntryAdapter" json:"entries"`
+	Hash    uint64  `protobuf:"varint,3,opt,name=hash,proto3" json:"-"`
+}
+
+// Entry is a log entry with a timestamp.
+type Entry struct {
+	Timestamp time.Time `protobuf:"bytes,1,opt,name=timestamp,proto3,stdtime" json:"ts"`
+	Line      string    `protobuf:"bytes,2,opt,name=line,proto3" json:"line"`
+}
+
+// Marshal implements the proto.Marshaler interface.
+func (m *Stream) Marshal() (dAtA []byte, err error) {
+	size := m.Size()
+	dAtA = make([]byte, size)
+	n, err := m.MarshalToSizedBuffer(dAtA[:size])
+	if err != nil {
+		return nil, err
+	}
+	return dAtA[:n], nil
+}
+
+// MarshalTo marshals m to dst.
+func (m *Stream) MarshalTo(dAtA []byte) (int, error) {
+	size := m.Size()
+	return m.MarshalToSizedBuffer(dAtA[:size])
+}
+
+// MarshalToSizedBuffer marshals m to the sized buffer.
+func (m *Stream) MarshalToSizedBuffer(dAtA []byte) (int, error) {
+	i := len(dAtA)
+	_ = i
+	var l int
+	_ = l
+	if m.Hash != 0 {
+		i = encodeVarintPush(dAtA, i, m.Hash)
+		i--
+		dAtA[i] = 0x18
+	}
+	if len(m.Entries) > 0 {
+		for iNdEx := len(m.Entries) - 1; iNdEx >= 0; iNdEx-- {
+			{
+				size, err := m.Entries[iNdEx].MarshalToSizedBuffer(dAtA[:i])
+				if err != nil {
+					return 0, err
+				}
+				i -= size
+				i = encodeVarintPush(dAtA, i, uint64(size))
+			}
+			i--
+			dAtA[i] = 0x12
+		}
+	}
+	if len(m.Labels) > 0 {
+		i -= len(m.Labels)
+		copy(dAtA[i:], m.Labels)
+		i = encodeVarintPush(dAtA, i, uint64(len(m.Labels)))
+		i--
+		dAtA[i] = 0xa
+	}
+	return len(dAtA) - i, nil
+}
+
+// Marshal implements the proto.Marshaler interface.
+func (m *Entry) Marshal() (dAtA []byte, err error) {
+	size := m.Size()
+	dAtA = make([]byte, size)
+	n, err := m.MarshalToSizedBuffer(dAtA[:size])
+	if err != nil {
+		return nil, err
+	}
+	return dAtA[:n], nil
+}
+
+// MarshalTo marshals m to dst.
+func (m *Entry) MarshalTo(dAtA []byte) (int, error) {
+	size := m.Size()
+	return m.MarshalToSizedBuffer(dAtA[:size])
+}
+
+// MarshalToSizedBuffer marshals m to the sized buffer.
+func (m *Entry) MarshalToSizedBuffer(dAtA []byte) (int, error) {
+	i := len(dAtA)
+	_ = i
+	var l int
+	_ = l
+	if len(m.Line) > 0 {
+		i -= len(m.Line)
+		copy(dAtA[i:], m.Line)
+		i = encodeVarintPush(dAtA, i, uint64(len(m.Line)))
+		i--
+		dAtA[i] = 0x12
+	}
+	n7, err7 := stdTimeMarshalTo(m.Timestamp, dAtA[i-sizeOfStdTime(m.Timestamp):])
+	if err7 != nil {
+		return 0, err7
+	}
+	i -= n7
+	i = encodeVarintPush(dAtA, i, uint64(n7))
+	i--
+	dAtA[i] = 0xa
+	return len(dAtA) - i, nil
+}
+
+// Unmarshal unmarshals the given data into m.
+func (m *Stream) Unmarshal(dAtA []byte) error {
+	l := len(dAtA)
+	iNdEx := 0
+	for iNdEx < l {
+		preIndex := iNdEx
+		var wire uint64
+		for shift := uint(0); ; shift += 7 {
+			if shift >= 64 {
+				return ErrIntOverflowPush
+			}
+			if iNdEx >= l {
+				return io.ErrUnexpectedEOF
+			}
+			b := dAtA[iNdEx]
+			iNdEx++
+			wire |= uint64(b&0x7F) << shift
+			if b < 0x80 {
+				break
+			}
+		}
+		fieldNum := int32(wire >> 3)
+		wireType := int(wire & 0x7)
+		if wireType == 4 {
+			return fmt.Errorf("proto: StreamAdapter: wiretype end group for non-group")
+		}
+		if fieldNum <= 0 {
+			return fmt.Errorf("proto: StreamAdapter: illegal tag %d (wire type %d)", fieldNum, wire)
+		}
+		switch fieldNum {
+		case 1:
+			if wireType != 2 {
+				return fmt.Errorf("proto: wrong wireType = %d for field Labels", wireType)
+			}
+			var stringLen uint64
+			for shift := uint(0); ; shift += 7 {
+				if shift >= 64 {
+					return ErrIntOverflowPush
+				}
+				if iNdEx >= l {
+					return io.ErrUnexpectedEOF
+				}
+				b := dAtA[iNdEx]
+				iNdEx++
+				stringLen |= uint64(b&0x7F) << shift
+				if b < 0x80 {
+					break
+				}
+			}
+			intStringLen := int(stringLen)
+			if intStringLen < 0 {
+				return ErrInvalidLengthPush
+			}
+			postIndex := iNdEx + intStringLen
+			if postIndex < 0 {
+				return ErrInvalidLengthPush
+			}
+			if postIndex > l {
+				return io.ErrUnexpectedEOF
+			}
+			m.Labels = string(dAtA[iNdEx:postIndex])
+			iNdEx = postIndex
+		case 2:
+			if wireType != 2 {
+				return fmt.Errorf("proto: wrong wireType = %d for field Entries", wireType)
+			}
+			var msglen int
+			for shift := uint(0); ; shift += 7 {
+				if shift >= 64 {
+					return ErrIntOverflowPush
+				}
+				if iNdEx >= l {
+					return io.ErrUnexpectedEOF
+				}
+				b := dAtA[iNdEx]
+				iNdEx++
+				msglen |= int(b&0x7F) << shift
+				if b < 0x80 {
+					break
+				}
+			}
+			if msglen < 0 {
+				return ErrInvalidLengthPush
+			}
+			postIndex := iNdEx + msglen
+			if postIndex < 0 {
+				return ErrInvalidLengthPush
+			}
+			if postIndex > l {
+				return io.ErrUnexpectedEOF
+			}
+			m.Entries = append(m.Entries, Entry{})
+			if err := m.Entries[len(m.Entries)-1].Unmarshal(dAtA[iNdEx:postIndex]); err != nil {
+				return err
+			}
+			iNdEx = postIndex
+		case 3:
+			if wireType != 0 {
+				return fmt.Errorf("proto: wrong wireType = %d for field Hash", wireType)
+			}
+			m.Hash = 0
+			for shift := uint(0); ; shift += 7 {
+				if shift >= 64 {
+					return ErrIntOverflowPush
+				}
+				if iNdEx >= l {
+					return io.ErrUnexpectedEOF
+				}
+				b := dAtA[iNdEx]
+				iNdEx++
+				m.Hash |= uint64(b&0x7F) << shift
+				if b < 0x80 {
+					break
+				}
+			}
+		default:
+			iNdEx = preIndex
+			skippy, err := skipPush(dAtA[iNdEx:])
+			if err != nil {
+				return err
+			}
+			if skippy < 0 {
+				return ErrInvalidLengthPush
+			}
+			if (iNdEx + skippy) < 0 {
+				return ErrInvalidLengthPush
+			}
+			if (iNdEx + skippy) > l {
+				return io.ErrUnexpectedEOF
+			}
+			iNdEx += skippy
+		}
+	}
+
+	if iNdEx > l {
+		return io.ErrUnexpectedEOF
+	}
+	return nil
+}
+
+// Unmarshal unmarshals the given data into m.
+func (m *Entry) Unmarshal(dAtA []byte) error {
+	l := len(dAtA)
+	iNdEx := 0
+	for iNdEx < l {
+		preIndex := iNdEx
+		var wire uint64
+		for shift := uint(0); ; shift += 7 {
+			if shift >= 64 {
+				return ErrIntOverflowPush
+			}
+			if iNdEx >= l {
+				return io.ErrUnexpectedEOF
+			}
+			b := dAtA[iNdEx]
+			iNdEx++
+			wire |= uint64(b&0x7F) << shift
+			if b < 0x80 {
+				break
+			}
+		}
+		fieldNum := int32(wire >> 3)
+		wireType := int(wire & 0x7)
+		if wireType == 4 {
+			return fmt.Errorf("proto: EntryAdapter: wiretype end group for non-group")
+		}
+		if fieldNum <= 0 {
+			return fmt.Errorf("proto: EntryAdapter: illegal tag %d (wire type %d)", fieldNum, wire)
+		}
+		switch fieldNum {
+		case 1:
+			if wireType != 2 {
+				return fmt.Errorf("proto: wrong wireType = %d for field Timestamp", wireType)
+			}
+			var msglen int
+			for shift := uint(0); ; shift += 7 {
+				if shift >= 64 {
+					return ErrIntOverflowPush
+				}
+				if iNdEx >= l {
+					return io.ErrUnexpectedEOF
+				}
+				b := dAtA[iNdEx]
+				iNdEx++
+				msglen |= int(b&0x7F) << shift
+				if b < 0x80 {
+					break
+				}
+			}
+			if msglen < 0 {
+				return ErrInvalidLengthPush
+			}
+			postIndex := iNdEx + msglen
+			if postIndex < 0 {
+				return ErrInvalidLengthPush
+			}
+			if postIndex > l {
+				return io.ErrUnexpectedEOF
+			}
+			if err := stdTimeUnmarshal(&m.Timestamp, dAtA[iNdEx:postIndex]); err != nil {
+				return err
+			}
+			iNdEx = postIndex
+		case 2:
+			if wireType != 2 {
+				return fmt.Errorf("proto: wrong wireType = %d for field Line", wireType)
+			}
+			var stringLen uint64
+			for shift := uint(0); ; shift += 7 {
+				if shift >= 64 {
+					return ErrIntOverflowPush
+				}
+				if iNdEx >= l {
+					return io.ErrUnexpectedEOF
+				}
+				b := dAtA[iNdEx]
+				iNdEx++
+				stringLen |= uint64(b&0x7F) << shift
+				if b < 0x80 {
+					break
+				}
+			}
+			intStringLen := int(stringLen)
+			if intStringLen < 0 {
+				return ErrInvalidLengthPush
+			}
+			postIndex := iNdEx + intStringLen
+			if postIndex < 0 {
+				return ErrInvalidLengthPush
+			}
+			if postIndex > l {
+				return io.ErrUnexpectedEOF
+			}
+			m.Line = string(dAtA[iNdEx:postIndex])
+			iNdEx = postIndex
+		default:
+			iNdEx = preIndex
+			skippy, err := skipPush(dAtA[iNdEx:])
+			if err != nil {
+				return err
+			}
+			if skippy < 0 {
+				return ErrInvalidLengthPush
+			}
+			if (iNdEx + skippy) < 0 {
+				return ErrInvalidLengthPush
+			}
+			if (iNdEx + skippy) > l {
+				return io.ErrUnexpectedEOF
+			}
+			iNdEx += skippy
+		}
+	}
+
+	if iNdEx > l {
+		return io.ErrUnexpectedEOF
+	}
+	return nil
+}
+
+// Size returns the size of the serialized Stream.
+func (m *Stream) Size() (n int) {
+	if m == nil {
+		return 0
+	}
+	var l int
+	_ = l
+	l = len(m.Labels)
+	if l > 0 {
+		n += 1 + l + sovPush(uint64(l))
+	}
+	if len(m.Entries) > 0 {
+		for _, e := range m.Entries {
+			l = e.Size()
+			n += 1 + l + sovPush(uint64(l))
+		}
+	}
+	if m.Hash != 0 {
+		n += 1 + sovPush(m.Hash)
+	}
+	return n
+}
+
+// Size returns the size of the serialized Entry
+func (m *Entry) Size() (n int) {
+	if m == nil {
+		return 0
+	}
+	var l int
+	_ = l
+	l = sizeOfStdTime(m.Timestamp)
+	n += 1 + l + sovPush(uint64(l))
+	l = len(m.Line)
+	if l > 0 {
+		n += 1 + l + sovPush(uint64(l))
+	}
+	return n
+}
+
+// Equal returns true if the two Streams are equal.
+func (m *Stream) Equal(that interface{}) bool {
+	if that == nil {
+		return m == nil
+	}
+
+	that1, ok := that.(*Stream)
+	if !ok {
+		that2, ok := that.(Stream)
+		if ok {
+			that1 = &that2
+		} else {
+			return false
+		}
+	}
+	if that1 == nil {
+		return m == nil
+	} else if m == nil {
+		return false
+	}
+	if m.Labels != that1.Labels {
+		return false
+	}
+	if len(m.Entries) != len(that1.Entries) {
+		return false
+	}
+	for i := range m.Entries {
+		if !m.Entries[i].Equal(that1.Entries[i]) {
+			return false
+		}
+	}
+	return m.Hash == that1.Hash
+}
+
+// Equal returns true if the two Entries are equal.
+func (m *Entry) Equal(that interface{}) bool {
+	if that == nil {
+		return m == nil
+	}
+
+	that1, ok := that.(*Entry)
+	if !ok {
+		that2, ok := that.(Entry)
+		if ok {
+			that1 = &that2
+		} else {
+			return false
+		}
+	}
+	if that1 == nil {
+		return m == nil
+	} else if m == nil {
+		return false
+	}
+	if !m.Timestamp.Equal(that1.Timestamp) {
+		return false
+	}
+	if m.Line != that1.Line {
+		return false
+	}
+	return true
+}

app/vlinsert/main.go

@@ -7,17 +7,14 @@ import (
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlinsert/elasticsearch"
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlinsert/jsonline"
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlinsert/loki"
-	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlinsert/syslog"
 )
 
 // Init initializes vlinsert
 func Init() {
-	syslog.MustInit()
 }
 
 // Stop stops vlinsert
 func Stop() {
-	syslog.MustStop()
 }
 
 // RequestHandler handles insert requests for VictoriaLogs
@@ -31,8 +28,7 @@ func RequestHandler(w http.ResponseWriter, r *http.Request) bool {
 	path = strings.ReplaceAll(path, "//", "/")
 
 	if path == "/jsonline" {
-		jsonline.RequestHandler(w, r)
-		return true
+		return jsonline.RequestHandler(w, r)
 	}
 	switch {
 	case strings.HasPrefix(path, "/elasticsearch/"):

