Support extended triangle paint states up to 32

Extend TriangleSelector serialization to encode leaf facet paint states up to 32 by adding an escaped second nibble (12-bit path: wwwwzzzzxxyy). Implemented a push_nibble helper and an extended-prefix (0b1110) to signal the extra nibble. Updated deserialize, update_used_states and has_facets to decode the new format while preserving legacy behavior for 3..16. Adjusted asserts and state handling accordingly. Added a unit test and include for TriangleSelector to verify round-trip of paint states above 16.

.github/workflows/build_all.yml

@@ -13,8 +13,6 @@ on:
      - 'localization/**'
      - 'resources/**'
      - ".github/workflows/build_*.yml"
-     - 'signpath/**'
-     - 'scripts/*.ps1'
      - 'scripts/flatpak/**'
 
   pull_request:
@@ -28,11 +26,9 @@ on:
      - '**/CMakeLists.txt'
      - 'version.inc'
      - ".github/workflows/build_*.yml"
-     - 'signpath/**'
      - 'build_linux.sh'
      - 'build_release_vs2022.bat'
      - 'build_release_macos.sh'
-     - 'scripts/*.ps1'
      - 'scripts/flatpak/**'
 
 

.github/workflows/build_orca.yml

@@ -292,53 +292,6 @@ jobs:
         #   WindowsSDKVersion: '10.0.26100.0\'
         run: .\build_release_vs.bat slicer
 
-      - name: Pack PDB
-        if: runner.os == 'Windows' && !vars.SELF_HOSTED
-        working-directory: ${{ github.workspace }}/build/src/Release
-        shell: cmd
-        run: '"C:/Program Files/7-Zip/7z.exe" a -m0=lzma2 -mx9 Debug_PDB_${{ env.ver }}_for_developers_only.7z  *.pdb'
-
-      - name: Upload unsigned Windows portable artifact for SignPath
-        id: upload-windows-portable
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && (github.ref == 'refs/heads/main' || startsWith(github.ref, 'refs/heads/release/')) && runner.os == 'Windows' && !vars.SELF_HOSTED
-        uses: actions/upload-artifact@v7
-        with:
-          name: OrcaSlicer_Windows_${{ env.ver }}_portable_unsigned
-          path: ${{ github.workspace }}/build/OrcaSlicer
-          if-no-files-found: error
-
-      - name: Submit Windows portable artifact to SignPath
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && (github.ref == 'refs/heads/main' || startsWith(github.ref, 'refs/heads/release/')) && runner.os == 'Windows' && !vars.SELF_HOSTED
-        uses: signpath/github-action-submit-signing-request@v2
-        with:
-          api-token: ${{ secrets.SIGNPATH_API_TOKEN }}
-          organization-id: ${{ secrets.SIGNPATH_ORGANIZATION_ID }}
-          project-slug: OrcaSlicer
-          signing-policy-slug: test-signing
-          artifact-configuration-slug: windows-portable-v1
-          github-artifact-id: ${{ steps.upload-windows-portable.outputs.artifact-id }}
-          wait-for-completion: true
-          output-artifact-directory: ${{ github.workspace }}/build/signpath/windows-portable
-
-      - name: Verify SignPath Windows portable signatures
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && (github.ref == 'refs/heads/main' || startsWith(github.ref, 'refs/heads/release/')) && runner.os == 'Windows' && !vars.SELF_HOSTED
-        shell: pwsh
-        # -AllowUntrustedRoot is required while signing with the SignPath test
-        # certificate (self-signed). Remove it once signing-policy-slug switches
-        # to release-signing with a production CA-issued certificate.
-        run: ./scripts/verify-authenticode.ps1 -ArtifactDirectory '${{ github.workspace }}/build/signpath/windows-portable' -AllowUntrustedRoot
-
-      - name: Replace Windows portable bundle with signed output
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && (github.ref == 'refs/heads/main' || startsWith(github.ref, 'refs/heads/release/')) && runner.os == 'Windows' && !vars.SELF_HOSTED
-        shell: pwsh
-        run: |
-          $source = Join-Path "${{ github.workspace }}" "build/signpath/windows-portable"
-          $destination = Join-Path "${{ github.workspace }}" "build/OrcaSlicer"
-          if (-not (Test-Path -LiteralPath $source -PathType Container)) {
-              throw "SignPath output directory not found: $source"
-          }
-          Get-ChildItem -LiteralPath $source -Force | Copy-Item -Destination $destination -Recurse -Force
-
       - name: Create installer Win
         if: runner.os == 'Windows' && !vars.SELF_HOSTED
         working-directory: ${{ github.workspace }}/build
@@ -348,14 +301,14 @@ jobs:
       - name: Pack app
         if: runner.os == 'Windows'
         working-directory: ${{ github.workspace }}/build
-        shell: pwsh
-        run: |
-          $zipPath = "OrcaSlicer_Windows_${{ env.ver }}_portable.zip"
-          Remove-Item -LiteralPath $zipPath -Force -ErrorAction SilentlyContinue
-          & "C:/Program Files/7-Zip/7z.exe" a -tzip $zipPath "${{ github.workspace }}/build/OrcaSlicer"
-          if ($LASTEXITCODE -ne 0) {
-              exit $LASTEXITCODE
-          }
+        shell: cmd
+        run: '"C:/Program Files/7-Zip/7z.exe" a -tzip OrcaSlicer_Windows_${{ env.ver }}_portable.zip ${{ github.workspace }}/build/OrcaSlicer'
+
+      - name: Pack PDB
+        if: runner.os == 'Windows' && !vars.SELF_HOSTED
+        working-directory: ${{ github.workspace }}/build/src/Release
+        shell: cmd
+        run: '"C:/Program Files/7-Zip/7z.exe" a -m0=lzma2 -mx9 Debug_PDB_${{ env.ver }}_for_developers_only.7z  *.pdb'
 
       - name: Upload artifacts Win zip
         if: runner.os == 'Windows'
@@ -363,7 +316,6 @@ jobs:
         with:
           name: OrcaSlicer_Windows_${{ env.ver }}_portable
           path: ${{ github.workspace }}/build/OrcaSlicer
-          if-no-files-found: error
 
       - name: Upload artifacts Win installer
         if: runner.os == 'Windows' && !vars.SELF_HOSTED

deps/Eigen/Eigen.cmake

@@ -1,5 +1,11 @@
+set(_eigen_extra_flags "")
+if (MSVC)
+    set(_eigen_extra_flags "-DCMAKE_CXX_FLAGS:STRING=/bigobj")
+endif ()
+
 orcaslicer_add_cmake_project(Eigen
     URL https://gitlab.com/libeigen/eigen/-/archive/5.0.1/eigen-5.0.1.zip
     URL_HASH SHA256=0dbb1f9e3aaad66f352c03227d8c983f6f0b49e0b07e71a7300f4abcc01aee12
+    CMAKE_ARGS "${_eigen_extra_flags}"
     DEPENDS dep_Boost dep_GMP dep_MPFR
 )

doc/MixedFilament.md

@@ -0,0 +1,171 @@
+# Mixed Filament
+
+Ported from [OrcaSlicer-FullSpectrum](https://github.com/SoftFever/OrcaSlicer-FullSpectrum)
+with contributions from Rad, Justin Hayes, Calogero Guagenti, xSil3nt, and ratdoux.
+
+---
+
+## User Guide
+
+### What It Does
+
+Mixed Filament lets a single virtual filament slot alternate between two
+physical filaments across layers (or within a layer in Pointillisme mode),
+producing blended or gradient-like colours on single-extruder printers.
+
+### Enabling
+
+1. Load a multi-colour (multi-extruder) profile with at least 2 filaments.
+2. The **Mixed Filaments** panel appears automatically in the right-hand sidebar
+   when 2 or more filaments are configured.
+3. Each auto-generated row represents one pair of physical filaments.
+   Toggle a row to enable it; the total filament count grows to include the
+   virtual slot.
+
+### Sidebar Workflow
+
+- **Add** — creates a custom row for the same pair or a different ratio.
+- **Edit** — opens `MixedFilamentConfigPanel` to adjust ratio, pattern,
+  surface offset (bias), and distribution mode.
+- **Delete** — marks the row deleted; existing painted geometry retains its
+  virtual filament ID until you re-slice or repaint.
+
+Painting with a virtual filament ID behaves the same as painting with a
+physical one — use the Multi-Material Painting gizmo and select the virtual
+slot from the colour palette.
+
+### Color Match Dialog
+
+Open via the colour swatch on a mixed row. The dialog (`MixedFilamentColorMatchDialog`)
+shows a live preview strip of the blended result and lets you adjust ratio
+until the preview matches your target colour. The preview accounts for
+surface-offset bias when enabled.
+
+### Anti-Banding Options
+
+| Setting | What it does |
+|---|---|
+| `mixed_filament_advanced_dithering` | Uses an ordered dither pattern instead of simple A-then-B runs. Reduces stripe visibility on some hue pairs. More experimental than the default. |
+| `dithering_local_z_mode` | Splits each blended layer into two sub-layers whose heights are proportional to the mix ratio (e.g. 66/33 at 0.12 mm → 0.08 mm + 0.04 mm). Produces the smoothest colour gradients. |
+| `dithering_local_z_whole_objects` | Extends Local-Z splitting beyond painted masks to cover the entire object cross-section. Useful when mixed walls surround a painted zone. |
+| `dithering_local_z_direct_multicolor` | For rows with 3 or more physical components, allocates Local-Z sub-layers directly across all components with carry-over error correction instead of collapsing to pair cadence. More toolchanges; less banding. |
+
+### Gotchas
+
+- **Single-extruder warning** — Mixed Filament requires a physical toolchange
+  between the two components. On a true single-nozzle printer this means a
+  manual filament swap. Verify your printer profile supports `T0`/`T1` before
+  using mixed slots in a production print.
+- **Variable-layer interaction** — If Variable Layer Height is enabled, Local-Z
+  sub-layer heights are recomputed per interval. The mix ratio is preserved but
+  the absolute sub-layer heights change with the variable height. Review the
+  layer preview after applying variable layers.
+- **Custom sequence disabled** — OrcaSlicer's "custom toolchange sequence" is
+  suppressed when mixed filaments are active (`PlateSettingsDialog`). The
+  virtual-to-physical resolution must control toolchange order; a user-defined
+  sequence would break it.
+- **Stable IDs** — each mixed row carries a `stable_id` (64-bit). If you
+  reorder or delete rows and then load an older project, the ID remap in
+  `PresetBundle::update_mixed_filament_id_remap` translates painted geometry
+  to the correct new virtual slot. Do not rely on the 1-based filament index
+  as a stable identifier.
+
+---
+
+## Developer Guide
+
+### Core Data Structures
+
+```
+src/libslic3r/MixedFilament.hpp   — MixedFilament struct, MixedFilamentManager
+src/libslic3r/MixedFilament.cpp   — serialization, resolve(), auto_generate()
+src/libslic3r/LocalZOrderOptimizer.hpp — bucket-ordering helpers for Local-Z
+```
+
+The key scalar fields on `MixedFilament`:
+
+- `component_a`, `component_b` — 1-based physical filament indices.
+- `ratio_a`, `ratio_b` — layer-alternation cadence numerators.
+- `mix_b_percent` — nominal colour mix (used for Local-Z height computation
+  and the Color Match preview; does not change the cadence).
+- `stable_id` — monotonically increasing 64-bit ID assigned at construction.
+  Never reused. Survives serialization round-trips.
+- `distribution_mode` — selects between `Simple`, `SameLayerPointillisme`,
+  and `GroupedManual`.
+
+### Seam: Adding New Distribution Modes
+
+`MixedFilamentManager::resolve()` in `MixedFilament.cpp` is the single
+dispatch point that maps `(virtual_filament_id, num_physical, layer_index)`
+to a physical extruder. The current switch covers `Simple` and
+`SameLayerPointillisme`. A new mode is added by:
+
+1. Adding a value to the `MixedFilament::DistributionMode` enum in
+   `MixedFilament.hpp`.
+2. Adding a `case` to `MixedFilamentManager::resolve()` in `MixedFilament.cpp`.
+3. Serializing the new mode token in `serialize_custom_entries` /
+   `load_custom_entries` (format is a semicolon-delimited row string; see
+   existing tokens for the convention).
+
+G-code emission (`src/libslic3r/GCode/`) reads only the physical ID returned
+by `resolve()`, so new modes are automatically emitted without further changes.
+
+### Seam: New Toolchange-Cost Heuristics
+
+`LocalZOrderOptimizer` (`src/libslic3r/LocalZOrderOptimizer.hpp`) exposes:
+
+- `order_bucket_extruders(bucket, current, preferred_last)` — reorders a
+  single-layer bucket to minimise toolchanges given the current active extruder.
+- `order_pass_group(group, current_extruder)` — greedy walk across a set of
+  buckets (one per Local-Z sub-layer) to minimise total transitions.
+
+To add a new heuristic (e.g. cost-based look-ahead), replace or wrap
+`order_pass_group`. The caller in `PrintObjectSlice.cpp` passes the result
+directly into the sub-layer plan, so the heuristic is fully decoupled from
+the plan builder.
+
+### Seam: New Picker Shapes in the Color Map Panel
+
+`MixedFilamentColorMapPanel` (`src/slic3r/GUI/MixedFilamentColorMapPanel.hpp`)
+renders a 2-D colour map using a set of geometry "types" (currently strip and
+gradient). Each type is a small self-contained rendering path keyed by an enum
+value. New shapes are added by:
+
+1. Adding an enum value to `MixedFilamentColorMapPanel::GeometryType`.
+2. Implementing the corresponding `Paint*` helper (follow `PaintStrip` as a
+   template).
+3. Wiring the new type into the `switch` in `OnPaint`.
+
+### Persistence (3MF)
+
+The entire mixed-filament state is stored as a single string key
+`mixed_filament_definitions` in the project config block (section `[presets]`
+in the 3MF metadata).
+
+Round-trip path:
+
+```
+MixedFilamentManager::serialize_custom_entries()
+  called by PresetBundle::sync_mixed_filaments_to_config()
+  written by bbs_3mf: store_bbs_3mf → config.set("presets", "mixed_filament_definitions", ...)
+
+load_bbs_3mf → config.get("presets", "mixed_filament_definitions")
+  stored in project_config["mixed_filament_definitions"]
+  read by PresetBundle::sync_mixed_filaments_from_config()
+    → mixed_filaments.auto_generate(colours)
+    → mixed_filaments.load_custom_entries(defs, colours)
+```
+
+Auto-generated rows are *not* written to the definitions string; they are
+rebuilt from the filament colour list. Only `custom == true` rows are stored.
+
+See `tests/fff_print/test_mixed_filament_e2e.cpp` for regression tests
+covering this path.
+
+### ID Remap
+
+When filaments are added, removed, or reordered, virtual IDs shift.
+`PresetBundle::update_mixed_filament_id_remap(old_mixed, old_count, new_count)`
+produces a `remap` vector where `remap[old_virtual_id] = new_virtual_id`.
+Painted triangle mesh face data uses these IDs; the remap is applied in
+`TriangleSelectorMixed` after any filament list change.

localization/i18n/list.txt

@@ -250,3 +250,7 @@ src/slic3r/GUI/RammingChart.cpp
 src/slic3r/GUI/StepMeshDialog.cpp
 src/slic3r/GUI/FilamentPickerDialog.hpp
 src/libslic3r/PresetBundle.cpp
+src/slic3r/GUI/MixedFilamentColorMatchDialog.cpp
+src/slic3r/GUI/MixedFilamentColorMatchDialog.hpp
+src/slic3r/GUI/MixedFilamentConfigPanel.cpp
+src/slic3r/GUI/MixedFilamentConfigPanel.hpp

resources/profiles/Elegoo/machine/ECC/Elegoo Centauri Carbon 0.4 nozzle.json

@@ -48,6 +48,9 @@
 	"extruder_offset": [
 		"0x0"
 	],
+	"retract_length_toolchange": [
+		"0"
+	],
 	"default_bed_type": "4",
 	"auto_toolchange_command": "0",
 	"fan_speedup_time": "0.5",

