Belt Printing: Bugfix: Solid Organic Tree Base, Slim Tree Skirt, Renderer (#14395)

* fix tree support brim
* treesupport3d part 1: more diagnostic logging.  (todo once things are fixed: remove this / gate it properly)
* make area under Z=0 in rotated slice pipeline not solid
* fix solid Z=0 layer for belt printers
* fix renderer
* clean up logging
* final review pass

.github/workflows/build_all.yml

@@ -5,6 +5,7 @@ on:
     branches:
      - main
      - release/*
+     - belt-printer
     paths:
      - 'deps/**'
      - 'src/**'
@@ -14,6 +15,8 @@ on:
      - 'resources/**'
      - ".github/workflows/build_*.yml"
      - 'scripts/flatpak/**'
+     - 'scripts/msix/**'
+     - 'tests/**'
 
   pull_request:
     branches:
@@ -30,6 +33,8 @@ on:
      - 'build_release_vs2022.bat'
      - 'build_release_macos.sh'
      - 'scripts/flatpak/**'
+     - 'scripts/msix/**'
+     - 'tests/**'
 
 
   schedule:
@@ -51,11 +56,23 @@ jobs:
   build_linux:
     strategy:
       fail-fast: false
+      # Build both arches on every event (PRs included), through the same
+      # build_check_cache -> build_deps -> build_orca chain (the AppImage).
+      # aarch64 always uses the GitHub-hosted arm runner (there is no arm
+      # self-hosted server). amd64's empty arch is load-bearing: it keeps the
+      # historical 'linux-clang' deps cache key and the unsuffixed asset names.
+      matrix:
+        include:
+          - arch: ""
+            os: ${{ vars.SELF_HOSTED && 'orca-lnx-server' || 'ubuntu-24.04' }}
+          - arch: "aarch64"
+            os: ubuntu-24.04-arm
     # Don't run scheduled builds on forks:
     if: ${{ !cancelled() && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
     uses: ./.github/workflows/build_check_cache.yml
     with:
-      os: ${{ vars.SELF_HOSTED && 'orca-lnx-server' || 'ubuntu-24.04' }}
+      os: ${{ matrix.os }}
+      arch: ${{ matrix.arch }}
       build-deps-only: ${{ inputs.build-deps-only || false }}
     secrets: inherit
   build_windows:
@@ -95,7 +112,9 @@ jobs:
     secrets: inherit
   unit_tests:
     name: Unit Tests
-    runs-on: ${{ vars.SELF_HOSTED && 'orca-lnx-server' || 'ubuntu-24.04' }}
+    # Tests are built on the aarch64 leg by default (faster GitHub arm runner),
+    # so run them there; self-hosted builds them on the amd64 server instead.
+    runs-on: ${{ vars.SELF_HOSTED && 'orca-lnx-server' || 'ubuntu-24.04-arm' }}
     needs: build_linux
     if: ${{ !cancelled() && success() }}
     steps:
@@ -142,7 +161,7 @@ jobs:
   flatpak:
     name: "Flatpak"
     container:
-      image: ghcr.io/flathub-infra/flatpak-github-actions:gnome-49
+      image: ghcr.io/flathub-infra/flatpak-github-actions:gnome-50
       options: --privileged
       volumes:
         - /usr/local/lib/android:/usr/local/lib/android
@@ -166,6 +185,9 @@ jobs:
       date:
       ver:
       ver_pure:
+      # Belt-printer nightlies share the main nightly release but carry a `_belt`
+      # suffix so they never overwrite the main assets.
+      nightly_suffix: ${{ github.ref == 'refs/heads/belt-printer' && '_belt' || '' }}
     steps:
     - name: "Remove unneeded stuff to free disk space"
       run:
@@ -224,13 +246,12 @@ jobs:
         name: OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
         path: '/__w/OrcaSlicer/OrcaSlicer/OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak'
     - name: Deploy Flatpak to nightly release
-      if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main'
+      if: github.repository == 'OrcaSlicer/OrcaSlicer' && (github.ref == 'refs/heads/main' || github.ref == 'refs/heads/belt-printer')
       uses: WebFreak001/deploy-nightly@v3.2.0
       with:
         upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
         release_id: 137995723
         asset_path: /__w/OrcaSlicer/OrcaSlicer/OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
-        asset_name: OrcaSlicer-Linux-flatpak_nightly_${{ matrix.variant.arch }}.flatpak
+        asset_name: OrcaSlicer-Linux-flatpak_nightly${{ env.nightly_suffix }}_${{ matrix.variant.arch }}.flatpak
         asset_content_type: application/octet-stream
         max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
-

.github/workflows/build_check_cache.yml

@@ -33,8 +33,10 @@ jobs:
       - name: set outputs
         id: set_outputs
         env:
-          # Keep macOS cache keys and paths architecture-specific.
-          cache-os: ${{ runner.os == 'macOS' && format('macos-{0}', inputs.arch) || (runner.os == 'Windows' && 'windows' || 'linux-clang') }}
+          # Keep macOS/Linux cache keys architecture-specific. amd64 Linux passes
+          # no arch (key stays 'linux-clang', preserving the existing cache);
+          # aarch64 gets its own 'linux-clang-aarch64' key.
+          cache-os: ${{ runner.os == 'macOS' && format('macos-{0}', inputs.arch) || (runner.os == 'Windows' && 'windows' || format('linux-clang{0}', inputs.arch && format('-{0}', inputs.arch) || '')) }}
           dep-folder-name: ${{ runner.os == 'macOS' && format('/{0}', inputs.arch) || '/OrcaSlicer_dep' }}
           output-cmd: ${{ runner.os == 'Windows' && '$env:GITHUB_OUTPUT' || '"$GITHUB_OUTPUT"'}}
         run: |

.github/workflows/build_orca.yml

@@ -29,6 +29,11 @@ jobs:
       ubuntu-ver: '2404'
       ubuntu-ver-str: '_Ubuntu2404'
       ORCA_UPDATER_SIG_KEY: ${{ secrets.ORCA_UPDATER_SIG_KEY }}
+      # Branches whose builds are published to the nightly release. The
+      # belt-printer branch ships alongside main but its assets carry a `_belt`
+      # suffix (nightly_suffix) so they never overwrite the main nightly assets.
+      deploy_nightly: ${{ github.ref == 'refs/heads/main' || github.ref == 'refs/heads/belt-printer' }}
+      nightly_suffix: ${{ github.ref == 'refs/heads/belt-printer' && '_belt' || '' }}
 
     steps:
       - name: Checkout
@@ -65,6 +70,11 @@ jobs:
           echo "ver_pure=$ver_pure" >> $GITHUB_ENV
           echo "date=$(date +'%Y%m%d')" >> $GITHUB_ENV
           echo "git_commit_hash=$git_commit_hash" >> $GITHUB_ENV
+          # Per-arch Linux AppImage naming: amd64 keeps the historical unsuffixed
+          # name (arch_suffix empty). Unused on macOS/Windows.
+          if [ '${{ inputs.arch }}' = 'aarch64' ]; then
+            echo "arch_suffix=_aarch64" >> $GITHUB_ENV
+          fi
         shell: bash
 
       - name: Get the version and date on Windows
@@ -153,17 +163,9 @@ jobs:
         run: |
           ./build_release_macos.sh -u -x ${{ !vars.SELF_HOSTED && '-1' || '' }} -a universal -t 10.15
 
-      - name: Delete intermediate per-arch artifacts
-        if: runner.os == 'macOS' && inputs.macos-combine-only
-        uses: geekyeggo/delete-artifact@v6
-        with:
-          name: |
-            OrcaSlicer_Mac_bundle_arm64_${{ github.sha }}
-            OrcaSlicer_Mac_bundle_x86_64_${{ github.sha }}
-
  # Thanks to RaySajuuk, it's working now
       - name: Sign app and notary
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && (github.ref == 'refs/heads/main' || startsWith(github.ref, 'refs/heads/release/')) && runner.os == 'macOS' && inputs.macos-combine-only
+        if: github.repository == 'OrcaSlicer/OrcaSlicer' && (github.ref == 'refs/heads/main' || github.ref == 'refs/heads/belt-printer' || startsWith(github.ref, 'refs/heads/release/')) && runner.os == 'macOS' && inputs.macos-combine-only
         working-directory: ${{ github.workspace }}
         env:
           BUILD_CERTIFICATE_BASE64: ${{ secrets.BUILD_CERTIFICATE_BASE64 }}
@@ -171,6 +173,8 @@ jobs:
           KEYCHAIN_PASSWORD: ${{ secrets.KEYCHAIN_PASSWORD }}
           CERTIFICATE_ID: ${{ secrets.MACOS_CERTIFICATE_ID }}
         run: |
+          # Load the `retry` helper (retries flaky commands such as `hdiutil create`).
+          source ${{ github.workspace }}/scripts/retry.sh
           CERTIFICATE_PATH=$RUNNER_TEMP/build_certificate.p12
           KEYCHAIN_PATH=$RUNNER_TEMP/app-signing.keychain-db
           echo -n "$BUILD_CERTIFICATE_BASE64" | base64 --decode --output $CERTIFICATE_PATH
@@ -193,7 +197,7 @@ jobs:
           rm -rf ${{ github.workspace }}/build/universal/OrcaSlicer_dmg/*
           cp -R ${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer.app ${{ github.workspace }}/build/universal/OrcaSlicer_dmg/
           ln -sfn /Applications ${{ github.workspace }}/build/universal/OrcaSlicer_dmg/Applications
-          hdiutil create -volname "OrcaSlicer" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_dmg -ov -format UDZO OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
+          retry hdiutil create -volname "OrcaSlicer" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_dmg -ov -format UDZO OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
           codesign --deep --force --verbose --options runtime --timestamp --entitlements ${{ github.workspace }}/scripts/disable_validation.entitlements --sign "$CERTIFICATE_ID" OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
           
           # Create separate OrcaSlicer_profile_validator DMG if the app exists
@@ -202,7 +206,7 @@ jobs:
             rm -rf ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/*
             cp -R ${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer_profile_validator.app ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/
             ln -sfn /Applications ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/Applications
-            hdiutil create -volname "OrcaSlicer Profile Validator" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg -ov -format UDZO OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
+            retry hdiutil create -volname "OrcaSlicer Profile Validator" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg -ov -format UDZO OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
             codesign --deep --force --verbose --options runtime --timestamp --entitlements ${{ github.workspace }}/scripts/disable_validation.entitlements --sign "$CERTIFICATE_ID" OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
           fi
           
@@ -217,14 +221,16 @@ jobs:
           fi
 
       - name: Create DMG without notary
-        if: github.ref != 'refs/heads/main' && runner.os == 'macOS' && inputs.macos-combine-only
+        if: github.ref != 'refs/heads/main' && github.ref != 'refs/heads/belt-printer' && runner.os == 'macOS' && inputs.macos-combine-only
         working-directory: ${{ github.workspace }}
         run: |
+          # Load the `retry` helper (retries flaky commands such as `hdiutil create`).
+          source ${{ github.workspace }}/scripts/retry.sh
           mkdir -p ${{ github.workspace }}/build/universal/OrcaSlicer_dmg
           rm -rf ${{ github.workspace }}/build/universal/OrcaSlicer_dmg/*
           cp -R ${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer.app ${{ github.workspace }}/build/universal/OrcaSlicer_dmg/
           ln -sfn /Applications ${{ github.workspace }}/build/universal/OrcaSlicer_dmg/Applications
-          hdiutil create -volname "OrcaSlicer" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_dmg -ov -format UDZO OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
+          retry hdiutil create -volname "OrcaSlicer" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_dmg -ov -format UDZO OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
           
           # Create separate OrcaSlicer_profile_validator DMG if the app exists
           if [ -f "${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer_profile_validator.app/Contents/MacOS/OrcaSlicer_profile_validator" ]; then
@@ -232,9 +238,19 @@ jobs:
             rm -rf ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/*
             cp -R ${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer_profile_validator.app ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/
             ln -sfn /Applications ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/Applications
-            hdiutil create -volname "OrcaSlicer Profile Validator" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg -ov -format UDZO OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
+            retry hdiutil create -volname "OrcaSlicer Profile Validator" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg -ov -format UDZO OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
           fi
 
+      # Delete the per-arch bundles only after signing/DMG creation succeeded, so a
+      # failed run keeps them available for a re-run instead of forcing a full rebuild.
+      - name: Delete intermediate per-arch artifacts
+        if: success() && runner.os == 'macOS' && inputs.macos-combine-only
+        uses: geekyeggo/delete-artifact@v6
+        with:
+          name: |
+            OrcaSlicer_Mac_bundle_arm64_${{ github.sha }}
+            OrcaSlicer_Mac_bundle_x86_64_${{ github.sha }}
+
       - name: Upload artifacts mac
         if: runner.os == 'macOS' && inputs.macos-combine-only
         uses: actions/upload-artifact@v7
@@ -251,13 +267,13 @@ jobs:
           if-no-files-found: ignore
 
       - name: Deploy Mac release
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && runner.os == 'macOS' && inputs.macos-combine-only && !vars.SELF_HOSTED
+        if: github.repository == 'OrcaSlicer/OrcaSlicer' && env.deploy_nightly == 'true' && runner.os == 'macOS' && inputs.macos-combine-only && !vars.SELF_HOSTED
         uses: WebFreak001/deploy-nightly@v3.2.0
         with:
           upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
           asset_path: ${{ github.workspace }}/OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
-          asset_name: OrcaSlicer_Mac_universal_nightly.dmg
+          asset_name: OrcaSlicer_Mac_universal_nightly${{ env.nightly_suffix }}.dmg
           asset_content_type: application/octet-stream
           max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
 
@@ -339,24 +355,24 @@ jobs:
           path: ${{ github.workspace }}/build/src/Release/OrcaSlicer_profile_validator.exe
 
       - name: Deploy Windows release portable
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && runner.os == 'Windows' && !vars.SELF_HOSTED
+        if: github.repository == 'OrcaSlicer/OrcaSlicer' && env.deploy_nightly == 'true' && runner.os == 'Windows' && !vars.SELF_HOSTED
         uses: WebFreak001/deploy-nightly@v3.2.0
         with:
           upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
           asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_${{ env.ver }}_portable.zip
-          asset_name: OrcaSlicer_Windows_nightly_portable.zip
+          asset_name: OrcaSlicer_Windows_nightly${{ env.nightly_suffix }}_portable.zip
           asset_content_type: application/x-zip-compressed
           max_releases: 1
 
       - name: Deploy Windows release installer
-        if: github.repository == 'OrcaSlicer/OrcaSlicer' && github.ref == 'refs/heads/main' && runner.os == 'Windows' && !vars.SELF_HOSTED
+        if: github.repository == 'OrcaSlicer/OrcaSlicer' && env.deploy_nightly == 'true' && runner.os == 'Windows' && !vars.SELF_HOSTED
         uses: WebFreak001/deploy-nightly@v3.2.0
         with:
           upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
           asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_Installer_${{ env.ver }}.exe
-          asset_name: OrcaSlicer_Windows_Installer_nightly.exe
+          asset_name: OrcaSlicer_Windows_Installer_nightly${{ env.nightly_suffix }}.exe
           asset_content_type: application/x-msdownload
           max_releases: 1
 
@@ -371,6 +387,25 @@ jobs:
           asset_content_type: application/x-msdownload
           max_releases: 1
 