app/vlinsert/syslog/syslog.go

@@ -1,531 +0,0 @@
-package syslog
-
-import (
-	"bufio"
-	"crypto/tls"
-	"errors"
-	"flag"
-	"fmt"
-	"io"
-	"net"
-	"strconv"
-	"strings"
-	"sync"
-	"sync/atomic"
-	"time"
-
-	"github.com/klauspost/compress/gzip"
-
-	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlinsert/insertutils"
-	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlstorage"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/bytesutil"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/cgroup"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/flagutil"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/ingestserver"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/netutil"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/protoparser/common"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/slicesutil"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/writeconcurrencylimiter"
-	"github.com/VictoriaMetrics/metrics"
-)
-
-var (
-	syslogTimezone = flag.String("syslog.timezone", "Local", "Timezone to use when parsing timestamps in RFC3164 syslog messages. Timezone must be a valid IANA Time Zone. "+
-		"For example: America/New_York, Europe/Berlin, Etc/GMT+3 . See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/")
-
-	syslogTenantIDTCP = flagutil.NewArrayString("syslog.tenantID.tcp", "TenantID for logs ingested via the corresponding -syslog.listenAddr.tcp. "+
-		"See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/")
-	syslogTenantIDUDP = flagutil.NewArrayString("syslog.tenantID.udp", "TenantID for logs ingested via the corresponding -syslog.listenAddr.udp. "+
-		"See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/")
-
-	listenAddrTCP = flagutil.NewArrayString("syslog.listenAddr.tcp", "Comma-separated list of TCP addresses to listen to for Syslog messages. "+
-		"See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/")
-	listenAddrUDP = flagutil.NewArrayString("syslog.listenAddr.udp", "Comma-separated list of UDP address to listen to for Syslog messages. "+
-		"See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/")
-
-	tlsEnable = flagutil.NewArrayBool("syslog.tls", "Whether to enable TLS for receiving syslog messages at the corresponding -syslog.listenAddr.tcp. "+
-		"The corresponding -syslog.tlsCertFile and -syslog.tlsKeyFile must be set if -syslog.tls is set. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#security")
-	tlsCertFile = flagutil.NewArrayString("syslog.tlsCertFile", "Path to file with TLS certificate for the corresponding -syslog.listenAddr.tcp if the corresponding -syslog.tls is set. "+
-		"Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated. "+
-		"See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#security")
-	tlsKeyFile = flagutil.NewArrayString("syslog.tlsKeyFile", "Path to file with TLS key for the corresponding -syslog.listenAddr.tcp if the corresponding -syslog.tls is set. "+
-		"The provided key file is automatically re-read every second, so it can be dynamically updated. "+
-		"See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#security")
-	tlsCipherSuites = flagutil.NewArrayString("syslog.tlsCipherSuites", "Optional list of TLS cipher suites for -syslog.listenAddr.tcp if -syslog.tls is set. "+
-		"See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants . "+
-		"See also https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#security")
-	tlsMinVersion = flag.String("syslog.tlsMinVersion", "TLS13", "The minimum TLS version to use for -syslog.listenAddr.tcp if -syslog.tls is set. "+
-		"Supported values: TLS10, TLS11, TLS12, TLS13. "+
-		"See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#security")
-
-	compressMethodTCP = flagutil.NewArrayString("syslog.compressMethod.tcp", "Compression method for syslog messages received at the corresponding -syslog.listenAddr.tcp. "+
-		"Supported values: none, gzip, deflate. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#compression")
-	compressMethodUDP = flagutil.NewArrayString("syslog.compressMethod.udp", "Compression method for syslog messages received at the corresponding -syslog.listenAddr.udp. "+
-		"Supported values: none, gzip, deflate. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#compression")
-
-	useLocalTimestampTCP = flagutil.NewArrayBool("syslog.useLocalTimestamp.tcp", "Whether to use local timestamp instead of the original timestamp for the ingested syslog messages "+
-		"at the corresponding -syslog.listenAddr.tcp. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#log-timestamps")
-	useLocalTimestampUDP = flagutil.NewArrayBool("syslog.useLocalTimestamp.udp", "Whether to use local timestamp instead of the original timestamp for the ingested syslog messages "+
-		"at the corresponding -syslog.listenAddr.udp. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#log-timestamps")
-)
-
-// MustInit initializes syslog parser at the given -syslog.listenAddr.tcp and -syslog.listenAddr.udp ports
-//
-// This function must be called after flag.Parse().
-//
-// MustStop() must be called in order to free up resources occupied by the initialized syslog parser.
-func MustInit() {
-	if workersStopCh != nil {
-		logger.Panicf("BUG: MustInit() called twice without MustStop() call")
-	}
-	workersStopCh = make(chan struct{})
-
-	for argIdx, addr := range *listenAddrTCP {
-		workersWG.Add(1)
-		go func(addr string, argIdx int) {
-			runTCPListener(addr, argIdx)
-			workersWG.Done()
-		}(addr, argIdx)
-	}
-
-	for argIdx, addr := range *listenAddrUDP {
-		workersWG.Add(1)
-		go func(addr string, argIdx int) {
-			runUDPListener(addr, argIdx)
-			workersWG.Done()
-		}(addr, argIdx)
-	}
-
-	currentYear := time.Now().Year()
-	globalCurrentYear.Store(int64(currentYear))
-	workersWG.Add(1)
-	go func() {
-		ticker := time.NewTicker(time.Minute)
-		for {
-			select {
-			case <-workersStopCh:
-				ticker.Stop()
-				workersWG.Done()
-				return
-			case <-ticker.C:
-				currentYear := time.Now().Year()
-				globalCurrentYear.Store(int64(currentYear))
-			}
-		}
-	}()
-
-	if *syslogTimezone != "" {
-		tz, err := time.LoadLocation(*syslogTimezone)
-		if err != nil {
-			logger.Fatalf("cannot parse -syslog.timezone=%q: %s", *syslogTimezone, err)
-		}
-		globalTimezone = tz
-	} else {
-		globalTimezone = time.Local
-	}
-}
-
-var (
-	globalCurrentYear atomic.Int64
-	globalTimezone    *time.Location
-)
-
-var (
-	workersWG     sync.WaitGroup
-	workersStopCh chan struct{}
-)
-
-// MustStop stops syslog parser initialized via MustInit()
-func MustStop() {
-	close(workersStopCh)
-	workersWG.Wait()
-	workersStopCh = nil
-}
-
-func runUDPListener(addr string, argIdx int) {
-	ln, err := net.ListenPacket(netutil.GetUDPNetwork(), addr)
-	if err != nil {
-		logger.Fatalf("cannot start UDP syslog server at %q: %s", addr, err)
-	}
-
-	tenantIDStr := syslogTenantIDUDP.GetOptionalArg(argIdx)
-	tenantID, err := logstorage.ParseTenantID(tenantIDStr)
-	if err != nil {
-		logger.Fatalf("cannot parse -syslog.tenantID.udp=%q for -syslog.listenAddr.udp=%q: %s", tenantIDStr, addr, err)
-	}
-
-	compressMethod := compressMethodUDP.GetOptionalArg(argIdx)
-	checkCompressMethod(compressMethod, addr, "udp")
-
-	useLocalTimestamp := useLocalTimestampUDP.GetOptionalArg(argIdx)
-
-	doneCh := make(chan struct{})
-	go func() {
-		serveUDP(ln, tenantID, compressMethod, useLocalTimestamp)
-		close(doneCh)
-	}()
-
-	logger.Infof("started accepting syslog messages at -syslog.listenAddr.udp=%q", addr)
-	<-workersStopCh
-	if err := ln.Close(); err != nil {
-		logger.Fatalf("syslog: cannot close UDP listener at %s: %s", addr, err)
-	}
-	<-doneCh
-	logger.Infof("finished accepting syslog messages at -syslog.listenAddr.udp=%q", addr)
-}
-
-func runTCPListener(addr string, argIdx int) {
-	var tlsConfig *tls.Config
-	if tlsEnable.GetOptionalArg(argIdx) {
-		certFile := tlsCertFile.GetOptionalArg(argIdx)
-		keyFile := tlsKeyFile.GetOptionalArg(argIdx)
-		tc, err := netutil.GetServerTLSConfig(certFile, keyFile, *tlsMinVersion, *tlsCipherSuites)
-		if err != nil {
-			logger.Fatalf("cannot load TLS cert from -syslog.tlsCertFile=%q, -syslog.tlsKeyFile=%q, -syslog.tlsMinVersion=%q, -syslog.tlsCipherSuites=%q: %s",
-				certFile, keyFile, *tlsMinVersion, *tlsCipherSuites, err)
-		}
-		tlsConfig = tc
-	}
-	ln, err := netutil.NewTCPListener("syslog", addr, false, tlsConfig)
-	if err != nil {
-		logger.Fatalf("syslog: cannot start TCP listener at %s: %s", addr, err)
-	}
-
-	tenantIDStr := syslogTenantIDTCP.GetOptionalArg(argIdx)
-	tenantID, err := logstorage.ParseTenantID(tenantIDStr)
-	if err != nil {
-		logger.Fatalf("cannot parse -syslog.tenantID.tcp=%q for -syslog.listenAddr.tcp=%q: %s", tenantIDStr, addr, err)
-	}
-
-	compressMethod := compressMethodTCP.GetOptionalArg(argIdx)
-	checkCompressMethod(compressMethod, addr, "tcp")
-
-	useLocalTimestamp := useLocalTimestampTCP.GetOptionalArg(argIdx)
-
-	doneCh := make(chan struct{})
-	go func() {
-		serveTCP(ln, tenantID, compressMethod, useLocalTimestamp)
-		close(doneCh)
-	}()
-
-	logger.Infof("started accepting syslog messages at -syslog.listenAddr.tcp=%q", addr)
-	<-workersStopCh
-	if err := ln.Close(); err != nil {
-		logger.Fatalf("syslog: cannot close TCP listener at %s: %s", addr, err)
-	}
-	<-doneCh
-	logger.Infof("finished accepting syslog messages at -syslog.listenAddr.tcp=%q", addr)
-}
-
-func checkCompressMethod(compressMethod, addr, protocol string) {
-	switch compressMethod {
-	case "", "none", "gzip", "deflate":
-		return
-	default:
-		logger.Fatalf("unsupported -syslog.compressMethod.%s=%q for -syslog.listenAddr.%s=%q; supported values: 'none', 'gzip', 'deflate'", protocol, compressMethod, protocol, addr)
-	}
-}
-
-func serveUDP(ln net.PacketConn, tenantID logstorage.TenantID, compressMethod string, useLocalTimestamp bool) {
-	gomaxprocs := cgroup.AvailableCPUs()
-	var wg sync.WaitGroup
-	localAddr := ln.LocalAddr()
-	for i := 0; i < gomaxprocs; i++ {
-		wg.Add(1)
-		go func() {
-			defer wg.Done()
-			cp := insertutils.GetCommonParamsForSyslog(tenantID)
-			var bb bytesutil.ByteBuffer
-			bb.B = bytesutil.ResizeNoCopyNoOverallocate(bb.B, 64*1024)
-			for {
-				bb.Reset()
-				bb.B = bb.B[:cap(bb.B)]
-				n, remoteAddr, err := ln.ReadFrom(bb.B)
-				if err != nil {
-					udpErrorsTotal.Inc()
-					var ne net.Error
-					if errors.As(err, &ne) {
-						if ne.Temporary() {
-							logger.Errorf("syslog: temporary error when listening for UDP at %q: %s", localAddr, err)
-							time.Sleep(time.Second)
-							continue
-						}
-						if strings.Contains(err.Error(), "use of closed network connection") {
-							break
-						}
-					}
-					logger.Errorf("syslog: cannot read UDP data from %s at %s: %s", remoteAddr, localAddr, err)
-					continue
-				}
-				bb.B = bb.B[:n]
-				udpRequestsTotal.Inc()
-				if err := processStream(bb.NewReader(), compressMethod, useLocalTimestamp, cp); err != nil {
-					logger.Errorf("syslog: cannot process UDP data from %s at %s: %s", remoteAddr, localAddr, err)
-				}
-			}
-		}()
-	}
-	wg.Wait()
-}
-
-func serveTCP(ln net.Listener, tenantID logstorage.TenantID, compressMethod string, useLocalTimestamp bool) {
-	var cm ingestserver.ConnsMap
-	cm.Init("syslog")
-
-	var wg sync.WaitGroup
-	addr := ln.Addr()
-	for {
-		c, err := ln.Accept()
-		if err != nil {
-			var ne net.Error
-			if errors.As(err, &ne) {
-				if ne.Temporary() {
-					logger.Errorf("syslog: temporary error when listening for TCP addr %q: %s", addr, err)
-					time.Sleep(time.Second)
-					continue
-				}
-				if strings.Contains(err.Error(), "use of closed network connection") {
-					break
-				}
-				logger.Fatalf("syslog: unrecoverable error when accepting TCP connections at %q: %s", addr, err)
-			}
-			logger.Fatalf("syslog: unexpected error when accepting TCP connections at %q: %s", addr, err)
-		}
-		if !cm.Add(c) {
-			_ = c.Close()
-			break
-		}
-
-		wg.Add(1)
-		go func() {
-			cp := insertutils.GetCommonParamsForSyslog(tenantID)
-			if err := processStream(c, compressMethod, useLocalTimestamp, cp); err != nil {
-				logger.Errorf("syslog: cannot process TCP data at %q: %s", addr, err)
-			}
-
-			cm.Delete(c)
-			_ = c.Close()
-			wg.Done()
-		}()
-	}
-
-	cm.CloseAll(0)
-	wg.Wait()
-}
-
-// processStream parses a stream of syslog messages from r and ingests them into vlstorage.
-func processStream(r io.Reader, compressMethod string, useLocalTimestamp bool, cp *insertutils.CommonParams) error {
-	if err := vlstorage.CanWriteData(); err != nil {
-		return err
-	}
-
-	lmp := cp.NewLogMessageProcessor()
-	err := processStreamInternal(r, compressMethod, useLocalTimestamp, lmp)
-	lmp.MustClose()
-
-	return err
-}
-
-func processStreamInternal(r io.Reader, compressMethod string, useLocalTimestamp bool, lmp insertutils.LogMessageProcessor) error {
-	switch compressMethod {
-	case "", "none":
-	case "gzip":
-		zr, err := common.GetGzipReader(r)
-		if err != nil {
-			return fmt.Errorf("cannot read gzipped data: %w", err)
-		}
-		r = zr
-	case "deflate":
-		zr, err := common.GetZlibReader(r)
-		if err != nil {
-			return fmt.Errorf("cannot read deflated data: %w", err)
-		}
-		r = zr
-	default:
-		logger.Panicf("BUG: unsupported compressMethod=%q; supported values: none, gzip, deflate", compressMethod)
-	}
-
-	err := processUncompressedStream(r, useLocalTimestamp, lmp)
-
-	switch compressMethod {
-	case "gzip":
-		zr := r.(*gzip.Reader)
-		common.PutGzipReader(zr)
-	case "deflate":
-		zr := r.(io.ReadCloser)
-		common.PutZlibReader(zr)
-	}
-
-	return err
-}
-
-func processUncompressedStream(r io.Reader, useLocalTimestamp bool, lmp insertutils.LogMessageProcessor) error {
-	wcr := writeconcurrencylimiter.GetReader(r)
-	defer writeconcurrencylimiter.PutReader(wcr)
-
-	slr := getSyslogLineReader(wcr)
-	defer putSyslogLineReader(slr)
-
-	n := 0
-	for {
-		ok := slr.nextLine()
-		wcr.DecConcurrency()
-		if !ok {
-			break
-		}
-
-		currentYear := int(globalCurrentYear.Load())
-		err := processLine(slr.line, currentYear, globalTimezone, useLocalTimestamp, lmp)
-		if err != nil {
-			errorsTotal.Inc()
-			return fmt.Errorf("cannot read line #%d: %s", n, err)
-		}
-		n++
-		rowsIngestedTotal.Inc()
-	}
-	return slr.Error()
-}
-
-type syslogLineReader struct {
-	line []byte
-
-	br  *bufio.Reader
-	err error
-}
-
-func (slr *syslogLineReader) reset(r io.Reader) {
-	slr.line = slr.line[:0]
-	slr.br.Reset(r)
-	slr.err = nil
-}
-
-// Error returns the last error occurred in slr.
-func (slr *syslogLineReader) Error() error {
-	if slr.err == nil || slr.err == io.EOF {
-		return nil
-	}
-	return slr.err
-}
-
-// nextLine reads the next syslog line from slr and stores it at slr.line.
-//
-// false is returned if the next line cannot be read. Error() must be called in this case
-// in order to verify whether there is an error or just slr stream has been finished.
-func (slr *syslogLineReader) nextLine() bool {
-	if slr.err != nil {
-		return false
-	}
-
-again:
-	prefix, err := slr.br.ReadSlice(' ')
-	if err != nil {
-		if err != io.EOF {
-			slr.err = fmt.Errorf("cannot read message frame prefix: %w", err)
-			return false
-		}
-		if len(prefix) == 0 {
-			slr.err = err
-			return false
-		}
-	}
-	// skip empty lines
-	for len(prefix) > 0 && prefix[0] == '\n' {
-		prefix = prefix[1:]
-	}
-	if len(prefix) == 0 {
-		// An empty prefix or a prefix with empty lines - try reading yet another prefix.
-		goto again
-	}
-
-	if prefix[0] >= '0' && prefix[0] <= '9' {
-		// This is octet-counting method. See https://www.ietf.org/archive/id/draft-gerhards-syslog-plain-tcp-07.html#msgxfer
-		msgLenStr := bytesutil.ToUnsafeString(prefix[:len(prefix)-1])
-		msgLen, err := strconv.ParseUint(msgLenStr, 10, 64)
-		if err != nil {
-			slr.err = fmt.Errorf("cannot parse message length from %q: %w", msgLenStr, err)
-			return false
-		}
-		if maxMsgLen := insertutils.MaxLineSizeBytes.IntN(); msgLen > uint64(maxMsgLen) {
-			slr.err = fmt.Errorf("cannot read message longer than %d bytes; msgLen=%d", maxMsgLen, msgLen)
-			return false
-		}
-		slr.line = slicesutil.SetLength(slr.line, int(msgLen))
-		if _, err := io.ReadFull(slr.br, slr.line); err != nil {
-			slr.err = fmt.Errorf("cannot read message with size %d bytes: %w", msgLen, err)
-			return false
-		}
-		return true
-	}
-
-	// This is octet-stuffing method. See https://www.ietf.org/archive/id/draft-gerhards-syslog-plain-tcp-07.html#octet-stuffing-legacy
-	slr.line = append(slr.line[:0], prefix...)
-	for {
-		line, err := slr.br.ReadSlice('\n')
-		if err == nil {
-			slr.line = append(slr.line, line[:len(line)-1]...)
-			return true
-		}
-		if err == io.EOF {
-			slr.line = append(slr.line, line...)
-			return true
-		}
-		if err == bufio.ErrBufferFull {
-			slr.line = append(slr.line, line...)
-			continue
-		}
-		slr.err = fmt.Errorf("cannot read message in octet-stuffing method: %w", err)
-		return false
-	}
-}
-
-func getSyslogLineReader(r io.Reader) *syslogLineReader {
-	v := syslogLineReaderPool.Get()
-	if v == nil {
-		br := bufio.NewReaderSize(r, 64*1024)
-		return &syslogLineReader{
-			br: br,
-		}
-	}
-	slr := v.(*syslogLineReader)
-	slr.reset(r)
-	return slr
-}
-
-func putSyslogLineReader(slr *syslogLineReader) {
-	syslogLineReaderPool.Put(slr)
-}
-
-var syslogLineReaderPool sync.Pool
-
-func processLine(line []byte, currentYear int, timezone *time.Location, useLocalTimestamp bool, lmp insertutils.LogMessageProcessor) error {
-	p := logstorage.GetSyslogParser(currentYear, timezone)
-	lineStr := bytesutil.ToUnsafeString(line)
-	p.Parse(lineStr)
-
-	var ts int64
-	if useLocalTimestamp {
-		ts = time.Now().UnixNano()
-	} else {
-		nsecs, err := insertutils.ExtractTimestampRFC3339NanoFromFields("timestamp", p.Fields)
-		if err != nil {
-			return fmt.Errorf("cannot get timestamp from syslog line %q: %w", line, err)
-		}
-		ts = nsecs
-	}
-	logstorage.RenameField(p.Fields, "message", "_msg")
-	lmp.AddRow(ts, p.Fields)
-	logstorage.PutSyslogParser(p)
-
-	return nil
-}
-
-var (
-	rowsIngestedTotal = metrics.NewCounter(`vl_rows_ingested_total{type="syslog"}`)
-
-	errorsTotal = metrics.NewCounter(`vl_errors_total{type="syslog"}`)
-
-	udpRequestsTotal = metrics.NewCounter(`vl_udp_reqests_total{type="syslog"}`)
-	udpErrorsTotal   = metrics.NewCounter(`vl_udp_errors_total{type="syslog"}`)
-)

app/vlinsert/syslog/syslog_test.go

@@ -1,130 +0,0 @@
-package syslog
-
-import (
-	"bytes"
-	"reflect"
-	"testing"
-	"time"
-
-	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlinsert/insertutils"
-)
-
-func TestSyslogLineReader_Success(t *testing.T) {
-	f := func(data string, linesExpected []string) {
-		t.Helper()
-
-		r := bytes.NewBufferString(data)
-		slr := getSyslogLineReader(r)
-		defer putSyslogLineReader(slr)
-
-		var lines []string
-		for slr.nextLine() {
-			lines = append(lines, string(slr.line))
-		}
-		if err := slr.Error(); err != nil {
-			t.Fatalf("unexpected error: %s", err)
-		}
-		if !reflect.DeepEqual(lines, linesExpected) {
-			t.Fatalf("unexpected lines read;\ngot\n%q\nwant\n%q", lines, linesExpected)
-		}
-	}
-
-	f("", nil)
-	f("\n", nil)
-	f("\n\n\n", nil)
-
-	f("foobar", []string{"foobar"})
-	f("foobar\n", []string{"foobar\n"})
-	f("\n\nfoo\n\nbar\n\n", []string{"foo\n\nbar\n\n"})
-
-	f(`Jun  3 12:08:33 abcd systemd: Starting Update the local ESM caches...`, []string{"Jun  3 12:08:33 abcd systemd: Starting Update the local ESM caches..."})
-
-	f(`Jun  3 12:08:33 abcd systemd: Starting Update the local ESM caches...
-
-48 <165>Jun  4 12:08:33 abcd systemd[345]: abc defg<123>1 2023-06-03T17:42:12.345Z mymachine.example.com appname 12345 ID47 [exampleSDID@32473 iut="3" eventSource="Application 123 = ] 56" eventID="11211"] This is a test message with structured data.
-
-`, []string{
-		"Jun  3 12:08:33 abcd systemd: Starting Update the local ESM caches...",
-		"<165>Jun  4 12:08:33 abcd systemd[345]: abc defg",
-		`<123>1 2023-06-03T17:42:12.345Z mymachine.example.com appname 12345 ID47 [exampleSDID@32473 iut="3" eventSource="Application 123 = ] 56" eventID="11211"] This is a test message with structured data.`,
-	})
-}
-
-func TestSyslogLineReader_Failure(t *testing.T) {
-	f := func(data string) {
-		t.Helper()
-
-		r := bytes.NewBufferString(data)
-		slr := getSyslogLineReader(r)
-		defer putSyslogLineReader(slr)
-
-		if slr.nextLine() {
-			t.Fatalf("expecting failure to read the first line")
-		}
-		if err := slr.Error(); err == nil {
-			t.Fatalf("expecting non-nil error")
-		}
-	}
-
-	// invalid format for message size
-	f("12foo bar")
-
-	// too big message size
-	f("123 aa")
-	f("1233423432 abc")
-}
-
-func TestProcessStreamInternal_Success(t *testing.T) {
-	f := func(data string, currentYear, rowsExpected int, timestampsExpected []int64, resultExpected string) {
-		t.Helper()
-
-		MustInit()
-		defer MustStop()
-
-		globalTimezone = time.UTC
-		globalCurrentYear.Store(int64(currentYear))
-
-		tlp := &insertutils.TestLogMessageProcessor{}
-		r := bytes.NewBufferString(data)
-		if err := processStreamInternal(r, "", false, tlp); err != nil {
-			t.Fatalf("unexpected error: %s", err)
-		}
-		if err := tlp.Verify(rowsExpected, timestampsExpected, resultExpected); err != nil {
-			t.Fatal(err)
-		}
-	}
-
-	data := `Jun  3 12:08:33 abcd systemd: Starting Update the local ESM caches...
-
-48 <165>Jun  4 12:08:33 abcd systemd[345]: abc defg<123>1 2023-06-03T17:42:12.345Z mymachine.example.com appname 12345 ID47 [exampleSDID@32473 iut="3" eventSource="Application 123 = ] 56" eventID="11211"] This is a test message with structured data.
-`
-	currentYear := 2023
-	rowsExpected := 3
-	timestampsExpected := []int64{1685794113000000000, 1685880513000000000, 1685814132345000000}
-	resultExpected := `{"format":"rfc3164","timestamp":"","hostname":"abcd","app_name":"systemd","_msg":"Starting Update the local ESM caches..."}
-{"priority":"165","facility":"20","severity":"5","format":"rfc3164","timestamp":"","hostname":"abcd","app_name":"systemd","proc_id":"345","_msg":"abc defg"}
-{"priority":"123","facility":"15","severity":"3","format":"rfc5424","timestamp":"","hostname":"mymachine.example.com","app_name":"appname","proc_id":"12345","msg_id":"ID47","exampleSDID@32473.iut":"3","exampleSDID@32473.eventSource":"Application 123 = ] 56","exampleSDID@32473.eventID":"11211","_msg":"This is a test message with structured data."}`
-	f(data, currentYear, rowsExpected, timestampsExpected, resultExpected)
-}
-
-func TestProcessStreamInternal_Failure(t *testing.T) {
-	f := func(data string) {
-		t.Helper()
-
-		MustInit()
-		defer MustStop()
-
-		tlp := &insertutils.TestLogMessageProcessor{}
-		r := bytes.NewBufferString(data)
-		if err := processStreamInternal(r, "", false, tlp); err == nil {
-			t.Fatalf("expecting non-nil error")
-		}
-	}
-
-	// invalid format for message size
-	f("12foo bar")
-
-	// too big message size
-	f("123 foo")
-	f("123456789 bar")
-}

