lib/streamaggr: use stale samples for increase, total and rate outputs state update

Before, with ignore_old_samples or enable_windows set, old samples were just dropped.
With this change, these samples are used to update per-series state in stateful aggregation outputs: rate, total, and increase, but do not contribute to the aggregated output.
This ensures the next in-interval sample computes the correct per-interval increase relative to the most recent pre-interval value, rather than a stale one from a previous flush cycle.

.github/workflows/build.yml

@@ -65,9 +65,7 @@ jobs:
             arch: amd64
     steps:
       - name: Code checkout
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0  # v7.0.0
-        with:
-          persist-credentials: false
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd  # v6.0.2
 
       - name: Setup Go
         id: go

.github/workflows/changelog-linter.yml

@@ -13,11 +13,10 @@ jobs:
       contents: read
     runs-on: 'ubuntu-latest'
     steps:
-      - uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0  # v7.0.0
+      - uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd  # v6.0.2
         with:
           # needed for proper diff
           fetch-depth: 0
-          persist-credentials: false
 
       - name: 'Validate that changelog changes are under ## tip'
         run: |

.github/workflows/check-commit-signed.yml

@@ -12,10 +12,9 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout code
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0  # v7.0.0
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd  # v6.0.2
         with:
           fetch-depth: 0  # we need full history for commit verification
-          persist-credentials: false
 
       - name: Check commit signatures
         run: |

.github/workflows/check-licenses.yml

@@ -17,9 +17,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Code checkout
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0  # v7.0.0
-        with:
-          persist-credentials: false
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd  # v6.0.2
 
       - name: Setup Go
         id: go

.github/workflows/codeql-analysis-go.yml

@@ -31,9 +31,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0  # v7.0.0
-        with:
-          persist-credentials: false
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd  # v6.0.2
 
       - name: Set up Go
         id: go
@@ -54,14 +52,14 @@ jobs:
           restore-keys: go-artifacts-${{ runner.os }}-codeql-analyze-${{ steps.go.outputs.go-version }}-
 
       - name: Initialize CodeQL
-        uses: github/codeql-action/init@54f647b7e1bb85c95cddabcd46b0c578ec92bc1a  # v4.36.3
+        uses: github/codeql-action/init@e46ed2cbd01164d986452f91f178727624ae40d7  # v4.35.3
         with:
           languages: go
 
       - name: Autobuild
-        uses: github/codeql-action/autobuild@54f647b7e1bb85c95cddabcd46b0c578ec92bc1a  # v4.36.3
+        uses: github/codeql-action/autobuild@e46ed2cbd01164d986452f91f178727624ae40d7  # v4.35.3
 
       - name: Perform CodeQL Analysis
-        uses: github/codeql-action/analyze@54f647b7e1bb85c95cddabcd46b0c578ec92bc1a  # v4.36.3
+        uses: github/codeql-action/analyze@e46ed2cbd01164d986452f91f178727624ae40d7  # v4.35.3
         with:
           category: 'language:go'

.github/workflows/docs.yaml

@@ -18,18 +18,16 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Code checkout
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0  # v7.0.0
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd  # v6.0.2
         with:
           path: __vm
-          persist-credentials: false
 
       - name: Checkout private code
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0  # v7.0.0
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd  # v6.0.2
         with:
           repository: VictoriaMetrics/vmdocs
           token: ${{ secrets.VM_BOT_GH_TOKEN }}
           path: __vm-docs
-          persist-credentials: true
 
       - name: Import GPG key
         uses: crazy-max/ghaction-import-gpg@2dc316deee8e90f13e1a351ab510b4d5bc0c82cd  # v7.0.0

.github/workflows/test.yml

@@ -34,9 +34,7 @@ jobs:
     runs-on: 'vm-runner'
     steps:
       - name: Code checkout
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0  # v7.0.0
-        with:
-          persist-credentials: false
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd  # v6.0.2
 
       - name: Setup Go
         id: go
@@ -79,9 +77,7 @@ jobs:
 
     steps:
       - name: Code checkout
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0  # v7.0.0
-        with:
-          persist-credentials: false
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd  # v6.0.2
 
       - name: Setup Go
         id: go
@@ -106,9 +102,7 @@ jobs:
 
     steps:
       - name: Code checkout
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0  # v7.0.0
-        with:
-          persist-credentials: false
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd  # v6.0.2
 
       - name: Setup Go
         id: go

.github/workflows/vmui.yml

@@ -26,13 +26,13 @@ jobs:
   vmui-checks:
     name: VMUI Checks (lint, test, typecheck)
     permissions:
+      checks: write
       contents: read
+      pull-requests: read
     runs-on: ubuntu-latest
     steps:
       - name: Code checkout
-        uses: actions/checkout@9c091bb21b7c1c1d1991bb908d89e4e9dddfe3e0  # v7.0.0
-        with:
-          persist-credentials: false
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd  # v6.0.2
 
       - name: Cache node_modules
         id: cache
@@ -68,6 +68,12 @@ jobs:
         env:
           VMUI_SKIP_INSTALL: true
 
+      - name: Annotate Code Linting Results
+        uses: ataylorme/eslint-annotate-action@d57a1193d4c59cbfbf3f86c271f42612f9dbd9e9  # 3.0.0
+        with:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          report-json: app/vmui/packages/vmui/vmui-lint-report.json
+
       - name: Check overall status
         run: |
           echo "Lint status: ${{ steps.lint.outcome }}"

.golangci.yml

@@ -1,18 +1,9 @@
 version: "2"
 linters:
-  enable:
-    - errorlint
   settings:
     errcheck:
       exclude-functions:
         - (net/http.ResponseWriter).Write
-    errorlint:
-      errorf: true
-      # Do not enable `comparison` and `asserts`: they produce false positives,
-      # since many call sites intentionally compare sentinel errors directly (e.g. err == io.EOF)
-      # when the producer is documented to return them unwrapped. See https://github.com/VictoriaMetrics/VictoriaLogs/pull/1490
-      comparison: false
-      asserts: false
   exclusions:
     generated: lax
     presets:
@@ -23,4 +14,3 @@ linters:
         text: 'SA(4003|1019|5011):'
     paths:
       - ^app/vmui/
-      - app/vmui/packages/vmui/node_modules/

Makefile

@@ -447,7 +447,7 @@ vet:
 	go vet ./app/...
 	go vet ./apptest/...
 
-check-all: fmt vet golangci-lint
+check-all: fmt vet golangci-lint govulncheck
 
 clean-checkers: remove-golangci-lint remove-govulncheck
 
@@ -471,9 +471,8 @@ test-full-386:
 
 apptest:
 	$(MAKE) victoria-metrics-race vmagent-race vmalert-race vmauth-race vmctl-race vmbackup-race vmrestore-race
-	go test ./apptest/... -skip="^Test(Cluster|Mixed|Legacy).*"
+	go test ./apptest/... -skip="^Test(Cluster|Legacy).*"
 
-# App tests for legacy indexDB
 apptest-legacy: victoria-metrics-race vmbackup-race vmrestore-race
 	OS=$$(uname | tr '[:upper:]' '[:lower:]'); \
 	ARCH=$$(uname -m | tr '[:upper:]' '[:lower:]' | sed 's/x86_64/amd64/'); \
@@ -490,22 +489,6 @@ apptest-legacy: victoria-metrics-race vmbackup-race vmrestore-race
 	VMSTORAGE_V1_132_0_PATH=$${DIR}/vmstorage-prod \
 	go test ./apptest/tests -run="^TestLegacySingle.*"
 
-# App tests for mixed setups where vmsingle and vmcluster coexist.
-apptest-mixed: victoria-metrics-race
-	OS=$$(uname | tr '[:upper:]' '[:lower:]'); \
-	ARCH=$$(uname -m | tr '[:upper:]' '[:lower:]' | sed 's/x86_64/amd64/'); \
-	VERSION=v1.147.0; \
-	VMSINGLE=victoria-metrics-$${OS}-$${ARCH}-$${VERSION}.tar.gz; \
-	VMCLUSTER=victoria-metrics-$${OS}-$${ARCH}-$${VERSION}-cluster.tar.gz; \
-	URL=https://github.com/VictoriaMetrics/VictoriaMetrics/releases/download/$${VERSION}; \
-	DIR=/tmp/$${VERSION}; \
-	test -d $${DIR} || (mkdir $${DIR} && \
-		curl --output-dir /tmp -LO $${URL}/$${VMSINGLE} && tar xzf /tmp/$${VMSINGLE} -C $${DIR} && \
-		curl --output-dir /tmp -LO $${URL}/$${VMCLUSTER} && tar xzf /tmp/$${VMCLUSTER} -C $${DIR} \
-	); \
-	VMSELECT_PATH=$${DIR}/vmselect-prod \
-	go test ./apptest/tests -run="^TestMixed.*"
-
 benchmark:
 	go test -run=NO_TESTS -bench=. ./lib/...
 	go test -run=NO_TESTS -bench=. ./app/...

README.md

@@ -2,6 +2,7 @@
 
 [![Latest Release](https://img.shields.io/github/v/release/VictoriaMetrics/VictoriaMetrics?sort=semver&label=&filter=!*-victorialogs&logo=github&labelColor=gray&color=gray&link=https%3A%2F%2Fgithub.com%2FVictoriaMetrics%2FVictoriaMetrics%2Freleases%2Flatest)](https://github.com/VictoriaMetrics/VictoriaMetrics/releases)
 [![Docker Pulls](https://img.shields.io/docker/pulls/victoriametrics/victoria-metrics?label=&logo=docker&logoColor=white&labelColor=2496ED&color=2496ED&link=https%3A%2F%2Fhub.docker.com%2Fr%2Fvictoriametrics%2Fvictoria-metrics)](https://hub.docker.com/u/victoriametrics)
+[![Go Report](https://goreportcard.com/badge/github.com/VictoriaMetrics/VictoriaMetrics?link=https%3A%2F%2Fgoreportcard.com%2Freport%2Fgithub.com%2FVictoriaMetrics%2FVictoriaMetrics)](https://goreportcard.com/report/github.com/VictoriaMetrics/VictoriaMetrics)
 [![Build Status](https://github.com/VictoriaMetrics/VictoriaMetrics/actions/workflows/build.yml/badge.svg?branch=master&link=https%3A%2F%2Fgithub.com%2FVictoriaMetrics%2FVictoriaMetrics%2Factions)](https://github.com/VictoriaMetrics/VictoriaMetrics/actions/workflows/build.yml)
 [![License](https://img.shields.io/github/license/VictoriaMetrics/VictoriaMetrics?labelColor=green&label=&link=https%3A%2F%2Fgithub.com%2FVictoriaMetrics%2FVictoriaMetrics%2Fblob%2Fmaster%2FLICENSE)](https://github.com/VictoriaMetrics/VictoriaMetrics/blob/master/LICENSE)
 [![Join Slack](https://img.shields.io/badge/Join%20Slack-4A154B?logo=slack)](https://slack.victoriametrics.com)

app/victoria-metrics/main.go

@@ -89,7 +89,7 @@ func main() {
 	}
 	logger.Infof("starting VictoriaMetrics at %q...", listenAddrs)
 	startTime := time.Now()
-	vmstorage.Init(*vmselectMaxConcurrentRequests, *vmselectMaxQueueDuration, promql.ResetRollupResultCacheIfNeeded)
+	vmstorage.Init(*vmselectMaxConcurrentRequests, promql.ResetRollupResultCacheIfNeeded)
 	vmselect.Init(*vmselectMaxConcurrentRequests, *vmselectMaxQueueDuration)
 	vminsertcommon.StartIngestionRateLimiter(*maxIngestionRate)
 	vminsert.Init()

app/victoria-metrics/test/prom_writer.go

@@ -10,7 +10,7 @@ import (
 func Compress(wr WriteRequest) []byte {
 	data, err := wr.Marshal()
 	if err != nil {
-		panic(fmt.Errorf("BUG: cannot compress WriteRequest: %w", err))
+		panic(fmt.Errorf("BUG: cannot compress WriteRequest: %s", err))
 	}
 	return snappy.Encode(nil, data)
 }

app/vmagent/influx/request_handler.go

@@ -51,7 +51,7 @@ func InsertHandlerForHTTP(at *auth.Token, req *http.Request) error {
 	}
 	q := req.URL.Query()
 	precision := q.Get("precision")
-	// Read db tag from https://docs.influxdata.com/influxdb/v1/api/write/#operation/PostWrite
+	// Read db tag from https://docs.influxdata.com/influxdb/v1.7/tools/api/#write-http-endpoint
 	db := q.Get("db")
 	encoding := req.Header.Get("Content-Encoding")
 	isStreamMode := req.Header.Get("Stream-Mode") == "1"

app/vmagent/main.go

@@ -462,9 +462,7 @@ func requestHandler(w http.ResponseWriter, r *http.Request) bool {
 		return true
 	case "/prometheus/metric-relabel-debug", "/metric-relabel-debug":
 		promscrapeMetricRelabelDebugRequests.Inc()
-		rwGlobalRelabelConfigs := remotewrite.GetRemoteWriteRelabelConfigString()
-		rwURLRelabelConfigss := remotewrite.GetURLRelabelConfigString()
-		promscrape.WriteMetricRelabelDebug(w, r, rwGlobalRelabelConfigs, rwURLRelabelConfigss)
+		promscrape.WriteMetricRelabelDebug(w, r)
 		return true
 	case "/prometheus/target-relabel-debug", "/target-relabel-debug":
 		promscrapeTargetRelabelDebugRequests.Inc()

app/vmagent/opentelemetry/request_handler.go

@@ -63,7 +63,6 @@ func insertRows(at *auth.Token, tss []prompb.TimeSeries, mms []prompb.MetricMeta
 
 	rowsTotal := 0
 	tssDst := ctx.WriteRequest.Timeseries[:0]
-	mmsDst := ctx.WriteRequest.Metadata[:0]
 	labels := ctx.Labels[:0]
 	samples := ctx.Samples[:0]
 	for i := range tss {
@@ -83,19 +82,7 @@ func insertRows(at *auth.Token, tss []prompb.TimeSeries, mms []prompb.MetricMeta
 
 	var metadataTotal int
 	if prommetadata.IsEnabled() {
-		for i := range mms {
-			mm := &mms[i]
-			mmsDst = append(mmsDst, prompb.MetricMetadata{
-				MetricFamilyName: mm.MetricFamilyName,
-				Help:             mm.Help,
-				Type:             mm.Type,
-				Unit:             mm.Unit,
-
-				AccountID: mm.AccountID,
-				ProjectID: mm.ProjectID,
-			})
-		}
-		ctx.WriteRequest.Metadata = mmsDst
+		ctx.WriteRequest.Metadata = mms
 		metadataTotal = len(mms)
 	}
 

app/vmagent/promremotewrite/request_handler.go

@@ -35,9 +35,6 @@ func InsertHandler(at *auth.Token, req *http.Request) error {
 }
 
 func insertRows(at *auth.Token, timeseries []prompb.TimeSeries, mms []prompb.MetricMetadata, extraLabels []prompb.Label) error {
-	if len(extraLabels) == 0 && !prommetadata.IsEnabled() && at == nil {
-		return insertRowsFast(at, timeseries)
-	}
 	ctx := common.GetPushCtx()
 	defer common.PutPushCtx(ctx)
 
@@ -105,17 +102,3 @@ func insertRows(at *auth.Token, timeseries []prompb.TimeSeries, mms []prompb.Met
 	rowsPerInsert.Update(float64(rowsTotal))
 	return nil
 }
-
-func insertRowsFast(at *auth.Token, timeseries []prompb.TimeSeries) error {
-	rowsTotal := 0
-	for i := range timeseries {
-		rowsTotal += len(timeseries[i].Samples)
-	}
-	wr := &prompb.WriteRequest{Timeseries: timeseries}
-	if !remotewrite.TryPush(at, wr) {
-		return remotewrite.ErrQueueFullHTTPRetry
-	}
-	rowsInserted.Add(rowsTotal)
-	rowsPerInsert.Update(float64(rowsTotal))
-	return nil
-}

app/vmagent/remotewrite/client.go

@@ -151,23 +151,17 @@ func newHTTPClient(argIdx int, remoteWriteURL, sanitizedURL string, fq *persiste
 		}
 		tr.Proxy = http.ProxyURL(pu)
 	}
-
 	hc := &http.Client{
 		Transport: authCfg.NewRoundTripper(tr),
 		Timeout:   sendTimeout.GetOptionalArg(argIdx),
 	}
-	rwURL, err := url.Parse(remoteWriteURL)
-	if err != nil {
-		logger.Fatalf("BUG: cannot parse already parsed -remoteWrite.url=%q: %s", remoteWriteURL, err)
-	}
-	hc.Transport, rwURL = httputil.NewLoadBalancerTransport(hc.Transport, rwURL)
 	retryMaxIntervalFlag := retryMaxTime
 	if retryMaxInterval.String() != "" {
 		retryMaxIntervalFlag = retryMaxInterval
 	}
 	c := &client{
 		sanitizedURL:     sanitizedURL,
-		remoteWriteURL:   rwURL.String(),
+		remoteWriteURL:   remoteWriteURL,
 		authCfg:          authCfg,
 		awsCfg:           awsCfg,
 		fq:               fq,
@@ -193,7 +187,7 @@ func newHTTPClient(argIdx int, remoteWriteURL, sanitizedURL string, fq *persiste
 	return c
 }
 
-func (c *client) init(argIdx int, sanitizedURL string) {
+func (c *client) init(argIdx, concurrency int, sanitizedURL string) {
 	limitReached := metrics.GetOrCreateCounter(fmt.Sprintf(`vmagent_remotewrite_rate_limit_reached_total{url=%q}`, c.sanitizedURL))
 	if bytesPerSec := rateLimit.GetOptionalArg(argIdx); bytesPerSec > 0 {
 		logger.Infof("applying %d bytes per second rate limit for -remoteWrite.url=%q", bytesPerSec, sanitizedURL)
@@ -210,20 +204,11 @@ func (c *client) init(argIdx int, sanitizedURL string) {
 	c.packetsDropped = metrics.GetOrCreateCounter(fmt.Sprintf(`vmagent_remotewrite_packets_dropped_total{url=%q}`, c.sanitizedURL))
 	c.retriesCount = metrics.GetOrCreateCounter(fmt.Sprintf(`vmagent_remotewrite_retries_count_total{url=%q}`, c.sanitizedURL))
 	c.sendDuration = metrics.GetOrCreateFloatCounter(fmt.Sprintf(`vmagent_remotewrite_send_duration_seconds_total{url=%q}`, c.sanitizedURL))
-	workers := queues.GetOptionalArg(argIdx)
-	if workers <= 0 {
-		workers = 1
-	}
-	inmemoryWorkers := inmemoryQueues.GetOptionalArg(argIdx)
-	for range inmemoryWorkers {
-		c.wg.Go(func() {
-			c.runWorker(c.fq.MustReadInMemoryBlockBlocking)
-		})
-	}
-	for range workers {
-		c.wg.Go(func() {
-			c.runWorker(c.fq.MustReadBlock)
-		})
+	metrics.GetOrCreateGauge(fmt.Sprintf(`vmagent_remotewrite_queues{url=%q}`, c.sanitizedURL), func() float64 {
+		return float64(concurrency)
+	})
+	for range concurrency {
+		c.wg.Go(c.runWorker)
 	}
 	logger.Infof("initialized client for -remoteWrite.url=%q", c.sanitizedURL)
 }
@@ -317,12 +302,12 @@ func getAWSAPIConfig(argIdx int) (*awsapi.Config, error) {
 	return cfg, nil
 }
 
-func (c *client) runWorker(readBlock func(dst []byte) ([]byte, bool)) {
+func (c *client) runWorker() {
 	var ok bool
 	var block []byte
 	ch := make(chan bool, 1)
 	for {
-		block, ok = readBlock(block[:0])
+		block, ok = c.fq.MustReadBlock(block[:0])
 		if !ok {
 			return
 		}

app/vmagent/remotewrite/obfuscate.go

@@ -1,108 +0,0 @@
-package remotewrite
-
-import (
-	"crypto/sha256"
-	"encoding/hex"
-	"slices"
-	"strings"
-	"sync"
-
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/bytesutil"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/prompb"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/promrelabel"
-)
-
-type obfuscateLabelsCtx struct {
-	labels []prompb.Label
-
-	// buf holds allocations for cached results below
-	buf []byte
-
-	// cacheResults maps original label values to their SHA-256 hex digests,
-	// avoiding redundant hashing of repeated values within a single batch.
-	cacheResults map[string]string
-}
-
-func (olctx *obfuscateLabelsCtx) reset() {
-	promrelabel.CleanLabels(olctx.labels)
-	olctx.labels = olctx.labels[:0]
-	clear(olctx.cacheResults)
-	olctx.buf = olctx.buf[:0]
-}
-
-var obfuscateLabelsCtxPool = &sync.Pool{
-	New: func() any {
-		return &obfuscateLabelsCtx{
-			cacheResults: make(map[string]string),
-		}
-	},
-}
-
-func getObfuscateLabelsCtx() *obfuscateLabelsCtx {
-	return obfuscateLabelsCtxPool.Get().(*obfuscateLabelsCtx)
-}
-
-func putObfuscateLabelsCtx(ctx *obfuscateLabelsCtx) {
-	ctx.reset()
-	obfuscateLabelsCtxPool.Put(ctx)
-}
-
-func (olctx *obfuscateLabelsCtx) obfuscate(tss []prompb.TimeSeries, obfuscateLabels []string) []prompb.TimeSeries {
-	if len(obfuscateLabels) == 0 || len(tss) == 0 {
-		return tss
-	}
-	labels := olctx.labels
-	for i := range tss {
-		ts := &tss[i]
-		labelsLen := len(labels)
-		labels = append(labels, ts.Labels...)
-		found := false
-		for _, labelName := range obfuscateLabels {
-			tmp := promrelabel.GetLabelByName(labels[labelsLen:], labelName)
-			if tmp == nil {
-				continue
-			}
-			found = true
-			if obfuscatedValue, ok := olctx.cacheResults[tmp.Value]; ok {
-				// fast path: the obfuscated result was calculated before
-				tmp.Value = obfuscatedValue
-				continue
-			}
-
-			digest := sha256.Sum256(bytesutil.ToUnsafeBytes(tmp.Value))
-			buf := olctx.buf
-			bufLen := len(buf)
-			buf = hex.AppendEncode(buf, digest[:])
-			obfuscatedValue := bytesutil.ToUnsafeString(buf[bufLen:])
-
-			olctx.buf = buf
-			olctx.cacheResults[tmp.Value] = obfuscatedValue
-			tmp.Value = obfuscatedValue
-		}
-		if found {
-			ts.Labels = labels[labelsLen:]
-		} else {
-			labels = labels[:labelsLen]
-		}
-	}
-	olctx.labels = labels
-	return tss
-}
-
-func (rwctx *remoteWriteCtx) initObfuscateLabels() {
-	if len(*obfuscateLabels) == 0 {
-		return
-	}
-	idx := rwctx.idx
-	rwObfuscateLabels := obfuscateLabels.GetOptionalArg(idx)
-	rwObfuscateLabelsList := strings.Split(rwObfuscateLabels, "^^")
-
-	for _, label := range rwObfuscateLabelsList {
-		if label == "" {
-			continue
-		}
-		if !slices.Contains(rwctx.obfuscateLabels, label) {
-			rwctx.obfuscateLabels = append(rwctx.obfuscateLabels, label)
-		}
-	}
-}

app/vmagent/remotewrite/obfuscate_test.go

@@ -1,186 +0,0 @@
-package remotewrite
-
-import (
-	"crypto/sha256"
-	"encoding/hex"
-	"reflect"
-	"testing"
-
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/prompb"
-
-	"github.com/VictoriaMetrics/metrics"
-)
-
-func TestRemoteWriteObfuscateLabels(t *testing.T) {
-	f := func(obfuscateLabelList string, inputTss []prompb.TimeSeries, expectedTss []prompb.TimeSeries) {
-		t.Helper()
-		rwctx := &remoteWriteCtx{
-			idx: 0,
-		}
-		olctx := &obfuscateLabelsCtx{
-			cacheResults: make(map[string]string),
-		}
-		defer metrics.UnregisterAllMetrics()
-		originValue := *obfuscateLabels
-		defer func() {
-			*obfuscateLabels = originValue
-		}()
-		*obfuscateLabels = []string{obfuscateLabelList}
-		rwctx.initObfuscateLabels()
-
-		outputTss := olctx.obfuscate(inputTss, rwctx.obfuscateLabels)
-
-		if !reflect.DeepEqual(expectedTss, outputTss) {
-			t.Fatalf("unexpected samples;\ngot\n%v\nwant\n%v", outputTss, expectedTss)
-		}
-	}
-
-	sha256Result := func(str string) string {
-		sha256Result := sha256.Sum256([]byte(str))
-		return hex.EncodeToString(sha256Result[:])
-	}
-
-	// 1. obfuscation is not set.
-	f("",
-		[]prompb.TimeSeries{
-			{
-				Labels: []prompb.Label{
-					{Name: "ip", Value: "123"},
-					{Name: "instance", Value: "1234"},
-				},
-				Samples: []prompb.Sample{
-					{Value: 1, Timestamp: 0},
-				},
-			},
-		},
-		[]prompb.TimeSeries{
-			{
-				Labels: []prompb.Label{
-					{Name: "ip", Value: "123"},
-					{Name: "instance", Value: "1234"},
-				},
-				Samples: []prompb.Sample{
-					{Value: 1, Timestamp: 0},
-				},
-			},
-		},
-	)
-
-	// 1. obfuscation is set for another rwctx.
-	f(",ip",
-		[]prompb.TimeSeries{
-			{
-				Labels: []prompb.Label{
-					{Name: "ip", Value: "123"},
-					{Name: "instance", Value: "1234"},
-				},
-				Samples: []prompb.Sample{
-					{Value: 1, Timestamp: 0},
-				},
-			},
-		},
-		[]prompb.TimeSeries{
-			{
-				Labels: []prompb.Label{
-					{Name: "ip", Value: "123"},
-					{Name: "instance", Value: "1234"},
-				},
-				Samples: []prompb.Sample{
-					{Value: 1, Timestamp: 0},
-				},
-			},
-		},
-	)
-
-	// 2. obfuscate the value of "ip" label
-	f("ip",
-		[]prompb.TimeSeries{
-			{
-				Labels: []prompb.Label{
-					{Name: "ip", Value: "123"},
-					{Name: "instance", Value: "1234"},
-				},
-				Samples: []prompb.Sample{
-					{Value: 1, Timestamp: 0},
-				},
-			},
-		},
-		[]prompb.TimeSeries{
-			{
-				Labels: []prompb.Label{
-					{Name: "ip", Value: sha256Result("123")},
-					{Name: "instance", Value: "1234"},
-				},
-				Samples: []prompb.Sample{
-					{Value: 1, Timestamp: 0},
-				},
-			},
-		},
-	)
-
-	// 3. obfuscate the values of "ip" and "instance"
-	f("ip^^instance",
-		[]prompb.TimeSeries{
-			{
-				Labels: []prompb.Label{
-					{Name: "ip", Value: "123"},
-					{Name: "instance", Value: "1234"},
-				},
-				Samples: []prompb.Sample{
-					{Value: 1, Timestamp: 0},
-				},
-			},
-			{
-				Labels: []prompb.Label{
-					{Name: "job", Value: "123"},
-				},
-				Samples: []prompb.Sample{
-					{Value: 1, Timestamp: 0},
-				},
-			},
-		},
-		[]prompb.TimeSeries{
-			{
-				Labels: []prompb.Label{
-					{Name: "ip", Value: sha256Result("123")},
-					{Name: "instance", Value: sha256Result("1234")},
-				},
-				Samples: []prompb.Sample{
-					{Value: 1, Timestamp: 0},
-				},
-			},
-			{
-				Labels: []prompb.Label{
-					{Name: "job", Value: "123"},
-				},
-				Samples: []prompb.Sample{
-					{Value: 1, Timestamp: 0},
-				},
-			},
-		},
-	)
-
-	// 4. duplicate label names in config must produce single SHA-256, not double
-	f("ip^^ip",
-		[]prompb.TimeSeries{
-			{
-				Labels: []prompb.Label{
-					{Name: "ip", Value: "123"},
-				},
-				Samples: []prompb.Sample{
-					{Value: 1, Timestamp: 0},
-				},
-			},
-		},
-		[]prompb.TimeSeries{
-			{
-				Labels: []prompb.Label{
-					{Name: "ip", Value: sha256Result("123")},
-				},
-				Samples: []prompb.Sample{
-					{Value: 1, Timestamp: 0},
-				},
-			},
-		},
-	)
-}

app/vmagent/remotewrite/obfuscate_timing_test.go

@@ -1,94 +0,0 @@
-package remotewrite
-
-import (
-	"crypto/sha256"
-	"encoding/hex"
-	"reflect"
-	"testing"
-
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/prompb"
-
-	"github.com/VictoriaMetrics/metrics"
-)
-
-func BenchmarkRemoteWriteObfuscateLabels(b *testing.B) {
-	originValue := *obfuscateLabels
-	defer func() {
-		*obfuscateLabels = originValue
-	}()
-	*obfuscateLabels = []string{"ip^^instance"}
-	sha256Result := func(str string) string {
-		sha256Result := sha256.Sum256([]byte(str))
-		return hex.EncodeToString(sha256Result[:])
-	}
-	expected := []prompb.TimeSeries{
-		{
-			Labels: []prompb.Label{
-				{Name: "ip", Value: sha256Result("123")},
-				{Name: "instance", Value: sha256Result("12345")},
-				{Name: "__name__", Value: "http_requests_total"},
-			},
-			Samples: []prompb.Sample{
-				{Value: 1, Timestamp: 0},
-			},
-		},
-		{
-			Labels: []prompb.Label{
-				{Name: "ip", Value: sha256Result("1236")},
-				{Name: "instance", Value: sha256Result("some-long-instante-string")},
-				{Name: "__name__", Value: "concurrent_requests"},
-			},
-			Samples: []prompb.Sample{
-				{Value: 1, Timestamp: 0},
-			},
-		},
-	}
-	defer metrics.UnregisterAllMetrics()
-
-	inputTss := []prompb.TimeSeries{
-		{
-			Labels: []prompb.Label{
-				{Name: "ip", Value: "123"},
-				{Name: "instance", Value: "12345"},
-				{Name: "__name__", Value: "http_requests_total"},
-			},
-			Samples: []prompb.Sample{
-				{Value: 1, Timestamp: 0},
-			},
-		},
-		{
-			Labels: []prompb.Label{
-				{Name: "ip", Value: "1236"},
-				{Name: "instance", Value: "some-long-instante-string"},
-				{Name: "__name__", Value: "concurrent_requests"},
-			},
-			Samples: []prompb.Sample{
-				{Value: 1, Timestamp: 0},
-			},
-		},
-	}
-	b.ResetTimer()
-	b.ReportAllocs()
-
-	b.RunParallel(func(pb *testing.PB) {
-		rwctx := &remoteWriteCtx{
-			idx: 0,
-		}
-		olctx := &obfuscateLabelsCtx{
-			cacheResults: make(map[string]string),
-		}
-		rwctx.initObfuscateLabels()
-		var localTss []prompb.TimeSeries
-		for pb.Next() {
-			// always make a shallow copy because obfuscate changes input
-			localTss = localTss[:0]
-			localTss = append(localTss, inputTss...)
-			olctx.reset()
-			outputTss := olctx.obfuscate(localTss, rwctx.obfuscateLabels)
-			if !reflect.DeepEqual(expected, outputTss) {
-				b.Fatalf("unexpected output: got: \n%v\n want: \n%v\n", outputTss, expected)
-			}
-		}
-	})
-
-}

app/vmagent/remotewrite/pendingseries.go

@@ -209,12 +209,13 @@ func (wr *writeRequest) tryPushMetadata(mms []prompb.MetricMetadata) bool {
 func (wr *writeRequest) copyMetadata(dst, src *prompb.MetricMetadata) {
 	// Direct copy for non-string fields, which are safe by value.
 	dst.Type = src.Type
+	dst.Unit = src.Unit
 
 	dst.AccountID = src.AccountID
 	dst.ProjectID = src.ProjectID
 
 	// Pre-allocate memory for all string fields.
-	neededBufLen := len(src.MetricFamilyName) + len(src.Help) + len(src.Unit)
+	neededBufLen := len(src.MetricFamilyName) + len(src.Help)
 	bufLen := len(wr.metadatabuf)
 	wr.metadatabuf = slicesutil.SetLength(wr.metadatabuf, bufLen+neededBufLen)
 	buf := wr.metadatabuf[:bufLen]
@@ -229,11 +230,6 @@ func (wr *writeRequest) copyMetadata(dst, src *prompb.MetricMetadata) {
 	buf = append(buf, src.Help...)
 	dst.Help = bytesutil.ToUnsafeString(buf[bufLen:])
 
-	// Copy Unit
-	bufLen = len(buf)
-	buf = append(buf, src.Unit...)
-	dst.Unit = bytesutil.ToUnsafeString(buf[bufLen:])
-
 	wr.metadatabuf = buf
 }
 

app/vmagent/remotewrite/relabel.go

@@ -12,7 +12,6 @@ import (
 	"github.com/VictoriaMetrics/metrics"
 	"gopkg.in/yaml.v2"
 
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/bytesutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/fasttime"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/flagutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
@@ -83,16 +82,6 @@ func WriteRelabelConfigData(w io.Writer) {
 	_, _ = w.Write(*p)
 }
 
-// GetRemoteWriteRelabelConfigString returns -remoteWrite.relabelConfig contents in string
-func GetRemoteWriteRelabelConfigString() string {
-	var bb bytesutil.ByteBuffer
-	WriteRelabelConfigData(&bb)
-	if bb.Len() == 0 {
-		return ""
-	}
-	return string(bb.B)
-}
-
 // WriteURLRelabelConfigData writes -remoteWrite.urlRelabelConfig contents to w
 func WriteURLRelabelConfigData(w io.Writer) {
 	p := remoteWriteURLRelabelConfigData.Load()
@@ -119,24 +108,6 @@ func WriteURLRelabelConfigData(w io.Writer) {
 	_, _ = w.Write(d)
 }
 
-// GetURLRelabelConfigString returns -remoteWrite.urlRelabelConfig contents in []string
-func GetURLRelabelConfigString() []string {
-	p := remoteWriteURLRelabelConfigData.Load()
-	if p == nil {
-		return nil
-	}
-	var ss []string
-	for i := range *remoteWriteURLs {
-		cfgData := (*p)[i]
-		var cfgDataBytes []byte
-		if cfgData != nil {
-			cfgDataBytes, _ = yaml.Marshal(cfgData)
-		}
-		ss = append(ss, string(cfgDataBytes))
-	}
-	return ss
-}
-
 func reloadRelabelConfigs() {
 	rcs := allRelabelConfigs.Load()
 	if !rcs.isSet() {

app/vmagent/remotewrite/remotewrite.go

@@ -12,18 +12,19 @@ import (
 	"sync/atomic"
 	"time"
 
-	"github.com/VictoriaMetrics/metrics"
 	"github.com/cespare/xxhash/v2"
 
+	"github.com/VictoriaMetrics/metrics"
+
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/auth"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/bloomfilter"
+	"github.com/VictoriaMetrics/VictoriaMetrics/lib/bytesutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/cgroup"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/consistenthash"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/flagutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/fs"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/mdx"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/memory"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/persistentqueue"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/procutil"
@@ -65,9 +66,6 @@ var (
 	queues = flagutil.NewArrayInt("remoteWrite.queues", cgroup.AvailableCPUs()*2, "The number of concurrent queues to each -remoteWrite.url. Set more queues if default number of queues "+
 		"isn't enough for sending high volume of collected data to remote storage. "+
 		"Default value depends on the number of available CPU cores. It should work fine in most cases since it minimizes resource usage")
-	inmemoryQueues = flagutil.NewArrayInt("remoteWrite.inmemoryQueues", 0, "The number of additional workers per each -remoteWrite.url, which send only recently ingested data from the in-memory queue, "+
-		"while the file-based queue at -remoteWrite.tmpDataPath is drained by workers configured via -remoteWrite.queues. "+
-		"This reduces delivery lag for fresh samples when the file-based queue contains a backlog accumulated during remote storage outages.")
 	showRemoteWriteURL = flag.Bool("remoteWrite.showURL", false, "Whether to show -remoteWrite.url in the exported metrics. "+
 		"It is hidden by default, since it can contain sensitive info such as auth key")
 	maxPendingBytesPerURL = flagutil.NewArrayBytes("remoteWrite.maxDiskUsagePerURL", 0, "The maximum file-based buffer size in bytes at -remoteWrite.tmpDataPath "+
@@ -105,14 +103,6 @@ var (
 		"cannot be pushed into the configured -remoteWrite.url systems in a timely manner. See https://docs.victoriametrics.com/victoriametrics/vmagent/#disabling-on-disk-persistence")
 	disableMetadataPerURL = flagutil.NewArrayBool("remoteWrite.disableMetadata", "Whether to disable sending metadata to the corresponding -remoteWrite.url. "+
 		"By default, metadata sending is controlled by the global -enableMetadata flag")
-
-	enableMdx = flagutil.NewArrayBool("remoteWrite.mdx.enable", "Whether to only retain metrics from VictoriaMetrics services before sending them to the corresponding -remoteWrite.url. "+
-		"Can be combined with -remoteWrite.obfuscateLabels to hide sensitive label values in the forwarded metrics. "+
-		"Please see https://docs.victoriametrics.com/victoriametrics/vmagent/#monitoring-data-exchange")
-	obfuscateLabels = flagutil.NewArrayString("remoteWrite.obfuscateLabels", "List of label names whose values will be obfuscated before being sent to the corresponding -remoteWrite.url. "+
-		"Multiple label names should be separated by `^^`, e.g. \"job^^instance,ip\". "+
-		"Can be combined with -remoteWrite.mdx.enable to hide sensitive label values in VictoriaMetrics self-monitoring metrics. "+
-		"Please see https://docs.victoriametrics.com/victoriametrics/vmagent/#obfuscating-label-values")
 )
 
 var (
@@ -169,8 +159,8 @@ func InitSecretFlags() {
 }
 
 var (
-	shardByURLLabelsFilter       []string
-	shardByURLIgnoreLabelsFilter []string
+	shardByURLLabelsMap       map[string]struct{}
+	shardByURLIgnoreLabelsMap map[string]struct{}
 )
 