+      - name: Build MSIX Store package Win
+        if: runner.os == 'Windows' && !vars.SELF_HOSTED
+        working-directory: ${{ github.workspace }}
+        shell: pwsh
+        run: |
+          ./scripts/msix/build_msix.ps1 `
+            -InstallDir "${{ github.workspace }}/build/OrcaSlicer" `
+            -OutputPath "${{ github.workspace }}/build/OrcaSlicer_Windows_MSIX_${{ env.ver }}.msix" `
+            -IdentityName "${{ vars.ORCA_MSIX_IDENTITY_NAME || 'OrcaSlicer.OrcaSlicer' }}" `
+            -Publisher "${{ vars.ORCA_MSIX_PUBLISHER || 'CN=38F7EA55-C73B-4072-B3B2-C8E0EA15BB82' }}" `
+            -PublisherDisplayName "${{ vars.ORCA_MSIX_PUBLISHER_DISPLAY_NAME || 'OrcaSlicer' }}"
+
+      - name: Upload artifacts Win MSIX
+        if: runner.os == 'Windows' && !vars.SELF_HOSTED
+        uses: actions/upload-artifact@v7
+        with:
+          name: OrcaSlicer_Windows_MSIX_${{ env.ver }}
+          path: ${{ github.workspace }}/build/OrcaSlicer_Windows_MSIX_${{ env.ver }}.msix
+
 # Ubuntu
       - name: Apt-Install Dependencies
         if: runner.os == 'Linux' && !vars.SELF_HOSTED
@@ -382,16 +417,23 @@ jobs:
         if: runner.os == 'Linux'
         shell: bash
         run: |
-          ./build_linux.sh -istrlL
+          # Build + tar the unit tests (-t) only on the leg that runs them: the
+          # aarch64 leg by default (faster GitHub arm runner), or amd64 when using
+          # self-hosted runners (no arm self-hosted server). unit_tests downloads
+          # this tarball. The profile validator is built with -s, so amd64 keeps it.
+          tests=${{ (!vars.SELF_HOSTED && inputs.arch == 'aarch64') || (vars.SELF_HOSTED && inputs.arch != 'aarch64') }}
+          if $tests; then flags=-istrlL; else flags=-isrlL; fi
+          ./build_linux.sh "$flags"
           ./scripts/check_appimage_libs.sh ./build/package ./build/package/bin/orca-slicer
-          mv -n ./build/OrcaSlicer_Linux_V${{ env.ver_pure }}.AppImage ./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
-          chmod +x ./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
-          tar -cvpf build_tests.tar build/tests
+          appimage=./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}${{ env.arch_suffix }}_${{ env.ver }}.AppImage
+          mv -n ./build/OrcaSlicer_Linux_V${{ env.ver_pure }}.AppImage "$appimage"
+          chmod +x "$appimage"
+          if $tests; then tar -cvpf build_tests.tar build/tests; fi
 
         # Use tar because upload-artifacts won't always preserve directory structure
         # and doesn't preserve file permissions
       - name: Upload Test Artifact
-        if: runner.os == 'Linux'
+        if: runner.os == 'Linux' && ((!vars.SELF_HOSTED && inputs.arch == 'aarch64') || (vars.SELF_HOSTED && inputs.arch != 'aarch64'))
         uses: actions/upload-artifact@v7
         with:
           name: ${{ github.sha }}-tests
@@ -401,7 +443,7 @@ jobs:
           if-no-files-found: error
 
       - name: Run external slicer regression tests
-        if: runner.os == 'Linux'
+        if: runner.os == 'Linux' && inputs.arch != 'aarch64'
         timeout-minutes: 20
         shell: bash
         run: |
@@ -411,7 +453,7 @@ jobs:
           python3 "$test_repo_dir/run_test.py" "${{ github.workspace }}/build/package/bin/orca-slicer"
 
       - name: Build orca_custom_preset_tests
-        if: github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED
+        if: github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED && inputs.arch != 'aarch64'
         working-directory: ${{ github.workspace }}/build/src/Release
         shell: bash
         run: |
@@ -423,28 +465,28 @@ jobs:
         if: ${{ ! env.ACT && runner.os == 'Linux' }}
         uses: actions/upload-artifact@v7
         with:
-          name: OrcaSlicer_Linux_ubuntu_${{ env.ubuntu-ver }}_${{ env.ver }}
-          path: './build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage'
+          name: OrcaSlicer_Linux_ubuntu_${{ env.ubuntu-ver }}${{ env.arch_suffix }}_${{ env.ver }}
+          path: "./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}${{ env.arch_suffix }}_${{ env.ver }}.AppImage"
 
       - name: Upload OrcaSlicer_profile_validator Ubuntu
-        if: ${{ ! env.ACT && runner.os == 'Linux' && !vars.SELF_HOSTED }}
+        if: ${{ ! env.ACT && runner.os == 'Linux' && !vars.SELF_HOSTED && inputs.arch != 'aarch64' }}
         uses: actions/upload-artifact@v7
         with:
           name: OrcaSlicer_profile_validator_Linux_ubuntu_${{ env.ubuntu-ver }}_${{ env.ver }}
           path: './build/src/Release/OrcaSlicer_profile_validator'
 
       - name: Deploy Ubuntu release
-        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED }}
+        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && env.deploy_nightly == 'true' && runner.os == 'Linux' && !vars.SELF_HOSTED }}
         uses: WebFreak001/deploy-nightly@v3.2.0
         with:
           upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
-          asset_path: ./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
-          asset_name: OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_nightly.AppImage
+          asset_path: ./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}${{ env.arch_suffix }}_${{ env.ver }}.AppImage
+          asset_name: OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}${{ env.arch_suffix }}_nightly${{ env.nightly_suffix }}.AppImage
           asset_content_type: application/octet-stream
           max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
       - name: Deploy Ubuntu release
-        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED }}
+        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED && inputs.arch != 'aarch64' }}
         uses: rickstaa/action-create-tag@v1
         with:
           tag: "nightly-builds"
@@ -453,7 +495,7 @@ jobs:
           message: "nightly-builds"
 
       - name: Deploy Ubuntu OrcaSlicer_profile_validator release
-        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED }}
+        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED && inputs.arch != 'aarch64' }}
         uses: WebFreak001/deploy-nightly@v3.2.0
         with:
           upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
@@ -464,7 +506,7 @@ jobs:
           max_releases: 1
 
       - name: Deploy orca_custom_preset_tests
-        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED }}
+        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED && inputs.arch != 'aarch64' }}
         uses: WebFreak001/deploy-nightly@v3.2.0
         with:
           upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}

.github/workflows/check_profiles.yml

@@ -34,46 +34,6 @@ jobs:
           python3 ./scripts/orca_extra_profile_check.py 2>&1 | tee ${{ runner.temp }}/extra_json_check.log
           exit ${PIPESTATUS[0]}
 
-      - name: Check profile indentation
-        id: indentation_check
-        continue-on-error: true
-        run: |
-          set +e
-          python3 - <<'PY' 2>&1 | tee ${{ runner.temp }}/indentation_check.log
-          import re
-          from pathlib import Path
-          import sys
-
-          profiles_root = Path("resources/profiles")
-          invalid_files = []
-
-          for file_path in sorted(profiles_root.rglob("*.json")):
-            try:
-              for line_number, line in enumerate(file_path.read_text(encoding="utf-8").splitlines(), start=1):
-                if not line.strip():
-                  continue
-                leading_ws = re.match(r"^[ \t]*", line).group(0)
-                if " " in leading_ws:
-                  invalid_files.append((file_path, line_number))
-                  break
-            except Exception as exc:
-              print(f"[ERROR] Unable to read {file_path}: {exc}")
-              invalid_files.append((file_path, 0))
-
-          if invalid_files:
-            for path, line in invalid_files:
-              if line > 0:
-                print(f"[ERROR] Space indentation found in {path}:{line}")
-              else:
-                print(f"[ERROR] Could not validate indentation in {path}")
-            print("Use tab indentation in profile JSON files (1 tab per indentation level).")
-            print("Tip: run python3 ./scripts/orca_filament_lib.py --fix --force to normalize formatting.")
-            sys.exit(1)
-
-          print("All profile JSON files use tab-only indentation.")
-          PY
-          exit ${PIPESTATUS[0]}
-
       # download
       - name: Download
         working-directory: ${{ github.workspace }}
@@ -101,12 +61,18 @@ jobs:
           ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 2>&1 | tee ${{ runner.temp }}/validate_custom.log
           exit ${PIPESTATUS[0]}
 
-      - name: Prepare comment artifact
-        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.indentation_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+      - name: Prepare PR number for comment workflow
+        if: ${{ always() && github.event_name == 'pull_request' }}
         run: |
           mkdir -p ${{ runner.temp }}/profile-check-results
+          echo "${{ github.event.pull_request.number }}" > ${{ runner.temp }}/profile-check-results/pr_number.txt
 
+      - name: Prepare comment artifact
+        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        run: |
           {
+            # Marker matched by check_profiles_comment.yml to delete prior comments.
+            echo "<!-- profile-validation-comment -->"
             echo "## :x: Profile Validation Errors"
             echo ""
 
@@ -119,15 +85,6 @@ jobs:
               echo ""
             fi
 
-            if [ "${{ steps.indentation_check.outcome }}" = "failure" ]; then
-              echo "### Indentation Check Failed"
-              echo ""
-              echo '```'
-              head -c 30000 ${{ runner.temp }}/indentation_check.log || echo "No output captured"
-              echo '```'
-              echo ""
-            fi
-
             if [ "${{ steps.validate_system.outcome }}" = "failure" ]; then
               echo "### System Profile Validation Failed"
               echo ""
@@ -150,10 +107,8 @@ jobs:
             echo "*Please fix the above errors and push a new commit.*"
           } > ${{ runner.temp }}/profile-check-results/pr_comment.md
 
-          echo "${{ github.event.pull_request.number }}" > ${{ runner.temp }}/profile-check-results/pr_number.txt
-
       - name: Upload comment artifact
-        if: ${{ always() && github.event_name == 'pull_request' && (steps.extra_json_check.outcome == 'failure' || steps.indentation_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && github.event_name == 'pull_request' }}
         uses: actions/upload-artifact@v7
         with:
           name: profile-check-results
@@ -161,7 +116,7 @@ jobs:
           retention-days: 1
 
       - name: Fail if any check failed
-        if: ${{ always() && (steps.extra_json_check.outcome == 'failure' || steps.indentation_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
+        if: ${{ always() && (steps.extra_json_check.outcome == 'failure' || steps.validate_system.outcome == 'failure' || steps.validate_custom.outcome == 'failure') }}
         run: |
           echo "One or more profile checks failed. See above for details."
           exit 1

.github/workflows/check_profiles_comment.yml

@@ -10,12 +10,19 @@ on:
 
 permissions:
   pull-requests: write
+  # Needed to delete outdated bot comments via the issues/comments endpoint.
+  issues: write
+
+# Serialize handlers per source branch so parallel runs don't race delete-and-post.
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.workflow_run.head_repository.full_name }}-${{ github.event.workflow_run.head_branch }}
+  cancel-in-progress: false
 
 jobs:
   post_comment:
     name: Post PR comment
     runs-on: ubuntu-24.04
-    if: ${{ github.event.workflow_run.event == 'pull_request' && github.event.workflow_run.conclusion == 'failure' }}
+    if: ${{ github.event.workflow_run.event == 'pull_request' && (github.event.workflow_run.conclusion == 'success' || github.event.workflow_run.conclusion == 'failure') }}
     steps:
       - name: Download artifact
         id: download
@@ -26,14 +33,14 @@ jobs:
           run-id: ${{ github.event.workflow_run.id }}
           github-token: ${{ github.token }}
 
-      - name: Post comment on PR
+      - name: Update PR comment
         if: ${{ steps.download.outcome == 'success' }}
         env:
           GH_TOKEN: ${{ github.token }}
           GH_REPO: ${{ github.repository }}
         run: |
-          if [ ! -f pr_number.txt ] || [ ! -f pr_comment.md ]; then
-            echo "No comment artifact found, skipping."
+          if [ ! -f pr_number.txt ]; then
+            echo "No pr_number.txt in artifact, skipping."
             exit 0
           fi
 
@@ -43,4 +50,17 @@ jobs:
             exit 1
           fi
 
-          gh pr comment "$PR_NUMBER" --body-file pr_comment.md
+          # Delete prior comments matching the marker (from check_profiles.yml) or the legacy heading.
+          OLD_IDS=$(gh api --paginate "repos/${GH_REPO}/issues/${PR_NUMBER}/comments" \
+            --jq '.[] | select(.user.login == "github-actions[bot]") | select((.body | startswith("<!-- profile-validation-comment -->")) or (.body | startswith("## :x: Profile Validation Errors"))) | .id')
+          for comment_id in $OLD_IDS; do
+            echo "Deleting outdated profile-validation comment ${comment_id}"
+            gh api -X DELETE "repos/${GH_REPO}/issues/comments/${comment_id}" || true
+          done
+
+          # Post a new comment only when validation failed (pr_comment.md present).
+          if [ -f pr_comment.md ]; then
+            gh pr comment "$PR_NUMBER" --body-file pr_comment.md
+          else
+            echo "Validation succeeded; cleaned up prior comments without posting."
+          fi

.github/workflows/pr-label-bot.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Ask PR author for label
-        uses: actions/github-script@v7
+        uses: actions/github-script@v9
         with:
           script: |
             function isPermissionDenied(error) {
@@ -88,7 +88,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Apply label command from PR author
-        uses: actions/github-script@v7
+        uses: actions/github-script@v9
         with:
           script: |
             function isPermissionDenied(error) {

