build: add regen target for html/httrack.man.html

The rendered HTML manual had no regeneration path. Add regen-man-html,
which runs groff's html device over httrack.1, alongside the existing
regen-man target.

.github/workflows/ci.yml

@@ -0,0 +1,87 @@
+# Build and test on x86-64 and arm64, and lint the shell scripts.
+name: CI
+
+on:
+  push:
+    branches: [master]
+  pull_request:
+  workflow_dispatch:
+
+# Least privilege: the workflow only needs to read the repo.
+permissions:
+  contents: read
+
+# Cancel superseded runs on the same branch or PR.
+concurrency:
+  group: ci-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  build:
+    name: build (${{ matrix.arch }}, ${{ matrix.cc }})
+    runs-on: ${{ matrix.runner }}
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - { arch: x86-64, runner: ubuntu-24.04, cc: gcc }
+          - { arch: x86-64, runner: ubuntu-24.04, cc: clang }
+          - { arch: arm64, runner: ubuntu-24.04-arm, cc: gcc }
+          - { arch: arm64, runner: ubuntu-24.04-arm, cc: clang }
+    env:
+      CC: ${{ matrix.cc }}
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          submodules: recursive
+
+      - name: Install build dependencies
+        run: |
+          set -euo pipefail
+          sudo apt-get update
+          sudo apt-get install -y --no-install-recommends \
+            build-essential clang autoconf automake libtool autoconf-archive \
+            zlib1g-dev libssl-dev
+
+      - name: Configure
+        run: |
+          set -euo pipefail
+          # autoreconf installs the automake test-driver (not committed) and
+          # validates configure.ac, so "make check" works on a fresh checkout.
+          autoreconf -fi
+          ./configure
+
+      - name: Build
+        run: make -j"$(nproc)"
+
+      - name: Test
+        run: make check
+
+      - name: Print the test log on failure
+        if: failure()
+        run: cat tests/test-suite.log 2>/dev/null || true
+
+  lint:
+    name: lint (shellcheck, shfmt)
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Install linters
+        env:
+          SHFMT_VERSION: v3.8.0
+        run: |
+          set -euo pipefail
+          sudo apt-get update
+          sudo apt-get install -y --no-install-recommends shellcheck
+          # shfmt is not packaged in apt; fetch a pinned release binary.
+          curl -fsSL -o /tmp/shfmt \
+            "https://github.com/mvdan/sh/releases/download/${SHFMT_VERSION}/shfmt_${SHFMT_VERSION}_linux_$(dpkg --print-architecture)"
+          sudo install -m 0755 /tmp/shfmt /usr/local/bin/shfmt
+
+      # Lint the scripts we maintain; the legacy scripts are a separate cleanup.
+      - name: shellcheck
+        run: shellcheck man/makeman.sh tools/mkdeb.sh tests/*.test tests/check-network.sh
+
+      - name: shfmt
+        run: shfmt -d -i 4 man/makeman.sh tools/mkdeb.sh

.gitmodules

@@ -0,0 +1,3 @@
+[submodule "src/coucal"]
+	path = src/coucal
+	url = https://github.com/xroche/coucal.git

ChangeLog

@@ -0,0 +1 @@
+history.txt

INSTALL

@@ -1,8 +1,8 @@
 Installation Instructions
 *************************
 
-Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
-Inc.
+   Copyright (C) 1994-1996, 1999-2002, 2004-2017, 2020-2021 Free
+Software Foundation, Inc.
 
    Copying and distribution of this file, with or without modification,
 are permitted in any medium without royalty provided the copyright
@@ -12,97 +12,96 @@ without warranty of any kind.
 Basic Installation
 ==================
 
-   Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package.  The following
-more-detailed instructions are generic; see the `README' file for
+   Briefly, the shell command './configure && make && make install'
+should configure, build, and install this package.  The following
+more-detailed instructions are generic; see the 'README' file for
 instructions specific to this package.  Some packages provide this
-`INSTALL' file but do not implement all of the features documented
+'INSTALL' file but do not implement all of the features documented
 below.  The lack of an optional feature in a given package is not
 necessarily a bug.  More recommendations for GNU packages can be found
 in *note Makefile Conventions: (standards)Makefile Conventions.
 
-   The `configure' shell script attempts to guess correct values for
+   The 'configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
+those values to create a 'Makefile' in each directory of the package.
+It may also create one or more '.h' files containing system-dependent
+definitions.  Finally, it creates a shell script 'config.status' that
 you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
+file 'config.log' containing compiler output (useful mainly for
+debugging 'configure').
 
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
+   It can also use an optional file (typically called 'config.cache' and
+enabled with '--cache-file=config.cache' or simply '-C') that saves the
+results of its tests to speed up reconfiguring.  Caching is disabled by
+default to prevent problems with accidental use of stale cache files.
 
    If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
+to figure out how 'configure' could check whether to do them, and mail
+diffs or instructions to the address given in the 'README' so they can
 be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
+some point 'config.cache' contains results you don't want to keep, you
 may remove or edit it.
 
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
+   The file 'configure.ac' (or 'configure.in') is used to create
+'configure' by a program called 'autoconf'.  You need 'configure.ac' if
+you want to change it or regenerate 'configure' using a newer version of
+'autoconf'.
 
    The simplest way to compile this package is:
 
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.
+  1. 'cd' to the directory containing the package's source code and type
+     './configure' to configure the package for your system.
 
-     Running `configure' might take a while.  While running, it prints
+     Running 'configure' might take a while.  While running, it prints
      some messages telling which features it is checking for.
 
-  2. Type `make' to compile the package.
+  2. Type 'make' to compile the package.
 
-  3. Optionally, type `make check' to run any self-tests that come with
+  3. Optionally, type 'make check' to run any self-tests that come with
      the package, generally using the just-built uninstalled binaries.
 
-  4. Type `make install' to install the programs and any data files and
+  4. Type 'make install' to install the programs and any data files and
      documentation.  When installing into a prefix owned by root, it is
      recommended that the package be configured and built as a regular
-     user, and only the `make install' phase executed with root
+     user, and only the 'make install' phase executed with root
      privileges.
 
-  5. Optionally, type `make installcheck' to repeat any self-tests, but
+  5. Optionally, type 'make installcheck' to repeat any self-tests, but
      this time using the binaries in their final installed location.
      This target does not install anything.  Running this target as a
-     regular user, particularly if the prior `make install' required
+     regular user, particularly if the prior 'make install' required
      root privileges, verifies that the installation completed
      correctly.
 
   6. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
+     source code directory by typing 'make clean'.  To also remove the
+     files that 'configure' created (so you can compile the package for
+     a different kind of computer), type 'make distclean'.  There is
+     also a 'make maintainer-clean' target, but that is intended mainly
      for the package's developers.  If you use it, you may have to get
      all sorts of other programs in order to regenerate files that came
      with the distribution.
 
-  7. Often, you can also type `make uninstall' to remove the installed
+  7. Often, you can also type 'make uninstall' to remove the installed
      files again.  In practice, not all packages have tested that
      uninstallation works correctly, even though it is required by the
      GNU Coding Standards.
 
-  8. Some packages, particularly those that use Automake, provide `make
+  8. Some packages, particularly those that use Automake, provide 'make
      distcheck', which can by used by developers to test that all other
-     targets like `make install' and `make uninstall' work correctly.
+     targets like 'make install' and 'make uninstall' work correctly.
      This target is generally not run by end users.
 
 Compilers and Options
 =====================
 
    Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
+the 'configure' script does not know about.  Run './configure --help'
 for details on some of the pertinent environment variables.
 
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
+   You can give 'configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here is
+an example:
 
      ./configure CC=c99 CFLAGS=-g LIBS=-lposix
 
@@ -113,21 +112,21 @@ Compiling For Multiple Architectures
 
    You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you can use GNU `make'.  `cd' to the
+own directory.  To do this, you can use GNU 'make'.  'cd' to the
 directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.  This
-is known as a "VPATH" build.
+the 'configure' script.  'configure' automatically checks for the source
+code in the directory that 'configure' is in and in '..'.  This is known
+as a "VPATH" build.
 
-   With a non-GNU `make', it is safer to compile the package for one
+   With a non-GNU 'make', it is safer to compile the package for one
 architecture at a time in the source code directory.  After you have
-installed the package for one architecture, use `make distclean' before
+installed the package for one architecture, use 'make distclean' before
 reconfiguring for another architecture.
 
    On MacOS X 10.5 and later systems, you can create libraries and
 executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor.  Like
+"universal" binaries--by specifying multiple '-arch' options to the
+compiler but only a single '-arch' option to the preprocessor.  Like
 this:
 
      ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
@@ -136,105 +135,104 @@ this:
 
    This is not guaranteed to produce working output in all cases, you
 may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
+using the 'lipo' tool if you have problems.
 
 Installation Names
 ==================
 
-   By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
+   By default, 'make install' installs the package's commands under
+'/usr/local/bin', include files under '/usr/local/include', etc.  You
+can specify an installation prefix other than '/usr/local' by giving
+'configure' the option '--prefix=PREFIX', where PREFIX must be an
 absolute file name.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+pass the option '--exec-prefix=PREFIX' to 'configure', the package uses
 PREFIX as the prefix for installing programs and libraries.
 Documentation and other data files still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.  In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
+options like '--bindir=DIR' to specify different values for particular
+kinds of files.  Run 'configure --help' for a list of the directories
+you can set and what kinds of files go in them.  In general, the default
+for these options is expressed in terms of '${prefix}', so that
+specifying just '--prefix' will affect all of the other directory
 specifications that were not explicitly provided.
 
    The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
+correct locations to 'configure'; however, many packages provide one or
 both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
+'make install' command line to change installation locations without
 having to reconfigure or recompile.
 
    The first method involves providing an override variable for each
-affected directory.  For example, `make install
+affected directory.  For example, 'make install
 prefix=/alternate/directory' will choose an alternate location for all
 directory configuration variables that were expressed in terms of
-`${prefix}'.  Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated.  The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
+'${prefix}'.  Any directories that were specified during 'configure',
+but not in terms of '${prefix}', must each be overridden at install time
+for the entire installation to be relocated.  The approach of makefile
+variable overrides for each directory variable is required by the GNU
+Coding Standards, and ideally causes no recompilation.  However, some
+platforms have known limitations with the semantics of shared libraries
+that end up requiring recompilation when using this method, particularly
+noticeable in packages that use GNU Libtool.
 
-   The second method involves providing the `DESTDIR' variable.  For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names.  The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
+   The second method involves providing the 'DESTDIR' variable.  For
+example, 'make install DESTDIR=/alternate/directory' will prepend
+'/alternate/directory' before all installation names.  The approach of
+'DESTDIR' overrides is not required by the GNU Coding Standards, and
 does not work on platforms that have drive letters.  On the other hand,
 it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
+when some directory options were not specified in terms of '${prefix}'
+at 'configure' time.
 
 Optional Features
 =================
 
    If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+with an extra prefix or suffix on their names by giving 'configure' the
+option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'.
 
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
+   Some packages pay attention to '--enable-FEATURE' options to
+'configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to '--with-PACKAGE' options, where PACKAGE
+is something like 'gnu-as' or 'x' (for the X Window System).  The
+'README' should mention any '--enable-' and '--with-' options that the
 package recognizes.
 
-   For packages that use the X Window System, `configure' can usually
+   For packages that use the X Window System, 'configure' can usually
 find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
+you can use the 'configure' options '--x-includes=DIR' and
+'--x-libraries=DIR' to specify their locations.
 
    Some packages offer the ability to configure how verbose the
-execution of `make' will be.  For these packages, running `./configure
+execution of 'make' will be.  For these packages, running './configure
 --enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
+overridden with 'make V=1'; while running './configure
 --disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
+overridden with 'make V=0'.
 
 Particular systems
 ==================
 
-   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
-CC is not installed, it is recommended to use the following options in
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU CC
+is not installed, it is recommended to use the following options in
 order to use an ANSI C compiler:
 
      ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
 
 and if that doesn't work, install pre-built binaries of GCC for HP-UX.
 
-   HP-UX `make' updates targets which have the same time stamps as
-their prerequisites, which makes it generally unusable when shipped
-generated files such as `configure' are involved.  Use GNU `make'
-instead.
+   HP-UX 'make' updates targets which have the same timestamps as their
+prerequisites, which makes it generally unusable when shipped generated
+files such as 'configure' are involved.  Use GNU 'make' instead.
 
    On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
-a workaround.  If GNU CC is not installed, it is therefore recommended
-to try
+parse its '<wchar.h>' header file.  The option '-nodtk' can be used as a
+workaround.  If GNU CC is not installed, it is therefore recommended to
+try
 
      ./configure CC="cc"
 
@@ -242,26 +240,26 @@ and if that doesn't work, try
 
      ./configure CC="cc -nodtk"
 
-   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
+   On Solaris, don't put '/usr/ucb' early in your 'PATH'.  This
 directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
+these programs are available in '/usr/bin'.  So, if you need '/usr/ucb'
+in your 'PATH', put it _after_ '/usr/bin'.
 
-   On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'.  It is recommended to use the following options:
+   On Haiku, software installed for all users goes in '/boot/common',
+not '/usr/local'.  It is recommended to use the following options:
 
      ./configure --prefix=/boot/common
 
 Specifying the System Type
 ==========================
 
-   There may be some features `configure' cannot figure out
+   There may be some features 'configure' cannot figure out
 automatically, but needs to determine by the type of machine the package
 will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
+_same_ architectures, 'configure' can figure that out, but if it prints
 a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
+'--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as 'sun4', or a canonical name which has the form:
 
      CPU-COMPANY-SYSTEM
 
@@ -270,101 +268,101 @@ where SYSTEM can have one of these forms:
      OS
      KERNEL-OS
 
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
+   See the file 'config.sub' for the possible values of each field.  If
+'config.sub' isn't included in this package, then this package doesn't
 need to know the machine type.
 
    If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
+use the option '--target=TYPE' to select the type of system they will
 produce code for.
 
    If you want to _use_ a cross compiler, that generates code for a
 platform different from the build platform, you should specify the
 "host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
+eventually be run) with '--host=TYPE'.
 
 Sharing Defaults
 ================
 
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
+   If you want to set default values for 'configure' scripts to share,
+you can create a site shell script called 'config.site' that gives
+default values for variables like 'CC', 'cache_file', and 'prefix'.
+'configure' looks for 'PREFIX/share/config.site' if it exists, then
+'PREFIX/etc/config.site' if it exists.  Or, you can set the
+'CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all 'configure' scripts look for a site script.
 
 Defining Variables
 ==================
 
    Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
+environment passed to 'configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
+them in the 'configure' command line, using 'VAR=value'.  For example:
 
      ./configure CC=/usr/local2/bin/gcc
 
-causes the specified `gcc' to be used as the C compiler (unless it is
+causes the specified 'gcc' to be used as the C compiler (unless it is
 overridden in the site shell script).
 
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug.  Until the bug is fixed you can use this workaround:
+Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an
+Autoconf limitation.  Until the limitation is lifted, you can use this
+workaround:
 
-     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+     CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
 
-`configure' Invocation
+'configure' Invocation
 ======================
 
-   `configure' recognizes the following options to control how it
+   'configure' recognizes the following options to control how it
 operates.
 
-`--help'
-`-h'
-     Print a summary of all of the options to `configure', and exit.
+'--help'
+'-h'
+     Print a summary of all of the options to 'configure', and exit.
 
-`--help=short'
-`--help=recursive'
+'--help=short'
+'--help=recursive'
      Print a summary of the options unique to this package's
-     `configure', and exit.  The `short' variant lists options used
-     only in the top level, while the `recursive' variant lists options
-     also present in any nested packages.
+     'configure', and exit.  The 'short' variant lists options used only
+     in the top level, while the 'recursive' variant lists options also
+     present in any nested packages.
 
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
+'--version'
+'-V'
+     Print the version of Autoconf used to generate the 'configure'
      script, and exit.
 
-`--cache-file=FILE'
+'--cache-file=FILE'
      Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     traditionally 'config.cache'.  FILE defaults to '/dev/null' to
      disable caching.
 
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
+'--config-cache'
+'-C'
+     Alias for '--cache-file=config.cache'.
 
-`--quiet'
-`--silent'
-`-q'
+'--quiet'
+'--silent'
+'-q'
      Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
+     suppress all normal output, redirect it to '/dev/null' (any error
      messages will still be shown).
 
-`--srcdir=DIR'
+'--srcdir=DIR'
      Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
+     'configure' can determine that directory automatically.
 
-`--prefix=DIR'
-     Use DIR as the installation prefix.  *note Installation Names::
-     for more details, including other options available for fine-tuning
-     the installation locations.
+'--prefix=DIR'
+     Use DIR as the installation prefix.  *note Installation Names:: for
+     more details, including other options available for fine-tuning the
+     installation locations.
 
-`--no-create'
-`-n'
+'--no-create'
+'-n'
      Run the configure checks, but stop before creating any output
      files.
 
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
-
+'configure' also accepts some other, not widely useful, options.  Run
+'configure --help' for more details.

INSTALL.Linux

@@ -1,7 +1,7 @@
 HTTrack Website Copier - Install notes
 --------------------------------------
 
-On most systems (including GNU/Linux), installing can be easily acheived using the following command:
+On most systems (including GNU/Linux), installing can be easily achieved using the following command:
 
 ./configure && make && make install
 -or- (if not compiling as root)

Makefile.am

@@ -5,4 +5,13 @@ ACLOCAL_AMFLAGS = -I m4
 
 EXTRA_DIST = INSTALL.Linux \
 		gpl-fr.txt license.txt greetings.txt history.txt \
-		httrack-doc.html lang.def README.md
+		httrack-doc.html lang.def README.md tools/mkdeb.sh
+
+# Build the signed Debian packages from a clean source export. Pass the signing
+# key and other options through DEB_FLAGS, e.g.:
+#   make deb DEB_FLAGS="--key BB71C7E6CB1AD8FAF53FE42A60C3AA7180598EFB"
+# See tools/mkdeb.sh --help for all options.
+DEB_FLAGS =
+deb:
+	$(SHELL) $(top_srcdir)/tools/mkdeb.sh $(DEB_FLAGS)
+.PHONY: deb

Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.16.5 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2021 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,61 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
     esac; \
-    test $$am__dry = yes; \
-  }
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -51,34 +88,44 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
-	$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
-	compile config.guess config.sub depcomp install-sh ltmain.sh \
-	missing
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
 	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
 	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/snprintf.m4 \
-	$(top_srcdir)/configure.ac
+	$(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+	$(am__configure_deps) $(am__DIST_COMMON)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-dvi-recursive install-exec-recursive \
-	install-html-recursive install-info-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
-	ps-recursive uninstall-recursive
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
 am__can_run_installinfo = \
   case $$AM_UPDATE_INFO_DIR in \
     n|no|NO) false;; \
@@ -86,12 +133,34 @@ am__can_run_installinfo = \
   esac
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-	distdir dist dist-all distcheck
-ETAGS = etags
-CTAGS = ctags
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	cscope distdir distdir-am dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
+	config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in AUTHORS \
+	COPYING ChangeLog INSTALL NEWS README compile config.guess \
+	config.sub install-sh ltmain.sh missing
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
@@ -101,6 +170,7 @@ am__remove_distdir = \
       && rm -rf "$(distdir)" \
       || { sleep 5 && rm -rf "$(distdir)"; }; \
   else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
 am__relativize = \
   dir0=`pwd`; \
   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
@@ -128,6 +198,9 @@ am__relativize = \
   reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz
 GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
+# Exists only to be overridden by the user if desired.
+AM_DISTCHECK_DVI_TARGET = dvi
 distuninstallcheck_listfiles = find . -type f -print
 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
@@ -135,6 +208,7 @@ distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
 AM_CFLAGS = @AM_CFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
@@ -143,9 +217,11 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
+CFLAGS_PIE = @CFLAGS_PIE@
 CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
+CSCOPE = @CSCOPE@
+CTAGS = @CTAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFAULT_CFLAGS = @DEFAULT_CFLAGS@
 DEFAULT_LDFLAGS = @DEFAULT_LDFLAGS@
@@ -159,8 +235,10 @@ ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
+ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
+FILECMD = @FILECMD@
 GREP = @GREP@
 HAVE_VISIBILITY = @HAVE_VISIBILITY@
 HTTPS_SUPPORT = @HTTPS_SUPPORT@
@@ -172,6 +250,7 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
+LDFLAGS_PIE = @LDFLAGS_PIE@
 LFS_FLAG = @LFS_FLAG@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
@@ -180,6 +259,7 @@ LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_CV_OBJDIR = @LT_CV_OBJDIR@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -256,6 +336,7 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
+runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
@@ -268,8 +349,14 @@ SUBDIRS = src man m4 libtest templates lang html tests
 ACLOCAL_AMFLAGS = -I m4
 EXTRA_DIST = INSTALL.Linux \
 		gpl-fr.txt license.txt greetings.txt history.txt \
-		httrack-doc.html lang.def README.md
+		httrack-doc.html lang.def README.md tools/mkdeb.sh
 
+
+# Build the signed Debian packages from a clean source export. Pass the signing
+# key and other options through DEB_FLAGS, e.g.:
+#   make deb DEB_FLAGS="--key BB71C7E6CB1AD8FAF53FE42A60C3AA7180598EFB"
+# See tools/mkdeb.sh --help for all options.
+DEB_FLAGS = 
 all: config.h
 	$(MAKE) $(AM_MAKEFLAGS) all-recursive
 
@@ -289,15 +376,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    echo ' $(SHELL) ./config.status'; \
 	    $(SHELL) ./config.status;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
 	esac;
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -310,8 +396,8 @@ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 $(am__aclocal_m4_deps):
 
 config.h: stamp-h1
-	@if test ! -f $@; then rm -f stamp-h1; else :; fi
-	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
+	@test -f $@ || rm -f stamp-h1
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
@@ -334,22 +420,25 @@ distclean-libtool:
 	-rm -f libtool config.lt
 
 # This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
 	  echo "Making $$target in $$subdir"; \
 	  if test "$$subdir" = "."; then \
 	    dot_seen=yes; \
@@ -364,57 +453,12 @@ $(RECURSIVE_TARGETS):
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-$(RECURSIVE_CLEAN_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
@@ -430,12 +474,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	$(am__define_uniq_tagged_files); \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -447,15 +486,11 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -464,11 +499,35 @@ GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
 
-distdir: $(DISTFILES)
+distdir-am: $(DISTFILES)
 	$(am__remove_distdir)
 	test -d "$(distdir)" || mkdir "$(distdir)"
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
@@ -533,41 +592,47 @@ distdir: $(DISTFILES)
 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
+	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
+	$(am__post_remove_distdir)
 
 dist-bzip2: distdir
 	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-lzip: distdir
 	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
-	$(am__remove_distdir)
-
-dist-lzma: distdir
-	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-xz: distdir
 	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
+
+dist-zstd: distdir
+	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
+	$(am__post_remove_distdir)
 
 dist-tarZ: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
+	$(am__post_remove_distdir)
 
 dist-zip: distdir
 	-rm -f $(distdir).zip
 	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
-dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
 # it guarantees that the distribution is self-contained by making another
@@ -575,11 +640,9 @@ dist dist-all: distdir
 distcheck: dist
 	case '$(DIST_ARCHIVES)' in \
 	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lzma*) \
-	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
 	*.tar.lz*) \
 	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 	*.tar.xz*) \
@@ -587,24 +650,27 @@ distcheck: dist
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
+	*.tar.zst*) \
+	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
 	esac
-	chmod -R a-w $(distdir); chmod u+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
+	chmod -R a-w $(distdir)
+	chmod u+w $(distdir)
+	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
 	chmod a-w $(distdir)
 	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	  && $(am__cd) $(distdir)/_build/sub \
+	  && ../../configure \
 	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	    --srcdir=../.. --prefix="$$dc_install_base" \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
 	  && $(MAKE) $(AM_MAKEFLAGS) check \
 	  && $(MAKE) $(AM_MAKEFLAGS) install \
 	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
@@ -625,7 +691,7 @@ distcheck: dist
 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 	  && cd "$$am__cwd" \
 	  || exit 1
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
@@ -760,25 +826,30 @@ ps-am:
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
-	ctags-recursive install-am install-strip tags-recursive
+.MAKE: $(am__recursive_targets) all install-am install-strip
 
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	all all-am am--refresh check check-am clean clean-generic \
-	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
-	dist-gzip dist-lzip dist-lzma dist-shar dist-tarZ dist-xz \
-	dist-zip distcheck distclean distclean-generic distclean-hdr \
-	distclean-libtool distclean-tags distcleancheck distdir \
-	distuninstallcheck dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	installdirs-am maintainer-clean maintainer-clean-generic \
-	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
-	ps ps-am tags tags-recursive uninstall uninstall-am
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+	am--refresh check check-am clean clean-cscope clean-generic \
+	clean-libtool cscope cscopelist-am ctags ctags-am dist \
+	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
+	dist-xz dist-zip dist-zstd distcheck distclean \
+	distclean-generic distclean-hdr distclean-libtool \
+	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs installdirs-am \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am
 
+.PRECIOUS: Makefile
+
+deb:
+	$(SHELL) $(top_srcdir)/tools/mkdeb.sh $(DEB_FLAGS)
+.PHONY: deb
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

NEWS

@@ -0,0 +1 @@
+history.txt

README

@@ -1,9 +1,16 @@
 HTTrack Website Copier, Offline Browser for Windows and Unix
-Copyright (C) 1998-2015 Xavier Roche and other contributors
+Copyright (C) 1998-2017 Xavier Roche and other contributors
 
 Welcome to HTTrack Website Copier!
 