 // Init initializes remotewrite.
@@ -217,8 +207,8 @@ func Init() {
 		logger.Fatalf("-remoteWrite.shardByURL.labels and -remoteWrite.shardByURL.ignoreLabels cannot be set simultaneously; " +
 			"see https://docs.victoriametrics.com/victoriametrics/vmagent/#sharding-among-remote-storages")
 	}
-	shardByURLLabelsFilter = slices.Clone(*shardByURLLabels)
-	shardByURLIgnoreLabelsFilter = slices.Clone(*shardByURLIgnoreLabels)
+	shardByURLLabelsMap = newMapFromStrings(*shardByURLLabels)
+	shardByURLIgnoreLabelsMap = newMapFromStrings(*shardByURLIgnoreLabels)
 
 	initLabelsGlobal()
 
@@ -314,10 +304,6 @@ func initRemoteWriteCtxs(urls []string) {
 	}
 	fs.RegisterPathFsMetrics(*tmpDataPath)
 
-	if slices.Contains(*enableMdx, true) && *shardByURL {
-		logger.Fatalf("-remoteWrite.mdx.enable and -remoteWrite.shardByURL cannot be set to true simultaneously.")
-	}
-
 	if *shardByURL {
 		consistentHashNodes := make([]string, 0, len(urls))
 		for i, url := range urls {
@@ -576,14 +562,6 @@ func tryPushMetadataToRemoteStorages(at *auth.Token, rwctxs []*remoteWriteCtx, m
 			mm.ProjectID = at.ProjectID
 		}
 	}
-	tmp := mms[:0]
-	for _, mm := range mms {
-		if timeserieslimits.IsMetricMetadataExceeding(&mm) {
-			continue
-		}
-		tmp = append(tmp, mm)
-	}
-	mms = tmp
 	// Do not shard metadata even if -remoteWrite.shardByURL is set, just replicate it among rwctxs.
 	// Since metadata is usually small and there is no guarantee that metadata can be sent to
 	// the same remote storage with the corresponding metrics.
@@ -717,18 +695,18 @@ func shardAmountRemoteWriteCtx(tssBlock []prompb.TimeSeries, shards [][]prompb.T
 
 	for _, ts := range tssBlock {
 		hashLabels := ts.Labels
-		if len(shardByURLLabelsFilter) > 0 {
+		if len(shardByURLLabelsMap) > 0 {
 			hashLabels = tmpLabels.Labels[:0]
 			for _, label := range ts.Labels {
-				if slices.Contains(shardByURLLabelsFilter, label.Name) {
+				if _, ok := shardByURLLabelsMap[label.Name]; ok {
 					hashLabels = append(hashLabels, label)
 				}
 			}
 			tmpLabels.Labels = hashLabels
-		} else if len(shardByURLIgnoreLabelsFilter) > 0 {
+		} else if len(shardByURLIgnoreLabelsMap) > 0 {
 			hashLabels = tmpLabels.Labels[:0]
 			for _, label := range ts.Labels {
-				if !slices.Contains(shardByURLIgnoreLabelsFilter, label.Name) {
+				if _, ok := shardByURLIgnoreLabelsMap[label.Name]; !ok {
 					hashLabels = append(hashLabels, label)
 				}
 			}
@@ -829,26 +807,34 @@ var (
 // it omits the '=' separator between label name and value for backward compatibility.
 // Changing it would re-shard all series across remoteWrite targets.
 func getLabelsHashForShard(labels []prompb.Label) uint64 {
-	var d xxhash.Digest
-	d.Reset()
+	bb := labelsHashBufPool.Get()
+	b := bb.B[:0]
 	for _, label := range labels {
-		_, _ = d.WriteString(label.Name)
-		_, _ = d.WriteString(label.Value)
+		b = append(b, label.Name...)
+		b = append(b, label.Value...)
 	}
-	return d.Sum64()
+	h := xxhash.Sum64(b)
+	bb.B = b
+	labelsHashBufPool.Put(bb)
+	return h
 }
 
 func getLabelsHash(labels []prompb.Label) uint64 {
-	var d xxhash.Digest
-	d.Reset()
+	bb := labelsHashBufPool.Get()
+	b := bb.B[:0]
 	for _, label := range labels {
-		_, _ = d.WriteString(label.Name)
-		_, _ = d.WriteString("=")
-		_, _ = d.WriteString(label.Value)
+		b = append(b, label.Name...)
+		b = append(b, '=')
+		b = append(b, label.Value...)
 	}
-	return d.Sum64()
+	h := xxhash.Sum64(b)
+	bb.B = b
+	labelsHashBufPool.Put(bb)
+	return h
 }
 
+var labelsHashBufPool bytesutil.ByteBufferPool
+
 func logSkippedSeries(labels []prompb.Label, flagName string, flagValue int) {
 	select {
 	case <-logSkippedSeriesTicker.C:
@@ -873,7 +859,6 @@ type remoteWriteCtx struct {
 
 	sas          atomic.Pointer[streamaggr.Aggregators]
 	deduplicator *streamaggr.Deduplicator
-	mdxFilter    *mdx.Filter
 
 	streamAggrKeepInput bool
 	streamAggrDropInput bool
@@ -886,11 +871,8 @@ type remoteWriteCtx struct {
 	pss        []*pendingSeries
 	pssNextIdx atomic.Uint64
 
-	obfuscateLabels []string
-
 	rowsPushedAfterRelabel *metrics.Counter
 	rowsDroppedByRelabel   *metrics.Counter
-	mdxRowsPreserved       *metrics.Counter
 
 	pushFailures                 *metrics.Counter
 	metadataDroppedOnPushFailure *metrics.Counter
@@ -924,8 +906,7 @@ func newRemoteWriteCtx(argIdx int, remoteWriteURL *url.URL, sanitizedURL string)
 	}
 
 	isPQDisabled := disableOnDiskQueue.GetOptionalArg(argIdx)
-	inmemoryQueueSize := inmemoryQueues.GetOptionalArg(argIdx)
-	queuesSize := queues.GetOptionalArg(argIdx) + inmemoryQueueSize
+	queuesSize := queues.GetOptionalArg(argIdx)
 	if queuesSize > maxQueues {
 		queuesSize = maxQueues
 	} else if queuesSize <= 0 {
@@ -942,13 +923,7 @@ func newRemoteWriteCtx(argIdx int, remoteWriteURL *url.URL, sanitizedURL string)
 	if maxInmemoryBlocks < 2 {
 		maxInmemoryBlocks = 2
 	}
-	fqOpts := persistentqueue.OpenFastQueueOpts{
-		MaxInmemoryBlocks:      maxInmemoryBlocks,
-		MaxPendingBytes:        maxPendingBytes,
-		IsPQDisabled:           isPQDisabled,
-		PrioritizeInmemoryData: inmemoryQueueSize > 0,
-	}
-	fq := persistentqueue.MustOpenFastQueueWithOpts(queuePath, sanitizedURL, fqOpts)
+	fq := persistentqueue.MustOpenFastQueue(queuePath, sanitizedURL, maxInmemoryBlocks, maxPendingBytes, isPQDisabled)
 	_ = metrics.GetOrCreateGauge(fmt.Sprintf(`vmagent_remotewrite_pending_data_bytes{path=%q, url=%q}`, queuePath, sanitizedURL), func() float64 {
 		return float64(fq.GetPendingBytes())
 	})
@@ -961,9 +936,6 @@ func newRemoteWriteCtx(argIdx int, remoteWriteURL *url.URL, sanitizedURL string)
 		}
 		return 0
 	})
-	metrics.GetOrCreateGauge(fmt.Sprintf(`vmagent_remotewrite_queues{url=%q}`, sanitizedURL), func() float64 {
-		return float64(queuesSize)
-	})
 
 	var c *client
 	switch remoteWriteURL.Scheme {
@@ -972,7 +944,7 @@ func newRemoteWriteCtx(argIdx int, remoteWriteURL *url.URL, sanitizedURL string)
 	default:
 		logger.Fatalf("unsupported scheme: %s for remoteWriteURL: %s, want `http`, `https`", remoteWriteURL.Scheme, sanitizedURL)
 	}
-	c.init(argIdx, sanitizedURL)
+	c.init(argIdx, queuesSize, sanitizedURL)
 
 	// Initialize pss
 	sf := significantFigures.GetOptionalArg(argIdx)
@@ -987,6 +959,7 @@ func newRemoteWriteCtx(argIdx int, remoteWriteURL *url.URL, sanitizedURL string)
 	for i := range pss {
 		pss[i] = newPendingSeries(fq, &c.useVMProto, sf, rd)
 	}
+
 	rwctx := &remoteWriteCtx{
 		idx:            argIdx,
 		fq:             fq,
@@ -1002,17 +975,6 @@ func newRemoteWriteCtx(argIdx int, remoteWriteURL *url.URL, sanitizedURL string)
 		rowsDroppedOnPushFailure:     metrics.GetOrCreateCounter(fmt.Sprintf(`vmagent_remotewrite_samples_dropped_total{path=%q,url=%q}`, queuePath, sanitizedURL)),
 	}
 	rwctx.initStreamAggrConfig()
-	rwctx.initObfuscateLabels()
-
-	if enableMdx.GetOptionalArg(argIdx) {
-		mdxFilter := mdx.NewFilter()
-		rwctx.mdxFilter = mdxFilter
-		rwctx.mdxRowsPreserved = metrics.GetOrCreateCounter(fmt.Sprintf(`vmagent_remotewrite_mdx_rows_preserved_total{path=%q,url=%q}`, queuePath, sanitizedURL))
-		_ = metrics.NewGauge(fmt.Sprintf(`vmagent_remotewrite_mdx_tracked_instances{path=%q,url=%q}`, queuePath, sanitizedURL), func() float64 {
-			return float64(mdxFilter.VMInstancesCount())
-		})
-
-	}
 
 	return rwctx
 }
@@ -1027,11 +989,6 @@ func (rwctx *remoteWriteCtx) MustStop() {
 		rwctx.deduplicator.MustStop()
 		rwctx.deduplicator = nil
 	}
-	if rwctx.mdxFilter != nil {
-		rwctx.mdxFilter.MustStop()
-		rwctx.mdxFilter = nil
-		rwctx.mdxRowsPreserved = nil
-	}
 
 	for _, ps := range rwctx.pss {
 		ps.MustStop()
@@ -1047,7 +1004,6 @@ func (rwctx *remoteWriteCtx) MustStop() {
 
 	rwctx.rowsPushedAfterRelabel = nil
 	rwctx.rowsDroppedByRelabel = nil
-
 }
 
 // TryPushTimeSeries sends tss series to the configured remote write endpoint
@@ -1055,41 +1011,16 @@ func (rwctx *remoteWriteCtx) MustStop() {
 // TryPushTimeSeries doesn't modify tss, so tss can be passed concurrently to TryPush across distinct rwctx instances.
 func (rwctx *remoteWriteCtx) TryPushTimeSeries(tss []prompb.TimeSeries, forceDropSamplesOnFailure bool) bool {
 	var rctx *relabelCtx
-	var mctx *mdx.Ctx
 	var v *[]prompb.TimeSeries
 	defer func() {
-		if v != nil {
-			*v = prompb.ResetTimeSeries(tss)
-			tssPool.Put(v)
-		}
-		if rctx != nil {
-			putRelabelCtx(rctx)
-		}
-		if mctx != nil {
-			mdx.PutContext(mctx)
+		if rctx == nil {
+			return
 		}
+		*v = prompb.ResetTimeSeries(tss)
+		tssPool.Put(v)
+		putRelabelCtx(rctx)
 	}()
 
-	copyTimeSeriesIfNeeded := func() {
-		if v == nil {
-			v = tssPool.Get().(*[]prompb.TimeSeries)
-			tss = append(*v, tss...)
-		}
-	}
-
-	if rwctx.mdxFilter != nil {
-		mctx = mdx.GetContext()
-		// Make a copy of tss before applying relabeling in order to prevent
-		// from affecting time series for other remoteWrite.mdx configs.
-		copyTimeSeriesIfNeeded()
-		tss = rwctx.mdxFilter.Filter(mctx, tss)
-		if len(tss) == 0 {
-			return true
-		}
-		rowsCount := getRowsCount(tss)
-		rwctx.mdxRowsPreserved.Add(rowsCount)
-	}
-
 	// Apply relabeling
 	rcs := allRelabelConfigs.Load()
 	pcs := rcs.perURL[rwctx.idx]
@@ -1099,7 +1030,8 @@ func (rwctx *remoteWriteCtx) TryPushTimeSeries(tss []prompb.TimeSeries, forceDro
 		// from affecting time series for other remoteWrite.url configs.
 		// See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/467
 		// and https://github.com/VictoriaMetrics/VictoriaMetrics/issues/599
-		copyTimeSeriesIfNeeded()
+		v = tssPool.Get().(*[]prompb.TimeSeries)
+		tss = append(*v, tss...)
 		rowsCountBeforeRelabel := getRowsCount(tss)
 		tss = rctx.applyRelabeling(tss, pcs)
 		rowsCountAfterRelabel := getRowsCount(tss)
@@ -1117,7 +1049,8 @@ func (rwctx *remoteWriteCtx) TryPushTimeSeries(tss []prompb.TimeSeries, forceDro
 			if rctx == nil {
 				rctx = getRelabelCtx()
 				// Make a copy of tss before dropping aggregated series
-				copyTimeSeriesIfNeeded()
+				v = tssPool.Get().(*[]prompb.TimeSeries)
+				tss = append(*v, tss...)
 			}
 			tss = dropAggregatedSeries(tss, matchIdxs.B, rwctx.streamAggrDropInput)
 		} else if rwctx.streamAggrDropInput {
@@ -1125,7 +1058,8 @@ func (rwctx *remoteWriteCtx) TryPushTimeSeries(tss []prompb.TimeSeries, forceDro
 			if rctx == nil {
 				rctx = getRelabelCtx()
 				// Make a copy of tss before dropping aggregated series
-				copyTimeSeriesIfNeeded()
+				v = tssPool.Get().(*[]prompb.TimeSeries)
+				tss = append(*v, tss...)
 			}
 			tss = dropUnaggregatedSeries(tss, matchIdxs.B)
 		}
@@ -1206,41 +1140,24 @@ func (rwctx *remoteWriteCtx) tryPushMetadataInternal(mms []prompb.MetricMetadata
 func (rwctx *remoteWriteCtx) tryPushTimeSeriesInternal(tss []prompb.TimeSeries) bool {
 	var rctx *relabelCtx
 	var v *[]prompb.TimeSeries
-	var olctx *obfuscateLabelsCtx
 	defer func() {
-		if v != nil {
-			*v = prompb.ResetTimeSeries(tss)
-			tssPool.Put(v)
-		}
-		if rctx != nil {
-			putRelabelCtx(rctx)
-		}
-		if olctx != nil {
-			putObfuscateLabelsCtx(olctx)
+		if rctx == nil {
+			return
 		}
+		*v = prompb.ResetTimeSeries(tss)
+		tssPool.Put(v)
+		putRelabelCtx(rctx)
 	}()
 
-	copyTimeSeriesIfNeeded := func() {
-		if v == nil {
-			v = tssPool.Get().(*[]prompb.TimeSeries)
-			tss = append(*v, tss...)
-		}
-	}
-
 	if len(labelsGlobal) > 0 {
 		// Make a copy of tss before adding extra labels to prevent
 		// from affecting time series for other remoteWrite.url configs.
 		rctx = getRelabelCtx()
-		copyTimeSeriesIfNeeded()
+		v = tssPool.Get().(*[]prompb.TimeSeries)
+		tss = append(*v, tss...)
 		rctx.appendExtraLabels(tss, labelsGlobal)
 	}
 
-	if len(rwctx.obfuscateLabels) != 0 {
-		copyTimeSeriesIfNeeded()
-		olctx = getObfuscateLabelsCtx()
-		tss = olctx.obfuscate(tss, rwctx.obfuscateLabels)
-	}
-
 	pss := rwctx.pss
 	idx := rwctx.pssNextIdx.Add(1) % uint64(len(pss))
 
@@ -1261,6 +1178,15 @@ func getRowsCount(tss []prompb.TimeSeries) int {
 	}
 	return rowsCount
 }
+
+func newMapFromStrings(a []string) map[string]struct{} {
+	m := make(map[string]struct{}, len(a))
+	for _, s := range a {
+		m[s] = struct{}{}
+	}
+	return m
+}
+
 func getMaxHourlySeries() int {
 	limit := *maxHourlySeries
 	if limit == -1 || limit > math.MaxInt32 {

app/vmalert-tool/unittest/input.go

@@ -61,15 +61,15 @@ func parseInputSeries(input []series, interval *promutil.Duration, startStamp ti
 	for _, data := range input {
 		expr, err := metricsql.Parse(data.Series)
 		if err != nil {
-			return res, fmt.Errorf("failed to parse series %s: %w", data.Series, err)
+			return res, fmt.Errorf("failed to parse series %s: %v", data.Series, err)
 		}
 		promvals, err := parseInputValue(data.Values, true)
 		if err != nil {
-			return res, fmt.Errorf("failed to parse input series value %s: %w", data.Values, err)
+			return res, fmt.Errorf("failed to parse input series value %s: %v", data.Values, err)
 		}
 		metricExpr, ok := expr.(*metricsql.MetricExpr)
 		if !ok || len(metricExpr.LabelFilterss) != 1 {
-			return res, fmt.Errorf("got invalid input series %s: %w", data.Series, err)
+			return res, fmt.Errorf("got invalid input series %s: %v", data.Series, err)
 		}
 		samples := make([]testutil.Sample, 0, len(promvals))
 		ts := startStamp

app/vmalert-tool/unittest/recording.go

@@ -6,6 +6,7 @@ import (
 	"net/url"
 	"reflect"
 	"sort"
+	"time"
 
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/datasource"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/prompb"
@@ -52,13 +53,13 @@ Outer:
 			if s.Labels != "" {
 				metricsqlExpr, err := metricsql.Parse(s.Labels)
 				if err != nil {
-					checkErrs = append(checkErrs, fmt.Errorf("\n    expr: %q, time: %s, err: %w", mt.Expr,
+					checkErrs = append(checkErrs, fmt.Errorf("\n    expr: %q, time: %s, err: %v", mt.Expr,
 						mt.EvalTime.Duration().String(), fmt.Errorf("failed to parse labels %q: %w", s.Labels, err)))
 					continue Outer
 				}
 				metricsqlMetricExpr, ok := metricsqlExpr.(*metricsql.MetricExpr)
 				if !ok || len(metricsqlMetricExpr.LabelFilterss) > 1 {
-					checkErrs = append(checkErrs, fmt.Errorf("\n    expr: %q, time: %s, err: %w", mt.Expr,
+					checkErrs = append(checkErrs, fmt.Errorf("\n    expr: %q, time: %s, err: %v", mt.Expr,
 						mt.EvalTime.Duration().String(), fmt.Errorf("got invalid exp_samples: %q", s.Labels)))
 					continue Outer
 				}
@@ -93,3 +94,10 @@ Outer:
 	}
 	return
 }
+
+func durationToTime(pd *promutil.Duration) time.Time {
+	if pd == nil {
+		return time.Time{}
+	}
+	return time.UnixMilli(pd.Duration().Milliseconds())
+}

app/vmalert-tool/unittest/unittest.go

@@ -44,19 +44,12 @@ import (
 var (
 	storagePath    string
 	httpListenAddr string
-	// Insert series from 2000-01-01T00:00:00.
-	testStartTime          = time.Date(2000, 1, 1, 0, 0, 0, 0, time.UTC)
+	// insert series from 1970-01-01T00:00:00
+	testStartTime          = time.Unix(0, 0).UTC()
 	testLogLevel           = "ERROR"
 	disableAlertgroupLabel bool
 )
 
-func durationToTime(pd *promutil.Duration) time.Time {
-	if pd == nil {
-		return testStartTime
-	}
-	return testStartTime.Add(pd.Duration())
-}
-
 const (
 	testStoragePath = "vmalert-unittest"
 )
@@ -289,8 +282,7 @@ func processFlags() {
 
 func setUp() {
 	const maxConcurrentRequests = 4
-	maxQueueDuration := 5 * time.Second
-	vmstorage.Init(maxConcurrentRequests, maxQueueDuration, promql.ResetRollupResultCacheIfNeeded)
+	vmstorage.Init(maxConcurrentRequests, promql.ResetRollupResultCacheIfNeeded)
 	ctx, cancel := context.WithTimeout(context.Background(), 30*time.Second)
 	defer cancel()
 	readyCheckFunc := func() bool {
@@ -337,11 +329,11 @@ func (tg *testGroup) test(evalInterval time.Duration, groupOrderMap map[string]i
 
 	q, err := datasource.Init(nil)
 	if err != nil {
-		return []error{fmt.Errorf("failed to init datasource: %w", err)}
+		return []error{fmt.Errorf("failed to init datasource: %v", err)}
 	}
 	rw, err := remotewrite.NewDebugClient()
 	if err != nil {
-		return []error{fmt.Errorf("failed to init wr: %w", err)}
+		return []error{fmt.Errorf("failed to init wr: %v", err)}
 	}
 
 	alertEvalTimesMap := map[time.Duration]struct{}{}

app/vmalert/config/config_test.go

@@ -145,10 +145,10 @@ func TestRuleValidate(t *testing.T) {
 }
 
 func TestGroupValidate_Failure(t *testing.T) {
-	f := func(data []byte, validateExpressions bool, errStrExpected string) {
+	f := func(group *Group, validateExpressions bool, errStrExpected string) {
 		t.Helper()
 
-		_, err := parse(map[string][]byte{"test.yaml": data}, nil, validateExpressions)
+		err := group.Validate(nil, validateExpressions)
 		if err == nil {
 			t.Fatalf("expecting non-nil error")
 		}
@@ -158,238 +158,275 @@ func TestGroupValidate_Failure(t *testing.T) {
 		}
 	}
 
-	f([]byte(`
-groups:
-- name: ""
-`), false, "group name must be set")
+	f(&Group{}, false, "group name must be set")
 
-	f([]byte(`
-groups:
-- name: both record and alert are not set
-  rules:
-  - expr: "sum(up == 0 ) by (host)"
-    for: 10ms
-  - expr: "sumSeries(time('foo.bar',10))"
-`), false, "invalid rule")
+	f(&Group{
+		Name: "both record and alert are not set",
+		Rules: []Rule{
+			{
+				Expr: "sum(up == 0 ) by (host)",
+				For:  promutil.NewDuration(10 * time.Millisecond),
+			},
+			{
+				Expr: "sumSeries(time('foo.bar',10))",
+			},
+		},
+	}, false, "invalid rule")
 
-	f([]byte(`
-groups:
-- name: negative interval
-  interval: -1ms
-`), false, "interval shouldn't be lower than 0")
+	f(&Group{
+		Name:     "negative interval",
+		Interval: promutil.NewDuration(-1),
+	}, false, "interval shouldn't be lower than 0")
 
-	f([]byte(`
-groups:
-- name: too big eval_offset
-  interval: 1m
-  eval_offset: 2m
-`), false, "eval_offset should be smaller than interval")
+	f(&Group{
+		Name:       "too big eval_offset",
+		Interval:   promutil.NewDuration(time.Minute),
+		EvalOffset: promutil.NewDuration(2 * time.Minute),
+	}, false, "eval_offset should be smaller than interval")
 
-	f([]byte(`
-groups:
-- name: too big negative eval_offset
-  interval: 1m
-  eval_offset: -2m
-`), false, "eval_offset should be smaller than interval")
+	f(&Group{
+		Name:       "too big negative eval_offset",
+		Interval:   promutil.NewDuration(time.Minute),
+		EvalOffset: promutil.NewDuration(-2 * time.Minute),
+	}, false, "eval_offset should be smaller than interval")
 
-	f([]byte(`
-groups:
-- name: wrong limit
-  limit: -1
-`), false, "invalid limit")
+	limit := -1
+	f(&Group{
+		Name:  "wrong limit",
+		Limit: &limit,
+	}, false, "invalid limit")
 
-	f([]byte(`
-groups:
-- name: wrong concurrency
-  concurrency: -1
-`), false, "invalid concurrency")
+	f(&Group{
+		Name:        "wrong concurrency",
+		Concurrency: -1,
+	}, false, "invalid concurrency")
 
-	f([]byte(`
-groups:
-- name: test
-  rules:
-  - alert: alert
-    expr: up == 1
-  - alert: alert
-    expr: up == 1
-`), false, "duplicate")
+	f(&Group{
+		Name: "test",
+		Rules: []Rule{
+			{
+				Alert: "alert",
+				Expr:  "up == 1",
+			},
+			{
+				Alert: "alert",
+				Expr:  "up == 1",
+			},
+		},
+	}, false, "duplicate")
 
-	f([]byte(`
-groups:
-- name: test
-  rules:
-  - alert: alert
-    expr: up == 1
-    labels:
-      summary: "{{ value|query }}"
-  - alert: alert
-    expr: up == 1
-    labels:
-      summary: "{{ value|query }}"
-`), false, "duplicate")
+	f(&Group{
+		Name: "test",
+		Rules: []Rule{
+			{Alert: "alert", Expr: "up == 1", Labels: map[string]string{
+				"summary": "{{ value|query }}",
+			}},
+			{Alert: "alert", Expr: "up == 1", Labels: map[string]string{
+				"summary": "{{ value|query }}",
+			}},
+		},
+	}, false, "duplicate")
 
-	f([]byte(`
-groups:
-- name: test
-  rules:
-  - record: record
-    expr: up == 1
-    labels:
-      summary: "{{ value|query }}"
-  - record: record
-    expr: up == 1
-    labels:
-      summary: "{{ value|query }}"
-`), false, "duplicate")
+	f(&Group{
+		Name: "test",
+		Rules: []Rule{
+			{Record: "record", Expr: "up == 1", Labels: map[string]string{
+				"summary": "{{ value|query }}",
+			}},
+			{Record: "record", Expr: "up == 1", Labels: map[string]string{
+				"summary": "{{ value|query }}",
+			}},
+		},
+	}, false, "duplicate")
 
-	f([]byte(`
-groups:
-- name: test thanos
-  type: thanos
-  rules:
-  - alert: alert
-    expr: up == 1
-    labels:
-      description: "{{ value|query }}"
-`), true, "unknown datasource type")
+	f(&Group{
+		Name: "test",
+		Rules: []Rule{
+			{Alert: "alert", Expr: "up == 1", Labels: map[string]string{
+				"summary": "{{ value|query }}",
+			}},
+			{Alert: "alert", Expr: "up == 1", Labels: map[string]string{
+				"description": "{{ value|query }}",
+			}},
+		},
+	}, false, "duplicate")
+
+	f(&Group{
+		Name: "test",
+		Rules: []Rule{
+			{Record: "alert", Expr: "up == 1", Labels: map[string]string{
+				"summary": "{{ value|query }}",
+			}},
+			{Alert: "alert", Expr: "up == 1", Labels: map[string]string{
+				"summary": "{{ value|query }}",
+			}},
+		},
+	}, false, "duplicate")
+
+	f(&Group{
+		Name: "test thanos",
+		Type: NewRawType("thanos"),
+		Rules: []Rule{
+			{Alert: "alert", Expr: "up == 1", Labels: map[string]string{
+				"description": "{{ value|query }}",
+			}},
+		},
+	}, true, "unknown datasource type")
 
 	// validate expressions
-	f([]byte(`
-groups:
-- name: test prometheus expr
-  type: prometheus
-  rules:
-  - record: record
-    expr: "up | 0"
-`), true, "bad MetricsQL expr")
+	f(&Group{
+		Name: "test prometheus expr",
+		Type: NewPrometheusType(),
+		Rules: []Rule{
+			{
+				Record: "record",
+				Expr:   "up | 0",
+			},
+		},
+	}, true, "bad MetricsQL expr")
 
-	f([]byte(`
-groups:
-- name: test graphite expr
-  type: graphite
-  rules:
-  - alert: alert
-    expr: up == 1
-    labels:
-      description: some-description
-`), true, "bad GraphiteQL expr")
+	f(&Group{
+		Name: "test graphite expr",
+		Type: NewGraphiteType(),
+		Rules: []Rule{
+			{Alert: "alert", Expr: "up == 1", Labels: map[string]string{
+				"description": "some-description",
+			}},
+		},
+	}, true, "bad GraphiteQL expr")
 
-	f([]byte(`
-groups:
-- name: test vlogs expr
-  type: vlogs
-  rules:
-  - alert: alert
-    expr: "stats count(*) as requests"
-`), true, "bad LogsQL expr")
+	f(&Group{
+		Name: "test vlogs expr",
+		Type: NewVLogsType(),
+		Rules: []Rule{
+			{Alert: "alert", Expr: "stats count(*) as requests"},
+		},
+	}, true, "bad LogsQL expr")
 
-	f([]byte(`
-groups:
-- name: test vlogs expr multipart
-  type: vlogs
-  rules:
-  - alert: alert
-    expr: "_time: 1m | stats by (path, _time: 1m) count(*) as requests"
-`), true, "bad LogsQL expr")
+	f(&Group{
+		Name: "test vlogs expr",
+		Type: NewVLogsType(),
+		Rules: []Rule{
+			{Alert: "alert", Expr: "_time: 1m | stats by (path, _time: 1m) count(*) as requests"},
+		},
+	}, true, "bad LogsQL expr")
 
-	f([]byte(`
-groups:
-- name: test graphite with prometheus expr
-  type: graphite
-  rules:
-  - record: r1
-    expr: "sumSeries(time('foo.bar',10))"
-    for: 10ms
-  - record: r2
-    expr: "sum(up == 0 ) by (host)"
-`), true, "bad GraphiteQL expr")
+	f(&Group{
+		Name: "test graphite with prometheus expr",
+		Type: NewGraphiteType(),
+		Rules: []Rule{
+			{
+				Record: "r1",
+				ID:     1,
+				Expr:   "sumSeries(time('foo.bar',10))",
+				For:    promutil.NewDuration(10 * time.Millisecond),
+			},
+			{
+				Record: "r2",
+				ID:     2,
+				Expr:   "sum(up == 0 ) by (host)",
+			},
+		},
+	}, true, "bad GraphiteQL expr")
 
-	f([]byte(`
-groups:
-- name: test vlogs with prometheus expr
-  type: vlogs
-  rules:
-  - record: r1
-    expr: "sum(up == 0 ) by (host)"
-    for: 10ms
-`), true, "bad LogsQL expr")
+	f(&Group{
+		Name: "test vlogs with prometheus exp",
+		Type: NewVLogsType(),
+		Rules: []Rule{
+			{
+				Record: "r1",
+				Expr:   "sum(up == 0 ) by (host)",
+				For:    promutil.NewDuration(10 * time.Millisecond),
+			},
+		},
+	}, true, "bad LogsQL expr")
 
-	f([]byte(`
-groups:
-- name: test prometheus with vlogs expr
-  type: prometheus
-  rules:
-  - record: r1
-    expr: "* | stats by (path) count()"
-    for: 10ms
-`), true, "bad MetricsQL expr")
+	f(&Group{
+		Name: "test prometheus with vlogs exp",
+		Type: NewPrometheusType(),
+		Rules: []Rule{
+			{
+				Record: "r1",
+				Expr:   "* | stats by (path) count()",
+				For:    promutil.NewDuration(10 * time.Millisecond),
+			},
+		},
+	}, true, "bad MetricsQL expr")
 }
 
 func TestGroupValidate_Success(t *testing.T) {
-	f := func(data []byte, validateAnnotations, validateExpressions bool) {
+	f := func(group *Group, validateAnnotations, validateExpressions bool) {
 		t.Helper()
 
 		var validateTplFn ValidateTplFn
 		if validateAnnotations {
 			validateTplFn = notifier.ValidateTemplates
 		}
-		_, err := parse(map[string][]byte{"test.yaml": data}, validateTplFn, validateExpressions)
+		err := group.Validate(validateTplFn, validateExpressions)
 		if err != nil {
 			t.Fatalf("unexpected error: %s", err)
 		}
 	}
 
-	f([]byte(`
-groups:
-- name: test
-  rules:
-  - record: record
-    expr: "up | 0"
-`), false, false)
+	f(&Group{
+		Name: "test",
+		Rules: []Rule{
+			{
+				Record: "record",
+				Expr:   "up | 0",
+			},
+		},
+	}, false, false)
 
-	f([]byte(`
-groups:
-- name: test
-  rules:
-  - alert: alert
-    expr: up == 1
-    labels:
-      summary: "{{ value|query }}"
-`), false, false)
+	f(&Group{
+		Name: "test",
+		Rules: []Rule{
+			{
+				Alert: "alert",
+				Expr:  "up == 1",
+				Labels: map[string]string{
+					"summary": "{{ value|query }}",
+				},
+			},
+		},
+	}, false, false)
 
 	// validate annotations
-	f([]byte(`
-groups:
-- name: test
-  rules:
-  - alert: alert
-    expr: up == 1
-    labels:
-      summary: "\n{{ with printf \"node_memory_MemTotal{job='node',instance='%s'}\" \"localhost\" | query }}\n  {{ . | first | value | humanize1024 }}B\n{{ end }}"
-`), true, false)
+	f(&Group{
+		Name: "test",
+		Rules: []Rule{
+			{
+				Alert: "alert",
+				Expr:  "up == 1",
+				Labels: map[string]string{
+					"summary": `
+{{ with printf "node_memory_MemTotal{job='node',instance='%s'}" "localhost" | query }}
+  {{ . | first | value | humanize1024 }}B
+{{ end }}`,
+				},
+			},
+		},
+	}, true, false)
 
 	// validate expressions
-	f([]byte(`
-groups:
-- name: test prometheus
-  type: prometheus
-  rules:
-  - alert: alert
-    expr: up == 1
-    labels:
-      description: "{{ value|query }}"
-`), false, true)
-
-	f([]byte(`
-groups:
-- name: test victorialogs
-  type: vlogs
-  rules:
-  - alert: alert
-    expr: " _time: 1m | stats count(*) as requests"
-    labels:
-      description: "{{ value|query }}"
-`), false, true)
+	f(&Group{
+		Name: "test prometheus",
+		Type: NewPrometheusType(),
+		Rules: []Rule{
+			{Alert: "alert", Expr: "up == 1", Labels: map[string]string{
+				"description": "{{ value|query }}",
+			}},
+		},
+	}, false, true)
+	f(&Group{
+		Name: "test victorialogs",
+		Type: NewVLogsType(),
+		Rules: []Rule{
+			{Alert: "alert", Expr: " _time: 1m | stats count(*) as requests", Labels: map[string]string{
+				"description": "{{ value|query }}",
+			}},
+		},
+	}, false, true)
 }
 
 func TestHashRule_NotEqual(t *testing.T) {

app/vmalert/datasource/client.go

@@ -11,7 +11,6 @@ import (
 	"strings"
 	"time"
 
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/netutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/promauth"
@@ -268,11 +267,7 @@ func (c *Client) do(req *http.Request) (*http.Response, error) {
 	if resp.StatusCode != http.StatusOK {
 		body, _ := io.ReadAll(resp.Body)
 		_ = resp.Body.Close()
-		err = &httpserver.ErrorWithStatusCode{
-			StatusCode: resp.StatusCode,
-			Err:        fmt.Errorf("unexpected response code %d for %s. Response body %s", resp.StatusCode, ru, body),
-		}
-		return nil, err
+		return nil, fmt.Errorf("unexpected response code %d for %s. Response body %s", resp.StatusCode, ru, body)
 	}
 	return resp, nil
 }

app/vmalert/datasource/client_prom.go

@@ -89,7 +89,7 @@ func (pi *promInstant) Unmarshal(b []byte) error {
 		labels.Visit(func(key []byte, v *fastjson.Value) {
 			lv, errLocal := v.StringBytes()
 			if errLocal != nil {
-				err = fmt.Errorf("error when parsing label value %q: %w", v, errLocal)
+				err = fmt.Errorf("error when parsing label value %q: %s", v, errLocal)
 				return
 			}
 			r.Labels = append(r.Labels, prompb.Label{
@@ -112,7 +112,7 @@ func (pi *promInstant) Unmarshal(b []byte) error {
 		r.Timestamps = []int64{sample[0].GetInt64()}
 		val, err := sample[1].StringBytes()
 		if err != nil {
-			return fmt.Errorf("error when parsing `value` object %q: %w", sample[1], err)
+			return fmt.Errorf("error when parsing `value` object %q: %s", sample[1], err)
 		}
 		f, err := strconv.ParseFloat(bytesutil.ToUnsafeString(val), 64)
 		if err != nil {

app/vmalert/datasource/init.go

@@ -11,7 +11,6 @@ import (
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/vmalertutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/flagutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httputil"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/promauth"
 )
 
