tests: add a golden cache-format read regression test

The -#A cache self-test writes the cache with the same build it reads back,
a round-trip that by construction cannot catch a read-path or on-disk-ZIP
format regression: a writer and reader that drift together still agree. The
batch-6 read-path bounds work (ZIP_READFIELD_STRING, the r.adr/r.location
NUL invariant) had no guard against exactly that.

Add a hidden -#B subcommand that reads a committed, frozen new.zip
(tests/fixtures/cache-golden) and asserts a fixed set of entries -- normal
HTML, an empty redirect with a Location, JSON, a binary body with embedded
NUL and high bytes plus a Content-Disposition, a 404 -- still decodes field
for field and byte for byte. The fixture is a witness written once by an
earlier build; the table in htscache_selftest.c that defines the
expectations also regenerates it via `-#B <dir> regen`, used only when the
format changes on purpose. Every body stays in the ZIP (all_in_cache=1), so
reading needs only new.zip with no on-disk body, timestamp, or path
dependency -- portable across machines and through make distcheck's
read-only srcdir.

check_entry now also asserts Content-Disposition (cdispo) and tags its
diagnostics with the running mode (cache-selftest vs cache-golden).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Signed-off-by: Xavier Roche <roche@httrack.com>

.github/workflows/ci.yml

@@ -320,37 +320,17 @@ jobs:
   lint:
     name: lint (shellcheck, shfmt)
     runs-on: ubuntu-24.04
-    env:
-      SHFMT_VERSION: v3.8.0
     steps:
       - uses: actions/checkout@v6
 
-      # shfmt is a pinned release binary, so it never changes: cache it keyed on
-      # the version. Same rationale as the git-clang-format driver below -- avoid
-      # re-downloading an unchanging file from github.com on every run.
-      - name: Cache shfmt binary
-        uses: actions/cache@v4
-        with:
-          path: ~/.cache/shfmt/shfmt
-          key: shfmt-${{ env.SHFMT_VERSION }}-${{ runner.arch }}
-
       - name: Install linters
         run: |
           set -euo pipefail
           sudo apt-get update
-          sudo apt-get install -y --no-install-recommends shellcheck
-          # shfmt is not packaged in apt; fetch a pinned release binary (cold
-          # cache only), retrying through transient errors.
-          shfmt="$HOME/.cache/shfmt/shfmt"
-          if [ ! -s "$shfmt" ]; then
-            echo "shfmt cache MISS: fetching ${SHFMT_VERSION} from github.com"
-            mkdir -p "$(dirname "$shfmt")"
-            curl --retry 5 --retry-all-errors -fsSL -o "$shfmt" \
-              "https://github.com/mvdan/sh/releases/download/${SHFMT_VERSION}/shfmt_${SHFMT_VERSION}_linux_$(dpkg --print-architecture)"
-          else
-            echo "shfmt cache HIT: using cached ${SHFMT_VERSION}"
-          fi
-          sudo install -m 0755 "$shfmt" /usr/local/bin/shfmt
+          # noble ships shfmt 3.8.0 (universe), matching the pinned local dev
+          # version; use it rather than fetching a release binary from github.com.
+          sudo apt-get install -y --no-install-recommends shellcheck shfmt
+          shfmt --version
 
       # Lint the scripts we maintain; the legacy scripts are a separate cleanup.
       - name: shellcheck
@@ -366,24 +346,11 @@ jobs:
     name: format (clang-format-19, changed lines)
     if: github.event_name == 'pull_request'
     runs-on: ubuntu-24.04
-    env:
-      # Single-source the tag so the cache key and the fetch URL can never drift.
-      LLVM_TAG: llvmorg-19.1.7
     steps:
       - uses: actions/checkout@v6
         with:
           fetch-depth: 0
 
-      # The git-clang-format driver is pinned to an immutable release tag, so the
-      # fetched file never changes: cache it keyed on the tag. raw.githubusercontent.com
-      # 429-rate-limits the shared runner egress IPs, and re-downloading an unchanging
-      # file every run was the only thing that could (and did) hit that limit.
-      - name: Cache git-clang-format driver
-        uses: actions/cache@v4
-        with:
-          path: ~/.cache/git-clang-format/git-clang-format
-          key: git-clang-format-${{ env.LLVM_TAG }}
-
       - name: Install clang-format 19 (pinned, from apt.llvm.org)
         run: |
           set -euo pipefail
@@ -394,17 +361,9 @@ jobs:
             | sudo tee /etc/apt/sources.list.d/llvm-19.list >/dev/null
           sudo apt-get update
           sudo apt-get install -y --no-install-recommends clang-format-19
-          # Cold cache only: fetch the driver, retrying through transient 429s.
-          driver="$HOME/.cache/git-clang-format/git-clang-format"
-          if [ ! -s "$driver" ]; then
-            echo "git-clang-format cache MISS: fetching ${LLVM_TAG} from raw.githubusercontent.com"
-            mkdir -p "$(dirname "$driver")"
-            curl --retry 5 --retry-all-errors -fsSL -o "$driver" \
-              "https://raw.githubusercontent.com/llvm/llvm-project/${LLVM_TAG}/clang/tools/clang-format/git-clang-format"
-          else
-            echo "git-clang-format cache HIT: using cached ${LLVM_TAG}"
-          fi
-          sudo install -m 0755 "$driver" /usr/local/bin/git-clang-format
+          # The clang-format-19 package ships the git-clang-format driver;
+          # expose it unsuffixed so "git clang-format" finds it.
+          sudo ln -sf /usr/bin/git-clang-format-19 /usr/local/bin/git-clang-format
           clang-format-19 --version
 
       - name: Check formatting of changed lines
@@ -418,10 +377,9 @@ jobs:
                     --diff --extensions c,h "$base")"
           rc=$?
           set -e
-          # Classify by output first: a non-empty diff means "not clean",
-          # regardless of the driver's exit convention (the release-tag driver
-          # exits 0 and signals via stdout; some packaged drivers exit 1 on a
-          # diff). A nonzero exit with clean output is a real checker error.
+          # Classify by output, not exit code: a non-empty diff means "not
+          # clean" (git-clang-format may exit 0 or 1 on a diff). A nonzero exit
+          # with clean output is a real checker error.
           case "$diff" in
             "" | "no modified files to format" | *"did not modify any files"*)
               if [ "$rc" -ne 0 ]; then

.gitignore

@@ -0,0 +1,41 @@
+# Generated by autoreconf/bootstrap (run ./bootstrap after a fresh clone).
+# Release tarballs ("make dist") ship these; the git tree does not.
+/configure
+/config.h.in
+/config.h.in~
+/aclocal.m4
+/ltmain.sh
+/libtool
+/config.guess
+/config.sub
+/install-sh
+/missing
+/depcomp
+/compile
+/ar-lib
+/test-driver
+/autom4te.cache/
+/m4/libtool.m4
+/m4/lt*.m4
+Makefile.in
+
+# Generated by configure / make.
+/config.h
+/config.log
+/config.status
+/stamp-h1
+Makefile
+.deps/
+.libs/
+*.o
+*.lo
+*.la
+*.so
+*.so.*
+*.a
+
+# make dist output.
+/httrack-*.tar.gz
+
+# Editor / autotools backup files.
+*~

AGENTS.md

@@ -5,13 +5,18 @@ the operational checklist: toolchain, invariants, and how to ship a change.
 
 ## Build & test
 - Fresh clone first: `git submodule update --init src/coucal`
-- `bash configure && make && make check`
+- `./bootstrap` (regenerates `configure` via `autoreconf`; needs autoconf,
+  automake, libtool), then `bash configure && make && make check`. Or run
+  `sh build.sh` to do bootstrap + configure + make in one shot.
 
 ## Hard invariants
-- **Toolchain edit** (`configure.ac`, any `Makefile.am`, `m4/`) → run
-  `autoreconf -fi` and commit the regenerated tracked files. The repo ships the
-  generated `configure`/`Makefile.in` so users build without autotools; CI does
-  **not** catch staleness.
+- **Generated autotools files are NOT in git.** `configure`, every
+  `Makefile.in`, `config.h.in`, `ltmain.sh`, `config.guess/sub`, and the aux
+  scripts are build products: `.gitignore`d, regenerated by `./bootstrap`, and
+  shipped only in `make dist` tarballs (so tarball users still need no
+  autotools). Never commit them. After editing `configure.ac`, any
+  `Makefile.am`, or `m4/`, just commit those sources — re-run `./bootstrap`
+  locally to rebuild and test, but do not stage the regenerated output.
 - **Format only changed lines** with `git clang-format` (clang-format 19). Never
   reformat untouched code: the engine was formatted by an old tool and won't
   round-trip.

INSTALL.Linux

@@ -7,4 +7,15 @@ On most systems (including GNU/Linux), installing can be easily achieved using t
 -or- (if not compiling as root)
 ./configure --prefix=$HOME && make && make install
 
+Building from a git checkout (not a release tarball) first needs the build
+system regenerated, which requires autoconf, automake and libtool:
+
+./bootstrap
+./configure && make && make install
+
+You can also use the one-shot wrapper, which runs bootstrap, configure and make
+(extra arguments are passed to configure):
+
+./build.sh --prefix=$HOME
+
 See also the INSTALL generic help file.

Makefile.am

@@ -5,7 +5,8 @@ ACLOCAL_AMFLAGS = -I m4
 
 EXTRA_DIST = INSTALL.Linux \
 		gpl-fr.txt license.txt greetings.txt history.txt \
-		httrack-doc.html lang.def README.md tools/mkdeb.sh
+		httrack-doc.html lang.def README.md tools/mkdeb.sh \
+		bootstrap build.sh
 
 # Build the signed Debian packages from a clean source export. Pass the signing
 # key and other options through DEB_FLAGS, e.g.:

Makefile.in

@@ -1,871 +0,0 @@
-# Makefile.in generated by automake 1.17 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2024 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-am__rm_f = rm -f $(am__rm_f_notfound)
-am__rm_rf = rm -rf $(am__rm_f_notfound)
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/snprintf.m4 \
-	$(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
-	$(am__configure_deps) $(am__DIST_COMMON)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-data-recursive install-dvi-recursive \
-	install-exec-recursive install-html-recursive \
-	install-info-recursive install-pdf-recursive \
-	install-ps-recursive install-recursive installcheck-recursive \
-	installdirs-recursive pdf-recursive ps-recursive \
-	tags-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
-  $(RECURSIVE_TARGETS) \
-  $(RECURSIVE_CLEAN_TARGETS) \
-  $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	cscope distdir distdir-am dist dist-all distcheck
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
-	config.h.in
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-DIST_SUBDIRS = $(SUBDIRS)
-am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in AUTHORS \
-	COPYING ChangeLog INSTALL NEWS README compile config.guess \
-	config.sub install-sh ltmain.sh missing
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  if test -d "$(distdir)"; then \
-    find "$(distdir)" -type d ! -perm -700 -exec chmod u+rwx {} ';' \
-      ; rm -rf "$(distdir)" \
-      || { sleep 5 && rm -rf "$(distdir)"; }; \
-  else :; fi
-am__post_remove_distdir = $(am__remove_distdir)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = -9
-DIST_TARGETS = dist-gzip
-# Exists only to be overridden by the user if desired.
-AM_DISTCHECK_DVI_TARGET = dvi
-distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
-  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = \
-  find . \( -type f -a \! \
-            \( -name .nfs* -o -name .smb* -o -name .__afs* \) \) -print
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_CFLAGS = @AM_CFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BASH = @BASH@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CFLAGS_PIE = @CFLAGS_PIE@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPPFLAGS = @CPPFLAGS@
-CSCOPE = @CSCOPE@
-CTAGS = @CTAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CFLAGS = @DEFAULT_CFLAGS@
-DEFAULT_LDFLAGS = @DEFAULT_LDFLAGS@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DL_LIBS = @DL_LIBS@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-ETAGS = @ETAGS@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-FILECMD = @FILECMD@
-GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-HTTPS_SUPPORT = @HTTPS_SUPPORT@
-ICONV_LIBS = @ICONV_LIBS@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LDFLAGS_PIE = @LDFLAGS_PIE@
-LFS_FLAG = @LFS_FLAG@
-LIBC_FORCE_LINK = @LIBC_FORCE_LINK@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_CV_OBJDIR = @LT_CV_OBJDIR@
-LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-ONLINE_UNIT_TESTS = @ONLINE_UNIT_TESTS@
-OPENSSL_LIBS = @OPENSSL_LIBS@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SHLIBPATH_VAR = @SHLIBPATH_VAR@
-SOCKET_LIBS = @SOCKET_LIBS@
-STRIP = @STRIP@
-THREADS_CFLAGS = @THREADS_CFLAGS@
-THREADS_LIBS = @THREADS_LIBS@
-V6_FLAG = @V6_FLAG@
-VERSION = @VERSION@
-VERSION_INFO = @VERSION_INFO@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__rm_f_notfound = @am__rm_f_notfound@
-am__tar = @am__tar@
-am__untar = @am__untar@
-am__xargs_n = @am__xargs_n@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-runstatedir = @runstatedir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-SUBDIRS = src man m4 libtest templates lang html tests
-ACLOCAL_AMFLAGS = -I m4
-EXTRA_DIST = INSTALL.Linux \
-		gpl-fr.txt license.txt greetings.txt history.txt \
-		httrack-doc.html lang.def README.md tools/mkdeb.sh
-
-
-# Build the signed Debian packages from a clean source export. Pass the signing
-# key and other options through DEB_FLAGS, e.g.:
-#   make deb DEB_FLAGS="--key BB71C7E6CB1AD8FAF53FE42A60C3AA7180598EFB"
-# See tools/mkdeb.sh --help for all options.
-DEB_FLAGS = 
-all: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-am--refresh: Makefile
-	@:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
-	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	$(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-
-config.h: stamp-h1
-	@test -f $@ || rm -f stamp-h1
-	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-	$(AM_V_at)rm -f stamp-h1
-	$(AM_V_GEN)cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
-	$(AM_V_GEN)($(am__cd) $(top_srcdir) && $(AUTOHEADER))
-	$(AM_V_at)rm -f stamp-h1
-	$(AM_V_at)touch $@
-
-distclean-hdr:
-	-rm -f config.h stamp-h1
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool config.lt
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
-	@fail=; \
-	if $(am__make_keepgoing); then \
-	  failcom='fail=yes'; \
-	else \
-	  failcom='exit 1'; \
-	fi; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscope: cscope.files
-	test ! -s cscope.files \
-	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
-clean-cscope:
-	-rm -f cscope.files
-cscope.files: clean-cscope cscopelist
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
-distdir: $(BUILT_SOURCES)
-	$(MAKE) $(AM_MAKEFLAGS) distdir-am
-
-distdir-am: $(DISTFILES)
-	$(am__remove_distdir)
-	$(AM_V_at)$(MKDIR_P) "$(distdir)"
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	-test -n "$(am__skip_mode_fix)" \
-	|| find "$(distdir)" -type d ! -perm -755 \
-		-exec chmod u+rwx,go+rx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r "$(distdir)"
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
-	$(am__post_remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-	$(am__post_remove_distdir)
-
-dist-lzip: distdir
-	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
-	$(am__post_remove_distdir)
-
-dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
-	$(am__post_remove_distdir)
-
-dist-zstd: distdir
-	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
-	$(am__post_remove_distdir)
-
-dist-tarZ: distdir
-	@echo WARNING: "Support for distribution archives compressed with" \
-		       "legacy program 'compress' is deprecated." >&2
-	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__post_remove_distdir)
-
-dist-shar: distdir
-	@echo WARNING: "Support for shar distribution archives is" \
-	               "deprecated." >&2
-	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
-	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
-	$(am__post_remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__post_remove_distdir)
-
-dist dist-all:
-	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
-	$(am__post_remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  eval GZIP= gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lz*) \
-	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
-	*.tar.xz*) \
-	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  eval GZIP= gzip -dc $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	*.tar.zst*) \
-	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
-	esac
-	chmod -R a-w $(distdir)
-	chmod u+w $(distdir)
-	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
-	chmod a-w $(distdir)
-	test -d $(distdir)/_build || exit 0; \
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build/sub \
-	  && ../../configure \
-	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	    --srcdir=../.. --prefix="$$dc_install_base" \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
-	  && cd "$$am__cwd" \
-	  || exit 1
-	$(am__post_remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
-	@test -n '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: trying to run $@ with an empty' \
-	       '$$(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	$(am__cd) '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile config.h
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-$(am__rm_f) $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr \
-	distclean-libtool distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(am__recursive_targets) all install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
-	am--refresh check check-am clean clean-cscope clean-generic \
-	clean-libtool cscope cscopelist-am ctags ctags-am dist \
-	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
-	dist-xz dist-zip dist-zstd distcheck distclean \
-	distclean-generic distclean-hdr distclean-libtool \
-	distclean-tags distcleancheck distdir distuninstallcheck dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs installdirs-am \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags tags-am uninstall uninstall-am
-
-.PRECIOUS: Makefile
-
-deb:
-	$(SHELL) $(top_srcdir)/tools/mkdeb.sh $(DEB_FLAGS)
-.PHONY: deb
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
-
-# Tell GNU make to disable its built-in pattern rules.
-%:: %,v
-%:: RCS/%,v
-%:: RCS/%
-%:: s.%
-%:: SCCS/s.%

README.md

@@ -22,8 +22,22 @@ HTTrack can also update an existing mirrored site, and resume interrupted downlo
 http://www.httrack.com/
 
 ## Compile trunk release
+
+A git checkout ships only the autotools sources, so `./bootstrap` (which runs
+`autoreconf`) regenerates `configure` first; this needs autoconf, automake and
+libtool. Released tarballs already include `configure`, so building from a
+tarball skips `./bootstrap`.
+
 ```sh
 git clone https://github.com/xroche/httrack.git --recurse-submodules
 cd httrack
+./bootstrap
 ./configure --prefix=$HOME/usr && make -j8 && make install
 ```
+
+Or use the one-shot wrapper (bootstrap + configure + make), which forwards its
+arguments to `configure`:
+
+```sh
+./build.sh --prefix=$HOME/usr
+```

bootstrap

@@ -0,0 +1,24 @@
+#!/bin/sh
+#
+# Regenerate the autotools build system (configure, Makefile.in, config.h.in,
+# libtool, the aux scripts) from configure.ac and the Makefile.am files.
+#
+# Run this once after a fresh git clone, before ./configure. Release tarballs
+# (made with "make dist") already ship these files, so people building from a
+# tarball do not need autotools and do not run this.
+#
+# Requires: autoconf, automake, libtool (the autoreconf toolchain).
+
+set -e
+
+# shellcheck disable=SC1007  # "CDPATH= cd" is a deliberate empty-CDPATH prefix.
+srcdir=$(CDPATH= cd -- "$(dirname -- "$0")" && pwd)
+cd "$srcdir"
+
+if ! command -v autoreconf >/dev/null 2>&1; then
+    echo "bootstrap: autoreconf not found; install autoconf, automake and libtool" >&2
+    echo "           (or build from a release tarball, which ships ./configure)" >&2
+    exit 1
+fi
+
+exec autoreconf -fi "$@"

build.sh

@@ -0,0 +1,34 @@
+#!/bin/sh
+#
+# One-shot build from a git checkout: bootstrap (autoreconf) -> configure -> make.
+# A convenience wrapper; the canonical steps are ./bootstrap && ./configure && make.
+#
+# Extra arguments are passed straight to ./configure, e.g.
+#   ./build.sh --prefix="$HOME" --disable-https
+#
+# Build out of tree (recommended; required if the source tree is read-only or
+# mounted noexec) by pointing BUILD_DIR at a scratch directory:
+#   BUILD_DIR=/var/tmp/httrack-build ./build.sh
+#
+# On a noexec filesystem the executable bit does not take effect, so invoke the
+# script explicitly with sh:  sh build.sh
+#
+# Requires autoconf/automake/libtool (for bootstrap); the release tarball ships
+# ./configure, so from a tarball just run ./configure && make.
+
+set -e
+
+# shellcheck disable=SC1007  # "CDPATH= cd" is a deliberate empty-CDPATH prefix.
+srcdir=$(CDPATH= cd -- "$(dirname -- "$0")" && pwd)
+
+# 1. Regenerate the build system in the source tree (autotools requires it).
+sh "$srcdir/bootstrap"
+
+# 2. Configure and build, out of tree when BUILD_DIR is set.
+builddir=${BUILD_DIR:-$srcdir}
+mkdir -p "$builddir"
+cd "$builddir"
+# Invoke configure via the shell, not execve: it is a portable sh script, and a
+# noexec source tree (or a cleared executable bit) would make ./configure fail.
+"${CONFIG_SHELL:-/bin/sh}" "$srcdir/configure" "$@"
+make