app/vlogsgenerator/Makefile

@@ -1,7 +0,0 @@
-# All these commands must run from repository root.
-
-vlogsgenerator:
-	APP_NAME=vlogsgenerator $(MAKE) app-local
-
-vlogsgenerator-race:
-	APP_NAME=vlogsgenerator RACE=-race $(MAKE) app-local

app/vlogsgenerator/README.md

@@ -1,158 +0,0 @@
-# vlogsgenerator
-
-Logs generator for [VictoriaLogs](https://docs.victoriametrics.com/victorialogs/).
-
-## How to build vlogsgenerator?
-
-Run `make vlogsgenerator` from the repository root. This builds `bin/vlogsgenerator` binary.
-
-## How run vlogsgenerator?
-
-`vlogsgenerator` generates logs in [JSON line format](https://jsonlines.org/) suitable for the ingestion
-via [`/insert/jsonline` endpoint at VictoriaLogs](https://docs.victoriametrics.com/victorialogs/data-ingestion/#json-stream-api).
-
-By default it writes the generated logs into `stdout`. For example, the following command writes generated logs to `stdout`:
-
-```
-bin/vlogsgenerator
-```
-
-It is possible to redirect the generated logs to file. For example, the following command writes the generated logs to `logs.json` file:
-
-```
-bin/vlogsgenerator > logs.json
-```
-
-The generated logs at `logs.json` file can be inspected with the following command:
-
-```
-head logs.json | jq .
-```
-
-Below is an example output:
-
-```json
-{
-  "_time": "2024-05-08T14:34:00.854Z",
-  "_msg": "message for the stream 8 and worker 0; ip=185.69.136.129; uuid=b4fe8f1a-c93c-dea3-ba11-5b9f0509291e; u64=8996587920687045253",
-  "host": "host_8",
-  "worker_id": "0",
-  "run_id": "f9b3deee-e6b6-7f56-5deb-1586e4e81725",
-  "const_0": "some value 0 8",
-  "const_1": "some value 1 8",
-  "const_2": "some value 2 8",
-  "var_0": "some value 0 12752539384823438260",
-  "dict_0": "warn",
-  "dict_1": "info",
-  "u8_0": "6",
-  "u16_0": "35202",
-  "u32_0": "1964973739",
-  "u64_0": "4810489083243239145",
-  "float_0": "1.868",
-  "ip_0": "250.34.75.125",
-  "timestamp_0": "1799-03-16T01:34:18.311Z",
-  "json_0": "{\"foo\":\"bar_3\",\"baz\":{\"a\":[\"x\",\"y\"]},\"f3\":NaN,\"f4\":32}"
-}
-{
-  "_time": "2024-05-08T14:34:00.854Z",
-  "_msg": "message for the stream 9 and worker 0; ip=164.244.254.194; uuid=7e8373b1-ce0d-1ce7-8e96-4bcab8955598; u64=13949903463741076522",
-  "host": "host_9",
-  "worker_id": "0",
-  "run_id": "f9b3deee-e6b6-7f56-5deb-1586e4e81725",
-  "const_0": "some value 0 9",
-  "const_1": "some value 1 9",
-  "const_2": "some value 2 9",
-  "var_0": "some value 0 5371555382075206134",
-  "dict_0": "INFO",
-  "dict_1": "FATAL",
-  "u8_0": "219",
-  "u16_0": "31459",
-  "u32_0": "3918836777",
-  "u64_0": "6593354256620219850",
-  "float_0": "1.085",
-  "ip_0": "253.151.88.158",
-  "timestamp_0": "2042-10-05T16:42:57.082Z",
-  "json_0": "{\"foo\":\"bar_5\",\"baz\":{\"a\":[\"x\",\"y\"]},\"f3\":NaN,\"f4\":27}"
-}
-```
-
-The `run_id` field uniquely identifies every `vlogsgenerator` invocation.
-
-### How to write logs to VictoriaLogs?
-
-The generated logs can be written directly to VictoriaLogs by passing the address of [`/insert/jsonline` endpoint](https://docs.victoriametrics.com/victorialogs/data-ingestion/#json-stream-api)
-to `-addr` command-line flag. For example, the following command writes the generated logs to VictoriaLogs running at `localhost`:
-
-```
-bin/vlogsgenerator -addr=http://localhost:9428/insert/jsonline
-```
-
-### Configuration
-
-`vlogsgenerator` accepts various command-line flags, which can be used for configuring the number and the shape of the generated logs.
-These flags can be inspected by running `vlogsgenerator -help`. Below are the most interesting flags:
-
-* `-start` - starting timestamp for generating logs. Logs are evenly generated on the [`-start` ... `-end`] interval.
-* `-end` - ending timestamp for generating logs. Logs are evenly generated on the [`-start` ... `-end`] interval.
-* `-activeStreams` - the number of active [log streams](https://docs.victoriametrics.com/victorialogs/keyconcepts/#stream-fields) to generate.
-* `-logsPerStream` - the number of log entries to generate per each log stream. Log entries are evenly distributed on the [`-start` ... `-end`] interval.
-
-The total number of generated logs can be calculated as `-activeStreams` * `-logsPerStream`.
-
-For example, the following command generates `1_000_000` log entries on the time range `[2024-01-01 - 2024-02-01]` across `100`
-[log streams](https://docs.victoriametrics.com/victorialogs/keyconcepts/#stream-fields), where every logs stream contains `10_000` log entries,
-and writes them to `http://localhost:9428/insert/jsonline`:
-
-```
-bin/vlogsgenerator \
-  -start=2024-01-01 -end=2024-02-01 \
-  -activeStreams=100 \
-  -logsPerStream=10_000 \
-  -addr=http://localhost:9428/insert/jsonline
-```
-
-### Churn rate
-
-It is possible to generate churn rate for active [log streams](https://docs.victoriametrics.com/victorialogs/keyconcepts/#stream-fields)
-by specifying `-totalStreams` command-line flag bigger than `-activeStreams`. For example, the following command generates
-logs for `1000` total streams, while the number of active streams equals to `100`. This means that at every time there are logs for `100` streams,
-but these streams change over the given [`-start` ... `-end`] time range, so the total number of streams on the given time range becomes `1000`:
-
-```
-bin/vlogsgenerator \
-  -start=2024-01-01 -end=2024-02-01 \
-  -activeStreams=100 \
-  -totalStreams=1_000 \
-  -logsPerStream=10_000 \
-  -addr=http://localhost:9428/insert/jsonline
-```
-
-In this case the total number of generated logs equals to `-totalStreams` * `-logsPerStream` = `10_000_000`.
-
-### Benchmark tuning
-
-By default `vlogsgenerator` generates and writes logs by a single worker. This may limit the maximum data ingestion rate during benchmarks.
-The number of workers can be changed via `-workers` command-line flag. For example, the following command generates and writes logs with `16` workers:
-
-```
-bin/vlogsgenerator \
-  -start=2024-01-01 -end=2024-02-01 \
-  -activeStreams=100 \
-  -logsPerStream=10_000 \
-  -addr=http://localhost:9428/insert/jsonline \
-  -workers=16
-```
-
-### Output statistics
-
-Every 10 seconds `vlogsgenerator` writes statistics about the generated logs into `stderr`. The frequency of the generated statistics can be adjusted via `-statInterval` command-line flag.
-For example, the following command writes statistics every 2 seconds:
-
-```
-bin/vlogsgenerator \
-  -start=2024-01-01 -end=2024-02-01 \
-  -activeStreams=100 \
-  -logsPerStream=10_000 \
-  -addr=http://localhost:9428/insert/jsonline \
-  -statInterval=2s
-```

app/vlogsgenerator/main.go

@@ -1,344 +0,0 @@
-package main
-
-import (
-	"bufio"
-	"flag"
-	"fmt"
-	"io"
-	"math"
-	"math/rand"
-	"net/http"
-	"net/url"
-	"os"
-	"strconv"
-	"sync"
-	"sync/atomic"
-	"time"
-
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/buildinfo"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/envflag"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/promutils"
-)
-
-var (
-	addr    = flag.String("addr", "stdout", "HTTP address to push the generated logs to; if it is set to stdout, then logs are generated to stdout")
-	workers = flag.Int("workers", 1, "The number of workers to use to push logs to -addr")
-
-	start         = newTimeFlag("start", "-1d", "Generated logs start from this time; see https://docs.victoriametrics.com/#timestamp-formats")
-	end           = newTimeFlag("end", "0s", "Generated logs end at this time; see https://docs.victoriametrics.com/#timestamp-formats")
-	activeStreams = flag.Int("activeStreams", 100, "The number of active log streams to generate; see https://docs.victoriametrics.com/victorialogs/keyconcepts/#stream-fields")
-	totalStreams  = flag.Int("totalStreams", 0, "The number of total log streams; if -totalStreams > -activeStreams, then some active streams are substituted with new streams "+
-		"during data generation")
-	logsPerStream     = flag.Int64("logsPerStream", 1_000, "The number of log entries to generate per each log stream. Log entries are evenly distributed between -start and -end")
-	constFieldsPerLog = flag.Int("constFieldsPerLog", 3, "The number of fields with constaint values to generate per each log entry; "+
-		"see https://docs.victoriametrics.com/victorialogs/keyconcepts/#data-model")
-	varFieldsPerLog = flag.Int("varFieldsPerLog", 1, "The number of fields with variable values to generate per each log entry; "+
-		"see https://docs.victoriametrics.com/victorialogs/keyconcepts/#data-model")
-	dictFieldsPerLog = flag.Int("dictFieldsPerLog", 2, "The number of fields with up to 8 different values to generate per each log entry; "+
-		"see https://docs.victoriametrics.com/victorialogs/keyconcepts/#data-model")
-	u8FieldsPerLog = flag.Int("u8FieldsPerLog", 1, "The number of fields with uint8 values to generate per each log entry; "+
-		"see https://docs.victoriametrics.com/victorialogs/keyconcepts/#data-model")
-	u16FieldsPerLog = flag.Int("u16FieldsPerLog", 1, "The number of fields with uint16 values to generate per each log entry; "+
-		"see https://docs.victoriametrics.com/victorialogs/keyconcepts/#data-model")
-	u32FieldsPerLog = flag.Int("u32FieldsPerLog", 1, "The number of fields with uint32 values to generate per each log entry; "+
-		"see https://docs.victoriametrics.com/victorialogs/keyconcepts/#data-model")
-	u64FieldsPerLog = flag.Int("u64FieldsPerLog", 1, "The number of fields with uint64 values to generate per each log entry; "+
-		"see https://docs.victoriametrics.com/victorialogs/keyconcepts/#data-model")
-	floatFieldsPerLog = flag.Int("floatFieldsPerLog", 1, "The number of fields with float64 values to generate per each log entry; "+
-		"see https://docs.victoriametrics.com/victorialogs/keyconcepts/#data-model")
-	ipFieldsPerLog = flag.Int("ipFieldsPerLog", 1, "The number of fields with IPv4 values to generate per each log entry; "+
-		"see https://docs.victoriametrics.com/victorialogs/keyconcepts/#data-model")
-	timestampFieldsPerLog = flag.Int("timestampFieldsPerLog", 1, "The number of fields with ISO8601 timestamps per each log entry; "+
-		"see https://docs.victoriametrics.com/victorialogs/keyconcepts/#data-model")
-	jsonFieldsPerLog = flag.Int("jsonFieldsPerLog", 1, "The number of JSON fields to generate per each log entry; "+
-		"see https://docs.victoriametrics.com/victorialogs/keyconcepts/#data-model")
-
-	statInterval = flag.Duration("statInterval", 10*time.Second, "The interval between publishing the stats")
-)
-
-func main() {
-	// Write flags and help message to stdout, since it is easier to grep or pipe.
-	flag.CommandLine.SetOutput(os.Stdout)
-	envflag.Parse()
-	buildinfo.Init()
-	logger.Init()
-
-	var remoteWriteURL *url.URL
-	if *addr != "stdout" {
-		urlParsed, err := url.Parse(*addr)
-		if err != nil {
-			logger.Fatalf("cannot parse -addr=%q: %s", *addr, err)
-		}
-		qs, err := url.ParseQuery(urlParsed.RawQuery)
-		if err != nil {
-			logger.Fatalf("cannot parse query string in -addr=%q: %w", *addr, err)
-		}
-		qs.Set("_stream_fields", "host,worker_id")
-		urlParsed.RawQuery = qs.Encode()
-		remoteWriteURL = urlParsed
-	}
-
-	if start.nsec >= end.nsec {
-		logger.Fatalf("-start=%s must be smaller than -end=%s", start, end)
-	}
-	if *activeStreams <= 0 {
-		logger.Fatalf("-activeStreams must be bigger than 0; got %d", *activeStreams)
-	}
-	if *logsPerStream <= 0 {
-		logger.Fatalf("-logsPerStream must be bigger than 0; got %d", *logsPerStream)
-	}
-	if *totalStreams < *activeStreams {
-		*totalStreams = *activeStreams
-	}
-
-	cfg := &workerConfig{
-		url:           remoteWriteURL,
-		activeStreams: *activeStreams,
-		totalStreams:  *totalStreams,
-	}
-
-	// divide total and active streams among workers
-	if *workers <= 0 {
-		logger.Fatalf("-workers must be bigger than 0; got %d", *workers)
-	}
-	if *workers > *activeStreams {
-		logger.Fatalf("-workers=%d cannot exceed -activeStreams=%d", *workers, *activeStreams)
-	}
-	cfg.activeStreams /= *workers
-	cfg.totalStreams /= *workers
-
-	logger.Infof("start -workers=%d workers for ingesting -logsPerStream=%d log entries per each -totalStreams=%d (-activeStreams=%d) on a time range -start=%s, -end=%s to -addr=%s",
-		*workers, *logsPerStream, *totalStreams, *activeStreams, toRFC3339(start.nsec), toRFC3339(end.nsec), *addr)
-
-	startTime := time.Now()
-	var wg sync.WaitGroup
-	for i := 0; i < *workers; i++ {
-		wg.Add(1)
-		go func(workerID int) {
-			defer wg.Done()
-			generateAndPushLogs(cfg, workerID)
-		}(i)
-	}
-
-	go func() {
-		prevEntries := uint64(0)
-		prevBytes := uint64(0)
-		ticker := time.NewTicker(*statInterval)
-		for range ticker.C {
-			currEntries := logEntriesCount.Load()
-			deltaEntries := currEntries - prevEntries
-			rateEntries := float64(deltaEntries) / statInterval.Seconds()
-
-			currBytes := bytesGenerated.Load()
-			deltaBytes := currBytes - prevBytes
-			rateBytes := float64(deltaBytes) / statInterval.Seconds()
-			logger.Infof("generated %dK log entries (%dK total) at %.0fK entries/sec, %dMB (%dMB total) at %.0fMB/sec",
-				deltaEntries/1e3, currEntries/1e3, rateEntries/1e3, deltaBytes/1e6, currBytes/1e6, rateBytes/1e6)
-
-			prevEntries = currEntries
-			prevBytes = currBytes
-		}
-	}()
-
-	wg.Wait()
-
-	dSecs := time.Since(startTime).Seconds()
-	currEntries := logEntriesCount.Load()
-	currBytes := bytesGenerated.Load()
-	rateEntries := float64(currEntries) / dSecs
-	rateBytes := float64(currBytes) / dSecs
-	logger.Infof("ingested %dK log entries (%dMB) in %.3f seconds; avg ingestion rate: %.0fK entries/sec, %.0fMB/sec", currEntries/1e3, currBytes/1e6, dSecs, rateEntries/1e3, rateBytes/1e6)
-}
-
-var logEntriesCount atomic.Uint64
-
-var bytesGenerated atomic.Uint64
-
-type workerConfig struct {
-	url           *url.URL
-	activeStreams int
-	totalStreams  int
-}
-
-type statWriter struct {
-	w io.Writer
-}
-
-func (sw *statWriter) Write(p []byte) (int, error) {
-	bytesGenerated.Add(uint64(len(p)))
-	return sw.w.Write(p)
-}
-
-func generateAndPushLogs(cfg *workerConfig, workerID int) {
-	pr, pw := io.Pipe()
-	sw := &statWriter{
-		w: pw,
-	}
-	bw := bufio.NewWriter(sw)
-	doneCh := make(chan struct{})
-	go func() {
-		generateLogs(bw, workerID, cfg.activeStreams, cfg.totalStreams)
-		_ = bw.Flush()
-		_ = pw.Close()
-		close(doneCh)
-	}()
-
-	if cfg.url == nil {
-		_, err := io.Copy(os.Stdout, pr)
-		if err != nil {
-			logger.Fatalf("unexpected error when writing logs to stdout: %s", err)
-		}
-		return
-	}
-
-	req, err := http.NewRequest("POST", cfg.url.String(), pr)
-	if err != nil {
-		logger.Fatalf("cannot create request to %q: %s", cfg.url, err)
-	}
-
-	resp, err := http.DefaultClient.Do(req)
-	if err != nil {
-		logger.Fatalf("cannot perform request to %q: %s", cfg.url, err)
-	}
-	if resp.StatusCode/100 != 2 {
-		logger.Fatalf("unexpected status code got from %q: %d; want 2xx", cfg.url, err)
-	}
-
-	// Wait until all the generateLogs goroutine is finished.
-	<-doneCh
-}
-
-func generateLogs(bw *bufio.Writer, workerID, activeStreams, totalStreams int) {
-	streamLifetime := int64(float64(end.nsec-start.nsec) * (float64(activeStreams) / float64(totalStreams)))
-	streamStep := int64(float64(end.nsec-start.nsec) / float64(totalStreams-activeStreams+1))
-	step := streamLifetime / (*logsPerStream - 1)
-
-	currNsec := start.nsec
-	for currNsec < end.nsec {
-		firstStreamID := int((currNsec - start.nsec) / streamStep)
-		generateLogsAtTimestamp(bw, workerID, currNsec, firstStreamID, activeStreams)
-		currNsec += step
-	}
-}
-
-var runID = toUUID(rand.Uint64(), rand.Uint64())
-
-func generateLogsAtTimestamp(bw *bufio.Writer, workerID int, ts int64, firstStreamID, activeStreams int) {
-	streamID := firstStreamID
-	timeStr := toRFC3339(ts)
-	for i := 0; i < activeStreams; i++ {
-		ip := toIPv4(rand.Uint32())
-		uuid := toUUID(rand.Uint64(), rand.Uint64())
-		fmt.Fprintf(bw, `{"_time":%q,"_msg":"message for the stream %d and worker %d; ip=%s; uuid=%s; u64=%d","host":"host_%d","worker_id":"%d"`,
-			timeStr, streamID, workerID, ip, uuid, rand.Uint64(), streamID, workerID)
-		fmt.Fprintf(bw, `,"run_id":"%s"`, runID)
-		for j := 0; j < *constFieldsPerLog; j++ {
-			fmt.Fprintf(bw, `,"const_%d":"some value %d %d"`, j, j, streamID)
-		}
-		for j := 0; j < *varFieldsPerLog; j++ {
-			fmt.Fprintf(bw, `,"var_%d":"some value %d %d"`, j, j, rand.Uint64())
-		}
-		for j := 0; j < *dictFieldsPerLog; j++ {
-			fmt.Fprintf(bw, `,"dict_%d":"%s"`, j, dictValues[rand.Intn(len(dictValues))])
-		}
-		for j := 0; j < *u8FieldsPerLog; j++ {
-			fmt.Fprintf(bw, `,"u8_%d":"%d"`, j, uint8(rand.Uint32()))
-		}
-		for j := 0; j < *u16FieldsPerLog; j++ {
-			fmt.Fprintf(bw, `,"u16_%d":"%d"`, j, uint16(rand.Uint32()))
-		}
-		for j := 0; j < *u32FieldsPerLog; j++ {
-			fmt.Fprintf(bw, `,"u32_%d":"%d"`, j, rand.Uint32())
-		}
-		for j := 0; j < *u64FieldsPerLog; j++ {
-			fmt.Fprintf(bw, `,"u64_%d":"%d"`, j, rand.Uint64())
-		}
-		for j := 0; j < *floatFieldsPerLog; j++ {
-			fmt.Fprintf(bw, `,"float_%d":"%v"`, j, math.Round(10_000*rand.Float64())/1000)
-		}
-		for j := 0; j < *ipFieldsPerLog; j++ {
-			ip := toIPv4(rand.Uint32())
-			fmt.Fprintf(bw, `,"ip_%d":"%s"`, j, ip)
-		}
-		for j := 0; j < *timestampFieldsPerLog; j++ {
-			timestamp := toISO8601(int64(rand.Uint64()))
-			fmt.Fprintf(bw, `,"timestamp_%d":"%s"`, j, timestamp)
-		}
-		for j := 0; j < *jsonFieldsPerLog; j++ {
-			fmt.Fprintf(bw, `,"json_%d":"{\"foo\":\"bar_%d\",\"baz\":{\"a\":[\"x\",\"y\"]},\"f3\":NaN,\"f4\":%d}"`, j, rand.Intn(10), rand.Intn(100))
-		}
-		fmt.Fprintf(bw, "}\n")
-
-		logEntriesCount.Add(1)
-		streamID++
-	}
-}
-
-var dictValues = []string{
-	"debug",
-	"info",
-	"warn",
-	"error",
-	"fatal",
-	"ERROR",
-	"FATAL",
-	"INFO",
-}
-
-func newTimeFlag(name, defaultValue, description string) *timeFlag {
-	var tf timeFlag
-	if err := tf.Set(defaultValue); err != nil {
-		logger.Panicf("invalid defaultValue=%q for flag %q: %w", defaultValue, name, err)
-	}
-	flag.Var(&tf, name, description)
-	return &tf
-}
-
-type timeFlag struct {
-	s    string
-	nsec int64
-}
-
-func (tf *timeFlag) Set(s string) error {
-	msec, err := promutils.ParseTimeMsec(s)
-	if err != nil {
-		return fmt.Errorf("cannot parse time from %q: %w", s, err)
-	}
-	tf.s = s
-	tf.nsec = msec * 1e6
-	return nil
-}
-
-func (tf *timeFlag) String() string {
-	return tf.s
-}
-
-func toRFC3339(nsec int64) string {
-	return time.Unix(0, nsec).UTC().Format(time.RFC3339Nano)
-}
-
-func toISO8601(nsec int64) string {
-	return time.Unix(0, nsec).UTC().Format("2006-01-02T15:04:05.000Z")
-}
-
-func toIPv4(n uint32) string {
-	dst := make([]byte, 0, len("255.255.255.255"))
-	dst = marshalUint64(dst, uint64(n>>24))
-	dst = append(dst, '.')
-	dst = marshalUint64(dst, uint64((n>>16)&0xff))
-	dst = append(dst, '.')
-	dst = marshalUint64(dst, uint64((n>>8)&0xff))
-	dst = append(dst, '.')
-	dst = marshalUint64(dst, uint64(n&0xff))
-	return string(dst)
-}
-
-func toUUID(a, b uint64) string {
-	return fmt.Sprintf("%08x-%04x-%04x-%04x-%012x", a&(1<<32-1), (a>>32)&(1<<16-1), (a >> 48), b&(1<<16-1), b>>16)
-}
-
-// marshalUint64 appends string representation of n to dst and returns the result.
-func marshalUint64(dst []byte, n uint64) []byte {
-	return strconv.AppendUint(dst, n, 10)
-}