 
+Ethical use:
+
+We ask that you do not use HTTrack to grab email addresses or to collect any
+other private information on people. This would disgrace our work and the many
+hours we have spent on it.
+
+
 Information:
 
 The folder html/ contains the documentation
@@ -45,7 +52,7 @@ These options may not be necessary for a normal usage. But they can solve severa
 
 - If you need more than 100,000 links: -#L1000000 (1,000,000 links)
 - If you need more than 500 filters: -#F1000 (1,000 filters)
-- If you need transfer rate statictics every minutes: -#Z
+- If you need transfer rate statistics every minutes: -#Z
 - If you need transfer operations statistics every minutes: -#T
 - If you want log files to be refreshed after every line: -#f
 

README.md

@@ -1,5 +1,8 @@
 # HTTrack Website Copier - Development Repository
 
+[![CI](https://github.com/xroche/httrack/actions/workflows/ci.yml/badge.svg?branch=master)](https://github.com/xroche/httrack/actions/workflows/ci.yml)
+[![License](https://img.shields.io/github/license/xroche/httrack)](COPYING)
+
 ## About
 _Copy websites to your computer (Offline browser)_
 
@@ -20,7 +23,7 @@ http://www.httrack.com/
 
 ## Compile trunk release
 ```sh
-git clone https://github.com/xroche/httrack.git
+git clone https://github.com/xroche/httrack.git --recurse
 cd httrack
 ./configure --prefix=$HOME/usr && make -j8 && make install
 ```

compile

@@ -1,10 +1,9 @@
 #! /bin/sh
 # Wrapper for compilers which do not understand '-c -o'.
 
-scriptversion=2012-03-05.13; # UTC
+scriptversion=2018-03-07.03; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009, 2010, 2012 Free
-# Software Foundation, Inc.
+# Copyright (C) 1999-2021 Free Software Foundation, Inc.
 # Written by Tom Tromey <tromey@cygnus.com>.
 #
 # This program is free software; you can redistribute it and/or modify
@@ -18,7 +17,7 @@ scriptversion=2012-03-05.13; # UTC
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -54,7 +53,7 @@ func_file_conv ()
 	  MINGW*)
 	    file_conv=mingw
 	    ;;
-	  CYGWIN*)
+	  CYGWIN* | MSYS*)
 	    file_conv=cygwin
 	    ;;
 	  *)
@@ -68,7 +67,7 @@ func_file_conv ()
 	mingw/*)
 	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
 	  ;;
-	cygwin/*)
+	cygwin/* | msys/*)
 	  file=`cygpath -m "$file" || echo "$file"`
 	  ;;
 	wine/*)
@@ -113,6 +112,11 @@ func_cl_dashl ()
       lib=$dir/$lib.lib
       break
     fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
   done
   IFS=$save_IFS
 
@@ -251,7 +255,8 @@ EOF
     echo "compile $scriptversion"
     exit $?
     ;;
-  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
+  icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
     func_cl_wrapper "$@"      # Doesn't return...
     ;;
 esac
@@ -335,9 +340,9 @@ exit $ret
 # Local Variables:
 # mode: shell-script
 # sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
 # time-stamp-end: "; # UTC"
 # End:

config.h.in

@@ -3,9 +3,6 @@
 /* Check for dlopen in c */
 #undef DLLIB
 
-/* Check for ftime */
-#undef FTIME
-
 /* Define if pointers to integers require aligned access */
 #undef HAVE_ALIGNED_ACCESS_REQUIRED
 
@@ -21,8 +18,8 @@
 /* Define to 1 if you have the `z' library (-lz). */
 #undef HAVE_LIBZ
 
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
+/* Define to 1 if you have the <minix/config.h> header file. */
+#undef HAVE_MINIX_CONFIG_H
 
 /* Define to 1 if you have the `snprintf' function. */
 #undef HAVE_SNPRINTF
@@ -30,6 +27,9 @@
 /* Define to 1 if you have the <stdint.h> header file. */
 #undef HAVE_STDINT_H
 
+/* Define to 1 if you have the <stdio.h> header file. */
+#undef HAVE_STDIO_H
+
 /* Define to 1 if you have the <stdlib.h> header file. */
 #undef HAVE_STDLIB_H
 
@@ -58,6 +58,9 @@
 /* Define to 1 if you have the `vsnprintf' function. */
 #undef HAVE_VSNPRINTF
 
+/* Define to 1 if you have the <wchar.h> header file. */
+#undef HAVE_WCHAR_H
+
 /* Check for in_addr_t */
 #undef HTS_DO_NOT_REDEFINE_in_addr_t
 
@@ -76,13 +79,9 @@
 /* Check for libsocket */
 #undef LIBSOCKET
 
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
-   */
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
 #undef LT_OBJDIR
 
-/* Define to 1 if your C compiler doesn't accept -c and -o together. */
-#undef NO_MINUS_C_MINUS_O
-
 /* Name of package */
 #undef PACKAGE
 
@@ -110,13 +109,12 @@
 /* Check for setuid */
 #undef SETUID
 
-/* The size of `long', as computed by sizeof. */
-#undef SIZEOF_LONG
-
 /* The size of `long long', as computed by sizeof. */
 #undef SIZEOF_LONG_LONG
 
-/* Define to 1 if you have the ANSI C header files. */
+/* Define to 1 if all of the C90 standard headers exist (not just the ones
+   required in a freestanding environment). This macro is provided for
+   backward compatibility; new code need not use it. */
 #undef STDC_HEADERS
 
 /* Check for pthread in pthreads */
@@ -126,37 +124,93 @@
 #ifndef _ALL_SOURCE
 # undef _ALL_SOURCE
 #endif
+/* Enable general extensions on macOS.  */
+#ifndef _DARWIN_C_SOURCE
+# undef _DARWIN_C_SOURCE
+#endif
+/* Enable general extensions on Solaris.  */
+#ifndef __EXTENSIONS__
+# undef __EXTENSIONS__
+#endif
 /* Enable GNU extensions on systems that have them.  */
 #ifndef _GNU_SOURCE
 # undef _GNU_SOURCE
 #endif
-/* Enable threading extensions on Solaris.  */
+/* Enable X/Open compliant socket functions that do not require linking
+   with -lxnet on HP-UX 11.11.  */
+#ifndef _HPUX_ALT_XOPEN_SOCKET_API
+# undef _HPUX_ALT_XOPEN_SOCKET_API
+#endif
+/* Identify the host operating system as Minix.
+   This macro does not affect the system headers' behavior.
+   A future release of Autoconf may stop defining this macro.  */
+#ifndef _MINIX
+# undef _MINIX
+#endif
+/* Enable general extensions on NetBSD.
+   Enable NetBSD compatibility extensions on Minix.  */
+#ifndef _NETBSD_SOURCE
+# undef _NETBSD_SOURCE
+#endif
+/* Enable OpenBSD compatibility extensions on NetBSD.
+   Oddly enough, this does nothing on OpenBSD.  */
+#ifndef _OPENBSD_SOURCE
+# undef _OPENBSD_SOURCE
+#endif
+/* Define to 1 if needed for POSIX-compatible behavior.  */
+#ifndef _POSIX_SOURCE
+# undef _POSIX_SOURCE
+#endif
+/* Define to 2 if needed for POSIX-compatible behavior.  */
+#ifndef _POSIX_1_SOURCE
+# undef _POSIX_1_SOURCE
+#endif
+/* Enable POSIX-compatible threading on Solaris.  */
 #ifndef _POSIX_PTHREAD_SEMANTICS
 # undef _POSIX_PTHREAD_SEMANTICS
 #endif
+/* Enable extensions specified by ISO/IEC TS 18661-5:2014.  */
+#ifndef __STDC_WANT_IEC_60559_ATTRIBS_EXT__
+# undef __STDC_WANT_IEC_60559_ATTRIBS_EXT__
+#endif
+/* Enable extensions specified by ISO/IEC TS 18661-1:2014.  */
+#ifndef __STDC_WANT_IEC_60559_BFP_EXT__
+# undef __STDC_WANT_IEC_60559_BFP_EXT__
+#endif
+/* Enable extensions specified by ISO/IEC TS 18661-2:2015.  */
+#ifndef __STDC_WANT_IEC_60559_DFP_EXT__
+# undef __STDC_WANT_IEC_60559_DFP_EXT__
+#endif
+/* Enable extensions specified by ISO/IEC TS 18661-4:2015.  */
+#ifndef __STDC_WANT_IEC_60559_FUNCS_EXT__
+# undef __STDC_WANT_IEC_60559_FUNCS_EXT__
+#endif
+/* Enable extensions specified by ISO/IEC TS 18661-3:2015.  */
+#ifndef __STDC_WANT_IEC_60559_TYPES_EXT__
+# undef __STDC_WANT_IEC_60559_TYPES_EXT__
+#endif
+/* Enable extensions specified by ISO/IEC TR 24731-2:2010.  */
+#ifndef __STDC_WANT_LIB_EXT2__
+# undef __STDC_WANT_LIB_EXT2__
+#endif
+/* Enable extensions specified by ISO/IEC 24747:2009.  */
+#ifndef __STDC_WANT_MATH_SPEC_FUNCS__
+# undef __STDC_WANT_MATH_SPEC_FUNCS__
+#endif
 /* Enable extensions on HP NonStop.  */
 #ifndef _TANDEM_SOURCE
 # undef _TANDEM_SOURCE
 #endif
-/* Enable general extensions on Solaris.  */
-#ifndef __EXTENSIONS__
-# undef __EXTENSIONS__
+/* Enable X/Open extensions.  Define to 500 only if necessary
+   to make mbstate_t available.  */
+#ifndef _XOPEN_SOURCE
+# undef _XOPEN_SOURCE
 #endif
 
 
 /* Version number of package */
 #undef VERSION
 
-/* Define to 1 if on MINIX. */
-#undef _MINIX
-
-/* Define to 2 if the system does not provide POSIX.1 features except with
-   this defined. */
-#undef _POSIX_1_SOURCE
-
-/* Define to 1 if you need to in order for `stat' and other things to work. */
-#undef _POSIX_SOURCE
-
 /* in_port_t */
 #undef in_port_t
 

configure.ac

@@ -1,6 +1,6 @@
-AC_PREREQ(2.59)
+AC_PREREQ([2.71])
 
-AC_INIT([httrack], [3.48.21], [roche+packaging@httrack.com], [httrack], [http://www.httrack.com/])
+AC_INIT([httrack], [3.49.8], [roche+packaging@httrack.com], [httrack], [http://www.httrack.com/])
 AC_COPYRIGHT([
 HTTrack Website Copier, Offline Browser for Windows and Unix
 Copyright (C) 1998-2015 Xavier Roche and other contributors
@@ -31,16 +31,24 @@ AC_CONFIG_SRCDIR(src/httrack.c)
 AC_CONFIG_MACRO_DIR([m4])
 AC_CONFIG_HEADERS(config.h)
 AM_INIT_AUTOMAKE([subdir-objects])
-VERSION_INFO="2:48:0"
+VERSION_INFO="2:49:0"
 AM_MAINTAINER_MODE
 AC_USE_SYSTEM_EXTENSIONS
 
 AC_PROG_CC
 AM_PROG_CC_C_O
-AC_STDC_HEADERS
+m4_warn([obsolete],
+[The preprocessor macro `STDC_HEADERS' is obsolete.
+  Except in unusual embedded environments, you can safely include all
+  ISO C90 headers unconditionally.])dnl
+# Autoupdate added the next two lines to ensure that your configure
+# script's behavior did not change.  They are probably safe to remove.
+AC_CHECK_INCLUDES_DEFAULT
+AC_PROG_EGREP
+
 LT_INIT
 AC_PROG_LN_S
-AM_PROG_LIBTOOL
+LT_INIT
 
 # Export LD_LIBRARY_PATH name or equivalent.
 AC_SUBST(SHLIBPATH_VAR,$shlibpath_var)
@@ -74,8 +82,21 @@ AX_CHECK_COMPILE_FLAG([-Wmissing-parameter-type], [DEFAULT_CFLAGS="$DEFAULT_CFLA
 AX_CHECK_COMPILE_FLAG([-Wold-style-definition], [DEFAULT_CFLAGS="$DEFAULT_CFLAGS -Wold-style-definition"])
 AX_CHECK_COMPILE_FLAG([-Wignored-qualifiers], [DEFAULT_CFLAGS="$DEFAULT_CFLAGS -Wignored-qualifiers"])
 AX_CHECK_COMPILE_FLAG([-fstrict-aliasing -Wstrict-aliasing], [DEFAULT_CFLAGS="$DEFAULT_CFLAGS -fstrict-aliasing -Wstrict-aliasing"])
-AX_CHECK_LINK_FLAG([-Wl,--discard-all], [DEFAULT_LDLAGS="$DEFAULT_LDLAGS -Wl,--discard-all"])
-AX_CHECK_LINK_FLAG([-Wl,--no-undefined], [DEFAULT_LDLAGS="$DEFAULT_LDLAGS -Wl,--no-undefined"])
+AX_CHECK_COMPILE_FLAG([-fstack-protector], [DEFAULT_CFLAGS="$DEFAULT_CFLAGS -fstack-protector"])
+AX_CHECK_COMPILE_FLAG([-fstack-clash-protection], [DEFAULT_CFLAGS="$DEFAULT_CFLAGS -fstack-clash-protection"])
+AX_CHECK_COMPILE_FLAG([-fcf-protection], [DEFAULT_CFLAGS="$DEFAULT_CFLAGS -fcf-protection"])
+AX_CHECK_LINK_FLAG([-Wl,--discard-all], [DEFAULT_LDFLAGS="$DEFAULT_LDFLAGS -Wl,--discard-all"])
+AX_CHECK_LINK_FLAG([-Wl,--no-undefined], [DEFAULT_LDFLAGS="$DEFAULT_LDFLAGS -Wl,--no-undefined"])
+AX_CHECK_LINK_FLAG([-Wl,-z,relro,-z,now], [DEFAULT_LDFLAGS="$DEFAULT_LDFLAGS -Wl,-z,relro,-z,now"])
+AX_CHECK_LINK_FLAG([-Wl,-z,noexecstack], [DEFAULT_LDFLAGS="$DEFAULT_LDFLAGS -Wl,-z,noexecstack"])
+
+### PIE
+CFLAGS_PIE=""
+LDFLAGS_PIE=""
+AX_CHECK_COMPILE_FLAG([-fpie -pie], [CFLAGS_PIE="-fpie -pie"])
+AX_CHECK_LINK_FLAG([-pie], [LDFLAGS_PIE="-pie"])
+AC_SUBST([CFLAGS_PIE])
+AC_SUBST([LDFLAGS_PIE])
 
 ## Export all symbols for backtraces
 AX_CHECK_COMPILE_FLAG([-rdynamic], [DEFAULT_CFLAGS="$DEFAULT_CFLAGS -rdynamic"])
@@ -93,8 +114,9 @@ AC_SUBST([AM_CFLAGS])
 #*) AC_DEFINE(HTS_PLATFORM, 3, [Default value used]);;
 #esac
 
-### Check size of long and long long.
-AC_CHECK_SIZEOF(long)
+### Probe long long size for 64-bit integer support. SIZEOF_LONG is not probed:
+### it varies by architecture and would break Multi-Arch co-installation of
+### libhttrack-dev (Debian #1133728). md5.h uses <stdint.h> instead.
 AC_CHECK_SIZEOF(long long)
 
 ### check for in_addr_t
@@ -129,8 +151,7 @@ CHECK_ZLIB()
 ### OpenSSL is explicitly enabled/disabled ?
 AC_MSG_CHECKING(whether to enable https support)
 AC_ARG_ENABLE([https],
-	[AC_HELP_STRING([--enable-https=@<:@yes/no/auto@:>@],
-		[Enable https support @<:@default=yes@:>@])],
+	[AS_HELP_STRING([--enable-https=@<:@yes/no/auto@:>@],[Enable https support @<:@default=yes@:>@])],
 	[
 	case "${enableval}" in
 	no|yes|auto)
@@ -160,7 +181,7 @@ AC_CHECK_LIB(crypto, EVP_get_digestbyname,
 	]
 	)
 LIBS="$LIBS $OPENSSL_LIBS"
-AC_CHECK_LIB(ssl, SSL_library_init,
+AC_CHECK_LIB(ssl, SSL_CTX_new,
 	[
 	OPENSSL_LIBS="$OPENSSL_LIBS -lssl"
 	AC_DEFINE(HTS_USEOPENSSL, 1, [Check for OpenSSL])
@@ -227,10 +248,6 @@ AC_DEFINE(DLLIB, 1,[Check for dlopen in c])], AC_MSG_WARN([*** not found * this
 AC_SUBST(DL_LIBS)
 fi
 
-### Check for ftime
-AC_CHECK_LIB(c, ftime, [
-AC_DEFINE(FTIME, 1,[Check for ftime])], AC_MSG_RESULT([not found]))
-
 ### Check for setuid
 AC_CHECK_LIB(c, setuid, [
 AC_DEFINE(SETUID, 1,[Check for setuid])], AC_MSG_RESULT([not found]))
@@ -245,8 +262,7 @@ AC_DEFINE(HAVE_STRNLEN, 1,[Check for strnlen])], AC_MSG_RESULT([not found]))
 ## Online unit tests
 AC_MSG_CHECKING(whether to enable online unit tests)
 AC_ARG_ENABLE([online-unit-tests],
-	[AC_HELP_STRING([--enable-online-unit-tests=@<:@yes/no/auto@:>@],
-		[Enable online-unit-tests @<:@default=yes@:>@])],
+	[AS_HELP_STRING([--enable-online-unit-tests=@<:@yes/no/auto@:>@],[Enable online-unit-tests @<:@default=yes@:>@])],
 	[
 	case "${enableval}" in
 	no|yes|auto)
@@ -265,7 +281,7 @@ AC_ARG_ENABLE([online-unit-tests],
 AC_SUBST(ONLINE_UNIT_TESTS,$online_unit_tests)
 
 # Final output
-AC_OUTPUT([
+AC_CONFIG_FILES([
 Makefile
 src/Makefile
 man/Makefile
@@ -276,3 +292,4 @@ html/Makefile
 libtest/Makefile
 tests/Makefile
 ])
+AC_OUTPUT

debian/changelog

@@ -1,3 +1,93 @@
+httrack (3.49.8-1) unstable; urgency=medium
+
+  * New upstream release.
+  * Drop the OpenSSL linking exception from the license: OpenSSL 3.0+ is
+    Apache-2.0 and GPL-compatible, so it is no longer needed. httrack is now
+    plain GPL-3.0-or-later. Updated debian/copyright accordingly.
+  * Fix a batch of lintian tags: depend on sensible-utils, point to
+    common-licenses/GPL-3, use a secure version=4 watch file, add
+    Rules-Requires-Root and Vcs-Browser, and override the false-positive
+    source-is-missing on the bundled HTML documentation.
+
+ -- Xavier Roche <xavier@debian.org>  Sun, 07 Jun 2026 14:29:24 +0200
+
+httrack (3.49.7-2) unstable; urgency=medium
+
+  * Bump Standards-Version to 4.7.0 (no changes needed).
+  * Switch to debhelper-compat (= 13); drop the dh-autoreconf and
+    autotools-dev build dependencies.
+
+ -- Xavier Roche <xavier@debian.org>  Sun, 07 Jun 2026 14:13:39 +0200
+
+httrack (3.49.7-1) unstable; urgency=medium
+
+  * New upstream release.
+  * Make config.h architecture-independent for Multi-Arch: same. closes:#1133728
+  * Fix man page rendering of the -%! security warning. closes:#1061053
+
+ -- Xavier Roche <xavier@debian.org>  Sat, 06 Jun 2026 21:03:05 +0200
+
+httrack (3.49.6-1) unstable; urgency=medium
+
+  * Updated to 3.49.6 (3.49-6)
+    Fixed CVE-2017-14062
+
+ -- Xavier Roche <xavier@debian.org>  Tue, 11 Mar 2025 19:43:39 +0100
+
+httrack (3.49.5-1) unstable; urgency=medium
+
+  * Updated to 3.49.5 (3.49-5)
+    Fixed CVE-2023-45853
+
+ -- Xavier Roche <xavier@debian.org>  Sat, 27 Jan 2024 14:30:23 +0100
+
+httrack (3.49.4-1) unstable; urgency=low
+
+  * Updated to 3.49.4 (3.49-4)
+    closes:#1021492
+
+ -- Xavier Roche <xavier@debian.org>  Sat, 14 Jan 2023 17:24:31 +0100
+
+httrack (3.49.3-1) unstable; urgency=low
+
+  * Updated to 3.49.3 (3.49-3)
+    closes:#863028
+
+ -- Xavier Roche <xavier@debian.org>  Thu, 12 Jan 2023 22:10:03 +0100
+
+httrack (3.49.2-1) unstable; urgency=medium
+
+  * Fixed buffer overflow in output option commandline argument (VL-ID 2068) (Hosein Askari)
+
+ -- Xavier Roche <xavier@debian.org>  Sat, 20 May 2017 10:33:35 +0200
+
+httrack (3.49.1-1) unstable; urgency=low
+
+  * Updated to 3.49.1 (3.49-1)
+
+ -- Xavier Roche <xavier@debian.org>  Sat, 01 Apr 2017 22:09:48 +0200
+
+httrack (3.48.24-1) unstable; urgency=low
+
+  * Removed recommends non-existing package (libssl1.0.0)
+    closes:#835258
+
+ -- Xavier Roche <xavier@debian.org>  Wed, 24 Aug 2016 09:04:28 +0200
+
+httrack (3.48.23-1) unstable; urgency=medium
+
+  * Updated to 3.48.23 (3.48-23)
+    closes:#828344
+
+ -- Xavier Roche <xavier@debian.org>  Sun, 26 Jun 2016 14:15:46 +0200
+
+httrack (3.48.22-1) unstable; urgency=medium
+
+  * Updated to 3.48.22 (3.48-22)
+    closes:#804535
+
+ -- Xavier Roche <xavier@debian.org>  Tue, 26 Apr 2016 18:58:27 +0200
+
 httrack (3.48.21-1) unstable; urgency=low
 
   * Updated to 3.48.21 (3.48-21)
@@ -848,7 +938,7 @@ httrack (3.39.6-1) unstable; urgency=low
 
 httrack (3.39.5-1) unstable; urgency=low
 
-  * Updated to 3.39.5 (3.40-alpha-5) 
+  * Updated to 3.39.5 (3.40-alpha-5)
 
  -- Xavier Roche <xavier@debian.org>  Fri, 29 Jul 2005 20:57:44 +0200
 
@@ -1530,4 +1620,3 @@ httrack (3.22-1) unstable; urgency=low
   * Initial Release.
 
