Updated libtool

2026-05-17 00:16:02 +03:00 · 2022-11-20 19:26:06 +01:00
parent ce0f63d0b2
commit 62ebf75826
18 changed files with 6523 additions and 4205 deletions
--- a/316
+++ b/316
@@ -1,8 +1,8 @@
 Installation Instructions
 *************************

-Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
-Inc.
+   Copyright (C) 1994-1996, 1999-2002, 2004-2016 Free Software
+Foundation, Inc.

   Copying and distribution of this file, with or without modification,
 are permitted in any medium without royalty provided the copyright
@@ -12,97 +12,96 @@ without warranty of any kind.
 Basic Installation
 ==================

-   Briefly, the shell command `./configure && make && make install'
+   Briefly, the shell command './configure && make && make install'
 should configure, build, and install this package.  The following
-more-detailed instructions are generic; see the `README' file for
+more-detailed instructions are generic; see the 'README' file for
 instructions specific to this package.  Some packages provide this
-`INSTALL' file but do not implement all of the features documented
+'INSTALL' file but do not implement all of the features documented
 below.  The lack of an optional feature in a given package is not
 necessarily a bug.  More recommendations for GNU packages can be found
 in *note Makefile Conventions: (standards)Makefile Conventions.

-   The `configure' shell script attempts to guess correct values for
+   The 'configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
+those values to create a 'Makefile' in each directory of the package.
+It may also create one or more '.h' files containing system-dependent
+definitions.  Finally, it creates a shell script 'config.status' that
 you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
+file 'config.log' containing compiler output (useful mainly for
+debugging 'configure').

-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
+   It can also use an optional file (typically called 'config.cache' and
+enabled with '--cache-file=config.cache' or simply '-C') that saves the
+results of its tests to speed up reconfiguring.  Caching is disabled by
+default to prevent problems with accidental use of stale cache files.

   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
+to figure out how 'configure' could check whether to do them, and mail
+diffs or instructions to the address given in the 'README' so they can
 be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
+some point 'config.cache' contains results you don't want to keep, you
 may remove or edit it.

-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
+   The file 'configure.ac' (or 'configure.in') is used to create
+'configure' by a program called 'autoconf'.  You need 'configure.ac' if
+you want to change it or regenerate 'configure' using a newer version of
+'autoconf'.

   The simplest way to compile this package is:

-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.
+  1. 'cd' to the directory containing the package's source code and type
+     './configure' to configure the package for your system.

-     Running `configure' might take a while.  While running, it prints
+     Running 'configure' might take a while.  While running, it prints
     some messages telling which features it is checking for.

-  2. Type `make' to compile the package.
+  2. Type 'make' to compile the package.

-  3. Optionally, type `make check' to run any self-tests that come with
+  3. Optionally, type 'make check' to run any self-tests that come with
     the package, generally using the just-built uninstalled binaries.

-  4. Type `make install' to install the programs and any data files and
+  4. Type 'make install' to install the programs and any data files and
     documentation.  When installing into a prefix owned by root, it is
     recommended that the package be configured and built as a regular
-     user, and only the `make install' phase executed with root
+     user, and only the 'make install' phase executed with root
     privileges.

-  5. Optionally, type `make installcheck' to repeat any self-tests, but
+  5. Optionally, type 'make installcheck' to repeat any self-tests, but
     this time using the binaries in their final installed location.
     This target does not install anything.  Running this target as a
-     regular user, particularly if the prior `make install' required
+     regular user, particularly if the prior 'make install' required
     root privileges, verifies that the installation completed
     correctly.

  6. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
+     source code directory by typing 'make clean'.  To also remove the
+     files that 'configure' created (so you can compile the package for
+     a different kind of computer), type 'make distclean'.  There is
+     also a 'make maintainer-clean' target, but that is intended mainly
     for the package's developers.  If you use it, you may have to get
     all sorts of other programs in order to regenerate files that came
     with the distribution.

-  7. Often, you can also type `make uninstall' to remove the installed
+  7. Often, you can also type 'make uninstall' to remove the installed
     files again.  In practice, not all packages have tested that
     uninstallation works correctly, even though it is required by the
     GNU Coding Standards.

-  8. Some packages, particularly those that use Automake, provide `make
+  8. Some packages, particularly those that use Automake, provide 'make
     distcheck', which can by used by developers to test that all other
-     targets like `make install' and `make uninstall' work correctly.
+     targets like 'make install' and 'make uninstall' work correctly.
     This target is generally not run by end users.

 Compilers and Options
 =====================

   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
+the 'configure' script does not know about.  Run './configure --help'
 for details on some of the pertinent environment variables.

-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
+   You can give 'configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here is
+an example:

     ./configure CC=c99 CFLAGS=-g LIBS=-lposix

@@ -113,21 +112,21 @@ Compiling For Multiple Architectures

   You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you can use GNU `make'.  `cd' to the
+own directory.  To do this, you can use GNU 'make'.  'cd' to the
 directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.  This
-is known as a "VPATH" build.
+the 'configure' script.  'configure' automatically checks for the source
+code in the directory that 'configure' is in and in '..'.  This is known
+as a "VPATH" build.

-   With a non-GNU `make', it is safer to compile the package for one
+   With a non-GNU 'make', it is safer to compile the package for one
 architecture at a time in the source code directory.  After you have
-installed the package for one architecture, use `make distclean' before
+installed the package for one architecture, use 'make distclean' before
 reconfiguring for another architecture.

   On MacOS X 10.5 and later systems, you can create libraries and
 executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor.  Like
+"universal" binaries--by specifying multiple '-arch' options to the
+compiler but only a single '-arch' option to the preprocessor.  Like
 this:

     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
@@ -136,105 +135,104 @@ this:

   This is not guaranteed to produce working output in all cases, you
 may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
+using the 'lipo' tool if you have problems.

 Installation Names
 ==================

-   By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
+   By default, 'make install' installs the package's commands under
+'/usr/local/bin', include files under '/usr/local/include', etc.  You
+can specify an installation prefix other than '/usr/local' by giving
+'configure' the option '--prefix=PREFIX', where PREFIX must be an
 absolute file name.

   You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+pass the option '--exec-prefix=PREFIX' to 'configure', the package uses
 PREFIX as the prefix for installing programs and libraries.
 Documentation and other data files still use the regular prefix.

   In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.  In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
+options like '--bindir=DIR' to specify different values for particular
+kinds of files.  Run 'configure --help' for a list of the directories
+you can set and what kinds of files go in them.  In general, the default
+for these options is expressed in terms of '${prefix}', so that
+specifying just '--prefix' will affect all of the other directory
 specifications that were not explicitly provided.

   The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
+correct locations to 'configure'; however, many packages provide one or
 both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
+'make install' command line to change installation locations without
 having to reconfigure or recompile.

   The first method involves providing an override variable for each
-affected directory.  For example, `make install
+affected directory.  For example, 'make install
 prefix=/alternate/directory' will choose an alternate location for all
 directory configuration variables that were expressed in terms of
-`${prefix}'.  Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated.  The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
+'${prefix}'.  Any directories that were specified during 'configure',
+but not in terms of '${prefix}', must each be overridden at install time
+for the entire installation to be relocated.  The approach of makefile
+variable overrides for each directory variable is required by the GNU
+Coding Standards, and ideally causes no recompilation.  However, some
+platforms have known limitations with the semantics of shared libraries
+that end up requiring recompilation when using this method, particularly
+noticeable in packages that use GNU Libtool.

-   The second method involves providing the `DESTDIR' variable.  For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names.  The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
+   The second method involves providing the 'DESTDIR' variable.  For
+example, 'make install DESTDIR=/alternate/directory' will prepend
+'/alternate/directory' before all installation names.  The approach of
+'DESTDIR' overrides is not required by the GNU Coding Standards, and
 does not work on platforms that have drive letters.  On the other hand,
 it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
+when some directory options were not specified in terms of '${prefix}'
+at 'configure' time.

 Optional Features
 =================

   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+with an extra prefix or suffix on their names by giving 'configure' the
+option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'.

-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
+   Some packages pay attention to '--enable-FEATURE' options to
+'configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to '--with-PACKAGE' options, where PACKAGE
+is something like 'gnu-as' or 'x' (for the X Window System).  The
+'README' should mention any '--enable-' and '--with-' options that the
 package recognizes.

-   For packages that use the X Window System, `configure' can usually
+   For packages that use the X Window System, 'configure' can usually
 find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
+you can use the 'configure' options '--x-includes=DIR' and
+'--x-libraries=DIR' to specify their locations.

   Some packages offer the ability to configure how verbose the
-execution of `make' will be.  For these packages, running `./configure
+execution of 'make' will be.  For these packages, running './configure
 --enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
+overridden with 'make V=1'; while running './configure
 --disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
+overridden with 'make V=0'.

 Particular systems
 ==================

-   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
-CC is not installed, it is recommended to use the following options in
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU CC
+is not installed, it is recommended to use the following options in
 order to use an ANSI C compiler:

     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"

 and if that doesn't work, install pre-built binaries of GCC for HP-UX.

-   HP-UX `make' updates targets which have the same time stamps as
-their prerequisites, which makes it generally unusable when shipped
-generated files such as `configure' are involved.  Use GNU `make'
-instead.
+   HP-UX 'make' updates targets which have the same time stamps as their
+prerequisites, which makes it generally unusable when shipped generated
+files such as 'configure' are involved.  Use GNU 'make' instead.

   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
-a workaround.  If GNU CC is not installed, it is therefore recommended
-to try
+parse its '<wchar.h>' header file.  The option '-nodtk' can be used as a
+workaround.  If GNU CC is not installed, it is therefore recommended to
+try

     ./configure CC="cc"

@@ -242,26 +240,26 @@ and if that doesn't work, try

     ./configure CC="cc -nodtk"

-   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
+   On Solaris, don't put '/usr/ucb' early in your 'PATH'.  This
 directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
+these programs are available in '/usr/bin'.  So, if you need '/usr/ucb'
+in your 'PATH', put it _after_ '/usr/bin'.

-   On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'.  It is recommended to use the following options:
+   On Haiku, software installed for all users goes in '/boot/common',
+not '/usr/local'.  It is recommended to use the following options:

     ./configure --prefix=/boot/common

 Specifying the System Type
 ==========================

-   There may be some features `configure' cannot figure out
+   There may be some features 'configure' cannot figure out
 automatically, but needs to determine by the type of machine the package
 will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
+_same_ architectures, 'configure' can figure that out, but if it prints
 a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
+'--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as 'sun4', or a canonical name which has the form:

     CPU-COMPANY-SYSTEM

@@ -270,101 +268,101 @@ where SYSTEM can have one of these forms:
     OS
     KERNEL-OS

-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
+   See the file 'config.sub' for the possible values of each field.  If
+'config.sub' isn't included in this package, then this package doesn't
 need to know the machine type.