.github/workflows/publish_release.yml

@@ -0,0 +1,128 @@
+name: Publish to draft release
+
+# Manually pulls the platform binaries produced by a "Build all" run and uploads
+# them to an existing DRAFT release. Decoupled from the build so you can test a
+# build first, then publish exactly that run's artifacts once you're happy.
+#
+# Trigger: Actions tab -> "Publish to draft release" -> Run workflow.
+# Locked to a single person: the first step aborts unless the actor matches the
+# `RELEASE_PUBLISHER` repo variable (set to "SoftFever"). To allow someone else,
+# change that variable: gh variable set RELEASE_PUBLISHER --body "<login>".
+
+on:
+  workflow_dispatch:
+    inputs:
+      run_id:
+        description: 'Run ID of the "Build all" workflow to pull binaries from (the number in the Actions run URL)'
+        required: true
+        type: string
+      tag:
+        description: 'Tag of the draft release to upload to (e.g. v2.4.0-beta)'
+        required: true
+        type: string
+
+permissions:
+  contents: write   # upload release assets
+  actions: read     # download artifacts from another run
+
+jobs:
+  publish:
+    name: Publish binaries to draft release
+    runs-on: ubuntu-latest
+    env:
+      GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      RUN_ID: ${{ inputs.run_id }}
+      TAG: ${{ inputs.tag }}
+    steps:
+      - name: Restrict to the release publisher
+        env:
+          PUBLISHER: ${{ vars.RELEASE_PUBLISHER }}
+        run: |
+          if [ -z "$PUBLISHER" ]; then
+            echo "::error::RELEASE_PUBLISHER repo variable is not set."
+            exit 1
+          fi
+          if [ "${{ github.actor }}" != "$PUBLISHER" ]; then
+            echo "::error::Only @$PUBLISHER may run this workflow (you are @${{ github.actor }})."
+            exit 1
+          fi
+          echo "Authorized: @${{ github.actor }}"
+
+      - name: Verify target is a draft release
+        run: |
+          if ! gh release view "$TAG" --repo "$GITHUB_REPOSITORY" --json isDraft >/dev/null 2>&1; then
+            echo "::error::Release '$TAG' not found. Create the draft (with this tag) first."
+            exit 1
+          fi
+          is_draft=$(gh release view "$TAG" --repo "$GITHUB_REPOSITORY" --json isDraft --jq '.isDraft')
+          if [ "$is_draft" != "true" ]; then
+            echo "::error::Release '$TAG' is published, not a draft. Aborting to avoid touching a live release."
+            exit 1
+          fi
+
+      - name: Verify source build run
+        run: |
+          info=$(gh run view "$RUN_ID" --repo "$GITHUB_REPOSITORY" --json workflowName,conclusion,headBranch)
+          name=$(echo "$info" | jq -r '.workflowName')
+          conclusion=$(echo "$info" | jq -r '.conclusion')
+          branch=$(echo "$info" | jq -r '.headBranch')
+          echo "Source run #$RUN_ID: '$name' on '$branch' (conclusion: $conclusion)"
+          if [ "$conclusion" != "success" ]; then
+            echo "::warning::Source run did not conclude 'success' ($conclusion). Some assets may be missing."
+          fi
+
+      - name: Download release artifacts from build run
+        run: |
+          # Windows_V* (not Windows_*) keeps the MSIX Store artifact out: it goes to Partner Center, not GitHub releases.
+          gh run download "$RUN_ID" --repo "$GITHUB_REPOSITORY" --dir artifacts \
+            -p 'OrcaSlicer_Windows_V*' \
+            -p 'OrcaSlicer_Mac_universal_*' \
+            -p 'OrcaSlicer_Linux_ubuntu_*' \
+            -p 'OrcaSlicer-Linux-flatpak_*' \
+            -p 'PDB'
+          echo "Downloaded artifact folders:"
+          ls -1 artifacts
+
+      - name: Assemble release assets
+        run: |
+          set -euo pipefail
+          mkdir -p upload
+
+          # gh run download auto-extracts each artifact into a folder, so the inner
+          # binaries are already unzipped. Copy the inner binary for each platform.
+          # -type f is required (some artifact *folders* are named "*.flatpak").
+
+          # Windows installer: the .exe inside the installer artifact, NOT the
+          # orca-slicer.exe that lives in the portable app folder.
+          find artifacts -type f -name '*.exe' -path '*OrcaSlicer_Windows_*' ! -path '*_portable*' -exec cp -v {} upload/ \;
+          # macOS universal DMG (profile-validator DMG isn't downloaded).
+          find artifacts -type f -name '*.dmg' -path '*OrcaSlicer_Mac_universal_*' -exec cp -v {} upload/ \;
+          # Linux AppImage.
+          find artifacts -type f -name '*.AppImage' -exec cp -v {} upload/ \;
+          # Flatpak bundles (x86_64 + aarch64).
+          find artifacts -type f -name '*.flatpak' -exec cp -v {} upload/ \;
+          # Windows debug symbols (PDB archive, for developers).
+          find artifacts -type f -name 'Debug_PDB_*.7z' -exec cp -v {} upload/ \;
+
+          # Portable Windows build is an unzipped folder artifact; re-zip it to the
+          # released filename (this one stays a .zip on the release).
+          portable_dir=$(find artifacts -maxdepth 1 -type d -name 'OrcaSlicer_Windows_*_portable' | head -n1)
+          if [ -n "${portable_dir:-}" ]; then
+            ( cd "$portable_dir" && zip -qr "$GITHUB_WORKSPACE/upload/$(basename "$portable_dir").zip" . )
+            echo "Zipped portable -> $(basename "$portable_dir").zip"
+          else
+            echo "::warning::Windows portable artifact not found."
+          fi
+
+          echo "Assets to upload:"
+          ls -lh upload
+          if [ -z "$(ls -A upload)" ]; then
+            echo "::error::No assets assembled. Check the run_id and that its artifacts haven't expired."
+            exit 1
+          fi
+
+      - name: Upload assets to draft release
+        run: |
+          gh release upload "$TAG" upload/* --repo "$GITHUB_REPOSITORY" --clobber
+          echo "Uploaded to draft release: $TAG"
+          gh release view "$TAG" --repo "$GITHUB_REPOSITORY" --json assets --jq '.assets[].name'

CMakeLists.txt

@@ -220,7 +220,9 @@ if (MSVC)
     # /bigobj (Increase Number of Sections in .Obj file)
     # error C3859: virtual memory range for PCH exceeded; please recompile with a command line option of '-Zm90' or greater
     # Generate symbols at every build target, even for the release.
-    add_compile_options(-bigobj -Zm520 /Zi)
+	# -Zm520 fixes error C3859 but forces the compiler to pre-allocate that memory for every translation unit regardless
+	# combining /Zi with /FS frees up a significant amount of memory pressure across all parallel compile jobs and makes /MP faster overall.
+    add_compile_options(-bigobj /Zi /FS)
     # Disable STL4007: Many result_type typedefs and all argument_type, first_argument_type, and second_argument_type typedefs are deprecated in C++17.
     #FIXME Remove this line after eigen library adapts to the new C++17 adaptor rules.
     add_compile_options(-D_SILENCE_CXX17_ADAPTOR_TYPEDEFS_DEPRECATION_WARNING)
@@ -231,6 +233,11 @@ if (MSVC)
     # Disable warnings on comparison of unsigned and signed
     # C4018: signed/unsigned mismatch
     add_compile_options(/wd4018)
+    # Prevent linker restart when TBB (or other deps) built with /GL are linked
+	# Make your full (clean) build slower because it enables link-time code generation across all translation units.
+	# helps incremental builds by preventing the double-link restart from TBB
+    set(CMAKE_EXE_LINKER_FLAGS    "${CMAKE_EXE_LINKER_FLAGS} /LTCG")
+    set(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} /LTCG")
 endif ()
 
 if (${CMAKE_CXX_COMPILER_ID} STREQUAL "AppleClang" AND ${CMAKE_CXX_COMPILER_VERSION} VERSION_GREATER 15)
@@ -934,9 +941,6 @@ set (CPACK_PACKAGE_ICON "${CMAKE_SOURCE_DIR}/resources/images\\\\OrcaSlicer.ico"
 set (CPACK_NSIS_MUI_ICON "${CPACK_PACKAGE_ICON}")
 set (CPACK_NSIS_MUI_UNIICON "${CPACK_PACKAGE_ICON}")
 set (CPACK_NSIS_INSTALLED_ICON_NAME  "$INSTDIR\\\\orca-slicer.exe")
-set(CPACK_NSIS_EXTRA_INSTALL_COMMANDS "
-    CreateShortCut \\\"$DESKTOP\\\\OrcaSlicer.lnk\\\" \\\"$INSTDIR\\\\orca-slicer.exe\\\"
-")
 set (CPACK_PACKAGE_CHECKSUM SHA256)
 set (CPACK_PACKAGE_INSTALL_REGISTRY_KEY "OrcaSlicer")
 set (CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL ON)

README.md

@@ -15,15 +15,20 @@ Optimize your prints with ultra-fast slicing, intelligent support generation, an
 # Official links and community
 
 #### Official Website:
+
 <a href="https://www.orcaslicer.com/" style="font-size:2em;">OrcaSlicer.com</a>
 
 #### Github Repository:
+
 <a href="https://github.com/OrcaSlicer/OrcaSlicer"><img src="https://img.shields.io/badge/OrcaSlicer-181717?style=flat&logo=github&logoColor=white" width="200" alt="GitHub Logo"/> </a>
 
 #### Follow us:
-<a href="https://twitter.com/real_OrcaSlicer"><img src="https://img.shields.io/badge/real__OrcaSlicer-000000?style=flat&logo=x&logoColor=white" width="200" alt="X Logo"/> </a>
+
+<a href="https://twitter.com/real_OrcaSlicer"><img src="https://img.shields.io/badge/real__OrcaSlicer-000000?style=flat&logo=x&logoColor=white" width="200" alt="X Logo"/> </a>  
+<a href="https://www.youtube.com/@OfficialOrcaSlicer"><img src="https://img.shields.io/badge/OfficialOrcaSlicer-FF0000?style=flat&logo=youtube&logoColor=white" width="200" alt="YouTube Logo"/> </a>
 
 #### Join our Discord community:
+
 <a href="https://discord.gg/P4VE9UY9gJ"><img src="https://img.shields.io/badge/-Discord-5865F2?style=flat&logo=discord&logoColor=fff" width="200" alt="discord logo"/> </a>
 
 <table border="2" style="border-color: #ffa500; background-color:rgb(232, 220, 180); color: #856404;">
@@ -91,17 +96,17 @@ Explore the latest developments in OrcaSlicer with our nightly builds. Feedback
 
 Download the **Windows Installer exe**  for your preferred version from the [releases page](https://github.com/OrcaSlicer/OrcaSlicer/releases).
 
- - *For convenience there is also a portable build available.*
+- *For convenience there is also a portable build available.*
     <details>
     <summary>Troubleshooting</summary>
 
-    - *If you have troubles to run the build, you might need to install following runtimes:*
-    - [MicrosoftEdgeWebView2RuntimeInstallerX64](https://github.com/OrcaSlicer/OrcaSlicer/releases/download/v1.0.10-sf2/MicrosoftEdgeWebView2RuntimeInstallerX64.exe)
-        - [Details of this runtime](https://aka.ms/webview2)
-        - [Alternative Download Link Hosted by Microsoft](https://go.microsoft.com/fwlink/p/?LinkId=2124703)
-    - [vcredist2019_x64](https://github.com/OrcaSlicer/OrcaSlicer/releases/download/v1.0.10-sf2/vcredist2019_x64.exe)
-        -  [Alternative Download Link Hosted by Microsoft](https://aka.ms/vs/17/release/vc_redist.x64.exe)
-        -  This file may already be available on your computer if you've installed visual studio.  Check the following location: `%VCINSTALLDIR%Redist\MSVC\v142`
+  - *If you have troubles to run the build, you might need to install following runtimes:*
+  - [MicrosoftEdgeWebView2RuntimeInstallerX64](https://github.com/OrcaSlicer/OrcaSlicer/releases/download/v1.0.10-sf2/MicrosoftEdgeWebView2RuntimeInstallerX64.exe)
+    - [Details of this runtime](https://aka.ms/webview2)
+    - [Alternative Download Link Hosted by Microsoft](https://go.microsoft.com/fwlink/p/?LinkId=2124703)
+  - [vcredist2019_x64](https://github.com/OrcaSlicer/OrcaSlicer/releases/download/v1.0.10-sf2/vcredist2019_x64.exe)
+    - [Alternative Download Link Hosted by Microsoft](https://aka.ms/vs/17/release/vc_redist.x64.exe)
+    - This file may already be available on your computer if you've installed visual studio.  Check the following location: `%VCINSTALLDIR%Redist\MSVC\v142`
     </details>
 
 Windows Package Manager
@@ -137,9 +142,10 @@ winget install --id=SoftFever.OrcaSlicer -e
             ![mac_security_setting](./SoftFever_doc/mac_security_setting.png)
     </details>
 
-## Linux         
+## Linux
 
 ### Flathub (Recommended)
+
 OrcaSlicer is available through FlatHub:
 
 <a href='https://flathub.org/apps/com.orcaslicer.OrcaSlicer'><img width='240' alt='Download on Flathub' src='https://dl.flathub.org/assets/badges/flathub-badge-en.png'/></a>
@@ -154,6 +160,9 @@ flatpak run com.orcaslicer.OrcaSlicer
 It can also be installed through graphical software managers (KDE Discover, GNOME Software, etc.) when Flathub is enabled. Search for **OrcaSlicer** in your software center.
 
 ### AppImage
+
+AppImages are published for both **x86_64** and **aarch64** (ARM64). Pick the file matching your CPU — the ARM64 build has `aarch64` in its name (e.g. `OrcaSlicer_Linux_AppImage_Ubuntu2404_aarch64_*.AppImage`).
+
  1. Download App image from the [releases page](https://github.com/OrcaSlicer/OrcaSlicer/releases).
  2. Double click the downloaded file to run it.
 
@@ -185,7 +194,7 @@ resolution: 0.1
 Their generous support enables me to purchase filaments and other essential 3D printing materials for the project.  
 Thank you! :)
 
-## Sponsors:
+## Sponsors
 
 <table>
 <tr>
@@ -208,8 +217,8 @@ Thank you! :)
 
 ## Support me
 
-<a href="https://github.com/sponsors/SoftFever"><img src="https://img.shields.io/badge/GitHub%20Sponsors-30363D?style=flat&logo=GitHub-Sponsors&logoColor=EA4AAA" height="50"></a>
-<a href="https://ko-fi.com/G2G5IP3CP"><img src="https://img.shields.io/badge/Support_me_on_Ko--fi-FF5E5B?style=flat&logo=ko-fi&logoColor=white" height="50"></a>
+<a href="https://github.com/sponsors/SoftFever"><img src="https://img.shields.io/badge/GitHub%20Sponsors-30363D?style=flat&logo=GitHub-Sponsors&logoColor=EA4AAA" height="50"></a>  
+<a href="https://ko-fi.com/G2G5IP3CP"><img src="https://img.shields.io/badge/Support_me_on_Ko--fi-FF5E5B?style=flat&logo=ko-fi&logoColor=white" height="50"></a>  
 <a href="https://paypal.me/softfever3d"><img src="https://img.shields.io/badge/PayPal-003087?style=flat&logo=paypal&logoColor=fff" height="50"></a>
 
 ## Some Background
@@ -221,6 +230,7 @@ OrcaSlicer began in that same spirit, drawing from BambuStudio, PrusaSlicer, and
 The OrcaSlicer logo was designed by community member [Justin Levine](https://github.com/jal-co).
 