compile

@@ -1,351 +0,0 @@
-#! /bin/sh
-# Wrapper for compilers which do not understand '-c -o'.
-
-scriptversion=2024-06-19.01; # UTC
-
-# Copyright (C) 1999-2024 Free Software Foundation, Inc.
-# Written by Tom Tromey <tromey@cygnus.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-nl='
-'
-
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent tools from complaining about whitespace usage.
-IFS=" ""	$nl"
-
-file_conv=
-
-# func_file_conv build_file lazy
-# Convert a $build file to $host form and store it in $file
-# Currently only supports Windows hosts. If the determined conversion
-# type is listed in (the comma separated) LAZY, no conversion will
-# take place.
-func_file_conv ()
-{
-  file=$1
-  case $file in
-    / | /[!/]*) # absolute file, and not a UNC file
-      if test -z "$file_conv"; then
-	# lazily determine how to convert abs files
-	case `uname -s` in
-	  MINGW*)
-	    file_conv=mingw
-	    ;;
-	  CYGWIN* | MSYS*)
-	    file_conv=cygwin
-	    ;;
-	  *)
-	    file_conv=wine
-	    ;;
-	esac
-      fi
-      case $file_conv/,$2, in
-	*,$file_conv,*)
-	  ;;
-	mingw/*)
-	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
-	  ;;
-	cygwin/* | msys/*)
-	  file=`cygpath -m "$file" || echo "$file"`
-	  ;;
-	wine/*)
-	  file=`winepath -w "$file" || echo "$file"`
-	  ;;
-      esac
-      ;;
-  esac
-}
-
-# func_cl_dashL linkdir
-# Make cl look for libraries in LINKDIR
-func_cl_dashL ()
-{
-  func_file_conv "$1"
-  if test -z "$lib_path"; then
-    lib_path=$file
-  else
-    lib_path="$lib_path;$file"
-  fi
-  linker_opts="$linker_opts -LIBPATH:$file"
-}
-
-# func_cl_dashl library
-# Do a library search-path lookup for cl
-func_cl_dashl ()
-{
-  lib=$1
-  found=no
-  save_IFS=$IFS
-  IFS=';'
-  for dir in $lib_path $LIB
-  do
-    IFS=$save_IFS
-    if $shared && test -f "$dir/$lib.dll.lib"; then
-      found=yes
-      lib=$dir/$lib.dll.lib
-      break
-    fi
-    if test -f "$dir/$lib.lib"; then
-      found=yes
-      lib=$dir/$lib.lib
-      break
-    fi
-    if test -f "$dir/lib$lib.a"; then
-      found=yes
-      lib=$dir/lib$lib.a
-      break
-    fi
-  done
-  IFS=$save_IFS
-
-  if test "$found" != yes; then
-    lib=$lib.lib
-  fi
-}
-
-# func_cl_wrapper cl arg...
-# Adjust compile command to suit cl
-func_cl_wrapper ()
-{
-  # Assume a capable shell
-  lib_path=
-  shared=:
-  linker_opts=
-  for arg
-  do
-    if test -n "$eat"; then
-      eat=
-    else
-      case $1 in
-	-o)
-	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
-	  eat=1
-	  case $2 in
-	    *.o | *.lo | *.[oO][bB][jJ])
-	      func_file_conv "$2"
-	      set x "$@" -Fo"$file"
-	      shift
-	      ;;
-	    *)
-	      func_file_conv "$2"
-	      set x "$@" -Fe"$file"
-	      shift
-	      ;;
-	  esac
-	  ;;
-	-I)
-	  eat=1
-	  func_file_conv "$2" mingw
-	  set x "$@" -I"$file"
-	  shift
-	  ;;
-	-I*)
-	  func_file_conv "${1#-I}" mingw
-	  set x "$@" -I"$file"
-	  shift
-	  ;;
-	-l)
-	  eat=1
-	  func_cl_dashl "$2"
-	  set x "$@" "$lib"
-	  shift
-	  ;;
-	-l*)
-	  func_cl_dashl "${1#-l}"
-	  set x "$@" "$lib"
-	  shift
-	  ;;
-	-L)
-	  eat=1
-	  func_cl_dashL "$2"
-	  ;;
-	-L*)
-	  func_cl_dashL "${1#-L}"
-	  ;;
-	-static)
-	  shared=false
-	  ;;
-	-Wl,*)
-	  arg=${1#-Wl,}
-	  save_ifs="$IFS"; IFS=','
-	  for flag in $arg; do
-	    IFS="$save_ifs"
-	    linker_opts="$linker_opts $flag"
-	  done
-	  IFS="$save_ifs"
-	  ;;
-	-Xlinker)
-	  eat=1
-	  linker_opts="$linker_opts $2"
-	  ;;
-	-*)
-	  set x "$@" "$1"
-	  shift
-	  ;;
-	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
-	  func_file_conv "$1"
-	  set x "$@" -Tp"$file"
-	  shift
-	  ;;
-	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
-	  func_file_conv "$1" mingw
-	  set x "$@" "$file"
-	  shift
-	  ;;
-	*)
-	  set x "$@" "$1"
-	  shift
-	  ;;
-      esac
-    fi
-    shift
-  done
-  if test -n "$linker_opts"; then
-    linker_opts="-link$linker_opts"
-  fi
-  exec "$@" $linker_opts
-  exit 1
-}
-
-eat=
-
-case $1 in
-  '')
-     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: compile [--help] [--version] PROGRAM [ARGS]
-
-Wrapper for compilers which do not understand '-c -o'.
-Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
-arguments, and rename the output as expected.
-
-If you are trying to build a whole package this is not the
-right script to run: please start by reading the file 'INSTALL'.
-
-Report bugs to <bug-automake@gnu.org>.
-GNU Automake home page: <https://www.gnu.org/software/automake/>.
-General help using GNU software: <https://www.gnu.org/gethelp/>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "compile (GNU Automake) $scriptversion"
-    exit $?
-    ;;
-  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
-  clang-cl | *[/\\]clang-cl | clang-cl.exe | *[/\\]clang-cl.exe | \
-  icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
-    func_cl_wrapper "$@"      # Doesn't return...
-    ;;
-esac
-
-ofile=
-cfile=
-
-for arg
-do
-  if test -n "$eat"; then
-    eat=
-  else
-    case $1 in
-      -o)
-	# configure might choose to run compile as 'compile cc -o foo foo.c'.
-	# So we strip '-o arg' only if arg is an object.
-	eat=1
-	case $2 in
-	  *.o | *.obj)
-	    ofile=$2
-	    ;;
-	  *)
-	    set x "$@" -o "$2"
-	    shift
-	    ;;
-	esac
-	;;
-      *.c)
-	cfile=$1
-	set x "$@" "$1"
-	shift
-	;;
-      *)
-	set x "$@" "$1"
-	shift
-	;;
-    esac
-  fi
-  shift
-done
-
-if test -z "$ofile" || test -z "$cfile"; then
-  # If no '-o' option was seen then we might have been invoked from a
-  # pattern rule where we don't need one.  That is ok -- this is a
-  # normal compilation that the losing compiler can handle.  If no
-  # '.c' file was seen then we are probably linking.  That is also
-  # ok.
-  exec "$@"
-fi
-
-# Name of file we expect compiler to create.
-cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
-
-# Create the lock directory.
-# Note: use '[/\\:.-]' here to ensure that we don't use the same name
-# that we are using for the .o file.  Also, base the name on the expected
-# object file name, since that is what matters with a parallel build.
-lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
-while true; do
-  if mkdir "$lockdir" >/dev/null 2>&1; then
-    break
-  fi
-  sleep 1
-done
-# FIXME: race condition here if user kills between mkdir and trap.
-trap "rmdir '$lockdir'; exit 1" 1 2 15
-
-# Run the compile.
-"$@"
-ret=$?
-
-if test -f "$cofile"; then
-  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
-elif test -f "${cofile}bj"; then
-  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
-fi
-
-rmdir "$lockdir"
-exit $ret
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
-# End:

config.h.in

@@ -1,222 +0,0 @@
-/* config.h.in.  Generated from configure.ac by autoheader.  */
-
-/* Check for dlopen in c */
-#undef DLLIB
-
-/* Define if pointers to integers require aligned access */
-#undef HAVE_ALIGNED_ACCESS_REQUIRED
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the <execinfo.h> header file. */
-#undef HAVE_EXECINFO_H
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the 'z' library (-lz). */
-#undef HAVE_LIBZ
-
-/* Define to 1 if you have the <minix/config.h> header file. */
-#undef HAVE_MINIX_CONFIG_H
-
-/* Define to 1 if you have the 'snprintf' function. */
-#undef HAVE_SNPRINTF
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdio.h> header file. */
-#undef HAVE_STDIO_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Check for strnlen */
-#undef HAVE_STRNLEN
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 or 0, depending whether the compiler supports simple visibility
-   declarations. */
-#undef HAVE_VISIBILITY
-
-/* Define to 1 if you have the 'vsnprintf' function. */
-#undef HAVE_VSNPRINTF
-
-/* Define to 1 if you have the <wchar.h> header file. */
-#undef HAVE_WCHAR_H
-
-/* Check for in_addr_t */
-#undef HTS_DO_NOT_REDEFINE_in_addr_t
-
-/* Check for IPv6 */
-#undef HTS_INET6
-
-/* Check for large files support */
-#undef HTS_LFS
-
-/* Check for OpenSSL */
-#undef HTS_USEOPENSSL
-
-/* Check for libiconv */
-#undef LIBICONV
-
-/* Check for libsocket */
-#undef LIBSOCKET
-
-/* Define to the sub-directory where libtool stores uninstalled libraries. */
-#undef LT_OBJDIR
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* "enable replacement (v)snprintf if system (v)snprintf is broken" */
-#undef PREFER_PORTABLE_SNPRINTF
-
-/* Check for setuid */
-#undef SETUID
-
-/* The size of 'long long', as computed by sizeof. */
-#undef SIZEOF_LONG_LONG
-
-/* Define to 1 if all of the C89 standard headers exist (not just the ones
-   required in a freestanding environment). This macro is provided for
-   backward compatibility; new code need not use it. */
-#undef STDC_HEADERS
-
-/* Check for pthread in pthreads */
-#undef THREADS
-
-/* Enable extensions on AIX, Interix, z/OS.  */
-#ifndef _ALL_SOURCE
-# undef _ALL_SOURCE
-#endif
-/* Enable general extensions on macOS.  */
-#ifndef _DARWIN_C_SOURCE
-# undef _DARWIN_C_SOURCE
-#endif
-/* Enable general extensions on Solaris.  */
-#ifndef __EXTENSIONS__
-# undef __EXTENSIONS__
-#endif
-/* Enable GNU extensions on systems that have them.  */
-#ifndef _GNU_SOURCE
-# undef _GNU_SOURCE
-#endif
-/* Enable X/Open compliant socket functions that do not require linking
-   with -lxnet on HP-UX 11.11.  */
-#ifndef _HPUX_ALT_XOPEN_SOCKET_API
-# undef _HPUX_ALT_XOPEN_SOCKET_API
-#endif
-/* Identify the host operating system as Minix.
-   This macro does not affect the system headers' behavior.
-   A future release of Autoconf may stop defining this macro.  */
-#ifndef _MINIX
-# undef _MINIX
-#endif
-/* Enable general extensions on NetBSD.
-   Enable NetBSD compatibility extensions on Minix.  */
-#ifndef _NETBSD_SOURCE
-# undef _NETBSD_SOURCE
-#endif
-/* Enable OpenBSD compatibility extensions on NetBSD.
-   Oddly enough, this does nothing on OpenBSD.  */
-#ifndef _OPENBSD_SOURCE
-# undef _OPENBSD_SOURCE
-#endif
-/* Define to 1 if needed for POSIX-compatible behavior.  */
-#ifndef _POSIX_SOURCE
-# undef _POSIX_SOURCE
-#endif
-/* Define to 2 if needed for POSIX-compatible behavior.  */
-#ifndef _POSIX_1_SOURCE
-# undef _POSIX_1_SOURCE
-#endif
-/* Enable POSIX-compatible threading on Solaris.  */
-#ifndef _POSIX_PTHREAD_SEMANTICS
-# undef _POSIX_PTHREAD_SEMANTICS
-#endif
-/* Enable extensions specified by ISO/IEC TS 18661-5:2014.  */
-#ifndef __STDC_WANT_IEC_60559_ATTRIBS_EXT__
-# undef __STDC_WANT_IEC_60559_ATTRIBS_EXT__
-#endif
-/* Enable extensions specified by ISO/IEC TS 18661-1:2014.  */
-#ifndef __STDC_WANT_IEC_60559_BFP_EXT__
-# undef __STDC_WANT_IEC_60559_BFP_EXT__
-#endif
-/* Enable extensions specified by ISO/IEC TS 18661-2:2015.  */
-#ifndef __STDC_WANT_IEC_60559_DFP_EXT__
-# undef __STDC_WANT_IEC_60559_DFP_EXT__
-#endif
-/* Enable extensions specified by C23 Annex F.  */
-#ifndef __STDC_WANT_IEC_60559_EXT__
-# undef __STDC_WANT_IEC_60559_EXT__
-#endif
-/* Enable extensions specified by ISO/IEC TS 18661-4:2015.  */
-#ifndef __STDC_WANT_IEC_60559_FUNCS_EXT__
-# undef __STDC_WANT_IEC_60559_FUNCS_EXT__
-#endif
-/* Enable extensions specified by C23 Annex H and ISO/IEC TS 18661-3:2015.  */
-#ifndef __STDC_WANT_IEC_60559_TYPES_EXT__
-# undef __STDC_WANT_IEC_60559_TYPES_EXT__
-#endif
-/* Enable extensions specified by ISO/IEC TR 24731-2:2010.  */
-#ifndef __STDC_WANT_LIB_EXT2__
-# undef __STDC_WANT_LIB_EXT2__
-#endif
-/* Enable extensions specified by ISO/IEC 24747:2009.  */
-#ifndef __STDC_WANT_MATH_SPEC_FUNCS__
-# undef __STDC_WANT_MATH_SPEC_FUNCS__
-#endif
-/* Enable extensions on HP NonStop.  */
-#ifndef _TANDEM_SOURCE
-# undef _TANDEM_SOURCE
-#endif
-/* Enable X/Open extensions.  Define to 500 only if necessary
-   to make mbstate_t available.  */
-#ifndef _XOPEN_SOURCE
-# undef _XOPEN_SOURCE
-#endif
-
-
-/* Version number of package */
-#undef VERSION
-
-/* in_port_t */
-#undef in_port_t
-
-/* sa_family_t */
-#undef sa_family_t

configure.ac

@@ -84,6 +84,11 @@ AX_CHECK_COMPILE_FLAG([-Wformat-nonliteral], [DEFAULT_CFLAGS="$DEFAULT_CFLAGS -W
 AX_CHECK_COMPILE_FLAG([-Wmissing-parameter-type], [DEFAULT_CFLAGS="$DEFAULT_CFLAGS -Wmissing-parameter-type"])
 AX_CHECK_COMPILE_FLAG([-Wold-style-definition], [DEFAULT_CFLAGS="$DEFAULT_CFLAGS -Wold-style-definition"])
 AX_CHECK_COMPILE_FLAG([-Wignored-qualifiers], [DEFAULT_CFLAGS="$DEFAULT_CFLAGS -Wignored-qualifiers"])
+# Make htssafe.h's pointer-dest 'warning' attribute a hard error in our build
+# (migration is at zero; a new char* dest is a regression). gcc/clang each take
+# only their own spelling; downstream keeps the plain warning, not a build break.
+AX_CHECK_COMPILE_FLAG([-Werror=attribute-warning], [DEFAULT_CFLAGS="$DEFAULT_CFLAGS -Werror=attribute-warning"])
+AX_CHECK_COMPILE_FLAG([-Werror=user-defined-warnings], [DEFAULT_CFLAGS="$DEFAULT_CFLAGS -Werror=user-defined-warnings"])
 AX_CHECK_COMPILE_FLAG([-fstrict-aliasing -Wstrict-aliasing], [DEFAULT_CFLAGS="$DEFAULT_CFLAGS -fstrict-aliasing -Wstrict-aliasing"])
 AX_CHECK_COMPILE_FLAG([-fstack-protector], [DEFAULT_CFLAGS="$DEFAULT_CFLAGS -fstack-protector"])
 AX_CHECK_COMPILE_FLAG([-fstack-clash-protection], [DEFAULT_CFLAGS="$DEFAULT_CFLAGS -fstack-clash-protection"])

depcomp

@@ -1,792 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2024-06-19.01; # UTC
-
-# Copyright (C) 1999-2024 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
-  '')
-    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
-    exit 1;
-    ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
-  depmode     Dependency tracking mode.
-  source      Source file read by 'PROGRAMS ARGS'.
-  object      Object file output by 'PROGRAMS ARGS'.
-  DEPDIR      directory where to store dependencies.
-  depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputting dependencies.
-  libtool     Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-GNU Automake home page: <https://www.gnu.org/software/automake/>.
-General help using GNU software: <https://www.gnu.org/gethelp/>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "depcomp (GNU Automake) $scriptversion"
-    exit $?
-    ;;
-esac
-
-# Get the directory component of the given path, and save it in the
-# global variables '$dir'.  Note that this directory component will
-# be either empty or ending with a '/' character.  This is deliberate.
-set_dir_from ()
-{
-  case $1 in
-    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
-      *) dir=;;
-  esac
-}
-
-# Get the suffix-stripped basename of the given path, and save it the
-# global variable '$base'.
-set_base_from ()
-{
-  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
-}
-
-# If no dependency file was actually created by the compiler invocation,
-# we still have to create a dummy depfile, to avoid errors with the
-# Makefile "include basename.Plo" scheme.
-make_dummy_depfile ()
-{
-  echo "#dummy" > "$depfile"
-}
-
-# Factor out some common post-processing of the generated depfile.
-# Requires the auxiliary global variable '$tmpdepfile' to be set.
-aix_post_process_depfile ()
-{
-  # If the compiler actually managed to produce a dependency file,
-  # post-process it.
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form 'foo.o: dependency.h'.
-    # Do two passes, one to just change these to
-    #   $object: dependency.h
-    # and one to simply output
-    #   dependency.h:
-    # which is needed to avoid the deleted-header problem.
-    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
-      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
-    } > "$depfile"
-    rm -f "$tmpdepfile"
-  else
-    make_dummy_depfile
-  fi
-}
-
-# A tabulation character.
-tab='	'
-# A newline character.
-nl='
-'
-# Character ranges might be problematic outside the C locale.
-# These definitions help.
-upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
-lower=abcdefghijklmnopqrstuvwxyz
-alpha=${upper}${lower}
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
-  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Avoid interference from the environment.
-gccflag= dashmflag=
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-  # This is just like dashmstdout with a different argument.
-  dashmflag=-xM
-  depmode=dashmstdout
-fi
-
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
-  # This is just like msvisualcpp but w/o cygpath translation.
-  # Just convert the backslash-escaped backslashes to single forward
-  # slashes to satisfy depend.m4
-  cygpath_u='sed s,\\\\,/,g'
-  depmode=msvisualcpp
-fi
-
-if test "$depmode" = msvc7msys; then
-  # This is just like msvc7 but w/o cygpath translation.
-  # Just convert the backslash-escaped backslashes to single forward
-  # slashes to satisfy depend.m4
-  cygpath_u='sed s,\\\\,/,g'
-  depmode=msvc7
-fi
-
-if test "$depmode" = xlc; then
-  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
-  gccflag=-qmakedep=gcc,-MF
-  depmode=gcc
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am.  Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
-  for arg
-  do
-    case $arg in
-    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
-    *)  set fnord "$@" "$arg" ;;
-    esac
-    shift # fnord
-    shift # $arg
-  done
-  "$@"
-  stat=$?
-  if test $stat -ne 0; then
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## Note that this doesn't just cater to obsolete pre-3.x GCC compilers.
-## but also to in-use compilers like IBM xlc/xlC and the HP C compiler.
-## (see the conditional assignment to $gccflag above).
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).  Also, it might not be
-##   supported by the other compilers which use the 'gcc' depmode.
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -ne 0; then
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  # The second -e expression handles DOS-style file names with drive
-  # letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the "deleted header file" problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-## Some versions of gcc put a space before the ':'.  On the theory
-## that the space means something, we add a space to the output as
-## well.  hp depmode also adds that space, but also prefixes the VPATH
-## to the object.  Take care to not repeat it in the output.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-  tr ' ' "$nl" < "$tmpdepfile" \
-    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
-    | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -ne 0; then
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like '#:fec' to the end of the
-    # dependency line.
-    tr ' ' "$nl" < "$tmpdepfile" \
-      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
-      | tr "$nl" ' ' >> "$depfile"
-    echo >> "$depfile"
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' "$nl" < "$tmpdepfile" \
-      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-      >> "$depfile"
-  else
-    make_dummy_depfile
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-xlc)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts '$object:' at the
-  # start of each line; $object doesn't have directory information.
-  # Version 6 uses the directory in both cases.
-  set_dir_from "$object"
-  set_base_from "$object"
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$base.u
-    tmpdepfile3=$dir.libs/$base.u
-    "$@" -Wc,-M
-  else
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$dir$base.u
-    tmpdepfile3=$dir$base.u
-    "$@" -M
-  fi
-  stat=$?
-  if test $stat -ne 0; then
-    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-    exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  aix_post_process_depfile
-  ;;
-
-tcc)
-  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
-  # FIXME: That version still under development at the moment of writing.
-  #        Make that this statement remains true also for stable, released
-  #        versions.
-  # It will wrap lines (doesn't matter whether long or short) with a
-  # trailing '\', as in:
-  #
-  #   foo.o : \
-  #    foo.c \
-  #    foo.h \
-  #
-  # It will put a trailing '\' even on the last line, and will use leading
-  # spaces rather than leading tabs (at least since its commit 0394caf7
-  # "Emit spaces for -MD").
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -ne 0; then
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
-  # We have to change lines of the first kind to '$object: \'.
-  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
-  # And for each line of the second kind, we have to emit a 'dep.h:'
-  # dummy dependency, to avoid the deleted-header problem.
-  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-## The order of this option in the case statement is important, since the
-## shell code in configure will try each of these formats in the order
-## listed in this file.  A plain '-MD' option would be understood by many
-## compilers, so we must ensure this comes after the gcc and icc options.
-pgcc)
-  # Portland's C compiler understands '-MD'.
-  # Will always output deps to 'file.d' where file is the root name of the
-  # source file under compilation, even if file resides in a subdirectory.
-  # The object file name does not affect the name of the '.d' file.
-  # pgcc 10.2 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using '\' :
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-  set_dir_from "$object"
-  # Use the source, not the object, to determine the base name, since
-  # that's sadly what pgcc will do too.
-  set_base_from "$source"
-  tmpdepfile=$base.d
-
-  # For projects that build the same source file twice into different object
-  # files, the pgcc approach of using the *source* file root name can cause
-  # problems in parallel builds.  Use a locking strategy to avoid stomping on
-  # the same $tmpdepfile.
-  lockdir=$base.d-lock
-  trap "
-    echo '$0: caught signal, cleaning up...' >&2
-    rmdir '$lockdir'
-    exit 1
-  " 1 2 13 15
-  numtries=100
-  i=$numtries
-  while test $i -gt 0; do
-    # mkdir is a portable test-and-set.
-    if mkdir "$lockdir" 2>/dev/null; then
-      # This process acquired the lock.
-      "$@" -MD
-      stat=$?
-      # Release the lock.
-      rmdir "$lockdir"
-      break
-    else
-      # If the lock is being held by a different process, wait
-      # until the winning process is done or we timeout.
-      while test -d "$lockdir" && test $i -gt 0; do
-        sleep 1
-        i=`expr $i - 1`
-      done
-    fi
-    i=`expr $i - 1`
-  done
-  trap - 1 2 13 15
-  if test $i -le 0; then
-    echo "$0: failed to acquire lock after $numtries attempts" >&2
-    echo "$0: check lockdir '$lockdir'" >&2
-    exit 1
-  fi
-
-  if test $stat -ne 0; then
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form `foo.o: dependent.h',
-  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
-  # Do two passes, one to just change these to
-  # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process this invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
-    | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp2)
-  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
-  # compilers, which have integrated preprocessors.  The correct option
-  # to use with these is +Maked; it writes dependencies to a file named
-  # 'foo.d', which lands next to the object file, wherever that
-  # happens to be.
-  # Much of this is similar to the tru64 case; see comments there.
-  set_dir_from  "$object"
-  set_base_from "$object"
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir.libs/$base.d
-    "$@" -Wc,+Maked
-  else
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir$base.d
-    "$@" +Maked
-  fi
-  stat=$?
-  if test $stat -ne 0; then
-     rm -f "$tmpdepfile1" "$tmpdepfile2"
-     exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
-    # Add 'dependent.h:' lines.
-    sed -ne '2,${
-               s/^ *//
-               s/ \\*$//
-               s/$/:/
-               p
-             }' "$tmpdepfile" >> "$depfile"
-  else
-    make_dummy_depfile
-  fi
-  rm -f "$tmpdepfile" "$tmpdepfile2"
-  ;;
-
-tru64)
-  # The Tru64 compiler uses -MD to generate dependencies as a side
-  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
-  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-  # dependencies in 'foo.d' instead, so we check for that too.
-  # Subdirectories are respected.
-  set_dir_from  "$object"
-  set_base_from "$object"
-
-  if test "$libtool" = yes; then
-    # Libtool generates 2 separate objects for the 2 libraries.  These
-    # two compilations output dependencies in $dir.libs/$base.o.d and
-    # in $dir$base.o.d.  We have to check for both files, because
-    # one of the two compilations can be disabled.  We should prefer
-    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-    # automatically cleaned when .libs/ is deleted, while ignoring
-    # the former would cause a distcleancheck panic.
-    tmpdepfile1=$dir$base.o.d          # libtool 1.5
-    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
-    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
-    "$@" -Wc,-MD
-  else
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir$base.d
-    tmpdepfile3=$dir$base.d
-    "$@" -MD
-  fi
-
-  stat=$?
-  if test $stat -ne 0; then
-    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-    exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  # Same post-processing that is required for AIX mode.
-  aix_post_process_depfile
-  ;;
-
-msvc7)
-  if test "$libtool" = yes; then
-    showIncludes=-Wc,-showIncludes
-  else
-    showIncludes=-showIncludes
-  fi
-  "$@" $showIncludes > "$tmpdepfile"
-  stat=$?
-  grep -v '^Note: including file: ' "$tmpdepfile"
-  if test $stat -ne 0; then
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  # The first sed program below extracts the file names and escapes
-  # backslashes for cygpath.  The second sed program outputs the file
-  # name when reading, but also accumulates all include files in the
-  # hold buffer in order to output them again at the end.  This only
-  # works with sed implementations that can handle large buffers.
-  sed < "$tmpdepfile" -n '
-/^Note: including file:  *\(.*\)/ {
-  s//\1/
-  s/\\/\\\\/g
-  p
-}' | $cygpath_u | sort -u | sed -n '
-s/ /\\ /g
-s/\(.*\)/'"$tab"'\1 \\/p
-s/.\(.*\) \\/\1:/
-H
-$ {
-  s/.*/'"$tab"'/
-  G
-  p
-}' >> "$depfile"
-  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
-  rm -f "$tmpdepfile"
-  ;;
-
-msvc7msys)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove '-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for ':'
-  # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
-  "$@" $dashmflag |
-    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process this sed invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  tr ' ' "$nl" < "$tmpdepfile" \
-    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
-    | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # Remove any Libtool call
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-  # X makedepend
-  shift
-  cleared=no eat=no
-  for arg
-  do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    if test $eat = yes; then
-      eat=no
-      continue
-    fi
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    # Strip any option that makedepend may not understand.  Remove
-    # the object too, otherwise makedepend will parse it as a source file.
-    -arch)
-      eat=yes ;;
-    -*|$object)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix=`echo "$object" | sed 's/^.*\././'`
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  # makedepend may prepend the VPATH from the source file name to the object.
-  # No need to regex-escape $object, excess matching of '.' is harmless.
-  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process the last invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  sed '1,2d' "$tmpdepfile" \
-    | tr ' ' "$nl" \
-    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
-    | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove '-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E \
-    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-    | sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-        set fnord "$@"
-        shift
-        shift
-        ;;
-    *)
-        set fnord "$@" "$arg"
-        shift
-        shift
-        ;;
-    esac
-  done
-  "$@" -E 2>/dev/null |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
-  echo "$tab" >> "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvcmsys)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
-# End:

html/Makefile.in

@@ -1,888 +0,0 @@
-# Makefile.in generated by automake 1.17 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2024 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-am__rm_f = rm -f $(am__rm_f_notfound)
-am__rm_rf = rm -rf $(am__rm_f_notfound)
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = html
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/snprintf.m4 \
-	$(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-  || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-       $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
-  }
-am__installdirs = "$(DESTDIR)$(HelpHtmldir)" \
-	"$(DESTDIR)$(HelpHtmlTxtdir)" "$(DESTDIR)$(HelpHtmldivdir)" \
-	"$(DESTDIR)$(HelpHtmlimagesdir)" "$(DESTDIR)$(HelpHtmlimgdir)" \
-	"$(DESTDIR)$(HelpHtmlrootdir)" "$(DESTDIR)$(MetaInfodir)" \
-	"$(DESTDIR)$(VFolderEntrydir)" "$(DESTDIR)$(WebHtmldir)" \
-	"$(DESTDIR)$(WebHtmlimagesdir)" "$(DESTDIR)$(WebIcon16x16dir)" \
-	"$(DESTDIR)$(WebIcon32x32dir)" "$(DESTDIR)$(WebIcon48x48dir)" \
-	"$(DESTDIR)$(WebPixmapdir)"
-DATA = $(HelpHtml_DATA) $(HelpHtmlTxt_DATA) $(HelpHtmldiv_DATA) \
-	$(HelpHtmlimages_DATA) $(HelpHtmlimg_DATA) \
-	$(HelpHtmlroot_DATA) $(MetaInfo_DATA) $(VFolderEntry_DATA) \
-	$(WebHtml_DATA) $(WebHtmlimages_DATA) $(WebIcon16x16_DATA) \
-	$(WebIcon32x32_DATA) $(WebIcon48x48_DATA) $(WebPixmap_DATA)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_CFLAGS = @AM_CFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BASH = @BASH@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CFLAGS_PIE = @CFLAGS_PIE@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPPFLAGS = @CPPFLAGS@
-CSCOPE = @CSCOPE@
-CTAGS = @CTAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CFLAGS = @DEFAULT_CFLAGS@
-DEFAULT_LDFLAGS = @DEFAULT_LDFLAGS@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DL_LIBS = @DL_LIBS@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-ETAGS = @ETAGS@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-FILECMD = @FILECMD@
-GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-HTTPS_SUPPORT = @HTTPS_SUPPORT@
-ICONV_LIBS = @ICONV_LIBS@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LDFLAGS_PIE = @LDFLAGS_PIE@
-LFS_FLAG = @LFS_FLAG@
-LIBC_FORCE_LINK = @LIBC_FORCE_LINK@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_CV_OBJDIR = @LT_CV_OBJDIR@
-LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-ONLINE_UNIT_TESTS = @ONLINE_UNIT_TESTS@
-OPENSSL_LIBS = @OPENSSL_LIBS@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SHLIBPATH_VAR = @SHLIBPATH_VAR@
-SOCKET_LIBS = @SOCKET_LIBS@
-STRIP = @STRIP@
-THREADS_CFLAGS = @THREADS_CFLAGS@
-THREADS_LIBS = @THREADS_LIBS@
-V6_FLAG = @V6_FLAG@
-VERSION = @VERSION@
-VERSION_INFO = @VERSION_INFO@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__rm_f_notfound = @am__rm_f_notfound@
-am__tar = @am__tar@
-am__untar = @am__untar@
-am__xargs_n = @am__xargs_n@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-runstatedir = @runstatedir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-HelpHtmlrootdir = $(docdir)
-HelpHtmldir = $(htmldir)
-HelpHtmlimgdir = $(HelpHtmldir)/img
-HelpHtmldivdir = $(HelpHtmldir)/div
-HelpHtmlimagesdir = $(HelpHtmldir)/images
-HelpHtmlTxtdir = $(HelpHtmldir)
-WebHtmldir = $(HelpHtmldir)/server
-WebHtmlimagesdir = $(HelpHtmldir)/server/images
-WebPixmapdir = $(datadir)/pixmaps
-WebIcon16x16dir = $(datadir)/icons/hicolor/16x16/apps
-WebIcon32x32dir = $(datadir)/icons/hicolor/32x32/apps
-WebIcon48x48dir = $(datadir)/icons/hicolor/48x48/apps
-VFolderEntrydir = $(prefix)/share/applications
-MetaInfodir = $(datadir)/metainfo
-
-# Wildcards are globbed against $(srcdir): a bare "*.html" is resolved against
-# the build dir and stays unexpanded (breaking "make") in an out-of-tree build.
-# Explicit filenames (e.g. ../history.txt, div/search.sh) resolve via VPATH and
-# need no prefix.
-HelpHtmlroot_DATA = ../httrack-doc.html ../history.txt
-HelpHtml_DATA = $(srcdir)/*.html
-HelpHtmldiv_DATA = div/search.sh
-HelpHtmlimg_DATA = $(srcdir)/img/*
-HelpHtmlimages_DATA = $(srcdir)/images/*
-HelpHtmlTxt_DATA = ../greetings.txt ../history.txt ../license.txt
-WebHtml_DATA = $(srcdir)/server/*.html $(srcdir)/server/*.js $(srcdir)/server/*.css
-WebHtmlimages_DATA = $(srcdir)/server/images/*
-# note: converted & normalized by
-# ico2xpm favicon.ico -o httrack.xpm
-# mogrify -format xpm -map /usr/share/doc/menu/examples/cmap.xpm httrack.xpm
-WebPixmap_DATA = $(srcdir)/server/div/*.xpm
-WebIcon16x16_DATA = $(srcdir)/server/div/16x16/*.png
-WebIcon32x32_DATA = $(srcdir)/server/div/32x32/*.png
-WebIcon48x48_DATA = $(srcdir)/server/div/48x48/*.png
-VFolderEntry_DATA = $(srcdir)/server/div/*.desktop
-MetaInfo_DATA = $(srcdir)/server/div/*.metainfo.xml
-EXTRA_DIST = $(HelpHtml_DATA) $(HelpHtmlimg_DATA) $(HelpHtmlimages_DATA) \
-	$(HelpHtmldiv_DATA) $(WebHtml_DATA) $(WebHtmlimages_DATA) \
-	$(WebPixmap_DATA) $(WebIcon16x16_DATA) $(WebIcon32x32_DATA) $(WebIcon48x48_DATA) \
-	$(VFolderEntry_DATA) $(MetaInfo_DATA) \
-	httrack.css
-
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu html/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu html/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-install-HelpHtmlDATA: $(HelpHtml_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(HelpHtml_DATA)'; test -n "$(HelpHtmldir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(HelpHtmldir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(HelpHtmldir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(HelpHtmldir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(HelpHtmldir)" || exit $$?; \
-	done
-
-uninstall-HelpHtmlDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(HelpHtml_DATA)'; test -n "$(HelpHtmldir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(HelpHtmldir)'; $(am__uninstall_files_from_dir)
-install-HelpHtmlTxtDATA: $(HelpHtmlTxt_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(HelpHtmlTxt_DATA)'; test -n "$(HelpHtmlTxtdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(HelpHtmlTxtdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(HelpHtmlTxtdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(HelpHtmlTxtdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(HelpHtmlTxtdir)" || exit $$?; \
-	done
-
-uninstall-HelpHtmlTxtDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(HelpHtmlTxt_DATA)'; test -n "$(HelpHtmlTxtdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(HelpHtmlTxtdir)'; $(am__uninstall_files_from_dir)
-install-HelpHtmldivDATA: $(HelpHtmldiv_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(HelpHtmldiv_DATA)'; test -n "$(HelpHtmldivdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(HelpHtmldivdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(HelpHtmldivdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(HelpHtmldivdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(HelpHtmldivdir)" || exit $$?; \
-	done
-
-uninstall-HelpHtmldivDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(HelpHtmldiv_DATA)'; test -n "$(HelpHtmldivdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(HelpHtmldivdir)'; $(am__uninstall_files_from_dir)
-install-HelpHtmlimagesDATA: $(HelpHtmlimages_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(HelpHtmlimages_DATA)'; test -n "$(HelpHtmlimagesdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(HelpHtmlimagesdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(HelpHtmlimagesdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(HelpHtmlimagesdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(HelpHtmlimagesdir)" || exit $$?; \
-	done
-
-uninstall-HelpHtmlimagesDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(HelpHtmlimages_DATA)'; test -n "$(HelpHtmlimagesdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(HelpHtmlimagesdir)'; $(am__uninstall_files_from_dir)
-install-HelpHtmlimgDATA: $(HelpHtmlimg_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(HelpHtmlimg_DATA)'; test -n "$(HelpHtmlimgdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(HelpHtmlimgdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(HelpHtmlimgdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(HelpHtmlimgdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(HelpHtmlimgdir)" || exit $$?; \
-	done
-
-uninstall-HelpHtmlimgDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(HelpHtmlimg_DATA)'; test -n "$(HelpHtmlimgdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(HelpHtmlimgdir)'; $(am__uninstall_files_from_dir)
-install-HelpHtmlrootDATA: $(HelpHtmlroot_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(HelpHtmlroot_DATA)'; test -n "$(HelpHtmlrootdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(HelpHtmlrootdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(HelpHtmlrootdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(HelpHtmlrootdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(HelpHtmlrootdir)" || exit $$?; \
-	done
-
-uninstall-HelpHtmlrootDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(HelpHtmlroot_DATA)'; test -n "$(HelpHtmlrootdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(HelpHtmlrootdir)'; $(am__uninstall_files_from_dir)
-install-MetaInfoDATA: $(MetaInfo_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(MetaInfo_DATA)'; test -n "$(MetaInfodir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(MetaInfodir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(MetaInfodir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(MetaInfodir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(MetaInfodir)" || exit $$?; \
-	done
-
-uninstall-MetaInfoDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(MetaInfo_DATA)'; test -n "$(MetaInfodir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(MetaInfodir)'; $(am__uninstall_files_from_dir)
-install-VFolderEntryDATA: $(VFolderEntry_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(VFolderEntry_DATA)'; test -n "$(VFolderEntrydir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(VFolderEntrydir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(VFolderEntrydir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(VFolderEntrydir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(VFolderEntrydir)" || exit $$?; \
-	done
-
-uninstall-VFolderEntryDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(VFolderEntry_DATA)'; test -n "$(VFolderEntrydir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(VFolderEntrydir)'; $(am__uninstall_files_from_dir)
-install-WebHtmlDATA: $(WebHtml_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(WebHtml_DATA)'; test -n "$(WebHtmldir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(WebHtmldir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(WebHtmldir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(WebHtmldir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(WebHtmldir)" || exit $$?; \
-	done
-
-uninstall-WebHtmlDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(WebHtml_DATA)'; test -n "$(WebHtmldir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(WebHtmldir)'; $(am__uninstall_files_from_dir)
-install-WebHtmlimagesDATA: $(WebHtmlimages_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(WebHtmlimages_DATA)'; test -n "$(WebHtmlimagesdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(WebHtmlimagesdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(WebHtmlimagesdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(WebHtmlimagesdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(WebHtmlimagesdir)" || exit $$?; \
-	done
-
-uninstall-WebHtmlimagesDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(WebHtmlimages_DATA)'; test -n "$(WebHtmlimagesdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(WebHtmlimagesdir)'; $(am__uninstall_files_from_dir)
-install-WebIcon16x16DATA: $(WebIcon16x16_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(WebIcon16x16_DATA)'; test -n "$(WebIcon16x16dir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(WebIcon16x16dir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(WebIcon16x16dir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(WebIcon16x16dir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(WebIcon16x16dir)" || exit $$?; \
-	done
-
-uninstall-WebIcon16x16DATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(WebIcon16x16_DATA)'; test -n "$(WebIcon16x16dir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(WebIcon16x16dir)'; $(am__uninstall_files_from_dir)
-install-WebIcon32x32DATA: $(WebIcon32x32_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(WebIcon32x32_DATA)'; test -n "$(WebIcon32x32dir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(WebIcon32x32dir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(WebIcon32x32dir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(WebIcon32x32dir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(WebIcon32x32dir)" || exit $$?; \
-	done
-
-uninstall-WebIcon32x32DATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(WebIcon32x32_DATA)'; test -n "$(WebIcon32x32dir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(WebIcon32x32dir)'; $(am__uninstall_files_from_dir)
-install-WebIcon48x48DATA: $(WebIcon48x48_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(WebIcon48x48_DATA)'; test -n "$(WebIcon48x48dir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(WebIcon48x48dir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(WebIcon48x48dir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(WebIcon48x48dir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(WebIcon48x48dir)" || exit $$?; \
-	done
-
-uninstall-WebIcon48x48DATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(WebIcon48x48_DATA)'; test -n "$(WebIcon48x48dir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(WebIcon48x48dir)'; $(am__uninstall_files_from_dir)
-install-WebPixmapDATA: $(WebPixmap_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(WebPixmap_DATA)'; test -n "$(WebPixmapdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(WebPixmapdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(WebPixmapdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(WebPixmapdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(WebPixmapdir)" || exit $$?; \
-	done
-
-uninstall-WebPixmapDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(WebPixmap_DATA)'; test -n "$(WebPixmapdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(WebPixmapdir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-distdir: $(BUILT_SOURCES)
-	$(MAKE) $(AM_MAKEFLAGS) distdir-am
-
-distdir-am: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(HelpHtmldir)" "$(DESTDIR)$(HelpHtmlTxtdir)" "$(DESTDIR)$(HelpHtmldivdir)" "$(DESTDIR)$(HelpHtmlimagesdir)" "$(DESTDIR)$(HelpHtmlimgdir)" "$(DESTDIR)$(HelpHtmlrootdir)" "$(DESTDIR)$(MetaInfodir)" "$(DESTDIR)$(VFolderEntrydir)" "$(DESTDIR)$(WebHtmldir)" "$(DESTDIR)$(WebHtmlimagesdir)" "$(DESTDIR)$(WebIcon16x16dir)" "$(DESTDIR)$(WebIcon32x32dir)" "$(DESTDIR)$(WebIcon48x48dir)" "$(DESTDIR)$(WebPixmapdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-$(am__rm_f) $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-HelpHtmlDATA install-HelpHtmlTxtDATA \
-	install-HelpHtmldivDATA install-HelpHtmlimagesDATA \
-	install-HelpHtmlimgDATA install-HelpHtmlrootDATA \
-	install-MetaInfoDATA install-VFolderEntryDATA \
-	install-WebHtmlDATA install-WebHtmlimagesDATA \
-	install-WebIcon16x16DATA install-WebIcon32x32DATA \
-	install-WebIcon48x48DATA install-WebPixmapDATA
-	@$(NORMAL_INSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-HelpHtmlDATA uninstall-HelpHtmlTxtDATA \
-	uninstall-HelpHtmldivDATA uninstall-HelpHtmlimagesDATA \
-	uninstall-HelpHtmlimgDATA uninstall-HelpHtmlrootDATA \
-	uninstall-MetaInfoDATA uninstall-VFolderEntryDATA \
-	uninstall-WebHtmlDATA uninstall-WebHtmlimagesDATA \
-	uninstall-WebIcon16x16DATA uninstall-WebIcon32x32DATA \
-	uninstall-WebIcon48x48DATA uninstall-WebPixmapDATA
-
-.MAKE: install-am install-data-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	cscopelist-am ctags-am distclean distclean-generic \
-	distclean-libtool distdir dvi dvi-am html html-am info info-am \
-	install install-HelpHtmlDATA install-HelpHtmlTxtDATA \
-	install-HelpHtmldivDATA install-HelpHtmlimagesDATA \
-	install-HelpHtmlimgDATA install-HelpHtmlrootDATA \
-	install-MetaInfoDATA install-VFolderEntryDATA \
-	install-WebHtmlDATA install-WebHtmlimagesDATA \
-	install-WebIcon16x16DATA install-WebIcon32x32DATA \
-	install-WebIcon48x48DATA install-WebPixmapDATA install-am \
-	install-data install-data-am install-data-hook install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags-am uninstall uninstall-HelpHtmlDATA \
-	uninstall-HelpHtmlTxtDATA uninstall-HelpHtmldivDATA \
-	uninstall-HelpHtmlimagesDATA uninstall-HelpHtmlimgDATA \
-	uninstall-HelpHtmlrootDATA uninstall-MetaInfoDATA \
-	uninstall-VFolderEntryDATA uninstall-WebHtmlDATA \
-	uninstall-WebHtmlimagesDATA uninstall-WebIcon16x16DATA \
-	uninstall-WebIcon32x32DATA uninstall-WebIcon48x48DATA \
-	uninstall-WebPixmapDATA uninstall-am
-
-.PRECIOUS: Makefile
-
-
-install-data-hook:
-	if test ! -L $(DESTDIR)$(prefix)/share/httrack/html ; then \
-		( cd $(DESTDIR)$(prefix)/share/httrack \
-			&& $(LN_S) $(htmldir) html \
-		) \
-	fi
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
-
-# Tell GNU make to disable its built-in pattern rules.
-%:: %,v
-%:: RCS/%,v
-%:: RCS/%
-%:: s.%
-%:: SCCS/s.%