  -- Xavier Roche <xavier@debian.org>  Fri, 27 Sep 2002 16:42:25 +0200
-

debian/compat

@@ -1 +0,0 @@
-8

debian/control

@@ -2,14 +2,16 @@ Source: httrack
 Section: web
 Priority: optional
 Maintainer: Xavier Roche <roche@httrack.com>
-Standards-Version: 3.9.5
-Build-Depends: debhelper (>= 8.0.0), dh-autoreconf, autotools-dev, autoconf, autoconf-archive, automake, libtool, zlib1g-dev, libssl-dev
+Standards-Version: 4.7.0
+Build-Depends: debhelper-compat (= 13), autoconf, autoconf-archive, automake, libtool, zlib1g-dev, libssl-dev
+Rules-Requires-Root: no
 Homepage: http://www.httrack.com
 Vcs-Git: https://github.com/xroche/httrack.git
-Vcs-Browser: https://code.google.com/p/httrack/source/browse/trunk/src
+Vcs-Browser: https://github.com/xroche/httrack
 
 Package: httrack
 Architecture: any
+Multi-Arch: foreign
 Depends: ${misc:Depends}, ${shlibs:Depends}
 Suggests: webhttrack, httrack-doc
 Description: Copy websites to your computer (Offline browser)
@@ -23,11 +25,12 @@ Description: Copy websites to your computer (Offline browser)
  browse the site from link to link, as if you were viewing it online.
  HTTrack can also update an existing mirrored site, and resume
  interrupted downloads. HTTrack is fully configurable, and has an
- integrated help system. 
+ integrated help system.
 
 Package: webhttrack
 Architecture: any
-Depends: ${misc:Depends}, ${shlibs:Depends}, webhttrack-common, iceape-browser | iceweasel | icecat | mozilla | firefox | mozilla-firefox | www-browser
+Multi-Arch: foreign
+Depends: ${misc:Depends}, ${shlibs:Depends}, webhttrack-common, sensible-utils, iceape-browser | iceweasel | icecat | mozilla | firefox | mozilla-firefox | www-browser
 Replaces: webhttrack-common (<< 3.43.9-2)
 Breaks: webhttrack-common (<< 3.43.9-2)
 Suggests: httrack, httrack-doc
@@ -49,6 +52,7 @@ Description: Copy websites to your computer, httrack with a Web interface
 
 Package: webhttrack-common
 Architecture: all
+Multi-Arch: foreign
 Depends: ${misc:Depends}
 Description: webhttrack common files
  This package is the common files of webhttrack, website copier and
@@ -56,26 +60,27 @@ Description: webhttrack common files
 
 Package: libhttrack2
 Architecture: any
+Multi-Arch: same
 Section: libs
 Replaces: libhttrack1
 Conflicts: libhttrack1
 Depends: ${misc:Depends}, ${shlibs:Depends}
-Recommends: libssl1.0.0
 Description: Httrack website copier library
  This package is the library part of httrack, website copier and mirroring
  utility
 
 Package: libhttrack-dev
 Architecture: any
+Multi-Arch: same
 Section: libdevel
 Depends: ${misc:Depends}, ${shlibs:Depends}, zlib1g-dev
-Recommends: libssl1.0.0
 Description: Httrack website copier includes and development files
  This package adds supplemental files for using the httrack website copier
  library
 
 Package: httrack-doc
 Architecture: all
+Multi-Arch: foreign
 Section: doc
 Depends: ${misc:Depends}
 Description: Httrack website copier additional documentation
@@ -84,6 +89,7 @@ Description: Httrack website copier additional documentation
 
 Package: proxytrack
 Architecture: any
+Multi-Arch: foreign
 Depends: ${misc:Depends}, ${shlibs:Depends}
 Suggests: squid, httrack
 Description: Build HTTP Caches using archived websites copied by HTTrack

debian/copyright

@@ -13,19 +13,9 @@ the Free Software Foundation, either version 3 of the License, or
 (at your option) any later version.
 
 On Debian systems, the complete text of the GNU General Public
-License can be found in /usr/share/common-licenses/GPL file.
+License version 3 can be found in /usr/share/common-licenses/GPL-3 file.
 
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
-
-In addition, as a special exception, Xavier Roche gives permission to
-link the code of this program with the openSSL library (or with
-modified versions of openSSL that use the same license as openSSL),
-and distribute linked combinations including the two.  You must obey
-the GNU General Public License in all respects for all of the code
-used other than openSSL.  If you modify this file, you may extend this
-exception to your version of the file, but you are not obligated to do
-so.  If you do not wish to do so, delete this exception statement from
-your version.

debian/httrack-doc.debhelper.log

@@ -1,2 +0,0 @@
-dh_lintian
-dh_autoreconf

debian/httrack-doc.files

@@ -1,4 +1,3 @@
 usr/share/httrack/html
 usr/share/doc/httrack
 usr/share/doc/httrack/httrack-doc.html
-usr/share/lintian/overrides/httrack-doc

debian/httrack-doc.lintian-overrides

@@ -1,3 +1,2 @@
-extra-license-file usr/share/httrack/html/license.txt
-duplicate-changelog-files usr/share/doc/httrack/changelog.gz usr/share/doc/httrack/history.txt.gz
-extended-description-is-probably-too-short
+httrack-doc: extra-license-file usr/share/httrack/html/license.txt
+httrack-doc: package-contains-documentation-outside-usr-share-doc usr/share/httrack/*

debian/httrack.debhelper.log

@@ -1,2 +0,0 @@
-dh_lintian
-dh_autoreconf

debian/httrack.lintian-overrides

@@ -1 +0,0 @@
-duplicate-changelog-files usr/share/doc/httrack/changelog.gz usr/share/doc/httrack/history.txt.gz

debian/libhttrack-dev.debhelper.log

@@ -1,2 +0,0 @@
-dh_lintian
-dh_autoreconf

debian/libhttrack-dev.files

@@ -1,6 +1,5 @@
 usr/include/httrack
-usr/lib/libhttrack.{so}
-usr/lib/libhtsjava.{so}
+usr/lib/*/libhttrack.{so}
+usr/lib/*/libhtsjava.{so}
 usr/share/httrack/libtest
-usr/lib/httrack/libtest
-usr/share/lintian/overrides/libhttrack-dev
+usr/lib/*/httrack/libtest

debian/libhttrack-dev.lintian-overrides

@@ -1 +1,4 @@
-hardening-no-fortify-functions usr/lib/httrack/libtest/libfilenameiisbug.so.1.0.0
+libhttrack-dev: breakout-link *
+libhttrack-dev: hardening-no-fortify-functions usr/lib/x86_64-linux-gnu/httrack/libtest/*
+libhttrack-dev: package-contains-documentation-outside-usr-share-doc usr/share/httrack/libtest/readme.txt
+libhttrack-dev: package-name-defined-in-config-h usr/include/httrack/config.h

debian/libhttrack-swf1.files

@@ -1,2 +1,2 @@
-usr/lib/libhtsswf.so.1.0.0
-usr/lib/libhtsswf.so.1
+usr/lib/*/libhtsswf.so.1.0.0
+usr/lib/*/libhtsswf.so.1

debian/libhttrack2.debhelper.log

@@ -1,2 +0,0 @@
-dh_lintian
-dh_autoreconf

debian/libhttrack2.files

@@ -1,5 +1,5 @@
-usr/lib/libhttrack.so.2.0.48
-usr/lib/libhttrack.so.2
-usr/lib/libhtsjava.so.2.0.48
-usr/lib/libhtsjava.so.2
+usr/lib/*/libhttrack.so.2.0.49
+usr/lib/*/libhttrack.so.2
+usr/lib/*/libhtsjava.so.2.0.49
+usr/lib/*/libhtsjava.so.2
 usr/share/httrack/templates

debian/libhttrack2.lintian-overrides

@@ -0,0 +1,2 @@
+libhttrack2: no-symbols-control-file usr/lib/*
+libhttrack2: spelling-error-in-binary usr/lib/*/libhttrack.so.* updat update

debian/proxytrack.debhelper.log

@@ -1,2 +0,0 @@
-dh_lintian
-dh_autoreconf

debian/rules

@@ -3,12 +3,12 @@
 # Uncomment this to turn on verbose mode.
 #export DH_VERBOSE=1
 
-# *** Patch for s390, mips, hppa..
+# *** Patch for s390, mips ..
 # It seems that htscore.c can not compile on several archs, due to compiler
 # capacity limits. These lines shall be removed when gcc is upgraded.
 # See discussions on 'Assembler messages: Branch out of range'
 # Addition (04/2004): gcc-3.3 on arm fcks up with htscoremain.c and -O3 (..)
-ifeq ($(DEB_HOST_ARCH),$(findstring $(DEB_HOST_ARCH),s390 mips mipsel hppa m68k arm))
+ifeq ($(DEB_HOST_ARCH),$(findstring $(DEB_HOST_ARCH),s390 mips mipsel m68k arm))
 	CFLAGS += -DNOSTRDEBUG
 endif
 
@@ -44,7 +44,7 @@ build-indep:
 
 build-arch: build-stamp
 
-build-stamp: configure-stamp 
+build-stamp: configure-stamp
 	dh_testdir
 	dh_auto_build
 	dh_auto_test
@@ -81,37 +81,26 @@ install: build
 	mv $(CURDIR)/debian/httrack/usr/share/httrack/html/httrack-doc.html \
 		$(CURDIR)/debian/httrack/usr/share/doc/httrack/httrack-doc.html
 
-	# place libraries and cleanup
-	mkdir -p $(CURDIR)/debian/httrack/usr/lib/httrack/
-	mv $(CURDIR)/debian/httrack/usr/bin/htsserver \
-		$(CURDIR)/debian/httrack/usr/lib/httrack/
 	# remove *.la (https://wiki.debian.org/ReleaseGoals/LAFileRemoval)
-	rm -f $(CURDIR)/debian/httrack/usr/lib/*.la
-	rm -f $(CURDIR)/debian/httrack/usr/lib/httrack/*.la
+	rm -f $(CURDIR)/debian/httrack/usr/lib/$(DEB_HOST_MULTIARCH)/*.la
+	rm -f $(CURDIR)/debian/httrack/usr/lib/$(DEB_HOST_MULTIARCH)/httrack/*.la
 	# remove *.a unless we do not have *.so files
 	# see BUG #744594
-	if ls $(CURDIR)/debian/httrack/usr/lib/*.so >/dev/null 2>/dev/null ; then \
-		rm -f $(CURDIR)/debian/httrack/usr/lib/*.a ; \
+	if ls $(CURDIR)/debian/httrack/usr/lib/$(DEB_HOST_MULTIARCH)/*.so >/dev/null 2>/dev/null ; then \
+		rm -f $(CURDIR)/debian/httrack/usr/lib/$(DEB_HOST_MULTIARCH)/*.a ; \
 	fi
-	if ls $(CURDIR)/debian/httrack/usr/lib/httrack/*.so >/dev/null 2>/dev/null ; then \
-		rm -f $(CURDIR)/debian/httrack/usr/lib/httrack/*.a ; \
+	if ls $(CURDIR)/debian/httrack/usr/lib/$(DEB_HOST_MULTIARCH)/httrack/*.so >/dev/null 2>/dev/null ; then \
+		rm -f $(CURDIR)/debian/httrack/usr/lib/$(DEB_HOST_MULTIARCH)/httrack/*.a ; \
 	fi
-	mv $(CURDIR)/debian/httrack/usr/lib/httrack/lib* \
+	mv $(CURDIR)/debian/httrack/usr/lib/$(DEB_HOST_MULTIARCH)/httrack/lib* \
 		$(CURDIR)/debian/httrack/usr/share/httrack/libtest/
-	mkdir -p $(CURDIR)/debian/httrack/usr/lib/httrack/libtest
+	mkdir -p $(CURDIR)/debian/httrack/usr/lib/$(DEB_HOST_MULTIARCH)/httrack/libtest
 	mv $(CURDIR)/debian/httrack/usr/share/httrack/libtest/lib* \
-		$(CURDIR)/debian/httrack/usr/lib/httrack/libtest
-	ln -s ../../../share/httrack/libtest/readme.txt \
-		 $(CURDIR)/debian/httrack/usr/lib/httrack/libtest/readme.txt
+		$(CURDIR)/debian/httrack/usr/lib/$(DEB_HOST_MULTIARCH)/httrack/libtest
+	ln -s /usr/share/httrack/libtest/readme.txt \
+		 $(CURDIR)/debian/httrack/usr/lib/$(DEB_HOST_MULTIARCH)/httrack/libtest/readme.txt
 
-	# Lintian overrides
-	mkdir -p $(CURDIR)/debian/httrack/usr/share/lintian/overrides
-	cp $(CURDIR)/debian/httrack.lintian-overrides \
-		$(CURDIR)/debian/httrack/usr/share/lintian/overrides/httrack
-	cp $(CURDIR)/debian/libhttrack-dev.lintian-overrides \
-		$(CURDIR)/debian/httrack/usr/share/lintian/overrides/libhttrack-dev
-	cp $(CURDIR)/debian/httrack-doc.lintian-overrides \
-		$(CURDIR)/debian/httrack/usr/share/lintian/overrides/httrack-doc
+	dh_lintian
 
 	dh_movefiles --sourcedir=debian/httrack
 
@@ -143,10 +132,10 @@ binary-arch: build install
 	dh_strip -a
 	dh_compress -a
 	dh_fixperms -a
-	dh_makeshlibs -a -X/usr/lib/httrack/libtest --version-info
+	dh_makeshlibs -a -X/usr/lib/$(DEB_HOST_MULTIARCH)/httrack/libtest --version-info
 	dh_installdeb -a
 	# we depend on the current version (ABI may change)
-	dh_shlibdeps -a -ldebian/libhttrack2/usr/lib
+	dh_shlibdeps -a -ldebian/libhttrack2/usr/lib/$(DEB_HOST_MULTIARCH)
 	dh_gencontrol -a
 	dh_md5sums -a
 	dh_builddeb -a

debian/source.lintian-overrides

@@ -1,2 +0,0 @@
-httrack source: changelog-should-mention-nmu
-httrack source: source-nmu-has-incorrect-version-number

debian/source/lintian-overrides

@@ -0,0 +1,8 @@
+httrack source: changelog-should-mention-nmu
+httrack source: source-nmu-has-incorrect-version-number
+
+# The bundled HTML pages are the genuine upstream documentation taken from
+# the httrack.com website. lintian's long-line heuristic mistakes them for
+# minified or generated content, but they are the actual source.
+httrack source: source-is-missing [html/*]
+httrack source: source-is-missing [templates/*]

debian/watch

@@ -1,7 +1,6 @@
-# format version number, currently 3; this line is compulsory!
-version=3
+# format version number; this line is compulsory!
+version=4
 
 # main httrack.com download page ; fetch the mirror version number
-http://www.httrack.com/page/2/en/index.html\
-	.*/httrack-([\d\.]+).tar.gz
-
+https://www.httrack.com/page/2/en/index.html \
+	.*/httrack-([\d\.]+)\.tar\.gz

debian/webhttrack-common.debhelper.log

@@ -1,2 +0,0 @@
-dh_lintian
-dh_autoreconf

debian/webhttrack-common.lintian-overrides

@@ -0,0 +1 @@
+webhttrack-common: package-contains-documentation-outside-usr-share-doc *

debian/webhttrack.debhelper.log

@@ -1,2 +0,0 @@
-dh_lintian
-dh_autoreconf

debian/webhttrack.files

@@ -1,5 +1,5 @@
-usr/lib/httrack/htsserver
 usr/bin/webhttrack
+usr/bin/htsserver
 usr/share/man/man1/webhttrack.1
 usr/share/man/man1/htsserver.1
 usr/share/applications/WebHTTrack-Websites.desktop

debian/webhttrack.menu

@@ -1,4 +0,0 @@
-?package(webhttrack):needs="X11" section="Applications/Network/Web Browsing" \
-        title="WebHTTrack" command="webhttrack" hints="Offline browsers" \
-        icon16x16="/usr/share/pixmaps/httrack16x16.xpm" \
-        icon32x32="/usr/share/pixmaps/httrack32x32.xpm"

depcomp

@@ -1,10 +1,9 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2012-03-27.16; # UTC
+scriptversion=2018-03-07.03; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
-# 2011, 2012 Free Software Foundation, Inc.
+# Copyright (C) 1999-2021 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -17,7 +16,7 @@ scriptversion=2012-03-27.16; # UTC
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -28,9 +27,9 @@ scriptversion=2012-03-27.16; # UTC
 
 case $1 in
   '')
-     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
+    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+    exit 1;
+    ;;
   -h | --h*)
     cat <<\EOF
 Usage: depcomp [--help] [--version] PROGRAM [ARGS]
@@ -57,11 +56,65 @@ EOF
     ;;
 esac
 
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'.  Note that this directory component will
+# be either empty or ending with a '/' character.  This is deliberate.
+set_dir_from ()
+{
+  case $1 in
+    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+      *) dir=;;
+  esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+  echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+  # If the compiler actually managed to produce a dependency file,
+  # post-process it.
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependency.h'.
+    # Do two passes, one to just change these to
+    #   $object: dependency.h
+    # and one to simply output
+    #   dependency.h:
+    # which is needed to avoid the deleted-header problem.
+    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+    } > "$depfile"
+    rm -f "$tmpdepfile"
+  else
+    make_dummy_depfile
+  fi
+}
+
 # A tabulation character.
 tab='	'
 # A newline character.
 nl='
 '
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
 
 if test -z "$depmode" || test -z "$source" || test -z "$object"; then
   echo "depcomp: Variables source, object and depmode must be set" 1>&2
@@ -75,6 +128,9 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
 
 rm -f "$tmpdepfile"
 
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
 # Some modes work just like other modes, but use different flags.  We
 # parameterize here, but still list the modes in the big case below,
 # to make depend.m4 easier to write.  Note that we *cannot* use a case
@@ -86,32 +142,32 @@ if test "$depmode" = hp; then
 fi
 
 if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
+  # This is just like dashmstdout with a different argument.
+  dashmflag=-xM
+  depmode=dashmstdout
 fi
 
 cygpath_u="cygpath -u -f -"
 if test "$depmode" = msvcmsys; then
-   # This is just like msvisualcpp but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u='sed s,\\\\,/,g'
-   depmode=msvisualcpp
+  # This is just like msvisualcpp but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvisualcpp
 fi
 
 if test "$depmode" = msvc7msys; then
-   # This is just like msvc7 but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u='sed s,\\\\,/,g'
-   depmode=msvc7
+  # This is just like msvc7 but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvc7
 fi
 
 if test "$depmode" = xlc; then
-   # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
-   gccflag=-qmakedep=gcc,-MF
-   depmode=gcc
+  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+  gccflag=-qmakedep=gcc,-MF
+  depmode=gcc
 fi
 
 case "$depmode" in
@@ -134,8 +190,7 @@ gcc3)
   done
   "$@"
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -143,13 +198,17 @@ gcc3)
   ;;
 
 gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
 ## There are various ways to get dependency output from gcc.  Here's
 ## why we pick this rather obscure method:
 ## - Don't want to use -MD because we'd like the dependencies to end
 ##   up in a subdir.  Having to rename by hand is ugly.
 ##   (We might end up doing this anyway to support other compilers.)
 ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
+##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   supported by the other compilers which use the 'gcc' depmode.
 ## - Using -M directly means running the compiler twice (even worse
 ##   than renaming).
   if test -z "$gccflag"; then
@@ -157,15 +216,14 @@ gcc)
   fi
   "$@" -Wp,"$gccflag$tmpdepfile"
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
+  # The second -e expression handles DOS-style file names with drive
+  # letters.
   sed -e 's/^[^:]*: / /' \
       -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
 ## This next piece of magic avoids the "deleted header file" problem.
@@ -174,15 +232,15 @@ gcc)
 ## typically no way to rebuild the header).  We avoid this by adding
 ## dummy dependencies for each header file.  Too bad gcc doesn't do
 ## this for us directly.
-  tr ' ' "$nl" < "$tmpdepfile" |
 ## Some versions of gcc put a space before the ':'.  On the theory
 ## that the space means something, we add a space to the output as
 ## well.  hp depmode also adds that space, but also prefixes the VPATH
 ## to the object.  Take care to not repeat it in the output.
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
-      | sed -e 's/$/ :/' >> "$depfile"
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -200,8 +258,7 @@ sgi)
     "$@" -MDupdate "$tmpdepfile"
   fi
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -209,7 +266,6 @@ sgi)
 
   if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
     echo "$object : \\" > "$depfile"
-
     # Clip off the initial element (the dependent).  Don't try to be
     # clever and replace this with sed code, as IRIX sed won't handle
     # lines with more than a fixed number of characters (4096 in
@@ -217,19 +273,15 @@ sgi)
     # the IRIX cc adds comments like '#:fec' to the end of the
     # dependency line.
     tr ' ' "$nl" < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr "$nl" ' ' >> "$depfile"
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+      | tr "$nl" ' ' >> "$depfile"
     echo >> "$depfile"
-
     # The second pass generates a dummy entry for each header file.
     tr ' ' "$nl" < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> "$depfile"
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+      >> "$depfile"
   else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
+    make_dummy_depfile
   fi
   rm -f "$tmpdepfile"
   ;;
@@ -247,9 +299,8 @@ aix)
   # current directory.  Also, the AIX compiler puts '$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  set_dir_from "$object"
+  set_base_from "$object"
   if test "$libtool" = yes; then
     tmpdepfile1=$dir$base.u
     tmpdepfile2=$base.u
@@ -262,9 +313,7 @@ aix)
     "$@" -M
   fi
   stat=$?
-
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
@@ -273,65 +322,113 @@ aix)
   do
     test -f "$tmpdepfile" && break
   done
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form 'foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # '$object: dependent.h' and one to simply 'dependent.h:'.
-    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-    sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
+  aix_post_process_depfile
   ;;
 