 # License
+
 - **OrcaSlicer** is licensed under the GNU Affero General Public License, version 3.
 - The **GNU Affero General Public License**, version 3 ensures that if you use any part of this software in any way (even behind a web server), your software must be released under the same license.
 - OrcaSlicer includes a **pressure advance calibration pattern test** adapted from Andrew Ellis' generator, which is licensed under GNU General Public License, version 3. Ellis' generator is itself adapted from a generator developed by Sineos for Marlin, which is licensed under GNU General Public License, version 3.

build_flatpak.sh

@@ -199,22 +199,22 @@ echo -e "${GREEN}All required dependencies found${NC}"
 # Install runtime and SDK if requested
 if [[ "$INSTALL_RUNTIME" == true ]]; then
     echo -e "${YELLOW}Installing GNOME runtime and SDK...${NC}"
-    flatpak install --user -y flathub org.gnome.Platform//49
-    flatpak install --user -y flathub org.gnome.Sdk//49
+    flatpak install --user -y flathub org.gnome.Platform//50
+    flatpak install --user -y flathub org.gnome.Sdk//50
 fi
 
 # Check if required runtime is available
-if ! flatpak info --user org.gnome.Platform//49 &> /dev/null; then
-    echo -e "${RED}Error: GNOME Platform 49 runtime is not installed.${NC}"
+if ! flatpak info --user org.gnome.Platform//50 &> /dev/null; then
+    echo -e "${RED}Error: GNOME Platform 50 runtime is not installed.${NC}"
     echo "Run with -i flag to install it automatically, or install manually:"
-    echo "flatpak install --user flathub org.gnome.Platform//49"
+    echo "flatpak install --user flathub org.gnome.Platform//50"
     exit 1
 fi
 
-if ! flatpak info --user org.gnome.Sdk//49 &> /dev/null; then
-    echo -e "${RED}Error: GNOME SDK 49 is not installed.${NC}"
+if ! flatpak info --user org.gnome.Sdk//50 &> /dev/null; then
+    echo -e "${RED}Error: GNOME SDK 50 is not installed.${NC}"
     echo "Run with -i flag to install it automatically, or install manually:"
-    echo "flatpak install --user flathub org.gnome.Sdk//49"
+    echo "flatpak install --user flathub org.gnome.Sdk//50"
     exit 1
 fi
 

build_linux.sh

@@ -504,13 +504,24 @@ if [[ -n "${USE_LLD}" ]] ; then
     fi
 fi
 
-# Auto-detect ccache for faster rebuilds
 export CMAKE_CCACHE_ARGS=()
-if command -v ccache >/dev/null 2>&1 ; then
-    echo "ccache found at $(command -v ccache), enabling compiler caching..."
-    export CMAKE_CCACHE_ARGS=(-DCMAKE_C_COMPILER_LAUNCHER=ccache -DCMAKE_CXX_COMPILER_LAUNCHER=ccache)
+CMAKE_CCACHE=${CMAKE_CCACHE:-}
+if [ -n "$CMAKE_CCACHE" ]; then
+        echo "Checking ${CMAKE_CCACHE} environment variable for compiler cache program..."
+        CMAKE_CCACHE=$(command -v "${CMAKE_CCACHE}") || {
+            echo "CMAKE_CCACHE environment variable is set to '${CMAKE_CCACHE}' but it was not found in PATH."
+            CMAKE_CCACHE=""
+        }
+elif command -v sccache >/dev/null 2>&1 ; then
+        CMAKE_CCACHE=$(command -v sccache)
+elif command -v ccache >/dev/null 2>&1 ; then
+        CMAKE_CCACHE=$(command -v ccache)
+fi
+if [ -n "${CMAKE_CCACHE}" ] ; then
+    echo "${CMAKE_CCACHE} found, enabling compiler caching..."
+    export CMAKE_CCACHE_ARGS=(-DCMAKE_C_COMPILER_LAUNCHER="${CMAKE_CCACHE}" -DCMAKE_CXX_COMPILER_LAUNCHER="${CMAKE_CCACHE}")
 else
-    echo "Note: ccache not found. Install ccache for faster rebuilds."
+    echo "Note: ccache or sccache are not found. Install either of them for faster rebuilds."
 fi
 
 if [[ -n "${BUILD_DEPS}" ]] ; then
@@ -525,7 +536,7 @@ if [[ -n "${BUILD_DEPS}" ]] ; then
         BUILD_ARGS+=(-DCMAKE_BUILD_TYPE="${BUILD_CONFIG}")
     fi
 
-    print_and_run cmake -S deps -B deps/$BUILD_DIR "${CMAKE_C_CXX_COMPILER_CLANG[@]}" "${CMAKE_LLD_LINKER_ARGS[@]}" -G Ninja "${COLORED_OUTPUT}" "${BUILD_ARGS[@]}"
+    print_and_run cmake -S deps -B deps/$BUILD_DIR "${CMAKE_C_CXX_COMPILER_CLANG[@]}" "${CMAKE_LLD_LINKER_ARGS[@]}" "${CMAKE_CCACHE_ARGS[@]}" -G Ninja "${COLORED_OUTPUT}" "${BUILD_ARGS[@]}"
     print_and_run cmake --build deps/$BUILD_DIR -j1
 fi
 

deps/Boost/Boost.cmake

@@ -10,7 +10,13 @@ if (APPLE AND CMAKE_OSX_ARCHITECTURES)
     set(_context_arch_line "-DBOOST_CONTEXT_ARCHITECTURE:STRING=${CMAKE_OSX_ARCHITECTURES}")
 endif ()
 
+set(_options "")
+if (MSVC AND DEP_DEBUG)
+    set(_options "FORWARD_CONFIG")
+endif ()
+
 orcaslicer_add_cmake_project(Boost
+    ${_options}
     URL "https://github.com/boostorg/boost/releases/download/boost-1.84.0/boost-1.84.0.tar.gz"
     URL_HASH SHA256=4d27e9efed0f6f152dc28db6430b9d3dfb40c0345da7342eaa5a987dde57bd95
     LIST_SEPARATOR |

deps/CMakeLists.txt

@@ -155,17 +155,25 @@ if (NOT _is_multi AND NOT CMAKE_BUILD_TYPE)
 endif ()
 
 function(orcaslicer_add_cmake_project projectname)
-    cmake_parse_arguments(P_ARGS "" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND" "CMAKE_ARGS" ${ARGN})
+    cmake_parse_arguments(P_ARGS "FORWARD_CONFIG" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND" "CMAKE_ARGS" ${ARGN})
 
     set(_configs_line -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE})
     if (_is_multi OR MSVC)
-        if (ORCA_INCLUDE_DEBUG_INFO AND NOT DEP_DEBUG)
+        if (P_ARGS_FORWARD_CONFIG)
+            set(_configs_line -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE})
+        elseif (ORCA_INCLUDE_DEBUG_INFO AND NOT DEP_DEBUG)
             set(_configs_line "-DCMAKE_C_FLAGS_RELEASE:STRING=${CMAKE_C_FLAGS_RELWITHDEBINFO} -DCMAKE_CXX_FLAGS_RELEASE:STRING=${CMAKE_CXX_FLAGS_RELWITHDEBINFO}")
         else ()
             set(_configs_line "")
         endif ()
     endif ()
 
+    if (P_ARGS_FORWARD_CONFIG)
+        set(_target_config "$<CONFIG>")
+    else()
+        set(_target_config "Release")
+    endif()
+
     if (MSVC)
       set(_gen CMAKE_GENERATOR "${DEP_MSVC_GEN}" CMAKE_GENERATOR_PLATFORM "${DEP_PLATFORM}")
     else()
@@ -196,6 +204,8 @@ if (NOT IS_CROSS_COMPILE OR NOT APPLE)
             -DCMAKE_DEBUG_POSTFIX:STRING=d
             -DCMAKE_C_COMPILER:STRING=${CMAKE_C_COMPILER}
             -DCMAKE_CXX_COMPILER:STRING=${CMAKE_CXX_COMPILER}
+            -DCMAKE_C_COMPILER_LAUNCHER:STRING=${CMAKE_C_COMPILER_LAUNCHER}
+            -DCMAKE_CXX_COMPILER_LAUNCHER:STRING=${CMAKE_CXX_COMPILER_LAUNCHER}
             -DCMAKE_TOOLCHAIN_FILE:STRING=${CMAKE_TOOLCHAIN_FILE}
             -DCMAKE_EXE_LINKER_FLAGS:STRING=${CMAKE_EXE_LINKER_FLAGS}
             -DCMAKE_SHARED_LINKER_FLAGS:STRING=${CMAKE_SHARED_LINKER_FLAGS}
@@ -206,8 +216,8 @@ if (NOT IS_CROSS_COMPILE OR NOT APPLE)
             ${DEP_CMAKE_OPTS}
             ${P_ARGS_CMAKE_ARGS}
        ${P_ARGS_UNPARSED_ARGUMENTS}
-       BUILD_COMMAND ${CMAKE_COMMAND} --build . --config Release -- ${_build_j}
-       INSTALL_COMMAND ${CMAKE_COMMAND} --build . --target install --config Release
+       BUILD_COMMAND ${CMAKE_COMMAND} --build . --config ${_target_config} -- ${_build_j}
+       INSTALL_COMMAND ${CMAKE_COMMAND} --build . --target install --config ${_target_config}
     )
 
     if (FLATPAK)
@@ -241,14 +251,16 @@ else()
             -DCMAKE_INSTALL_PREFIX:STRING=${DESTDIR}
             -DCMAKE_PREFIX_PATH:STRING=${DESTDIR}
             -DCMAKE_IGNORE_PREFIX_PATH:STRING=${CMAKE_IGNORE_PREFIX_PATH}
+            -DCMAKE_C_COMPILER_LAUNCHER:STRING=${CMAKE_C_COMPILER_LAUNCHER}
+            -DCMAKE_CXX_COMPILER_LAUNCHER:STRING=${CMAKE_CXX_COMPILER_LAUNCHER}
             -DBUILD_SHARED_LIBS:BOOL=OFF
             ${_cmake_osx_arch}
             "${_configs_line}"
             ${DEP_CMAKE_OPTS}
             ${P_ARGS_CMAKE_ARGS}
        ${P_ARGS_UNPARSED_ARGUMENTS}
-       BUILD_COMMAND ${CMAKE_COMMAND} --build . --config Release -- ${_build_j}
-       INSTALL_COMMAND ${CMAKE_COMMAND} --build . --target install --config Release
+       BUILD_COMMAND ${CMAKE_COMMAND} --build . --config ${_target_config} -- ${_build_j}
+       INSTALL_COMMAND ${CMAKE_COMMAND} --build . --target install --config ${_target_config}
     )
 
 endif()

deps/Draco/Draco.cmake

@@ -1,4 +1,10 @@
+set(_options "")
+if (MSVC AND DEP_DEBUG)
+    set(_options "FORWARD_CONFIG")
+endif ()
+
 orcaslicer_add_cmake_project(Draco
+    ${_options}
     URL https://github.com/google/draco/archive/refs/tags/1.5.7.zip
     URL_HASH SHA256=27b72ba2d5ff3d0a9814ad40d4cb88f8dc89a35491c0866d952473f8f9416b77
 )

deps/Eigen/Eigen.cmake

@@ -1,5 +1,11 @@
+set(_eigen_extra_flags "")
+if (MSVC)
+    set(_eigen_extra_flags "-DCMAKE_CXX_FLAGS:STRING=/bigobj")
+endif ()
+
 orcaslicer_add_cmake_project(Eigen
     URL https://gitlab.com/libeigen/eigen/-/archive/5.0.1/eigen-5.0.1.zip
     URL_HASH SHA256=0dbb1f9e3aaad66f352c03227d8c983f6f0b49e0b07e71a7300f4abcc01aee12
+    CMAKE_ARGS "${_eigen_extra_flags}"
     DEPENDS dep_Boost dep_GMP dep_MPFR
 )

deps/OpenCV/OpenCV.cmake

@@ -1,7 +1,11 @@
 if (MSVC)
     set(_use_IPP "-DWITH_IPP=ON")
+    if (DEP_DEBUG)
+        set(_options "FORWARD_CONFIG")
+    endif ()
 else ()
     set(_use_IPP "-DWITH_IPP=OFF")
+    set(_options "")
 endif ()
 
 if (IN_GIT_REPO)
@@ -9,6 +13,7 @@ if (IN_GIT_REPO)
 endif ()
 
 orcaslicer_add_cmake_project(OpenCV
+    ${_options}
     URL https://github.com/opencv/opencv/archive/refs/tags/4.6.0.tar.gz
     URL_HASH SHA256=1ec1cba65f9f20fe5a41fda1586e01c70ea0c9a6d7b67c9e13edf0cfe2239277
     PATCH_COMMAND git apply ${OpenCV_DIRECTORY_FLAG} --verbose --ignore-space-change --whitespace=fix ${CMAKE_CURRENT_LIST_DIR}/0001-vs.patch  ${CMAKE_CURRENT_LIST_DIR}/0002-clang19-macos.patch

deps_src/CMakeLists.txt

@@ -27,6 +27,7 @@ add_subdirectory(libigl)
 add_subdirectory(libnest2d)
 add_subdirectory(mcut)
 add_subdirectory(md4c)
+add_subdirectory(mdns)
 add_subdirectory(miniz)
 add_subdirectory(minilzo)
 add_subdirectory(qhull)

deps_src/libnest2d/include/libnest2d/placers/nfpplacer.hpp

@@ -1123,18 +1123,17 @@ private:
 
         std::vector<RawShape> objs,excludes;
         for (const Item &item : items_) {
-            if (item.isFixed()) continue;
-            objs.push_back(item.transformedShape());
+            if (item.isFixed())
+                excludes.push_back(item.transformedShape());
+            else
+                objs.push_back(item.transformedShape());
         }
         if (objs.empty())
             return;
+        // Without fixed items this inner-fit NFP can exceed clipper's range and crash MSVC.
+        if (!excludes.empty())
         { // find a best position inside NFP of fixed items (excluded regions), so the center of pile is cloest to bed center
             RawShape objs_convex_hull = sl::convexHull(objs);
-            for (const Item &item : items_) {
-                if (item.isFixed()) {
-        		    excludes.push_back(item.transformedShape());
-                }
-            }
 
             auto   nfps = calcnfp(objs_convex_hull, excludes, bbin, Lvl<MaxNfpLevel::value>());
             if (nfps.empty()) {

deps_src/mdns/CMakeLists.txt

@@ -0,0 +1,19 @@
+cmake_minimum_required(VERSION 3.13)
+
+project(mdns)
+
+# Static library wrapping mjansson/mdns (public domain) plus the cxmdns C++
+# wrapper from CrealityPrint v7.1.1 (AGPL-3.0). See NOTICE.md for attribution.
+add_library(mdns STATIC
+    mdns.h
+    mdns.c
+    cxmdns.h
+    cxmdns.cpp
+)
+
+target_include_directories(mdns SYSTEM PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
+
+if (MSVC)
+    # mjansson/mdns uses GetAdaptersAddresses (Iphlpapi) and Winsock2 (Ws2_32).
+    target_link_libraries(mdns PUBLIC Iphlpapi Ws2_32)
+endif()

deps_src/mdns/NOTICE.md

@@ -0,0 +1,39 @@
+# mDNS / DNS-SD library
+
+The four files in this directory implement mDNS / DNS-SD lookup and are
+vendored from third-party sources:
+
+## mdns.h, mdns.c
+
+mDNS / DNS-SD lookup library by Mattias Jansson. Originally released to
+the public domain at https://github.com/mjansson/mdns.
+
+The exact files here were taken from CrealityOfficial/CrealityPrint
+v7.1.1, which split the upstream header-only library into separate
+declaration (mdns.h) and implementation (mdns.c) files.
+
+- Source: https://github.com/mjansson/mdns
+- License: Public domain (no restrictions on use)
+
+## cxmdns.h, cxmdns.cpp
+
+Thin C++ wrapper over mdns.{h,c} that exposes a single function:
+
+  std::vector<machine_info> syncDiscoveryService(
+      const std::vector<std::string>& prefix);
+
+It sends a DNS-SD meta-discovery query (`_services._dns-sd._udp.local.`),
+listens for ~5 seconds, and returns `{ip, service_name}` for every
+service announcement whose name contains any of the given prefixes.
+
+OrcaSlicer uses this to find Creality K-series printers on the LAN
+(service-name prefix "Creality"), since K-series firmware announces
+each printer under a per-device-unique service type
+`_Creality-<MAC-derived-hex>._udp.local.` that no fixed-name query can
+target.
+
+- Source: CrealityOfficial/CrealityPrint v7.1.1
+  `src/slic3r/GUI/print_manage/utils/cxmdns.{h,cpp}`
+- License: GNU AGPL-3.0 (compatible with OrcaSlicer's AGPL-3.0; see
+  top-level LICENSE.txt)
+- Imported: 2026-05-19