resources/profiles/SeeMeCNC.json

@@ -0,0 +1,694 @@
+{
+	"name": "SeeMeCNC",
+	"version": "2.4.0.00",
+	"force_update": "1",
+	"description": "SeeMeCNC configurations - Full profile set for Artemis, BOSSdelta, and RostockMAX printers",
+	"machine_model_list": [
+		{
+			"name": "SeeMeCNC Artemis 300",
+			"sub_path": "machine/SeeMeCNC Artemis 300.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 300",
+			"sub_path": "machine/SeeMeCNC BOSSdelta 300.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 500 0505",
+			"sub_path": "machine/SeeMeCNC BOSSdelta 500 0505.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 500 0510",
+			"sub_path": "machine/SeeMeCNC BOSSdelta 500 0510.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 500 0521",
+			"sub_path": "machine/SeeMeCNC BOSSdelta 500 0521.json"
+		},
+		{
+			"name": "SeeMeCNC RostockMAX v3.2",
+			"sub_path": "machine/SeeMeCNC RostockMAX v3.2.json"
+		},
+		{
+			"name": "SeeMeCNC RostockMAX v4",
+			"sub_path": "machine/SeeMeCNC RostockMAX v4.json"
+		}
+	],
+	"process_list": [
+		{
+			"name": "SeeMeCNC process base",
+			"sub_path": "process/SeeMeCNC_process_base.json"
+		},
+		{
+			"name": "0.16mm Fine @SeeMeCNC Artemis 0.4",
+			"sub_path": "process/0.16mm Fine @SeeMeCNC Artemis 0.4.json"
+		},
+		{
+			"name": "0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
+			"sub_path": "process/0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4.json"
+		},
+		{
+			"name": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
+			"sub_path": "process/0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4.json"
+		},
+		{
+			"name": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
+			"sub_path": "process/0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4.json"
+		},
+		{
+			"name": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
+			"sub_path": "process/0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4.json"
+		},
+		{
+			"name": "0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
+			"sub_path": "process/0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4.json"
+		},
+		{
+			"name": "0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
+			"sub_path": "process/0.16mm Fine @SeeMeCNC RostockMAX v4 0.4.json"
+		},
+		{
+			"name": "0.20mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
+			"sub_path": "process/0.20mm Draft @SeeMeCNC RostockMAX v3.2 0.4.json"
+		},
+		{
+			"name": "0.20mm Fine @SeeMeCNC Artemis 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC Artemis 0.5.json"
+		},
+		{
+			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5.json"
+		},
+		{
+			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5.json"
+		},
+		{
+			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5.json"
+		},
+		{
+			"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5.json"
+		},
+		{
+			"name": "0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5.json"
+		},
+		{
+			"name": "0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
+			"sub_path": "process/0.20mm Fine @SeeMeCNC RostockMAX v4 0.5.json"
+		},
+		{
+			"name": "0.20mm Standard @SeeMeCNC Artemis 0.4",
+			"sub_path": "process/0.20mm Standard @SeeMeCNC Artemis 0.4.json"
+		},
+		{
+			"name": "0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
+			"sub_path": "process/0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4.json"
+		},
+		{
+			"name": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
+			"sub_path": "process/0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4.json"
+		},
+		{
+			"name": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
+			"sub_path": "process/0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4.json"
+		},
+		{
+			"name": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
+			"sub_path": "process/0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4.json"
+		},
+		{
+			"name": "0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
+			"sub_path": "process/0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4.json"
+		},
+		{
+			"name": "0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
+			"sub_path": "process/0.20mm Standard @SeeMeCNC RostockMAX v4 0.4.json"
+		},
+		{
+			"name": "0.24mm Draft @SeeMeCNC Artemis 0.4",
+			"sub_path": "process/0.24mm Draft @SeeMeCNC Artemis 0.4.json"
+		},
+		{
+			"name": "0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
+			"sub_path": "process/0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4.json"
+		},
+		{
+			"name": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
+			"sub_path": "process/0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4.json"
+		},
+		{
+			"name": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
+			"sub_path": "process/0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4.json"
+		},
+		{
+			"name": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
+			"sub_path": "process/0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4.json"
+		},
+		{
+			"name": "0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
+			"sub_path": "process/0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4.json"
+		},
+		{
+			"name": "0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
+			"sub_path": "process/0.24mm Draft @SeeMeCNC RostockMAX v4 0.4.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC Artemis 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC Artemis 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5.json"
+		},
+		{
+			"name": "0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
+			"sub_path": "process/0.25mm Standard @SeeMeCNC RostockMAX v4 0.5.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
+			"sub_path": "process/0.28mm Extra Draft @SeeMeCNC Artemis 0.4.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
+			"sub_path": "process/0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
+			"sub_path": "process/0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
+			"sub_path": "process/0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
+			"sub_path": "process/0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
+			"sub_path": "process/0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4.json"
+		},
+		{
+			"name": "0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4",
+			"sub_path": "process/0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC Artemis 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC Artemis 0.7.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7.json"
+		},
+		{
+			"name": "0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
+			"sub_path": "process/0.28mm Fine @SeeMeCNC RostockMAX v4 0.7.json"
+		},
+		{
+			"name": "0.30mm Draft @SeeMeCNC Artemis 0.5",
+			"sub_path": "process/0.30mm Draft @SeeMeCNC Artemis 0.5.json"
+		},
+		{
+			"name": "0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
+			"sub_path": "process/0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5.json"
+		},
+		{
+			"name": "0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
+			"sub_path": "process/0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5.json"
+		},
+		{
+			"name": "0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
+			"sub_path": "process/0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5.json"
+		},
+		{
+			"name": "0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
+			"sub_path": "process/0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5.json"
+		},
+		{
+			"name": "0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
+			"sub_path": "process/0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5.json"
+		},
+		{
+			"name": "0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
+			"sub_path": "process/0.30mm Draft @SeeMeCNC RostockMAX v4 0.5.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC Artemis 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC Artemis 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 300 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 300 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0505 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0505 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0510 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0510 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0521 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0521 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC RostockMAX v3.2 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC RostockMAX v3.2 0.7.json"
+		},
+		{
+			"name": "0.30mm TPU Solid @SeeMeCNC RostockMAX v4 0.7",
+			"sub_path": "process/0.30mm TPU Solid @SeeMeCNC RostockMAX v4 0.7.json"
+		},
+		{
+			"name": "0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
+			"sub_path": "process/0.35mm Extra Draft @SeeMeCNC Artemis 0.5.json"
+		},
+		{
+			"name": "0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
+			"sub_path": "process/0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5.json"
+		},
+		{
+			"name": "0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
+			"sub_path": "process/0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5.json"
+		},
+		{
+			"name": "0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
+			"sub_path": "process/0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5.json"
+		},
+		{
+			"name": "0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
+			"sub_path": "process/0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5.json"
+		},
+		{
+			"name": "0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
+			"sub_path": "process/0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5.json"
+		},
+		{
+			"name": "0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5",
+			"sub_path": "process/0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5.json"
+		},
+		{
+			"name": "0.35mm Standard @SeeMeCNC Artemis 0.7",
+			"sub_path": "process/0.35mm Standard @SeeMeCNC Artemis 0.7.json"
+		},
+		{
+			"name": "0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
+			"sub_path": "process/0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7.json"
+		},
+		{
+			"name": "0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
+			"sub_path": "process/0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7.json"
+		},
+		{
+			"name": "0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
+			"sub_path": "process/0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7.json"
+		},
+		{
+			"name": "0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
+			"sub_path": "process/0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7.json"
+		},
+		{
+			"name": "0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
+			"sub_path": "process/0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7.json"
+		},
+		{
+			"name": "0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
+			"sub_path": "process/0.35mm Standard @SeeMeCNC RostockMAX v4 0.7.json"
+		},
+		{
+			"name": "0.35mm TPU Vase @SeeMeCNC Artemis 0.7",
+			"sub_path": "process/0.35mm TPU Vase @SeeMeCNC Artemis 0.7.json"
+		},
+		{
+			"name": "0.35mm TPU Vase @SeeMeCNC BOSSdelta 300 0.7",
+			"sub_path": "process/0.35mm TPU Vase @SeeMeCNC BOSSdelta 300 0.7.json"
+		},
+		{
+			"name": "0.35mm TPU Vase @SeeMeCNC BOSSdelta 500 0505 0.7",
+			"sub_path": "process/0.35mm TPU Vase @SeeMeCNC BOSSdelta 500 0505 0.7.json"
+		},
+		{
+			"name": "0.35mm TPU Vase @SeeMeCNC BOSSdelta 500 0510 0.7",
+			"sub_path": "process/0.35mm TPU Vase @SeeMeCNC BOSSdelta 500 0510 0.7.json"
+		},
+		{
+			"name": "0.35mm TPU Vase @SeeMeCNC BOSSdelta 500 0521 0.7",
+			"sub_path": "process/0.35mm TPU Vase @SeeMeCNC BOSSdelta 500 0521 0.7.json"
+		},
+		{
+			"name": "0.35mm TPU Vase @SeeMeCNC RostockMAX v3.2 0.7",
+			"sub_path": "process/0.35mm TPU Vase @SeeMeCNC RostockMAX v3.2 0.7.json"
+		},
+		{
+			"name": "0.35mm TPU Vase @SeeMeCNC RostockMAX v4 0.7",
+			"sub_path": "process/0.35mm TPU Vase @SeeMeCNC RostockMAX v4 0.7.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC Artemis 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC Artemis 1.0.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0.json"
+		},
+		{
+			"name": "0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
+			"sub_path": "process/0.40mm Fine @SeeMeCNC RostockMAX v4 1.0.json"
+		},
+		{
+			"name": "0.42mm Draft @SeeMeCNC Artemis 0.7",
+			"sub_path": "process/0.42mm Draft @SeeMeCNC Artemis 0.7.json"
+		},
+		{
+			"name": "0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
+			"sub_path": "process/0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7.json"
+		},
+		{
+			"name": "0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
+			"sub_path": "process/0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7.json"
+		},
+		{
+			"name": "0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
+			"sub_path": "process/0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7.json"
+		},
+		{
+			"name": "0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
+			"sub_path": "process/0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7.json"
+		},
+		{
+			"name": "0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
+			"sub_path": "process/0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7.json"
+		},
+		{
+			"name": "0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
+			"sub_path": "process/0.42mm Draft @SeeMeCNC RostockMAX v4 0.7.json"
+		},
+		{
+			"name": "0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
+			"sub_path": "process/0.49mm Extra Draft @SeeMeCNC Artemis 0.7.json"
+		},
+		{
+			"name": "0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
+			"sub_path": "process/0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7.json"
+		},
+		{
+			"name": "0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
+			"sub_path": "process/0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7.json"
+		},
+		{
+			"name": "0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
+			"sub_path": "process/0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7.json"
+		},
+		{
+			"name": "0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
+			"sub_path": "process/0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7.json"
+		},
+		{
+			"name": "0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
+			"sub_path": "process/0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7.json"
+		},
+		{
+			"name": "0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7",
+			"sub_path": "process/0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7.json"
+		},
+		{
+			"name": "0.50mm Standard @SeeMeCNC Artemis 1.0",
+			"sub_path": "process/0.50mm Standard @SeeMeCNC Artemis 1.0.json"
+		},
+		{
+			"name": "0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
+			"sub_path": "process/0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0.json"
+		},
+		{
+			"name": "0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
+			"sub_path": "process/0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0.json"
+		},
+		{
+			"name": "0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
+			"sub_path": "process/0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0.json"
+		},
+		{
+			"name": "0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
+			"sub_path": "process/0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0.json"
+		},
+		{
+			"name": "0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
+			"sub_path": "process/0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0.json"
+		},
+		{
+			"name": "0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
+			"sub_path": "process/0.50mm Standard @SeeMeCNC RostockMAX v4 1.0.json"
+		},
+		{
+			"name": "0.60mm Draft @SeeMeCNC Artemis 1.0",
+			"sub_path": "process/0.60mm Draft @SeeMeCNC Artemis 1.0.json"
+		},
+		{
+			"name": "0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0",
+			"sub_path": "process/0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0.json"
+		},
+		{
+			"name": "0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
+			"sub_path": "process/0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0.json"
+		},
+		{
+			"name": "0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
+			"sub_path": "process/0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0.json"
+		},
+		{
+			"name": "0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
+			"sub_path": "process/0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0.json"
+		},
+		{
+			"name": "0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0",
+			"sub_path": "process/0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0.json"
+		},
+		{
+			"name": "0.60mm Draft @SeeMeCNC RostockMAX v4 1.0",
+			"sub_path": "process/0.60mm Draft @SeeMeCNC RostockMAX v4 1.0.json"
+		},
+		{
+			"name": "0.70mm Extra Draft @SeeMeCNC Artemis 1.0",
+			"sub_path": "process/0.70mm Extra Draft @SeeMeCNC Artemis 1.0.json"
+		},
+		{
+			"name": "0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0",
+			"sub_path": "process/0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0.json"
+		},
+		{
+			"name": "0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
+			"sub_path": "process/0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0.json"
+		},
+		{
+			"name": "0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
+			"sub_path": "process/0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0.json"
+		},
+		{
+			"name": "0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
+			"sub_path": "process/0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0.json"
+		},
+		{
+			"name": "0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0",
+			"sub_path": "process/0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0.json"
+		},
+		{
+			"name": "0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0",
+			"sub_path": "process/0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0.json"
+		}
+	],
+	"filament_list": [
+		{
+			"name": "SeeMeCNC filament base",
+			"sub_path": "filament/SeeMeCNC_filament_base.json"
+		},
+		{
+			"name": "SeeMeCNC ABS",
+			"sub_path": "filament/SeeMeCNC_ABS.json"
+		},
+		{
+			"name": "SeeMeCNC PA-CF",
+			"sub_path": "filament/SeeMeCNC_PA-CF.json"
+		},
+		{
+			"name": "SeeMeCNC PETG",
+			"sub_path": "filament/SeeMeCNC_PETG.json"
+		},
+		{
+			"name": "SeeMeCNC PETG-CF",
+			"sub_path": "filament/SeeMeCNC_PETG-CF.json"
+		},
+		{
+			"name": "SeeMeCNC TPU",
+			"sub_path": "filament/SeeMeCNC_TPU.json"
+		},
+		{
+			"name": "SeeMeCNC PLA",
+			"sub_path": "filament/SeeMeCNC_PLA.json"
+		}
+	],
+	"machine_list": [
+		{
+			"name": "SeeMeCNC Artemis 0.4 nozzle",
+			"sub_path": "machine/SeeMeCNC_Artemis_0_4mm.json"
+		},
+		{
+			"name": "SeeMeCNC Artemis 0.5 nozzle",
+			"sub_path": "machine/SeeMeCNC_Artemis_0_5mm.json"
+		},
+		{
+			"name": "SeeMeCNC Artemis 0.7 nozzle",
+			"sub_path": "machine/SeeMeCNC_Artemis_0_7mm.json"
+		},
+		{
+			"name": "SeeMeCNC Artemis 1.0 nozzle",
+			"sub_path": "machine/SeeMeCNC_Artemis_1_0mm.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 300 0.4 nozzle",
+			"sub_path": "machine/SeeMeCNC_BOSSdelta_300_0_4mm.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 300 0.5 nozzle",
+			"sub_path": "machine/SeeMeCNC_BOSSdelta_300_0_5mm.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 300 0.7 nozzle",
+			"sub_path": "machine/SeeMeCNC_BOSSdelta_300_0_7mm.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 300 1.0 nozzle",
+			"sub_path": "machine/SeeMeCNC_BOSSdelta_300_1_0mm.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
+			"sub_path": "machine/SeeMeCNC_BOSSdelta500_0505_0_4mm.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
+			"sub_path": "machine/SeeMeCNC_BOSSdelta500_0505_0_5mm.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
+			"sub_path": "machine/SeeMeCNC_BOSSdelta500_0505_0_7mm.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
+			"sub_path": "machine/SeeMeCNC_BOSSdelta500_0505_1_0mm.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
+			"sub_path": "machine/SeeMeCNC_BOSSdelta500_0510_0_4mm.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
+			"sub_path": "machine/SeeMeCNC_BOSSdelta500_0510_0_5mm.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
+			"sub_path": "machine/SeeMeCNC_BOSSdelta500_0510_0_7mm.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
+			"sub_path": "machine/SeeMeCNC_BOSSdelta500_0510_1_0mm.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
+			"sub_path": "machine/SeeMeCNC_BOSSdelta500_0521_0_4mm.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
+			"sub_path": "machine/SeeMeCNC_BOSSdelta500_0521_0_5mm.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
+			"sub_path": "machine/SeeMeCNC_BOSSdelta500_0521_0_7mm.json"
+		},
+		{
+			"name": "SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
+			"sub_path": "machine/SeeMeCNC_BOSSdelta500_0521_1_0mm.json"
+		},
+		{
+			"name": "SeeMeCNC RostockMAX v3.2 0.4 nozzle",
+			"sub_path": "machine/SeeMeCNC_RostockMAX_v3.2_0_4mm.json"
+		},
+		{
+			"name": "SeeMeCNC RostockMAX v3.2 0.5 nozzle",
+			"sub_path": "machine/SeeMeCNC_RostockMAX_v3.2_0_5mm.json"
+		},
+		{
+			"name": "SeeMeCNC RostockMAX v3.2 0.7 nozzle",
+			"sub_path": "machine/SeeMeCNC_RostockMAX_v3.2_0_7mm.json"
+		},
+		{
+			"name": "SeeMeCNC RostockMAX v3.2 1.0 nozzle",
+			"sub_path": "machine/SeeMeCNC_RostockMAX_v3.2_1_0mm.json"
+		},
+		{
+			"name": "SeeMeCNC RostockMAX v4 0.4 nozzle",
+			"sub_path": "machine/SeeMeCNC_RostockMAX_v4_0_4mm.json"
+		},
+		{
+			"name": "SeeMeCNC RostockMAX v4 0.5 nozzle",
+			"sub_path": "machine/SeeMeCNC_RostockMAX_v4_0_5mm.json"
+		},
+		{
+			"name": "SeeMeCNC RostockMAX v4 0.7 nozzle",
+			"sub_path": "machine/SeeMeCNC_RostockMAX_v4_0_7mm.json"
+		},
+		{
+			"name": "SeeMeCNC RostockMAX v4 1.0 nozzle",
+			"sub_path": "machine/SeeMeCNC_RostockMAX_v4_1_0mm.json"
+		}
+	]
+}

resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS.json

@@ -0,0 +1,265 @@
+{
+	"type": "filament",
+	"name": "SeeMeCNC ABS",
+	"inherits": "SeeMeCNC filament base",
+	"from": "System",
+	"filament_id": "SMCFB001",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"SeeMeCNC ABS"
+	],
+	"compatible_printers": [
+		"SeeMeCNC Artemis 0.4 nozzle",
+		"SeeMeCNC Artemis 0.5 nozzle",
+		"SeeMeCNC Artemis 0.7 nozzle",
+		"SeeMeCNC Artemis 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 300 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 300 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 300 1.0 nozzle",
+		"SeeMeCNC RostockMAX v3.2 0.4 nozzle",
+		"SeeMeCNC RostockMAX v3.2 0.5 nozzle",
+		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
+		"SeeMeCNC RostockMAX v3.2 1.0 nozzle",
+		"SeeMeCNC RostockMAX v4 0.4 nozzle",
+		"SeeMeCNC RostockMAX v4 0.5 nozzle",
+		"SeeMeCNC RostockMAX v4 0.7 nozzle",
+		"SeeMeCNC RostockMAX v4 1.0 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [
+		"0.16mm Fine @SeeMeCNC Artemis 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
+		"0.20mm Fine @SeeMeCNC Artemis 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
+		"0.20mm Standard @SeeMeCNC Artemis 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
+		"0.24mm Draft @SeeMeCNC Artemis 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
+		"0.25mm Standard @SeeMeCNC Artemis 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
+		"0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4",
+		"0.28mm Fine @SeeMeCNC Artemis 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
+		"0.30mm Draft @SeeMeCNC Artemis 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
+		"0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5",
+		"0.35mm Standard @SeeMeCNC Artemis 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
+		"0.40mm Fine @SeeMeCNC Artemis 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
+		"0.42mm Draft @SeeMeCNC Artemis 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
+		"0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7",
+		"0.50mm Standard @SeeMeCNC Artemis 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
+		"0.60mm Draft @SeeMeCNC Artemis 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.60mm Draft @SeeMeCNC RostockMAX v4 1.0",
+		"0.70mm Extra Draft @SeeMeCNC Artemis 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0"
+	],
+	"compatible_prints_condition": "",
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"cool_plate_temp": [
+		"100"
+	],
+	"cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"100"
+	],
+	"eng_plate_temp_initial_layer": [
+		"100"
+	],
+	"fan_cooling_layer_time": [
+		"40"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"0"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"filament_notes": [
+		"Pressure Advance starting values by machine and nozzle size:\nArtemis / BOSSdelta 300:\n  0.4mm nozzle: 0.4000\n  0.5mm nozzle: 0.3200\n  0.7mm nozzle: 0.2286\n  1.0mm nozzle: 0.1600\n\nRostockMAX v3.2 / v4:\n  0.4mm nozzle: 0.4789\n  0.5mm nozzle: 0.3831\n  0.7mm nozzle: 0.2736\n  1.0mm nozzle: 0.1915\n\nBOSSdelta 0505:\n  0.4mm nozzle: 0.5352\n  0.5mm nozzle: 0.4282\n  0.7mm nozzle: 0.3058\n  1.0mm nozzle: 0.2141\n\nBOSSdelta 0510:\n  0.4mm nozzle: 0.7887\n  0.5mm nozzle: 0.6310\n  0.7mm nozzle: 0.4507\n  1.0mm nozzle: 0.3155\n\nBOSSdelta 0521:\n  0.4mm nozzle: 1.3239\n  0.5mm nozzle: 1.0592\n  0.7mm nozzle: 0.7565\n  1.0mm nozzle: 0.5296\n\nRun OrcaSlicer PA calibration to fine-tune for your setup.\n\nABS prints best with an enclosure to prevent warping.\nBed surface: PEI or garolite recommended.\nBed temp: 100C. Avoid drafts."
+	],
+	"filament_type": [
+		"ABS"
+	],
+	"full_fan_speed_layer": [
+		"5"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"internal_bridge_fan_speed": [
+		"30"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.4"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"30"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"100"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"100"
+	],
+	"temperature_vitrification": [
+		"98"
+	],
+	"textured_cool_plate_temp": [
+		"100"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"100"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	],
+	"keep_fan_always_on": [
+		"0"
+	]
+}

resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA-CF.json

@@ -0,0 +1,268 @@
+{
+	"type": "filament",
+	"name": "SeeMeCNC PA-CF",
+	"inherits": "SeeMeCNC filament base",
+	"from": "System",
+	"filament_id": "SMCFN001",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"SeeMeCNC PA-CF"
+	],
+	"compatible_printers": [
+		"SeeMeCNC Artemis 0.4 nozzle",
+		"SeeMeCNC Artemis 0.5 nozzle",
+		"SeeMeCNC Artemis 0.7 nozzle",
+		"SeeMeCNC Artemis 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 300 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 300 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 300 1.0 nozzle",
+		"SeeMeCNC RostockMAX v3.2 0.4 nozzle",
+		"SeeMeCNC RostockMAX v3.2 0.5 nozzle",
+		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
+		"SeeMeCNC RostockMAX v3.2 1.0 nozzle",
+		"SeeMeCNC RostockMAX v4 0.4 nozzle",
+		"SeeMeCNC RostockMAX v4 0.5 nozzle",
+		"SeeMeCNC RostockMAX v4 0.7 nozzle",
+		"SeeMeCNC RostockMAX v4 1.0 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [
+		"0.16mm Fine @SeeMeCNC Artemis 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
+		"0.20mm Fine @SeeMeCNC Artemis 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
+		"0.20mm Standard @SeeMeCNC Artemis 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
+		"0.24mm Draft @SeeMeCNC Artemis 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
+		"0.25mm Standard @SeeMeCNC Artemis 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
+		"0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4",
+		"0.28mm Fine @SeeMeCNC Artemis 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
+		"0.30mm Draft @SeeMeCNC Artemis 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
+		"0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5",
+		"0.35mm Standard @SeeMeCNC Artemis 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
+		"0.40mm Fine @SeeMeCNC Artemis 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
+		"0.42mm Draft @SeeMeCNC Artemis 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
+		"0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7",
+		"0.50mm Standard @SeeMeCNC Artemis 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
+		"0.60mm Draft @SeeMeCNC Artemis 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.60mm Draft @SeeMeCNC RostockMAX v4 1.0",
+		"0.70mm Extra Draft @SeeMeCNC Artemis 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0"
+	],
+	"compatible_prints_condition": "",
+	"close_fan_the_first_x_layers": [
+		"6"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"90"
+	],
+	"eng_plate_temp_initial_layer": [
+		"90"
+	],
+	"fan_cooling_layer_time": [
+		"60"
+	],
+	"fan_max_speed": [
+		"35"
+	],
+	"fan_min_speed": [
+		"35"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.15"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_notes": [
+		"Pressure Advance starting values by machine and nozzle size:\n\nArtemis / BOSSdelta 300:\n  0.4mm nozzle: 0.5500\n  0.5mm nozzle: 0.4400\n  0.7mm nozzle: 0.3143\n  1.0mm nozzle: 0.2200\n\nRostockMAX v3.2 / v4:\n  0.4mm nozzle: 0.6585\n  0.5mm nozzle: 0.5268\n  0.7mm nozzle: 0.3763\n  1.0mm nozzle: 0.2634\n\nBOSSdelta 0505:\n  0.4mm nozzle: 0.7359\n  0.5mm nozzle: 0.5887\n  0.7mm nozzle: 0.4205\n  1.0mm nozzle: 0.2944\n\nBOSSdelta 0510:\n  0.4mm nozzle: 1.0845\n  0.5mm nozzle: 0.8676\n  0.7mm nozzle: 0.6197\n  1.0mm nozzle: 0.4338\n\nBOSSdelta 0521:\n  0.4mm nozzle: 1.8204\n  0.5mm nozzle: 1.4563\n  0.7mm nozzle: 1.0402\n  1.0mm nozzle: 0.7282\n\nRun OrcaSlicer PA calibration to fine-tune for your setup."
+	],
+	"filament_type": [
+		"PA-CF"
+	],
+	"full_fan_speed_layer": [
+		"5"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"internal_bridge_fan_speed": [
+		"35"
+	],
+	"nozzle_temperature": [
+		"265"
+	],
+	"nozzle_temperature_initial_layer": [
+		"265"
+	],
+	"nozzle_temperature_range_high": [
+		"285"
+	],
+	"nozzle_temperature_range_low": [
+		"255"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.55"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"slow_down_for_layer_cooling": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"45"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"temperature_vitrification": [
+		"180"
+	],
+	"textured_cool_plate_temp": [
+		"80"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"80"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	],
+	"overhang_fan_speed": [
+		"50"
+	],
+	"keep_fan_always_on": [
+		"0"
+	]
+}

resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG-CF.json

@@ -0,0 +1,265 @@
+{
+	"type": "filament",
+	"name": "SeeMeCNC PETG-CF",
+	"inherits": "SeeMeCNC filament base",
+	"from": "System",
+	"filament_id": "SMCFG002",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"SeeMeCNC PETG-CF"
+	],
+	"compatible_printers": [
+		"SeeMeCNC Artemis 0.4 nozzle",
+		"SeeMeCNC Artemis 0.5 nozzle",
+		"SeeMeCNC Artemis 0.7 nozzle",
+		"SeeMeCNC Artemis 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 300 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 300 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 300 1.0 nozzle",
+		"SeeMeCNC RostockMAX v3.2 0.4 nozzle",
+		"SeeMeCNC RostockMAX v3.2 0.5 nozzle",
+		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
+		"SeeMeCNC RostockMAX v3.2 1.0 nozzle",
+		"SeeMeCNC RostockMAX v4 0.4 nozzle",
+		"SeeMeCNC RostockMAX v4 0.5 nozzle",
+		"SeeMeCNC RostockMAX v4 0.7 nozzle",
+		"SeeMeCNC RostockMAX v4 1.0 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [
+		"0.16mm Fine @SeeMeCNC Artemis 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
+		"0.20mm Fine @SeeMeCNC Artemis 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
+		"0.20mm Standard @SeeMeCNC Artemis 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
+		"0.24mm Draft @SeeMeCNC Artemis 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
+		"0.25mm Standard @SeeMeCNC Artemis 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
+		"0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4",
+		"0.28mm Fine @SeeMeCNC Artemis 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
+		"0.30mm Draft @SeeMeCNC Artemis 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
+		"0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5",
+		"0.35mm Standard @SeeMeCNC Artemis 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
+		"0.40mm Fine @SeeMeCNC Artemis 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
+		"0.42mm Draft @SeeMeCNC Artemis 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
+		"0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7",
+		"0.50mm Standard @SeeMeCNC Artemis 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
+		"0.60mm Draft @SeeMeCNC Artemis 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.60mm Draft @SeeMeCNC RostockMAX v4 1.0",
+		"0.70mm Extra Draft @SeeMeCNC Artemis 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0"
+	],
+	"compatible_prints_condition": "",
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"60"
+	],
+	"fan_max_speed": [
+		"50"
+	],
+	"fan_min_speed": [
+		"35"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.32"
+	],
+	"filament_max_volumetric_speed": [
+		"7"
+	],
+	"filament_notes": [
+		"Pressure Advance starting values by machine and nozzle size:\nArtemis / BOSSdelta 300:\n  0.4mm nozzle: 0.4500\n  0.5mm nozzle: 0.3600\n  0.7mm nozzle: 0.2571\n  1.0mm nozzle: 0.1800\n\nRostockMAX v3.2 / v4:\n  0.4mm nozzle: 0.5387\n  0.5mm nozzle: 0.4310\n  0.7mm nozzle: 0.3078\n  1.0mm nozzle: 0.2155\n\nBOSSdelta 0505:\n  0.4mm nozzle: 0.6021\n  0.5mm nozzle: 0.4817\n  0.7mm nozzle: 0.3441\n  1.0mm nozzle: 0.2408\n\nBOSSdelta 0510:\n  0.4mm nozzle: 0.8873\n  0.5mm nozzle: 0.7099\n  0.7mm nozzle: 0.5070\n  1.0mm nozzle: 0.3549\n\nBOSSdelta 0521:\n  0.4mm nozzle: 1.4894\n  0.5mm nozzle: 1.1915\n  0.7mm nozzle: 0.8511\n  1.0mm nozzle: 0.5958\n\nRun OrcaSlicer PA calibration to fine-tune for your setup."
+	],
+	"filament_type": [
+		"PETG-CF"
+	],
+	"full_fan_speed_layer": [
+		"5"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"internal_bridge_fan_speed": [
+		"55"
+	],
+	"nozzle_temperature": [
+		"235"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"255"
+	],
+	"nozzle_temperature_range_low": [
+		"225"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.45"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"45"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"70"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"70"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_cool_plate_temp": [
+		"70"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"keep_fan_always_on": [
+		"0"
+	]
+}

resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG.json

@@ -0,0 +1,265 @@
+{
+	"type": "filament",
+	"name": "SeeMeCNC PETG",
+	"inherits": "SeeMeCNC filament base",
+	"from": "System",
+	"filament_id": "SMCFG001",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"SeeMeCNC PETG"
+	],
+	"compatible_printers": [
+		"SeeMeCNC Artemis 0.4 nozzle",
+		"SeeMeCNC Artemis 0.5 nozzle",
+		"SeeMeCNC Artemis 0.7 nozzle",
+		"SeeMeCNC Artemis 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 300 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 300 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 300 1.0 nozzle",
+		"SeeMeCNC RostockMAX v3.2 0.4 nozzle",
+		"SeeMeCNC RostockMAX v3.2 0.5 nozzle",
+		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
+		"SeeMeCNC RostockMAX v3.2 1.0 nozzle",
+		"SeeMeCNC RostockMAX v4 0.4 nozzle",
+		"SeeMeCNC RostockMAX v4 0.5 nozzle",
+		"SeeMeCNC RostockMAX v4 0.7 nozzle",
+		"SeeMeCNC RostockMAX v4 1.0 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [
+		"0.16mm Fine @SeeMeCNC Artemis 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
+		"0.20mm Fine @SeeMeCNC Artemis 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
+		"0.20mm Standard @SeeMeCNC Artemis 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
+		"0.24mm Draft @SeeMeCNC Artemis 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
+		"0.25mm Standard @SeeMeCNC Artemis 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
+		"0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4",
+		"0.28mm Fine @SeeMeCNC Artemis 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
+		"0.30mm Draft @SeeMeCNC Artemis 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
+		"0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5",
+		"0.35mm Standard @SeeMeCNC Artemis 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
+		"0.40mm Fine @SeeMeCNC Artemis 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
+		"0.42mm Draft @SeeMeCNC Artemis 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
+		"0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7",
+		"0.50mm Standard @SeeMeCNC Artemis 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
+		"0.60mm Draft @SeeMeCNC Artemis 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.60mm Draft @SeeMeCNC RostockMAX v4 1.0",
+		"0.70mm Extra Draft @SeeMeCNC Artemis 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0"
+	],
+	"compatible_prints_condition": "",
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"70"
+	],
+	"cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"70"
+	],
+	"eng_plate_temp_initial_layer": [
+		"70"
+	],
+	"fan_cooling_layer_time": [
+		"45"
+	],
+	"fan_max_speed": [
+		"70"
+	],
+	"fan_min_speed": [
+		"40"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.27"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"filament_notes": [
+		"Pressure Advance starting values by machine and nozzle size:\nArtemis / BOSSdelta 300:\n  0.4mm nozzle: 0.5000\n  0.5mm nozzle: 0.4000\n  0.7mm nozzle: 0.2857\n  1.0mm nozzle: 0.2000\n\nRostockMAX v3.2 / v4:\n  0.4mm nozzle: 0.5986\n  0.5mm nozzle: 0.4789\n  0.7mm nozzle: 0.3421\n  1.0mm nozzle: 0.2394\n\nBOSSdelta 0505:\n  0.4mm nozzle: 0.6690\n  0.5mm nozzle: 0.5352\n  0.7mm nozzle: 0.3823\n  1.0mm nozzle: 0.2676\n\nBOSSdelta 0510:\n  0.4mm nozzle: 0.9859\n  0.5mm nozzle: 0.7887\n  0.7mm nozzle: 0.5634\n  1.0mm nozzle: 0.3944\n\nBOSSdelta 0521:\n  0.4mm nozzle: 1.6549\n  0.5mm nozzle: 1.3239\n  0.7mm nozzle: 0.9457\n  1.0mm nozzle: 0.6620\n\nRun OrcaSlicer PA calibration to fine-tune for your setup."
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"full_fan_speed_layer": [
+		"5"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"internal_bridge_fan_speed": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"250"
+	],
+	"nozzle_temperature_range_low": [
+		"220"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.5"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"30"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"70"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"70"
+	],
+	"temperature_vitrification": [
+		"80"
+	],
+	"textured_cool_plate_temp": [
+		"70"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"70"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	],
+	"keep_fan_always_on": [
+		"1"
+	]
+}

resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA.json

@@ -0,0 +1,447 @@
+{
+	"type": "filament",
+	"name": "SeeMeCNC PLA",
+	"from": "System",
+	"filament_id": "SMCFL001",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"SeeMeCNC PLA"
+	],
+	"compatible_printers": [
+		"SeeMeCNC Artemis 0.4 nozzle",
+		"SeeMeCNC Artemis 0.5 nozzle",
+		"SeeMeCNC Artemis 0.7 nozzle",
+		"SeeMeCNC Artemis 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
+		"SeeMeCNC BOSSdelta 300 0.4 nozzle",
+		"SeeMeCNC BOSSdelta 300 0.5 nozzle",
+		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 300 1.0 nozzle",
+		"SeeMeCNC RostockMAX v3.2 0.4 nozzle",
+		"SeeMeCNC RostockMAX v3.2 0.5 nozzle",
+		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
+		"SeeMeCNC RostockMAX v3.2 1.0 nozzle",
+		"SeeMeCNC RostockMAX v4 0.4 nozzle",
+		"SeeMeCNC RostockMAX v4 0.5 nozzle",
+		"SeeMeCNC RostockMAX v4 0.7 nozzle",
+		"SeeMeCNC RostockMAX v4 1.0 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [
+		"0.16mm Fine @SeeMeCNC Artemis 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
+		"0.20mm Fine @SeeMeCNC Artemis 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
+		"0.20mm Standard @SeeMeCNC Artemis 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
+		"0.24mm Draft @SeeMeCNC Artemis 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
+		"0.25mm Standard @SeeMeCNC Artemis 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
+		"0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
+		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
+		"0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
+		"0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4",
+		"0.28mm Fine @SeeMeCNC Artemis 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
+		"0.30mm Draft @SeeMeCNC Artemis 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
+		"0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
+		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
+		"0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
+		"0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5",
+		"0.35mm Standard @SeeMeCNC Artemis 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
+		"0.40mm Fine @SeeMeCNC Artemis 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
+		"0.42mm Draft @SeeMeCNC Artemis 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
+		"0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7",
+		"0.50mm Standard @SeeMeCNC Artemis 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
+		"0.60mm Draft @SeeMeCNC Artemis 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.60mm Draft @SeeMeCNC RostockMAX v4 1.0",
+		"0.70mm Extra Draft @SeeMeCNC Artemis 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
+		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
+		"0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0",
+		"0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0"
+	],
+	"compatible_prints_condition": "",
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"cool_plate_temp": [
+		"60"
+	],
+	"cool_plate_temp_initial_layer": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"fan_cooling_layer_time": [
+		"45"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_notes": [
+		"Pressure Advance starting values by machine and nozzle size:\nArtemis / BOSSdelta 300:\n  0.4mm nozzle: 0.4000\n  0.5mm nozzle: 0.3200\n  0.7mm nozzle: 0.2286\n  1.0mm nozzle: 0.1600\n\nRostockMAX v3.2 / v4:\n  0.4mm nozzle: 0.4789\n  0.5mm nozzle: 0.3831\n  0.7mm nozzle: 0.2736\n  1.0mm nozzle: 0.1915\n\nBOSSdelta 0505:\n  0.4mm nozzle: 0.5352\n  0.5mm nozzle: 0.4282\n  0.7mm nozzle: 0.3058\n  1.0mm nozzle: 0.2141\n\nBOSSdelta 0510:\n  0.4mm nozzle: 0.7887\n  0.5mm nozzle: 0.6310\n  0.7mm nozzle: 0.4507\n  1.0mm nozzle: 0.3155\n\nBOSSdelta 0521:\n  0.4mm nozzle: 1.3239\n  0.5mm nozzle: 1.0592\n  0.7mm nozzle: 0.7565\n  1.0mm nozzle: 0.5296\n\nRun OrcaSlicer PA calibration to fine-tune for your setup."
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"55"
+	],
+	"hot_plate_temp_initial_layer": [
+		"55"
+	],
+	"internal_bridge_fan_speed": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"190"
+	],
+	"nozzle_temperature_initial_layer": [
+		"190"
+	],
+	"nozzle_temperature_range_high": [
+		"225"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.4"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"30"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"55"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"55"
+	],
+	"textured_plate_temp": [
+		"55"
+	],
+	"textured_plate_temp_initial_layer": [
+		"55"
+	],
+	"keep_fan_always_on": [
+		"1"
+	],
+	"shrink_ratio": [
+		"1",
+		"1"
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_adaptive_volumetric_speed": [
+		"0"
+	],
+	"filament_adhesiveness_category": [
+		"0"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		" "
+	],
+	"filament_extruder_variant": [
+		"Bowden Standard"
+	],
+	"filament_flush_temp": [
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0"
+	],
+	"filament_ironing_flow": [
+		"nil"
+	],
+	"filament_ironing_inset": [
+		"nil"
+	],
+	"filament_ironing_spacing": [
+		"nil"
+	],
+	"filament_ironing_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"20"
+	],
+	"filament_loading_speed_start": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_printable": [
+		"3"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		" "
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_toolchange_time": "4",
+	"filament_tower_interface_pre_extrusion_dist": [
+		"10"
+	],
+	"filament_tower_interface_pre_extrusion_length": [
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"-1"
+	],
+	"filament_tower_interface_purge_volume": [
+		"20"
+	],
+	"filament_tower_ironing_area": [
+		"4"
+	],
+	"filament_unloading_speed": [
+		"60"
+	],
+	"filament_unloading_speed_start": [
+		"80"
+	],
+	"filament_vendor": [
+		"SeeMeCNC"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"ironing_fan_speed": [
+		"-1"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"volumetric_speed_coefficients": [
+		""
+	],
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/filament/SeeMeCNC_TPU.json

@@ -0,0 +1,185 @@
+{
+	"type": "filament",
+	"name": "SeeMeCNC TPU",
+	"inherits": "SeeMeCNC filament base",
+	"from": "System",
+	"filament_id": "SMCFU001",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"SeeMeCNC TPU"
+	],
+	"compatible_printers": [
+		"SeeMeCNC Artemis 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
+		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
+		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
+		"SeeMeCNC RostockMAX v4 0.7 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [
+		"0.30mm TPU Solid @SeeMeCNC Artemis 0.7",
+		"0.30mm TPU Solid @SeeMeCNC BOSSdelta 300 0.7",
+		"0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.30mm TPU Solid @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.30mm TPU Solid @SeeMeCNC RostockMAX v4 0.7",
+		"0.35mm TPU Vase @SeeMeCNC Artemis 0.7",
+		"0.35mm TPU Vase @SeeMeCNC BOSSdelta 300 0.7",
+		"0.35mm TPU Vase @SeeMeCNC BOSSdelta 500 0505 0.7",
+		"0.35mm TPU Vase @SeeMeCNC BOSSdelta 500 0510 0.7",
+		"0.35mm TPU Vase @SeeMeCNC BOSSdelta 500 0521 0.7",
+		"0.35mm TPU Vase @SeeMeCNC RostockMAX v3.2 0.7",
+		"0.35mm TPU Vase @SeeMeCNC RostockMAX v4 0.7"
+	],
+	"compatible_prints_condition": "",
+	"close_fan_the_first_x_layers": [
+		"999"
+	],
+	"cool_plate_temp": [
+		"60"
+	],
+	"cool_plate_temp_initial_layer": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"60"
+	],
+	"eng_plate_temp_initial_layer": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"35"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"35"
+	],
+	"filament_cost": [
+		"35"
+	],
+	"filament_density": [
+		"1.22"
+	],
+	"filament_max_volumetric_speed": [
+		"4"
+	],
+	"filament_notes": [
+		"Pressure Advance starting values by machine and nozzle size:\nArtemis / BOSSdelta 300:\n  0.7mm nozzle: 0.4571\n\nRostockMAX v3.2 / v4:\n  0.7mm nozzle: 0.5473\n\nBOSSdelta 0505:\n  0.7mm nozzle: 0.6117\n  -  Expect significant tuning required\n\nBOSSdelta 0510:\n  Not recommended for TPU.\n\nBOSSdelta 0521:\n  Not recommended for TPU.\n\nRun OrcaSlicer PA calibration to fine-tune for your setup.\n\nNote: TPU profiles are designed for 0.7mm nozzles only."
+	],
+	"filament_type": [
+		"TPU"
+	],
+	"full_fan_speed_layer": [
+		"999"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature": [
+		"200"
+	],
+	"nozzle_temperature_initial_layer": [
+		"200"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.8"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"25"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"60"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	],
+	"filament_retraction_length": [
+		"20"
+	],
+	"filament_retraction_speed": [
+		"120"
+	],
+	"filament_deretraction_speed": [
+		"120"
+	],
+	"filament_retraction_minimum_travel": [
+		"15"
+	],
+	"filament_retract_restart_extra": [
+		"0.5"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_when_changing_layer": [
+		"0"
+	],
+	"filament_z_hop": [
+		"0"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift"
+	],
+	"filament_retract_lift_above": [
+		"0"
+	],
+	"filament_retract_lift_below": [
+		"0"
+	],
+	"filament_retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"overhang_fan_speed": [
+		"30"
+	],
+	"keep_fan_always_on": [
+		"0"
+	]
+}

resources/profiles/SeeMeCNC/filament/SeeMeCNC_filament_base.json

@@ -0,0 +1,185 @@
+{
+	"type": "filament",
+	"name": "SeeMeCNC filament base",
+	"from": "system",
+	"instantiation": "false",
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_adaptive_volumetric_speed": [
+		"0"
+	],
+	"filament_adhesiveness_category": [
+		"0"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		" "
+	],
+	"filament_extruder_variant": [
+		"Bowden Standard"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_flush_temp": [
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0"
+	],
+	"filament_ironing_flow": [
+		"nil"
+	],
+	"filament_ironing_inset": [
+		"nil"
+	],
+	"filament_ironing_spacing": [
+		"nil"
+	],
+	"filament_ironing_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"20"
+	],
+	"filament_loading_speed_start": [
+		"3"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_printable": [
+		"3"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		" "
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_toolchange_time": "4",
+	"filament_tower_interface_pre_extrusion_dist": [
+		"10"
+	],
+	"filament_tower_interface_pre_extrusion_length": [
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"-1"
+	],
+	"filament_tower_interface_purge_volume": [
+		"20"
+	],
+	"filament_tower_ironing_area": [
+		"4"
+	],
+	"filament_unloading_speed": [
+		"60"
+	],
+	"filament_unloading_speed_start": [
+		"80"
+	],
+	"filament_vendor": [
+		"SeeMeCNC"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"ironing_fan_speed": [
+		"-1"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"volumetric_speed_coefficients": [
+		""
+	],
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC Artemis 300.json

