Revert "Forced pattern , separed to > 9 extruder"

This reverts commit 42b506ad85.

.github/workflows/publish_release.yml

@@ -1,127 +0,0 @@
-name: Publish to draft release
-
-# Manually pulls the platform binaries produced by a "Build all" run and uploads
-# them to an existing DRAFT release. Decoupled from the build so you can test a
-# build first, then publish exactly that run's artifacts once you're happy.
-#
-# Trigger: Actions tab -> "Publish to draft release" -> Run workflow.
-# Locked to a single person: the first step aborts unless the actor matches the
-# `RELEASE_PUBLISHER` repo variable (set to "SoftFever"). To allow someone else,
-# change that variable: gh variable set RELEASE_PUBLISHER --body "<login>".
-
-on:
-  workflow_dispatch:
-    inputs:
-      run_id:
-        description: 'Run ID of the "Build all" workflow to pull binaries from (the number in the Actions run URL)'
-        required: true
-        type: string
-      tag:
-        description: 'Tag of the draft release to upload to (e.g. v2.4.0-beta)'
-        required: true
-        type: string
-
-permissions:
-  contents: write   # upload release assets
-  actions: read     # download artifacts from another run
-
-jobs:
-  publish:
-    name: Publish binaries to draft release
-    runs-on: ubuntu-latest
-    env:
-      GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      RUN_ID: ${{ inputs.run_id }}
-      TAG: ${{ inputs.tag }}
-    steps:
-      - name: Restrict to the release publisher
-        env:
-          PUBLISHER: ${{ vars.RELEASE_PUBLISHER }}
-        run: |
-          if [ -z "$PUBLISHER" ]; then
-            echo "::error::RELEASE_PUBLISHER repo variable is not set."
-            exit 1
-          fi
-          if [ "${{ github.actor }}" != "$PUBLISHER" ]; then
-            echo "::error::Only @$PUBLISHER may run this workflow (you are @${{ github.actor }})."
-            exit 1
-          fi
-          echo "Authorized: @${{ github.actor }}"
-
-      - name: Verify target is a draft release
-        run: |
-          if ! gh release view "$TAG" --repo "$GITHUB_REPOSITORY" --json isDraft >/dev/null 2>&1; then
-            echo "::error::Release '$TAG' not found. Create the draft (with this tag) first."
-            exit 1
-          fi
-          is_draft=$(gh release view "$TAG" --repo "$GITHUB_REPOSITORY" --json isDraft --jq '.isDraft')
-          if [ "$is_draft" != "true" ]; then
-            echo "::error::Release '$TAG' is published, not a draft. Aborting to avoid touching a live release."
-            exit 1
-          fi
-
-      - name: Verify source build run
-        run: |
-          info=$(gh run view "$RUN_ID" --repo "$GITHUB_REPOSITORY" --json workflowName,conclusion,headBranch)
-          name=$(echo "$info" | jq -r '.workflowName')
-          conclusion=$(echo "$info" | jq -r '.conclusion')
-          branch=$(echo "$info" | jq -r '.headBranch')
-          echo "Source run #$RUN_ID: '$name' on '$branch' (conclusion: $conclusion)"
-          if [ "$conclusion" != "success" ]; then
-            echo "::warning::Source run did not conclude 'success' ($conclusion). Some assets may be missing."
-          fi
-
-      - name: Download release artifacts from build run
-        run: |
-          gh run download "$RUN_ID" --repo "$GITHUB_REPOSITORY" --dir artifacts \
-            -p 'OrcaSlicer_Windows_*' \
-            -p 'OrcaSlicer_Mac_universal_*' \
-            -p 'OrcaSlicer_Linux_ubuntu_*' \
-            -p 'OrcaSlicer-Linux-flatpak_*' \
-            -p 'PDB'
-          echo "Downloaded artifact folders:"
-          ls -1 artifacts
-
-      - name: Assemble release assets
-        run: |
-          set -euo pipefail
-          mkdir -p upload
-
-          # gh run download auto-extracts each artifact into a folder, so the inner
-          # binaries are already unzipped. Copy the inner binary for each platform.
-          # -type f is required (some artifact *folders* are named "*.flatpak").
-
-          # Windows installer: the .exe inside the installer artifact, NOT the
-          # orca-slicer.exe that lives in the portable app folder.
-          find artifacts -type f -name '*.exe' -path '*OrcaSlicer_Windows_*' ! -path '*_portable*' -exec cp -v {} upload/ \;
-          # macOS universal DMG (profile-validator DMG isn't downloaded).
-          find artifacts -type f -name '*.dmg' -path '*OrcaSlicer_Mac_universal_*' -exec cp -v {} upload/ \;
-          # Linux AppImage.
-          find artifacts -type f -name '*.AppImage' -exec cp -v {} upload/ \;
-          # Flatpak bundles (x86_64 + aarch64).
-          find artifacts -type f -name '*.flatpak' -exec cp -v {} upload/ \;
-          # Windows debug symbols (PDB archive, for developers).
-          find artifacts -type f -name 'Debug_PDB_*.7z' -exec cp -v {} upload/ \;
-
-          # Portable Windows build is an unzipped folder artifact; re-zip it to the
-          # released filename (this one stays a .zip on the release).
-          portable_dir=$(find artifacts -maxdepth 1 -type d -name 'OrcaSlicer_Windows_*_portable' | head -n1)
-          if [ -n "${portable_dir:-}" ]; then
-            ( cd "$portable_dir" && zip -qr "$GITHUB_WORKSPACE/upload/$(basename "$portable_dir").zip" . )
-            echo "Zipped portable -> $(basename "$portable_dir").zip"
-          else
-            echo "::warning::Windows portable artifact not found."
-          fi
-
-          echo "Assets to upload:"
-          ls -lh upload
-          if [ -z "$(ls -A upload)" ]; then
-            echo "::error::No assets assembled. Check the run_id and that its artifacts haven't expired."
-            exit 1
-          fi
-
-      - name: Upload assets to draft release
-        run: |
-          gh release upload "$TAG" upload/* --repo "$GITHUB_REPOSITORY" --clobber
-          echo "Uploaded to draft release: $TAG"
-          gh release view "$TAG" --repo "$GITHUB_REPOSITORY" --json assets --jq '.assets[].name'

.gitignore

@@ -45,5 +45,4 @@ test.js
 .clangd
 internal_docs/
 *.flatpak
-/flatpak-repo/
-*.pyc
+/flatpak-repo/

CMakeLists.txt

@@ -220,9 +220,7 @@ if (MSVC)
     # /bigobj (Increase Number of Sections in .Obj file)
     # error C3859: virtual memory range for PCH exceeded; please recompile with a command line option of '-Zm90' or greater
     # Generate symbols at every build target, even for the release.
-	# -Zm520 fixes error C3859 but forces the compiler to pre-allocate that memory for every translation unit regardless
-	# combining /Zi with /FS frees up a significant amount of memory pressure across all parallel compile jobs and makes /MP faster overall.
-    add_compile_options(-bigobj /Zi /FS)
+    add_compile_options(-bigobj -Zm520 /Zi)
     # Disable STL4007: Many result_type typedefs and all argument_type, first_argument_type, and second_argument_type typedefs are deprecated in C++17.
     #FIXME Remove this line after eigen library adapts to the new C++17 adaptor rules.
     add_compile_options(-D_SILENCE_CXX17_ADAPTOR_TYPEDEFS_DEPRECATION_WARNING)
@@ -233,11 +231,6 @@ if (MSVC)
     # Disable warnings on comparison of unsigned and signed
     # C4018: signed/unsigned mismatch
     add_compile_options(/wd4018)
-    # Prevent linker restart when TBB (or other deps) built with /GL are linked
-	# Make your full (clean) build slower because it enables link-time code generation across all translation units.
-	# helps incremental builds by preventing the double-link restart from TBB
-    set(CMAKE_EXE_LINKER_FLAGS    "${CMAKE_EXE_LINKER_FLAGS} /LTCG")
-    set(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} /LTCG")
 endif ()
 
 if (${CMAKE_CXX_COMPILER_ID} STREQUAL "AppleClang" AND ${CMAKE_CXX_COMPILER_VERSION} VERSION_GREATER 15)
@@ -941,6 +934,9 @@ set (CPACK_PACKAGE_ICON "${CMAKE_SOURCE_DIR}/resources/images\\\\OrcaSlicer.ico"
 set (CPACK_NSIS_MUI_ICON "${CPACK_PACKAGE_ICON}")
 set (CPACK_NSIS_MUI_UNIICON "${CPACK_PACKAGE_ICON}")
 set (CPACK_NSIS_INSTALLED_ICON_NAME  "$INSTDIR\\\\orca-slicer.exe")
+set(CPACK_NSIS_EXTRA_INSTALL_COMMANDS "
+    CreateShortCut \\\"$DESKTOP\\\\OrcaSlicer.lnk\\\" \\\"$INSTDIR\\\\orca-slicer.exe\\\"
+")
 set (CPACK_PACKAGE_CHECKSUM SHA256)
 set (CPACK_PACKAGE_INSTALL_REGISTRY_KEY "OrcaSlicer")
 set (CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL ON)

README.md

@@ -15,20 +15,15 @@ Optimize your prints with ultra-fast slicing, intelligent support generation, an
 # Official links and community
 
 #### Official Website:
-
 <a href="https://www.orcaslicer.com/" style="font-size:2em;">OrcaSlicer.com</a>
 
 #### Github Repository:
-
 <a href="https://github.com/OrcaSlicer/OrcaSlicer"><img src="https://img.shields.io/badge/OrcaSlicer-181717?style=flat&logo=github&logoColor=white" width="200" alt="GitHub Logo"/> </a>
 
 #### Follow us:
-
-<a href="https://twitter.com/real_OrcaSlicer"><img src="https://img.shields.io/badge/real__OrcaSlicer-000000?style=flat&logo=x&logoColor=white" width="200" alt="X Logo"/> </a>  
-<a href="https://www.youtube.com/@OfficialOrcaSlicer"><img src="https://img.shields.io/badge/OfficialOrcaSlicer-FF0000?style=flat&logo=youtube&logoColor=white" width="200" alt="YouTube Logo"/> </a>
+<a href="https://twitter.com/real_OrcaSlicer"><img src="https://img.shields.io/badge/real__OrcaSlicer-000000?style=flat&logo=x&logoColor=white" width="200" alt="X Logo"/> </a>
 
 #### Join our Discord community:
-
 <a href="https://discord.gg/P4VE9UY9gJ"><img src="https://img.shields.io/badge/-Discord-5865F2?style=flat&logo=discord&logoColor=fff" width="200" alt="discord logo"/> </a>
 
 <table border="2" style="border-color: #ffa500; background-color:rgb(232, 220, 180); color: #856404;">
@@ -96,17 +91,17 @@ Explore the latest developments in OrcaSlicer with our nightly builds. Feedback
 
 Download the **Windows Installer exe**  for your preferred version from the [releases page](https://github.com/OrcaSlicer/OrcaSlicer/releases).
 
-- *For convenience there is also a portable build available.*
+ - *For convenience there is also a portable build available.*
     <details>
     <summary>Troubleshooting</summary>
 
-  - *If you have troubles to run the build, you might need to install following runtimes:*
-  - [MicrosoftEdgeWebView2RuntimeInstallerX64](https://github.com/OrcaSlicer/OrcaSlicer/releases/download/v1.0.10-sf2/MicrosoftEdgeWebView2RuntimeInstallerX64.exe)
-    - [Details of this runtime](https://aka.ms/webview2)
-    - [Alternative Download Link Hosted by Microsoft](https://go.microsoft.com/fwlink/p/?LinkId=2124703)
-  - [vcredist2019_x64](https://github.com/OrcaSlicer/OrcaSlicer/releases/download/v1.0.10-sf2/vcredist2019_x64.exe)
-    - [Alternative Download Link Hosted by Microsoft](https://aka.ms/vs/17/release/vc_redist.x64.exe)
-    - This file may already be available on your computer if you've installed visual studio.  Check the following location: `%VCINSTALLDIR%Redist\MSVC\v142`
+    - *If you have troubles to run the build, you might need to install following runtimes:*
+    - [MicrosoftEdgeWebView2RuntimeInstallerX64](https://github.com/OrcaSlicer/OrcaSlicer/releases/download/v1.0.10-sf2/MicrosoftEdgeWebView2RuntimeInstallerX64.exe)
+        - [Details of this runtime](https://aka.ms/webview2)
+        - [Alternative Download Link Hosted by Microsoft](https://go.microsoft.com/fwlink/p/?LinkId=2124703)
+    - [vcredist2019_x64](https://github.com/OrcaSlicer/OrcaSlicer/releases/download/v1.0.10-sf2/vcredist2019_x64.exe)
+        -  [Alternative Download Link Hosted by Microsoft](https://aka.ms/vs/17/release/vc_redist.x64.exe)
+        -  This file may already be available on your computer if you've installed visual studio.  Check the following location: `%VCINSTALLDIR%Redist\MSVC\v142`
     </details>
 
 Windows Package Manager
@@ -142,10 +137,9 @@ winget install --id=SoftFever.OrcaSlicer -e
             ![mac_security_setting](./SoftFever_doc/mac_security_setting.png)
     </details>
 
-## Linux
+## Linux         
 
 ### Flathub (Recommended)
-
 OrcaSlicer is available through FlatHub:
 
 <a href='https://flathub.org/apps/com.orcaslicer.OrcaSlicer'><img width='240' alt='Download on Flathub' src='https://dl.flathub.org/assets/badges/flathub-badge-en.png'/></a>
@@ -160,7 +154,6 @@ flatpak run com.orcaslicer.OrcaSlicer
 It can also be installed through graphical software managers (KDE Discover, GNOME Software, etc.) when Flathub is enabled. Search for **OrcaSlicer** in your software center.
 
 ### AppImage
-
  1. Download App image from the [releases page](https://github.com/OrcaSlicer/OrcaSlicer/releases).
  2. Double click the downloaded file to run it.
 
@@ -192,7 +185,7 @@ resolution: 0.1
 Their generous support enables me to purchase filaments and other essential 3D printing materials for the project.  
 Thank you! :)
 
-## Sponsors
+## Sponsors:
 
 <table>
 <tr>
@@ -215,8 +208,8 @@ Thank you! :)
 
 ## Support me
 
-<a href="https://github.com/sponsors/SoftFever"><img src="https://img.shields.io/badge/GitHub%20Sponsors-30363D?style=flat&logo=GitHub-Sponsors&logoColor=EA4AAA" height="50"></a>  
-<a href="https://ko-fi.com/G2G5IP3CP"><img src="https://img.shields.io/badge/Support_me_on_Ko--fi-FF5E5B?style=flat&logo=ko-fi&logoColor=white" height="50"></a>  
+<a href="https://github.com/sponsors/SoftFever"><img src="https://img.shields.io/badge/GitHub%20Sponsors-30363D?style=flat&logo=GitHub-Sponsors&logoColor=EA4AAA" height="50"></a>
+<a href="https://ko-fi.com/G2G5IP3CP"><img src="https://img.shields.io/badge/Support_me_on_Ko--fi-FF5E5B?style=flat&logo=ko-fi&logoColor=white" height="50"></a>
 <a href="https://paypal.me/softfever3d"><img src="https://img.shields.io/badge/PayPal-003087?style=flat&logo=paypal&logoColor=fff" height="50"></a>
 
 ## Some Background
@@ -228,7 +221,6 @@ OrcaSlicer began in that same spirit, drawing from BambuStudio, PrusaSlicer, and
 The OrcaSlicer logo was designed by community member [Justin Levine](https://github.com/jal-co).
 
 # License
-
 - **OrcaSlicer** is licensed under the GNU Affero General Public License, version 3.
 - The **GNU Affero General Public License**, version 3 ensures that if you use any part of this software in any way (even behind a web server), your software must be released under the same license.
 - OrcaSlicer includes a **pressure advance calibration pattern test** adapted from Andrew Ellis' generator, which is licensed under GNU General Public License, version 3. Ellis' generator is itself adapted from a generator developed by Sineos for Marlin, which is licensed under GNU General Public License, version 3.

deps_src/CMakeLists.txt

@@ -27,7 +27,6 @@ add_subdirectory(libigl)
 add_subdirectory(libnest2d)
 add_subdirectory(mcut)
 add_subdirectory(md4c)
-add_subdirectory(mdns)
 add_subdirectory(miniz)
 add_subdirectory(minilzo)
 add_subdirectory(qhull)

deps_src/mdns/CMakeLists.txt

@@ -1,19 +0,0 @@
-cmake_minimum_required(VERSION 3.13)
-
-project(mdns)
-
-# Static library wrapping mjansson/mdns (public domain) plus the cxmdns C++
-# wrapper from CrealityPrint v7.1.1 (AGPL-3.0). See NOTICE.md for attribution.
-add_library(mdns STATIC
-    mdns.h
-    mdns.c
-    cxmdns.h
-    cxmdns.cpp
-)
-
-target_include_directories(mdns SYSTEM PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
-
-if (MSVC)
-    # mjansson/mdns uses GetAdaptersAddresses (Iphlpapi) and Winsock2 (Ws2_32).
-    target_link_libraries(mdns PUBLIC Iphlpapi Ws2_32)
-endif()

deps_src/mdns/NOTICE.md

@@ -1,39 +0,0 @@
-# mDNS / DNS-SD library
-
-The four files in this directory implement mDNS / DNS-SD lookup and are
-vendored from third-party sources:
-
-## mdns.h, mdns.c
-
-mDNS / DNS-SD lookup library by Mattias Jansson. Originally released to
-the public domain at https://github.com/mjansson/mdns.
-
-The exact files here were taken from CrealityOfficial/CrealityPrint
-v7.1.1, which split the upstream header-only library into separate
-declaration (mdns.h) and implementation (mdns.c) files.
-
-- Source: https://github.com/mjansson/mdns
-- License: Public domain (no restrictions on use)
-
-## cxmdns.h, cxmdns.cpp
-
-Thin C++ wrapper over mdns.{h,c} that exposes a single function:
-
-  std::vector<machine_info> syncDiscoveryService(
-      const std::vector<std::string>& prefix);
-
-It sends a DNS-SD meta-discovery query (`_services._dns-sd._udp.local.`),
-listens for ~5 seconds, and returns `{ip, service_name}` for every
-service announcement whose name contains any of the given prefixes.
-
-OrcaSlicer uses this to find Creality K-series printers on the LAN
-(service-name prefix "Creality"), since K-series firmware announces
-each printer under a per-device-unique service type
-`_Creality-<MAC-derived-hex>._udp.local.` that no fixed-name query can
-target.
-
-- Source: CrealityOfficial/CrealityPrint v7.1.1
-  `src/slic3r/GUI/print_manage/utils/cxmdns.{h,cpp}`
-- License: GNU AGPL-3.0 (compatible with OrcaSlicer's AGPL-3.0; see
-  top-level LICENSE.txt)
-- Imported: 2026-05-19

deps_src/mdns/cxmdns.cpp

@@ -1,256 +0,0 @@
-#include"cxmdns.h"
-#include"mdns.h"
-#ifdef _WIN32
-#define _CRT_SECURE_NO_WARNINGS 1
-#endif
-
-#include <stdio.h>
-#include<string.h>
-#include <errno.h>
-#include <signal.h>
-
-#ifdef _WIN32
-#include <winsock2.h>
-#include <iphlpapi.h>
-#define sleep(x) Sleep(x * 1000)
-#else
-#include <netdb.h>
-#include <ifaddrs.h>
-#include <net/if.h>
-#endif
-
-// Alias some things to simulate recieving data to fuzz library
-#if defined(MDNS_FUZZING)
-#define recvfrom(sock, buffer, capacity, flags, src_addr, addrlen) ((mdns_ssize_t)capacity)
-#define printf
-#endif
-
-#include "mdns.h"
-
-#if defined(MDNS_FUZZING)
-#undef recvfrom
-#endif
-
-namespace cxnet
-{
-	template <typename F>
-	mdns_record_callback_fn lambda2function(F lambda)
-	{
-		static auto lambdabak = lambda;
-		return [](int sock, const struct sockaddr* from, size_t addrlen,
-			mdns_entry_type_t entry, uint16_t query_id, uint16_t rtype,
-			uint16_t rclass, uint32_t ttl, const void* data, size_t size,
-			size_t name_offset, size_t name_length, size_t record_offset,
-			size_t record_length, void* user_data)->int {lambdabak(sock, from, addrlen, entry, query_id, rtype, rclass, ttl, data, size, name_offset, name_length, record_offset, record_length, user_data); return 0; };
-	}
-
-	volatile sig_atomic_t running = 1;
-#ifdef _WIN32
-	BOOL console_handler(DWORD signal) {
-		if (signal == CTRL_C_EVENT) {
-			running = 0;
-		}
-		return TRUE;
-	}
-#else
-	void signal_handler(int signal) {
-		running = 0;
-	}
-#endif
-
-	void recvMachineInfoFromSocket(int sock, void* buffer, size_t capacity, const std::vector<std::string>& prefix, std::vector<machine_info>& retmachineInfos, int recIndex)
-	{
-		struct sockaddr_in6 addr;
-		struct sockaddr* saddr = (struct sockaddr*)&addr;
-		socklen_t addrlen = sizeof(addr);
-		memset(&addr, 0, sizeof(addr));
-#ifdef __APPLE__
-		saddr->sa_len = sizeof(addr);
-#endif
-		mdns_ssize_t ret = recvfrom(sock, (char*)buffer, (mdns_size_t)capacity, 0, saddr, &addrlen);
-		if (ret <= 0)
-			return;
-
-		size_t data_size = (size_t)ret;
-		//size_t records = 0;
-		const uint16_t* data = (uint16_t*)buffer;
-
-		uint16_t query_id = mdns_ntohs(data++);
-		uint16_t flags = mdns_ntohs(data++);
-		uint16_t questions = mdns_ntohs(data++);
-		uint16_t answer_rrs = mdns_ntohs(data++);
-		uint16_t authority_rrs = mdns_ntohs(data++);
-		uint16_t additional_rrs = mdns_ntohs(data++);
-
-		// According to RFC 6762 the query ID MUST match the sent query ID (which is 0 in our case)
-		if (query_id || (flags != 0x8400))
-			return;  // Not a reply to our question
-
-		// It seems some implementations do not fill the correct questions field,
-		// so ignore this check for now and only validate answer string
-		// if (questions != 1)
-		// 	return 0;
-
-		int i;
-		for (i = 0; i < questions; ++i) {
-			size_t offset = MDNS_POINTER_DIFF(data, buffer);
-			size_t verify_offset = 12;
-			// Verify it's our question, _services._dns-sd._udp.local.
-			if (!mdns_string_equal(buffer, data_size, &offset, mdns_services_query,
-				sizeof(mdns_services_query), &verify_offset))
-				return;
-			data = (const uint16_t*)MDNS_POINTER_OFFSET(buffer, offset);
-
-			uint16_t rtype = mdns_ntohs(data++);
-			uint16_t rclass = mdns_ntohs(data++);
-
-			// Make sure we get a reply based on our PTR question for class IN
-			if ((rtype != MDNS_RECORDTYPE_PTR) || ((rclass & 0x7FFF) != MDNS_CLASS_IN))
-				return;
-		}
-
-		for (i = 0; i < answer_rrs; ++i) {
-			size_t offset = MDNS_POINTER_DIFF(data, buffer);
-			size_t verify_offset = 12;
-			// Verify it's an answer to our question, _services._dns-sd._udp.local.
-			size_t name_offset = offset;
-			int is_answer = mdns_string_equal(buffer, data_size, &offset, mdns_services_query,
-				sizeof(mdns_services_query), &verify_offset);
-			if (!is_answer && !mdns_string_skip(buffer, data_size, &offset))
-				break;
-			size_t name_length = offset - name_offset;
-			if ((offset + 10) > data_size)
-				return;
-			data = (const uint16_t*)MDNS_POINTER_OFFSET(buffer, offset);
-
-			uint16_t rtype = mdns_ntohs(data++);
-			uint16_t rclass = mdns_ntohs(data++);
-			uint32_t ttl = mdns_ntohl(data);
-			data += 2;
-			uint16_t length = mdns_ntohs(data++);
-			if (length > (data_size - offset))
-				return;
-
-			static char addrbuf[64];
-			static char entrybuf[256];
-			static char namebuf[256];
-
-			if (is_answer) {
-				offset = MDNS_POINTER_DIFF(data, buffer);
-				(void)sizeof(sock);
-				(void)sizeof(query_id);
-				(void)sizeof(name_length);
-				//(void)sizeof(0);
-				mdns_string_t fromaddrstr = ip_address_to_string(addrbuf, sizeof(addrbuf), saddr, addrlen);
-				mdns_string_t entrystr =
-					mdns_string_extract(buffer, data_size, &name_offset, entrybuf, sizeof(entrybuf));
-				if (rtype == MDNS_RECORDTYPE_PTR) {
-					mdns_string_t namestr = mdns_record_parse_ptr(buffer, data_size, offset, length,
-						namebuf, sizeof(namebuf));
-					if (!namestr.str || namestr.length == 0) {
-						return;
-					}
-					const std::string answer_name(namestr.str, namestr.length);
-					bool bFound = false;
-					for (const auto& item : prefix)
-					{
-						if (answer_name.find(item) != std::string::npos)
-							bFound = true;
-					}
-					if (!bFound)
-					{
-						return;
-					}
-
-					char ip[16] = { 0 };
-					sscanf(fromaddrstr.str, "%[^:]", ip);
-					retmachineInfos.push_back({ ip, answer_name });
-				}
-			}
-		}
-	}
-
-	std::vector<machine_info> syncDiscoveryService(const std::vector<std::string>& prefix)
-	{
-		std::vector<machine_info> retmachineInfos;
-		const char* hostname = "cxslice-host";
-		// Initialize network environment
-#ifdef _WIN32
-		WORD versionWanted = MAKEWORD(1, 1);
-		WSADATA wsaData;
-		if (WSAStartup(versionWanted, &wsaData)) {
-			printf("Failed to initialize WinSock\n");
-			return retmachineInfos;
-		}
-		char hostname_buffer[256];
-		DWORD hostname_size = (DWORD)sizeof(hostname_buffer);
-		if (GetComputerNameA(hostname_buffer, &hostname_size))
-			hostname = hostname_buffer;
-		SetConsoleCtrlHandler(console_handler, TRUE);
-#else
-		char hostname_buffer[256];
-		size_t hostname_size = sizeof(hostname_buffer);
-		if (gethostname(hostname_buffer, hostname_size) == 0)
-			hostname = hostname_buffer;
-		signal(SIGINT, signal_handler);
-#endif
-		int sockets[32];
-		int num_sockets = open_client_sockets(sockets, sizeof(sockets) / sizeof(sockets[0]), 0);
-		if (num_sockets <= 0) {
-			printf("Failed to open any client sockets\n");
-#ifdef _WIN32
-			WSACleanup();
-#endif
-			return retmachineInfos;
-		}
-		printf("Opened %d socket%s for DNS-SD\n", num_sockets, num_sockets > 1 ? "s" : "");
-		printf("Sending DNS-SD discovery\n");
-		for (int isock = 0; isock < num_sockets; ++isock) {
-			if (mdns_discovery_send(sockets[isock]))
-				printf("Failed to send DNS-DS discovery: %s\n", strerror(errno));
-		}
-		size_t capacity = 2048;
-		void* buffer = malloc(capacity);
-		size_t recordNum = 0;
-		void* user_data = 0;
-
-		// This is a simple implementation that loops for 5 seconds or as long as we get replies
-		int res;
-		printf("Reading DNS-SD replies\n");
-		do {
-			struct timeval timeout;
-			timeout.tv_sec = 5;
-			timeout.tv_usec = 0;
-
-			int nfds = 0;
-			fd_set readfs;
-			FD_ZERO(&readfs);
-			for (int isock = 0; isock < num_sockets; ++isock) {
-				if (sockets[isock] >= nfds)
-					nfds = sockets[isock] + 1;
-				FD_SET(sockets[isock], &readfs);
-			}
-			res = select(nfds, &readfs, 0, 0, &timeout);
-			if (res > 0) {
-				for (int isock = 0; isock < num_sockets; ++isock) {
-					if (FD_ISSET(sockets[isock], &readfs)) {
-						//	records += mdns_discovery_recv(sockets[isock], buffer, capacity, query_callback,
-						//		0);
-						recvMachineInfoFromSocket(sockets[isock], buffer, capacity, prefix, retmachineInfos, isock);
-						recordNum++;
-					}
-				}
-			}
-		} while (res > 0);
-
-		free(buffer);
-		//
-		for (int isock = 0; isock < num_sockets; ++isock)
-			mdns_socket_close(sockets[isock]);
-		printf("Closed socket%s\n", num_sockets ? "s" : "");
-#ifdef _WIN32
-		WSACleanup();
-#endif
-		return std::move(retmachineInfos);
-	}
-}

deps_src/mdns/cxmdns.h

@@ -1,16 +0,0 @@
-#ifndef _CX_MDNS_H
-#define _CX_MDNS_H
-#include<string>
-#include<vector>
-
-namespace cxnet
-{
-	struct machine_info
-	{
-		std::string machineIp;
-		std::string answer;
-	};
-
-	std::vector<machine_info> syncDiscoveryService(const std::vector<std::string>& prefix);
-}
-#endif