   If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
+use the option '--target=TYPE' to select the type of system they will
 produce code for.

   If you want to _use_ a cross compiler, that generates code for a
 platform different from the build platform, you should specify the
 "host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
+eventually be run) with '--host=TYPE'.

 Sharing Defaults
 ================

-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
+   If you want to set default values for 'configure' scripts to share,
+you can create a site shell script called 'config.site' that gives
+default values for variables like 'CC', 'cache_file', and 'prefix'.
+'configure' looks for 'PREFIX/share/config.site' if it exists, then
+'PREFIX/etc/config.site' if it exists.  Or, you can set the
+'CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all 'configure' scripts look for a site script.

 Defining Variables
 ==================

   Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
+environment passed to 'configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
+them in the 'configure' command line, using 'VAR=value'.  For example:

     ./configure CC=/usr/local2/bin/gcc

-causes the specified `gcc' to be used as the C compiler (unless it is
+causes the specified 'gcc' to be used as the C compiler (unless it is
 overridden in the site shell script).

-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf limitation.  Until the limitation is lifted, you can use
-this workaround:
+Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an
+Autoconf limitation.  Until the limitation is lifted, you can use this
+workaround:

     CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash

-`configure' Invocation
+'configure' Invocation
 ======================

-   `configure' recognizes the following options to control how it
+   'configure' recognizes the following options to control how it
 operates.

-`--help'
-`-h'
-     Print a summary of all of the options to `configure', and exit.
+'--help'
+'-h'
+     Print a summary of all of the options to 'configure', and exit.

-`--help=short'
-`--help=recursive'
+'--help=short'
+'--help=recursive'
     Print a summary of the options unique to this package's
-     `configure', and exit.  The `short' variant lists options used
-     only in the top level, while the `recursive' variant lists options
-     also present in any nested packages.
+     'configure', and exit.  The 'short' variant lists options used only
+     in the top level, while the 'recursive' variant lists options also
+     present in any nested packages.

-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
+'--version'
+'-V'
+     Print the version of Autoconf used to generate the 'configure'
     script, and exit.

-`--cache-file=FILE'
+'--cache-file=FILE'
     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     traditionally 'config.cache'.  FILE defaults to '/dev/null' to
     disable caching.

-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
+'--config-cache'
+'-C'
+     Alias for '--cache-file=config.cache'.

-`--quiet'
-`--silent'
-`-q'
+'--quiet'
+'--silent'
+'-q'
     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
+     suppress all normal output, redirect it to '/dev/null' (any error
     messages will still be shown).

-`--srcdir=DIR'
+'--srcdir=DIR'
     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
+     'configure' can determine that directory automatically.

-`--prefix=DIR'
-     Use DIR as the installation prefix.  *note Installation Names::
-     for more details, including other options available for fine-tuning
-     the installation locations.
+'--prefix=DIR'
+     Use DIR as the installation prefix.  *note Installation Names:: for
+     more details, including other options available for fine-tuning the
+     installation locations.

-`--no-create'
-`-n'
+'--no-create'
+'-n'
     Run the configure checks, but stop before creating any output
     files.

-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
+'configure' also accepts some other, not widely useful, options.  Run
+'configure --help' for more details.
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.16.3 from Makefile.am.
 # @configure_input@

-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2020 Free Software Foundation, Inc.

 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -14,7 +14,17 @@

@SET_MAKE@
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
@@ -78,11 +88,6 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = .
-DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
-	$(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(top_srcdir)/configure $(am__configure_deps) \
-	$(srcdir)/config.h.in COPYING compile config.guess config.sub \
-	depcomp install-sh missing ltmain.sh
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
@@ -91,6 +96,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+	$(am__configure_deps) $(am__DIST_COMMON)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
@@ -131,9 +138,9 @@ am__recursive_targets = \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	cscope distdir dist dist-all distcheck
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
-	$(LISP)config.h.in
+	cscope distdir distdir-am dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
+	config.h.in
 # Read a list of newline-separated strings from the standard input,
 # and print each of them once, without duplicates.  Input order is
 # *not* preserved.
@@ -154,6 +161,9 @@ ETAGS = etags
 CTAGS = ctags
 CSCOPE = cscope
 DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in AUTHORS \
+	COPYING ChangeLog INSTALL NEWS README compile config.guess \
+	config.sub depcomp install-sh ltmain.sh missing
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
@@ -192,6 +202,8 @@ am__relativize = \
 DIST_ARCHIVES = $(distdir).tar.gz
 GZIP_ENV = --best
 DIST_TARGETS = dist-gzip
+# Exists only to be overridden by the user if desired.
+AM_DISTCHECK_DVI_TARGET = dvi
 distuninstallcheck_listfiles = find . -type f -print
 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
@@ -208,7 +220,6 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
 CYGPATH_W = @CYGPATH_W@
@@ -227,7 +238,6 @@ EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
 HTTPS_SUPPORT = @HTTPS_SUPPORT@
 ICONV_LIBS = @ICONV_LIBS@
 INSTALL = @INSTALL@
@@ -245,6 +255,7 @@ LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_CV_OBJDIR = @LT_CV_OBJDIR@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -321,6 +332,7 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
+runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
@@ -354,15 +366,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    echo ' $(SHELL) ./config.status'; \
 	    $(SHELL) ./config.status;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
 	esac;

 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -504,7 +515,10 @@ distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

-distdir: $(DISTFILES)
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
 	$(am__remove_distdir)
 	test -d "$(distdir)" || mkdir "$(distdir)"
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
@@ -569,7 +583,7 @@ distdir: $(DISTFILES)
 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
 	$(am__post_remove_distdir)

 dist-bzip2: distdir
@@ -584,18 +598,22 @@ dist-xz: distdir
 	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
 	$(am__post_remove_distdir)

+dist-zstd: distdir
+	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
+	$(am__post_remove_distdir)
+
 dist-tarZ: distdir
-	@echo WARNING: "Support for shar distribution archives is" \
-	               "deprecated." >&2
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
 	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__post_remove_distdir)

 dist-shar: distdir
-	@echo WARNING: "Support for distribution archives compressed with" \
-		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
 	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
 	$(am__post_remove_distdir)

 dist-zip: distdir
@@ -613,7 +631,7 @@ dist dist-all:
 distcheck: dist
 	case '$(DIST_ARCHIVES)' in \
 	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 	*.tar.lz*) \
@@ -623,25 +641,27 @@ distcheck: dist
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
+	*.tar.zst*) \
+	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
 	esac
 	chmod -R a-w $(distdir)
 	chmod u+w $(distdir)
-	mkdir $(distdir)/_build $(distdir)/_inst
+	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
 	chmod a-w $(distdir)
 	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build \
-	  && ../configure \
+	  && $(am__cd) $(distdir)/_build/sub \
+	  && ../../configure \
 	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	    --srcdir=.. --prefix="$$dc_install_base" \
+	    --srcdir=../.. --prefix="$$dc_install_base" \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
 	  && $(MAKE) $(AM_MAKEFLAGS) check \
 	  && $(MAKE) $(AM_MAKEFLAGS) install \
 	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
@@ -803,18 +823,20 @@ uninstall-am:
 	am--refresh check check-am clean clean-cscope clean-generic \
 	clean-libtool cscope cscopelist-am ctags ctags-am dist \
 	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
-	dist-xz dist-zip distcheck distclean distclean-generic \
-	distclean-hdr distclean-libtool distclean-tags distcleancheck \
-	distdir distuninstallcheck dvi dvi-am html html-am info \
-	info-am install install-am install-data install-data-am \
-	install-dvi install-dvi-am install-exec install-exec-am \
-	install-html install-html-am install-info install-info-am \
-	install-man install-pdf install-pdf-am install-ps \
-	install-ps-am install-strip installcheck installcheck-am \
-	installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
-	uninstall-am
+	dist-xz dist-zip dist-zstd distcheck distclean \
+	distclean-generic distclean-hdr distclean-libtool \
+	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs installdirs-am \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile


 # Tell versions [3.59,3.63) of GNU make to not export all variables.
--- a/17
+++ b/17
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Wrapper for compilers which do not understand '-c -o'.

-scriptversion=2012-10-14.11; # UTC
+scriptversion=2018-03-07.03; # UTC

-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2020 Free Software Foundation, Inc.
 # Written by Tom Tromey <tromey@cygnus.com>.
 #
 # This program is free software; you can redistribute it and/or modify
@@ -17,7 +17,7 @@ scriptversion=2012-10-14.11; # UTC
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.

 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -53,7 +53,7 @@ func_file_conv ()
 	  MINGW*)
 	    file_conv=mingw
 	    ;;
-	  CYGWIN*)
+	  CYGWIN* | MSYS*)
 	    file_conv=cygwin
 	    ;;
 	  *)
@@ -67,7 +67,7 @@ func_file_conv ()
 	mingw/*)
 	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
 	  ;;
-	cygwin/*)
+	cygwin/* | msys/*)
 	  file=`cygpath -m "$file" || echo "$file"`
 	  ;;
 	wine/*)
@@ -255,7 +255,8 @@ EOF
    echo "compile $scriptversion"
    exit $?
    ;;
-  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
+  icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
    func_cl_wrapper "$@"      # Doesn't return...
    ;;
 esac
@@ -339,9 +340,9 @@ exit $ret
 # Local Variables:
 # mode: shell-script
 # sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
 # time-stamp-end: "; # UTC"
 # End:
--- a/config.guess
+++ b/config.guess
--- a/config.h.in
+++ b/config.h.in
@@ -51,10 +51,6 @@
 /* Define to 1 if you have the <unistd.h> header file. */
 #undef HAVE_UNISTD_H

-/* Define to 1 or 0, depending whether the compiler supports simple visibility
-   declarations. */
-#undef HAVE_VISIBILITY
-
 /* Define to 1 if you have the `vsnprintf' function. */
 #undef HAVE_VSNPRINTF

@@ -76,8 +72,7 @@
 /* Check for libsocket */
 #undef LIBSOCKET

-/* Define to the sub-directory in which libtool stores uninstalled libraries.
-   */
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
 #undef LT_OBJDIR

 /* Name of package */
--- a/config.sub
+++ b/config.sub
@@ -1,8 +1,8 @@
 #! /bin/sh
 # Configuration validation subroutine script.
-#   Copyright 1992-2014 Free Software Foundation, Inc.
+#   Copyright 1992-2018 Free Software Foundation, Inc.

-timestamp='2014-09-11'
+timestamp='2018-02-22'

 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -15,7 +15,7 @@ timestamp='2014-09-11'
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
+# along with this program; if not, see <https://www.gnu.org/licenses/>.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -25,7 +25,7 @@ timestamp='2014-09-11'
 # of the GNU General Public License, version 3 ("GPLv3").


-# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+# Please send patches to <config-patches@gnu.org>.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
@@ -33,7 +33,7 @@ timestamp='2014-09-11'
 # Otherwise, we print the canonical config type on stdout and succeed.