@@ -95,12 +94,6 @@ func Init(extraParams url.Values) (QuerierBuilder, error) {
 		tr.MaxIdleConns = tr.MaxIdleConnsPerHost
 	}
 	tr.IdleConnTimeout = *idleConnectionTimeout
-	hc := &http.Client{Transport: tr}
-	datasourceURL, err := url.Parse(*addr)
-	if err != nil {
-		logger.Fatalf("BUG: cannot parse already parsed -datasource.url=%q: %s", *addr, err)
-	}
-	hc.Transport, datasourceURL = httputil.NewLoadBalancerTransport(tr, datasourceURL)
 
 	if extraParams == nil {
 		extraParams = url.Values{}
@@ -127,9 +120,9 @@ func Init(extraParams url.Values) (QuerierBuilder, error) {
 	}
 
 	return &Client{
-		c:                hc,
+		c:                &http.Client{Transport: tr},
 		authCfg:          authCfg,
-		datasourceURL:    strings.TrimSuffix(datasourceURL.String(), "/"),
+		datasourceURL:    strings.TrimSuffix(*addr, "/"),
 		appendTypePrefix: *appendTypePrefix,
 		queryStep:        *queryStep,
 		extraParams:      extraParams,

app/vmalert/main.go

@@ -315,11 +315,6 @@ func configReload(ctx context.Context, m *manager, groupsCfg []config.Group, sig
 
 	parseFn := config.Parse
 	for {
-		select {
-		case <-ctx.Done():
-			return
-		default:
-		}
 		select {
 		case <-ctx.Done():
 			return

app/vmalert/notifier/alert.go

@@ -31,8 +31,6 @@ type Alert struct {
 	State AlertState
 	// Expr contains expression that was executed to generate the Alert
 	Expr string
-	// Interval contains the evaluation interval of the Alert's group
-	Interval time.Duration
 	// ActiveAt defines the moment of time when Alert has become active
 	ActiveAt time.Time
 	// Start defines the moment of time when Alert has become firing
@@ -86,7 +84,6 @@ type AlertTplData struct {
 	Labels    map[string]string
 	Value     float64
 	Expr      string
-	Interval  time.Duration
 	AlertID   uint64
 	GroupID   uint64
 	ActiveAt  time.Time
@@ -99,7 +96,6 @@ var tplHeaders = []string{
 	"{{ $type := .Type }}",
 	"{{ $labels := .Labels }}",
 	"{{ $expr := .Expr }}",
-	"{{ $interval := .Interval }}",
 	"{{ $externalLabels := .ExternalLabels }}",
 	"{{ $externalURL := .ExternalURL }}",
 	"{{ $alertID := .AlertID }}",
@@ -119,7 +115,6 @@ func (a *Alert) ExecTemplate(q templates.QueryFn, labels, annotations map[string
 		Type:     a.Type,
 		Labels:   labels,
 		Expr:     a.Expr,
-		Interval: a.Interval,
 		AlertID:  a.ID,
 		GroupID:  a.GroupID,
 		ActiveAt: a.ActiveAt,

app/vmalert/notifier/alert_test.go

@@ -129,17 +129,6 @@ func TestAlertExecTemplate(t *testing.T) {
 		"exprEscapedHTML":   "vm_rows{"label"="bar"}<0",
 	})
 
-	// interval-template
-	f(&Alert{
-		Interval: 10 * time.Second,
-	}, map[string]string{
-		"interval":         "{{ .Interval }}",
-		"intervalVariable": "{{ $interval }}",
-	}, map[string]string{
-		"interval":         "10s",
-		"intervalVariable": "10s",
-	})
-
 	// query
 	f(&Alert{
 		Expr: `vm_rows{"label"="bar"}>0`,

app/vmalert/remoteread/init.go

@@ -4,14 +4,12 @@ import (
 	"flag"
 	"fmt"
 	"net/http"
-	"net/url"
 	"time"
 
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/datasource"
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/vmalertutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/flagutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httputil"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/promauth"
 )
 
@@ -78,13 +76,7 @@ func Init() (datasource.QuerierBuilder, error) {
 		return nil, fmt.Errorf("failed to create transport for -remoteRead.url=%q: %w", *addr, err)
 	}
 	tr.IdleConnTimeout = *idleConnectionTimeout
-	c := &http.Client{Transport: tr}
-	rrURL, err := url.Parse(*addr)
-	if err != nil {
-		logger.Fatalf("BUG: cannot parse already parsed -remoteRead.url=%q: %s", *addr, err)
-	}
 
-	c.Transport, rrURL = httputil.NewLoadBalancerTransport(tr, rrURL)
 	endpointParams, err := flagutil.ParseJSONMap(*oauth2EndpointParams)
 	if err != nil {
 		return nil, fmt.Errorf("cannot parse JSON for -remoteRead.oauth2.endpointParams=%s: %w", *oauth2EndpointParams, err)
@@ -97,5 +89,6 @@ func Init() (datasource.QuerierBuilder, error) {
 	if err != nil {
 		return nil, fmt.Errorf("failed to configure auth: %w", err)
 	}
-	return datasource.NewPrometheusClient(rrURL.String(), authCfg, false, c), nil
+	c := &http.Client{Transport: tr}
+	return datasource.NewPrometheusClient(*addr, authCfg, false, c), nil
 }

app/vmalert/remotewrite/client.go

@@ -8,7 +8,6 @@ import (
 	"fmt"
 	"io"
 	"net/http"
-	"net/url"
 	"path"
 	"strings"
 	"sync"
@@ -112,18 +111,12 @@ func NewClient(ctx context.Context, cfg Config) (*Client, error) {
 	if cfg.Concurrency > 0 {
 		cc = cfg.Concurrency
 	}
-	hc := &http.Client{
-		Timeout:   *sendTimeout,
-		Transport: cfg.Transport,
-	}
-	rwURL, err := url.Parse(cfg.Addr)
-	if err != nil {
-		logger.Fatalf("cannot parse already parsed -remoteWrite.url=%q: %s", cfg.Addr, err)
-	}
-	hc.Transport, rwURL = httputil.NewLoadBalancerTransport(hc.Transport, rwURL)
 	c := &Client{
-		c:             hc,
-		addr:          strings.TrimSuffix(rwURL.String(), "/"),
+		c: &http.Client{
+			Timeout:   *sendTimeout,
+			Transport: cfg.Transport,
+		},
+		addr:          strings.TrimSuffix(cfg.Addr, "/"),
 		authCfg:       cfg.AuthCfg,
 		flushInterval: cfg.FlushInterval,
 		maxBatchSize:  cfg.MaxBatchSize,

app/vmalert/replay.go

@@ -25,12 +25,11 @@ var (
 	replayMaxDatapoints = flag.Int("replay.maxDatapointsPerQuery", 1e3,
 		"Max number of data points expected in one request. It affects the max time range for every '/query_range' request during the replay. The higher the value, the less requests will be made during replay.")
 	replayRuleRetryAttempts = flag.Int("replay.ruleRetryAttempts", 5,
-		"Defines how many retries to make before giving up on rule if request for it returns a retriable error.")
+		"Defines how many retries to make before giving up on rule if request for it returns an error.")
 	disableProgressBar = flag.Bool("replay.disableProgressBar", false, "Whether to disable rendering progress bars during the replay. "+
 		"Progress bar rendering might be verbose or break the logs parsing, so it is recommended to be disabled when not used in interactive mode.")
 	ruleEvaluationConcurrency = flag.Int("replay.ruleEvaluationConcurrency", 1, "The maximum number of concurrent '/query_range' requests when replay recording rule or alerting rule with for=0. "+
 		"Increasing this value when replaying for a long time, since each request is limited by -replay.maxDatapointsPerQuery.")
-	continueWithExecutionErr = flag.Bool("replay.continueWithExecutionErr", false, "Whether to continue replaying other rules if a rule execution fails with a 422 response code, which can happen due to an expression syntax error or a resource limit being hit.")
 )
 
 func replay(groupsCfg []config.Group, qb datasource.QuerierBuilder, rw remotewrite.RWClient) (totalRows, droppedRows int, err error) {
@@ -74,7 +73,7 @@ func replay(groupsCfg []config.Group, qb datasource.QuerierBuilder, rw remotewri
 
 	for _, cfg := range groupsCfg {
 		ng := rule.NewGroup(cfg, qb, *evaluationInterval, labels)
-		totalRows += ng.Replay(tFrom, tTo, rw, *replayMaxDatapoints, *replayRuleRetryAttempts, *replayRulesDelay, *disableProgressBar, *ruleEvaluationConcurrency, *continueWithExecutionErr)
+		totalRows += ng.Replay(tFrom, tTo, rw, *replayMaxDatapoints, *replayRuleRetryAttempts, *replayRulesDelay, *disableProgressBar, *ruleEvaluationConcurrency)
 	}
 	logger.Infof("replay evaluation finished, generated %d samples", totalRows)
 	if err := rw.Close(); err != nil {

app/vmalert/replay_test.go

@@ -8,10 +8,8 @@ import (
 
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/config"
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/datasource"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/prompb"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/promutil"
-	"github.com/VictoriaMetrics/metricsql"
 )
 
 type fakeReplayQuerier struct {
@@ -34,14 +32,6 @@ func (fc *fakeRWClient) Close() error {
 }
 
 func (fr *fakeReplayQuerier) QueryRange(_ context.Context, q string, from, to time.Time) (res datasource.Result, err error) {
-	_, err = metricsql.Parse(q)
-	if err != nil {
-		return res, &httpserver.ErrorWithStatusCode{
-			StatusCode: 422,
-			Err:        err,
-		}
-	}
-
 	key := fmt.Sprintf("%s+%s", from.Format("15:04:05"), to.Format("15:04:05"))
 	dps, ok := fr.registry[q]
 	if !ok {
@@ -285,28 +275,4 @@ func TestReplay(t *testing.T) {
 			},
 		},
 	}, 10)
-
-	// rule with wrong expression won't break the other rule with continueWithExecutionErr
-	continueWithExecutionErrOld := *continueWithExecutionErr
-	defer func() {
-		*continueWithExecutionErr = continueWithExecutionErrOld
-	}()
-	*continueWithExecutionErr = true
-	f("2021-01-01T12:00:00.000Z", "2021-01-01T12:02:30.000Z", 1, 1, time.Millisecond, []config.Group{
-		{Rules: []config.Rule{{Record: "foo", Expr: "sum(up)"}}},
-		{Rules: []config.Rule{{Record: "bar", Expr: "up ++"}}},
-	}, &fakeReplayQuerier{
-		registry: map[string]map[string][]datasource.Metric{
-			"sum(up)": {
-				"12:00:00+12:01:00": {
-					{
-						Timestamps: []int64{1, 2},
-						Values:     []float64{1, 2},
-					},
-				},
-				"12:01:00+12:02:00": {},
-				"12:02:00+12:02:30": {},
-			},
-		},
-	}, 2)
 }

app/vmalert/rule/alerting.go

@@ -530,7 +530,6 @@ func (ar *AlertingRule) exec(ctx context.Context, ts time.Time, limit int) ([]pr
 				ar.logDebugf(ts, a, "INACTIVE => PENDING")
 			}
 			a.Value = m.Values[0]
-			a.Interval = ar.EvalInterval
 			a.Annotations = annotations
 			a.KeepFiringSince = time.Time{}
 			continue
@@ -602,7 +601,7 @@ func (ar *AlertingRule) exec(ctx context.Context, ts time.Time, limit int) ([]pr
 func (ar *AlertingRule) expandLabelTemplates(m datasource.Metric, qFn templates.QueryFn) (*labelSet, error) {
 	ls, err := ar.toLabels(m, qFn)
 	if err != nil {
-		return ls, fmt.Errorf("failed to expand label templates: %w", err)
+		return ls, fmt.Errorf("failed to expand label templates: %s", err)
 	}
 	return ls, nil
 }
@@ -613,7 +612,6 @@ func (ar *AlertingRule) expandAnnotationTemplates(m datasource.Metric, qFn templ
 		Type:      ar.Type.String(),
 		Labels:    ls.origin,
 		Expr:      ar.Expr,
-		Interval:  ar.EvalInterval,
 		AlertID:   hash(ls.processed),
 		GroupID:   ar.GroupID,
 		ActiveAt:  activeAt,
@@ -622,7 +620,7 @@ func (ar *AlertingRule) expandAnnotationTemplates(m datasource.Metric, qFn templ
 	}
 	as, err := notifier.ExecTemplate(qFn, ar.Annotations, tplData)
 	if err != nil {
-		return as, fmt.Errorf("failed to expand annotation templates: %w", err)
+		return as, fmt.Errorf("failed to expand annotation templates: %s", err)
 	}
 	return as, nil
 }
@@ -675,7 +673,6 @@ func (ar *AlertingRule) newAlert(m datasource.Metric, start time.Time, labels, a
 		Name:        ar.Name,
 		Type:        ar.Type.String(),
 		Expr:        ar.Expr,
-		Interval:    ar.EvalInterval,
 		For:         ar.For,
 		ActiveAt:    start,
 		Value:       m.Values[0],

app/vmalert/rule/alerting_test.go

@@ -662,7 +662,6 @@ func TestAlertingRuleExecRange(t *testing.T) {
 			GroupID:     fakeGroup.GetID(),
 			Name:        "for-pending",
 			Type:        config.NewPrometheusType().String(),
-			Interval:    time.Second,
 			Labels:      map[string]string{"alertname": "for-pending"},
 			Annotations: map[string]string{},
 			State:       notifier.StatePending,
@@ -683,7 +682,6 @@ func TestAlertingRuleExecRange(t *testing.T) {
 			GroupID:     fakeGroup.GetID(),
 			Name:        "for-firing",
 			Type:        config.NewPrometheusType().String(),
-			Interval:    3 * time.Second,
 			Labels:      map[string]string{"alertname": "for-firing"},
 			Annotations: map[string]string{},
 			State:       notifier.StateFiring,
@@ -705,7 +703,6 @@ func TestAlertingRuleExecRange(t *testing.T) {
 			GroupID:     fakeGroup.GetID(),
 			Name:        "for-hold-pending",
 			Type:        config.NewPrometheusType().String(),
-			Interval:    time.Second,
 			Labels:      map[string]string{"alertname": "for-hold-pending"},
 			Annotations: map[string]string{},
 			State:       notifier.StatePending,
@@ -762,7 +759,6 @@ func TestAlertingRuleExecRange(t *testing.T) {
 			GroupID:     fakeGroup.GetID(),
 			Name:        "multi-series",
 			Type:        config.NewPrometheusType().String(),
-			Interval:    3 * time.Second,
 			Labels:      map[string]string{"alertname": "multi-series"},
 			Annotations: map[string]string{},
 			State:       notifier.StateFiring,
@@ -775,7 +771,6 @@ func TestAlertingRuleExecRange(t *testing.T) {
 			GroupID:     fakeGroup.GetID(),
 			Name:        "multi-series",
 			Type:        config.NewPrometheusType().String(),
-			Interval:    3 * time.Second,
 			Labels:      map[string]string{"alertname": "multi-series", "foo": "bar"},
 			Annotations: map[string]string{},
 			State:       notifier.StatePending,
@@ -1139,8 +1134,7 @@ func TestAlertingRule_Template(t *testing.T) {
 		fq.Add(metrics...)
 		fq.SetPartialResponse(isResponsePartial)
 
-		ts := time.Unix(3600, 0)
-		if _, err := rule.exec(context.TODO(), ts, 0); err != nil {
+		if _, err := rule.exec(context.TODO(), time.Now(), 0); err != nil {
 			t.Fatalf("unexpected error: %s", err)
 		}
 		for hash, expAlert := range alertsExpected {
@@ -1158,14 +1152,12 @@ func TestAlertingRule_Template(t *testing.T) {
 	}
 
 	f(&AlertingRule{
-		Name:         "common",
-		EvalInterval: time.Hour,
+		Name: "common",
 		Labels: map[string]string{
 			"region": "east",
 		},
 		Annotations: map[string]string{
-			"summary":   `{{ $labels.alertname }}: Too high connection number for "{{ $labels.instance }}"`,
-			"dashboard": `&from={{ ($activeAt.Add (parseDurationTime (printf "-%s" .Interval))).UnixMilli }}&to={{ $activeAt.UnixMilli }}`,
+			"summary": `{{ $labels.alertname }}: Too high connection number for "{{ $labels.instance }}"`,
 		},
 		alerts: make(map[uint64]*notifier.Alert),
 	}, []datasource.Metric{
@@ -1174,8 +1166,7 @@ func TestAlertingRule_Template(t *testing.T) {
 	}, false, map[uint64]*notifier.Alert{
 		hash(map[string]string{alertNameLabel: "common", "region": "east", "instance": "foo"}): {
 			Annotations: map[string]string{
-				"summary":   `common: Too high connection number for "foo"`,
-				"dashboard": "&from=0&to=3600000",
+				"summary": `common: Too high connection number for "foo"`,
 			},
 			Labels: map[string]string{
 				alertNameLabel: "common",
@@ -1185,8 +1176,7 @@ func TestAlertingRule_Template(t *testing.T) {
 		},
 		hash(map[string]string{alertNameLabel: "common", "region": "east", "instance": "bar"}): {
 			Annotations: map[string]string{
-				"summary":   `common: Too high connection number for "bar"`,
-				"dashboard": "&from=0&to=3600000",
+				"summary": `common: Too high connection number for "bar"`,
 			},
 			Labels: map[string]string{
 				alertNameLabel: "common",
@@ -1398,7 +1388,7 @@ func TestAlertingRule_ToLabels(t *testing.T) {
 		"alertname":     "ConfigurationReloadFailure",
 		"alertgroup":    "vmalert",
 		"pod":           "vmalert-0",
-		"invalid_label": `error evaluating template: template: :1:326: executing "" at <.Values.mustRuntimeFail>: can't evaluate field Values in type notifier.tplData`,
+		"invalid_label": `error evaluating template: template: :1:298: executing "" at <.Values.mustRuntimeFail>: can't evaluate field Values in type notifier.tplData`,
 	}
 
 	expectedProcessedLabels := map[string]string{
@@ -1408,7 +1398,7 @@ func TestAlertingRule_ToLabels(t *testing.T) {
 		"exported_alertname": "ConfigurationReloadFailure",
 		"group":              "vmalert",
 		"alertgroup":         "vmalert",
-		"invalid_label":      `error evaluating template: template: :1:326: executing "" at <.Values.mustRuntimeFail>: can't evaluate field Values in type notifier.tplData`,
+		"invalid_label":      `error evaluating template: template: :1:298: executing "" at <.Values.mustRuntimeFail>: can't evaluate field Values in type notifier.tplData`,
 	}
 
 	ls, err := ar.toLabels(metric, nil)

app/vmalert/rule/group.go

@@ -97,7 +97,6 @@ type groupMetrics struct {
 	iterationMissed   *metrics.Counter
 	iterationReset    *metrics.Counter
 	iterationInterval *metrics.Gauge
-	iterationLimit    *metrics.Gauge
 }
 
 // merges group rule labels into result map
@@ -337,12 +336,6 @@ func (g *Group) Init() {
 		i := g.Interval.Seconds()
 		return i
 	})
-	g.metrics.iterationLimit = g.metrics.set.NewGauge(fmt.Sprintf(`vmalert_rule_group_results_limit{%s}`, labels), func() float64 {
-		g.mu.RLock()
-		limit := g.Limit
-		g.mu.RUnlock()
-		return float64(limit)
-	})
 	for i := range g.Rules {
 		g.Rules[i].registerMetrics(g.metrics.set)
 	}
@@ -548,7 +541,7 @@ func (g *Group) infof(format string, args ...any) {
 }
 
 // Replay performs group replay
-func (g *Group) Replay(start, end time.Time, rw remotewrite.RWClient, maxDataPoint, replayRuleRetryAttempts int, replayDelay time.Duration, disableProgressBar bool, ruleEvaluationConcurrency int, continueWithExecutionErr bool) int {
+func (g *Group) Replay(start, end time.Time, rw remotewrite.RWClient, maxDataPoint, replayRuleRetryAttempts int, replayDelay time.Duration, disableProgressBar bool, ruleEvaluationConcurrency int) int {
 	var total int
 	step := g.Interval * time.Duration(maxDataPoint)
 	ri := rangeIterator{start: start, end: end, step: step}
@@ -576,7 +569,7 @@ func (g *Group) Replay(start, end time.Time, rw remotewrite.RWClient, maxDataPoi
 			if !disableProgressBar {
 				bar = pb.StartNew(iterations)
 			}
-			total += replayRuleRange(rule, ri, bar, rw, replayRuleRetryAttempts, ruleEvaluationConcurrency, continueWithExecutionErr)
+			total += replayRuleRange(rule, ri, bar, rw, replayRuleRetryAttempts, ruleEvaluationConcurrency)
 			if bar != nil {
 				bar.Finish()
 			}
@@ -598,7 +591,7 @@ func (g *Group) Replay(start, end time.Time, rw remotewrite.RWClient, maxDataPoi
 		rule := g.Rules[i]
 		sem <- struct{}{}
 		wg.Go(func() {
-			res <- replayRuleRange(rule, ri, bar, rw, replayRuleRetryAttempts, ruleEvaluationConcurrency, continueWithExecutionErr)
+			res <- replayRuleRange(rule, ri, bar, rw, replayRuleRetryAttempts, ruleEvaluationConcurrency)
 			<-sem
 		})
 	}
@@ -618,7 +611,7 @@ func (g *Group) Replay(start, end time.Time, rw remotewrite.RWClient, maxDataPoi
 	return total
 }
 
-func replayRuleRange(r Rule, ri rangeIterator, bar *pb.ProgressBar, rw remotewrite.RWClient, replayRuleRetryAttempts, ruleEvaluationConcurrency int, continueWithExecutionErr bool) int {
+func replayRuleRange(r Rule, ri rangeIterator, bar *pb.ProgressBar, rw remotewrite.RWClient, replayRuleRetryAttempts, ruleEvaluationConcurrency int) int {
 	fmt.Printf("> Rule %q (ID: %d)\n", r, r.ID())
 	// alerting rule with for>0 can't be replayed concurrently, since the status change might depend on the previous evaluation
 	// see https://github.com/VictoriaMetrics/VictoriaMetrics/commit/abcb21aa5ee918ba9a4e9cde495dba06e1e9564c
@@ -633,7 +626,7 @@ func replayRuleRange(r Rule, ri rangeIterator, bar *pb.ProgressBar, rw remotewri
 		start := ri.s
 		end := ri.e
 		wg.Go(func() {
-			n, err := replayRule(r, start, end, rw, replayRuleRetryAttempts, continueWithExecutionErr)
+			n, err := replayRule(r, start, end, rw, replayRuleRetryAttempts)
 			if err != nil {
 				logger.Fatalf("rule %q: %s", r, err)
 			}

app/vmalert/rule/recording_test.go

@@ -457,10 +457,12 @@ func TestSetIntervalAsTimeFilter(t *testing.T) {
 	f(`* | count()`, "vlogs", true)
 	f(`error OR _time:5m  | count()`, "vlogs", true)
 	f(`(_time: 5m AND error) OR (_time: 5m AND warn) | count()`, "vlogs", true)
+	f(`* | error OR _time:5m | count()`, "vlogs", true)
 
 	f(`_time:5m | count()`, "vlogs", false)
 	f(`_time:2023-04-25T22:45:59Z | count()`, "vlogs", false)
 	f(`error AND _time:5m | count()`, "vlogs", false)
+	f(`* | error AND _time:5m | count()`, "vlogs", false)
 }
 
 func TestRecordingRuleExec_Partial(t *testing.T) {

app/vmalert/rule/rule.go

@@ -4,14 +4,12 @@ import (
 	"context"
 	"errors"
 	"fmt"
-	"net/http"
 	"sync"
 	"time"
 
 	"github.com/VictoriaMetrics/metrics"
 
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/remotewrite"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/prompb"
 )
@@ -120,7 +118,7 @@ func (s *ruleState) add(e StateEntry) {
 	s.entries[s.cur] = e
 }
 
-func replayRule(r Rule, start, end time.Time, rw remotewrite.RWClient, replayRuleRetryAttempts int, continueWithExecutionErr bool) (int, error) {
+func replayRule(r Rule, start, end time.Time, rw remotewrite.RWClient, replayRuleRetryAttempts int) (int, error) {
 	var err error
 	var tss []prompb.TimeSeries
 	for i := range replayRuleRetryAttempts {
@@ -128,21 +126,6 @@ func replayRule(r Rule, start, end time.Time, rw remotewrite.RWClient, replayRul
 		if err == nil {
 			break
 		}
-		// retry request if possible to tolerate temporary network or datasource unavailability issues
-		var esc *httpserver.ErrorWithStatusCode
-		if errors.As(err, &esc) {
-			statusCode := esc.StatusCode
-			// if the status code is 422, it means that the query was executed but failed due to an expression syntax error or a the resource limit being hit,
-			// continue replaying but skip the problematic execution if continueWithExecutionErr is true, otherwise, return the error without retry.
-			if statusCode == http.StatusUnprocessableEntity {
-				if continueWithExecutionErr {
-					logger.Errorf("rule %q: %s", r, err)
-					return 0, nil
-				} else {
-					return 0, err
-				}
-			}
-		}
 		logger.Errorf("attempt %d to execute rule %q failed: %s", i+1, r, err)
 		time.Sleep(time.Second)
 	}

app/vmalert/rule/web.go

@@ -75,13 +75,10 @@ type GroupAlerts struct {
 // ApiRule represents a Rule for web view
 // see https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#get-apiv1rules
 type ApiRule struct {
-	// Rule state must be one of these under following scenarios:
-	//  "pending": at least 1 alert in the rule in pending state and no other alert in firing state. (only for alerting rules)
-	//  "firing": at least 1 alert in the rule in firing state. (only for alerting rules)
-	//  "inactive": rule's last evaluation was successful but no alert in the rule in firing or pending state. (only for alerting rules)
-	//  "unhealthy": rule's last evaluation was failed with error. (for both alerting and recording rules)
-	// 	"nomatch": rule's last evaluation was successful but no time series matched the rule's expression. (for both alerting and recording rules)
-	//  "ok": the recording rule's last evaluation was successful. (only for recording rules)
+	// State must be one of these under following scenarios
+	//  "pending": at least 1 alert in the rule in pending state and no other alert in firing ruleState.
+	//  "firing": at least 1 alert in the rule in firing state.
+	//  "inactive": no alert in the rule in firing or pending state.
 	State string `json:"state"`
 	Name  string `json:"name"`
 	// Query represents Rule's `expression` field
@@ -240,7 +237,6 @@ func NewAlertAPI(ar *AlertingRule, a *notifier.Alert) *ApiAlert {
 }
 
 func (r *ApiRule) ExtendState() {
-	// if alerting rule already has alerts, then state is already set to either "pending" or "firing" and we don't need to change it
 	if len(r.Alerts) > 0 {
 		return
 	}

app/vmalert/web.go

@@ -77,7 +77,7 @@ var (
 func marshalJson(v any, kind string) ([]byte, *httpserver.ErrorWithStatusCode) {
 	data, err := json.Marshal(v)
 	if err != nil {
-		return nil, errResponse(fmt.Errorf("failed to marshal %s: %w", kind, err), http.StatusInternalServerError)
+		return nil, errResponse(fmt.Errorf("failed to marshal %s: %s", kind, err), http.StatusInternalServerError)
 	}
 	return data, nil
 }
@@ -115,7 +115,7 @@ func (rh *requestHandler) handler(w http.ResponseWriter, r *http.Request) bool {
 		}
 		WriteRule(w, r, rule)
 		return true
-	// used by old vmalert UI
+	// current used by old vmalert UI and Grafana Alerts
 	case "/vmalert/groups", "/rules":
 		rf, err := newRulesFilter(r)
 		if err != nil {
@@ -128,8 +128,6 @@ func (rh *requestHandler) handler(w http.ResponseWriter, r *http.Request) bool {
 			state = rf.states[0]
 			rf.states = rf.states[:1]
 		}
-		// enable extendedStates by default for vmalert UI
-		rf.extendedStates = true
 		lr := rh.groups(rf)
 		WriteListGroups(w, r, lr.Data.Groups, state)
 		return true
@@ -545,8 +543,6 @@ func (rh *requestHandler) groups(rf *rulesFilter) *listGroupsResponse {
 			if !groupFound && !strings.Contains(strings.ToLower(rule.Name), rf.search) {
 				continue
 			}
-			// extendedStates is used by the vmalert UI to extend the rule state with values such as "nomatch" and "unhealthy".
-			// those states are not supported by Grafana and not part of the Prometheus API spec yet
 			if rf.extendedStates {
 				rule.ExtendState()
 			}

app/vmalert/web.qtpl

@@ -130,12 +130,9 @@
                             data-bs-target="#item-{%s g.ID %}"
                         >
                             <span class="d-flex gap-2">
-                                {% if g.States["inactive"] > 0 %}<span class="badge bg-light text-success border border-success" title="None of the alert instances is in a pending or firing state">{%d g.States["inactive"] %} inactive</span> {% endif %}
-                                {% if g.States["pending"] > 0 %}<span class="badge bg-warning text-dark" title="At least one alert instance is pending">{%d g.States["pending"] %} pending</span> {% endif %}
-                                {% if g.States["firing"] > 0 %}<span class="badge bg-danger" title="At least one alert instance is firing">{%d g.States["firing"] %} firing</span> {% endif %}
-                                {% if g.States["ok"] > 0 %}<span class="badge bg-success" title="Recording rule last evaluation succeeded">{%d g.States["ok"] %} ok</span>{% endif %}
-                                {% if g.States["unhealthy"] > 0 %}<span class="badge bg-danger" title="Last evaluation failed with an error">{%d g.States["unhealthy"] %} unhealthy</span> {% endif %}
-                                {% if g.States["nomatch"] > 0 %}<span class="badge bg-warning" title="Rule expression matched no time series">{%d g.States["nomatch"] %} nomatch</span> {% endif %}
+                                {% if g.States["unhealthy"] > 0 %}<span class="badge bg-danger" title="Number of rules with status Error">{%d g.States["unhealthy"] %}</span> {% endif %}
+                                {% if g.States["nomatch"] > 0 %}<span class="badge bg-warning" title="Number of rules with status NoMatch">{%d g.States["nomatch"] %}</span> {% endif %}
+                                <span class="badge bg-success" title="Number of rules with status Ok">{%d g.States["ok"] %}</span>
                             </span>
                         </span>
                     </span>
@@ -172,7 +169,7 @@
                             <thead>
                                 <tr>
                                     <th scope="col" class="w-60">Rule</th>
-                                    <th scope="col" class="w-20" class="text-center" title="How many series were produced by the rule">Series Returned</th>
+                                    <th scope="col" class="w-20" class="text-center" title="How many series were produced by the rule">Series</th>
                                     <th scope="col" class="w-20" class="text-center" title="How many seconds ago rule was executed">Updated</th>
                                 </tr>
                             </thead>
@@ -191,21 +188,8 @@
                                                     {% else %}
                                                         <b>record:</b> {%s r.Name %}
                                                     {% endif %}
-                                                    {% if r.State == "inactive" %}
-                                                        <span><a class="badge bg-success">{%s r.State %}</a></span>
-                                                    {% elseif  r.State == "pending" %}
-                                                        <span><a class="badge bg-warning">{%s r.State %}</a></span>
-                                                    {% elseif  r.State == "firing" %}
-                                                        <span><a class="badge bg-danger">{%s r.State %}</a></span>
-                                                    {% elseif  r.State == "ok" %}
-                                                        <span><a class="badge bg-success">{%s r.State %}</a></span>
-                                                    {% elseif  r.State == "unhealthy" %}
-                                                        <span><a class="badge bg-danger">{%s r.State %}</a></span>
-                                                    {% elseif  r.State == "nomatch" %}
-                                                        <span><a class="badge bg-warning">{%s r.State %}</a></span>
-                                                    {% endif %}
-                                                    {%= seriesFetchedWarn(prefix, &r) %}
                                                     |
+                                                    {%= seriesFetchedWarn(prefix, &r) %}
                                                     <span><a target="_blank" href="{%s prefix+r.WebLink() %}">Details</a></span>
                                                 </div>
                                                 <div class="col-12">

app/vmauth/auth_config.go

@@ -118,10 +118,9 @@ type AccessLogFilters struct {
 }
 
 func (ui *UserInfo) logRequest(r *http.Request, userName string, statusCode int, duration time.Duration) {
-	if ui == nil || ui.AccessLog == nil {
+	if ui.AccessLog == nil {
 		return
 	}
-
 	filters := ui.AccessLog.Filters
 	if filters != nil && len(filters.SkipStatusCodes) > 0 {
 		if slices.Contains(filters.SkipStatusCodes, statusCode) {
@@ -135,17 +134,6 @@ func (ui *UserInfo) logRequest(r *http.Request, userName string, statusCode int,
 		r.Host, requestURI, statusCode, remoteAddr, r.UserAgent(), r.Referer(), duration.Milliseconds(), userName)
 }
 
-// hasAnyURLs reports whether ui has at least one backend URL route configured.
-// It is used only for unauthorized_user config section, since other users
-// must always have either URLPrefix or URLMaps set.
-func (ui *UserInfo) hasAnyURLs() bool {
-	if ui == nil {
-		return false
-	}
-
-	return ui.URLPrefix != nil || len(ui.URLMaps) > 0 || ui.DefaultURL != nil
-}
-
 // HeadersConf represents config for request and response headers.
 type HeadersConf struct {
 	RequestHeaders     []*Header `yaml:"headers,omitempty"`
@@ -852,11 +840,6 @@ func authConfigReloader(sighupCh <-chan os.Signal) {
 	}
 
 	for {
-		select {
-		case <-stopCh:
-			return
-		default:
-		}
 		select {
 		case <-stopCh:
 			return
@@ -923,8 +906,7 @@ func reloadAuthConfigData(data []byte) (bool, error) {
 		return false, fmt.Errorf("failed to parse auth config: %w", err)
 	}
 
-	oidcDP := &oidcDiscovererPool{}
-	jui, err := parseJWTUsers(ac, oidcDP)
+	jui, oidcDP, err := parseJWTUsers(ac)
 	if err != nil {
 		return false, fmt.Errorf("failed to parse JWT users from auth config: %w", err)
 	}
@@ -995,11 +977,8 @@ func parseAuthConfig(data []byte) (*AuthConfig, error) {
 		if err := parseJWTPlaceholdersForUserInfo(ui, false); err != nil {
 			return nil, err
 		}
-
-		if ui.hasAnyURLs() {
-			if err := ui.initURLs(); err != nil {
-				return nil, err
-			}
+		if err := ui.initURLs(); err != nil {
+			return nil, err
 		}
 
 		metricLabels, err := ui.getMetricLabels()

app/vmauth/example_config.yml

@@ -140,18 +140,6 @@ users:
   - "ProjectID: {{.MetricsProjectID}}"
   url_prefix: "http://vminsert:8480/insert/prometheus"
 
-# JWT-based routing that relies solely on custom claims.
-# The `vm_access` claim is missing, default value will be used.
-# e.g. {"role": "admin"}.
-- name: jwt-custom-claims
-  jwt:
-    skip_verify: true
-    vm_default_access_claim:
-        metrics_account_id: 1
-    match_claims:
-      role: admin
-  url_prefix: "http://vmselect-admin:8481/select/0/prometheus"
-
 # Requests without Authorization header are proxied according to `unauthorized_user` section.
 # Requests are proxied in round-robin fashion between `url_prefix` backends.
 # The deny_partial_response query arg is added to all the proxied requests.

app/vmauth/jwt.go

@@ -65,8 +65,6 @@ type JWTConfig struct {
 	MatchClaims       map[string]string `yaml:"match_claims,omitempty"`
 	parsedMatchClaims []*jwt.Claim
 
-	DefaultVMAccessClaim *jwt.VMAccessClaim `yaml:"default_vm_access_claim,omitempty"`
-
 	// verifierPool is used to verify JWT tokens.
 	// It is initialized from PublicKeys and/or PublicKeyFiles.
 	// In this case, it is initialized once at config reload and never updated until next reload
@@ -74,8 +72,9 @@ type JWTConfig struct {
 	verifierPool atomic.Pointer[jwt.VerifierPool]
 }
 