doc/MixedFilament.md

@@ -0,0 +1,171 @@
+# Mixed Filament
+
+Ported from [OrcaSlicer-FullSpectrum](https://github.com/SoftFever/OrcaSlicer-FullSpectrum)
+with contributions from Rad, Justin Hayes, Calogero Guagenti, xSil3nt, and ratdoux.
+
+---
+
+## User Guide
+
+### What It Does
+
+Mixed Filament lets a single virtual filament slot alternate between two
+physical filaments across layers (or within a layer in Pointillisme mode),
+producing blended or gradient-like colours on single-extruder printers.
+
+### Enabling
+
+1. Load a multi-colour (multi-extruder) profile with at least 2 filaments.
+2. The **Mixed Filaments** panel appears automatically in the right-hand sidebar
+   when 2 or more filaments are configured.
+3. Each auto-generated row represents one pair of physical filaments.
+   Toggle a row to enable it; the total filament count grows to include the
+   virtual slot.
+
+### Sidebar Workflow
+
+- **Add** — creates a custom row for the same pair or a different ratio.
+- **Edit** — opens `MixedFilamentConfigPanel` to adjust ratio, pattern,
+  surface offset (bias), and distribution mode.
+- **Delete** — marks the row deleted; existing painted geometry retains its
+  virtual filament ID until you re-slice or repaint.
+
+Painting with a virtual filament ID behaves the same as painting with a
+physical one — use the Multi-Material Painting gizmo and select the virtual
+slot from the colour palette.
+
+### Color Match Dialog
+
+Open via the colour swatch on a mixed row. The dialog (`MixedFilamentColorMatchDialog`)
+shows a live preview strip of the blended result and lets you adjust ratio
+until the preview matches your target colour. The preview accounts for
+surface-offset bias when enabled.
+
+### Anti-Banding Options
+
+| Setting | What it does |
+|---|---|
+| `mixed_filament_advanced_dithering` | Uses an ordered dither pattern instead of simple A-then-B runs. Reduces stripe visibility on some hue pairs. More experimental than the default. |
+| `dithering_local_z_mode` | Splits each blended layer into two sub-layers whose heights are proportional to the mix ratio (e.g. 66/33 at 0.12 mm → 0.08 mm + 0.04 mm). Produces the smoothest colour gradients. |
+| `dithering_local_z_whole_objects` | Extends Local-Z splitting beyond painted masks to cover the entire object cross-section. Useful when mixed walls surround a painted zone. |
+| `dithering_local_z_direct_multicolor` | For rows with 3 or more physical components, allocates Local-Z sub-layers directly across all components with carry-over error correction instead of collapsing to pair cadence. More toolchanges; less banding. |
+
+### Gotchas
+
+- **Single-extruder warning** — Mixed Filament requires a physical toolchange
+  between the two components. On a true single-nozzle printer this means a
+  manual filament swap. Verify your printer profile supports `T0`/`T1` before
+  using mixed slots in a production print.
+- **Variable-layer interaction** — If Variable Layer Height is enabled, Local-Z
+  sub-layer heights are recomputed per interval. The mix ratio is preserved but
+  the absolute sub-layer heights change with the variable height. Review the
+  layer preview after applying variable layers.
+- **Custom sequence disabled** — OrcaSlicer's "custom toolchange sequence" is
+  suppressed when mixed filaments are active (`PlateSettingsDialog`). The
+  virtual-to-physical resolution must control toolchange order; a user-defined
+  sequence would break it.
+- **Stable IDs** — each mixed row carries a `stable_id` (64-bit). If you
+  reorder or delete rows and then load an older project, the ID remap in
+  `PresetBundle::update_mixed_filament_id_remap` translates painted geometry
+  to the correct new virtual slot. Do not rely on the 1-based filament index
+  as a stable identifier.
+
+---
+
+## Developer Guide
+
+### Core Data Structures
+
+```
+src/libslic3r/MixedFilament.hpp   — MixedFilament struct, MixedFilamentManager
+src/libslic3r/MixedFilament.cpp   — serialization, resolve(), auto_generate()
+src/libslic3r/LocalZOrderOptimizer.hpp — bucket-ordering helpers for Local-Z
+```
+
+The key scalar fields on `MixedFilament`:
+
+- `component_a`, `component_b` — 1-based physical filament indices.
+- `ratio_a`, `ratio_b` — layer-alternation cadence numerators.
+- `mix_b_percent` — nominal colour mix (used for Local-Z height computation
+  and the Color Match preview; does not change the cadence).
+- `stable_id` — monotonically increasing 64-bit ID assigned at construction.
+  Never reused. Survives serialization round-trips.
+- `distribution_mode` — selects between `Simple`, `SameLayerPointillisme`,
+  and `GroupedManual`.
+
+### Seam: Adding New Distribution Modes
+
+`MixedFilamentManager::resolve()` in `MixedFilament.cpp` is the single
+dispatch point that maps `(virtual_filament_id, num_physical, layer_index)`
+to a physical extruder. The current switch covers `Simple` and
+`SameLayerPointillisme`. A new mode is added by:
+
+1. Adding a value to the `MixedFilament::DistributionMode` enum in
+   `MixedFilament.hpp`.
+2. Adding a `case` to `MixedFilamentManager::resolve()` in `MixedFilament.cpp`.
+3. Serializing the new mode token in `serialize_custom_entries` /
+   `load_custom_entries` (format is a semicolon-delimited row string; see
+   existing tokens for the convention).
+
+G-code emission (`src/libslic3r/GCode/`) reads only the physical ID returned
+by `resolve()`, so new modes are automatically emitted without further changes.
+
+### Seam: New Toolchange-Cost Heuristics
+
+`LocalZOrderOptimizer` (`src/libslic3r/LocalZOrderOptimizer.hpp`) exposes:
+
+- `order_bucket_extruders(bucket, current, preferred_last)` — reorders a
+  single-layer bucket to minimise toolchanges given the current active extruder.
+- `order_pass_group(group, current_extruder)` — greedy walk across a set of
+  buckets (one per Local-Z sub-layer) to minimise total transitions.
+
+To add a new heuristic (e.g. cost-based look-ahead), replace or wrap
+`order_pass_group`. The caller in `PrintObjectSlice.cpp` passes the result
+directly into the sub-layer plan, so the heuristic is fully decoupled from
+the plan builder.
+
+### Seam: New Picker Shapes in the Color Map Panel
+
+`MixedFilamentColorMapPanel` (`src/slic3r/GUI/MixedFilamentColorMapPanel.hpp`)
+renders a 2-D colour map using a set of geometry "types" (currently strip and
+gradient). Each type is a small self-contained rendering path keyed by an enum
+value. New shapes are added by:
+
+1. Adding an enum value to `MixedFilamentColorMapPanel::GeometryType`.
+2. Implementing the corresponding `Paint*` helper (follow `PaintStrip` as a
+   template).
+3. Wiring the new type into the `switch` in `OnPaint`.
+
+### Persistence (3MF)
+
+The entire mixed-filament state is stored as a single string key
+`mixed_filament_definitions` in the project config block (section `[presets]`
+in the 3MF metadata).
+
+Round-trip path:
+
+```
+MixedFilamentManager::serialize_custom_entries()
+  called by PresetBundle::sync_mixed_filaments_to_config()
+  written by bbs_3mf: store_bbs_3mf → config.set("presets", "mixed_filament_definitions", ...)
+
+load_bbs_3mf → config.get("presets", "mixed_filament_definitions")
+  stored in project_config["mixed_filament_definitions"]
+  read by PresetBundle::sync_mixed_filaments_from_config()
+    → mixed_filaments.auto_generate(colours)
+    → mixed_filaments.load_custom_entries(defs, colours)
+```
+
+Auto-generated rows are *not* written to the definitions string; they are
+rebuilt from the filament colour list. Only `custom == true` rows are stored.
+
+See `tests/fff_print/test_mixed_filament_e2e.cpp` for regression tests
+covering this path.
+
+### ID Remap
+
+When filaments are added, removed, or reordered, virtual IDs shift.
+`PresetBundle::update_mixed_filament_id_remap(old_mixed, old_count, new_count)`
+produces a `remap` vector where `remap[old_virtual_id] = new_virtual_id`.
+Painted triangle mesh face data uses these IDs; the remap is applied in
+`TriangleSelectorMixed` after any filament list change.

doc/automation.md

@@ -1,668 +0,0 @@
-# OrcaSlicer UI Automation Protocol (v1.0.0)
-
-OrcaSlicer ships an **opt-in, localhost-only JSON-RPC server** that lets external
-scripts introspect, drive, and screenshot the running OrcaSlicer GUI. It is built
-for end-to-end testing and automation: a script can enumerate the live widget
-tree, click buttons, type text, send keyboard shortcuts, wait for UI state, query
-high-level application state, load models/projects into the running instance,
-switch the active view/tab, and capture window images (the on-screen capture
-includes the 3D viewport).
-
-This document is the protocol reference. It describes activation, the transport,
-the JSON-RPC envelope, every method, the unified node shape, the target/locator
-model, error codes, the set of instrumented automation ids, ImGui specifics,
-platform caveats, a quick-start snippet, and planned future work.
-
----
-
-## 1. Overview & activation
-
-The automation server is **OFF by default**. It is enabled with two
-command-line flags:
-
-| Flag | Meaning |
-|---|---|
-| `--automation-server` | Enable the automation server. |
-| `--automation-server-port=PORT` | Override the listening port. Optional; default is **13619**. |
-
-Example:
-
-```bash
-OrcaSlicer --automation-server --automation-server-port=13619 model.stl
-```
-
-The server binds to **`127.0.0.1` only** (the loopback interface). It is never
-exposed on an external network interface.
-
-**Security note (v1):** there is **no authentication token** in v1. The localhost
-bind is the *only* security boundary. Any process able to run code on the machine
-can connect to the port and drive the GUI — including injecting mouse and keyboard
-input — while the server is enabled. The feature is intended for testing and
-automation environments, not for production or shared/multi-user machines.
-
-When the server is enabled, OrcaSlicer emits a `warning`-level log line at startup
-to make the active input-injection surface obvious in logs, for example:
-
-```
-UI automation server ENABLED ... input injection is active
-```
-
----
-
-## 2. Transport
-
-The server speaks **HTTP/1.1** over the loopback TCP socket:
-
-| Request | Response |
-|---|---|
-| `POST /jsonrpc` with a JSON-RPC 2.0 request body | A JSON-RPC 2.0 response with `Content-Type: application/json`. |
-| `GET /` | A plain-text health page: `OrcaSlicer automation server v1.0.0` (`Content-Type: text/plain`). |
-| Anything else | HTTP `404 Not Found`. |
-
-The server is **single-client / serialized** in v1: it handles one request at a
-time on its own dedicated I/O thread. Connections are not kept alive; each request
-is answered and the socket is closed. Clients should issue requests sequentially.
-
----
-
-## 3. JSON-RPC envelope
-
-The protocol follows **JSON-RPC 2.0**.
-
-**Request:**
-
-```json
-{ "jsonrpc": "2.0", "id": <id>, "method": "<method>", "params": { ... } }
-```
-
-- `params` may be omitted; the server treats a missing `params` as an empty object.
-
-**Success response:**
-
-```json
-{ "jsonrpc": "2.0", "id": <id>, "result": { ... } }
-```
-
-**Error response:**
-
-```json
-{ "jsonrpc": "2.0", "id": <id>, "error": { "code": <int>, "message": "<string>" } }
-```
-
-The request `id` is echoed back in the response. When the request has no `id`, or
-when the request body cannot be parsed as JSON, the response `id` is `null`.
-
----
-
-## 4. Methods
-
-There are 12 methods. Capabilities advertised by `automation.version` list the 11
-callable feature methods (every method except `automation.version` itself).
-
-### `automation.version`
-
-Returns server identity and the list of supported methods. Takes no parameters.
-
-**Result:**
-
-```json
-{
-  "version": "1.0.0",
-  "protocol": "2.0",
-  "capabilities": [
-    "tree.dump", "tree.find", "widget.get", "input.click", "input.type",
-    "input.key", "sync.wait_for", "app.state", "screenshot.window", "file.open",
-    "view.select"
-  ]
-}
-```
-
-### `tree.dump`
-
-Snapshot the live UI tree as a single root node with nested children.
-
-**Params (all optional):**
-
-| Param | Type | Default | Meaning |
-|---|---|---|---|
-| `root` | string (id or path) | full tree | Root the dump at the node with this id/path. |
-| `max_depth` | int | `-1` | Maximum depth to descend. `-1` = unlimited. |
-| `visible_only` | bool | `false` | When true, omit non-visible nodes. |
-| `include_imgui` | bool | `true` | When true, include ImGui items. |
-
-**Result:** the serialized root [node](#5-unified-node-shape), with `children`
-included.
-
-### `tree.find`
-
-Find all nodes matching a [target predicate](#6-target--locator).
-
-**Params:** a target predicate — any combination of `name`, `class`, `label`,
-`value`, `backend` (provided fields are ANDed). The params object is the target
-itself (it is *not* wrapped in a `target` key for this method).
-
-**Result:** a **flat JSON array** of matching nodes. The nodes in this array are
-returned **without** their `children` (use `widget.get`/`tree.dump` to descend).
-
-### `widget.get`
-
-Fetch a single node by [target](#6-target--locator).
-
-**Params:**
-
-| Param | Type | Required | Meaning |
-|---|---|---|---|
-| `target` | object | yes | Target spec (id / path / predicate). |
-
-**Result:** a single [node](#5-unified-node-shape), with its `children` included.
-
-**Errors:** `1001` if the target is **not found** *or* **ambiguous** (more than one
-match).
-
-### `input.click`
-
-Click a resolved, actionable node.
-
-**Params:**
-
-| Param | Type | Default | Meaning |
-|---|---|---|---|
-| `target` | object | required | Target spec; must resolve to exactly one node. |
-| `button` | string | `"left"` | `"left"`, `"right"`, or `"middle"`. |
-| `double` | bool | `false` | Double-click when true. |
-| `modifiers` | array of string | `[]` | Held modifiers: any of `"ctrl"`, `"shift"`, `"alt"`, `"cmd"` (`"meta"` is accepted as an alias of `"cmd"`). |
-
-**Result:** `{ "ok": true }`.
-
-**Errors:** `1001` not found / ambiguous; `1002` if the target is disabled or
-hidden (not actionable). The click path raises and focuses the target's top-level
-window before injecting the click.
-
-### `input.type`
-
-Type text into the currently focused control.
-
-**Params:**
-
-| Param | Type | Required | Meaning |
-|---|---|---|---|
-| `text` | string | yes | The text to type. |
-| `target` | object | no | If given, this node is clicked first (to focus it) before typing. |
-
-**Result:** `{ "ok": true }`.
-
-**Errors:** if `target` is supplied, the same actionability errors as
-`input.click` apply (`1001` / `1002`).
-
-### `input.key`
-
-Send a key chord (a key plus optional modifiers) to the focused window.
-
-**Params:**
-
-| Param | Type | Required | Meaning |
-|---|---|---|---|
-| `keys` | string or array | yes | Either a `"+"`-joined string like `"ctrl+s"`, or an array like `["ctrl", "s"]`. The last token is the key; earlier tokens are modifiers. |
-
-**Result:** `{ "ok": true }`.
-
-**Key names must be lowercase.** Recognized key names include `"enter"`, `"tab"`,
-`"esc"`, `"space"`, `"delete"`, `"backspace"`, `"f5"` (and other function keys),
-and single characters (e.g. `"s"`, `"a"`). Recognized modifiers are `"ctrl"`,
-`"shift"`, `"alt"`, `"cmd"` (with `"meta"` as an alias for `"cmd"`).
-**Unrecognized or uppercase key names are silently ignored** — no error is
-returned, the key simply does not fire. Use lowercase names exclusively.
-
-### `sync.wait_for`
-
-Poll the UI until a target node reaches a desired state, or time out. This is the
-preferred way to synchronize with asynchronous UI changes (it replaces fragile
-fixed sleeps). Internally it repeatedly refreshes and dumps the tree, re-resolves
-the target, and evaluates the requested state until it is satisfied.
-
-**Params:**
-
-| Param | Type | Default | Meaning |
-|---|---|---|---|
-| `target` | object | required | Target spec. |
-| `state` | string | required | One of `"exists"`, `"visible"`, `"enabled"`, `"value"`. |
-| `value` | string | — | Required when `state` is `"value"`; the expected value to match. |
-| `timeout_ms` | int | `5000` | Maximum time to wait, in milliseconds. |
-| `poll_ms` | int | `100` | Poll interval, in milliseconds (minimum 1). |
-
-State semantics:
-
-- `exists` — the target resolves to a node.
-- `visible` — the node exists and is visible.
-- `enabled` — the node exists and is **both enabled and visible**.
-- `value` — the node has a value and that value equals the supplied `value`.
-
-**Result:** `{ "ok": true, "elapsed_ms": <int> }`.
-
-**Errors:** `1003` on timeout (the state was not reached within `timeout_ms`).
-
-### `app.state`
-
-Return a high-level application-state snapshot. Takes no parameters.
-
-**Result:**
-
-```json
-{
-  "active_tab": "<string>",
-  "project_loaded": <bool>,
-  "slicing": <bool>,
-  "slice_progress": <int>,
-  "foreground": <bool>,
-  "modal_dialog": "<string>"
-}
-```
-
-| Field | Meaning |
-|---|---|
-| `active_tab` | The active top-level tab/page. |
-| `project_loaded` | Whether a project/model is currently loaded. |
-| `slicing` | Whether slicing is currently in progress. |
-| `slice_progress` | Slicing progress (`-1` when unknown). |
-| `foreground` | Whether the main window is in the foreground. |
-| `modal_dialog` | Present only when a modal dialog is active; identifies it. Omitted otherwise. |
-
-### `screenshot.window`
-
-Capture a window as a PNG, exactly as it appears on screen.
-
-**Params:**
-
-| Param | Type | Default | Meaning |
-|---|---|---|---|
-| `target` | object | main frame | If given, capture this window; otherwise capture the main frame. |
-
-**Result:** `{ "png_base64": "<base64 PNG>", "width": <int>, "height": <int> }`.
-
-**Errors:** `1005` on screenshot failure; `1001` if a supplied `target` is not
-found or ambiguous.
-
-**How it works:** the window's on-screen rectangle is read back from the
-DWM-composited desktop framebuffer (`wxScreenDC`), so the capture includes every
-native child control, the OpenGL 3D viewport, and ImGui overlays — it is a faithful
-image of what the user sees. (Capturing the parent window's own client DC instead
-would clip out child HWNDs and the GL surface, leaving them black; that is why this
-method reads from the screen.)
-
-**Caveats:**
-
-- The window must be **visible and unobscured**. Because the source is the on-screen
-  framebuffer, any overlapping window occludes the captured region. The backend
-  raises the target window before capturing.
-- **HiDPI:** the reported `width`/`height` come from the window's logical client size,
-  while the screen framebuffer is in physical pixels. On per-monitor-DPI displays the
-  two can differ; the capture may be cropped or scaled relative to the logical size.
-- Because the capture is the live on-screen image, the 3D content reflects the
-  **current view**: the model in the 3D editor, or the gcode toolpaths in Preview
-  after a slice. There is no separate offscreen 3D-render method — the window
-  capture already includes whatever the GL canvas is showing.
-
-### `file.open`
-
-Load one or more files into the **already-running** instance at runtime, by calling
-`Plater::load_files(...)` directly on the GUI thread. This is the supported way to add
-or swap a model without relaunching the process. Loading is **synchronous**: when the
-call returns `ok: true`, `app.state().project_loaded` is already `true` (no polling
-race).
-
-**Params:**
-
-| Param | Type | Required | Meaning |
-|---|---|---|---|
-| `paths` | string or array of strings | yes | One or more **absolute** file paths. A bare string is accepted and treated as a one-element list. Paths are read from the **host (server) filesystem** — client and server are localhost-only. |
-
-`.3mf` files are routed as projects and meshes as models automatically, based on file
-content (the same default strategy as drag-drop); there is no `as_project` flag in v1.
-
-**Result:** `{ "ok": true, "loaded": <int> }`, where `loaded` is the number of objects
-added to the scene (`load_files(...).size()`).
-
-**Errors:**
-
-- `-32602` (invalid params) — `paths` is missing, is not a string/array, contains a
-  non-string entry, or yields no non-empty path.
-- `1007` (load failed) — `load_files` returned empty or threw (file not found, parse
-  error, or unsupported format).
-- `1004` (GUI busy) — the GUI-thread marshal timed out. An extremely large model can
-  exceed the marshal timeout and surface here; documented, not mitigated in v1.
-
-### `view.select`
-
-Switch the main window to a top-level view/tab at runtime. Useful to put the UI in a
-known state before other actions — e.g. switch to **Prepare** before loading a model,
-or to **Preview** after slicing.
-
-**Params:**
-
-| Param | Type | Required | Meaning |
-|---|---|---|---|
-| `view` | string | yes | The target view. One of: `home`, `prepare` (3D editor), `preview` (sliced G-code), `device`, `multi_device`, `project`, `calibration`. |
-
-**Result:** `{ "ok": true, "view": <string>, "index": <int> }`, where `index` is the
-resulting tab index (it can vary with layout, since some tabs — e.g. `multi_device` —
-are only present in certain configurations).
-
-**Errors:**
-
-- `-32602` (invalid params) — `view` is missing, is not a string, or is empty.
-- `1001` (not found) — the view name is unknown, or that view is not available in the
-  current layout (for example `prepare`/`preview` in G-code-viewer mode, or
-  `multi_device` when multi-device is disabled).
-- `1004` (GUI busy) — the GUI-thread marshal timed out.
-
----
-
-## 5. Unified node shape
-
-Both wx widgets and ImGui items are reported with the same node schema:
-
-```json
-{
-  "backend": "wx" | "imgui",
-  "id": "<string>",
-  "path": "<string>",
-  "class": "<string>",
-  "label": "<string>",
-  "rect": { "x": <int>, "y": <int>, "w": <int>, "h": <int> },
-  "enabled": <bool>,
-  "visible": <bool>,
-  "value": "<string>",
-  "children": [ <node>, ... ]
-}
-```
-
-| Field | Meaning |
-|---|---|
-| `backend` | `"wx"` for native wxWidgets controls, `"imgui"` for immediate-mode ImGui items. |
-| `id` | The automation id when one is set, otherwise a derived id. For ImGui items the `path` doubles as the `id`. |
-| `path` | Positional path, e.g. `"MainFrame/Panel[2]/Button[0]"`. For ImGui items: `"ImGui/<window>/<label>"`. |
-| `class` | wx class name, or the ImGui item type. |
-| `label` | The control's label/caption. May include an ImGui `##`-id suffix for ImGui items. |
-| `rect` | Bounding rectangle in **screen coordinates**. |
-| `enabled` | Whether the control is enabled. |
-| `visible` | Whether the control is visible. |
-| `value` | The control's value (text/choice/check/slider, etc.). **Omitted entirely** when the control has no applicable value. |
-| `children` | Child nodes. **wx only**, and present only when children are included (e.g. `tree.dump`, `widget.get`). ImGui items are flat (no children) and are listed under their window. |
-
-Notes:
-
-- The `value` key is **omitted** (not `null`) when the control has no value.
-- `children` is present only for wx nodes when children are requested; ImGui nodes
-  never carry `children`.
-
----
-
-## 6. Target / locator
-
-Most methods accept a **target** object that identifies one or more nodes. A
-target may specify:
-
-| Field | Meaning |
-|---|---|
-| `id` | Exact automation id. |
-| `path` | Exact positional path. |
-| `name` | Predicate: matches either the node's `id` **or** its `label`. |
-| `class` | Predicate: exact class name. |
-| `label` | Predicate: exact label. |
-| `value` | Predicate: node has a value and it equals this string. |
-| `backend` | Predicate: `"wx"` or `"imgui"`. |
-
-**Resolution order:** **`id` → `path` → predicate.**
-
-- If `id` is present, only `id` is used (exact match).
-- Else if `path` is present, only `path` is used (exact match).
-- Else the predicate fields (`name`, `class`, `label`, `value`, `backend`) are
-  used, and all provided predicate fields are **ANDed** together.
-
-Action methods (`input.click`, `input.type` with a target, `widget.get`, and
-single-target `screenshot.window`) require a **unique** match. If the target
-resolves to zero matches or more than one match, the call fails with error `1001`
-(not found / ambiguous). `tree.find` is the exception: it returns *all* matches as
-an array and never errors on ambiguity.
-
----
-
-## 7. Error codes
-
-Standard JSON-RPC codes:
-
-| Code | Meaning |
-|---|---|
-| `-32700` | Parse error — the request body was not valid JSON. |
-| `-32600` | Invalid request — missing/invalid `method`. |
-| `-32601` | Method not found — unknown method name. |
-| `-32602` | Invalid params — missing/invalid parameters for the method. |
-
-Application-specific codes:
-
-| Code | Meaning |
-|---|---|
-| `1001` | Widget/target not found **or** ambiguous (more than one match). |
-| `1002` | Not actionable — the target is disabled or hidden. |
-| `1003` | Wait timeout — `sync.wait_for` did not reach the requested state in time. |
-| `1004` | GUI thread busy / timeout — a backend call could not be marshaled onto the GUI thread in time (wedged GUI). |
-| `1005` | Screenshot failed. |
-| `1006` | Disabled. |
-| `1007` | Load failed — `file.open`'s `load_files` returned empty or threw (not found, parse error, unsupported format). |
-
----
-
-## 8. Automation-id naming conventions & instrumented ids
-
-Stable automation ids follow these prefix conventions:
-
-| Prefix | Used for |
-|---|---|
-| `btn_` | Buttons |
-| `combo_` | Preset combo boxes |
-| `tab_` | Tabs |
-| `canvas_` | Canvases |
-| `dlg_` | Dialog buttons |
-
-### Instrumented ids (as-built in v1)
-
-The following controls currently carry stable automation ids:
-
-| id | Control | Note |
-|---|---|---|
-| `btn_slice` | Slice-plate button | |
-| `btn_export` | Print / Export button | Multi-purpose: the action (Print plate / Export G-code / Send) depends on the current mode. |
-| `tab_device` | Device / Monitor tab (`MonitorPanel`) | |
-| `combo_printer` | Printer preset combo (sidebar) | |
-| `combo_filament` | Filament preset combo (sidebar) | First filament row only; extra multi-material rows are not instrumented. |
-| `canvas_3d` | 3D editor GL canvas | |
-
-### Controls NOT instrumented in v1
-
-Several controls are intentionally **not** instrumented in v1 because they have no
-stable `wxWindow` target to attach an id to:
-
-- **`combo_process`** — process settings are not a sidebar combo box in the current
-  OrcaSlicer layout, so there is no combo control to instrument.
-- **`btn_add`** — the add/import-object control is a `GLToolbar` item rendered
-  *inside* the GL canvas, not a `wxWindow`.
-- **`tab_prepare` / `tab_preview`** — the Prepare and Preview notebook pages are
-  both backed by the **same** window, and the per-tab buttons are private; there is
-  no distinct stable window to target.
-
-For controls that are not instrumented, scripts should fall back to class / label /
-path lookup (for wx controls) or ImGui-item lookup (for ImGui controls).
-
----
-
-## 9. ImGui notes
-
-ImGui is **immediate-mode**: an item is addressable only while it is being drawn in
-the current frame. The automation backend records ImGui items each frame, and a
-`refresh_ui` is forced before every read or action so that the latest frame's items
-are captured.
-
-Consequences and conventions:
-
-- Use [`sync.wait_for`](#syncwait_for) to wait for a transient gizmo or panel item
-  to appear before acting on it.
-- ImGui items are reported with `backend: "imgui"`, a `path` of the form
-  `ImGui/<window>/<label>`, and that **path doubles as the item's `id`** in v1.
-- ImGui items are **flat** — they have no `children` and are listed under their
-  window.
-- Labels may include ImGui `##`-id suffixes (the part after `##` that ImGui uses to
-  disambiguate identically labeled widgets).
-- Raw `ImGui::` gizmos that are *not* routed through the instrumented
-  `ImGuiWrapper` widgets (for example some Emboss / SVG / Text gizmo controls) are
-  only covered at the **window level** in v1; their individual sub-items are not
-  enumerated.
-
----
-
-## 10. Platform & display caveats
-
-- **Input requires a focused, visible window.** OS-level input injection uses
-  `wxUIActionSimulator`, which requires a focused, visible window. The click path
-  raises and focuses the target's top-level window first.
-- **Linux CI needs a display.** There must be an X display available; wrap test
-  runs with `xvfb-run` (for example, `xvfb-run -a python example_slice.py ...`).
-- **Input is asynchronous.** Do **not** rely on fixed sleeps. Use
-  [`sync.wait_for`](#syncwait_for) — for example, wait for `btn_export` to become
-  `enabled` after slicing completes — rather than sleeping for a guessed duration.
-- **`screenshot.window` reads the screen.** It captures the on-screen, DWM-composited
-  framebuffer, so the target window must be visible and unobscured, and the result is
-  in physical pixels (see HiDPI caveat under [`screenshot.window`](#screenshotwindow)).
-  The capture includes the GL 3D viewport as currently shown (model or toolpaths).
-- **Single-client / serialized.** v1 handles one request at a time; issue requests
-  sequentially from a single client.
-- **GUI-thread marshaling.** Every backend call is marshaled onto the GUI thread
-  with a timeout. A wedged or unresponsive GUI returns error `1004`.
-
----
-
-## 11. Quick start
-
-Using the reference client in `tools/automation/orca_automation.py`:
-
-```python
-from orca_automation import OrcaClient
-
-orca = OrcaClient(port=13619)
-print(orca.version())                       # {'version': '1.0.0', ...}
-
-orca.select_view("prepare")                 # switch to the 3D editor
-orca.open(r"C:\models\part.stl")            # load a model at runtime (synchronous)
-
-orca.click({"id": "btn_slice"})             # start slicing the plate
-orca.wait_for({"id": "btn_export"},         # wait until slicing finishes
-              state="enabled", timeout_ms=180000)
-
-orca.select_view("preview")                 # switch to the sliced G-code preview
-png = orca.screenshot()                     # on-screen capture (incl. 3D view)
-with open("window.png", "wb") as f:
-    f.write(png)
-```
-
-For a full, runnable end-to-end example — launching OrcaSlicer with the automation
-flags, loading a model, slicing, waiting for completion, and saving a window PNG —
-see `tools/automation/example_slice.py`.
-
----
-
-## 12. Future work
-
-Planned enhancements beyond v1:
-
-- **Authentication token** plus a Preferences toggle to enable/disable the server
-  from the GUI.
-- **WebSocket push events** for real-time UI/state notifications (instead of
-  polling).
-- **Per-item ImGui gizmo instrumentation** so individual gizmo sub-controls (Emboss
-  / SVG / Text, etc.) are addressable, not just at the window level.
-- **More widget ids** — the process combo, the add/import button, and the
-  Prepare/Preview tabs once they expose stable windows.
-- An **MCP wrapper** to expose the automation surface to model-context tooling.
-
----
-
-## Verification (v1)
-
-This section records the final regression gate for the v1 feature: confirmation
-that the protocol core is covered by unit tests, that the existing test suites
-are unaffected, and that the **disabled path (automation OFF, the default) is a
-true no-op** — zero new threads, zero socket binds, zero allocations, and zero
-behavior change.
-
-### Unit-suite results (Release, Windows / MSVC, Ninja Multi-Config)
-
-| Suite | Result |
-|---|---|
-| `automation` (protocol core) | **32 / 32 passed** |
-| `libslic3r` (most affected by the additive `PrintConfig.cpp` CLI options) | **99 / 99 passed** |
-| `fff_print` | **14 / 14 passed** |
-| `libnest2d` | **14 / 14 passed** |
-| `sla_print` | **21 / 21 passed** |
-| `slic3rutils` | 3 / 5 passed — 2 pre-existing `[OrcaCloudServiceAgent]` SEGFAULTs, **unrelated to automation** (see note) |
-
-> The two `slic3rutils` failures are `Orca cloud flat/nested session resolves
-> display name consistently`. They exercise `Slic3r::OrcaCloudServiceAgent`, which
-> the automation branch does **not** touch (verified via `git diff --stat
-> main...HEAD` — no change to `src/slic3r/Utils/OrcaCloudServiceAgent.*` or
-> `tests/slic3rutils/*`). They are pre-existing and not a regression introduced by
-> this feature.
-
-### Static disabled-path audit (the core regression guarantee)
-
-Verified by code reading that with no `--automation-server` flag:
-
-- **Flag defaults off.** `m_automation_port` defaults to `0`
-  (`src/slic3r/GUI/GUI_App.hpp:249`); `is_automation_enabled()` returns
-  `m_automation_port > 0` (`GUI_App.hpp:386`) → `false` by default.
-- **No server / thread / socket.** `post_init()` calls
-  `start_automation_server()` **only** when
-  `init_params->automation_port > 0` (`src/slic3r/GUI/GUI_App.cpp:737-740`), and
-  `start_automation_server()` itself early-returns when `m_automation_port <= 0`
-  (`GUI_App.cpp:7097`). The backend / dispatcher / beast server objects are
-  constructed nowhere else → no `orca_automation` thread and no localhost bind
-  when the flag is absent.
-- **Recording hooks short-circuit.** `ImGuiWrapper::automation_record_last_item`
-  has as its **first statement** `if (!wxGetApp().is_automation_enabled())
-  return;` (`src/slic3r/GUI/ImGuiWrapper.cpp:576-577`) — a single bool check, no
-  `ImGuiItemRecord` allocation and no `ImGuiItemTable` access on the disabled
-  path. In `ImGuiWrapper::render()` the window-enumeration loop and
-  `swap_frame()` are fully wrapped in `if (wxGetApp().is_automation_enabled())`
-  (`ImGuiWrapper.cpp:599-611`); when off, `render()` is its original
-  `ImGui::Render()` + `render_draw_data()` plus one bool check.
-- **Instrumentation is inert.** The ~7 `set_automation_id(...)` calls
-  (`MainFrame.cpp:1330,1389,1841,1842`; `Plater.cpp:1772,2172,5068`) only store a
-  pointer into a static registry and bind a `wxEVT_DESTROY` pruning handler
-  (`src/slic3r/GUI/Automation/AutomationRegistry.cpp:24-36`). The registry is
-  **read** only via `window_for_automation_id` / `automation_id_of`, which are
-  called solely by the backend while the server is running → harmless when off.
-- **CLI options are purely additive.** `automation_server` (coBool, default
-  `false`) and `automation_server_port` (coInt, default `13619`) are new `add()`
-  entries appended after `enable_timelapse`
-  (`src/libslic3r/PrintConfig.cpp:10794-10805`); no existing option is changed.
-  `GUI_InitParams::automation_port` defaults to `0`
-  (`src/slic3r/GUI/GUI_Init.hpp:37`) and is set only when `--automation-server`
-  is supplied (`src/OrcaSlicer.cpp:1345-1348`).
-
-**Conclusion:** with automation OFF (the default), the feature allocates nothing
-and changes nothing — the only added cost on any hot path is a single boolean
-comparison.
-
-### Deferred manual runtime checks (require a display / Xvfb)
-
-These need a live GUI and cannot be run headlessly in CI; they are the manual
-acceptance steps:
-
-1. Launch **without** `--automation-server` → `curl http://127.0.0.1:13619/`
-   fails to connect (no listener); no `orca_automation` thread exists.
-2. Launch **with** `--automation-server --automation-server-port=13619` →
-   `GET /` returns the health text; `POST /jsonrpc {"method":"automation.version"}`
-   returns version / protocol / capabilities; `widget.get {"target":{"id":"btn_slice"}}`
-   returns a node with a sensible screen rect.
-3. Interactive sanity: open a gizmo / move sliders with automation OFF → no
-   visual or behavior change.
-
-See `tools/automation/example_slice.py` for the runnable end-to-end path.