 # You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub

 # This file is supposed to be the same for all GNU packages
 # and recognize all the CPU types, system types and aliases
@@ -53,12 +53,11 @@ timestamp='2014-09-11'
 me=`echo "$0" | sed -e 's,.*/,,'`

 usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
-       $0 [OPTION] ALIAS
+Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS

 Canonicalize a configuration name.

-Operation modes:
+Options:
  -h, --help         print this help, then exit
  -t, --time-stamp   print date of last modification, then exit
  -v, --version      print version number, then exit
@@ -68,7 +67,7 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)

-Copyright 1992-2014 Free Software Foundation, Inc.
+Copyright 1992-2018 Free Software Foundation, Inc.

 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -95,7 +94,7 @@ while test $# -gt 0 ; do

    *local*)
       # First pass through any local machine types.
-       echo $1
+       echo "$1"
       exit ;;

    * )
@@ -113,24 +112,24 @@ esac

 # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
 # Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+maybe_os=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
-  knetbsd*-gnu* | netbsd*-gnu* | \
-  kopensolaris*-gnu* | \
+  knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \
+  kopensolaris*-gnu* | cloudabi*-eabi* | \
  storm-chaos* | os2-emx* | rtmk-nova*)
    os=-$maybe_os
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
    ;;
  android-linux)
    os=-linux-android
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+    basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
    ;;
  *)
-    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
-    if [ $basic_machine != $1 ]
-    then os=`echo $1 | sed 's/.*-/-/'`
+    basic_machine=`echo "$1" | sed 's/-[^-]*$//'`
+    if [ "$basic_machine" != "$1" ]
+    then os=`echo "$1" | sed 's/.*-/-/'`
    else os=; fi
    ;;
 esac
@@ -179,44 +178,44 @@ case $os in
 		;;
 	-sco6)
 		os=-sco5v6
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
 		;;
 	-sco5)
 		os=-sco3.2v5
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
 		;;
 	-sco4)
 		os=-sco3.2v4
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
 		;;
 	-sco3.2.[4-9]*)
 		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
 		;;
 	-sco3.2v[4-9]*)
 		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
 		;;
 	-sco5v6*)
 		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
 		;;
 	-sco*)
 		os=-sco3.2v2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
 		;;
 	-udk*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
 		;;
 	-isc)
 		os=-isc2.2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
 		;;
 	-clix*)
 		basic_machine=clipper-intergraph
 		;;
 	-isc*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
 		;;
 	-lynx*178)
 		os=-lynxos178
@@ -228,10 +227,7 @@ case $os in
 		os=-lynxos
 		;;
 	-ptx*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
-		;;
-	-windowsnt*)
-		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-sequent/'`
 		;;
 	-psos*)
 		os=-psos
@@ -255,15 +251,16 @@ case $basic_machine in
 	| arc | arceb \
 	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
 	| avr | avr32 \
+	| ba \
 	| be32 | be64 \
 	| bfin \
 	| c4x | c8051 | clipper \
 	| d10v | d30v | dlx | dsp16xx \
-	| epiphany \
-	| fido | fr30 | frv \
+	| e2k | epiphany \
+	| fido | fr30 | frv | ft32 \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| hexagon \
-	| i370 | i860 | i960 | ia64 \
+	| i370 | i860 | i960 | ia16 | ia64 \
 	| ip2k | iq2000 \
 	| k1om \
 	| le32 | le64 \
@@ -299,13 +296,14 @@ case $basic_machine in
 	| nios | nios2 | nios2eb | nios2el \
 	| ns16k | ns32k \
 	| open8 | or1k | or1knd | or32 \
-	| pdp10 | pdp11 | pj | pjl \
+	| pdp10 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle \
+	| pru \
 	| pyramid \
 	| riscv32 | riscv64 \
 	| rl78 | rx \
 	| score \
-	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
 	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
 	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
@@ -313,7 +311,8 @@ case $basic_machine in
 	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
 	| ubicom32 \
 	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
-	| we32k \
+	| visium \
+	| wasm32 \
 	| x86 | xc16x | xstormy16 | xtensa \
 	| z8k | z80)
 		basic_machine=$basic_machine-unknown
@@ -327,11 +326,14 @@ case $basic_machine in
 	c6x)
 		basic_machine=tic6x-unknown
 		;;
+	leon|leon[3-9])
+		basic_machine=sparc-$basic_machine
+		;;
 	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
 		basic_machine=$basic_machine-unknown
 		os=-none
 		;;
-	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65)
 		;;
 	ms1)
 		basic_machine=mt-unknown
@@ -360,7 +362,7 @@ case $basic_machine in
 	  ;;
 	# Object if more than one company name word.
 	*-*-*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2
 		exit 1
 		;;
 	# Recognize the basic CPU types with company name.
@@ -372,17 +374,18 @@ case $basic_machine in
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
 	| avr-* | avr32-* \
+	| ba-* \
 	| be32-* | be64-* \
 	| bfin-* | bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* \
 	| c8051-* | clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
-	| elxsi-* \
+	| e2k-* | elxsi-* \
 	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| hexagon-* \
-	| i*86-* | i860-* | i960-* | ia64-* \
+	| i*86-* | i860-* | i960-* | ia16-* | ia64-* \
 	| ip2k-* | iq2000-* \
 	| k1om-* \
 	| le32-* | le64-* \
@@ -423,13 +426,15 @@ case $basic_machine in
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+	| pru-* \
 	| pyramid-* \
+	| riscv32-* | riscv64-* \
 	| rl78-* | romp-* | rs6000-* | rx-* \
 	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
 	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \
 	| tahoe-* \
 	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
 	| tile*-* \
@@ -437,6 +442,8 @@ case $basic_machine in
 	| ubicom32-* \
 	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
 	| vax-* \
+	| visium-* \
+	| wasm32-* \
 	| we32k-* \
 	| x86-* | x86_64-* | xc16x-* | xps100-* \
 	| xstormy16-* | xtensa*-* \
@@ -450,7 +457,7 @@ case $basic_machine in
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
 	386bsd)
-		basic_machine=i386-unknown
+		basic_machine=i386-pc
 		os=-bsd
 		;;
 	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
@@ -484,7 +491,7 @@ case $basic_machine in
 		basic_machine=x86_64-pc
 		;;
 	amd64-*)
-		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		basic_machine=x86_64-`echo "$basic_machine" | sed 's/^[^-]*-//'`
 		;;
 	amdahl)
 		basic_machine=580-amdahl
@@ -513,6 +520,9 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-aros
 		;;
+	asmjs)
+		basic_machine=asmjs-unknown
+		;;
 	aux)
 		basic_machine=m68k-apple
 		os=-aux
@@ -526,7 +536,7 @@ case $basic_machine in
 		os=-linux
 		;;
 	blackfin-*)
-		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		basic_machine=bfin-`echo "$basic_machine" | sed 's/^[^-]*-//'`
 		os=-linux
 		;;
 	bluegene*)
@@ -534,13 +544,13 @@ case $basic_machine in
 		os=-cnk
 		;;
 	c54x-*)
-		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		basic_machine=tic54x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
 		;;
 	c55x-*)
-		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		basic_machine=tic55x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
 		;;
 	c6x-*)
-		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		basic_machine=tic6x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
 		;;
 	c90)
 		basic_machine=c90-cray
@@ -629,10 +639,18 @@ case $basic_machine in
 		basic_machine=rs6000-bull
 		os=-bosx
 		;;
-	dpx2* | dpx2*-bull)
+	dpx2*)
 		basic_machine=m68k-bull
 		os=-sysv3
 		;;
+	e500v[12])
+		basic_machine=powerpc-unknown
+		os=$os"spe"
+		;;
+	e500v[12]-*)
+		basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		os=$os"spe"
+		;;
 	ebmon29k)
 		basic_machine=a29k-amd
 		os=-ebmon
@@ -722,9 +740,6 @@ case $basic_machine in
 	hp9k8[0-9][0-9] | hp8[0-9][0-9])
 		basic_machine=hppa1.0-hp
 		;;
-	hppa-next)
-		os=-nextstep3
-		;;
 	hppaosf)
 		basic_machine=hppa1.1-hp
 		os=-osf
@@ -737,26 +752,26 @@ case $basic_machine in
 		basic_machine=i370-ibm
 		;;
 	i*86v32)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
 		os=-sysv32
 		;;
 	i*86v4*)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
 		os=-sysv4
 		;;
 	i*86v)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
 		os=-sysv
 		;;
 	i*86sol2)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
 		os=-solaris2
 		;;
 	i386mach)
 		basic_machine=i386-mach
 		os=-mach
 		;;
-	i386-vsta | vsta)
+	vsta)
 		basic_machine=i386-unknown
 		os=-vsta
 		;;
@@ -774,17 +789,17 @@ case $basic_machine in
 		basic_machine=m68k-isi
 		os=-sysv
 		;;
+	leon-*|leon[3-9]-*)
+		basic_machine=sparc-`echo "$basic_machine" | sed 's/-.*//'`
+		;;
 	m68knommu)
 		basic_machine=m68k-unknown
 		os=-linux
 		;;
 	m68knommu-*)
-		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		basic_machine=m68k-`echo "$basic_machine" | sed 's/^[^-]*-//'`
 		os=-linux
 		;;
-	m88k-omron*)
-		basic_machine=m88k-omron
-		;;
 	magnum | m3230)
 		basic_machine=mips-mips
 		os=-sysv
@@ -816,10 +831,10 @@ case $basic_machine in
 		os=-mint
 		;;
 	mips3*-*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`
 		;;
 	mips3*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`-unknown
 		;;
 	monitor)
 		basic_machine=m68k-rom68k
@@ -838,7 +853,7 @@ case $basic_machine in
 		os=-msdos
 		;;
 	ms1-*)
-		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		basic_machine=`echo "$basic_machine" | sed -e 's/ms1-/mt-/'`
 		;;
 	msys)
 		basic_machine=i686-pc
@@ -880,7 +895,7 @@ case $basic_machine in
 		basic_machine=v70-nec
 		os=-sysv
 		;;
-	next | m*-next )
+	next | m*-next)
 		basic_machine=m68k-next
 		case $os in
 		    -nextstep* )
@@ -925,6 +940,12 @@ case $basic_machine in
 	nsr-tandem)
 		basic_machine=nsr-tandem
 		;;