-func parseJWTUsers(ac *AuthConfig, oidcDP *oidcDiscovererPool) ([]*UserInfo, error) {
+func parseJWTUsers(ac *AuthConfig) ([]*UserInfo, *oidcDiscovererPool, error) {
 	jui := make([]*UserInfo, 0, len(ac.Users))
+	oidcDP := &oidcDiscovererPool{}
 
 	uniqClaims := make(map[string]*UserInfo)
 	var sortedClaims []string
@@ -86,10 +85,10 @@ func parseJWTUsers(ac *AuthConfig, oidcDP *oidcDiscovererPool) ([]*UserInfo, err
 		}
 
 		if ui.AuthToken != "" || ui.BearerToken != "" || ui.Username != "" || ui.Password != "" {
-			return nil, fmt.Errorf("auth_token, bearer_token, username and password cannot be specified if jwt is set")
+			return nil, nil, fmt.Errorf("auth_token, bearer_token, username and password cannot be specified if jwt is set")
 		}
 		if len(jwtToken.PublicKeys) == 0 && len(jwtToken.PublicKeyFiles) == 0 && !jwtToken.SkipVerify && jwtToken.OIDC == nil {
-			return nil, fmt.Errorf("jwt must contain at least a single public key, public_key_files, oidc or have skip_verify=true")
+			return nil, nil, fmt.Errorf("jwt must contain at least a single public key, public_key_files, oidc or have skip_verify=true")
 		}
 		var claimsString string
 		sortedClaims = sortedClaims[:0]
@@ -98,7 +97,7 @@ func parseJWTUsers(ac *AuthConfig, oidcDP *oidcDiscovererPool) ([]*UserInfo, err
 			sortedClaims = append(sortedClaims, fmt.Sprintf("%s=%s", ck, cv))
 			pc, err := jwt.NewClaim(ck, cv)
 			if err != nil {
-				return nil, fmt.Errorf("incorrect match claim, key=%q, value regex=%q: %w", ck, cv, err)
+				return nil, nil, fmt.Errorf("incorrect match claim, key=%q, value regex=%q: %w", ck, cv, err)
 			}
 			parsedClaims = append(parsedClaims, pc)
 		}
@@ -107,7 +106,7 @@ func parseJWTUsers(ac *AuthConfig, oidcDP *oidcDiscovererPool) ([]*UserInfo, err
 		claimsString = strings.Join(sortedClaims, ",")
 
 		if oldUI, ok := uniqClaims[claimsString]; ok {
-			return nil, fmt.Errorf("duplicate match claims=%q found for name=%q at idx=%d; the previous one is set for name=%q", claimsString, ui.Name, idx, oldUI.Name)
+			return nil, nil, fmt.Errorf("duplicate match claims=%q found for name=%q at idx=%d; the previous one is set for name=%q", claimsString, ui.Name, idx, oldUI.Name)
 		}
 		uniqClaims[claimsString] = &ui
 		if len(jwtToken.PublicKeys) > 0 || len(jwtToken.PublicKeyFiles) > 0 {
@@ -116,7 +115,7 @@ func parseJWTUsers(ac *AuthConfig, oidcDP *oidcDiscovererPool) ([]*UserInfo, err
 			for i := range jwtToken.PublicKeys {
 				k, err := jwt.ParseKey([]byte(jwtToken.PublicKeys[i]))
 				if err != nil {
-					return nil, err
+					return nil, nil, err
 				}
 				keys = append(keys, k)
 			}
@@ -124,52 +123,52 @@ func parseJWTUsers(ac *AuthConfig, oidcDP *oidcDiscovererPool) ([]*UserInfo, err
 			for _, filePath := range jwtToken.PublicKeyFiles {
 				keyData, err := os.ReadFile(filePath)
 				if err != nil {
-					return nil, fmt.Errorf("cannot read public key from file %q: %w", filePath, err)
+					return nil, nil, fmt.Errorf("cannot read public key from file %q: %w", filePath, err)
 				}
 				k, err := jwt.ParseKey(keyData)
 				if err != nil {
-					return nil, fmt.Errorf("cannot parse public key from file %q: %w", filePath, err)
+					return nil, nil, fmt.Errorf("cannot parse public key from file %q: %w", filePath, err)
 				}
 				keys = append(keys, k)
 			}
 
 			vp, err := jwt.NewVerifierPool(keys)
 			if err != nil {
-				return nil, err
+				return nil, nil, err
 			}
 
 			jwtToken.verifierPool.Store(vp)
 		}
 		if jwtToken.OIDC != nil {
 			if len(jwtToken.PublicKeys) > 0 || len(jwtToken.PublicKeyFiles) > 0 || jwtToken.SkipVerify {
-				return nil, fmt.Errorf("jwt with oidc cannot contain public keys or have skip_verify=true")
+				return nil, nil, fmt.Errorf("jwt with oidc cannot contain public keys or have skip_verify=true")
 			}
 
 			if jwtToken.OIDC.Issuer == "" {
-				return nil, fmt.Errorf("oidc issuer cannot be empty")
+				return nil, nil, fmt.Errorf("oidc issuer cannot be empty")
 			}
 			isserURL, err := url.Parse(jwtToken.OIDC.Issuer)
 			if err != nil {
-				return nil, fmt.Errorf("oidc issuer %q must be a valid URL", jwtToken.OIDC.Issuer)
+				return nil, nil, fmt.Errorf("oidc issuer %q must be a valid URL", jwtToken.OIDC.Issuer)
 			}
 			if isserURL.Scheme != "https" && isserURL.Scheme != "http" {
-				return nil, fmt.Errorf("oidc issuer %q must have http or https scheme", jwtToken.OIDC.Issuer)
+				return nil, nil, fmt.Errorf("oidc issuer %q must have http or https scheme", jwtToken.OIDC.Issuer)
 			}
 
 			oidcDP.createOrAdd(ui.JWT.OIDC.Issuer, &ui.JWT.verifierPool)
 		}
 
 		if err := parseJWTPlaceholdersForUserInfo(&ui, true); err != nil {
-			return nil, err
+			return nil, nil, err
 		}
 
 		if err := ui.initURLs(); err != nil {
-			return nil, err
+			return nil, nil, err
 		}
 
 		metricLabels, err := ui.getMetricLabels()
 		if err != nil {
-			return nil, fmt.Errorf("cannot parse metric_labels: %w", err)
+			return nil, nil, fmt.Errorf("cannot parse metric_labels: %w", err)
 		}
 		ui.requests = ac.ms.GetOrCreateCounter(`vmauth_user_requests_total` + metricLabels)
 		ui.requestErrors = ac.ms.GetOrCreateCounter(`vmauth_user_request_errors_total` + metricLabels)
@@ -188,7 +187,7 @@ func parseJWTUsers(ac *AuthConfig, oidcDP *oidcDiscovererPool) ([]*UserInfo, err
 
 		rt, err := newRoundTripper(ui.TLSCAFile, ui.TLSCertFile, ui.TLSKeyFile, ui.TLSServerName, ui.TLSInsecureSkipVerify)
 		if err != nil {
-			return nil, fmt.Errorf("cannot initialize HTTP RoundTripper: %w", err)
+			return nil, nil, fmt.Errorf("cannot initialize HTTP RoundTripper: %w", err)
 		}
 		ui.rt = rt
 
@@ -201,7 +200,7 @@ func parseJWTUsers(ac *AuthConfig, oidcDP *oidcDiscovererPool) ([]*UserInfo, err
 		return len(jui[i].JWT.MatchClaims) > len(jui[j].JWT.MatchClaims)
 	})
 
-	return jui, nil
+	return jui, oidcDP, nil
 }
 
 var tokenPool sync.Pool
@@ -434,6 +433,7 @@ func validateJWTPlaceholdersForURL(up *URLPrefix, isAllowed bool) error {
 			}
 			if strings.Contains(p, placeholderPrefix) {
 				return fmt.Errorf("invalid placeholder found in URL request path: %q, supported values are: %s", bu.Path, strings.Join(allPlaceholders, ", "))
+
 			}
 		}
 		for param, values := range bu.Query() {
@@ -488,6 +488,7 @@ func hasAnyPlaceholders(u *url.URL) bool {
 				return true
 			}
 		}
+
 	}
 	return false
 }

app/vmauth/jwt_test.go

@@ -39,14 +39,16 @@ XOtclIk1uhc03oL9nOQ=
 			}
 			return
 		}
-		oidcDP := &oidcDiscovererPool{}
-		users, err := parseJWTUsers(ac, oidcDP)
+		users, oidcDP, err := parseJWTUsers(ac)
 		if err == nil {
 			t.Fatalf("expecting non-nil error; got %v", users)
 		}
 		if expErr != err.Error() {
 			t.Fatalf("unexpected error; got\n%q\nwant \n%q", err.Error(), expErr)
 		}
+		if oidcDP != nil {
+			t.Fatalf("expecting nil oidcDP; got %v", oidcDP)
+		}
 	}
 
 	// unauthorized_user cannot be used with jwt
@@ -324,8 +326,7 @@ XOtclIk1uhc03oL9nOQ=
 			t.Fatalf("unexpected error: %s", err)
 		}
 
-		oidcDP := &oidcDiscovererPool{}
-		jui, err := parseJWTUsers(ac, oidcDP)
+		jui, oidcDP, err := parseJWTUsers(ac)
 		if err != nil {
 			t.Fatalf("unexpected error: %s", err)
 		}

app/vmauth/main.go

@@ -6,7 +6,6 @@ import (
 	"flag"
 	"fmt"
 	"io"
-	"math/rand/v2"
 	"net"
 	"net/http"
 	"net/textproto"
@@ -32,7 +31,6 @@ import (
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/procutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/promauth"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/pushmetrics"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/timerpool"
 )
 
 var (
@@ -175,12 +173,11 @@ func requestHandler(w http.ResponseWriter, r *http.Request) bool {
 	if len(ats) == 0 {
 		// Process requests for unauthorized users
 		ui := authConfig.Load().UnauthorizedUser
-		if ui.hasAnyURLs() {
+		if ui != nil {
 			processUserRequest(w, r, ui, nil)
 			return true
 		}
 
-		ui.logRequest(r, `unauthorized`, http.StatusUnauthorized, 0)
 		handleMissingAuthorizationError(w)
 		return true
 	}
@@ -194,23 +191,17 @@ func requestHandler(w http.ResponseWriter, r *http.Request) bool {
 			logger.Panicf("BUG: unexpected nil jwt token for user %q", ui.name())
 		}
 		defer putToken(tkn)
-		// Call processUserRequest only if the token contains the vm_access claim
-		// or a default claim is configured; otherwise fall through to unauthorized_user.
-		if tkn.HasVMAccessClaim() || ui.JWT.DefaultVMAccessClaim != nil {
-			processUserRequest(w, r, ui, tkn)
-			return true
-		}
+		processUserRequest(w, r, ui, tkn)
+		return true
 	}
 
 	uu := authConfig.Load().UnauthorizedUser
-	if uu.hasAnyURLs() {
+	if uu != nil {
 		processUserRequest(w, r, uu, nil)
 		return true
 	}
 
 	invalidAuthTokenRequests.Inc()
-	slowdownUnauthorizedResponse(r)
-	uu.logRequest(r, `unauthorized`, http.StatusUnauthorized, 0)
 	if *logInvalidAuthTokens {
 		err := fmt.Errorf("cannot authorize request with auth tokens %q", ats)
 		err = &httpserver.ErrorWithStatusCode{
@@ -386,7 +377,7 @@ func bufferRequestBody(ctx context.Context, r io.ReadCloser, userName string) (i
 			return nil, &httpserver.ErrorWithStatusCode{
 				Err: fmt.Errorf("reject request from the user %s because the request body couldn't be read in -maxQueueDuration=%s; read %d bytes in %s",
 					userName, *maxQueueDuration, len(buf), d.Truncate(time.Second)),
-				StatusCode: http.StatusRequestTimeout,
+				StatusCode: http.StatusBadRequest,
 			}
 		}
 
@@ -433,12 +424,8 @@ func processRequest(w http.ResponseWriter, r *http.Request, ui *UserInfo, tkn *j
 		}
 		targetURL := bu.url
 		if tkn != nil {
-			vmac := tkn.VMAccess()
-			if !tkn.HasVMAccessClaim() {
-				vmac = ui.JWT.DefaultVMAccessClaim
-			}
 			// for security reasons allow templating only for configured url values and headers
-			targetURL, hc = replaceJWTPlaceholders(bu, hc, vmac)
+			targetURL, hc = replaceJWTPlaceholders(bu, hc, tkn.VMAccess())
 		}
 		if isDefault {
 			// Don't change path and add request_path query param for default route.
@@ -894,20 +881,3 @@ func debugInfo(u *url.URL, r *http.Request) string {
 	fmt.Fprint(s, ")")
 	return s.String()
 }
-
-// slowdownUnauthorizedResponse adds a random delay in the [2..3] seconds range before returning an unauthorized response.
-// This reduces the effectiveness of brute-force.
-//
-// Recommended by OWASP Top10:
-// https://owasp.org/Top10/2025/A07_2025-Authentication_Failures
-func slowdownUnauthorizedResponse(r *http.Request) {
-
-	d := 2*time.Second + time.Duration(rand.IntN(1000))*time.Millisecond
-	t := timerpool.Get(d)
-
-	select {
-	case <-t.C:
-	case <-r.Context().Done():
-	}
-	timerpool.Put(t)
-}

app/vmauth/main_synctest_test.go

@@ -1,54 +0,0 @@
-//go:build synctest
-
-package main
-
-import (
-	"context"
-	"net/http"
-	"testing"
-	"testing/synctest"
-	"time"
-
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
-)
-
-func TestBufferRequestBody_Timeout(t *testing.T) {
-	synctest.Test(t, func(t *testing.T) {
-
-		defaultMaxQueueDuration := *maxQueueDuration
-		defer func() {
-			*maxQueueDuration = defaultMaxQueueDuration
-		}()
-
-		*maxQueueDuration = 100 * time.Millisecond
-
-		ctx, cancel := context.WithTimeout(context.Background(), *maxQueueDuration)
-		defer cancel()
-
-		_, err := bufferRequestBody(ctx, &timeoutBody{delay: *maxQueueDuration + 100*time.Millisecond}, "foo")
-		if err == nil {
-			t.Fatalf("expecting non-nil error")
-		}
-
-		esc, ok := err.(*httpserver.ErrorWithStatusCode)
-		if !ok {
-			t.Fatalf("unexpected error type: %s", err)
-		}
-		if esc.StatusCode != http.StatusRequestTimeout {
-			t.Fatalf("read request body timeout meet unexpected status code; got %d; want %d", esc.StatusCode, http.StatusRequestTimeout)
-		}
-	})
-}
-
-type timeoutBody struct {
-	delay time.Duration
-}
-
-func (r *timeoutBody) Read(_ []byte) (int, error) {
-	time.Sleep(r.delay)
-	return 0, context.DeadlineExceeded
-}
-
-func (r *timeoutBody) Close() error {
-	return nil
-}

app/vmauth/main_test.go

@@ -739,12 +739,6 @@ users:
 		"vm_access": map[string]any{},
 	}, false)
 
-	// token without vm_access claim, but with a custom claim usable for routing
-	roleToken := genToken(t, map[string]any{
-		"exp":  time.Now().Add(10 * time.Minute).Unix(),
-		"role": "admin",
-	}, true)
-
 	fullToken := genToken(t, map[string]any{
 		"exp": time.Now().Add(10 * time.Minute).Unix(),
 		"vm_access": map[string]any{
@@ -785,45 +779,6 @@ statusCode=401
 Unauthorized`
 	f(simpleCfgStr, request, responseExpected)
 
-	// token without vm_access claim should fall through to unauthorized_user
-	request = httptest.NewRequest(`GET`, "http://some-host.com/abc", nil)
-	request.Header.Set(`Authorization`, `Bearer `+noVMAccessClaimToken)
-	responseExpected = `
-statusCode=200
-path: /bar/abc
-query:
-headers:`
-	f(fmt.Sprintf(`
-unauthorized_user:
-  url_prefix: {BACKEND}/bar
-users:
-- jwt:
-    public_keys:
-    - %q
-    match_claims:
-      role: admin
-  url_prefix: {BACKEND}/foo`, string(publicKeyPEM)), request, responseExpected)
-
-	// token without vm_access claim is accepted when default_vm_access_claim configured
-	request = httptest.NewRequest(`GET`, "http://some-host.com/abc", nil)
-	request.Header.Set(`Authorization`, `Bearer `+roleToken)
-	responseExpected = `
-statusCode=200
-path: /foo/abc
-query:
-headers:`
-	f(fmt.Sprintf(`
-users:
-- jwt:
-    public_keys:
-    - %q
-    default_vm_access_claim:
-      metrics_account_id: 10
-      metrics_project_id: 10
-    match_claims:
-      role: admin
-  url_prefix: {BACKEND}/foo`, string(publicKeyPEM)), request, responseExpected)
-
 	// expired token
 	request = httptest.NewRequest(`GET`, "http://some-host.com/abc", nil)
 	request.Header.Set(`Authorization`, `Bearer `+expiredToken)
@@ -1684,7 +1639,7 @@ func (w *fakeResponseWriter) WriteHeader(statusCode int) {
 		"X-Content-Type-Options": true,
 	})
 	if err != nil {
-		panic(fmt.Errorf("cannot marshal headers: %w", err))
+		panic(fmt.Errorf("cannot marshal headers: %s", err))
 	}
 }
 

app/vmauth/oidc.go

@@ -161,7 +161,7 @@ func fetchAndParseJWKs(ctx context.Context, jwksURI string) (*jwt.VerifierPool,
 
 	vp, err := jwt.ParseJWKs(b)
 	if err != nil {
-		return nil, fmt.Errorf("failed to parse jwks keys from %q: %w", jwksURI, err)
+		return nil, fmt.Errorf("failed to parse jwks keys from %q: %v", jwksURI, err)
 	}
 
 	return vp, nil
@@ -188,7 +188,7 @@ func getOpenIDConfiguration(ctx context.Context, issuer string) (openidConfig, e
 
 	var cfg openidConfig
 	if err := json.NewDecoder(resp.Body).Decode(&cfg); err != nil {
-		return openidConfig{}, fmt.Errorf("failed to decode openid config from %q: %w", configURL, err)
+		return openidConfig{}, fmt.Errorf("failed to decode openid config from %q: %s", configURL, err)
 	}
 
 	return cfg, nil

app/vmctl/README.md

@@ -1,3 +1,3 @@
 See vmctl docs [here](https://docs.victoriametrics.com/victoriametrics/vmctl/).
 
-vmctl docs can be edited at [docs/vmctl.md](https://github.com/VictoriaMetrics/VictoriaMetrics/blob/master/docs/victoriametrics/vmctl/vmctl.md).
+vmctl docs can be edited at [docs/vmctl.md](https://github.com/VictoriaMetrics/VictoriaMetrics/blob/master/docs/victoriametrics/vmctl.md).

app/vmctl/auth/auth.go

@@ -131,13 +131,16 @@ func (ac *authContext) initFromBasicAuthConfig(ba *BasicAuthConfig) error {
 	if ba.Username == "" {
 		return fmt.Errorf("missing `username` in `basic_auth` section")
 	}
-	ac.getAuthHeader = func() string {
-		// See https://en.wikipedia.org/wiki/Basic_access_authentication
-		token := ba.Username + ":" + ba.Password
-		token64 := base64.StdEncoding.EncodeToString([]byte(token))
-		return "Basic " + token64
+	if ba.Password != "" {
+		ac.getAuthHeader = func() string {
+			// See https://en.wikipedia.org/wiki/Basic_access_authentication
+			token := ba.Username + ":" + ba.Password
+			token64 := base64.StdEncoding.EncodeToString([]byte(token))
+			return "Basic " + token64
+		}
+		ac.authDigest = fmt.Sprintf("basic(username=%q, password=%q)", ba.Username, ba.Password)
+		return nil
 	}
-	ac.authDigest = fmt.Sprintf("basic(username=%q, password=%q)", ba.Username, ba.Password)
 	return nil
 }
 

app/vmctl/flags.go

@@ -69,8 +69,6 @@ const (
 	vmAddr               = "vm-addr"
 	vmUser               = "vm-user"
 	vmPassword           = "vm-password"
-	vmHeaders            = "vm-headers"
-	vmBearerToken        = "vm-bearer-token"
 	vmAccountID          = "vm-account-id"
 	vmConcurrency        = "vm-concurrency"
 	vmCompress           = "vm-compress"
@@ -114,16 +112,6 @@ var (
 			Usage:   "VictoriaMetrics password for basic auth",
 			EnvVars: []string{"VM_PASSWORD"},
 		},
-		&cli.StringFlag{
-			Name: vmHeaders,
-			Usage: "Optional HTTP headers to send with each request to the corresponding destination address. \n" +
-				"For example, --vm-headers='My-Auth:foobar' would send 'My-Auth: foobar' HTTP header with every request to the corresponding destination address. \n" +
-				"Multiple headers must be delimited by '^^': --vm-headers='header1:value1^^header2:value2'",
-		},
-		&cli.StringFlag{
-			Name:  vmBearerToken,
-			Usage: "Optional bearer auth token to use for the corresponding --vm-addr",
-		},
 		&cli.StringFlag{
 			Name: vmAccountID,
 			Usage: "AccountID is an arbitrary 32-bit integer identifying namespace for data ingestion (aka tenant). \n" +

app/vmctl/influx.go

@@ -43,7 +43,7 @@ func newInfluxProcessor(ic *influx.Client, im *vm.Importer, cc int, separator st
 func (ip *influxProcessor) run(ctx context.Context) error {
 	series, err := ip.ic.Explore()
 	if err != nil {
-		return fmt.Errorf("explore query failed: %w", err)
+		return fmt.Errorf("explore query failed: %s", err)
 	}
 	if len(series) < 1 {
 		return fmt.Errorf("found no timeseries to import")
@@ -71,7 +71,7 @@ func (ip *influxProcessor) run(ctx context.Context) error {
 			for s := range seriesCh {
 				if err := ip.do(s); err != nil {
 					influxErrorsTotal.Inc()
-					errCh <- fmt.Errorf("request failed for %q.%q: %w", s.Measurement, s.Field, err)
+					errCh <- fmt.Errorf("request failed for %q.%q: %s", s.Measurement, s.Field, err)
 					return
 				}
 				influxSeriesProcessed.Inc()
@@ -84,10 +84,10 @@ func (ip *influxProcessor) run(ctx context.Context) error {
 	for _, s := range series {
 		select {
 		case infErr := <-errCh:
-			return fmt.Errorf("influx error: %w", infErr)
+			return fmt.Errorf("influx error: %s", infErr)
 		case vmErr := <-ip.im.Errors():
 			influxErrorsTotal.Inc()
-			return fmt.Errorf("import process failed: %w", wrapErr(vmErr, ip.isVerbose))
+			return fmt.Errorf("import process failed: %s", wrapErr(vmErr, ip.isVerbose))
 		case seriesCh <- s:
 		}
 	}
@@ -100,11 +100,11 @@ func (ip *influxProcessor) run(ctx context.Context) error {
 	for vmErr := range ip.im.Errors() {
 		if vmErr.Err != nil {
 			influxErrorsTotal.Inc()
-			return fmt.Errorf("import process failed: %w", wrapErr(vmErr, ip.isVerbose))
+			return fmt.Errorf("import process failed: %s", wrapErr(vmErr, ip.isVerbose))
 		}
 	}
 	for err := range errCh {
-		return fmt.Errorf("import process failed: %w", err)
+		return fmt.Errorf("import process failed: %s", err)
 	}
 
 	log.Println("Import finished!")
@@ -119,7 +119,7 @@ const valueField = "value"
 func (ip *influxProcessor) do(s *influx.Series) error {
 	cr, err := ip.ic.FetchDataPoints(s)
 	if err != nil {
-		return fmt.Errorf("failed to fetch datapoints: %w", err)
+		return fmt.Errorf("failed to fetch datapoints: %s", err)
 	}
 	defer func() {
 		_ = cr.Close()

app/vmctl/influx/influx.go

@@ -96,10 +96,10 @@ func NewClient(cfg Config) (*Client, error) {
 	}
 	hc, err := influx.NewHTTPClient(c)
 	if err != nil {
-		return nil, fmt.Errorf("failed to establish conn: %w", err)
+		return nil, fmt.Errorf("failed to establish conn: %s", err)
 	}
 	if _, _, err := hc.Ping(time.Second); err != nil {
-		return nil, fmt.Errorf("ping failed: %w", err)
+		return nil, fmt.Errorf("ping failed: %s", err)
 	}
 
 	chunkSize := cfg.ChunkSize
@@ -155,7 +155,7 @@ func (c *Client) Explore() ([]*Series, error) {
 	// {"measurement1": ["value1", "value2"]}
 	mFields, err := c.fieldsByMeasurement()
 	if err != nil {
-		return nil, fmt.Errorf("failed to get field keys: %w", err)
+		return nil, fmt.Errorf("failed to get field keys: %s", err)
 	}
 
 	if len(mFields) < 1 {
@@ -165,12 +165,12 @@ func (c *Client) Explore() ([]*Series, error) {
 	// {"measurement1": {"tag1", "tag2"}}
 	measurementTags, err := c.getMeasurementTags()
 	if err != nil {
-		return nil, fmt.Errorf("failed to get tags of measurements: %w", err)
+		return nil, fmt.Errorf("failed to get tags of measurements: %s", err)
 	}
 
 	series, err := c.getSeries()
 	if err != nil {
-		return nil, fmt.Errorf("failed to get series: %w", err)
+		return nil, fmt.Errorf("failed to get series: %s", err)
 	}
 
 	var iSeries []*Series
@@ -237,7 +237,7 @@ func (cr *ChunkedResponse) Next() ([]int64, []float64, error) {
 		return nil, nil, err
 	}
 	if resp.Error() != nil {
-		return nil, nil, fmt.Errorf("response error for %s: %w", cr.iq.Command, resp.Error())
+		return nil, nil, fmt.Errorf("response error for %s: %s", cr.iq.Command, resp.Error())
 	}
 	if len(resp.Results) != 1 {
 		return nil, nil, fmt.Errorf("unexpected number of results in response: %d", len(resp.Results))
@@ -259,13 +259,14 @@ func (cr *ChunkedResponse) Next() ([]int64, []float64, error) {
 
 	fieldValues, ok := r.values[cr.field]
 	if !ok {
-		return nil, nil, fmt.Errorf("response doesn't contain field %q", cr.field)
+		return nil, nil, fmt.Errorf("response doesn't contain filed %q", cr.field)
 	}
 	values := make([]float64, len(fieldValues))
 	for i, fv := range fieldValues {
 		v, err := toFloat64(fv)
 		if err != nil {
-			return nil, nil, fmt.Errorf("failed to convert value %q.%v to float64: %w", cr.field, v, err)
+			return nil, nil, fmt.Errorf("failed to convert value %q.%v to float64: %s",
+				cr.field, v, err)
 		}
 		values[i] = v
 	}
@@ -293,7 +294,7 @@ func (c *Client) FetchDataPoints(s *Series) (*ChunkedResponse, error) {
 	}
 	cr, err := c.QueryAsChunk(iq)
 	if err != nil {
-		return nil, fmt.Errorf("query %q err: %w", iq.Command, err)
+		return nil, fmt.Errorf("query %q err: %s", iq.Command, err)
 	}
 	return &ChunkedResponse{cr, iq, s.Field}, nil
 }
@@ -307,7 +308,7 @@ func (c *Client) fieldsByMeasurement() (map[string][]string, error) {
 	log.Printf("fetching fields: %s", stringify(q))
 	qValues, err := c.do(q)
 	if err != nil {
-		return nil, fmt.Errorf("error while executing query %q: %w", q.Command, err)
+		return nil, fmt.Errorf("error while executing query %q: %s", q.Command, err)
 	}
 
 	var total int
@@ -351,7 +352,7 @@ func (c *Client) getSeries() ([]*Series, error) {
 	log.Printf("fetching series: %s", stringify(q))
 	cr, err := c.QueryAsChunk(q)
 	if err != nil {
-		return nil, fmt.Errorf("error while executing query %q: %w", q.Command, err)
+		return nil, fmt.Errorf("error while executing query %q: %s", q.Command, err)
 	}
 
 	const key = "key"
@@ -365,7 +366,7 @@ func (c *Client) getSeries() ([]*Series, error) {
 			return nil, err
 		}
 		if resp.Error() != nil {
-			return nil, fmt.Errorf("response error for query %q: %w", q.Command, resp.Error())
+			return nil, fmt.Errorf("response error for query %q: %s", q.Command, resp.Error())
 		}
 		qValues, err := parseResult(resp.Results[0])
 		if err != nil {
@@ -416,7 +417,7 @@ func (c *Client) getMeasurementTags() (map[string]map[string]struct{}, error) {
 	log.Printf("fetching tag keys: %s", stringify(q))
 	cr, err := c.QueryAsChunk(q)
 	if err != nil {
-		return nil, fmt.Errorf("error while executing query %q: %w", q.Command, err)
+		return nil, fmt.Errorf("error while executing query %q: %s", q.Command, err)
 	}
 
 	const tagKey = "tagKey"
@@ -431,7 +432,7 @@ func (c *Client) getMeasurementTags() (map[string]map[string]struct{}, error) {
 			return nil, err
 		}
 		if resp.Error() != nil {
-			return nil, fmt.Errorf("response error for query %q: %w", q.Command, resp.Error())
+			return nil, fmt.Errorf("response error for query %q: %s", q.Command, resp.Error())
 		}
 		qValues, err := parseResult(resp.Results[0])
 		if err != nil {
@@ -454,10 +455,10 @@ func (c *Client) getMeasurementTags() (map[string]map[string]struct{}, error) {
 func (c *Client) do(q influx.Query) ([]queryValues, error) {
 	res, err := c.Query(q)
 	if err != nil {
-		return nil, fmt.Errorf("query error: %w", err)
+		return nil, fmt.Errorf("query error: %s", err)
 	}
 	if res.Error() != nil {
-		return nil, fmt.Errorf("response error: %w", res.Error())
+		return nil, fmt.Errorf("response error: %s", res.Error())
 	}
 	if len(res.Results) < 1 {
 		return nil, fmt.Errorf("query returned 0 results")

app/vmctl/influx/parser.go

@@ -71,7 +71,7 @@ func toFloat64(v any) (float64, error) {
 func parseDate(dateStr string) (int64, error) {
 	startTime, err := time.Parse(time.RFC3339, dateStr)
 	if err != nil {
-		return 0, fmt.Errorf("cannot parse %q: %w", dateStr, err)
+		return 0, fmt.Errorf("cannot parse %q: %s", dateStr, err)
 	}
 	return startTime.UnixNano() / 1e6, nil
 }
@@ -92,7 +92,7 @@ func (s *Series) unmarshal(v string) error {
 	var err error
 	s.LabelPairs, err = unmarshalTags(v[n+1:], noEscapeChars)
 	if err != nil {
-		return fmt.Errorf("failed to unmarhsal tags: %w", err)
+		return fmt.Errorf("failed to unmarhsal tags: %s", err)
 	}
 	return nil
 }

app/vmctl/main.go

@@ -88,7 +88,7 @@ func main() {
 
 					tr, err := promauth.NewTLSTransport(certFile, keyFile, caFile, serverName, insecureSkipVerify, "vmctl_opentsdb")
 					if err != nil {
-						return fmt.Errorf("failed to create transport for -%s=%q: %w", otsdbAddr, addr, err)
+						return fmt.Errorf("failed to create transport for -%s=%q: %s", otsdbAddr, addr, err)
 					}
 					oCfg := opentsdb.Config{
 						Addr:       addr,
@@ -103,17 +103,17 @@ func main() {
 					}
 					otsdbClient, err := opentsdb.NewClient(oCfg)
 					if err != nil {
-						return fmt.Errorf("failed to create opentsdb client: %w", err)
+						return fmt.Errorf("failed to create opentsdb client: %s", err)
 					}
 
 					vmCfg, err := initConfigVM(c)
 					if err != nil {
-						return fmt.Errorf("failed to init VM configuration: %w", err)
+						return fmt.Errorf("failed to init VM configuration: %s", err)
 					}
 
 					importer, err := vm.NewImporter(ctx, vmCfg)
 					if err != nil {
-						return fmt.Errorf("failed to create VM importer: %w", err)
+						return fmt.Errorf("failed to create VM importer: %s", err)
 					}
 
 					otsdbProcessor := newOtsdbProcessor(otsdbClient, importer, c.Int(otsdbConcurrency), c.Bool(globalVerbose))
@@ -137,7 +137,7 @@ func main() {
 
 					tc, err := promauth.NewTLSConfig(certFile, keyFile, caFile, serverName, insecureSkipVerify)
 					if err != nil {
-						return fmt.Errorf("failed to create TLS Config: %w", err)
+						return fmt.Errorf("failed to create TLS Config: %s", err)
 					}
 
 					iCfg := influx.Config{
@@ -157,17 +157,17 @@ func main() {
 
 					influxClient, err := influx.NewClient(iCfg)
 					if err != nil {
-						return fmt.Errorf("failed to create influx client: %w", err)
+						return fmt.Errorf("failed to create influx client: %s", err)
 					}
 
 					vmCfg, err := initConfigVM(c)
 					if err != nil {
-						return fmt.Errorf("failed to init VM configuration: %w", err)
+						return fmt.Errorf("failed to init VM configuration: %s", err)
 					}
 
 					importer, err = vm.NewImporter(ctx, vmCfg)
 					if err != nil {
-						return fmt.Errorf("failed to create VM importer: %w", err)
+						return fmt.Errorf("failed to create VM importer: %s", err)
 					}
 
 					processor := newInfluxProcessor(
@@ -203,7 +203,7 @@ func main() {
 
 					tr, err := promauth.NewTLSTransport(certFile, keyFile, caFile, serverName, insecureSkipVerify, "vmctl_remoteread")
 					if err != nil {
-						return fmt.Errorf("failed to create transport for -%s=%q: %w", remoteReadSrcAddr, addr, err)
+						return fmt.Errorf("failed to create transport for -%s=%q: %s", remoteReadSrcAddr, addr, err)
 					}
 
 					// Backwards compatible default values if none provided by user
@@ -227,17 +227,17 @@ func main() {
 						DisablePathAppend: c.Bool(remoteReadDisablePathAppend),
 					})
 					if err != nil {
-						return fmt.Errorf("error create remote read client: %w", err)
+						return fmt.Errorf("error create remote read client: %s", err)
 					}
 
 					vmCfg, err := initConfigVM(c)
 					if err != nil {
-						return fmt.Errorf("failed to init VM configuration: %w", err)
+						return fmt.Errorf("failed to init VM configuration: %s", err)
 					}
 
 					importer, err := vm.NewImporter(ctx, vmCfg)
 					if err != nil {
-						return fmt.Errorf("failed to create VM importer: %w", err)
+						return fmt.Errorf("failed to create VM importer: %s", err)
 					}
 
 					rmp := remoteReadProcessor{
@@ -265,12 +265,12 @@ func main() {
 
 					vmCfg, err := initConfigVM(c)
 					if err != nil {
-						return fmt.Errorf("failed to init VM configuration: %w", err)
+						return fmt.Errorf("failed to init VM configuration: %s", err)
 					}
 
 					importer, err = vm.NewImporter(ctx, vmCfg)
 					if err != nil {
-						return fmt.Errorf("failed to create VM importer: %w", err)
+						return fmt.Errorf("failed to create VM importer: %s", err)
 					}
 
 					promCfg := prometheus.Config{
@@ -285,7 +285,7 @@ func main() {
 					}
 					cl, err := prometheus.NewClient(promCfg)
 					if err != nil {
-						return fmt.Errorf("failed to create prometheus client: %w", err)
+						return fmt.Errorf("failed to create prometheus client: %s", err)
 					}
 
 					pp := prometheusProcessor{
@@ -307,12 +307,12 @@ func main() {
 
 					vmCfg, err := initConfigVM(c)
 					if err != nil {
-						return fmt.Errorf("failed to init VM configuration: %w", err)
+						return fmt.Errorf("failed to init VM configuration: %s", err)
 					}
 
 					importer, err = vm.NewImporter(ctx, vmCfg)
 					if err != nil {
-						return fmt.Errorf("failed to create VM importer: %w", err)
+						return fmt.Errorf("failed to create VM importer: %s", err)
 					}
 
 					mCfg := mimir.Config{
@@ -335,7 +335,7 @@ func main() {
 					}
 					cl, err := mimir.NewClient(ctx, mCfg)
 					if err != nil {
-						return fmt.Errorf("failed to create mimir client: %w", err)
+						return fmt.Errorf("failed to create mimir client: %s", err)
 					}
 
 					pp := prometheusProcessor{
@@ -356,12 +356,12 @@ func main() {
 					fmt.Println("Thanos import mode")
 					vmCfg, err := initConfigVM(c)
 					if err != nil {
-						return fmt.Errorf("failed to init VM configuration: %w", err)
+						return fmt.Errorf("failed to init VM configuration: %s", err)
 					}
 
 					importer, err = vm.NewImporter(ctx, vmCfg)
 					if err != nil {
-						return fmt.Errorf("failed to create VM importer: %w", err)
+						return fmt.Errorf("failed to create VM importer: %s", err)
 					}
 					thanosCfg := thanos.Config{
 						Snapshot: c.String(thanosSnapshot),
@@ -374,7 +374,7 @@ func main() {
 					}
 					cl, err := thanos.NewClient(thanosCfg)
 					if err != nil {
-						return fmt.Errorf("failed to create thanos client: %w", err)
+						return fmt.Errorf("failed to create thanos client: %s", err)
 					}
 
 					var aggrTypes []thanos.AggrType
@@ -382,7 +382,7 @@ func main() {
 						for _, typeStr := range aggrTypesStr {
 							aggrType, err := thanos.ParseAggrType(typeStr)
 							if err != nil {
-								return fmt.Errorf("failed to parse aggregate type %q: %w", typeStr, err)
+								return fmt.Errorf("failed to parse aggregate type %q: %s", typeStr, err)
 							}
 							aggrTypes = append(aggrTypes, aggrType)
 						}
@@ -415,7 +415,7 @@ func main() {
 					bfMinDuration := c.Duration(vmNativeBackoffMinDuration)
 					bf, err := backoff.New(bfRetries, bfFactor, bfMinDuration)
 					if err != nil {
-						return fmt.Errorf("failed to create backoff object: %w", err)
+						return fmt.Errorf("failed to create backoff object: %s", err)
 					}
 
 					disableKeepAlive := c.Bool(vmNativeDisableHTTPKeepAlive)
@@ -439,7 +439,7 @@ func main() {
 
 					srcTC, err := promauth.NewTLSConfig(srcCertFile, srcKeyFile, srcCAFile, srcServerName, srcInsecureSkipVerify)
 					if err != nil {
-						return fmt.Errorf("failed to create TLS Config: %w", err)
+						return fmt.Errorf("failed to create TLS Config: %s", err)
 					}
 
 					trSrc := httputil.NewTransport(false, "vmctl_src")
@@ -457,7 +457,7 @@ func main() {
 						auth.WithBearer(c.String(vmNativeDstBearerToken)),
 						auth.WithHeaders(c.String(vmNativeDstHeaders)))
 					if err != nil {
-						return fmt.Errorf("error initialize auth config for destination: %s: %w", dstAddr, err)
+						return fmt.Errorf("error initialize auth config for destination: %s", dstAddr)
 					}
 