deps_src/mdns/cxmdns.cpp

@@ -0,0 +1,256 @@
+#include"cxmdns.h"
+#include"mdns.h"
+#ifdef _WIN32
+#define _CRT_SECURE_NO_WARNINGS 1
+#endif
+
+#include <stdio.h>
+#include<string.h>
+#include <errno.h>
+#include <signal.h>
+
+#ifdef _WIN32
+#include <winsock2.h>
+#include <iphlpapi.h>
+#define sleep(x) Sleep(x * 1000)
+#else
+#include <netdb.h>
+#include <ifaddrs.h>
+#include <net/if.h>
+#endif
+
+// Alias some things to simulate recieving data to fuzz library
+#if defined(MDNS_FUZZING)
+#define recvfrom(sock, buffer, capacity, flags, src_addr, addrlen) ((mdns_ssize_t)capacity)
+#define printf
+#endif
+
+#include "mdns.h"
+
+#if defined(MDNS_FUZZING)
+#undef recvfrom
+#endif
+
+namespace cxnet
+{
+	template <typename F>
+	mdns_record_callback_fn lambda2function(F lambda)
+	{
+		static auto lambdabak = lambda;
+		return [](int sock, const struct sockaddr* from, size_t addrlen,
+			mdns_entry_type_t entry, uint16_t query_id, uint16_t rtype,
+			uint16_t rclass, uint32_t ttl, const void* data, size_t size,
+			size_t name_offset, size_t name_length, size_t record_offset,
+			size_t record_length, void* user_data)->int {lambdabak(sock, from, addrlen, entry, query_id, rtype, rclass, ttl, data, size, name_offset, name_length, record_offset, record_length, user_data); return 0; };
+	}
+
+	volatile sig_atomic_t running = 1;
+#ifdef _WIN32
+	BOOL console_handler(DWORD signal) {
+		if (signal == CTRL_C_EVENT) {
+			running = 0;
+		}
+		return TRUE;
+	}
+#else
+	void signal_handler(int signal) {
+		running = 0;
+	}
+#endif
+
+	void recvMachineInfoFromSocket(int sock, void* buffer, size_t capacity, const std::vector<std::string>& prefix, std::vector<machine_info>& retmachineInfos, int recIndex)
+	{
+		struct sockaddr_in6 addr;
+		struct sockaddr* saddr = (struct sockaddr*)&addr;
+		socklen_t addrlen = sizeof(addr);
+		memset(&addr, 0, sizeof(addr));
+#ifdef __APPLE__
+		saddr->sa_len = sizeof(addr);
+#endif
+		mdns_ssize_t ret = recvfrom(sock, (char*)buffer, (mdns_size_t)capacity, 0, saddr, &addrlen);
+		if (ret <= 0)
+			return;
+
+		size_t data_size = (size_t)ret;
+		//size_t records = 0;
+		const uint16_t* data = (uint16_t*)buffer;
+
+		uint16_t query_id = mdns_ntohs(data++);
+		uint16_t flags = mdns_ntohs(data++);
+		uint16_t questions = mdns_ntohs(data++);
+		uint16_t answer_rrs = mdns_ntohs(data++);
+		uint16_t authority_rrs = mdns_ntohs(data++);
+		uint16_t additional_rrs = mdns_ntohs(data++);
+
+		// According to RFC 6762 the query ID MUST match the sent query ID (which is 0 in our case)
+		if (query_id || (flags != 0x8400))
+			return;  // Not a reply to our question
+
+		// It seems some implementations do not fill the correct questions field,
+		// so ignore this check for now and only validate answer string
+		// if (questions != 1)
+		// 	return 0;
+
+		int i;
+		for (i = 0; i < questions; ++i) {
+			size_t offset = MDNS_POINTER_DIFF(data, buffer);
+			size_t verify_offset = 12;
+			// Verify it's our question, _services._dns-sd._udp.local.
+			if (!mdns_string_equal(buffer, data_size, &offset, mdns_services_query,
+				sizeof(mdns_services_query), &verify_offset))
+				return;
+			data = (const uint16_t*)MDNS_POINTER_OFFSET(buffer, offset);
+
+			uint16_t rtype = mdns_ntohs(data++);
+			uint16_t rclass = mdns_ntohs(data++);
+
+			// Make sure we get a reply based on our PTR question for class IN
+			if ((rtype != MDNS_RECORDTYPE_PTR) || ((rclass & 0x7FFF) != MDNS_CLASS_IN))
+				return;
+		}
+
+		for (i = 0; i < answer_rrs; ++i) {
+			size_t offset = MDNS_POINTER_DIFF(data, buffer);
+			size_t verify_offset = 12;
+			// Verify it's an answer to our question, _services._dns-sd._udp.local.
+			size_t name_offset = offset;
+			int is_answer = mdns_string_equal(buffer, data_size, &offset, mdns_services_query,
+				sizeof(mdns_services_query), &verify_offset);
+			if (!is_answer && !mdns_string_skip(buffer, data_size, &offset))
+				break;
+			size_t name_length = offset - name_offset;
+			if ((offset + 10) > data_size)
+				return;
+			data = (const uint16_t*)MDNS_POINTER_OFFSET(buffer, offset);
+
+			uint16_t rtype = mdns_ntohs(data++);
+			uint16_t rclass = mdns_ntohs(data++);
+			uint32_t ttl = mdns_ntohl(data);
+			data += 2;
+			uint16_t length = mdns_ntohs(data++);
+			if (length > (data_size - offset))
+				return;
+
+			static char addrbuf[64];
+			static char entrybuf[256];
+			static char namebuf[256];
+
+			if (is_answer) {
+				offset = MDNS_POINTER_DIFF(data, buffer);
+				(void)sizeof(sock);
+				(void)sizeof(query_id);
+				(void)sizeof(name_length);
+				//(void)sizeof(0);
+				mdns_string_t fromaddrstr = ip_address_to_string(addrbuf, sizeof(addrbuf), saddr, addrlen);
+				mdns_string_t entrystr =
+					mdns_string_extract(buffer, data_size, &name_offset, entrybuf, sizeof(entrybuf));
+				if (rtype == MDNS_RECORDTYPE_PTR) {
+					mdns_string_t namestr = mdns_record_parse_ptr(buffer, data_size, offset, length,
+						namebuf, sizeof(namebuf));
+					if (!namestr.str || namestr.length == 0) {
+						return;
+					}
+					const std::string answer_name(namestr.str, namestr.length);
+					bool bFound = false;
+					for (const auto& item : prefix)
+					{
+						if (answer_name.find(item) != std::string::npos)
+							bFound = true;
+					}
+					if (!bFound)
+					{
+						return;
+					}
+
+					char ip[16] = { 0 };
+					sscanf(fromaddrstr.str, "%[^:]", ip);
+					retmachineInfos.push_back({ ip, answer_name });
+				}
+			}
+		}
+	}
+
+	std::vector<machine_info> syncDiscoveryService(const std::vector<std::string>& prefix)
+	{
+		std::vector<machine_info> retmachineInfos;
+		const char* hostname = "cxslice-host";
+		// Initialize network environment
+#ifdef _WIN32
+		WORD versionWanted = MAKEWORD(1, 1);
+		WSADATA wsaData;
+		if (WSAStartup(versionWanted, &wsaData)) {
+			printf("Failed to initialize WinSock\n");
+			return retmachineInfos;
+		}
+		char hostname_buffer[256];
+		DWORD hostname_size = (DWORD)sizeof(hostname_buffer);
+		if (GetComputerNameA(hostname_buffer, &hostname_size))
+			hostname = hostname_buffer;
+		SetConsoleCtrlHandler(console_handler, TRUE);
+#else
+		char hostname_buffer[256];
+		size_t hostname_size = sizeof(hostname_buffer);
+		if (gethostname(hostname_buffer, hostname_size) == 0)
+			hostname = hostname_buffer;
+		signal(SIGINT, signal_handler);
+#endif
+		int sockets[32];
+		int num_sockets = open_client_sockets(sockets, sizeof(sockets) / sizeof(sockets[0]), 0);
+		if (num_sockets <= 0) {
+			printf("Failed to open any client sockets\n");
+#ifdef _WIN32
+			WSACleanup();
+#endif
+			return retmachineInfos;
+		}
+		printf("Opened %d socket%s for DNS-SD\n", num_sockets, num_sockets > 1 ? "s" : "");
+		printf("Sending DNS-SD discovery\n");
+		for (int isock = 0; isock < num_sockets; ++isock) {
+			if (mdns_discovery_send(sockets[isock]))
+				printf("Failed to send DNS-DS discovery: %s\n", strerror(errno));
+		}
+		size_t capacity = 2048;
+		void* buffer = malloc(capacity);
+		size_t recordNum = 0;
+		void* user_data = 0;
+
+		// This is a simple implementation that loops for 5 seconds or as long as we get replies
+		int res;
+		printf("Reading DNS-SD replies\n");
+		do {
+			struct timeval timeout;
+			timeout.tv_sec = 5;
+			timeout.tv_usec = 0;
+
+			int nfds = 0;
+			fd_set readfs;
+			FD_ZERO(&readfs);
+			for (int isock = 0; isock < num_sockets; ++isock) {
+				if (sockets[isock] >= nfds)
+					nfds = sockets[isock] + 1;
+				FD_SET(sockets[isock], &readfs);
+			}
+			res = select(nfds, &readfs, 0, 0, &timeout);
+			if (res > 0) {
+				for (int isock = 0; isock < num_sockets; ++isock) {
+					if (FD_ISSET(sockets[isock], &readfs)) {
+						//	records += mdns_discovery_recv(sockets[isock], buffer, capacity, query_callback,
+						//		0);
+						recvMachineInfoFromSocket(sockets[isock], buffer, capacity, prefix, retmachineInfos, isock);
+						recordNum++;
+					}
+				}
+			}
+		} while (res > 0);
+
+		free(buffer);
+		//
+		for (int isock = 0; isock < num_sockets; ++isock)
+			mdns_socket_close(sockets[isock]);
+		printf("Closed socket%s\n", num_sockets ? "s" : "");
+#ifdef _WIN32
+		WSACleanup();
+#endif
+		return std::move(retmachineInfos);
+	}
+}

deps_src/mdns/cxmdns.h

@@ -0,0 +1,16 @@
+#ifndef _CX_MDNS_H
+#define _CX_MDNS_H
+#include<string>
+#include<vector>
+
+namespace cxnet
+{
+	struct machine_info
+	{
+		std::string machineIp;
+		std::string answer;
+	};
+
+	std::vector<machine_info> syncDiscoveryService(const std::vector<std::string>& prefix);
+}
+#endif

localization/i18n/list.txt

@@ -48,9 +48,12 @@ src/slic3r/GUI/DeviceTab/uiAmsHumidityPopup.cpp
 src/slic3r/GUI/DeviceTab/uiDeviceUpdateVersion.h
 src/slic3r/GUI/DeviceTab/uiDeviceUpdateVersion.cpp
 src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp
+src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp
 src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp
 src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp
+src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp
 src/slic3r/GUI/Gizmos/GLGizmoFuzzySkin.cpp
+src/slic3r/GUI/Gizmos/GLGizmoFuzzySkin.hpp
 src/slic3r/GUI/Gizmos/GLGizmoMove.cpp
 src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp
 src/slic3r/GUI/Gizmos/GLGizmoScale.cpp
@@ -58,6 +61,7 @@ src/slic3r/GUI/Gizmos/GLGizmosManager.cpp
 src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp
 src/slic3r/GUI/Gizmos/GizmoObjectManipulation.cpp
 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp
+src/slic3r/GUI/Gizmos/GLGizmoCut.hpp
 src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp
 src/slic3r/GUI/Gizmos/GLGizmoFaceDetector.cpp
 src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp
@@ -67,7 +71,9 @@ src/slic3r/GUI/Gizmos/GLGizmoText.hpp
 src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp
 src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp
 src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp
+src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp
 src/slic3r/GUI/Gizmos/GLGizmoAssembly.cpp
+src/slic3r/GUI/Gizmos/GLGizmoAssembly.hpp
 src/slic3r/GUI/GUI.cpp
 src/slic3r/GUI/GUI_App.cpp
 src/slic3r/GUI/GUI_AuxiliaryList.cpp
@@ -89,6 +95,8 @@ src/slic3r/GUI/Widgets/AMSControl.cpp
 src/slic3r/GUI/Widgets/FanControl.cpp
 src/slic3r/GUI/Widgets/FilamentLoad.cpp
 src/slic3r/GUI/Widgets/TempInput.cpp
+src/slic3r/GUI/Widgets/CheckList.cpp
+src/slic3r/GUI/Widgets/SwitchButton.cpp
 src/slic3r/GUI/ImGuiWrapper.cpp
 src/slic3r/GUI/Jobs/ArrangeJob.cpp
 src/slic3r/GUI/Jobs/OrientJob.cpp
@@ -98,6 +106,7 @@ src/slic3r/GUI/Jobs/BindJob.cpp
 src/slic3r/GUI/Jobs/PrintJob.cpp
 src/slic3r/GUI/Jobs/SendJob.cpp
 src/slic3r/GUI/Jobs/EmbossJob.cpp
+src/slic3r/GUI/Jobs/PlaterWorker.hpp
 src/slic3r/GUI/ThermalPreconditioningDialog.cpp
 src/slic3r/GUI/ThermalPreconditioningDialog.hpp
 src/slic3r/GUI/Jobs/SLAImportJob.cpp
@@ -218,6 +227,7 @@ src/slic3r/GUI/CreatePresetsDialog.cpp
 src/slic3r/GUI/DailyTips.cpp
 src/slic3r/Utils/CalibUtils.cpp
 src/slic3r/GUI/PhysicalPrinterDialog.cpp
+src/slic3r/Utils/3DPrinterOS.cpp
 src/slic3r/Utils/AstroBox.cpp
 src/slic3r/Utils/Duet.cpp
 src/slic3r/Utils/FlashAir.cpp
@@ -236,8 +246,12 @@ src/slic3r/GUI/FilamentMapPanel.cpp
 src/slic3r/Utils/Obico.cpp
 src/slic3r/Utils/SimplyPrint.cpp
 src/slic3r/Utils/Flashforge.cpp
+src/slic3r/Utils/ElegooLink.cpp
+src/slic3r/Utils/CrealityPrint.cpp
+src/slic3r/Utils/PrintHost.cpp
 src/slic3r/GUI/Jobs/OAuthJob.cpp
 src/slic3r/GUI/Gizmos/GLGizmoBrimEars.cpp
+src/slic3r/GUI/Gizmos/GLGizmoBrimEars.hpp
 src/slic3r/GUI/PartSkipDialog.cpp
 src/slic3r/GUI/PartSkipDialog.hpp
 src/slic3r/GUI/SkipPartCanvas.cpp
@@ -249,4 +263,12 @@ src/slic3r/GUI/NetworkPluginDialog.cpp
 src/slic3r/GUI/RammingChart.cpp
 src/slic3r/GUI/StepMeshDialog.cpp
 src/slic3r/GUI/FilamentPickerDialog.hpp
+src/slic3r/GUI/PresetBundleDialog.cpp
+src/slic3r/GUI/ExportPresetBundleDialog.cpp
+src/slic3r/GUI/DesktopIntegrationDialog.cpp
+src/slic3r/GUI/Downloader.cpp
+src/slic3r/GUI/DownloaderFileGet.cpp
+src/slic3r/GUI/FileArchiveDialog.cpp
+src/slic3r/GUI/PrinterCloudAuthDialog.cpp
+src/slic3r/GUI/PrinterWebViewHandler.cpp
 src/libslic3r/PresetBundle.cpp