+	nsv-tandem)
+		basic_machine=nsv-tandem
+		;;
+	nsx-tandem)
+		basic_machine=nsx-tandem
+		;;
 	op50n-* | op60c-*)
 		basic_machine=hppa1.1-oki
 		os=-proelf
@@ -957,7 +978,7 @@ case $basic_machine in
 		os=-linux
 		;;
 	parisc-*)
-		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		basic_machine=hppa-`echo "$basic_machine" | sed 's/^[^-]*-//'`
 		os=-linux
 		;;
 	pbd)
@@ -973,7 +994,7 @@ case $basic_machine in
 		basic_machine=i386-pc
 		;;
 	pc98-*)
-		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		basic_machine=i386-`echo "$basic_machine" | sed 's/^[^-]*-//'`
 		;;
 	pentium | p5 | k5 | k6 | nexgen | viac3)
 		basic_machine=i586-pc
@@ -988,16 +1009,16 @@ case $basic_machine in
 		basic_machine=i786-pc
 		;;
 	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
-		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		basic_machine=i586-`echo "$basic_machine" | sed 's/^[^-]*-//'`
 		;;
 	pentiumpro-* | p6-* | 6x86-* | athlon-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'`
 		;;
 	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'`
 		;;
 	pentium4-*)
-		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+		basic_machine=i786-`echo "$basic_machine" | sed 's/^[^-]*-//'`
 		;;
 	pn)
 		basic_machine=pn-gould
@@ -1007,23 +1028,23 @@ case $basic_machine in
 	ppc | ppcbe)	basic_machine=powerpc-unknown
 		;;
 	ppc-* | ppcbe-*)
-		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'`
 		;;
-	ppcle | powerpclittle | ppc-le | powerpc-little)
+	ppcle | powerpclittle)
 		basic_machine=powerpcle-unknown
 		;;
 	ppcle-* | powerpclittle-*)
-		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		basic_machine=powerpcle-`echo "$basic_machine" | sed 's/^[^-]*-//'`
 		;;
 	ppc64)	basic_machine=powerpc64-unknown
 		;;
-	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+	ppc64-*) basic_machine=powerpc64-`echo "$basic_machine" | sed 's/^[^-]*-//'`
 		;;
-	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+	ppc64le | powerpc64little)
 		basic_machine=powerpc64le-unknown
 		;;
 	ppc64le-* | powerpc64little-*)
-		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+		basic_machine=powerpc64le-`echo "$basic_machine" | sed 's/^[^-]*-//'`
 		;;
 	ps2)
 		basic_machine=i386-ibm
@@ -1077,17 +1098,10 @@ case $basic_machine in
 	sequent)
 		basic_machine=i386-sequent
 		;;
-	sh)
-		basic_machine=sh-hitachi
-		os=-hms
-		;;
 	sh5el)
 		basic_machine=sh5le-unknown
 		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
-	sparclite-wrs | simso-wrs)
+	simso-wrs)
 		basic_machine=sparclite-wrs
 		os=-vxworks
 		;;
@@ -1106,7 +1120,7 @@ case $basic_machine in
 		os=-sysv4
 		;;
 	strongarm-* | thumb-*)
-		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+		basic_machine=arm-`echo "$basic_machine" | sed 's/^[^-]*-//'`
 		;;
 	sun2)
 		basic_machine=m68000-sun
@@ -1228,6 +1242,9 @@ case $basic_machine in
 		basic_machine=hppa1.1-winbond
 		os=-proelf
 		;;
+	x64)
+		basic_machine=x86_64-pc
+		;;
 	xbox)
 		basic_machine=i686-pc
 		os=-mingw32
@@ -1236,20 +1253,12 @@ case $basic_machine in
 		basic_machine=xps100-honeywell
 		;;
 	xscale-* | xscalee[bl]-*)
-		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+		basic_machine=`echo "$basic_machine" | sed 's/^xscale/arm/'`
 		;;
 	ymp)
 		basic_machine=ymp-cray
 		os=-unicos
 		;;
-	z8k-*-coff)
-		basic_machine=z8k-unknown
-		os=-sim
-		;;
-	z80-*-coff)
-		basic_machine=z80-unknown
-		os=-sim
-		;;
 	none)
 		basic_machine=none-none
 		os=-none
@@ -1278,10 +1287,6 @@ case $basic_machine in
 	vax)
 		basic_machine=vax-dec
 		;;
-	pdp10)
-		# there are many clones, so DEC is not a safe bet
-		basic_machine=pdp10-unknown
-		;;
 	pdp11)
 		basic_machine=pdp11-dec
 		;;
@@ -1291,9 +1296,6 @@ case $basic_machine in
 	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
-	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
-		basic_machine=sparc-sun
-		;;
 	cydra)
 		basic_machine=cydra-cydrome
 		;;
@@ -1313,7 +1315,7 @@ case $basic_machine in
 		# Make sure to match an already-canonicalized machine name.
 		;;
 	*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2
 		exit 1
 		;;
 esac
@@ -1321,10 +1323,10 @@ esac
 # Here we canonicalize certain aliases for manufacturers.
 case $basic_machine in
 	*-digital*)
-		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		basic_machine=`echo "$basic_machine" | sed 's/digital.*/dec/'`
 		;;
 	*-commodore*)
-		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		basic_machine=`echo "$basic_machine" | sed 's/commodore.*/cbm/'`
 		;;
 	*)
 		;;
@@ -1335,8 +1337,8 @@ esac
 if [ x"$os" != x"" ]
 then
 case $os in
-	# First match some system type aliases
-	# that might get confused with valid system types.
+	# First match some system type aliases that might get confused
+	# with valid system types.
 	# -solaris* is a basic system type, with this one exception.
 	-auroraux)
 		os=-auroraux
@@ -1347,45 +1349,48 @@ case $os in
 	-solaris)
 		os=-solaris2
 		;;
-	-svr4*)
-		os=-sysv4
-		;;
 	-unixware*)
 		os=-sysv4.2uw
 		;;
 	-gnu/linux*)
 		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
 		;;
-	# First accept the basic system types.
+	# es1800 is here to avoid being matched by es* (a different OS)
+	-es1800*)
+		os=-ose
+		;;
+	# Now accept the basic system types.
 	# The portable systems comes first.
-	# Each alternative MUST END IN A *, to match a version number.
+	# Each alternative MUST end in a * to match a version number.
 	# -sysv* is not here because it comes later, after sysvr4.
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
 	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
 	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
 	      | -sym* | -kopensolaris* | -plan9* \
 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* | -aros* \
+	      | -aos* | -aros* | -cloudabi* | -sortix* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -bitrig* | -openbsd* | -solidbsd* \
+	      | -hiux* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -chorusos* | -chorusrdb* | -cegcc* \
+	      | -chorusos* | -chorusrdb* | -cegcc* | -glidix* \
 	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+	      | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
 	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
 	      | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
-	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
-	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+	      | -morphos* | -superux* | -rtmk* | -windiss* \
 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*)
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \
+	      | -onefs* | -tirtos* | -phoenix* | -fuchsia* | -redox* | -bme* \
+	      | -midnightbsd*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1402,12 +1407,12 @@ case $os in
 	-nto*)
 		os=`echo $os | sed -e 's|nto|nto-qnx|'`
 		;;
-	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+	-sim | -xray | -os68k* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* \
 	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
 		;;
 	-mac*)
-		os=`echo $os | sed -e 's|mac|macos|'`
+		os=`echo "$os" | sed -e 's|mac|macos|'`
 		;;
 	-linux-dietlibc)
 		os=-linux-dietlibc
@@ -1416,10 +1421,10 @@ case $os in
 		os=`echo $os | sed -e 's|linux|linux-gnu|'`
 		;;
 	-sunos5*)
-		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		os=`echo "$os" | sed -e 's|sunos5|solaris2|'`
 		;;
 	-sunos6*)
-		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		os=`echo "$os" | sed -e 's|sunos6|solaris3|'`
 		;;
 	-opened*)
 		os=-openedition
@@ -1430,12 +1435,6 @@ case $os in
 	-wince*)
 		os=-wince
 		;;
-	-osfrose*)
-		os=-osfrose
-		;;
-	-osf*)
-		os=-osf
-		;;
 	-utek*)
 		os=-bsd
 		;;
@@ -1460,7 +1459,7 @@ case $os in
 	-nova*)
 		os=-rtmk-nova
 		;;
-	-ns2 )
+	-ns2)
 		os=-nextstep2
 		;;
 	-nsk*)
@@ -1482,7 +1481,7 @@ case $os in
 	-oss*)
 		os=-sysv3
 		;;
-	-svr4)
+	-svr4*)
 		os=-sysv4
 		;;
 	-svr3)
@@ -1497,32 +1496,38 @@ case $os in
 	-ose*)
 		os=-ose
 		;;
-	-es1800*)
-		os=-ose
-		;;
-	-xenix)
-		os=-xenix
-		;;
 	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
 		os=-mint
 		;;
-	-aros*)
-		os=-aros
-		;;
 	-zvmoe)
 		os=-zvmoe
 		;;
 	-dicos*)
 		os=-dicos
 		;;
+	-pikeos*)
+		# Until real need of OS specific support for
+		# particular features comes up, bare metal
+		# configurations are quite functional.
+		case $basic_machine in
+		    arm*)
+			os=-eabi
+			;;
+		    *)
+			os=-elf
+			;;
+		esac
+		;;
 	-nacl*)
 		;;
+	-ios)
+		;;
 	-none)
 		;;
 	*)
 		# Get rid of the `-' at the beginning of $os.
 		os=`echo $os | sed 's/[^-]*-//'`
-		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2
 		exit 1
 		;;
 esac
@@ -1612,12 +1617,12 @@ case $basic_machine in
 	sparc-* | *-sun)
 		os=-sunos4.1.1
 		;;
+	pru-*)
+		os=-elf
+		;;
 	*-be)
 		os=-beos
 		;;
-	*-haiku)
-		os=-haiku
-		;;
 	*-ibm)
 		os=-aix
 		;;
@@ -1657,7 +1662,7 @@ case $basic_machine in
 	m88k-omron*)
 		os=-luna
 		;;
-	*-next )
+	*-next)
 		os=-nextstep
 		;;
 	*-sequent)
@@ -1672,9 +1677,6 @@ case $basic_machine in
 	i370-*)
 		os=-mvs
 		;;
-	*-next)
-		os=-nextstep3
-		;;
 	*-gould)
 		os=-sysv
 		;;
@@ -1784,15 +1786,15 @@ case $basic_machine in
 				vendor=stratus
 				;;
 		esac
-		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		basic_machine=`echo "$basic_machine" | sed "s/unknown/$vendor/"`
 		;;
 esac

-echo $basic_machine$os
+echo "$basic_machine$os"
 exit

 # Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'write-file-functions 'time-stamp)
 # time-stamp-start: "timestamp='"
 # time-stamp-format: "%:y-%02m-%02d"
 # time-stamp-end: "'"
--- a/2462
+++ b/2462
--- a/10
+++ b/10
@@ -1,9 +1,9 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects

-scriptversion=2013-05-30.07; # UTC
+scriptversion=2018-03-07.03; # UTC

-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2020 Free Software Foundation, Inc.

 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -16,7 +16,7 @@ scriptversion=2013-05-30.07; # UTC
 # GNU General Public License for more details.