 					// create TLS config
@@ -469,7 +469,7 @@ func main() {
 
 					dstTC, err := promauth.NewTLSConfig(dstCertFile, dstKeyFile, dstCAFile, dstServerName, dstInsecureSkipVerify)
 					if err != nil {
-						return fmt.Errorf("failed to create TLS Config: %w", err)
+						return fmt.Errorf("failed to create TLS Config: %s", err)
 					}
 
 					trDst := httputil.NewTransport(false, "vmctl_dst")
@@ -534,7 +534,7 @@ func main() {
 					log.Printf("verifying block at path=%q", blockPath)
 					f, err := os.OpenFile(blockPath, os.O_RDONLY, 0600)
 					if err != nil {
-						return cli.Exit(fmt.Errorf("cannot open exported block at path=%q: %w", blockPath, err), 1)
+						return cli.Exit(fmt.Errorf("cannot open exported block at path=%q err=%w", blockPath, err), 1)
 					}
 					defer f.Close()
 					var blocksCount atomic.Uint64
@@ -542,7 +542,7 @@ func main() {
 						blocksCount.Add(1)
 						return nil
 					}); err != nil {
-						return cli.Exit(fmt.Errorf("cannot parse block at path=%q, blocksCount=%d: %w", blockPath, blocksCount.Load(), err), 1)
+						return cli.Exit(fmt.Errorf("cannot parse block at path=%q, blocksCount=%d, err=%w", blockPath, blocksCount.Load(), err), 1)
 					}
 					log.Printf("successfully verified block at path=%q, blockCount=%d", blockPath, blocksCount.Load())
 					return nil
@@ -563,11 +563,11 @@ func main() {
 	}()
 
 	err = app.Run(os.Args)
-	pushmetrics.StopAndPush()
 	if err != nil {
 		log.Fatalln(err)
 	}
 	log.Printf("Total time: %v", time.Since(start))
+	pushmetrics.StopAndPush()
 }
 
 func initConfigVM(c *cli.Context) (vm.Config, error) {
@@ -585,7 +585,7 @@ func initConfigVM(c *cli.Context) (vm.Config, error) {
 
 	tr, err := promauth.NewTLSTransport(certFile, keyFile, caFile, serverName, insecureSkipVerify, "vmctl_client")
 	if err != nil {
-		return vm.Config{}, fmt.Errorf("failed to create transport for -%s=%q: %w", vmAddr, addr, err)
+		return vm.Config{}, fmt.Errorf("failed to create transport for -%s=%q: %s", vmAddr, addr, err)
 	}
 
 	bfRetries := c.Int(vmBackoffRetries)
@@ -593,21 +593,14 @@ func initConfigVM(c *cli.Context) (vm.Config, error) {
 	bfMinDuration := c.Duration(vmBackoffMinDuration)
 	bf, err := backoff.New(bfRetries, bfFactor, bfMinDuration)
 	if err != nil {
-		return vm.Config{}, fmt.Errorf("failed to create backoff object: %w", err)
-	}
-
-	authCfg, err := auth.Generate(
-		auth.WithBasicAuth(c.String(vmUser), c.String(vmPassword)),
-		auth.WithBearer(c.String(vmBearerToken)),
-		auth.WithHeaders(c.String(vmHeaders)))
-	if err != nil {
-		return vm.Config{}, fmt.Errorf("error initialize auth config for destination: %s: %w", addr, err)
+		return vm.Config{}, fmt.Errorf("failed to create backoff object: %s", err)
 	}
 
 	return vm.Config{
 		Addr:               addr,
 		Transport:          tr,
-		AuthCfg:            authCfg,
+		User:               c.String(vmUser),
+		Password:           c.String(vmPassword),
 		Concurrency:        uint8(c.Int(vmConcurrency)),
 		Compress:           c.Bool(vmCompress),
 		AccountID:          c.String(vmAccountID),

app/vmctl/mimir/lazyreader.go

@@ -54,7 +54,7 @@ func (lbr *lazyBlockReader) initialize() error {
 	// fetching block and parse it and store it in lbr.reader
 	temp, err := lbr.mkTempDir()
 	if err != nil {
-		return fmt.Errorf("failed to create temp dir: %w", err)
+		return fmt.Errorf("failed to create temp dir: %s", err)
 	}
 
 	lbr.tempDirPath = temp
@@ -85,7 +85,7 @@ func (lbr *lazyBlockReader) initialize() error {
 			return fmt.Errorf("failed to fetch chunk file: %q: %w", chunkName, err)
 		}
 		if err := lbr.writeFile(temp, blockChunkPath, chunk); err != nil {
-			return fmt.Errorf("failed to write chunk file: %q: %w", chunkName, err)
+			return fmt.Errorf("failed to write chunk file: %q: %s", chunkName, err)
 		}
 	}
 
@@ -135,7 +135,7 @@ func (lbr *lazyBlockReader) Meta() tsdb.BlockMeta {
 // Size returns the number of bytes that the block takes up on disk.
 func (lbr *lazyBlockReader) Size() int64 {
 	if err := lbr.initialize(); err != nil {
-		lbr.err = fmt.Errorf("error get Size of the block: %w, return zero size", err)
+		lbr.err = fmt.Errorf("error get Size of the block: %s, return zero size", err)
 		return 0
 	}
 	return lbr.reader.Size()
@@ -167,11 +167,11 @@ func (lbr *lazyBlockReader) Close() error {
 func (lbr *lazyBlockReader) mkTempDir() (string, error) {
 	temp, err := os.MkdirTemp("", lbr.ID.String())
 	if err != nil {
-		return "", fmt.Errorf("failed to create temp dir: %w", err)
+		return "", fmt.Errorf("failed to create temp dir: %s", err)
 	}
 	err = os.Mkdir(filepath.Join(temp, "chunks"), os.ModePerm)
 	if err != nil {
-		return "", fmt.Errorf("failed to create temp dir: %w", err)
+		return "", fmt.Errorf("failed to create temp dir: %s", err)
 	}
 	return temp, nil
 }

app/vmctl/mimir/mimir.go

@@ -133,11 +133,11 @@ func NewClient(ctx context.Context, cfg Config) (*Client, error) {
 	c.RemoteFS = rfs
 	timeMin, err := utils.ParseTime(cfg.Filter.TimeMin)
 	if err != nil {
-		return nil, fmt.Errorf("failed to parse min time in filter: %w", err)
+		return nil, fmt.Errorf("failed to parse min time in filter: %s", err)
 	}
 	timeMax, err := utils.ParseTime(cfg.Filter.TimeMax)
 	if err != nil {
-		return nil, fmt.Errorf("failed to parse max time in filter: %w", err)
+		return nil, fmt.Errorf("failed to parse max time in filter: %s", err)
 	}
 	c.filter = filter{
 		min:        timeMin.UnixMilli(),
@@ -156,7 +156,7 @@ func (c *Client) Explore() ([]tsdb.BlockReader, error) {
 
 	indexFile, err := c.fetchIndexFile()
 	if err != nil {
-		return nil, fmt.Errorf("failed to fetch index file: %w", err)
+		return nil, fmt.Errorf("failed to fetch index file: %s", err)
 	}
 
 	var blocksToImport []tsdb.BlockReader
@@ -172,7 +172,7 @@ func (c *Client) Explore() ([]tsdb.BlockReader, error) {
 
 		lazyBlockReader, err := newLazyBlockReader(block, c.RemoteFS)
 		if err != nil {
-			return nil, fmt.Errorf("failed to create lazy block reader: %w", err)
+			return nil, fmt.Errorf("failed to create lazy block reader: %s", err)
 		}
 		blocksToImport = append(blocksToImport, lazyBlockReader)
 	}
@@ -185,7 +185,7 @@ func (c *Client) Explore() ([]tsdb.BlockReader, error) {
 func (c *Client) Read(ctx context.Context, block tsdb.BlockReader) (*prometheus.CloseableSeriesSet, error) {
 	meta := block.Meta()
 	if b, ok := block.(*lazyBlockReader); ok && b.Err() != nil {
-		return nil, fmt.Errorf("failed to read block: %w", b.Err())
+		return nil, fmt.Errorf("failed to read block: %s", b.Err())
 	}
 
 	if meta.ULID.String() == "" {
@@ -218,20 +218,20 @@ func (c *Client) fetchIndexFile() (*Index, error) {
 
 	file, err := c.ReadFile(bucketIndexCompressedFilename)
 	if err != nil {
-		return nil, fmt.Errorf("failed to read bucket index: %w", err)
+		return nil, fmt.Errorf("failed to read bucket index: %s", err)
 	}
 
 	r := bytes.NewReader(file)
 	// Read all the content.
 	gzipReader, err := gzip.NewReader(r)
 	if err != nil {
-		return nil, fmt.Errorf("failed to create gzip reader: %w", err)
+		return nil, fmt.Errorf("failed to create gzip reader: %s", err)
 	}
 
 	var indexFile Index
 	err = json.NewDecoder(gzipReader).Decode(&indexFile)
 	if err != nil {
-		return nil, fmt.Errorf("failed to decode bucket index: %w", err)
+		return nil, fmt.Errorf("failed to decode bucket index: %s", err)
 	}
 
 	return &indexFile, nil

app/vmctl/native/client.go

@@ -47,7 +47,7 @@ func (c *Client) Explore(ctx context.Context, f Filter, tenantID string, start,
 	req, err := http.NewRequestWithContext(ctx, http.MethodGet, url, nil)
 	if err != nil {
 		exploreRequestsErrorsTotal.Inc()
-		return nil, fmt.Errorf("cannot create request to %q: %w", url, err)
+		return nil, fmt.Errorf("cannot create request to %q: %s", url, err)
 	}
 
 	params := req.URL.Query()
@@ -60,14 +60,14 @@ func (c *Client) Explore(ctx context.Context, f Filter, tenantID string, start,
 	if err != nil {
 		exploreRequestsErrorsTotal.Inc()
 		exploreDuration.UpdateDuration(startTime)
-		return nil, fmt.Errorf("series request failed: %w", err)
+		return nil, fmt.Errorf("series request failed: %s", err)
 	}
 
 	var response Response
 	if err := json.NewDecoder(resp.Body).Decode(&response); err != nil {
 		exploreRequestsErrorsTotal.Inc()
 		exploreDuration.UpdateDuration(startTime)
-		return nil, fmt.Errorf("cannot decode series response: %w", err)
+		return nil, fmt.Errorf("cannot decode series response: %s", err)
 	}
 	exploreDuration.UpdateDuration(startTime)
 	return response.MetricNames, resp.Body.Close()
@@ -80,19 +80,19 @@ func (c *Client) ImportPipe(ctx context.Context, dstURL string, pr *io.PipeReade
 	req, err := http.NewRequestWithContext(ctx, http.MethodPost, dstURL, pr)
 	if err != nil {
 		importRequestsErrorsTotal.Inc()
-		return fmt.Errorf("cannot create import request to %q: %w", c.Addr, err)
+		return fmt.Errorf("cannot create import request to %q: %s", c.Addr, err)
 	}
 
 	importResp, err := c.do(req, http.StatusNoContent)
 	if err != nil {
 		importRequestsErrorsTotal.Inc()
 		importDuration.UpdateDuration(startTime)
-		return fmt.Errorf("import request failed: %w", err)
+		return fmt.Errorf("import request failed: %s", err)
 	}
 	if err := importResp.Body.Close(); err != nil {
 		importRequestsErrorsTotal.Inc()
 		importDuration.UpdateDuration(startTime)
-		return fmt.Errorf("cannot close import response body: %w", err)
+		return fmt.Errorf("cannot close import response body: %s", err)
 	}
 	importDuration.UpdateDuration(startTime)
 	return nil
@@ -105,7 +105,7 @@ func (c *Client) ExportPipe(ctx context.Context, url string, f Filter) (io.ReadC
 	req, err := http.NewRequestWithContext(ctx, http.MethodGet, url, nil)
 	if err != nil {
 		exportRequestsErrorsTotal.Inc()
-		return nil, fmt.Errorf("cannot create request to %q: %w", c.Addr, err)
+		return nil, fmt.Errorf("cannot create request to %q: %s", c.Addr, err)
 	}
 
 	params := req.URL.Query()
@@ -136,7 +136,7 @@ func (c *Client) GetSourceTenants(ctx context.Context, f Filter) ([]string, erro
 	u := fmt.Sprintf("%s/%s", c.Addr, nativeTenantsAddr)
 	req, err := http.NewRequestWithContext(ctx, http.MethodGet, u, nil)
 	if err != nil {
-		return nil, fmt.Errorf("cannot create request to %q: %w", u, err)
+		return nil, fmt.Errorf("cannot create request to %q: %s", u, err)
 	}
 
 	params := req.URL.Query()
@@ -150,18 +150,18 @@ func (c *Client) GetSourceTenants(ctx context.Context, f Filter) ([]string, erro
 
 	resp, err := c.do(req, http.StatusOK)
 	if err != nil {
-		return nil, fmt.Errorf("tenants request failed: %w", err)
+		return nil, fmt.Errorf("tenants request failed: %s", err)
 	}
 
 	var r struct {
 		Tenants []string `json:"data"`
 	}
 	if err := json.NewDecoder(resp.Body).Decode(&r); err != nil {
-		return nil, fmt.Errorf("cannot decode tenants response: %w", err)
+		return nil, fmt.Errorf("cannot decode tenants response: %s", err)
 	}
 
 	if err := resp.Body.Close(); err != nil {
-		return nil, fmt.Errorf("cannot close tenants response body: %w", err)
+		return nil, fmt.Errorf("cannot close tenants response body: %s", err)
 	}
 
 	return r.Tenants, nil
@@ -180,7 +180,7 @@ func (c *Client) do(req *http.Request, expSC int) (*http.Response, error) {
 	if resp.StatusCode != expSC {
 		body, err := io.ReadAll(resp.Body)
 		if err != nil {
-			return nil, fmt.Errorf("failed to read response body for status code %d: %w", resp.StatusCode, err)
+			return nil, fmt.Errorf("failed to read response body for status code %d: %s", resp.StatusCode, err)
 		}
 		return nil, fmt.Errorf("unexpected response code %d: %s", resp.StatusCode, string(body))
 	}

app/vmctl/opentsdb.go

@@ -47,7 +47,7 @@ func (op *otsdbProcessor) run(ctx context.Context) error {
 		q := fmt.Sprintf("%s/api/suggest?type=metrics&q=%s&max=%d", op.oc.Addr, filter, op.oc.Limit)
 		m, err := op.oc.FindMetrics(q)
 		if err != nil {
-			return fmt.Errorf("metric discovery failed for %q: %w", q, err)
+			return fmt.Errorf("metric discovery failed for %q: %s", q, err)
 		}
 		metrics = append(metrics, m...)
 	}
@@ -76,7 +76,7 @@ func (op *otsdbProcessor) run(ctx context.Context) error {
 		log.Printf("Starting work on %s", metric)
 		serieslist, err := op.oc.FindSeries(metric)
 		if err != nil {
-			return fmt.Errorf("couldn't retrieve series list for %s: %w", metric, err)
+			return fmt.Errorf("couldn't retrieve series list for %s : %s", metric, err)
 		}
 		/*
 			Create channels for collecting/processing series and errors
@@ -95,7 +95,7 @@ func (op *otsdbProcessor) run(ctx context.Context) error {
 				for s := range seriesCh {
 					if err := op.do(s); err != nil {
 						otsdbErrorsTotal.Inc()
-						errCh <- fmt.Errorf("couldn't retrieve series for %s: %w", metric, err)
+						errCh <- fmt.Errorf("couldn't retrieve series for %s : %s", metric, err)
 						return
 					}
 					otsdbSeriesProcessed.Inc()
@@ -112,7 +112,7 @@ func (op *otsdbProcessor) run(ctx context.Context) error {
 		// check for any lingering errors on the query side
 		for otsdbErr := range errCh {
 			if runErr == nil {
-				runErr = fmt.Errorf("import process failed:\n%w", otsdbErr)
+				runErr = fmt.Errorf("import process failed: \n%s", otsdbErr)
 			}
 		}
 		bar.Finish()
@@ -125,7 +125,7 @@ func (op *otsdbProcessor) run(ctx context.Context) error {
 	for vmErr := range op.im.Errors() {
 		if vmErr.Err != nil {
 			otsdbErrorsTotal.Inc()
-			return fmt.Errorf("import process failed: %w", wrapErr(vmErr, op.isVerbose))
+			return fmt.Errorf("import process failed: %s", wrapErr(vmErr, op.isVerbose))
 		}
 	}
 	log.Println("Import finished!")
@@ -141,12 +141,12 @@ func (op *otsdbProcessor) sendQueries(ctx context.Context, serieslist []opentsdb
 			for _, tr := range rt.QueryRanges {
 				select {
 				case <-ctx.Done():
-					return fmt.Errorf("context canceled: %w", ctx.Err())
+					return fmt.Errorf("context canceled: %s", ctx.Err())
 				case otsdbErr := <-errCh:
 					otsdbErrorsTotal.Inc()
-					return fmt.Errorf("opentsdb error: %w", otsdbErr)
+					return fmt.Errorf("opentsdb error: %s", otsdbErr)
 				case vmErr := <-op.im.Errors():
-					return fmt.Errorf("import process failed: %w", wrapErr(vmErr, op.isVerbose))
+					return fmt.Errorf("import process failed: %s", wrapErr(vmErr, op.isVerbose))
 				case seriesCh <- queryObj{
 					Tr: tr, StartTime: startTime,
 					Series: series, Rt: opentsdb.RetentionMeta{
@@ -166,7 +166,7 @@ func (op *otsdbProcessor) do(s queryObj) error {
 	end := s.StartTime - s.Tr.End
 	data, err := op.oc.GetData(s.Series, s.Rt, start, end, op.oc.MsecsTime)
 	if err != nil {
-		return fmt.Errorf("failed to collect data for %v in %v:%v :: %w", s.Series, s.Rt, s.Tr, err)
+		return fmt.Errorf("failed to collect data for %v in %v:%v :: %v", s.Series, s.Rt, s.Tr, err)
 	}
 	if len(data.Timestamps) < 1 || len(data.Values) < 1 {
 		log.Printf("no data found for %v in %v:%v...skipping", s.Series, s.Rt, s.Tr)

app/vmctl/opentsdb/opentsdb.go

@@ -106,7 +106,7 @@ func (c Client) FindMetrics(q string) ([]string, error) {
 
 	resp, err := c.c.Get(q)
 	if err != nil {
-		return nil, fmt.Errorf("failed to send GET request to %q: %w", q, err)
+		return nil, fmt.Errorf("failed to send GET request to %q: %s", q, err)
 	}
 	defer func() { _ = resp.Body.Close() }()
 	if resp.StatusCode != 200 {
@@ -114,12 +114,12 @@ func (c Client) FindMetrics(q string) ([]string, error) {
 	}
 	body, err := io.ReadAll(resp.Body)
 	if err != nil {
-		return nil, fmt.Errorf("could not retrieve metric data from %q: %w", q, err)
+		return nil, fmt.Errorf("could not retrieve metric data from %q: %s", q, err)
 	}
 	var metriclist []string
 	err = json.Unmarshal(body, &metriclist)
 	if err != nil {
-		return nil, fmt.Errorf("failed to read response from %q: %w", q, err)
+		return nil, fmt.Errorf("failed to read response from %q: %s", q, err)
 	}
 	return metriclist, nil
 }
@@ -130,7 +130,7 @@ func (c Client) FindSeries(metric string) ([]Meta, error) {
 	q := fmt.Sprintf("%s/api/search/lookup?m=%s&limit=%d", c.Addr, metric, c.Limit)
 	resp, err := c.c.Get(q)
 	if err != nil {
-		return nil, fmt.Errorf("failed to send GET request to %q: %w", q, err)
+		return nil, fmt.Errorf("failed to send GET request to %q: %s", q, err)
 	}
 	defer func() { _ = resp.Body.Close() }()
 	if resp.StatusCode != 200 {
@@ -138,12 +138,12 @@ func (c Client) FindSeries(metric string) ([]Meta, error) {
 	}
 	body, err := io.ReadAll(resp.Body)
 	if err != nil {
-		return nil, fmt.Errorf("could not retrieve series data from %q: %w", q, err)
+		return nil, fmt.Errorf("could not retrieve series data from %q: %s", q, err)
 	}
 	var results MetaResults
 	err = json.Unmarshal(body, &results)
 	if err != nil {
-		return nil, fmt.Errorf("failed to read response from %q: %w", q, err)
+		return nil, fmt.Errorf("failed to read response from %q: %s", q, err)
 	}
 	return results.Results, nil
 }
@@ -183,7 +183,7 @@ func (c Client) GetData(series Meta, rt RetentionMeta, start int64, end int64, m
 	q := fmt.Sprintf("%s/api/query?%s", c.Addr, queryStr)
 	resp, err := c.c.Get(q)
 	if err != nil {
-		return Metric{}, fmt.Errorf("failed to send GET request to %q: %w", q, err)
+		return Metric{}, fmt.Errorf("failed to send GET request to %q: %s", q, err)
 	}
 	defer func() { _ = resp.Body.Close() }()
 	/*
@@ -303,7 +303,7 @@ func NewClient(cfg Config) (*Client, error) {
 	for _, r := range cfg.Retentions {
 		ret, err := convertRetention(r, offsetSecs, cfg.MsecsTime)
 		if err != nil {
-			return &Client{}, fmt.Errorf("couldn't parse retention %q :: %w", r, err)
+			return &Client{}, fmt.Errorf("couldn't parse retention %q :: %v", r, err)
 		}
 		retentions = append(retentions, ret)
 	}

app/vmctl/opentsdb/parser.go

@@ -88,7 +88,7 @@ func convertRetention(retention string, offset int64, msecTime bool) (Retention,
 	}
 	queryLengthDuration, err := convertDuration(chunks[2])
 	if err != nil {
-		return Retention{}, fmt.Errorf("invalid ttl (second order) duration string: %q: %w", chunks[2], err)
+		return Retention{}, fmt.Errorf("invalid ttl (second order) duration string: %q: %s", chunks[2], err)
 	}
 	// set ttl in milliseconds, unless we aren't using millisecond time in OpenTSDB...then use seconds
 	queryLength := queryLengthDuration.Milliseconds()
@@ -110,7 +110,7 @@ func convertRetention(retention string, offset int64, msecTime bool) (Retention,
 
 	aggTimeDuration, err := convertDuration(aggregates[1])
 	if err != nil {
-		return Retention{}, fmt.Errorf("invalid aggregation time duration string: %q: %w", aggregates[1], err)
+		return Retention{}, fmt.Errorf("invalid aggregation time duration string: %q: %s", aggregates[1], err)
 	}
 	aggTime := aggTimeDuration.Milliseconds()
 	if !msecTime {
@@ -119,7 +119,7 @@ func convertRetention(retention string, offset int64, msecTime bool) (Retention,
 
 	rowLengthDuration, err := convertDuration(chunks[1])
 	if err != nil {
-		return Retention{}, fmt.Errorf("invalid row length (first order) duration string: %q: %w", chunks[1], err)
+		return Retention{}, fmt.Errorf("invalid row length (first order) duration string: %q: %s", chunks[1], err)
 	}
 	// set length of each row in milliseconds, unless we aren't using millisecond time in OpenTSDB...then use seconds
 	rowLength := rowLengthDuration.Milliseconds()

app/vmctl/prometheus.go

@@ -46,7 +46,7 @@ type prometheusProcessor struct {
 func (pp *prometheusProcessor) run(ctx context.Context) error {
 	blocks, err := pp.cl.Explore()
 	if err != nil {
-		return fmt.Errorf("explore failed: %w", err)
+		return fmt.Errorf("explore failed: %s", err)
 	}
 	if len(blocks) < 1 {
 		return fmt.Errorf("found no blocks to import")
@@ -57,7 +57,7 @@ func (pp *prometheusProcessor) run(ctx context.Context) error {
 	}
 
 	if err := pp.processBlocks(ctx, blocks); err != nil {
-		return fmt.Errorf("migration failed: %w", err)
+		return fmt.Errorf("migration failed: %s", err)
 	}
 
 	log.Println("Import finished!")
@@ -68,7 +68,7 @@ func (pp *prometheusProcessor) run(ctx context.Context) error {
 func (pp *prometheusProcessor) do(ctx context.Context, b tsdb.BlockReader) error {
 	css, err := pp.cl.Read(ctx, b)
 	if err != nil {
-		return fmt.Errorf("failed to read block: %w", err)
+		return fmt.Errorf("failed to read block: %s", err)
 	}
 	defer func() {
 		if err := css.Close(); err != nil {
@@ -146,7 +146,7 @@ func (pp *prometheusProcessor) processBlocks(ctx context.Context, blocks []tsdb.
 			for br := range blockReadersCh {
 				if err := pp.do(ctx, br); err != nil {
 					promErrorsTotal.Inc()
-					errCh <- fmt.Errorf("cannot read block %q: %w", br.Meta().ULID, err)
+					errCh <- fmt.Errorf("cannot read block %q: %s", br.Meta().ULID, err)
 					return
 				}
 				if cb, ok := br.(io.Closer); ok {
@@ -164,11 +164,11 @@ func (pp *prometheusProcessor) processBlocks(ctx context.Context, blocks []tsdb.
 		select {
 		case promErr := <-errCh:
 			close(blockReadersCh)
-			return fmt.Errorf("prometheus error: %w", promErr)
+			return fmt.Errorf("prometheus error: %s", promErr)
 		case vmErr := <-pp.im.Errors():
 			close(blockReadersCh)
 			promErrorsTotal.Inc()
-			return fmt.Errorf("import process failed: %w", wrapErr(vmErr, pp.isVerbose))
+			return fmt.Errorf("import process failed: %s", wrapErr(vmErr, pp.isVerbose))
 		case blockReadersCh <- br:
 		}
 	}
@@ -182,11 +182,11 @@ func (pp *prometheusProcessor) processBlocks(ctx context.Context, blocks []tsdb.
 	for vmErr := range pp.im.Errors() {
 		if vmErr.Err != nil {
 			promErrorsTotal.Inc()
-			return fmt.Errorf("import process failed: %w", wrapErr(vmErr, pp.isVerbose))
+			return fmt.Errorf("import process failed: %s", wrapErr(vmErr, pp.isVerbose))
 		}
 	}
 	for err := range errCh {
-		return fmt.Errorf("import process failed: %w", err)
+		return fmt.Errorf("import process failed: %s", err)
 	}
 
 	return nil

app/vmctl/prometheus/prometheus.go

@@ -59,12 +59,12 @@ func (f filter) inRange(minV, maxV int64) bool {
 func NewClient(cfg Config) (*Client, error) {
 	db, err := tsdb.OpenDBReadOnly(cfg.Snapshot, cfg.TemporaryDir, nil)
 	if err != nil {
-		return nil, fmt.Errorf("failed to open snapshot %q: %w", cfg.Snapshot, err)
+		return nil, fmt.Errorf("failed to open snapshot %q: %s", cfg.Snapshot, err)
 	}
 	c := &Client{DBReadOnly: db}
 	timeMin, timeMax, err := parseTime(cfg.Filter.TimeMin, cfg.Filter.TimeMax)
 	if err != nil {
-		return nil, fmt.Errorf("failed to parse time in filter: %w", err)
+		return nil, fmt.Errorf("failed to parse time in filter: %s", err)
 	}
 	c.filter = filter{
 		min:        timeMin,
@@ -83,7 +83,7 @@ func NewClient(cfg Config) (*Client, error) {
 func (c *Client) Explore() ([]tsdb.BlockReader, error) {
 	blocks, err := c.Blocks()
 	if err != nil {
-		return nil, fmt.Errorf("failed to fetch blocks: %w", err)
+		return nil, fmt.Errorf("failed to fetch blocks: %s", err)
 	}
 	s := &vmctlutil.Stats{
 		Filtered: c.filter.min != 0 || c.filter.max != 0 || c.filter.label != "",
@@ -142,14 +142,14 @@ func parseTime(start, end string) (int64, int64, error) {
 	if start != "" {
 		v, err := time.Parse(time.RFC3339, start)
 		if err != nil {
-			return 0, 0, fmt.Errorf("failed to parse %q: %w", start, err)
+			return 0, 0, fmt.Errorf("failed to parse %q: %s", start, err)
 		}
 		s = v.UnixNano() / int64(time.Millisecond)
 	}
 	if end != "" {
 		v, err := time.Parse(time.RFC3339, end)
 		if err != nil {
-			return 0, 0, fmt.Errorf("failed to parse %q: %w", end, err)
+			return 0, 0, fmt.Errorf("failed to parse %q: %s", end, err)
 		}
 		e = v.UnixNano() / int64(time.Millisecond)
 	}

app/vmctl/remoteread.go

@@ -44,7 +44,7 @@ func (rrp *remoteReadProcessor) run(ctx context.Context) error {
 
 	ranges, err := stepper.SplitDateRange(*rrp.filter.timeStart, *rrp.filter.timeEnd, rrp.filter.chunk, rrp.filter.timeReverse)
 	if err != nil {
-		return fmt.Errorf("failed to create date ranges for the given time filters: %w", err)
+		return fmt.Errorf("failed to create date ranges for the given time filters: %v", err)
 	}
 
 	question := fmt.Sprintf("Selected time range %q - %q will be split into %d ranges according to %q step. Continue?",
@@ -74,7 +74,7 @@ func (rrp *remoteReadProcessor) run(ctx context.Context) error {
 			for r := range rangeC {
 				if err := rrp.do(ctx, r); err != nil {
 					remoteReadErrorsTotal.Inc()
-					errCh <- fmt.Errorf("request failed for: %w", err)
+					errCh <- fmt.Errorf("request failed for: %s", err)
 					return
 				}
 				remoteReadRangesProcessed.Inc()
@@ -86,10 +86,10 @@ func (rrp *remoteReadProcessor) run(ctx context.Context) error {
 	for _, r := range ranges {
 		select {
 		case infErr := <-errCh:
-			return fmt.Errorf("remote read error: %w", infErr)
+			return fmt.Errorf("remote read error: %s", infErr)
 		case vmErr := <-rrp.dst.Errors():
 			remoteReadErrorsTotal.Inc()
-			return fmt.Errorf("import process failed: %w", wrapErr(vmErr, rrp.isVerbose))
+			return fmt.Errorf("import process failed: %s", wrapErr(vmErr, rrp.isVerbose))
 		case rangeC <- &remoteread.Filter{
 			StartTimestampMs: r[0].UnixMilli(),
 			EndTimestampMs:   r[1].UnixMilli(),
@@ -105,11 +105,11 @@ func (rrp *remoteReadProcessor) run(ctx context.Context) error {
 	for vmErr := range rrp.dst.Errors() {
 		if vmErr.Err != nil {
 			remoteReadErrorsTotal.Inc()
-			return fmt.Errorf("import process failed: %w", wrapErr(vmErr, rrp.isVerbose))
+			return fmt.Errorf("import process failed: %s", wrapErr(vmErr, rrp.isVerbose))
 		}
 	}
 	for err := range errCh {
-		return fmt.Errorf("import process failed: %w", err)
+		return fmt.Errorf("import process failed: %s", err)
 	}
 
 	return nil
@@ -119,7 +119,7 @@ func (rrp *remoteReadProcessor) do(ctx context.Context, filter *remoteread.Filte
 	return rrp.src.Read(ctx, filter, func(series *vm.TimeSeries) error {
 		if err := rrp.dst.Input(series); err != nil {
 			return fmt.Errorf(
-				"failed to read data for time range start: %d, end: %d: %w",
+				"failed to read data for time range start: %d, end: %d, %s",
 				filter.StartTimestampMs, filter.EndTimestampMs, err)
 		}
 		return nil

app/vmctl/remoteread/remoteread.go

@@ -8,14 +8,12 @@ import (
 	"io"
 	"net/http"
 	"net/url"
-	"strconv"
 	"strings"
 	"time"
 
 	"github.com/gogo/protobuf/proto"
 	"github.com/golang/snappy"
 	"github.com/prometheus/prometheus/config"
-	"github.com/prometheus/prometheus/model/histogram"
 	"github.com/prometheus/prometheus/prompb"
 	"github.com/prometheus/prometheus/storage/remote"
 	"github.com/prometheus/prometheus/tsdb/chunkenc"
@@ -159,7 +157,7 @@ func (c *Client) Read(ctx context.Context, filter *Filter, streamCb StreamCallba
 		if errors.Is(err, context.Canceled) {
 			return fmt.Errorf("fetch request has ben cancelled")
 		}
-		return fmt.Errorf("error while fetching data from remote storage: %w", err)
+		return fmt.Errorf("error while fetching data from remote storage: %s", err)
 	}
 	return nil
 }
@@ -236,29 +234,9 @@ func processResponse(body io.ReadCloser, callback StreamCallback) error {
 	// shouldn't be accounted as an error.
 	for _, res := range readResp.Results {
 		for _, ts := range res.Timeseries {
-			// A series contains either float samples or native histogram samples.
-			// Both fields are processed independently, since a series may switch
-			// from float to native histogram representation at some point in time,
-			// so the requested time range may contain samples of both types.
-			if len(ts.Samples) > 0 {
-				vmTs := convertSamples(ts.Samples, ts.Labels)
-				if err := callback(vmTs); err != nil {
-					return err
-				}
-			}
-			if len(ts.Histograms) > 0 {
-				hSamples := make([]histogramSample, 0, len(ts.Histograms))
-				for _, h := range ts.Histograms {
-					hSamples = append(hSamples, histogramSample{
-						timestamp: h.Timestamp,
-						fh:        h.ToFloatHistogram(),
-					})
-				}
-				for _, vmTs := range convertHistograms(hSamples, ts.Labels) {
-					if err := callback(vmTs); err != nil {
-						return err
-					}
-				}
+			vmTs := convertSamples(ts.Samples, ts.Labels)
+			if err := callback(vmTs); err != nil {
+				return err
 			}
 		}
 	}
@@ -285,45 +263,17 @@ func processStreamResponse(body io.ReadCloser, callback StreamCallback) error {
 
 		for _, series := range res.ChunkedSeries {
 			samples := make([]prompb.Sample, 0)
-			var hSamples []histogramSample
 			for _, chunk := range series.Chunks {
-				switch chunk.Type {
-				case prompb.Chunk_XOR, prompb.Chunk_UNKNOWN:
-					// In proto3 the `type` field may be left unset (UNKNOWN) for XOR chunks.
-					// Prometheus remote.proto: "REQUIREMENT: when using proto3, this field
-					// MUST be set when using anything else than XOR". Senders before native
-					// histograms support (Prometheus < 2.40) do not set this field at all,
-					// so UNKNOWN chunks must be parsed as XOR ones.
-					s, err := parseSamples(chunk.Data)
-					if err != nil {
-						return err
-					}
-					samples = append(samples, s...)
-				case prompb.Chunk_HISTOGRAM, prompb.Chunk_FLOAT_HISTOGRAM:
-					hs, err := parseHistograms(chunk.Type, chunk.Data)
-					if err != nil {
-						return err
-					}
-					hSamples = append(hSamples, hs...)
-				default:
-					return fmt.Errorf("unsupported chunk encoding %q", chunk.Type)
+				s, err := parseSamples(chunk.Data)
+				if err != nil {
+					return err
 				}
+				samples = append(samples, s...)
 			}
 
-			// A series contains either XOR chunks or native histogram chunks.
-			// Both are processed independently, since a series may switch
-			// from float to native histogram representation at some point in time,
-			// so the requested time range may contain chunks of both types.
-			if len(samples) > 0 {
-				ts := convertSamples(samples, series.Labels)
-				if err := callback(ts); err != nil {
-					return err
-				}
-			}
-			for _, ts := range convertHistograms(hSamples, series.Labels) {
-				if err := callback(ts); err != nil {
-					return err
-				}
+			ts := convertSamples(samples, series.Labels)
+			if err := callback(ts); err != nil {
+				return err
 			}
 		}
 	}
@@ -362,151 +312,6 @@ func parseSamples(chunk []byte) ([]prompb.Sample, error) {
 	return samples, it.Err()
 }
 