-icc)
-  # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
-  # However on
-  #    $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using '\':
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-  # tcc 0.9.26 (FIXME still under development at the moment of writing)
-  # will emit a similar output, but also prepend the continuation lines
-  # with horizontal tabulation characters.
+tcc)
+  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+  # FIXME: That version still under development at the moment of writing.
+  #        Make that this statement remains true also for stable, released
+  #        versions.
+  # It will wrap lines (doesn't matter whether long or short) with a
+  # trailing '\', as in:
+  #
+  #   foo.o : \
+  #    foo.c \
+  #    foo.h \
+  #
+  # It will put a trailing '\' even on the last line, and will use leading
+  # spaces rather than leading tabs (at least since its commit 0394caf7
+  # "Emit spaces for -MD").
   "$@" -MD -MF "$tmpdepfile"
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
   rm -f "$depfile"
-  # Each line is of the form 'foo.o: dependent.h',
-  # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
+  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+  # We have to change lines of the first kind to '$object: \'.
+  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+  # And for each line of the second kind, we have to emit a 'dep.h:'
+  # dummy dependency, to avoid the deleted-header problem.
+  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file.  A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+  # Portland's C compiler understands '-MD'.
+  # Will always output deps to 'file.d' where file is the root name of the
+  # source file under compilation, even if file resides in a subdirectory.
+  # The object file name does not affect the name of the '.d' file.
+  # pgcc 10.2 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using '\' :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+  set_dir_from "$object"
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  set_base_from "$source"
+  tmpdepfile=$base.d
+
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir=$base.d-lock
+  trap "
+    echo '$0: caught signal, cleaning up...' >&2
+    rmdir '$lockdir'
+    exit 1
+  " 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0; do
+    # mkdir is a portable test-and-set.
+    if mkdir "$lockdir" 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
+      stat=$?
+      # Release the lock.
+      rmdir "$lockdir"
+      break
+    else
+      # If the lock is being held by a different process, wait
+      # until the winning process is done or we timeout.
+      while test -d "$lockdir" && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
   # Do two passes, one to just change these to
-  # '$object: dependent.h' and one to simply 'dependent.h:'.
-  sed -e "s/^[ $tab][ $tab]*/  /" -e "s,^[^:]*:,$object :," \
-    < "$tmpdepfile" > "$depfile"
-  sed '
-    s/[ '"$tab"'][ '"$tab"']*/ /g
-    s/^ *//
-    s/ *\\*$//
-    s/^[^:]*: *//
-    /^$/d
-    /:$/d
-    s/$/ :/
-  ' < "$tmpdepfile" >> "$depfile"
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -342,9 +439,8 @@ hp2)
   # 'foo.d', which lands next to the object file, wherever that
   # happens to be.
   # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  set_dir_from  "$object"
+  set_base_from "$object"
   if test "$libtool" = yes; then
     tmpdepfile1=$dir$base.d
     tmpdepfile2=$dir.libs/$base.d
@@ -355,8 +451,7 @@ hp2)
     "$@" +Maked
   fi
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
      rm -f "$tmpdepfile1" "$tmpdepfile2"
      exit $stat
   fi
@@ -366,76 +461,61 @@ hp2)
     test -f "$tmpdepfile" && break
   done
   if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
     # Add 'dependent.h:' lines.
     sed -ne '2,${
-	       s/^ *//
-	       s/ \\*$//
-	       s/$/:/
-	       p
-	     }' "$tmpdepfile" >> "$depfile"
+               s/^ *//
+               s/ \\*$//
+               s/$/:/
+               p
+             }' "$tmpdepfile" >> "$depfile"
   else
-    echo "#dummy" > "$depfile"
+    make_dummy_depfile
   fi
   rm -f "$tmpdepfile" "$tmpdepfile2"
   ;;
 
 tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in 'foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  # The Tru64 compiler uses -MD to generate dependencies as a side
+  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+  # dependencies in 'foo.d' instead, so we check for that too.
+  # Subdirectories are respected.
+  set_dir_from  "$object"
+  set_base_from "$object"
 
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mechanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
+  if test "$libtool" = yes; then
+    # Libtool generates 2 separate objects for the 2 libraries.  These
+    # two compilations output dependencies in $dir.libs/$base.o.d and
+    # in $dir$base.o.d.  We have to check for both files, because
+    # one of the two compilations can be disabled.  We should prefer
+    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+    # automatically cleaned when .libs/ is deleted, while ignoring
+    # the former would cause a distcleancheck panic.
+    tmpdepfile1=$dir$base.o.d          # libtool 1.5
+    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
+    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
+    "$@" -Wc,-MD
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    tmpdepfile3=$dir$base.d
+    "$@" -MD
+  fi
 
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
 
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  # Same post-processing that is required for AIX mode.
+  aix_post_process_depfile
+  ;;
 
 msvc7)
   if test "$libtool" = yes; then
@@ -446,8 +526,7 @@ msvc7)
   "$@" $showIncludes > "$tmpdepfile"
   stat=$?
   grep -v '^Note: including file: ' "$tmpdepfile"
-  if test "$stat" = 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -473,6 +552,7 @@ $ {
   G
   p
 }' >> "$depfile"
+  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
   rm -f "$tmpdepfile"
   ;;
 
@@ -524,13 +604,14 @@ dashmstdout)
   # in the target name.  This is to cope with DOS-style filenames:
   # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
   "$@" $dashmflag |
-    sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
+    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
   rm -f "$depfile"
   cat < "$tmpdepfile" > "$depfile"
-  tr ' ' "$nl" < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this sed invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -583,10 +664,12 @@ makedepend)
   # makedepend may prepend the VPATH from the source file name to the object.
   # No need to regex-escape $object, excess matching of '.' is harmless.
   sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process the last invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed '1,2d' "$tmpdepfile" \
+    | tr ' ' "$nl" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile" "$tmpdepfile".bak
   ;;
 
@@ -622,10 +705,10 @@ cpp)
     esac
   done
 
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
+  "$@" -E \
+    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+    | sed '$ s: \\$::' > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
   cat < "$tmpdepfile" >> "$depfile"
@@ -657,15 +740,15 @@ msvisualcpp)
       shift
       ;;
     "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
+        set fnord "$@"
+        shift
+        shift
+        ;;
     *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
+        set fnord "$@" "$arg"
+        shift
+        shift
+        ;;
     esac
   done
   "$@" -E 2>/dev/null |
@@ -700,9 +783,9 @@ exit 0
 # Local Variables:
 # mode: shell-script
 # sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
 # time-stamp-end: "; # UTC"
 # End:

history.txt

@@ -3,6 +3,50 @@ HTTrack Website Copier release history:
 --------------------------------------
 
 This file lists all changes and fixes that have been made for HTTrack
+
+3.49-8
++ Changed: dropped the obsolete OpenSSL linking exception (OpenSSL 3.0+ is Apache-2.0 and GPL-compatible); httrack is now plain GPLv3-or-later
++ Fixed: link libhtsjava and the libtest examples directly against libc
++ Fixed: in-place changes made by the postprocess callback were not applied (Roman Sęk)
++ Fixed: "preffered" typo in the help text and man page (yosinn1-blip)
++ Fixed: corrections and updates of the Russian translation (German Aizek)
++ Fixed: corrections and updates of the Danish translation (scootergrisen)
+
+3.49-7
++ Fixed: keep generated config.h architecture-independent (Debian #1133728)
++ Fixed: man page rendered the -%! warning as bogus options (Debian #1061053)
+
+3.49-6
++ Fixed: puny_decode CVE-2017-14062
+
+3.49-5
++ Fixed: MiniZip CVE-2023-45853
++ Lintian fixes, multiple build fixes
+
+3.49-4
++ New: Push default bandwidth to 100kiB/s, max to 10MiB/s
++ Fixed: Multiple packaging and build fixes, added security flags
+
+3.49-3
++ Fixed: Corrections and updates of the Brazilian Portuguese translations (Paulo Neto)
++ Fixed: Fixed for Android
++ Fixed: Add mimetypes for documents (Pablo Castellano)
++ Fixed: Add firefox-developer-edition (sickcodes)
++ New: Support data-src and data-srcset for img (Brian 'Redbeard' Harrington)
++ Fixed: When using the '%N' structure naming key, separate the filename and extension with a dot (Steve Mokris)
++ Fixed: Multiple build updates
+
+3.49-2
++ Fixed: Buffer overflow in output option commandline argument (VL-ID 2068) (Hosein Askari)
++ Fixed: Minor fixes
+
+3.48-23
++ Fixed: on Linux, FTBFS with openssl 1.1.0
+
+3.48-22
++ Fixed: on Windows, fixed possible DLL local injection (Tunisian Cyber)
++ Fixed: various typos
+
 3.48-21
 + Fixed: Google RPMs use /usr/bin/google-chrome as program location (Cickumqt)
 + Fixed: Fixed htsserver not dying (immediately) on quit

html/Makefile.am

@@ -39,6 +39,6 @@ EXTRA_DIST = $(HelpHtml_DATA) $(HelpHtmlimg_DATA) $(HelpHtmlimages_DATA) \
 install-data-hook:
 	if test ! -L $(DESTDIR)$(prefix)/share/httrack/html ; then \
 		( cd $(DESTDIR)$(prefix)/share/httrack \
-			&& $(LN_S) ../doc/httrack html \
+			&& $(LN_S) $(htmldir) html \
 		) \
 	fi

html/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.16.5 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2021 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,23 +15,61 @@
 @SET_MAKE@
 
 VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
     esac; \
-    test $$am__dry = yes; \
-  }
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,19 +89,31 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = html
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
 	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
 	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/snprintf.m4 \
-	$(top_srcdir)/configure.ac
+	$(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
 am__can_run_installinfo = \
@@ -111,10 +160,13 @@ DATA = $(HelpHtml_DATA) $(HelpHtmlTxt_DATA) $(HelpHtmldiv_DATA) \
 	$(HelpHtmlroot_DATA) $(VFolderEntry_DATA) $(WebHtml_DATA) \
 	$(WebHtmlimages_DATA) $(WebIcon16x16_DATA) \
 	$(WebIcon32x32_DATA) $(WebIcon48x48_DATA) $(WebPixmap_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
 AM_CFLAGS = @AM_CFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
@@ -123,9 +175,11 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
+CFLAGS_PIE = @CFLAGS_PIE@
 CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
+CSCOPE = @CSCOPE@
+CTAGS = @CTAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFAULT_CFLAGS = @DEFAULT_CFLAGS@
 DEFAULT_LDFLAGS = @DEFAULT_LDFLAGS@
@@ -139,8 +193,10 @@ ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
+ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
+FILECMD = @FILECMD@
 GREP = @GREP@
 HAVE_VISIBILITY = @HAVE_VISIBILITY@
 HTTPS_SUPPORT = @HTTPS_SUPPORT@
@@ -152,6 +208,7 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
+LDFLAGS_PIE = @LDFLAGS_PIE@
 LFS_FLAG = @LFS_FLAG@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
@@ -160,6 +217,7 @@ LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_CV_OBJDIR = @LT_CV_OBJDIR@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -236,6 +294,7 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
+runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
@@ -294,14 +353,13 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu html/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu html/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
 	esac;
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -591,14 +649,16 @@ uninstall-WebPixmapDATA:
 	@list='$(WebPixmap_DATA)'; test -n "$(WebPixmapdir)" || list=; \
 	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 	dir='$(DESTDIR)$(WebPixmapdir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
+tags TAGS:
 
-ctags: CTAGS
-CTAGS:
+ctags CTAGS:
 
+cscope cscopelist:
 
-distdir: $(DISTFILES)
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -747,22 +807,23 @@ uninstall-am: uninstall-HelpHtmlDATA uninstall-HelpHtmlTxtDATA \
 .MAKE: install-am install-data-am install-strip
 
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
-	dvi-am html html-am info info-am install install-HelpHtmlDATA \
-	install-HelpHtmlTxtDATA install-HelpHtmldivDATA \
-	install-HelpHtmlimagesDATA install-HelpHtmlimgDATA \
-	install-HelpHtmlrootDATA install-VFolderEntryDATA \
-	install-WebHtmlDATA install-WebHtmlimagesDATA \
-	install-WebIcon16x16DATA install-WebIcon32x32DATA \
-	install-WebIcon48x48DATA install-WebPixmapDATA install-am \
-	install-data install-data-am install-data-hook install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	uninstall uninstall-HelpHtmlDATA uninstall-HelpHtmlTxtDATA \
+	cscopelist-am ctags-am distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
+	install install-HelpHtmlDATA install-HelpHtmlTxtDATA \
+	install-HelpHtmldivDATA install-HelpHtmlimagesDATA \
+	install-HelpHtmlimgDATA install-HelpHtmlrootDATA \
+	install-VFolderEntryDATA install-WebHtmlDATA \
+	install-WebHtmlimagesDATA install-WebIcon16x16DATA \
+	install-WebIcon32x32DATA install-WebIcon48x48DATA \
+	install-WebPixmapDATA install-am install-data install-data-am \
+	install-data-hook install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
+	uninstall-HelpHtmlDATA uninstall-HelpHtmlTxtDATA \
 	uninstall-HelpHtmldivDATA uninstall-HelpHtmlimagesDATA \
 	uninstall-HelpHtmlimgDATA uninstall-HelpHtmlrootDATA \
 	uninstall-VFolderEntryDATA uninstall-WebHtmlDATA \
@@ -770,11 +831,13 @@ uninstall-am: uninstall-HelpHtmlDATA uninstall-HelpHtmlTxtDATA \
 	uninstall-WebIcon32x32DATA uninstall-WebIcon48x48DATA \
 	uninstall-WebPixmapDATA uninstall-am
 
+.PRECIOUS: Makefile
+
 
 install-data-hook:
 	if test ! -L $(DESTDIR)$(prefix)/share/httrack/html ; then \
 		( cd $(DESTDIR)$(prefix)/share/httrack \
-			&& $(LN_S) ../doc/httrack html \
+			&& $(LN_S) $(htmldir) html \
 		) \
 	fi
 

html/cmddoc.html

@@ -118,11 +118,11 @@ The command-line version
       <br>
       <br>
     <li>Add the URLs, separated by a blank space</li>
-      <br><small><tt>httrack www.someweb.com/foo/</tt></small>
+      <br><small><tt>httrack www.example.com/foo/</tt></small>
       <br>
       <br>
     <li>If you need, add some options (see the <a href="options.html">option list</a>)</li>
-      <br><small><tt>httrack www.someweb.com/foo/ -O "/webs" -N4 -P proxy.myhost.com:3128</tt></small>
+      <br><small><tt>httrack www.example.com/foo/ -O "/webs" -N4 -P proxy.myhost.com:3128</tt></small>
       <br>
       <br>
     <li>Launch the command line, and wait until the mirror is finishing</li>

html/faq.html

@@ -303,43 +303,43 @@ Okay, let me explain how to precisely control the capture process.<br>
 Let's take an example:<br>
 <br>
 Imagine you want to capture the following site:<br>
-<tt>www.someweb.com/gallery/flowers/</tt><br>
+<tt>www.example.com/gallery/flowers/</tt><br>
 <br>
-HTTrack, by default, will capture all links encountered in <tt>www.someweb.com/gallery/flowers/</tt> or in lower directories, like
-<tt>www.someweb.com/gallery/flowers/roses/</tt>.<br>
+HTTrack, by default, will capture all links encountered in <tt>www.example.com/gallery/flowers/</tt> or in lower directories, like
+<tt>www.example.com/gallery/flowers/roses/</tt>.<br>
 It will not follow links to other websites, because this behaviour might cause to capture the Web entirely!<br>
-It will not follow links located in higher directories, too (for example, <tt>www.someweb.com/gallery/flowers/</tt> itself) because this 
+It will not follow links located in higher directories, too (for example, <tt>www.example.com/gallery/flowers/</tt> itself) because this 
 might cause to capture too much data.<br>
 <br>
 This is the <b><u>default behaviour</b></u> of HTTrack, BUT, of course, if you want, you can tell HTTrack to capture other directorie(s), website(s)!..
 <br>
-In our example, we might want also to capture all links in <tt>www.someweb.com/gallery/trees/</tt>, and in <tt>www.someweb.com/photos/</tt><br>
+In our example, we might want also to capture all links in <tt>www.example.com/gallery/trees/</tt>, and in <tt>www.example.com/photos/</tt><br>
 <br>
 This can easily done by using filters: go to the Option panel, select the 'Scan rules' tab, and enter this line:
 (you can leave a blank space between each rules, instead of entering a carriage return)<br>
-<tt>+www.someweb.com/gallery/trees/*<br>
-+www.someweb.com/photos/*</tt><br>
+<tt>+www.example.com/gallery/trees/*<br>
++www.example.com/photos/*</tt><br>
 <br>
-This means "accept all links begining with <tt>www.someweb.com/gallery/trees/</tt> and <tt>www.someweb.com/photos/</tt>" 
+This means "accept all links begining with <tt>www.example.com/gallery/trees/</tt> and <tt>www.example.com/photos/</tt>" 
 - the <tt>+</tt> means "accept" and the final <tt>*</tt> means "any character will match after the previous ones".
 Remember the <tt>*.doc</tt> or <tt>*.zip</tt> encountered when you want to select all files from a certain type on your computer: 
 it is almost the same here, except the begining "+"<br>
 <br>
-Now, we might want to exclude all links in <tt>www.someweb.com/gallery/trees/hugetrees/</tt>, because with the previous filter,
+Now, we might want to exclude all links in <tt>www.example.com/gallery/trees/hugetrees/</tt>, because with the previous filter,
 we accepted too many files. Here again, you can add a filter rule to refuse these links. Modify the previous filters to:<br>
-<tt>+www.someweb.com/gallery/trees/*<br>
-+www.someweb.com/photos/*<br>
--www.someweb.com/gallery/trees/hugetrees/*</tt><br>
+<tt>+www.example.com/gallery/trees/*<br>
++www.example.com/photos/*<br>
+-www.example.com/gallery/trees/hugetrees/*</tt><br>
 <br>
 You have noticed the <tt>-</tt> in the begining of the third rule: this means "refuse links matching the rule" 
-; and the rule is "any files begining with <tt>www.someweb.com/gallery/trees/hugetrees/</tt><br>
+; and the rule is "any files begining with <tt>www.example.com/gallery/trees/hugetrees/</tt><br>
 
 Voila! With these three rules, you have precisely defined what you wanted to capture.<br>
 <br>
 A more complex example?<br>
 <br>
-Imagine that you want to accept all jpg files (files with .jpg type) that have "blue" in the name and located in www.someweb.com<br>
-<tt>+www.someweb.com/*blue*.jpg</tt><br>
+Imagine that you want to accept all jpg files (files with .jpg type) that have "blue" in the name and located in www.example.com<br>
+<tt>+www.example.com/*blue*.jpg</tt><br>
 <br>
 More detailed information can be found <a href="filters.html">here</a>!<br>
 <br>
@@ -411,7 +411,7 @@ A: <em>Yes. It is called WebHTTrack. See the download section at <a href="http:/
 
 <a NAME="Q0">Q: <strong>Some sites are captured very well, other aren't. Why?</strong><br>
 A: <em>
-There are several reasons (and solutions) for a mirror to fail. Reading the log files (ans this FAQ!) is generally a VERY good idea to figure out what occured.
+There are several reasons (and solutions) for a mirror to fail. Reading the log files (ans this FAQ!) is generally a VERY good idea to figure out what occurred.
 
 <ul>
  <li>Links within the site refers to external links, or links located in another (or upper) directories, not captured by default - the use of filters is generally THE solution, as this is one of the powerful option in HTTrack. <u>See the above questions/answers</u>.</li>
@@ -440,7 +440,7 @@ This will cause a performance loss, but will increase the compatibility with som
 
 <a NAME="QT1">Q: <strong>Only the first page is caught. What's wrong?</a></strong></br>
 A: <em>First, check the <tt>hts-log.txt</tt> file (and/or <tt>hts-err.txt</tt> error log file) - this can give you precious information.<br>
-The problem can be a website that redirects you to another site (for example, <tt>www.someweb.com</tt> to <tt>public.someweb.com</tt>) : 
+The problem can be a website that redirects you to another site (for example, <tt>www.example.com</tt> to <tt>public.example.com</tt>) : 
 in this case, use filters to accept this site<br>
 This can be, also, a problem in the HTTrack options (link depth too low, for example)</em>
 
@@ -485,10 +485,10 @@ You may also want to capture files that are forbidden by default by the <a href=
 In these cases, HTTrack does not capture these links automatically, you have to tell it to do so. 
 <br><br>
 <ul><li>Either use the <a href="filters.html">filters</a>.<br>
-Example: You are downloading <tt>http://www.someweb.com/foo/</tt> and can not get .jpg images located
-in <tt>http://www.someweb.com/bar/</tt> (for example, http://www.someweb.com/bar/blue.jpg)<br>
-Then, add the filter rule <tt>+www.someweb.com/bar/*.jpg</tt> to accept all .jpg files from this location<br>
-You can, also, accept all files from the /bar folder with <tt>+www.someweb.com/bar/*</tt>, or only html files with <tt>+www.someweb.com/bar/*.html</tt> and so on..<br><br>
+Example: You are downloading <tt>http://www.example.com/foo/</tt> and can not get .jpg images located
+in <tt>http://www.example.com/bar/</tt> (for example, http://www.example.com/bar/blue.jpg)<br>
+Then, add the filter rule <tt>+www.example.com/bar/*.jpg</tt> to accept all .jpg files from this location<br>
+You can, also, accept all files from the /bar folder with <tt>+www.example.com/bar/*</tt>, or only html files with <tt>+www.example.com/bar/*.html</tt> and so on..<br><br>
 </li><li>
 If the problems are related to robots.txt rules, that do not let you access some folders (check in the logs if you are not sure),
 you may want to disable the default robots.txt rules in the options. (but only disable this option with great care, 
@@ -509,8 +509,8 @@ and rescan the website as described before. HTTrack will be obliged to recatch t
 <a NAME="Q1bb">Q: <strong>FTP links are not caught! What's happening?</strong><br>
 A: <em>FTP files might be seen as external links, especially if they are located in outside domain. You have either to accept all external links (See the links options, -n option) or
 only specific files (see <a href="filters.html">filters</a> section). <br>
-Example: You are downloading <tt>http://www.someweb.com/foo/</tt> and can not get ftp://ftp.someweb.com files<br>
-Then, add the filter rule <tt>+ftp.someweb.com/*</tt> to accept all files from this (ftp) location<br>
+Example: You are downloading <tt>http://www.example.com/foo/</tt> and can not get ftp://ftp.example.com files<br>
+Then, add the filter rule <tt>+ftp.example.com/*</tt> to accept all files from this (ftp) location<br>
 </em>
 <br>
 
@@ -551,10 +551,10 @@ Note: In some rare cases, duplicate data files can be found when the website red
 
 <a NAME="Q1b2">Q: <strong>I'm downloading too many files! What can I do?</strong><br>
 A: <em>This is often the case when you use too large a filter, for example <tt>+*.html</tt>, which asks the
-engine to catch all .html pages (even ones on other sites!). In this case, try to use more specific filters, like <tt>+www.someweb.com/specificfolder/*.html</tt><br>
-If you still have too many files, use filters to avoid somes files. For example, if you have too many files from www.someweb.com/big/, 
-use <tt>-www.someweb.com/big/*</tt> to avoid all files from this folder. Remember that the default behaviour of the engine, when
-mirroring http://www.someweb.com/big/index.html, is to catch everything in http://www.someweb.com/big/. Filters are your friends,
+engine to catch all .html pages (even ones on other sites!). In this case, try to use more specific filters, like <tt>+www.example.com/specificfolder/*.html</tt><br>
+If you still have too many files, use filters to avoid somes files. For example, if you have too many files from www.example.com/big/, 
+use <tt>-www.example.com/big/*</tt> to avoid all files from this folder. Remember that the default behaviour of the engine, when
+mirroring http://www.example.com/big/index.html, is to catch everything in http://www.example.com/big/. Filters are your friends,
 use them!
 </em>
 <br>
@@ -562,7 +562,7 @@ use them!
 