app/vlselect/logsql/buffered_writer.go

@@ -1,47 +0,0 @@
-package logsql
-
-import (
-	"bufio"
-	"io"
-	"sync"
-)
-
-func getBufferedWriter(w io.Writer) *bufferedWriter {
-	v := bufferedWriterPool.Get()
-	if v == nil {
-		return &bufferedWriter{
-			bw: bufio.NewWriter(w),
-		}
-	}
-	bw := v.(*bufferedWriter)
-	bw.bw.Reset(w)
-	return bw
-}
-
-func putBufferedWriter(bw *bufferedWriter) {
-	bw.reset()
-	bufferedWriterPool.Put(bw)
-}
-
-var bufferedWriterPool sync.Pool
-
-type bufferedWriter struct {
-	mu sync.Mutex
-	bw *bufio.Writer
-}
-
-func (bw *bufferedWriter) reset() {
-	// nothing to do
-}
-
-func (bw *bufferedWriter) WriteIgnoreErrors(p []byte) {
-	bw.mu.Lock()
-	_, _ = bw.bw.Write(p)
-	bw.mu.Unlock()
-}
-
-func (bw *bufferedWriter) FlushIgnoreErrors() {
-	bw.mu.Lock()
-	_ = bw.bw.Flush()
-	bw.mu.Unlock()
-}

app/vlselect/logsql/hits_response.qtpl

@@ -1,70 +0,0 @@
-{% import (
-	"slices"
-
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
-) %}
-
-{% stripspace %}
-
-// FieldsForHits formats labels for /select/logsql/hits response
-{% func FieldsForHits(columns []logstorage.BlockColumn, rowIdx int) %}
-{
-	{% if len(columns) > 0 %}
-		{%q= columns[0].Name %}:{%q= columns[0].Values[rowIdx] %}
-		{% for _, c := range columns[1:] %}
-			,{%q= c.Name %}:{%q= c.Values[rowIdx] %}
-		{% endfor %}
-	{% endif %}
-}
-{% endfunc %}
-
-{% func HitsSeries(m map[string]*hitsSeries) %}
-{
-	{% code
-		sortedKeys := make([]string, 0, len(m))
-		for k := range m {
-			sortedKeys = append(sortedKeys, k)
-		}
-		slices.Sort(sortedKeys)
-	%}
-	"hits":[
-		{% if len(sortedKeys) > 0 %}
-			{%= hitsSeriesLine(m, sortedKeys[0]) %}
-			{% for _, k := range sortedKeys[1:] %}
-				,{%= hitsSeriesLine(m, k) %}
-			{% endfor %}
-		{% endif %}
-	]
-}
-{% endfunc %}
-
-{% func hitsSeriesLine(m map[string]*hitsSeries, k string) %}
-{
-	{% code
-		hs := m[k]
-		hs.sort()
-		timestamps := hs.timestamps
-		hits := hs.hits
-	%}
-	"fields":{%s= k %},
-	"timestamps":[
-		{% if len(timestamps) > 0 %}
-			{%q= timestamps[0] %}
-			{% for _, ts := range timestamps[1:] %}
-				,{%q= ts %}
-			{% endfor %}
-		{% endif %}
-	],
-	"values":[
-		{% if len(hits) > 0 %}
-			{%dul= hits[0] %}
-			{% for _, v := range hits[1:] %}
-				,{%dul= v %}
-			{% endfor %}
-		{% endif %}
-	],
-	"total":{%dul= hs.hitsTotal %}
-}
-{% endfunc %}
-
-{% endstripspace %}

app/vlselect/logsql/hits_response.qtpl.go

@@ -1,223 +0,0 @@
-// Code generated by qtc from "hits_response.qtpl". DO NOT EDIT.
-// See https://github.com/valyala/quicktemplate for details.
-
-//line app/vlselect/logsql/hits_response.qtpl:1
-package logsql
-
-//line app/vlselect/logsql/hits_response.qtpl:1
-import (
-	"slices"
-
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
-)
-
-// FieldsForHits formats labels for /select/logsql/hits response
-
-//line app/vlselect/logsql/hits_response.qtpl:10
-import (
-	qtio422016 "io"
-
-	qt422016 "github.com/valyala/quicktemplate"
-)
-
-//line app/vlselect/logsql/hits_response.qtpl:10
-var (
-	_ = qtio422016.Copy
-	_ = qt422016.AcquireByteBuffer
-)
-
-//line app/vlselect/logsql/hits_response.qtpl:10
-func StreamFieldsForHits(qw422016 *qt422016.Writer, columns []logstorage.BlockColumn, rowIdx int) {
-//line app/vlselect/logsql/hits_response.qtpl:10
-	qw422016.N().S(`{`)
-//line app/vlselect/logsql/hits_response.qtpl:12
-	if len(columns) > 0 {
-//line app/vlselect/logsql/hits_response.qtpl:13
-		qw422016.N().Q(columns[0].Name)
-//line app/vlselect/logsql/hits_response.qtpl:13
-		qw422016.N().S(`:`)
-//line app/vlselect/logsql/hits_response.qtpl:13
-		qw422016.N().Q(columns[0].Values[rowIdx])
-//line app/vlselect/logsql/hits_response.qtpl:14
-		for _, c := range columns[1:] {
-//line app/vlselect/logsql/hits_response.qtpl:14
-			qw422016.N().S(`,`)
-//line app/vlselect/logsql/hits_response.qtpl:15
-			qw422016.N().Q(c.Name)
-//line app/vlselect/logsql/hits_response.qtpl:15
-			qw422016.N().S(`:`)
-//line app/vlselect/logsql/hits_response.qtpl:15
-			qw422016.N().Q(c.Values[rowIdx])
-//line app/vlselect/logsql/hits_response.qtpl:16
-		}
-//line app/vlselect/logsql/hits_response.qtpl:17
-	}
-//line app/vlselect/logsql/hits_response.qtpl:17
-	qw422016.N().S(`}`)
-//line app/vlselect/logsql/hits_response.qtpl:19
-}
-
-//line app/vlselect/logsql/hits_response.qtpl:19
-func WriteFieldsForHits(qq422016 qtio422016.Writer, columns []logstorage.BlockColumn, rowIdx int) {
-//line app/vlselect/logsql/hits_response.qtpl:19
-	qw422016 := qt422016.AcquireWriter(qq422016)
-//line app/vlselect/logsql/hits_response.qtpl:19
-	StreamFieldsForHits(qw422016, columns, rowIdx)
-//line app/vlselect/logsql/hits_response.qtpl:19
-	qt422016.ReleaseWriter(qw422016)
-//line app/vlselect/logsql/hits_response.qtpl:19
-}
-
-//line app/vlselect/logsql/hits_response.qtpl:19
-func FieldsForHits(columns []logstorage.BlockColumn, rowIdx int) string {
-//line app/vlselect/logsql/hits_response.qtpl:19
-	qb422016 := qt422016.AcquireByteBuffer()
-//line app/vlselect/logsql/hits_response.qtpl:19
-	WriteFieldsForHits(qb422016, columns, rowIdx)
-//line app/vlselect/logsql/hits_response.qtpl:19
-	qs422016 := string(qb422016.B)
-//line app/vlselect/logsql/hits_response.qtpl:19
-	qt422016.ReleaseByteBuffer(qb422016)
-//line app/vlselect/logsql/hits_response.qtpl:19
-	return qs422016
-//line app/vlselect/logsql/hits_response.qtpl:19
-}
-
-//line app/vlselect/logsql/hits_response.qtpl:21
-func StreamHitsSeries(qw422016 *qt422016.Writer, m map[string]*hitsSeries) {
-//line app/vlselect/logsql/hits_response.qtpl:21
-	qw422016.N().S(`{`)
-//line app/vlselect/logsql/hits_response.qtpl:24
-	sortedKeys := make([]string, 0, len(m))
-	for k := range m {
-		sortedKeys = append(sortedKeys, k)
-	}
-	slices.Sort(sortedKeys)
-
-//line app/vlselect/logsql/hits_response.qtpl:29
-	qw422016.N().S(`"hits":[`)
-//line app/vlselect/logsql/hits_response.qtpl:31
-	if len(sortedKeys) > 0 {
-//line app/vlselect/logsql/hits_response.qtpl:32
-		streamhitsSeriesLine(qw422016, m, sortedKeys[0])
-//line app/vlselect/logsql/hits_response.qtpl:33
-		for _, k := range sortedKeys[1:] {
-//line app/vlselect/logsql/hits_response.qtpl:33
-			qw422016.N().S(`,`)
-//line app/vlselect/logsql/hits_response.qtpl:34
-			streamhitsSeriesLine(qw422016, m, k)
-//line app/vlselect/logsql/hits_response.qtpl:35
-		}
-//line app/vlselect/logsql/hits_response.qtpl:36
-	}
-//line app/vlselect/logsql/hits_response.qtpl:36
-	qw422016.N().S(`]}`)
-//line app/vlselect/logsql/hits_response.qtpl:39
-}
-
-//line app/vlselect/logsql/hits_response.qtpl:39
-func WriteHitsSeries(qq422016 qtio422016.Writer, m map[string]*hitsSeries) {
-//line app/vlselect/logsql/hits_response.qtpl:39
-	qw422016 := qt422016.AcquireWriter(qq422016)
-//line app/vlselect/logsql/hits_response.qtpl:39
-	StreamHitsSeries(qw422016, m)
-//line app/vlselect/logsql/hits_response.qtpl:39
-	qt422016.ReleaseWriter(qw422016)
-//line app/vlselect/logsql/hits_response.qtpl:39
-}
-
-//line app/vlselect/logsql/hits_response.qtpl:39
-func HitsSeries(m map[string]*hitsSeries) string {
-//line app/vlselect/logsql/hits_response.qtpl:39
-	qb422016 := qt422016.AcquireByteBuffer()
-//line app/vlselect/logsql/hits_response.qtpl:39
-	WriteHitsSeries(qb422016, m)
-//line app/vlselect/logsql/hits_response.qtpl:39
-	qs422016 := string(qb422016.B)
-//line app/vlselect/logsql/hits_response.qtpl:39
-	qt422016.ReleaseByteBuffer(qb422016)
-//line app/vlselect/logsql/hits_response.qtpl:39
-	return qs422016
-//line app/vlselect/logsql/hits_response.qtpl:39
-}
-
-//line app/vlselect/logsql/hits_response.qtpl:41
-func streamhitsSeriesLine(qw422016 *qt422016.Writer, m map[string]*hitsSeries, k string) {
-//line app/vlselect/logsql/hits_response.qtpl:41
-	qw422016.N().S(`{`)
-//line app/vlselect/logsql/hits_response.qtpl:44
-	hs := m[k]
-	hs.sort()
-	timestamps := hs.timestamps
-	hits := hs.hits
-
-//line app/vlselect/logsql/hits_response.qtpl:48
-	qw422016.N().S(`"fields":`)
-//line app/vlselect/logsql/hits_response.qtpl:49
-	qw422016.N().S(k)
-//line app/vlselect/logsql/hits_response.qtpl:49
-	qw422016.N().S(`,"timestamps":[`)
-//line app/vlselect/logsql/hits_response.qtpl:51
-	if len(timestamps) > 0 {
-//line app/vlselect/logsql/hits_response.qtpl:52
-		qw422016.N().Q(timestamps[0])
-//line app/vlselect/logsql/hits_response.qtpl:53
-		for _, ts := range timestamps[1:] {
-//line app/vlselect/logsql/hits_response.qtpl:53
-			qw422016.N().S(`,`)
-//line app/vlselect/logsql/hits_response.qtpl:54
-			qw422016.N().Q(ts)
-//line app/vlselect/logsql/hits_response.qtpl:55
-		}
-//line app/vlselect/logsql/hits_response.qtpl:56
-	}
-//line app/vlselect/logsql/hits_response.qtpl:56
-	qw422016.N().S(`],"values":[`)
-//line app/vlselect/logsql/hits_response.qtpl:59
-	if len(hits) > 0 {
-//line app/vlselect/logsql/hits_response.qtpl:60
-		qw422016.N().DUL(hits[0])
-//line app/vlselect/logsql/hits_response.qtpl:61
-		for _, v := range hits[1:] {
-//line app/vlselect/logsql/hits_response.qtpl:61
-			qw422016.N().S(`,`)
-//line app/vlselect/logsql/hits_response.qtpl:62
-			qw422016.N().DUL(v)
-//line app/vlselect/logsql/hits_response.qtpl:63
-		}
-//line app/vlselect/logsql/hits_response.qtpl:64
-	}
-//line app/vlselect/logsql/hits_response.qtpl:64
-	qw422016.N().S(`],"total":`)
-//line app/vlselect/logsql/hits_response.qtpl:66
-	qw422016.N().DUL(hs.hitsTotal)
-//line app/vlselect/logsql/hits_response.qtpl:66
-	qw422016.N().S(`}`)
-//line app/vlselect/logsql/hits_response.qtpl:68
-}
-
-//line app/vlselect/logsql/hits_response.qtpl:68
-func writehitsSeriesLine(qq422016 qtio422016.Writer, m map[string]*hitsSeries, k string) {
-//line app/vlselect/logsql/hits_response.qtpl:68
-	qw422016 := qt422016.AcquireWriter(qq422016)
-//line app/vlselect/logsql/hits_response.qtpl:68
-	streamhitsSeriesLine(qw422016, m, k)
-//line app/vlselect/logsql/hits_response.qtpl:68
-	qt422016.ReleaseWriter(qw422016)
-//line app/vlselect/logsql/hits_response.qtpl:68
-}
-
-//line app/vlselect/logsql/hits_response.qtpl:68
-func hitsSeriesLine(m map[string]*hitsSeries, k string) string {
-//line app/vlselect/logsql/hits_response.qtpl:68
-	qb422016 := qt422016.AcquireByteBuffer()
-//line app/vlselect/logsql/hits_response.qtpl:68
-	writehitsSeriesLine(qb422016, m, k)
-//line app/vlselect/logsql/hits_response.qtpl:68
-	qs422016 := string(qb422016.B)
-//line app/vlselect/logsql/hits_response.qtpl:68
-	qt422016.ReleaseByteBuffer(qb422016)
-//line app/vlselect/logsql/hits_response.qtpl:68
-	return qs422016
-//line app/vlselect/logsql/hits_response.qtpl:68
-}

app/vlselect/logsql/logsql.go

@@ -1,771 +1,56 @@
 package logsql
 
 import (
-	"context"
-	"fmt"
-	"math"
 	"net/http"
-	"sort"
-	"strconv"
-	"strings"
-	"sync"
-	"time"
-
-	"github.com/VictoriaMetrics/metrics"
 
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vlstorage"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/bytesutil"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/flagutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httputils"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/promutils"
 )
 