resources/calib/temperature_tower/gen_belt_temp_tower.py

@@ -0,0 +1,79 @@
+#!/usr/bin/env python3
+"""Belt temperature-tower asset generator (discrete-provini design).
+
+A vertical temperature tower cannot be sliced on a belt printer, so lay a row of
+DISCRETE provini (one per temperature) along the belt (designed Y) with a fixed
+surface gap. Each provino is the chevron+arc unit (belt_temp_provino_unit.stl,
+keel-first); its temperature is ENGRAVED upright into the 50 mm face — a raised
+number would be an unsupported overhang on the belt. The C++ calib_temp belt branch
+(Plater.cpp) injects one M104 per zone 70 layers INTO provino i:
+  print_z[i] = i * PITCH * cos(theta) + 70 * layer_height   (theta = 45)
+inside the body, not in the empty inter-provino gap (which has no sliced layers for
+the event to attach to). PITCH below is the shared geometry contract with that code —
+keep them in sync.
+
+Generates one STL per filament temp range used by Temp_Calibration_Dlg.
+"""
+import numpy as np, trimesh, os
+from matplotlib.textpath import TextPath
+from matplotlib.font_manager import FontProperties
+from shapely.geometry import Polygon as ShPoly
+from shapely.ops import unary_union
+
+HERE = os.path.dirname(os.path.abspath(__file__))
+UNIT = os.path.join(HERE, 'belt_temp_provino_unit.stl')   # single provino, keel-first
+SURF_GAP = 25.0            # surface-to-surface gap between provini (mm) — user spec
+TEXT_H = 9.0
+TEXT_DEPTH = 0.8           # engraving depth (numbers are CUT into the face, not raised:
+                          # a raised number is an unsupported Y-overhang on the belt)
+TEXT_OVERSHOOT = 0.6       # extra height poking out of the face for a clean boolean cut
+
+# Temperature ranges (start, end) per filament family, 5 C step. File name encodes them.
+RANGES = [(230,190),(270,230),(250,230),(280,240),(240,210),(320,280)]
+
+unit = trimesh.load(UNIT)
+dY = unit.bounds[1,1] - unit.bounds[0,1]
+PITCH = dY + SURF_GAP                       # designed-Y pitch == C++ contract constant
+print(f"unit dY={dY:.2f}  PITCH={PITCH:.3f}  (C++ contract: print_z[i]=i*{PITCH:.3f}*cos45)")
+
+# 50 mm face normal (0,-1,1)/sqrt2 ; UPRIGHT basis u=+X det(+1) (verified non-mirrored)
+n = np.array([0,-1,1.])/np.sqrt(2)
+u = np.array([1,0,0.]); v = np.array([0,1,1.])/np.sqrt(2)
+R = np.column_stack([u,v,n])
+fn = unit.face_normals; fc = unit.triangles_center; fa = unit.area_faces
+sel = (fn@n) > 0.9
+face_c = (fc[sel]*fa[sel,None]).sum(0)/fa[sel].sum()
+
+def text_mesh(s):
+    tp = TextPath((0,0), s, size=TEXT_H, prop=FontProperties(family='DejaVu Sans'))
+    rings = [ShPoly(p) for p in tp.to_polygons() if len(p)>=3]
+    rings.sort(key=lambda r:r.area, reverse=True)
+    used=[False]*len(rings); parts=[]
+    for i,o in enumerate(rings):
+        if used[i]: continue
+        holes=[]
+        for j in range(i+1,len(rings)):
+            if not used[j] and o.contains(rings[j]): holes.append(rings[j].exterior.coords); used[j]=True
+        parts.append(ShPoly(o.exterior.coords,holes)); used[i]=True
+    poly = unary_union(parts)
+    geoms = list(poly.geoms) if poly.geom_type=='MultiPolygon' else [poly]
+    m = trimesh.util.concatenate([trimesh.creation.extrude_polygon(g,height=TEXT_DEPTH+TEXT_OVERSHOOT) for g in geoms])
+    c = m.bounds.mean(axis=0); m.apply_translation([-c[0],-c[1],0]); return m
+
+for t_start, t_end in RANGES:
+    temps = list(range(t_start, t_end-1, -5))
+    parts=[]
+    for i,T in enumerate(temps):
+        c = unit.copy(); c.apply_translation([0, i*PITCH, 0])
+        t = text_mesh(str(T)); M=np.eye(4); M[:3,:3]=R; t.apply_transform(M)
+        # place the text spanning from TEXT_DEPTH inside the face to TEXT_OVERSHOOT outside,
+        # then CUT it out of the provino (engrave) — no raised material, no Y-overhang.
+        t.apply_translation(face_c - n*TEXT_DEPTH + np.array([0,i*PITCH,0]))
+        c = trimesh.boolean.difference([c, t], engine='manifold')
+        parts.append(c)
+    asset = trimesh.util.concatenate(parts)
+    out = os.path.join(HERE, f"belt_temp_tower_{t_start}_{t_end}.stl")
+    asset.export(out)
+    dims = np.round(asset.bounds[1]-asset.bounds[0],1)
+    wt = all(p.is_watertight for p in parts)
+    print(f"  {t_start}->{t_end}: {len(temps)} zones  bbox={dims}  watertight={wt}  -> {os.path.basename(out)}")

resources/data/hints.ini

@@ -146,16 +146,16 @@ text = Fine-tuning for flow rate\nDid you know that flow rate can be fine-tuned
 text = Split your prints into plates\nDid you know that you can split a model that has a lot of parts into individual plates ready to print? This will simplify the process of keeping track of all the parts.
 
 [hint:Speed up your print with Adaptive Layer Height]
-text = Speed up your print with Adaptive Layer Height\nDid you know that you can print a model even faster, by using the Adaptive Layer Height option? Check it out!
+text = Speed up your print with Adaptive Layer Height\nDid you know that you can print a model even faster by using the Adaptive Layer Height option? Check it out!
 
 [hint:Support painting]
 text = Support painting\nDid you know that you can paint the location of your supports? This feature makes it easy to place the support material only on the sections of the model that actually need it.
 
 [hint:Different types of supports]
-text = Different types of supports\nDid you know that you can choose from multiple types of supports? Tree supports work great for organic models, while saving filament and improving print speed. Check them out!
+text = Different types of supports\nDid you know that you can choose from multiple types of supports? Tree supports work great for organic models while saving filament and improving print speed. Check them out!
 
 [hint:Printing Silk Filament]
-text = Printing Silk Filament\nDid you know that Silk filament needs special consideration to print it successfully? Higher temperature and lower speed are always recommended for the best results.
+text = Printing Silk Filament\nDid you know that Silk filament needs special consideration to print successfully? A higher temperature and lower speed are always recommended for the best results.
 
 [hint:Brim for better adhesion]
 text = Brim for better adhesion\nDid you know that when printed models have a small contact interface with the printing surface, it's recommended to use a brim?
@@ -167,13 +167,13 @@ text = Set parameters for multiple objects\nDid you know that you can set slicin
 text = Stack objects\nDid you know that you can stack objects as a whole one?
 
 [hint:Flush into support/objects/infill]
-text = Flush into support/objects/infill\nDid you know that you can reduce wasted filament by flushing it into support/objects/infill during filament change?
+text = Flush into support/objects/infill\nDid you know that you can reduce wasted filament by flushing it into support/objects/infill during filament changes?
 
 [hint:Improve strength]
 text = Improve strength\nDid you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?
 
 [hint:When do you need to print with the printer door opened]
-text = When do you need to print with the printer door opened?\nDid you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature? More info about this in the Wiki.
+text = When do you need to print with the printer door opened?\nDid you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature? There is more info about this in the Wiki.
 
 [hint:Avoid warping]
 text = Avoid warping\nDid you know that when printing materials that are prone to warping such as ABS, appropriately increasing the heatbed temperature can reduce the probability of warping?

resources/images/OrcaSlicer_horizontal_dark.svg

@@ -0,0 +1 @@
+<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" width="214" height="80" viewBox="0 0 214 80"><g id="b"><g id="c"><rect width="80" height="80" rx="9.57" ry="9.57" style="fill:#949494;"/></g></g><g id="d"><path id="e" d="M17.3,62.94c4.46,4.45,10.59,7.21,17.36,7.24,13.7.06,24.93-11.22,24.87-25-.03-6.81-2.77-12.97-7.2-17.45L17.31,62.94h0Z" style="fill:#292826;"/></g><g id="f"><path id="g" d="M52.32,27.73L17.3,62.94s.05.05.08.07c12.27-6.26,29.08-17.26,40.6-26.43-1.24-3.36-3.19-6.38-5.65-8.87" style="fill:#009789;"/></g><g id="h"><path id="i" d="M45.48,9.82c-13.67,0-24.77,11.15-24.77,24.91,0,6.85,2.75,13.05,7.2,17.56L62.94,17.07c-4.48-4.47-10.65-7.24-17.46-7.24" style="fill:#292826;"/></g><g id="j"><path id="k" d="M45.48,9.82c-4.74,0-9.17,1.34-12.93,3.65-2.02-.53-4.52-.95-7.39-.93-5,.03-9.08,1.39-11.85,2.65-.69.32-.58,1.33.16,1.49,1.82.39,4.22,1.19,6.59,2.95,1.5,1.1,2.64,2.33,3.5,3.48-1.82,3.47-2.85,7.42-2.85,11.61,0,2.5.37,4.92,1.05,7.2,1.04-2.32,2.14-3.87,2.5-4.36,2.27-3.13,4.68-4.76,8.23-7.15,2.62-1.77,6.26-3.84,16.7-8.14,0,0,3.27-.92,7.65-3.53,1.75-1.04,3.08-2.02,3.5-3.56.03-.11.06-.22.08-.32-4.15-3.17-9.33-5.04-14.95-5.04" style="fill:#262523;"/></g><g id="l"><path id="m" d="M49.61,18.19c.9,1.61-.91,4.37-4.06,6.17s-6.44,1.96-7.35.36c-.9-1.61.91-4.37,4.06-6.17,3.15-1.8,6.44-1.96,7.35-.36" style="fill:#949494;"/></g><path d="M142.44,48.1c-1.01,0-1.84.82-1.84,1.84v18.4c0,1.01.82,1.84,1.84,1.84s1.84-.82,1.84-1.84v-18.4c0-1.01-.82-1.84-1.84-1.84ZM190.71,48.1h-4.4c-6.09,0-11.04,4.96-11.04,11.04s4.96,11.04,11.04,11.04h4.4c1.01,0,1.84-.82,1.84-1.84s-.82-1.84-1.84-1.84h-4.4c-4.06,0-7.36-3.3-7.36-7.36s3.3-7.36,7.36-7.36h4.4c1.01,0,1.84-.82,1.84-1.84s-.82-1.84-1.84-1.84v-.02.02ZM190.71,57.31h-5.35c-1.01,0-1.84.82-1.84,1.84s.82,1.84,1.84,1.84h5.35c1.01,0,1.84-.82,1.84-1.84s-.82-1.84-1.84-1.84ZM105.69,70.18h-8.91c-1.01,0-1.83-.82-1.83-1.83s.81-1.83,1.83-1.83h8.91c1.53,0,2.78-1.24,2.78-2.78s-1.24-2.77-2.78-2.77h-4.31c-3.55,0-6.43-2.89-6.43-6.43s2.89-6.43,6.43-6.43h7.29c1.01,0,1.83.82,1.83,1.83s-.81,1.83-1.83,1.83h-7.29c-1.53,0-2.78,1.24-2.78,2.78s1.24,2.77,2.78,2.77h4.31c3.55,0,6.43,2.89,6.43,6.43s-2.89,6.43-6.43,6.43h0ZM165.89,65.28c-1.49.98-3.35,1.44-5.32,1.11-2.99-.51-5.4-2.88-5.96-5.85-.86-4.67,2.71-8.76,7.23-8.76,1.49,0,2.88.45,4.04,1.21.73.49,1.71.41,2.32-.22h0c.81-.81.71-2.17-.25-2.81-2.12-1.42-4.76-2.13-7.56-1.77-4.98.64-8.97,4.69-9.52,9.66-.75,6.65,4.46,12.32,10.96,12.32,2.23,0,4.31-.67,6.05-1.81.98-.65,1.15-2.03.32-2.86h0c-.63-.63-1.59-.71-2.32-.23h.01ZM132.24,66.5h-5.31c-2.53,0-4.6-2.07-4.6-4.6v-11.96c0-1.01-.82-1.84-1.84-1.84s-1.84.82-1.84,1.84v11.96c0,4.57,3.71,8.28,8.28,8.28h5.31c1.01,0,1.84-.82,1.84-1.84s-.82-1.84-1.84-1.84h0ZM211.96,51.79h-1.84c-4.03,0-7.32,3.27-7.36,7.3v9.27c0,1.01-.82,1.84-1.84,1.84s-1.84-.82-1.84-1.84v-9.27c.04-6.06,4.98-10.97,11.03-10.97h1.84c1.01,0,1.84.82,1.84,1.84s-.82,1.84-1.84,1.84h0Z" style="fill:#949494;"/><path d="M109.73,14.37c5.64,0,10.24,4.59,10.24,10.24s-4.59,10.24-10.24,10.24-10.24-4.59-10.24-10.24,4.59-10.24,10.24-10.24M109.73,9.82c-8.16,0-14.79,6.62-14.79,14.79s6.62,14.79,14.79,14.79,14.79-6.62,14.79-14.79-6.62-14.79-14.79-14.79h0ZM211.52,9.82c-1.26,0-2.27,1.02-2.27,2.27v1.86c-2.66-2.55-6.26-4.13-10.24-4.13-8.16,0-14.79,6.62-14.79,14.79s6.62,14.79,14.79,14.79c3.97,0,7.58-1.58,10.24-4.13v1.86c0,1.26,1.02,2.27,2.27,2.27s2.27-1.02,2.27-2.27V12.1c0-1.26-1.02-2.27-2.27-2.27h0ZM199.01,34.85c-5.64,0-10.24-4.59-10.24-10.24s4.59-10.24,10.24-10.24,10.24,4.59,10.24,10.24-4.59,10.24-10.24,10.24ZM148.11,9.82h-2.27c-8.16,0-14.79,6.62-14.79,14.79v12.51c0,1.26,1.02,2.27,2.27,2.27s2.27-1.02,2.27-2.27v-12.51c0-5.64,4.59-10.24,10.24-10.24h2.27c1.26,0,2.27-1.02,2.27-2.27s-1.02-2.27-2.27-2.27h0ZM175.38,33.05c-1.99,1.36-4.47,2.05-7.12,1.71-4.61-.59-8.31-4.35-8.84-8.97-.7-6.18,4.13-11.43,10.17-11.43,2.14,0,4.11.66,5.75,1.77.92.63,2.15.56,2.95-.24h0c1.02-1.02.83-2.7-.36-3.52-2.75-1.89-6.18-2.86-9.84-2.49-6.85.68-12.42,6.17-13.19,13.01-1,8.93,5.97,16.49,14.7,16.49,3.11,0,5.99-.95,8.36-2.59,1.18-.81,1.34-2.49.33-3.51h0c-.78-.78-2-.88-2.91-.26v.02h0Z" style="fill:#009789;"/></svg>