 <a NAME="Q1b22">Q: <strong>The engine turns crazy, getting thousands of files! What's going on?</strong><br>
 A: <em>This can happen if a loop occurs in some bogus website. For example, a page that refers to itself, with a timestamp
-in the query string (e.g. <tt>http://www.someweb.com/foo.asp?ts=2000/10/10,09:45:17:147</tt>). 
+in the query string (e.g. <tt>http://www.example.com/foo.asp?ts=2000/10/10,09:45:17:147</tt>). 
 These are really annoying, as it is VERY difficult to detect the loop (the timestamp might be a page number).
 To limit the problem: set a recurse level (for example to 6), or avoid the bogus pages (use the filters)
 </em>
@@ -571,7 +571,7 @@ To limit the problem: set a recurse level (for example to 6), or avoid the bogus
 
 <a NAME="Q1b3">Q: <strong>File are sometimes renamed (the type is changed)! Why?</strong><br>
 A: <em>By default, HTTrack tries to know the type of remote files. This is useful when links like
-<tt>http://www.someweb.com/foo.cgi?id=1</tt> can be either HTML pages, images or anything else. 
+<tt>http://www.example.com/foo.cgi?id=1</tt> can be either HTML pages, images or anything else. 
 Locally, foo.cgi will not be recognized as an html page, or as an image, by your browser. HTTrack has to rename the file
 as foo.html or foo.gif so that it can be viewed.<br>
 </em>
@@ -730,8 +730,8 @@ but this is a smart bug..
 the domain, too. How to retrieve them?</strong><br>
 A: <em>If you just want to retrieve files that can be reached through links, just activate
 the 'get file near links' option. But if you want to retrieve html pages too, you can both
-use wildcards or explicit addresses ; e.g. add <tt>www.someweb.com/*</tt> to accept all
-files and pages from www.someweb.com.<br>
+use wildcards or explicit addresses ; e.g. add <tt>www.example.com/*</tt> to accept all
+files and pages from www.example.com.<br>
 <br>
 </em></a><a NAME="Q6">Q: <strong>I have forgotten some URLs of files during a long
 mirror.. Should I redo all?</strong><br>
@@ -744,7 +744,7 @@ A: <em>You can use different methods. You can use the 'get files near a link' op
 files are in a foreign domain. You can use, too, a filter adress: adding <tt>+*.zip</tt>
 in the URL list (or in the filter list) will accept all ZIP files, even if these files are
 outside the address. <br>
-Example : <tt>httrack www.someweb.com/someaddress.html +*.zip</tt> will allow
+Example : <tt>httrack www.example.com/someaddress.html +*.zip</tt> will allow
 you to retrieve all zip files that are linked on the site.</em><br>
 <br>
 </a><a NAME="Q8">Q: <strong>There are ZIP files in a page, but I don't want to transfer
@@ -771,7 +771,7 @@ them on filters!</strong><br>
 A: <em>By default, HTTrack retrieves all types of files on authorized links. To avoid
 that, define filters like </a><a NAME="Q7"><tt>-* +&lt;website&gt;/*.html
 +&lt;website&gt;/*.htm +&lt;website&gt;/ +*.&lt;type wanted&gt;</tt></a><a NAME="Q10"><br>
-Example: <tt>httrack www.someweb.com/index.html -* +www.someweb.com/*.htm* +www.someweb.com/*.gif +www.someweb.com/*.jpg</tt><br>
+Example: <tt>httrack www.example.com/index.html -* +www.example.com/*.htm* +www.example.com/*.gif +www.example.com/*.jpg</tt><br>
 <br>
 </em><a NAME="Q10">Q: <strong>When I use filters, I get too many files!</strong><br>
 A: <em>You might use too large a filter, for example <tt>*.html</tt> will get ALL html
@@ -779,13 +779,13 @@ files identified. If you want to get all files on an address, use <tt>www.&lt;ad
 If you want to get ONLY files defined by your filters, use something like <tt>-* +www.foo.com/*</tt>, because 
 <tt>+www.foo.com/*</tt> will only accept selected links without forbidding other ones!<br>
 There are lots of possibilities using filters.<br>
-Example:<tt>httrack www.someweb.com +*.someweb.com/*.htm*</tt><br>
+Example:<tt>httrack www.example.com +*.example.com/*.htm*</tt><br>
 <br>
 </em></a><a NAME="Q11">Q: <strong>When I use filters, I can't access another domain, but I
 have filtered it!</strong><br>
-A: <em>You may have done a mistake declaring filters, for example <tt>+www.someweb.com/*
--*someweb* </tt></em>will not work, because -*someweb* has an upper priority (because it has
-been declared after +www.someweb.com)<br>
+A: <em>You may have done a mistake declaring filters, for example <tt>+www.example.com/*
+-*example* </tt></em>will not work, because -*example* has an upper priority (because it has
+been declared after +www.example.com)<br>
 <br>
 </a><a NAME="Q12">Q: <strong>Must I add a&nbsp; '+' or '-' in the filter list when I want
 to use filters?</strong><br>
@@ -800,7 +800,7 @@ filter list) and accept only html files and the file(s) you want to retrieve (BU
 forget to add <tt>+&lt;website&gt;*.html</tt> in the filter list, or pages will not be
 scanned! Add the name of files you want with a <tt>*/</tt> before ; i.e. if you want to
 retrieve file.zip, add <tt>*/file.zip</tt>)<br>
-Example:<tt>httrack www.someweb.com +www.someweb.com/*.htm* +thefileiwant.zip</tt><br>
+Example:<tt>httrack www.example.com +www.example.com/*.htm* +thefileiwant.zip</tt><br>
 <br>
 </em>
 
@@ -828,7 +828,7 @@ A: <em>Yes. See the URL capture abilities (--catchurl for command-line release,
 A: <em>Yes. See the shell system command option (-V option for command-line release)</em>
 
 <br><br><a NAME="QM6">Q: <strong>Can I use username/password authentication on a site?</strong></a><br>
-A: <em>Yes. Use user:password@your_url (example: <tt>http://foo:bar@www.someweb.com/private/mybox.html</tt>)</em>
+A: <em>Yes. Use user:password@your_url (example: <tt>http://foo:bar@www.example.com/private/mybox.html</tt>)</em>
 
 <br><br><a NAME="QM7">Q: <strong>Can I use username/password authentication for a proxy?</strong></a><br>
 A: <em>Yes. Use user:password@your_proxy_name as your proxy name (example: <tt>smith:foo@proxy.mycorp.com</tt>)</em>

html/fcguide.html

@@ -121,7 +121,7 @@ that it is so rich with features that I could never really figure out
 precisely the right thing to do at any given point.  I was using
 recepies rather than knowledge to get the job done - and I was pestering
 the authors for those recepies.  After a few days of very helpful
-assistance from the authors I volenteered to write a users manual for
+assistance from the authors I volunteered to write a users manual for
 httrack - and here it is.  I hope it gets the job done.
 
 <hr>
@@ -221,7 +221,7 @@ Flow control:
   TN timeout, number of seconds after a non-responding link is shutdown (--timeout)
   RN number of retries, in case of timeout or non-fatal errors (*R1) (--retries[=N])
   JN traffic jam control, minimum transfert rate (bytes/seconds) tolerated for a link (--min-rate[=N])
-  HN host is abandonned if: 0=never, 1=timeout, 2=slow, 3=timeout or slow (--host-control[=N])
+  HN host is abandoned if: 0=never, 1=timeout, 2=slow, 3=timeout or slow (--host-control[=N])
 
 Links options:
  %P *extended parsing, attempt to parse all links, even in unknown tags or Javascript (%P0 don't use) (--extended-parsing[=N])
@@ -253,7 +253,7 @@ Spider options:
 Browser ID:
   F  user-agent field (-F "user-agent name") (--user-agent <param>)
  %F  footer string in Html code (-%F "Mirrored [from host %s [file %s [at %s]]]" (--footer <param>)
- %l  preffered language (-%l "fr, en, jp, *" (--language <param>)
+ %l  preferred language (-%l "fr, en, jp, *" (--language <param>)
 
 Log, index, cache
   C  create/use a cache for updates and retries (C0 no cache,C1 cache is prioritary,* C2 test update before) (--cache[=N])
@@ -299,7 +299,7 @@ Guru options: (do NOT use)
  #R  Old FTP routines (debug)
  #T  Generate transfer ops. log every minutes
  #u  Wait time
- #Z  Generate transfer rate statictics every minutes
+ #Z  Generate transfer rate statistics every minutes
  #!  Execute a shell command (-#! "echo hello")
 
 Command-line specific options:
@@ -315,24 +315,24 @@ Details: Option N
   N5 Images/other in web/xxx and HTML in web/HTML
   N99 All files in web/, with random names (gadget !)
   N100 Site-structure, without www.domain.xxx/
-  N101 Identical to N1 exept that "web" is replaced by the site's name
-  N102 Identical to N2 exept that "web" is replaced by the site's name
-  N103 Identical to N3 exept that "web" is replaced by the site's name
-  N104 Identical to N4 exept that "web" is replaced by the site's name
-  N105 Identical to N5 exept that "web" is replaced by the site's name
-  N199 Identical to N99 exept that "web" is replaced by the site's name
-  N1001 Identical to N1 exept that there is no "web" directory
-  N1002 Identical to N2 exept that there is no "web" directory
-  N1003 Identical to N3 exept that there is no "web" directory (option set for g option)
-  N1004 Identical to N4 exept that there is no "web" directory
-  N1005 Identical to N5 exept that there is no "web" directory
-  N1099 Identical to N99 exept that there is no "web" directory
+  N101 Identical to N1 except that "web" is replaced by the site's name
+  N102 Identical to N2 except that "web" is replaced by the site's name
+  N103 Identical to N3 except that "web" is replaced by the site's name
+  N104 Identical to N4 except that "web" is replaced by the site's name
+  N105 Identical to N5 except that "web" is replaced by the site's name
+  N199 Identical to N99 except that "web" is replaced by the site's name
+  N1001 Identical to N1 except that there is no "web" directory
+  N1002 Identical to N2 except that there is no "web" directory
+  N1003 Identical to N3 except that there is no "web" directory (option set for g option)
+  N1004 Identical to N4 except that there is no "web" directory
+  N1005 Identical to N5 except that there is no "web" directory
+  N1099 Identical to N99 except that there is no "web" directory
 Details: User-defined option N
   %n Name of file without file type (ex: image) (--do-not-recatch)
   %N Name of file, including file type (ex: image.gif)
   %t File type (ex: gif)
   %p Path [without ending /] (ex: /someimages)
-  %h Host name (ex: www.someweb.com) (--http-10)
+  %h Host name (ex: www.example.com) (--http-10)
   %M URL MD5 (128 bits, 32 ascii bytes)
   %Q query string MD5 (128 bits, 32 ascii bytes)
   %q small query string MD5 (16 bits, 4 ascii bytes) (--include-query-string)
@@ -356,17 +356,17 @@ Shortcuts:
 
 --http10              force http/1.0 requests (-%h)
 
-example: httrack www.someweb.com/bob/
-means:   mirror site www.someweb.com/bob/ and only this site
+example: httrack www.example.com/bob/
+means:   mirror site www.example.com/bob/ and only this site
 
-example: httrack www.someweb.com/bob/ www.anothertest.com/mike/ +*.com/*.jpg
+example: httrack www.example.com/bob/ www.anothertest.com/mike/ +*.com/*.jpg
 means:   mirror the two sites together (with shared links) and accept any .jpg files on .com sites
 
-example: httrack www.someweb.com/bob/bobby.html +* -r6
+example: httrack www.example.com/bob/bobby.html +* -r6
 means get all files starting from bobby.html, with 6 link-depth, and possibility of going everywhere on the web
 
-example: httrack www.someweb.com/bob/bobby.html --spider -P proxy.myhost.com:8080
-runs the spider on www.someweb.com/bob/bobby.html using a proxy
+example: httrack www.example.com/bob/bobby.html --spider -P proxy.myhost.com:8080
+runs the spider on www.example.com/bob/bobby.html using a proxy
 
 example: httrack --update
 updates a mirror in the current folder
@@ -645,14 +645,14 @@ be mirrored, while the '-w' option does not ask this question but asks
 the remainder of the questions required to mirror the site.
 
 <p align=justify> The -g option allows you to get the files exactly as
-they are and store them in the currant directory.  This is handy for a
+they are and store them in the current directory.  This is handy for a
 relatively small collection of information where organization isn't
 important.  With this option, the html files will not even be parsed to
 look for other URLs.  This option is useful for getting isolated files
 (e.g., httrack -g www.mydrivers.com/drivers/windrv32.exe). 
 
 
-<p align=justify> If I start a collection process and it fails for ome
+<p align=justify> If I start a collection process and it fails for one
 reason or another - such as me interrupting it because I am running out
 of disk space - or a network outage - then I can restart the process by
 using the -i option:
@@ -825,7 +825,7 @@ Flow control:
   TN timeout, number of seconds after a non-responding link is shutdown
   RN number of retries, in case of timeout or non-fatal errors (*R1)
   JN traffic jam control, minimum transfert rate (bytes/seconds) tolerated for a link
-  HN host is abandonned if: 0=never, 1=timeout, 2=slow, 3=timeout or slow
+  HN host is abandoned if: 0=never, 1=timeout, 2=slow, 3=timeout or slow
 </i></b>
 
 <p align=justify> This example allows up to 128 simultaneous downloads. 
@@ -859,21 +859,21 @@ With 48 sockets: 1,30MB/s
 With 128 sockets: 0,93MB/s
 </pre></ul>
 
-<p align=justify> The timeout option causes downloads to time out after
-a non-response from a download attempt.  30 seconds is pretty reasonable
-for many sites.  You might want to increase the number of retries as
-well so that you try again and again after such timeouts. 
-
-<pre><b><i>
-httrack http://www.shoesizes.com -O /tmp/shoesizes -%c20
-</i></b></pre>
-
 <p align=justify> This limits the number of connections per second.  It
 is similar to the above option but allows the pace to be controlled
 rather than the simultanaety.  It is particulsrly useful for long-term
 pulls at low rates that allow little impact on remote infrastructure.
 The default is 10 connections per second.
 
+<pre><b><i>
+httrack http://www.shoesizes.com -O /tmp/shoesizes -%c20
+</i></b></pre>
+
+<p align=justify> The timeout option causes downloads to time out after
+a non-response from a download attempt.  30 seconds is pretty reasonable
+for many sites.  You might want to increase the number of retries as
+well so that you try again and again after such timeouts. 
+
 <pre><b><i>
 httrack http://www.shoesizes.com -O /tmp/shoesizes -T30
 </i></b></pre>
@@ -910,7 +910,7 @@ httrack http://www.shoesizes.com -O /tmp/shoesizes -H3
 
 <p align=justify> Of course these options can be combined to provide a
 powerful set of criteria for when to continue a download and when to
-give it up, how hard to push other sites.  and how much to stress
+give it up, how hard to push other sites, and how much to stress
 infrastructures. 
 
 <hr>
@@ -944,7 +944,7 @@ javascript imported files (.js) are not currently searched for URLs.
 httrack http://www.shoesizes.com -O /tmp/shoesizes '%P0'
 </i></b></pre>
 
-<p align=justify> Now here is a classic bit of cleaverness that 'does
+<p align=justify> Now here is a classic bit of cleverness that 'does
 the right thing' for some cases.  In this instance, we are asking
 httrack to get images - like gif and jpeg files that are used by a web
 page in its display, even though we would not normally get them.  For
@@ -1070,18 +1070,18 @@ Details: Option N
   N5 Images/other in web/xxx and HTML in web/HTML
   N99 All files in web/, with random names (gadget !)
   N100 Site-structure, without www.domain.xxx/
-  N101 Identical to N1 exept that "web" is replaced by the site's name
-  N102 Identical to N2 exept that "web" is replaced by the site's name
-  N103 Identical to N3 exept that "web" is replaced by the site's name
-  N104 Identical to N4 exept that "web" is replaced by the site's name
-  N105 Identical to N5 exept that "web" is replaced by the site's name
-  N199 Identical to N99 exept that "web" is replaced by the site's name
-  N1001 Identical to N1 exept that there is no "web" directory
-  N1002 Identical to N2 exept that there is no "web" directory
-  N1003 Identical to N3 exept that there is no "web" directory (option set for g option)
-  N1004 Identical to N4 exept that there is no "web" directory
-  N1005 Identical to N5 exept that there is no "web" directory
-  N1099 Identical to N99 exept that there is no "web" directory
+  N101 Identical to N1 except that "web" is replaced by the site's name
+  N102 Identical to N2 except that "web" is replaced by the site's name
+  N103 Identical to N3 except that "web" is replaced by the site's name
+  N104 Identical to N4 except that "web" is replaced by the site's name
+  N105 Identical to N5 except that "web" is replaced by the site's name
+  N199 Identical to N99 except that "web" is replaced by the site's name
+  N1001 Identical to N1 except that there is no "web" directory
+  N1002 Identical to N2 except that there is no "web" directory
+  N1003 Identical to N3 except that there is no "web" directory (option set for g option)
+  N1004 Identical to N4 except that there is no "web" directory
+  N1005 Identical to N5 except that there is no "web" directory
+  N1099 Identical to N99 except that there is no "web" directory
 </i></b></pre>
 </ul>
 
@@ -1319,7 +1319,7 @@ pages" This is possible, using: -%A asp=text/html
 
 <p align=justify> The -%A option can be replaced by the alias --assume
 asp=text/html which is MUCH more clear.  You can use multiple
-definitions, separed by ",", or use multiple options.  Therefore, these
+definitions, separated by ",", or use multiple options.  Therefore, these
 two lines are identical:
 
 <pre>
@@ -1387,7 +1387,7 @@ web servers leave footprints in the browser.
 Browser ID:
   F  user-agent field (-F "user-agent name")
  %F  footer string in Html code (-%F "Mirrored [from host %s [file %s [at %s]]]"
- %l  preffered language (-%l "fr, en, jp, *" (--language <param>)
+ %l  preferred language (-%l "fr, en, jp, *" (--language <param>)
 </i></b></pre>
 
 <p align=justify> The user-agent field is used by browsers to determine
@@ -1517,7 +1517,7 @@ httrack http://www.shoesizes.com -O /tmp/shoesizes -I0
 httrack http://www.shoesizes.com -O /tmp/shoesizes %v
 </i></b></pre>
 
-<p align=justify> Animated information when using consol-based version,
+<p align=justify> Animated information when using console-based version,
 example:
 <pre>
 17/95: localhost/manual/handler.html (6387 bytes) - OK
@@ -1783,7 +1783,7 @@ based authentication)
 <p align=justify> "On hold" option, in seconds
 
 <pre>
- #Z  Generate transfer rate statictics every minutes
+ #Z  Generate transfer rate statistics every minutes
 </pre>
 
 <p align=justify> Generate a log file with transfer statistics
@@ -1942,7 +1942,7 @@ include (+) and filters that indicate what to exclude (-).
 <p align=justify> Starting with the initially specified URLs, the
 default operation mode is to mirror starting from these URLs downward
 into the directory structure of the host (i.e.  if one of your starting
-pagees was www.all.net/test/a.html, all links starting with www.all.net/test/
+pages was www.all.net/test/a.html, all links starting with www.all.net/test/
 will be collected but links in www.all.net/anything-else will not be
 collected, because they are in a higher directory strcuture level.  This
 prevents HTTrack from mirroring the whole site.  If you may want to
@@ -2054,8 +2054,8 @@ generated automatically using the interface)
         <td>This will accept all zip files in .com addresses</td>
       </tr>
       <tr>
-        <td><b>-*someweb*/*.tar*</b></td>
-        <td>This will refuse all tar (or tar.gz etc.) files in hosts containing someweb</td>
+        <td><b>-*example*/*.tar*</b></td>
+        <td>This will refuse all tar (or tar.gz etc.) files in hosts containing example</td>
       </tr>
       <tr>
         <td><b>+*/*somepage*</b></td>
@@ -2219,7 +2219,7 @@ and so on...
 </b></i></pre>
 
 <p align=justify> In these cases, there is a small probability of a hash
-collision forlarge numbers of files.
+collision for large numbers of files.
 
 <hr>
 

html/filters.html

@@ -109,8 +109,8 @@ See also: The <a href="faq.html#VF1">FAQ</a><br>
 
     <i>You have to know that once you have defined
     starts links, the default mode is to mirror these links - i.e. if one of your start page is
-    www.someweb.com/test/index.html, all links starting with www.someweb.com/test/ will be
-    accepted. But links directly in www.someweb.com/.. will not be accepted, however, because
+    www.example.com/test/index.html, all links starting with www.example.com/test/ will be
+    accepted. But links directly in www.example.com/.. will not be accepted, however, because
     they are in a higher strcuture. This prevent HTTrack from mirroring the whole site. (All
     files in structure levels equal or lower than the primary links will be retrieved.)<br>
     </i>
@@ -278,8 +278,8 @@ See also: The <a href="faq.html#VF1">FAQ</a><br>
         <td>This will refuse/accept all zip files in .com addresses</td>
       </tr>
       <tr>
-        <td nowrap><tt>*someweb*/*.tar*</tt></td>
-        <td>This will refuse/accept all tar (or tar.gz etc.) files in hosts containing someweb</td>
+        <td nowrap><tt>*example*/*.tar*</tt></td>
+        <td>This will refuse/accept all tar (or tar.gz etc.) files in hosts containing example</td>
       </tr>
       <tr>
         <td nowrap><tt>*/*somepage*</tt></td>
@@ -289,13 +289,13 @@ See also: The <a href="faq.html#VF1">FAQ</a><br>
         <td nowrap><tt>*.html</tt></td>
         <td>This will refuse/accept all html files. <br>
         Warning! With this filter you will accept ALL html files, even those in other addresses.
-        (causing a global (!) web mirror..) Use www.someweb.com/*.html to accept all html files from
+        (causing a global (!) web mirror..) Use www.example.com/*.html to accept all html files from
         a web.</td>
       </tr>
       <tr>
         <td nowrap><tt>*.html*[]</tt></td>
         <td>Identical to <tt>*.html</tt>, but the link must not have any supplemental characters
-        at the end (links with parameters, like <tt>www.someweb.com/index.html?page=10</tt>, will be
+        at the end (links with parameters, like <tt>www.example.com/index.html?page=10</tt>, will be
         refused)</td>
       </tr>
     </table>

html/options.html

@@ -131,16 +131,16 @@ This is the default primary scanning option, the engine does not go out of domai
 
 d   stay on the same principal domain
 This option lets the engine go on all sites that exist on the same principal domain.
-Example: a link located at www.someweb.com that goes to members.someweb.com will be followed.
+Example: a link located at www.example.com that goes to members.example.com will be followed.
 
 l   stay on the same location (.com, etc.)
 This option lets the engine go on all sites that exist on the same location.
-Example: a link located at www.someweb.com that goes to www.anyotherweb.com will be followed.
+Example: a link located at www.example.com that goes to www.anyotherweb.com will be followed.
 Warning: this is a potentially dangerous option, limit the recurse depth with r option.
 
 e   go everywhere on the web
 This option lets the engine go on any sites.
-Example: a link located at www.someweb.com that goes to www.anyotherweb.org will be followed.
+Example: a link located at www.example.com that goes to www.anyotherweb.org will be followed.
 Warning: this is a potentially dangerous option, limit the recurse depth with r option.
 
 n   get non-html files 'near' an html file (ex: an image located outside)
@@ -195,19 +195,19 @@ NN  name conversion type (0 *original structure 1,2,3 html/data in one directory
   N99 All files in web/, with random names (gadget !)
 