-// ProcessHitsRequest handles /select/logsql/hits request.
-//
-// See https://docs.victoriametrics.com/victorialogs/querying/#querying-hits-stats
-func ProcessHitsRequest(ctx context.Context, w http.ResponseWriter, r *http.Request) {
-	q, tenantIDs, err := parseCommonArgs(r)
-	if err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-
-	// Obtain step
-	stepStr := r.FormValue("step")
-	if stepStr == "" {
-		stepStr = "1d"
-	}
-	step, err := promutils.ParseDuration(stepStr)
-	if err != nil {
-		httpserver.Errorf(w, r, "cannot parse 'step' arg: %s", err)
-		return
-	}
-	if step <= 0 {
-		httpserver.Errorf(w, r, "'step' must be bigger than zero")
-	}
-
-	// Obtain offset
-	offsetStr := r.FormValue("offset")
-	if offsetStr == "" {
-		offsetStr = "0s"
-	}
-	offset, err := promutils.ParseDuration(offsetStr)
-	if err != nil {
-		httpserver.Errorf(w, r, "cannot parse 'offset' arg: %s", err)
-		return
-	}
-
-	// Obtain field entries
-	fields := r.Form["field"]
-
-	// Obtain limit on the number of top fields entries.
-	fieldsLimit, err := httputils.GetInt(r, "fields_limit")
-	if err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-	if fieldsLimit < 0 {
-		fieldsLimit = 0
-	}
-
-	// Prepare the query for hits count.
-	q.Optimize()
-	q.DropAllPipes()
-	q.AddCountByTimePipe(int64(step), int64(offset), fields)
-
-	var mLock sync.Mutex
-	m := make(map[string]*hitsSeries)
-	writeBlock := func(_ uint, timestamps []int64, columns []logstorage.BlockColumn) {
-		if len(columns) == 0 || len(columns[0].Values) == 0 {
-			return
-		}
-
-		timestampValues := columns[0].Values
-		hitsValues := columns[len(columns)-1].Values
-		columns = columns[1 : len(columns)-1]
-
-		bb := blockResultPool.Get()
-		for i := range timestamps {
-			timestampStr := strings.Clone(timestampValues[i])
-			hitsStr := strings.Clone(hitsValues[i])
-			hits, err := strconv.ParseUint(hitsStr, 10, 64)
-			if err != nil {
-				logger.Panicf("BUG: cannot parse hitsStr=%q: %s", hitsStr, err)
-			}
-
-			bb.Reset()
-			WriteFieldsForHits(bb, columns, i)
-
-			mLock.Lock()
-			hs, ok := m[string(bb.B)]
-			if !ok {
-				k := string(bb.B)
-				hs = &hitsSeries{}
-				m[k] = hs
-			}
-			hs.timestamps = append(hs.timestamps, timestampStr)
-			hs.hits = append(hs.hits, hits)
-			hs.hitsTotal += hits
-			mLock.Unlock()
-		}
-		blockResultPool.Put(bb)
-	}
-
-	// Execute the query
-	if err := vlstorage.RunQuery(ctx, tenantIDs, q, writeBlock); err != nil {
-		httpserver.Errorf(w, r, "cannot execute query [%s]: %s", q, err)
-		return
-	}
-
-	m = getTopHitsSeries(m, fieldsLimit)
-
-	// Write response
-	w.Header().Set("Content-Type", "application/json")
-	WriteHitsSeries(w, m)
-}
-
-func getTopHitsSeries(m map[string]*hitsSeries, fieldsLimit int) map[string]*hitsSeries {
-	if fieldsLimit <= 0 || fieldsLimit >= len(m) {
-		return m
-	}
-
-	type fieldsHits struct {
-		fieldsStr string
-		hs        *hitsSeries
-	}
-	a := make([]fieldsHits, 0, len(m))
-	for fieldsStr, hs := range m {
-		a = append(a, fieldsHits{
-			fieldsStr: fieldsStr,
-			hs:        hs,
-		})
-	}
-	sort.Slice(a, func(i, j int) bool {
-		return a[i].hs.hitsTotal > a[j].hs.hitsTotal
-	})
-
-	hitsOther := make(map[string]uint64)
-	for _, x := range a[fieldsLimit:] {
-		for i, timestampStr := range x.hs.timestamps {
-			hitsOther[timestampStr] += x.hs.hits[i]
-		}
-	}
-	var hsOther hitsSeries
-	for timestampStr, hits := range hitsOther {
-		hsOther.timestamps = append(hsOther.timestamps, timestampStr)
-		hsOther.hits = append(hsOther.hits, hits)
-		hsOther.hitsTotal += hits
-	}
-
-	mNew := make(map[string]*hitsSeries, fieldsLimit+1)
-	for _, x := range a[:fieldsLimit] {
-		mNew[x.fieldsStr] = x.hs
-	}
-	mNew["{}"] = &hsOther
-
-	return mNew
-}
-
-type hitsSeries struct {
-	hitsTotal  uint64
-	timestamps []string
-	hits       []uint64
-}
-
-func (hs *hitsSeries) sort() {
-	sort.Sort(hs)
-}
-
-func (hs *hitsSeries) Len() int {
-	return len(hs.timestamps)
-}
-
-func (hs *hitsSeries) Swap(i, j int) {
-	hs.timestamps[i], hs.timestamps[j] = hs.timestamps[j], hs.timestamps[i]
-	hs.hits[i], hs.hits[j] = hs.hits[j], hs.hits[i]
-}
-
-func (hs *hitsSeries) Less(i, j int) bool {
-	return hs.timestamps[i] < hs.timestamps[j]
-}
-
-// ProcessFieldNamesRequest handles /select/logsql/field_names request.
-//
-// See https://docs.victoriametrics.com/victorialogs/querying/#querying-field-names
-func ProcessFieldNamesRequest(ctx context.Context, w http.ResponseWriter, r *http.Request) {
-	q, tenantIDs, err := parseCommonArgs(r)
-	if err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-
-	// Obtain field names for the given query
-	q.Optimize()
-	fieldNames, err := vlstorage.GetFieldNames(ctx, tenantIDs, q)
-	if err != nil {
-		httpserver.Errorf(w, r, "cannot obtain field names: %s", err)
-		return
-	}
-
-	// Write results
-	w.Header().Set("Content-Type", "application/json")
-	WriteValuesWithHitsJSON(w, fieldNames)
-}
-
-// ProcessFieldValuesRequest handles /select/logsql/field_values request.
-//
-// See https://docs.victoriametrics.com/victorialogs/querying/#querying-field-values
-func ProcessFieldValuesRequest(ctx context.Context, w http.ResponseWriter, r *http.Request) {
-	q, tenantIDs, err := parseCommonArgs(r)
-	if err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-
-	// Parse fieldName query arg
-	fieldName := r.FormValue("field")
-	if fieldName == "" {
-		httpserver.Errorf(w, r, "missing 'field' query arg")
-		return
-	}
-
-	// Parse limit query arg
-	limit, err := httputils.GetInt(r, "limit")
-	if err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-	if limit < 0 {
-		limit = 0
-	}
-
-	// Obtain unique values for the given field
-	q.Optimize()
-	values, err := vlstorage.GetFieldValues(ctx, tenantIDs, q, fieldName, uint64(limit))
-	if err != nil {
-		httpserver.Errorf(w, r, "cannot obtain values for field %q: %s", fieldName, err)
-		return
-	}
-
-	// Write results
-	w.Header().Set("Content-Type", "application/json")
-	WriteValuesWithHitsJSON(w, values)
-}
-
-// ProcessStreamFieldNamesRequest processes /select/logsql/stream_field_names request.
-//
-// See https://docs.victoriametrics.com/victorialogs/querying/#querying-stream-field-names
-func ProcessStreamFieldNamesRequest(ctx context.Context, w http.ResponseWriter, r *http.Request) {
-	q, tenantIDs, err := parseCommonArgs(r)
-	if err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-
-	// Obtain stream field names for the given query
-	q.Optimize()
-	names, err := vlstorage.GetStreamFieldNames(ctx, tenantIDs, q)
-	if err != nil {
-		httpserver.Errorf(w, r, "cannot obtain stream field names: %s", err)
-	}
-
-	// Write results
-	w.Header().Set("Content-Type", "application/json")
-	WriteValuesWithHitsJSON(w, names)
-}
-
-// ProcessStreamFieldValuesRequest processes /select/logsql/stream_field_values request.
-//
-// See https://docs.victoriametrics.com/victorialogs/querying/#querying-stream-field-values
-func ProcessStreamFieldValuesRequest(ctx context.Context, w http.ResponseWriter, r *http.Request) {
-	q, tenantIDs, err := parseCommonArgs(r)
-	if err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-
-	// Parse fieldName query arg
-	fieldName := r.FormValue("field")
-	if fieldName == "" {
-		httpserver.Errorf(w, r, "missing 'field' query arg")
-		return
-	}
-
-	// Parse limit query arg
-	limit, err := httputils.GetInt(r, "limit")
-	if err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-	if limit < 0 {
-		limit = 0
-	}
-
-	// Obtain stream field values for the given query and the given fieldName
-	q.Optimize()
-	values, err := vlstorage.GetStreamFieldValues(ctx, tenantIDs, q, fieldName, uint64(limit))
-	if err != nil {
-		httpserver.Errorf(w, r, "cannot obtain stream field values: %s", err)
-	}
-
-	// Write results
-	w.Header().Set("Content-Type", "application/json")
-	WriteValuesWithHitsJSON(w, values)
-}
-
-// ProcessStreamIDsRequest processes /select/logsql/stream_ids request.
-//
-// See https://docs.victoriametrics.com/victorialogs/querying/#querying-stream_ids
-func ProcessStreamIDsRequest(ctx context.Context, w http.ResponseWriter, r *http.Request) {
-	q, tenantIDs, err := parseCommonArgs(r)
-	if err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-
-	// Parse limit query arg
-	limit, err := httputils.GetInt(r, "limit")
-	if err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-	if limit < 0 {
-		limit = 0
-	}
-
-	// Obtain streamIDs for the given query
-	q.Optimize()
-	streamIDs, err := vlstorage.GetStreamIDs(ctx, tenantIDs, q, uint64(limit))
-	if err != nil {
-		httpserver.Errorf(w, r, "cannot obtain stream_ids: %s", err)
-	}
-
-	// Write results
-	w.Header().Set("Content-Type", "application/json")
-	WriteValuesWithHitsJSON(w, streamIDs)
-}
-
-// ProcessStreamsRequest processes /select/logsql/streams request.
-//
-// See https://docs.victoriametrics.com/victorialogs/querying/#querying-streams
-func ProcessStreamsRequest(ctx context.Context, w http.ResponseWriter, r *http.Request) {
-	q, tenantIDs, err := parseCommonArgs(r)
-	if err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-
-	// Parse limit query arg
-	limit, err := httputils.GetInt(r, "limit")
-	if err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-	if limit < 0 {
-		limit = 0
-	}
-
-	// Obtain streams for the given query
-	q.Optimize()
-	streams, err := vlstorage.GetStreams(ctx, tenantIDs, q, uint64(limit))
-	if err != nil {
-		httpserver.Errorf(w, r, "cannot obtain streams: %s", err)
-	}
-
-	// Write results
-	w.Header().Set("Content-Type", "application/json")
-	WriteValuesWithHitsJSON(w, streams)
-}
-
-// ProcessLiveTailRequest processes live tailing request to /select/logsq/tail
-func ProcessLiveTailRequest(ctx context.Context, w http.ResponseWriter, r *http.Request) {
-	liveTailRequests.Inc()
-	defer liveTailRequests.Dec()
-
-	q, tenantIDs, err := parseCommonArgs(r)
-	if err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-	if !q.CanLiveTail() {
-		httpserver.Errorf(w, r, "the query [%s] cannot be used in live tailing; see https://docs.victoriametrics.com/victorialogs/querying/#live-tailing for details", q)
-	}
-	q.Optimize()
-
-	refreshIntervalMsecs, err := httputils.GetDuration(r, "refresh_interval", 1000)
-	if err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-	refreshInterval := time.Millisecond * time.Duration(refreshIntervalMsecs)
-
-	ctxWithCancel, cancel := context.WithCancel(ctx)
-	tp := newTailProcessor(cancel)
-
-	ticker := time.NewTicker(refreshInterval)
-	defer ticker.Stop()
-
-	end := time.Now().UnixNano()
-	doneCh := ctxWithCancel.Done()
-	flusher, ok := w.(http.Flusher)
-	if !ok {
-		logger.Panicf("BUG: it is expected that http.ResponseWriter (%T) supports http.Flusher interface", w)
-	}
-	for {
-		start := end - tailOffsetNsecs
-		end = time.Now().UnixNano()
-
-		qCopy := q.Clone()
-		qCopy.AddTimeFilter(start, end)
-		if err := vlstorage.RunQuery(ctxWithCancel, tenantIDs, qCopy, tp.writeBlock); err != nil {
-			httpserver.Errorf(w, r, "cannot execute tail query [%s]: %s", q, err)
-			return
-		}
-		resultRows, err := tp.getTailRows()
-		if err != nil {
-			httpserver.Errorf(w, r, "cannot get tail results for query [%q]: %s", q, err)
-			return
-		}
-		if len(resultRows) > 0 {
-			WriteJSONRows(w, resultRows)
-			flusher.Flush()
-		}
-
-		select {
-		case <-doneCh:
-			return
-		case <-ticker.C:
-		}
-	}
-}
-
-var liveTailRequests = metrics.NewCounter(`vl_live_tailing_requests`)
-
-const tailOffsetNsecs = 5e9
-
-type logRow struct {
-	timestamp int64
-	fields    []logstorage.Field
-}
-
-func sortLogRows(rows []logRow) {
-	sort.SliceStable(rows, func(i, j int) bool {
-		return rows[i].timestamp < rows[j].timestamp
-	})
-}
-
-type tailProcessor struct {
-	cancel func()
-
-	mu sync.Mutex
-
-	perStreamRows  map[string][]logRow
-	lastTimestamps map[string]int64
-
-	err error
-}
-
-func newTailProcessor(cancel func()) *tailProcessor {
-	return &tailProcessor{
-		cancel: cancel,
-
-		perStreamRows:  make(map[string][]logRow),
-		lastTimestamps: make(map[string]int64),
-	}
-}
-
-func (tp *tailProcessor) writeBlock(_ uint, timestamps []int64, columns []logstorage.BlockColumn) {
-	if len(timestamps) == 0 {
-		return
-	}
-
-	tp.mu.Lock()
-	defer tp.mu.Unlock()
-
-	if tp.err != nil {
-		return
-	}
-
-	// Make sure columns contain _time field, since it is needed for proper tail work.
-	hasTime := false
-	for _, c := range columns {
-		if c.Name == "_time" {
-			hasTime = true
-			break
-		}
-	}
-	if !hasTime {
-		tp.err = fmt.Errorf("missing _time field")
-		tp.cancel()
-		return
-	}
-
-	// Copy block rows to tp.perStreamRows
-	for i, timestamp := range timestamps {
-		streamID := ""
-		fields := make([]logstorage.Field, len(columns))
-		for j, c := range columns {
-			name := strings.Clone(c.Name)
-			value := strings.Clone(c.Values[i])
-
-			fields[j] = logstorage.Field{
-				Name:  name,
-				Value: value,
-			}
-
-			if name == "_stream_id" {
-				streamID = value
-			}
-		}
-
-		tp.perStreamRows[streamID] = append(tp.perStreamRows[streamID], logRow{
-			timestamp: timestamp,
-			fields:    fields,
-		})
-	}
-}
-
-func (tp *tailProcessor) getTailRows() ([][]logstorage.Field, error) {
-	if tp.err != nil {
-		return nil, tp.err
-	}
-
-	var resultRows []logRow
-	for streamID, rows := range tp.perStreamRows {
-		sortLogRows(rows)
-
-		lastTimestamp, ok := tp.lastTimestamps[streamID]
-		if ok {
-			// Skip already written rows
-			for len(rows) > 0 && rows[0].timestamp <= lastTimestamp {
-				rows = rows[1:]
-			}
-		}
-		if len(rows) > 0 {
-			resultRows = append(resultRows, rows...)
-			tp.lastTimestamps[streamID] = rows[len(rows)-1].timestamp
-		}
-	}
-	clear(tp.perStreamRows)
-
-	sortLogRows(resultRows)
-
-	tailRows := make([][]logstorage.Field, len(resultRows))
-	for i, row := range resultRows {
-		tailRows[i] = row.fields
-	}
-
-	return tailRows, nil
-}
-
-// ProcessQueryRequest handles /select/logsql/query request.
-//
-// See https://docs.victoriametrics.com/victorialogs/querying/#http-api
-func ProcessQueryRequest(ctx context.Context, w http.ResponseWriter, r *http.Request) {
-	q, tenantIDs, err := parseCommonArgs(r)
-	if err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-
-	// Parse limit query arg
-	limit, err := httputils.GetInt(r, "limit")
-	if err != nil {
-		httpserver.Errorf(w, r, "%s", err)
-		return
-	}
-
-	bw := getBufferedWriter(w)
-	defer func() {
-		bw.FlushIgnoreErrors()
-		putBufferedWriter(bw)
-	}()
-	w.Header().Set("Content-Type", "application/stream+json")
-
-	if limit > 0 {
-		if q.CanReturnLastNResults() {
-			rows, err := getLastNQueryResults(ctx, tenantIDs, q, limit)
-			if err != nil {
-				httpserver.Errorf(w, r, "%s", err)
-				return
-			}
-			bb := blockResultPool.Get()
-			b := bb.B
-			for i := range rows {
-				b = logstorage.MarshalFieldsToJSON(b[:0], rows[i].fields)
-				b = append(b, '\n')
-				bw.WriteIgnoreErrors(b)
-			}
-			bb.B = b
-			blockResultPool.Put(bb)
-			return
-		}
-
-		q.AddPipeLimit(uint64(limit))
-	}
-	q.Optimize()
-
-	writeBlock := func(_ uint, timestamps []int64, columns []logstorage.BlockColumn) {
-		if len(columns) == 0 || len(columns[0].Values) == 0 {
-			return
-		}
-
-		bb := blockResultPool.Get()
-		for i := range timestamps {
-			WriteJSONRow(bb, columns, i)
-		}
-		bw.WriteIgnoreErrors(bb.B)
-		blockResultPool.Put(bb)
-	}
-
-	if err := vlstorage.RunQuery(ctx, tenantIDs, q, writeBlock); err != nil {
-		httpserver.Errorf(w, r, "cannot execute query [%s]: %s", q, err)
-		return
-	}
-}
-
-var blockResultPool bytesutil.ByteBufferPool
-
-type row struct {
-	timestamp int64
-	fields    []logstorage.Field
-}
-
-func getLastNQueryResults(ctx context.Context, tenantIDs []logstorage.TenantID, q *logstorage.Query, limit int) ([]row, error) {
-	limitUpper := 2 * limit
-	q.AddPipeLimit(uint64(limitUpper))
-	q.Optimize()
-	rows, err := getQueryResultsWithLimit(ctx, tenantIDs, q, limitUpper)
-	if err != nil {
-		return nil, err
-	}
-	if len(rows) < limitUpper {
-		// Fast path - the requested time range contains up to limitUpper rows.
-		rows = getLastNRows(rows, limit)
-		return rows, nil
-	}
-
-	// Slow path - search for the time range containing up to limitUpper rows.
-	start, end := q.GetFilterTimeRange()
-	d := end/2 - start/2
-	start += d
-
-	qOrig := q
-	for {
-		q = qOrig.Clone()
-		q.AddTimeFilter(start, end)
-		rows, err := getQueryResultsWithLimit(ctx, tenantIDs, q, limitUpper)
-		if err != nil {
-			return nil, err
-		}
-
-		if len(rows) >= limit && len(rows) < limitUpper || d == 0 {
-			rows = getLastNRows(rows, limit)
-			return rows, nil
-		}
-
-		lastBit := d & 1
-		d /= 2
-		if len(rows) > limit {
-			start += d
-		} else {
-			start -= d + lastBit
-		}
-	}
-}
-
-func getLastNRows(rows []row, limit int) []row {
-	sort.Slice(rows, func(i, j int) bool {
-		return rows[i].timestamp < rows[j].timestamp
-	})
-	if len(rows) > limit {
-		rows = rows[len(rows)-limit:]
-	}
-	return rows
-}
-
-func getQueryResultsWithLimit(ctx context.Context, tenantIDs []logstorage.TenantID, q *logstorage.Query, limit int) ([]row, error) {
-	ctxWithCancel, cancel := context.WithCancel(ctx)
-	defer cancel()
-
-	var rows []row
-	var rowsLock sync.Mutex
-	writeBlock := func(_ uint, timestamps []int64, columns []logstorage.BlockColumn) {
-		rowsLock.Lock()
-		defer rowsLock.Unlock()
-
-		for i, timestamp := range timestamps {
-			fields := make([]logstorage.Field, len(columns))
-			for j := range columns {
-				f := &fields[j]
-				f.Name = strings.Clone(columns[j].Name)
-				f.Value = strings.Clone(columns[j].Values[i])
-			}
-			rows = append(rows, row{
-				timestamp: timestamp,
-				fields:    fields,
-			})
-		}
-
-		if len(rows) >= limit {
-			cancel()
-		}
-	}
-	if err := vlstorage.RunQuery(ctxWithCancel, tenantIDs, q, writeBlock); err != nil {
-		return nil, err
-	}
-
-	return rows, nil
-}
-
-func parseCommonArgs(r *http.Request) (*logstorage.Query, []logstorage.TenantID, error) {
+var (
+	maxSortBufferSize = flagutil.NewBytes("select.maxSortBufferSize", 1024*1024, "Query results from /select/logsql/query are automatically sorted by _time "+
+		"if their summary size doesn't exceed this value; otherwise, query results are streamed in the response without sorting; "+
+		"too big value for this flag may result in high memory usage since the sorting is performed in memory")
+)
+
+// ProcessQueryRequest handles /select/logsql/query request
+func ProcessQueryRequest(w http.ResponseWriter, r *http.Request, stopCh <-chan struct{}) {
 	// Extract tenantID
 	tenantID, err := logstorage.GetTenantIDFromRequest(r)
 	if err != nil {
-		return nil, nil, fmt.Errorf("cannot obtain tenanID: %w", err)
+		httpserver.Errorf(w, r, "%s", err)
+		return
 	}
-	tenantIDs := []logstorage.TenantID{tenantID}
 
-	// Parse query
 	qStr := r.FormValue("query")
 	q, err := logstorage.ParseQuery(qStr)
 	if err != nil {
-		return nil, nil, fmt.Errorf("cannot parse query [%s]: %s", qStr, err)
+		httpserver.Errorf(w, r, "cannot parse query [%s]: %s", qStr, err)
+		return
 	}
+	w.Header().Set("Content-Type", "application/stream+json; charset=utf-8")
 
-	// Parse optional start and end args
-	start, okStart, err := getTimeNsec(r, "start")
-	if err != nil {
-		return nil, nil, err
-	}
-	end, okEnd, err := getTimeNsec(r, "end")
-	if err != nil {
-		return nil, nil, err
-	}
-	if okStart || okEnd {
-		if !okStart {
-			start = math.MinInt64
+	sw := getSortWriter()
+	sw.Init(w, maxSortBufferSize.IntN())
+	tenantIDs := []logstorage.TenantID{tenantID}
+	vlstorage.RunQuery(tenantIDs, q, stopCh, func(columns []logstorage.BlockColumn) {
+		if len(columns) == 0 {
+			return
 		}
-		if !okEnd {
-			end = math.MaxInt64
-		}
-		q.AddTimeFilter(start, end)
-	}
+		rowsCount := len(columns[0].Values)
 