docs/superpowers/plans/2026-06-03-orcaslicer-file-open-method.md

@@ -1,608 +0,0 @@
-# `file.open` Automation Method Implementation Plan
-
-> **For agentic workers:** REQUIRED SUB-SKILL: Use superpowers:subagent-driven-development (recommended) or superpowers:executing-plans to implement this plan task-by-task. Steps use checkbox (`- [ ]`) syntax for tracking.
-
-**Goal:** Add a `file.open` JSON-RPC automation method that loads one or more files into an already-running OrcaSlicer instance by calling `Plater::load_files(...)` synchronously on the GUI thread.
-
-**Architecture:** Follows the existing `screenshot.window` / `app.state` method pattern. A new pure-virtual `open_files(paths)` is added to the wx-free `IUiBackend` interface; `WxUiBackend` implements it via the existing `run_on_gui(...)` GUI-thread marshal calling `Plater::load_files`; the `JsonRpcDispatcher` gains a `file.open` route, a param-parsing helper, and a new `kErrLoadFailed = 1007` error code. The unit-testable surface (dispatcher + param validation + routing) is driven against `MockUiBackend`.
-
-**Tech Stack:** C++17, nlohmann::json, Catch2 v2 (`catch_all.hpp` / `Catch2WithMain`), wxWidgets, CMake + Ninja Multi-Config. Python 3 reference client (stdlib only).
-
----
-
-## Design-spec note (resolve before coding)
-
-The design spec's error table reads `1002 | kInvalidParams | paths missing/empty…`, but in the codebase `kInvalidParams` is the standard JSON-RPC code **`-32602`**, while `1002` is `kErrNotActionable`. The spec's **Constant column (`kInvalidParams`) is authoritative** and matches every other param-validation path in the dispatcher (e.g. `m_input_type` throws `kInvalidParams` for a bad `text`). This plan therefore validates `file.open` params with **`kInvalidParams` (-32602)**, exactly like the existing handlers, and the tests assert `== kInvalidParams`. The literal "1002" in the spec is a typo; do not emit code 1002 for param errors.
-
-## File Structure
-
-| File | Change | Responsibility |
-|---|---|---|
-| `src/slic3r/GUI/Automation/IUiBackend.hpp` | modify | Add pure-virtual `int open_files(paths)` to the backend abstraction (stays wx-free). |
-| `src/slic3r/GUI/Automation/JsonRpcDispatcher.hpp` | modify | Add `kErrLoadFailed = 1007` constant + `m_file_open` declaration. |
-| `src/slic3r/GUI/Automation/JsonRpcDispatcher.cpp` | modify | Add `parse_paths` helper, `m_file_open` body, dispatch route, capabilities entry. |
-| `src/slic3r/GUI/Automation/WxUiBackend.hpp` | modify | Declare `open_files` override. |
-| `src/slic3r/GUI/Automation/WxUiBackend.cpp` | modify | Implement `open_files` via `run_on_gui` → `Plater::load_files`. |
-| `tests/automation/MockUiBackend.hpp` | modify | `open_files` override: record paths + return-count + fail knob. |
-| `tests/automation/test_dispatcher.cpp` | modify | Catch2 tests for routing, string/array, validation, failure, capabilities. |
-| `tools/automation/orca_automation.py` | modify | `open(self, paths)` client wrapper. |
-| `tools/automation/example_slice.py` | modify | Launch without a model arg, then `orca.open([model])`. |
-| `doc/automation.md` | modify | Document the method, capabilities, error `1007`. |
-
-**Build/test layout:** Ninja Multi-Config in `build/`. The unit suite target is `automation_tests`; its sources (`tests/automation/CMakeLists.txt`) compile `JsonRpcDispatcher.cpp` + `MockUiBackend` but **not** `WxUiBackend.cpp`. So dispatcher/mock changes are fully unit-testable headlessly; `WxUiBackend.cpp` is verified by the full app build only.
-
----
-
-## Task 1: Extend the backend abstraction (interface + mock + error code)
-
-Adds the `open_files` contract so tests can be written. Adding a pure virtual to `IUiBackend` forces every implementation to provide it — in the unit-test target that is only `MockUiBackend`, so this task keeps the `automation_tests` build green.
-
-**Files:**
-- Modify: `src/slic3r/GUI/Automation/IUiBackend.hpp`
-- Modify: `src/slic3r/GUI/Automation/JsonRpcDispatcher.hpp:19`
-- Modify: `tests/automation/MockUiBackend.hpp`
-
-- [ ] **Step 1: Add the error constant**
-
-In `src/slic3r/GUI/Automation/JsonRpcDispatcher.hpp`, after the existing `kErrDisabled` line (currently line 19), add:
-
-```cpp
-constexpr int kErrDisabled        = 1006;
-constexpr int kErrLoadFailed      = 1007; // file.open: load_files returned empty / threw
-```
-
-- [ ] **Step 2: Add the pure-virtual `open_files` to the interface**
-
-In `src/slic3r/GUI/Automation/IUiBackend.hpp`, inside `class IUiBackend`, immediately after the `screenshot_window` pure virtual (currently line 97), add:
-
-```cpp
-    // Load one or more files (absolute paths) into the running instance on the GUI
-    // thread. Returns the number of objects added to the scene (load_files(...).size()).
-    // Throws AutomationError(kErrLoadFailed) when nothing loads. Header stays wx-free:
-    // the concrete LoadStrategy is chosen inside WxUiBackend, not exposed here.
-    virtual int open_files(const std::vector<std::string>& paths) = 0;
-```
-
-- [ ] **Step 3: Implement `open_files` in the mock with record + knobs**
-
-In `tests/automation/MockUiBackend.hpp`: add an include for the error constant near the top (after the `IUiBackend.hpp` include on line 2):
-
-```cpp
-#include "slic3r/GUI/Automation/IUiBackend.hpp"
-#include "slic3r/GUI/Automation/JsonRpcDispatcher.hpp" // kErrLoadFailed
-```
-
-Add recorded-call + canned-output members. After the `screenshot_window_count` recorded field (line 20) add:
-
-```cpp
-    int               screenshot_window_count   = 0;
-    std::vector<std::vector<std::string>> opened_paths; // paths of each open_files()
-```
-
-After the `click_result` canned field (line 26) add:
-
-```cpp
-    bool     click_result = true;
-    int      open_return_count = 0;     // value open_files() returns
-    bool     open_should_fail = false;  // when true, open_files() throws kErrLoadFailed
-```
-
-Add the override next to the other overrides, after `screenshot_window` (lines 49-51):
-
-```cpp
-    PngImage screenshot_window(const UiNode*) override {
-        ++screenshot_window_count; return canned_png;
-    }
-    int      open_files(const std::vector<std::string>& paths) override {
-        opened_paths.push_back(paths);
-        if (open_should_fail)
-            throw AutomationError(kErrLoadFailed, "mock load failed");
-        return open_return_count;
-    }
-```
-
-- [ ] **Step 4: Build the unit-test target to confirm it still compiles**
-
-Run: `cmake --build build --config RelWithDebInfo --target automation_tests`
-Expected: build succeeds (the new pure virtual is satisfied by the mock; no behavior change yet).
-
-- [ ] **Step 5: Commit**
-
-```bash
-git add src/slic3r/GUI/Automation/IUiBackend.hpp src/slic3r/GUI/Automation/JsonRpcDispatcher.hpp tests/automation/MockUiBackend.hpp
-git commit -m "feat(automation): add open_files to backend interface + kErrLoadFailed (1007)"
-```
-
----
-
-## Task 2: `file.open` dispatcher handler (parse, route, validate, fail)
-
-Implements the full JSON-RPC handler against the mock: param parsing (string or array), validation, routing to `open_files`, and `kErrLoadFailed` propagation.
-
-**Files:**
-- Modify: `src/slic3r/GUI/Automation/JsonRpcDispatcher.hpp:49` (declaration)
-- Modify: `src/slic3r/GUI/Automation/JsonRpcDispatcher.cpp`
-- Test: `tests/automation/test_dispatcher.cpp`
-
-- [ ] **Step 1: Write the failing happy-path test (array of paths)**
-
-Append to `tests/automation/test_dispatcher.cpp`:
-
-```cpp
-TEST_CASE("file.open with an array of paths routes to backend", "[automation][rpc]") {
-    MockUiBackend mock;
-    mock.open_return_count = 3;
-    JsonRpcDispatcher d(mock);
-    const json resp = d.dispatch({{"jsonrpc","2.0"},{"id",1},{"method","file.open"},
-        {"params",{{"paths", json::array({"C:/abs/a.stl","C:/abs/b.stl"})}}}});
-    CHECK(resp.at("result").at("ok") == true);
-    CHECK(resp.at("result").at("loaded") == 3);
-    REQUIRE(mock.opened_paths.size() == 1);
-    REQUIRE(mock.opened_paths[0].size() == 2);
-    CHECK(mock.opened_paths[0][0] == "C:/abs/a.stl");
-    CHECK(mock.opened_paths[0][1] == "C:/abs/b.stl");
-}
-```
-
-- [ ] **Step 2: Run the test to verify it fails**
-
-Run: `cmake --build build --config RelWithDebInfo --target automation_tests && build/tests/automation/RelWithDebInfo/automation_tests.exe "file.open with an array of paths routes to backend"`
-Expected: FAIL — `file.open` is an unknown method, so the response carries `error.code == -32601` and has no `result` (the `resp.at("result")` access throws). (If the exe path differs on your machine, locate it with `find build -iname automation_tests.exe`.)
-
-- [ ] **Step 3: Declare the handler**
-
-In `src/slic3r/GUI/Automation/JsonRpcDispatcher.hpp`, after the `m_screenshot_window` declaration (currently line 49) add:
-
-```cpp
-    nlohmann::json m_screenshot_window(const nlohmann::json& params);
-    nlohmann::json m_file_open(const nlohmann::json& params);
-```
-
-- [ ] **Step 4: Add the `parse_paths` helper and `m_file_open` body**
-
-In `src/slic3r/GUI/Automation/JsonRpcDispatcher.cpp`, add a `parse_paths` helper. Place it in the anonymous namespace that also holds `parse_keys` — insert it right before that namespace's closing `} // namespace` (currently line 130):
-
-```cpp
-// "paths" may be a single string ("C:/a.stl") or an array of strings. Returns the
-// non-empty absolute paths; throws kInvalidParams when paths is missing, not a
-// string/array, contains a non-string entry, or yields no non-empty path.
-std::vector<std::string> parse_paths(const nlohmann::json& params) {
-    if (!params.is_object() || !params.contains("paths"))
-        throw AutomationError(kInvalidParams, "file.open requires 'paths'");
-    const auto& p = params.at("paths");
-    std::vector<std::string> out;
-    if (p.is_string()) {
-        out.push_back(p.get<std::string>());
-    } else if (p.is_array()) {
-        for (const auto& e : p) {
-            if (!e.is_string())
-                throw AutomationError(kInvalidParams, "'paths' entries must be strings");
-            out.push_back(e.get<std::string>());
-        }
-    } else {
-        throw AutomationError(kInvalidParams, "'paths' must be a string or array");
-    }
-    out.erase(std::remove_if(out.begin(), out.end(),
-                             [](const std::string& s) { return s.empty(); }),
-              out.end());
-    if (out.empty())
-        throw AutomationError(kInvalidParams, "'paths' is empty");
-    return out;
-}
-```
-
-(`<algorithm>` for `std::remove_if` is already included at the top of the file, line 4.)
-
-Add the handler body next to the other handlers. After `m_screenshot_window` (currently ends line 343, just before the final `}}} // namespace`), add:
-
-```cpp
-nlohmann::json JsonRpcDispatcher::m_file_open(const nlohmann::json& params) {
-    const std::vector<std::string> paths = parse_paths(params);
-    const int loaded = m_backend.open_files(paths);
-    return { {"ok", true}, {"loaded", loaded} };
-}
-```
-
-- [ ] **Step 5: Add the dispatch route**
-
-In `JsonRpcDispatcher::dispatch`, after the `screenshot.window` route (currently line 195) add:
-
-```cpp
-        if (method == "screenshot.window")         return make_result(id, m_screenshot_window(params));
-        if (method == "file.open")                 return make_result(id, m_file_open(params));
-```
-
-- [ ] **Step 6: Run the happy-path test to verify it passes**
-
-Run: `cmake --build build --config RelWithDebInfo --target automation_tests && build/tests/automation/RelWithDebInfo/automation_tests.exe "file.open with an array of paths routes to backend"`
-Expected: PASS — 1 test case, all assertions passed.
-
-- [ ] **Step 7: Add the remaining handler tests (string, validation, failure)**
-
-Append to `tests/automation/test_dispatcher.cpp`:
-
-```cpp
-TEST_CASE("file.open accepts a bare string path", "[automation][rpc]") {
-    MockUiBackend mock;
-    mock.open_return_count = 1;
-    JsonRpcDispatcher d(mock);
-    const json resp = d.dispatch({{"jsonrpc","2.0"},{"id",2},{"method","file.open"},
-        {"params",{{"paths","C:/abs/a.stl"}}}});
-    CHECK(resp.at("result").at("loaded") == 1);
-    REQUIRE(mock.opened_paths.size() == 1);
-    REQUIRE(mock.opened_paths[0].size() == 1);
-    CHECK(mock.opened_paths[0][0] == "C:/abs/a.stl");
-}
-
-TEST_CASE("file.open with missing paths -> invalid params", "[automation][rpc]") {
-    MockUiBackend mock;
-    JsonRpcDispatcher d(mock);
-    const json resp = d.dispatch({{"jsonrpc","2.0"},{"id",3},{"method","file.open"},
-        {"params", json::object()}});
-    CHECK(resp.at("error").at("code") == kInvalidParams);
-    CHECK(mock.opened_paths.empty());
-}
-
-TEST_CASE("file.open with empty paths array -> invalid params", "[automation][rpc]") {
-    MockUiBackend mock;
-    JsonRpcDispatcher d(mock);
-    const json resp = d.dispatch({{"jsonrpc","2.0"},{"id",4},{"method","file.open"},
-        {"params",{{"paths", json::array()}}}});
-    CHECK(resp.at("error").at("code") == kInvalidParams);
-    CHECK(mock.opened_paths.empty());
-}
-
-TEST_CASE("file.open with a non-string entry -> invalid params", "[automation][rpc]") {
-    MockUiBackend mock;
-    JsonRpcDispatcher d(mock);
-    const json resp = d.dispatch({{"jsonrpc","2.0"},{"id",5},{"method","file.open"},
-        {"params",{{"paths", json::array({"C:/a.stl", 42})}}}});
-    CHECK(resp.at("error").at("code") == kInvalidParams);
-    CHECK(mock.opened_paths.empty());
-}
-
-TEST_CASE("file.open backend load failure -> 1007", "[automation][rpc]") {
-    MockUiBackend mock;
-    mock.open_should_fail = true;
-    JsonRpcDispatcher d(mock);
-    const json resp = d.dispatch({{"jsonrpc","2.0"},{"id",6},{"method","file.open"},
-        {"params",{{"paths","C:/abs/a.stl"}}}});
-    CHECK(resp.at("error").at("code") == kErrLoadFailed);
-}
-```
-
-- [ ] **Step 8: Run all file.open tests to verify they pass**
-
-Run: `cmake --build build --config RelWithDebInfo --target automation_tests && build/tests/automation/RelWithDebInfo/automation_tests.exe "file.open*"`
-Expected: PASS — 6 test cases, all assertions passed.
-
-- [ ] **Step 9: Commit**
-
-```bash
-git add src/slic3r/GUI/Automation/JsonRpcDispatcher.hpp src/slic3r/GUI/Automation/JsonRpcDispatcher.cpp tests/automation/test_dispatcher.cpp
-git commit -m "feat(automation): add file.open dispatcher handler with validation + tests"
-```
-
----
-
-## Task 3: Advertise `file.open` in `automation.version` capabilities
-
-**Files:**
-- Modify: `src/slic3r/GUI/Automation/JsonRpcDispatcher.cpp:166-172`
-- Test: `tests/automation/test_dispatcher.cpp`
-
-- [ ] **Step 1: Write the failing capabilities test**
-
-Append to `tests/automation/test_dispatcher.cpp`:
-
-```cpp
-TEST_CASE("automation.version capabilities include file.open", "[automation][rpc]") {
-    MockUiBackend mock;
-    JsonRpcDispatcher d(mock);
-    const json resp = d.dispatch({{"jsonrpc","2.0"},{"id",1},{"method","automation.version"}});
-    const auto& caps = resp.at("result").at("capabilities");
-    bool found = false;
-    for (const auto& c : caps) if (c == "file.open") found = true;
-    CHECK(found);
-}
-```
-
-- [ ] **Step 2: Run the test to verify it fails**
-
-Run: `cmake --build build --config RelWithDebInfo --target automation_tests && build/tests/automation/RelWithDebInfo/automation_tests.exe "automation.version capabilities include file.open"`
-Expected: FAIL — `CHECK(found)` is false; `file.open` is not yet in the capabilities array.
-
-- [ ] **Step 3: Add `file.open` to the capabilities array**
-
-In `JsonRpcDispatcher::m_version` (currently lines 166-172), add `"file.open"` to the array:
-
-```cpp
-nlohmann::json JsonRpcDispatcher::m_version(const nlohmann::json&) {
-    return { {"version", kAutomationVersion},
-             {"protocol", "2.0"},
-             {"capabilities", nlohmann::json::array({
-                 "tree.dump","tree.find","widget.get","input.click","input.type",
-                 "input.key","sync.wait_for","app.state","screenshot.window",
-                 "file.open" })} };
-}
-```
-
-- [ ] **Step 4: Run the test to verify it passes**
-
-Run: `cmake --build build --config RelWithDebInfo --target automation_tests && build/tests/automation/RelWithDebInfo/automation_tests.exe "automation.version capabilities include file.open"`
-Expected: PASS.
-
-- [ ] **Step 5: Run the whole automation suite to confirm no regressions**
-
-Run: `cmake --build build --config RelWithDebInfo --target automation_tests && build/tests/automation/RelWithDebInfo/automation_tests.exe --order rand --warn NoAssertions`
-Expected: PASS — all cases green (the pre-existing ~32 plus the 7 new `file.open`/capabilities cases ≈ 39).
-
-- [ ] **Step 6: Commit**
-
-```bash
-git add src/slic3r/GUI/Automation/JsonRpcDispatcher.cpp tests/automation/test_dispatcher.cpp
-git commit -m "feat(automation): advertise file.open in automation.version capabilities"
-```
-
----
-
-## Task 4: Implement `WxUiBackend::open_files` (real GUI-thread load)
-
-Not covered by the headless unit suite (`WxUiBackend.cpp` is excluded from `automation_tests`); verified by the full app build + the manual runtime check in Task 8.
-
-**Files:**
-- Modify: `src/slic3r/GUI/Automation/WxUiBackend.hpp:21`
-- Modify: `src/slic3r/GUI/Automation/WxUiBackend.cpp`
-
-- [ ] **Step 1: Declare the override**
-
-In `src/slic3r/GUI/Automation/WxUiBackend.hpp`, after the `screenshot_window` declaration (line 21) add:
-
-```cpp
-    PngImage screenshot_window(const UiNode* target) override;
-    int      open_files(const std::vector<std::string>& paths) override;
-```
-
-- [ ] **Step 2: Implement `open_files`**
-
-In `src/slic3r/GUI/Automation/WxUiBackend.cpp`, add the implementation just before the final `}}} // namespace Slic3r::GUI::Automation` (currently line 306):
-
-```cpp
-int WxUiBackend::open_files(const std::vector<std::string>& paths) {
-    return run_on_gui(m_gui_timeout_ms, [&]() -> int {
-        Plater* plater = wxGetApp().plater();
-        if (plater == nullptr)
-            throw AutomationError(kErrLoadFailed, "no plater to load into");
-        // Default strategy matches drag-drop / Plater::load_files's own default: it
-        // routes .3mf as a project and meshes as models based on file content, so no
-        // as_project flag is needed in v1. ask_multi=false: never prompt.
-        const LoadStrategy strategy = LoadStrategy::LoadModel | LoadStrategy::LoadConfig;
-        std::vector<size_t> loaded;
-        try {
-            loaded = plater->load_files(paths, strategy, /*ask_multi=*/false);
-        } catch (const std::exception& e) {
-            throw AutomationError(kErrLoadFailed,
-                                  std::string("load_files failed: ") + e.what());
-        }
-        if (loaded.empty())
-            throw AutomationError(kErrLoadFailed, "load_files loaded nothing");
-        return static_cast<int>(loaded.size());
-    });
-}
-```
-
-Notes for the implementer:
-- `LoadStrategy` and its `operator|` (namespace `Slic3r`, from `libslic3r/Format/bbs_3mf.hpp`) are already in scope: `WxUiBackend.cpp` includes `Plater.hpp` (line 7), which transitively pulls in the enum, and this translation unit lives in `Slic3r::GUI::Automation` so unqualified `LoadStrategy` resolves via the enclosing `Slic3r` namespace. No new include is required.
-- `Plater::load_files(const std::vector<std::string>&, LoadStrategy, bool)` is the existing string overload (`Plater.hpp:379`) — no `boost::filesystem::path` conversion needed.
-- `kErrLoadFailed` comes from `JsonRpcDispatcher.hpp`, already included at line 4.
-- An `AutomationError` thrown inside the `run_on_gui` lambda is captured by the helper's `set_exception` and rethrown from `fut.get()`, so the 1007 code propagates to the dispatcher unchanged.
-
-- [ ] **Step 3: Build the full app to verify it compiles and links**
-
-Run: `cmake --build build --config RelWithDebInfo --target OrcaSlicer`
-Expected: build succeeds (no missing-symbol / pure-virtual errors; `WxUiBackend` is now concrete).
-
-- [ ] **Step 4: Commit**
-
-```bash
-git add src/slic3r/GUI/Automation/WxUiBackend.hpp src/slic3r/GUI/Automation/WxUiBackend.cpp
-git commit -m "feat(automation): implement WxUiBackend::open_files via Plater::load_files"
-```
-
----
-
-## Task 5: Python client wrapper `OrcaClient.open`
-
-**Files:**
-- Modify: `tools/automation/orca_automation.py:80-82`
-
-- [ ] **Step 1: Add the `open` method**
-
-In `tools/automation/orca_automation.py`, after the `key` method (ends line 82), add:
-
-```python
-    def key(self, keys) -> dict:
-        # keys: "ctrl+s" or ["ctrl", "s"]
-        return self._call("input.key", {"keys": keys})
-
-    def open(self, paths) -> dict:
-        """Load one or more files into the running instance at runtime.
-
-        `paths` is a single absolute path string or a list of them. Paths are read
-        from the host filesystem by the server (localhost-only). Returns
-        {"ok": True, "loaded": <count>}. Raises OrcaError 1007 on load failure."""
-        if isinstance(paths, str):
-            paths = [paths]
-        return self._call("file.open", {"paths": list(paths)})
-```
-
-- [ ] **Step 2: Smoke-test the wrapper's normalization offline (no server needed)**
-
-Run:
-```bash
-python -c "import sys; sys.path.insert(0, 'tools/automation'); import orca_automation as m; c = m.OrcaClient.__new__(m.OrcaClient); c._call = lambda meth, params=None: (meth, params); print(c.open('C:/a.stl')); print(c.open(['C:/a.stl','C:/b.stl']))"
-```
-Expected output:
-```
-('file.open', {'paths': ['C:/a.stl']})
-('file.open', {'paths': ['C:/a.stl', 'C:/b.stl']})
-```
-
-- [ ] **Step 3: Commit**
-
-```bash
-git add tools/automation/orca_automation.py
-git commit -m "feat(automation): add OrcaClient.open() wrapper for file.open"
-```
-
----
-
-## Task 6: Update `example_slice.py` to load at runtime via `file.open`
-
-**Files:**
-- Modify: `tools/automation/example_slice.py:26-52`
-
-- [ ] **Step 1: Launch without the model arg, then call `open`**
-
-In `tools/automation/example_slice.py`, change the `subprocess.Popen` call (lines 26-31) to drop the trailing model positional:
-
-```python
-    proc = subprocess.Popen([
-        args.orca,
-        "--automation-server",
-        f"--automation-server-port={args.port}",
-    ])
-```
-
-Then replace the project-load wait block (currently lines 46-51) so the model is loaded at runtime via `file.open` instead of relying on a launch-time positional:
-
-```python
-        # Load the model into the already-running instance, then wait until the
-        # project reports loaded. file.open is synchronous, so project_loaded is
-        # already true on return; the wait is a belt-and-suspenders guard.
-        orca.open([args.model])
-        deadline = time.time() + 30
-        while time.time() < deadline:
-            if orca.app_state().get("project_loaded"):
-                break
-            time.sleep(0.5)
-```
-
-- [ ] **Step 2: Byte-compile the script to confirm no syntax errors**
-
-Run: `python -m py_compile tools/automation/example_slice.py`
-Expected: no output, exit code 0.
-
-- [ ] **Step 3: Commit**
-
-```bash
-git add tools/automation/example_slice.py
-git commit -m "docs(automation): example_slice.py loads model at runtime via file.open"
-```
-
----
-
-## Task 7: Document `file.open` in `doc/automation.md`
-
-**Files:**
-- Modify: `doc/automation.md` (capabilities example §4 line 111-114; new method subsection after `screenshot.window`; error table §7)
-
-- [ ] **Step 1: Add `file.open` to the capabilities example**
-
-In `doc/automation.md`, update the `automation.version` result example (lines 111-114) to include `file.open`:
-
-```json
-  "capabilities": [
-    "tree.dump", "tree.find", "widget.get", "input.click", "input.type",
-    "input.key", "sync.wait_for", "app.state", "screenshot.window", "file.open"
-  ]
-```
-
-The §4 prose count is already written for this: "There are 11 methods … the 10 callable feature methods" now matches exactly (10 capability entries + `automation.version` = 11). Leave that sentence unchanged.
-
-- [ ] **Step 2: Add the `file.open` method subsection**
-
-In `doc/automation.md`, immediately after the `screenshot.window` method subsection (it ends just before the `---` on line 303) and before that `---`, insert:
-
-```markdown
-### `file.open`
-
-Load one or more files into the **already-running** instance at runtime, by calling
-`Plater::load_files(...)` directly on the GUI thread. This is the supported way to add
-or swap a model without relaunching the process. Loading is **synchronous**: when the
-call returns `ok: true`, `app.state().project_loaded` is already `true` (no polling
-race).
-
-**Params:**
-
-| Param | Type | Required | Meaning |
-|---|---|---|---|
-| `paths` | string or array of strings | yes | One or more **absolute** file paths. A bare string is accepted and treated as a one-element list. Paths are read from the **host (server) filesystem** — client and server are localhost-only. |
-
-`.3mf` files are routed as projects and meshes as models automatically, based on file
-content (the same default strategy as drag-drop); there is no `as_project` flag in v1.
-
-**Result:** `{ "ok": true, "loaded": <int> }`, where `loaded` is the number of objects
-added to the scene (`load_files(...).size()`).
-
-**Errors:**
-
-- `-32602` (invalid params) — `paths` is missing, is not a string/array, contains a
-  non-string entry, or yields no non-empty path.
-- `1007` (load failed) — `load_files` returned empty or threw (file not found, parse
-  error, or unsupported format).
-- `1004` (GUI busy) — the GUI-thread marshal timed out. An extremely large model can
-  exceed the marshal timeout and surface here; documented, not mitigated in v1.
-```
-
-- [ ] **Step 3: Add the `1007` row to the error-code table**
-
-In `doc/automation.md` §7, in the application-specific codes table, after the `1006` row (line 395) add:
-
-```markdown
-| `1006` | Disabled. |
-| `1007` | Load failed — `file.open`'s `load_files` returned empty or threw (not found, parse error, unsupported format). |
-```
-
-- [ ] **Step 4: Commit**
-
-```bash
-git add doc/automation.md
-git commit -m "docs(automation): document file.open method and error 1007"
-```
-
----
-
-## Final verification
-
-- [ ] **Step 1: Full automation unit suite green**
-
-Run: `cmake --build build --config RelWithDebInfo --target automation_tests && build/tests/automation/RelWithDebInfo/automation_tests.exe --order rand --warn NoAssertions`
-Expected: PASS — all cases (pre-existing ~32 + 7 new) green, no `NoAssertions` warnings on the new cases.
-
-- [ ] **Step 2: Full app builds**
-
-Run: `cmake --build build --config RelWithDebInfo --target ALL_BUILD -- -m`
-Expected: build succeeds.
-
-- [ ] **Step 3: Manual runtime check (requires a display)**
-
-Launch with `--automation-server` and **no** model arg, then from a Python shell:
-```python
-from orca_automation import OrcaClient
-orca = OrcaClient(port=13619)
-print(orca.open(["C:/abs/path/cube.stl"]))   # -> {'ok': True, 'loaded': 1}
-print(orca.app_state()["project_loaded"])    # -> True
-open("window.png","wb").write(orca.screenshot())  # PNG shows the loaded model
-```
-Expected: `loaded >= 1`, `project_loaded == True`, screenshot shows the model.
-
-- [ ] **Step 4: Gating check (automation OFF is a no-op)**
-
-Confirm by reading: with no `--automation-server` flag, the server/backend/dispatcher are never constructed (`GUI_App.cpp` `start_automation_server()` early-return), so `file.open` is unreachable. No new hot-path cost beyond the existing single bool check. (See `doc/automation.md` §Verification — disabled-path audit; this feature adds no new gating surface.)
-
----
-
-## Backward compatibility
-
-Additive only: one new method (`file.open`), one new error code (`1007`), one new capabilities entry, and one new backend interface method. No existing method, profile, project-file handling, or default behavior changes. The method is reachable only when `--automation-server` is passed.