resources/images/OrcaSlicer_horizontal_light.svg

@@ -0,0 +1 @@
+<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" width="214" height="80" viewBox="0 0 214 80"><g id="b"><g id="c"><rect width="80" height="80" rx="9.57" ry="9.57" style="fill:#e9e9e9;"/></g></g><g id="d"><path id="e" d="M17.3,62.94c4.46,4.45,10.59,7.21,17.36,7.24,13.7.06,24.93-11.22,24.87-25-.03-6.81-2.77-12.97-7.2-17.45L17.31,62.94h0Z" style="fill:#292826;"/></g><g id="f"><path id="g" d="M52.32,27.73L17.3,62.94s.05.05.08.07c12.27-6.26,29.08-17.26,40.6-26.43-1.24-3.36-3.19-6.38-5.65-8.87" style="fill:#009789;"/></g><g id="h"><path id="i" d="M45.48,9.82c-13.67,0-24.77,11.15-24.77,24.91,0,6.85,2.75,13.05,7.2,17.56L62.94,17.07c-4.48-4.47-10.65-7.24-17.46-7.24" style="fill:#292826;"/></g><g id="j"><path id="k" d="M45.48,9.82c-4.74,0-9.17,1.34-12.93,3.65-2.02-.53-4.52-.95-7.39-.93-5,.03-9.08,1.39-11.85,2.65-.69.32-.58,1.33.16,1.49,1.82.39,4.22,1.19,6.59,2.95,1.5,1.1,2.64,2.33,3.5,3.48-1.82,3.47-2.85,7.42-2.85,11.61,0,2.5.37,4.92,1.05,7.2,1.04-2.32,2.14-3.87,2.5-4.36,2.27-3.13,4.68-4.76,8.23-7.15,2.62-1.77,6.26-3.84,16.7-8.14,0,0,3.27-.92,7.65-3.53,1.75-1.04,3.08-2.02,3.5-3.56.03-.11.06-.22.08-.32-4.15-3.17-9.33-5.04-14.95-5.04" style="fill:#262523;"/></g><g id="l"><path id="m" d="M49.61,18.19c.9,1.61-.91,4.37-4.06,6.17s-6.44,1.96-7.35.36c-.9-1.61.91-4.37,4.06-6.17,3.15-1.8,6.44-1.96,7.35-.36" style="fill:#fff;"/></g><path d="M142.44,48.1c-1.01,0-1.84.82-1.84,1.84v18.4c0,1.01.82,1.84,1.84,1.84s1.84-.82,1.84-1.84v-18.4c0-1.01-.82-1.84-1.84-1.84ZM190.71,48.1h-4.4c-6.09,0-11.04,4.96-11.04,11.04s4.96,11.04,11.04,11.04h4.4c1.01,0,1.84-.82,1.84-1.84s-.82-1.84-1.84-1.84h-4.4c-4.06,0-7.36-3.3-7.36-7.36s3.3-7.36,7.36-7.36h4.4c1.01,0,1.84-.82,1.84-1.84s-.82-1.84-1.84-1.84v-.02.02ZM190.71,57.31h-5.35c-1.01,0-1.84.82-1.84,1.84s.82,1.84,1.84,1.84h5.35c1.01,0,1.84-.82,1.84-1.84s-.82-1.84-1.84-1.84ZM105.69,70.18h-8.91c-1.01,0-1.83-.82-1.83-1.83s.81-1.83,1.83-1.83h8.91c1.53,0,2.78-1.24,2.78-2.78s-1.24-2.77-2.78-2.77h-4.31c-3.55,0-6.43-2.89-6.43-6.43s2.89-6.43,6.43-6.43h7.29c1.01,0,1.83.82,1.83,1.83s-.81,1.83-1.83,1.83h-7.29c-1.53,0-2.78,1.24-2.78,2.78s1.24,2.77,2.78,2.77h4.31c3.55,0,6.43,2.89,6.43,6.43s-2.89,6.43-6.43,6.43h0ZM165.89,65.28c-1.49.98-3.35,1.44-5.32,1.11-2.99-.51-5.4-2.88-5.96-5.85-.86-4.67,2.71-8.76,7.23-8.76,1.49,0,2.88.45,4.04,1.21.73.49,1.71.41,2.32-.22h0c.81-.81.71-2.17-.25-2.81-2.12-1.42-4.76-2.13-7.56-1.77-4.98.64-8.97,4.69-9.52,9.66-.75,6.65,4.46,12.32,10.96,12.32,2.23,0,4.31-.67,6.05-1.81.98-.65,1.15-2.03.32-2.86h0c-.63-.63-1.59-.71-2.32-.23h.01ZM132.24,66.5h-5.31c-2.53,0-4.6-2.07-4.6-4.6v-11.96c0-1.01-.82-1.84-1.84-1.84s-1.84.82-1.84,1.84v11.96c0,4.57,3.71,8.28,8.28,8.28h5.31c1.01,0,1.84-.82,1.84-1.84s-.82-1.84-1.84-1.84h0ZM211.96,51.79h-1.84c-4.03,0-7.32,3.27-7.36,7.3v9.27c0,1.01-.82,1.84-1.84,1.84s-1.84-.82-1.84-1.84v-9.27c.04-6.06,4.98-10.97,11.03-10.97h1.84c1.01,0,1.84.82,1.84,1.84s-.82,1.84-1.84,1.84h0Z" style="fill:#949494;"/><path d="M109.73,14.37c5.64,0,10.24,4.59,10.24,10.24s-4.59,10.24-10.24,10.24-10.24-4.59-10.24-10.24,4.59-10.24,10.24-10.24M109.73,9.82c-8.16,0-14.79,6.62-14.79,14.79s6.62,14.79,14.79,14.79,14.79-6.62,14.79-14.79-6.62-14.79-14.79-14.79h0ZM211.52,9.82c-1.26,0-2.27,1.02-2.27,2.27v1.86c-2.66-2.55-6.26-4.13-10.24-4.13-8.16,0-14.79,6.62-14.79,14.79s6.62,14.79,14.79,14.79c3.97,0,7.58-1.58,10.24-4.13v1.86c0,1.26,1.02,2.27,2.27,2.27s2.27-1.02,2.27-2.27V12.1c0-1.26-1.02-2.27-2.27-2.27h0ZM199.01,34.85c-5.64,0-10.24-4.59-10.24-10.24s4.59-10.24,10.24-10.24,10.24,4.59,10.24,10.24-4.59,10.24-10.24,10.24ZM148.11,9.82h-2.27c-8.16,0-14.79,6.62-14.79,14.79v12.51c0,1.26,1.02,2.27,2.27,2.27s2.27-1.02,2.27-2.27v-12.51c0-5.64,4.59-10.24,10.24-10.24h2.27c1.26,0,2.27-1.02,2.27-2.27s-1.02-2.27-2.27-2.27h0ZM175.38,33.05c-1.99,1.36-4.47,2.05-7.12,1.71-4.61-.59-8.31-4.35-8.84-8.97-.7-6.18,4.13-11.43,10.17-11.43,2.14,0,4.11.66,5.75,1.77.92.63,2.15.56,2.95-.24h0c1.02-1.02.83-2.7-.36-3.52-2.75-1.89-6.18-2.86-9.84-2.49-6.85.68-12.42,6.17-13.19,13.01-1,8.93,5.97,16.49,14.7,16.49,3.11,0,5.99-.95,8.36-2.59,1.18-.81,1.34-2.49.33-3.51h0c-.78-.78-2-.88-2.91-.26v.02h0Z" style="fill:#009789;"/></svg>

resources/images/param_junction_deviation.svg

@@ -0,0 +1,10 @@
+<svg xmlns="http://www.w3.org/2000/svg" width="18" height="18" viewBox="0 0 18 18">
+  <line x1="0.5" y1="4.5" x2="7.5" y2="4.5" style="fill:none;stroke:#949494;stroke-linecap:square;stroke-linejoin:round"/>
+  <line x1="15.5" y1="4.5" x2="16.5" y2="4.5" style="fill:none;stroke:#949494;stroke-linecap:square;stroke-linejoin:round"/>
+  <rect x="7.5" y="0.5" width="8" height="13" rx="1" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/>
+  <circle cx="11.5" cy="7.5" r="2" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/>
+  <polyline points="9.5 13.5 11.5 16.5 13.5 13.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/>
+
+  <path d="M1.5 6.2 L1.5 11.6 C1.5 14.0 3.0 15.5 5.4 15.5 L8.2 15.5"
+        style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/>
+</svg>

resources/printers/version.txt

@@ -1 +1 @@
-02.00.00.29
+02.00.00.30

resources/profiles/Afinia.json

@@ -1,6 +1,6 @@
 {
 	"name": "Afinia",
-	"version": "02.03.02.60",
+	"version": "02.04.00.00",
 	"force_update": "0",
 	"description": "Afinia configurations",
 	"machine_model_list": [

resources/profiles/Anker.json

@@ -1,6 +1,6 @@
 {
 	"name": "Anker",
-	"version": "02.03.02.60",
+	"version": "02.04.00.00",
 	"force_update": "0",
 	"description": "Anker configurations",
 	"machine_model_list": [

resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 Max 0.25 nozzle.json

@@ -0,0 +1,105 @@
+{
+	"type": "filament",
+	"name": "Anycubic ABS @Anycubic Kobra S1 Max 0.25 nozzle",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFABS",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic ABS @Anycubic Kobra S1 Max 0.25 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"ABS"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.25 nozzle"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"60"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"30"
+	],
+	"fan_cooling_layer_time_HS": [
+		"30"
+	],
+	"fan_max_speed_BRASS": [
+		"60"
+	],
+	"fan_max_speed_HS": [
+		"60"
+	],
+	"fan_min_speed_BRASS": [
+		"40"
+	],
+	"fan_min_speed_HS": [
+		"40"
+	],
+	"fan_speed_after_x_layers": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_BRASS": [
+		"270"
+	],
+	"nozzle_temperature_HS": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"pressure_advance": [
+		"0.032"
+	],
+	"slow_down_layer_time_BRASS": [
+		"12"
+	],
+	"temperature_vitrification": [
+		"100"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -0,0 +1,336 @@
+{
+	"type": "filament",
+	"name": "Anycubic ABS @Anycubic Kobra S1 Max 0.4 nozzle",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFABS",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic ABS @Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"ABS"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"16"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"65"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"30"
+	],
+	"fan_cooling_layer_time_HS": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_max_speed_BRASS": [
+		"60"
+	],
+	"fan_max_speed_HS": [
+		"60"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"fan_min_speed_BRASS": [
+		"10"
+	],
+	"fan_min_speed_HS": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"200"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode "
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_HS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.024"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_layer_time_BRASS": [
+		"6"
+	],
+	"slow_down_layer_time_HS": [
+		"6"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"100"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -0,0 +1,351 @@
+{
+	"type": "filament",
+	"name": "Anycubic ABS @Anycubic Kobra S1 Max 0.6 nozzle",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFABS",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic ABS @Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"ABS"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"20"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"65"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"30"
+	],
+	"fan_cooling_layer_time_HS": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_max_speed_BRASS": [
+		"80"
+	],
+	"fan_max_speed_HS": [
+		"80"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"fan_min_speed_BRASS": [
+		"30"
+	],
+	"fan_min_speed_HS": [
+		"30"
+	],
+	"filament_adhesiveness_category": [
+		"200"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_flush_temp": [
+		"nil"
+	],
+	"filament_flush_volumetric_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_HS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_layer_time_BRASS": [
+		"6"
+	],
+	"slow_down_layer_time_HS": [
+		"6"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"90"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -0,0 +1,351 @@
+{
+	"type": "filament",
+	"name": "Anycubic ABS @Anycubic Kobra S1 Max 0.8 nozzle",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFABS",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic ABS @Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"ABS"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"20"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"65"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"30"
+	],
+	"fan_cooling_layer_time_HS": [
+		"30"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_max_speed_BRASS": [
+		"80"
+	],
+	"fan_max_speed_HS": [
+		"80"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"fan_min_speed_BRASS": [
+		"30"
+	],
+	"fan_min_speed_HS": [
+		"30"
+	],
+	"filament_adhesiveness_category": [
+		"200"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_flush_temp": [
+		"nil"
+	],
+	"filament_flush_volumetric_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"60"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_HS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"6"
+	],
+	"slow_down_layer_time_HS": [
+		"6"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"100"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 Max 0.25 nozzle.json