-// histogramSample represents a single native histogram sample.
-type histogramSample struct {
-	timestamp int64
-	fh        *histogram.FloatHistogram
-}
-
-func parseHistograms(encoding prompb.Chunk_Encoding, chunk []byte) ([]histogramSample, error) {
-	var enc chunkenc.Encoding
-	switch encoding {
-	case prompb.Chunk_HISTOGRAM:
-		enc = chunkenc.EncHistogram
-	case prompb.Chunk_FLOAT_HISTOGRAM:
-		enc = chunkenc.EncFloatHistogram
-	default:
-		return nil, fmt.Errorf("unsupported histogram chunk encoding %q", encoding)
-	}
-	c, err := chunkenc.FromData(enc, chunk)
-	if err != nil {
-		return nil, fmt.Errorf("error read chunk: %w", err)
-	}
-
-	var hSamples []histogramSample
-	it := c.Iterator(nil)
-	for {
-		typ := it.Next()
-		if typ == chunkenc.ValNone {
-			break
-		}
-		switch typ {
-		case chunkenc.ValHistogram:
-			ts, h := it.AtHistogram(nil)
-			hSamples = append(hSamples, histogramSample{
-				timestamp: ts,
-				fh:        h.ToFloat(nil),
-			})
-		case chunkenc.ValFloatHistogram:
-			ts, fh := it.AtFloatHistogram(nil)
-			hSamples = append(hSamples, histogramSample{
-				timestamp: ts,
-				fh:        fh,
-			})
-		default:
-			// Skip unsupported values
-			continue
-		}
-	}
-	if err := it.Err(); err != nil {
-		return nil, fmt.Errorf("error iterate over chunks: %w", err)
-	}
-
-	return hSamples, nil
-}
-
-// convertHistograms converts native histogram samples into VictoriaMetrics histogram
-// time series in the same way as VictoriaMetrics converts native histograms
-// received via Prometheus remote write protocol: every native histogram sample
-// is converted into `<name>_count` and `<name>_sum` series plus a set of
-// `<name>_bucket` series with `vmrange` labels containing non-cumulative bucket counts.
-// The only difference is that for native histograms with custom buckets (NHCB)
-// bucket bounds are taken from the custom values, while the remote write protocol
-// parser ignores custom values and estimates the bounds with the exponential formula.
-// See https://prometheus.io/docs/specs/native_histograms/#data-model
-func convertHistograms(hSamples []histogramSample, labels []prompb.Label) []*vm.TimeSeries {
-	if len(hSamples) == 0 {
-		return nil
-	}
-
-	labelPairs := make([]vm.LabelPair, 0, len(labels))
-	nameValue := ""
-	for _, label := range labels {
-		if label.Name == "__name__" {
-			nameValue = label.Value
-			continue
-		}
-		labelPairs = append(labelPairs, vm.LabelPair{Name: label.Name, Value: label.Value})
-	}
-	// the metric has no name, skip it in the same way as VictoriaMetrics does
-	// when it receives a native histogram without the metric name via remote write protocol.
-	if nameValue == "" {
-		return nil
-	}
-
-	countSeries := &vm.TimeSeries{
-		Name:       nameValue + "_count",
-		LabelPairs: labelPairs,
-	}
-	sumSeries := &vm.TimeSeries{
-		Name:       nameValue + "_sum",
-		LabelPairs: labelPairs,
-	}
-	bucketSeries := make(map[string]*vm.TimeSeries)
-	// vmranges preserves the order of bucketSeries creation
-	// in order to get deterministic results.
-	var vmranges []string
-
-	for _, hs := range hSamples {
-		fh := hs.fh
-		countSeries.Timestamps = append(countSeries.Timestamps, hs.timestamp)
-		countSeries.Values = append(countSeries.Values, fh.Count)
-		sumSeries.Timestamps = append(sumSeries.Timestamps, hs.timestamp)
-		sumSeries.Values = append(sumSeries.Values, fh.Sum)
-
-		it := fh.AllBucketIterator()
-		for it.Next() {
-			b := it.At()
-			if b.Count <= 0 {
-				continue
-			}
-			vmrange := formatVmrange(b.Lower, b.Upper)
-			s := bucketSeries[vmrange]
-			if s == nil {
-				bucketLabelPairs := make([]vm.LabelPair, len(labelPairs), len(labelPairs)+1)
-				copy(bucketLabelPairs, labelPairs)
-				bucketLabelPairs = append(bucketLabelPairs, vm.LabelPair{Name: "vmrange", Value: vmrange})
-				s = &vm.TimeSeries{
-					Name:       nameValue + "_bucket",
-					LabelPairs: bucketLabelPairs,
-				}
-				bucketSeries[vmrange] = s
-				vmranges = append(vmranges, vmrange)
-			}
-			s.Timestamps = append(s.Timestamps, hs.timestamp)
-			s.Values = append(s.Values, b.Count)
-		}
-	}
-
-	tss := make([]*vm.TimeSeries, 0, 2+len(vmranges))
-	tss = append(tss, countSeries, sumSeries)
-	for _, vmrange := range vmranges {
-		tss = append(tss, bucketSeries[vmrange])
-	}
-	return tss
-}
-
-// formatVmrange formats the given bucket bounds into `vmrange` label value
-// in the same way as VictoriaMetrics does for native histograms
-// received via Prometheus remote write protocol.
-func formatVmrange(lower, upper float64) string {
-	b := make([]byte, 0, 24)
-	b = strconv.AppendFloat(b, lower, 'e', 3, 64)
-	b = append(b, "..."...)
-	b = strconv.AppendFloat(b, upper, 'e', 3, 64)
-	return string(b)
-}
-
 type keyValue struct {
 	key   string
 	value string

app/vmctl/remoteread/remoteread_test.go

@@ -1,334 +0,0 @@
-package remoteread
-
-import (
-	"bytes"
-	"io"
-	"reflect"
-	"testing"
-
-	"github.com/gogo/protobuf/proto"
-	"github.com/golang/snappy"
-	"github.com/prometheus/prometheus/model/histogram"
-	"github.com/prometheus/prometheus/prompb"
-	"github.com/prometheus/prometheus/storage/remote"
-	"github.com/prometheus/prometheus/tsdb/chunkenc"
-
-	"github.com/VictoriaMetrics/VictoriaMetrics/app/vmctl/vm"
-)
-
-func testHistogram(mul int64) *histogram.Histogram {
-	return &histogram.Histogram{
-		Schema:          0,
-		Count:           uint64(10 * mul),
-		Sum:             25.5 * float64(mul),
-		ZeroThreshold:   0.001,
-		ZeroCount:       uint64(2 * mul),
-		PositiveSpans:   []histogram.Span{{Offset: 0, Length: 2}},
-		PositiveBuckets: []int64{1 * mul, 2 * mul},
-		NegativeSpans:   []histogram.Span{{Offset: 0, Length: 1}},
-		NegativeBuckets: []int64{4 * mul},
-	}
-}
-
-func TestConvertHistograms(t *testing.T) {
-	f := func(hSamples []histogramSample, labels []prompb.Label, expected []*vm.TimeSeries) {
-		t.Helper()
-
-		tss := convertHistograms(hSamples, labels)
-		if !reflect.DeepEqual(tss, expected) {
-			t.Fatalf("unexpected result\ngot:\n%v\nwant:\n%v", tss, expected)
-		}
-	}
-
-	// series without samples
-	f(nil, []prompb.Label{{Name: "__name__", Value: "foo"}}, nil)
-
-	// series without the metric name must be skipped
-	f([]histogramSample{
-		{timestamp: 1000, fh: testHistogram(1).ToFloat(nil)},
-	}, []prompb.Label{{Name: "job", Value: "bar"}}, nil)
-
-	// native histogram must be converted to _count, _sum and _bucket series
-	// in the same way as VictoriaMetrics does for Prometheus remote write protocol
-	labels := []prompb.Label{
-		{Name: "__name__", Value: "request_duration_seconds"},
-		{Name: "job", Value: "bar"},
-	}
-	jobLabel := []vm.LabelPair{{Name: "job", Value: "bar"}}
-	bucketLabels := func(vmrange string) []vm.LabelPair {
-		return []vm.LabelPair{
-			{Name: "job", Value: "bar"},
-			{Name: "vmrange", Value: vmrange},
-		}
-	}
-	f([]histogramSample{
-		{timestamp: 1000, fh: testHistogram(1).ToFloat(nil)},
-		{timestamp: 2000, fh: testHistogram(2).ToFloat(nil)},
-	}, labels, []*vm.TimeSeries{
-		{
-			Name:       "request_duration_seconds_count",
-			LabelPairs: jobLabel,
-			Timestamps: []int64{1000, 2000},
-			Values:     []float64{10, 20},
-		},
-		{
-			Name:       "request_duration_seconds_sum",
-			LabelPairs: jobLabel,
-			Timestamps: []int64{1000, 2000},
-			Values:     []float64{25.5, 51},
-		},
-		{
-			Name:       "request_duration_seconds_bucket",
-			LabelPairs: bucketLabels("-1.000e+00...-5.000e-01"),
-			Timestamps: []int64{1000, 2000},
-			Values:     []float64{4, 8},
-		},
-		{
-			Name:       "request_duration_seconds_bucket",
-			LabelPairs: bucketLabels("-1.000e-03...1.000e-03"),
-			Timestamps: []int64{1000, 2000},
-			Values:     []float64{2, 4},
-		},
-		{
-			Name:       "request_duration_seconds_bucket",
-			LabelPairs: bucketLabels("5.000e-01...1.000e+00"),
-			Timestamps: []int64{1000, 2000},
-			Values:     []float64{1, 2},
-		},
-		{
-			Name:       "request_duration_seconds_bucket",
-			LabelPairs: bucketLabels("1.000e+00...2.000e+00"),
-			Timestamps: []int64{1000, 2000},
-			Values:     []float64{3, 6},
-		},
-	})
-}
-
-func TestParseHistograms(t *testing.T) {
-	c := chunkenc.NewHistogramChunk()
-	app, err := c.Appender()
-	if err != nil {
-		t.Fatalf("cannot create chunk appender: %s", err)
-	}
-	if _, _, _, err := app.AppendHistogram(nil, 0, 1000, testHistogram(1), true); err != nil {
-		t.Fatalf("cannot append histogram: %s", err)
-	}
-	if _, _, _, err := app.AppendHistogram(nil, 0, 2000, testHistogram(2), true); err != nil {
-		t.Fatalf("cannot append histogram: %s", err)
-	}
-
-	hSamples, err := parseHistograms(prompb.Chunk_HISTOGRAM, c.Bytes())
-	if err != nil {
-		t.Fatalf("cannot parse histogram chunk: %s", err)
-	}
-	if len(hSamples) != 2 {
-		t.Fatalf("unexpected number of histogram samples; got %d; want 2", len(hSamples))
-	}
-	for i, expected := range []struct {
-		timestamp int64
-		count     float64
-		sum       float64
-	}{
-		{timestamp: 1000, count: 10, sum: 25.5},
-		{timestamp: 2000, count: 20, sum: 51},
-	} {
-		if hSamples[i].timestamp != expected.timestamp {
-			t.Fatalf("unexpected timestamp; got %d; want %d", hSamples[i].timestamp, expected.timestamp)
-		}
-		if hSamples[i].fh.Count != expected.count {
-			t.Fatalf("unexpected count; got %f; want %f", hSamples[i].fh.Count, expected.count)
-		}
-		if hSamples[i].fh.Sum != expected.sum {
-			t.Fatalf("unexpected sum; got %f; want %f", hSamples[i].fh.Sum, expected.sum)
-		}
-	}
-
-	// unsupported chunk encoding must return error
-	if _, err := parseHistograms(prompb.Chunk_XOR, c.Bytes()); err == nil {
-		t.Fatalf("expecting non-nil error for unsupported chunk encoding")
-	}
-}
-
-func TestProcessResponse(t *testing.T) {
-	readResp := &prompb.ReadResponse{
-		Results: []*prompb.QueryResult{
-			{
-				Timeseries: []*prompb.TimeSeries{
-					{
-						Labels: []prompb.Label{
-							{Name: "__name__", Value: "cpu_usage"},
-							{Name: "job", Value: "bar"},
-						},
-						Samples: []prompb.Sample{
-							{Timestamp: 1000, Value: 1.5},
-						},
-					},
-					{
-						Labels: []prompb.Label{
-							{Name: "__name__", Value: "request_duration_seconds"},
-							{Name: "job", Value: "bar"},
-						},
-						Histograms: []prompb.Histogram{
-							prompb.FromIntHistogram(1000, testHistogram(1)),
-						},
-					},
-				},
-			},
-		},
-	}
-	data, err := proto.Marshal(readResp)
-	if err != nil {
-		t.Fatalf("cannot marshal ReadResponse: %s", err)
-	}
-	compressed := snappy.Encode(nil, data)
-
-	var tss []*vm.TimeSeries
-	err = processResponse(io.NopCloser(bytes.NewReader(compressed)), func(ts *vm.TimeSeries) error {
-		tss = append(tss, ts)
-		return nil
-	})
-	if err != nil {
-		t.Fatalf("cannot process response: %s", err)
-	}
-
-	// 1 float series + _count + _sum + 4 buckets
-	if len(tss) != 7 {
-		t.Fatalf("unexpected number of time series; got %d; want 7", len(tss))
-	}
-	if tss[0].Name != "cpu_usage" || !reflect.DeepEqual(tss[0].Values, []float64{1.5}) {
-		t.Fatalf("unexpected float series: %v", tss[0])
-	}
-	if tss[1].Name != "request_duration_seconds_count" || !reflect.DeepEqual(tss[1].Values, []float64{10}) {
-		t.Fatalf("unexpected _count series: %v", tss[1])
-	}
-	if tss[2].Name != "request_duration_seconds_sum" || !reflect.DeepEqual(tss[2].Values, []float64{25.5}) {
-		t.Fatalf("unexpected _sum series: %v", tss[2])
-	}
-	for _, ts := range tss[3:] {
-		if ts.Name != "request_duration_seconds_bucket" {
-			t.Fatalf("unexpected bucket series name %q", ts.Name)
-		}
-	}
-}
-
-type nopFlusher struct{}
-
-func (nopFlusher) Flush() {}
-
-func TestProcessStreamResponse(t *testing.T) {
-	// build a histogram chunk
-	hc := chunkenc.NewHistogramChunk()
-	hApp, err := hc.Appender()
-	if err != nil {
-		t.Fatalf("cannot create histogram chunk appender: %s", err)
-	}
-	if _, _, _, err := hApp.AppendHistogram(nil, 0, 1000, testHistogram(1), true); err != nil {
-		t.Fatalf("cannot append histogram: %s", err)
-	}
-
-	// build a float chunk
-	xc := chunkenc.NewXORChunk()
-	xApp, err := xc.Appender()
-	if err != nil {
-		t.Fatalf("cannot create xor chunk appender: %s", err)
-	}
-	xApp.Append(0, 1000, 1.5)
-
-	res := &prompb.ChunkedReadResponse{
-		ChunkedSeries: []*prompb.ChunkedSeries{
-			{
-				Labels: []prompb.Label{
-					{Name: "__name__", Value: "request_duration_seconds"},
-					{Name: "job", Value: "bar"},
-				},
-				Chunks: []prompb.Chunk{
-					{Type: prompb.Chunk_HISTOGRAM, Data: hc.Bytes()},
-				},
-			},
-			{
-				Labels: []prompb.Label{
-					{Name: "__name__", Value: "cpu_usage"},
-				},
-				Chunks: []prompb.Chunk{
-					{Type: prompb.Chunk_XOR, Data: xc.Bytes()},
-				},
-			},
-			{
-				Labels: []prompb.Label{
-					{Name: "__name__", Value: "memory_usage"},
-				},
-				Chunks: []prompb.Chunk{
-					// the `type` field may be unset for XOR chunks,
-					// such chunks must be parsed as XOR ones
-					{Type: prompb.Chunk_UNKNOWN, Data: xc.Bytes()},
-				},
-			},
-		},
-	}
-	data, err := proto.Marshal(res)
-	if err != nil {
-		t.Fatalf("cannot marshal ChunkedReadResponse: %s", err)
-	}
-	var buf bytes.Buffer
-	cw := remote.NewChunkedWriter(&buf, nopFlusher{})
-	if _, err := cw.Write(data); err != nil {
-		t.Fatalf("cannot write chunked response: %s", err)
-	}
-
-	var tss []*vm.TimeSeries
-	err = processStreamResponse(io.NopCloser(&buf), func(ts *vm.TimeSeries) error {
-		tss = append(tss, ts)
-		return nil
-	})
-	if err != nil {
-		t.Fatalf("cannot process stream response: %s", err)
-	}
-
-	// _count + _sum + 4 buckets + 1 float series + 1 float series from UNKNOWN chunk
-	if len(tss) != 8 {
-		t.Fatalf("unexpected number of time series; got %d; want 8", len(tss))
-	}
-	if tss[0].Name != "request_duration_seconds_count" || !reflect.DeepEqual(tss[0].Values, []float64{10}) {
-		t.Fatalf("unexpected _count series: %v", tss[0])
-	}
-	if tss[1].Name != "request_duration_seconds_sum" || !reflect.DeepEqual(tss[1].Values, []float64{25.5}) {
-		t.Fatalf("unexpected _sum series: %v", tss[1])
-	}
-	for _, ts := range tss[2:6] {
-		if ts.Name != "request_duration_seconds_bucket" {
-			t.Fatalf("unexpected bucket series name %q", ts.Name)
-		}
-	}
-	if tss[6].Name != "cpu_usage" || !reflect.DeepEqual(tss[6].Values, []float64{1.5}) {
-		t.Fatalf("unexpected float series: %v", tss[6])
-	}
-	if tss[7].Name != "memory_usage" || !reflect.DeepEqual(tss[7].Values, []float64{1.5}) {
-		t.Fatalf("unexpected float series from UNKNOWN chunk: %v", tss[7])
-	}
-}
-
-func TestParseFloatHistograms(t *testing.T) {
-	c := chunkenc.NewFloatHistogramChunk()
-	app, err := c.Appender()
-	if err != nil {
-		t.Fatalf("cannot create chunk appender: %s", err)
-	}
-	fh := testHistogram(1).ToFloat(nil)
-	if _, _, _, err := app.AppendFloatHistogram(nil, 0, 1000, fh, true); err != nil {
-		t.Fatalf("cannot append float histogram: %s", err)
-	}
-
-	hSamples, err := parseHistograms(prompb.Chunk_FLOAT_HISTOGRAM, c.Bytes())
-	if err != nil {
-		t.Fatalf("cannot parse float histogram chunk: %s", err)
-	}
-	if len(hSamples) != 1 {
-		t.Fatalf("unexpected number of histogram samples; got %d; want 1", len(hSamples))
-	}
-	if hSamples[0].timestamp != 1000 {
-		t.Fatalf("unexpected timestamp; got %d; want 1000", hSamples[0].timestamp)
-	}
-	if hSamples[0].fh.Count != 10 {
-		t.Fatalf("unexpected count; got %f; want 10", hSamples[0].fh.Count)
-	}
-}

app/vmctl/thanos/client.go

@@ -52,7 +52,7 @@ func (f filter) inRange(minV, maxV int64) bool {
 func NewClient(cfg Config) (*Client, error) {
 	minTime, maxTime, err := parseTime(cfg.Filter.TimeMin, cfg.Filter.TimeMax)
 	if err != nil {
-		return nil, fmt.Errorf("failed to parse time in filter: %w", err)
+		return nil, fmt.Errorf("failed to parse time in filter: %s", err)
 	}
 	return &Client{
 		snapshotPath: cfg.Snapshot,
@@ -183,14 +183,14 @@ func parseTime(start, end string) (int64, int64, error) {
 	if start != "" {
 		v, err := time.Parse(time.RFC3339, start)
 		if err != nil {
-			return 0, 0, fmt.Errorf("failed to parse %q: %w", start, err)
+			return 0, 0, fmt.Errorf("failed to parse %q: %s", start, err)
 		}
 		s = v.UnixNano() / int64(time.Millisecond)
 	}
 	if end != "" {
 		v, err := time.Parse(time.RFC3339, end)
 		if err != nil {
-			return 0, 0, fmt.Errorf("failed to parse %q: %w", end, err)
+			return 0, 0, fmt.Errorf("failed to parse %q: %s", end, err)
 		}
 		e = v.UnixNano() / int64(time.Millisecond)
 	}

app/vmctl/thanos_processor.go

@@ -36,7 +36,7 @@ func (tp *thanosProcessor) run(ctx context.Context) error {
 	// Use the first aggregate type to explore blocks (block list is the same for all types)
 	blocks, err := tp.cl.Explore(tp.aggrTypes[0])
 	if err != nil {
-		return fmt.Errorf("explore failed: %w", err)
+		return fmt.Errorf("explore failed: %s", err)
 	}
 	if len(blocks) < 1 {
 		return fmt.Errorf("found no blocks to import")
@@ -84,7 +84,7 @@ func (tp *thanosProcessor) run(ctx context.Context) error {
 		log.Println("Processing raw blocks (resolution=0)...")
 		stats, err := tp.processBlocks(rawBlocks, thanos.AggrTypeNone, bar)
 		if err != nil {
-			return fmt.Errorf("migration failed for raw blocks: %w", err)
+			return fmt.Errorf("migration failed for raw blocks: %s", err)
 		}
 		phases = append(phases, phaseStats{
 			name:    "raw",
@@ -108,7 +108,7 @@ func (tp *thanosProcessor) run(ctx context.Context) error {
 
 		aggrBlocks, err := tp.cl.Explore(aggrType)
 		if err != nil {
-			return fmt.Errorf("explore failed for aggr type %s: %w", aggrType, err)
+			return fmt.Errorf("explore failed for aggr type %s: %s", aggrType, err)
 		}
 
 		var downsampledOnly []thanos.BlockInfo
@@ -128,7 +128,7 @@ func (tp *thanosProcessor) run(ctx context.Context) error {
 		stats, err := tp.processBlocks(downsampledOnly, aggrType, bar)
 		thanos.CloseBlocks(aggrBlocks)
 		if err != nil {
-			return fmt.Errorf("migration failed for aggr type %s: %w", aggrType, err)
+			return fmt.Errorf("migration failed for aggr type %s: %s", aggrType, err)
 		}
 		phases = append(phases, phaseStats{
 			name:    aggrType.String(),
@@ -153,7 +153,7 @@ func (tp *thanosProcessor) run(ctx context.Context) error {
 	for vmErr := range tp.im.Errors() {
 		if vmErr.Err != nil {
 			thanosErrorsTotal.Inc()
-			return fmt.Errorf("import process failed: %w", wrapErr(vmErr, tp.isVerbose))
+			return fmt.Errorf("import process failed: %s", wrapErr(vmErr, tp.isVerbose))
 		}
 	}
 
@@ -184,7 +184,7 @@ func (tp *thanosProcessor) processBlocks(blocks []thanos.BlockInfo, aggrType tha
 				seriesCount, samplesCount, err := tp.do(bi, aggrType)
 				if err != nil {
 					thanosErrorsTotal.Inc()
-					errCh <- fmt.Errorf("read failed for block %q with aggr %s: %w", bi.Block.Meta().ULID, aggrType, err)
+					errCh <- fmt.Errorf("read failed for block %q with aggr %s: %s", bi.Block.Meta().ULID, aggrType, err)
 					return
 				}
 
@@ -209,12 +209,12 @@ func (tp *thanosProcessor) processBlocks(blocks []thanos.BlockInfo, aggrType tha
 		case thanosErr := <-errCh:
 			close(blockReadersCh)
 			wg.Wait()
-			return processBlocksStats{}, fmt.Errorf("thanos error: %w", thanosErr)
+			return processBlocksStats{}, fmt.Errorf("thanos error: %s", thanosErr)
 		case vmErr := <-tp.im.Errors():
 			close(blockReadersCh)
 			wg.Wait()
 			thanosErrorsTotal.Inc()
-			return processBlocksStats{}, fmt.Errorf("import process failed: %w", wrapErr(vmErr, tp.isVerbose))
+			return processBlocksStats{}, fmt.Errorf("import process failed: %s", wrapErr(vmErr, tp.isVerbose))
 		case blockReadersCh <- bi:
 		}
 	}
@@ -223,7 +223,7 @@ func (tp *thanosProcessor) processBlocks(blocks []thanos.BlockInfo, aggrType tha
 	wg.Wait()
 	close(errCh)
 	for err := range errCh {
-		return processBlocksStats{}, fmt.Errorf("import process failed: %w", err)
+		return processBlocksStats{}, fmt.Errorf("import process failed: %s", err)
 	}
 
 	return processBlocksStats{
@@ -236,7 +236,7 @@ func (tp *thanosProcessor) processBlocks(blocks []thanos.BlockInfo, aggrType tha
 func (tp *thanosProcessor) do(bi thanos.BlockInfo, aggrType thanos.AggrType) (uint64, uint64, error) {
 	ss, err := tp.cl.Read(bi)
 	if err != nil {
-		return 0, 0, fmt.Errorf("failed to read block: %w", err)
+		return 0, 0, fmt.Errorf("failed to read block: %s", err)
 	}
 	defer ss.Close() // Ensure querier is closed even on early returns
 

app/vmctl/utils.go

@@ -74,9 +74,9 @@ func wrapErr(vmErr *vm.ImportError, verbose bool) error {
 		verboseMsg = "(enable `--verbose` output to get more details)"
 	}
 	if vmErr.Err == nil {
-		return fmt.Errorf("%w\n\tLatest delivered batch for timestamps range %d - %d %s\n%s",
+		return fmt.Errorf("%s\n\tLatest delivered batch for timestamps range %d - %d %s\n%s",
 			vmErr.Err, minTS, maxTS, verboseMsg, errTS)
 	}
-	return fmt.Errorf("%w\n\tImporting batch failed for timestamps range %d - %d %s\n%s",
+	return fmt.Errorf("%s\n\tImporting batch failed for timestamps range %d - %d %s\n%s",
 		vmErr.Err, minTS, maxTS, verboseMsg, errTS)
 }

app/vmctl/vm/vm.go

@@ -8,12 +8,10 @@ import (
 	"fmt"
 	"io"
 	"net/http"
-	"net/url"
 	"strings"
 	"sync"
 	"time"
 
-	"github.com/VictoriaMetrics/VictoriaMetrics/app/vmctl/auth"
 	"github.com/VictoriaMetrics/metrics"
 
 	"github.com/VictoriaMetrics/VictoriaMetrics/app/vmctl/backoff"
@@ -29,8 +27,6 @@ type Config struct {
 	//   --httpListenAddr value for single node version
 	//   --httpListenAddr value of vmselect  component for cluster version
 	Addr string
-
-	AuthCfg *auth.Config
 	// Transport allows specifying custom http.Transport
 	Transport *http.Transport
 	// Concurrency defines number of worker
@@ -44,6 +40,10 @@ type Config struct {
 	// BatchSize defines how many samples
 	// importer collects before sending the import request
 	BatchSize int
+	// User name for basic auth
+	User string
+	// Password for basic auth
+	Password string
 	// SignificantFigures defines the number of significant figures to leave
 	// in metric values before importing.
 	// Zero value saves all the significant decimal places
@@ -65,10 +65,11 @@ type Config struct {
 // see https://docs.victoriametrics.com/victoriametrics/single-server-victoriametrics/#how-to-import-time-series-data
 type Importer struct {
 	addr       string
-	authCfg    *auth.Config
 	client     *http.Client
 	importPath string
 	compress   bool
+	user       string
+	password   string
 
 	close  chan struct{}
 	input  chan *TimeSeries
@@ -112,7 +113,7 @@ func AddExtraLabelsToImportPath(path string, extraLabels []string) (string, erro
 		if strings.Contains(dst, "?") {
 			separator = "&"
 		}
-		dst += fmt.Sprintf("%sextra_label=%s", separator, url.QueryEscape(extraLabel))
+		dst += fmt.Sprintf("%sextra_label=%s", separator, extraLabel)
 	}
 	return dst, nil
 }
@@ -147,7 +148,8 @@ func NewImporter(ctx context.Context, cfg Config) (*Importer, error) {
 		client:     client,
 		importPath: importPath,
 		compress:   cfg.Compress,
-		authCfg:    cfg.AuthCfg,
+		user:       cfg.User,
+		password:   cfg.Password,
 		rl:         limiter.NewLimiter(cfg.RateLimit),
 		close:      make(chan struct{}),
 		input:      make(chan *TimeSeries, cfg.Concurrency*4),
@@ -161,7 +163,7 @@ func NewImporter(ctx context.Context, cfg Config) (*Importer, error) {
 		importDuration:            metrics.GetOrCreateHistogram(`vmctl_importer_request_duration_seconds`),
 	}
 	if err := im.Ping(); err != nil {
-		return nil, fmt.Errorf("ping to %q failed: %w", addr, err)
+		return nil, fmt.Errorf("ping to %q failed: %s", addr, err)
 	}
 
 	if cfg.BatchSize < 1 {
@@ -287,7 +289,7 @@ func (im *Importer) flush(ctx context.Context, b []*TimeSeries) error {
 	retryableFunc := func() error { return im.Import(b) }
 	attempts, err := im.backoff.Retry(ctx, retryableFunc)
 	if err != nil {
-		return fmt.Errorf("import failed with %d retries: %w", attempts, err)
+		return fmt.Errorf("import failed with %d retries: %s", attempts, err)
 	}
 	im.s.Lock()
 	im.s.retries = attempts
@@ -300,10 +302,10 @@ func (im *Importer) Ping() error {
 	url := fmt.Sprintf("%s/health", im.addr)
 	req, err := http.NewRequest(http.MethodGet, url, nil)
 	if err != nil {
-		return fmt.Errorf("cannot create request to %q: %w", im.addr, err)
+		return fmt.Errorf("cannot create request to %q: %s", im.addr, err)
 	}
-	if im.authCfg != nil {
-		im.authCfg.SetHeaders(req, true)
+	if im.user != "" {
+		req.SetBasicAuth(im.user, im.password)
 	}
 	resp, err := im.client.Do(req)
 	if err != nil {
@@ -330,10 +332,10 @@ func (im *Importer) Import(tsBatch []*TimeSeries) error {
 	req, err := http.NewRequest(http.MethodPost, im.importPath, pr)
 	if err != nil {
 		im.importRequestsErrorsTotal.Inc()
-		return fmt.Errorf("cannot create request to %q: %w", im.addr, err)
+		return fmt.Errorf("cannot create request to %q: %s", im.addr, err)
 	}
-	if im.authCfg != nil {
-		im.authCfg.SetHeaders(req, true)
+	if im.user != "" {
+		req.SetBasicAuth(im.user, im.password)
 	}
 	if im.compress {
 		req.Header.Set("Content-Encoding", "gzip")
@@ -350,7 +352,7 @@ func (im *Importer) Import(tsBatch []*TimeSeries) error {
 		zw, err := gzip.NewWriterLevel(w, 1)
 		if err != nil {
 			im.importRequestsErrorsTotal.Inc()
-			return fmt.Errorf("unexpected error when creating gzip writer: %w", err)
+			return fmt.Errorf("unexpected error when creating gzip writer: %s", err)
 		}
 		w = zw
 	}
@@ -409,7 +411,7 @@ var ErrBadRequest = errors.New("bad request")
 func (im *Importer) do(req *http.Request) error {
 	resp, err := im.client.Do(req)
 	if err != nil {
-		return fmt.Errorf("unexpected error when performing request: %w", err)
+		return fmt.Errorf("unexpected error when performing request: %s", err)
 	}
 	defer func() {
 		_ = resp.Body.Close()
@@ -417,7 +419,7 @@ func (im *Importer) do(req *http.Request) error {
 	if resp.StatusCode != http.StatusNoContent {
 		body, err := io.ReadAll(resp.Body)
 		if err != nil {
-			return fmt.Errorf("failed to read response body for status code %d: %w", resp.StatusCode, err)
+			return fmt.Errorf("failed to read response body for status code %d: %s", resp.StatusCode, err)
 		}
 		if resp.StatusCode == http.StatusBadRequest {
 			return fmt.Errorf("%w: unexpected response code %d: %s", ErrBadRequest, resp.StatusCode, string(body))

app/vmctl/vm/vm_test.go

@@ -33,14 +33,11 @@ func TestAddExtraLabelsToImportPath_Success(t *testing.T) {
 	f("/api/v1/import", nil, "/api/v1/import")
 
 	// ok one extra label
-	f("/api/v1/import", []string{"instance=host-1"}, "/api/v1/import?extra_label=instance%3Dhost-1")
+	f("/api/v1/import", []string{"instance=host-1"}, "/api/v1/import?extra_label=instance=host-1")
 
 	// ok two extra labels
-	f("/api/v1/import", []string{"instance=host-2", "job=vmagent"}, "/api/v1/import?extra_label=instance%3Dhost-2&extra_label=job%3Dvmagent")
+	f("/api/v1/import", []string{"instance=host-2", "job=vmagent"}, "/api/v1/import?extra_label=instance=host-2&extra_label=job=vmagent")
 
 	// ok two extra with exist param
-	f("/api/v1/import?timeout=50", []string{"instance=host-2", "job=vmagent"}, "/api/v1/import?timeout=50&extra_label=instance%3Dhost-2&extra_label=job%3Dvmagent")
-
-	// ok special chars in label value
-	f("/api/v1/import", []string{"team=a&b"}, "/api/v1/import?extra_label=team%3Da%26b")
+	f("/api/v1/import?timeout=50", []string{"instance=host-2", "job=vmagent"}, "/api/v1/import?timeout=50&extra_label=instance=host-2&extra_label=job=vmagent")
 }

app/vmctl/vm_native.go

@@ -55,14 +55,14 @@ func (p *vmNativeProcessor) run(ctx context.Context) error {
 
 	start, err := vmctlutil.ParseTime(p.filter.TimeStart)
 	if err != nil {
-		return fmt.Errorf("failed to parse %s, provided: %s: %w", vmNativeFilterTimeStart, p.filter.TimeStart, err)
+		return fmt.Errorf("failed to parse %s, provided: %s, error: %w", vmNativeFilterTimeStart, p.filter.TimeStart, err)
 	}
 
 	end := time.Now().In(start.Location())
 	if p.filter.TimeEnd != "" {
 		end, err = vmctlutil.ParseTime(p.filter.TimeEnd)
 		if err != nil {
-			return fmt.Errorf("failed to parse %s, provided: %s: %w", vmNativeFilterTimeEnd, p.filter.TimeEnd, err)
+			return fmt.Errorf("failed to parse %s, provided: %s, error: %w", vmNativeFilterTimeEnd, p.filter.TimeEnd, err)
 		}
 	}
 
@@ -91,7 +91,7 @@ func (p *vmNativeProcessor) run(ctx context.Context) error {
 		err := p.runBackfilling(ctx, tenantID, ranges)
 		if err != nil {
 			migrationErrorsTotal.Inc()
-			return fmt.Errorf("migration failed: %w", err)
+			return fmt.Errorf("migration failed: %s", err)
 		}
 
 		if p.interCluster {
@@ -157,7 +157,7 @@ func (p *vmNativeProcessor) runSingle(ctx context.Context, f native.Filter, srcU
 			}
 		default:
 		}
-		return fmt.Errorf("failed to write into %q: %w", p.dst.Addr, err)
+		return fmt.Errorf("failed to write into %q: %s", p.dst.Addr, err)
 	}
 
 	p.s.Lock()
@@ -184,7 +184,7 @@ func (p *vmNativeProcessor) runBackfilling(ctx context.Context, tenantID string,
 
 	importAddr, err := vm.AddExtraLabelsToImportPath(importAddr, p.dst.ExtraLabels)
 	if err != nil {
-		return fmt.Errorf("failed to add labels to import path: %w", err)
+		return fmt.Errorf("failed to add labels to import path: %s", err)
 	}
 	dstURL := fmt.Sprintf("%s/%s", p.dst.Addr, importAddr)
 
@@ -222,7 +222,7 @@ func (p *vmNativeProcessor) runBackfilling(ctx context.Context, tenantID string,
 		format = fmt.Sprintf(nativeWithBackoffTpl, barPrefix)
 		metricsMap, err = p.explore(ctx, p.src, tenantID, ranges)
 		if err != nil {
-			return fmt.Errorf("failed to explore metric names: %w", err)
+			return fmt.Errorf("failed to explore metric names: %s", err)
 		}
 		if len(metricsMap) == 0 {
 			errMsg := "no metrics found"
@@ -295,7 +295,7 @@ func (p *vmNativeProcessor) runBackfilling(ctx context.Context, tenantID string,
 			case <-ctx.Done():
 				return fmt.Errorf("context canceled")
 			case infErr := <-errCh:
-				return fmt.Errorf("export/import error: %w", infErr)
+				return fmt.Errorf("export/import error: %s", infErr)
 			case filterCh <- native.Filter{
 				Match:     match,
 				TimeStart: times[0].Format(time.RFC3339),
@@ -313,7 +313,7 @@ func (p *vmNativeProcessor) runBackfilling(ctx context.Context, tenantID string,
 	close(errCh)
 
 	for err := range errCh {
-		return fmt.Errorf("import process failed: %w", err)
+		return fmt.Errorf("import process failed: %s", err)
 	}
 
 	return nil
@@ -405,16 +405,7 @@ func buildMatchWithFilter(filter string, metricName string) (string, error) {
 			if len(tf.Key) == 0 {
 				continue
 			}
-			switch {
-			case tf.IsNegative && tf.IsRegexp:
-				a = append(a, fmt.Sprintf("%s!~%q", tf.Key, tf.Value))
-			case tf.IsNegative:
-				a = append(a, fmt.Sprintf("%s!=%q", tf.Key, tf.Value))
-			case tf.IsRegexp:
-				a = append(a, fmt.Sprintf("%s=~%q", tf.Key, tf.Value))
-			default:
-				a = append(a, fmt.Sprintf("%s=%q", tf.Key, tf.Value))
-			}
+			a = append(a, tf.String())
 		}
 		a = append(a, nameFilter)
 		filters = append(filters, strings.Join(a, ","))

app/vminsert/common/insert_ctx.go

@@ -175,19 +175,13 @@ func (ctx *InsertCtx) WriteMetadata(mmpbs []prompb.MetricMetadata) error {
 	}
 	mms := ctx.mms
 	mms = slicesutil.SetLength(mms, len(mmpbs))
-	var cnt int
-	for _, mmpb := range mmpbs {
-		if timeserieslimits.IsMetricMetadataExceeding(&mmpb) {
-			continue
-		}
-		mm := &mms[cnt]
+	for idx, mmpb := range mmpbs {
+		mm := &mms[idx]
 		mm.MetricFamilyName = bytesutil.ToUnsafeBytes(mmpb.MetricFamilyName)
 		mm.Help = bytesutil.ToUnsafeBytes(mmpb.Help)
 		mm.Type = mmpb.Type
 		mm.Unit = bytesutil.ToUnsafeBytes(mmpb.Unit)
-		cnt++
 	}
-	mms = mms[:cnt]
 	ctx.mms = mms
 
 	err := vmstorage.VMInsertAPI.WriteMetadata(mms)
@@ -207,19 +201,14 @@ func (ctx *InsertCtx) WritePromMetadata(mmps []prometheus.Metadata) error {
 	}
 	mms := ctx.mms
 	mms = slicesutil.SetLength(mms, len(mmps))
-	var cnt int
-	for _, mmpb := range mmps {
-		mm := &mms[cnt]
-		if timeserieslimits.IsPrometheusMetadataExceeding(&mmpb) {
-			continue
-		}
+	for idx, mmpb := range mmps {
+		mm := &mms[idx]
 		mm.MetricFamilyName = bytesutil.ToUnsafeBytes(mmpb.Metric)
 		mm.Help = bytesutil.ToUnsafeBytes(mmpb.Help)
 		mm.Type = mmpb.Type
-		cnt++
 	}
-	mms = mms[:cnt]
 	ctx.mms = mms
+
 	err := vmstorage.VMInsertAPI.WriteMetadata(mms)
 	if err != nil {
 		return &httpserver.ErrorWithStatusCode{

app/vminsert/influx/request_handler.go

@@ -49,7 +49,7 @@ func InsertHandlerForHTTP(req *http.Request) error {
 	}
 	q := req.URL.Query()
 	precision := q.Get("precision")
-	// Read db tag from https://docs.influxdata.com/influxdb/v1/api/write/#operation/PostWrite
+	// Read db tag from https://docs.influxdata.com/influxdb/v1.7/tools/api/#write-http-endpoint
 	db := q.Get("db")
 	encoding := req.Header.Get("Content-Encoding")
 	isStreamMode := req.Header.Get("Stream-Mode") == "1"

app/vminsert/main.go

@@ -68,11 +68,9 @@ var (
 		"at -opentsdbHTTPListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt")
 	configAuthKey          = flagutil.NewPassword("configAuthKey", "Authorization key for accessing /config page. It must be passed via authKey query arg. It overrides -httpAuth.*")
 	reloadAuthKey          = flagutil.NewPassword("reloadAuthKey", "Auth key for /-/reload http endpoint. It must be passed via authKey query arg. It overrides httpAuth.* settings.")
-	maxLabelsPerTimeseries = flag.Int("maxLabelsPerTimeseries", 40, "The maximum number of labels per time series to be accepted. Series with superfluous labels are ignored. In this case the vm_rows_ignored_total{reason=\"too_many_labels\"} metric at /metrics page is incremented.")
-	maxLabelNameLen        = flag.Int("maxLabelNameLen", 256, "The maximum length of label name in the accepted time series. Series with longer label name are ignored. In this case the vm_rows_ignored_total{reason=\"too_long_label_name\"} metric at /metrics page is incremented. "+
-		"Value must be in range 1..65535.")
-	maxLabelValueLen = flag.Int("maxLabelValueLen", 4*1024, "The maximum length of label values in the accepted time series. Series with longer label value are ignored. In this case the vm_rows_ignored_total{reason=\"too_long_label_value\"} metric at /metrics page is incremented. "+
-		"Value must be in range 1..65535.")
+	maxLabelsPerTimeseries = flag.Int("maxLabelsPerTimeseries", 40, "The maximum number of labels per time series to be accepted. Series with superfluous labels are ignored. In this case the vm_rows_ignored_total{reason=\"too_many_labels\"} metric at /metrics page is incremented")
+	maxLabelNameLen        = flag.Int("maxLabelNameLen", 256, "The maximum length of label name in the accepted time series. Series with longer label name are ignored. In this case the vm_rows_ignored_total{reason=\"too_long_label_name\"} metric at /metrics page is incremented")
+	maxLabelValueLen       = flag.Int("maxLabelValueLen", 4*1024, "The maximum length of label values in the accepted time series. Series with longer label value are ignored. In this case the vm_rows_ignored_total{reason=\"too_long_label_value\"} metric at /metrics page is incremented")
 )
 
 var (
@@ -108,7 +106,7 @@ func Init() {
 	promscrape.Init(func(_ *auth.Token, wr *prompb.WriteRequest) {
 		prompush.Push(wr)
 	})
-	timeserieslimits.MustInit(*maxLabelsPerTimeseries, *maxLabelNameLen, *maxLabelValueLen)
+	timeserieslimits.Init(*maxLabelsPerTimeseries, *maxLabelNameLen, *maxLabelValueLen)
 }
 