docs/superpowers/specs/2026-06-03-orcaslicer-file-open-method-design.md

@@ -1,117 +0,0 @@
-# Design — `file.open` automation method (runtime model loading)
-
-**Date:** 2026-06-03
-**Branch:** `feature/automation`
-**Status:** Approved for implementation
-
----
-
-## Problem
-
-Today a model can be loaded into OrcaSlicer **only at process launch**: the model path
-is passed as a CLI positional arg and OrcaSlicer's normal startup file-loading ingests
-it. The JSON-RPC automation protocol has **no** load method, so swapping or adding a
-model in an already-running instance requires a fresh process launch.
-
-Driving the native File→Import dialog via `input.click` is not a viable substitute: the
-OS file picker is not a `wxWindow`, so it never appears in the `tree.dump` hierarchy
-(`WxUiBackend::dump_tree` walks `wxGetApp().mainframe` children only), and `input.click`
-can only target nodes resolved from that tree (no raw-coordinate click). Blind typing via
-`input.type` is mechanically possible but unobservable: the native picker is not a
-`wxDialog`, so `app.state().modal_dialog` and `sync.wait_for` cannot gate on it, leaving
-only sleep-and-hope timing. A direct API method is the clean fix.
-
-## Goal
-
-Add a `file.open` JSON-RPC method that loads one or more files into a running instance by
-calling `Plater::load_files(...)` directly on the GUI thread. Out of scope: any
-dialog-driving mechanism (intercept hook or true OS-level drive) — explicitly deferred.
-
----
-
-## Protocol
-
-- **Method:** `file.open`
-- **Params:** `{ "paths": ["C:/abs/a.stl", ...] }`
-  - A bare string is also accepted: `{ "paths": "C:/abs/a.stl" }`.
-  - Paths must be **absolute**. The server reads them from the host filesystem
-    (client/server are localhost-only).
-- **Result:** `{ "ok": true, "loaded": <count> }`
-  - `count` is `load_files(...).size()` — the number of objects added to the scene.
-- **Errors:**
-  | Code | Constant | Condition |
-  |------|----------|-----------|
-  | -32602 | `kInvalidParams` | `paths` missing/empty, a non-string entry, or no non-empty path |
-  | 1004 | `kErrGuiBusy` | GUI-thread marshal timed out (`m_gui_timeout_ms`) |
-  | 1007 | `kErrLoadFailed` | `load_files` returned empty / threw (not found, parse error, unsupported format) — **new code** |
-
-## Semantics — synchronous
-
-`Plater::load_files` runs and completes on the GUI thread. The backend marshals via the
-existing `run_on_gui(m_gui_timeout_ms, …)` helper and returns only after the load
-finishes. Consequently, when `file.open` returns `ok:true`, `app.state().project_loaded`
-is already `true` — there is no polling race.
-
-Rejected alternative — async "fire-and-poll-`project_loaded`": adds client complexity and
-loses a definitive per-call error result, with no benefit since loading is synchronous.
-
-**Caveat:** an extremely large model could exceed `m_gui_timeout_ms` and surface as
-`1004 kErrGuiBusy`. Documented; not mitigated in v1.
-
-## Load strategy (v1 minimal)
-
-Pass the default `LoadStrategy::LoadModel | LoadStrategy::LoadConfig` (identical to
-drag-drop / `Plater::load_files`'s default) with `ask_multi = false`. This already routes
-`.3mf` files as projects and meshes as models based on file content, so **no `as_project`
-flag is needed in v1**. A future `{ "as_project": bool }` flag remains possible but is not
-implemented now.
-
----
-
-## Components / files to touch
-
-Follows the existing `screenshot_window` / `app_state` method pattern.
-
-1. **`src/slic3r/GUI/Automation/IUiBackend.hpp`** — add pure-virtual
-   `int open_files(const std::vector<std::string>& paths)` returning the loaded count,
-   throwing `AutomationError` on failure. Header stays wx-free (no `LoadStrategy` leak).
-2. **`src/slic3r/GUI/Automation/WxUiBackend.{hpp,cpp}`** — implement `open_files`:
-   `run_on_gui(m_gui_timeout_ms, …)` → `wxGetApp().plater()->load_files(paths, default_strategy, false)`;
-   throw `kErrLoadFailed` if the returned vector is empty.
-3. **`src/slic3r/GUI/Automation/JsonRpcDispatcher.{hpp,cpp}`** —
-   - add `constexpr int kErrLoadFailed = 1007;`
-   - declare + define `m_file_open(params)` (param parsing/validation; accept string or
-     array; require ≥1 non-empty string path)
-   - add dispatch route `if (method == "file.open") return make_result(id, m_file_open(params));`
-   - add `"file.open"` to the capabilities array in `m_version`.
-4. **`tests/automation/MockUiBackend.hpp`** — `open_files` override recording the paths
-   vector + a configurable return-count (and a throw/fail knob).
-5. **`tests/automation/test_dispatcher.cpp`** — Catch2 v2 tests:
-   - array of paths → routes to backend, returns `loaded` count
-   - bare-string path → normalized to one path
-   - missing/empty `paths` → `-32602` (`kInvalidParams`)
-   - backend load failure → `1007`
-   - `automation.version` capabilities array includes `"file.open"`
-6. **`tools/automation/orca_automation.py`** — `open(self, paths)` wrapper (normalize
-   `str` → `[str]`, send `file.open`).
-7. **`tools/automation/example_slice.py`** — launch **without** a model arg, then
-   `orca.open([model])`, then wait for `project_loaded`.
-8. **`doc/automation.md`** — document method (params/result/errors), add to the
-   capabilities list, method index, and error table (`1007`).
-
----
-
-## Testing / verification
-
-- **Build (Windows):** `cmake --build . --config RelWithDebInfo --target ALL_BUILD -- -m`.
-- **Unit:** `automation` Catch2 suite green including new tests (≈31 → ≈34 cases).
-- **Manual:** launch with `--automation-server` and **no** model arg → call `file.open`
-  → confirm `app.state().project_loaded` flips `true` and `screenshot.window` shows the
-  model.
-- **Gating:** unchanged — the server only runs under `--automation-server`, so the method
-  is a no-op (unreachable) when automation is disabled.
-
-## Backward compatibility
-
-Additive only: a new method, a new error code, and a new capabilities entry. No change to
-existing methods, profiles, project-file handling, or default behavior.

docs/superpowers/specs/2026-06-03-orcaslicer-ui-automation-design.md

@@ -1,314 +0,0 @@
-# OrcaSlicer UI Automation — Design Spec
-
-**Date:** 2026-06-03
-**Status:** Approved design, pending implementation plan
-**Topic:** Add an opt-in, externally-controllable UI automation interface to OrcaSlicer for automated GUI testing and future AI-agent control.
-
----
-
-## 1. Overview
-
-Add a localhost JSON-RPC server to a running OrcaSlicer GUI instance that lets an
-**external** script (or AI agent) drive and observe the real GUI. "Driving" is done
-the way a user would — simulated mouse/keyboard via `wxUIActionSimulator` — while
-"observing" reads the live widget state and captures screenshots.
-
-The interface must cover **three UI technologies** present in OrcaSlicer:
-
-1. Native **wxWidgets** widgets (`wxWindow` hierarchy).
-2. The **OpenGL 3D viewport** (`GLCanvas3D`) — screenshots via the existing
-   framebuffer/thumbnail path.
-3. **Dear ImGui** immediate-mode controls (gizmo panels, in-canvas overlays,
-   notifications) — recorded as they are drawn, because there is no persistent tree.
-
-## 2. Goals / Non-Goals
-
-### Goals
-- Let an external, language-agnostic client connect to a running instance and:
-  introspect the UI, locate widgets by stable name, perform input actions, wait on
-  conditions, and capture screenshots (including the 3D view as a separate image).
-- Be safe by default: disabled unless explicitly enabled; bound to `127.0.0.1` only.
-- Be testable in CI without a display (pure-logic units behind a mock backend).
-- Ship a reference Python client, a runnable end-to-end example, protocol docs, and
-  C++ unit tests.
-
-### Non-Goals (v1)
-- No headless/offscreen automation — OS input injection needs a focused, visible
-  window (Linux CI requires a display, e.g. Xvfb).
-- No auth token in v1 (documented future hardening; localhost-only is the boundary).
-- No per-item coverage of raw-`ImGui::` gizmos (Emboss/SVG/Text). They get
-  window-level coverage; per-item is future work.
-- No new scripting language embedded in the app; control is purely external over JSON-RPC.
-- We do **not** modify the existing auth `HttpServer`.
-
-## 3. Background — existing infrastructure (verified)
-
-- **`wxUIActionSimulator`** is compiled into the wx build and already used
-  (`src/slic3r/GUI/GUI_ObjectList.cpp:211`). Cross-platform simulated input is available.
-- **`GLCanvas3D::render_thumbnail()`** (`src/slic3r/GUI/GLCanvas3D.cpp:2210+`) →
-  `render_thumbnail_framebuffer()` (`:6352`) renders the 3D scene into a
-  `ThumbnailData` (RGBA) via an FBO + `glReadPixels`. `debug_output_thumbnail()`
-  (`:6099`) shows the `ThumbnailData → wxImage → PNG` conversion. This is the
-  separate-3D-screenshot path. `Plater::generate_thumbnail()`/`generate_thumbnails()`
-  wrap it.
-- **`ImGuiWrapper`** (`src/slic3r/GUI/ImGuiWrapper.hpp`) is the chokepoint for nearly
-  all ImGui controls: `button`/`bbl_button`, `checkbox`/`bbl_checkbox`, `combo`,
-  `slider_float`, `input_double`, `radio_button`, `menu_item_with_icon`, plus
-  `begin`/`end` for windows. `imgui_internal.h` is in-tree, exposing
-  `ImGui::GetCurrentContext()->Windows`, item rects, and hovered/active id.
-- **`HttpServer`** (`src/slic3r/GUI/HttpServer.{hpp,cpp}`, boost::beast, port 13618)
-  is used for cloud auth. **It cannot serve a POST body** — `session::read_body()`
-  reads and discards the body and never replies (`HttpServer.cpp:57-65`). It is
-  effectively GET-only. We will **not** reuse or modify it.
-- **`OtherInstanceMessageHandler`** (`src/slic3r/GUI/InstanceCheck.{hpp,cpp}`) is the
-  template for "start a localhost listener once the MainFrame exists, post events into
-  the GUI." Useful as a structural reference.
-- **CLI args** are parsed in `src/OrcaSlicer.cpp` (`CLI::setup`/`CLI::run`) and flow
-  into the GUI run params consumed by `GUI_App::OnInit()`.
-
-## 4. Architecture
-
-```
-External script / AI agent  ──►  Python client (orca_automation.py)
-        │  HTTP POST /jsonrpc   (JSON-RPC 2.0)   on 127.0.0.1:<port>
-        ▼
-AutomationServer            (dedicated boost::beast listener; own thread;
-        │                    started only when --automation-server is set)
-        │  parse JSON-RPC envelope
-        ▼
-JsonRpcDispatcher           (pure logic — method registry; unit-testable)
-        │  marshal each call to the GUI thread via wxGetApp().CallAfter
-        │  + std::promise/future with a per-request timeout
-        ▼
-IUiBackend (interface)  ──►  WxUiBackend (real, GUI thread)   /   MockBackend (tests)
-        ├─ Introspection : walk wxWindow tree + read ImGui item table → unified JSON
-        ├─ Locator       : resolve automation-id / predicate → wx widget or ImGui item
-        ├─ Actions       : raise window, then wxUIActionSimulator click/type/key
-        ├─ Sync          : wait_for (poll condition) + app.state snapshot
-        └─ Screenshots   : wx widget → wxDC→PNG ;  3D view → render_thumbnail()→PNG
-```
-
-### Components (new files unless noted)
-
-All new code lives under `src/slic3r/GUI/Automation/`.
-
-| Component | Responsibility |
-|---|---|
-| `AutomationServer.{hpp,cpp}` | Dedicated boost::beast HTTP listener with **POST + body** support; one `POST /jsonrpc` endpoint; returns `application/json`. Localhost-only. Own thread. |
-| `JsonRpcDispatcher.{hpp,cpp}` | Parse JSON-RPC 2.0; route `method` → handler; build result/error. Depends only on `IUiBackend`. No wx/ImGui includes → unit-testable. |
-| `IUiBackend.hpp` | Abstract interface: `dump_tree`, `find`, `get_widget`, `click`, `type`, `key`, `wait_for`, `app_state`, `screenshot_window`, `screenshot_viewport3d`. Uses plain structs (no wx types) so tests can mock it. |
-| `WxUiBackend.{hpp,cpp}` | Real implementation. Runs on GUI thread. Walks `wxWindow` tree, reads the ImGui item table, drives `wxUIActionSimulator`, captures screenshots. |
-| `MockUiBackend.{hpp,cpp}` (tests) | Deterministic fake tree + recorded actions for unit tests. |
-| `AutomationRegistry.{hpp,cpp}` | Process-wide `wxWindow* → automation_id` map + reverse lookup; `set_automation_id(win, "id")` helper. Header is dependency-light so widget-construction code can call the helper unconditionally (it is a cheap no-op-safe registration). |
-| `WidgetSerializer.{hpp,cpp}` | `wxWindow` → JSON node (name/id, class, label, screen-rect, enabled, shown, value via RTTI). |
-| `ImGuiItemTable.{hpp,cpp}` | Per-frame recorder of ImGui items + live-window enumeration. Populated from `ImGuiWrapper`; read on GUI thread. |
-
-### Touch points in existing files
-- `src/slic3r/GUI/ImGuiWrapper.cpp` — add recording hooks inside the wrapped widget
-  methods and `begin`/`end`, **guarded by an `is_automation_enabled()` flag** so there
-  is zero overhead and zero behavior change when automation is off.
-- `src/slic3r/GUI/GUI_App.{hpp,cpp}` — own the `AutomationServer`; start it in
-  `OnInit()` only when the flag is set; stop it on exit. Expose
-  `is_automation_enabled()`.
-- `src/OrcaSlicer.cpp` — parse `--automation-server[=PORT]`; pass through GUI run params.
-- A handful of widget-construction sites (Slice/Export buttons, preset combos, main
-  tabs, common dialog OK/Cancel, the 3D canvas) — add `set_automation_id(...)` calls
-  (~15-20 widgets in v1).
-- CMake: add the new `Automation/` sources to the GUI target; add the unit-test target.
-
-## 5. Transport & Protocol
-
-- **Transport:** HTTP/1.1 on `127.0.0.1:<port>` (default **13619**, adjacent to the
-  auth server's 13618). Single endpoint: `POST /jsonrpc`, body is a JSON-RPC 2.0
-  request, response is a JSON-RPC 2.0 result/error. `GET /` returns a tiny health/version page.
-- **Protocol:** JSON-RPC 2.0. `id`, `method`, `params`. Batch not required in v1.
-
-### v1 methods
-
-| Method | Params | Result |
-|---|---|---|
-| `automation.version` | — | `{version, protocol, capabilities[]}` |
-| `tree.dump` | `{root?, max_depth?, visible_only?, include_imgui?}` | tree of nodes (wx + imgui) |
-| `tree.find` | `{name?, class?, label?, value?, backend?}` | `[node...]` matches |
-| `widget.get` | `{target}` | single node detail |
-| `input.click` | `{target, button?=left, double?=false, modifiers?[]}` | `{ok}` |
-| `input.type` | `{target?, text}` | `{ok}` |
-| `input.key` | `{keys}` e.g. `"ctrl+s"` or `["ctrl","s"]` | `{ok}` |
-| `sync.wait_for` | `{target, state: exists\|visible\|enabled\|value, value?, timeout_ms?=5000, poll_ms?=100}` | `{ok, elapsed_ms}` |
-| `app.state` | — | `{active_tab, project_loaded, slicing, slice_progress, modal_dialog?, foreground}` |
-| `screenshot.window` | `{target?}` (default main frame) | `{png_base64, width, height}` |
-| `screenshot.viewport3d` | `{plate?, width?, height?}` | `{png_base64, width, height}` |
-
-### Node shape (unified for wx and ImGui)
-```json
-{
-  "backend": "wx" | "imgui",
-  "id": "btn_slice",                 // automation id if set, else derived path id
-  "path": "MainFrame/.../btn_slice", // stable-ish positional path
-  "class": "Button",                 // wx class name or imgui item type
-  "label": "Slice plate",
-  "rect": { "x": 100, "y": 200, "w": 120, "h": 32 },  // screen coords
-  "enabled": true,
-  "visible": true,
-  "value": "PLA",                    // when applicable (text/choice/check/slider)
-  "children": [ ... ]                // wx only; imgui items are flat under their window
-}
-```
-
-### Error model (JSON-RPC `error.code`)
-- `-32700` parse error, `-32601` method not found, `-32602` invalid params (standard).
-- Application codes: `1001` widget/target not found, `1002` target not actionable
-  (disabled/hidden), `1003` wait timeout, `1004` GUI thread busy/timeout,
-  `1005` screenshot failed, `1006` automation feature disabled.
-
-## 6. Threading model
-
-- `AutomationServer` runs on its own thread and accepts connections; the dispatcher
-  parses on that thread.
-- **Every** call touching wx/ImGui/GL is marshaled to the GUI thread with
-  `wxGetApp().CallAfter([...]{ ... })`; the server thread blocks on a `std::future`
-  with a per-request timeout (default 5 s; `wait_for` uses its own larger budget).
-  Timeout → error `1004`.
-- This is mandatory: wx widgets, the ImGui context, and the GL context are not
-  thread-safe and are owned by the GUI thread.
-- `CallAfter` is serviced even while modal dialogs run (nested event loop), so
-  automation can interact with dialogs.
-
-## 7. Widget locator & automation IDs (wxWidgets)
-
-- **Stable IDs:** `set_automation_id(window, "btn_slice")` registers the widget in
-  `AutomationRegistry`. Stored in a side map keyed by `wxWindow*` (not via `SetName`,
-  to avoid any coupling with wx's name-based lookups). Registration is removed on
-  widget destruction (bind to `wxEVT_DESTROY` or prune lazily on lookup).
-- **Derived IDs:** for un-instrumented widgets, `WidgetSerializer` derives a positional
-  `path` (e.g. `MainFrame/Panel[2]/Button[0]`) so an AI agent can still target anything.
-  Named IDs are the preferred, stable path.
-- **Locator resolution order:** exact automation id → exact path → predicate match
-  (name/class/label/value). Ambiguous matches return the list via `tree.find`; action
-  methods require a unique match or error `1001`.
-- **v1 instrumented widgets (~15-20):** Slice/Export buttons, printer & filament preset
-  combos, the main tab buttons (`tp3DEditor`/`tpPreview`/`tpMonitor`/…), Add/Import,
-  common dialog OK/Cancel/Yes/No, the `GLCanvas3D` itself.
-
-## 8. ImGui coverage (v1 = wrapper items + window introspection)
-
-- **Item recording:** inside each `ImGuiWrapper` wrapped method, when
-  `is_automation_enabled()` is true, append the just-drawn item to a per-frame
-  `ImGuiItemTable` entry: `{window_name, label/id, type, rect, enabled, value}`.
-  Item rect comes from `ImGui::GetItemRectMin/Max()` (ImGui display coords) mapped to
-  **screen** coords via the `GLCanvas3D` client origin (`ClientToScreen`) and DPI scale.
-- **Window enumeration:** via `imgui_internal.h`, enumerate `GetCurrentContext()->Windows`
-  for window name, rect, visibility, plus the global hovered/active item id.
-- **Double-buffering:** the table is swapped at frame end (`ImGuiWrapper::render`) so
-  readers see a complete frame. Reads happen on the GUI thread (after marshaling), same
-  thread as rendering, so a simple front/back swap suffices.
-- **Freshness:** because items exist only while drawn, before an ImGui tree read or
-  action the backend forces a canvas refresh and flushes events so the latest frame is
-  captured. `sync.wait_for` can poll for an ImGui item to appear (e.g. after opening a
-  gizmo).
-- **Actions:** an ImGui target resolves to its recorded screen rect; `input.click`/
-  `input.type` use `wxUIActionSimulator` on that rect — identical action path to wx,
-  different rect source. Typing into an ImGui input works because simulated keystrokes
-  flow through the existing `ImGuiWrapper::update_key_data` bridge once the field is
-  focused by a click.
-- **Limitation (documented):** raw-`ImGui::` gizmos (Emboss, SVG, Text) are covered at
-  the **window** level only in v1; per-item instrumentation is future work.
-
-## 9. Screenshots
-
-- **`screenshot.window`:** capture a `wxWindow` (default: main frame) via
-  `wxClientDC`/`wxWindowDC` → `wxBitmap` → `wxImage` → PNG → base64. Works for native
-  widgets but **not** for the GL canvas region (returns black there) — hence the
-  separate 3D method.
-- **`screenshot.viewport3d`:** reuse `GLCanvas3D::render_thumbnail()` (FBO +
-  `glReadPixels`) → `ThumbnailData` → `wxImage` (per `debug_output_thumbnail`) → PNG →
-  base64. Optional `plate`, `width`, `height` params. Runs on the GUI thread with the GL
-  context current.
-
-## 10. Activation & security
-
-- **Off by default.** Enabled by CLI flag `--automation-server[=PORT]` (default port
-  13619). (An app-config/Preferences toggle may be added later; v1 is flag-only.)
-- **Bind `127.0.0.1` only.** No external interface.
-- **No token in v1** (per decision); documented as a recommended future hardening,
-  along with an optional `--automation-token`.
-- When disabled: no listener, no thread, and all `ImGuiWrapper` recording hooks are
-  skipped — **zero** runtime overhead and **zero** behavior change. This satisfies the
-  project's "features gated by options must not affect existing behavior when disabled"
-  constraint.
-
-## 11. Testability
-
-- `JsonRpcDispatcher` depends only on `IUiBackend` and has **no** wx/ImGui/GL includes.
-- **C++ unit tests (Catch2), display-free, run in CI:**
-  - JSON-RPC envelope parse/validate/dispatch (good + malformed input, error codes).
-  - Method routing and param validation for every v1 method against `MockUiBackend`.
-  - `WidgetSerializer` node shape (fed a synthetic node model, not real wx widgets).
-  - Locator resolution: exact id, path, predicate, ambiguity, not-found.
-- The only piece needing a real GUI is `WxUiBackend`; it is exercised by the manual
-  end-to-end example, not by CI unit tests.
-
-## 12. Deliverables
-
-- **C++:** the `Automation/` components, `ImGuiWrapper` recording hooks, widget
-  instrumentation, CLI flag plumbing, `GUI_App` lifecycle, CMake wiring.
-- **`tools/automation/orca_automation.py`:** reference Python client wrapping the
-  JSON-RPC calls (`connect`, `version`, `dump_tree`, `find`, `click`, `type`, `key`,
-  `wait_for`, `app_state`, `screenshot`, `screenshot_3d`).
-- **`tools/automation/example_slice.py`:** runnable end-to-end flow — launch OrcaSlicer
-  with the flag, load a model, click Slice, `wait_for` completion, save a 3D-preview PNG.
-  Doubles as a manual smoke test.
-- **`doc/automation.md`:** protocol reference (methods, params, results, error codes),
-  node shape, automation-id naming conventions, ImGui notes, platform/display caveats.
-- **`tests/`:** Catch2 unit-test target for the dispatch/serialize/locator logic.
-
-## 13. New / changed file inventory
-
-**New**
-- `src/slic3r/GUI/Automation/AutomationServer.{hpp,cpp}`
-- `src/slic3r/GUI/Automation/JsonRpcDispatcher.{hpp,cpp}`
-- `src/slic3r/GUI/Automation/IUiBackend.hpp`
-- `src/slic3r/GUI/Automation/WxUiBackend.{hpp,cpp}`
-- `src/slic3r/GUI/Automation/AutomationRegistry.{hpp,cpp}`
-- `src/slic3r/GUI/Automation/WidgetSerializer.{hpp,cpp}`
-- `src/slic3r/GUI/Automation/ImGuiItemTable.{hpp,cpp}`
-- `tools/automation/orca_automation.py`
-- `tools/automation/example_slice.py`
-- `doc/automation.md`
-- `tests/automation/` (Catch2 target) + `MockUiBackend.{hpp,cpp}`
-
-**Changed**
-- `src/slic3r/GUI/ImGuiWrapper.cpp` (guarded recording hooks)
-- `src/slic3r/GUI/GUI_App.{hpp,cpp}` (server lifecycle, `is_automation_enabled()`)
-- `src/OrcaSlicer.cpp` (CLI flag)
-- ~15-20 widget-construction sites (`set_automation_id`)
-- `src/slic3r/GUI/CMakeLists.txt` + `tests/CMakeLists.txt`
-
-## 14. Known constraints & limitations
-
-- OS input injection requires the OrcaSlicer window **focused and visible**; the backend
-  raises/focuses the main window before injecting. Linux CI needs a display (Xvfb).
-- Input is asynchronous at the OS level; correctness relies on `sync.wait_for` rather
-  than fixed sleeps.
-- ImGui items are only addressable while their host panel is drawn.
-- Raw-`ImGui::` gizmos: window-level only in v1.
-- Single-client assumption in v1 (serialized request handling); no concurrent sessions
-  contract.
-
-## 15. Future work (out of scope for v1)
-
-- Optional auth token + Preferences toggle.
-- WebSocket channel for server-push events (slice progress, dialog-appeared).
-- Per-item instrumentation for raw-`ImGui::` gizmos.
-- An MCP server wrapping the JSON-RPC client for direct AI-agent integration.
-- Optional integration of Dear ImGui Test Engine for deterministic ImGui interaction.
-
-## 16. Verification plan
-
-- **CI:** Catch2 unit tests (dispatch/serialize/locator) pass with no display.
-- **Manual / e2e:** run `tools/automation/example_slice.py` against a built OrcaSlicer
-  launched with `--automation-server`; confirm model loads, Slice runs, `wait_for`
-  returns on completion, and both a wx-window PNG and a 3D-viewport PNG are produced.
-- **Regression:** build and run with automation **off**; confirm no new threads, no
-  listener, and ImGui rendering is byte-for-byte unchanged (hooks compiled out of the
-  hot path via the disabled flag).