 # You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.

 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -783,9 +783,9 @@ exit 0
 # Local Variables:
 # mode: shell-script
 # sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
 # time-stamp-end: "; # UTC"
 # End:
--- a/html/Makefile.in
+++ b/html/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.16.3 from Makefile.am.
 # @configure_input@

-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2020 Free Software Foundation, Inc.

 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -15,7 +15,17 @@
@SET_MAKE@

 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
@@ -79,7 +89,6 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = html
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
@@ -88,6 +97,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
@@ -151,6 +161,7 @@ DATA = $(HelpHtml_DATA) $(HelpHtmlTxt_DATA) $(HelpHtmldiv_DATA) \
 	$(WebHtmlimages_DATA) $(WebIcon16x16_DATA) \
 	$(WebIcon32x32_DATA) $(WebIcon48x48_DATA) $(WebPixmap_DATA)
 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -164,7 +175,6 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
 CYGPATH_W = @CYGPATH_W@
@@ -183,7 +193,6 @@ EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
 HTTPS_SUPPORT = @HTTPS_SUPPORT@
 ICONV_LIBS = @ICONV_LIBS@
 INSTALL = @INSTALL@
@@ -201,6 +210,7 @@ LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_CV_OBJDIR = @LT_CV_OBJDIR@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -277,6 +287,7 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
+runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
@@ -335,14 +346,13 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu html/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu html/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
 	esac;

 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -639,7 +649,10 @@ ctags CTAGS:
 cscope cscopelist:


-distdir: $(DISTFILES)
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -812,6 +825,8 @@ uninstall-am: uninstall-HelpHtmlDATA uninstall-HelpHtmlTxtDATA \
 	uninstall-WebIcon32x32DATA uninstall-WebIcon48x48DATA \
 	uninstall-WebPixmapDATA uninstall-am

+.PRECIOUS: Makefile
+

 install-data-hook:
 	if test ! -L $(DESTDIR)$(prefix)/share/httrack/html ; then \
--- a/421
+++ b/421
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile

-scriptversion=2011-11-20.07; # UTC
+scriptversion=2020-11-14.01; # UTC

 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -41,19 +41,15 @@ scriptversion=2011-11-20.07; # UTC
 # This script is compatible with the BSD install script, but was written
 # from scratch.

+tab='	'
 nl='
 '
-IFS=" ""	$nl"
+IFS=" $tab$nl"

-# set DOITPROG to echo to test this script
+# Set DOITPROG to "echo" to test this script.

-# Don't use :- since 4.3BSD and earlier shells don't like it.
 doit=${DOITPROG-}
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
+doit_exec=${doit:-exec}

 # Put in absolute file names if you don't have them in your path;
 # or use environment vars.
@@ -68,22 +64,16 @@ mvprog=${MVPROG-mv}
 rmprog=${RMPROG-rm}
 stripprog=${STRIPPROG-strip}

-posix_glob='?'
-initialize_posix_glob='
-  test "$posix_glob" != "?" || {
-    if (set -f) 2>/dev/null; then
-      posix_glob=
-    else
-      posix_glob=:
-    fi
-  }
-'
-
 posix_mkdir=

 # Desired mode of installed file.
 mode=0755

+# Create dirs (including intermediate dirs) using mode 755.
+# This is like GNU 'install' as of coreutils 8.32 (2020).
+mkdir_umask=22
+
+backupsuffix=
 chgrpcmd=
 chmodcmd=$chmodprog
 chowncmd=
@@ -97,7 +87,7 @@ dir_arg=
 dst_arg=

 copy_on_change=false
-no_target_directory=
+is_target_a_directory=possibly

 usage="\
 Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
@@ -114,18 +104,28 @@ Options:
     --version  display version info and exit.

  -c            (ignored)
-  -C            install only if different (preserve the last data modification time)
+  -C            install only if different (preserve data modification time)
  -d            create directories instead of installing files.
  -g GROUP      $chgrpprog installed files to GROUP.
  -m MODE       $chmodprog installed files to MODE.
  -o USER       $chownprog installed files to USER.
+  -p            pass -p to $cpprog.
  -s            $stripprog installed files.
+  -S SUFFIX     attempt to back up existing files, with suffix SUFFIX.
  -t DIRECTORY  install into DIRECTORY.
  -T            report an error if DSTFILE is a directory.

 Environment variables override the default commands:
  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
  RMPROG STRIPPROG
+
+By default, rm is invoked with -f; when overridden with RMPROG,
+it's up to you to specify -f if you want it.
+
+If -S is not specified, no backups are attempted.
+
+Email bug reports to bug-automake@gnu.org.
+Automake home page: https://www.gnu.org/software/automake/
 "

 while test $# -ne 0; do
@@ -137,46 +137,62 @@ while test $# -ne 0; do
    -d) dir_arg=true;;

    -g) chgrpcmd="$chgrpprog $2"
-	shift;;
+        shift;;

    --help) echo "$usage"; exit $?;;

    -m) mode=$2
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *'['*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-	shift;;
+        case $mode in
+          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+            echo "$0: invalid mode: $mode" >&2
+            exit 1;;
+        esac
+        shift;;

    -o) chowncmd="$chownprog $2"
-	shift;;
+        shift;;
+
+    -p) cpprog="$cpprog -p";;

    -s) stripcmd=$stripprog;;

-    -t) dst_arg=$2
-	# Protect names problematic for 'test' and other utilities.
-	case $dst_arg in
-	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
-	esac
-	shift;;
+    -S) backupsuffix="$2"
+        shift;;

-    -T) no_target_directory=true;;
+    -t)
+        is_target_a_directory=always
+        dst_arg=$2
+        # Protect names problematic for 'test' and other utilities.
+        case $dst_arg in
+          -* | [=\(\)!]) dst_arg=./$dst_arg;;
+        esac
+        shift;;
+
+    -T) is_target_a_directory=never;;

    --version) echo "$0 $scriptversion"; exit $?;;

-    --)	shift
-	break;;
+    --) shift
+        break;;

-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
+    -*) echo "$0: invalid option: $1" >&2
+        exit 1;;

    *)  break;;
  esac
  shift
 done

+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+  if test -n "$dst_arg"; then
+    echo "$0: target directory not allowed when installing a directory." >&2
+    exit 1
+  fi
+fi
+
 if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
  # When -d is used, all remaining arguments are directories to create.
  # When -t is used, the destination is already specified.
@@ -207,6 +223,15 @@ if test $# -eq 0; then
  exit 0
 fi

+if test -z "$dir_arg"; then
+  if test $# -gt 1 || test "$is_target_a_directory" = always; then
+    if test ! -d "$dst_arg"; then
+      echo "$0: $dst_arg: Is not a directory." >&2
+      exit 1
+    fi
+  fi
+fi
+
 if test -z "$dir_arg"; then
  do_exit='(exit $ret); exit $ret'
  trap "ret=129; $do_exit" 1
@@ -223,16 +248,16 @@ if test -z "$dir_arg"; then

    *[0-7])
      if test -z "$stripcmd"; then
-	u_plus_rw=
+        u_plus_rw=
      else
-	u_plus_rw='% 200'
+        u_plus_rw='% 200'
      fi
      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
    *)
      if test -z "$stripcmd"; then
-	u_plus_rw=
+        u_plus_rw=
      else
-	u_plus_rw=,u+rw
+        u_plus_rw=,u+rw
      fi
      cp_umask=$mode$u_plus_rw;;
  esac
@@ -250,6 +275,10 @@ do
    dstdir=$dst
    test -d "$dstdir"
    dstdir_status=$?
+    # Don't chown directories that already exist.
+    if test $dstdir_status = 0; then
+      chowncmd=""
+    fi
  else

    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
@@ -266,185 +295,148 @@ do
    fi
    dst=$dst_arg

-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
+    # If destination is a directory, append the input filename.
    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dst_arg: Is a directory" >&2
-	exit 1
+      if test "$is_target_a_directory" = never; then
+        echo "$0: $dst_arg: Is a directory" >&2
+        exit 1
      fi
      dstdir=$dst
-      dst=$dstdir/`basename "$src"`
+      dstbase=`basename "$src"`
+      case $dst in
+	*/) dst=$dst$dstbase;;
+	*)  dst=$dst/$dstbase;;
+      esac
      dstdir_status=0
    else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)[^/].*/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\).*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
+      dstdir=`dirname "$dst"`
      test -d "$dstdir"
      dstdir_status=$?
    fi
  fi

+  case $dstdir in
+    */) dstdirslash=$dstdir;;
+    *)  dstdirslash=$dstdir/;;
+  esac
+
  obsolete_mkdir_used=false

  if test $dstdir_status != 0; then
    case $posix_mkdir in
      '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *[2367][2367]) mkdir_umask=$umask;;
-	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+        # With -d, create the new directory with the user-specified mode.
+        # Otherwise, rely on $mkdir_umask.
+        if test -n "$dir_arg"; then
+          mkdir_mode=-m$mode
+        else
+          mkdir_mode=
+        fi

-	  *[0-7])
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
+        posix_mkdir=false
+	# The $RANDOM variable is not portable (e.g., dash).  Use it
+	# here however when possible just to lower collision chance.
+	tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$

-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
+	trap '
+	  ret=$?
+	  rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
+	  exit $ret
+	' 0
+
+	# Because "mkdir -p" follows existing symlinks and we likely work
+	# directly in world-writeable /tmp, make sure that the '$tmpdir'
+	# directory is successfully created first before we actually test
+	# 'mkdir -p'.
+	if (umask $mkdir_umask &&
+	    $mkdirprog $mkdir_mode "$tmpdir" &&
+	    exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+	then
+	  if test -z "$dir_arg" || {
+	       # Check for POSIX incompatibilities with -m.
+	       # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+	       # other-writable bit of parent directory when it shouldn't.
+	       # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+	       test_tmpdir="$tmpdir/a"
+	       ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+	       case $ls_ld_tmpdir in
+		 d????-?r-*) different_mode=700;;
+		 d????-?--*) different_mode=755;;
+		 *) false;;
+	       esac &&
+	       $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+		 ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+		 test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+	       }
+	     }
+	  then posix_mkdir=:
+	  fi
+	  rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
 	else
-	  mkdir_mode=
+	  # Remove any dirs left behind by ancient mkdir implementations.
+	  rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
 	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *[123567][0-7][0-7])
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-            # $RANDOM is not portable (e.g. dash);  use it when possible to
-            # lower collision chance
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	     # As "mkdir -p" follows symlinks and we work in /tmp possibly;  so
-	     # create the $tmpdir first (and fail if unsuccessful) to make sure
-	     # that nobody tries to guess the $tmpdir name.
-	    if (umask $mkdir_umask &&
-		$mkdirprog $mkdir_mode "$tmpdir" &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   test_tmpdir="$tmpdir/a"
-		   ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
+	trap '' 0;;
    esac

    if
      $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+        umask $mkdir_umask &&
+        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
      )
    then :
    else