@@ -0,0 +1,99 @@
+{
+	"type": "filament",
+	"name": "Anycubic ASA @Anycubic Kobra S1 Max 0.25 nozzle",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFASA",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic ASA @Anycubic Kobra S1 Max 0.25 nozzle"
+	],
+	"filament_type": [
+		"ASA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.25 nozzle"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"60"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"30"
+	],
+	"fan_cooling_layer_time_HS": [
+		"30"
+	],
+	"fan_max_speed_BRASS": [
+		"40"
+	],
+	"fan_max_speed_HS": [
+		"40"
+	],
+	"fan_min_speed_BRASS": [
+		"10"
+	],
+	"fan_min_speed_HS": [
+		"10"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_BRASS": [
+		"270"
+	],
+	"nozzle_temperature_HS": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"pressure_advance": [
+		"0.032"
+	],
+	"slow_down_layer_time_BRASS": [
+		"12"
+	],
+	"temperature_vitrification": [
+		"100"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -0,0 +1,336 @@
+{
+	"type": "filament",
+	"name": "Anycubic ASA @Anycubic Kobra S1 Max 0.4 nozzle",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFASA",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic ASA @Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"ASA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"15"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"65"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"30"
+	],
+	"fan_cooling_layer_time_HS": [
+		"30"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_max_speed_BRASS": [
+		"60"
+	],
+	"fan_max_speed_HS": [
+		"60"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"fan_min_speed_BRASS": [
+		"10"
+	],
+	"fan_min_speed_HS": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"200"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.06"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"110"
+	],
+	"hot_plate_temp_initial_layer": [
+		"110"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"nozzle_temperature_BRASS": [
+		"270"
+	],
+	"nozzle_temperature_HS": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.04"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_layer_time_BRASS": [
+		"6"
+	],
+	"slow_down_layer_time_HS": [
+		"6"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"100"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"110"
+	],
+	"textured_plate_temp_initial_layer": [
+		"110"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -0,0 +1,351 @@
+{
+	"type": "filament",
+	"name": "Anycubic ASA @Anycubic Kobra S1 Max 0.6 nozzle",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFASA",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic ASA @Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"ASA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"20"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"65"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"100"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"35"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"35"
+	],
+	"fan_cooling_layer_time_HS": [
+		"35"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_max_speed_BRASS": [
+		"80"
+	],
+	"fan_max_speed_HS": [
+		"100"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"fan_min_speed_BRASS": [
+		"30"
+	],
+	"fan_min_speed_HS": [
+		"30"
+	],
+	"filament_adhesiveness_category": [
+		"200"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_flush_temp": [
+		"nil"
+	],
+	"filament_flush_volumetric_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_HS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"3"
+	],
+	"slow_down_layer_time_BRASS": [
+		"8"
+	],
+	"slow_down_layer_time_HS": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"55"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -0,0 +1,351 @@
+{
+	"type": "filament",
+	"name": "Anycubic ASA @Anycubic Kobra S1 Max 0.8 nozzle",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFASA",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic ASA @Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"ASA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"20"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"65"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"30"
+	],
+	"fan_cooling_layer_time_HS": [
+		"30"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_max_speed_BRASS": [
+		"80"
+	],
+	"fan_max_speed_HS": [
+		"80"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"fan_min_speed_BRASS": [
+		"30"
+	],
+	"fan_min_speed_HS": [
+		"30"
+	],
+	"filament_adhesiveness_category": [
+		"200"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.06"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_flush_temp": [
+		"nil"
+	],
+	"filament_flush_volumetric_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"60"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_HS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"6"
+	],
+	"slow_down_layer_time_HS": [
+		"6"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"100"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PA @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -0,0 +1,336 @@
+{
+	"type": "filament",
+	"name": "Anycubic PA @Anycubic Kobra S1 Max 0.4 nozzle",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFPA",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PA @Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"1"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"60"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"65"
+	],
+	"fan_cooling_layer_time_HS": [
+		"65"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"fan_max_speed_BRASS": [
+		"90"
+	],
+	"fan_max_speed_HS": [
+		"90"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"fan_min_speed_BRASS": [
+		"40"
+	],
+	"fan_min_speed_HS": [
+		"40"
+	],
+	"filament_adhesiveness_category": [
+		"400"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_lift_above": [
+		"0"
+	],
+	"filament_retract_lift_below": [
+		"349"
+	],
+	"filament_retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Auto Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_BRASS": [
+		"280"
+	],
+	"nozzle_temperature_HS": [
+		"280"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"280"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"280"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.04"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"2"
+	],
+	"slow_down_layer_time_BRASS": [
+		"8"
+	],
+	"slow_down_layer_time_HS": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"108"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PA @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -0,0 +1,351 @@
+{
+	"type": "filament",
+	"name": "Anycubic PA @Anycubic Kobra S1 Max 0.6 nozzle",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFPA",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PA @Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"60"
+	],
+	"chamber_temperature": [
+		"40"
+	],
+	"close_fan_the_first_x_layers": [
+		"2"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"65"
+	],
+	"fan_cooling_layer_time_HS": [
+		"65"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_max_speed_BRASS": [
+		"90"
+	],
+	"fan_max_speed_HS": [
+		"90"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"fan_min_speed_BRASS": [
+		"40"
+	],
+	"fan_min_speed_HS": [
+		"40"
+	],
+	"filament_adhesiveness_category": [
+		"400"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_flush_temp": [
+		"nil"
+	],
+	"filament_flush_volumetric_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_HS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"8"
+	],
+	"slow_down_layer_time_HS": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"55"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PA @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -0,0 +1,351 @@
+{
+	"type": "filament",
+	"name": "Anycubic PA @Anycubic Kobra S1 Max 0.8 nozzle",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFPA",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PA @Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"60"
+	],
+	"close_fan_the_first_x_layers": [
+		"2"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"65"
+	],
+	"fan_cooling_layer_time_HS": [
+		"65"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_max_speed_BRASS": [
+		"90"
+	],
+	"fan_max_speed_HS": [
+		"90"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"fan_min_speed_BRASS": [
+		"40"
+	],
+	"fan_min_speed_HS": [
+		"40"
+	],
+	"filament_adhesiveness_category": [
+		"400"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_flush_temp": [
+		"nil"
+	],
+	"filament_flush_volumetric_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.4"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_HS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.026"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"8"
+	],
+	"slow_down_layer_time_HS": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"10"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"108"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PA6-CF @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -0,0 +1,336 @@
+{
+	"type": "filament",
+	"name": "Anycubic PA6-CF @Anycubic Kobra S1 Max 0.4 nozzle",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFPA6-CF",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PA6-CF @Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PA6-CF"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"65"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"5"
+	],
+	"fan_cooling_layer_time_HS": [
+		"5"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"fan_max_speed_BRASS": [
+		"30"
+	],
+	"fan_max_speed_HS": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"fan_min_speed_BRASS": [
+		"10"
+	],
+	"fan_min_speed_HS": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"400"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"110"
+	],
+	"hot_plate_temp_initial_layer": [
+		"110"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_HS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"260"
+	],
+	"overhang_fan_speed": [
+		"40"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.025"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"6"
+	],
+	"slow_down_layer_time_BRASS": [
+		"2"
+	],
+	"slow_down_layer_time_HS": [
+		"2"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"170"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"110"
+	],
+	"textured_plate_temp_initial_layer": [
+		"110"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PA6-CF @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -0,0 +1,351 @@
+{
+	"type": "filament",
+	"name": "Anycubic PA6-CF @Anycubic Kobra S1 Max 0.6 nozzle",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFPA6-CF",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PA6-CF @Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PA6-CF"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"65"
+	],
+	"close_fan_the_first_x_layers": [
+		"2"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"5"
+	],
+	"fan_cooling_layer_time_HS": [
+		"5"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_max_speed_BRASS": [
+		"30"
+	],
+	"fan_max_speed_HS": [
+		"30"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"fan_min_speed_BRASS": [
+		"10"
+	],
+	"fan_min_speed_HS": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"400"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_flush_temp": [
+		"nil"
+	],
+	"filament_flush_volumetric_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_HS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"260"
+	],
+	"overhang_fan_speed": [
+		"60"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"2"
+	],
+	"slow_down_layer_time_HS": [
+		"2"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"55"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"110"
+	],
+	"textured_plate_temp_initial_layer": [
+		"110"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PA6-CF @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -0,0 +1,351 @@
+{
+	"type": "filament",
+	"name": "Anycubic PA6-CF @Anycubic Kobra S1 Max 0.8 nozzle",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFPA6-CF",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PA6-CF @Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PA6-CF"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"65"
+	],
+	"close_fan_the_first_x_layers": [
+		"2"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"5"
+	],
+	"fan_cooling_layer_time_HS": [
+		"5"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_max_speed_BRASS": [
+		"30"
+	],
+	"fan_max_speed_HS": [
+		"30"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"fan_min_speed_BRASS": [
+		"10"
+	],
+	"fan_min_speed_HS": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"0"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.1"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_flush_temp": [
+		"nil"
+	],
+	"filament_flush_volumetric_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_HS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"260"
+	],
+	"overhang_fan_speed": [
+		"60"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.025"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"2"
+	],
+	"slow_down_layer_time_HS": [
+		"2"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"55"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"110"
+	],
+	"textured_plate_temp_initial_layer": [
+		"110"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -0,0 +1,336 @@
+{
+	"type": "filament",
+	"name": "Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.4 nozzle",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFPAHT-CF",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PAHT-CF"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"60"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"5"
+	],
+	"fan_cooling_layer_time_HS": [
+		"5"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"fan_max_speed_BRASS": [
+		"30"
+	],
+	"fan_max_speed_HS": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"fan_min_speed_BRASS": [
+		"10"
+	],
+	"fan_min_speed_HS": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"400"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"80"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_BRASS": [
+		"280"
+	],
+	"nozzle_temperature_HS": [
+		"280"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"280"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"280"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"260"
+	],
+	"overhang_fan_speed": [
+		"30"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.025"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"30"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"6"
+	],
+	"slow_down_layer_time_BRASS": [
+		"2"
+	],
+	"slow_down_layer_time_HS": [
+		"2"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"180"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -0,0 +1,351 @@
+{
+	"type": "filament",
+	"name": "Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.6 nozzle",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFPAHT-CF",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PAHT-CF"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"65"
+	],
+	"close_fan_the_first_x_layers": [
+		"2"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"5"
+	],
+	"fan_cooling_layer_time_HS": [
+		"5"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_max_speed_BRASS": [
+		"30"
+	],
+	"fan_max_speed_HS": [
+		"30"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"fan_min_speed_BRASS": [
+		"10"
+	],
+	"fan_min_speed_HS": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"500"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_flush_temp": [
+		"nil"
+	],
+	"filament_flush_volumetric_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_BRASS": [
+		"280"
+	],
+	"nozzle_temperature_HS": [
+		"280"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"280"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"280"
+	],
+	"nozzle_temperature_range_high": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"260"
+	],
+	"overhang_fan_speed": [
+		"60"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"2"
+	],
+	"slow_down_layer_time_HS": [
+		"2"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"0"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"110"
+	],
+	"textured_plate_temp_initial_layer": [
+		"110"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -0,0 +1,351 @@
+{
+	"type": "filament",
+	"name": "Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.8 nozzle",
+	"inherits": "fdm_filament_pa",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFPAHT-CF",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PAHT-CF @Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PAHT-CF"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"65"
+	],
+	"close_fan_the_first_x_layers": [
+		"2"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"5"
+	],
+	"fan_cooling_layer_time_HS": [
+		"5"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_max_speed_BRASS": [
+		"30"
+	],
+	"fan_max_speed_HS": [
+		"30"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"fan_min_speed_BRASS": [
+		"10"
+	],
+	"fan_min_speed_HS": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"500"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_flush_temp": [
+		"nil"
+	],
+	"filament_flush_volumetric_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.4"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_BRASS": [
+		"280"
+	],
+	"nozzle_temperature_HS": [
+		"280"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"280"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"280"
+	],
+	"nozzle_temperature_range_high": [
+		"320"
+	],
+	"nozzle_temperature_range_low": [
+		"260"
+	],
+	"overhang_fan_speed": [
+		"60"
+	],
+	"overhang_fan_threshold": [
+		"0%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.026"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"2"
+	],
+	"slow_down_layer_time_HS": [
+		"2"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"180"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"110"
+	],
+	"textured_plate_temp_initial_layer": [
+		"110"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PC @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -0,0 +1,336 @@
+{
+	"type": "filament",
+	"name": "Anycubic PC @Anycubic Kobra S1 Max 0.4 nozzle",
+	"inherits": "fdm_filament_pc",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFPC",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PC @Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PC"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"60"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"30"
+	],
+	"fan_cooling_layer_time_HS": [
+		"30"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_max_speed_BRASS": [
+		"60"
+	],
+	"fan_max_speed_HS": [
+		"60"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"fan_min_speed_BRASS": [
+		"10"
+	],
+	"fan_min_speed_HS": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"500"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode "
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"110"
+	],
+	"hot_plate_temp_initial_layer": [
+		"110"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_HS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"60"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.04"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"2"
+	],
+	"slow_down_layer_time_BRASS": [
+		"2"
+	],
+	"slow_down_layer_time_HS": [
+		"2"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"120"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"110"
+	],
+	"textured_plate_temp_initial_layer": [
+		"110"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PC @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -0,0 +1,354 @@
+{
+	"type": "filament",
+	"name": "Anycubic PC @Anycubic Kobra S1 Max 0.6 nozzle",
+	"inherits": "fdm_filament_pc",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFPC",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PC @Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PC"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"65"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"30"
+	],
+	"fan_cooling_layer_time_HS": [
+		"30"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_max_speed_BRASS": [
+		"60"
+	],
+	"fan_max_speed_HS": [
+		"60"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"fan_min_speed_BRASS": [
+		"10"
+	],
+	"fan_min_speed_HS": [
+		"10"
+	],
+	"fan_speed_after_x_layers": [
+		"0"
+	],
+	"filament_adhesiveness_category": [
+		"500"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_flush_temp": [
+		"nil"
+	],
+	"filament_flush_volumetric_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"110"
+	],
+	"hot_plate_temp_initial_layer": [
+		"110"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_HS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"2"
+	],
+	"slow_down_layer_time_HS": [
+		"2"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"55"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"110"
+	],
+	"textured_plate_temp_initial_layer": [
+		"110"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PC @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -0,0 +1,351 @@
+{
+	"type": "filament",
+	"name": "Anycubic PC @Anycubic Kobra S1 Max 0.8 nozzle",
+	"inherits": "fdm_filament_pc",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFPC",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PC @Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PC"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"65"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"30"
+	],
+	"fan_cooling_layer_time_HS": [
+		"30"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_max_speed_BRASS": [
+		"60"
+	],
+	"fan_max_speed_HS": [
+		"60"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"fan_min_speed_BRASS": [
+		"10"
+	],
+	"fan_min_speed_HS": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"500"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_flush_temp": [
+		"nil"
+	],
+	"filament_flush_volumetric_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"110"
+	],
+	"hot_plate_temp_initial_layer": [
+		"110"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"100"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_HS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.025"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"2"
+	],
+	"slow_down_layer_time_HS": [
+		"2"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"120"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"110"
+	],
+	"textured_plate_temp_initial_layer": [
+		"110"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PC-CF @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -0,0 +1,336 @@
+{
+	"type": "filament",
+	"name": "Anycubic PC-CF @Anycubic Kobra S1 Max 0.4 nozzle",
+	"inherits": "fdm_filament_pc",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFPC-CF",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PC-CF @Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PC-CF"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"60"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"30"
+	],
+	"fan_cooling_layer_time_HS": [
+		"30"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_max_speed_BRASS": [
+		"40"
+	],
+	"fan_max_speed_HS": [
+		"40"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"fan_min_speed_BRASS": [
+		"10"
+	],
+	"fan_min_speed_HS": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"500"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode "
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"110"
+	],
+	"hot_plate_temp_initial_layer": [
+		"110"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_BRASS": [
+		"270"
+	],
+	"nozzle_temperature_HS": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"60"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.04"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"2"
+	],
+	"slow_down_layer_time_BRASS": [
+		"12"
+	],
+	"slow_down_layer_time_HS": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"120"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"110"
+	],
+	"textured_plate_temp_initial_layer": [
+		"110"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PC-CF @Anycubic Kobra S1 Max 0.6 nozzle.json

@@ -0,0 +1,354 @@
+{
+	"type": "filament",
+	"name": "Anycubic PC-CF @Anycubic Kobra S1 Max 0.6 nozzle",
+	"inherits": "fdm_filament_pc",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFPC-CF",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PC-CF @Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PC-CF"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"65"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"30"
+	],
+	"fan_cooling_layer_time_HS": [
+		"30"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_max_speed_BRASS": [
+		"40"
+	],
+	"fan_max_speed_HS": [
+		"40"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"fan_min_speed_BRASS": [
+		"10"
+	],
+	"fan_min_speed_HS": [
+		"10"
+	],
+	"fan_speed_after_x_layers": [
+		"0"
+	],
+	"filament_adhesiveness_category": [
+		"500"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_flush_temp": [
+		"nil"
+	],
+	"filament_flush_volumetric_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"110"
+	],
+	"hot_plate_temp_initial_layer": [
+		"110"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_BRASS": [
+		"270"
+	],
+	"nozzle_temperature_HS": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"60"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"12"
+	],
+	"slow_down_layer_time_HS": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"55"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"110"
+	],
+	"textured_plate_temp_initial_layer": [
+		"110"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PC-CF @Anycubic Kobra S1 Max 0.8 nozzle.json

@@ -0,0 +1,351 @@
+{
+	"type": "filament",
+	"name": "Anycubic PC-CF @Anycubic Kobra S1 Max 0.8 nozzle",
+	"inherits": "fdm_filament_pc",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFPC-CF",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PC-CF @Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PC-CF"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"65"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"30"
+	],
+	"fan_cooling_layer_time_HS": [
+		"30"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_max_speed_BRASS": [
+		"40"
+	],
+	"fan_max_speed_HS": [
+		"40"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"fan_min_speed_BRASS": [
+		"10"
+	],
+	"fan_min_speed_HS": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"500"
+	],
+	"filament_change_length": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_flush_temp": [
+		"nil"
+	],
+	"filament_flush_volumetric_speed": [
+		"nil"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_prime_volume": [
+		"45"
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"110"
+	],
+	"hot_plate_temp_initial_layer": [
+		"110"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_BRASS": [
+		"270"
+	],
+	"nozzle_temperature_HS": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.025"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"12"
+	],
+	"slow_down_layer_time_HS": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"120"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"110"
+	],
+	"textured_plate_temp_initial_layer": [
+		"110"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PC-GF @Anycubic Kobra S1 Max 0.4 nozzle.json

@@ -0,0 +1,336 @@
+{
+	"type": "filament",
+	"name": "Anycubic PC-GF @Anycubic Kobra S1 Max 0.4 nozzle",
+	"inherits": "fdm_filament_pc",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFPC-GF",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PC-GF @Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PC-GF"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra S1 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"1"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"chamber_temperature": [
+		"60"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"5"
+	],
+	"cool_plate_temp": [
+		"0"
+	],
+	"cool_plate_temp_initial_layer": [
+		"0"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"5"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"30"
+	],
+	"fan_cooling_layer_time_HS": [
+		"30"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_max_speed_BRASS": [
+		"40"
+	],
+	"fan_max_speed_HS": [
+		"40"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"fan_min_speed_BRASS": [
+		"10"
+	],
+	"fan_min_speed_HS": [
+		"10"
+	],
+	"filament_adhesiveness_category": [
+		"500"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode "
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"110"
+	],
+	"hot_plate_temp_initial_layer": [
+		"110"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_BRASS": [
+		"270"
+	],
+	"nozzle_temperature_HS": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer_BRASS": [
+		"270"
+	],
+	"nozzle_temperature_initial_layer_HS": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"300"
+	],
+	"nozzle_temperature_range_low": [
+		"250"
+	],
+	"overhang_fan_speed": [
+		"60"
+	],
+	"overhang_fan_threshold": [
+		"25%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.04"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"3"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"2"
+	],
+	"slow_down_layer_time_BRASS": [
+		"12"
+	],
+	"slow_down_layer_time_HS": [
+		"12"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"120"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"110"
+	],
+	"textured_plate_temp_initial_layer": [
+		"110"
+	]
+}