-	return q, tenantIDs, nil
+		bb := blockResultPool.Get()
+		for rowIdx := 0; rowIdx < rowsCount; rowIdx++ {
+			WriteJSONRow(bb, columns, rowIdx)
+		}
+		sw.MustWrite(bb.B)
+		blockResultPool.Put(bb)
+	})
+	sw.FinalFlush()
+	putSortWriter(sw)
 }
 
-func getTimeNsec(r *http.Request, argName string) (int64, bool, error) {
-	s := r.FormValue(argName)
-	if s == "" {
-		return 0, false, nil
-	}
-	currentTimestamp := time.Now().UnixNano()
-	nsecs, err := promutils.ParseTimeAt(s, currentTimestamp)
-	if err != nil {
-		return 0, false, fmt.Errorf("cannot parse %s=%s: %w", argName, s, err)
-	}
-	return nsecs, true, nil
-}
+var blockResultPool bytesutil.ByteBufferPool

app/vlselect/logsql/logsql.qtpl

@@ -1,32 +0,0 @@
-{% import (
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
-) %}
-
-{% stripspace %}
-
-// ValuesWithHitsJSON generates JSON from the given values.
-{% func ValuesWithHitsJSON(values []logstorage.ValueWithHits) %}
-{
-	"values":{%= valuesWithHitsJSONArray(values) %}
-}
-{% endfunc %}
-
-{% func valuesWithHitsJSONArray(values []logstorage.ValueWithHits) %}
-[
-	{% if len(values) > 0 %}
-		{%= valueWithHitsJSON(values[0]) %}
-		{% for _, v := range values[1:] %}
-			,{%= valueWithHitsJSON(v) %}
-		{% endfor %}
-	{% endif %}
-]
-{% endfunc %}
-
-{% func valueWithHitsJSON(v logstorage.ValueWithHits) %}
-{
-	"value":{%q= v.Value %},
-	"hits":{%dul= v.Hits %}
-}
-{% endfunc %}
-
-{% endstripspace %}

app/vlselect/logsql/logsql.qtpl.go

@@ -1,152 +0,0 @@
-// Code generated by qtc from "logsql.qtpl". DO NOT EDIT.
-// See https://github.com/valyala/quicktemplate for details.
-
-//line app/vlselect/logsql/logsql.qtpl:1
-package logsql
-
-//line app/vlselect/logsql/logsql.qtpl:1
-import (
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
-)
-
-// ValuesWithHitsJSON generates JSON from the given values.
-
-//line app/vlselect/logsql/logsql.qtpl:8
-import (
-	qtio422016 "io"
-
-	qt422016 "github.com/valyala/quicktemplate"
-)
-
-//line app/vlselect/logsql/logsql.qtpl:8
-var (
-	_ = qtio422016.Copy
-	_ = qt422016.AcquireByteBuffer
-)
-
-//line app/vlselect/logsql/logsql.qtpl:8
-func StreamValuesWithHitsJSON(qw422016 *qt422016.Writer, values []logstorage.ValueWithHits) {
-//line app/vlselect/logsql/logsql.qtpl:8
-	qw422016.N().S(`{"values":`)
-//line app/vlselect/logsql/logsql.qtpl:10
-	streamvaluesWithHitsJSONArray(qw422016, values)
-//line app/vlselect/logsql/logsql.qtpl:10
-	qw422016.N().S(`}`)
-//line app/vlselect/logsql/logsql.qtpl:12
-}
-
-//line app/vlselect/logsql/logsql.qtpl:12
-func WriteValuesWithHitsJSON(qq422016 qtio422016.Writer, values []logstorage.ValueWithHits) {
-//line app/vlselect/logsql/logsql.qtpl:12
-	qw422016 := qt422016.AcquireWriter(qq422016)
-//line app/vlselect/logsql/logsql.qtpl:12
-	StreamValuesWithHitsJSON(qw422016, values)
-//line app/vlselect/logsql/logsql.qtpl:12
-	qt422016.ReleaseWriter(qw422016)
-//line app/vlselect/logsql/logsql.qtpl:12
-}
-
-//line app/vlselect/logsql/logsql.qtpl:12
-func ValuesWithHitsJSON(values []logstorage.ValueWithHits) string {
-//line app/vlselect/logsql/logsql.qtpl:12
-	qb422016 := qt422016.AcquireByteBuffer()
-//line app/vlselect/logsql/logsql.qtpl:12
-	WriteValuesWithHitsJSON(qb422016, values)
-//line app/vlselect/logsql/logsql.qtpl:12
-	qs422016 := string(qb422016.B)
-//line app/vlselect/logsql/logsql.qtpl:12
-	qt422016.ReleaseByteBuffer(qb422016)
-//line app/vlselect/logsql/logsql.qtpl:12
-	return qs422016
-//line app/vlselect/logsql/logsql.qtpl:12
-}
-
-//line app/vlselect/logsql/logsql.qtpl:14
-func streamvaluesWithHitsJSONArray(qw422016 *qt422016.Writer, values []logstorage.ValueWithHits) {
-//line app/vlselect/logsql/logsql.qtpl:14
-	qw422016.N().S(`[`)
-//line app/vlselect/logsql/logsql.qtpl:16
-	if len(values) > 0 {
-//line app/vlselect/logsql/logsql.qtpl:17
-		streamvalueWithHitsJSON(qw422016, values[0])
-//line app/vlselect/logsql/logsql.qtpl:18
-		for _, v := range values[1:] {
-//line app/vlselect/logsql/logsql.qtpl:18
-			qw422016.N().S(`,`)
-//line app/vlselect/logsql/logsql.qtpl:19
-			streamvalueWithHitsJSON(qw422016, v)
-//line app/vlselect/logsql/logsql.qtpl:20
-		}
-//line app/vlselect/logsql/logsql.qtpl:21
-	}
-//line app/vlselect/logsql/logsql.qtpl:21
-	qw422016.N().S(`]`)
-//line app/vlselect/logsql/logsql.qtpl:23
-}
-
-//line app/vlselect/logsql/logsql.qtpl:23
-func writevaluesWithHitsJSONArray(qq422016 qtio422016.Writer, values []logstorage.ValueWithHits) {
-//line app/vlselect/logsql/logsql.qtpl:23
-	qw422016 := qt422016.AcquireWriter(qq422016)
-//line app/vlselect/logsql/logsql.qtpl:23
-	streamvaluesWithHitsJSONArray(qw422016, values)
-//line app/vlselect/logsql/logsql.qtpl:23
-	qt422016.ReleaseWriter(qw422016)
-//line app/vlselect/logsql/logsql.qtpl:23
-}
-
-//line app/vlselect/logsql/logsql.qtpl:23
-func valuesWithHitsJSONArray(values []logstorage.ValueWithHits) string {
-//line app/vlselect/logsql/logsql.qtpl:23
-	qb422016 := qt422016.AcquireByteBuffer()
-//line app/vlselect/logsql/logsql.qtpl:23
-	writevaluesWithHitsJSONArray(qb422016, values)
-//line app/vlselect/logsql/logsql.qtpl:23
-	qs422016 := string(qb422016.B)
-//line app/vlselect/logsql/logsql.qtpl:23
-	qt422016.ReleaseByteBuffer(qb422016)
-//line app/vlselect/logsql/logsql.qtpl:23
-	return qs422016
-//line app/vlselect/logsql/logsql.qtpl:23
-}
-
-//line app/vlselect/logsql/logsql.qtpl:25
-func streamvalueWithHitsJSON(qw422016 *qt422016.Writer, v logstorage.ValueWithHits) {
-//line app/vlselect/logsql/logsql.qtpl:25
-	qw422016.N().S(`{"value":`)
-//line app/vlselect/logsql/logsql.qtpl:27
-	qw422016.N().Q(v.Value)
-//line app/vlselect/logsql/logsql.qtpl:27
-	qw422016.N().S(`,"hits":`)
-//line app/vlselect/logsql/logsql.qtpl:28
-	qw422016.N().DUL(v.Hits)
-//line app/vlselect/logsql/logsql.qtpl:28
-	qw422016.N().S(`}`)
-//line app/vlselect/logsql/logsql.qtpl:30
-}
-
-//line app/vlselect/logsql/logsql.qtpl:30
-func writevalueWithHitsJSON(qq422016 qtio422016.Writer, v logstorage.ValueWithHits) {
-//line app/vlselect/logsql/logsql.qtpl:30
-	qw422016 := qt422016.AcquireWriter(qq422016)
-//line app/vlselect/logsql/logsql.qtpl:30
-	streamvalueWithHitsJSON(qw422016, v)
-//line app/vlselect/logsql/logsql.qtpl:30
-	qt422016.ReleaseWriter(qw422016)
-//line app/vlselect/logsql/logsql.qtpl:30
-}
-
-//line app/vlselect/logsql/logsql.qtpl:30
-func valueWithHitsJSON(v logstorage.ValueWithHits) string {
-//line app/vlselect/logsql/logsql.qtpl:30
-	qb422016 := qt422016.AcquireByteBuffer()
-//line app/vlselect/logsql/logsql.qtpl:30
-	writevalueWithHitsJSON(qb422016, v)
-//line app/vlselect/logsql/logsql.qtpl:30
-	qs422016 := string(qb422016.B)
-//line app/vlselect/logsql/logsql.qtpl:30
-	qt422016.ReleaseByteBuffer(qb422016)
-//line app/vlselect/logsql/logsql.qtpl:30
-	return qs422016
-//line app/vlselect/logsql/logsql.qtpl:30
-}

app/vlselect/logsql/sort_writer.go

@@ -0,0 +1,225 @@
+package logsql
+
+import (
+	"bytes"
+	"io"
+	"sort"
+	"sync"
+
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/bytesutil"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logjson"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
+)
+
+func getSortWriter() *sortWriter {
+	v := sortWriterPool.Get()
+	if v == nil {
+		return &sortWriter{}
+	}
+	return v.(*sortWriter)
+}
+
+func putSortWriter(sw *sortWriter) {
+	sw.reset()
+	sortWriterPool.Put(sw)
+}
+
+var sortWriterPool sync.Pool
+
+// sortWriter expects JSON line stream to be written to it.
+//
+// It buffers the incoming data until its size reaches maxBufLen.
+// Then it streams the buffered data and all the incoming data to w.
+//
+// The FinalFlush() must be called when all the data is written.
+// If the buf isn't empty at FinalFlush() call, then the buffered data
+// is sorted by _time field.
+type sortWriter struct {
+	mu         sync.Mutex
+	w          io.Writer
+	maxBufLen  int
+	buf        []byte
+	bufFlushed bool
+
+	hasErr bool
+}
+
+func (sw *sortWriter) reset() {
+	sw.w = nil
+	sw.maxBufLen = 0
+	sw.buf = sw.buf[:0]
+	sw.bufFlushed = false
+	sw.hasErr = false
+}
+
+func (sw *sortWriter) Init(w io.Writer, maxBufLen int) {
+	sw.reset()
+
+	sw.w = w
+	sw.maxBufLen = maxBufLen
+}
+
+func (sw *sortWriter) MustWrite(p []byte) {
+	sw.mu.Lock()
+	defer sw.mu.Unlock()
+
+	if sw.hasErr {
+		return
+	}
+
+	if sw.bufFlushed {
+		if _, err := sw.w.Write(p); err != nil {
+			sw.hasErr = true
+		}
+		return
+	}
+	if len(sw.buf)+len(p) < sw.maxBufLen {
+		sw.buf = append(sw.buf, p...)
+		return
+	}
+	sw.bufFlushed = true
+	if len(sw.buf) > 0 {
+		if _, err := sw.w.Write(sw.buf); err != nil {
+			sw.hasErr = true
+			return
+		}
+		sw.buf = sw.buf[:0]
+	}
+	if _, err := sw.w.Write(p); err != nil {
+		sw.hasErr = true
+	}
+}
+
+func (sw *sortWriter) FinalFlush() {
+	if sw.hasErr || sw.bufFlushed {
+		return
+	}
+	rs := getRowsSorter()
+	rs.parseRows(sw.buf)
+	rs.sort()
+	WriteJSONRows(sw.w, rs.rows)
+	putRowsSorter(rs)
+}
+
+func getRowsSorter() *rowsSorter {
+	v := rowsSorterPool.Get()
+	if v == nil {
+		return &rowsSorter{}
+	}
+	return v.(*rowsSorter)
+}
+
+func putRowsSorter(rs *rowsSorter) {
+	rs.reset()
+	rowsSorterPool.Put(rs)
+}
+
+var rowsSorterPool sync.Pool
+
+type rowsSorter struct {
+	buf       []byte
+	fieldsBuf []logstorage.Field
+	rows      [][]logstorage.Field
+	times     []string
+}
+
+func (rs *rowsSorter) reset() {
+	rs.buf = rs.buf[:0]
+
+	fieldsBuf := rs.fieldsBuf
+	for i := range fieldsBuf {
+		fieldsBuf[i].Reset()
+	}
+	rs.fieldsBuf = fieldsBuf[:0]
+
+	rows := rs.rows
+	for i := range rows {
+		rows[i] = nil
+	}
+	rs.rows = rows[:0]
+
+	times := rs.times
+	for i := range times {
+		times[i] = ""
+	}
+	rs.times = times[:0]
+}
+
+func (rs *rowsSorter) parseRows(src []byte) {
+	rs.reset()
+
+	buf := rs.buf
+	fieldsBuf := rs.fieldsBuf
+	rows := rs.rows
+	times := rs.times
+
+	p := logjson.GetParser()
+	for len(src) > 0 {
+		var line []byte
+		n := bytes.IndexByte(src, '\n')
+		if n < 0 {
+			line = src
+			src = nil
+		} else {
+			line = src[:n]
+			src = src[n+1:]
+		}
+		if len(line) == 0 {
+			continue
+		}
+
+		if err := p.ParseLogMessage(line); err != nil {
+			logger.Panicf("BUG: unexpected invalid JSON line: %s", err)
+		}
+
+		timeValue := ""
+		fieldsBufLen := len(fieldsBuf)
+		for _, f := range p.Fields {
+			bufLen := len(buf)
+			buf = append(buf, f.Name...)
+			name := bytesutil.ToUnsafeString(buf[bufLen:])
+
+			bufLen = len(buf)
+			buf = append(buf, f.Value...)
+			value := bytesutil.ToUnsafeString(buf[bufLen:])
+
+			fieldsBuf = append(fieldsBuf, logstorage.Field{
+				Name:  name,
+				Value: value,
+			})
+
+			if name == "_time" {
+				timeValue = value
+			}
+		}
+		rows = append(rows, fieldsBuf[fieldsBufLen:])
+		times = append(times, timeValue)
+	}
+	logjson.PutParser(p)
+
+	rs.buf = buf
+	rs.fieldsBuf = fieldsBuf
+	rs.rows = rows
+	rs.times = times
+}
+
+func (rs *rowsSorter) Len() int {
+	return len(rs.rows)
+}
+
+func (rs *rowsSorter) Less(i, j int) bool {
+	times := rs.times
+	return times[i] < times[j]
+}
+
+func (rs *rowsSorter) Swap(i, j int) {
+	times := rs.times
+	rows := rs.rows
+	times[i], times[j] = times[j], times[i]
+	rows[i], rows[j] = rows[j], rows[i]
+}
+
+func (rs *rowsSorter) sort() {
+	sort.Sort(rs)
+}

app/vlselect/logsql/sort_writer_test.go

@@ -0,0 +1,39 @@
+package logsql
+
+import (
+	"bytes"
+	"strings"
+	"testing"
+)
+
+func TestSortWriter(t *testing.T) {
+	f := func(maxBufLen int, data string, expectedResult string) {
+		t.Helper()
+
+		var bb bytes.Buffer
+		sw := getSortWriter()
+		sw.Init(&bb, maxBufLen)
+
+		for _, s := range strings.Split(data, "\n") {
+			sw.MustWrite([]byte(s + "\n"))
+		}
+		sw.FinalFlush()
+		putSortWriter(sw)
+
+		result := bb.String()
+		if result != expectedResult {
+			t.Fatalf("unexpected result;\ngot\n%s\nwant\n%s", result, expectedResult)
+		}
+	}
+
+	f(100, "", "")
+	f(100, "{}", "{}\n")
+
+	data := `{"_time":"def","_msg":"xxx"}
+{"_time":"abc","_msg":"foo"}`
+	resultExpected := `{"_time":"abc","_msg":"foo"}
+{"_time":"def","_msg":"xxx"}
+`
+	f(100, data, resultExpected)
+	f(10, data, data+"\n")
+}

app/vlselect/main.go

@@ -1,7 +1,6 @@
 package vlselect
 
 import (
-	"context"
 	"embed"
 	"flag"
 	"fmt"
@@ -14,6 +13,7 @@ import (
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httputils"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/timerpool"
 	"github.com/VictoriaMetrics/metrics"
 )
 
@@ -23,7 +23,7 @@ var (
 		"See also -search.maxQueueDuration")
 	maxQueueDuration = flag.Duration("search.maxQueueDuration", 10*time.Second, "The maximum time the search request waits for execution when -search.maxConcurrentRequests "+
 		"limit is reached; see also -search.maxQueryDuration")
-	maxQueryDuration = flag.Duration("search.maxQueryDuration", time.Second*30, "The maximum duration for query execution. It can be overridden on a per-query basis via 'timeout' query arg")
+	maxQueryDuration = flag.Duration("search.maxQueryDuration", time.Second*30, "The maximum duration for query execution")
 )
 
 func getDefaultMaxConcurrentRequests() int {
@@ -75,9 +75,10 @@ func RequestHandler(w http.ResponseWriter, r *http.Request) bool {
 		// Skip requests, which do not start with /select/, since these aren't our requests.
 		return false
 	}
+	path = strings.TrimPrefix(path, "/select")
 	path = strings.ReplaceAll(path, "//", "/")
 
-	if path == "/select/vmui" {
+	if path == "/vmui" {
 		// VMUI access via incomplete url without `/` in the end. Redirect to complete url.
 		// Use relative redirect, since the hostname and path prefix may be incorrect if VictoriaMetrics
 		// is hidden behind vmauth or similar proxy.
@@ -86,128 +87,57 @@ func RequestHandler(w http.ResponseWriter, r *http.Request) bool {
 		httpserver.Redirect(w, newURL)
 		return true
 	}
-	if strings.HasPrefix(path, "/select/vmui/") {
-		if strings.HasPrefix(path, "/select/vmui/static/") {
-			// Allow clients caching static contents for long period of time, since it shouldn't change over time.
-			// Path to static contents (such as js and css) must be changed whenever its contents is changed.
-			// See https://developer.chrome.com/docs/lighthouse/performance/uses-long-cache-ttl/
-			w.Header().Set("Cache-Control", "max-age=31536000")
-		}
-		r.URL.Path = strings.TrimPrefix(path, "/select")
+	if strings.HasPrefix(path, "/vmui/") {
+		r.URL.Path = path
 		vmuiFileServer.ServeHTTP(w, r)
 		return true
 	}
 