-      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # mkdir does not conform to POSIX,
      # or it failed possibly due to a race condition.  Create the
      # directory the slow way, step by step, checking for races as we go.

      case $dstdir in
-	/*) prefix='/';;
-	[-=\(\)!]*) prefix='./';;
-	*)  prefix='';;
+        /*) prefix='/';;
+        [-=\(\)!]*) prefix='./';;
+        *)  prefix='';;
      esac

-      eval "$initialize_posix_glob"
-
      oIFS=$IFS
      IFS=/
-      $posix_glob set -f
+      set -f
      set fnord $dstdir
      shift
-      $posix_glob set +f
+      set +f
      IFS=$oIFS

      prefixes=

      for d
      do
-	test X"$d" = X && continue
+        test X"$d" = X && continue

-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
+        prefix=$prefix$d
+        if test -d "$prefix"; then
+          prefixes=
+        else
+          if $posix_mkdir; then
+            (umask $mkdir_umask &&
+             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+            # Don't fail if two instances are running concurrently.
+            test -d "$prefix" || exit 1
+          else
+            case $prefix in
+              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+              *) qprefix=$prefix;;
+            esac
+            prefixes="$prefixes '$qprefix'"
+          fi
+        fi
+        prefix=$prefix/
      done

      if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
+        # Don't fail if two instances are running concurrently.
+        (umask $mkdir_umask &&
+         eval "\$doit_exec \$mkdirprog $prefixes") ||
+          test -d "$dstdir" || exit 1
+        obsolete_mkdir_used=true
      fi
    fi
  fi
@@ -457,14 +449,25 @@ do
  else

    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
+    dsttmp=${dstdirslash}_inst.$$_
+    rmtmp=${dstdirslash}_rm.$$_

    # Trap to clean up those temp files at exit.
    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0

    # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+    (umask $cp_umask &&
+     { test -z "$stripcmd" || {
+	 # Create $dsttmp read-write so that cp doesn't create it read-only,
+	 # which would cause strip to fail.
+	 if test -z "$doit"; then
+	   : >"$dsttmp" # No need to fork-exec 'touch'.
+	 else
+	   $doit touch "$dsttmp"
+	 fi
+       }
+     } &&
+     $doit_exec $cpprog "$src" "$dsttmp") &&

    # and set any options; do chmod last to preserve setuid bits.
    #
@@ -479,20 +482,24 @@ do

    # If -C, don't bother to copy if it wouldn't change the file.
    if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
-
-       eval "$initialize_posix_glob" &&
-       $posix_glob set -f &&
+       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
+       set -f &&
       set X $old && old=:$2:$4:$5:$6 &&
       set X $new && new=:$2:$4:$5:$6 &&
-       $posix_glob set +f &&
-
+       set +f &&
       test "$old" = "$new" &&
       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
    then
      rm -f "$dsttmp"
    else
+      # If $backupsuffix is set, and the file being installed
+      # already exists, attempt a backup.  Don't worry if it fails,
+      # e.g., if mv doesn't support -f.
+      if test -n "$backupsuffix" && test -f "$dst"; then
+        $doit $mvcmd -f "$dst" "$dst$backupsuffix" 2>/dev/null
+      fi
+
      # Rename the file to the real destination.
      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||

@@ -500,24 +507,24 @@ do
      # to itself, or perhaps because mv is so ancient that it does not
      # support -f.
      {
-	# Now remove or move aside any old file at destination location.
-	# We try this two ways since rm can't unlink itself on some
-	# systems and the destination file might be busy for other
-	# reasons.  In this case, the final cleanup might fail but the new
-	# file should still install successfully.
-	{
-	  test ! -f "$dst" ||
-	  $doit $rmcmd -f "$dst" 2>/dev/null ||
-	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-	  } ||
-	  { echo "$0: cannot unlink or rename $dst" >&2
-	    (exit 1); exit 1
-	  }
-	} &&
+        # Now remove or move aside any old file at destination location.
+        # We try this two ways since rm can't unlink itself on some
+        # systems and the destination file might be busy for other
+        # reasons.  In this case, the final cleanup might fail but the new
+        # file should still install successfully.
+        {
+          test ! -f "$dst" ||
+          $doit $rmcmd "$dst" 2>/dev/null ||
+          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+            { $doit $rmcmd "$rmtmp" 2>/dev/null; :; }
+          } ||
+          { echo "$0: cannot unlink or rename $dst" >&2
+            (exit 1); exit 1
+          }
+        } &&

-	# Now rename the file to the real destination.
-	$doit $mvcmd "$dsttmp" "$dst"
+        # Now rename the file to the real destination.
+        $doit $mvcmd "$dsttmp" "$dst"
      }
    fi || exit 1

@@ -526,9 +533,9 @@ do
 done

 # Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
 # time-stamp-end: "; # UTC"
 # End:
--- a/lang/Makefile.in
+++ b/lang/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.16.3 from Makefile.am.
 # @configure_input@

-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2020 Free Software Foundation, Inc.

 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -15,7 +15,17 @@
@SET_MAKE@

 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
@@ -79,7 +89,6 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = lang
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
@@ -88,6 +97,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
@@ -141,6 +151,7 @@ am__uninstall_files_from_dir = { \
 am__installdirs = "$(DESTDIR)$(langdir)" "$(DESTDIR)$(langrootdir)"
 DATA = $(lang_DATA) $(langroot_DATA)
 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -154,7 +165,6 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
 CYGPATH_W = @CYGPATH_W@
@@ -173,7 +183,6 @@ EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
 HTTPS_SUPPORT = @HTTPS_SUPPORT@
 ICONV_LIBS = @ICONV_LIBS@
 INSTALL = @INSTALL@
@@ -191,6 +200,7 @@ LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_CV_OBJDIR = @LT_CV_OBJDIR@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -267,6 +277,7 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
+runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
@@ -295,14 +306,13 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lang/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu lang/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
 	esac;

 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -368,7 +378,10 @@ ctags CTAGS:
 cscope cscopelist:


-distdir: $(DISTFILES)
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -516,6 +529,8 @@ uninstall-am: uninstall-langDATA uninstall-langrootDATA
 	mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
 	uninstall-am uninstall-langDATA uninstall-langrootDATA

+.PRECIOUS: Makefile
+

 #dist-hook:

--- a/libtest/Makefile.in
+++ b/libtest/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.16.3 from Makefile.am.
 # @configure_input@

-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2020 Free Software Foundation, Inc.

 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -16,7 +16,17 @@


 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
@@ -80,8 +90,6 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = libtest
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(top_srcdir)/depcomp
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
@@ -90,6 +98,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
@@ -220,7 +229,17 @@ am__v_at_0 = @
 am__v_at_1 = 
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
 depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/callbacks-example-baselinks.Plo \
+	./$(DEPDIR)/callbacks-example-changecontent.Plo \
+	./$(DEPDIR)/callbacks-example-contentfilter.Plo \
+	./$(DEPDIR)/callbacks-example-displayheader.Plo \
+	./$(DEPDIR)/callbacks-example-filename.Plo \
+	./$(DEPDIR)/callbacks-example-filename2.Plo \
+	./$(DEPDIR)/callbacks-example-filenameiisbug.Plo \
+	./$(DEPDIR)/callbacks-example-listlinks.Plo \
+	./$(DEPDIR)/callbacks-example-log.Plo \
+	./$(DEPDIR)/callbacks-example-simple.Plo
 am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
@@ -276,6 +295,7 @@ am__define_uniq_tagged_files = \
  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -289,7 +309,6 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
 CYGPATH_W = @CYGPATH_W@
@@ -308,7 +327,6 @@ EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
 HTTPS_SUPPORT = @HTTPS_SUPPORT@
 ICONV_LIBS = @ICONV_LIBS@
 INSTALL = @INSTALL@
@@ -326,6 +344,7 @@ LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_CV_OBJDIR = @LT_CV_OBJDIR@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -402,6 +421,7 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
+runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
@@ -466,14 +486,13 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu libtest/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu libtest/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
 	esac;

 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -556,16 +575,22 @@ mostlyclean-compile:
 distclean-compile:
 	-rm -f *.tab.c

-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-baselinks.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-changecontent.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-contentfilter.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-displayheader.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-filename.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-filename2.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-filenameiisbug.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-listlinks.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-log.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-simple.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-baselinks.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-changecontent.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-contentfilter.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-displayheader.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-filename.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-filename2.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-filenameiisbug.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-listlinks.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-log.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-simple.Plo@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)

 .c.o:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@@ -670,7 +695,10 @@ cscopelist-am: $(am__tagged_files)
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

-distdir: $(DISTFILES)
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -743,7 +771,16 @@ clean-am: clean-generic clean-libtool clean-pkglibLTLIBRARIES \
 	mostlyclean-am

 distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
+		-rm -f ./$(DEPDIR)/callbacks-example-baselinks.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-changecontent.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-contentfilter.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-displayheader.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-filename.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-filename2.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-filenameiisbug.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-listlinks.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-log.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-simple.Plo
 	-rm -f Makefile
 distclean-am: clean-am distclean-compile distclean-generic \
 	distclean-tags
@@ -789,7 +826,16 @@ install-ps-am:
 installcheck-am:

 maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
+		-rm -f ./$(DEPDIR)/callbacks-example-baselinks.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-changecontent.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-contentfilter.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-displayheader.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-filename.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-filename2.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-filenameiisbug.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-listlinks.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-log.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-simple.Plo
 	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic

@@ -810,13 +856,13 @@ uninstall-am: uninstall-exemplesDATA uninstall-pkglibLTLIBRARIES

 .MAKE: install-am install-strip

-.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
-	clean-libtool clean-pkglibLTLIBRARIES cscopelist-am ctags \
-	ctags-am distclean distclean-compile distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-exemplesDATA install-html \
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
+	clean-generic clean-libtool clean-pkglibLTLIBRARIES \
+	cscopelist-am ctags ctags-am distclean distclean-compile \
+	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-exemplesDATA install-html \
 	install-html-am install-info install-info-am install-man \
 	install-pdf install-pdf-am install-pkglibLTLIBRARIES \
 	install-ps install-ps-am install-strip installcheck \
@@ -826,6 +872,8 @@ uninstall-am: uninstall-exemplesDATA uninstall-pkglibLTLIBRARIES
 	tags tags-am uninstall uninstall-am uninstall-exemplesDATA \
 	uninstall-pkglibLTLIBRARIES

+.PRECIOUS: Makefile
+

 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
--- a/ltmain.sh
+++ b/ltmain.sh
--- a/m4/Makefile.in
+++ b/m4/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.16.3 from Makefile.am.
 # @configure_input@

-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2020 Free Software Foundation, Inc.