 // Stop stops vminsert.

app/vmselect/main.go

@@ -6,6 +6,8 @@ import (
 	"flag"
 	"fmt"
 	"net/http"
+	nethttputil "net/http/httputil"
+	"net/url"
 	"strings"
 	"time"
 
@@ -27,7 +29,6 @@ import (
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/promscrape"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/querytracer"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/timerpool"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/vmalertproxy"
 )
 
 var (
@@ -37,10 +38,7 @@ var (
 	resetCacheAuthKey    = flagutil.NewPassword("search.resetCacheAuthKey", "Optional authKey for resetting rollup cache via /internal/resetRollupResultCache call. It could be passed via authKey query arg. It overrides -httpAuth.*")
 	logSlowQueryDuration = flag.Duration("search.logSlowQueryDuration", 5*time.Second, "Log queries with execution time exceeding this value. Zero disables slow query logging. "+
 		"See also -search.logQueryMemoryUsage")
-
-	vmalertProxyURL = flag.String("vmalert.proxyURL", "", "Optional URL for proxying requests to vmalert. For example, if -vmalert.proxyURL=http://vmalert:8880 , "+
-		"then alerting API requests such as /api/v1/rules from Grafana will be proxied to http://vmalert:8880/api/v1/rules . "+
-		"See https://docs.victoriametrics.com/victoriametrics/single-server-victoriametrics/#vmalert")
+	vmalertProxyURL = flag.String("vmalert.proxyURL", "", "Optional URL for proxying requests to vmalert. For example, if -vmalert.proxyURL=http://vmalert:8880 , then alerting API requests such as /api/v1/rules from Grafana will be proxied to http://vmalert:8880/api/v1/rules")
 )
 
 var slowQueries = metrics.NewCounter(`vm_slow_queries_total`)
@@ -57,8 +55,8 @@ func Init(vmselectMaxConcurrentRequests int, vmselectMaxQueueDuration time.Durat
 	concurrencyLimitCh = make(chan struct{}, maxConcurrentRequests)
 
 	initVMUIConfig()
+	initVMAlertProxy()
 
-	vmalertproxy.Init(*vmalertProxyURL)
 	flagutil.RegisterSecretFlag("vmalert.proxyURL")
 }
 
@@ -369,10 +367,6 @@ func RequestHandler(w http.ResponseWriter, r *http.Request) bool {
 		}
 		return true
 	case "/tags/delSeries":
-		if r.Method != "POST" {
-			http.Error(w, fmt.Sprintf("Only POST method is allowed. Got %s.", r.Method), http.StatusMethodNotAllowed)
-			return true
-		}
 		if !httpserver.CheckAuthFlag(w, r, deleteAuthKey) {
 			return true
 		}
@@ -392,10 +386,6 @@ func RequestHandler(w http.ResponseWriter, r *http.Request) bool {
 		}
 		return true
 	case "/api/v1/admin/tsdb/delete_series":
-		if r.Method != "POST" {
-			http.Error(w, fmt.Sprintf("Only POST method is allowed. Got %s.", r.Method), http.StatusMethodNotAllowed)
-			return true
-		}
 		if !httpserver.CheckAuthFlag(w, r, deleteAuthKey) {
 			return true
 		}
@@ -524,11 +514,10 @@ func handleStaticAndSimpleRequests(w http.ResponseWriter, r *http.Request, path
 		if len(*vmalertProxyURL) == 0 {
 			w.WriteHeader(http.StatusBadRequest)
 			w.Header().Set("Content-Type", "application/json")
-			fmt.Fprintf(w, "%s", `{"status":"error","msg":"the '-vmalert.proxyURL' command-line must be configured; `+
-				`see https://docs.victoriametrics.com/victoriametrics/single-server-victoriametrics/#vmalert"}`)
+			fmt.Fprintf(w, "%s", `{"status":"error","msg":"for accessing vmalert flag '-vmalert.proxyURL' must be configured"}`)
 			return true
 		}
-		vmalertproxy.HandleRequest(w, r, path)
+		proxyVMAlertRequests(w, r, path)
 		return true
 	}
 
@@ -549,7 +538,7 @@ func handleStaticAndSimpleRequests(w http.ResponseWriter, r *http.Request, path
 		return true
 	case "/metric-relabel-debug":
 		promscrapeMetricRelabelDebugRequests.Inc()
-		promscrape.WriteMetricRelabelDebug(w, r, "", nil)
+		promscrape.WriteMetricRelabelDebug(w, r)
 		return true
 	case "/target-relabel-debug":
 		promscrapeTargetRelabelDebugRequests.Inc()
@@ -566,7 +555,7 @@ func handleStaticAndSimpleRequests(w http.ResponseWriter, r *http.Request, path
 	case "/api/v1/rules", "/rules":
 		rulesRequests.Inc()
 		if len(*vmalertProxyURL) > 0 {
-			vmalertproxy.HandleRequest(w, r, path)
+			proxyVMAlertRequests(w, r, path)
 			return true
 		}
 		// Return dumb placeholder for https://prometheus.io/docs/prometheus/latest/querying/api/#rules
@@ -576,7 +565,7 @@ func handleStaticAndSimpleRequests(w http.ResponseWriter, r *http.Request, path
 	case "/api/v1/alerts", "/alerts":
 		alertsRequests.Inc()
 		if len(*vmalertProxyURL) > 0 {
-			vmalertproxy.HandleRequest(w, r, path)
+			proxyVMAlertRequests(w, r, path)
 			return true
 		}
 		// Return dumb placeholder for https://prometheus.io/docs/prometheus/latest/querying/api/#alerts
@@ -586,7 +575,7 @@ func handleStaticAndSimpleRequests(w http.ResponseWriter, r *http.Request, path
 	case "/api/v1/notifiers", "/notifiers":
 		notifiersRequests.Inc()
 		if len(*vmalertProxyURL) > 0 {
-			vmalertproxy.HandleRequest(w, r, path)
+			proxyVMAlertRequests(w, r, path)
 			return true
 		}
 		w.Header().Set("Content-Type", "application/json")
@@ -733,7 +722,48 @@ var (
 	metricNamesStatsResetErrors   = metrics.NewCounter(`vm_http_request_errors_total{path="/api/v1/admin/status/metric_names_stats/reset"}`)
 )
 
-var vmuiConfig string
+func proxyVMAlertRequests(w http.ResponseWriter, r *http.Request, path string) {
+	defer func() {
+		err := recover()
+		if err == nil || err == http.ErrAbortHandler {
+			// Suppress http.ErrAbortHandler panic.
+			// See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1353
+			return
+		}
+		// Forward other panics to the caller.
+		panic(err)
+	}()
+	req := r.Clone(r.Context())
+	req.URL.Path = strings.TrimPrefix(path, "prometheus")
+	req.Host = vmalertProxyHost
+
+	if strings.HasPrefix(r.Header.Get(`User-Agent`), `Grafana`) {
+		// Grafana currently supports only Prometheus-style alerts. If other alert types
+		// (e.g. logs or traces) are returned, it may fail with "Error loading alerts".
+		//
+		// Grafana queries the vmalert API directly, bypassing the VictoriaMetrics datasource,
+		// so query params (such as datasource_type) cannot be enforced on the Grafana side.
+		//
+		// To ensure compatibility, we detect Grafana requests via the User-Agent and enforce
+		// `datasource_type=prometheus`.
+		//
+		// See:
+		// - https://github.com/VictoriaMetrics/victoriametrics-datasource/issues/329#issuecomment-3847585443
+		// - https://github.com/VictoriaMetrics/victoriametrics-datasource/issues/59
+		q := req.URL.Query()
+		q.Set("datasource_type", "prometheus")
+		req.URL.RawQuery = q.Encode()
+		req.RequestURI = ""
+	}
+
+	vmalertProxy.ServeHTTP(w, req)
+}
+
+var (
+	vmalertProxyHost string
+	vmalertProxy     *nethttputil.ReverseProxy
+	vmuiConfig       string
+)
 
 func initVMUIConfig() {
 	var cfg struct {
@@ -765,3 +795,16 @@ func initVMUIConfig() {
 	}
 	vmuiConfig = string(data)
 }
+
+// initVMAlertProxy must be called after flag.Parse(), since it uses command-line flags.
+func initVMAlertProxy() {
+	if len(*vmalertProxyURL) == 0 {
+		return
+	}
+	proxyURL, err := url.Parse(*vmalertProxyURL)
+	if err != nil {
+		logger.Fatalf("cannot parse -vmalert.proxyURL=%q: %s", *vmalertProxyURL, err)
+	}
+	vmalertProxyHost = proxyURL.Host
+	vmalertProxy = nethttputil.NewSingleHostReverseProxy(proxyURL)
+}

app/vmselect/prometheus/metadata_response.qtpl

@@ -15,7 +15,7 @@ See https://prometheus.io/docs/prometheus/latest/querying/api/#querying-metric-m
 			currentItem := 0
 		 %}
 		{% for _, row := range result %}
-			{%q= string(row.MetricFamilyName) %}: [
+			"{%s string(row.MetricFamilyName) %}": [
 					{
 						"type": {%q= row.Type.String() %},
             {% if len(row.Unit) > 0 -%}

app/vmselect/prometheus/metadata_response.qtpl.go

@@ -35,10 +35,12 @@ func StreamMetadataResponse(qw422016 *qt422016.Writer, result []*metricsmetadata
 
 //line app/vmselect/prometheus/metadata_response.qtpl:17
 	for _, row := range result {
+//line app/vmselect/prometheus/metadata_response.qtpl:17
+		qw422016.N().S(`"`)
 //line app/vmselect/prometheus/metadata_response.qtpl:18
-		qw422016.N().Q(string(row.MetricFamilyName))
+		qw422016.E().S(string(row.MetricFamilyName))
 //line app/vmselect/prometheus/metadata_response.qtpl:18
-		qw422016.N().S(`: [{"type":`)
+		qw422016.N().S(`": [{"type":`)
 //line app/vmselect/prometheus/metadata_response.qtpl:20
 		qw422016.N().Q(row.Type.String())
 //line app/vmselect/prometheus/metadata_response.qtpl:20

app/vmselect/prometheus/prometheus.go

@@ -28,7 +28,6 @@ import (
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/fasttime"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/httputil"
-	"github.com/VictoriaMetrics/VictoriaMetrics/lib/logger"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/netutil"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/querytracer"
 	"github.com/VictoriaMetrics/VictoriaMetrics/lib/storage"
@@ -526,7 +525,6 @@ func DeleteHandler(startTime time.Time, r *http.Request) error {
 	if deletedCount > 0 {
 		promql.ResetRollupResultCache()
 	}
-	logger.Infof("/api/v1/admin/tsdb/delete_series has been called for %q. Deleted %d series.", sq.FiltersString(), deletedCount)
 	return nil
 }
 
@@ -956,7 +954,6 @@ func queryRangeHandler(qt *querytracer.Tracer, startTime time.Time, w http.Respo
 	start, end, step int64, r *http.Request, ct int64, etfs [][]storage.TagFilter) error {
 	deadline := searchutil.GetDeadlineForQuery(r, startTime)
 	mayCache := !httputil.GetBool(r, "nocache")
-	optimizeRepeatedBinaryOpSubexprs := httputil.GetBool(r, "optimize_repeated_binary_op_subexprs")
 	lookbackDelta, err := getMaxLookback(r)
 	if err != nil {
 		return err
@@ -978,19 +975,18 @@ func queryRangeHandler(qt *querytracer.Tracer, startTime time.Time, w http.Respo
 	}
 
 	ec := &promql.EvalConfig{
-		Start:                            start,
-		End:                              end,
-		Step:                             step,
-		MaxPointsPerSeries:               *maxPointsPerTimeseries,
-		MaxSeries:                        0, // let vmstorage use maxUniqueTimeseries by default
-		QuotedRemoteAddr:                 httpserver.GetQuotedRemoteAddr(r),
-		Deadline:                         deadline,
-		MayCache:                         mayCache,
-		OptimizeRepeatedBinaryOpSubexprs: optimizeRepeatedBinaryOpSubexprs,
-		LookbackDelta:                    lookbackDelta,
-		RoundDigits:                      getRoundDigits(r),
-		EnforcedTagFilterss:              etfs,
-		CacheTagFilters:                  etfs,
+		Start:               start,
+		End:                 end,
+		Step:                step,
+		MaxPointsPerSeries:  *maxPointsPerTimeseries,
+		MaxSeries:           0, // let vmstorage use maxUniqueTimeseries by default
+		QuotedRemoteAddr:    httpserver.GetQuotedRemoteAddr(r),
+		Deadline:            deadline,
+		MayCache:            mayCache,
+		LookbackDelta:       lookbackDelta,
+		RoundDigits:         getRoundDigits(r),
+		EnforcedTagFilterss: etfs,
+		CacheTagFilters:     etfs,
 		GetRequestURI: func() string {
 			return httpserver.GetRequestURI(r)
 		},

app/vmselect/promql/binary_op.go

@@ -164,21 +164,15 @@ func newBinaryOpFunc(bf func(left, right float64, isBool bool) float64) binaryOp
 		left := bfa.left
 		right := bfa.right
 		op := bfa.be.Op
-		isCmpOp := metricsql.IsBinaryOpCmp(op)
-		if !isCmpOp {
-			// Do not remove empty series for comparison operations, since NaN can be an
-			// explicitly present sample value. In particular, `value != NaN` is true.
-			// See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/150.
+		switch true {
+		case metricsql.IsBinaryOpCmp(op):
+			// Do not remove empty series for comparison operations,
+			// since this may lead to missing result.
+		default:
 			left = removeEmptySeries(left)
 			right = removeEmptySeries(right)
 		}
-		if len(left) == 0 && len(right) == 0 {
-			return nil, nil
-		}
-		if len(left) == 0 && bfa.be.FillLeft == nil {
-			return nil, nil
-		}
-		if len(right) == 0 && bfa.be.FillRight == nil {
+		if len(left) == 0 || len(right) == 0 {
 			return nil, nil
 		}
 		left, right, dst, err := adjustBinaryOpTags(bfa.be, left, right)
@@ -189,16 +183,6 @@ func newBinaryOpFunc(bf func(left, right float64, isBool bool) float64) binaryOp
 			logger.Panicf("BUG: len(left) must match len(right) and len(dst); got %d vs %d vs %d", len(left), len(right), len(dst))
 		}
 		isBool := bfa.be.Bool
-		fillLeft := bfa.be.FillLeft
-		fillRight := bfa.be.FillRight
-		// A NaN produced by a vector comparison denotes a filtered-out sample rather
-		// than an explicitly present NaN value. Drop it when this result is used as
-		// the right-hand side of another comparison.
-		// Note that filtered-out samples surviving as NaN inside other wrappers such as
-		// transform functions or arithmetic operations aren't detected, since such NaN
-		// is indistinguishable from an explicitly present NaN value there.
-		// See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/10018.
-		dropNaNRight := isCmpOp && isVectorComparisonExpr(bfa.be.Right)
 		for i, tsLeft := range left {
 			leftValues := tsLeft.Values
 			rightValues := right[i].Values
@@ -209,24 +193,6 @@ func newBinaryOpFunc(bf func(left, right float64, isBool bool) float64) binaryOp
 			}
 			for j, a := range leftValues {
 				b := rightValues[j]
-				leftIsNaN := math.IsNaN(a)
-				rightIsNaN := math.IsNaN(b)
-				// Both sides are NaN.
-				if leftIsNaN && rightIsNaN {
-					dstValues[j] = bf(a, b, isBool)
-					continue
-				}
-				if dropNaNRight && rightIsNaN && fillRight == nil {
-					dstValues[j] = nan
-					continue
-				}
-				// Apply the fill value when either the left or right side is NaN, but not both.
-				if leftIsNaN && fillLeft != nil {
-					a = fillLeft.N
-				}
-				if rightIsNaN && fillRight != nil {
-					b = fillRight.N
-				}
 				dstValues[j] = bf(a, b, isBool)
 			}
 		}
@@ -236,38 +202,6 @@ func newBinaryOpFunc(bf func(left, right float64, isBool bool) float64) binaryOp
 	}
 }
 
-// isVectorComparisonExpr returns whether e is a comparison operation
-// with at least one non-scalar operand.
-func isVectorComparisonExpr(e metricsql.Expr) bool {
-	if re, ok := e.(*metricsql.RollupExpr); ok && re.Window == nil {
-		// Unwrap `(...) offset <d>` and `(...) @ <t>`, which do not change
-		// the shape of the result. Subqueries are left as is, since rollup
-		// functions skip NaN values on their own.
-		e = re.Expr
-	}
-	be, ok := e.(*metricsql.BinaryOpExpr)
-	if !ok || !metricsql.IsBinaryOpCmp(be.Op) {
-		return false
-	}
-	return !isScalarLikeExpr(be.Left) || !isScalarLikeExpr(be.Right)
-}
-
-// isScalarLikeExpr returns whether e always evaluates to a scalar value.
-func isScalarLikeExpr(e metricsql.Expr) bool {
-	switch e := e.(type) {
-	case *metricsql.NumberExpr, *metricsql.DurationExpr:
-		return true
-	case *metricsql.BinaryOpExpr:
-		return isScalarLikeExpr(e.Left) && isScalarLikeExpr(e.Right)
-	case *metricsql.FuncExpr:
-		switch strings.ToLower(e.Name) {
-		case "now", "pi", "scalar", "start", "end", "step", "time", "timezone_offset":
-			return true
-		}
-	}
-	return false
-}
-
 func adjustBinaryOpTags(be *metricsql.BinaryOpExpr, left, right []*timeseries) ([]*timeseries, []*timeseries, []*timeseries, error) {
 	if len(be.GroupModifier.Op) == 0 && len(be.JoinModifier.Op) == 0 {
 		if isScalar(left) {
@@ -292,7 +226,7 @@ func adjustBinaryOpTags(be *metricsql.BinaryOpExpr, left, right []*timeseries) (
 		}
 	}
 
-	// Slow path: `vector op vector` or `a op {on|ignoring} {group_left|group_right} {fill|fill_left|fill_right} b`
+	// Slow path: `vector op vector` or `a op {on|ignoring} {group_left|group_right} b`
 	var rvsLeft, rvsRight []*timeseries
 	mLeft, mRight := createTimeseriesMapByTagSet(be, left, right)
 	joinOp := strings.ToLower(be.JoinModifier.Op)
@@ -305,27 +239,10 @@ func adjustBinaryOpTags(be *metricsql.BinaryOpExpr, left, right []*timeseries) (
 		// Add __name__ to groupTags if metric name must be preserved.
 		groupTags = append(groupTags[:len(groupTags):len(groupTags)], "__name__")
 	}
-	// Add missing keys from mRight to mLeft when fill_left()/fill() modifier is used
-	if be.FillLeft != nil {
-		for k := range mRight {
-			if _, ok := mLeft[k]; !ok {
-				mLeft[k] = nil
-			}
-		}
-	}
 	for k, tssLeft := range mLeft {
 		tssRight := mRight[k]
-		if len(tssLeft) == 0 {
-			if be.FillLeft == nil {
-				logger.Panicf("BUG: unexpected empty tssLeft for key %q when FillLeft is nil", k)
-			}
-			tssLeft = []*timeseries{newFillTimeseries(be, tssRight[0])}
-		}
 		if len(tssRight) == 0 {
-			if be.FillRight == nil {
-				continue
-			}
-			tssRight = []*timeseries{newFillTimeseries(be, tssLeft[0])}
+			continue
 		}
 		switch joinOp {
 		case "group_left":
@@ -370,28 +287,6 @@ func adjustBinaryOpTags(be *metricsql.BinaryOpExpr, left, right []*timeseries) (
 	return rvsLeft, rvsRight, dst, nil
 }
 
-// newFillTimeseries returns a time series filled with NaN values for the fill_left()/fill_right()/fill() modifiers.
-// These NaN values will be replaced later with the fill value if needed.
-func newFillTimeseries(be *metricsql.BinaryOpExpr, src *timeseries) *timeseries {
-	var ts timeseries
-	ts.CopyFromShallowTimestamps(src)
-	if !be.KeepMetricNames {
-		ts.MetricName.ResetMetricGroup()
-	}
-	groupTags := be.GroupModifier.Args
-	switch strings.ToLower(be.GroupModifier.Op) {
-	case "on":
-		ts.MetricName.RemoveTagsOn(groupTags)
-	default:
-		ts.MetricName.RemoveTagsIgnoring(groupTags)
-	}
-	values := ts.Values
-	for i := range values {
-		values[i] = math.NaN()
-	}
-	return &ts
-}
-
 func ensureSingleTimeseries(side string, be *metricsql.BinaryOpExpr, tss []*timeseries) error {
 	if len(tss) == 0 {
 		logger.Panicf("BUG: tss must contain at least one value")

app/vmselect/promql/eval.go

@@ -132,9 +132,6 @@ type EvalConfig struct {
 	// Whether the response can be cached.
 	MayCache bool
 
-	// Whether repeated cacheable binary op subexpressions can be optimized.
-	OptimizeRepeatedBinaryOpSubexprs bool
-
 	// LookbackDelta is analog to `-query.lookback-delta` from Prometheus.
 	LookbackDelta int64
 
@@ -174,7 +171,6 @@ func copyEvalConfig(src *EvalConfig) *EvalConfig {
 	ec.MaxPointsPerSeries = src.MaxPointsPerSeries
 	ec.Deadline = src.Deadline
 	ec.MayCache = src.MayCache
-	ec.OptimizeRepeatedBinaryOpSubexprs = src.OptimizeRepeatedBinaryOpSubexprs
 	ec.LookbackDelta = src.LookbackDelta
 	ec.RoundDigits = src.RoundDigits
 	ec.EnforcedTagFilterss = src.EnforcedTagFilterss
@@ -424,7 +420,18 @@ func evalBinaryOp(qt *querytracer.Tracer, ec *EvalConfig, be *metricsql.BinaryOp
 	if bf == nil {
 		return nil, fmt.Errorf(`unknown binary op %q`, be.Op)
 	}
-	tssLeft, tssRight, err := execBinaryOpArgs(qt, ec, be)
+	var err error
+	var tssLeft, tssRight []*timeseries
+	switch strings.ToLower(be.Op) {
+	case "and", "if":
+		// Fetch right-side series at first, since it usually contains
+		// lower number of time series for `and` and `if` operator.
+		// This should produce more specific label filters for the left side of the query.
+		// This, in turn, should reduce the time to select series for the left side of the query.
+		tssRight, tssLeft, err = execBinaryOpArgs(qt, ec, be.Right, be.Left, be)
+	default:
+		tssLeft, tssRight, err = execBinaryOpArgs(qt, ec, be.Left, be.Right, be)
+	}
 	if err != nil {
 		return nil, fmt.Errorf("cannot execute %q: %w", be.AppendString(nil), err)
 	}
@@ -440,29 +447,6 @@ func evalBinaryOp(qt *querytracer.Tracer, ec *EvalConfig, be *metricsql.BinaryOp
 	return rv, nil
 }
 
-// binaryOpEvalOrder might change the order of evaluation of the left and right sides of a binary operation,
-// when there is chance to push down common label filters from exprFirst to exprSecond in the following executions.
-func binaryOpEvalOrder(be *metricsql.BinaryOpExpr) (exprFirst, exprSecond metricsql.Expr) {
-	exprFirst, exprSecond = be.Left, be.Right
-	switch strings.ToLower(be.Op) {
-	case "and", "if":
-		// For `and` and `if`, fetch the right-side series first, since it usually contains
-		// fewer time series and yields more specific filters for the left side.
-		exprFirst, exprSecond = be.Right, be.Left
-	}
-	if be.FillLeft != nil && be.FillRight == nil {
-		// For `fill_left(<value>)`, the unmatched series can only come from the right side, so evaluate it first.
-		exprFirst, exprSecond = be.Right, be.Left
-	}
-	return exprFirst, exprSecond
-}
-
-// canPushdownCommonFilters decides if common label filters can be pushed down from one side of a binary operation to the other.
-//
-// Common filters cannot be pushed down when:
-// - the operator is `or` or `default`;
-// - either side is an aggregation function without explicit grouping;
-// - fill(<value>) modifier is used.
 func canPushdownCommonFilters(be *metricsql.BinaryOpExpr) bool {
 	switch strings.ToLower(be.Op) {
 	case "or", "default":
@@ -471,10 +455,6 @@ func canPushdownCommonFilters(be *metricsql.BinaryOpExpr) bool {
 	if isAggrFuncWithoutGrouping(be.Left) || isAggrFuncWithoutGrouping(be.Right) {
 		return false
 	}
-	// Filters cannot be propagated when fill(<value>) modifier is used.
-	if be.FillLeft != nil && be.FillRight != nil {
-		return false
-	}
 	return true
 }
 
@@ -486,185 +466,82 @@ func isAggrFuncWithoutGrouping(e metricsql.Expr) bool {
 	return len(afe.Modifier.Args) == 0
 }
 
-func execBinaryOpArgs(qt *querytracer.Tracer, ec *EvalConfig, be *metricsql.BinaryOpExpr) ([]*timeseries, []*timeseries, error) {
-	exprFirst, exprSecond := binaryOpEvalOrder(be)
-	firstIsLeft := exprFirst == be.Left
-	sortResult := func(tssFirst, tssSecond []*timeseries) ([]*timeseries, []*timeseries, error) {
-		if firstIsLeft {
-			return tssFirst, tssSecond, nil
-		}
-		return tssSecond, tssFirst, nil
-	}
-	if canPushdownCommonFilters(be) {
-		// Execute binary operation in the following way:
-		//
-		// 1) execute the exprFirst
-		// 2) get common label filters for series returned at step 1
-		// 3) push down the found common label filters to exprSecond. This filters out unneeded series
-		//    during exprSecond execution instead of spending compute resources on extracting and processing these series
-		//    before they are dropped later when matching time series according to https://prometheus.io/docs/prometheus/latest/querying/operators/#vector-matching
-		// 4) execute the exprSecond with possible additional filters found at step 3
-		//
-		// Typical use cases:
-		// - Kubernetes-related: show pod creation time with the node name:
-		//
-		//     kube_pod_created{namespace="prod"} * on (uid) group_left(node) kube_pod_info
-		//
-		//   Without the optimization `kube_pod_info` would select and spend compute resources
-		//   for more time series than needed. The selected time series would be dropped later
-		//   when matching time series on the right and left sides of binary operand.
-		//
-		// - Generic alerting queries, which rely on `info` metrics.
-		//   See https://grafana.com/blog/2021/08/04/how-to-use-promql-joins-for-more-effective-queries-of-prometheus-metrics-at-scale/
-		//
-		// - Queries, which get additional labels from `info` metrics.
-		//   See https://www.robustperception.io/exposing-the-software-version-to-prometheus
-		tssFirst, err := evalExpr(qt, ec, exprFirst)
-		if err != nil {
-			return nil, nil, err
-		}
-		if len(tssFirst) == 0 && !strings.EqualFold(be.Op, "or") {
-			// Fast path: there is no sense in executing the exprSecond when exprFirst returns an empty result,
-			// since the "exprFirst op exprSecond" would return an empty result in any case.
-			// See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3349
-			return nil, nil, nil
-		}
-		lfs := getCommonLabelFilters(tssFirst)
-		lfs = metricsql.TrimFiltersByGroupModifier(lfs, be)
-		exprSecond = metricsql.PushdownBinaryOpFilters(exprSecond, lfs)
-		tssSecond, err := evalExpr(qt, ec, exprSecond)
-		if err != nil {
-			return nil, nil, err
-		}
-		return sortResult(tssFirst, tssSecond)
-	}
-
-	// Execute exprFirst and exprSecond sequentially if there are cacheable repeated subexpressions
-	// in exprFirst and exprSecond.
-	// See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/10575
-	if shouldOptimizeRepeatedBinaryOpSubexprs(ec, exprFirst, exprSecond) {
-		qt = qt.NewChild("execute left and right sides of %q sequentially because repeated cacheable subexpression was found", be.Op)
+func execBinaryOpArgs(qt *querytracer.Tracer, ec *EvalConfig, exprFirst, exprSecond metricsql.Expr, be *metricsql.BinaryOpExpr) ([]*timeseries, []*timeseries, error) {
+	if !canPushdownCommonFilters(be) {
+		// Execute exprFirst and exprSecond in parallel, since it is impossible to pushdown common filters
+		// from exprFirst to exprSecond.
+		// See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2886
+		qt = qt.NewChild("execute left and right sides of %q in parallel", be.Op)
 		defer qt.Done()
+		var wg sync.WaitGroup
 
+		var tssFirst []*timeseries
+		var errFirst error
 		qtFirst := qt.NewChild("expr1")
-		tssFirst, err := evalExpr(qtFirst, ec, exprFirst)
-		qtFirst.Done()
-		if err != nil {
-			return nil, nil, err
-		}
+		wg.Go(func() {
+			tssFirst, errFirst = evalExpr(qtFirst, ec, exprFirst)
+			qtFirst.Done()
+		})
 
+		var tssSecond []*timeseries
+		var errSecond error
 		qtSecond := qt.NewChild("expr2")
-		tssSecond, err := evalExpr(qtSecond, ec, exprSecond)
-		qtSecond.Done()
-		if err != nil {
-			return nil, nil, err
+		wg.Go(func() {
+			tssSecond, errSecond = evalExpr(qtSecond, ec, exprSecond)
+			qtSecond.Done()
+		})
+
+		wg.Wait()
+		if errFirst != nil {
+			return nil, nil, errFirst
+		}
+		if errSecond != nil {
+			return nil, nil, errSecond
 		}
 		return tssFirst, tssSecond, nil
 	}
 
-	// Execute exprFirst and exprSecond in parallel, since it is impossible to pushdown common filters
-	// from exprFirst to exprSecond.
-	// See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2886
-	qt = qt.NewChild("execute left and right sides of %q in parallel", be.Op)
-	defer qt.Done()
-	var wg sync.WaitGroup
-
-	var tssFirst []*timeseries
-	var errFirst error
-	qtFirst := qt.NewChild("expr1")
-	wg.Go(func() {
-		tssFirst, errFirst = evalExpr(qtFirst, ec, exprFirst)
-		qtFirst.Done()
-	})
-
-	var tssSecond []*timeseries
-	var errSecond error
-	qtSecond := qt.NewChild("expr2")
-	wg.Go(func() {
-		tssSecond, errSecond = evalExpr(qtSecond, ec, exprSecond)
-		qtSecond.Done()
-	})
-
-	wg.Wait()
-	if errFirst != nil {
-		return nil, nil, errFirst
+	// Execute binary operation in the following way:
+	//
+	// 1) execute the exprFirst
+	// 2) get common label filters for series returned at step 1
+	// 3) push down the found common label filters to exprSecond. This filters out unneeded series
+	//    during exprSecond execution instead of spending compute resources on extracting and processing these series
+	//    before they are dropped later when matching time series according to https://prometheus.io/docs/prometheus/latest/querying/operators/#vector-matching
+	// 4) execute the exprSecond with possible additional filters found at step 3
+	//
+	// Typical use cases:
+	// - Kubernetes-related: show pod creation time with the node name:
+	//
+	//     kube_pod_created{namespace="prod"} * on (uid) group_left(node) kube_pod_info
+	//
+	//   Without the optimization `kube_pod_info` would select and spend compute resources
+	//   for more time series than needed. The selected time series would be dropped later
+	//   when matching time series on the right and left sides of binary operand.
+	//
+	// - Generic alerting queries, which rely on `info` metrics.
+	//   See https://grafana.com/blog/2021/08/04/how-to-use-promql-joins-for-more-effective-queries-of-prometheus-metrics-at-scale/
+	//
+	// - Queries, which get additional labels from `info` metrics.
+	//   See https://www.robustperception.io/exposing-the-software-version-to-prometheus
+	tssFirst, err := evalExpr(qt, ec, exprFirst)
+	if err != nil {
+		return nil, nil, err
 	}
-	if errSecond != nil {
-		return nil, nil, errSecond
+	if len(tssFirst) == 0 && !strings.EqualFold(be.Op, "or") {
+		// Fast path: there is no sense in executing the exprSecond when exprFirst returns an empty result,
+		// since the "exprFirst op exprSecond" would return an empty result in any case.
+		// See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3349
+		return nil, nil, nil
 	}
-	return sortResult(tssFirst, tssSecond)
-}
-
-func shouldOptimizeRepeatedBinaryOpSubexprs(ec *EvalConfig, exprFirst, exprSecond metricsql.Expr) bool {
-	if !ec.OptimizeRepeatedBinaryOpSubexprs {
-		return false
+	lfs := getCommonLabelFilters(tssFirst)
+	lfs = metricsql.TrimFiltersByGroupModifier(lfs, be)
+	exprSecond = metricsql.PushdownBinaryOpFilters(exprSecond, lfs)
+	tssSecond, err := evalExpr(qt, ec, exprSecond)
+	if err != nil {
+		return nil, nil, err
 	}
-	if ec.Start == ec.End {
-		return false
-	}
-	if !ec.mayCache() {
-		return false
-	}
-
-	candidatesFirst := make(map[string]struct{}, 1)
-	var b []byte
-	visitOptimizedAggrs(exprFirst, func(ae *metricsql.AggrFuncExpr) {
-		if hasUnseededVolatileFunc(ae) {
-			return
-		}
-		b = ae.AppendString(b[:0])
-		candidatesFirst[string(b)] = struct{}{}
-	})
-	if len(candidatesFirst) == 0 {
-		return false
-	}
-
-	repeated := false
-	visitOptimizedAggrs(exprSecond, func(ae *metricsql.AggrFuncExpr) {
-		if repeated {
-			return
-		}
-		b = ae.AppendString(b[:0])
-		_, repeated = candidatesFirst[string(b)]
-	})
-	return repeated
-}
-
-func visitOptimizedAggrs(e metricsql.Expr, f func(ae *metricsql.AggrFuncExpr)) {
-	metricsql.VisitAll(e, func(expr metricsql.Expr) {
-		ae, ok := expr.(*metricsql.AggrFuncExpr)
-		if !ok {
-			return
-		}
-		if getIncrementalAggrFuncCallbacks(ae.Name) == nil {
-			return
-		}
-		fe, _ := tryGetArgRollupFuncWithMetricExpr(ae)
-		if fe == nil {
-			return
-		}
-		f(ae)
-	})
-}
-
-func hasUnseededVolatileFunc(e metricsql.Expr) bool {
-	found := false
-	metricsql.VisitAll(e, func(expr metricsql.Expr) {
-		if found {
-			return
-		}
-		fe, ok := expr.(*metricsql.FuncExpr)
-		if !ok {
-			return
-		}
-		switch strings.ToLower(fe.Name) {
-		case "now":
-			found = true
-		case "rand", "rand_normal", "rand_exponential":
-			found = len(fe.Args) == 0
-		}
-	})
-	return found
+	return tssFirst, tssSecond, nil
 }
 