-	// Limit the number of concurrent queries, which can consume big amounts of CPU time.
+	// Limit the number of concurrent queries, which can consume big amounts of CPU.
 	startTime := time.Now()
-	ctx := r.Context()
-	d := getMaxQueryDuration(r)
-	ctxWithTimeout, cancel := context.WithTimeout(ctx, d)
-	defer cancel()
-
-	stopCh := ctxWithTimeout.Done()
+	stopCh := r.Context().Done()
 	select {
 	case concurrencyLimitCh <- struct{}{}:
 		defer func() { <-concurrencyLimitCh }()
 	default:
 		// Sleep for a while until giving up. This should resolve short bursts in requests.
 		concurrencyLimitReached.Inc()
+		d := getMaxQueryDuration(r)
+		if d > *maxQueueDuration {
+			d = *maxQueueDuration
+		}
+		t := timerpool.Get(d)
 		select {
 		case concurrencyLimitCh <- struct{}{}:
+			timerpool.Put(t)
 			defer func() { <-concurrencyLimitCh }()
 		case <-stopCh:
-			switch ctxWithTimeout.Err() {
-			case context.Canceled:
-				remoteAddr := httpserver.GetQuotedRemoteAddr(r)
-				requestURI := httpserver.GetRequestURI(r)
-				logger.Infof("client has canceled the pending request after %.3f seconds: remoteAddr=%s, requestURI: %q",
-					time.Since(startTime).Seconds(), remoteAddr, requestURI)
-			case context.DeadlineExceeded:
-				concurrencyLimitTimeout.Inc()
-				err := &httpserver.ErrorWithStatusCode{
-					Err: fmt.Errorf("couldn't start executing the request in %.3f seconds, since -search.maxConcurrentRequests=%d concurrent requests "+
-						"are executed. Possible solutions: to reduce query load; to add more compute resources to the server; "+
-						"to increase -search.maxQueueDuration=%s; to increase -search.maxQueryDuration=%s; to increase -search.maxConcurrentRequests; "+
-						"to pass bigger value to 'timeout' query arg",
-						d.Seconds(), *maxConcurrentRequests, maxQueueDuration, maxQueryDuration),
-					StatusCode: http.StatusServiceUnavailable,
-				}
-				httpserver.Errorf(w, r, "%s", err)
+			timerpool.Put(t)
+			remoteAddr := httpserver.GetQuotedRemoteAddr(r)
+			requestURI := httpserver.GetRequestURI(r)
+			logger.Infof("client has cancelled the request after %.3f seconds: remoteAddr=%s, requestURI: %q",
+				time.Since(startTime).Seconds(), remoteAddr, requestURI)
+			return true
+		case <-t.C:
+			timerpool.Put(t)
+			concurrencyLimitTimeout.Inc()
+			err := &httpserver.ErrorWithStatusCode{
+				Err: fmt.Errorf("couldn't start executing the request in %.3f seconds, since -search.maxConcurrentRequests=%d concurrent requests "+
+					"are executed. Possible solutions: to reduce query load; to add more compute resources to the server; "+
+					"to increase -search.maxQueueDuration=%s; to increase -search.maxQueryDuration; to increase -search.maxConcurrentRequests",
+					d.Seconds(), *maxConcurrentRequests, maxQueueDuration),
+				StatusCode: http.StatusServiceUnavailable,
 			}
+			httpserver.Errorf(w, r, "%s", err)
 			return true
 		}
 	}
 
-	if path == "/select/logsql/tail" {
-		logsqlTailRequests.Inc()
-		// Process live tailing request without timeout (e.g. use ctx instead of ctxWithTimeout),
-		// since it is OK to run live tailing requests for very long time.
-		logsql.ProcessLiveTailRequest(ctx, w, r)
-		return true
-	}
-
-	ok := processSelectRequest(ctxWithTimeout, w, r, path)
-	if !ok {
-		return false
-	}
-
-	err := ctxWithTimeout.Err()
-	switch err {
-	case nil:
-		// nothing to do
-	case context.Canceled:
-		remoteAddr := httpserver.GetQuotedRemoteAddr(r)
-		requestURI := httpserver.GetRequestURI(r)
-		logger.Infof("client has canceled the request after %.3f seconds: remoteAddr=%s, requestURI: %q",
-			time.Since(startTime).Seconds(), remoteAddr, requestURI)
-	case context.DeadlineExceeded:
-		err = &httpserver.ErrorWithStatusCode{
-			Err: fmt.Errorf("the request couldn't be executed in %.3f seconds; possible solutions: "+
-				"to increase -search.maxQueryDuration=%s; to pass bigger value to 'timeout' query arg", d.Seconds(), maxQueryDuration),
-			StatusCode: http.StatusServiceUnavailable,
-		}
-		httpserver.Errorf(w, r, "%s", err)
-	default:
-		httpserver.Errorf(w, r, "unexpected error: %s", err)
-	}
-
-	return true
-}
-
-func processSelectRequest(ctx context.Context, w http.ResponseWriter, r *http.Request, path string) bool {
-	httpserver.EnableCORS(w, r)
-	switch path {
-	case "/select/logsql/field_names":
-		logsqlFieldNamesRequests.Inc()
-		logsql.ProcessFieldNamesRequest(ctx, w, r)
-		return true
-	case "/select/logsql/field_values":
-		logsqlFieldValuesRequests.Inc()
-		logsql.ProcessFieldValuesRequest(ctx, w, r)
-		return true
-	case "/select/logsql/hits":
-		logsqlHitsRequests.Inc()
-		logsql.ProcessHitsRequest(ctx, w, r)
-		return true
-	case "/select/logsql/query":
+	switch {
+	case path == "/logsql/query":
 		logsqlQueryRequests.Inc()
-		logsql.ProcessQueryRequest(ctx, w, r)
-		return true
-	case "/select/logsql/stream_field_names":
-		logsqlStreamFieldNamesRequests.Inc()
-		logsql.ProcessStreamFieldNamesRequest(ctx, w, r)
-		return true
-	case "/select/logsql/stream_field_values":
-		logsqlStreamFieldValuesRequests.Inc()
-		logsql.ProcessStreamFieldValuesRequest(ctx, w, r)
-		return true
-	case "/select/logsql/stream_ids":
-		logsqlStreamIDsRequests.Inc()
-		logsql.ProcessStreamIDsRequest(ctx, w, r)
-		return true
-	case "/select/logsql/streams":
-		logsqlStreamsRequests.Inc()
-		logsql.ProcessStreamsRequest(ctx, w, r)
+		httpserver.EnableCORS(w, r)
+		logsql.ProcessQueryRequest(w, r, stopCh)
 		return true
 	default:
 		return false
@@ -228,13 +158,5 @@ func getMaxQueryDuration(r *http.Request) time.Duration {
 }
 
 var (
-	logsqlFieldNamesRequests        = metrics.NewCounter(`vl_http_requests_total{path="/select/logsql/field_names"}`)
-	logsqlFieldValuesRequests       = metrics.NewCounter(`vl_http_requests_total{path="/select/logsql/field_values"}`)
-	logsqlHitsRequests              = metrics.NewCounter(`vl_http_requests_total{path="/select/logsql/hits"}`)
-	logsqlQueryRequests             = metrics.NewCounter(`vl_http_requests_total{path="/select/logsql/query"}`)
-	logsqlStreamFieldNamesRequests  = metrics.NewCounter(`vl_http_requests_total{path="/select/logsql/stream_field_names"}`)
-	logsqlStreamFieldValuesRequests = metrics.NewCounter(`vl_http_requests_total{path="/select/logsql/stream_field_values"}`)
-	logsqlStreamIDsRequests         = metrics.NewCounter(`vl_http_requests_total{path="/select/logsql/stream_ids"}`)
-	logsqlStreamsRequests           = metrics.NewCounter(`vl_http_requests_total{path="/select/logsql/streams"}`)
-	logsqlTailRequests              = metrics.NewCounter(`vl_http_requests_total{path="/select/logsql/tail"}`)
+	logsqlQueryRequests = metrics.NewCounter(`vl_http_requests_total{path="/select/logsql/query"}`)
 )

app/vlselect/vmui/asset-manifest.json

@@ -1,13 +1,14 @@
 {
   "files": {
-    "main.css": "./static/css/main.1041c3d4.css",
-    "main.js": "./static/js/main.62a82f4a.js",
-    "static/js/685.bebe1265.chunk.js": "./static/js/685.bebe1265.chunk.js",
-    "static/media/MetricsQL.md": "./static/media/MetricsQL.aaabf95f2c9bf356bde4.md",
+    "main.css": "./static/css/main.5f91b1c5.css",
+    "main.js": "./static/js/main.7226aaff.js",
+    "static/js/522.b5ae4365.chunk.js": "./static/js/522.b5ae4365.chunk.js",
+    "static/media/Lato-Regular.ttf": "./static/media/Lato-Regular.d714fec1633b69a9c2e9.ttf",
+    "static/media/Lato-Bold.ttf": "./static/media/Lato-Bold.32360ba4b57802daa4d6.ttf",
     "index.html": "./index.html"
   },
   "entrypoints": [
-    "static/css/main.1041c3d4.css",
-    "static/js/main.62a82f4a.js"
+    "static/css/main.5f91b1c5.css",
+    "static/js/main.7226aaff.js"
   ]
 }

app/vlselect/vmui/index.html

@@ -1 +1 @@
-<!doctype html><html lang="en"><head><meta charset="utf-8"/><link rel="icon" href="./favicon.ico"/><meta name="viewport" content="width=device-width,initial-scale=1,maximum-scale=5"/><meta name="theme-color" content="#000000"/><meta name="description" content="UI for VictoriaMetrics"/><link rel="apple-touch-icon" href="./apple-touch-icon.png"/><link rel="icon" type="image/png" sizes="32x32" href="./favicon-32x32.png"><link rel="manifest" href="./manifest.json"/><title>VM UI</title><script src="./dashboards/index.js" type="module"></script><meta name="twitter:card" content="summary_large_image"><meta name="twitter:image" content="./preview.jpg"><meta name="twitter:title" content="UI for VictoriaMetrics"><meta name="twitter:description" content="Explore and troubleshoot your VictoriaMetrics data"><meta name="twitter:site" content="@VictoriaMetrics"><meta property="og:title" content="Metric explorer for VictoriaMetrics"><meta property="og:description" content="Explore and troubleshoot your VictoriaMetrics data"><meta property="og:image" content="./preview.jpg"><meta property="og:type" content="website"><script defer="defer" src="./static/js/main.62a82f4a.js"></script><link href="./static/css/main.1041c3d4.css" rel="stylesheet"></head><body><noscript>You need to enable JavaScript to run this app.</noscript><div id="root"></div></body></html>
+<!doctype html><html lang="en"><head><meta charset="utf-8"/><link rel="icon" href="./favicon.ico"/><meta name="viewport" content="width=device-width,initial-scale=1,maximum-scale=1,user-scalable=no"/><meta name="theme-color" content="#000000"/><meta name="description" content="UI for VictoriaMetrics"/><link rel="apple-touch-icon" href="./apple-touch-icon.png"/><link rel="icon" type="image/png" sizes="32x32" href="./favicon-32x32.png"><link rel="manifest" href="./manifest.json"/><title>VM UI</title><script src="./dashboards/index.js" type="module"></script><meta name="twitter:card" content="summary_large_image"><meta name="twitter:image" content="./preview.jpg"><meta name="twitter:title" content="UI for VictoriaMetrics"><meta name="twitter:description" content="Explore and troubleshoot your VictoriaMetrics data"><meta name="twitter:site" content="@VictoriaMetrics"><meta property="og:title" content="Metric explorer for VictoriaMetrics"><meta property="og:description" content="Explore and troubleshoot your VictoriaMetrics data"><meta property="og:image" content="./preview.jpg"><meta property="og:type" content="website"><script defer="defer" src="./static/js/main.7226aaff.js"></script><link href="./static/css/main.5f91b1c5.css" rel="stylesheet"></head><body><noscript>You need to enable JavaScript to run this app.</noscript><div id="root"></div></body></html>

app/vlselect/vmui/static/js/main.7226aaff.js.LICENSE.txt

@@ -4,8 +4,10 @@
 	http://jedwatson.github.io/classnames
 */
 
+/*! regenerator-runtime -- Copyright (c) 2014-present, Facebook, Inc. -- license (MIT): https://github.com/facebook/regenerator/blob/main/LICENSE */
+
 /**
- * @remix-run/router v1.15.1
+ * @remix-run/router v1.7.2
  *
  * Copyright (c) Remix Software Inc.
  *
@@ -16,7 +18,7 @@
  */
 
 /**
- * React Router DOM v6.22.1
+ * React Router DOM v6.14.2
  *
  * Copyright (c) Remix Software Inc.
  *
@@ -27,7 +29,7 @@
  */
 
 /**
- * React Router v6.22.1
+ * React Router v6.14.2
  *
  * Copyright (c) Remix Software Inc.
  *

app/vlstorage/main.go

@@ -1,42 +1,34 @@
 package vlstorage
 
 import (
-	"context"
 	"flag"
 	"fmt"
-	"io"
-	"net/http"
+	"sync"
 	"time"
 
-	"github.com/VictoriaMetrics/metrics"
-
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/flagutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/fs"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logstorage"
+	"github.com/VictoriaMetrics/metrics"
 )
 
 var (
 	retentionPeriod = flagutil.NewDuration("retentionPeriod", "7d", "Log entries with timestamps older than now-retentionPeriod are automatically deleted; "+
 		"log entries with timestamps outside the retention are also rejected during data ingestion; the minimum supported retention is 1d (one day); "+
-		"see https://docs.victoriametrics.com/victorialogs/#retention ; see also -retention.maxDiskSpaceUsageBytes")
-	maxDiskSpaceUsageBytes = flagutil.NewBytes("retention.maxDiskSpaceUsageBytes", 0, "The maximum disk space usage at -storageDataPath before older per-day "+
-		"partitions are automatically dropped; see https://docs.victoriametrics.com/victorialogs/#retention-by-disk-space-usage ; see also -retentionPeriod")
+		"see https://docs.victoriametrics.com/VictoriaLogs/#retention")
 	futureRetention = flagutil.NewDuration("futureRetention", "2d", "Log entries with timestamps bigger than now+futureRetention are rejected during data ingestion; "+
-		"see https://docs.victoriametrics.com/victorialogs/#retention")
-	storageDataPath = flag.String("storageDataPath", "victoria-logs-data", "Path to directory where to store VictoriaLogs data; "+
-		"see https://docs.victoriametrics.com/victorialogs/#storage")
+		"see https://docs.victoriametrics.com/VictoriaLogs/#retention")
+	storageDataPath = flag.String("storageDataPath", "victoria-logs-data", "Path to directory with the VictoriaLogs data; "+
+		"see https://docs.victoriametrics.com/VictoriaLogs/#storage")
 	inmemoryDataFlushInterval = flag.Duration("inmemoryDataFlushInterval", 5*time.Second, "The interval for guaranteed saving of in-memory data to disk. "+
 		"The saved data survives unclean shutdowns such as OOM crash, hardware reset, SIGKILL, etc. "+
 		"Bigger intervals may help increase the lifetime of flash storage with limited write cycles (e.g. Raspberry PI). "+
 		"Smaller intervals increase disk IO load. Minimum supported value is 1s")
 	logNewStreams = flag.Bool("logNewStreams", false, "Whether to log creation of new streams; this can be useful for debugging of high cardinality issues with log streams; "+
-		"see https://docs.victoriametrics.com/victorialogs/keyconcepts/#stream-fields ; see also -logIngestedRows")
+		"see https://docs.victoriametrics.com/VictoriaLogs/keyConcepts.html#stream-fields ; see also -logIngestedRows")
 	logIngestedRows = flag.Bool("logIngestedRows", false, "Whether to log all the ingested log entries; this can be useful for debugging of data ingestion; "+
-		"see https://docs.victoriametrics.com/victorialogs/data-ingestion/ ; see also -logNewStreams")
-	minFreeDiskSpaceBytes = flagutil.NewBytes("storage.minFreeDiskSpaceBytes", 10e6, "The minimum free disk space at -storageDataPath after which "+
-		"the storage stops accepting new data")
+		"see https://docs.victoriametrics.com/VictoriaLogs/data-ingestion/ ; see also -logNewStreams")
 )
 
 // Init initializes vlstorage.
@@ -47,17 +39,15 @@ func Init() {
 		logger.Panicf("BUG: Init() has been already called")
 	}
 
-	if retentionPeriod.Duration() < 24*time.Hour {
+	if retentionPeriod.Msecs < 24*3600*1000 {
 		logger.Fatalf("-retentionPeriod cannot be smaller than a day; got %s", retentionPeriod)
 	}
 	cfg := &logstorage.StorageConfig{
-		Retention:              retentionPeriod.Duration(),
-		MaxDiskSpaceUsageBytes: maxDiskSpaceUsageBytes.N,
-		FlushInterval:          *inmemoryDataFlushInterval,
-		FutureRetention:        futureRetention.Duration(),
-		LogNewStreams:          *logNewStreams,
-		LogIngestedRows:        *logIngestedRows,
-		MinFreeDiskSpaceBytes:  minFreeDiskSpaceBytes.N,
+		Retention:       time.Millisecond * time.Duration(retentionPeriod.Msecs),
+		FlushInterval:   *inmemoryDataFlushInterval,
+		FutureRetention: time.Millisecond * time.Duration(futureRetention.Msecs),
+		LogNewStreams:   *logNewStreams,
+		LogIngestedRows: *logIngestedRows,
 	}
 	logger.Infof("opening storage at -storageDataPath=%s", *storageDataPath)
 	startTime := time.Now()
@@ -65,16 +55,10 @@ func Init() {
 
 	var ss logstorage.StorageStats
 	strg.UpdateStats(&ss)
-	logger.Infof("successfully opened storage in %.3f seconds; smallParts: %d; bigParts: %d; smallPartBlocks: %d; bigPartBlocks: %d; smallPartRows: %d; bigPartRows: %d; "+
-		"smallPartSize: %d bytes; bigPartSize: %d bytes",
-		time.Since(startTime).Seconds(), ss.SmallParts, ss.BigParts, ss.SmallPartBlocks, ss.BigPartBlocks, ss.SmallPartRowsCount, ss.BigPartRowsCount,
-		ss.CompressedSmallPartSize, ss.CompressedBigPartSize)
+	logger.Infof("successfully opened storage in %.3f seconds; partsCount: %d; blocksCount: %d; rowsCount: %d; sizeBytes: %d",
+		time.Since(startTime).Seconds(), ss.FileParts, ss.FileBlocks, ss.FileRowsCount, ss.CompressedFileSize)
+	storageMetrics = initStorageMetrics(strg)
 
-	// register storage metrics
-	storageMetrics = metrics.NewSet()
-	storageMetrics.RegisterMetricsWriter(func(w io.Writer) {
-		writeStorageMetrics(w, strg)
-	})
 	metrics.RegisterSet(storageMetrics)
 }
 
@@ -90,118 +74,116 @@ func Stop() {
 var strg *logstorage.Storage
 var storageMetrics *metrics.Set
 
-// CanWriteData returns non-nil error if it cannot write data to vlstorage.
-func CanWriteData() error {
-	if strg.IsReadOnly() {
-		return &httpserver.ErrorWithStatusCode{
-			Err: fmt.Errorf("cannot add rows into storage in read-only mode; the storage can be in read-only mode "+
-				"because of lack of free disk space at -storageDataPath=%s", *storageDataPath),
-			StatusCode: http.StatusTooManyRequests,
-		}
-	}
-	return nil
-}
-
 // MustAddRows adds lr to vlstorage
-//
-// It is advised to call CanWriteData() before calling MustAddRows()
 func MustAddRows(lr *logstorage.LogRows) {
 	strg.MustAddRows(lr)
 }
 
-// RunQuery runs the given q and calls writeBlock for the returned data blocks
-func RunQuery(ctx context.Context, tenantIDs []logstorage.TenantID, q *logstorage.Query, writeBlock logstorage.WriteBlockFunc) error {
-	return strg.RunQuery(ctx, tenantIDs, q, writeBlock)
+// RunQuery runs the given q and calls processBlock for the returned data blocks
+func RunQuery(tenantIDs []logstorage.TenantID, q *logstorage.Query, stopCh <-chan struct{}, processBlock func(columns []logstorage.BlockColumn)) {
+	strg.RunQuery(tenantIDs, q, stopCh, processBlock)
 }
 
-// GetFieldNames executes q and returns field names seen in results.
-func GetFieldNames(ctx context.Context, tenantIDs []logstorage.TenantID, q *logstorage.Query) ([]logstorage.ValueWithHits, error) {
-	return strg.GetFieldNames(ctx, tenantIDs, q)
-}
+func initStorageMetrics(strg *logstorage.Storage) *metrics.Set {
+	ssCache := &logstorage.StorageStats{}
+	var ssCacheLock sync.Mutex
+	var lastUpdateTime time.Time
 