install-sh

@@ -1,541 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2024-06-19.01; # UTC
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# 'make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-tab='	'
-nl='
-'
-IFS=" $tab$nl"
-
-# Set DOITPROG to "echo" to test this script.
-
-doit=${DOITPROG-}
-doit_exec=${doit:-exec}
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-# Create dirs (including intermediate dirs) using mode 755.
-# This is like GNU 'install' as of coreutils 8.32 (2020).
-mkdir_umask=22
-
-backupsuffix=
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
-stripcmd=
-
-src=
-dst=
-dir_arg=
-dst_arg=
-
-copy_on_change=false
-is_target_a_directory=possibly
-
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
-     --help     display this help and exit.
-     --version  display version info and exit.
-
-  -c            (ignored)
-  -C            install only if different (preserve data modification time)
-  -d            create directories instead of installing files.
-  -g GROUP      $chgrpprog installed files to GROUP.
-  -m MODE       $chmodprog installed files to MODE.
-  -o USER       $chownprog installed files to USER.
-  -p            pass -p to $cpprog.
-  -s            $stripprog installed files.
-  -S SUFFIX     attempt to back up existing files, with suffix SUFFIX.
-  -t DIRECTORY  install into DIRECTORY.
-  -T            report an error if DSTFILE is a directory.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
-  RMPROG STRIPPROG
-
-By default, rm is invoked with -f; when overridden with RMPROG,
-it's up to you to specify -f if you want it.
-
-If -S is not specified, no backups are attempted.
-
-Report bugs to <bug-automake@gnu.org>.
-GNU Automake home page: <https://www.gnu.org/software/automake/>.
-General help using GNU software: <https://www.gnu.org/gethelp/>."
-
-while test $# -ne 0; do
-  case $1 in
-    -c) ;;
-
-    -C) copy_on_change=true;;
-
-    -d) dir_arg=true;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-        shift;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) mode=$2
-        case $mode in
-          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
-            echo "$0: invalid mode: $mode" >&2
-            exit 1;;
-        esac
-        shift;;
-
-    -o) chowncmd="$chownprog $2"
-        shift;;
-
-    -p) cpprog="$cpprog -p";;
-
-    -s) stripcmd=$stripprog;;
-
-    -S) backupsuffix="$2"
-        shift;;
-
-    -t)
-        is_target_a_directory=always
-        dst_arg=$2
-        # Protect names problematic for 'test' and other utilities.
-        case $dst_arg in
-          -* | [=\(\)!]) dst_arg=./$dst_arg;;
-        esac
-        shift;;
-
-    -T) is_target_a_directory=never;;
-
-    --version) echo "$0 (GNU Automake) $scriptversion"; exit $?;;
-
-    --) shift
-        break;;
-
-    -*) echo "$0: invalid option: $1" >&2
-        exit 1;;
-
-    *)  break;;
-  esac
-  shift
-done
-
-# We allow the use of options -d and -T together, by making -d
-# take the precedence; this is for compatibility with GNU install.
-
-if test -n "$dir_arg"; then
-  if test -n "$dst_arg"; then
-    echo "$0: target directory not allowed when installing a directory." >&2
-    exit 1
-  fi
-fi
-
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $@.
-  for arg
-  do
-    if test -n "$dst_arg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dst_arg"
-      shift # fnord
-    fi
-    shift # arg
-    dst_arg=$arg
-    # Protect names problematic for 'test' and other utilities.
-    case $dst_arg in
-      -* | [=\(\)!]) dst_arg=./$dst_arg;;
-    esac
-  done
-fi
-
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call 'install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-if test -z "$dir_arg"; then
-  if test $# -gt 1 || test "$is_target_a_directory" = always; then
-    if test ! -d "$dst_arg"; then
-      echo "$0: $dst_arg: Is not a directory." >&2
-      exit 1
-    fi
-  fi
-fi
-
-if test -z "$dir_arg"; then
-  do_exit='(exit $ret); exit $ret'
-  trap "ret=129; $do_exit" 1
-  trap "ret=130; $do_exit" 2
-  trap "ret=141; $do_exit" 13
-  trap "ret=143; $do_exit" 15
-
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-
-    *[0-7])
-      if test -z "$stripcmd"; then
-        u_plus_rw=
-      else
-        u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-        u_plus_rw=
-      else
-        u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-
-for src
-do
-  # Protect names problematic for 'test' and other utilities.
-  case $src in
-    -* | [=\(\)!]) src=./$src;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-    # Don't chown directories that already exist.
-    if test $dstdir_status = 0; then
-      chowncmd=""
-    fi
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dst_arg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-    dst=$dst_arg
-
-    # If destination is a directory, append the input filename.
-    if test -d "$dst"; then
-      if test "$is_target_a_directory" = never; then
-        echo "$0: $dst_arg: Is a directory" >&2
-        exit 1
-      fi
-      dstdir=$dst
-      dstbase=`basename "$src"`
-      case $dst in
-	*/) dst=$dst$dstbase;;
-	*)  dst=$dst/$dstbase;;
-      esac
-      dstdir_status=0
-    else
-      dstdir=`dirname "$dst"`
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  case $dstdir in
-    */) dstdirslash=$dstdir;;
-    *)  dstdirslash=$dstdir/;;
-  esac
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-        # With -d, create the new directory with the user-specified mode.
-        # Otherwise, rely on $mkdir_umask.
-        if test -n "$dir_arg"; then
-          mkdir_mode=-m$mode
-        else
-          mkdir_mode=
-        fi
-
-        posix_mkdir=false
-	# The $RANDOM variable is not portable (e.g., dash).  Use it
-	# here however when possible just to lower collision chance.
-	tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-
-	trap '
-	  ret=$?
-	  rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
-	  exit $ret
-	' 0
-
-	# Because "mkdir -p" follows existing symlinks and we likely work
-	# directly in world-writable /tmp, make sure that the '$tmpdir'
-	# directory is successfully created first before we actually test
-	# 'mkdir -p'.
-	if (umask $mkdir_umask &&
-	    $mkdirprog $mkdir_mode "$tmpdir" &&
-	    exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
-	then
-	  if test -z "$dir_arg" || {
-	       # Check for POSIX incompatibility with -m.
-	       # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-	       # other-writable bit of parent directory when it shouldn't.
-	       # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-	       test_tmpdir="$tmpdir/a"
-	       ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
-	       case $ls_ld_tmpdir in
-		 d????-?r-*) different_mode=700;;
-		 d????-?--*) different_mode=755;;
-		 *) false;;
-	       esac &&
-	       $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
-		 ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
-		 test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-	       }
-	     }
-	  then posix_mkdir=:
-	  fi
-	  rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
-	else
-	  # Remove any dirs left behind by ancient mkdir implementations.
-	  rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
-	fi
-	trap '' 0;;
-    esac
-
-    if
-      $posix_mkdir && (
-        umask $mkdir_umask &&
-        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
-
-      # mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-
-      case $dstdir in
-        /*) prefix='/';;
-        [-=\(\)!]*) prefix='./';;
-        *)  prefix='';;
-      esac
-
-      oIFS=$IFS
-      IFS=/
-      set -f
-      set fnord $dstdir
-      shift
-      set +f
-      IFS=$oIFS
-
-      prefixes=
-
-      for d
-      do
-        test X"$d" = X && continue
-
-        prefix=$prefix$d
-        if test -d "$prefix"; then
-          prefixes=
-        else
-          if $posix_mkdir; then
-            (umask $mkdir_umask &&
-             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-            # Don't fail if two instances are running concurrently.
-            test -d "$prefix" || exit 1
-          else
-            case $prefix in
-              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-              *) qprefix=$prefix;;
-            esac
-            prefixes="$prefixes '$qprefix'"
-          fi
-        fi
-        prefix=$prefix/
-      done
-
-      if test -n "$prefixes"; then
-        # Don't fail if two instances are running concurrently.
-        (umask $mkdir_umask &&
-         eval "\$doit_exec \$mkdirprog $prefixes") ||
-          test -d "$dstdir" || exit 1
-        obsolete_mkdir_used=true
-      fi
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=${dstdirslash}_inst.$$_
-    rmtmp=${dstdirslash}_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    (umask $cp_umask &&
-     { test -z "$stripcmd" || {
-	 # Create $dsttmp read-write so that cp doesn't create it read-only,
-	 # which would cause strip to fail.
-	 if test -z "$doit"; then
-	   : >"$dsttmp" # No need to fork-exec 'touch'.
-	 else
-	   $doit touch "$dsttmp"
-	 fi
-       }
-     } &&
-     $doit_exec $cpprog "$src" "$dsttmp") &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
-    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
-    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # If -C, don't bother to copy if it wouldn't change the file.
-    if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
-       set -f &&
-       set X $old && old=:$2:$4:$5:$6 &&
-       set X $new && new=:$2:$4:$5:$6 &&
-       set +f &&
-       test "$old" = "$new" &&
-       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
-    then
-      rm -f "$dsttmp"
-    else
-      # If $backupsuffix is set, and the file being installed
-      # already exists, attempt a backup.  Don't worry if it fails,
-      # e.g., if mv doesn't support -f.
-      if test -n "$backupsuffix" && test -f "$dst"; then
-        $doit $mvcmd -f "$dst" "$dst$backupsuffix" 2>/dev/null
-      fi
-
-      # Rename the file to the real destination.
-      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
-      # The rename failed, perhaps because mv can't rename something else
-      # to itself, or perhaps because mv is so ancient that it does not
-      # support -f.
-      {
-        # Now remove or move aside any old file at destination location.
-        # We try this two ways since rm can't unlink itself on some
-        # systems and the destination file might be busy for other
-        # reasons.  In this case, the final cleanup might fail but the new
-        # file should still install successfully.
-        {
-          test ! -f "$dst" ||
-          $doit $rmcmd "$dst" 2>/dev/null ||
-          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-            { $doit $rmcmd "$rmtmp" 2>/dev/null; :; }
-          } ||
-          { echo "$0: cannot unlink or rename $dst" >&2
-            (exit 1); exit 1
-          }
-        } &&
-
-        # Now rename the file to the real destination.
-        $doit $mvcmd "$dsttmp" "$dst"
-      }
-    fi || exit 1
-
-    trap '' 0
-  fi
-done
-
-# Local variables:
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
-# End:

lang/Makefile.in

@@ -1,559 +0,0 @@
-# Makefile.in generated by automake 1.17 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2024 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-am__rm_f = rm -f $(am__rm_f_notfound)
-am__rm_rf = rm -rf $(am__rm_f_notfound)
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = lang
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/snprintf.m4 \
-	$(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-  || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-       $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
-  }
-am__installdirs = "$(DESTDIR)$(langdir)" "$(DESTDIR)$(langrootdir)"
-DATA = $(lang_DATA) $(langroot_DATA)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_CFLAGS = @AM_CFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BASH = @BASH@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CFLAGS_PIE = @CFLAGS_PIE@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPPFLAGS = @CPPFLAGS@
-CSCOPE = @CSCOPE@
-CTAGS = @CTAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CFLAGS = @DEFAULT_CFLAGS@
-DEFAULT_LDFLAGS = @DEFAULT_LDFLAGS@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DL_LIBS = @DL_LIBS@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-ETAGS = @ETAGS@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-FILECMD = @FILECMD@
-GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-HTTPS_SUPPORT = @HTTPS_SUPPORT@
-ICONV_LIBS = @ICONV_LIBS@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LDFLAGS_PIE = @LDFLAGS_PIE@
-LFS_FLAG = @LFS_FLAG@
-LIBC_FORCE_LINK = @LIBC_FORCE_LINK@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_CV_OBJDIR = @LT_CV_OBJDIR@
-LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-ONLINE_UNIT_TESTS = @ONLINE_UNIT_TESTS@
-OPENSSL_LIBS = @OPENSSL_LIBS@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SHLIBPATH_VAR = @SHLIBPATH_VAR@
-SOCKET_LIBS = @SOCKET_LIBS@
-STRIP = @STRIP@
-THREADS_CFLAGS = @THREADS_CFLAGS@
-THREADS_LIBS = @THREADS_LIBS@
-V6_FLAG = @V6_FLAG@
-VERSION = @VERSION@
-VERSION_INFO = @VERSION_INFO@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__rm_f_notfound = @am__rm_f_notfound@
-am__tar = @am__tar@
-am__untar = @am__untar@
-am__xargs_n = @am__xargs_n@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-runstatedir = @runstatedir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-langdir = $(datadir)/httrack/lang
-# Glob against $(srcdir): a bare "*.txt" is resolved against the build dir and
-# stays unexpanded (breaking "make") in an out-of-tree build.
-lang_DATA = $(srcdir)/*.txt
-langrootdir = $(datadir)/httrack
-langroot_DATA = ../lang.def ../lang.indexes
-EXTRA_DIST = $(lang_DATA) $(langroot_DATA)
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lang/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu lang/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-install-langDATA: $(lang_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(lang_DATA)'; test -n "$(langdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(langdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(langdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(langdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(langdir)" || exit $$?; \
-	done
-
-uninstall-langDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(lang_DATA)'; test -n "$(langdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(langdir)'; $(am__uninstall_files_from_dir)
-install-langrootDATA: $(langroot_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(langroot_DATA)'; test -n "$(langrootdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(langrootdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(langrootdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(langrootdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(langrootdir)" || exit $$?; \
-	done
-
-uninstall-langrootDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(langroot_DATA)'; test -n "$(langrootdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(langrootdir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-distdir: $(BUILT_SOURCES)
-	$(MAKE) $(AM_MAKEFLAGS) distdir-am
-
-distdir-am: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(langdir)" "$(DESTDIR)$(langrootdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-$(am__rm_f) $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-langDATA install-langrootDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-langDATA uninstall-langrootDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	cscopelist-am ctags-am distclean distclean-generic \
-	distclean-libtool distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-langDATA \
-	install-langrootDATA install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
-	uninstall-am uninstall-langDATA uninstall-langrootDATA
-
-.PRECIOUS: Makefile
-
-
-#dist-hook:
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
-
-# Tell GNU make to disable its built-in pattern rules.
-%:: %,v
-%:: RCS/%,v
-%:: RCS/%
-%:: s.%
-%:: SCCS/s.%