@@ -0,0 +1,15 @@
+{
+	"type": "machine_model",
+	"name": "SeeMeCNC Artemis 300",
+	"bed_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_texture": "SeeMeCNC_Buildplate_texture.png",
+	"default_materials": "SeeMeCNC PLA",
+	"nozzle_diameter": "0.4;0.5;0.7;1.0",
+	"machine_tech": "FFF",
+	"family": "SeeMeCNC Artemis 300",
+	"thumbnail": "SeeMeCNC Artemis 300_cover.png",
+	"machine_load_filament_time": "4",
+	"machine_unload_filament_time": "4",
+	"model_id": "SEEMECNC_ARTEMIS_300",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC BOSSdelta 300.json

@@ -0,0 +1,15 @@
+{
+	"type": "machine_model",
+	"name": "SeeMeCNC BOSSdelta 300",
+	"bed_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_texture": "SeeMeCNC_Buildplate_texture.png",
+	"default_materials": "SeeMeCNC PLA",
+	"nozzle_diameter": "0.4;0.5;0.7;1.0",
+	"machine_tech": "FFF",
+	"family": "SeeMeCNC BOSSdelta 300",
+	"thumbnail": "SeeMeCNC BOSSdelta 300_cover.png",
+	"machine_load_filament_time": "4",
+	"machine_unload_filament_time": "4",
+	"model_id": "SEEMECNC_BOSSDELTA_300",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC BOSSdelta 500 0505.json

@@ -0,0 +1,15 @@
+{
+	"type": "machine_model",
+	"name": "SeeMeCNC BOSSdelta 500 0505",
+	"bed_model": "SeeMeCNC_Buildplate_Model_500.STL",
+	"bed_texture": "SeeMeCNC_Buildplate_texture.png",
+	"default_materials": "SeeMeCNC PLA",
+	"nozzle_diameter": "0.4;0.5;0.7;1.0",
+	"machine_tech": "FFF",
+	"family": "SeeMeCNC BOSSdelta 500 0505",
+	"thumbnail": "SeeMeCNC BOSSdelta 500 0505_cover.png",
+	"machine_load_filament_time": "4",
+	"machine_unload_filament_time": "4",
+	"model_id": "SEEMECNC_BOSSDELTA_500_0505",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC BOSSdelta 500 0510.json

@@ -0,0 +1,15 @@
+{
+	"type": "machine_model",
+	"name": "SeeMeCNC BOSSdelta 500 0510",
+	"bed_model": "SeeMeCNC_Buildplate_Model_500.STL",
+	"bed_texture": "SeeMeCNC_Buildplate_texture.png",
+	"default_materials": "SeeMeCNC PLA",
+	"nozzle_diameter": "0.4;0.5;0.7;1.0",
+	"machine_tech": "FFF",
+	"family": "SeeMeCNC BOSSdelta 500 0510",
+	"thumbnail": "SeeMeCNC BOSSdelta 500 0510_cover.png",
+	"machine_load_filament_time": "4",
+	"machine_unload_filament_time": "4",
+	"model_id": "SEEMECNC_BOSSDELTA_500_0510",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC BOSSdelta 500 0521.json

@@ -0,0 +1,15 @@
+{
+	"type": "machine_model",
+	"name": "SeeMeCNC BOSSdelta 500 0521",
+	"bed_model": "SeeMeCNC_Buildplate_Model_500.STL",
+	"bed_texture": "SeeMeCNC_Buildplate_texture.png",
+	"default_materials": "SeeMeCNC PLA",
+	"nozzle_diameter": "0.4;0.5;0.7;1.0",
+	"machine_tech": "FFF",
+	"family": "SeeMeCNC BOSSdelta 500 0521",
+	"thumbnail": "SeeMeCNC BOSSdelta 500 0521_cover.png",
+	"machine_load_filament_time": "4",
+	"machine_unload_filament_time": "4",
+	"model_id": "SEEMECNC_BOSSDELTA_500_0521",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC RostockMAX v3.2.json

@@ -0,0 +1,15 @@
+{
+	"type": "machine_model",
+	"name": "SeeMeCNC RostockMAX v3.2",
+	"bed_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_texture": "SeeMeCNC_Buildplate_texture.png",
+	"default_materials": "SeeMeCNC PLA",
+	"nozzle_diameter": "0.4;0.5;0.7;1.0",
+	"machine_tech": "FFF",
+	"family": "SeeMeCNC RostockMAX v3.2",
+	"thumbnail": "SeeMeCNC RostockMAX v3.2_cover.png",
+	"machine_load_filament_time": "4",
+	"machine_unload_filament_time": "4",
+	"model_id": "SEEMECNC_ROSTOCKMAX_V32",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC RostockMAX v4.json