   N100 Site-structure, without www.domain.xxx/
-  N101 Identical to N1 exept that "web" is replaced by the site's name
-  N102 Identical to N2 exept that "web" is replaced by the site's name
-  N103 Identical to N3 exept that "web" is replaced by the site's name
-  N104 Identical to N4 exept that "web" is replaced by the site's name
-  N105 Identical to N5 exept that "web" is replaced by the site's name
-  N199 Identical to N99 exept that "web" is replaced by the site's name
+  N101 Identical to N1 except that "web" is replaced by the site's name
+  N102 Identical to N2 except that "web" is replaced by the site's name
+  N103 Identical to N3 except that "web" is replaced by the site's name
+  N104 Identical to N4 except that "web" is replaced by the site's name
+  N105 Identical to N5 except that "web" is replaced by the site's name
+  N199 Identical to N99 except that "web" is replaced by the site's name
 
-  N1001 Identical to N1 exept that there is no "web" directory
-  N1002 Identical to N2 exept that there is no "web" directory
-  N1003 Identical to N3 exept that there is no "web" directory (option set for g option)
-  N1004 Identical to N4 exept that there is no "web" directory
-  N1005 Identical to N5 exept that there is no "web" directory
-  N1099 Identical to N99 exept that there is no "web" directory
+  N1001 Identical to N1 except that there is no "web" directory
+  N1002 Identical to N2 except that there is no "web" directory
+  N1003 Identical to N3 except that there is no "web" directory (option set for g option)
+  N1004 Identical to N4 except that there is no "web" directory
+  N1005 Identical to N5 except that there is no "web" directory
+  N1099 Identical to N99 except that there is no "web" directory
 
 LN  long names
   L0 Filenames and directory names are limited to 8 characters + 3 for extension
@@ -272,7 +272,7 @@ RN number of retries, in case of timeout or non-fatal errors (*R0)
 This option sets the maximum number of tries that can be processed for a file
 
 o *generate output html file in case of error (404..) (o0 don't generate)
-This option define whether the engine has to generate html output file or not if an error occured
+This option define whether the engine has to generate html output file or not if an error occurred
 
 TN timeout, number of seconds after a non-responding link is shutdown
 This option define the timeout
@@ -282,8 +282,8 @@ JN traffic jam control, minimum transfert rate (bytes/seconds) tolerated for a l
 This option define the minimum transfer rate
 Example: -J200
 
-HN host is abandonned if: 0=never, 1=timeout, 2=slow, 3=timeout or slow
-This option define whether the engine has to abandon a host if a timeout/"too slow" error occured
+HN host is abandoned if: 0=never, 1=timeout, 2=slow, 3=timeout or slow
+This option define whether the engine has to abandon a host if a timeout/"too slow" error occurred
 
 &P extended parsing, attempt to parse all links (even in unknown tags or Javascript)
 This option activates the extended parsing, that attempt to find links in unknown Html code/javascript

html/plug.html

@@ -207,7 +207,7 @@ Below the list of callbacks, and associated external wrappers.
 <tr><td background="img/fade.gif"><i>receivehead</i></td><td background="img/fade.gif">Called when HTTP headers are recevived from the remote server. The <tt>buff</tt> buffer contains text headers, <tt>adr</tt> and <tt>fil</tt> the URL, and <tt>referer_adr</tt> and <tt>referer_fil</tt> the referer URL. The <tt>incoming</tt> structure contains all information related to the current slot.<br>return value: 1 if the mirror can continue, 0 if the mirror must be aborted</td><td background="img/fade.gif"><tt>int   mycallback(t_hts_callbackarg *carg, httrackp* opt, char* buff, const char* adr, const char* fil, const char* referer_adr, const char* referer_fil, htsblk* incoming);</tt></td></tr>
 
 <tr><td background="img/fade.gif"><i>detect</i></td><td background="img/fade.gif">Called when an unknown document is to be parsed. The <tt>str</tt> structure contains all information related to the document.<br>return value: 1 if the type is known and can be parsed, 0 if the document type is unknown</td><td background="img/fade.gif"><tt>int   mycallback(t_hts_callbackarg *carg, httrackp* opt, htsmoduleStruct* str);</tt></td></tr>
-<tr><td background="img/fade.gif"><i>parse</i></td><td background="img/fade.gif">The <tt>str</tt> structure contains all information related to the document.<br>return value: 1 if the document was successfully parsed, 0 if an error occured</td><td background="img/fade.gif"><tt>int   mycallback(t_hts_callbackarg *carg, httrackp* opt, htsmoduleStruct* str);</tt></td></tr>
+<tr><td background="img/fade.gif"><i>parse</i></td><td background="img/fade.gif">The <tt>str</tt> structure contains all information related to the document.<br>return value: 1 if the document was successfully parsed, 0 if an error occurred</td><td background="img/fade.gif"><tt>int   mycallback(t_hts_callbackarg *carg, httrackp* opt, htsmoduleStruct* str);</tt></td></tr>
 
 
 </table>

html/step9_opt1.html

@@ -118,7 +118,7 @@ h4 { margin: 0;  font-weight: bold;  font-size: 1.18em; }
   </small><br><br>
 <!-- -->
   <li>Test validity of all links</li>
-  <br><small>This option forces the engine to test all links in spidered pages, i.e. to check if every link is valid or not by performing a request to the server. If an error occured, it is reported to the error log-file.
+  <br><small>This option forces the engine to test all links in spidered pages, i.e. to check if every link is valid or not by performing a request to the server. If an error occurred, it is reported to the error log-file.
   <br>Useful to test all external links in a website
   </small><br><br>
 <!-- -->

html/step9_opt11.html

@@ -126,7 +126,7 @@ This is possible, using:
 File type: <tt>asp</tt> MIME identity: <tt>text/html</tt>
 <br>
 <br>
-You can declare multiple definitions, or declare multiple types separed by ",", like in:
+You can declare multiple definitions, or declare multiple types separated by ",", like in:
 <br>
 File type: <tt>asp,php,php3</tt> MIME identity: <tt>text/html</tt>
 <br>

html/step9_opt3.html

@@ -119,7 +119,7 @@ h4 { margin: 0;  font-weight: bold;  font-size: 1.18em; }
   </small><br><br>
 <!-- -->
   <li>Retries</li>
-  <br><small>Number of retries if a non-fatal error occured (timeout, for example)
+  <br><small>Number of retries if a non-fatal error occurred (timeout, for example)
   <br>Note that this will not solve fatal errors such as "Not Found" pages and so on!
   </small><br><br>
 <!-- -->

html/step9_opt5.html

@@ -122,7 +122,7 @@ h4 { margin: 0;  font-weight: bold;  font-size: 1.18em; }
   </small><br><br>
 <!-- -->
   <li>No error pages</li>
-  <br><small>Do not generate error pages (if a 404 error occured, for example)
+  <br><small>Do not generate error pages (if a 404 error occurred, for example)
   <br>If a page is missing on the remote site, there will not be any warning on the local site
   </small><br><br>
 <!-- -->

html/step9_opt8.html

@@ -117,7 +117,7 @@ h4 { margin: 0;  font-weight: bold;  font-size: 1.18em; }
   <li>HTML Footer</li>
   <br><small>Enter here the optionnal text that will be included as a comment in each HTML file to make archiving easier
   <br>The string entered is generally an HTML comment (<tt>&lt;!-- HTML comment --&gt;</tt>) with optionnal %s, which will be transformed into a specific string information:
-  <br>%s #1 : host name (for example, www.someweb.com)
+  <br>%s #1 : host name (for example, www.example.com)
   <br>%s #2 : file name (for example, /index.html)
   <br>%s #3 : date of the mirror
   <br><b>Example</b>: <tt>&lt;!-- Page mirrored from %s, file %s. Archive date: %s --&gt;</tt>

html/step9_opt9.html

@@ -122,7 +122,7 @@ h4 { margin: 0;  font-weight: bold;  font-size: 1.18em; }
 <!-- -->
   <li>Create Log files</li>
   <br><small>Create log file where informations, error and warnings about the current mirror will be saved
-  <br>If you <b>do not</b> generate log files, you will not be able to know what errors occured!
+  <br>If you <b>do not</b> generate log files, you will not be able to know what errors occurred!
   <br>It is strongly advised to leave this option checked
   <br>Note: You can define the debug-level of the log-files. Default is "normal"
   </small><br><br>

install-sh

@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2011-01-19.21; # UTC
+scriptversion=2020-11-14.01; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,25 +35,21 @@ scriptversion=2011-01-19.21; # UTC
 # FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
 # from scratch.
 
+tab='	'
 nl='
 '
-IFS=" ""	$nl"
+IFS=" $tab$nl"
 
-# set DOITPROG to echo to test this script
+# Set DOITPROG to "echo" to test this script.
 
-# Don't use :- since 4.3BSD and earlier shells don't like it.
 doit=${DOITPROG-}
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
+doit_exec=${doit:-exec}
 
 # Put in absolute file names if you don't have them in your path;
 # or use environment vars.
@@ -68,22 +64,16 @@ mvprog=${MVPROG-mv}
 rmprog=${RMPROG-rm}
 stripprog=${STRIPPROG-strip}
 
-posix_glob='?'
-initialize_posix_glob='
-  test "$posix_glob" != "?" || {
-    if (set -f) 2>/dev/null; then
-      posix_glob=
-    else
-      posix_glob=:
-    fi
-  }
-'
-
 posix_mkdir=
 
 # Desired mode of installed file.
 mode=0755
 
+# Create dirs (including intermediate dirs) using mode 755.
+# This is like GNU 'install' as of coreutils 8.32 (2020).
+mkdir_umask=22
+
+backupsuffix=
 chgrpcmd=
 chmodcmd=$chmodprog
 chowncmd=
@@ -97,7 +87,7 @@ dir_arg=
 dst_arg=
 
 copy_on_change=false
-no_target_directory=
+is_target_a_directory=possibly
 
 usage="\
 Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
@@ -114,18 +104,28 @@ Options:
      --version  display version info and exit.
 
   -c            (ignored)
-  -C            install only if different (preserve the last data modification time)
+  -C            install only if different (preserve data modification time)
   -d            create directories instead of installing files.
   -g GROUP      $chgrpprog installed files to GROUP.
   -m MODE       $chmodprog installed files to MODE.
   -o USER       $chownprog installed files to USER.
+  -p            pass -p to $cpprog.
   -s            $stripprog installed files.
+  -S SUFFIX     attempt to back up existing files, with suffix SUFFIX.
   -t DIRECTORY  install into DIRECTORY.
   -T            report an error if DSTFILE is a directory.
 
 Environment variables override the default commands:
   CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
   RMPROG STRIPPROG
+
+By default, rm is invoked with -f; when overridden with RMPROG,
+it's up to you to specify -f if you want it.
+
+If -S is not specified, no backups are attempted.
+
+Email bug reports to bug-automake@gnu.org.
+Automake home page: https://www.gnu.org/software/automake/
 "
 
 while test $# -ne 0; do
@@ -137,46 +137,62 @@ while test $# -ne 0; do
     -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-	shift;;
+        shift;;
 
     --help) echo "$usage"; exit $?;;
 
     -m) mode=$2
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *'['*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-	shift;;
+        case $mode in
+          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+            echo "$0: invalid mode: $mode" >&2
+            exit 1;;
+        esac
+        shift;;
 
     -o) chowncmd="$chownprog $2"
-	shift;;
+        shift;;
+
+    -p) cpprog="$cpprog -p";;
 
     -s) stripcmd=$stripprog;;
 
-    -t) dst_arg=$2
-	# Protect names problematic for `test' and other utilities.
-	case $dst_arg in
-	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
-	esac
-	shift;;
+    -S) backupsuffix="$2"
+        shift;;
 
-    -T) no_target_directory=true;;
+    -t)
+        is_target_a_directory=always
+        dst_arg=$2
+        # Protect names problematic for 'test' and other utilities.
+        case $dst_arg in
+          -* | [=\(\)!]) dst_arg=./$dst_arg;;
+        esac
+        shift;;
+
+    -T) is_target_a_directory=never;;
 
     --version) echo "$0 $scriptversion"; exit $?;;
 
-    --)	shift
-	break;;
+    --) shift
+        break;;
 
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
+    -*) echo "$0: invalid option: $1" >&2
+        exit 1;;
 
     *)  break;;
   esac
   shift
 done
 
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+  if test -n "$dst_arg"; then
+    echo "$0: target directory not allowed when installing a directory." >&2
+    exit 1
+  fi
+fi
+
 if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
   # When -d is used, all remaining arguments are directories to create.
   # When -t is used, the destination is already specified.
@@ -190,7 +206,7 @@ if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
     fi
     shift # arg
     dst_arg=$arg
-    # Protect names problematic for `test' and other utilities.
+    # Protect names problematic for 'test' and other utilities.
     case $dst_arg in
       -* | [=\(\)!]) dst_arg=./$dst_arg;;
     esac
@@ -202,11 +218,20 @@ if test $# -eq 0; then
     echo "$0: no input file specified." >&2
     exit 1
   fi
-  # It's OK to call `install-sh -d' without argument.
+  # It's OK to call 'install-sh -d' without argument.
   # This can happen when creating conditional directories.
   exit 0
 fi
 
+if test -z "$dir_arg"; then
+  if test $# -gt 1 || test "$is_target_a_directory" = always; then
+    if test ! -d "$dst_arg"; then
+      echo "$0: $dst_arg: Is not a directory." >&2
+      exit 1
+    fi
+  fi
+fi
+
 if test -z "$dir_arg"; then
   do_exit='(exit $ret); exit $ret'
   trap "ret=129; $do_exit" 1
@@ -223,16 +248,16 @@ if test -z "$dir_arg"; then
 
     *[0-7])
       if test -z "$stripcmd"; then
-	u_plus_rw=
+        u_plus_rw=
       else
-	u_plus_rw='% 200'
+        u_plus_rw='% 200'
       fi
       cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
     *)
       if test -z "$stripcmd"; then
-	u_plus_rw=
+        u_plus_rw=
       else
-	u_plus_rw=,u+rw
+        u_plus_rw=,u+rw
       fi
       cp_umask=$mode$u_plus_rw;;
   esac
@@ -240,7 +265,7 @@ fi
 
 for src
 do
-  # Protect names problematic for `test' and other utilities.
+  # Protect names problematic for 'test' and other utilities.
   case $src in
     -* | [=\(\)!]) src=./$src;;
   esac
@@ -250,6 +275,10 @@ do
     dstdir=$dst
     test -d "$dstdir"
     dstdir_status=$?
+    # Don't chown directories that already exist.
+    if test $dstdir_status = 0; then
+      chowncmd=""
+    fi
   else
 
     # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
@@ -266,178 +295,148 @@ do
     fi
     dst=$dst_arg
 
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
+    # If destination is a directory, append the input filename.
     if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dst_arg: Is a directory" >&2
-	exit 1
+      if test "$is_target_a_directory" = never; then
+        echo "$0: $dst_arg: Is a directory" >&2
+        exit 1
       fi
       dstdir=$dst
-      dst=$dstdir/`basename "$src"`
+      dstbase=`basename "$src"`
+      case $dst in
+	*/) dst=$dst$dstbase;;
+	*)  dst=$dst/$dstbase;;
+      esac
       dstdir_status=0
     else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)[^/].*/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\).*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
+      dstdir=`dirname "$dst"`
       test -d "$dstdir"
       dstdir_status=$?
     fi
   fi
 
+  case $dstdir in
+    */) dstdirslash=$dstdir;;
+    *)  dstdirslash=$dstdir/;;
+  esac
+
   obsolete_mkdir_used=false
 
   if test $dstdir_status != 0; then
     case $posix_mkdir in
       '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *[2367][2367]) mkdir_umask=$umask;;
-	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+        # With -d, create the new directory with the user-specified mode.
+        # Otherwise, rely on $mkdir_umask.
+        if test -n "$dir_arg"; then
+          mkdir_mode=-m$mode
+        else
+          mkdir_mode=
+        fi
 
-	  *[0-7])
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
+        posix_mkdir=false
+	# The $RANDOM variable is not portable (e.g., dash).  Use it
+	# here however when possible just to lower collision chance.
+	tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
 
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
+	trap '
+	  ret=$?
+	  rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
+	  exit $ret
+	' 0
+
+	# Because "mkdir -p" follows existing symlinks and we likely work
+	# directly in world-writeable /tmp, make sure that the '$tmpdir'
+	# directory is successfully created first before we actually test
+	# 'mkdir -p'.
+	if (umask $mkdir_umask &&
+	    $mkdirprog $mkdir_mode "$tmpdir" &&
+	    exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+	then
+	  if test -z "$dir_arg" || {
+	       # Check for POSIX incompatibilities with -m.
+	       # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+	       # other-writable bit of parent directory when it shouldn't.
+	       # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+	       test_tmpdir="$tmpdir/a"
+	       ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+	       case $ls_ld_tmpdir in
+		 d????-?r-*) different_mode=700;;
+		 d????-?--*) different_mode=755;;
+		 *) false;;
+	       esac &&
+	       $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+		 ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+		 test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+	       }
+	     }
+	  then posix_mkdir=:
+	  fi
+	  rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
 	else
-	  mkdir_mode=
+	  # Remove any dirs left behind by ancient mkdir implementations.
+	  rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
 	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *[123567][0-7][0-7])
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
+	trap '' 0;;
     esac
 
     if
       $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+        umask $mkdir_umask &&
+        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
       )
     then :
     else
 
-      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # mkdir does not conform to POSIX,
       # or it failed possibly due to a race condition.  Create the
       # directory the slow way, step by step, checking for races as we go.
 
       case $dstdir in
-	/*) prefix='/';;
-	[-=\(\)!]*) prefix='./';;
-	*)  prefix='';;
+        /*) prefix='/';;
+        [-=\(\)!]*) prefix='./';;
+        *)  prefix='';;
       esac
 
-      eval "$initialize_posix_glob"
-
       oIFS=$IFS
       IFS=/
-      $posix_glob set -f
+      set -f
       set fnord $dstdir
       shift
-      $posix_glob set +f
+      set +f
       IFS=$oIFS
 
       prefixes=
 
       for d
       do
-	test X"$d" = X && continue
+        test X"$d" = X && continue
 
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
+        prefix=$prefix$d
+        if test -d "$prefix"; then
+          prefixes=
+        else
+          if $posix_mkdir; then
+            (umask $mkdir_umask &&
+             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+            # Don't fail if two instances are running concurrently.
+            test -d "$prefix" || exit 1
+          else
+            case $prefix in
+              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+              *) qprefix=$prefix;;
+            esac
+            prefixes="$prefixes '$qprefix'"
+          fi
+        fi
+        prefix=$prefix/
       done
 
       if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
+        # Don't fail if two instances are running concurrently.
+        (umask $mkdir_umask &&
+         eval "\$doit_exec \$mkdirprog $prefixes") ||
+          test -d "$dstdir" || exit 1
+        obsolete_mkdir_used=true
       fi
     fi
   fi
@@ -450,14 +449,25 @@ do
   else
 
     # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
+    dsttmp=${dstdirslash}_inst.$$_
+    rmtmp=${dstdirslash}_rm.$$_
 
     # Trap to clean up those temp files at exit.
     trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
 
     # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+    (umask $cp_umask &&
+     { test -z "$stripcmd" || {
+	 # Create $dsttmp read-write so that cp doesn't create it read-only,
+	 # which would cause strip to fail.
+	 if test -z "$doit"; then
+	   : >"$dsttmp" # No need to fork-exec 'touch'.
+	 else
+	   $doit touch "$dsttmp"
+	 fi
+       }
+     } &&
+     $doit_exec $cpprog "$src" "$dsttmp") &&
 
     # and set any options; do chmod last to preserve setuid bits.
     #
@@ -472,20 +482,24 @@ do
 
     # If -C, don't bother to copy if it wouldn't change the file.
     if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
-
-       eval "$initialize_posix_glob" &&
-       $posix_glob set -f &&
+       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
+       set -f &&
        set X $old && old=:$2:$4:$5:$6 &&
        set X $new && new=:$2:$4:$5:$6 &&
-       $posix_glob set +f &&
-
+       set +f &&
        test "$old" = "$new" &&
        $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
     then
       rm -f "$dsttmp"
     else
+      # If $backupsuffix is set, and the file being installed
+      # already exists, attempt a backup.  Don't worry if it fails,
+      # e.g., if mv doesn't support -f.
+      if test -n "$backupsuffix" && test -f "$dst"; then
+        $doit $mvcmd -f "$dst" "$dst$backupsuffix" 2>/dev/null
+      fi
+
       # Rename the file to the real destination.
       $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
 
@@ -493,24 +507,24 @@ do
       # to itself, or perhaps because mv is so ancient that it does not
       # support -f.
       {
-	# Now remove or move aside any old file at destination location.
-	# We try this two ways since rm can't unlink itself on some
-	# systems and the destination file might be busy for other
-	# reasons.  In this case, the final cleanup might fail but the new
-	# file should still install successfully.
-	{
-	  test ! -f "$dst" ||
-	  $doit $rmcmd -f "$dst" 2>/dev/null ||
-	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-	  } ||
-	  { echo "$0: cannot unlink or rename $dst" >&2
-	    (exit 1); exit 1
-	  }
-	} &&
+        # Now remove or move aside any old file at destination location.
+        # We try this two ways since rm can't unlink itself on some
+        # systems and the destination file might be busy for other
+        # reasons.  In this case, the final cleanup might fail but the new
+        # file should still install successfully.
+        {
+          test ! -f "$dst" ||
+          $doit $rmcmd "$dst" 2>/dev/null ||
+          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+            { $doit $rmcmd "$rmtmp" 2>/dev/null; :; }
+          } ||
+          { echo "$0: cannot unlink or rename $dst" >&2
+            (exit 1); exit 1
+          }
+        } &&
 
-	# Now rename the file to the real destination.
-	$doit $mvcmd "$dsttmp" "$dst"
+        # Now rename the file to the real destination.
+        $doit $mvcmd "$dsttmp" "$dst"
       }
     fi || exit 1
 