 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -14,7 +14,17 @@

@SET_MAKE@
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
@@ -78,7 +88,6 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = m4
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
@@ -87,6 +96,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
@@ -111,6 +121,7 @@ am__can_run_installinfo = \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -124,7 +135,6 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
 CYGPATH_W = @CYGPATH_W@
@@ -143,7 +153,6 @@ EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
 HTTPS_SUPPORT = @HTTPS_SUPPORT@
 ICONV_LIBS = @ICONV_LIBS@
 INSTALL = @INSTALL@
@@ -161,6 +170,7 @@ LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_CV_OBJDIR = @LT_CV_OBJDIR@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -237,6 +247,7 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
+runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
@@ -261,14 +272,13 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu m4/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu m4/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
 	esac;

 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -292,7 +302,10 @@ ctags CTAGS:
 cscope cscopelist:


-distdir: $(DISTFILES)
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -436,6 +449,8 @@ uninstall-am:
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags-am uninstall uninstall-am

+.PRECIOUS: Makefile
+

 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
--- a/man/Makefile.in
+++ b/man/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.16.3 from Makefile.am.
 # @configure_input@

-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2020 Free Software Foundation, Inc.

 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -14,7 +14,17 @@

@SET_MAKE@
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
@@ -78,7 +88,6 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = man
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
@@ -87,6 +96,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
@@ -142,6 +152,7 @@ am__installdirs = "$(DESTDIR)$(man1dir)"
 NROFF = nroff
 MANS = $(man_MANS)
 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -155,7 +166,6 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
 CYGPATH_W = @CYGPATH_W@
@@ -174,7 +184,6 @@ EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
 HTTPS_SUPPORT = @HTTPS_SUPPORT@
 ICONV_LIBS = @ICONV_LIBS@
 INSTALL = @INSTALL@
@@ -192,6 +201,7 @@ LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_CV_OBJDIR = @LT_CV_OBJDIR@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -268,6 +278,7 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
+runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
@@ -295,14 +306,13 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu man/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
 	esac;

 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -369,7 +379,10 @@ ctags CTAGS:
 cscope cscopelist:


-distdir: $(DISTFILES)
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -519,6 +532,8 @@ uninstall-man: uninstall-man1
 	ps ps-am tags-am uninstall uninstall-am uninstall-man \
 	uninstall-man1

+.PRECIOUS: Makefile
+

 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.16.3 from Makefile.am.
 # @configure_input@

-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2020 Free Software Foundation, Inc.

 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -18,7 +18,17 @@


 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
@@ -83,8 +93,6 @@ build_triplet = @build@
 host_triplet = @host@
 bin_PROGRAMS = proxytrack$(EXEEXT) httrack$(EXEEXT) htsserver$(EXEEXT)
 subdir = src
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(top_srcdir)/depcomp
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
@@ -93,10 +101,14 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(libdir)" \
+	"$(DESTDIR)$(whttrackrundir)" "$(DESTDIR)$(DevIncludesdir)"
+PROGRAMS = $(bin_PROGRAMS)
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
@@ -124,8 +136,6 @@ am__uninstall_files_from_dir = { \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
-am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
-	"$(DESTDIR)$(whttrackrundir)" "$(DESTDIR)$(DevIncludesdir)"
 LTLIBRARIES = $(lib_LTLIBRARIES)
 am__DEPENDENCIES_1 =
 libhtsjava_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
@@ -165,7 +175,6 @@ libhttrack_la_OBJECTS = $(am_libhttrack_la_OBJECTS)
 libhttrack_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(libhttrack_la_CFLAGS) \
 	$(CFLAGS) $(libhttrack_la_LDFLAGS) $(LDFLAGS) -o $@
-PROGRAMS = $(bin_PROGRAMS)
 am_htsserver_OBJECTS = htsserver-htsserver.$(OBJEXT) \
 	htsserver-htsweb.$(OBJEXT)
 htsserver_OBJECTS = $(am_htsserver_OBJECTS)
@@ -205,7 +214,52 @@ am__v_at_0 = @
 am__v_at_1 = 
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
 depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/htsjava.Plo \
+	./$(DEPDIR)/htsserver-htsserver.Po \
+	./$(DEPDIR)/htsserver-htsweb.Po ./$(DEPDIR)/httrack.Po \
+	./$(DEPDIR)/libhttrack_la-htsalias.Plo \
+	./$(DEPDIR)/libhttrack_la-htsback.Plo \
+	./$(DEPDIR)/libhttrack_la-htsbauth.Plo \
+	./$(DEPDIR)/libhttrack_la-htscache.Plo \
+	./$(DEPDIR)/libhttrack_la-htscatchurl.Plo \
+	./$(DEPDIR)/libhttrack_la-htscharset.Plo \
+	./$(DEPDIR)/libhttrack_la-htsconcat.Plo \
+	./$(DEPDIR)/libhttrack_la-htscore.Plo \
+	./$(DEPDIR)/libhttrack_la-htscoremain.Plo \
+	./$(DEPDIR)/libhttrack_la-htsencoding.Plo \
+	./$(DEPDIR)/libhttrack_la-htsfilters.Plo \
+	./$(DEPDIR)/libhttrack_la-htsftp.Plo \
+	./$(DEPDIR)/libhttrack_la-htshash.Plo \
+	./$(DEPDIR)/libhttrack_la-htshelp.Plo \
+	./$(DEPDIR)/libhttrack_la-htsindex.Plo \
+	./$(DEPDIR)/libhttrack_la-htslib.Plo \
+	./$(DEPDIR)/libhttrack_la-htsmd5.Plo \
+	./$(DEPDIR)/libhttrack_la-htsmodules.Plo \
+	./$(DEPDIR)/libhttrack_la-htsname.Plo \
+	./$(DEPDIR)/libhttrack_la-htsparse.Plo \
+	./$(DEPDIR)/libhttrack_la-htsrobots.Plo \
+	./$(DEPDIR)/libhttrack_la-htsthread.Plo \
+	./$(DEPDIR)/libhttrack_la-htstools.Plo \
+	./$(DEPDIR)/libhttrack_la-htswizard.Plo \
+	./$(DEPDIR)/libhttrack_la-htswrap.Plo \
+	./$(DEPDIR)/libhttrack_la-htszlib.Plo \
+	./$(DEPDIR)/libhttrack_la-md5.Plo \
+	./$(DEPDIR)/libhttrack_la-punycode.Plo \
+	./$(DEPDIR)/proxytrack-htsmd5.Po ./$(DEPDIR)/proxytrack-md5.Po \
+	coucal/$(DEPDIR)/libhttrack_la-coucal.Plo \
+	coucal/$(DEPDIR)/proxytrack-coucal.Po \
+	minizip/$(DEPDIR)/libhttrack_la-ioapi.Plo \
+	minizip/$(DEPDIR)/libhttrack_la-mztools.Plo \
+	minizip/$(DEPDIR)/libhttrack_la-unzip.Plo \
+	minizip/$(DEPDIR)/libhttrack_la-zip.Plo \
+	minizip/$(DEPDIR)/proxytrack-ioapi.Po \
+	minizip/$(DEPDIR)/proxytrack-mztools.Po \
+	minizip/$(DEPDIR)/proxytrack-unzip.Po \
+	minizip/$(DEPDIR)/proxytrack-zip.Po \
+	proxy/$(DEPDIR)/proxytrack-main.Po \
+	proxy/$(DEPDIR)/proxytrack-proxytrack.Po \
+	proxy/$(DEPDIR)/proxytrack-store.Po
 am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
@@ -254,6 +308,7 @@ am__define_uniq_tagged_files = \
  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -267,7 +322,6 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
 CYGPATH_W = @CYGPATH_W@
@@ -286,7 +340,6 @@ EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
 HTTPS_SUPPORT = @HTTPS_SUPPORT@
 ICONV_LIBS = @ICONV_LIBS@
 INSTALL = @INSTALL@
@@ -304,6 +357,7 @@ LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_CV_OBJDIR = @LT_CV_OBJDIR@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -380,6 +434,7 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
+runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
@@ -503,14 +558,13 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu src/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
 	esac;

 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -521,6 +575,55 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list

 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
@@ -584,55 +687,6 @@ minizip/libhttrack_la-zip.lo: minizip/$(am__dirstamp) \

 libhttrack.la: $(libhttrack_la_OBJECTS) $(libhttrack_la_DEPENDENCIES) $(EXTRA_libhttrack_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(libhttrack_la_LINK) -rpath $(libdir) $(libhttrack_la_OBJECTS) $(libhttrack_la_LIBADD) $(LIBS)
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
-	fi; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p \
-	 || test -f $$p1 \
-	  ; then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' \
-	    -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
-	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
-	    } \
-	; done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' \
-	`; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list

 htsserver$(EXEEXT): $(htsserver_OBJECTS) $(htsserver_DEPENDENCIES) $(EXTRA_htsserver_DEPENDENCIES) 
 	@rm -f htsserver$(EXEEXT)
@@ -714,53 +768,59 @@ mostlyclean-compile:
 distclean-compile:
 	-rm -f *.tab.c

-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/htsjava.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/htsserver-htsserver.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/htsserver-htsweb.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/httrack.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsalias.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsback.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsbauth.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htscache.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htscatchurl.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htscharset.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsconcat.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htscore.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htscoremain.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsencoding.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsfilters.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsftp.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htshash.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htshelp.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsindex.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htslib.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsmd5.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsmodules.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsname.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsparse.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsrobots.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsthread.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htstools.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htswizard.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htswrap.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htszlib.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-md5.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-punycode.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/proxytrack-htsmd5.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/proxytrack-md5.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@coucal/$(DEPDIR)/libhttrack_la-coucal.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@coucal/$(DEPDIR)/proxytrack-coucal.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@minizip/$(DEPDIR)/libhttrack_la-ioapi.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@minizip/$(DEPDIR)/libhttrack_la-mztools.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@minizip/$(DEPDIR)/libhttrack_la-unzip.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@minizip/$(DEPDIR)/libhttrack_la-zip.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@minizip/$(DEPDIR)/proxytrack-ioapi.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@minizip/$(DEPDIR)/proxytrack-mztools.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@minizip/$(DEPDIR)/proxytrack-unzip.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@minizip/$(DEPDIR)/proxytrack-zip.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@proxy/$(DEPDIR)/proxytrack-main.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@proxy/$(DEPDIR)/proxytrack-proxytrack.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@proxy/$(DEPDIR)/proxytrack-store.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/htsjava.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/htsserver-htsserver.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/htsserver-htsweb.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/httrack.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsalias.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsback.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsbauth.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htscache.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htscatchurl.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htscharset.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsconcat.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htscore.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htscoremain.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsencoding.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsfilters.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsftp.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htshash.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htshelp.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsindex.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htslib.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsmd5.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsmodules.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsname.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsparse.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsrobots.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htsthread.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htstools.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htswizard.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htswrap.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-htszlib.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-md5.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libhttrack_la-punycode.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/proxytrack-htsmd5.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/proxytrack-md5.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@coucal/$(DEPDIR)/libhttrack_la-coucal.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@coucal/$(DEPDIR)/proxytrack-coucal.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@minizip/$(DEPDIR)/libhttrack_la-ioapi.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@minizip/$(DEPDIR)/libhttrack_la-mztools.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@minizip/$(DEPDIR)/libhttrack_la-unzip.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@minizip/$(DEPDIR)/libhttrack_la-zip.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@minizip/$(DEPDIR)/proxytrack-ioapi.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@minizip/$(DEPDIR)/proxytrack-mztools.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@minizip/$(DEPDIR)/proxytrack-unzip.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@minizip/$(DEPDIR)/proxytrack-zip.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@proxy/$(DEPDIR)/proxytrack-main.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@proxy/$(DEPDIR)/proxytrack-proxytrack.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@proxy/$(DEPDIR)/proxytrack-store.Po@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)