@@ -0,0 +1,15 @@
+{
+	"type": "machine_model",
+	"name": "SeeMeCNC RostockMAX v4",
+	"bed_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_texture": "SeeMeCNC_Buildplate_texture.png",
+	"default_materials": "SeeMeCNC PLA",
+	"nozzle_diameter": "0.4;0.5;0.7;1.0",
+	"machine_tech": "FFF",
+	"family": "SeeMeCNC RostockMAX v4",
+	"thumbnail": "SeeMeCNC RostockMAX v4_cover.png",
+	"machine_load_filament_time": "4",
+	"machine_unload_filament_time": "4",
+	"model_id": "SEEMECNC_ROSTOCKMAX_V4",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_4mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC Artemis 0.4 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "160",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.20mm Standard @SeeMeCNC Artemis 0.4",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"500"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC ARTEMIS END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"200",
+		"200"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC ARTEMIS START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 290mm bed) ---\nG92 E0\nG1 X-50 Y-129.9 Z0.4 F5000   ; Move to arc start (inside 145mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-129.9 R139.2 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-119.9 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.32"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "2.5",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "160",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"145.0000x0.0000",
+		"144.4482x12.6376",
+		"142.7971x25.1790",
+		"140.0592x37.5288",
+		"136.2554x49.5929",
+		"131.4146x61.2796",
+		"125.5737x72.5000",
+		"118.7770x83.1686",
+		"111.0764x93.2042",
+		"102.5305x102.5305",
+		"93.2042x111.0764",
+		"83.1686x118.7770",
+		"72.5000x125.5737",
+		"61.2796x131.4146",
+		"49.5929x136.2554",
+		"37.5288x140.0592",
+		"25.1790x142.7971",
+		"12.6376x144.4482",
+		"0.0000x145.0000",
+		"-12.6376x144.4482",
+		"-25.1790x142.7971",
+		"-37.5288x140.0592",
+		"-49.5929x136.2554",
+		"-61.2796x131.4146",
+		"-72.5000x125.5737",
+		"-83.1686x118.7770",
+		"-93.2042x111.0764",
+		"-102.5305x102.5305",
+		"-111.0764x93.2042",
+		"-118.7770x83.1686",
+		"-125.5737x72.5000",
+		"-131.4146x61.2796",
+		"-136.2554x49.5929",
+		"-140.0592x37.5288",
+		"-142.7971x25.1790",
+		"-144.4482x12.6376",
+		"-145.0000x0.0000",
+		"-144.4482x-12.6376",
+		"-142.7971x-25.1790",
+		"-140.0592x-37.5288",
+		"-136.2554x-49.5929",
+		"-131.4146x-61.2796",
+		"-125.5737x-72.5000",
+		"-118.7770x-83.1686",
+		"-111.0764x-93.2042",
+		"-102.5305x-102.5305",
+		"-93.2042x-111.0764",
+		"-83.1686x-118.7770",
+		"-72.5000x-125.5737",
+		"-61.2796x-131.4146",
+		"-49.5929x-136.2554",
+		"-37.5288x-140.0592",
+		"-25.1790x-142.7971",
+		"-12.6376x-144.4482",
+		"-0.0000x-145.0000",
+		"12.6376x-144.4482",
+		"25.1790x-142.7971",
+		"37.5288x-140.0592",
+		"49.5929x-136.2554",
+		"61.2796x-131.4146",
+		"72.5000x-125.5737",
+		"83.1686x-118.7770",
+		"93.2042x-111.0764",
+		"102.5305x-102.5305",
+		"111.0764x-93.2042",
+		"118.7770x-83.1686",
+		"125.5737x-72.5000",
+		"131.4146x-61.2796",
+		"136.2554x-49.5929",
+		"140.0592x-37.5288",
+		"142.7971x-25.1790",
+		"144.4482x-12.6376"
+	],
+	"printable_height": "500",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC Artemis 300",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC Artemis 0.4 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC Artemis 300",
+	"thumbnail": "SeeMeCNC Artemis 300_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_5mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC Artemis 0.5 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "160",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.25mm Standard @SeeMeCNC Artemis 0.5",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"500"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC ARTEMIS END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"200",
+		"200"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC ARTEMIS START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 290mm bed) ---\nG92 E0\nG1 X-50 Y-129.9 Z0.4 F5000   ; Move to arc start (inside 145mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-129.9 R139.2 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-119.9 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.40"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.10"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.5"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "2.5",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "160",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"145.0000x0.0000",
+		"144.4482x12.6376",
+		"142.7971x25.1790",
+		"140.0592x37.5288",
+		"136.2554x49.5929",
+		"131.4146x61.2796",
+		"125.5737x72.5000",
+		"118.7770x83.1686",
+		"111.0764x93.2042",
+		"102.5305x102.5305",
+		"93.2042x111.0764",
+		"83.1686x118.7770",
+		"72.5000x125.5737",
+		"61.2796x131.4146",
+		"49.5929x136.2554",
+		"37.5288x140.0592",
+		"25.1790x142.7971",
+		"12.6376x144.4482",
+		"0.0000x145.0000",
+		"-12.6376x144.4482",
+		"-25.1790x142.7971",
+		"-37.5288x140.0592",
+		"-49.5929x136.2554",
+		"-61.2796x131.4146",
+		"-72.5000x125.5737",
+		"-83.1686x118.7770",
+		"-93.2042x111.0764",
+		"-102.5305x102.5305",
+		"-111.0764x93.2042",
+		"-118.7770x83.1686",
+		"-125.5737x72.5000",
+		"-131.4146x61.2796",
+		"-136.2554x49.5929",
+		"-140.0592x37.5288",
+		"-142.7971x25.1790",
+		"-144.4482x12.6376",
+		"-145.0000x0.0000",
+		"-144.4482x-12.6376",
+		"-142.7971x-25.1790",
+		"-140.0592x-37.5288",
+		"-136.2554x-49.5929",
+		"-131.4146x-61.2796",
+		"-125.5737x-72.5000",
+		"-118.7770x-83.1686",
+		"-111.0764x-93.2042",
+		"-102.5305x-102.5305",
+		"-93.2042x-111.0764",
+		"-83.1686x-118.7770",
+		"-72.5000x-125.5737",
+		"-61.2796x-131.4146",
+		"-49.5929x-136.2554",
+		"-37.5288x-140.0592",
+		"-25.1790x-142.7971",
+		"-12.6376x-144.4482",
+		"-0.0000x-145.0000",
+		"12.6376x-144.4482",
+		"25.1790x-142.7971",
+		"37.5288x-140.0592",
+		"49.5929x-136.2554",
+		"61.2796x-131.4146",
+		"72.5000x-125.5737",
+		"83.1686x-118.7770",
+		"93.2042x-111.0764",
+		"102.5305x-102.5305",
+		"111.0764x-93.2042",
+		"118.7770x-83.1686",
+		"125.5737x-72.5000",
+		"131.4146x-61.2796",
+		"136.2554x-49.5929",
+		"140.0592x-37.5288",
+		"142.7971x-25.1790",
+		"144.4482x-12.6376"
+	],
+	"printable_height": "500",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC Artemis 300",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC Artemis 0.5 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.5",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC Artemis 300",
+	"thumbnail": "SeeMeCNC Artemis 300_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_7mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC Artemis 0.7 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "160",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.35mm Standard @SeeMeCNC Artemis 0.7",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"500"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC ARTEMIS END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"200",
+		"200"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC ARTEMIS START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 290mm bed) ---\nG92 E0\nG1 X-50 Y-129.9 Z0.4 F5000   ; Move to arc start (inside 145mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-129.9 R139.2 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-119.9 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.56"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.15"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.7"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "2.5",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "160",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"145.0000x0.0000",
+		"144.4482x12.6376",
+		"142.7971x25.1790",
+		"140.0592x37.5288",
+		"136.2554x49.5929",
+		"131.4146x61.2796",
+		"125.5737x72.5000",
+		"118.7770x83.1686",
+		"111.0764x93.2042",
+		"102.5305x102.5305",
+		"93.2042x111.0764",
+		"83.1686x118.7770",
+		"72.5000x125.5737",
+		"61.2796x131.4146",
+		"49.5929x136.2554",
+		"37.5288x140.0592",
+		"25.1790x142.7971",
+		"12.6376x144.4482",
+		"0.0000x145.0000",
+		"-12.6376x144.4482",
+		"-25.1790x142.7971",
+		"-37.5288x140.0592",
+		"-49.5929x136.2554",
+		"-61.2796x131.4146",
+		"-72.5000x125.5737",
+		"-83.1686x118.7770",
+		"-93.2042x111.0764",
+		"-102.5305x102.5305",
+		"-111.0764x93.2042",
+		"-118.7770x83.1686",
+		"-125.5737x72.5000",
+		"-131.4146x61.2796",
+		"-136.2554x49.5929",
+		"-140.0592x37.5288",
+		"-142.7971x25.1790",
+		"-144.4482x12.6376",
+		"-145.0000x0.0000",
+		"-144.4482x-12.6376",
+		"-142.7971x-25.1790",
+		"-140.0592x-37.5288",
+		"-136.2554x-49.5929",
+		"-131.4146x-61.2796",
+		"-125.5737x-72.5000",
+		"-118.7770x-83.1686",
+		"-111.0764x-93.2042",
+		"-102.5305x-102.5305",
+		"-93.2042x-111.0764",
+		"-83.1686x-118.7770",
+		"-72.5000x-125.5737",
+		"-61.2796x-131.4146",
+		"-49.5929x-136.2554",
+		"-37.5288x-140.0592",
+		"-25.1790x-142.7971",
+		"-12.6376x-144.4482",
+		"-0.0000x-145.0000",
+		"12.6376x-144.4482",
+		"25.1790x-142.7971",
+		"37.5288x-140.0592",
+		"49.5929x-136.2554",
+		"61.2796x-131.4146",
+		"72.5000x-125.5737",
+		"83.1686x-118.7770",
+		"93.2042x-111.0764",
+		"102.5305x-102.5305",
+		"111.0764x-93.2042",
+		"118.7770x-83.1686",
+		"125.5737x-72.5000",
+		"131.4146x-61.2796",
+		"136.2554x-49.5929",
+		"140.0592x-37.5288",
+		"142.7971x-25.1790",
+		"144.4482x-12.6376"
+	],
+	"printable_height": "500",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC Artemis 300",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC Artemis 0.7 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.7",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC Artemis 300",
+	"thumbnail": "SeeMeCNC Artemis 300_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_1_0mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC Artemis 1.0 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "160",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.50mm Standard @SeeMeCNC Artemis 1.0",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"500"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC ARTEMIS END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"200",
+		"200"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC ARTEMIS START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 290mm bed) ---\nG92 E0\nG1 X-50 Y-129.9 Z0.4 F5000   ; Move to arc start (inside 145mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-129.9 R139.2 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-119.9 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.80"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.20"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"1.0"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "2.5",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "160",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"145.0000x0.0000",
+		"144.4482x12.6376",
+		"142.7971x25.1790",
+		"140.0592x37.5288",
+		"136.2554x49.5929",
+		"131.4146x61.2796",
+		"125.5737x72.5000",
+		"118.7770x83.1686",
+		"111.0764x93.2042",
+		"102.5305x102.5305",
+		"93.2042x111.0764",
+		"83.1686x118.7770",
+		"72.5000x125.5737",
+		"61.2796x131.4146",
+		"49.5929x136.2554",
+		"37.5288x140.0592",
+		"25.1790x142.7971",
+		"12.6376x144.4482",
+		"0.0000x145.0000",
+		"-12.6376x144.4482",
+		"-25.1790x142.7971",
+		"-37.5288x140.0592",
+		"-49.5929x136.2554",
+		"-61.2796x131.4146",
+		"-72.5000x125.5737",
+		"-83.1686x118.7770",
+		"-93.2042x111.0764",
+		"-102.5305x102.5305",
+		"-111.0764x93.2042",
+		"-118.7770x83.1686",
+		"-125.5737x72.5000",
+		"-131.4146x61.2796",
+		"-136.2554x49.5929",
+		"-140.0592x37.5288",
+		"-142.7971x25.1790",
+		"-144.4482x12.6376",
+		"-145.0000x0.0000",
+		"-144.4482x-12.6376",
+		"-142.7971x-25.1790",
+		"-140.0592x-37.5288",
+		"-136.2554x-49.5929",
+		"-131.4146x-61.2796",
+		"-125.5737x-72.5000",
+		"-118.7770x-83.1686",
+		"-111.0764x-93.2042",
+		"-102.5305x-102.5305",
+		"-93.2042x-111.0764",
+		"-83.1686x-118.7770",
+		"-72.5000x-125.5737",
+		"-61.2796x-131.4146",
+		"-49.5929x-136.2554",
+		"-37.5288x-140.0592",
+		"-25.1790x-142.7971",
+		"-12.6376x-144.4482",
+		"-0.0000x-145.0000",
+		"12.6376x-144.4482",
+		"25.1790x-142.7971",
+		"37.5288x-140.0592",
+		"49.5929x-136.2554",
+		"61.2796x-131.4146",
+		"72.5000x-125.5737",
+		"83.1686x-118.7770",
+		"93.2042x-111.0764",
+		"102.5305x-102.5305",
+		"111.0764x-93.2042",
+		"118.7770x-83.1686",
+		"125.5737x-72.5000",
+		"131.4146x-61.2796",
+		"136.2554x-49.5929",
+		"140.0592x-37.5288",
+		"142.7971x-25.1790",
+		"144.4482x-12.6376"
+	],
+	"printable_height": "500",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC Artemis 300",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC Artemis 1.0 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "1.0",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC Artemis 300",
+	"thumbnail": "SeeMeCNC Artemis 300_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_4mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model_500.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "260",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"580"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0505 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"150",
+		"150"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0505 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 500mm bed) ---\nG92 E0\nG1 X-50 Y-234.7 Z0.4 F5000   ; Move to arc start (inside 250mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-234.7 R240.0 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-224.7 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.32"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "260",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"250.0000x0.0000",
+		"249.0487x21.7889",
+		"246.2019x43.4120",
+		"241.4815x64.7048",
+		"234.9232x85.5050",
+		"226.5769x105.6546",
+		"216.5064x125.0000",
+		"204.7880x143.3941",
+		"191.5111x160.6969",
+		"176.7767x176.7767",
+		"160.6969x191.5111",
+		"143.3941x204.7880",
+		"125.0000x216.5064",
+		"105.6546x226.5769",
+		"85.5050x234.9232",
+		"64.7048x241.4815",
+		"43.4120x246.2019",
+		"21.7889x249.0487",
+		"0.0000x250.0000",
+		"-21.7889x249.0487",
+		"-43.4120x246.2019",
+		"-64.7048x241.4815",
+		"-85.5050x234.9232",
+		"-105.6546x226.5769",
+		"-125.0000x216.5064",
+		"-143.3941x204.7880",
+		"-160.6969x191.5111",
+		"-176.7767x176.7767",
+		"-191.5111x160.6969",
+		"-204.7880x143.3941",
+		"-216.5064x125.0000",
+		"-226.5769x105.6546",
+		"-234.9232x85.5050",
+		"-241.4815x64.7048",
+		"-246.2019x43.4120",
+		"-249.0487x21.7889",
+		"-250.0000x0.0000",
+		"-249.0487x-21.7889",
+		"-246.2019x-43.4120",
+		"-241.4815x-64.7048",
+		"-234.9232x-85.5050",
+		"-226.5769x-105.6546",
+		"-216.5064x-125.0000",
+		"-204.7880x-143.3941",
+		"-191.5111x-160.6969",
+		"-176.7767x-176.7767",
+		"-160.6969x-191.5111",
+		"-143.3941x-204.7880",
+		"-125.0000x-216.5064",
+		"-105.6546x-226.5769",
+		"-85.5050x-234.9232",
+		"-64.7048x-241.4815",
+		"-43.4120x-246.2019",
+		"-21.7889x-249.0487",
+		"-0.0000x-250.0000",
+		"21.7889x-249.0487",
+		"43.4120x-246.2019",
+		"64.7048x-241.4815",
+		"85.5050x-234.9232",
+		"105.6546x-226.5769",
+		"125.0000x-216.5064",
+		"143.3941x-204.7880",
+		"160.6969x-191.5111",
+		"176.7767x-176.7767",
+		"191.5111x-160.6969",
+		"204.7880x-143.3941",
+		"216.5064x-125.0000",
+		"226.5769x-105.6546",
+		"234.9232x-85.5050",
+		"241.4815x-64.7048",
+		"246.2019x-43.4120",
+		"249.0487x-21.7889"
+	],
+	"printable_height": "500",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC BOSSdelta 500 0505",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC BOSSdelta 500 0505",
+	"thumbnail": "SeeMeCNC BOSSdelta 500 0505_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_5mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model_500.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "260",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"580"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0505 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"150",
+		"150"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0505 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 500mm bed) ---\nG92 E0\nG1 X-50 Y-234.7 Z0.4 F5000   ; Move to arc start (inside 250mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-234.7 R240.0 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-224.7 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.4"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.5"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "260",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"250.0000x0.0000",
+		"249.0487x21.7889",
+		"246.2019x43.4120",
+		"241.4815x64.7048",
+		"234.9232x85.5050",
+		"226.5769x105.6546",
+		"216.5064x125.0000",
+		"204.7880x143.3941",
+		"191.5111x160.6969",
+		"176.7767x176.7767",
+		"160.6969x191.5111",
+		"143.3941x204.7880",
+		"125.0000x216.5064",
+		"105.6546x226.5769",
+		"85.5050x234.9232",
+		"64.7048x241.4815",
+		"43.4120x246.2019",
+		"21.7889x249.0487",
+		"0.0000x250.0000",
+		"-21.7889x249.0487",
+		"-43.4120x246.2019",
+		"-64.7048x241.4815",
+		"-85.5050x234.9232",
+		"-105.6546x226.5769",
+		"-125.0000x216.5064",
+		"-143.3941x204.7880",
+		"-160.6969x191.5111",
+		"-176.7767x176.7767",
+		"-191.5111x160.6969",
+		"-204.7880x143.3941",
+		"-216.5064x125.0000",
+		"-226.5769x105.6546",
+		"-234.9232x85.5050",
+		"-241.4815x64.7048",
+		"-246.2019x43.4120",
+		"-249.0487x21.7889",
+		"-250.0000x0.0000",
+		"-249.0487x-21.7889",
+		"-246.2019x-43.4120",
+		"-241.4815x-64.7048",
+		"-234.9232x-85.5050",
+		"-226.5769x-105.6546",
+		"-216.5064x-125.0000",
+		"-204.7880x-143.3941",
+		"-191.5111x-160.6969",
+		"-176.7767x-176.7767",
+		"-160.6969x-191.5111",
+		"-143.3941x-204.7880",
+		"-125.0000x-216.5064",
+		"-105.6546x-226.5769",
+		"-85.5050x-234.9232",
+		"-64.7048x-241.4815",
+		"-43.4120x-246.2019",
+		"-21.7889x-249.0487",
+		"-0.0000x-250.0000",
+		"21.7889x-249.0487",
+		"43.4120x-246.2019",
+		"64.7048x-241.4815",
+		"85.5050x-234.9232",
+		"105.6546x-226.5769",
+		"125.0000x-216.5064",
+		"143.3941x-204.7880",
+		"160.6969x-191.5111",
+		"176.7767x-176.7767",
+		"191.5111x-160.6969",
+		"204.7880x-143.3941",
+		"216.5064x-125.0000",
+		"226.5769x-105.6546",
+		"234.9232x-85.5050",
+		"241.4815x-64.7048",
+		"246.2019x-43.4120",
+		"249.0487x-21.7889"
+	],
+	"printable_height": "500",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC BOSSdelta 500 0505",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.5",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC BOSSdelta 500 0505",
+	"thumbnail": "SeeMeCNC BOSSdelta 500 0505_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_7mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model_500.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "260",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"580"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0505 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"150",
+		"150"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0505 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 500mm bed) ---\nG92 E0\nG1 X-50 Y-234.7 Z0.4 F5000   ; Move to arc start (inside 250mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-234.7 R240.0 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-224.7 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.56"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.7"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "260",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"250.0000x0.0000",
+		"249.0487x21.7889",
+		"246.2019x43.4120",
+		"241.4815x64.7048",
+		"234.9232x85.5050",
+		"226.5769x105.6546",
+		"216.5064x125.0000",
+		"204.7880x143.3941",
+		"191.5111x160.6969",
+		"176.7767x176.7767",
+		"160.6969x191.5111",
+		"143.3941x204.7880",
+		"125.0000x216.5064",
+		"105.6546x226.5769",
+		"85.5050x234.9232",
+		"64.7048x241.4815",
+		"43.4120x246.2019",
+		"21.7889x249.0487",
+		"0.0000x250.0000",
+		"-21.7889x249.0487",
+		"-43.4120x246.2019",
+		"-64.7048x241.4815",
+		"-85.5050x234.9232",
+		"-105.6546x226.5769",
+		"-125.0000x216.5064",
+		"-143.3941x204.7880",
+		"-160.6969x191.5111",
+		"-176.7767x176.7767",
+		"-191.5111x160.6969",
+		"-204.7880x143.3941",
+		"-216.5064x125.0000",
+		"-226.5769x105.6546",
+		"-234.9232x85.5050",
+		"-241.4815x64.7048",
+		"-246.2019x43.4120",
+		"-249.0487x21.7889",
+		"-250.0000x0.0000",
+		"-249.0487x-21.7889",
+		"-246.2019x-43.4120",
+		"-241.4815x-64.7048",
+		"-234.9232x-85.5050",
+		"-226.5769x-105.6546",
+		"-216.5064x-125.0000",
+		"-204.7880x-143.3941",
+		"-191.5111x-160.6969",
+		"-176.7767x-176.7767",
+		"-160.6969x-191.5111",
+		"-143.3941x-204.7880",
+		"-125.0000x-216.5064",
+		"-105.6546x-226.5769",
+		"-85.5050x-234.9232",
+		"-64.7048x-241.4815",
+		"-43.4120x-246.2019",
+		"-21.7889x-249.0487",
+		"-0.0000x-250.0000",
+		"21.7889x-249.0487",
+		"43.4120x-246.2019",
+		"64.7048x-241.4815",
+		"85.5050x-234.9232",
+		"105.6546x-226.5769",
+		"125.0000x-216.5064",
+		"143.3941x-204.7880",
+		"160.6969x-191.5111",
+		"176.7767x-176.7767",
+		"191.5111x-160.6969",
+		"204.7880x-143.3941",
+		"216.5064x-125.0000",
+		"226.5769x-105.6546",
+		"234.9232x-85.5050",
+		"241.4815x-64.7048",
+		"246.2019x-43.4120",
+		"249.0487x-21.7889"
+	],
+	"printable_height": "500",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC BOSSdelta 500 0505",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.7",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC BOSSdelta 500 0505",
+	"thumbnail": "SeeMeCNC BOSSdelta 500 0505_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_1_0mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model_500.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "260",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"580"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0505 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"150",
+		"150"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0505 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 500mm bed) ---\nG92 E0\nG1 X-50 Y-234.7 Z0.4 F5000   ; Move to arc start (inside 250mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-234.7 R240.0 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-224.7 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.8"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"1.0"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "260",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"250.0000x0.0000",
+		"249.0487x21.7889",
+		"246.2019x43.4120",
+		"241.4815x64.7048",
+		"234.9232x85.5050",
+		"226.5769x105.6546",
+		"216.5064x125.0000",
+		"204.7880x143.3941",
+		"191.5111x160.6969",
+		"176.7767x176.7767",
+		"160.6969x191.5111",
+		"143.3941x204.7880",
+		"125.0000x216.5064",
+		"105.6546x226.5769",
+		"85.5050x234.9232",
+		"64.7048x241.4815",
+		"43.4120x246.2019",
+		"21.7889x249.0487",
+		"0.0000x250.0000",
+		"-21.7889x249.0487",
+		"-43.4120x246.2019",
+		"-64.7048x241.4815",
+		"-85.5050x234.9232",
+		"-105.6546x226.5769",
+		"-125.0000x216.5064",
+		"-143.3941x204.7880",
+		"-160.6969x191.5111",
+		"-176.7767x176.7767",
+		"-191.5111x160.6969",
+		"-204.7880x143.3941",
+		"-216.5064x125.0000",
+		"-226.5769x105.6546",
+		"-234.9232x85.5050",
+		"-241.4815x64.7048",
+		"-246.2019x43.4120",
+		"-249.0487x21.7889",
+		"-250.0000x0.0000",
+		"-249.0487x-21.7889",
+		"-246.2019x-43.4120",
+		"-241.4815x-64.7048",
+		"-234.9232x-85.5050",
+		"-226.5769x-105.6546",
+		"-216.5064x-125.0000",
+		"-204.7880x-143.3941",
+		"-191.5111x-160.6969",
+		"-176.7767x-176.7767",
+		"-160.6969x-191.5111",
+		"-143.3941x-204.7880",
+		"-125.0000x-216.5064",
+		"-105.6546x-226.5769",
+		"-85.5050x-234.9232",
+		"-64.7048x-241.4815",
+		"-43.4120x-246.2019",
+		"-21.7889x-249.0487",
+		"-0.0000x-250.0000",
+		"21.7889x-249.0487",
+		"43.4120x-246.2019",
+		"64.7048x-241.4815",
+		"85.5050x-234.9232",
+		"105.6546x-226.5769",
+		"125.0000x-216.5064",
+		"143.3941x-204.7880",
+		"160.6969x-191.5111",
+		"176.7767x-176.7767",
+		"191.5111x-160.6969",
+		"204.7880x-143.3941",
+		"216.5064x-125.0000",
+		"226.5769x-105.6546",
+		"234.9232x-85.5050",
+		"241.4815x-64.7048",
+		"246.2019x-43.4120",
+		"249.0487x-21.7889"
+	],
+	"printable_height": "500",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC BOSSdelta 500 0505",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "1.0",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC BOSSdelta 500 0505",
+	"thumbnail": "SeeMeCNC BOSSdelta 500 0505_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_4mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model_500.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "260",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"1000"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0510 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"100",
+		"100"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0510 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 500mm bed) ---\nG92 E0\nG1 X-50 Y-234.7 Z0.4 F5000   ; Move to arc start (inside 250mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-234.7 R240.0 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-224.7 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.32"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "260",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"250.0000x0.0000",
+		"249.0487x21.7889",
+		"246.2019x43.4120",
+		"241.4815x64.7048",
+		"234.9232x85.5050",
+		"226.5769x105.6546",
+		"216.5064x125.0000",
+		"204.7880x143.3941",
+		"191.5111x160.6969",
+		"176.7767x176.7767",
+		"160.6969x191.5111",
+		"143.3941x204.7880",
+		"125.0000x216.5064",
+		"105.6546x226.5769",
+		"85.5050x234.9232",
+		"64.7048x241.4815",
+		"43.4120x246.2019",
+		"21.7889x249.0487",
+		"0.0000x250.0000",
+		"-21.7889x249.0487",
+		"-43.4120x246.2019",
+		"-64.7048x241.4815",
+		"-85.5050x234.9232",
+		"-105.6546x226.5769",
+		"-125.0000x216.5064",
+		"-143.3941x204.7880",
+		"-160.6969x191.5111",
+		"-176.7767x176.7767",
+		"-191.5111x160.6969",
+		"-204.7880x143.3941",
+		"-216.5064x125.0000",
+		"-226.5769x105.6546",
+		"-234.9232x85.5050",
+		"-241.4815x64.7048",
+		"-246.2019x43.4120",
+		"-249.0487x21.7889",
+		"-250.0000x0.0000",
+		"-249.0487x-21.7889",
+		"-246.2019x-43.4120",
+		"-241.4815x-64.7048",
+		"-234.9232x-85.5050",
+		"-226.5769x-105.6546",
+		"-216.5064x-125.0000",
+		"-204.7880x-143.3941",
+		"-191.5111x-160.6969",
+		"-176.7767x-176.7767",
+		"-160.6969x-191.5111",
+		"-143.3941x-204.7880",
+		"-125.0000x-216.5064",
+		"-105.6546x-226.5769",
+		"-85.5050x-234.9232",
+		"-64.7048x-241.4815",
+		"-43.4120x-246.2019",
+		"-21.7889x-249.0487",
+		"-0.0000x-250.0000",
+		"21.7889x-249.0487",
+		"43.4120x-246.2019",
+		"64.7048x-241.4815",
+		"85.5050x-234.9232",
+		"105.6546x-226.5769",
+		"125.0000x-216.5064",
+		"143.3941x-204.7880",
+		"160.6969x-191.5111",
+		"176.7767x-176.7767",
+		"191.5111x-160.6969",
+		"204.7880x-143.3941",
+		"216.5064x-125.0000",
+		"226.5769x-105.6546",
+		"234.9232x-85.5050",
+		"241.4815x-64.7048",
+		"246.2019x-43.4120",
+		"249.0487x-21.7889"
+	],
+	"printable_height": "1000",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC BOSSdelta 500 0510",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC BOSSdelta 500 0510",
+	"thumbnail": "SeeMeCNC BOSSdelta 500 0510_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_5mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model_500.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "260",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"1000"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0510 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"100",
+		"100"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0510 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 500mm bed) ---\nG92 E0\nG1 X-50 Y-234.7 Z0.4 F5000   ; Move to arc start (inside 250mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-234.7 R240.0 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-224.7 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.4"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.5"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "260",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"250.0000x0.0000",
+		"249.0487x21.7889",
+		"246.2019x43.4120",
+		"241.4815x64.7048",
+		"234.9232x85.5050",
+		"226.5769x105.6546",
+		"216.5064x125.0000",
+		"204.7880x143.3941",
+		"191.5111x160.6969",
+		"176.7767x176.7767",
+		"160.6969x191.5111",
+		"143.3941x204.7880",
+		"125.0000x216.5064",
+		"105.6546x226.5769",
+		"85.5050x234.9232",
+		"64.7048x241.4815",
+		"43.4120x246.2019",
+		"21.7889x249.0487",
+		"0.0000x250.0000",
+		"-21.7889x249.0487",
+		"-43.4120x246.2019",
+		"-64.7048x241.4815",
+		"-85.5050x234.9232",
+		"-105.6546x226.5769",
+		"-125.0000x216.5064",
+		"-143.3941x204.7880",
+		"-160.6969x191.5111",
+		"-176.7767x176.7767",
+		"-191.5111x160.6969",
+		"-204.7880x143.3941",
+		"-216.5064x125.0000",
+		"-226.5769x105.6546",
+		"-234.9232x85.5050",
+		"-241.4815x64.7048",
+		"-246.2019x43.4120",
+		"-249.0487x21.7889",
+		"-250.0000x0.0000",
+		"-249.0487x-21.7889",
+		"-246.2019x-43.4120",
+		"-241.4815x-64.7048",
+		"-234.9232x-85.5050",
+		"-226.5769x-105.6546",
+		"-216.5064x-125.0000",
+		"-204.7880x-143.3941",
+		"-191.5111x-160.6969",
+		"-176.7767x-176.7767",
+		"-160.6969x-191.5111",
+		"-143.3941x-204.7880",
+		"-125.0000x-216.5064",
+		"-105.6546x-226.5769",
+		"-85.5050x-234.9232",
+		"-64.7048x-241.4815",
+		"-43.4120x-246.2019",
+		"-21.7889x-249.0487",
+		"-0.0000x-250.0000",
+		"21.7889x-249.0487",
+		"43.4120x-246.2019",
+		"64.7048x-241.4815",
+		"85.5050x-234.9232",
+		"105.6546x-226.5769",
+		"125.0000x-216.5064",
+		"143.3941x-204.7880",
+		"160.6969x-191.5111",
+		"176.7767x-176.7767",
+		"191.5111x-160.6969",
+		"204.7880x-143.3941",
+		"216.5064x-125.0000",
+		"226.5769x-105.6546",
+		"234.9232x-85.5050",
+		"241.4815x-64.7048",
+		"246.2019x-43.4120",
+		"249.0487x-21.7889"
+	],
+	"printable_height": "1000",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC BOSSdelta 500 0510",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.5",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC BOSSdelta 500 0510",
+	"thumbnail": "SeeMeCNC BOSSdelta 500 0510_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_7mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model_500.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "260",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"1000"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0510 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"100",
+		"100"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0510 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 500mm bed) ---\nG92 E0\nG1 X-50 Y-234.7 Z0.4 F5000   ; Move to arc start (inside 250mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-234.7 R240.0 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-224.7 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.56"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.7"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "260",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"250.0000x0.0000",
+		"249.0487x21.7889",
+		"246.2019x43.4120",
+		"241.4815x64.7048",
+		"234.9232x85.5050",
+		"226.5769x105.6546",
+		"216.5064x125.0000",
+		"204.7880x143.3941",
+		"191.5111x160.6969",
+		"176.7767x176.7767",
+		"160.6969x191.5111",
+		"143.3941x204.7880",
+		"125.0000x216.5064",
+		"105.6546x226.5769",
+		"85.5050x234.9232",
+		"64.7048x241.4815",
+		"43.4120x246.2019",
+		"21.7889x249.0487",
+		"0.0000x250.0000",
+		"-21.7889x249.0487",
+		"-43.4120x246.2019",
+		"-64.7048x241.4815",
+		"-85.5050x234.9232",
+		"-105.6546x226.5769",
+		"-125.0000x216.5064",
+		"-143.3941x204.7880",
+		"-160.6969x191.5111",
+		"-176.7767x176.7767",
+		"-191.5111x160.6969",
+		"-204.7880x143.3941",
+		"-216.5064x125.0000",
+		"-226.5769x105.6546",
+		"-234.9232x85.5050",
+		"-241.4815x64.7048",
+		"-246.2019x43.4120",
+		"-249.0487x21.7889",
+		"-250.0000x0.0000",
+		"-249.0487x-21.7889",
+		"-246.2019x-43.4120",
+		"-241.4815x-64.7048",
+		"-234.9232x-85.5050",
+		"-226.5769x-105.6546",
+		"-216.5064x-125.0000",
+		"-204.7880x-143.3941",
+		"-191.5111x-160.6969",
+		"-176.7767x-176.7767",
+		"-160.6969x-191.5111",
+		"-143.3941x-204.7880",
+		"-125.0000x-216.5064",
+		"-105.6546x-226.5769",
+		"-85.5050x-234.9232",
+		"-64.7048x-241.4815",
+		"-43.4120x-246.2019",
+		"-21.7889x-249.0487",
+		"-0.0000x-250.0000",
+		"21.7889x-249.0487",
+		"43.4120x-246.2019",
+		"64.7048x-241.4815",
+		"85.5050x-234.9232",
+		"105.6546x-226.5769",
+		"125.0000x-216.5064",
+		"143.3941x-204.7880",
+		"160.6969x-191.5111",
+		"176.7767x-176.7767",
+		"191.5111x-160.6969",
+		"204.7880x-143.3941",
+		"216.5064x-125.0000",
+		"226.5769x-105.6546",
+		"234.9232x-85.5050",
+		"241.4815x-64.7048",
+		"246.2019x-43.4120",
+		"249.0487x-21.7889"
+	],
+	"printable_height": "1000",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC BOSSdelta 500 0510",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.7",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC BOSSdelta 500 0510",
+	"thumbnail": "SeeMeCNC BOSSdelta 500 0510_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_1_0mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model_500.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "260",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"1000"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0510 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"100",
+		"100"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0510 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 500mm bed) ---\nG92 E0\nG1 X-50 Y-234.7 Z0.4 F5000   ; Move to arc start (inside 250mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-234.7 R240.0 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-224.7 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.8"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"1.0"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "260",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"250.0000x0.0000",
+		"249.0487x21.7889",
+		"246.2019x43.4120",
+		"241.4815x64.7048",
+		"234.9232x85.5050",
+		"226.5769x105.6546",
+		"216.5064x125.0000",
+		"204.7880x143.3941",
+		"191.5111x160.6969",
+		"176.7767x176.7767",
+		"160.6969x191.5111",
+		"143.3941x204.7880",
+		"125.0000x216.5064",
+		"105.6546x226.5769",
+		"85.5050x234.9232",
+		"64.7048x241.4815",
+		"43.4120x246.2019",
+		"21.7889x249.0487",
+		"0.0000x250.0000",
+		"-21.7889x249.0487",
+		"-43.4120x246.2019",
+		"-64.7048x241.4815",
+		"-85.5050x234.9232",
+		"-105.6546x226.5769",
+		"-125.0000x216.5064",
+		"-143.3941x204.7880",
+		"-160.6969x191.5111",
+		"-176.7767x176.7767",
+		"-191.5111x160.6969",
+		"-204.7880x143.3941",
+		"-216.5064x125.0000",
+		"-226.5769x105.6546",
+		"-234.9232x85.5050",
+		"-241.4815x64.7048",
+		"-246.2019x43.4120",
+		"-249.0487x21.7889",
+		"-250.0000x0.0000",
+		"-249.0487x-21.7889",
+		"-246.2019x-43.4120",
+		"-241.4815x-64.7048",
+		"-234.9232x-85.5050",
+		"-226.5769x-105.6546",
+		"-216.5064x-125.0000",
+		"-204.7880x-143.3941",
+		"-191.5111x-160.6969",
+		"-176.7767x-176.7767",
+		"-160.6969x-191.5111",
+		"-143.3941x-204.7880",
+		"-125.0000x-216.5064",
+		"-105.6546x-226.5769",
+		"-85.5050x-234.9232",
+		"-64.7048x-241.4815",
+		"-43.4120x-246.2019",
+		"-21.7889x-249.0487",
+		"-0.0000x-250.0000",
+		"21.7889x-249.0487",
+		"43.4120x-246.2019",
+		"64.7048x-241.4815",
+		"85.5050x-234.9232",
+		"105.6546x-226.5769",
+		"125.0000x-216.5064",
+		"143.3941x-204.7880",
+		"160.6969x-191.5111",
+		"176.7767x-176.7767",
+		"191.5111x-160.6969",
+		"204.7880x-143.3941",
+		"216.5064x-125.0000",
+		"226.5769x-105.6546",
+		"234.9232x-85.5050",
+		"241.4815x-64.7048",
+		"246.2019x-43.4120",
+		"249.0487x-21.7889"
+	],
+	"printable_height": "1000",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC BOSSdelta 500 0510",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "1.0",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC BOSSdelta 500 0510",
+	"thumbnail": "SeeMeCNC BOSSdelta 500 0510_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_4mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model_500.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "260",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"2100"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0521 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"100",
+		"100"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0521 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 500mm bed) ---\nG92 E0\nG1 X-50 Y-234.7 Z0.4 F5000   ; Move to arc start (inside 250mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-234.7 R240.0 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-224.7 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.32"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "260",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"250.0000x0.0000",
+		"249.0487x21.7889",
+		"246.2019x43.4120",
+		"241.4815x64.7048",
+		"234.9232x85.5050",
+		"226.5769x105.6546",
+		"216.5064x125.0000",
+		"204.7880x143.3941",
+		"191.5111x160.6969",
+		"176.7767x176.7767",
+		"160.6969x191.5111",
+		"143.3941x204.7880",
+		"125.0000x216.5064",
+		"105.6546x226.5769",
+		"85.5050x234.9232",
+		"64.7048x241.4815",
+		"43.4120x246.2019",
+		"21.7889x249.0487",
+		"0.0000x250.0000",
+		"-21.7889x249.0487",
+		"-43.4120x246.2019",
+		"-64.7048x241.4815",
+		"-85.5050x234.9232",
+		"-105.6546x226.5769",
+		"-125.0000x216.5064",
+		"-143.3941x204.7880",
+		"-160.6969x191.5111",
+		"-176.7767x176.7767",
+		"-191.5111x160.6969",
+		"-204.7880x143.3941",
+		"-216.5064x125.0000",
+		"-226.5769x105.6546",
+		"-234.9232x85.5050",
+		"-241.4815x64.7048",
+		"-246.2019x43.4120",
+		"-249.0487x21.7889",
+		"-250.0000x0.0000",
+		"-249.0487x-21.7889",
+		"-246.2019x-43.4120",
+		"-241.4815x-64.7048",
+		"-234.9232x-85.5050",
+		"-226.5769x-105.6546",
+		"-216.5064x-125.0000",
+		"-204.7880x-143.3941",
+		"-191.5111x-160.6969",
+		"-176.7767x-176.7767",
+		"-160.6969x-191.5111",
+		"-143.3941x-204.7880",
+		"-125.0000x-216.5064",
+		"-105.6546x-226.5769",
+		"-85.5050x-234.9232",
+		"-64.7048x-241.4815",
+		"-43.4120x-246.2019",
+		"-21.7889x-249.0487",
+		"-0.0000x-250.0000",
+		"21.7889x-249.0487",
+		"43.4120x-246.2019",
+		"64.7048x-241.4815",
+		"85.5050x-234.9232",
+		"105.6546x-226.5769",
+		"125.0000x-216.5064",
+		"143.3941x-204.7880",
+		"160.6969x-191.5111",
+		"176.7767x-176.7767",
+		"191.5111x-160.6969",
+		"204.7880x-143.3941",
+		"216.5064x-125.0000",
+		"226.5769x-105.6546",
+		"234.9232x-85.5050",
+		"241.4815x-64.7048",
+		"246.2019x-43.4120",
+		"249.0487x-21.7889"
+	],
+	"printable_height": "2100",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC BOSSdelta 500 0521",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "0",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC BOSSdelta 500 0521",
+	"thumbnail": "SeeMeCNC BOSSdelta 500 0521_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_5mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model_500.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "260",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"2100"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0521 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"100",
+		"100"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0521 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 500mm bed) ---\nG92 E0\nG1 X-50 Y-234.7 Z0.4 F5000   ; Move to arc start (inside 250mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-234.7 R240.0 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-224.7 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.4"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.5"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "260",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"250.0000x0.0000",
+		"249.0487x21.7889",
+		"246.2019x43.4120",
+		"241.4815x64.7048",
+		"234.9232x85.5050",
+		"226.5769x105.6546",
+		"216.5064x125.0000",
+		"204.7880x143.3941",
+		"191.5111x160.6969",
+		"176.7767x176.7767",
+		"160.6969x191.5111",
+		"143.3941x204.7880",
+		"125.0000x216.5064",
+		"105.6546x226.5769",
+		"85.5050x234.9232",
+		"64.7048x241.4815",
+		"43.4120x246.2019",
+		"21.7889x249.0487",
+		"0.0000x250.0000",
+		"-21.7889x249.0487",
+		"-43.4120x246.2019",
+		"-64.7048x241.4815",