@@ -519,9 +533,9 @@ do
 done
 
 # Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
 # time-stamp-end: "; # UTC"
 # End:

lang.def

@@ -56,6 +56,8 @@ Finnish
 LANGUAGE_28
 Croatian
 LANGUAGE_29
+Uzbek
+LANGUAGE_30
 LANGUAGE_NAME
 LANGUAGE_NAME
 LANGUAGE_FILE
@@ -255,7 +257,7 @@ Site mirroring in progress [%s, %s bytes]
 LANG_F18b
 Site mirroring finished!
 LANG_F19
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 LANG_F20
 \nDuring:\n
 LANG_F21
@@ -265,7 +267,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 LANG_F22b
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 LANG_F22c
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 LANG_F23
 \n\nTip: Click [View log file] to see warning or error messages
 LANG_F24
@@ -1003,4 +1005,4 @@ You can now close this window
 LANG_SERVEND
 Server terminated
 LANG_FATALERR
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror

lang.indexes

@@ -27,3 +27,4 @@ si:24
 sv:17
 tr:10
 uk:22
+uz:30

lang/Bulgarian.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 Ïðîãðåñ íà ñúçäàâàíåòî íà îãëåäàëíèÿ ñàéò [%s, %s áàéòà]
 Site mirroring finished!
 Ñúäàâàíåòî íà îãëåäàëíèÿ ñàéò çàâúðøè!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Âúçíèêíà ïðîáëåì ïî âðåìå íà ñúçäàâàíåòî íà îãëåäàëíèÿ ñàéò\n
 \nDuring:\n
 \nÏî âðåìå íà:\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Ñúçäàâàíåòî íà îãëåäàëíèÿ ñàéò çàâúðøè!\nÊëèêíè Èçõîä çà çàòâàðÿíå íà WinHTTrack.\nÂèæòå log-ôàéëîâåòå äà ñà ñå óâåðèòå, ÷å âñè÷êî å íàðåä.\n\nÁëàãîäàðèì, Âè, ÷å èçïîëçâàòå WinHTTrack!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * ÊÎÏÈÐÀÍÅÒÎ ÏÐÅÊÚÑÍÀÒÎ! * *\r\nÒåêóùèÿò âðåìåíåí êåø å íåîáõîäèì çà âñÿêàêâè îáíîâëåíèÿ è ñúäúðæà ñàìî äàííè ñâàëåíè ïî âðåìå íà òàçè ïðåêúñíàòà ñåñèÿ.\r\nÂúçìîæíî å ïðåäøåñòâàùèÿò êåø äà ñúäúðæà ïî-ïúëíà èíôîðìàöèÿ; àêî íå æåëàåòå çà çàãóáèòå òàçè èíôîðìàöèÿ, òðÿáâà äà ÿ âúçñòàíîâèòå è èçòðèåòå òåêóùèÿ êåø.\r\n[Çàáåëåæêà: Òîâà ìîæå äà áúäå ïîñòèãíàòî ëåñíî ÷ðåç èçòðèâàíå íà hts-cache/new.* ôàéëîâåòå]\r\n\r\nÏðåäïîëàãàòå ëè, ÷å ïðåäøåñòâàùèÿ êåø ñúäúðæà ïî ïúëíà èíôîðìàöèÿ è æåëàåòå ëè äà ÿ âúçñòàíîâèòå?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * ÃÐÅØÊÀ ÏÐÈ ÊÎÏÈÐÀÍÅÒÎ! * *\r\nÒåêóùèÿò ñàéò å ïðàçåí.Àêî äåéñòâèåòî å áèëî îáíîâëåíèå, òî ïðåäõîäíîòî îãëåäàëíî êîïèå å âúçñòàíîâåíî.\r\nÏðè÷èíà: ïúðâàòà ñòðàíèöà(è) èëè íå áå îòêðèòà, èëè å âúçíèêíàë ïðîáëåì ñ âðúçêàòà.\r\n=>Óâåðåòå ñå, ÷å òîçè ñàéò âñå îùå ñúùåñòâóâà è/èëè ïðîâåðåòå Âàøèòå proxy íàñòðîéêè! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \n\nÑúâåò: Êëèêíè [Âèæ log-ôàéë] çà ïðåäóïðåäèòåëíèòå ñúîáùåíèÿ èëè ñúîáùåíèÿòà çà ãðåøêè
@@ -926,5 +926,5 @@ You can now close this window
 Ñåãà ìîæåòå äà çàòâîðèòå òîçè ïðîçîðåö
 Server terminated
 Ñúðâúðúò íå îòãîâàðÿ
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 Ôàòàëíà ãðåøêà ïðè ñúçäàâàíåòî íà òîçè îãëåäàëåí ñàéò

lang/Castellano.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 Volcado en ejecución [%s, %s bytes]
 Site mirroring finished!
 ¡Copia del sitio finalizada!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Ha ocurrido un problema durante el volcado\n
 \nDuring:\n
 \nDurante:\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 El volcado ha finalizado.\nPulse OK para salir de WinHTTrack\n\nConsulte los ficheros de auditoría para verificar que todo ha salido bien\n\n¡Gracias por utilizar WinHTTrack!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * ¡COPIA INTERRUMPIDA! * *\r\nEs necesario el cache temporal actual para cualquier operación de actualización y solamente contiene datos bajados durante la presente sesión abortada.\r\nEl antiguo cache puede contener datos más completos; si vd. no desea perder dichos datos, deberá que restaurarlo y excluir el cache actual.\r\n[Nota: Esto puede hacerse fácilmente aquí excluyendo el hts-cache/nuevo.* ficheros]\r\n\r\n¿Cree que el antiguo cache puede contener datos más completos, y desea restaurarlo?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * ¡ERROR DE VOLCADO! * *\r\nHTTrack ha detectado que el volcado actual está vacío. Si se trataba de una actualización, el volcado anterior ha sido recuperado.\r\nRazón: no se ha(n) encontrado la(s) primera(s) página(s), o ha habido un problema de conexión.\r\n=> Asegúrese de que el sitio web existe aún, y/o compruebe los ajustes de su proxy! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \n\nConsejo: Pulse [Ver ficheros auditoría] para ver los errores y mensajes
@@ -926,5 +926,5 @@ You can now close this window
 Ya puede cerrar esta ventana
 Server terminated
 Servidor desconectado
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 Ha ocurrido un error fatal durante esta copia

lang/Cesky.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 Probíhá stahování stránek [%s, %s bajtù]
 Site mirroring finished!
 Stahování stránek skonèeno!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Pøi stahování se vyskytl problém\n
 \nDuring:\n
 \nBìhem:\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Stahování skonèeno.\nKlikni na Konec pro ukonèení programu WinHTTrack.\nZobraz si protokoly pro kontrolu chyb pøi stahování.\n\nDíky za použití programu WinHTTrack!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * STAHOVÁNÍ ZRUŠENO! * *\r\nPro pokraèování stahování je zapotøebí lokální cache, obsahující stažená data.\r\nPøedchozí cache mùže obsahovat více informací. Pokud je nechceš ztratit, musíš ji obnovit a smazat aktuální cache.\r\n[Poznámka: To mùže být provedeno teï smazáním hts-cache/new.* souborù]\r\n\r\nMyslíš, že cache obsahuje více informací a pøeješ si ji obnovit?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * CHYBA PØI STAHOVÁNÍ! * *\r\nHTTrack zjistil, že se nestáhla žádná data. Pokud se jednalo o aktualizaci, pak pøedešlá data byla obnovena.\r\nDùvod: Nemohla být nalezena první stránka nebo se vyskytl problém se spojením.\r\n=>Provìø zda zadaná adresa existuje anebo zkontroluj nastavení proxy! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \n\nTip: Klikni [Zobraz protokoly] pro zobrazení upozornìní a chyb
@@ -926,5 +926,5 @@ You can now close this window
 
 Server terminated
 
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 

lang/Chinese-BIG5.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 站點鏡像進行中 [%s, %s byts]
 Site mirroring finished!
 站點鏡像完畢!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 鏡像時發生錯誤\n
 \nDuring:\n
 \n發生在以下期間:\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 鏡像完成.\n點擊'確定'以離開WinHTTrack.\n如有需要請看日誌檔案, 以確保萬無一失.\n\n謝謝使用WinHTTrack!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * 鏡像被取消! * *\r\n當前臨時的預存區為日後更新所需, 僅存有此次被中斷的鏡像期間內下載的數據.\r\n而原有預存區可能會存有更完整的內容; 如果你不想失去原有的數據, 請恢復之, 并刪除當前預存區.\r\n[注: 欲刪除當前預存區, 僅需刪除以下檔案: hts-cache/new.*]\r\n\r\n你是否肯定原有預存區存有更完整的內容, 并希望恢復之?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * 鏡像出錯!* *\r\nHTTrack檢測到當前鏡像未儲存任何數據. 若使用的更新模式, 則前一次鏡像已被恢復.\r\n原因: 首頁未能找到, 或發生連線錯誤.\r\n=> 請確定欲鏡像的網站存在, 并/或檢查proxy設定! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \n\n提示: 點擊 [查看日誌檔案] 以查看警告或錯誤消息
@@ -926,5 +926,5 @@ You can now close this window
 你現在可以關閉這視窗
 Server terminated
 伺服器已終止
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 這鏡像發生了不可回復的錯誤

lang/Chinese-Simplified.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 站点镜像进行中 [%s, %s 字节]
 Site mirroring finished!
 站点镜像完毕!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 镜像时发生错误\n
 \nDuring:\n
 \n发生在以下期间:\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 镜像完成.\n点击'确定'以退出WinHTTrack.\n如有需要请看日志文件, 以确保万无一失.\n\n谢谢使用WinHTTrack!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * 镜像被取消! * *\r\n当前临时的预存区为日后更新所需, 仅存有此次被中断的镜像期间内下载的数据.\r\n而原有预存区可能会存有更完整的内容; 如果你不想失去原有的数据, 请恢复之, 并删除当前预存区.\r\n[注: 欲删除当前预存区, 仅需删除以下文件: hts-cache/new.*]\r\n\r\n你是否肯定原有预存区存有更完整的内容, 并希望恢复之?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * 镜像出错!* *\r\nHTTrack检测到当前镜像未储存任何数据. 若使用的更新模式, 则前一次镜像已被恢复.\r\n=> 原因: 首页未能找到, 或发生连接错误.\r\n请确定欲镜像的网站存在, 并/或检查代理设置! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \n\n提示: 点击 [察看日志文件] 以察看警告或错误消息
@@ -926,5 +926,5 @@ You can now close this window
 
 Server terminated
 
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 

lang/Croatian.txt

@@ -196,7 +196,7 @@ Site mirroring in progress [%s, %s bytes]
 Zrcaljenje sadržaja je u tijeku [%s, %s bajta]
 Site mirroring finished!
 Zrcaljenje sadržaja je završeno!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Tijekom zrcaljenja je nastao jedan problem\n
 \nDuring:\n
 \nTrajanje:\n
@@ -206,7 +206,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Zrcaljenje je dovršeno.\nKliknite na Svršetak za okonèavanje rada s WinHTTrackom.\nPogledajte po potrebi u zapisnik(e) kako bi se uvjerili da je sve u redu.\n\nHvala Vam na uporabi WinHTTracka!!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * ZRCALJENJE JE PREKINUTO! * *\r\nTekuæi privremeni meðuspremnik æe biti potreban za neku buduæu aktualizaciju i sadrži samo podatke, koji su preuzeti tijekom upravo prekinutog zasjedanja.\r\nPrethodni meðuspremnik možda sadrži potpunije podatke; ukoliko te podatke ne želite izgubiti, morate ih ponovno uspostaviti i izbrisati tekuæi meðuspremnik.\r\n[Napomena: To se jednostavno može napraviti brisanjem datoteka hts-cache/new.*]\r\n\r\nMislite li da ovom zasjedanju prethodeæi meðuspremnik može sadržavati potpunije podatke, i želite li ga ponovno uspostaviti?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * POGREŠKA PRI ZRCALJENJU! * *\r\nHTTrack je zapazio da je tekuæe zrcalo prazno. Ukoliko je to bila neka dogradnja, onda je prethodno zrcalo ponovno uspostavljeno.\r\nRazlog: ili prva stranica nije mogla biti pronaðena, ili se pak pojavio neki problem.\r\n=> Uvjerite se da dotièno mrežno mjesto još uvijek postoji, i/ili provjerite postavke Vašeg usmjerivaèa! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \n\nPreporuka: Kliknite na [Prikazati zapisnièke datoteke], kako bi vidjeli upozorenja ili dojave pogreški
@@ -928,5 +928,5 @@ You can now close this window
 Sada možete zatvoriti ovo okno
 Server terminated
 Poslužitelj je razriješen
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 Tijekom ovog zrcaljenja je nastala fatalna pogreška

lang/Deutsch.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 Spiegelung der Website läuft [%s, %s Byte]
 Site mirroring finished!
 Kopiervorgang beendet
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Beim Kopieren der Webseiten ist ein Problem aufgetreten\n
 \nDuring:\n
 \r\n\nWährend:\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Kopiervorgang abgeschlossen.\n'Beenden' beendet WinHTTrack.\nIn den Protokolldateien können Sie prüfen, ob Probleme auftraten.\n\nDanke, dass Sie WinHTTrack benutzt haben!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * KOPIERVORGANG ABGEBROCHEN! * *\r\nDer aktuelle temporäre Cache wird für eine künftige Aktualisierung gebraucht. Er enthält nur Daten, die während der soeben abgebrochenen Sitzung heruntergeladen wurden.\r\nEin früher angelegter Cache enthält unter Umständen vollständigere Informationen; wenn Sie diese nicht verlieren wollen, müssen Sie sie wiederherstellen und den aktuellen Cache löschen.\r\n[Hinweis: Dazu werden einfach die Dateien hts-cache/new.* gelöscht]\r\n\r\nWollen Sie den vor dieser Sitzung erzeugten Cache wiederherstellen?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * FEHLER BEIM KOPIEREN! * *\r\nDie aktuelle Webseitenkopie ist leer. Wenn es sich um eine Aktualisierung gehandelt hat, ist die letzte Kopie wiederhergestellt worden.\r\nMögliche Ursachen: Entweder wurde(n) die erste(n) Seite(n) nicht gefunden, oder es gab ein Problem mit der Verbindung.\r\n=> Vergewissern Sie sich, dass die Website noch existiert, und/oder überprüfen Sie die Einstellungen für den Proxy! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \r\n\n\nTipp: Ein Klick auf [Protokoll zeigen] zeigt Warnungen und Fehlermeldungen an
@@ -926,5 +926,5 @@ You can now close this window
 Sie können dieses Fenster jetzt schließen
 Server terminated
 Der Server wurde beendet
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 Fataler Fehler während der Webseiten-Kopie

lang/Eesti.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 Saidi kopeerimine [%s, %s baiti]
 Site mirroring finished!
 Saidikopeerimine on lõpetatud!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Saidikopeerimise käigus tekkis probleem\n
 \nDuring:\n
 \nOperatsioonil:\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Kopeerimisoperatsioon on lõpetatud.\nKliki Välju, et sulgeda WinHTTrack.\nVaata logifaili veendumaks, et kõik on korras.\n\nTänan WinHTTrack'i kasutamise eest!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * KOPEERIMINE KATKESTATUD! * *\r\nPraegune ajutine cache on vajalik igasuguse uuendamise jaoks ja sisaldab ainult käesoleva katkestatud seansi jooksul tiritud andmeid.\r\nEelmine cache võib sisaldada põhjalikumat informatsiooni; kui sa ei taha seda informatsiooni kaotada, tuleb see taastada ja kustutada praegune cache.\r\n[Märkus: Seda on siin lihtne teha, kustutades hts-cache/new.* failid]\r\n\r\nKas arvad, et eelmine cache võib sisaldada põhjalikumat informatsiooni, ja kas tahad seda taastada?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * KOPEERIMISE VIGA! * *\r\nHTTrack leidis, et praegune veebikoopia on tühi. Kui see on uuendus, taastatakse eelmine koopia.\r\nPõhjus: esimest lehekülge ei leitud, või on ühenduse probleemid.\r\n=> Veendu, et veebisait ikka alles on, ja/või kontrolli proxy seadistust! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \n\nVihje: Hoiatuste ja veateadete nägemiseks kliki [Vaata logifaili]
@@ -926,5 +926,5 @@ You can now close this window
 
 Server terminated
 
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 

lang/English.txt

@@ -196,8 +196,8 @@ Site mirroring in progress [%s, %s bytes]
 Site mirroring in progress [%s, %s bytes]
 Site mirroring finished!
 Site mirroring finished!
-A problem occured during the mirroring operation\n
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 \nDuring:\n
 \nDuring:\n
 \nSee the log file if necessary.\n\nClick FINISH to quit WinHTTrack Website Copier.\n\nThanks for using WinHTTrack!
@@ -206,8 +206,8 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) if necessary to ensure that everything is OK.\n\nThanks for using WinHTTrack!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \n\nTip: Click [View log file] to see warning or error messages
 Error deleting a hts-cache/new.* file, please do it manually
@@ -944,8 +944,8 @@ You can now close this window
 You can now close this window
 Server terminated
 Server terminated
-A fatal error has occured during this mirror
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
+A fatal error has occurred during this mirror
 View Documentation
 View Documentation
 Go To HTTrack Website

lang/Finnish.txt

@@ -196,7 +196,7 @@ Site mirroring in progress [%s, %s bytes]
 Sivun peilaus käynnissä [%s, %s tavua]
 Site mirroring finished!
 Sivun peilaus valmis!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Ongelma peilausoperaation aikana\n
 \nDuring:\n
 \nAikana:\n
@@ -206,7 +206,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Peilausoperaatio valmis.\nPaina poistu sulkeaksesi WinHTTrackin.\nKatso lokitiedosto(j)a varmistaaksesi, että kaikki on kunnossa.\n\nKiitoksia WinHTTrackin käytöstä!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * PEILI KESKEYTETTY! * *\r\nNykyistä välimuistia tarvitaan päivitysoperaatioihin ja se sisältää tietoa vain äsken keskeytetystä imuroinnista.\r\nAiempi välimuisti saattaa sisältää täydellisempää tietoa; jos et halua menettää tätä tietoa, sinun pitää palauttaa se ja poistaa nykyinen välimuisti.\r\n[Huomaa: Tämän voi helposti tehdä nyt poistamalla hts-cache/new.*-tiedostot]\r\n\r\nLuuletko, että edellinen välimuisti sisältäisi täydellisempää tietoa, ja että haluat palauttaa sen?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * PEILIVIRHE! * *\r\nHTTrack huomasi, että nykyinen peili on tyhjä. Jos se oli päivitys, edellinen peli on palautettu.\r\nSyy: ensimmäiset sivut eivät löytyneet tai tapahtui yhteysvirhe.\r\n=> Varmista että nettisivu on yhä olemassa ja tarkista välityspalvelinasetuksesi! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \n\nVinkki: Paina [Näytä lokitiedosto] nähdäksesi varoitus- ja virheviestit
@@ -928,6 +928,6 @@ You can now close this window
 Voit nyt sulkea tämän ikkunan
 Server terminated
 Palvelin lopetettu
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 Tällä peilillä tapahtui vakava virhe
 

lang/Francais.txt

@@ -196,7 +196,7 @@ Site mirroring in progress [%s, %s bytes]
 Copie du site en cours (%s, %s octets)
 Site mirroring finished!
 Copie du site terminée!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Incident durant la copie du site\n
 \nDuring:\n
 Durant:\n
@@ -206,7 +206,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 la copie du site est terminée\nCliquez sur OK pour quitter WinHTTrack\nConsultez au besoin les fichiers journaux pour vérifier que tout s'est bien passé\n\nMerci d'utiliser WinHTTrack!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * COPIE INTERROMPUE! * *\r\nLe cache temporaire actuel est nécessaire pour toute mise à jour et ne contient que les données téléchargées durant la présente session interrompue.\r\nIl est possible que le cache précédent contienne des données plus complètes; si vous ne voulez pas perdre ces données, vous devez le restaurer et effacer le cache actuel.\r\n[Note: Cette opération peut être facilement effectuée ici en effacant les fichiers hts-cache/new.*]\r\n\r\nPensez-vous que le cache précédent pourrait contenir des informations plus complètes, et voulez-vous le restaurer?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * ERREUR DE COPIE! * *\r\nHTTrack a détecté que la copie courante était vide. Si il s'agissait d'une mise à jour, l'ancienne copie a été restaurée.\r\nRaison: soit la (les) première(s) page(s) n'ont pu être téléchargées, soit un problème de connexion est survenu.\r\n=> Vérifiez que le site existe toujours, et/ou vérifiez les réglages du proxy! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \nConseil: sélectionnez la commande 'Voir le fichier journal' pour visionner les messages d'erreur et d'avertissement
@@ -936,7 +936,7 @@ You can now close this window
 Vous pouvez maintenant fermer cette fenêtre
 Server terminated
 Serveur arrêté
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 Une erreur critique est intervenue durant l'aspiration
 View Documentation
 Lire la documentation

lang/Greek.txt

@@ -196,7 +196,7 @@ Site mirroring in progress [%s, %s bytes]
 Αντιγραφή τοποθεσίας σε εξέλιξη [%s, %s bytes]
 Site mirroring finished!
 Η αντιγραφή της τοποθεσίας τελείωσε!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Δημιουργήθηκε ένα πρόβλημα κατά την διαδικασία αντιγραφής\n
 \nDuring:\n
 \nΚατα τη διάρκεια:\n
@@ -206,7 +206,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Η διαδικασία αντιγραφής τέλειωσε.\nΚλικ στο Έξοδος για να εγκαταλείψετε το WinHTTrack.\nΔείτε το αρχείο γεγονότων αν είναι απαραίτητο, έτσι ώστε να επιβεβαιώσετε ότι όλα είναι εντάξει.\n\nΣας ευχαριστώ για την χρήση του WinHTTrack!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * Η ΑΝΤΙΓΡΑΦΗ ΕΓΚΑΤΑΛΕΙΦΘΗΚΕ! * *\r\nΗ παρούσα προσωρινή cache είναι απαραίτητη για κάθε λειτουργία ανανέωσης και περιλαμβάνει μόνο δεδομένα που κατέβηκαν κατά τη διάρκεια της τωρινής εγκαταλελειμένης περιόδου.\r\nΗ προηγούμενη cache ίσως περιέχει πιο ολοκληρωμένες πληροφορίες. Αν δεν θέλετε να χάσετε αυτές τις πληροφορίες, πρέπει να να τις ανακτήσετε και να διαγράψετε την παρούσα cache.\r\n[Σημείωση: Αυτό μπορεί να γίνει εύκολα σβήνοντας τα αρχεία hts-cache/new.*]\r\n\r\nΝομίζετε πως η προηγούμενη cache ίσως περιέχει πιο ολοκληρωμένες πληροφορίες και θέλετε να την ανακτήσετε;
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * ΣΦΑΛΜΑ ΑΝΤΙΓΡΑΦΗΣ * *\r\nΤο WinHTTrack ανακάλυψε πως το παρόν αντίγραφο είναι άδειο. Αν ήταν μια ανανέωση, το προηγούμενο αντίγραφο ανακτήθηκε.\r\nΛόγος: Οι πρώτη(ες) σελίδα(ες) είτε δεν βρέθηκαν ή υπήρξε πρόβλημα κατά την σύνδεση.\r\n=> Επιβεβαιώστε ότι η τοποθεσία υπάρχει ακόμα και/ή ελέγξτε τις ρυθμίσεις του proxy σας! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \n\nΣυμβουλή: Κλικ στο [Προβολή αρχείο γεγονότων] για να δείτε μηνύματα προειδοποιήσεων ή λαθών
@@ -928,5 +928,5 @@ You can now close this window
 Τώρα μπορείτε να κλείσετε αυτό το παράθυρο
 Server terminated
 Ακυρώθηκε από τον εξυπηρετητή
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 Ένα καταστροφικό σφάλμα προκλήθηκε κατά την αντιγραφή αυτού του τόπου