localization/i18n/OrcaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-08 00:18+0800\n"
+"POT-Creation-Date: 2026-05-22 02:24+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -1771,17 +1771,6 @@ msgstr ""
 msgid "User logged out"
 msgstr ""
 
-msgid ""
-"You are currently in Stealth Mode. To log into the Cloud, you need to "
-"disable Stealth Mode first."
-msgstr ""
-
-msgid "Stealth Mode"
-msgstr ""
-
-msgid "Quit Stealth Mode"
-msgstr ""
-
 msgid "new or open project file is not allowed during the slicing process!"
 msgstr ""
 
@@ -1793,24 +1782,21 @@ msgid ""
 "version before it can be used normally."
 msgstr ""
 
+#, possible-c-format, possible-boost-format
 msgid ""
-"Cloud sync conflict: this preset has a newer version in OrcaCloud.\n"
-"Pull downloads the cloud copy. Force push overwrites it with your local "
-"preset."
+"Failed to connect to OrcaCloud.\n"
+"Please check your network connectivity\n"
+"(HTTP %u): %s"
 msgstr ""
 
+#, possible-c-format, possible-boost-format
 msgid ""
-"Cloud sync conflict: a preset with this name already exists in OrcaCloud.\n"
-"Pull downloads the cloud copy. Force push overwrites it with your local "
-"preset."
+"Failed to connect to OrcaCloud.\n"
+"Please check your network connectivity\n"
+"(HTTP %u)"
 msgstr ""
 
-msgid ""
-"Force push will overwrite the cloud copy with your local preset changes.\n"
-"Do you want to continue?"
-msgstr ""
-
-msgid "Resolve cloud sync conflict"
+msgid "Cloud Error"
 msgstr ""
 
 msgid "Retrieving printer information, please try again later."
@@ -1853,7 +1839,7 @@ msgid "Privacy Policy Update"
 msgstr ""
 
 #, possible-c-format, possible-boost-format
-msgid "your Orca Cloud profile (user ID: \"%s\")"
+msgid "your Bambu Cloud profile (user ID: \"%s\")"
 msgstr ""
 
 msgid "your default profile"
@@ -2099,9 +2085,6 @@ msgstr ""
 msgid "Orca Cube"
 msgstr ""
 
-msgid "OrcaSliced Combo"
-msgstr ""
-
 msgid "Orca Tolerance Test"
 msgstr ""
 
@@ -5144,9 +5127,6 @@ msgstr ""
 msgid "Outline"
 msgstr ""
 
-msgid "Realistic View"
-msgstr ""
-
 msgid "Perspective"
 msgstr ""
 
@@ -5189,7 +5169,7 @@ msgstr ""
 msgid "Size:"
 msgstr ""
 
-#, possible-c-format, possible-boost-format
+#, possible-boost-format
 msgid ""
 "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please "
 "separate the conflicted objects farther (%s <-> %s)."
@@ -5427,18 +5407,15 @@ msgstr ""
 msgid "Show Configuration Folder"
 msgstr ""
 
-msgid "Troubleshoot Center"
-msgstr ""
-
-msgid "Open Network Test"
-msgstr ""
-
 msgid "Show Tip of the Day"
 msgstr ""
 
 msgid "Check for Updates"
 msgstr ""
 
+msgid "Open Network Test"
+msgstr ""
+
 #, possible-c-format, possible-boost-format
 msgid "&About %s"
 msgstr ""
@@ -6706,12 +6683,6 @@ msgstr ""
 msgid "Model file downloaded."
 msgstr ""
 
-msgid "Pull"
-msgstr ""
-
-msgid "Force push"
-msgstr ""
-
 msgid "Shared profiles may be available for this printer."
 msgstr ""
 
@@ -7633,12 +7604,6 @@ msgid ""
 "will be exported."
 msgstr ""
 
-msgid "Flashforge host is not available."
-msgstr ""
-
-msgid "Unable to log in to the Flashforge printer."
-msgstr ""
-
 msgid "Is the printer ready? Is the print sheet in place, empty and clean?"
 msgstr ""
 
@@ -8140,24 +8105,6 @@ msgstr ""
 msgid "Graphics"
 msgstr ""
 
-msgid "Phong shading"
-msgstr ""
-
-msgid "Uses Phong shading inside realistic view."
-msgstr ""
-
-msgid "SSAO ambient occlusion"
-msgstr ""
-
-msgid "Applies SSAO in realistic view."
-msgstr ""
-
-msgid "Shadows"
-msgstr ""
-
-msgid "Renders cast shadows on the plate in realistic view."
-msgstr ""
-
 msgid "Anti-aliasing"
 msgstr ""
 
@@ -8215,16 +8162,9 @@ msgid "Stealth mode"
 msgstr ""
 
 msgid ""
-"This disables all cloud features, including Orca Cloud profile syncing. "
-"Users who prefer to work entirely offline can enable this option.\n"
-"Note: When Stealth Mode is enabled, your user profiles will not be backed up "
-"to Orca Cloud."
-msgstr ""
-
-msgid "Hide login side panel"
-msgstr ""
-
-msgid "Hide the login side panel on the home page."
+"This disables all cloud services e.g. Orca Cloud and Bambu Cloud. This stops "
+"the transmission of data to Bambu's cloud services too. Users who don't use "
+"BBL machines or use LAN mode only can safely turn on this function."
 msgstr ""
 
 msgid "Network test"
@@ -8364,14 +8304,6 @@ msgid ""
 "Highly experimental! Slow and may create artifact."
 msgstr ""
 
-msgid "Show unsupported presets"
-msgstr ""
-
-msgid ""
-"Show incompatible/unsupported presets in the printer and filament dropdown "
-"lists. These presets cannot be selected."
-msgstr ""
-
 msgid "Allow Abnormal Storage"
 msgstr ""
 
@@ -9329,8 +9261,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 
 msgid ""
@@ -9408,9 +9340,6 @@ msgstr ""
 msgid "Precision"
 msgstr ""
 
-msgid "Z contouring"
-msgstr ""
-
 msgid "Wall generator"
 msgstr ""
 
@@ -9771,10 +9700,9 @@ msgid "Retraction when switching material"
 msgstr ""
 
 msgid ""
-"The Retract before wipe option could be only 100% when using the Firmware "
-"Retraction mode.\n"
+"The Wipe option is not available when using the Firmware Retraction mode.\n"
 "\n"
-"Shall I set it to 100% in order to enable Firmware Retraction?"
+"Shall I disable it in order to enable Firmware Retraction?"
 msgstr ""
 
 msgid "Firmware Retraction"
@@ -11259,19 +11187,6 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter."
 msgstr ""
 
-msgid "Bridge line width must not exceed nozzle diameter"
-msgstr ""
-
-msgid ""
-"\"G92 E0\" was found in before_layer_change_gcode, but the G or E are not "
-"uppercase. Please change them to the exact uppercase \"G92 E0\"."
-msgstr ""
-
-msgid ""
-"\"G92 E0\" was found in layer_change_gcode, but the G or E are not "
-"uppercase. Please change them to the exact uppercase \"G92 E0\"."
-msgstr ""
-
 msgid ""
 "Relative extruder addressing requires resetting the extruder position at "
 "each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
@@ -11279,13 +11194,13 @@ msgid ""
 msgstr ""
 
 msgid ""
-"\"G92 E0\" was found in before_layer_change_gcode, which is incompatible "
-"with absolute extruder addressing."
+"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
+"absolute extruder addressing."
 msgstr ""
 
 msgid ""
-"\"G92 E0\" was found in layer_change_gcode, which is incompatible with "
-"absolute extruder addressing."
+"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
+"extruder addressing."
 msgstr ""
 
 #, possible-c-format, possible-boost-format
@@ -11363,31 +11278,6 @@ msgstr ""
 msgid "Extruder printable area"
 msgstr ""
 
-msgid "Support parallel printheads"
-msgstr ""
-
-msgid ""
-"Enable printer settings for machines that can use multiple printheads in "
-"parallel."
-msgstr ""
-
-msgid "Parallel printheads count"
-msgstr ""
-
-msgid ""
-"Set the number of parallel printheads for machines like OrangeStorm Giga "
-"printer."
-msgstr ""
-
-msgid "Parallel printheads bed exclude areas"
-msgstr ""
-
-msgid ""
-"Ordered list of bed exclude areas by parallel printhead count. Item 1 "
-"applies to one printhead, item 2 to two printheads, and so on. Leave an item "
-"empty for no excluded area."
-msgstr ""
-
 msgid "Bed exclude area"
 msgstr ""
 
@@ -11497,12 +11387,6 @@ msgid ""
 "contain the API Key or the password required for authentication."
 msgstr ""
 
-msgid "Serial Number"
-msgstr ""
-
-msgid "Flashforge local API requires the printer serial number."
-msgstr ""
-
 msgid "Name of the printer."
 msgstr ""
 
@@ -11758,42 +11642,21 @@ msgstr ""
 
 #, no-c-format, no-boost-format
 msgid ""
-"External Bridging angle override.\n"
-"If left to zero, the bridging angle will be calculated automatically for "
-"each specific bridge.\n"
-"Otherwise the provided angle will be used according to:\n"
-" - The absolute coordinates\n"
-" - The absolute coordinates + Model rotation: If Align infill direction to "
-"model is enabled\n"
-" - The optimal automatic angle + this value: If 'Relative Bridge Angle' is "
-"enabled\n"
-"\n"
-"Use 180° for zero absolute angle."
+"Bridging angle override. If left to zero, the bridging angle will be "
+"calculated automatically. Otherwise the provided angle will be used for "
+"external bridges. Use 180° for zero angle."
 msgstr ""
 
 msgid "Internal bridge infill direction"
 msgstr ""
 
 msgid ""
-"Internal Bridging angle override.\n"
-"If left to zero, the bridging angle will be calculated automatically for "
-"each specific bridge.\n"
-"Otherwise the provided angle will be used according to:\n"
-" - The absolute coordinates\n"
-" - The absolute coordinates + Model rotation: If Align infill direction to "
-"model is enabled\n"
-" - The optimal automatic angle + this value: If 'Relative Bridge Angle' is "
-"enabled\n"
+"Internal bridging angle override. If left to zero, the bridging angle will "
+"be calculated automatically. Otherwise the provided angle will be used for "
+"internal bridges. Use 180° for zero angle.\n"
 "\n"
-"Use 180° for zero absolute angle."
-msgstr ""
-
-msgid "Relative bridge angle"
-msgstr ""
-
-msgid ""
-"When enabled, the bridge angle values are added to the automatically "
-"calculated bridge direction instead of overriding it."
+"It is recommended to leave it at 0 unless there is a specific model need not "
+"to."
 msgstr ""
 
 msgid "External bridge density"
@@ -11801,90 +11664,54 @@ msgstr ""
 
 msgid ""
 "Controls the density (spacing) of external bridge lines. Default is 100%.\n"
-"Theoretically, 100% means a solid bridge, but due to the tendency of bridge "
-"extrusions to sag, 100% may not be sufficient.\n"
 "\n"
-"- Higher than 100% density (Recommended Max 125%):\n"
-"  - Pros: Produces smoother bridge surfaces, as overlapping lines provide "
-"additional support during printing.\n"
-"  - Cons: Can cause overextrusion, which may reduce lower and upper surface "
-"quality and increase the risk of warping.\n"
+"Lower density external bridges can help improve reliability as there is more "
+"space for air to circulate around the extruded bridge, improving its cooling "
+"speed. Minimum is 10%.\n"
 "\n"
-"- Lower than 100% density (Min 10%):\n"
-"  - Pros: Can create a string-like first layer. Faster and with better "
-"cooling because there is more space for air to circulate around the extruded "
-"bridge.\n"
-"  - Cons: May lead to sagging and poorer surface finish.\n"
-"\n"
-"Recommended range: Minimum 10% - Maximum 125%."
+"Higher densities can produce smoother bridge surfaces, as overlapping lines "
+"provide additional support during printing. Maximum is 120%.\n"
+"Note: Bridge density that is too high can cause warping or overextrusion."
 msgstr ""
 
 msgid "Internal bridge density"
 msgstr ""
 
 msgid ""
-"Controls the density (spacing) of internal bridge lines. Default is 100%. "
-"100% means a solid internal bridge.\n"
+"Controls the density (spacing) of internal bridge lines. 100% means solid "
+"bridge. Default is 100%.\n"
 "\n"
-"Internal bridges act as intermediate support between sparse infill and top "
-"solid infill and can strongly affect top surface quality.\n"
-"\n"
-"- Higher than 100% density (Recommended Max 125%):\n"
-"  - Pros: Improves internal bridge strength and support under top layers, "
-"reducing sagging and improving top-surface finish.\n"
-"  - Cons: Increases material use and print time; excessive density may cause "
-"overextrusion and internal stresses.\n"
-"\n"
-"- Lower than 100% density (Min 10%):\n"
-"  - Pros: Can reduce pillowing and improve cooling (more airflow through the "
-"bridge), and may speed up printing.\n"
-"  - Cons: May reduce internal support, increasing the risk of sagging and "
-"top surface defects.\n"
+"Lower density internal bridges can help reduce top surface pillowing and "
+"improve internal bridge reliability as there is more space for air to "
+"circulate around the extruded bridge, improving its cooling speed.\n"
 "\n"
 "This option works particularly well when combined with the second internal "
-"bridge over infill option to improve bridging further before solid infill is "
-"extruded."
+"bridge over infill option, further improving internal bridging structure "
+"before solid infill is extruded."
 msgstr ""
 
 msgid "Bridge flow ratio"
 msgstr ""
 
 msgid ""
-"This value governs the thickness of the external (visible) bridge layer.\n"
-"Values above 1.0: Increase the amount of material while maintaining line "
-"spacing. This can improve line contact and strength.\n"
-"Values below 1.0: Reduce the amount of material while adjusting line spacing "
-"to maintain contact. This can improve sagging.\n"
+"Decrease this value slightly (for example 0.9) to reduce the amount of "
+"material for bridge, to improve sag.\n"
 "\n"
 "The actual bridge flow used is calculated by multiplying this value with the "
 "filament flow ratio, and if set, the object's flow ratio."
 msgstr ""
 
-#, possible-c-format, possible-boost-format
-msgid ""
-"Bridge line width is expressed either as an absolute value or as a "
-"percentage of the active nozzle diameter (percentages are computed from the "
-"nozzle diameter).\n"
-"Recommended to use with a higher Bridge density or Bridge flow ratio.\n"
-"\n"
-"The maximum value is 100% or the nozzle diameter.\n"
-"If set to 0, the line width will match the Internal solid infill width."
-msgstr ""
-
 msgid "Internal bridge flow ratio"
 msgstr ""
 
 msgid ""
 "This value governs the thickness of the internal bridge layer. This is the "
-"first layer over sparse infill so increasing it may increase strength and "
-"upper layer quality.\n"
-"Values above 1.0: Increase the amount of material while maintaining line "
-"spacing. This can improve line contact and strength.\n"
-"Values below 1.0: Reduce the amount of material while adjusting line spacing "
-"to maintain contact. This can improve sagging.\n"
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill.\n"
 "\n"
-"The actual bridge flow used is calculated by multiplying this value with the "
-"filament flow ratio, and if set, the object's flow ratio."
+"The actual internal bridge flow used is calculated by multiplying this value "
+"with the bridge flow ratio, the filament flow ratio, and if set, the "
+"object's flow ratio."
 msgstr ""
 
 msgid "Top surface flow ratio"
@@ -12130,34 +11957,22 @@ msgstr ""
 #, no-c-format, no-boost-format
 msgid ""
 "Enable this option to slow down printing in areas where perimeters may have "
-"curled upwards.\n"
-"For example, additional slowdown will be applied when printing overhangs on "
-"sharp corners like the front of the Benchy hull, reducing curling which "
-"compounds over multiple layers.\n"
+"curled upwards. For example, additional slowdown will be applied when "
+"printing overhangs on sharp corners like the front of the Benchy hull, "
+"reducing curling which compounds over multiple layers.\n"
 "\n"
 "It is generally recommended to have this option switched on unless your "
-"printer cooling is powerful enough or the print speed is slow enough that "
-"perimeter curling does not happen. \n"
-"If printing with a high external perimeter speed, this parameter may "
-"introduce wall artifacts when slowing down, due to the potentially large "
-"variance in print speeds causing the extruder to be unable to keep up with "
-"the requested flow change.\n"
-"Root cause of these artifacts is most likely PA tuning being slightly off, "
-"especially when combined with a high PA smooth time.\n"
-"\n"
-"Recommendations when enabling this option:\n"
-"1. Reduce Pressure Advance smooth time to 0.015 - 0.02 so the extruder "
-"reacts quickly to the speed changes.\n"
-"2. Increase the minimum print speeds to limit the magnitude of the slowdown "
-"and reduce the variance between fast and slow segments.\n"
-"3. If artifacts still appear, enable Extrusion Rate Smoothing (ERS) to "
-"further smooth the flow transitions.\n"
+"printer cooling is powerful enough or the print speed slow enough that "
+"perimeter curling does not happen. If printing with a high external "
+"perimeter speed, this parameter may introduce slight artifacts when slowing "
+"down due to the large variance in print speeds. If you notice artifacts, "
+"ensure your pressure advance is tuned correctly.\n"
 "\n"
 "Note: When this option is enabled, overhang perimeters are treated like "
 "overhangs, meaning the overhang speed is applied even if the overhanging "
-"perimeter is part of a bridge.\n"
-"For example, when the perimeters are 100% overhanging, with no wall "
-"supporting them from underneath, the 100% overhang speed will be applied."
+"perimeter is part of a bridge. For example, when the perimeters are 100% "
+"overhanging, with no wall supporting them from underneath, the 100% overhang "
+"speed will be applied."
 msgstr ""
 
 msgid "mm/s or %"
@@ -12377,24 +12192,18 @@ msgid "Thick external bridges"
 msgstr ""
 
 msgid ""
-"If enabled, bridge extrusion uses a line height equal to the nozzle "
-"diameter.\n"
-"This increases bridge strength and reliability, allowing longer spans, but "
-"may worsen appearance.\n"
-"If disabled, bridges may look better but are generally reliable only for "
-"shorter spans."
+"If enabled, bridges are more reliable, can bridge longer distances, but may "
+"look worse. If disabled, bridges look better but are reliable just for "
+"shorter bridged distances."
 msgstr ""
 
 msgid "Thick internal bridges"
 msgstr ""
 
 msgid ""
-"If enabled, internal bridge extrusion uses a line height equal to the nozzle "
-"diameter.\n"
-"This increases internal bridge strength and reliability when printed over "
-"sparse infill, but may worsen appearance.\n"
-"If disabled, internal bridges may look better but can be less reliable over "
-"sparse infill."
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
 msgstr ""
 
 msgid "Extra bridge layers (beta)"
@@ -13322,10 +13131,9 @@ msgid "Align infill direction to model"
 msgstr ""
 
 msgid ""
-"Aligns infill, bridge, ironing and surface fill directions to follow the "
-"model's orientation on the build plate.\n"
-"When enabled, directions rotate with the model to maintain optimal strength "
-"characteristics."
+"Aligns infill and surface fill directions to follow the model's orientation "
+"on the build plate. When enabled, fill directions rotate with the model to "
+"maintain optimal strength characteristics."
 msgstr ""
 
 msgid "Insert solid layers"
@@ -13348,7 +13156,6 @@ msgstr ""
 msgid "Z-buckling bias optimization (experimental)"
 msgstr ""
 
-#, possible-c-format, possible-boost-format
 msgid ""
 "Tightens the gyroid wave along the Z (vertical) axis at low infill density "
 "to shorten the effective vertical column length and improve Z-axis "
@@ -13443,27 +13250,6 @@ msgid ""
 "The angle of the infill angled lines. 60° will result in a pure honeycomb."
 msgstr ""
 
-msgid "Lightning overhang angle"
-msgstr ""
-
-msgid "Maximum overhang angle for Lightning infill support propagation."
-msgstr ""
-
-msgid "Prune angle"
-msgstr ""
-
-msgid ""
-"Controls how aggressively short or unsupported Lightning branches are "
-"pruned.\n"
-"This angle is converted internally to a per-layer distance."
-msgstr ""
-
-msgid "Straightening angle"
-msgstr ""
-
-msgid "Maximum straightening angle used to simplify Lightning branches."
-msgstr ""
-
 msgid "Sparse infill anchor length"
 msgstr ""
 
@@ -13528,8 +13314,8 @@ msgid "mm/s² or %"
 msgstr ""
 
 msgid ""
-"Acceleration of sparse infill. If the value is expressed as a percentage (e."
-"g. 100%), it will be calculated based on the default acceleration."
+"Acceleration of sparse infill. If the value is expressed as a percentage "
+"(e.g. 100%), it will be calculated based on the default acceleration."
 msgstr ""
 
 msgid ""
@@ -13647,10 +13433,10 @@ msgstr ""
 
 msgid ""
 "Fan speed will be ramped up linearly from zero at layer "
-"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
-"\". \"full_fan_speed_layer\" will be ignored if lower than "
-"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
-"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+"\"close_fan_the_first_x_layers\" to maximum at layer "
+"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
+"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
+"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
 msgstr ""
 
 msgid "layer"
@@ -14275,9 +14061,7 @@ msgstr ""
 msgid "Probing exclude area of clumping."
 msgstr ""
 
-msgid ""
-"Filament to print internal sparse infill.\n"
-"\"Default\" uses the active object/part filament."
+msgid "Filament to print internal sparse infill."
 msgstr ""
 
 msgid ""
@@ -14977,20 +14761,7 @@ msgid ""
 "speed to print. For 100%% overhang, bridge speed is used."
 msgstr ""
 
-msgid "Outer walls"
-msgstr ""
-
-msgid ""
-"Filament to print outer walls.\n"
-"\"Default\" uses the active object/part filament."
-msgstr ""
-
-msgid "Inner walls"
-msgstr ""
-
-msgid ""
-"Filament to print inner walls.\n"
-"\"Default\" uses the active object/part filament."
+msgid "Filament to print walls."
 msgstr ""
 
 msgid ""
@@ -15406,8 +15177,8 @@ msgid "Role base wipe speed"
 msgstr ""
 
 msgid ""
-"The wipe speed is determined by the speed of the current extrusion role. e."
-"g. if a wipe action is executed immediately following an outer wall "
+"The wipe speed is determined by the speed of the current extrusion role. "
+"e.g. if a wipe action is executed immediately following an outer wall "
 "extrusion, the speed of the outer wall extrusion will be utilized for the "
 "wipe action."
 msgstr ""
@@ -15542,19 +15313,10 @@ msgid ""
 "internal solid infill."
 msgstr ""
 
-msgid ""
-"Filament to print internal solid infill.\n"
-"\"Default\" uses the active object/part filament."
+msgid "Solid infill"
 msgstr ""
 
-msgid ""
-"Filament to print top surface.\n"
-"\"Default\" uses the active object/part filament."
-msgstr ""
-
-msgid ""
-"Filament to print bottom surface.\n"
-"\"Default\" uses the active object/part filament."
+msgid "Filament to print solid infill."
 msgstr ""
 
 msgid ""
@@ -15860,9 +15622,8 @@ msgid "Support/raft base"
 msgstr ""
 
 msgid ""
-"Filament to print support base and raft.\n"
-"\"Default\" means no specific filament for support and current filament is "
-"used."
+"Filament to print support base and raft. \"Default\" means no specific "
+"filament for support and current filament is used."
 msgstr ""
 
 msgid "Avoid interface filament for base"
@@ -15888,9 +15649,8 @@ msgid "Support/raft interface"
 msgstr ""
 
 msgid ""
-"Filament to print support interface.\n"
-"\"Default\" means no specific filament for support interface and current "
-"filament is used."
+"Filament to print support interface. \"Default\" means no specific filament "
+"for support interface and current filament is used."
 msgstr ""
 
 msgid "Top interface layers"
@@ -16153,8 +15913,8 @@ msgstr ""
 
 msgid ""
 "Enable this option for automated chamber temperature control. This option "
-"activates the emitting of an M191 command before the \"machine_start_gcode"
-"\"\n"
+"activates the emitting of an M191 command before the "
+"\"machine_start_gcode\"\n"
 " which sets the chamber temperature and waits until it is reached. In "
 "addition, it emits an M141 command at the end of the print to turn off the "
 "chamber heater, if present.\n"
@@ -16699,9 +16459,6 @@ msgstr ""
 msgid "Invalid value when spiral vase mode is enabled: "
 msgstr ""
 
-msgid "Bridge line width must not exceed nozzle diameter: "
-msgstr ""
-
 msgid "too large line width "
 msgstr ""
 
@@ -16940,14 +16697,8 @@ msgid "Debug level"
 msgstr ""
 
 msgid ""
-"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
-"trace\n"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Redirects debug logging to file.\n"
+"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
+"5:trace\n"
 msgstr ""
 
 msgid "Enable timelapse for print"
@@ -17358,6 +17109,9 @@ msgstr ""
 msgid "Generating infill toolpath"
 msgstr ""
 
+msgid "Z contouring"
+msgstr ""
+
 msgid "Detect overhangs for auto-lift"
 msgstr ""
 
@@ -18244,15 +17998,6 @@ msgstr ""
 msgid "Top Surface Pattern"
 msgstr ""
 
-msgid "Choose a slot for the selected color"
-msgstr ""
-
-msgid "Material in the material station"
-msgstr ""
-
-msgid "Only materials of the same type can be selected."
-msgstr ""
-
 msgid "Send G-code to printer host"
 msgstr ""
 
@@ -18275,48 +18020,6 @@ msgstr ""
 msgid "Upload"
 msgstr ""
 
-msgid "Leveling before print"
-msgstr ""
-
-msgid "Time-lapse"
-msgstr ""
-
-msgid "Enable IFS"
-msgstr ""
-
-#, possible-c-format, possible-boost-format
-msgid "Detected %d IFS slots on printer."
-msgstr ""
-
-msgid "This printer does not report a material station."
-msgstr ""
-
-msgid "Unable to read IFS slots from printer."
-msgstr ""
-
-msgid "Loading IFS slots from printer..."
-msgstr ""
-
-msgid "Slice the plate first to get project material information."
-msgstr ""
-
-msgid ""
-"This plate uses multiple materials. Enable IFS and assign each tool to a "
-"printer slot."
-msgstr ""
-
-msgid "Each project material must be assigned to an IFS slot before printing."
-msgstr ""
-
-msgid ""
-"Each project material must be assigned to a loaded IFS slot before printing."
-msgstr ""
-
-msgid ""
-"Each project material must match the material loaded in the selected IFS "
-"slot."
-msgstr ""
-
 msgid "Print host upload queue"
 msgstr ""
 
@@ -18359,6 +18062,9 @@ msgid ""
 "starting the print."
 msgstr ""
 
+msgid "Time-lapse"
+msgstr ""
+
 msgid "Heated Bed Leveling"
 msgstr ""
 
@@ -18368,16 +18074,6 @@ msgstr ""
 msgid "Smooth Build Plate (Side B)"
 msgstr ""
 
-#, possible-c-format, possible-boost-format
-msgid "Printer: %s"
-msgstr ""
-
-msgid "Calibrate before printing"
-msgstr ""
-
-msgid "Filament Mapping:"
-msgstr ""
-
 msgid "Unable to perform boolean operation on selected parts"
 msgstr ""
 
@@ -18548,8 +18244,8 @@ msgid ""
 msgstr ""
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\".\n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\".\n"
 "To add preset for more printers, please go to printer selection"
 msgstr ""
 
@@ -18980,18 +18676,9 @@ msgid ""
 "agents are registered at startup."
 msgstr ""
 
-msgid "Select a Flashforge printer"
-msgstr ""
-
-msgid "Discovered Printers"
-msgstr ""
-
 msgid "Could not get a valid Printer Host reference"
 msgstr ""
 
-msgid "Valid session not detected. Proceed with login to 3DPrinterOS?"
-msgstr ""
-
 msgid "Success!"
 msgstr ""
 
@@ -19032,30 +18719,6 @@ msgstr ""
 msgid "Connection to printers connected via the print host failed."
 msgstr ""
 
-msgid "3DPrinterOS Cloud upload options"
-msgstr ""
-
-msgid "Single file"
-msgstr ""
-
-msgid "Project File"
-msgstr ""
-
-msgid "Project:"
-msgstr ""
-
-msgid "Printer type:"
-msgstr ""
-
-msgid "Printer type not found, please select manually."
-msgstr ""
-
-msgid "Authorizing..."
-msgstr ""
-
-msgid "Error session check"
-msgstr ""
-
 #, possible-c-format, possible-boost-format
 msgid "Mismatched type of print host: %s"
 msgstr ""
@@ -19672,27 +19335,12 @@ msgstr ""
 msgid "SimplyPrint account not linked. Go to Connect options to set it up."
 msgstr ""
 
-msgid "Flashforge returned an invalid JSON response."
-msgstr ""
-
-msgid "No Flashforge printers were discovered on the local network."
-msgstr ""
-
-msgid "Connected to Flashforge local API successfully."
-msgstr ""
-
 msgid "Serial connection to Flashforge is working correctly."
 msgstr ""
 
-msgid "Could not connect to Flashforge local API"
-msgstr ""
-
 msgid "Could not connect to Flashforge via serial"
 msgstr ""
 
-msgid "Flashforge local API requires both serial number and access code."
-msgstr ""
-
 msgid "The provided state is not correct."
 msgstr ""
 

localization/i18n/en/OrcaSlicer_en.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-08 00:18+0800\n"
+"POT-Creation-Date: 2026-05-22 02:24+0800\n"
 "PO-Revision-Date: 2025-05-18 09:32-0300\n"
 "Last-Translator: Alexandre Folle de Menezes\n"
 "Language-Team: \n"
@@ -1771,17 +1771,6 @@ msgstr ""
 msgid "User logged out"
 msgstr ""
 