libtest/Makefile.in

@@ -1,908 +0,0 @@
-# Makefile.in generated by automake 1.17 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2024 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-am__rm_f = rm -f $(am__rm_f_notfound)
-am__rm_rf = rm -rf $(am__rm_f_notfound)
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = libtest
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/snprintf.m4 \
-	$(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-  || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-       $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
-  }
-am__installdirs = "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(exemplesdir)"
-LTLIBRARIES = $(pkglib_LTLIBRARIES)
-am__DEPENDENCIES_1 =
-libbaselinks_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
-	$(am__DEPENDENCIES_1) $(top_builddir)/src/libhttrack.la
-am_libbaselinks_la_OBJECTS = callbacks-example-baselinks.lo
-libbaselinks_la_OBJECTS = $(am_libbaselinks_la_OBJECTS)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 = 
-libbaselinks_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
-	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
-	$(AM_CFLAGS) $(CFLAGS) $(libbaselinks_la_LDFLAGS) $(LDFLAGS) \
-	-o $@
-libchangecontent_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
-	$(am__DEPENDENCIES_1) $(top_builddir)/src/libhttrack.la
-am_libchangecontent_la_OBJECTS = callbacks-example-changecontent.lo
-libchangecontent_la_OBJECTS = $(am_libchangecontent_la_OBJECTS)
-libchangecontent_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
-	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
-	$(AM_CFLAGS) $(CFLAGS) $(libchangecontent_la_LDFLAGS) \
-	$(LDFLAGS) -o $@
-libcontentfilter_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
-	$(am__DEPENDENCIES_1) $(top_builddir)/src/libhttrack.la
-am_libcontentfilter_la_OBJECTS = callbacks-example-contentfilter.lo
-libcontentfilter_la_OBJECTS = $(am_libcontentfilter_la_OBJECTS)
-libcontentfilter_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
-	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
-	$(AM_CFLAGS) $(CFLAGS) $(libcontentfilter_la_LDFLAGS) \
-	$(LDFLAGS) -o $@
-libdisplayheader_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
-	$(am__DEPENDENCIES_1) $(top_builddir)/src/libhttrack.la
-am_libdisplayheader_la_OBJECTS = callbacks-example-displayheader.lo
-libdisplayheader_la_OBJECTS = $(am_libdisplayheader_la_OBJECTS)
-libdisplayheader_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
-	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
-	$(AM_CFLAGS) $(CFLAGS) $(libdisplayheader_la_LDFLAGS) \
-	$(LDFLAGS) -o $@
-libfilename_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
-	$(am__DEPENDENCIES_1) $(top_builddir)/src/libhttrack.la
-am_libfilename_la_OBJECTS = callbacks-example-filename.lo
-libfilename_la_OBJECTS = $(am_libfilename_la_OBJECTS)
-libfilename_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
-	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
-	$(AM_CFLAGS) $(CFLAGS) $(libfilename_la_LDFLAGS) $(LDFLAGS) -o \
-	$@
-libfilename2_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
-	$(am__DEPENDENCIES_1) $(top_builddir)/src/libhttrack.la
-am_libfilename2_la_OBJECTS = callbacks-example-filename2.lo
-libfilename2_la_OBJECTS = $(am_libfilename2_la_OBJECTS)
-libfilename2_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
-	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
-	$(AM_CFLAGS) $(CFLAGS) $(libfilename2_la_LDFLAGS) $(LDFLAGS) \
-	-o $@
-libfilenameiisbug_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
-	$(am__DEPENDENCIES_1) $(top_builddir)/src/libhttrack.la
-am_libfilenameiisbug_la_OBJECTS = callbacks-example-filenameiisbug.lo
-libfilenameiisbug_la_OBJECTS = $(am_libfilenameiisbug_la_OBJECTS)
-libfilenameiisbug_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
-	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
-	$(AM_CFLAGS) $(CFLAGS) $(libfilenameiisbug_la_LDFLAGS) \
-	$(LDFLAGS) -o $@
-liblistlinks_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
-	$(am__DEPENDENCIES_1) $(top_builddir)/src/libhttrack.la
-am_liblistlinks_la_OBJECTS = callbacks-example-listlinks.lo
-liblistlinks_la_OBJECTS = $(am_liblistlinks_la_OBJECTS)
-liblistlinks_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
-	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
-	$(AM_CFLAGS) $(CFLAGS) $(liblistlinks_la_LDFLAGS) $(LDFLAGS) \
-	-o $@
-liblog_la_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
-	$(top_builddir)/src/libhttrack.la
-am_liblog_la_OBJECTS = callbacks-example-log.lo
-liblog_la_OBJECTS = $(am_liblog_la_OBJECTS)
-liblog_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(liblog_la_LDFLAGS) $(LDFLAGS) -o $@
-libsimple_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
-	$(am__DEPENDENCIES_1) $(top_builddir)/src/libhttrack.la
-am_libsimple_la_OBJECTS = callbacks-example-simple.lo
-libsimple_la_OBJECTS = $(am_libsimple_la_OBJECTS)
-libsimple_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libsimple_la_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__maybe_remake_depfiles = depfiles
-am__depfiles_remade = ./$(DEPDIR)/callbacks-example-baselinks.Plo \
-	./$(DEPDIR)/callbacks-example-changecontent.Plo \
-	./$(DEPDIR)/callbacks-example-contentfilter.Plo \
-	./$(DEPDIR)/callbacks-example-displayheader.Plo \
-	./$(DEPDIR)/callbacks-example-filename.Plo \
-	./$(DEPDIR)/callbacks-example-filename2.Plo \
-	./$(DEPDIR)/callbacks-example-filenameiisbug.Plo \
-	./$(DEPDIR)/callbacks-example-listlinks.Plo \
-	./$(DEPDIR)/callbacks-example-log.Plo \
-	./$(DEPDIR)/callbacks-example-simple.Plo
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC      " $@;
-am__v_CC_1 = 
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD    " $@;
-am__v_CCLD_1 = 
-SOURCES = $(libbaselinks_la_SOURCES) $(libchangecontent_la_SOURCES) \
-	$(libcontentfilter_la_SOURCES) $(libdisplayheader_la_SOURCES) \
-	$(libfilename_la_SOURCES) $(libfilename2_la_SOURCES) \
-	$(libfilenameiisbug_la_SOURCES) $(liblistlinks_la_SOURCES) \
-	$(liblog_la_SOURCES) $(libsimple_la_SOURCES)
-DIST_SOURCES = $(libbaselinks_la_SOURCES) \
-	$(libchangecontent_la_SOURCES) $(libcontentfilter_la_SOURCES) \
-	$(libdisplayheader_la_SOURCES) $(libfilename_la_SOURCES) \
-	$(libfilename2_la_SOURCES) $(libfilenameiisbug_la_SOURCES) \
-	$(liblistlinks_la_SOURCES) $(liblog_la_SOURCES) \
-	$(libsimple_la_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-DATA = $(exemples_DATA)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_CFLAGS = @AM_CFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BASH = @BASH@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CFLAGS_PIE = @CFLAGS_PIE@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPPFLAGS = @CPPFLAGS@
-CSCOPE = @CSCOPE@
-CTAGS = @CTAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CFLAGS = @DEFAULT_CFLAGS@
-DEFAULT_LDFLAGS = @DEFAULT_LDFLAGS@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DL_LIBS = @DL_LIBS@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-ETAGS = @ETAGS@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-FILECMD = @FILECMD@
-GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-HTTPS_SUPPORT = @HTTPS_SUPPORT@
-ICONV_LIBS = @ICONV_LIBS@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LDFLAGS_PIE = @LDFLAGS_PIE@
-LFS_FLAG = @LFS_FLAG@
-LIBC_FORCE_LINK = @LIBC_FORCE_LINK@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_CV_OBJDIR = @LT_CV_OBJDIR@
-LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-ONLINE_UNIT_TESTS = @ONLINE_UNIT_TESTS@
-OPENSSL_LIBS = @OPENSSL_LIBS@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SHLIBPATH_VAR = @SHLIBPATH_VAR@
-SOCKET_LIBS = @SOCKET_LIBS@
-STRIP = @STRIP@
-THREADS_CFLAGS = @THREADS_CFLAGS@
-THREADS_LIBS = @THREADS_LIBS@
-V6_FLAG = @V6_FLAG@
-VERSION = @VERSION@
-VERSION_INFO = @VERSION_INFO@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__rm_f_notfound = @am__rm_f_notfound@
-am__tar = @am__tar@
-am__untar = @am__untar@
-am__xargs_n = @am__xargs_n@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-runstatedir = @runstatedir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-exemplesdir = $(datadir)/httrack/libtest
-# Glob against $(srcdir), not the build dir: a bare "*.c" is resolved relative to
-# the build dir and stays unexpanded (breaking "make") in an out-of-tree build.
-exemples_DATA = $(srcdir)/*.c $(srcdir)/*.h $(srcdir)/*.txt
-EXTRA_DIST = $(exemples_DATA) libtest.mak libtest.vcproj
-# Use $(top_srcdir)/src, not ../src: the latter is relative to the build dir and
-# misses the source headers (e.g. httrack-library.h) in an out-of-tree build.
-AM_CPPFLAGS = @DEFAULT_CFLAGS@ @THREADS_CFLAGS@ @V6_FLAG@ @LFS_FLAG@ \
-	-DPREFIX=\""$(prefix)"\" -DSYSCONFDIR=\""$(sysconfdir)"\" \
-	-DDATADIR=\""$(datadir)"\" -DLIBDIR=\""$(libdir)"\" \
-	-I$(top_srcdir)/src
-
-# The callback examples reference libc only through libhttrack, so the direct
-# libc edge gets dropped from DT_NEEDED (library-not-linked-against-libc).
-# Force libc back; configure gates the flag since only a GNU-style linker
-# accepts it (LIBC_FORCE_LINK is empty on e.g. macOS).
-AM_LDFLAGS = \
-	@DEFAULT_LDFLAGS@ \
-	-L../src \
-	@LIBC_FORCE_LINK@
-
-
-# Examples
-libbaselinks_la_SOURCES = callbacks-example-baselinks.c
-libbaselinks_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libbaselinks_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
-libchangecontent_la_SOURCES = callbacks-example-changecontent.c
-libchangecontent_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libchangecontent_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
-libcontentfilter_la_SOURCES = callbacks-example-contentfilter.c
-libcontentfilter_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libcontentfilter_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
-libdisplayheader_la_SOURCES = callbacks-example-displayheader.c
-libdisplayheader_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libdisplayheader_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
-libfilename2_la_SOURCES = callbacks-example-filename2.c
-libfilename2_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libfilename2_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
-libfilename_la_SOURCES = callbacks-example-filename.c
-libfilename_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libfilename_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
-libfilenameiisbug_la_SOURCES = callbacks-example-filenameiisbug.c
-libfilenameiisbug_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libfilenameiisbug_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
-liblistlinks_la_SOURCES = callbacks-example-listlinks.c
-liblistlinks_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-liblistlinks_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
-liblog_la_SOURCES = callbacks-example-log.c
-liblog_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-liblog_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
-libsimple_la_SOURCES = callbacks-example-simple.c
-libsimple_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libsimple_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
-pkglib_LTLIBRARIES = libbaselinks.la libchangecontent.la libcontentfilter.la libdisplayheader.la libfilename2.la libfilename.la libfilenameiisbug.la liblistlinks.la liblog.la libsimple.la
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu libtest/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu libtest/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	@list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \
-	list2=; for p in $$list; do \
-	  if test -f $$p; then \
-	    list2="$$list2 $$p"; \
-	  else :; fi; \
-	done; \
-	test -z "$$list2" || { \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pkglibdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pkglibdir)" || exit 1; \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(pkglibdir)'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(pkglibdir)"; \
-	}
-
-uninstall-pkglibLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \
-	done
-
-clean-pkglibLTLIBRARIES:
-	-$(am__rm_f) $(pkglib_LTLIBRARIES)
-	@list='$(pkglib_LTLIBRARIES)'; \
-	locs=`for p in $$list; do echo $$p; done | \
-	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
-	      sort -u`; \
-	echo rm -f $${locs}; \
-	$(am__rm_f) $${locs}
-
-libbaselinks.la: $(libbaselinks_la_OBJECTS) $(libbaselinks_la_DEPENDENCIES) $(EXTRA_libbaselinks_la_DEPENDENCIES) 
-	$(AM_V_CCLD)$(libbaselinks_la_LINK) -rpath $(pkglibdir) $(libbaselinks_la_OBJECTS) $(libbaselinks_la_LIBADD) $(LIBS)
-
-libchangecontent.la: $(libchangecontent_la_OBJECTS) $(libchangecontent_la_DEPENDENCIES) $(EXTRA_libchangecontent_la_DEPENDENCIES) 
-	$(AM_V_CCLD)$(libchangecontent_la_LINK) -rpath $(pkglibdir) $(libchangecontent_la_OBJECTS) $(libchangecontent_la_LIBADD) $(LIBS)
-
-libcontentfilter.la: $(libcontentfilter_la_OBJECTS) $(libcontentfilter_la_DEPENDENCIES) $(EXTRA_libcontentfilter_la_DEPENDENCIES) 
-	$(AM_V_CCLD)$(libcontentfilter_la_LINK) -rpath $(pkglibdir) $(libcontentfilter_la_OBJECTS) $(libcontentfilter_la_LIBADD) $(LIBS)
-
-libdisplayheader.la: $(libdisplayheader_la_OBJECTS) $(libdisplayheader_la_DEPENDENCIES) $(EXTRA_libdisplayheader_la_DEPENDENCIES) 
-	$(AM_V_CCLD)$(libdisplayheader_la_LINK) -rpath $(pkglibdir) $(libdisplayheader_la_OBJECTS) $(libdisplayheader_la_LIBADD) $(LIBS)
-
-libfilename.la: $(libfilename_la_OBJECTS) $(libfilename_la_DEPENDENCIES) $(EXTRA_libfilename_la_DEPENDENCIES) 
-	$(AM_V_CCLD)$(libfilename_la_LINK) -rpath $(pkglibdir) $(libfilename_la_OBJECTS) $(libfilename_la_LIBADD) $(LIBS)
-
-libfilename2.la: $(libfilename2_la_OBJECTS) $(libfilename2_la_DEPENDENCIES) $(EXTRA_libfilename2_la_DEPENDENCIES) 
-	$(AM_V_CCLD)$(libfilename2_la_LINK) -rpath $(pkglibdir) $(libfilename2_la_OBJECTS) $(libfilename2_la_LIBADD) $(LIBS)
-
-libfilenameiisbug.la: $(libfilenameiisbug_la_OBJECTS) $(libfilenameiisbug_la_DEPENDENCIES) $(EXTRA_libfilenameiisbug_la_DEPENDENCIES) 
-	$(AM_V_CCLD)$(libfilenameiisbug_la_LINK) -rpath $(pkglibdir) $(libfilenameiisbug_la_OBJECTS) $(libfilenameiisbug_la_LIBADD) $(LIBS)
-
-liblistlinks.la: $(liblistlinks_la_OBJECTS) $(liblistlinks_la_DEPENDENCIES) $(EXTRA_liblistlinks_la_DEPENDENCIES) 
-	$(AM_V_CCLD)$(liblistlinks_la_LINK) -rpath $(pkglibdir) $(liblistlinks_la_OBJECTS) $(liblistlinks_la_LIBADD) $(LIBS)
-
-liblog.la: $(liblog_la_OBJECTS) $(liblog_la_DEPENDENCIES) $(EXTRA_liblog_la_DEPENDENCIES) 
-	$(AM_V_CCLD)$(liblog_la_LINK) -rpath $(pkglibdir) $(liblog_la_OBJECTS) $(liblog_la_LIBADD) $(LIBS)
-
-libsimple.la: $(libsimple_la_OBJECTS) $(libsimple_la_DEPENDENCIES) $(EXTRA_libsimple_la_DEPENDENCIES) 
-	$(AM_V_CCLD)$(libsimple_la_LINK) -rpath $(pkglibdir) $(libsimple_la_OBJECTS) $(libsimple_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-baselinks.Plo@am__quote@ # am--include-marker
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-changecontent.Plo@am__quote@ # am--include-marker
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-contentfilter.Plo@am__quote@ # am--include-marker
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-displayheader.Plo@am__quote@ # am--include-marker
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-filename.Plo@am__quote@ # am--include-marker
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-filename2.Plo@am__quote@ # am--include-marker
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-filenameiisbug.Plo@am__quote@ # am--include-marker
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-listlinks.Plo@am__quote@ # am--include-marker
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-log.Plo@am__quote@ # am--include-marker
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-simple.Plo@am__quote@ # am--include-marker
-
-$(am__depfiles_remade):
-	@$(MKDIR_P) $(@D)
-	@: >>$@
-
-am--depfiles: $(am__depfiles_remade)
-
-.c.o:
-@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
-@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
-@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
-@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
-@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-install-exemplesDATA: $(exemples_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(exemples_DATA)'; test -n "$(exemplesdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(exemplesdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(exemplesdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(exemplesdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(exemplesdir)" || exit $$?; \
-	done
-
-uninstall-exemplesDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(exemples_DATA)'; test -n "$(exemplesdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(exemplesdir)'; $(am__uninstall_files_from_dir)
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-distdir: $(BUILT_SOURCES)
-	$(MAKE) $(AM_MAKEFLAGS) distdir-am
-
-distdir-am: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(exemplesdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-$(am__rm_f) $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-pkglibLTLIBRARIES \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -f ./$(DEPDIR)/callbacks-example-baselinks.Plo
-	-rm -f ./$(DEPDIR)/callbacks-example-changecontent.Plo
-	-rm -f ./$(DEPDIR)/callbacks-example-contentfilter.Plo
-	-rm -f ./$(DEPDIR)/callbacks-example-displayheader.Plo
-	-rm -f ./$(DEPDIR)/callbacks-example-filename.Plo
-	-rm -f ./$(DEPDIR)/callbacks-example-filename2.Plo
-	-rm -f ./$(DEPDIR)/callbacks-example-filenameiisbug.Plo
-	-rm -f ./$(DEPDIR)/callbacks-example-listlinks.Plo
-	-rm -f ./$(DEPDIR)/callbacks-example-log.Plo
-	-rm -f ./$(DEPDIR)/callbacks-example-simple.Plo
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-exemplesDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-pkglibLTLIBRARIES
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f ./$(DEPDIR)/callbacks-example-baselinks.Plo
-	-rm -f ./$(DEPDIR)/callbacks-example-changecontent.Plo
-	-rm -f ./$(DEPDIR)/callbacks-example-contentfilter.Plo
-	-rm -f ./$(DEPDIR)/callbacks-example-displayheader.Plo
-	-rm -f ./$(DEPDIR)/callbacks-example-filename.Plo
-	-rm -f ./$(DEPDIR)/callbacks-example-filename2.Plo
-	-rm -f ./$(DEPDIR)/callbacks-example-filenameiisbug.Plo
-	-rm -f ./$(DEPDIR)/callbacks-example-listlinks.Plo
-	-rm -f ./$(DEPDIR)/callbacks-example-log.Plo
-	-rm -f ./$(DEPDIR)/callbacks-example-simple.Plo
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-exemplesDATA uninstall-pkglibLTLIBRARIES
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
-	clean-generic clean-libtool clean-pkglibLTLIBRARIES \
-	cscopelist-am ctags ctags-am distclean distclean-compile \
-	distclean-generic distclean-libtool distclean-tags distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-exemplesDATA install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-pkglibLTLIBRARIES \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags tags-am uninstall uninstall-am uninstall-exemplesDATA \
-	uninstall-pkglibLTLIBRARIES
-
-.PRECIOUS: Makefile
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
-
-# Tell GNU make to disable its built-in pattern rules.
-%:: %,v
-%:: RCS/%,v
-%:: RCS/%
-%:: s.%
-%:: SCCS/s.%

m4/Makefile.in

@@ -1,479 +0,0 @@
-# Makefile.in generated by automake 1.17 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2024 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-am__rm_f = rm -f $(am__rm_f_notfound)
-am__rm_rf = rm -rf $(am__rm_f_notfound)
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = m4
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/snprintf.m4 \
-	$(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_CFLAGS = @AM_CFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BASH = @BASH@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CFLAGS_PIE = @CFLAGS_PIE@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPPFLAGS = @CPPFLAGS@
-CSCOPE = @CSCOPE@
-CTAGS = @CTAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CFLAGS = @DEFAULT_CFLAGS@
-DEFAULT_LDFLAGS = @DEFAULT_LDFLAGS@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DL_LIBS = @DL_LIBS@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-ETAGS = @ETAGS@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-FILECMD = @FILECMD@
-GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-HTTPS_SUPPORT = @HTTPS_SUPPORT@
-ICONV_LIBS = @ICONV_LIBS@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LDFLAGS_PIE = @LDFLAGS_PIE@
-LFS_FLAG = @LFS_FLAG@
-LIBC_FORCE_LINK = @LIBC_FORCE_LINK@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_CV_OBJDIR = @LT_CV_OBJDIR@
-LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-ONLINE_UNIT_TESTS = @ONLINE_UNIT_TESTS@
-OPENSSL_LIBS = @OPENSSL_LIBS@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SHLIBPATH_VAR = @SHLIBPATH_VAR@
-SOCKET_LIBS = @SOCKET_LIBS@
-STRIP = @STRIP@
-THREADS_CFLAGS = @THREADS_CFLAGS@
-THREADS_LIBS = @THREADS_LIBS@
-V6_FLAG = @V6_FLAG@
-VERSION = @VERSION@
-VERSION_INFO = @VERSION_INFO@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__rm_f_notfound = @am__rm_f_notfound@
-am__tar = @am__tar@
-am__untar = @am__untar@
-am__xargs_n = @am__xargs_n@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-runstatedir = @runstatedir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Glob against $(srcdir) so "make dist" works out-of-tree (a bare "*.m4" is
-# resolved against the build dir, where there are no sources).
-EXTRA_DIST = $(srcdir)/*.m4
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu m4/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu m4/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-distdir: $(BUILT_SOURCES)
-	$(MAKE) $(AM_MAKEFLAGS) distdir-am
-
-distdir-am: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-$(am__rm_f) $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	cscopelist-am ctags-am distclean distclean-generic \
-	distclean-libtool distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags-am uninstall uninstall-am
-
-.PRECIOUS: Makefile
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
-
-# Tell GNU make to disable its built-in pattern rules.
-%:: %,v
-%:: RCS/%,v
-%:: RCS/%
-%:: s.%
-%:: SCCS/s.%

man/Makefile.in

@@ -1,574 +0,0 @@
-# Makefile.in generated by automake 1.17 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2024 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-am__rm_f = rm -f $(am__rm_f_notfound)
-am__rm_rf = rm -rf $(am__rm_f_notfound)
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = man
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/snprintf.m4 \
-	$(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-  || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-       $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
-  }
-man1dir = $(mandir)/man1
-am__installdirs = "$(DESTDIR)$(man1dir)"
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_CFLAGS = @AM_CFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BASH = @BASH@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CFLAGS_PIE = @CFLAGS_PIE@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPPFLAGS = @CPPFLAGS@
-CSCOPE = @CSCOPE@
-CTAGS = @CTAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CFLAGS = @DEFAULT_CFLAGS@
-DEFAULT_LDFLAGS = @DEFAULT_LDFLAGS@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DL_LIBS = @DL_LIBS@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-ETAGS = @ETAGS@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-FILECMD = @FILECMD@
-GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-HTTPS_SUPPORT = @HTTPS_SUPPORT@
-ICONV_LIBS = @ICONV_LIBS@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LDFLAGS_PIE = @LDFLAGS_PIE@
-LFS_FLAG = @LFS_FLAG@
-LIBC_FORCE_LINK = @LIBC_FORCE_LINK@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_CV_OBJDIR = @LT_CV_OBJDIR@
-LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-ONLINE_UNIT_TESTS = @ONLINE_UNIT_TESTS@
-OPENSSL_LIBS = @OPENSSL_LIBS@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SHLIBPATH_VAR = @SHLIBPATH_VAR@
-SOCKET_LIBS = @SOCKET_LIBS@
-STRIP = @STRIP@
-THREADS_CFLAGS = @THREADS_CFLAGS@
-THREADS_LIBS = @THREADS_LIBS@
-V6_FLAG = @V6_FLAG@
-VERSION = @VERSION@
-VERSION_INFO = @VERSION_INFO@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__rm_f_notfound = @am__rm_f_notfound@
-am__tar = @am__tar@
-am__untar = @am__untar@
-am__xargs_n = @am__xargs_n@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-runstatedir = @runstatedir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# man_MANS = httrack.1
-man_MANS = httrack.1 webhttrack.1 htsserver.1 proxytrack.1
-EXTRA_DIST = $(man_MANS) makeman.sh
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu man/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-install-man1: $(man_MANS)
-	@$(NORMAL_INSTALL)
-	@list1=''; \
-	list2='$(man_MANS)'; \
-	test -n "$(man1dir)" \
-	  && test -n "`echo $$list1$$list2`" \
-	  || exit 0; \
-	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
-	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
-	{ for i in $$list1; do echo "$$i"; done;  \
-	if test -n "$$list2"; then \
-	  for i in $$list2; do echo "$$i"; done \
-	    | sed -n '/\.1[a-z]*$$/p'; \
-	fi; \
-	} | while read p; do \
-	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; echo "$$p"; \
-	done | \
-	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
-	sed 'N;N;s,\n, ,g' | { \
-	list=; while read file base inst; do \
-	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
-	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
-	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
-	  fi; \
-	done; \
-	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
-	while read files; do \
-	  test -z "$$files" || { \
-	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
-	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
-	done; }
-
-uninstall-man1:
-	@$(NORMAL_UNINSTALL)
-	@list=''; test -n "$(man1dir)" || exit 0; \
-	files=`{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.1[a-z]*$$/p'; \
-	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
-	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-distdir: $(BUILT_SOURCES)
-	$(MAKE) $(AM_MAKEFLAGS) distdir-am
-
-distdir-am: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(MANS)
-installdirs:
-	for dir in "$(DESTDIR)$(man1dir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-$(am__rm_f) $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	cscopelist-am ctags-am distclean distclean-generic \
-	distclean-libtool distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-man1 install-pdf install-pdf-am install-ps \
-	install-ps-am install-strip installcheck installcheck-am \
-	installdirs maintainer-clean maintainer-clean-generic \
-	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
-	ps ps-am tags-am uninstall uninstall-am uninstall-man \
-	uninstall-man1
-
-.PRECIOUS: Makefile
-
-
-# Regenerate httrack.1 from the "httrack --help" output and the top-level
-# README. Run by hand after changing options or help text:
-#   make -C man regen-man
-# The generated page is committed; this target only refreshes it. Honors
-# SOURCE_DATE_EPOCH for a reproducible date.
-regen-man: makeman.sh $(top_builddir)/src/httrack$(EXEEXT)
-	README='$(top_srcdir)/README' $(SHELL) $(srcdir)/makeman.sh \
-		'$(top_builddir)/src/httrack$(EXEEXT)' > $(srcdir)/httrack.1
-.PHONY: regen-man
-
-# Render html/httrack.man.html from httrack.1. Needs the groff html device
-# (Debian: full "groff" package, not "groff-base"). Run by hand: make -C man regen-man-html
-regen-man-html: httrack.1
-	groff -t -man -Thtml $(srcdir)/httrack.1 > $(top_srcdir)/html/httrack.man.html
-.PHONY: regen-man-html
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
-
-# Tell GNU make to disable its built-in pattern rules.
-%:: %,v
-%:: RCS/%,v
-%:: RCS/%
-%:: s.%
-%:: SCCS/s.%

missing

@@ -1,236 +0,0 @@
-#! /bin/sh
-# Common wrapper for a few potentially missing GNU and other programs.
-
-scriptversion=2024-06-07.14; # UTC
-
-# shellcheck disable=SC2006,SC2268 # we must support pre-POSIX shells
-
-# Copyright (C) 1996-2024 Free Software Foundation, Inc.
-# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try '$0 --help' for more information"
-  exit 1
-fi
-
-case $1 in
-
-  --is-lightweight)
-    # Used by our autoconf macros to check whether the available missing
-    # script is modern enough.
-    exit 0
-    ;;
-
-  --run)
-    # Back-compat with the calling convention used by older automake.
-    shift
-    ;;
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
-to PROGRAM being missing or too old.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-
-Supported PROGRAM values:
-aclocal autoconf autogen  autoheader autom4te automake autoreconf
-bison   flex     help2man lex        makeinfo perl     yacc
-
-Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
-'g' are ignored when checking the name.
-
-Report bugs to <bug-automake@gnu.org>.
-GNU Automake home page: <https://www.gnu.org/software/automake/>.
-General help using GNU software: <https://www.gnu.org/gethelp/>."
-    exit $?
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing (GNU Automake) $scriptversion"
-    exit $?
-    ;;
-
-  -*)
-    echo 1>&2 "$0: unknown '$1' option"
-    echo 1>&2 "Try '$0 --help' for more information"
-    exit 1
-    ;;
-
-esac
-
-# Run the given program, remember its exit status.
-"$@"; st=$?
-
-# If it succeeded, we are done.
-test $st -eq 0 && exit 0
-
-# Also exit now if we it failed (or wasn't found), and '--version' was
-# passed; such an option is passed most likely to detect whether the
-# program is present and works.
-case $2 in --version|--help) exit $st;; esac
-
-# Exit code 63 means version mismatch.  This often happens when the user
-# tries to use an ancient version of a tool on a file that requires a
-# minimum version.
-if test $st -eq 63; then
-  msg="probably too old"
-elif test $st -eq 127; then
-  # Program was missing.
-  msg="missing on your system"
-else
-  # Program was found and executed, but failed.  Give up.
-  exit $st
-fi
-
-perl_URL=https://www.perl.org/
-flex_URL=https://github.com/westes/flex
-gnu_software_URL=https://www.gnu.org/software
-
-program_details ()
-{
-  case $1 in
-    aclocal|automake|autoreconf)
-      echo "The '$1' program is part of the GNU Automake package:"
-      echo "<$gnu_software_URL/automake>"
-      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
-      echo "<$gnu_software_URL/autoconf>"
-      echo "<$gnu_software_URL/m4/>"
-      echo "<$perl_URL>"
-      ;;
-    autoconf|autom4te|autoheader)
-      echo "The '$1' program is part of the GNU Autoconf package:"
-      echo "<$gnu_software_URL/autoconf/>"
-      echo "It also requires GNU m4 and Perl in order to run:"
-      echo "<$gnu_software_URL/m4/>"
-      echo "<$perl_URL>"
-      ;;
-    *)
-      :
-      ;;
-  esac
-}
-
-give_advice ()
-{
-  # Normalize program name to check for.
-  normalized_program=`echo "$1" | sed '
-    s/^gnu-//; t
-    s/^gnu//; t
-    s/^g//; t'`
-
-  printf '%s\n' "'$1' is $msg."
-
-  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
-  autoheader_deps="'acconfig.h'"
-  automake_deps="'Makefile.am'"
-  aclocal_deps="'acinclude.m4'"
-  case $normalized_program in
-    aclocal*)
-      echo "You should only need it if you modified $aclocal_deps or"
-      echo "$configure_deps."
-      ;;
-    autoconf*)
-      echo "You should only need it if you modified $configure_deps."
-      ;;
-    autogen*)
-      echo "You should only need it if you modified a '.def' or '.tpl' file."
-      echo "You may want to install the GNU AutoGen package:"
-      echo "<$gnu_software_URL/autogen/>"
-      ;;
-    autoheader*)
-      echo "You should only need it if you modified $autoheader_deps or"
-      echo "$configure_deps."
-      ;;
-    automake*)
-      echo "You should only need it if you modified $automake_deps or"
-      echo "$configure_deps."
-      ;;
-    autom4te*)
-      echo "You might have modified some maintainer files that require"
-      echo "the 'autom4te' program to be rebuilt."
-      ;;
-    autoreconf*)
-      echo "You should only need it if you modified $aclocal_deps or"
-      echo "$automake_deps or $autoheader_deps or $automake_deps or"
-      echo "$configure_deps."
-      ;;
-    bison*|yacc*)
-      echo "You should only need it if you modified a '.y' file."
-      echo "You may want to install the GNU Bison package:"
-      echo "<$gnu_software_URL/bison/>"
-      ;;
-    help2man*)
-      echo "You should only need it if you modified a dependency" \
-           "of a man page."
-      echo "You may want to install the GNU Help2man package:"
-      echo "<$gnu_software_URL/help2man/>"
-    ;;
-    lex*|flex*)
-      echo "You should only need it if you modified a '.l' file."
-      echo "You may want to install the Fast Lexical Analyzer package:"
-      echo "<$flex_URL>"
-      ;;
-    makeinfo*)
-      echo "You should only need it if you modified a '.texi' file, or"
-      echo "any other file indirectly affecting the aspect of the manual."
-      echo "You might want to install the Texinfo package:"
-      echo "<$gnu_software_URL/texinfo/>"
-      echo "The spurious makeinfo call might also be the consequence of"
-      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
-      echo "want to install GNU make:"
-      echo "<$gnu_software_URL/make/>"
-      ;;
-    perl*)
-      echo "You should only need it to run GNU Autoconf, GNU Automake, "
-      echo "  assorted other tools, or if you modified a Perl source file."
-      echo "You may want to install the Perl 5 language interpreter:"
-      echo "<$perl_URL>"
-      ;;
-    *)
-      echo "You might have modified some files without having the proper"
-      echo "tools for further handling them.  Check the 'README' file, it"
-      echo "often tells you about the needed prerequisites for installing"
-      echo "this package.  You may also peek at any GNU archive site, in"
-      echo "case some other package contains this missing '$1' program."
-      ;;
-  esac
-  program_details "$normalized_program"
-}
-
-give_advice "$1" | sed -e '1s/^/WARNING: /' \
-                       -e '2,$s/^/         /' >&2
-
-# Propagate the correct exit status (expected to be 127 for a program
-# not found, 63 for a program that failed due to version mismatch).
-exit $st
-
-# Local variables:
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
-# End:

src/htsalias.c

@@ -41,25 +41,6 @@ Please visit our Website: http://www.httrack.com
 
 #define _NOT_NULL(a) ( (a!=NULL) ? (a) : "" )
 