-// GetFieldValues executes q and returns unique values for the fieldName seen in results.
-//
-// If limit > 0, then up to limit unique values are returned.
-func GetFieldValues(ctx context.Context, tenantIDs []logstorage.TenantID, q *logstorage.Query, fieldName string, limit uint64) ([]logstorage.ValueWithHits, error) {
-	return strg.GetFieldValues(ctx, tenantIDs, q, fieldName, limit)
-}
-
-// GetStreamFieldNames executes q and returns stream field names seen in results.
-func GetStreamFieldNames(ctx context.Context, tenantIDs []logstorage.TenantID, q *logstorage.Query) ([]logstorage.ValueWithHits, error) {
-	return strg.GetStreamFieldNames(ctx, tenantIDs, q)
-}
-
-// GetStreamFieldValues executes q and returns stream field values for the given fieldName seen in results.
-//
-// If limit > 0, then up to limit unique stream field values are returned.
-func GetStreamFieldValues(ctx context.Context, tenantIDs []logstorage.TenantID, q *logstorage.Query, fieldName string, limit uint64) ([]logstorage.ValueWithHits, error) {
-	return strg.GetStreamFieldValues(ctx, tenantIDs, q, fieldName, limit)
-}
-
-// GetStreams executes q and returns streams seen in query results.
-//
-// If limit > 0, then up to limit unique streams are returned.
-func GetStreams(ctx context.Context, tenantIDs []logstorage.TenantID, q *logstorage.Query, limit uint64) ([]logstorage.ValueWithHits, error) {
-	return strg.GetStreams(ctx, tenantIDs, q, limit)
-}
-
-// GetStreamIDs executes q and returns streamIDs seen in query results.
-//
-// If limit > 0, then up to limit unique streamIDs are returned.
-func GetStreamIDs(ctx context.Context, tenantIDs []logstorage.TenantID, q *logstorage.Query, limit uint64) ([]logstorage.ValueWithHits, error) {
-	return strg.GetStreamIDs(ctx, tenantIDs, q, limit)
-}
-
-func writeStorageMetrics(w io.Writer, strg *logstorage.Storage) {
-	var ss logstorage.StorageStats
-	strg.UpdateStats(&ss)
-
-	metrics.WriteGaugeUint64(w, fmt.Sprintf(`vl_free_disk_space_bytes{path=%q}`, *storageDataPath), fs.MustGetFreeSpace(*storageDataPath))
-
-	isReadOnly := uint64(0)
-	if ss.IsReadOnly {
-		isReadOnly = 1
+	m := func() *logstorage.StorageStats {
+		ssCacheLock.Lock()
+		defer ssCacheLock.Unlock()
+		if time.Since(lastUpdateTime) < time.Second {
+			return ssCache
+		}
+		var ss logstorage.StorageStats
+		strg.UpdateStats(&ss)
+		ssCache = &ss
+		lastUpdateTime = time.Now()
+		return ssCache
 	}
-	metrics.WriteGaugeUint64(w, fmt.Sprintf(`vl_storage_is_read_only{path=%q}`, *storageDataPath), isReadOnly)
 
-	metrics.WriteGaugeUint64(w, `vl_active_merges{type="storage/inmemory"}`, ss.InmemoryActiveMerges)
-	metrics.WriteGaugeUint64(w, `vl_active_merges{type="storage/small"}`, ss.SmallPartActiveMerges)
-	metrics.WriteGaugeUint64(w, `vl_active_merges{type="storage/big"}`, ss.BigPartActiveMerges)
+	ms := metrics.NewSet()
 
-	metrics.WriteCounterUint64(w, `vl_merges_total{type="storage/inmemory"}`, ss.InmemoryMergesTotal)
-	metrics.WriteCounterUint64(w, `vl_merges_total{type="storage/small"}`, ss.SmallPartMergesTotal)
-	metrics.WriteCounterUint64(w, `vl_merges_total{type="storage/big"}`, ss.BigPartMergesTotal)
+	ms.NewGauge(fmt.Sprintf(`vl_free_disk_space_bytes{path=%q}`, *storageDataPath), func() float64 {
+		return float64(fs.MustGetFreeSpace(*storageDataPath))
+	})
 
-	metrics.WriteGaugeUint64(w, `vl_storage_rows{type="storage/inmemory"}`, ss.InmemoryRowsCount)
-	metrics.WriteGaugeUint64(w, `vl_storage_rows{type="storage/small"}`, ss.SmallPartRowsCount)
-	metrics.WriteGaugeUint64(w, `vl_storage_rows{type="storage/big"}`, ss.BigPartRowsCount)
+	ms.NewGauge(`vl_active_merges{type="inmemory"}`, func() float64 {
+		return float64(m().InmemoryActiveMerges)
+	})
+	ms.NewGauge(`vl_merges_total{type="inmemory"}`, func() float64 {
+		return float64(m().InmemoryMergesTotal)
+	})
+	ms.NewGauge(`vl_active_merges{type="file"}`, func() float64 {
+		return float64(m().FileActiveMerges)
+	})
+	ms.NewGauge(`vl_merges_total{type="file"}`, func() float64 {
+		return float64(m().FileMergesTotal)
+	})
 
-	metrics.WriteGaugeUint64(w, `vl_storage_parts{type="storage/inmemory"}`, ss.InmemoryParts)
-	metrics.WriteGaugeUint64(w, `vl_storage_parts{type="storage/small"}`, ss.SmallParts)
-	metrics.WriteGaugeUint64(w, `vl_storage_parts{type="storage/big"}`, ss.BigParts)
+	ms.NewGauge(`vl_storage_rows{type="inmemory"}`, func() float64 {
+		return float64(m().InmemoryRowsCount)
+	})
+	ms.NewGauge(`vl_storage_rows{type="file"}`, func() float64 {
+		return float64(m().FileRowsCount)
+	})
+	ms.NewGauge(`vl_storage_parts{type="inmemory"}`, func() float64 {
+		return float64(m().InmemoryParts)
+	})
+	ms.NewGauge(`vl_storage_parts{type="file"}`, func() float64 {
+		return float64(m().FileParts)
+	})
+	ms.NewGauge(`vl_storage_blocks{type="inmemory"}`, func() float64 {
+		return float64(m().InmemoryBlocks)
+	})
+	ms.NewGauge(`vl_storage_blocks{type="file"}`, func() float64 {
+		return float64(m().FileBlocks)
+	})
 
-	metrics.WriteGaugeUint64(w, `vl_storage_blocks{type="storage/inmemory"}`, ss.InmemoryBlocks)
-	metrics.WriteGaugeUint64(w, `vl_storage_blocks{type="storage/small"}`, ss.SmallPartBlocks)
-	metrics.WriteGaugeUint64(w, `vl_storage_blocks{type="storage/big"}`, ss.BigPartBlocks)
+	ms.NewGauge(`vl_partitions`, func() float64 {
+		return float64(m().PartitionsCount)
+	})
+	ms.NewGauge(`vl_streams_created_total`, func() float64 {
+		return float64(m().StreamsCreatedTotal)
+	})
 
-	metrics.WriteGaugeUint64(w, `vl_partitions`, ss.PartitionsCount)
-	metrics.WriteCounterUint64(w, `vl_streams_created_total`, ss.StreamsCreatedTotal)
+	ms.NewGauge(`vl_indexdb_rows`, func() float64 {
+		return float64(m().IndexdbItemsCount)
+	})
+	ms.NewGauge(`vl_indexdb_parts`, func() float64 {
+		return float64(m().IndexdbPartsCount)
+	})
+	ms.NewGauge(`vl_indexdb_blocks`, func() float64 {
+		return float64(m().IndexdbBlocksCount)
+	})
 
-	metrics.WriteGaugeUint64(w, `vl_indexdb_rows`, ss.IndexdbItemsCount)
-	metrics.WriteGaugeUint64(w, `vl_indexdb_parts`, ss.IndexdbPartsCount)
-	metrics.WriteGaugeUint64(w, `vl_indexdb_blocks`, ss.IndexdbBlocksCount)
+	ms.NewGauge(`vl_data_size_bytes{type="indexdb"}`, func() float64 {
+		return float64(m().IndexdbSizeBytes)
+	})
+	ms.NewGauge(`vl_data_size_bytes{type="storage"}`, func() float64 {
+		dm := m()
+		return float64(dm.CompressedInmemorySize + dm.CompressedFileSize)
+	})
 
-	metrics.WriteGaugeUint64(w, `vl_data_size_bytes{type="indexdb"}`, ss.IndexdbSizeBytes)
-	metrics.WriteGaugeUint64(w, `vl_data_size_bytes{type="storage"}`, ss.CompressedInmemorySize+ss.CompressedSmallPartSize+ss.CompressedBigPartSize)
+	ms.NewGauge(`vl_compressed_data_size_bytes{type="inmemory"}`, func() float64 {
+		return float64(m().CompressedInmemorySize)
+	})
+	ms.NewGauge(`vl_compressed_data_size_bytes{type="file"}`, func() float64 {
+		return float64(m().CompressedFileSize)
+	})
+	ms.NewGauge(`vl_uncompressed_data_size_bytes{type="inmemory"}`, func() float64 {
+		return float64(m().UncompressedInmemorySize)
+	})
+	ms.NewGauge(`vl_uncompressed_data_size_bytes{type="file"}`, func() float64 {
+		return float64(m().UncompressedFileSize)
+	})
 
-	metrics.WriteGaugeUint64(w, `vl_compressed_data_size_bytes{type="storage/inmemory"}`, ss.CompressedInmemorySize)
-	metrics.WriteGaugeUint64(w, `vl_compressed_data_size_bytes{type="storage/small"}`, ss.CompressedSmallPartSize)
-	metrics.WriteGaugeUint64(w, `vl_compressed_data_size_bytes{type="storage/big"}`, ss.CompressedBigPartSize)
+	ms.NewGauge(`vl_rows_dropped_total{reason="too_big_timestamp"}`, func() float64 {
+		return float64(m().RowsDroppedTooBigTimestamp)
+	})
+	ms.NewGauge(`vl_rows_dropped_total{reason="too_small_timestamp"}`, func() float64 {
+		return float64(m().RowsDroppedTooSmallTimestamp)
+	})
 
-	metrics.WriteGaugeUint64(w, `vl_uncompressed_data_size_bytes{type="storage/inmemory"}`, ss.UncompressedInmemorySize)
-	metrics.WriteGaugeUint64(w, `vl_uncompressed_data_size_bytes{type="storage/small"}`, ss.UncompressedSmallPartSize)
-	metrics.WriteGaugeUint64(w, `vl_uncompressed_data_size_bytes{type="storage/big"}`, ss.UncompressedBigPartSize)
-
-	metrics.WriteCounterUint64(w, `vl_rows_dropped_total{reason="too_big_timestamp"}`, ss.RowsDroppedTooBigTimestamp)
-	metrics.WriteCounterUint64(w, `vl_rows_dropped_total{reason="too_small_timestamp"}`, ss.RowsDroppedTooSmallTimestamp)
+	return ms
 }

app/vmagent/Makefile

@@ -88,9 +88,6 @@ vmagent-linux-ppc64le:
 vmagent-linux-s390x:
 	APP_NAME=vmagent CGO_ENABLED=0 GOOS=linux GOARCH=s390x $(MAKE) app-local-goos-goarch
 
-vmagent-linux-loong64:
-	APP_NAME=vmagent CGO_ENABLED=0 GOOS=linux GOARCH=loong64 $(MAKE) app-local-goos-goarch
-
 vmagent-linux-386:
 	APP_NAME=vmagent CGO_ENABLED=0 GOOS=linux GOARCH=386 $(MAKE) app-local-goos-goarch
 

app/vmagent/common/push_ctx.go

@@ -3,15 +3,13 @@ package common
 import (
 	"sync"
 
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/cgroup"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/prompbmarshal"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/promrelabel"
 )
 
 // PushCtx is a context used for populating WriteRequest.
 type PushCtx struct {
-	// WriteRequest contains the WriteRequest, which must be pushed later to remote storage.
-	//
-	// The actual labels and samples for the time series are stored in Labels and Samples fields.
 	WriteRequest prompbmarshal.WriteRequest
 
 	// Labels contains flat list of all the labels used in WriteRequest.
@@ -23,7 +21,13 @@ type PushCtx struct {
 
 // Reset resets ctx.
 func (ctx *PushCtx) Reset() {
-	ctx.WriteRequest.Reset()
+	tss := ctx.WriteRequest.Timeseries
+	for i := range tss {
+		ts := &tss[i]
+		ts.Labels = nil
+		ts.Samples = nil
+	}
+	ctx.WriteRequest.Timeseries = ctx.WriteRequest.Timeseries[:0]
 
 	promrelabel.CleanLabels(ctx.Labels)
 	ctx.Labels = ctx.Labels[:0]
@@ -35,10 +39,15 @@ func (ctx *PushCtx) Reset() {
 //
 // Call PutPushCtx when the ctx is no longer needed.
 func GetPushCtx() *PushCtx {
-	if v := pushCtxPool.Get(); v != nil {
-		return v.(*PushCtx)
+	select {
+	case ctx := <-pushCtxPoolCh:
+		return ctx
+	default:
+		if v := pushCtxPool.Get(); v != nil {
+			return v.(*PushCtx)
+		}
+		return &PushCtx{}
 	}
-	return &PushCtx{}
 }
 
 // PutPushCtx returns ctx to the pool.
@@ -46,7 +55,12 @@ func GetPushCtx() *PushCtx {
 // ctx mustn't be used after returning to the pool.
 func PutPushCtx(ctx *PushCtx) {
 	ctx.Reset()
-	pushCtxPool.Put(ctx)
+	select {
+	case pushCtxPoolCh <- ctx:
+	default:
+		pushCtxPool.Put(ctx)
+	}
 }
 
 var pushCtxPool sync.Pool
+var pushCtxPoolCh = make(chan *PushCtx, cgroup.AvailableCPUs())

app/vmagent/csvimport/request_handler.go

@@ -65,9 +65,7 @@ func insertRows(at *auth.Token, rows []parser.Row, extraLabels []prompbmarshal.L
 	ctx.WriteRequest.Timeseries = tssDst
 	ctx.Labels = labels
 	ctx.Samples = samples
-	if !remotewrite.TryPush(at, &ctx.WriteRequest) {
-		return remotewrite.ErrQueueFullHTTPRetry
-	}
+	remotewrite.Push(at, &ctx.WriteRequest)
 	rowsInserted.Add(len(rows))
 	if at != nil {
 		rowsTenantInserted.Get(at).Add(len(rows))

app/vmagent/datadog/request_handler.go

@@ -1,4 +1,4 @@
-package datadogv1
+package datadog
 
 import (
 	"net/http"
@@ -8,32 +8,33 @@ import (
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/auth"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/prompbmarshal"
 	parserCommon "github.com/VictoriaMetrics/VictoriaMetrics/lib/protoparser/common"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/protoparser/datadogutils"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/protoparser/datadogv1"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/protoparser/datadogv1/stream"
+	parser "github.com/VictoriaMetrics/VictoriaMetrics/lib/protoparser/datadog"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/protoparser/datadog/stream"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/tenantmetrics"
 	"github.com/VictoriaMetrics/metrics"
 )
 
 var (
-	rowsInserted       = metrics.NewCounter(`vmagent_rows_inserted_total{type="datadogv1"}`)
-	rowsTenantInserted = tenantmetrics.NewCounterMap(`vmagent_tenant_inserted_rows_total{type="datadogv1"}`)
-	rowsPerInsert      = metrics.NewHistogram(`vmagent_rows_per_insert{type="datadogv1"}`)
+	rowsInserted       = metrics.NewCounter(`vmagent_rows_inserted_total{type="datadog"}`)
+	rowsTenantInserted = tenantmetrics.NewCounterMap(`vmagent_tenant_inserted_rows_total{type="datadog"}`)
+	rowsPerInsert      = metrics.NewHistogram(`vmagent_rows_per_insert{type="datadog"}`)
 )
 
 // InsertHandlerForHTTP processes remote write for DataDog POST /api/v1/series request.
+//
+// See https://docs.datadoghq.com/api/latest/metrics/#submit-metrics
 func InsertHandlerForHTTP(at *auth.Token, req *http.Request) error {
 	extraLabels, err := parserCommon.GetExtraLabels(req)
 	if err != nil {
 		return err
 	}
 	ce := req.Header.Get("Content-Encoding")
-	return stream.Parse(req.Body, ce, func(series []datadogv1.Series) error {
+	return stream.Parse(req.Body, ce, func(series []parser.Series) error {
 		return insertRows(at, series, extraLabels)
 	})
 }
 
-func insertRows(at *auth.Token, series []datadogv1.Series, extraLabels []prompbmarshal.Label) error {
+func insertRows(at *auth.Token, series []parser.Series, extraLabels []prompbmarshal.Label) error {
 	ctx := common.GetPushCtx()
 	defer common.PutPushCtx(ctx)
 
@@ -62,7 +63,7 @@ func insertRows(at *auth.Token, series []datadogv1.Series, extraLabels []prompbm
 			})
 		}
 		for _, tag := range ss.Tags {
-			name, value := datadogutils.SplitTag(tag)
+			name, value := parser.SplitTag(tag)
 			if name == "host" {
 				name = "exported_host"
 			}
@@ -87,9 +88,7 @@ func insertRows(at *auth.Token, series []datadogv1.Series, extraLabels []prompbm
 	ctx.WriteRequest.Timeseries = tssDst
 	ctx.Labels = labels
 	ctx.Samples = samples
-	if !remotewrite.TryPush(at, &ctx.WriteRequest) {
-		return remotewrite.ErrQueueFullHTTPRetry
-	}
+	remotewrite.Push(at, &ctx.WriteRequest)
 	rowsInserted.Add(rowsTotal)
 	if at != nil {
 		rowsTenantInserted.Get(at).Add(rowsTotal)

app/vmagent/datadogsketches/request_handler.go

@@ -1,95 +0,0 @@
-package datadogsketches
-
-import (
-	"net/http"
-
-	"github.com/VictoriaMetrics/VictoriaMetrics/app/vmagent/common"
-	"github.com/VictoriaMetrics/VictoriaMetrics/app/vmagent/remotewrite"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/auth"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/prompbmarshal"
-	parserCommon "github.com/VictoriaMetrics/VictoriaMetrics/lib/protoparser/common"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/protoparser/datadogsketches"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/protoparser/datadogsketches/stream"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/protoparser/datadogutils"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/tenantmetrics"
-	"github.com/VictoriaMetrics/metrics"
-)
-
-var (
-	rowsInserted       = metrics.NewCounter(`vmagent_rows_inserted_total{type="datadogsketches"}`)
-	rowsTenantInserted = tenantmetrics.NewCounterMap(`vmagent_tenant_inserted_rows_total{type="datadogsketches"}`)
-	rowsPerInsert      = metrics.NewHistogram(`vmagent_rows_per_insert{type="datadogsketches"}`)
-)
-
-// InsertHandlerForHTTP processes remote write for DataDog POST /api/beta/sketches request.
-func InsertHandlerForHTTP(at *auth.Token, req *http.Request) error {
-	extraLabels, err := parserCommon.GetExtraLabels(req)
-	if err != nil {
-		return err
-	}
-	ce := req.Header.Get("Content-Encoding")
-	return stream.Parse(req.Body, ce, func(sketches []*datadogsketches.Sketch) error {
-		return insertRows(at, sketches, extraLabels)
-	})
-}
-
-func insertRows(at *auth.Token, sketches []*datadogsketches.Sketch, extraLabels []prompbmarshal.Label) error {
-	ctx := common.GetPushCtx()
-	defer common.PutPushCtx(ctx)
-
-	rowsTotal := 0
-	tssDst := ctx.WriteRequest.Timeseries[:0]
-	labels := ctx.Labels[:0]
-	samples := ctx.Samples[:0]
-	for _, sketch := range sketches {
-		ms := sketch.ToSummary()
-		for _, m := range ms {
-			labelsLen := len(labels)
-			labels = append(labels, prompbmarshal.Label{
-				Name:  "__name__",
-				Value: m.Name,
-			})
-			for _, label := range m.Labels {
-				labels = append(labels, prompbmarshal.Label{
-					Name:  label.Name,
-					Value: label.Value,
-				})
-			}
-			for _, tag := range sketch.Tags {
-				name, value := datadogutils.SplitTag(tag)
-				if name == "host" {
-					name = "exported_host"
-				}
-				labels = append(labels, prompbmarshal.Label{
-					Name:  name,
-					Value: value,
-				})
-			}
-			labels = append(labels, extraLabels...)
-			samplesLen := len(samples)
-			for _, p := range m.Points {
-				samples = append(samples, prompbmarshal.Sample{
-					Timestamp: p.Timestamp,
-					Value:     p.Value,
-				})
-			}
-			rowsTotal += len(m.Points)
-			tssDst = append(tssDst, prompbmarshal.TimeSeries{
-				Labels:  labels[labelsLen:],
-				Samples: samples[samplesLen:],
-			})
-		}
-	}
-	ctx.WriteRequest.Timeseries = tssDst
-	ctx.Labels = labels
-	ctx.Samples = samples
-	if !remotewrite.TryPush(at, &ctx.WriteRequest) {
-		return remotewrite.ErrQueueFullHTTPRetry
-	}
-	rowsInserted.Add(rowsTotal)
-	if at != nil {
-		rowsTenantInserted.Get(at).Add(rowsTotal)
-	}
-	rowsPerInsert.Update(float64(rowsTotal))
-	return nil
-}