 .c.o:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@@ -1266,7 +1326,10 @@ cscopelist-am: $(am__tagged_files)
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

-distdir: $(DISTFILES)
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -1298,11 +1361,11 @@ distdir: $(DISTFILES)
 	done
 check-am: all-am
 check: check-am
-all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(DATA)
+all-am: Makefile $(PROGRAMS) $(LTLIBRARIES) $(SCRIPTS) $(DATA)
 install-binPROGRAMS: install-libLTLIBRARIES

 installdirs:
-	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(whttrackrundir)" "$(DESTDIR)$(DevIncludesdir)"; do \
+	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(libdir)" "$(DESTDIR)$(whttrackrundir)" "$(DESTDIR)$(DevIncludesdir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
@@ -1347,7 +1410,53 @@ clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
 	clean-libtool mostlyclean-am

 distclean: distclean-am
-	-rm -rf ./$(DEPDIR) coucal/$(DEPDIR) minizip/$(DEPDIR) proxy/$(DEPDIR)
+		-rm -f ./$(DEPDIR)/htsjava.Plo
+	-rm -f ./$(DEPDIR)/htsserver-htsserver.Po
+	-rm -f ./$(DEPDIR)/htsserver-htsweb.Po
+	-rm -f ./$(DEPDIR)/httrack.Po
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsalias.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsback.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsbauth.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htscache.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htscatchurl.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htscharset.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsconcat.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htscore.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htscoremain.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsencoding.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsfilters.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsftp.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htshash.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htshelp.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsindex.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htslib.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsmd5.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsmodules.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsname.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsparse.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsrobots.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsthread.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htstools.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htswizard.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htswrap.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htszlib.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-md5.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-punycode.Plo
+	-rm -f ./$(DEPDIR)/proxytrack-htsmd5.Po
+	-rm -f ./$(DEPDIR)/proxytrack-md5.Po
+	-rm -f coucal/$(DEPDIR)/libhttrack_la-coucal.Plo
+	-rm -f coucal/$(DEPDIR)/proxytrack-coucal.Po
+	-rm -f minizip/$(DEPDIR)/libhttrack_la-ioapi.Plo
+	-rm -f minizip/$(DEPDIR)/libhttrack_la-mztools.Plo
+	-rm -f minizip/$(DEPDIR)/libhttrack_la-unzip.Plo
+	-rm -f minizip/$(DEPDIR)/libhttrack_la-zip.Plo
+	-rm -f minizip/$(DEPDIR)/proxytrack-ioapi.Po
+	-rm -f minizip/$(DEPDIR)/proxytrack-mztools.Po
+	-rm -f minizip/$(DEPDIR)/proxytrack-unzip.Po
+	-rm -f minizip/$(DEPDIR)/proxytrack-zip.Po
+	-rm -f proxy/$(DEPDIR)/proxytrack-main.Po
+	-rm -f proxy/$(DEPDIR)/proxytrack-proxytrack.Po
+	-rm -f proxy/$(DEPDIR)/proxytrack-store.Po
 	-rm -f Makefile
 distclean-am: clean-am distclean-compile distclean-generic \
 	distclean-tags
@@ -1393,7 +1502,53 @@ install-ps-am:
 installcheck-am:

 maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR) coucal/$(DEPDIR) minizip/$(DEPDIR) proxy/$(DEPDIR)
+		-rm -f ./$(DEPDIR)/htsjava.Plo
+	-rm -f ./$(DEPDIR)/htsserver-htsserver.Po
+	-rm -f ./$(DEPDIR)/htsserver-htsweb.Po
+	-rm -f ./$(DEPDIR)/httrack.Po
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsalias.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsback.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsbauth.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htscache.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htscatchurl.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htscharset.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsconcat.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htscore.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htscoremain.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsencoding.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsfilters.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsftp.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htshash.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htshelp.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsindex.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htslib.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsmd5.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsmodules.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsname.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsparse.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsrobots.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htsthread.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htstools.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htswizard.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htswrap.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-htszlib.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-md5.Plo
+	-rm -f ./$(DEPDIR)/libhttrack_la-punycode.Plo
+	-rm -f ./$(DEPDIR)/proxytrack-htsmd5.Po
+	-rm -f ./$(DEPDIR)/proxytrack-md5.Po
+	-rm -f coucal/$(DEPDIR)/libhttrack_la-coucal.Plo
+	-rm -f coucal/$(DEPDIR)/proxytrack-coucal.Po
+	-rm -f minizip/$(DEPDIR)/libhttrack_la-ioapi.Plo
+	-rm -f minizip/$(DEPDIR)/libhttrack_la-mztools.Plo
+	-rm -f minizip/$(DEPDIR)/libhttrack_la-unzip.Plo
+	-rm -f minizip/$(DEPDIR)/libhttrack_la-zip.Plo
+	-rm -f minizip/$(DEPDIR)/proxytrack-ioapi.Po
+	-rm -f minizip/$(DEPDIR)/proxytrack-mztools.Po
+	-rm -f minizip/$(DEPDIR)/proxytrack-unzip.Po
+	-rm -f minizip/$(DEPDIR)/proxytrack-zip.Po
+	-rm -f proxy/$(DEPDIR)/proxytrack-main.Po
+	-rm -f proxy/$(DEPDIR)/proxytrack-proxytrack.Po
+	-rm -f proxy/$(DEPDIR)/proxytrack-store.Po
 	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic

@@ -1415,7 +1570,7 @@ uninstall-am: uninstall-DevIncludesDATA uninstall-binPROGRAMS \

 .MAKE: install-am install-strip

-.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean \
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
 	clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
 	clean-libtool cscopelist-am ctags ctags-am distclean \
 	distclean-compile distclean-generic distclean-libtool \
@@ -1433,6 +1588,8 @@ uninstall-am: uninstall-DevIncludesDATA uninstall-binPROGRAMS \
 	uninstall-binPROGRAMS uninstall-libLTLIBRARIES \
 	uninstall-whttrackrunSCRIPTS

+.PRECIOUS: Makefile
+

 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
--- a/templates/Makefile.in
+++ b/templates/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.16.3 from Makefile.am.
 # @configure_input@

-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2020 Free Software Foundation, Inc.

 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -15,7 +15,17 @@
@SET_MAKE@

 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
@@ -79,7 +89,6 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = templates
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
@@ -88,6 +97,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
@@ -141,6 +151,7 @@ am__uninstall_files_from_dir = { \
 am__installdirs = "$(DESTDIR)$(templatesdir)"
 DATA = $(templates_DATA)
 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -154,7 +165,6 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
 CYGPATH_W = @CYGPATH_W@
@@ -173,7 +183,6 @@ EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
 HTTPS_SUPPORT = @HTTPS_SUPPORT@
 ICONV_LIBS = @ICONV_LIBS@
 INSTALL = @INSTALL@
@@ -191,6 +200,7 @@ LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_CV_OBJDIR = @LT_CV_OBJDIR@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -267,6 +277,7 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
+runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
@@ -296,14 +307,13 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu templates/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu templates/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
 	esac;

 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -348,7 +358,10 @@ ctags CTAGS:
 cscope cscopelist:


-distdir: $(DISTFILES)
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -496,6 +509,8 @@ uninstall-am: uninstall-templatesDATA
 	mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
 	uninstall-am uninstall-templatesDATA

+.PRECIOUS: Makefile
+

 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
--- a/tests/Makefile.in
+++ b/tests/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.16.3 from Makefile.am.
 # @configure_input@

-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2020 Free Software Foundation, Inc.

 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -14,7 +14,17 @@

@SET_MAKE@
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
@@ -78,8 +88,6 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = tests
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(top_srcdir)/test-driver
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
@@ -88,6 +96,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
@@ -294,6 +303,7 @@ am__set_TESTS_bases = \
  bases='$(TEST_LOGS)'; \
  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
  bases=`echo $$bases`
+AM_TESTSUITE_SUMMARY_HEADER = ' for $(PACKAGE_STRING)'
 RECHECK_LOGS = $(TEST_LOGS)
 AM_RECURSIVE_TARGETS = check recheck
 TEST_SUITE_LOG = test-suite.log
@@ -313,6 +323,7 @@ am__set_b = \
    *) \
      b='$*';; \
  esac
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/test-driver
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -326,7 +337,6 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
 CYGPATH_W = @CYGPATH_W@
@@ -345,7 +355,6 @@ EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
 HTTPS_SUPPORT = @HTTPS_SUPPORT@
 ICONV_LIBS = @ICONV_LIBS@
 INSTALL = @INSTALL@
@@ -363,6 +372,7 @@ LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_CV_OBJDIR = @LT_CV_OBJDIR@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -439,6 +449,7 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
+runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
@@ -472,14 +483,13 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu tests/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
 	esac;

 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -533,7 +543,7 @@ $(TEST_SUITE_LOG): $(TEST_LOGS)
 	if test -n "$$am__remaking_logs"; then \
 	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
 	       "recursion detected" >&2; \
-	else \
+	elif test -n "$$redo_logs"; then \
 	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
 	fi; \
 	if $(am__make_dryrun); then :; else \
@@ -610,7 +620,7 @@ $(TEST_SUITE_LOG): $(TEST_LOGS)
 	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
 	fi;								\
 	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}Testsuite summary"$(AM_TESTSUITE_SUMMARY_HEADER)"$${std}";	\
 	echo "$${col}$$br$${std}"; 					\
 	create_testsuite_report --maybe-color;				\
 	echo "$$col$$br$$std";						\
@@ -623,7 +633,7 @@ $(TEST_SUITE_LOG): $(TEST_LOGS)
 	fi;								\
 	$$success || exit 1

-check-TESTS:
+check-TESTS: 
 	@list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
 	@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
 	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
@@ -659,7 +669,10 @@ recheck: all
@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)

-distdir: $(DISTFILES)
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -809,6 +822,8 @@ uninstall-am:
 	mostlyclean-libtool pdf pdf-am ps ps-am recheck tags-am \
 	uninstall uninstall-am

+.PRECIOUS: Makefile
+

 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.