+		"-85.5050x234.9232",
+		"-105.6546x226.5769",
+		"-125.0000x216.5064",
+		"-143.3941x204.7880",
+		"-160.6969x191.5111",
+		"-176.7767x176.7767",
+		"-191.5111x160.6969",
+		"-204.7880x143.3941",
+		"-216.5064x125.0000",
+		"-226.5769x105.6546",
+		"-234.9232x85.5050",
+		"-241.4815x64.7048",
+		"-246.2019x43.4120",
+		"-249.0487x21.7889",
+		"-250.0000x0.0000",
+		"-249.0487x-21.7889",
+		"-246.2019x-43.4120",
+		"-241.4815x-64.7048",
+		"-234.9232x-85.5050",
+		"-226.5769x-105.6546",
+		"-216.5064x-125.0000",
+		"-204.7880x-143.3941",
+		"-191.5111x-160.6969",
+		"-176.7767x-176.7767",
+		"-160.6969x-191.5111",
+		"-143.3941x-204.7880",
+		"-125.0000x-216.5064",
+		"-105.6546x-226.5769",
+		"-85.5050x-234.9232",
+		"-64.7048x-241.4815",
+		"-43.4120x-246.2019",
+		"-21.7889x-249.0487",
+		"-0.0000x-250.0000",
+		"21.7889x-249.0487",
+		"43.4120x-246.2019",
+		"64.7048x-241.4815",
+		"85.5050x-234.9232",
+		"105.6546x-226.5769",
+		"125.0000x-216.5064",
+		"143.3941x-204.7880",
+		"160.6969x-191.5111",
+		"176.7767x-176.7767",
+		"191.5111x-160.6969",
+		"204.7880x-143.3941",
+		"216.5064x-125.0000",
+		"226.5769x-105.6546",
+		"234.9232x-85.5050",
+		"241.4815x-64.7048",
+		"246.2019x-43.4120",
+		"249.0487x-21.7889"
+	],
+	"printable_height": "2100",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC BOSSdelta 500 0521",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.5",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "0",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC BOSSdelta 500 0521",
+	"thumbnail": "SeeMeCNC BOSSdelta 500 0521_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_7mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model_500.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "260",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"2100"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0521 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"100",
+		"100"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0521 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 500mm bed) ---\nG92 E0\nG1 X-50 Y-234.7 Z0.4 F5000   ; Move to arc start (inside 250mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-234.7 R240.0 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-224.7 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.56"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.7"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "260",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"250.0000x0.0000",
+		"249.0487x21.7889",
+		"246.2019x43.4120",
+		"241.4815x64.7048",
+		"234.9232x85.5050",
+		"226.5769x105.6546",
+		"216.5064x125.0000",
+		"204.7880x143.3941",
+		"191.5111x160.6969",
+		"176.7767x176.7767",
+		"160.6969x191.5111",
+		"143.3941x204.7880",
+		"125.0000x216.5064",
+		"105.6546x226.5769",
+		"85.5050x234.9232",
+		"64.7048x241.4815",
+		"43.4120x246.2019",
+		"21.7889x249.0487",
+		"0.0000x250.0000",
+		"-21.7889x249.0487",
+		"-43.4120x246.2019",
+		"-64.7048x241.4815",
+		"-85.5050x234.9232",
+		"-105.6546x226.5769",
+		"-125.0000x216.5064",
+		"-143.3941x204.7880",
+		"-160.6969x191.5111",
+		"-176.7767x176.7767",
+		"-191.5111x160.6969",
+		"-204.7880x143.3941",
+		"-216.5064x125.0000",
+		"-226.5769x105.6546",
+		"-234.9232x85.5050",
+		"-241.4815x64.7048",
+		"-246.2019x43.4120",
+		"-249.0487x21.7889",
+		"-250.0000x0.0000",
+		"-249.0487x-21.7889",
+		"-246.2019x-43.4120",
+		"-241.4815x-64.7048",
+		"-234.9232x-85.5050",
+		"-226.5769x-105.6546",
+		"-216.5064x-125.0000",
+		"-204.7880x-143.3941",
+		"-191.5111x-160.6969",
+		"-176.7767x-176.7767",
+		"-160.6969x-191.5111",
+		"-143.3941x-204.7880",
+		"-125.0000x-216.5064",
+		"-105.6546x-226.5769",
+		"-85.5050x-234.9232",
+		"-64.7048x-241.4815",
+		"-43.4120x-246.2019",
+		"-21.7889x-249.0487",
+		"-0.0000x-250.0000",
+		"21.7889x-249.0487",
+		"43.4120x-246.2019",
+		"64.7048x-241.4815",
+		"85.5050x-234.9232",
+		"105.6546x-226.5769",
+		"125.0000x-216.5064",
+		"143.3941x-204.7880",
+		"160.6969x-191.5111",
+		"176.7767x-176.7767",
+		"191.5111x-160.6969",
+		"204.7880x-143.3941",
+		"216.5064x-125.0000",
+		"226.5769x-105.6546",
+		"234.9232x-85.5050",
+		"241.4815x-64.7048",
+		"246.2019x-43.4120",
+		"249.0487x-21.7889"
+	],
+	"printable_height": "2100",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC BOSSdelta 500 0521",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.7",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "0",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC BOSSdelta 500 0521",
+	"thumbnail": "SeeMeCNC BOSSdelta 500 0521_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_1_0mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model_500.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "260",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"2100"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0521 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"100",
+		"100"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC BOSSDELTA 500 0521 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 500mm bed) ---\nG92 E0\nG1 X-50 Y-234.7 Z0.4 F5000   ; Move to arc start (inside 250mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-234.7 R240.0 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-224.7 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.8"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"1.0"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "260",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"250.0000x0.0000",
+		"249.0487x21.7889",
+		"246.2019x43.4120",
+		"241.4815x64.7048",
+		"234.9232x85.5050",
+		"226.5769x105.6546",
+		"216.5064x125.0000",
+		"204.7880x143.3941",
+		"191.5111x160.6969",
+		"176.7767x176.7767",
+		"160.6969x191.5111",
+		"143.3941x204.7880",
+		"125.0000x216.5064",
+		"105.6546x226.5769",
+		"85.5050x234.9232",
+		"64.7048x241.4815",
+		"43.4120x246.2019",
+		"21.7889x249.0487",
+		"0.0000x250.0000",
+		"-21.7889x249.0487",
+		"-43.4120x246.2019",
+		"-64.7048x241.4815",
+		"-85.5050x234.9232",
+		"-105.6546x226.5769",
+		"-125.0000x216.5064",
+		"-143.3941x204.7880",
+		"-160.6969x191.5111",
+		"-176.7767x176.7767",
+		"-191.5111x160.6969",
+		"-204.7880x143.3941",
+		"-216.5064x125.0000",
+		"-226.5769x105.6546",
+		"-234.9232x85.5050",
+		"-241.4815x64.7048",
+		"-246.2019x43.4120",
+		"-249.0487x21.7889",
+		"-250.0000x0.0000",
+		"-249.0487x-21.7889",
+		"-246.2019x-43.4120",
+		"-241.4815x-64.7048",
+		"-234.9232x-85.5050",
+		"-226.5769x-105.6546",
+		"-216.5064x-125.0000",
+		"-204.7880x-143.3941",
+		"-191.5111x-160.6969",
+		"-176.7767x-176.7767",
+		"-160.6969x-191.5111",
+		"-143.3941x-204.7880",
+		"-125.0000x-216.5064",
+		"-105.6546x-226.5769",
+		"-85.5050x-234.9232",
+		"-64.7048x-241.4815",
+		"-43.4120x-246.2019",
+		"-21.7889x-249.0487",
+		"-0.0000x-250.0000",
+		"21.7889x-249.0487",
+		"43.4120x-246.2019",
+		"64.7048x-241.4815",
+		"85.5050x-234.9232",
+		"105.6546x-226.5769",
+		"125.0000x-216.5064",
+		"143.3941x-204.7880",
+		"160.6969x-191.5111",
+		"176.7767x-176.7767",
+		"191.5111x-160.6969",
+		"204.7880x-143.3941",
+		"216.5064x-125.0000",
+		"226.5769x-105.6546",
+		"234.9232x-85.5050",
+		"241.4815x-64.7048",
+		"246.2019x-43.4120",
+		"249.0487x-21.7889"
+	],
+	"printable_height": "2100",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC BOSSdelta 500 0521",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "1.0",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "0",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC BOSSdelta 500 0521",
+	"thumbnail": "SeeMeCNC BOSSdelta 500 0521_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_4mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC BOSSdelta 300 0.4 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "160",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"495"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC BOSSDELTA 300 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"200",
+		"200"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC BOSSDELTA 300 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 300mm bed) ---\nG92 E0\nG1 X-50 Y-135.0 Z0.4 F5000   ; Move to arc start (inside 150mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-135.0 R144.0 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-125.0 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.32"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "160",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"150.0000x0.0000",
+		"149.4292x13.0734",
+		"147.7212x26.0472",
+		"144.8889x38.8229",
+		"140.9539x51.3030",
+		"135.9462x63.3927",
+		"129.9038x75.0000",
+		"122.8728x86.0365",
+		"114.9067x96.4181",
+		"106.0660x106.0660",
+		"96.4181x114.9067",
+		"86.0365x122.8728",
+		"75.0000x129.9038",
+		"63.3927x135.9462",
+		"51.3030x140.9539",
+		"38.8229x144.8889",
+		"26.0472x147.7212",
+		"13.0734x149.4292",
+		"0.0000x150.0000",
+		"-13.0734x149.4292",
+		"-26.0472x147.7212",
+		"-38.8229x144.8889",
+		"-51.3030x140.9539",
+		"-63.3927x135.9462",
+		"-75.0000x129.9038",
+		"-86.0365x122.8728",
+		"-96.4181x114.9067",
+		"-106.0660x106.0660",
+		"-114.9067x96.4181",
+		"-122.8728x86.0365",
+		"-129.9038x75.0000",
+		"-135.9462x63.3927",
+		"-140.9539x51.3030",
+		"-144.8889x38.8229",
+		"-147.7212x26.0472",
+		"-149.4292x13.0734",
+		"-150.0000x0.0000",
+		"-149.4292x-13.0734",
+		"-147.7212x-26.0472",
+		"-144.8889x-38.8229",
+		"-140.9539x-51.3030",
+		"-135.9462x-63.3927",
+		"-129.9038x-75.0000",
+		"-122.8728x-86.0365",
+		"-114.9067x-96.4181",
+		"-106.0660x-106.0660",
+		"-96.4181x-114.9067",
+		"-86.0365x-122.8728",
+		"-75.0000x-129.9038",
+		"-63.3927x-135.9462",
+		"-51.3030x-140.9539",
+		"-38.8229x-144.8889",
+		"-26.0472x-147.7212",
+		"-13.0734x-149.4292",
+		"-0.0000x-150.0000",
+		"13.0734x-149.4292",
+		"26.0472x-147.7212",
+		"38.8229x-144.8889",
+		"51.3030x-140.9539",
+		"63.3927x-135.9462",
+		"75.0000x-129.9038",
+		"86.0365x-122.8728",
+		"96.4181x-114.9067",
+		"106.0660x-106.0660",
+		"114.9067x-96.4181",
+		"122.8728x-86.0365",
+		"129.9038x-75.0000",
+		"135.9462x-63.3927",
+		"140.9539x-51.3030",
+		"144.8889x-38.8229",
+		"147.7212x-26.0472",
+		"149.4292x-13.0734"
+	],
+	"printable_height": "495",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC BOSSdelta 300",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC BOSSdelta 300 0.4 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC BOSSdelta 300",
+	"thumbnail": "SeeMeCNC BOSSdelta 300_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_5mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC BOSSdelta 300 0.5 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "160",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"495"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC BOSSDELTA 300 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"200",
+		"200"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC BOSSDELTA 300 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 300mm bed) ---\nG92 E0\nG1 X-50 Y-135.0 Z0.4 F5000   ; Move to arc start (inside 150mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-135.0 R144.0 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-125.0 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.40"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.10"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.5"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "160",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"150.0000x0.0000",
+		"149.4292x13.0734",
+		"147.7212x26.0472",
+		"144.8889x38.8229",
+		"140.9539x51.3030",
+		"135.9462x63.3927",
+		"129.9038x75.0000",
+		"122.8728x86.0365",
+		"114.9067x96.4181",
+		"106.0660x106.0660",
+		"96.4181x114.9067",
+		"86.0365x122.8728",
+		"75.0000x129.9038",
+		"63.3927x135.9462",
+		"51.3030x140.9539",
+		"38.8229x144.8889",
+		"26.0472x147.7212",
+		"13.0734x149.4292",
+		"0.0000x150.0000",
+		"-13.0734x149.4292",
+		"-26.0472x147.7212",
+		"-38.8229x144.8889",
+		"-51.3030x140.9539",
+		"-63.3927x135.9462",
+		"-75.0000x129.9038",
+		"-86.0365x122.8728",
+		"-96.4181x114.9067",
+		"-106.0660x106.0660",
+		"-114.9067x96.4181",
+		"-122.8728x86.0365",
+		"-129.9038x75.0000",
+		"-135.9462x63.3927",
+		"-140.9539x51.3030",
+		"-144.8889x38.8229",
+		"-147.7212x26.0472",
+		"-149.4292x13.0734",
+		"-150.0000x0.0000",
+		"-149.4292x-13.0734",
+		"-147.7212x-26.0472",
+		"-144.8889x-38.8229",
+		"-140.9539x-51.3030",
+		"-135.9462x-63.3927",
+		"-129.9038x-75.0000",
+		"-122.8728x-86.0365",
+		"-114.9067x-96.4181",
+		"-106.0660x-106.0660",
+		"-96.4181x-114.9067",
+		"-86.0365x-122.8728",
+		"-75.0000x-129.9038",
+		"-63.3927x-135.9462",
+		"-51.3030x-140.9539",
+		"-38.8229x-144.8889",
+		"-26.0472x-147.7212",
+		"-13.0734x-149.4292",
+		"-0.0000x-150.0000",
+		"13.0734x-149.4292",
+		"26.0472x-147.7212",
+		"38.8229x-144.8889",
+		"51.3030x-140.9539",
+		"63.3927x-135.9462",
+		"75.0000x-129.9038",
+		"86.0365x-122.8728",
+		"96.4181x-114.9067",
+		"106.0660x-106.0660",
+		"114.9067x-96.4181",
+		"122.8728x-86.0365",
+		"129.9038x-75.0000",
+		"135.9462x-63.3927",
+		"140.9539x-51.3030",
+		"144.8889x-38.8229",
+		"147.7212x-26.0472",
+		"149.4292x-13.0734"
+	],
+	"printable_height": "495",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC BOSSdelta 300",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC BOSSdelta 300 0.5 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.5",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC BOSSdelta 300",
+	"thumbnail": "SeeMeCNC BOSSdelta 300_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_7mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC BOSSdelta 300 0.7 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "160",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"495"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC BOSSDELTA 300 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"200",
+		"200"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC BOSSDELTA 300 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 300mm bed) ---\nG92 E0\nG1 X-50 Y-135.0 Z0.4 F5000   ; Move to arc start (inside 150mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-135.0 R144.0 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-125.0 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.56"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.15"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.7"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "160",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"150.0000x0.0000",
+		"149.4292x13.0734",
+		"147.7212x26.0472",
+		"144.8889x38.8229",
+		"140.9539x51.3030",
+		"135.9462x63.3927",
+		"129.9038x75.0000",
+		"122.8728x86.0365",
+		"114.9067x96.4181",
+		"106.0660x106.0660",
+		"96.4181x114.9067",
+		"86.0365x122.8728",
+		"75.0000x129.9038",
+		"63.3927x135.9462",
+		"51.3030x140.9539",
+		"38.8229x144.8889",
+		"26.0472x147.7212",
+		"13.0734x149.4292",
+		"0.0000x150.0000",
+		"-13.0734x149.4292",
+		"-26.0472x147.7212",
+		"-38.8229x144.8889",
+		"-51.3030x140.9539",
+		"-63.3927x135.9462",
+		"-75.0000x129.9038",
+		"-86.0365x122.8728",
+		"-96.4181x114.9067",
+		"-106.0660x106.0660",
+		"-114.9067x96.4181",
+		"-122.8728x86.0365",
+		"-129.9038x75.0000",
+		"-135.9462x63.3927",
+		"-140.9539x51.3030",
+		"-144.8889x38.8229",
+		"-147.7212x26.0472",
+		"-149.4292x13.0734",
+		"-150.0000x0.0000",
+		"-149.4292x-13.0734",
+		"-147.7212x-26.0472",
+		"-144.8889x-38.8229",
+		"-140.9539x-51.3030",
+		"-135.9462x-63.3927",
+		"-129.9038x-75.0000",
+		"-122.8728x-86.0365",
+		"-114.9067x-96.4181",
+		"-106.0660x-106.0660",
+		"-96.4181x-114.9067",
+		"-86.0365x-122.8728",
+		"-75.0000x-129.9038",
+		"-63.3927x-135.9462",
+		"-51.3030x-140.9539",
+		"-38.8229x-144.8889",
+		"-26.0472x-147.7212",
+		"-13.0734x-149.4292",
+		"-0.0000x-150.0000",
+		"13.0734x-149.4292",
+		"26.0472x-147.7212",
+		"38.8229x-144.8889",
+		"51.3030x-140.9539",
+		"63.3927x-135.9462",
+		"75.0000x-129.9038",
+		"86.0365x-122.8728",
+		"96.4181x-114.9067",
+		"106.0660x-106.0660",
+		"114.9067x-96.4181",
+		"122.8728x-86.0365",
+		"129.9038x-75.0000",
+		"135.9462x-63.3927",
+		"140.9539x-51.3030",
+		"144.8889x-38.8229",
+		"147.7212x-26.0472",
+		"149.4292x-13.0734"
+	],
+	"printable_height": "495",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC BOSSdelta 300",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC BOSSdelta 300 0.7 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.7",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC BOSSdelta 300",
+	"thumbnail": "SeeMeCNC BOSSdelta 300_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_1_0mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC BOSSdelta 300 1.0 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "160",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"495"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC BOSSDELTA 300 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"200",
+		"200"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC BOSSDELTA 300 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 300mm bed) ---\nG92 E0\nG1 X-50 Y-135.0 Z0.4 F5000   ; Move to arc start (inside 150mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-135.0 R144.0 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-125.0 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.80"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.20"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"1.0"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "160",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"150.0000x0.0000",
+		"149.4292x13.0734",
+		"147.7212x26.0472",
+		"144.8889x38.8229",
+		"140.9539x51.3030",
+		"135.9462x63.3927",
+		"129.9038x75.0000",
+		"122.8728x86.0365",
+		"114.9067x96.4181",
+		"106.0660x106.0660",
+		"96.4181x114.9067",
+		"86.0365x122.8728",
+		"75.0000x129.9038",
+		"63.3927x135.9462",
+		"51.3030x140.9539",
+		"38.8229x144.8889",
+		"26.0472x147.7212",
+		"13.0734x149.4292",
+		"0.0000x150.0000",
+		"-13.0734x149.4292",
+		"-26.0472x147.7212",
+		"-38.8229x144.8889",
+		"-51.3030x140.9539",
+		"-63.3927x135.9462",
+		"-75.0000x129.9038",
+		"-86.0365x122.8728",
+		"-96.4181x114.9067",
+		"-106.0660x106.0660",
+		"-114.9067x96.4181",
+		"-122.8728x86.0365",
+		"-129.9038x75.0000",
+		"-135.9462x63.3927",
+		"-140.9539x51.3030",
+		"-144.8889x38.8229",
+		"-147.7212x26.0472",
+		"-149.4292x13.0734",
+		"-150.0000x0.0000",
+		"-149.4292x-13.0734",
+		"-147.7212x-26.0472",
+		"-144.8889x-38.8229",
+		"-140.9539x-51.3030",
+		"-135.9462x-63.3927",
+		"-129.9038x-75.0000",
+		"-122.8728x-86.0365",
+		"-114.9067x-96.4181",
+		"-106.0660x-106.0660",
+		"-96.4181x-114.9067",
+		"-86.0365x-122.8728",
+		"-75.0000x-129.9038",
+		"-63.3927x-135.9462",
+		"-51.3030x-140.9539",
+		"-38.8229x-144.8889",
+		"-26.0472x-147.7212",
+		"-13.0734x-149.4292",
+		"-0.0000x-150.0000",
+		"13.0734x-149.4292",
+		"26.0472x-147.7212",
+		"38.8229x-144.8889",
+		"51.3030x-140.9539",
+		"63.3927x-135.9462",
+		"75.0000x-129.9038",
+		"86.0365x-122.8728",
+		"96.4181x-114.9067",
+		"106.0660x-106.0660",
+		"114.9067x-96.4181",
+		"122.8728x-86.0365",
+		"129.9038x-75.0000",
+		"135.9462x-63.3927",
+		"140.9539x-51.3030",
+		"144.8889x-38.8229",
+		"147.7212x-26.0472",
+		"149.4292x-13.0734"
+	],
+	"printable_height": "495",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC BOSSdelta 300",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC BOSSdelta 300 1.0 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "1.0",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC BOSSdelta 300",
+	"thumbnail": "SeeMeCNC BOSSdelta 300_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_4mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC RostockMAX v3.2 0.4 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "160",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"385"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC ROSTOCKMAX V3.2 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"200",
+		"200"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC ROSTOCKMAX V3.2 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 270mm bed) ---\nG92 E0\nG1 X-50 Y-119.6 Z0.4 F5000   ; Move to arc start (inside 135mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-119.6 R129.6 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-109.6 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.32"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "160",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"135.0000x0.0000",
+		"134.4863x11.7660",
+		"132.9490x23.4425",
+		"130.4000x34.9406",
+		"126.8585x46.1727",
+		"122.3516x57.0535",
+		"116.9134x67.5000",
+		"110.5855x77.4328",
+		"103.4160x86.7763",
+		"95.4594x95.4594",
+		"86.7763x103.4160",
+		"77.4328x110.5855",
+		"67.5000x116.9134",
+		"57.0535x122.3516",
+		"46.1727x126.8585",
+		"34.9406x130.4000",
+		"23.4425x132.9490",
+		"11.7660x134.4863",
+		"0.0000x135.0000",
+		"-11.7660x134.4863",
+		"-23.4425x132.9490",
+		"-34.9406x130.4000",
+		"-46.1727x126.8585",
+		"-57.0535x122.3516",
+		"-67.5000x116.9134",
+		"-77.4328x110.5855",
+		"-86.7763x103.4160",
+		"-95.4594x95.4594",
+		"-103.4160x86.7763",
+		"-110.5855x77.4328",
+		"-116.9134x67.5000",
+		"-122.3516x57.0535",
+		"-126.8585x46.1727",
+		"-130.4000x34.9406",
+		"-132.9490x23.4425",
+		"-134.4863x11.7660",
+		"-135.0000x0.0000",
+		"-134.4863x-11.7660",
+		"-132.9490x-23.4425",
+		"-130.4000x-34.9406",
+		"-126.8585x-46.1727",
+		"-122.3516x-57.0535",
+		"-116.9134x-67.5000",
+		"-110.5855x-77.4328",
+		"-103.4160x-86.7763",
+		"-95.4594x-95.4594",
+		"-86.7763x-103.4160",
+		"-77.4328x-110.5855",
+		"-67.5000x-116.9134",
+		"-57.0535x-122.3516",
+		"-46.1727x-126.8585",
+		"-34.9406x-130.4000",
+		"-23.4425x-132.9490",
+		"-11.7660x-134.4863",
+		"-0.0000x-135.0000",
+		"11.7660x-134.4863",
+		"23.4425x-132.9490",
+		"34.9406x-130.4000",
+		"46.1727x-126.8585",
+		"57.0535x-122.3516",
+		"67.5000x-116.9134",
+		"77.4328x-110.5855",
+		"86.7763x-103.4160",
+		"95.4594x-95.4594",
+		"103.4160x-86.7763",
+		"110.5855x-77.4328",
+		"116.9134x-67.5000",
+		"122.3516x-57.0535",
+		"126.8585x-46.1727",
+		"130.4000x-34.9406",
+		"132.9490x-23.4425",
+		"134.4863x-11.7660"
+	],
+	"printable_height": "385",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC RostockMAX v3.2",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC RostockMAX v3.2 0.4 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC RostockMAX v3.2",
+	"thumbnail": "SeeMeCNC RostockMAX v3.2_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_5mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC RostockMAX v3.2 0.5 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "160",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"385"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC ROSTOCKMAX V3.2 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"200",
+		"200"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC ROSTOCKMAX V3.2 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 270mm bed) ---\nG92 E0\nG1 X-50 Y-119.6 Z0.4 F5000   ; Move to arc start (inside 135mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-119.6 R129.6 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-109.6 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.4"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.5"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "160",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"135.0000x0.0000",
+		"134.4863x11.7660",
+		"132.9490x23.4425",
+		"130.4000x34.9406",
+		"126.8585x46.1727",
+		"122.3516x57.0535",
+		"116.9134x67.5000",
+		"110.5855x77.4328",
+		"103.4160x86.7763",
+		"95.4594x95.4594",
+		"86.7763x103.4160",
+		"77.4328x110.5855",
+		"67.5000x116.9134",
+		"57.0535x122.3516",
+		"46.1727x126.8585",
+		"34.9406x130.4000",
+		"23.4425x132.9490",
+		"11.7660x134.4863",
+		"0.0000x135.0000",
+		"-11.7660x134.4863",
+		"-23.4425x132.9490",
+		"-34.9406x130.4000",
+		"-46.1727x126.8585",
+		"-57.0535x122.3516",
+		"-67.5000x116.9134",
+		"-77.4328x110.5855",
+		"-86.7763x103.4160",
+		"-95.4594x95.4594",
+		"-103.4160x86.7763",
+		"-110.5855x77.4328",
+		"-116.9134x67.5000",
+		"-122.3516x57.0535",
+		"-126.8585x46.1727",
+		"-130.4000x34.9406",
+		"-132.9490x23.4425",
+		"-134.4863x11.7660",
+		"-135.0000x0.0000",
+		"-134.4863x-11.7660",
+		"-132.9490x-23.4425",
+		"-130.4000x-34.9406",
+		"-126.8585x-46.1727",
+		"-122.3516x-57.0535",
+		"-116.9134x-67.5000",
+		"-110.5855x-77.4328",
+		"-103.4160x-86.7763",
+		"-95.4594x-95.4594",
+		"-86.7763x-103.4160",
+		"-77.4328x-110.5855",
+		"-67.5000x-116.9134",
+		"-57.0535x-122.3516",
+		"-46.1727x-126.8585",
+		"-34.9406x-130.4000",
+		"-23.4425x-132.9490",
+		"-11.7660x-134.4863",
+		"-0.0000x-135.0000",
+		"11.7660x-134.4863",
+		"23.4425x-132.9490",
+		"34.9406x-130.4000",
+		"46.1727x-126.8585",
+		"57.0535x-122.3516",
+		"67.5000x-116.9134",
+		"77.4328x-110.5855",
+		"86.7763x-103.4160",
+		"95.4594x-95.4594",
+		"103.4160x-86.7763",
+		"110.5855x-77.4328",
+		"116.9134x-67.5000",
+		"122.3516x-57.0535",
+		"126.8585x-46.1727",
+		"130.4000x-34.9406",
+		"132.9490x-23.4425",
+		"134.4863x-11.7660"
+	],
+	"printable_height": "385",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC RostockMAX v3.2",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC RostockMAX v3.2 0.5 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.5",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC RostockMAX v3.2",
+	"thumbnail": "SeeMeCNC RostockMAX v3.2_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_7mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC RostockMAX v3.2 0.7 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "160",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"385"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC ROSTOCKMAX V3.2 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"200",
+		"200"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC ROSTOCKMAX V3.2 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 270mm bed) ---\nG92 E0\nG1 X-50 Y-119.6 Z0.4 F5000   ; Move to arc start (inside 135mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-119.6 R129.6 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-109.6 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.56"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.7"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "160",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"135.0000x0.0000",
+		"134.4863x11.7660",
+		"132.9490x23.4425",
+		"130.4000x34.9406",
+		"126.8585x46.1727",
+		"122.3516x57.0535",
+		"116.9134x67.5000",
+		"110.5855x77.4328",
+		"103.4160x86.7763",
+		"95.4594x95.4594",
+		"86.7763x103.4160",
+		"77.4328x110.5855",
+		"67.5000x116.9134",
+		"57.0535x122.3516",
+		"46.1727x126.8585",
+		"34.9406x130.4000",
+		"23.4425x132.9490",
+		"11.7660x134.4863",
+		"0.0000x135.0000",
+		"-11.7660x134.4863",
+		"-23.4425x132.9490",
+		"-34.9406x130.4000",
+		"-46.1727x126.8585",
+		"-57.0535x122.3516",
+		"-67.5000x116.9134",
+		"-77.4328x110.5855",
+		"-86.7763x103.4160",
+		"-95.4594x95.4594",
+		"-103.4160x86.7763",
+		"-110.5855x77.4328",
+		"-116.9134x67.5000",
+		"-122.3516x57.0535",
+		"-126.8585x46.1727",
+		"-130.4000x34.9406",
+		"-132.9490x23.4425",
+		"-134.4863x11.7660",
+		"-135.0000x0.0000",
+		"-134.4863x-11.7660",
+		"-132.9490x-23.4425",
+		"-130.4000x-34.9406",
+		"-126.8585x-46.1727",
+		"-122.3516x-57.0535",
+		"-116.9134x-67.5000",
+		"-110.5855x-77.4328",
+		"-103.4160x-86.7763",
+		"-95.4594x-95.4594",
+		"-86.7763x-103.4160",
+		"-77.4328x-110.5855",
+		"-67.5000x-116.9134",
+		"-57.0535x-122.3516",
+		"-46.1727x-126.8585",
+		"-34.9406x-130.4000",
+		"-23.4425x-132.9490",
+		"-11.7660x-134.4863",
+		"-0.0000x-135.0000",
+		"11.7660x-134.4863",
+		"23.4425x-132.9490",
+		"34.9406x-130.4000",
+		"46.1727x-126.8585",
+		"57.0535x-122.3516",
+		"67.5000x-116.9134",
+		"77.4328x-110.5855",
+		"86.7763x-103.4160",
+		"95.4594x-95.4594",
+		"103.4160x-86.7763",
+		"110.5855x-77.4328",
+		"116.9134x-67.5000",
+		"122.3516x-57.0535",
+		"126.8585x-46.1727",
+		"130.4000x-34.9406",
+		"132.9490x-23.4425",
+		"134.4863x-11.7660"
+	],
+	"printable_height": "385",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC RostockMAX v3.2",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC RostockMAX v3.2 0.7 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.7",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC RostockMAX v3.2",
+	"thumbnail": "SeeMeCNC RostockMAX v3.2_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_1_0mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC RostockMAX v3.2 1.0 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "160",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"385"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC ROSTOCKMAX V3.2 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"200",
+		"200"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC ROSTOCKMAX V3.2 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 270mm bed) ---\nG92 E0\nG1 X-50 Y-119.6 Z0.4 F5000   ; Move to arc start (inside 135mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-119.6 R129.6 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-109.6 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.8"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"1.0"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "160",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"135.0000x0.0000",
+		"134.4863x11.7660",
+		"132.9490x23.4425",
+		"130.4000x34.9406",
+		"126.8585x46.1727",
+		"122.3516x57.0535",
+		"116.9134x67.5000",
+		"110.5855x77.4328",
+		"103.4160x86.7763",
+		"95.4594x95.4594",
+		"86.7763x103.4160",
+		"77.4328x110.5855",
+		"67.5000x116.9134",
+		"57.0535x122.3516",
+		"46.1727x126.8585",
+		"34.9406x130.4000",
+		"23.4425x132.9490",
+		"11.7660x134.4863",
+		"0.0000x135.0000",
+		"-11.7660x134.4863",
+		"-23.4425x132.9490",
+		"-34.9406x130.4000",
+		"-46.1727x126.8585",
+		"-57.0535x122.3516",
+		"-67.5000x116.9134",
+		"-77.4328x110.5855",
+		"-86.7763x103.4160",
+		"-95.4594x95.4594",
+		"-103.4160x86.7763",
+		"-110.5855x77.4328",
+		"-116.9134x67.5000",
+		"-122.3516x57.0535",
+		"-126.8585x46.1727",
+		"-130.4000x34.9406",
+		"-132.9490x23.4425",
+		"-134.4863x11.7660",
+		"-135.0000x0.0000",
+		"-134.4863x-11.7660",
+		"-132.9490x-23.4425",
+		"-130.4000x-34.9406",
+		"-126.8585x-46.1727",
+		"-122.3516x-57.0535",
+		"-116.9134x-67.5000",
+		"-110.5855x-77.4328",
+		"-103.4160x-86.7763",
+		"-95.4594x-95.4594",
+		"-86.7763x-103.4160",
+		"-77.4328x-110.5855",
+		"-67.5000x-116.9134",
+		"-57.0535x-122.3516",
+		"-46.1727x-126.8585",
+		"-34.9406x-130.4000",
+		"-23.4425x-132.9490",
+		"-11.7660x-134.4863",
+		"-0.0000x-135.0000",
+		"11.7660x-134.4863",
+		"23.4425x-132.9490",
+		"34.9406x-130.4000",
+		"46.1727x-126.8585",
+		"57.0535x-122.3516",
+		"67.5000x-116.9134",
+		"77.4328x-110.5855",
+		"86.7763x-103.4160",
+		"95.4594x-95.4594",
+		"103.4160x-86.7763",
+		"110.5855x-77.4328",
+		"116.9134x-67.5000",
+		"122.3516x-57.0535",
+		"126.8585x-46.1727",
+		"130.4000x-34.9406",
+		"132.9490x-23.4425",
+		"134.4863x-11.7660"
+	],
+	"printable_height": "385",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC RostockMAX v3.2",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC RostockMAX v3.2 1.0 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "1.0",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC RostockMAX v3.2",
+	"thumbnail": "SeeMeCNC RostockMAX v3.2_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_4mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC RostockMAX v4 0.4 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "160",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"385"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC ROSTOCKMAX V4 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"200",
+		"200"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC ROSTOCKMAX V4 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 280mm bed) ---\nG92 E0\nG1 X-50 Y-124.8 Z0.4 F5000   ; Move to arc start (inside 140mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-124.8 R134.4 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-114.8 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.32"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.08"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "160",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"140.0000x0.0000",
+		"139.4673x12.2018",
+		"137.8731x24.3107",
+		"135.2296x36.2347",
+		"131.5570x47.8828",
+		"126.8831x59.1666",
+		"121.2436x70.0000",
+		"114.6813x80.3007",
+		"107.2462x89.9903",
+		"98.9949x98.9949",
+		"89.9903x107.2462",
+		"80.3007x114.6813",
+		"70.0000x121.2436",
+		"59.1666x126.8831",
+		"47.8828x131.5570",
+		"36.2347x135.2296",
+		"24.3107x137.8731",
+		"12.2018x139.4673",
+		"0.0000x140.0000",
+		"-12.2018x139.4673",
+		"-24.3107x137.8731",
+		"-36.2347x135.2296",
+		"-47.8828x131.5570",
+		"-59.1666x126.8831",
+		"-70.0000x121.2436",
+		"-80.3007x114.6813",
+		"-89.9903x107.2462",
+		"-98.9949x98.9949",
+		"-107.2462x89.9903",
+		"-114.6813x80.3007",
+		"-121.2436x70.0000",
+		"-126.8831x59.1666",
+		"-131.5570x47.8828",
+		"-135.2296x36.2347",
+		"-137.8731x24.3107",
+		"-139.4673x12.2018",
+		"-140.0000x0.0000",
+		"-139.4673x-12.2018",
+		"-137.8731x-24.3107",
+		"-135.2296x-36.2347",
+		"-131.5570x-47.8828",
+		"-126.8831x-59.1666",
+		"-121.2436x-70.0000",
+		"-114.6813x-80.3007",
+		"-107.2462x-89.9903",
+		"-98.9949x-98.9949",
+		"-89.9903x-107.2462",
+		"-80.3007x-114.6813",
+		"-70.0000x-121.2436",
+		"-59.1666x-126.8831",
+		"-47.8828x-131.5570",
+		"-36.2347x-135.2296",
+		"-24.3107x-137.8731",
+		"-12.2018x-139.4673",
+		"-0.0000x-140.0000",
+		"12.2018x-139.4673",
+		"24.3107x-137.8731",
+		"36.2347x-135.2296",
+		"47.8828x-131.5570",
+		"59.1666x-126.8831",
+		"70.0000x-121.2436",
+		"80.3007x-114.6813",
+		"89.9903x-107.2462",
+		"98.9949x-98.9949",
+		"107.2462x-89.9903",
+		"114.6813x-80.3007",
+		"121.2436x-70.0000",
+		"126.8831x-59.1666",
+		"131.5570x-47.8828",
+		"135.2296x-36.2347",
+		"137.8731x-24.3107",
+		"139.4673x-12.2018"
+	],
+	"printable_height": "385",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC RostockMAX v4",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC RostockMAX v4 0.4 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC RostockMAX v4",
+	"thumbnail": "SeeMeCNC RostockMAX v4_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_5mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC RostockMAX v4 0.5 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "160",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"385"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC ROSTOCKMAX V4 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"200",
+		"200"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC ROSTOCKMAX V4 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 280mm bed) ---\nG92 E0\nG1 X-50 Y-124.8 Z0.4 F5000   ; Move to arc start (inside 140mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-124.8 R134.4 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-114.8 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.40"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.10"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.5"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "160",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"140.0000x0.0000",
+		"139.4673x12.2018",
+		"137.8731x24.3107",
+		"135.2296x36.2347",
+		"131.5570x47.8828",
+		"126.8831x59.1666",
+		"121.2436x70.0000",
+		"114.6813x80.3007",
+		"107.2462x89.9903",
+		"98.9949x98.9949",
+		"89.9903x107.2462",
+		"80.3007x114.6813",
+		"70.0000x121.2436",
+		"59.1666x126.8831",
+		"47.8828x131.5570",
+		"36.2347x135.2296",
+		"24.3107x137.8731",
+		"12.2018x139.4673",
+		"0.0000x140.0000",
+		"-12.2018x139.4673",
+		"-24.3107x137.8731",
+		"-36.2347x135.2296",
+		"-47.8828x131.5570",
+		"-59.1666x126.8831",
+		"-70.0000x121.2436",
+		"-80.3007x114.6813",
+		"-89.9903x107.2462",
+		"-98.9949x98.9949",
+		"-107.2462x89.9903",
+		"-114.6813x80.3007",
+		"-121.2436x70.0000",
+		"-126.8831x59.1666",
+		"-131.5570x47.8828",
+		"-135.2296x36.2347",
+		"-137.8731x24.3107",
+		"-139.4673x12.2018",
+		"-140.0000x0.0000",
+		"-139.4673x-12.2018",
+		"-137.8731x-24.3107",
+		"-135.2296x-36.2347",
+		"-131.5570x-47.8828",
+		"-126.8831x-59.1666",
+		"-121.2436x-70.0000",
+		"-114.6813x-80.3007",
+		"-107.2462x-89.9903",
+		"-98.9949x-98.9949",
+		"-89.9903x-107.2462",
+		"-80.3007x-114.6813",
+		"-70.0000x-121.2436",
+		"-59.1666x-126.8831",
+		"-47.8828x-131.5570",
+		"-36.2347x-135.2296",
+		"-24.3107x-137.8731",
+		"-12.2018x-139.4673",
+		"-0.0000x-140.0000",
+		"12.2018x-139.4673",
+		"24.3107x-137.8731",
+		"36.2347x-135.2296",
+		"47.8828x-131.5570",
+		"59.1666x-126.8831",
+		"70.0000x-121.2436",
+		"80.3007x-114.6813",
+		"89.9903x-107.2462",
+		"98.9949x-98.9949",
+		"107.2462x-89.9903",
+		"114.6813x-80.3007",
+		"121.2436x-70.0000",
+		"126.8831x-59.1666",
+		"131.5570x-47.8828",
+		"135.2296x-36.2347",
+		"137.8731x-24.3107",
+		"139.4673x-12.2018"
+	],
+	"printable_height": "385",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC RostockMAX v4",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC RostockMAX v4 0.5 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.5",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC RostockMAX v4",
+	"thumbnail": "SeeMeCNC RostockMAX v4_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_7mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC RostockMAX v4 0.7 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "160",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"385"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC ROSTOCKMAX V4 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"200",
+		"200"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC ROSTOCKMAX V4 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 280mm bed) ---\nG92 E0\nG1 X-50 Y-124.8 Z0.4 F5000   ; Move to arc start (inside 140mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-124.8 R134.4 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-114.8 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.56"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.15"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"0.7"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "160",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"140.0000x0.0000",
+		"139.4673x12.2018",
+		"137.8731x24.3107",
+		"135.2296x36.2347",
+		"131.5570x47.8828",
+		"126.8831x59.1666",
+		"121.2436x70.0000",
+		"114.6813x80.3007",
+		"107.2462x89.9903",
+		"98.9949x98.9949",
+		"89.9903x107.2462",
+		"80.3007x114.6813",
+		"70.0000x121.2436",
+		"59.1666x126.8831",
+		"47.8828x131.5570",
+		"36.2347x135.2296",
+		"24.3107x137.8731",
+		"12.2018x139.4673",
+		"0.0000x140.0000",
+		"-12.2018x139.4673",
+		"-24.3107x137.8731",
+		"-36.2347x135.2296",
+		"-47.8828x131.5570",
+		"-59.1666x126.8831",
+		"-70.0000x121.2436",
+		"-80.3007x114.6813",
+		"-89.9903x107.2462",
+		"-98.9949x98.9949",
+		"-107.2462x89.9903",
+		"-114.6813x80.3007",
+		"-121.2436x70.0000",
+		"-126.8831x59.1666",
+		"-131.5570x47.8828",
+		"-135.2296x36.2347",
+		"-137.8731x24.3107",
+		"-139.4673x12.2018",
+		"-140.0000x0.0000",
+		"-139.4673x-12.2018",
+		"-137.8731x-24.3107",
+		"-135.2296x-36.2347",
+		"-131.5570x-47.8828",
+		"-126.8831x-59.1666",
+		"-121.2436x-70.0000",
+		"-114.6813x-80.3007",
+		"-107.2462x-89.9903",
+		"-98.9949x-98.9949",
+		"-89.9903x-107.2462",
+		"-80.3007x-114.6813",
+		"-70.0000x-121.2436",
+		"-59.1666x-126.8831",
+		"-47.8828x-131.5570",
+		"-36.2347x-135.2296",
+		"-24.3107x-137.8731",
+		"-12.2018x-139.4673",
+		"-0.0000x-140.0000",
+		"12.2018x-139.4673",
+		"24.3107x-137.8731",
+		"36.2347x-135.2296",
+		"47.8828x-131.5570",
+		"59.1666x-126.8831",
+		"70.0000x-121.2436",
+		"80.3007x-114.6813",
+		"89.9903x-107.2462",
+		"98.9949x-98.9949",
+		"107.2462x-89.9903",
+		"114.6813x-80.3007",
+		"121.2436x-70.0000",
+		"126.8831x-59.1666",
+		"131.5570x-47.8828",
+		"135.2296x-36.2347",
+		"137.8731x-24.3107",
+		"139.4673x-12.2018"
+	],
+	"printable_height": "385",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC RostockMAX v4",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC RostockMAX v4 0.7 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "0.7",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC RostockMAX v4",
+	"thumbnail": "SeeMeCNC RostockMAX v4_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_1_0mm.json