-// COPY OF cmdl_ins in htscoremain.c
-/* Bytes left in x_argvblk from offset ptr. The offset can in principle outrun
-   the block (alias/doit.log expansion), so the copy aborts cleanly instead of
-   the subtraction wrapping to a huge unbounded size. */
-#define cmdl_room(bufsize, ptr)                                                \
-  ((ptr) < (size_t) (bufsize) ? (size_t) (bufsize) - (ptr) : 0)
-// Insert a command in the argc/argv (buff has total capacity bufsize)
-#define cmdl_ins(token, argc, argv, buff, bufsize, ptr)                        \
-  {                                                                            \
-    int i;                                                                     \
-    for (i = argc; i > 0; i--)                                                 \
-      argv[i] = argv[i - 1];                                                   \
-  }                                                                            \
-  argv[0] = (buff + ptr);                                                      \
-  strlcpybuff(argv[0], token, cmdl_room(bufsize, ptr));                        \
-  ptr += (int) (strlen(argv[0]) + 1);                                          \
-  argc++
-// END OF COPY OF cmdl_ins in htscoremain.c
-
 /*
   Aliases for command-line and config file definitions
   These definitions can be used:

src/htsalias.h

@@ -52,6 +52,34 @@ const char *opttype_value(int p);
 const char *opthelp_value(int p);
 const char *hts_gethome(void);
 void expand_home(String * str);
+
+/* Command-line argv-block builders, shared by htscoremain.c (the CLI parser)
+   and htsalias.c (config-file alias expansion). Tokens are packed back-to-back
+   into x_argvblk (total capacity bufsize); each argv[] entry points into the
+   block. cmdl_room bounds every copy: the running offset ptr can outrun the
+   block (alias / doit.log expansion outpacing the +32768 slack), so it yields
+   0 rather than a wrapped size_t and the bounded copy aborts cleanly. */
+#define cmdl_room(bufsize, ptr)                                                \
+  ((ptr) < (size_t) (bufsize) ? (size_t) (bufsize) - (ptr) : 0)
+
+/* Append a token as a new argv[argc]. */
+#define cmdl_add(token, argc, argv, buff, bufsize, ptr)                        \
+  argv[argc] = (buff + ptr);                                                   \
+  strlcpybuff(argv[argc], token, cmdl_room(bufsize, ptr));                     \
+  ptr += (int) (strlen(argv[argc]) + 1);                                       \
+  argc++
+
+/* Insert a token at argv[0], shifting the existing argc entries up by one. */
+#define cmdl_ins(token, argc, argv, buff, bufsize, ptr)                        \
+  {                                                                            \
+    int i;                                                                     \
+    for (i = argc; i > 0; i--)                                                 \
+      argv[i] = argv[i - 1];                                                   \
+  }                                                                            \
+  argv[0] = (buff + ptr);                                                      \
+  strlcpybuff(argv[0], token, cmdl_room(bufsize, ptr));                        \
+  ptr += (int) (strlen(argv[0]) + 1);                                          \
+  argc++
 #endif
 
 #endif

src/htscache_selftest.c

@@ -52,6 +52,9 @@ Please visit our Website: http://www.httrack.com
 
 #define SELFTEST_VOLUME 3000 /* number of small entries in the scale pass */
 
+/* prefix on assertion failures; set per entry point (-#A vs -#B) */
+static const char *selftest_tag = "cache-selftest";
+
 /* Open a cache session. A write session (ro=0) rotates new.zip -> old.zip and
    opens a fresh new.zip; a read session (ro=1) opens new.zip in place. */
 static void selftest_open(cache_back *cache, httrackp *opt, int ro) {
@@ -95,15 +98,13 @@ static void selftest_close(cache_back *cache) {
      that exits right after (same choice as the other -# cache subcommands) */
 }
 
-/* Store one entry. The body is copied into a private buffer (any size), so
-   callers may pass const data and cache_add never sees a cast-away qualifier;
-   it consumes everything synchronously, so the copy is freed on return. */
+/* Store one entry; the body is copied so callers may pass const data. */
 static void store_entry(httrackp *opt, cache_back *cache, const char *adr,
                         const char *fil, const char *save, int statuscode,
                         const char *msg, const char *contenttype,
                         const char *charset, const char *lastmodified,
                         const char *etag, const char *location,
-                        const char *body, size_t body_len) {
+                        const char *cdispo, const char *body, size_t body_len) {
   htsblk r;
   char locbuf[HTS_URLMAXSIZE * 2];
   char *bodycopy = NULL;
@@ -116,32 +117,30 @@ static void store_entry(httrackp *opt, cache_back *cache, const char *adr,
   strcpybuff(r.charset, charset);
   strcpybuff(r.lastmodified, lastmodified);
   strcpybuff(r.etag, etag);
+  strcpybuff(r.cdispo, cdispo);
   strcpybuff(locbuf, location);
   r.location = locbuf;
   r.is_write = 0;
-  /* an empty body must be a NULL pointer: cache_add rejects a non-NULL
-     pointer with size 0 */
+  /* an empty body must be NULL: cache_add rejects non-NULL with size 0 */
   if (body_len != 0) {
     bodycopy = malloct(body_len);
     memcpy(bodycopy, body, body_len);
     r.adr = bodycopy;
   }
-  /* all_in_cache=1: keep the body in the ZIP whatever the content-type,
-     so the read path never depends on a file on disk */
+  /* all_in_cache=1: body stays in the ZIP, so reads never need a disk file */
   cache_add(opt, cache, &r, adr, fil, save, 1, NULL);
   if (bodycopy != NULL) {
     freet(bodycopy);
   }
 }
 
-/* Read one entry back and check every field. Returns the number of
-   mismatches (0 == success). */
+/* Read one entry back and check every field. Returns the mismatch count. */
 static int check_entry(httrackp *opt, cache_back *cache, const char *adr,
                        const char *fil, int statuscode, const char *msg,
                        const char *contenttype, const char *charset,
                        const char *lastmodified, const char *etag,
-                       const char *location, const char *body,
-                       size_t body_len) {
+                       const char *location, const char *cdispo,
+                       const char *body, size_t body_len) {
   int fail = 0;
   char *locbuf = malloct(HTS_URLMAXSIZE * 2);
   htsblk r;
@@ -153,15 +152,14 @@ static int check_entry(httrackp *opt, cache_back *cache, const char *adr,
 #define CHECK_STR(field, want)                                                 \
   do {                                                                         \
     if (strcmp((field), (want)) != 0) {                                        \
-      fprintf(stderr,                                                          \
-              "cache-selftest: %s%s: " #field " is '%s', expected '%s'\n",     \
-              adr, fil, (field), (want));                                      \
+      fprintf(stderr, "%s: %s%s: " #field " is '%s', expected '%s'\n",         \
+              selftest_tag, adr, fil, (field), (want));                        \
       fail++;                                                                  \
     }                                                                          \
   } while (0)
 
   if (r.statuscode != statuscode) {
-    fprintf(stderr, "cache-selftest: %s%s: statuscode is %d, expected %d\n",
+    fprintf(stderr, "%s: %s%s: statuscode is %d, expected %d\n", selftest_tag,
             adr, fil, r.statuscode, statuscode);
     fail++;
   }
@@ -171,24 +169,23 @@ static int check_entry(httrackp *opt, cache_back *cache, const char *adr,
   CHECK_STR(r.lastmodified, lastmodified);
   CHECK_STR(r.etag, etag);
   CHECK_STR(locbuf, location);
+  CHECK_STR(r.cdispo, cdispo);
 
   if (r.size != (LLint) body_len) {
-    fprintf(stderr, "cache-selftest: %s%s: size is " LLintP ", expected %d\n",
+    fprintf(stderr, "%s: %s%s: size is " LLintP ", expected %d\n", selftest_tag,
             adr, fil, (LLint) r.size, (int) body_len);
     fail++;
   } else if (body_len != 0 &&
              (r.adr == NULL || memcmp(r.adr, body, body_len) != 0)) {
-    fprintf(stderr, "cache-selftest: %s%s: body mismatch\n", adr, fil);
+    fprintf(stderr, "%s: %s%s: body mismatch\n", selftest_tag, adr, fil);
     fail++;
   }
 
-  /* The loaded body must be NUL-terminated at [size]: cache_readex's strlen()
-     consumers (htscore.c:1046, htscache.c) rely on it, and a missing
-     terminator is a heap over-read. The buffer is malloc(size + slack), so
-     reading [size] is in bounds. */
+  /* loaded body must be NUL-terminated at [size] for cache_readex's strlen()
+     consumers; buffer is malloc(size + slack) so [size] is in bounds */
   if (r.adr != NULL && r.adr[r.size] != '\0') {
-    fprintf(stderr, "cache-selftest: %s%s: body not NUL-terminated at [size]\n",
-            adr, fil);
+    fprintf(stderr, "%s: %s%s: body not NUL-terminated at [size]\n",
+            selftest_tag, adr, fil);
     fail++;
   }
 
@@ -378,27 +375,29 @@ int cache_selftests(httrackp *opt, const char *dir) {
   /* pass 1: create everything in a single write session */
   selftest_open_for_write(&cache, opt);
 
-  /* edge cases: normal HTML page */
+  /* edge cases (cdispo "" except where noted): normal HTML page */
   store_entry(opt, &cache, "example.com", "/", "example.com/index.html", 200,
               "OK", "text/html", "utf-8", "Mon, 01 Jan 2024 00:00:00 GMT",
-              "etag-normal", "", body_index, strlen(body_index));
+              "etag-normal", "", "", body_index, strlen(body_index));
   /* redirect: empty body, empty optional fields, near-limit location */
   store_entry(opt, &cache, "example.com", "/moved", "example.com/moved.html",
               301, "Moved Permanently", "text/html", "", "", "", location_long,
-              NULL, 0);
-  /* non-HTML content-type kept in cache via all_in_cache, near-limit etag */
+              "", NULL, 0);
+  /* non-HTML content-type, near-limit etag */
   store_entry(opt, &cache, "example.com", "/api", "example.com/api.json", 200,
               "OK", "application/json", "utf-8",
-              "Tue, 02 Jan 2024 12:00:00 GMT", etag_long, "", body_api,
+              "Tue, 02 Jan 2024 12:00:00 GMT", etag_long, "", "", body_api,
               strlen(body_api));
-  /* binary body */
+  /* binary body, with a Content-Disposition */
   store_entry(opt, &cache, "example.com", "/logo", "example.com/logo.png", 200,
-              "OK", "image/png", "", "", "etag-bin", "", binary_body,
+              "OK", "image/png", "", "", "etag-bin", "",
+              "attachment; filename=\"logo.png\"", binary_body,
               sizeof(binary_body));
-  /* error status with a body and a location (non-2xx codes are cached too) */
+  /* error status with a body and a location */
   store_entry(opt, &cache, "example.com", "/gone", "example.com/gone.html", 404,
               "Not Found", "text/html", "utf-8", "", "etag-404",
-              "https://example.com/where-it-went", body_404, strlen(body_404));
+              "https://example.com/where-it-went", "", body_404,
+              strlen(body_404));
 
   /* scale: a few thousand small entries */
   for (i = 0; i < SELFTEST_VOLUME; i++) {
@@ -408,7 +407,7 @@ int cache_selftests(httrackp *opt, const char *dir) {
     sprintf(save, "example.com/v/%05d.html", i);
     sprintf(body, "<html>volume entry %d</html>", i);
     store_entry(opt, &cache, "example.com", fil, save, 200, "OK", "text/html",
-                "utf-8", "", "", "", body, strlen(body));
+                "utf-8", "", "", "", "", body, strlen(body));
   }
 
   /* compression: a few large bodies */
@@ -418,7 +417,7 @@ int cache_selftests(httrackp *opt, const char *dir) {
     sprintf(fil, "/big/%d.bin", i);
     sprintf(save, "example.com/big/%d.bin", i);
     store_entry(opt, &cache, "example.com", fil, save, 200, "OK",
-                "application/octet-stream", "", "", "", "", large_body[i],
+                "application/octet-stream", "", "", "", "", "", large_body[i],
                 large_size[i]);
   }
 
@@ -427,22 +426,24 @@ int cache_selftests(httrackp *opt, const char *dir) {
   /* pass 2: read back and verify everything round-tripped */
   selftest_open_for_read(&cache, opt);
 
-  failures += check_entry(opt, &cache, "example.com", "/", 200, "OK",
-                          "text/html", "utf-8", "Mon, 01 Jan 2024 00:00:00 GMT",
-                          "etag-normal", "", body_index, strlen(body_index));
+  failures +=
+      check_entry(opt, &cache, "example.com", "/", 200, "OK", "text/html",
+                  "utf-8", "Mon, 01 Jan 2024 00:00:00 GMT", "etag-normal", "",
+                  "", body_index, strlen(body_index));
   failures += check_entry(opt, &cache, "example.com", "/moved", 301,
                           "Moved Permanently", "text/html", "", "", "",
-                          location_long, NULL, 0);
+                          location_long, "", NULL, 0);
   failures +=
       check_entry(opt, &cache, "example.com", "/api", 200, "OK",
                   "application/json", "utf-8", "Tue, 02 Jan 2024 12:00:00 GMT",
-                  etag_long, "", body_api, strlen(body_api));
+                  etag_long, "", "", body_api, strlen(body_api));
   failures +=
       check_entry(opt, &cache, "example.com", "/logo", 200, "OK", "image/png",
-                  "", "", "etag-bin", "", binary_body, sizeof(binary_body));
+                  "", "", "etag-bin", "", "attachment; filename=\"logo.png\"",
+                  binary_body, sizeof(binary_body));
   failures += check_entry(opt, &cache, "example.com", "/gone", 404, "Not Found",
                           "text/html", "utf-8", "", "etag-404",
-                          "https://example.com/where-it-went", body_404,
+                          "https://example.com/where-it-went", "", body_404,
                           strlen(body_404));
 
   for (i = 0; i < SELFTEST_VOLUME; i++) {
@@ -452,7 +453,7 @@ int cache_selftests(httrackp *opt, const char *dir) {
     sprintf(body, "<html>volume entry %d</html>", i);
     failures +=
         check_entry(opt, &cache, "example.com", fil, 200, "OK", "text/html",
-                    "utf-8", "", "", "", body, strlen(body));
+                    "utf-8", "", "", "", "", body, strlen(body));
   }
 
   for (i = 0; i < large_count; i++) {
@@ -460,7 +461,7 @@ int cache_selftests(httrackp *opt, const char *dir) {
 
     sprintf(fil, "/big/%d.bin", i);
     failures += check_entry(opt, &cache, "example.com", fil, 200, "OK",
-                            "application/octet-stream", "", "", "", "",
+                            "application/octet-stream", "", "", "", "", "",
                             large_body[i], large_size[i]);
   }
 
@@ -470,7 +471,7 @@ int cache_selftests(httrackp *opt, const char *dir) {
   selftest_open_for_write(&cache, opt);
   store_entry(opt, &cache, "example.com", "/", "example.com/index.html", 200,
               "OK", "text/html", "iso-8859-1", "Wed, 03 Jan 2024 09:30:00 GMT",
-              "etag-updated", "", body_updated, strlen(body_updated));
+              "etag-updated", "", "", body_updated, strlen(body_updated));
   selftest_close(&cache);
 
   /* pass 4: re-read and confirm the updated value, not the old one */
@@ -478,7 +479,7 @@ int cache_selftests(httrackp *opt, const char *dir) {
   failures +=
       check_entry(opt, &cache, "example.com", "/", 200, "OK", "text/html",
                   "iso-8859-1", "Wed, 03 Jan 2024 09:30:00 GMT", "etag-updated",
-                  "", body_updated, strlen(body_updated));
+                  "", "", body_updated, strlen(body_updated));
   selftest_close(&cache);
 
   /* pass 5: the disk-fallback read path (X-In-Cache: 0, body on disk) */
@@ -490,3 +491,97 @@ int cache_selftests(httrackp *opt, const char *dir) {
 
   return failures;
 }
+
+/* Golden fixture: a small frozen cache read back to guard the read path and ZIP
+   format. The table is the contract; tests/fixtures/cache-golden/.../new.zip is
+   a witness written once via `httrack -#B <dir> regen`. Bodies stay in the ZIP
+   (all_in_cache=1), so a read needs only new.zip -- fully portable. */
+
+/* embedded NUL + high bytes: the binary-safe read path */
+static const char golden_binary[] = {
+    'P',  'N',  'G', '\0', '\r', '\n',        (char) 0xFF, (char) 0x80,
+    '\0', '\0', 'e', 'n',  'd',  (char) 0xCA, (char) 0xFE, '\n'};
+
+typedef struct {
+  const char *adr, *fil, *save, *msg, *contenttype, *charset, *lastmodified,
+      *etag, *location, *cdispo, *body;
+  size_t body_len;
+  int statuscode;
+} golden_entry;
+
+/* string-literal body + length (drops the terminator); the binary array passes
+   its length explicitly, every byte counts */
+#define GBODY(s) (s), (sizeof(s) - 1)
+
+static const golden_entry golden_entries[] = {
+    /* normal HTML page */
+    {"example.com", "/", "example.com/index.html", "OK", "text/html", "utf-8",
+     "Mon, 01 Jan 2024 00:00:00 GMT", "etag-normal", "", "",
+     GBODY("<html><body>hello</body></html>"), 200},
+    /* redirect: empty body and optionals, a Location */
+    {"example.com", "/moved", "example.com/moved.html", "Moved Permanently",
+     "text/html", "", "", "", "https://example.com/new-home", "", NULL, 0, 301},
+    /* non-HTML content */
+    {"example.com", "/api", "example.com/api.json", "OK", "application/json",
+     "utf-8", "Tue, 02 Jan 2024 12:00:00 GMT", "etag-api", "", "",
+     GBODY("{\"k\":\"v\"}"), 200},
+    /* binary body with a Content-Disposition */
+    {"example.com", "/logo", "example.com/logo.png", "OK", "image/png", "", "",
+     "etag-bin", "", "attachment; filename=\"logo.png\"", golden_binary,
+     sizeof(golden_binary), 200},
+    /* error status with a body and a Location */
+    {"example.com", "/gone", "example.com/gone.html", "Not Found", "text/html",
+     "utf-8", "", "etag-404", "https://example.com/where-it-went", "",
+     GBODY("<html><body>404 Not Found</body></html>"), 404},
+};
+
+#define GOLDEN_COUNT (sizeof(golden_entries) / sizeof(golden_entries[0]))
+
+static void golden_setup(httrackp *opt, const char *dir) {
+  char base[HTS_URLMAXSIZE];
+
+  strcpybuff(base, dir);
+  if (base[0] != '\0' && base[strlen(base) - 1] != '/') {
+    strcatbuff(base, "/");
+  }
+  StringCopy(opt->path_log, base);
+  StringCopy(opt->path_html, base);
+  StringCopy(opt->path_html_utf8, base);
+  opt->cache = 1;
+}
+
+int cache_golden_selftest(httrackp *opt, const char *dir, int regen) {
+  int failures = 0;
+  size_t k;
+  cache_back cache;
+
+  selftest_tag = "cache-golden";
+  golden_setup(opt, dir);
+
+  /* regen rewrites the fixture from the table; the test never passes it, so the
+     read pass verifies bytes a previous build froze */
+  if (regen) {
+    selftest_open_for_write(&cache, opt);
+    for (k = 0; k < GOLDEN_COUNT; k++) {
+      const golden_entry *e = &golden_entries[k];
+
+      store_entry(opt, &cache, e->adr, e->fil, e->save, e->statuscode, e->msg,
+                  e->contenttype, e->charset, e->lastmodified, e->etag,
+                  e->location, e->cdispo, e->body, e->body_len);
+    }
+    selftest_close(&cache);
+  }
+
+  selftest_open_for_read(&cache, opt);
+  for (k = 0; k < GOLDEN_COUNT; k++) {
+    const golden_entry *e = &golden_entries[k];
+
+    failures +=
+        check_entry(opt, &cache, e->adr, e->fil, e->statuscode, e->msg,
+                    e->contenttype, e->charset, e->lastmodified, e->etag,
+                    e->location, e->cdispo, e->body, e->body_len);
+  }
+  selftest_close(&cache);
+
+  return failures;
+}

src/htscache_selftest.h

@@ -44,6 +44,14 @@ typedef struct httrackp httrackp;
    Returns the number of failed checks (0 == success). */
 int cache_selftests(httrackp *opt, const char *dir);
 