-msgid ""
-"You are currently in Stealth Mode. To log into the Cloud, you need to "
-"disable Stealth Mode first."
-msgstr ""
-
-msgid "Stealth Mode"
-msgstr ""
-
-msgid "Quit Stealth Mode"
-msgstr ""
-
 msgid "new or open project file is not allowed during the slicing process!"
 msgstr ""
 
@@ -1793,24 +1782,21 @@ msgid ""
 "version before it can be used normally."
 msgstr ""
 
+#, c-format, boost-format
 msgid ""
-"Cloud sync conflict: this preset has a newer version in OrcaCloud.\n"
-"Pull downloads the cloud copy. Force push overwrites it with your local "
-"preset."
+"Failed to connect to OrcaCloud.\n"
+"Please check your network connectivity\n"
+"(HTTP %u): %s"
 msgstr ""
 
+#, c-format, boost-format
 msgid ""
-"Cloud sync conflict: a preset with this name already exists in OrcaCloud.\n"
-"Pull downloads the cloud copy. Force push overwrites it with your local "
-"preset."
+"Failed to connect to OrcaCloud.\n"
+"Please check your network connectivity\n"
+"(HTTP %u)"
 msgstr ""
 
-msgid ""
-"Force push will overwrite the cloud copy with your local preset changes.\n"
-"Do you want to continue?"
-msgstr ""
-
-msgid "Resolve cloud sync conflict"
+msgid "Cloud Error"
 msgstr ""
 
 msgid "Retrieving printer information, please try again later."
@@ -1853,7 +1839,7 @@ msgid "Privacy Policy Update"
 msgstr ""
 
 #, c-format, boost-format
-msgid "your Orca Cloud profile (user ID: \"%s\")"
+msgid "your Bambu Cloud profile (user ID: \"%s\")"
 msgstr ""
 
 msgid "your default profile"
@@ -2099,9 +2085,6 @@ msgstr ""
 msgid "Orca Cube"
 msgstr ""
 
-msgid "OrcaSliced Combo"
-msgstr ""
-
 msgid "Orca Tolerance Test"
 msgstr ""
 
@@ -5201,9 +5184,6 @@ msgstr ""
 msgid "Outline"
 msgstr ""
 
-msgid "Realistic View"
-msgstr ""
-
 msgid "Perspective"
 msgstr ""
 
@@ -5246,7 +5226,7 @@ msgstr ""
 msgid "Size:"
 msgstr ""
 
-#, c-format, boost-format
+#, boost-format
 msgid ""
 "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please "
 "separate the conflicted objects farther (%s <-> %s)."
@@ -5484,18 +5464,15 @@ msgstr ""
 msgid "Show Configuration Folder"
 msgstr ""
 
-msgid "Troubleshoot Center"
-msgstr ""
-
-msgid "Open Network Test"
-msgstr ""
-
 msgid "Show Tip of the Day"
 msgstr ""
 
 msgid "Check for Updates"
 msgstr ""
 
+msgid "Open Network Test"
+msgstr ""
+
 #, c-format, boost-format
 msgid "&About %s"
 msgstr ""
@@ -6767,12 +6744,6 @@ msgstr ""
 msgid "Model file downloaded."
 msgstr ""
 
-msgid "Pull"
-msgstr ""
-
-msgid "Force push"
-msgstr ""
-
 msgid "Shared profiles may be available for this printer."
 msgstr ""
 
@@ -7718,12 +7689,6 @@ msgid ""
 "will be exported."
 msgstr ""
 
-msgid "Flashforge host is not available."
-msgstr ""
-
-msgid "Unable to log in to the Flashforge printer."
-msgstr ""
-
 msgid "Is the printer ready? Is the print sheet in place, empty and clean?"
 msgstr ""
 
@@ -8232,24 +8197,6 @@ msgstr ""
 msgid "Graphics"
 msgstr ""
 
-msgid "Phong shading"
-msgstr ""
-
-msgid "Uses Phong shading inside realistic view."
-msgstr ""
-
-msgid "SSAO ambient occlusion"
-msgstr ""
-
-msgid "Applies SSAO in realistic view."
-msgstr ""
-
-msgid "Shadows"
-msgstr ""
-
-msgid "Renders cast shadows on the plate in realistic view."
-msgstr ""
-
 msgid "Anti-aliasing"
 msgstr ""
 
@@ -8307,16 +8254,9 @@ msgid "Stealth mode"
 msgstr ""
 
 msgid ""
-"This disables all cloud features, including Orca Cloud profile syncing. "
-"Users who prefer to work entirely offline can enable this option.\n"
-"Note: When Stealth Mode is enabled, your user profiles will not be backed up "
-"to Orca Cloud."
-msgstr ""
-
-msgid "Hide login side panel"
-msgstr ""
-
-msgid "Hide the login side panel on the home page."
+"This disables all cloud services e.g. Orca Cloud and Bambu Cloud. This stops "
+"the transmission of data to Bambu's cloud services too. Users who don't use "
+"BBL machines or use LAN mode only can safely turn on this function."
 msgstr ""
 
 msgid "Network test"
@@ -8462,14 +8402,6 @@ msgid ""
 "Highly experimental! Slow and may create artifact."
 msgstr ""
 
-msgid "Show unsupported presets"
-msgstr ""
-
-msgid ""
-"Show incompatible/unsupported presets in the printer and filament dropdown "
-"lists. These presets cannot be selected."
-msgstr ""
-
 msgid "Allow Abnormal Storage"
 msgstr ""
 
@@ -9440,8 +9372,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 
 msgid ""
@@ -9519,9 +9451,6 @@ msgstr ""
 msgid "Precision"
 msgstr ""
 
-msgid "Z contouring"
-msgstr ""
-
 msgid "Wall generator"
 msgstr ""
 
@@ -9907,11 +9836,13 @@ msgid "Retraction when switching material"
 msgstr ""
 
 msgid ""
-"The Retract before wipe option could be only 100% when using the Firmware "
-"Retraction mode.\n"
+"The Wipe option is not available when using the Firmware Retraction mode.\n"
 "\n"
-"Shall I set it to 100% in order to enable Firmware Retraction?"
+"Shall I disable it in order to enable Firmware Retraction?"
 msgstr ""
+"The Wipe option is not available when using the Firmware Retraction mode.\n"
+"\n"
+"Disable it in order to enable Firmware Retraction?"
 
 msgid "Firmware Retraction"
 msgstr ""
@@ -11415,19 +11346,6 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter."
 msgstr "Layer height cannot exceed nozzle diameter."
 
-msgid "Bridge line width must not exceed nozzle diameter"
-msgstr ""
-
-msgid ""
-"\"G92 E0\" was found in before_layer_change_gcode, but the G or E are not "
-"uppercase. Please change them to the exact uppercase \"G92 E0\"."
-msgstr ""
-
-msgid ""
-"\"G92 E0\" was found in layer_change_gcode, but the G or E are not "
-"uppercase. Please change them to the exact uppercase \"G92 E0\"."
-msgstr ""
-
 msgid ""
 "Relative extruder addressing requires resetting the extruder position at "
 "each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
@@ -11435,13 +11353,13 @@ msgid ""
 msgstr ""
 
 msgid ""
-"\"G92 E0\" was found in before_layer_change_gcode, which is incompatible "
-"with absolute extruder addressing."
+"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
+"absolute extruder addressing."
 msgstr ""
 
 msgid ""
-"\"G92 E0\" was found in layer_change_gcode, which is incompatible with "
-"absolute extruder addressing."
+"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
+"extruder addressing."
 msgstr ""
 
 #, c-format, boost-format
@@ -11519,31 +11437,6 @@ msgstr ""
 msgid "Extruder printable area"
 msgstr ""
 
-msgid "Support parallel printheads"
-msgstr ""
-
-msgid ""
-"Enable printer settings for machines that can use multiple printheads in "
-"parallel."
-msgstr ""
-
-msgid "Parallel printheads count"
-msgstr ""
-
-msgid ""
-"Set the number of parallel printheads for machines like OrangeStorm Giga "
-"printer."
-msgstr ""
-
-msgid "Parallel printheads bed exclude areas"
-msgstr ""
-
-msgid ""
-"Ordered list of bed exclude areas by parallel printhead count. Item 1 "
-"applies to one printhead, item 2 to two printheads, and so on. Leave an item "
-"empty for no excluded area."
-msgstr ""
-
 msgid "Bed exclude area"
 msgstr "Excluded bed area"
 
@@ -11659,12 +11552,6 @@ msgid ""
 "contain the API Key or the password required for authentication."
 msgstr ""
 
-msgid "Serial Number"
-msgstr ""
-
-msgid "Flashforge local API requires the printer serial number."
-msgstr ""
-
 msgid "Name of the printer."
 msgstr ""
 
@@ -11956,42 +11843,24 @@ msgstr ""
 
 #, no-c-format, no-boost-format
 msgid ""
-"External Bridging angle override.\n"
-"If left to zero, the bridging angle will be calculated automatically for "
-"each specific bridge.\n"
-"Otherwise the provided angle will be used according to:\n"
-" - The absolute coordinates\n"
-" - The absolute coordinates + Model rotation: If Align infill direction to "
-"model is enabled\n"
-" - The optimal automatic angle + this value: If 'Relative Bridge Angle' is "
-"enabled\n"
-"\n"
-"Use 180° for zero absolute angle."
+"Bridging angle override. If left to zero, the bridging angle will be "
+"calculated automatically. Otherwise the provided angle will be used for "
+"external bridges. Use 180° for zero angle."
 msgstr ""
+"Bridging angle override. 0 means the bridging angle will be calculated "
+"automatically. Otherwise the provided angle will be used for external "
+"bridges. Use 180° for zero angle."
 
 msgid "Internal bridge infill direction"
 msgstr ""
 
 msgid ""
-"Internal Bridging angle override.\n"
-"If left to zero, the bridging angle will be calculated automatically for "
-"each specific bridge.\n"
-"Otherwise the provided angle will be used according to:\n"
-" - The absolute coordinates\n"
-" - The absolute coordinates + Model rotation: If Align infill direction to "
-"model is enabled\n"
-" - The optimal automatic angle + this value: If 'Relative Bridge Angle' is "
-"enabled\n"
+"Internal bridging angle override. If left to zero, the bridging angle will "
+"be calculated automatically. Otherwise the provided angle will be used for "
+"internal bridges. Use 180° for zero angle.\n"
 "\n"
-"Use 180° for zero absolute angle."
-msgstr ""
-
-msgid "Relative bridge angle"
-msgstr ""
-
-msgid ""
-"When enabled, the bridge angle values are added to the automatically "
-"calculated bridge direction instead of overriding it."
+"It is recommended to leave it at 0 unless there is a specific model need not "
+"to."
 msgstr ""
 
 msgid "External bridge density"
@@ -11999,90 +11868,54 @@ msgstr ""
 
 msgid ""
 "Controls the density (spacing) of external bridge lines. Default is 100%.\n"
-"Theoretically, 100% means a solid bridge, but due to the tendency of bridge "
-"extrusions to sag, 100% may not be sufficient.\n"
 "\n"
-"- Higher than 100% density (Recommended Max 125%):\n"
-"  - Pros: Produces smoother bridge surfaces, as overlapping lines provide "
-"additional support during printing.\n"
-"  - Cons: Can cause overextrusion, which may reduce lower and upper surface "
-"quality and increase the risk of warping.\n"
+"Lower density external bridges can help improve reliability as there is more "
+"space for air to circulate around the extruded bridge, improving its cooling "
+"speed. Minimum is 10%.\n"
 "\n"
-"- Lower than 100% density (Min 10%):\n"
-"  - Pros: Can create a string-like first layer. Faster and with better "
-"cooling because there is more space for air to circulate around the extruded "
-"bridge.\n"
-"  - Cons: May lead to sagging and poorer surface finish.\n"
-"\n"
-"Recommended range: Minimum 10% - Maximum 125%."
+"Higher densities can produce smoother bridge surfaces, as overlapping lines "
+"provide additional support during printing. Maximum is 120%.\n"
+"Note: Bridge density that is too high can cause warping or overextrusion."
 msgstr ""
 
 msgid "Internal bridge density"
 msgstr ""
 
 msgid ""
-"Controls the density (spacing) of internal bridge lines. Default is 100%. "
-"100% means a solid internal bridge.\n"
+"Controls the density (spacing) of internal bridge lines. 100% means solid "
+"bridge. Default is 100%.\n"
 "\n"
-"Internal bridges act as intermediate support between sparse infill and top "
-"solid infill and can strongly affect top surface quality.\n"
-"\n"
-"- Higher than 100% density (Recommended Max 125%):\n"
-"  - Pros: Improves internal bridge strength and support under top layers, "
-"reducing sagging and improving top-surface finish.\n"
-"  - Cons: Increases material use and print time; excessive density may cause "
-"overextrusion and internal stresses.\n"
-"\n"
-"- Lower than 100% density (Min 10%):\n"
-"  - Pros: Can reduce pillowing and improve cooling (more airflow through the "
-"bridge), and may speed up printing.\n"
-"  - Cons: May reduce internal support, increasing the risk of sagging and "
-"top surface defects.\n"
+"Lower density internal bridges can help reduce top surface pillowing and "
+"improve internal bridge reliability as there is more space for air to "
+"circulate around the extruded bridge, improving its cooling speed.\n"
 "\n"
 "This option works particularly well when combined with the second internal "
-"bridge over infill option to improve bridging further before solid infill is "
-"extruded."
+"bridge over infill option, further improving internal bridging structure "
+"before solid infill is extruded."
 msgstr ""
 
 msgid "Bridge flow ratio"
 msgstr ""
 
 msgid ""
-"This value governs the thickness of the external (visible) bridge layer.\n"
-"Values above 1.0: Increase the amount of material while maintaining line "
-"spacing. This can improve line contact and strength.\n"
-"Values below 1.0: Reduce the amount of material while adjusting line spacing "
-"to maintain contact. This can improve sagging.\n"
+"Decrease this value slightly (for example 0.9) to reduce the amount of "
+"material for bridge, to improve sag.\n"
 "\n"
 "The actual bridge flow used is calculated by multiplying this value with the "
 "filament flow ratio, and if set, the object's flow ratio."
 msgstr ""
 
-#, c-format, boost-format
-msgid ""
-"Bridge line width is expressed either as an absolute value or as a "
-"percentage of the active nozzle diameter (percentages are computed from the "
-"nozzle diameter).\n"
-"Recommended to use with a higher Bridge density or Bridge flow ratio.\n"
-"\n"
-"The maximum value is 100% or the nozzle diameter.\n"
-"If set to 0, the line width will match the Internal solid infill width."
-msgstr ""
-
 msgid "Internal bridge flow ratio"
 msgstr ""
 
 msgid ""
 "This value governs the thickness of the internal bridge layer. This is the "
-"first layer over sparse infill so increasing it may increase strength and "
-"upper layer quality.\n"
-"Values above 1.0: Increase the amount of material while maintaining line "
-"spacing. This can improve line contact and strength.\n"
-"Values below 1.0: Reduce the amount of material while adjusting line spacing "
-"to maintain contact. This can improve sagging.\n"
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill.\n"
 "\n"
-"The actual bridge flow used is calculated by multiplying this value with the "
-"filament flow ratio, and if set, the object's flow ratio."
+"The actual internal bridge flow used is calculated by multiplying this value "
+"with the bridge flow ratio, the filament flow ratio, and if set, the "
+"object's flow ratio."
 msgstr ""
 
 msgid "Top surface flow ratio"
@@ -12330,34 +12163,22 @@ msgstr ""
 #, no-c-format, no-boost-format
 msgid ""
 "Enable this option to slow down printing in areas where perimeters may have "
-"curled upwards.\n"
-"For example, additional slowdown will be applied when printing overhangs on "
-"sharp corners like the front of the Benchy hull, reducing curling which "
-"compounds over multiple layers.\n"
+"curled upwards. For example, additional slowdown will be applied when "
+"printing overhangs on sharp corners like the front of the Benchy hull, "
+"reducing curling which compounds over multiple layers.\n"
 "\n"
 "It is generally recommended to have this option switched on unless your "
-"printer cooling is powerful enough or the print speed is slow enough that "
-"perimeter curling does not happen. \n"
-"If printing with a high external perimeter speed, this parameter may "
-"introduce wall artifacts when slowing down, due to the potentially large "
-"variance in print speeds causing the extruder to be unable to keep up with "
-"the requested flow change.\n"
-"Root cause of these artifacts is most likely PA tuning being slightly off, "
-"especially when combined with a high PA smooth time.\n"
-"\n"
-"Recommendations when enabling this option:\n"
-"1. Reduce Pressure Advance smooth time to 0.015 - 0.02 so the extruder "
-"reacts quickly to the speed changes.\n"
-"2. Increase the minimum print speeds to limit the magnitude of the slowdown "
-"and reduce the variance between fast and slow segments.\n"
-"3. If artifacts still appear, enable Extrusion Rate Smoothing (ERS) to "
-"further smooth the flow transitions.\n"
+"printer cooling is powerful enough or the print speed slow enough that "
+"perimeter curling does not happen. If printing with a high external "
+"perimeter speed, this parameter may introduce slight artifacts when slowing "
+"down due to the large variance in print speeds. If you notice artifacts, "
+"ensure your pressure advance is tuned correctly.\n"
 "\n"
 "Note: When this option is enabled, overhang perimeters are treated like "
 "overhangs, meaning the overhang speed is applied even if the overhanging "
-"perimeter is part of a bridge.\n"
-"For example, when the perimeters are 100% overhanging, with no wall "
-"supporting them from underneath, the 100% overhang speed will be applied."
+"perimeter is part of a bridge. For example, when the perimeters are 100% "
+"overhanging, with no wall supporting them from underneath, the 100% overhang "
+"speed will be applied."
 msgstr ""
 
 msgid "mm/s or %"
@@ -12603,24 +12424,21 @@ msgid "Thick external bridges"
 msgstr ""
 
 msgid ""
-"If enabled, bridge extrusion uses a line height equal to the nozzle "
-"diameter.\n"
-"This increases bridge strength and reliability, allowing longer spans, but "
-"may worsen appearance.\n"
-"If disabled, bridges may look better but are generally reliable only for "
-"shorter spans."
+"If enabled, bridges are more reliable, can bridge longer distances, but may "
+"look worse. If disabled, bridges look better but are reliable just for "
+"shorter bridged distances."
 msgstr ""
+"If enabled, bridges are more reliable and can bridge longer distances but "
+"may look worse. If disabled, bridges look better but are reliable only for "
+"shorter distances."
 
 msgid "Thick internal bridges"
 msgstr ""
 
 msgid ""
-"If enabled, internal bridge extrusion uses a line height equal to the nozzle "
-"diameter.\n"
-"This increases internal bridge strength and reliability when printed over "
-"sparse infill, but may worsen appearance.\n"
-"If disabled, internal bridges may look better but can be less reliable over "
-"sparse infill."
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
 msgstr ""
 
 msgid "Extra bridge layers (beta)"
@@ -13581,10 +13399,9 @@ msgid "Align infill direction to model"
 msgstr ""
 
 msgid ""
-"Aligns infill, bridge, ironing and surface fill directions to follow the "
-"model's orientation on the build plate.\n"
-"When enabled, directions rotate with the model to maintain optimal strength "
-"characteristics."
+"Aligns infill and surface fill directions to follow the model's orientation "
+"on the build plate. When enabled, fill directions rotate with the model to "
+"maintain optimal strength characteristics."
 msgstr ""
 
 msgid "Insert solid layers"
@@ -13607,7 +13424,6 @@ msgstr ""
 msgid "Z-buckling bias optimization (experimental)"
 msgstr ""
 
-#, c-format, boost-format
 msgid ""
 "Tightens the gyroid wave along the Z (vertical) axis at low infill density "
 "to shorten the effective vertical column length and improve Z-axis "
@@ -13702,27 +13518,6 @@ msgid ""
 "The angle of the infill angled lines. 60° will result in a pure honeycomb."
 msgstr ""
 
-msgid "Lightning overhang angle"
-msgstr ""
-
-msgid "Maximum overhang angle for Lightning infill support propagation."
-msgstr ""
-
-msgid "Prune angle"
-msgstr ""
-
-msgid ""
-"Controls how aggressively short or unsupported Lightning branches are "
-"pruned.\n"
-"This angle is converted internally to a per-layer distance."
-msgstr ""
-
-msgid "Straightening angle"
-msgstr ""
-
-msgid "Maximum straightening angle used to simplify Lightning branches."
-msgstr ""
-
 msgid "Sparse infill anchor length"
 msgstr ""
 
@@ -13789,8 +13584,8 @@ msgid "mm/s² or %"
 msgstr ""
 
 msgid ""
-"Acceleration of sparse infill. If the value is expressed as a percentage (e."
-"g. 100%), it will be calculated based on the default acceleration."
+"Acceleration of sparse infill. If the value is expressed as a percentage "
+"(e.g. 100%), it will be calculated based on the default acceleration."
 msgstr ""
 
 msgid ""
@@ -13915,10 +13710,10 @@ msgstr ""
 
 msgid ""
 "Fan speed will be ramped up linearly from zero at layer "
-"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
-"\". \"full_fan_speed_layer\" will be ignored if lower than "
-"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
-"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+"\"close_fan_the_first_x_layers\" to maximum at layer "
+"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
+"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
+"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
 msgstr ""
 
 msgid "layer"
@@ -14558,10 +14353,8 @@ msgstr ""
 msgid "Probing exclude area of clumping."
 msgstr ""
 
-msgid ""
-"Filament to print internal sparse infill.\n"
-"\"Default\" uses the active object/part filament."
-msgstr ""
+msgid "Filament to print internal sparse infill."
+msgstr "This is the filament for printing internal sparse infill."
 
 msgid ""
 "Line width of internal sparse infill. If expressed as a %, it will be "
@@ -15281,20 +15074,7 @@ msgstr ""
 "This detects the overhang percentage relative to line width and uses a "
 "different speed to print. For 100%% overhang, bridging speed is used."
 
-msgid "Outer walls"
-msgstr ""
-
-msgid ""
-"Filament to print outer walls.\n"
-"\"Default\" uses the active object/part filament."
-msgstr ""
-
-msgid "Inner walls"
-msgstr ""
-
-msgid ""
-"Filament to print inner walls.\n"
-"\"Default\" uses the active object/part filament."
+msgid "Filament to print walls."
 msgstr ""
 
 msgid ""
@@ -15721,8 +15501,8 @@ msgid "Role base wipe speed"
 msgstr ""
 
 msgid ""
-"The wipe speed is determined by the speed of the current extrusion role. e."
-"g. if a wipe action is executed immediately following an outer wall "
+"The wipe speed is determined by the speed of the current extrusion role. "
+"e.g. if a wipe action is executed immediately following an outer wall "
 "extrusion, the speed of the outer wall extrusion will be utilized for the "
 "wipe action."
 msgstr ""
@@ -15860,19 +15640,10 @@ msgstr ""
 "Sparse infill areas which are smaller than this threshold value are replaced "
 "by internal solid infill."
 
-msgid ""
-"Filament to print internal solid infill.\n"
-"\"Default\" uses the active object/part filament."
+msgid "Solid infill"
 msgstr ""
 
-msgid ""
-"Filament to print top surface.\n"
-"\"Default\" uses the active object/part filament."
-msgstr ""
-
-msgid ""
-"Filament to print bottom surface.\n"
-"\"Default\" uses the active object/part filament."
+msgid "Filament to print solid infill."
 msgstr ""
 
 msgid ""
@@ -16194,10 +15965,11 @@ msgid "Support/raft base"
 msgstr ""
 
 msgid ""
-"Filament to print support base and raft.\n"
-"\"Default\" means no specific filament for support and current filament is "
-"used."
+"Filament to print support base and raft. \"Default\" means no specific "
+"filament for support and current filament is used."
 msgstr ""
+"Filament to print support bases and rafts. \"Default\" means no specific "
+"filament for support, and current filament is used"
 
 msgid "Avoid interface filament for base"
 msgstr ""
@@ -16224,10 +15996,11 @@ msgid "Support/raft interface"
 msgstr ""
 
 msgid ""
-"Filament to print support interface.\n"
-"\"Default\" means no specific filament for support interface and current "
-"filament is used."
+"Filament to print support interface. \"Default\" means no specific filament "
+"for support interface and current filament is used."
 msgstr ""
+"Filament to print support interfaces. \"Default\" means no specific filament "
+"for support interface, and current filament is used"
 
 msgid "Top interface layers"
 msgstr ""
@@ -16498,8 +16271,8 @@ msgstr ""
 
 msgid ""
 "Enable this option for automated chamber temperature control. This option "
-"activates the emitting of an M191 command before the \"machine_start_gcode"
-"\"\n"
+"activates the emitting of an M191 command before the "
+"\"machine_start_gcode\"\n"
 " which sets the chamber temperature and waits until it is reached. In "
 "addition, it emits an M141 command at the end of the print to turn off the "
 "chamber heater, if present.\n"
@@ -17084,9 +16857,6 @@ msgstr ""
 msgid "Invalid value when spiral vase mode is enabled: "
 msgstr ""
 
-msgid "Bridge line width must not exceed nozzle diameter: "
-msgstr ""
-
 msgid "too large line width "
 msgstr ""
 
@@ -17327,14 +17097,8 @@ msgid "Debug level"
 msgstr ""
 
 msgid ""
-"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
-"trace\n"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Redirects debug logging to file.\n"
+"Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
+"5:trace\n"
 msgstr ""
 
 msgid "Enable timelapse for print"
@@ -17745,6 +17509,9 @@ msgstr ""
 msgid "Generating infill toolpath"
 msgstr ""
 
+msgid "Z contouring"
+msgstr ""
+
 msgid "Detect overhangs for auto-lift"
 msgstr ""
 
@@ -18658,15 +18425,6 @@ msgstr ""
 msgid "Top Surface Pattern"
 msgstr ""
 
-msgid "Choose a slot for the selected color"
-msgstr ""
-
-msgid "Material in the material station"
-msgstr ""
-
-msgid "Only materials of the same type can be selected."
-msgstr ""
-
 msgid "Send G-code to printer host"
 msgstr ""
 
@@ -18689,48 +18447,6 @@ msgstr ""
 msgid "Upload"
 msgstr ""
 
-msgid "Leveling before print"
-msgstr ""
-
-msgid "Time-lapse"
-msgstr ""
-
-msgid "Enable IFS"
-msgstr ""
-
-#, c-format, boost-format
-msgid "Detected %d IFS slots on printer."
-msgstr ""
-
-msgid "This printer does not report a material station."
-msgstr ""
-
-msgid "Unable to read IFS slots from printer."
-msgstr ""
-
-msgid "Loading IFS slots from printer..."
-msgstr ""
-
-msgid "Slice the plate first to get project material information."
-msgstr ""
-
-msgid ""
-"This plate uses multiple materials. Enable IFS and assign each tool to a "
-"printer slot."
-msgstr ""
-
-msgid "Each project material must be assigned to an IFS slot before printing."
-msgstr ""
-
-msgid ""
-"Each project material must be assigned to a loaded IFS slot before printing."
-msgstr ""
-
-msgid ""
-"Each project material must match the material loaded in the selected IFS "
-"slot."
-msgstr ""
-
 msgid "Print host upload queue"
 msgstr ""
 
@@ -18773,6 +18489,9 @@ msgid ""
 "starting the print."
 msgstr ""
 
+msgid "Time-lapse"
+msgstr ""
+
 msgid "Heated Bed Leveling"
 msgstr ""
 
@@ -18782,16 +18501,6 @@ msgstr ""
 msgid "Smooth Build Plate (Side B)"
 msgstr ""
 
-#, c-format, boost-format
-msgid "Printer: %s"
-msgstr ""
-
-msgid "Calibrate before printing"
-msgstr ""
-
-msgid "Filament Mapping:"
-msgstr ""
-
 msgid "Unable to perform boolean operation on selected parts"
 msgstr ""
 
@@ -18967,8 +18676,8 @@ msgid ""
 msgstr ""
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\".\n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\".\n"
 "To add preset for more printers, please go to printer selection"
 msgstr ""
 
@@ -19423,18 +19132,9 @@ msgid ""
 "agents are registered at startup."
 msgstr ""
 
-msgid "Select a Flashforge printer"
-msgstr ""
-
-msgid "Discovered Printers"
-msgstr ""
-
 msgid "Could not get a valid Printer Host reference"
 msgstr ""
 
-msgid "Valid session not detected. Proceed with login to 3DPrinterOS?"
-msgstr ""
-
 msgid "Success!"
 msgstr ""
 
@@ -19475,30 +19175,6 @@ msgstr ""
 msgid "Connection to printers connected via the print host failed."
 msgstr ""
 
-msgid "3DPrinterOS Cloud upload options"
-msgstr ""
-
-msgid "Single file"
-msgstr ""
-
-msgid "Project File"
-msgstr ""
-
-msgid "Project:"
-msgstr ""
-
-msgid "Printer type:"
-msgstr ""
-
-msgid "Printer type not found, please select manually."
-msgstr ""
-
-msgid "Authorizing..."
-msgstr ""
-
-msgid "Error session check"
-msgstr ""
-
 #, c-format, boost-format
 msgid "Mismatched type of print host: %s"
 msgstr ""
@@ -20116,27 +19792,12 @@ msgstr ""
 msgid "SimplyPrint account not linked. Go to Connect options to set it up."
 msgstr ""
 
-msgid "Flashforge returned an invalid JSON response."
-msgstr ""
-
-msgid "No Flashforge printers were discovered on the local network."
-msgstr ""
-
-msgid "Connected to Flashforge local API successfully."
-msgstr ""
-
 msgid "Serial connection to Flashforge is working correctly."
 msgstr ""
 
-msgid "Could not connect to Flashforge local API"
-msgstr ""
-
 msgid "Could not connect to Flashforge via serial"
 msgstr ""
 
-msgid "Flashforge local API requires both serial number and access code."
-msgstr ""
-
 msgid "The provided state is not correct."
 msgstr ""
 
@@ -20659,53 +20320,6 @@ msgstr ""
 "ABS, appropriately increasing the heatbed temperature can reduce the "
 "probability of warping?"
 