 func getCommonLabelFilters(tss []*timeseries) []metricsql.LabelFilter {

app/vmselect/promql/eval_test.go

@@ -170,87 +170,3 @@ func TestGetSumInstantValues(t *testing.T) {
 		[]*timeseries{ts("foo", 100, 1)},
 	)
 }
-
-func TestShouldOptimizeRepeatedBinaryOpSubexprsGate(t *testing.T) {
-	e, err := metricsql.Parse(`count(count(vm_requests_total) by (action,addr,cluster,endpoint)) by (action,addr,cluster) / count(count(vm_requests_total) by (action,addr,cluster,endpoint))`)
-	if err != nil {
-		t.Fatalf("unexpected error in metricsql.Parse(): %s", err)
-	}
-	be, ok := e.(*metricsql.BinaryOpExpr)
-	if !ok {
-		t.Fatalf("unexpected expr type; got %T; want *metricsql.BinaryOpExpr", e)
-	}
-
-	f := func(name string, ec *EvalConfig, resultExpected bool) {
-		t.Helper()
-		result := shouldOptimizeRepeatedBinaryOpSubexprs(ec, be.Left, be.Right)
-		if result != resultExpected {
-			t.Fatalf("unexpected result for %q; got %v; want %v", name, result, resultExpected)
-		}
-	}
-
-	f("disabled optimization", &EvalConfig{
-		Start: 1000,
-		End:   2000,
-		Step:  1000,
-	}, false)
-	f("disabled cache", &EvalConfig{
-		Start:                            1000,
-		End:                              2000,
-		Step:                             1000,
-		OptimizeRepeatedBinaryOpSubexprs: true,
-	}, false)
-	f("instant query", &EvalConfig{
-		Start:                            1000,
-		End:                              1000,
-		Step:                             1000,
-		MayCache:                         true,
-		OptimizeRepeatedBinaryOpSubexprs: true,
-	}, false)
-	f("repeated cacheable aggregate subexpression", &EvalConfig{
-		Start:                            1000,
-		End:                              2000,
-		Step:                             1000,
-		MayCache:                         true,
-		OptimizeRepeatedBinaryOpSubexprs: true,
-	}, true)
-	f("unaligned range query", &EvalConfig{
-		Start:                            1001,
-		End:                              2000,
-		Step:                             1000,
-		MayCache:                         true,
-		OptimizeRepeatedBinaryOpSubexprs: true,
-	}, false)
-}
-
-func TestShouldOptimizeRepeatedBinaryOpSubexprsExpressions(t *testing.T) {
-	f := func(name, q string, resultExpected bool) {
-		t.Helper()
-		e, err := metricsql.Parse(q)
-		if err != nil {
-			t.Fatalf("unexpected error in metricsql.Parse(%q) for %q: %s", q, name, err)
-		}
-		be, ok := e.(*metricsql.BinaryOpExpr)
-		if !ok {
-			t.Fatalf("unexpected expr type for %q; got %T; want *metricsql.BinaryOpExpr", name, e)
-		}
-		ec := &EvalConfig{Start: 1000, End: 2000, Step: 1000, MayCache: true, OptimizeRepeatedBinaryOpSubexprs: true}
-		result := shouldOptimizeRepeatedBinaryOpSubexprs(ec, be.Left, be.Right)
-		if result != resultExpected {
-			t.Fatalf("unexpected result for %q; got %v; want %v; query: %q", name, result, resultExpected, q)
-		}
-	}
-
-	f("original issue query", `count(count(vm_requests_total) by (action,addr,cluster,endpoint)) by (action,addr,cluster) / count(count(vm_requests_total) by (action,addr,cluster,endpoint))`, true)
-	f("right side contains repeated count aggregate", `count(foo) by (job) / (count(foo) by (job) + 1)`, true)
-	f("same sum aggregate", `sum(rate(foo[5m])) by (job) / sum(rate(foo[5m])) by (job)`, true)
-	f("same inner rollup but different aggregates", `sum(rate(foo[5m])) by (job) / count(rate(foo[5m])) by (job)`, false)
-	f("different count aggregates", `count(foo) by (job) / count(bar) by (job)`, false)
-	f("bare metric selector", `foo / foo`, false)
-	f("bare rollup function", `rate(a[5m]) / rate(a[5m])`, false)
-	f("now at modifier", `sum(rate(foo[5m] @ now())) by (job) / sum(rate(foo[5m] @ now())) by (job)`, false)
-	f("unseeded rand at modifier", `sum(rate(foo[5m] @ rand())) by (job) / sum(rate(foo[5m] @ rand())) by (job)`, false)
-	f("unseeded rand_normal at modifier", `sum(rate(foo[5m] @ rand_normal())) by (job) / sum(rate(foo[5m] @ rand_normal())) by (job)`, false)
-	f("unseeded rand_exponential at modifier", `sum(rate(foo[5m] @ rand_exponential())) by (job) / sum(rate(foo[5m] @ rand_exponential())) by (job)`, false)
-	f("seeded rand at modifier", `sum(rate(foo[5m] @ rand(1))) by (job) / sum(rate(foo[5m] @ rand(1))) by (job)`, true)
-}

app/vmselect/promql/exec_test.go

@@ -2994,136 +2994,6 @@ func TestExecSuccess(t *testing.T) {
 		resultExpected := []netstorage.Result{}
 		f(q, resultExpected)
 	})
-	t.Run(`compare_to_nan_left_vector_right_scalar`, func(t *testing.T) {
-		t.Parallel()
-		q := `label_set(time(), "foo", "bar") != NaN`
-		r := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{1000, 1200, 1400, 1600, 1800, 2000},
-			Timestamps: timestampsExpected,
-		}
-		r.MetricName.Tags = []storage.Tag{{
-			Key:   []byte("foo"),
-			Value: []byte("bar"),
-		}}
-		resultExpected := []netstorage.Result{r}
-		f(q, resultExpected)
-	})
-	t.Run(`compare_to_non_nan_scalar_right`, func(t *testing.T) {
-		t.Parallel()
-		q := `label_set(time(), "foo", "bar") != 1200`
-		r := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{1000, nan, 1400, 1600, 1800, 2000},
-			Timestamps: timestampsExpected,
-		}
-		r.MetricName.Tags = []storage.Tag{{
-			Key:   []byte("foo"),
-			Value: []byte("bar"),
-		}}
-		resultExpected := []netstorage.Result{r}
-		f(q, resultExpected)
-	})
-	t.Run(`compare_to_nan_vector_right`, func(t *testing.T) {
-		t.Parallel()
-		q := `label_set(time(), "foo", "bar") != label_set(NaN, "foo", "bar")`
-		r := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{1000, 1200, 1400, 1600, 1800, 2000},
-			Timestamps: timestampsExpected,
-		}
-		r.MetricName.Tags = []storage.Tag{{
-			Key:   []byte("foo"),
-			Value: []byte("bar"),
-		}}
-		resultExpected := []netstorage.Result{r}
-		f(q, resultExpected)
-	})
-	t.Run(`compare_to_nan_scalar_comparison_right`, func(t *testing.T) {
-		t.Parallel()
-		q := `label_set(time(), "foo", "bar") != (1 > 2)`
-		r := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{1000, 1200, 1400, 1600, 1800, 2000},
-			Timestamps: timestampsExpected,
-		}
-		r.MetricName.Tags = []storage.Tag{{
-			Key:   []byte("foo"),
-			Value: []byte("bar"),
-		}}
-		resultExpected := []netstorage.Result{r}
-		f(q, resultExpected)
-	})
-	t.Run(`compare_to_empty_vector_right`, func(t *testing.T) {
-		t.Parallel()
-		q := `label_set(time(), "foo", "bar") != (label_set(time(), "foo", "bar") > 100000)`
-		resultExpected := []netstorage.Result{}
-		f(q, resultExpected)
-	})
-	t.Run(`compare_to_empty_vector_right_offset`, func(t *testing.T) {
-		t.Parallel()
-		q := `label_set(time(), "foo", "bar") != ((label_set(time(), "foo", "bar") > 100000) offset 0s)`
-		resultExpected := []netstorage.Result{}
-		f(q, resultExpected)
-	})
-	t.Run(`compare_to_empty_vector_left`, func(t *testing.T) {
-		// A missing sample on the left side results in NaN for every comparison
-		// operation, so no special handling is needed there.
-		t.Parallel()
-		q := `(label_set(time(), "foo", "bar") > 100000) != label_set(time(), "foo", "bar")`
-		resultExpected := []netstorage.Result{}
-		f(q, resultExpected)
-	})
-	t.Run(`compare_to_empty_series_right_bool`, func(t *testing.T) {
-		t.Parallel()
-		q := `label_set(time(), "foo", "bar") == bool (label_set(time(), "foo", "bar") > 100000)`
-		resultExpected := []netstorage.Result{}
-		f(q, resultExpected)
-	})
-	t.Run(`compare_to_partially_empty_series_right`, func(t *testing.T) {
-		// Prometheus drops the timestamps filtered out by the comparison on the right.
-		// See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/11100#issuecomment-4933952390.
-		t.Parallel()
-		q := `label_set(time(), "foo", "bar") != (label_set(time(), "foo", "bar") * 2 > 2800)`
-		r := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{nan, nan, nan, 1600, 1800, 2000},
-			Timestamps: timestampsExpected,
-		}
-		r.MetricName.Tags = []storage.Tag{{
-			Key:   []byte("foo"),
-			Value: []byte("bar"),
-		}}
-		resultExpected := []netstorage.Result{r}
-		f(q, resultExpected)
-	})
-	t.Run(`compare_to_empty_unlabeled_vector_right`, func(t *testing.T) {
-		t.Parallel()
-		q := `sum(label_set(time(), "foo", "bar")) != (sum(label_set(time(), "foo", "bar")) > 100000)`
-		resultExpected := []netstorage.Result{}
-		f(q, resultExpected)
-	})
-	t.Run(`compare_to_empty_series_right_with_fill_left`, func(t *testing.T) {
-		t.Parallel()
-		q := `label_set(time(), "foo", "bar") != fill_left(0) (label_set(time(), "foo", "bar") > 100000)`
-		resultExpected := []netstorage.Result{}
-		f(q, resultExpected)
-	})
-	t.Run(`compare_to_empty_series_right_with_fill_right`, func(t *testing.T) {
-		t.Parallel()
-		q := `label_set(time(), "foo", "bar") != fill_right(0) (label_set(time(), "foo", "bar") > 100000)`
-		r := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{1000, 1200, 1400, 1600, 1800, 2000},
-			Timestamps: timestampsExpected,
-		}
-		r.MetricName.Tags = []storage.Tag{{
-			Key:   []byte("foo"),
-			Value: []byte("bar"),
-		}}
-		resultExpected := []netstorage.Result{r}
-		f(q, resultExpected)
-	})
 	t.Run(`-1 < 2`, func(t *testing.T) {
 		t.Parallel()
 		q := `-1 < 2`
@@ -4136,275 +4006,6 @@ func TestExecSuccess(t *testing.T) {
 		resultExpected := []netstorage.Result{r1, r2}
 		f(q, resultExpected)
 	})
-	t.Run(`vector + vector fill()`, func(t *testing.T) {
-		t.Parallel()
-		q := `sort_by_label((
-			label_set(1, "foo", "common")
-			or label_set(2, "foo", "left_only")
-		) + fill(0) (
-			label_set(3, "foo", "common")
-			or label_set(4, "foo", "right_only")
-		), "foo")`
-		r1 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{4, 4, 4, 4, 4, 4},
-			Timestamps: timestampsExpected,
-		}
-		r1.MetricName.Tags = []storage.Tag{{
-			Key:   []byte("foo"),
-			Value: []byte("common"),
-		}}
-		r2 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{2, 2, 2, 2, 2, 2},
-			Timestamps: timestampsExpected,
-		}
-		r2.MetricName.Tags = []storage.Tag{{
-			Key:   []byte("foo"),
-			Value: []byte("left_only"),
-		}}
-		r3 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{4, 4, 4, 4, 4, 4},
-			Timestamps: timestampsExpected,
-		}
-		r3.MetricName.Tags = []storage.Tag{{
-			Key:   []byte("foo"),
-			Value: []byte("right_only"),
-		}}
-		resultExpected := []netstorage.Result{r1, r2, r3}
-		f(q, resultExpected)
-	})
-	t.Run(`vector + vector fill() both sides NaN case`, func(t *testing.T) {
-		t.Parallel()
-		q := `(
-			label_set(time() <= 1200, "foo", "common")
-		) + fill(10) (
-			label_set(time() >= 1600, "foo", "common")
-		)`
-		r := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{1010, 1210, nan, 1610, 1810, 2010},
-			Timestamps: timestampsExpected,
-		}
-		r.MetricName.Tags = []storage.Tag{{
-			Key:   []byte("foo"),
-			Value: []byte("common"),
-		}}
-		resultExpected := []netstorage.Result{r}
-		f(q, resultExpected)
-	})
-	t.Run(`vector + vector fill_left() fill_right()`, func(t *testing.T) {
-		t.Parallel()
-		q := `sort_by_label((
-			label_set(1, "foo", "common")
-			or label_set(2, "foo", "left_only")
-		) + fill_left(10) fill_right(20) (
-			label_set(3, "foo", "common")
-			or label_set(4, "foo", "right_only")
-		), "foo")`
-		r1 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{4, 4, 4, 4, 4, 4},
-			Timestamps: timestampsExpected,
-		}
-		r1.MetricName.Tags = []storage.Tag{{
-			Key:   []byte("foo"),
-			Value: []byte("common"),
-		}}
-		r2 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{22, 22, 22, 22, 22, 22},
-			Timestamps: timestampsExpected,
-		}
-		r2.MetricName.Tags = []storage.Tag{{
-			Key:   []byte("foo"),
-			Value: []byte("left_only"),
-		}}
-		r3 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{14, 14, 14, 14, 14, 14},
-			Timestamps: timestampsExpected,
-		}
-		r3.MetricName.Tags = []storage.Tag{{
-			Key:   []byte("foo"),
-			Value: []byte("right_only"),
-		}}
-		resultExpected := []netstorage.Result{r1, r2, r3}
-		f(q, resultExpected)
-	})
-	t.Run(`vector + vector fill_right() only`, func(t *testing.T) {
-		t.Parallel()
-		q := `sort_by_label((
-			label_set(1, "foo", "common")
-			or label_set(2, "foo", "left_only")
-		) + fill_right(20) (
-			label_set(3, "foo", "common")
-			or label_set(4, "foo", "right_only")
-		), "foo")`
-		r1 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{4, 4, 4, 4, 4, 4},
-			Timestamps: timestampsExpected,
-		}
-		r1.MetricName.Tags = []storage.Tag{{
-			Key:   []byte("foo"),
-			Value: []byte("common"),
-		}}
-		r2 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{22, 22, 22, 22, 22, 22},
-			Timestamps: timestampsExpected,
-		}
-		r2.MetricName.Tags = []storage.Tag{{
-			Key:   []byte("foo"),
-			Value: []byte("left_only"),
-		}}
-		resultExpected := []netstorage.Result{r1, r2}
-		f(q, resultExpected)
-	})
-	t.Run(`vector + vector on() fill()`, func(t *testing.T) {
-		t.Parallel()
-		q := `sort_by_label((
-			label_set(1, "foo", "common", "extra", "l")
-			or label_set(2, "foo", "left_only", "extra", "l")
-		) + on(foo) fill(0) (
-			label_set(3, "foo", "common", "extra", "r")
-			or label_set(4, "foo", "right_only", "extra", "r")
-		), "foo")`
-		r1 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{4, 4, 4, 4, 4, 4},
-			Timestamps: timestampsExpected,
-		}
-		r1.MetricName.Tags = []storage.Tag{{
-			Key:   []byte("foo"),
-			Value: []byte("common"),
-		}}
-		r2 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{2, 2, 2, 2, 2, 2},
-			Timestamps: timestampsExpected,
-		}
-		r2.MetricName.Tags = []storage.Tag{{
-			Key:   []byte("foo"),
-			Value: []byte("left_only"),
-		}}
-		r3 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{4, 4, 4, 4, 4, 4},
-			Timestamps: timestampsExpected,
-		}
-		r3.MetricName.Tags = []storage.Tag{{
-			Key:   []byte("foo"),
-			Value: []byte("right_only"),
-		}}
-		resultExpected := []netstorage.Result{r1, r2, r3}
-		f(q, resultExpected)
-	})
-	t.Run(`vector + vector on() group_left() fill_right()`, func(t *testing.T) {
-		t.Parallel()
-		q := `sort_by_label((
-			label_set(1, "method", "get", "code", "500")
-			or label_set(2, "method", "get", "code", "404")
-			or label_set(3, "method", "put", "code", "501")
-		) + on(method) group_left() fill_right(0) (
-			label_set(10, "method", "get")
-		), "method", "code")`
-		r1 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{12, 12, 12, 12, 12, 12},
-			Timestamps: timestampsExpected,
-		}
-		r1.MetricName.Tags = []storage.Tag{
-			{
-				Key:   []byte("code"),
-				Value: []byte("404"),
-			},
-			{
-				Key:   []byte("method"),
-				Value: []byte("get"),
-			},
-		}
-		r2 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{11, 11, 11, 11, 11, 11},
-			Timestamps: timestampsExpected,
-		}
-		r2.MetricName.Tags = []storage.Tag{
-			{
-				Key:   []byte("code"),
-				Value: []byte("500"),
-			},
-			{
-				Key:   []byte("method"),
-				Value: []byte("get"),
-			},
-		}
-		r3 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{3, 3, 3, 3, 3, 3},
-			Timestamps: timestampsExpected,
-		}
-		r3.MetricName.Tags = []storage.Tag{
-			{
-				Key:   []byte("code"),
-				Value: []byte("501"),
-			},
-			{
-				Key:   []byte("method"),
-				Value: []byte("put"),
-			},
-		}
-		resultExpected := []netstorage.Result{r1, r2, r3}
-		f(q, resultExpected)
-	})
-	t.Run(`vector / vector ignoring() fill()`, func(t *testing.T) {
-		t.Parallel()
-		q := `sort_by_label((
-			label_set(6, "method", "get", "code", "500")
-			or label_set(1, "method", "put", "code", "500")
-		) / ignoring(code) fill(0) (
-			label_set(12, "method", "get")
-			or label_set(5, "method", "post")
-			or label_set(10, "method", "put")
-		), "method")`
-		r1 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{0.5, 0.5, 0.5, 0.5, 0.5, 0.5},
-			Timestamps: timestampsExpected,
-		}
-		r1.MetricName.Tags = []storage.Tag{
-			{
-				Key:   []byte("method"),
-				Value: []byte("get"),
-			},
-		}
-		r2 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{0, 0, 0, 0, 0, 0},
-			Timestamps: timestampsExpected,
-		}
-		r2.MetricName.Tags = []storage.Tag{
-			{
-				Key:   []byte("method"),
-				Value: []byte("post"),
-			},
-		}
-		r3 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{0.1, 0.1, 0.1, 0.1, 0.1, 0.1},
-			Timestamps: timestampsExpected,
-		}
-		r3.MetricName.Tags = []storage.Tag{
-			{
-				Key:   []byte("method"),
-				Value: []byte("put"),
-			},
-		}
-		resultExpected := []netstorage.Result{r1, r2, r3}
-		f(q, resultExpected)
-	})
 	t.Run(`histogram_quantile(scalar)`, func(t *testing.T) {
 		t.Parallel()
 		q := `histogram_quantile(0.6, time())`
@@ -5232,137 +4833,13 @@ func TestExecSuccess(t *testing.T) {
 		resultExpected := []netstorage.Result{}
 		f(q, resultExpected)
 	})
-	// buckets that are consecutively empty at left and right ends will not be preserved.
-	t.Run(`buckets_limit(trim_zero_preserve_empty_when_limit_not_reached)`, func(t *testing.T) {
+	t.Run(`buckets_limit(zero)`, func(t *testing.T) {
 		t.Parallel()
-		q := `sort(buckets_limit(3, (
-			alias(label_set(36, "le", "+Inf"), "metric"),
-			alias(label_set(36, "le", "25"), "metric"),
-			alias(label_set(36, "le", "21"), "metric"),
-			alias(label_set(36, "le", "19"), "metric"),
-			alias(label_set(36, "le", "18"), "metric"),
-			alias(label_set(36, "le", "17"), "metric"),
-			alias(label_set(36, "le", "16"), "metric"),
-			alias(label_set(27, "le", "12"), "metric"),
-			alias(label_set(14, "le", "9"), "metric"),
-			alias(label_set(0, "le", "6"), "metric"),
-			alias(label_set(0, "le", "1"), "metric"),
-			)))`
-		r1 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{14, 14, 14, 14, 14, 14},
-			Timestamps: timestampsExpected,
-		}
-		r1.MetricName.MetricGroup = []byte("metric")
-		r1.MetricName.Tags = []storage.Tag{
-			{
-				Key:   []byte("le"),
-				Value: []byte("9"),
-			},
-		}
-		r2 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{27, 27, 27, 27, 27, 27},
-			Timestamps: timestampsExpected,
-		}
-		r2.MetricName.MetricGroup = []byte("metric")
-		r2.MetricName.Tags = []storage.Tag{
-			{
-				Key:   []byte("le"),
-				Value: []byte("12"),
-			},
-		}
-		r3 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{36, 36, 36, 36, 36, 36},
-			Timestamps: timestampsExpected,
-		}
-		r3.MetricName.MetricGroup = []byte("metric")
-		r3.MetricName.Tags = []storage.Tag{
-			{
-				Key:   []byte("le"),
-				Value: []byte("16"),
-			},
-		}
-		resultExpected := []netstorage.Result{r1, r2, r3}
-		f(q, resultExpected)
-	})
-
-	// the number of non-empty bucket doesn't reach the given "limit", so some empty buckets will be preserved, and left buckets are preferred to be kept.
-	t.Run(`buckets_limit(trim_zero)`, func(t *testing.T) {
-		t.Parallel()
-		q := `sort(buckets_limit(5, (
-			alias(label_set(36, "le", "18"), "metric"),
-			alias(label_set(36, "le", "17"), "metric"),
-			alias(label_set(36, "le", "16"), "metric"),
-			alias(label_set(27, "le", "12"), "metric"),
-			alias(label_set(14, "le", "9"), "metric"),
-			alias(label_set(0, "le", "6"), "metric"),
-			alias(label_set(0, "le", "1"), "metric"),
-			)))`
-
-		r1 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{0, 0, 0, 0, 0, 0},
-			Timestamps: timestampsExpected,
-		}
-		r1.MetricName.MetricGroup = []byte("metric")
-		r1.MetricName.Tags = []storage.Tag{
-			{
-				Key:   []byte("le"),
-				Value: []byte("1"),
-			},
-		}
-		r2 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{0, 0, 0, 0, 0, 0},
-			Timestamps: timestampsExpected,
-		}
-		r2.MetricName.MetricGroup = []byte("metric")
-		r2.MetricName.Tags = []storage.Tag{
-			{
-				Key:   []byte("le"),
-				Value: []byte("6"),
-			},
-		}
-		r3 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{14, 14, 14, 14, 14, 14},
-			Timestamps: timestampsExpected,
-		}
-		r3.MetricName.MetricGroup = []byte("metric")
-		r3.MetricName.Tags = []storage.Tag{
-			{
-				Key:   []byte("le"),
-				Value: []byte("9"),
-			},
-		}
-		r4 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{27, 27, 27, 27, 27, 27},
-			Timestamps: timestampsExpected,
-		}
-		r4.MetricName.MetricGroup = []byte("metric")
-		r4.MetricName.Tags = []storage.Tag{
-			{
-				Key:   []byte("le"),
-				Value: []byte("12"),
-			},
-		}
-		r5 := netstorage.Result{
-			MetricName: metricNameExpected,
-			Values:     []float64{36, 36, 36, 36, 36, 36},
-			Timestamps: timestampsExpected,
-		}
-		r5.MetricName.MetricGroup = []byte("metric")
-		r5.MetricName.Tags = []storage.Tag{
-			{
-				Key:   []byte("le"),
-				Value: []byte("16"),
-			},
-		}
-
-		resultExpected := []netstorage.Result{r1, r2, r3, r4, r5}
+		q := `buckets_limit(0, (
+			alias(label_set(100, "le", "inf", "x", "y"), "metric"),
+			alias(label_set(50, "le", "120", "x", "y"), "metric"),
+		))`
+		resultExpected := []netstorage.Result{}
 		f(q, resultExpected)
 	})
 	t.Run(`buckets_limit(unused)`, func(t *testing.T) {
@@ -6751,6 +6228,50 @@ func TestExecSuccess(t *testing.T) {
 		resultExpected := []netstorage.Result{r1, r2, r3, r4, r5, r6, r7}
 		f(q, resultExpected)
 	})
+	t.Run(`sum(histogram_over_time) by (vmrange)`, func(t *testing.T) {
+		t.Parallel()
+		q := `sort_by_label(
+			buckets_limit(
+				3,
+				sum(histogram_over_time(alias(label_set(rand(0)*1.3+1.1, "foo", "bar"), "xxx")[200s:5s])) by (vmrange)
+			), "le"
+		)`
+		r1 := netstorage.Result{
+			MetricName: metricNameExpected,
+			Values:     []float64{40, 40, 40, 40, 40, 40},
+			Timestamps: timestampsExpected,
+		}
+		r1.MetricName.Tags = []storage.Tag{
+			{
+				Key:   []byte("le"),
+				Value: []byte("+Inf"),
+			},
+		}
+		r2 := netstorage.Result{
+			MetricName: metricNameExpected,
+			Values:     []float64{0, 0, 0, 0, 0, 0},
+			Timestamps: timestampsExpected,
+		}
+		r2.MetricName.Tags = []storage.Tag{
+			{
+				Key:   []byte("le"),
+				Value: []byte("1.000e+00"),
+			},
+		}
+		r3 := netstorage.Result{
+			MetricName: metricNameExpected,
+			Values:     []float64{40, 40, 40, 40, 40, 40},
+			Timestamps: timestampsExpected,
+		}
+		r3.MetricName.Tags = []storage.Tag{
+			{
+				Key:   []byte("le"),
+				Value: []byte("2.448e+00"),
+			},
+		}
+		resultExpected := []netstorage.Result{r1, r2, r3}
+		f(q, resultExpected)
+	})
 	t.Run(`sum(histogram_over_time)`, func(t *testing.T) {
 		t.Parallel()
 		q := `sum(histogram_over_time(alias(label_set(rand(0)*1.3+1.1, "foo", "bar"), "xxx")[200s:5s]))`

app/vmselect/promql/rollup.go

@@ -1055,7 +1055,7 @@ func newRollupHoltWinters(args []any) (rollupFunc, error) {
 			return nan
 		}
 
-		// See https://en.wikipedia.org/wiki/Exponential_smoothing#Double_exponential_smoothing_%28Holt_linear%29 .
+		// See https://en.wikipedia.org/wiki/Exponential_smoothing#Double_exponential_smoothing .
 		// TODO: determine whether this shit really works.
 		s0 := rfa.prevValue
 		if math.IsNaN(s0) {

app/vmselect/promql/timeseries.go

@@ -2,7 +2,6 @@ package promql
 
 import (
 	"fmt"
-	"math"
 	"sort"
 	"strconv"
 	"sync"
@@ -289,9 +288,6 @@ func marshalMetricTagsSorted(dst []byte, mn *storage.MetricName) []byte {
 }
 
 func marshalBytesFast(dst []byte, s []byte) []byte {
-	if len(s) > math.MaxUint16 {
-		logger.Panicf("BUG: s len %d cannot exceed %d", len(s), math.MaxUint16)
-	}
 	dst = encoding.MarshalUint16(dst, uint16(len(s)))
 	dst = append(dst, s...)
 	return dst

app/vmselect/promql/transform.go

@@ -393,7 +393,7 @@ func transformBucketsLimit(tfa *transformFuncArg) ([]*timeseries, error) {
 		return nil, err
 	}
 	if limit <= 0 {
-		return nil, fmt.Errorf("limit must be greater than 0; got %d", limit)
+		return nil, nil
 	}
 	if limit < 3 {
 		// Preserve the first and the last bucket for better accuracy for min and max values.
@@ -461,23 +461,6 @@ func transformBucketsLimit(tfa *transformFuncArg) ([]*timeseries, error) {
 				prevValue = value
 			}
 		}
-
-		// Remove buckets that are consecutively empty at left and right ends to obtain more accurate max and min values.
-		// See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/10417.
-		epsilon := 1e-9
-		isEmptyBucket := func(hits float64) bool {
-			return !math.IsNaN(hits) && math.Abs(hits) < epsilon
-		}
-		l := 0
-		r := len(leGroup) - 1
-		for r-l+1 > limit && isEmptyBucket(leGroup[r].hits) {
-			r--
-		}
-		for r-l+1 > limit && isEmptyBucket(leGroup[l].hits) {
-			l++
-		}
-		leGroup = leGroup[l : r+1]
-
 		for len(leGroup) > limit {
 			// Preserve the first and the last bucket for better accuracy for min and max values
 			xxMinIdx := 1
@@ -1138,29 +1121,29 @@ func groupLeTimeseries(tss []*timeseries) map[string][]leTimeseries {
 
 func fixBrokenBuckets(i int, xss []leTimeseries) {
 	// Buckets are already sorted by le, so their values must be in ascending order,
-	// since the upper bucket includes all the lower buckets.
-	// If the upper bucket has lower value than the current bucket,
-	// then the upper bucket must be substituted with the current bucket value.
+	// since the next bucket includes all the previous buckets.
+	// If the next bucket has lower value than the current bucket,
+	// then the next bucket must be substituted with the current bucket value.
 	// See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4580#issuecomment-2186659102
 	if len(xss) < 2 {
 		return
 	}
 
-	vPrev := xss[0].ts.Values[i]
+	vNext := xss[0].ts.Values[i]
 	// Set the lowest bucket to 0 if its value is NaN, so it can be properly
 	// compared with upper buckets in the loop below.
-	if math.IsNaN(vPrev) {
-		vPrev = 0
-		xss[0].ts.Values[i] = vPrev
+	if math.IsNaN(vNext) {
+		vNext = 0
+		xss[0].ts.Values[i] = vNext
 	}
 	// Substitute upper bucket values with lower bucket values if the upper values are NaN
-	// or are smaller than the lower bucket values.
+	// or are bigger than the lower bucket values.
 	for j := 1; j < len(xss); j++ {
 		v := xss[j].ts.Values[i]
-		if math.IsNaN(v) || vPrev > v {
-			xss[j].ts.Values[i] = vPrev
+		if math.IsNaN(v) || vNext > v {
+			xss[j].ts.Values[i] = vNext
 		} else {
-			vPrev = v
+			vNext = v
 		}
 	}
 }

app/vmselect/vmui/assets/MetricsQL-DmQtQmkX.md

@@ -91,9 +91,9 @@ The list of MetricsQL features on top of PromQL:
   Labels from the `on()` list aren't copied.
 * [Aggregate functions](#aggregate-functions) accept arbitrary number of args.
   For example, `avg(q1, q2, q3)` would return the average values for every point across time series returned by `q1`, `q2` and `q3`.
-* [@ modifier](https://prometheus.io/docs/prometheus/latest/querying/basics/#-modifier) can be put anywhere in the query.
+* [@ modifier](https://prometheus.io/docs/prometheus/latest/querying/basics/#modifier) can be put anywhere in the query.
   For example, `sum(foo) @ end()` calculates `sum(foo)` at the `end` timestamp of the selected time range `[start ... end]`.
-* Arbitrary subexpression can be used as [@ modifier](https://prometheus.io/docs/prometheus/latest/querying/basics/#-modifier).
+* Arbitrary subexpression can be used as [@ modifier](https://prometheus.io/docs/prometheus/latest/querying/basics/#modifier).
   For example, `foo @ (end() - 1h)` calculates `foo` at the `end - 1 hour` timestamp on the selected time range `[start ... end]`.
 * [offset](https://prometheus.io/docs/prometheus/latest/querying/basics/#offset-modifier), lookbehind window in square brackets
   and `step` value for [subquery](#subqueries) may refer to the current step aka `$__interval` value from Grafana with `[Ni]` syntax.
@@ -482,7 +482,7 @@ See also [hoeffding_bound_lower](#hoeffding_bound_lower).
 #### holt_winters
 
 `holt_winters(series_selector[d], sf, tf)` is a [rollup function](#rollup-functions), which calculates Holt-Winters value
-(aka [double exponential smoothing](https://en.wikipedia.org/wiki/Exponential_smoothing#Double_exponential_smoothing_%28Holt_linear%29)) for [raw samples](https://docs.victoriametrics.com/victoriametrics/keyconcepts/#raw-samples)
+(aka [double exponential smoothing](https://en.wikipedia.org/wiki/Exponential_smoothing#Double_exponential_smoothing)) for [raw samples](https://docs.victoriametrics.com/victoriametrics/keyconcepts/#raw-samples)
 over the given lookbehind window `d` using the given smoothing factor `sf` and the given trend factor `tf`.
 Both `sf` and `tf` must be in the range `[0...1]`.
 
@@ -1154,7 +1154,7 @@ See also [asin](#asin) and [cos](#cos).
 #### acosh
 
 `acosh(q)` is a [transform function](#transform-functions), which returns
-[inverse hyperbolic cosine](https://en.wikipedia.org/wiki/Inverse_hyperbolic_functions#Definitions_in_terms_of_logarithms) for every point of every time series returned by `q`.
+[inverse hyperbolic cosine](https://en.wikipedia.org/wiki/Inverse_hyperbolic_functions#Inverse_hyperbolic_cosine) for every point of every time series returned by `q`.
 
 Metric names are stripped from the resulting series. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
 
@@ -1176,7 +1176,7 @@ See also [acos](#acos) and [sin](#sin).
 #### asinh
 
 `asinh(q)` is a [transform function](#transform-functions), which returns
-[inverse hyperbolic sine](https://en.wikipedia.org/wiki/Inverse_hyperbolic_functions#Definitions_in_terms_of_logarithms) for every point of every time series returned by `q`.
+[inverse hyperbolic sine](https://en.wikipedia.org/wiki/Inverse_hyperbolic_functions#Inverse_hyperbolic_sine) for every point of every time series returned by `q`.
 
 Metric names are stripped from the resulting series. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
 
@@ -1198,7 +1198,7 @@ See also [tan](#tan).
 #### atanh
 
 `atanh(q)` is a [transform function](#transform-functions), which returns
-[inverse hyperbolic tangent](https://en.wikipedia.org/wiki/Inverse_hyperbolic_functions#Definitions_in_terms_of_logarithms) for every point of every time series returned by `q`.
+[inverse hyperbolic tangent](https://en.wikipedia.org/wiki/Inverse_hyperbolic_functions#Inverse_hyperbolic_tangent) for every point of every time series returned by `q`.
 
 Metric names are stripped from the resulting series. Add [keep_metric_names](#keep_metric_names) modifier in order to keep metric names.
 
@@ -1229,7 +1229,8 @@ Metric names are stripped from the resulting series. Add [keep_metric_names](#ke
 `buckets_limit(limit, buckets)` is a [transform function](#transform-functions), which limits the number
 of [histogram buckets](https://valyala.medium.com/improving-histogram-usability-for-prometheus-and-grafana-bc7e5df0e350) to the given `limit`. 
 
-The given `limit` should be greater than `0`. If it is less than `3`, it will be automatically raised to `3` to preserve the first and last buckets for better accuracy of min and max values.
+The result will preserve the first and the last bucket to improve accuracy for min and max values. 
+So, if the `limit` is greater than 0 and less than 3, the function will still return 3 buckets: the first bucket, the last bucket, and a selected bucket.
 
 See also [prometheus_buckets](#prometheus_buckets) and [histogram_quantile](#histogram_quantile).
 

app/vmselect/vmui/assets/rolldown-runtime-CNC7AqOf.js

@@ -1 +0,0 @@
-var e=Object.create,t=Object.defineProperty,n=Object.getOwnPropertyDescriptor,r=Object.getOwnPropertyNames,i=Object.getPrototypeOf,a=Object.prototype.hasOwnProperty,o=(e,t,n)=>()=>{if(n)throw n[0];try{return e&&(t=e(e=0)),t}catch(e){throw n=[e],e}},s=(e,t)=>()=>(t||(e((t={exports:{}}).exports,t),e=null),t.exports),c=(e,n)=>{let r={};for(var i in e)t(r,i,{get:e[i],enumerable:!0});return n||t(r,Symbol.toStringTag,{value:`Module`}),r},l=(e,i,o,s)=>{if(i&&typeof i==`object`||typeof i==`function`)for(var c=r(i),l=0,u=c.length,d;l<u;l++)d=c[l],!a.call(e,d)&&d!==o&&t(e,d,{get:(e=>i[e]).bind(null,d),enumerable:!(s=n(i,d))||s.enumerable});return e},u=(n,r,a)=>(a=n==null?{}:e(i(n)),l(r||!n||!n.__esModule?t(a,`default`,{value:n,enumerable:!0}):a,n)),d=e=>a.call(e,`module.exports`)?e[`module.exports`]:l(t({},`__esModule`,{value:!0}),e);export{u as a,d as i,o as n,c as r,s as t};

app/vmselect/vmui/assets/rolldown-runtime-COnpUsM8.js

@@ -0,0 +1 @@
+var e=Object.create,t=Object.defineProperty,n=Object.getOwnPropertyDescriptor,r=Object.getOwnPropertyNames,i=Object.getPrototypeOf,a=Object.prototype.hasOwnProperty,o=(e,t)=>()=>(e&&(t=e(e=0)),t),s=(e,t)=>()=>(t||e((t={exports:{}}).exports,t),t.exports),c=(e,n)=>{let r={};for(var i in e)t(r,i,{get:e[i],enumerable:!0});return n||t(r,Symbol.toStringTag,{value:`Module`}),r},l=(e,i,o,s)=>{if(i&&typeof i==`object`||typeof i==`function`)for(var c=r(i),l=0,u=c.length,d;l<u;l++)d=c[l],!a.call(e,d)&&d!==o&&t(e,d,{get:(e=>i[e]).bind(null,d),enumerable:!(s=n(i,d))||s.enumerable});return e},u=(n,r,a)=>(a=n==null?{}:e(i(n)),l(r||!n||!n.__esModule?t(a,`default`,{value:n,enumerable:!0}):a,n)),d=e=>a.call(e,`module.exports`)?e[`module.exports`]:l(t({},`__esModule`,{value:!0}),e);export{u as a,d as i,o as n,c as r,s as t};