+/* Read a committed (frozen) cache fixture under <dir>/hts-cache/new.zip and
+   assert a fixed set of entries decodes field- and byte-exact. Unlike
+   cache_selftests (write-then-read with the same build, a round-trip), this
+   reads bytes an earlier build froze, so it catches read-path / format drift.
+   regen!=0 first rewrites the fixture from the same table (to regenerate the
+   committed file, never by the test). Returns the failed-check count. */
+int cache_golden_selftest(httrackp *opt, const char *dir, int regen);
+
 #endif
 
 #endif

src/htscoremain.c

@@ -69,31 +69,6 @@ Please visit our Website: http://www.httrack.com
 /* Resolver */
 extern int IPV6_resolver;
 
-/* Remaining room in the argv block; 0 once it is exhausted (alias expansion or
-   doit.log insertion can outrun the +32768 slack), so the copy aborts cleanly
-   instead of the subtraction wrapping to a huge unbounded size. */
-#define cmdl_room(bufsize, ptr)                                                \
-  ((ptr) < (size_t) (bufsize) ? (size_t) (bufsize) - (ptr) : 0)
-
-// Add a command in the argc/argv (buff has total capacity bufsize)
-#define cmdl_add(token, argc, argv, buff, bufsize, ptr)                        \
-  argv[argc] = (buff + ptr);                                                   \
-  strlcpybuff(argv[argc], token, cmdl_room(bufsize, ptr));                     \
-  ptr += (int) (strlen(argv[argc]) + 2);                                       \
-  argc++
-
-// Insert a command in the argc/argv (buff has total capacity bufsize)
-#define cmdl_ins(token, argc, argv, buff, bufsize, ptr)                        \
-  {                                                                            \
-    int i;                                                                     \
-    for (i = argc; i > 0; i--)                                                 \
-      argv[i] = argv[i - 1];                                                   \
-  }                                                                            \
-  argv[0] = (buff + ptr);                                                      \
-  strlcpybuff(argv[0], token, cmdl_room(bufsize, ptr));                        \
-  ptr += (int) (strlen(argv[0]) + 2);                                          \
-  argc++
-
 #define htsmain_free() do { \
   if (url != NULL) { \
     free(url); \
@@ -2465,6 +2440,22 @@ static int hts_main_internal(int argc, char **argv, httrackp * opt) {
                   return 1;
                 }
                 break;
+              case 'B': // golden cache fixture read: httrack -#B <dir> [regen]
+                if (na + 1 < argc) {
+                  const int regen =
+                      (na + 2 < argc && strcmp(argv[na + 2], "regen") == 0);
+                  const int err =
+                      cache_golden_selftest(opt, argv[na + 1], regen);
+
+                  printf("cache-golden: %s\n", err ? "FAIL" : "OK");
+                  htsmain_free();
+                  return err;
+                } else {
+                  fprintf(stderr, "Option #B requires a directory argument\n");
+                  htsmain_free();
+                  return 1;
+                }
+                break;
               case 'C':        // list cache files : httrack -#C '*spid*.gif' will attempt to find the matching file
                 {
                   int hasFilter = 0;

src/htsserver.c

@@ -1783,7 +1783,7 @@ static int LANG_LIST(const char *path, char *buffer, size_t buffer_size) {
   buffer[0] = '\0';
   do {
     QLANG_T(i);
-    strlcpybuff(lang_str, "LANGUAGE_NAME", buffer_size);
+    strlcpybuff(lang_str, "LANGUAGE_NAME", sizeof(lang_str));
     htslang_load(lang_str, sizeof(lang_str), path);
     if (strlen(lang_str) > 0) {
       if (buffer[0])

templates/Makefile.in

@@ -1,535 +0,0 @@
-# Makefile.in generated by automake 1.17 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2024 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-am__rm_f = rm -f $(am__rm_f_notfound)
-am__rm_rf = rm -rf $(am__rm_f_notfound)
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = templates
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/snprintf.m4 \
-	$(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-  || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-       $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
-  }
-am__installdirs = "$(DESTDIR)$(templatesdir)"
-DATA = $(templates_DATA)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_CFLAGS = @AM_CFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BASH = @BASH@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CFLAGS_PIE = @CFLAGS_PIE@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPPFLAGS = @CPPFLAGS@
-CSCOPE = @CSCOPE@
-CTAGS = @CTAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CFLAGS = @DEFAULT_CFLAGS@
-DEFAULT_LDFLAGS = @DEFAULT_LDFLAGS@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DL_LIBS = @DL_LIBS@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-ETAGS = @ETAGS@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-FILECMD = @FILECMD@
-GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-HTTPS_SUPPORT = @HTTPS_SUPPORT@
-ICONV_LIBS = @ICONV_LIBS@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LDFLAGS_PIE = @LDFLAGS_PIE@
-LFS_FLAG = @LFS_FLAG@
-LIBC_FORCE_LINK = @LIBC_FORCE_LINK@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_CV_OBJDIR = @LT_CV_OBJDIR@
-LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-ONLINE_UNIT_TESTS = @ONLINE_UNIT_TESTS@
-OPENSSL_LIBS = @OPENSSL_LIBS@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SHLIBPATH_VAR = @SHLIBPATH_VAR@
-SOCKET_LIBS = @SOCKET_LIBS@
-STRIP = @STRIP@
-THREADS_CFLAGS = @THREADS_CFLAGS@
-THREADS_LIBS = @THREADS_LIBS@
-V6_FLAG = @V6_FLAG@
-VERSION = @VERSION@
-VERSION_INFO = @VERSION_INFO@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__rm_f_notfound = @am__rm_f_notfound@
-am__tar = @am__tar@
-am__untar = @am__untar@
-am__xargs_n = @am__xargs_n@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-runstatedir = @runstatedir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-templatesdir = $(datadir)/httrack/templates
-templates_DATA = index-body.html index-header.html topindex-footer.html \
-	index-footer.html topindex-body.html topindex-header.html \
-	topindex-bodycat.html
-
-EXTRA_DIST = $(templates_DATA)
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu templates/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu templates/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-install-templatesDATA: $(templates_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(templates_DATA)'; test -n "$(templatesdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(templatesdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(templatesdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(templatesdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(templatesdir)" || exit $$?; \
-	done
-
-uninstall-templatesDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(templates_DATA)'; test -n "$(templatesdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(templatesdir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-distdir: $(BUILT_SOURCES)
-	$(MAKE) $(AM_MAKEFLAGS) distdir-am
-
-distdir-am: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(templatesdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-$(am__rm_f) $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-templatesDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-templatesDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	cscopelist-am ctags-am distclean distclean-generic \
-	distclean-libtool distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip install-templatesDATA installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
-	uninstall-am uninstall-templatesDATA
-
-.PRECIOUS: Makefile
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
-
-# Tell GNU make to disable its built-in pattern rules.
-%:: %,v
-%:: RCS/%,v
-%:: RCS/%
-%:: s.%
-%:: SCCS/s.%

test-driver

@@ -1,160 +0,0 @@
-#! /bin/sh
-# test-driver - basic testsuite driver script.
-
-scriptversion=2024-06-19.01; # UTC
-
-# Copyright (C) 2011-2024 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-# Make unconditional expansion of undefined variables an error.  This
-# helps a lot in preventing typo-related bugs.
-set -u
-
-usage_error ()
-{
-  echo "$0: $*" >&2
-  print_usage >&2
-  exit 2
-}
-
-print_usage ()
-{
-  cat <<END
-Usage:
-  test-driver --test-name NAME --log-file PATH --trs-file PATH
-              [--expect-failure {yes|no}] [--color-tests {yes|no}]
-              [--collect-skipped-logs {yes|no}]
-              [--enable-hard-errors {yes|no}] [--]
-              TEST-SCRIPT [TEST-SCRIPT-ARGUMENTS]
-
-The '--test-name', '--log-file' and '--trs-file' options are mandatory.
-See the GNU Automake documentation for information.
-
-Report bugs to <bug-automake@gnu.org>.
-GNU Automake home page: <https://www.gnu.org/software/automake/>.
-General help using GNU software: <https://www.gnu.org/gethelp/>.
-END
-}
-
-test_name= # Used for reporting.
-log_file=  # Where to save the output of the test script.
-trs_file=  # Where to save the metadata of the test run.
-expect_failure=no
-color_tests=no
-collect_skipped_logs=yes
-enable_hard_errors=yes
-while test $# -gt 0; do
-  case $1 in
-  --help) print_usage; exit $?;;
-  --version) echo "test-driver (GNU Automake) $scriptversion"; exit $?;;
-  --test-name) test_name=$2; shift;;
-  --log-file) log_file=$2; shift;;
-  --trs-file) trs_file=$2; shift;;
-  --color-tests) color_tests=$2; shift;;
-  --collect-skipped-logs) collect_skipped_logs=$2; shift;;
-  --expect-failure) expect_failure=$2; shift;;
-  --enable-hard-errors) enable_hard_errors=$2; shift;;
-  --) shift; break;;
-  -*) usage_error "invalid option: '$1'";;
-   *) break;;
-  esac
-  shift
-done
-
-missing_opts=
-test x"$test_name" = x && missing_opts="$missing_opts --test-name"
-test x"$log_file"  = x && missing_opts="$missing_opts --log-file"
-test x"$trs_file"  = x && missing_opts="$missing_opts --trs-file"
-if test x"$missing_opts" != x; then
-  usage_error "the following mandatory options are missing:$missing_opts"
-fi
-
-if test $# -eq 0; then
-  usage_error "missing argument"
-fi
-
-if test $color_tests = yes; then
-  # Keep this in sync with 'lib/am/check.am:$(am__tty_colors)'.
-  red='' # Red.
-  grn='' # Green.
-  lgn='' # Light green.
-  blu='' # Blue.
-  mgn='' # Magenta.
-  std=''     # No color.
-else
-  red= grn= lgn= blu= mgn= std=
-fi
-
-do_exit='rm -f $log_file $trs_file; (exit $st); exit $st'
-trap "st=129; $do_exit" 1
-trap "st=130; $do_exit" 2
-trap "st=141; $do_exit" 13
-trap "st=143; $do_exit" 15
-
-# Test script is run here. We create the file first, then append to it,
-# to ameliorate tests themselves also writing to the log file. Our tests
-# don't, but others can (automake bug#35762).
-: >"$log_file"
-"$@" >>"$log_file" 2>&1
-estatus=$?
-
-if test $enable_hard_errors = no && test $estatus -eq 99; then
-  tweaked_estatus=1
-else
-  tweaked_estatus=$estatus
-fi
-
-case $tweaked_estatus:$expect_failure in
-  0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
-  0:*)   col=$grn res=PASS  recheck=no  gcopy=no;;
-  77:*)  col=$blu res=SKIP  recheck=no  gcopy=$collect_skipped_logs;;
-  99:*)  col=$mgn res=ERROR recheck=yes gcopy=yes;;
-  *:yes) col=$lgn res=XFAIL recheck=no  gcopy=yes;;
-  *:*)   col=$red res=FAIL  recheck=yes gcopy=yes;;
-esac
-
-# Report the test outcome and exit status in the logs, so that one can
-# know whether the test passed or failed simply by looking at the '.log'
-# file, without the need of also peaking into the corresponding '.trs'
-# file (automake bug#11814).
-echo "$res $test_name (exit status: $estatus)" >>"$log_file"
-
-# Report outcome to console.
-echo "${col}${res}${std}: $test_name"
-
-# Register the test result, and other relevant metadata.
-echo ":test-result: $res" > $trs_file
-echo ":global-test-result: $res" >> $trs_file
-echo ":recheck: $recheck" >> $trs_file
-echo ":copy-in-global-log: $gcopy" >> $trs_file
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
-# End:

tests/00_runnable.test

@@ -1,5 +1,7 @@
 #!/bin/bash
 #
 
+set -euo pipefail
+
 # check that httrack starts
 httrack --version >/dev/null

tests/01_engine-cache-golden.test

@@ -0,0 +1,48 @@
+#!/bin/bash
+#
+# Keep this POSIX-portable: the harness runs it via $(BASH), which is a plain
+# POSIX /bin/sh on some platforms (e.g. macOS), so avoid bashisms and GNU-only
+# tool flags despite the #!/bin/bash above.
+
+# Golden cache-format regression test (driven by 'httrack -#B <dir>').
+#
+# 01_engine-cache.test writes the cache with the same build it reads back (a
+# round-trip), so it cannot catch a read-path or ZIP-format regression where
+# writer and reader drift together. This reads a *committed* cache frozen by an
+# earlier build and asserts a fixed set of entries still decodes field- and
+# byte-exact.
+#
+# Regenerate the fixture after a deliberate format change with
+# 'httrack -#B <dir> regen', then copy <dir>/hts-cache/new.zip over the
+# committed file.
+
+set -eu
+
+: "${top_srcdir:=..}"
+fixture="$top_srcdir/tests/fixtures/cache-golden"
+
+test -e "$fixture/hts-cache/new.zip" || {
+    echo "missing committed cache fixture: $fixture/hts-cache/new.zip" >&2
+    exit 1
+}
+
+dir=$(mktemp -d)
+trap 'rm -rf "$dir"' EXIT
+
+# Read against a private copy so the source tree is never touched (a read
+# session does not write, but copying keeps the test hermetic). Create the dir
+# with mkdir so it is writable for the cleanup trap: under "make distcheck" the
+# srcdir is read-only, and "cp -r" of that directory would carry its read-only
+# mode over and defeat the rm -rf.
+mkdir -p "$dir/hts-cache"
+cp "$fixture/hts-cache/new.zip" "$dir/hts-cache/new.zip"
+
+out=$(httrack -#B "$dir")
+
+# Match the exact success line: the read must have found and verified every
+# entry, not merely failed to enter the mode (a bad -#B falls through to the
+# usage screen, which also exits non-zero but never prints this).
+test "$out" = "cache-golden: OK" || {
+    echo "expected 'cache-golden: OK', got: $out" >&2
+    exit 1
+}

tests/01_engine-charset.test

@@ -1,6 +1,8 @@
 #!/bin/bash
 #
 
+set -euo pipefail
+
 # charset -> UTF-8 conversion (hts_convertStringToUTF8).
 # -#3 <charset> <string> prints the string re-decoded from <charset> as UTF-8.
 conv() {

tests/01_engine-cmdline.test

@@ -8,7 +8,7 @@
 # --headers) forms, and an over-cap value is refused cleanly rather than
 # overrunning a fixed scratch buffer.
 
-set -u
+set -euo pipefail
 
 tmp=$(mktemp -d "${TMPDIR:-/tmp}/httrack_cmdline.XXXXXX") || exit 1
 trap 'rm -rf "$tmp"' EXIT HUP INT QUIT PIPE TERM
@@ -26,8 +26,8 @@ run() {
     shift
     rm -rf "$out"
     mkdir -p "$out"
-    httrack "file://$tmp/index.html" -O "$out" --quiet -n "$@" >"$out/.log" 2>&1
-    RC=$?
+    RC=0
+    httrack "file://$tmp/index.html" -O "$out" --quiet -n "$@" >"$out/.log" 2>&1 || RC=$?
 }
 
 # crawl using exactly the given args as the only URL(s), no implicit primary URL;
@@ -37,8 +37,8 @@ run_only() {
     shift
     rm -rf "$out"
     mkdir -p "$out"
-    httrack -O "$out" --quiet -n "$@" >"$out/.log" 2>&1
-    RC=$?
+    RC=0
+    httrack -O "$out" --quiet -n "$@" >"$out/.log" 2>&1 || RC=$?
 }
 
 # assert the value was accepted: clean exit and the fixture was mirrored

tests/01_engine-doitlog.test

@@ -0,0 +1,92 @@
+#!/bin/bash
+#
+
+# doit.log reprise (no network). Re-running httrack in a mirror directory with
+# NO url makes the engine read hts-cache/doit.log and re-insert every recorded
+# argument into the command line through htscoremain.c's cmdl_ins macro (the
+# x_argvblk builder). That path is distinct from the rc-file one in
+# 01_engine-rcfile.test (htsalias.c) and from the url-on-command-line update in
+# 02_update-cache.test, and nothing else exercises it. Two properties:
+#   1. A multi-token reprise re-mirrors cleanly: every token (the url and each
+#      option) survives the back-to-back packing, so the no-url run reproduces
+#      the file set with no errors. A packing/bound bug corrupts a later token
+#      and surfaces as an error or a missing file.
+#   2. The reprise actually re-crawls through the inserted url: changing a source
+#      file and re-running with no url picks up the new content.
+
+set -euo pipefail
+
+# Resolve httrack to an absolute path before we cd: PATH may hold a
+# build-relative entry that would not resolve from the temp directory.
+bin=$(command -v httrack) || {
+    echo "FAIL: httrack not found on PATH"
+    exit 1
+}
+case "$bin" in
+/*) ;;
+*) bin="$(cd "$(dirname "$bin")" && pwd)/$(basename "$bin")" ;;
+esac
+
+tmp=$(mktemp -d "${TMPDIR:-/tmp}/httrack_doitlog.XXXXXX") || exit 1
+trap 'rm -rf "$tmp"' EXIT HUP INT QUIT PIPE TERM
+
+site="$tmp/site"
+out="$tmp/out"
+mkdir -p "$site/sub"
+printf '<a href="a.html">a</a> <a href="sub/b.html">b</a>' >"$site/index.html"
+echo 'OLDCONTENT' >"$site/a.html"
+echo '<p>bbb</p>' >"$site/sub/b.html"
+url="file://$site/index.html"
+
+# count Error: lines in the log (grep -c exits 1 on zero matches: guard it)
+errors() { grep -ciE '^[0-9:]*[[:space:]]Error:' "$out/hts-log.txt" || true; }
+
+# initial mirror with the url and a handful of options, so doit.log records a
+# multi-token command line for cmdl_ins to re-insert one token at a time.
+rc=0
+"$bin" "$url" -O "$out" --quiet -n -%v0 -r3 >/dev/null 2>&1 || rc=$?
+test "$rc" -eq 0 || {
+    echo "FAIL: initial mirror exited $rc"
+    exit 1
+}
+test -f "$out/hts-cache/doit.log" || {
+    echo "FAIL: doit.log not written by the initial mirror"
+    exit 1
+}
+
+# --- 1. no-url reprise re-mirrors cleanly -----------------------------------
+# No url on the command line, so the engine loads doit.log and re-inserts the
+# recorded arguments (cmdl_ins). -O selects the mirror; argv carries no url.
+rc=0
+"$bin" -O "$out" --quiet >/dev/null 2>&1 || rc=$?
+test "$rc" -eq 0 || {
+    echo "FAIL: doit.log reprise exited $rc"
+    exit 1
+}
+test "$(errors)" = 0 || {
+    echo "FAIL: doit.log reprise reported errors (a token may have been corrupted)"
+    grep -iE 'Error:' "$out/hts-log.txt" | head -3
+    exit 1
+}
+for suffix in a.html sub/b.html; do
+    test -n "$(find "$out" -path "*/$suffix" -print -quit)" || {
+        echo "FAIL: $suffix missing after the no-url reprise"
+        exit 1
+    }
+done
+
+# --- 2. the reprise re-crawls through the inserted url -----------------------
+sleep 1
+echo 'NEWCONTENT' >"$site/a.html"
+rc=0
+"$bin" -O "$out" --quiet >/dev/null 2>&1 || rc=$?
+test "$rc" -eq 0 || {
+    echo "FAIL: second reprise exited $rc"
+    exit 1
+}
+grep -q NEWCONTENT "$(find "$out" -path '*/a.html' -print -quit)" || {
+    echo "FAIL: reprise did not pick up the changed source (inserted url not re-crawled)"
+    exit 1
+}
+
+exit 0

tests/01_engine-entities.test

@@ -1,6 +1,8 @@
 #!/bin/bash
 #
 
+set -euo pipefail
+
 # HTML entity unescaping (hts_unescapeEntitiesWithCharset).
 # -#6 <string> prints the string with entities decoded (UTF-8 output).
 ent() {

tests/01_engine-filter.test

@@ -1,6 +1,8 @@
 #!/bin/bash
 #
 
+set -euo pipefail
+
 # wildcard filter engine (strjoker), the core of +/- include/exclude rules.
 # -#0 <filter> <string> prints "<string> does match <filter>" or "... does NOT match ...".
 

tests/01_engine-hashtable.test

@@ -1,5 +1,7 @@
 #!/bin/bash
 #
 
+set -euo pipefail
+
 # httrack internal hashtable autotest on 100K keys
 httrack -#7 100000

tests/01_engine-idna.test

@@ -1,6 +1,8 @@
 #!/bin/bash
 #
 
+set -euo pipefail
+
 # IDNA / punycode encode (-#4) and decode (-#5). This code has a CVE history,
 # so the edge cases below cover passthrough, round-trips, and malformed input.
 

tests/01_engine-mime.test

@@ -1,6 +1,8 @@
 #!/bin/bash
 #
 
+set -euo pipefail
+
 # MIME type guessing from extension (get_httptype / give_mimext).
 # -#2 <path> prints "<path> is '<mime>'" then "and its local type is '.<ext>'".
 

tests/01_engine-parse.test

@@ -4,7 +4,7 @@
 # Offline HTML parser tests: each section crawls a file:// fixture (no network)
 # and checks which assets the parser captured and how it rewrote the links.
 
-set -u
+set -euo pipefail
 
 tmp=$(mktemp -d "${TMPDIR:-/tmp}/httrack_parse.XXXXXX") || exit 1
 trap 'rm -rf "$tmp"' EXIT HUP INT QUIT PIPE TERM
@@ -19,7 +19,9 @@ crawl() {
     local html="$1" out="$2"
     rm -rf "$out"
     mkdir -p "$out"
-    httrack "file://$html" -O "$out" --quiet --near -n >"$out/.log" 2>&1
+    # the crawl's own exit status is irrelevant here; the assertions below check
+    # the mirrored files, so don't let set -e trip on a non-zero httrack exit
+    httrack "file://$html" -O "$out" --quiet --near -n >"$out/.log" 2>&1 || true
 }
 
 # assert a file with the given basename was saved somewhere under <out>

tests/01_engine-simplify.test

@@ -1,6 +1,8 @@
 #!/bin/bash
 #
 
+set -euo pipefail
+
 # path simplify engine (fil_simplifie): collapses ./ and ../ segments.
 simp() {
 	test "$(httrack -O /dev/null -#1 "$1")" == "simplified=$2" || exit 1

tests/01_engine-strsafe.test

@@ -1,13 +1,16 @@
 #!/bin/bash
 #
 
+set -euo pipefail
+
 # htssafe.h bounded string operations (driven by 'httrack -#8').
 