@@ -0,0 +1,351 @@
+{
+	"type": "machine",
+	"name": "SeeMeCNC RostockMAX v4 1.0 nozzle",
+	"from": "System",
+	"instantiation": "true",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bed_custom_model": "SeeMeCNC_Buildplate_Model.STL",
+	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
+	"bed_exclude_area": [
+		"0x0"
+	],
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"bed_temperature_formula": "by_first_filament",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "160",
+	"default_filament_profile": [
+		"SeeMeCNC PLA"
+	],
+	"default_nozzle_volume_type": [
+		"Standard"
+	],
+	"default_print_profile": "0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
+	"deretraction_speed": [
+		"60"
+	],
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"enable_power_loss_recovery": "printer_configuration",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "70",
+	"extruder_clearance_height_to_rod": "70",
+	"extruder_clearance_radius": "75",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"extruder_printable_area": [],
+	"extruder_printable_height": [
+		"385"
+	],
+	"extruder_type": [
+		"Bowden"
+	],
+	"extruder_variant_list": [
+		"Bowden Standard"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"file_start_gcode": "",
+	"gcode_flavor": "reprapfirmware",
+	"grab_length": [
+		"0"
+	],
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "duet",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": [
+		";======= SEEMECNC ROSTOCKMAX V4 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
+	],
+	"machine_load_filament_time": "4",
+	"machine_max_acceleration_e": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_extruding": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_retracting": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_travel": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_x": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_y": [
+		"5000",
+		"5000"
+	],
+	"machine_max_acceleration_z": [
+		"5000",
+		"5000"
+	],
+	"machine_max_jerk_e": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_x": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_y": [
+		"15",
+		"15"
+	],
+	"machine_max_jerk_z": [
+		"15",
+		"15"
+	],
+	"machine_max_junction_deviation": [
+		"0.01"
+	],
+	"machine_max_speed_e": [
+		"150",
+		"25"
+	],
+	"machine_max_speed_x": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_y": [
+		"300",
+		"300"
+	],
+	"machine_max_speed_z": [
+		"200",
+		"200"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": [
+		";======= SEEMECNC ROSTOCKMAX V4 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 280mm bed) ---\nG92 E0\nG1 X-50 Y-124.8 Z0.4 F5000   ; Move to arc start (inside 140mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-124.8 R134.4 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-114.8 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
+	],
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "4",
+	"manual_filament_change": "0",
+	"master_extruder_id": "1",
+	"max_layer_height": [
+		"0.80"
+	],
+	"max_resonance_avoidance_speed": "100",
+	"min_layer_height": [
+		"0.20"
+	],
+	"min_resonance_avoidance_speed": "50",
+	"nozzle_diameter": [
+		"1.0"
+	],
+	"nozzle_flush_dataset": [
+		"0"
+	],
+	"nozzle_height": "3.0",
+	"nozzle_hrc": "0",
+	"nozzle_type": [
+		"brass"
+	],
+	"nozzle_volume": [
+		"0"
+	],
+	"parking_pos_retraction": "160",
+	"pellet_modded_printer": "0",
+	"physical_extruder_map": [
+		"0"
+	],
+	"preferred_orientation": "0",
+	"printable_area": [
+		"140.0000x0.0000",
+		"139.4673x12.2018",
+		"137.8731x24.3107",
+		"135.2296x36.2347",
+		"131.5570x47.8828",
+		"126.8831x59.1666",
+		"121.2436x70.0000",
+		"114.6813x80.3007",
+		"107.2462x89.9903",
+		"98.9949x98.9949",
+		"89.9903x107.2462",
+		"80.3007x114.6813",
+		"70.0000x121.2436",
+		"59.1666x126.8831",
+		"47.8828x131.5570",
+		"36.2347x135.2296",
+		"24.3107x137.8731",
+		"12.2018x139.4673",
+		"0.0000x140.0000",
+		"-12.2018x139.4673",
+		"-24.3107x137.8731",
+		"-36.2347x135.2296",
+		"-47.8828x131.5570",
+		"-59.1666x126.8831",
+		"-70.0000x121.2436",
+		"-80.3007x114.6813",
+		"-89.9903x107.2462",
+		"-98.9949x98.9949",
+		"-107.2462x89.9903",
+		"-114.6813x80.3007",
+		"-121.2436x70.0000",
+		"-126.8831x59.1666",
+		"-131.5570x47.8828",
+		"-135.2296x36.2347",
+		"-137.8731x24.3107",
+		"-139.4673x12.2018",
+		"-140.0000x0.0000",
+		"-139.4673x-12.2018",
+		"-137.8731x-24.3107",
+		"-135.2296x-36.2347",
+		"-131.5570x-47.8828",
+		"-126.8831x-59.1666",
+		"-121.2436x-70.0000",
+		"-114.6813x-80.3007",
+		"-107.2462x-89.9903",
+		"-98.9949x-98.9949",
+		"-89.9903x-107.2462",
+		"-80.3007x-114.6813",
+		"-70.0000x-121.2436",
+		"-59.1666x-126.8831",
+		"-47.8828x-131.5570",
+		"-36.2347x-135.2296",
+		"-24.3107x-137.8731",
+		"-12.2018x-139.4673",
+		"-0.0000x-140.0000",
+		"12.2018x-139.4673",
+		"24.3107x-137.8731",
+		"36.2347x-135.2296",
+		"47.8828x-131.5570",
+		"59.1666x-126.8831",
+		"70.0000x-121.2436",
+		"80.3007x-114.6813",
+		"89.9903x-107.2462",
+		"98.9949x-98.9949",
+		"107.2462x-89.9903",
+		"114.6813x-80.3007",
+		"121.2436x-70.0000",
+		"126.8831x-59.1666",
+		"131.5570x-47.8828",
+		"135.2296x-36.2347",
+		"137.8731x-24.3107",
+		"139.4673x-12.2018"
+	],
+	"printable_height": "385",
+	"printer_agent": "",
+	"printer_extruder_id": [
+		"1"
+	],
+	"printer_extruder_variant": [
+		"Bowden Standard"
+	],
+	"printer_model": "SeeMeCNC RostockMAX v4",
+	"printer_notes": "",
+	"printer_settings_id": "SeeMeCNC RostockMAX v4 1.0 nozzle",
+	"printer_structure": "delta",
+	"printer_technology": "FFF",
+	"printer_variant": "1.0",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"resonance_avoidance": "0",
+	"retract_before_wipe": [
+		"70%"
+	],
+	"retract_length_toolchange": [
+		"3"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"2"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"6"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "0",
+	"support_object_skip_flush": "0",
+	"template_custom_gcode": "",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"wipe_tower_type": "type2",
+	"wrapping_detection_gcode": "",
+	"wrapping_detection_layers": "20",
+	"wrapping_exclude_area": [],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0",
+	"model": "SeeMeCNC RostockMAX v4",
+	"thumbnail": "SeeMeCNC RostockMAX v4_cover.png",
+	"description": "SeeMeCNC configurations"
+}