-#~ msgid ""
-#~ "The Wipe option is not available when using the Firmware Retraction "
-#~ "mode.\n"
-#~ "\n"
-#~ "Shall I disable it in order to enable Firmware Retraction?"
-#~ msgstr ""
-#~ "The Wipe option is not available when using the Firmware Retraction "
-#~ "mode.\n"
-#~ "\n"
-#~ "Disable it in order to enable Firmware Retraction?"
-
-#, no-c-format, no-boost-format
-#~ msgid ""
-#~ "Bridging angle override. If left to zero, the bridging angle will be "
-#~ "calculated automatically. Otherwise the provided angle will be used for "
-#~ "external bridges. Use 180° for zero angle."
-#~ msgstr ""
-#~ "Bridging angle override. 0 means the bridging angle will be calculated "
-#~ "automatically. Otherwise the provided angle will be used for external "
-#~ "bridges. Use 180° for zero angle."
-
-#~ msgid ""
-#~ "If enabled, bridges are more reliable, can bridge longer distances, but "
-#~ "may look worse. If disabled, bridges look better but are reliable just "
-#~ "for shorter bridged distances."
-#~ msgstr ""
-#~ "If enabled, bridges are more reliable and can bridge longer distances but "
-#~ "may look worse. If disabled, bridges look better but are reliable only "
-#~ "for shorter distances."
-
-#~ msgid "Filament to print internal sparse infill."
-#~ msgstr "This is the filament for printing internal sparse infill."
-
-#~ msgid ""
-#~ "Filament to print support base and raft. \"Default\" means no specific "
-#~ "filament for support and current filament is used."
-#~ msgstr ""
-#~ "Filament to print support bases and rafts. \"Default\" means no specific "
-#~ "filament for support, and current filament is used"
-
-#~ msgid ""
-#~ "Filament to print support interface. \"Default\" means no specific "
-#~ "filament for support interface and current filament is used."
-#~ msgstr ""
-#~ "Filament to print support interfaces. \"Default\" means no specific "
-#~ "filament for support interface, and current filament is used"
-
 #~ msgid "Object/Part Setting"
 #~ msgstr "Object/part settings"
 

localization/i18n/list.txt

@@ -218,7 +218,6 @@ src/slic3r/GUI/CreatePresetsDialog.cpp
 src/slic3r/GUI/DailyTips.cpp
 src/slic3r/Utils/CalibUtils.cpp
 src/slic3r/GUI/PhysicalPrinterDialog.cpp
-src/slic3r/Utils/3DPrinterOS.cpp
 src/slic3r/Utils/AstroBox.cpp
 src/slic3r/Utils/Duet.cpp
 src/slic3r/Utils/FlashAir.cpp
@@ -251,3 +250,7 @@ src/slic3r/GUI/RammingChart.cpp
 src/slic3r/GUI/StepMeshDialog.cpp
 src/slic3r/GUI/FilamentPickerDialog.hpp
 src/libslic3r/PresetBundle.cpp
+src/slic3r/GUI/MixedFilamentColorMatchDialog.cpp
+src/slic3r/GUI/MixedFilamentColorMatchDialog.hpp
+src/slic3r/GUI/MixedFilamentConfigPanel.cpp
+src/slic3r/GUI/MixedFilamentConfigPanel.hpp

resources/images/OrcaSlicer_horizontal_dark.svg

@@ -1 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" width="214" height="80" viewBox="0 0 214 80"><g id="b"><g id="c"><rect width="80" height="80" rx="9.57" ry="9.57" style="fill:#949494;"/></g></g><g id="d"><path id="e" d="M17.3,62.94c4.46,4.45,10.59,7.21,17.36,7.24,13.7.06,24.93-11.22,24.87-25-.03-6.81-2.77-12.97-7.2-17.45L17.31,62.94h0Z" style="fill:#292826;"/></g><g id="f"><path id="g" d="M52.32,27.73L17.3,62.94s.05.05.08.07c12.27-6.26,29.08-17.26,40.6-26.43-1.24-3.36-3.19-6.38-5.65-8.87" style="fill:#009789;"/></g><g id="h"><path id="i" d="M45.48,9.82c-13.67,0-24.77,11.15-24.77,24.91,0,6.85,2.75,13.05,7.2,17.56L62.94,17.07c-4.48-4.47-10.65-7.24-17.46-7.24" style="fill:#292826;"/></g><g id="j"><path id="k" d="M45.48,9.82c-4.74,0-9.17,1.34-12.93,3.65-2.02-.53-4.52-.95-7.39-.93-5,.03-9.08,1.39-11.85,2.65-.69.32-.58,1.33.16,1.49,1.82.39,4.22,1.19,6.59,2.95,1.5,1.1,2.64,2.33,3.5,3.48-1.82,3.47-2.85,7.42-2.85,11.61,0,2.5.37,4.92,1.05,7.2,1.04-2.32,2.14-3.87,2.5-4.36,2.27-3.13,4.68-4.76,8.23-7.15,2.62-1.77,6.26-3.84,16.7-8.14,0,0,3.27-.92,7.65-3.53,1.75-1.04,3.08-2.02,3.5-3.56.03-.11.06-.22.08-.32-4.15-3.17-9.33-5.04-14.95-5.04" style="fill:#262523;"/></g><g id="l"><path id="m" d="M49.61,18.19c.9,1.61-.91,4.37-4.06,6.17s-6.44,1.96-7.35.36c-.9-1.61.91-4.37,4.06-6.17,3.15-1.8,6.44-1.96,7.35-.36" style="fill:#949494;"/></g><path d="M142.44,48.1c-1.01,0-1.84.82-1.84,1.84v18.4c0,1.01.82,1.84,1.84,1.84s1.84-.82,1.84-1.84v-18.4c0-1.01-.82-1.84-1.84-1.84ZM190.71,48.1h-4.4c-6.09,0-11.04,4.96-11.04,11.04s4.96,11.04,11.04,11.04h4.4c1.01,0,1.84-.82,1.84-1.84s-.82-1.84-1.84-1.84h-4.4c-4.06,0-7.36-3.3-7.36-7.36s3.3-7.36,7.36-7.36h4.4c1.01,0,1.84-.82,1.84-1.84s-.82-1.84-1.84-1.84v-.02.02ZM190.71,57.31h-5.35c-1.01,0-1.84.82-1.84,1.84s.82,1.84,1.84,1.84h5.35c1.01,0,1.84-.82,1.84-1.84s-.82-1.84-1.84-1.84ZM105.69,70.18h-8.91c-1.01,0-1.83-.82-1.83-1.83s.81-1.83,1.83-1.83h8.91c1.53,0,2.78-1.24,2.78-2.78s-1.24-2.77-2.78-2.77h-4.31c-3.55,0-6.43-2.89-6.43-6.43s2.89-6.43,6.43-6.43h7.29c1.01,0,1.83.82,1.83,1.83s-.81,1.83-1.83,1.83h-7.29c-1.53,0-2.78,1.24-2.78,2.78s1.24,2.77,2.78,2.77h4.31c3.55,0,6.43,2.89,6.43,6.43s-2.89,6.43-6.43,6.43h0ZM165.89,65.28c-1.49.98-3.35,1.44-5.32,1.11-2.99-.51-5.4-2.88-5.96-5.85-.86-4.67,2.71-8.76,7.23-8.76,1.49,0,2.88.45,4.04,1.21.73.49,1.71.41,2.32-.22h0c.81-.81.71-2.17-.25-2.81-2.12-1.42-4.76-2.13-7.56-1.77-4.98.64-8.97,4.69-9.52,9.66-.75,6.65,4.46,12.32,10.96,12.32,2.23,0,4.31-.67,6.05-1.81.98-.65,1.15-2.03.32-2.86h0c-.63-.63-1.59-.71-2.32-.23h.01ZM132.24,66.5h-5.31c-2.53,0-4.6-2.07-4.6-4.6v-11.96c0-1.01-.82-1.84-1.84-1.84s-1.84.82-1.84,1.84v11.96c0,4.57,3.71,8.28,8.28,8.28h5.31c1.01,0,1.84-.82,1.84-1.84s-.82-1.84-1.84-1.84h0ZM211.96,51.79h-1.84c-4.03,0-7.32,3.27-7.36,7.3v9.27c0,1.01-.82,1.84-1.84,1.84s-1.84-.82-1.84-1.84v-9.27c.04-6.06,4.98-10.97,11.03-10.97h1.84c1.01,0,1.84.82,1.84,1.84s-.82,1.84-1.84,1.84h0Z" style="fill:#949494;"/><path d="M109.73,14.37c5.64,0,10.24,4.59,10.24,10.24s-4.59,10.24-10.24,10.24-10.24-4.59-10.24-10.24,4.59-10.24,10.24-10.24M109.73,9.82c-8.16,0-14.79,6.62-14.79,14.79s6.62,14.79,14.79,14.79,14.79-6.62,14.79-14.79-6.62-14.79-14.79-14.79h0ZM211.52,9.82c-1.26,0-2.27,1.02-2.27,2.27v1.86c-2.66-2.55-6.26-4.13-10.24-4.13-8.16,0-14.79,6.62-14.79,14.79s6.62,14.79,14.79,14.79c3.97,0,7.58-1.58,10.24-4.13v1.86c0,1.26,1.02,2.27,2.27,2.27s2.27-1.02,2.27-2.27V12.1c0-1.26-1.02-2.27-2.27-2.27h0ZM199.01,34.85c-5.64,0-10.24-4.59-10.24-10.24s4.59-10.24,10.24-10.24,10.24,4.59,10.24,10.24-4.59,10.24-10.24,10.24ZM148.11,9.82h-2.27c-8.16,0-14.79,6.62-14.79,14.79v12.51c0,1.26,1.02,2.27,2.27,2.27s2.27-1.02,2.27-2.27v-12.51c0-5.64,4.59-10.24,10.24-10.24h2.27c1.26,0,2.27-1.02,2.27-2.27s-1.02-2.27-2.27-2.27h0ZM175.38,33.05c-1.99,1.36-4.47,2.05-7.12,1.71-4.61-.59-8.31-4.35-8.84-8.97-.7-6.18,4.13-11.43,10.17-11.43,2.14,0,4.11.66,5.75,1.77.92.63,2.15.56,2.95-.24h0c1.02-1.02.83-2.7-.36-3.52-2.75-1.89-6.18-2.86-9.84-2.49-6.85.68-12.42,6.17-13.19,13.01-1,8.93,5.97,16.49,14.7,16.49,3.11,0,5.99-.95,8.36-2.59,1.18-.81,1.34-2.49.33-3.51h0c-.78-.78-2-.88-2.91-.26v.02h0Z" style="fill:#009789;"/></svg>

resources/images/OrcaSlicer_horizontal_light.svg

@@ -1 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" width="214" height="80" viewBox="0 0 214 80"><g id="b"><g id="c"><rect width="80" height="80" rx="9.57" ry="9.57" style="fill:#e9e9e9;"/></g></g><g id="d"><path id="e" d="M17.3,62.94c4.46,4.45,10.59,7.21,17.36,7.24,13.7.06,24.93-11.22,24.87-25-.03-6.81-2.77-12.97-7.2-17.45L17.31,62.94h0Z" style="fill:#292826;"/></g><g id="f"><path id="g" d="M52.32,27.73L17.3,62.94s.05.05.08.07c12.27-6.26,29.08-17.26,40.6-26.43-1.24-3.36-3.19-6.38-5.65-8.87" style="fill:#009789;"/></g><g id="h"><path id="i" d="M45.48,9.82c-13.67,0-24.77,11.15-24.77,24.91,0,6.85,2.75,13.05,7.2,17.56L62.94,17.07c-4.48-4.47-10.65-7.24-17.46-7.24" style="fill:#292826;"/></g><g id="j"><path id="k" d="M45.48,9.82c-4.74,0-9.17,1.34-12.93,3.65-2.02-.53-4.52-.95-7.39-.93-5,.03-9.08,1.39-11.85,2.65-.69.32-.58,1.33.16,1.49,1.82.39,4.22,1.19,6.59,2.95,1.5,1.1,2.64,2.33,3.5,3.48-1.82,3.47-2.85,7.42-2.85,11.61,0,2.5.37,4.92,1.05,7.2,1.04-2.32,2.14-3.87,2.5-4.36,2.27-3.13,4.68-4.76,8.23-7.15,2.62-1.77,6.26-3.84,16.7-8.14,0,0,3.27-.92,7.65-3.53,1.75-1.04,3.08-2.02,3.5-3.56.03-.11.06-.22.08-.32-4.15-3.17-9.33-5.04-14.95-5.04" style="fill:#262523;"/></g><g id="l"><path id="m" d="M49.61,18.19c.9,1.61-.91,4.37-4.06,6.17s-6.44,1.96-7.35.36c-.9-1.61.91-4.37,4.06-6.17,3.15-1.8,6.44-1.96,7.35-.36" style="fill:#fff;"/></g><path d="M142.44,48.1c-1.01,0-1.84.82-1.84,1.84v18.4c0,1.01.82,1.84,1.84,1.84s1.84-.82,1.84-1.84v-18.4c0-1.01-.82-1.84-1.84-1.84ZM190.71,48.1h-4.4c-6.09,0-11.04,4.96-11.04,11.04s4.96,11.04,11.04,11.04h4.4c1.01,0,1.84-.82,1.84-1.84s-.82-1.84-1.84-1.84h-4.4c-4.06,0-7.36-3.3-7.36-7.36s3.3-7.36,7.36-7.36h4.4c1.01,0,1.84-.82,1.84-1.84s-.82-1.84-1.84-1.84v-.02.02ZM190.71,57.31h-5.35c-1.01,0-1.84.82-1.84,1.84s.82,1.84,1.84,1.84h5.35c1.01,0,1.84-.82,1.84-1.84s-.82-1.84-1.84-1.84ZM105.69,70.18h-8.91c-1.01,0-1.83-.82-1.83-1.83s.81-1.83,1.83-1.83h8.91c1.53,0,2.78-1.24,2.78-2.78s-1.24-2.77-2.78-2.77h-4.31c-3.55,0-6.43-2.89-6.43-6.43s2.89-6.43,6.43-6.43h7.29c1.01,0,1.83.82,1.83,1.83s-.81,1.83-1.83,1.83h-7.29c-1.53,0-2.78,1.24-2.78,2.78s1.24,2.77,2.78,2.77h4.31c3.55,0,6.43,2.89,6.43,6.43s-2.89,6.43-6.43,6.43h0ZM165.89,65.28c-1.49.98-3.35,1.44-5.32,1.11-2.99-.51-5.4-2.88-5.96-5.85-.86-4.67,2.71-8.76,7.23-8.76,1.49,0,2.88.45,4.04,1.21.73.49,1.71.41,2.32-.22h0c.81-.81.71-2.17-.25-2.81-2.12-1.42-4.76-2.13-7.56-1.77-4.98.64-8.97,4.69-9.52,9.66-.75,6.65,4.46,12.32,10.96,12.32,2.23,0,4.31-.67,6.05-1.81.98-.65,1.15-2.03.32-2.86h0c-.63-.63-1.59-.71-2.32-.23h.01ZM132.24,66.5h-5.31c-2.53,0-4.6-2.07-4.6-4.6v-11.96c0-1.01-.82-1.84-1.84-1.84s-1.84.82-1.84,1.84v11.96c0,4.57,3.71,8.28,8.28,8.28h5.31c1.01,0,1.84-.82,1.84-1.84s-.82-1.84-1.84-1.84h0ZM211.96,51.79h-1.84c-4.03,0-7.32,3.27-7.36,7.3v9.27c0,1.01-.82,1.84-1.84,1.84s-1.84-.82-1.84-1.84v-9.27c.04-6.06,4.98-10.97,11.03-10.97h1.84c1.01,0,1.84.82,1.84,1.84s-.82,1.84-1.84,1.84h0Z" style="fill:#949494;"/><path d="M109.73,14.37c5.64,0,10.24,4.59,10.24,10.24s-4.59,10.24-10.24,10.24-10.24-4.59-10.24-10.24,4.59-10.24,10.24-10.24M109.73,9.82c-8.16,0-14.79,6.62-14.79,14.79s6.62,14.79,14.79,14.79,14.79-6.62,14.79-14.79-6.62-14.79-14.79-14.79h0ZM211.52,9.82c-1.26,0-2.27,1.02-2.27,2.27v1.86c-2.66-2.55-6.26-4.13-10.24-4.13-8.16,0-14.79,6.62-14.79,14.79s6.62,14.79,14.79,14.79c3.97,0,7.58-1.58,10.24-4.13v1.86c0,1.26,1.02,2.27,2.27,2.27s2.27-1.02,2.27-2.27V12.1c0-1.26-1.02-2.27-2.27-2.27h0ZM199.01,34.85c-5.64,0-10.24-4.59-10.24-10.24s4.59-10.24,10.24-10.24,10.24,4.59,10.24,10.24-4.59,10.24-10.24,10.24ZM148.11,9.82h-2.27c-8.16,0-14.79,6.62-14.79,14.79v12.51c0,1.26,1.02,2.27,2.27,2.27s2.27-1.02,2.27-2.27v-12.51c0-5.64,4.59-10.24,10.24-10.24h2.27c1.26,0,2.27-1.02,2.27-2.27s-1.02-2.27-2.27-2.27h0ZM175.38,33.05c-1.99,1.36-4.47,2.05-7.12,1.71-4.61-.59-8.31-4.35-8.84-8.97-.7-6.18,4.13-11.43,10.17-11.43,2.14,0,4.11.66,5.75,1.77.92.63,2.15.56,2.95-.24h0c1.02-1.02.83-2.7-.36-3.52-2.75-1.89-6.18-2.86-9.84-2.49-6.85.68-12.42,6.17-13.19,13.01-1,8.93,5.97,16.49,14.7,16.49,3.11,0,5.99-.95,8.36-2.59,1.18-.81,1.34-2.49.33-3.51h0c-.78-.78-2-.88-2.91-.26v.02h0Z" style="fill:#009789;"/></svg>

resources/images/param_junction_deviation.svg

@@ -1,10 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="18" height="18" viewBox="0 0 18 18">
-  <line x1="0.5" y1="4.5" x2="7.5" y2="4.5" style="fill:none;stroke:#949494;stroke-linecap:square;stroke-linejoin:round"/>
-  <line x1="15.5" y1="4.5" x2="16.5" y2="4.5" style="fill:none;stroke:#949494;stroke-linecap:square;stroke-linejoin:round"/>
-  <rect x="7.5" y="0.5" width="8" height="13" rx="1" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/>
-  <circle cx="11.5" cy="7.5" r="2" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/>
-  <polyline points="9.5 13.5 11.5 16.5 13.5 13.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/>
-
-  <path d="M1.5 6.2 L1.5 11.6 C1.5 14.0 3.0 15.5 5.4 15.5 L8.2 15.5"
-        style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/>
-</svg>

resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 Max 0.25 nozzle.json

@@ -1,105 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic ABS @Anycubic Kobra S1 Max 0.25 nozzle",
-	"inherits": "fdm_filament_abs",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFABS",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic ABS @Anycubic Kobra S1 Max 0.25 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"ABS"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.25 nozzle"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"60"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed_BRASS": [
-		"60"
-	],
-	"fan_max_speed_HS": [
-		"60"
-	],
-	"fan_min_speed_BRASS": [
-		"40"
-	],
-	"fan_min_speed_HS": [
-		"40"
-	],
-	"fan_speed_after_x_layers": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"nozzle_temperature_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_HS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"270"
-	],
-	"nozzle_temperature_range_high": [
-		"280"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"80"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"pressure_advance": [
-		"0.032"
-	],
-	"slow_down_layer_time_BRASS": [
-		"12"
-	],
-	"temperature_vitrification": [
-		"100"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -1,336 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic ABS @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_filament_abs",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFABS",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic ABS @Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"ABS"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"65"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"80"
-	],
-	"fan_max_speed_BRASS": [
-		"60"
-	],
-	"fan_max_speed_HS": [
-		"60"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"200"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.04"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode "
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.8"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"250"
-	],
-	"nozzle_temperature_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_HS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"250"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"260"
-	],
-	"nozzle_temperature_range_high": [
-		"280"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.024"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"3"
-	],
-	"slow_down_layer_time_BRASS": [
-		"6"
-	],
-	"slow_down_layer_time_HS": [
-		"6"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"100"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic ABS @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_filament_abs",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFABS",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic ABS @Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"ABS"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"65"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"80"
-	],
-	"fan_max_speed_BRASS": [
-		"80"
-	],
-	"fan_max_speed_HS": [
-		"80"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"fan_min_speed_BRASS": [
-		"30"
-	],
-	"fan_min_speed_HS": [
-		"30"
-	],
-	"filament_adhesiveness_category": [
-		"200"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"260"
-	],
-	"nozzle_temperature_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_HS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"260"
-	],
-	"nozzle_temperature_range_high": [
-		"280"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"3"
-	],
-	"slow_down_layer_time_BRASS": [
-		"6"
-	],
-	"slow_down_layer_time_HS": [
-		"6"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"90"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic ABS @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_filament_abs",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFABS",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic ABS @Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"ABS"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"65"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"80"
-	],
-	"fan_max_speed_HS": [
-		"80"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"30"
-	],
-	"fan_min_speed_HS": [
-		"30"
-	],
-	"filament_adhesiveness_category": [
-		"200"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.04"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"60"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"100"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_HS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"260"
-	],
-	"nozzle_temperature_range_high": [
-		"280"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"6"
-	],
-	"slow_down_layer_time_HS": [
-		"6"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"100"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 Max 0.25 nozzle.json