 # Success path: every bounded op (strcpybuff/strcatbuff/strncatbuff/strlcpybuff)
 # must behave correctly. Like the other -# debug modes, a trailing token is
 # required (a bare '-#8' falls through to the usage screen).
-out=$(httrack -#8 run)
-test $? -eq 0 || exit 1
+rc=0
+out=$(httrack -#8 run) || rc=$?
+test "$rc" -eq 0 || exit 1
 test "$out" == "strsafe: OK" || exit 1
 
 # Overflow path: an over-capacity write into a sized buffer must be caught by
@@ -15,7 +18,8 @@ test "$out" == "strsafe: OK" || exit 1
 # Assert the htssafe abort signature specifically, so the test cannot pass for
 # an unrelated reason (e.g. the -#8 mode being gone and falling through to the
 # usage screen, which also exits non-zero).
-err=$(httrack -#8 overflow "this string is far too long for the buffer" 2>&1)
+# the bounded macro aborts (non-zero exit), so don't let set -e trip on it
+err=$(httrack -#8 overflow "this string is far too long for the buffer" 2>&1) || true
 case "$err" in
 	*"strsafe: NOT aborted"*) echo "over-capacity write was NOT caught" >&2; exit 1 ;;
 	*"overflow while copying"*) ;;
@@ -26,7 +30,7 @@ esac
 # capacity (4 bytes into a 4-byte buffer), so this also pins the boundary: a
 # '<=' off-by-one in the capacity check would let it through (and print "NOT
 # aborted"). Match the specific htsbuff abort message, not just any assert.
-err=$(httrack -#8 overflow-buff "abcd" 2>&1)
+err=$(httrack -#8 overflow-buff "abcd" 2>&1) || true
 case "$err" in
 	*"strsafe: NOT aborted"*) echo "htsbuff over-capacity write was NOT caught" >&2; exit 1 ;;
 	*"htsbuff append overflow"*) ;;

tests/02_manpage-regen.test

@@ -8,6 +8,9 @@
 # POSIX /bin/sh on some platforms (e.g. macOS), so avoid bashisms (such as
 # process substitution) despite the #!/bin/bash above.
 
+# pipefail is a bashism; keep to POSIX set flags ($(BASH) may be /bin/sh here).
+set -eu
+
 : "${top_srcdir:=..}"
 
 gen="$top_srcdir/man/makeman.sh"

tests/02_update-cache.test

@@ -10,7 +10,7 @@
 #   2. change a source file, re-mirror -> the update must pick up the new content
 #      (guards the update decision that reads the cached metadata).
 
-set -eu
+set -euo pipefail
 
 site=$(mktemp -d)
 out=$(mktemp -d)
@@ -42,7 +42,7 @@ test "$(errors)" = 0 || {
     exit 1
 }
 for suffix in a.html sub/b.html; do
-    find "$out" -path "*/$suffix" | grep -q . || {
+    test -n "$(find "$out" -path "*/$suffix" -print -quit)" || {
         echo "missing $suffix after update" >&2
         exit 1
     }

tests/10_crawl-simple.test

@@ -1,6 +1,8 @@
 #!/bin/bash
 #
 
+set -euo pipefail
+
 bash check-network.sh ||  ! echo "skipping online unit tests" || exit 77
 
 bash crawl-test.sh --errors 0 --files 5 httrack http://ut.httrack.com/simple/basic.html

tests/11_crawl-cookies.test

@@ -1,6 +1,8 @@
 #!/bin/bash
 #
 
+set -euo pipefail
+
 bash check-network.sh ||  ! echo "skipping online unit tests" || exit 77
 
 bash crawl-test.sh --errors 0 --files 3 \

tests/11_crawl-idna.test

@@ -1,6 +1,8 @@
 #!/bin/bash
 #
 
+set -euo pipefail
+
 bash check-network.sh ||  ! echo "skipping online unit tests" || exit 77
 
 # unicode tests

tests/11_crawl-international.test

@@ -1,6 +1,8 @@
 #!/bin/bash
 #
 
+set -euo pipefail
+
 bash check-network.sh ||  ! echo "skipping online unit tests" || exit 77
 
 # unicode tests

tests/11_crawl-longurl.test

@@ -1,6 +1,8 @@
 #!/bin/bash
 #
 
+set -euo pipefail
+
 bash check-network.sh ||  ! echo "skipping online unit tests" || exit 77
 
 # http://code.google.com/p/httrack/issues/detail?id=42&can=1

tests/11_crawl-parsing.test

@@ -1,6 +1,8 @@
 #!/bin/bash
 #
 
+set -euo pipefail
+
 bash check-network.sh ||  ! echo "skipping online unit tests" || exit 77
 
 # http://code.google.com/p/httrack/issues/detail?id=4&can=1

tests/12_crawl_https.test

@@ -1,9 +1,11 @@
 #!/bin/bash
 #
 
+set -euo pipefail
+
 bash check-network.sh ||  ! echo "skipping online unit tests" || exit 77
 
-if test "$HTTPS_SUPPORT" == "no"; then
+if test "${HTTPS_SUPPORT:-}" == "no"; then
 	echo "no https support compiled, skipping"
 	exit 77
 fi

tests/Makefile.am

@@ -1,4 +1,8 @@
-EXTRA_DIST = $(TESTS) crawl-test.sh run-all-tests.sh check-network.sh
+# Committed binary fixture read by 01_engine-cache-golden.test. List it
+# explicitly: automake does not expand wildcards in EXTRA_DIST, so a glob would
+# silently drop it from the dist tarball and break "make distcheck".
+EXTRA_DIST = $(TESTS) crawl-test.sh run-all-tests.sh check-network.sh \
+	fixtures/cache-golden/hts-cache/new.zip
 
 TESTS_ENVIRONMENT =
 TESTS_ENVIRONMENT += PATH=$(top_builddir)/src$(PATH_SEPARATOR)$$PATH
@@ -17,8 +21,10 @@ TEST_LOG_COMPILER = $(BASH)
 TESTS = \
 	00_runnable.test \
 	01_engine-cache.test \
+	01_engine-cache-golden.test \
 	01_engine-charset.test \
 	01_engine-cmdline.test \
+	01_engine-doitlog.test \
 	01_engine-entities.test \
 	01_engine-filter.test \
 	01_engine-hashtable.test \

tests/Makefile.in

@@ -1,907 +0,0 @@
-# Makefile.in generated by automake 1.17 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2024 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-am__rm_f = rm -f $(am__rm_f_notfound)
-am__rm_rf = rm -rf $(am__rm_f_notfound)
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = tests
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/snprintf.m4 \
-	$(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__tty_colors_dummy = \
-  mgn= red= grn= lgn= blu= brg= std=; \
-  am__color_tests=no
-am__tty_colors = { \
-  $(am__tty_colors_dummy); \
-  if test "X$(AM_COLOR_TESTS)" = Xno; then \
-    am__color_tests=no; \
-  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
-    am__color_tests=yes; \
-  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
-    am__color_tests=yes; \
-  fi; \
-  if test $$am__color_tests = yes; then \
-    red=''; \
-    grn=''; \
-    lgn=''; \
-    blu=''; \
-    mgn=''; \
-    brg=''; \
-    std=''; \
-  fi; \
-}
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-  || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-       $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
-  }
-am__recheck_rx = ^[ 	]*:recheck:[ 	]*
-am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
-am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
-# A command that, given a newline-separated list of test names on the
-# standard input, print the name of the tests that are to be re-run
-# upon "make recheck".
-am__list_recheck_tests = $(AWK) '{ \
-  recheck = 1; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-        { \
-          if ((getline line2 < ($$0 ".log")) < 0) \
-	    recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
-        { \
-          recheck = 0; \
-          break; \
-        } \
-      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
-        { \
-          break; \
-        } \
-    }; \
-  if (recheck) \
-    print $$0; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# A command that, given a newline-separated list of test names on the
-# standard input, create the global log from their .trs and .log files.
-am__create_global_log = $(AWK) ' \
-function fatal(msg) \
-{ \
-  print "fatal: making $@: " msg | "cat >&2"; \
-  exit 1; \
-} \
-function rst_section(header) \
-{ \
-  print header; \
-  len = length(header); \
-  for (i = 1; i <= len; i = i + 1) \
-    printf "="; \
-  printf "\n\n"; \
-} \
-{ \
-  copy_in_global_log = 1; \
-  global_test_result = "RUN"; \
-  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
-    { \
-      if (rc < 0) \
-         fatal("failed to read from " $$0 ".trs"); \
-      if (line ~ /$(am__global_test_result_rx)/) \
-        { \
-          sub("$(am__global_test_result_rx)", "", line); \
-          sub("[ 	]*$$", "", line); \
-          global_test_result = line; \
-        } \
-      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
-        copy_in_global_log = 0; \
-    }; \
-  if (copy_in_global_log) \
-    { \
-      rst_section(global_test_result ": " $$0); \
-      while ((rc = (getline line < ($$0 ".log"))) != 0) \
-      { \
-        if (rc < 0) \
-          fatal("failed to read from " $$0 ".log"); \
-        print line; \
-      }; \
-      printf "\n"; \
-    }; \
-  close ($$0 ".trs"); \
-  close ($$0 ".log"); \
-}'
-# Restructured Text title.
-am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
-# Solaris 10 'make', and several other traditional 'make' implementations,
-# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
-# by disabling -e (using the XSI extension "set +e") if it's set.
-am__sh_e_setup = case $$- in *e*) set +e;; esac
-# Default flags passed to test drivers.
-am__common_driver_flags = \
-  --color-tests "$$am__color_tests" \
-  $$am__collect_skipped_logs \
-  --enable-hard-errors "$$am__enable_hard_errors" \
-  --expect-failure "$$am__expect_failure"
-# To be inserted before the command running the test.  Creates the
-# directory for the log if needed.  Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log.  Executes the
-# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
-# will run the test scripts (or their associated LOG_COMPILER, if
-# thy have one).
-am__check_pre = \
-$(am__sh_e_setup);					\
-$(am__vpath_adj_setup) $(am__vpath_adj)			\
-$(am__tty_colors);					\
-srcdir=$(srcdir); export srcdir;			\
-case "$@" in						\
-  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
-    *) am__odir=.;; 					\
-esac;							\
-test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
-  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
-if test -f "./$$f"; then dir=./;			\
-elif test -f "$$f"; then dir=;				\
-else dir="$(srcdir)/"; fi;				\
-tst=$$dir$$f; log='$@'; 				\
-if test -n '$(IGNORE_SKIPPED_LOGS)'; then		\
-  am__collect_skipped_logs='--collect-skipped-logs no';	\
-else							\
-  am__collect_skipped_logs='';				\
-fi;							\
-if test -n '$(DISABLE_HARD_ERRORS)'; then		\
-  am__enable_hard_errors=no; 				\
-else							\
-  am__enable_hard_errors=yes; 				\
-fi; 							\
-case " $(XFAIL_TESTS) " in				\
-  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
-    am__expect_failure=yes;;				\
-  *)							\
-    am__expect_failure=no;;				\
-esac; 							\
-$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
-# A shell command to get the names of the tests scripts with any registered
-# extension removed (i.e., equivalently, the names of the test logs, with
-# the '.log' extension removed).  The result is saved in the shell variable
-# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
-# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
-# since that might cause problem with VPATH rewrites for suffix-less tests.
-# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
-am__set_TESTS_bases = \
-  bases='$(TEST_LOGS)'; \
-  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
-  bases=`echo $$bases`
-AM_TESTSUITE_SUMMARY_HEADER = ' for $(PACKAGE_STRING)'
-RECHECK_LOGS = $(TEST_LOGS)
-AM_RECURSIVE_TARGETS = check recheck
-TEST_SUITE_LOG = test-suite.log
-am__test_logs1 = $(TESTS:=.log)
-am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
-TEST_LOGS = $(am__test_logs2:.test.log=.log)
-TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
-TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
-	$(TEST_LOG_FLAGS)
-am__set_b = \
-  case '$@' in \
-    */*) \
-      case '$*' in \
-        */*) b='$*';; \
-          *) b=`echo '$@' | sed 's/\.log$$//'`; \
-       esac;; \
-    *) \
-      b='$*';; \
-  esac
-am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/test-driver
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_CFLAGS = @AM_CFLAGS@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BASH = @BASH@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CFLAGS_PIE = @CFLAGS_PIE@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPPFLAGS = @CPPFLAGS@
-CSCOPE = @CSCOPE@
-CTAGS = @CTAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFAULT_CFLAGS = @DEFAULT_CFLAGS@
-DEFAULT_LDFLAGS = @DEFAULT_LDFLAGS@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DL_LIBS = @DL_LIBS@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-ETAGS = @ETAGS@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-FILECMD = @FILECMD@
-GREP = @GREP@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-HTTPS_SUPPORT = @HTTPS_SUPPORT@
-ICONV_LIBS = @ICONV_LIBS@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LDFLAGS_PIE = @LDFLAGS_PIE@
-LFS_FLAG = @LFS_FLAG@
-LIBC_FORCE_LINK = @LIBC_FORCE_LINK@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_CV_OBJDIR = @LT_CV_OBJDIR@
-LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-ONLINE_UNIT_TESTS = @ONLINE_UNIT_TESTS@
-OPENSSL_LIBS = @OPENSSL_LIBS@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SHLIBPATH_VAR = @SHLIBPATH_VAR@
-SOCKET_LIBS = @SOCKET_LIBS@
-STRIP = @STRIP@
-THREADS_CFLAGS = @THREADS_CFLAGS@
-THREADS_LIBS = @THREADS_LIBS@
-V6_FLAG = @V6_FLAG@
-VERSION = @VERSION@
-VERSION_INFO = @VERSION_INFO@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__rm_f_notfound = @am__rm_f_notfound@
-am__tar = @am__tar@
-am__untar = @am__untar@
-am__xargs_n = @am__xargs_n@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-runstatedir = @runstatedir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-EXTRA_DIST = $(TESTS) crawl-test.sh run-all-tests.sh check-network.sh
-# note: libtool should handle that
-### TESTS_ENVIRONMENT += $(SHLIBPATH_VAR)="$(top_builddir)/src/$(LT_CV_OBJDIR)$${$(SHLIBPATH_VAR):+$(PATH_SEPARATOR)}$$$(SHLIBPATH_VAR)"
-TESTS_ENVIRONMENT = PATH=$(top_builddir)/src$(PATH_SEPARATOR)$$PATH \
-	ONLINE_UNIT_TESTS=$(ONLINE_UNIT_TESTS) \
-	HTTPS_SUPPORT=$(HTTPS_SUPPORT) top_srcdir=$(top_srcdir)
-TEST_EXTENSIONS = .test
-# Run each .test through bash instead of execve()ing it. This lets "make check"
-# work when the source tree sits on a noexec filesystem (the driver would
-# otherwise fail with "Permission denied"), and removes any reliance on the
-# scripts' executable bit. The scripts are #!/bin/bash and use bash features.
-TEST_LOG_COMPILER = $(BASH)
-TESTS = \
-	00_runnable.test \
-	01_engine-cache.test \
-	01_engine-charset.test \
-	01_engine-cmdline.test \
-	01_engine-entities.test \
-	01_engine-filter.test \
-	01_engine-hashtable.test \
-	01_engine-idna.test \
-	01_engine-mime.test \
-	01_engine-parse.test \
-	01_engine-rcfile.test \
-	01_engine-simplify.test \
-	01_engine-strsafe.test \
-	02_manpage-regen.test \
-	02_update-cache.test \
-	10_crawl-simple.test \
-	11_crawl-cookies.test \
-	11_crawl-idna.test \
-	11_crawl-international.test \
-	11_crawl-longurl.test \
-	11_crawl-parsing.test \
-	12_crawl_https.test
-
-CLEANFILES = check-network_sh.cache
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .log .test .test$(EXEEXT) .trs
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu tests/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-# Recover from deleted '.trs' file; this should ensure that
-# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-# to avoid problems with "make -n".
-.log.trs:
-	rm -f $< $@
-	$(MAKE) $(AM_MAKEFLAGS) $<
-
-# Leading 'am--fnord' is there to ensure the list of targets does not
-# expand to empty, as could happen e.g. with make check TESTS=''.
-am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-am--force-recheck:
-	@:
-$(TEST_SUITE_LOG): $(TEST_LOGS)
-	@$(am__set_TESTS_bases); \
-	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	redo_bases=`for i in $$bases; do \
-	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-	            done`; \
-	if test -n "$$redo_bases"; then \
-	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	  if $(am__make_dryrun); then :; else \
-	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	  fi; \
-	fi; \
-	if test -n "$$am__remaking_logs"; then \
-	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
-	       "recursion detected" >&2; \
-	elif test -n "$$redo_logs"; then \
-	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
-	fi; \
-	if $(am__make_dryrun); then :; else \
-	  st=0;  \
-	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
-	  for i in $$redo_bases; do \
-	    test -f $$i.trs && test -r $$i.trs \
-	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
-	    test -f $$i.log && test -r $$i.log \
-	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
-	  done; \
-	  test $$st -eq 0 || exit 1; \
-	fi
-	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
-	ws='[ 	]'; \
-	results=`for b in $$bases; do echo $$b.trs; done`; \
-	test -n "$$results" || results=/dev/null; \
-	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
-	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
-	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
-	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
-	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
-	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
-	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
-	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
-	  success=true; \
-	else \
-	  success=false; \
-	fi; \
-	br='==================='; br=$$br$$br$$br$$br; \
-	result_count () \
-	{ \
-	    if test x"$$1" = x"--maybe-color"; then \
-	      maybe_colorize=yes; \
-	    elif test x"$$1" = x"--no-color"; then \
-	      maybe_colorize=no; \
-	    else \
-	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	    fi; \
-	    shift; \
-	    desc=$$1 count=$$2; \
-	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
-	      color_start=$$3 color_end=$$std; \
-	    else \
-	      color_start= color_end=; \
-	    fi; \
-	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	}; \
-	create_testsuite_report () \
-	{ \
-	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	}; \
-	output_system_information () \
-	{ \
-          echo;                                     \
-	  { uname -a | $(AWK) '{                    \
-  printf "System information (uname -a):";          \
-  for (i = 1; i < NF; ++i)                          \
-    {                                               \
-      if (i != 2)                                   \
-        printf " %s", $$i;                          \
-    }                                               \
-  printf "\n";                                      \
-}'; } 2>&1;                                         \
-	  if test -r /etc/os-release; then          \
-	    echo "Distribution information (/etc/os-release):"; \
-	    sed 8q /etc/os-release;                 \
-	  elif test -r /etc/issue; then             \
-	    echo "Distribution information (/etc/issue):";      \
-	    cat /etc/issue;                         \
-	  fi;                                       \
-	}; \
-	please_report () \
-	{ \
-echo "Some test(s) failed.  Please report this to $(PACKAGE_BUGREPORT),";    \
-echo "together with the test-suite.log file (gzipped) and your system";      \
-echo "information.  Thanks.";                                                \
-	}; \
-	{								\
-	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    $(am__rst_title);						\
-	  create_testsuite_report --no-color;				\
-	  output_system_information;                                    \
-	  echo;								\
-	  echo ".. contents:: :depth: 2";				\
-	  echo;								\
-	  for b in $$bases; do echo $$b; done				\
-	    | $(am__create_global_log);					\
-	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
-	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
-	if $$success; then						\
-	  col="$$grn";							\
-	 else								\
-	  col="$$red";							\
-	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
-	fi;								\
-	echo "$${col}$$br$${std}"; 					\
-	echo "$${col}Testsuite summary"$(AM_TESTSUITE_SUMMARY_HEADER)"$${std}";	\
-	echo "$${col}$$br$${std}"; 					\
-	create_testsuite_report --maybe-color;				\
-	echo "$$col$$br$$std";						\
-	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG) for debugging.$${std}";\
-	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    please_report | sed -e "s/^/$${col}/" -e s/'$$'/"$${std}"/; \
-	  fi;								\
-	  echo "$$col$$br$$std";					\
-	fi;								\
-	$$success || exit 1
-
-check-TESTS: 
-	@$(am__rm_f) $(RECHECK_LOGS)
-	@$(am__rm_f) $(RECHECK_LOGS:.log=.trs)
-	@$(am__rm_f) $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
-	exit $$?;
-recheck: all 
-	@$(am__rm_f) $(TEST_SUITE_LOG)
-	@set +e; $(am__set_TESTS_bases); \
-	bases=`for i in $$bases; do echo $$i; done \
-	         | $(am__list_recheck_tests)` || exit 1; \
-	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	log_list=`echo $$log_list`; \
-	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
-	        am__force_recheck=am--force-recheck \
-	        TEST_LOGS="$$log_list"; \
-	exit $$?
-.test.log:
-	@p='$<'; \
-	$(am__set_b); \
-	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
-	--log-file $$b.log --trs-file $$b.trs \
-	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
-	"$$tst" $(AM_TESTS_FD_REDIRECT)
-@am__EXEEXT_TRUE@.test$(EXEEXT).log:
-@am__EXEEXT_TRUE@	@p='$<'; \
-@am__EXEEXT_TRUE@	$(am__set_b); \
-@am__EXEEXT_TRUE@	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
-@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
-@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
-@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
-distdir: $(BUILT_SOURCES)
-	$(MAKE) $(AM_MAKEFLAGS) distdir-am
-
-distdir-am: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-	-$(am__rm_f) $(TEST_LOGS)
-	-$(am__rm_f) $(TEST_LOGS:.log=.trs)
-	-$(am__rm_f) $(TEST_SUITE_LOG)
-
-clean-generic:
-	-$(am__rm_f) $(CLEANFILES)
-
-distclean-generic:
-	-$(am__rm_f) $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: all all-am check check-TESTS check-am clean clean-generic \
-	clean-libtool cscopelist-am ctags-am distclean \
-	distclean-generic distclean-libtool distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool pdf pdf-am ps ps-am recheck tags-am \
-	uninstall uninstall-am
-
-.PRECIOUS: Makefile
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
-
-# Tell GNU make to disable its built-in pattern rules.
-%:: %,v
-%:: RCS/%,v
-%:: RCS/%
-%:: s.%
-%:: SCCS/s.%