resources/profiles/SeeMeCNC/process/0.16mm Fine @SeeMeCNC Artemis 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.16mm Fine @SeeMeCNC Artemis 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.16mm Fine @SeeMeCNC Artemis 0.4",
+	"compatible_printers": [
+		"SeeMeCNC Artemis 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.16",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 300 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.16",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.16",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.16",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.16",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
+	"compatible_printers": [
+		"SeeMeCNC RostockMAX v3.2 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.16",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.16mm Fine @SeeMeCNC RostockMAX v4 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
+	"compatible_printers": [
+		"SeeMeCNC RostockMAX v4 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.16",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.20mm Draft @SeeMeCNC RostockMAX v3.2 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.20mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
+	"compatible_printers": [
+		"SeeMeCNC RostockMAX v3.2 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.2",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.20mm Fine @SeeMeCNC Artemis 0.5.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.20mm Fine @SeeMeCNC Artemis 0.5",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Fine @SeeMeCNC Artemis 0.5",
+	"compatible_printers": [
+		"SeeMeCNC Artemis 0.5 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.25",
+	"layer_height": "0.2",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1200",
+	"inner_wall_acceleration": "1200"
+}

resources/profiles/SeeMeCNC/process/0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 300 0.5 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.25",
+	"layer_height": "0.2",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1200",
+	"inner_wall_acceleration": "1200"
+}

resources/profiles/SeeMeCNC/process/0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.25",
+	"layer_height": "0.2",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1200",
+	"inner_wall_acceleration": "1200"
+}

resources/profiles/SeeMeCNC/process/0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.25",
+	"layer_height": "0.2",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1200",
+	"inner_wall_acceleration": "1200"
+}

resources/profiles/SeeMeCNC/process/0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.25",
+	"layer_height": "0.2",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1200",
+	"inner_wall_acceleration": "1200"
+}

resources/profiles/SeeMeCNC/process/0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
+	"compatible_printers": [
+		"SeeMeCNC RostockMAX v3.2 0.5 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.25",
+	"layer_height": "0.2",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1200",
+	"inner_wall_acceleration": "1200"
+}

resources/profiles/SeeMeCNC/process/0.20mm Fine @SeeMeCNC RostockMAX v4 0.5.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
+	"compatible_printers": [
+		"SeeMeCNC RostockMAX v4 0.5 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.25",
+	"layer_height": "0.2",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1200",
+	"inner_wall_acceleration": "1200"
+}

resources/profiles/SeeMeCNC/process/0.20mm Standard @SeeMeCNC Artemis 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.20mm Standard @SeeMeCNC Artemis 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Standard @SeeMeCNC Artemis 0.4",
+	"compatible_printers": [
+		"SeeMeCNC Artemis 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.2",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 300 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.2",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.2",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.2",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.2",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
+	"compatible_printers": [
+		"SeeMeCNC RostockMAX v3.2 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.2",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.20mm Standard @SeeMeCNC RostockMAX v4 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
+	"compatible_printers": [
+		"SeeMeCNC RostockMAX v4 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.2",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.24mm Draft @SeeMeCNC Artemis 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.24mm Draft @SeeMeCNC Artemis 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.24mm Draft @SeeMeCNC Artemis 0.4",
+	"compatible_printers": [
+		"SeeMeCNC Artemis 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.24",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 300 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.24",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.24",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.24",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.24",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
+	"compatible_printers": [
+		"SeeMeCNC RostockMAX v3.2 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.24",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.24mm Draft @SeeMeCNC RostockMAX v4 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
+	"compatible_printers": [
+		"SeeMeCNC RostockMAX v4 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.24",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.25mm Standard @SeeMeCNC Artemis 0.5.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.25mm Standard @SeeMeCNC Artemis 0.5",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.25mm Standard @SeeMeCNC Artemis 0.5",
+	"compatible_printers": [
+		"SeeMeCNC Artemis 0.5 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.25",
+	"layer_height": "0.25",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1200",
+	"inner_wall_acceleration": "1200"
+}

resources/profiles/SeeMeCNC/process/0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 300 0.5 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.25",
+	"layer_height": "0.25",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1200",
+	"inner_wall_acceleration": "1200"
+}

resources/profiles/SeeMeCNC/process/0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.25",
+	"layer_height": "0.25",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1200",
+	"inner_wall_acceleration": "1200"
+}

resources/profiles/SeeMeCNC/process/0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.25",
+	"layer_height": "0.25",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1200",
+	"inner_wall_acceleration": "1200"
+}

resources/profiles/SeeMeCNC/process/0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.25",
+	"layer_height": "0.25",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1200",
+	"inner_wall_acceleration": "1200"
+}

resources/profiles/SeeMeCNC/process/0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
+	"compatible_printers": [
+		"SeeMeCNC RostockMAX v3.2 0.5 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.25",
+	"layer_height": "0.25",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1200",
+	"inner_wall_acceleration": "1200"
+}

resources/profiles/SeeMeCNC/process/0.25mm Standard @SeeMeCNC RostockMAX v4 0.5.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
+	"compatible_printers": [
+		"SeeMeCNC RostockMAX v4 0.5 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.25",
+	"layer_height": "0.25",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1200",
+	"inner_wall_acceleration": "1200"
+}

resources/profiles/SeeMeCNC/process/0.28mm Extra Draft @SeeMeCNC Artemis 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
+	"compatible_printers": [
+		"SeeMeCNC Artemis 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.28",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 300 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.28",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.28",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}

resources/profiles/SeeMeCNC/process/0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4.json

@@ -0,0 +1,22 @@
+{
+	"type": "process",
+	"name": "0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
+	"inherits": "SeeMeCNC process base",
+	"from": "System",
+	"instantiation": "true",
+	"print_settings_id": "0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
+	"compatible_printers": [
+		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle"
+	],
+	"compatible_printers_condition": "",
+	"alternate_extra_wall": "0",
+	"counterbore_hole_bridging": "none",
+	"initial_layer_print_height": "0.2",
+	"layer_height": "0.28",
+	"precise_z_height": "0",
+	"skirt_distance": "2",
+	"skirt_loops": "0",
+	"spiral_mode": "0",
+	"outer_wall_acceleration": "1500",
+	"inner_wall_acceleration": "1500"
+}