@@ -1,99 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic ASA @Anycubic Kobra S1 Max 0.25 nozzle",
-	"inherits": "fdm_filament_asa",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFASA",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic ASA @Anycubic Kobra S1 Max 0.25 nozzle"
-	],
-	"filament_type": [
-		"ASA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.25 nozzle"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"60"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed_BRASS": [
-		"40"
-	],
-	"fan_max_speed_HS": [
-		"40"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"nozzle_temperature_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_HS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"270"
-	],
-	"nozzle_temperature_range_high": [
-		"280"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"80"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"pressure_advance": [
-		"0.032"
-	],
-	"slow_down_layer_time_BRASS": [
-		"12"
-	],
-	"temperature_vitrification": [
-		"100"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -1,336 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic ASA @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_filament_asa",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFASA",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic ASA @Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"ASA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"65"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"80"
-	],
-	"fan_max_speed_BRASS": [
-		"60"
-	],
-	"fan_max_speed_HS": [
-		"60"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"200"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.06"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.8"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"110"
-	],
-	"hot_plate_temp_initial_layer": [
-		"110"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"250"
-	],
-	"nozzle_temperature_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_HS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"250"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"270"
-	],
-	"nozzle_temperature_range_high": [
-		"280"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.04"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"3"
-	],
-	"slow_down_layer_time_BRASS": [
-		"6"
-	],
-	"slow_down_layer_time_HS": [
-		"6"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"100"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"110"
-	],
-	"textured_plate_temp_initial_layer": [
-		"110"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic ASA @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_filament_asa",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFASA",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic ASA @Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"ASA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"65"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"100"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"35"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"35"
-	],
-	"fan_cooling_layer_time_HS": [
-		"35"
-	],
-	"fan_max_speed": [
-		"80"
-	],
-	"fan_max_speed_BRASS": [
-		"80"
-	],
-	"fan_max_speed_HS": [
-		"100"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"fan_min_speed_BRASS": [
-		"30"
-	],
-	"fan_min_speed_HS": [
-		"30"
-	],
-	"filament_adhesiveness_category": [
-		"200"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.04"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"260"
-	],
-	"nozzle_temperature_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_HS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"260"
-	],
-	"nozzle_temperature_range_high": [
-		"280"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"3"
-	],
-	"slow_down_layer_time_BRASS": [
-		"8"
-	],
-	"slow_down_layer_time_HS": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"55"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic ASA @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_filament_asa",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFASA",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic ASA @Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"ASA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"65"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"80"
-	],
-	"fan_max_speed_HS": [
-		"80"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"30"
-	],
-	"fan_min_speed_HS": [
-		"30"
-	],
-	"filament_adhesiveness_category": [
-		"200"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.06"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"60"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"100"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_HS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"260"
-	],
-	"nozzle_temperature_range_high": [
-		"280"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"6"
-	],
-	"slow_down_layer_time_HS": [
-		"6"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"100"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PA @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -1,336 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PA @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_filament_pa",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPA",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PA @Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"1"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"60"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"5"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"65"
-	],
-	"fan_cooling_layer_time_HS": [
-		"65"
-	],
-	"fan_max_speed": [
-		"40"
-	],
-	"fan_max_speed_BRASS": [
-		"90"
-	],
-	"fan_max_speed_HS": [
-		"90"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"fan_min_speed_BRASS": [
-		"40"
-	],
-	"fan_min_speed_HS": [
-		"40"
-	],
-	"filament_adhesiveness_category": [
-		"400"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.08"
-	],
-	"filament_deretraction_speed": [
-		"0"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"0%"
-	],
-	"filament_retract_lift_above": [
-		"0"
-	],
-	"filament_retract_lift_below": [
-		"349"
-	],
-	"filament_retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"filament_retract_restart_extra": [
-		"0"
-	],
-	"filament_retract_when_changing_layer": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"1"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"filament_z_hop_types": [
-		"Auto Lift"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"260"
-	],
-	"nozzle_temperature_BRASS": [
-		"280"
-	],
-	"nozzle_temperature_HS": [
-		"280"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"280"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"280"
-	],
-	"nozzle_temperature_range_high": [
-		"280"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.04"
-	],
-	"reduce_fan_stop_start_freq": [
-		"0"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"2"
-	],
-	"slow_down_layer_time_BRASS": [
-		"8"
-	],
-	"slow_down_layer_time_HS": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"108"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PA @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PA @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_filament_pa",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPA",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PA @Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"60"
-	],
-	"chamber_temperature": [
-		"40"
-	],
-	"close_fan_the_first_x_layers": [
-		"2"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"65"
-	],
-	"fan_cooling_layer_time_HS": [
-		"65"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"90"
-	],
-	"fan_max_speed_HS": [
-		"90"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"40"
-	],
-	"fan_min_speed_HS": [
-		"40"
-	],
-	"filament_adhesiveness_category": [
-		"400"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.08"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"100"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_HS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"260"
-	],
-	"nozzle_temperature_range_high": [
-		"280"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"0"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"8"
-	],
-	"slow_down_layer_time_HS": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"55"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PA @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PA @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_filament_pa",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPA",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PA @Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"60"
-	],
-	"close_fan_the_first_x_layers": [
-		"2"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"65"
-	],
-	"fan_cooling_layer_time_HS": [
-		"65"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"90"
-	],
-	"fan_max_speed_HS": [
-		"90"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"40"
-	],
-	"fan_min_speed_HS": [
-		"40"
-	],
-	"filament_adhesiveness_category": [
-		"400"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.08"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_HS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"260"
-	],
-	"nozzle_temperature_range_high": [
-		"280"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.026"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"8"
-	],
-	"slow_down_layer_time_HS": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"108"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PA6-CF @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -1,336 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PA6-CF @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_filament_pa",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPA6-CF",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PA6-CF @Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PA6-CF"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"65"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"5"
-	],
-	"fan_cooling_layer_time_HS": [
-		"5"
-	],
-	"fan_max_speed": [
-		"40"
-	],
-	"fan_max_speed_BRASS": [
-		"30"
-	],
-	"fan_max_speed_HS": [
-		"30"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"400"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.1"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.8"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"30"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"110"
-	],
-	"hot_plate_temp_initial_layer": [
-		"110"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"260"
-	],
-	"nozzle_temperature_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_HS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"270"
-	],
-	"nozzle_temperature_range_high": [
-		"300"
-	],
-	"nozzle_temperature_range_low": [
-		"260"
-	],
-	"overhang_fan_speed": [
-		"40"
-	],
-	"overhang_fan_threshold": [
-		"0%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.025"
-	],
-	"reduce_fan_stop_start_freq": [
-		"0"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"6"
-	],
-	"slow_down_layer_time_BRASS": [
-		"2"
-	],
-	"slow_down_layer_time_HS": [
-		"2"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"170"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"110"
-	],
-	"textured_plate_temp_initial_layer": [
-		"110"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PA6-CF @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PA6-CF @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_filament_pa",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPA6-CF",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PA6-CF @Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PA6-CF"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"65"
-	],
-	"close_fan_the_first_x_layers": [
-		"2"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"5"
-	],
-	"fan_cooling_layer_time_HS": [
-		"5"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"30"
-	],
-	"fan_max_speed_HS": [
-		"30"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"400"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.1"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.8"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_HS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"260"
-	],
-	"nozzle_temperature_range_high": [
-		"300"
-	],
-	"nozzle_temperature_range_low": [
-		"260"
-	],
-	"overhang_fan_speed": [
-		"60"
-	],
-	"overhang_fan_threshold": [
-		"0%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"0"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"2"
-	],
-	"slow_down_layer_time_HS": [
-		"2"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"55"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"110"
-	],
-	"textured_plate_temp_initial_layer": [
-		"110"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PA6-CF @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PA6-CF @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_filament_pa",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPA6-CF",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PA6-CF @Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PA6-CF"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"65"
-	],
-	"close_fan_the_first_x_layers": [
-		"2"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"5"
-	],
-	"fan_cooling_layer_time_HS": [
-		"5"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"30"
-	],
-	"fan_max_speed_HS": [
-		"30"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"0"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.1"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.8"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_HS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"260"
-	],
-	"nozzle_temperature_range_high": [
-		"300"
-	],
-	"nozzle_temperature_range_low": [
-		"260"
-	],
-	"overhang_fan_speed": [
-		"60"
-	],
-	"overhang_fan_threshold": [
-		"0%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.025"
-	],
-	"reduce_fan_stop_start_freq": [
-		"0"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"2"
-	],
-	"slow_down_layer_time_HS": [
-		"2"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"55"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"110"
-	],
-	"textured_plate_temp_initial_layer": [
-		"110"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -1,336 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_filament_pa",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPAHT-CF",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PAHT-CF"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"60"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"5"
-	],
-	"fan_cooling_layer_time_HS": [
-		"5"
-	],
-	"fan_max_speed": [
-		"40"
-	],
-	"fan_max_speed_BRASS": [
-		"30"
-	],
-	"fan_max_speed_HS": [
-		"30"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"400"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"80"
-	],
-	"filament_density": [
-		"1.08"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.8"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"260"
-	],
-	"nozzle_temperature_BRASS": [
-		"280"
-	],
-	"nozzle_temperature_HS": [
-		"280"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"280"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"280"
-	],
-	"nozzle_temperature_range_high": [
-		"320"
-	],
-	"nozzle_temperature_range_low": [
-		"260"
-	],
-	"overhang_fan_speed": [
-		"30"
-	],
-	"overhang_fan_threshold": [
-		"0%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.025"
-	],
-	"reduce_fan_stop_start_freq": [
-		"0"
-	],
-	"required_nozzle_HRC": [
-		"30"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"6"
-	],
-	"slow_down_layer_time_BRASS": [
-		"2"
-	],
-	"slow_down_layer_time_HS": [
-		"2"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"180"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_filament_pa",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPAHT-CF",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PAHT-CF"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"65"
-	],
-	"close_fan_the_first_x_layers": [
-		"2"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"5"
-	],
-	"fan_cooling_layer_time_HS": [
-		"5"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"30"
-	],
-	"fan_max_speed_HS": [
-		"30"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"500"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.08"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"280"
-	],
-	"nozzle_temperature_HS": [
-		"280"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"280"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"280"
-	],
-	"nozzle_temperature_range_high": [
-		"300"
-	],
-	"nozzle_temperature_range_low": [
-		"260"
-	],
-	"overhang_fan_speed": [
-		"60"
-	],
-	"overhang_fan_threshold": [
-		"0%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"0"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"2"
-	],
-	"slow_down_layer_time_HS": [
-		"2"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"0"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"110"
-	],
-	"textured_plate_temp_initial_layer": [
-		"110"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_filament_pa",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPAHT-CF",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PAHT-CF"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"65"
-	],
-	"close_fan_the_first_x_layers": [
-		"2"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"5"
-	],
-	"fan_cooling_layer_time_HS": [
-		"5"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"30"
-	],
-	"fan_max_speed_HS": [
-		"30"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"500"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.08"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"280"
-	],
-	"nozzle_temperature_HS": [
-		"280"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"280"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"280"
-	],
-	"nozzle_temperature_range_high": [
-		"320"
-	],
-	"nozzle_temperature_range_low": [
-		"260"
-	],
-	"overhang_fan_speed": [
-		"60"
-	],
-	"overhang_fan_threshold": [
-		"0%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.026"
-	],
-	"reduce_fan_stop_start_freq": [
-		"0"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"2"
-	],
-	"slow_down_layer_time_HS": [
-		"2"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"180"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"110"
-	],
-	"textured_plate_temp_initial_layer": [
-		"110"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PC @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -1,336 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PC @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_filament_pc",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPC",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PC @Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PC"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"60"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"fan_max_speed_BRASS": [
-		"60"
-	],
-	"fan_max_speed_HS": [
-		"60"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"500"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.04"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode "
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"110"
-	],
-	"hot_plate_temp_initial_layer": [
-		"110"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"260"
-	],
-	"nozzle_temperature_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_HS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"250"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"260"
-	],
-	"nozzle_temperature_range_high": [
-		"300"
-	],
-	"nozzle_temperature_range_low": [
-		"250"
-	],
-	"overhang_fan_speed": [
-		"60"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.04"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"2"
-	],
-	"slow_down_layer_time_BRASS": [
-		"2"
-	],
-	"slow_down_layer_time_HS": [
-		"2"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"120"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"110"
-	],
-	"textured_plate_temp_initial_layer": [
-		"110"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PC @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -1,354 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PC @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_filament_pc",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPC",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PC @Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PC"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"65"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"60"
-	],
-	"fan_max_speed_HS": [
-		"60"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"fan_speed_after_x_layers": [
-		"0"
-	],
-	"filament_adhesiveness_category": [
-		"500"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.04"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"110"
-	],
-	"hot_plate_temp_initial_layer": [
-		"110"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"100"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_HS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"260"
-	],
-	"nozzle_temperature_range_high": [
-		"300"
-	],
-	"nozzle_temperature_range_low": [
-		"250"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"2"
-	],
-	"slow_down_layer_time_HS": [
-		"2"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"55"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"110"
-	],
-	"textured_plate_temp_initial_layer": [
-		"110"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PC @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PC @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_filament_pc",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPC",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PC @Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PC"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"65"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"60"
-	],
-	"fan_max_speed_HS": [
-		"60"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"500"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.04"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.8"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"110"
-	],
-	"hot_plate_temp_initial_layer": [
-		"110"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"100"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_HS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"260"
-	],
-	"nozzle_temperature_range_high": [
-		"300"
-	],
-	"nozzle_temperature_range_low": [
-		"250"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.025"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"2"
-	],
-	"slow_down_layer_time_HS": [
-		"2"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"120"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"110"
-	],
-	"textured_plate_temp_initial_layer": [
-		"110"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PC-CF @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -1,336 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PC-CF @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_filament_pc",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPC-CF",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PC-CF @Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PC-CF"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.94"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"60"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"fan_max_speed_BRASS": [
-		"40"
-	],
-	"fan_max_speed_HS": [
-		"40"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"500"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.04"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode "
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"110"
-	],
-	"hot_plate_temp_initial_layer": [
-		"110"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"260"
-	],
-	"nozzle_temperature_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_HS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"270"
-	],
-	"nozzle_temperature_range_high": [
-		"300"
-	],
-	"nozzle_temperature_range_low": [
-		"250"
-	],
-	"overhang_fan_speed": [
-		"60"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.04"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"2"
-	],
-	"slow_down_layer_time_BRASS": [
-		"12"
-	],
-	"slow_down_layer_time_HS": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"120"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"110"
-	],
-	"textured_plate_temp_initial_layer": [
-		"110"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PC-CF @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -1,354 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PC-CF @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_filament_pc",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPC-CF",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PC-CF @Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PC-CF"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"65"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"40"
-	],
-	"fan_max_speed_HS": [
-		"40"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"fan_speed_after_x_layers": [
-		"0"
-	],
-	"filament_adhesiveness_category": [
-		"500"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.04"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"110"
-	],
-	"hot_plate_temp_initial_layer": [
-		"110"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"60"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_HS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"270"
-	],
-	"nozzle_temperature_range_high": [
-		"300"
-	],
-	"nozzle_temperature_range_low": [
-		"250"
-	],
-	"overhang_fan_speed": [
-		"60"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"12"
-	],
-	"slow_down_layer_time_HS": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"55"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"110"
-	],
-	"textured_plate_temp_initial_layer": [
-		"110"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PC-CF @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PC-CF @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_filament_pc",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPC-CF",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PC-CF @Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PC-CF"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"65"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"40"
-	],
-	"fan_max_speed_HS": [
-		"40"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"500"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.08"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.8"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"110"
-	],
-	"hot_plate_temp_initial_layer": [
-		"110"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_HS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"270"
-	],
-	"nozzle_temperature_range_high": [
-		"300"
-	],
-	"nozzle_temperature_range_low": [
-		"250"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.025"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"12"
-	],
-	"slow_down_layer_time_HS": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"120"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"110"
-	],
-	"textured_plate_temp_initial_layer": [
-		"110"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PC-GF @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -1,336 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PC-GF @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_filament_pc",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPC-GF",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PC-GF @Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PC-GF"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.94"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"60"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"fan_max_speed_BRASS": [
-		"40"
-	],
-	"fan_max_speed_HS": [
-		"40"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"500"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.04"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode "
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"110"
-	],
-	"hot_plate_temp_initial_layer": [
-		"110"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"260"
-	],
-	"nozzle_temperature_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_HS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"270"
-	],
-	"nozzle_temperature_range_high": [
-		"300"
-	],
-	"nozzle_temperature_range_low": [
-		"250"
-	],
-	"overhang_fan_speed": [
-		"60"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.04"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"2"
-	],
-	"slow_down_layer_time_BRASS": [
-		"12"
-	],
-	"slow_down_layer_time_HS": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"120"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"110"
-	],
-	"textured_plate_temp_initial_layer": [
-		"110"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PC-GF @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -1,354 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PC-GF @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_filament_pc",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPC-GF",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PC-GF @Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PC-GF"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"65"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"40"
-	],
-	"fan_max_speed_HS": [
-		"40"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"fan_speed_after_x_layers": [
-		"0"
-	],
-	"filament_adhesiveness_category": [
-		"500"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.04"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"110"
-	],
-	"hot_plate_temp_initial_layer": [
-		"110"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"60"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_HS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"270"
-	],
-	"nozzle_temperature_range_high": [
-		"300"
-	],
-	"nozzle_temperature_range_low": [
-		"250"
-	],
-	"overhang_fan_speed": [
-		"60"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"12"
-	],
-	"slow_down_layer_time_HS": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"55"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"110"
-	],
-	"textured_plate_temp_initial_layer": [
-		"110"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PC-GF @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PC-GF @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_filament_pc",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPC-GF",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PC-GF @Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PC-GF"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"65"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"40"
-	],
-	"fan_max_speed_HS": [
-		"40"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"500"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.08"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.8"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"110"
-	],
-	"hot_plate_temp_initial_layer": [
-		"110"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_HS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"270"
-	],
-	"nozzle_temperature_range_high": [
-		"300"
-	],
-	"nozzle_temperature_range_low": [
-		"250"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"12"
-	],
-	"slow_down_layer_time_HS": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"120"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"110"
-	],
-	"textured_plate_temp_initial_layer": [
-		"110"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PEBA @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -1,288 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PEBA @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_filament_tpu",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPEBA",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PEBA @Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PEBA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"1"
-	],
-	"filament_max_volumetric_speed": [
-		"5"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"100"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"45"
-	],
-	"eng_plate_temp_initial_layer": [
-		"45"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_cooling_final_speed": [
-		"3.4"
-	],
-	"filament_cooling_initial_speed": [
-		"2.2"
-	],
-	"filament_cooling_moves": [
-		"4"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.08"
-	],
-	"filament_deretraction_speed": [
-		"8"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"28"
-	],
-	"filament_loading_speed_start": [
-		"3"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"30"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"90"
-	],
-	"filament_unloading_speed_start": [
-		"100"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"55"
-	],
-	"hot_plate_temp_initial_layer": [
-		"55"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"nozzle_temperature": [
-		"230"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"nozzle_temperature_range_high": [
-		"280"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"95%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.04"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"100"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"55"
-	],
-	"textured_plate_temp_initial_layer": [
-		"55"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PEBA @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PEBA @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_filament_tpu",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPEBA",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PEBA @Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PEBA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"5"
-	],
-	"activate_air_filtration": [
-		"1"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"60"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"100"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"80"
-	],
-	"fan_cooling_layer_time_HS": [
-		"80"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"100"
-	],
-	"fan_max_speed_HS": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"100"
-	],
-	"fan_min_speed_HS": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"0"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.06"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"40"
-	],
-	"hot_plate_temp_initial_layer": [
-		"40"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"100"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"230"
-	],
-	"nozzle_temperature_HS": [
-		"230"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"230"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"230"
-	],
-	"nozzle_temperature_range_high": [
-		"250"
-	],
-	"nozzle_temperature_range_low": [
-		"220"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"8"
-	],
-	"slow_down_layer_time_HS": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"30"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"40"
-	],
-	"textured_plate_temp_initial_layer": [
-		"40"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PEBA @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PEBA @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_filament_tpu",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPEBA",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PEBA @Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PEBA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"5"
-	],
-	"activate_air_filtration": [
-		"1"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"60"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"100"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"80"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"100"
-	],
-	"fan_cooling_layer_time_HS": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"100"
-	],
-	"fan_max_speed_HS": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"100"
-	],
-	"fan_min_speed_HS": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"0"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.06"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"40"
-	],
-	"hot_plate_temp_initial_layer": [
-		"40"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"100"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"230"
-	],
-	"nozzle_temperature_HS": [
-		"230"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"230"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"230"
-	],
-	"nozzle_temperature_range_high": [
-		"250"
-	],
-	"nozzle_temperature_range_low": [
-		"220"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.038"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"8"
-	],
-	"slow_down_layer_time_HS": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"30"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"40"
-	],
-	"textured_plate_temp_initial_layer": [
-		"40"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PET-CF @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -1,336 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PET-CF @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_filament_pet",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPET-CF",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PET-CF @Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PET-CF"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"60"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"30"
-	],
-	"fan_max_speed_BRASS": [
-		"30"
-	],
-	"fan_max_speed_HS": [
-		"30"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"500"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.8"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"280"
-	],
-	"nozzle_temperature_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_HS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"280"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"270"
-	],
-	"nozzle_temperature_range_high": [
-		"300"
-	],
-	"nozzle_temperature_range_low": [
-		"260"
-	],
-	"overhang_fan_speed": [
-		"40"
-	],
-	"overhang_fan_threshold": [
-		"0%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.025"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"6"
-	],
-	"slow_down_layer_time_BRASS": [
-		"6"
-	],
-	"slow_down_layer_time_HS": [
-		"6"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"45"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PET-CF @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PET-CF @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_filament_pet",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPET-CF",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PET-CF @Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PET-CF"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"30"
-	],
-	"fan_max_speed_HS": [
-		"30"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_HS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"270"
-	],
-	"nozzle_temperature_range_high": [
-		"300"
-	],
-	"nozzle_temperature_range_low": [
-		"260"
-	],
-	"overhang_fan_speed": [
-		"40"
-	],
-	"overhang_fan_threshold": [
-		"0%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"6"
-	],
-	"slow_down_layer_time_HS": [
-		"6"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"185"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PET-CF @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PET-CF @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_filament_pet",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPET-CF",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PET-CF @Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PET-CF"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"1"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"60"
-	],
-	"close_fan_the_first_x_layers": [
-		"2"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"30"
-	],
-	"fan_max_speed_HS": [
-		"30"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"10"
-	],
-	"fan_min_speed_HS": [
-		"10"
-	],
-	"filament_adhesiveness_category": [
-		"0"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.8"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"80"
-	],
-	"hot_plate_temp_initial_layer": [
-		"80"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_HS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"270"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"270"
-	],
-	"nozzle_temperature_range_high": [
-		"300"
-	],
-	"nozzle_temperature_range_low": [
-		"260"
-	],
-	"overhang_fan_speed": [
-		"40"
-	],
-	"overhang_fan_threshold": [
-		"0%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.025"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"6"
-	],
-	"slow_down_layer_time_HS": [
-		"6"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"55"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"80"
-	],
-	"textured_plate_temp_initial_layer": [
-		"80"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.25 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PETG @Anycubic Kobra S1 Max 0.25 nozzle",
-	"inherits": "fdm_filament_pet",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPETG",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PETG @Anycubic Kobra S1 Max 0.25 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.25 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"1"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"60"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"70"
-	],
-	"cool_plate_temp_initial_layer": [
-		"70"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"80"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"90"
-	],
-	"fan_max_speed_HS": [
-		"90"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"40"
-	],
-	"fan_min_speed_HS": [
-		"40"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"75"
-	],
-	"hot_plate_temp_initial_layer": [
-		"75"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"205"
-	],
-	"nozzle_temperature_BRASS": [
-		"250"
-	],
-	"nozzle_temperature_HS": [
-		"250"
-	],
-	"nozzle_temperature_initial_layer": [
-		"215"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"250"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"250"
-	],
-	"nozzle_temperature_range_high": [
-		"250"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.035"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"12"
-	],
-	"slow_down_layer_time_HS": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"55"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"75"
-	],
-	"textured_plate_temp_initial_layer": [
-		"75"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -1,345 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PETG @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_filament_pet",
-	"from": "system",
-	"setting_id": "Anycubic PETG @Anycubic Kobra S1 Max 0.4 nozzle",
-	"filament_id": "GFPETG",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PETG @Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"1"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"1"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"50"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"0"
-	],
-	"cool_plate_temp": [
-		"70"
-	],
-	"cool_plate_temp_initial_layer": [
-		"70"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"30"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"90"
-	],
-	"fan_max_speed_BRASS": [
-		"85"
-	],
-	"fan_max_speed_HS": [
-		"85"
-	],
-	"fan_min_speed": [
-		"30"
-	],
-	"fan_min_speed_BRASS": [
-		"30"
-	],
-	"fan_min_speed_HS": [
-		"30"
-	],
-	"fan_p2_after_x_layers": [
-		"0"
-	],
-	"fan_p2_before_x_layers": [
-		"0"
-	],
-	"fan_p2_speed_before_x_layers": [
-		"50"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"30"
-	],
-	"filament_density": [
-		"1.27"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode "
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"4"
-	],
-	"hot_plate_temp": [
-		"70"
-	],
-	"hot_plate_temp_initial_layer": [
-		"70"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"235"
-	],
-	"nozzle_temperature_BRASS": [
-		"240"
-	],
-	"nozzle_temperature_HS": [
-		"250"
-	],
-	"nozzle_temperature_initial_layer": [
-		"245"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"240"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"250"
-	],
-	"nozzle_temperature_range_high": [
-		"260"
-	],
-	"nozzle_temperature_range_low": [
-		"220"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.04"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_layer_time_BRASS": [
-		"12"
-	],
-	"slow_down_layer_time_HS": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"70"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"70"
-	],
-	"textured_plate_temp_initial_layer": [
-		"70"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PETG @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_filament_pet",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPETG",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PETG @Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"0"
-	],
-	"cool_plate_temp": [
-		"70"
-	],
-	"cool_plate_temp_initial_layer": [
-		"70"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"0"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"90"
-	],
-	"fan_max_speed_BRASS": [
-		"90"
-	],
-	"fan_max_speed_HS": [
-		"90"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"fan_min_speed_BRASS": [
-		"30"
-	],
-	"fan_min_speed_HS": [
-		"30"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"75"
-	],
-	"hot_plate_temp_initial_layer": [
-		"75"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"230"
-	],
-	"nozzle_temperature_BRASS": [
-		"240"
-	],
-	"nozzle_temperature_HS": [
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"240"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"240"
-	],
-	"nozzle_temperature_range_high": [
-		"260"
-	],
-	"nozzle_temperature_range_low": [
-		"220"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_layer_time_BRASS": [
-		"12"
-	],
-	"slow_down_layer_time_HS": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"69"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"75"
-	],
-	"textured_plate_temp_initial_layer": [
-		"75"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PETG @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_filament_pet",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPETG",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PETG @Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"70"
-	],
-	"cool_plate_temp_initial_layer": [
-		"70"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"90"
-	],
-	"fan_max_speed_HS": [
-		"90"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"30"
-	],
-	"fan_min_speed_HS": [
-		"30"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.27"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"75"
-	],
-	"hot_plate_temp_initial_layer": [
-		"75"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"240"
-	],
-	"nozzle_temperature_HS": [
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"240"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"240"
-	],
-	"nozzle_temperature_range_high": [
-		"260"
-	],
-	"nozzle_temperature_range_low": [
-		"220"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"12"
-	],
-	"slow_down_layer_time_HS": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"70"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"75"
-	],
-	"textured_plate_temp_initial_layer": [
-		"75"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -1,345 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PETG-CF @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_filament_pet",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPETG-CF",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PETG-CF @Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PETG-CF"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"5"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"0"
-	],
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"0"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"fan_max_speed_BRASS": [
-		"60"
-	],
-	"fan_max_speed_HS": [
-		"60"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"fan_min_speed_BRASS": [
-		"30"
-	],
-	"fan_min_speed_HS": [
-		"30"
-	],
-	"fan_p2_after_x_layers": [
-		"2"
-	],
-	"fan_p2_before_x_layers": [
-		"1"
-	],
-	"fan_p2_speed_before_x_layers": [
-		"0"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"0"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"0%"
-	],
-	"filament_retract_lift_above": [
-		"0"
-	],
-	"filament_retract_lift_below": [
-		"349"
-	],
-	"filament_retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"filament_retract_restart_extra": [
-		"0"
-	],
-	"filament_retract_when_changing_layer": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"1"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"filament_z_hop_types": [
-		"Auto Lift"
-	],
-	"full_fan_speed_layer": [
-		"4"
-	],
-	"hot_plate_temp": [
-		"75"
-	],
-	"hot_plate_temp_initial_layer": [
-		"75"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"250"
-	],
-	"nozzle_temperature_BRASS": [
-		"250"
-	],
-	"nozzle_temperature_HS": [
-		"250"
-	],
-	"nozzle_temperature_initial_layer": [
-		"250"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"250"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"250"
-	],
-	"nozzle_temperature_range_high": [
-		"270"
-	],
-	"nozzle_temperature_range_low": [
-		"220"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.04"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"6"
-	],
-	"slow_down_layer_time_BRASS": [
-		"6"
-	],
-	"slow_down_layer_time_HS": [
-		"6"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"70"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"75"
-	],
-	"textured_plate_temp_initial_layer": [
-		"75"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PETG-CF @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_filament_pet",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPETG-CF",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PETG-CF @Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PETG-CF"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"5"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"0"
-	],
-	"cool_plate_temp": [
-		"70"
-	],
-	"cool_plate_temp_initial_layer": [
-		"70"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"0"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"90"
-	],
-	"fan_max_speed_BRASS": [
-		"60"
-	],
-	"fan_max_speed_HS": [
-		"60"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"fan_min_speed_BRASS": [
-		"30"
-	],
-	"fan_min_speed_HS": [
-		"30"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"75"
-	],
-	"hot_plate_temp_initial_layer": [
-		"75"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"230"
-	],
-	"nozzle_temperature_BRASS": [
-		"250"
-	],
-	"nozzle_temperature_HS": [
-		"250"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"250"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"250"
-	],
-	"nozzle_temperature_range_high": [
-		"270"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_layer_time_BRASS": [
-		"6"
-	],
-	"slow_down_layer_time_HS": [
-		"6"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"69"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"75"
-	],
-	"textured_plate_temp_initial_layer": [
-		"75"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PETG-CF @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PETG-CF @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_filament_pet",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPETG-CF",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PETG-CF @Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PETG-CF"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"5"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"70"
-	],
-	"cool_plate_temp_initial_layer": [
-		"70"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"30"
-	],
-	"fan_cooling_layer_time_HS": [
-		"30"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"60"
-	],
-	"fan_max_speed_HS": [
-		"60"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"30"
-	],
-	"fan_min_speed_HS": [
-		"30"
-	],
-	"filament_adhesiveness_category": [
-		"300"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"75"
-	],
-	"hot_plate_temp_initial_layer": [
-		"75"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"250"
-	],
-	"nozzle_temperature_HS": [
-		"250"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"250"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"250"
-	],
-	"nozzle_temperature_range_high": [
-		"270"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"6"
-	],
-	"slow_down_layer_time_HS": [
-		"6"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"55"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"75"
-	],
-	"textured_plate_temp_initial_layer": [
-		"75"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra S1 Max 0.25 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA @Anycubic Kobra S1 Max 0.25 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPLA",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA @Anycubic Kobra S1 Max 0.25 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.25 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"2"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"85"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"80"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"100"
-	],
-	"fan_cooling_layer_time_HS": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"100"
-	],
-	"fan_max_speed_HS": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"100"
-	],
-	"fan_min_speed_HS": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"55"
-	],
-	"hot_plate_temp_initial_layer": [
-		"55"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"205"
-	],
-	"nozzle_temperature_BRASS": [
-		"220"
-	],
-	"nozzle_temperature_HS": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"215"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.035"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"4"
-	],
-	"slow_down_layer_time_HS": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"55"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"55"
-	],
-	"textured_plate_temp_initial_layer": [
-		"55"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "Anycubic PLA @Anycubic Kobra S1 Max 0.4 nozzle",
-	"filament_id": "GFPLA",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA @Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"activate_air_filtration": [
-		"1"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"85"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"0"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"30"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"100"
-	],
-	"fan_cooling_layer_time_HS": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"100"
-	],
-	"fan_max_speed_HS": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"100"
-	],
-	"fan_min_speed_HS": [
-		"100"
-	],
-	"fan_p2_speed_before_x_layers": [
-		"50"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"220"
-	],
-	"nozzle_temperature_HS": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.034"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"8"
-	],
-	"slow_down_layer_time_HS": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"55"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPLA",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA @Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"60"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"100"
-	],
-	"fan_cooling_layer_time_HS": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"100"
-	],
-	"fan_max_speed_HS": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"100"
-	],
-	"fan_min_speed_HS": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"100"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"220"
-	],
-	"nozzle_temperature_HS": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.036"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"8"
-	],
-	"slow_down_layer_time_HS": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"55"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPLA",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA @Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"85"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"100"
-	],
-	"fan_cooling_layer_time_HS": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"100"
-	],
-	"fan_max_speed_HS": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"100"
-	],
-	"fan_min_speed_HS": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"0"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"100"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"220"
-	],
-	"nozzle_temperature_HS": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"12"
-	],
-	"slow_down_layer_time_HS": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"55"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA Glow @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "Anycubic Generic PLA",
-	"from": "system",
-	"setting_id": "Anycubic PLA Glow @Anycubic Kobra S1 Max 0.4 nozzle",
-	"filament_id": "GFPLA Glow",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA Glow @Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"1"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"85"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"0"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"30"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"100"
-	],
-	"fan_cooling_layer_time_HS": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"100"
-	],
-	"fan_max_speed_HS": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"100"
-	],
-	"fan_min_speed_HS": [
-		"100"
-	],
-	"fan_p2_speed_before_x_layers": [
-		"50"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode "
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"55"
-	],
-	"hot_plate_temp_initial_layer": [
-		"55"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"190"
-	],
-	"nozzle_temperature_BRASS": [
-		"220"
-	],
-	"nozzle_temperature_HS": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"210"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"8"
-	],
-	"slow_down_layer_time_HS": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"45"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"55"
-	],
-	"textured_plate_temp_initial_layer": [
-		"55"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA Glow @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "Anycubic Generic PLA",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPLA Glow",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA Glow @Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.97"
-	],
-	"filament_max_volumetric_speed": [
-		"10"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"60"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"100"
-	],
-	"fan_cooling_layer_time_HS": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"100"
-	],
-	"fan_max_speed_HS": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"100"
-	],
-	"fan_min_speed_HS": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"100"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"210"
-	],
-	"nozzle_temperature_HS": [
-		"210"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"8"
-	],
-	"slow_down_layer_time_HS": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"55"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA Glow @Anycubic Kobra S1 Max 0.8 nozzle",
-	"inherits": "Anycubic Generic PLA",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPLA Glow",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA Glow @Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"10"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"60"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"100"
-	],
-	"fan_cooling_layer_time_HS": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"100"
-	],
-	"fan_max_speed_HS": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"100"
-	],
-	"fan_min_speed_HS": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"55"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"100"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"210"
-	],
-	"nozzle_temperature_HS": [
-		"210"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"210"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"210"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"8"
-	],
-	"slow_down_layer_time_HS": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"45"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"55"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -1,339 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.4 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.4 nozzle",
-	"filament_id": "GFPLA High Speed",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"18"
-	],
-	"activate_air_filtration": [
-		"1"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0,0,0\n0,0,0"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"85"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"0"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"30"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"100"
-	],
-	"fan_cooling_layer_time_HS": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"100"
-	],
-	"fan_max_speed_HS": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"100"
-	],
-	"fan_min_speed_HS": [
-		"100"
-	],
-	"fan_p2_speed_before_x_layers": [
-		"50"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"0"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"0%"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"249"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"0"
-	],
-	"filament_retract_when_changing_layer": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.8"
-	],
-	"filament_retraction_minimum_travel": [
-		"1"
-	],
-	"filament_retraction_speed": [
-		"80"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"1"
-	],
-	"filament_wipe_distance": [
-		"2"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"filament_z_hop_types": [
-		"Auto Lift"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"55"
-	],
-	"hot_plate_temp_initial_layer": [
-		"55"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"-1"
-	],
-	"nozzle_temperature": [
-		"230"
-	],
-	"nozzle_temperature_BRASS": [
-		"220"
-	],
-	"nozzle_temperature_HS": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.025"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"4"
-	],
-	"slow_down_layer_time_BRASS": [
-		"4"
-	],
-	"slow_down_layer_time_HS": [
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"45"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"55"
-	],
-	"textured_plate_temp_initial_layer": [
-		"55"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -1,351 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.6 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "GFSA04",
-	"filament_id": "GFPLA High Speed",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA High Speed @Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra S1 Max 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"18"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"adaptive_pressure_advance": [
-		"0"
-	],
-	"adaptive_pressure_advance_bridges": [
-		"0"
-	],
-	"adaptive_pressure_advance_model": [
-		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
-	],
-	"adaptive_pressure_advance_overhangs": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"60"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"5"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"0"
-	],
-	"during_print_exhaust_fan_speed": [
-		"5"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"100"
-	],
-	"fan_cooling_layer_time_HS": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_max_speed_BRASS": [
-		"100"
-	],
-	"fan_max_speed_HS": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"fan_min_speed_BRASS": [
-		"100"
-	],
-	"fan_min_speed_HS": [
-		"100"
-	],
-	"filament_adhesiveness_category": [
-		"100"
-	],
-	"filament_change_length": [
-		"10"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_flush_temp": [
-		"nil"
-	],
-	"filament_flush_volumetric_speed": [
-		"nil"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_prime_volume": [
-		"45"
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_shrinkage_compensation_z": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_stamping_distance": [
-		"0"
-	],
-	"filament_stamping_loading_speed": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"idle_temperature": [
-		"0"
-	],
-	"internal_bridge_fan_speed": [
-		"100"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_BRASS": [
-		"220"
-	],
-	"nozzle_temperature_HS": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_BRASS": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer_HS": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pellet_flow_coefficient": [
-		"0.4157"
-	],
-	"pressure_advance": [
-		"0.025"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"3"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"4"
-	],
-	"slow_down_layer_time_HS": [
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"supertack_plate_temp": [
-		"35"
-	],
-	"supertack_plate_temp_initial_layer": [
-		"35"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"45"
-	],
-	"textured_cool_plate_temp": [
-		"40"
-	],
-	"textured_cool_plate_temp_initial_layer": [
-		"40"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}