lang/Italiano.txt

@@ -41,7 +41,7 @@ Eliminare il progetto vuoto %s?
 Action not yet implemented
 Azione non ancora possibile
 Error deleting this project
-C'é stato un errore durante l'eliminazione di questo progetto
+C'è stato un errore durante l'eliminazione di questo progetto
 Select a rule for the filter
 Seleziona le regole per il filtro
 Enter keywords for the filter
@@ -81,7 +81,7 @@ Esempio:
 gif\r\nWill match all GIF files
 gif\r\nTroverà tutti i file gif
 blue\r\nWill find all files with a matching 'blue' sub-string such as 'bluesky-small.jpeg'
-blue\r\nTroverà tutti i file contenenti blue, es. 'bluesky-small.jpeg'
+blue\r\nTroverà tutti i file contenenti 'blue', es. 'bluesky-small.jpeg'
 bigfile.mov\r\nWill match the file 'bigfile.mov', but not 'bigfile2.mov'
 bigfile.mov\r\nTroverà il file 'bigfile.mov', ma non 'bigfile2.mov'
 cgi\r\nWill find links with folder name matching sub-string 'cgi' such as /cgi-bin/somecgi.cgi
@@ -97,7 +97,7 @@ www.someweb.com\r\nTrover
 someweb\r\nWill find any links with matching sub-string such as www.someweb.com/.., www.test.abc/fromsomeweb/index.html, www.test.abc/test/someweb.html etc.
 someweb\r\nTroverà tutti i collegamenti come www.someweb.com/.., www.test.abc/fromsomeweb/index.html, www.test.abc/test/someweb.html etc.
 www.test.com/test/someweb.html\r\nWill only find the 'www.test.com/test/someweb.html' file. Note that you have to type the complete path (URL + site path)
-www.test.com/test/someweb.html\r\nTroverà soltanto il collegamenti www.test.com/test/someweb.html. Notate che bisogna inserire sia l'indirizo (www.xxx.yyy), che il percorso (/test/someweb.html)
+www.test.com/test/someweb.html\r\nTroverà soltanto il collegamenti www.test.com/test/someweb.html. Nota che bisogna inserire sia l'indirizo (www.xxx.yyy), che il percorso (/test/someweb.html)
 All links will match
 Tutti i collegamenti verranno rifiutati/accettati
 Add exclusion filter
@@ -121,7 +121,7 @@ Clicca per uscire da WinHTTrack Website Copier
 View log files
 Visualizza i file di log
 Browse HTML start page
-Visualizza la pagina html iniziale
+Visualizza la pagina HTML iniziale
 End of mirror
 Fine del mirror
 View log files
@@ -169,15 +169,15 @@ pronto
 error
 errore
 Receiving files..
-Ricezione dei file
+Ricezione dei file..
 Parsing HTML file..
 Analisi file html..
 Purging files..
-Pulizia file
+Pulizia file..
 Loading cache in progress..
 Caricamento della cache in corso...
 Parsing HTML file (testing links)..
-Analisi file HTML (test dei collegamenti)
+Analisi file HTML (test dei collegamenti)..
 Pause - Toggle [Mirror]/[Pause download] to resume operation
 Pausa (seleziona [Aiuto]/[Pausa] per continuare)
 Finishing pending transfers - Select [Cancel] to stop now!
@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 Mirror in corso [%s, %s bytes]
 Site mirroring finished!
 Mirror del sito completato!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 C'è stato un problema durante il mirror\n
 \nDuring:\n
 Durante:\n
@@ -204,8 +204,8 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Il mirror è finito.\nClicca OK per uscire da WinHTTrack.\nGuarda i file log per assicurarti che tutto è andato a buon fine.\n\nGrazie per aver usato WinHTTrack!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * MIRROR INTERROTTO! * *\r\nLa cache corrente è necessaria per le operazioni di aggiornamento e contiene solo i dati scaricati durante questa sessione interrotta.\r\nLa cache precedente potrebbe contenere informazioni più complete; se non vuoi perdere quelle informazioni, devi ripristinarla e cancellare la cache corrente.\r\n[Nota: per fare questo, cancella il contenuto della cartella hts-cache del mirror]\r\n\r\nPensi che la cache precedente possa contenere informazioni più complete e vuoi ripristinarla?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
-* * ERRORE NEL MIRROR! * *\r\nHTTrack ha stabilito che il mirror attuale è vuoto. Se questo è un'aggiornamento, il mirror precedente è stato ripristinato.\r\nMotivo: la prima pagina(e) non è stata trovata oppure c'è stato un problema durante la connessione\r\n=> Assicuratevi che il sito esista ancora, e/o verificate le vostre impostazioni del proxy! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * ERRORE NEL MIRROR! * *\r\nHTTrack ha stabilito che il mirror attuale è vuoto. Se questo è un aggiornamento, il mirror precedente è stato ripristinato.\r\nMotivo: la prima pagina(e) non è stata trovata oppure c'è stato un problema durante la connessione\r\n=> Assicurati che il sito esista ancora, e/o verificate le vostre impostazioni del proxy! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \nSuggerimento: Clicca [Visualizza filr di log] per vedere i messaggi di avvertimento o di errore
 Error deleting a hts-cache/new.* file, please do it manually
@@ -374,10 +374,10 @@ Create error logging and report files
 Crea file di log per segnalare errori e informazioni
 Generate DOS 8-3 filenames ONLY
 Genera solo nomi di file in formato 8.3
-Generate ISO9660 filenames ONLY for CDROM medias
+Generate ISO 9660 filenames ONLY for CDROM medias
 Genera nomi di file in formato ISO9660 per i CDROM
 Do not create HTML error pages
-Non generare pagine d'errore html
+Non generare pagine d'errore HTML
 Select file types to be saved to disk
 Seleziona i tipi di file da scrivere sul disco
 Select parsing direction
@@ -399,7 +399,7 @@ Annulla tutti i collegamenti dal host se
 Maximum number of retries on non-fatal errors
 Massimo numero di tentativi nel caso di un errore non fatale
 Maximum size for any single HTML file
-Massima dimensione per una pagina html
+Massima dimensione per una pagina HTML
 Maximum size for any single non-HTML file
 La dimensione massima per un file
 Maximum amount of bytes to retrieve from the Web
@@ -417,7 +417,7 @@ Massimo numero di link che possono essere testati (non salvati!)
 Browser identity
 Identità del browser
 Comment to be placed in each HTML file
-Pié di pagina per ogni file HTML
+Piè di pagina per ogni file HTML
 Back to starting page
 Torna alla pagina iniziale
 Save current preferences as default values
@@ -455,13 +455,13 @@ Usa richieste HTTP/1.0, limita le capacit
 Attempt to limit retransfers through several tricks (file size test..)
 Tentativo di limitare il numero di ripetizioni dei trasferimenti, usando alcuni truchi (test della dimensione del file..)
 Attempt to limit the number of links by skipping similar URLs (www.foo.com==foo.com, http=https ..)
-
+Tentativo di limitare il numero di link, saltando URL simili (www.foo.com==foo.com, http=https ..)
 Write external links without login/password
 Salva link esterni senza login e password
 Write internal links without query string
 Salva i link interni senza stringa query
 Get non-HTML files related to a link, eg external .ZIP or pictures
-Scarica file non-html vicino ai collegamenti (es. .ZIP o immagini presenti all'esterno)
+Scarica file non-HTML vicino ai collegamenti (es. .ZIP o immagini presenti all'esterno)
 Test all links (even forbidden ones)
 Verifica tutti i collegamenti (anche quelli vietati)
 Try to catch all URLs (even in unknown tags/code)
@@ -483,7 +483,7 @@ File di log
 DOS names (8+3)
 Nomi DOS (8+3)
 ISO9660 names (CDROM)
-Nomi ISO9660 (CDROM)
+Nomi ISO 9660 (CDROM)
 No error pages
 Senza pagine d'errore
 Primary Scan Rule
@@ -505,7 +505,7 @@ Limiti
 Identity
 Identità
 HTML footer
-Pié di pagina HTML
+Piè di pagina HTML
 N# connections
 N° di connessioni
 Abandon host if error
@@ -521,7 +521,7 @@ Usa proxy per trasferimenti ftp
 TimeOut(s)
 TimeOut
 Persistent connections (Keep-Alive)
-Connessioni persistenti (Keep-alive)
+Connessioni persistenti (keep-alive)
 Reduce connection time and type lookup time using persistent connections
 Riduci tempo di connessione e il tempo di verifica del tipo usando la connessione persistente
 Retries
@@ -597,7 +597,7 @@ Tipi MIME
 Do you really want to quit WinHTTrack Website Copier?
 Vuoi veramente uscire da WinHTTrack?
 Do not connect to a provider (already connected)
-non effettuare la connessione al provider (già connesso)
+Non effettuare la connessione al provider (già connesso)
 Do not use remote access connection
 Non usare la connessione di accesso remoto
 Schedule the mirroring operation
@@ -633,7 +633,7 @@ Connessione a questo provider:
 Disconnect when finished
 Disconnetti alla fine
 Disconnect modem on completion
-Disconnetti il modem quando il mirror é finito
+Disconnetti il modem quando il mirror è finito
 \r\n(Please notify us of any bug or problem)\r\n\r\nDevelopment:\r\nInterface (Windows): Xavier Roche\r\nSpider: Xavier Roche\r\nJavaParserClasses: Yann Philippot\r\n\r\n(C)1998-2003 Xavier Roche and other contributors\r\nMANY THANKS for translation tips to:\r\nRobert Lagadec (rlagadec@yahoo.fr)
 \r\n(informateci degli errori o problemi)\r\n\rSviluppo:\r\nInterfacccia: Xavier Roche\r\nSpider: Xavier Roche\r\nJavaParserClasses: Yann Philippot\r\n\r\n(C)1998-2003 Xavier Roche and other contributors\r\nMANY THANKS for Italian translations to:\r\nWitold Krakowski (wkrakowski@libero.it)
 About WinHTTrack Website Copier
@@ -645,7 +645,7 @@ La domanda del wizard
 Your answer:
 La vostra risposta:
 Link detected..
-É stato trovato un collegamento
+È stato trovato un collegamento
 Choose a rule
 Scegli una regola
 Ignore this link
@@ -721,17 +721,17 @@ Salva le opzioni di default
 Reset to default options
 Azzera le opzioni di default
 Load options...
-Carica le opzioni
+Carica le opzioni...
 Save options as...
 Salva le opzioni come...
 Language preference...
-Preferenza di lingua
+Preferenza di lingua...
 Contents...
-Indice
+Indice...
 About WinHTTrack...
-Informazioni su WinHTTrack Website Copier
+Informazioni su WinHTTrack...
 New project\tCtrl+N
-Nuovo progetto / importa...
+Nuovo progetto\tCtrl+N
 &Open...\tCtrl+O
 &Apri...\tCtrl+O
 &Save\tCtrl+S
@@ -751,7 +751,7 @@ Esempio:\t%h%p/%n.%t\n->\t\tc:\\mirror\\www.someweb.com\\someimages\\image.gif
 Proxy settings
 Preferenze del proxy
 Proxy address:
-L'Indirizzo del proxy
+Indirizzo del proxy
 Proxy port:
 Port del proxy
 Authentication (only if needed)
@@ -777,9 +777,9 @@ Seleziona da qui un progetto esistente da aggiornare
 Click here to select path
 Clicca qui per selezionare il percorso
 Select or create a new category name, to sort your mirrors in categories
-
+Seleziona o crea una nuova categoria
 HTTrack Project Wizard...
-Wizard per progetto HTTrack
+Wizard per progetto HTTrack...
 New project name:
 Il nome del nuovo progetto:
 Existing project name:
@@ -789,7 +789,7 @@ Il nome del progetto:
 Base path:
 Il percorso base:
 Project category:
-
+Categoria del progetto:
 C:\\My Web Sites
 C:\\Mie pagine Web
 Type a new project name, \r\nor select existing project to update/resume
@@ -837,7 +837,7 @@ Impossibile trovare i file di aiuto
 Unable to save parameters!
 Impossibile salvare i parametri!
 Please drag only one folder at a time
-Trascina solo una cartella
+Trascina solo una cartella alla volta
 Please drag only folders, not files
 Trascina solo una cartella, non un file
 Please drag folders only
@@ -851,7 +851,7 @@ Vuoi veramente selezionare la struttura definita dall'utente?
 Too manu URLs, cannot handle so many links!!
 Troppi URL, il programma non può servire così tanti collegamenti!
 Not enough memory, fatal internal error..
-Troppa poca memoria, grave errore interno...
+Troppa poca memoria, errore interno fatale...
 Unknown operation!
 Operazione sconosciuta!
 Add this URL?\r\n
@@ -879,7 +879,7 @@ Congela la finestra
 More information:
 Più informazioni:
 Welcome to WinHTTrack Website Copier!\n\nPlease click on the NEXT button to\n\n- start a new project\n- or resume a partial download
-Benvenuti nel WinHTTrack Website Copier\n\nClicca sul pulsante NEXT per iniziare o continuare un progetto
+Benvenuti nel WinHTTrack Website Copier!\n\nClicca sul pulsante NEXT per iniziare o continuare un progetto
 File names with extension:\nFile names containing:\nThis file name:\nFolder names containing:\nThis folder name:\nLinks on this domain:\nLinks on domains containing:\nLinks from this host:\nLinks containing:\nThis link:\nALL LINKS
 Tipi di file con l'estensione:\nNomi di file contenenti:\nQuesto nome di file:\nNomi di cartella contenenti:\nQuesto nome cartella:\nCollegamenti in questo dominio:\nCollegamenti nei domini contenenti:\nCollegamenti da questo host:\nCollegamenti contenenti:\nQuesto collegamento:\nTUTTI I COLLEGAMENTI
 Show all\nHide debug\nHide infos\nHide debug and infos
@@ -887,7 +887,7 @@ Mostra tutto\nNascondi il debug\nNascondi le informazioni\nNascondi il debug e l
 Site-structure (default)\nHtml in web/,       images/other files in web/images/\nHtml in web/html,   images/other in web/images\nHtml in web/,       images/other in web/\nHtml in web/,       images/other in web/xxx, where xxx is the file extension\nHtml in web/html,   images/other in web/xxx\nSite-structure, without www.domain.xxx/\nHtml in site_name/, images/other files in site_name/images/\nHtml in site_name/html, images/other in site_name/images\nHtml in site_name/, images/other in site_name/\nHtml in site_name/, images/other in site_name/xxx\nHtml in site_name/html, images/other in site_name/xxx\nAll files in web/, with random names (gadget !)\nAll files in site_name/, with random names (gadget !)\nUser-defined structure..
 Struttura del sito (default)\nHtml nel web,      immagini/altri file nel web/immagini/\nHtml nel web/html,  immagini/altro nel web/immagini\nHtml nel web/,        immagini/altro nel web/\nHtml nel web/,        immagini/altro nel web/xxx, dove xxx è l'estensione del file\nHtml nel web/html,   immagini/altro nel web/xxx\nStruttura del sito, senza www.dominio.xxx/\nHtml nel nome_del_sito/,immagini/altri file nel nome_del_sito/immagini/\nHtml nel nome_del_sito/html,immagini/altro nel nome_del file/immagini\nHtml nel nome_del_sito/,immagini/altro nel nome_del_sito/\nHtml nel nome_del_sito/,immagini/altro nel nome_del_sito/xxx\nHtml nel nome_del_sito/html,immagini/altro nel nome_del_sito/xxx\nTutti i file nel web/,con nomi casuali\nTutti i file nel nome_del_sito/,con nomi casuali\nStruttura definita dall'utente..
 Just scan\nStore html files\nStore non html files\nStore all files (default)\nStore html files first
-Soltanto scanning\nSalva file html\nSalva file non-html\nSalva tutti i file (default)\nSalva prima i file html
+Soltanto scanning\nSalva file html\nSalva file non-html\nSalva tutti i file (default)\nSalva prima i file HTML
 Stay in the same directory\nCan go down (default)\nCan go up\nCan both go up & down
 Non uscire dalla directory\nPuoi andare giù nella struttura (default)\nPuoi salire\nPuoi sia scendere che salire
 Stay on the same address (default)\nStay on the same domain\nStay on the same top level domain\nGo everywhere on the web
@@ -901,7 +901,7 @@ normale\navanzato\ndebug
 Download web site(s)\nDownload web site(s) + questions\nGet individual files\nDownload all sites in pages (multiple mirror)\nTest links in pages (bookmark test)\n* Continue interrupted download\n* Update existing download
 Scarica il sito(i) web\nScarica il sito(i) (con richieste)\nScarica file separati\nScarica tutti i siti nelle pagine (mirror multiplo)\nVerifica i collegamenti nelle pagine (test dei bookmark)\n* Continua un download interrotto\n* Aggiorna un download esistente
 Relative URI / Absolute URL (default)\nAbsolute URL / Absolute URL\nAbsolute URI / Absolute URL\nOriginal URL / Original URL
-URL Relativo / URL Assoluto (default)\nURL Assoluto / URL Assoluto\nURL Assoluto 7 URL Assoluto\nURL Originale / URL Originale
+URL Relativo / URL Assoluto (default)\nURL Assoluto / URL Assoluto\nURL Assoluto / URL Assoluto\nURL Originale / URL Originale
 Open Source offline browser
 Browser offline open source
 Website Copier/Offline Browser. Copy remote websites to your computer. Free.
@@ -926,5 +926,5 @@ You can now close this window
 Puoi chiudere questa finestra adesso
 Server terminated
 Server disconnesso
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 Si è verificato un errore fatale durante la copia

lang/Japanese.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 サイトのコピー（ミラー）進行中 [%s, %s bytes]
 Site mirroring finished!
 サイトのコピー（ミラー）完了
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 コピー（ミラー）の際、問題が発生しました\n
 \nDuring:\n
 \r\n\n発生した箇所:\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 コピー（ミラー）は完了しました。\n「終了」で WinHTTrackを終了します。\n必要なら全てがOKであることを確認するためにログファイルをご覧になってください。\n WinHTTrack をご利用いただきありがとうございました!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * コピー（ミラー）が中断されました! * *\r\n現在の一時的キャッシュはあらゆる更新作業に必要で、また現在の中断されたセッションにおけるデータしか持っていません。\r\n以前のキャッシュはもっと完全な情報を持っているかもしれません。; もし、その情報を失いたくない場合は、それを復元（リストア）して現在のキャッシュを削除する必要があります。\r\n[メモ: これは hts-cache/new.* であらわされるファイルを削除することで簡単に行うことができます]\r\n\r\n以前のキャッシュがより多い情報を持っていたと考えますか?そしてそれを復元したいと思いますか?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * コピー（ミラー）のエラー! * *\r\nHTTrackは現在のコピー（ミラー）が空であると感知しました。もしこれが更新であるなら、以前のコピー（ミラー）が復元されます。\r\n原因:最初のページが見つからない、または接続に問題が発生しました。\r\n=> Webサイトがまだ存在すること、またはプロキシの設定を確認してください。<=
 \n\nTip: Click [View log file] to see warning or error messages
 \r\n\n\nTipp: [ログを見る] をクリックすると警告とエラーを見ることができます。
@@ -926,5 +926,5 @@ You can now close this window
 
 Server terminated
 
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 

lang/Macedonian.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 Âî òåê å êîïèðàœå íà ñà¼òîò [%s, %s áà¼òè]
 Site mirroring finished!
 Êîïèðàœåòî íà ñà¼òîò å çàâðøåíî!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Ñå ïî¼àâè ïðîáëåì ïðè êîïèðàœåòî íà ñà¼òîò\n
 \nDuring:\n
 \nÂî òåê:\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Êîïèðàœåòî íà ñà¼òîò çàâðøè.\nÊëèêíè Èçëåç çà èñêëó÷óâàœå íà WinHTTrack.\nÂèäè ãè log äàòîòåêèòå çà äà ïðîâåðèø äàëè ñå å â ðåä.\n\nÁëàãîäàðèìå çà êîðèñòåœåòî íà WinHTTrack!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 ** ÊÎÏÈÐÀŒÅÒÎ Å ÏÐÅÊÈÍÀÒÎ!**\r\nÑåãàøíèîò temporary êåø å ïîòðåáåí çà ñåêî¼à update îïåðàöè¼à è ãè ñîäðæè ñàìî ïîäàòîöèòå ñèìíàòè ïðè ñåãàøíàòà ïðåêèíàòà ñåñè¼à.\r\nÁèâøèîò êåø ìîæå äà ñîäðæè êîìïëåòíè èíôîðìàöèè; àêî íå ñàêàòå äà ãè çèãóáèòå òèå èíôîðìàöèè, ìîðàòå äà ãè ïîâðàòèòå è äà ãî èçáðèøåòå ñåãàøíèîò êåø\r\n[Ñîâåò: Îâà ìîæå ëåñíî äà ñå íàïðàâè îâäå ïðåêó áðèøåœå íà hts-cache/new.* äàòîòåêèòå]\r\n\r\nÌèñëèòå ëè äåêà áèâøèîò êåø ìîæå äà ñîäðæè êîìïëåòíè èíôîðìàöèè, è äàëè ñàêàòå äà ãè ïîâðàòèòå?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 **ÃÐÅØÊÀ ÏÐÈ ÊÎÏÈÐÀŒÅÒÎ**\r\nHTTrack îòêðè äåêà ñåãàøíèîò êåø å ïðàçåí. Àêî áèë update, ïðåòõîäíàòà êîïè¼à å ïîâðàòåíà.\r\nÏðè÷èíà: ïðâèòå ñòðàíèöè èëè íå ìîæàò äà áèäàò ïðîíà¼äåíè, èëè ñå ñëó÷è¼ ïðîáëåì ñî êîíåêöè¼àòà.\r\n=> Îñèãóðåòå ñå äàëè âåá ñà¼òîò ñåóøòå ïîñòîè, è/èëè ïðîâåðåòå ãè âàøèòå proxy ñåòèíçè!<=
 \n\nTip: Click [View log file] to see warning or error messages
 n\nÑîâåò: Êëèêíè [Âèäè ¼à log äàòîòåêàòà] çà äà âèäèòå ïîðàêè çà ãðåøêè èëè ïðåäóïðåäóâàœå
@@ -926,5 +926,5 @@ You can now close this window
 Ìîæåòå äà ãî çàòâîðèòå îâî¼ ïðîçîðåö
 Server terminated
 Ñåðâåðîò å ïðåêèíàò
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 Íàñòàíà ôàòàëíà ãðåøêà ïðè îâî¼ mirror

lang/Magyar.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 A tükrözés folyamatban [%s, %s bájt]
 Site mirroring finished!
 A webhely tükrözése befejezõdött
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 A tükrözés közben hiba történt\n
 \nDuring:\n
 \nKözben:\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 A tükrözés befejezõdött.\nKattintson az OK gombra a WinHTTrack bezárásához.\nNézze meg a naplófájl(oka)t, ha szükséges, hogy meggyõzõdjön róla, minden rendben van-e.\n\nKöszönet a WinHTTrack használatáért!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * TÜKRÖZÉS MEGSZAKÍTVA! * *\r\nA frissítéshez az aktuális ideiglenes gyorsítótárra van szükség, és csak az imént megszakított mûvelettel letöltött adatokat tartalmazza.\r\nA régi gyorsítótár bizonyára több információt tartalmaz; ha nem akarja elveszíteni azt az információt, vissza kell állítania és törölnie a jelenlegi gyorsítótárat.\r\n[Megjegyzés: Ez könnyen elvégezhetõ itt a hts-cache/new fájlok* törlésével.]\r\n\r\nÚgy gondolja, hogy a régi gyorsítótár teljesebb információt tartalmazhat, és vissza kívánja állítani?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * TÜKRÖZÉSI HIBA! * *\r\nA HTTrack felismerte, hogy az aktuális tükrözés üres. Ha frissítés volt, vissza lett állítva az elõzõ tükrözés.\r\nOk: az elsõ oldal(ak) vagy nem találhatók, vagy csatlakozási probléma lépett föl.\r\n=> Nézze meg, hogy a webhely létezik-e még, és/vagy ellenõrizze a proxy beállításokat! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \nTipp: Kattintson a [Naplófájl megjelenítése] menüpontra a figyelmeztetések vagy hibaüzenetek megtekintéséhez
@@ -926,5 +926,5 @@ You can now close this window
 Mostmár bezárhatja ezt az ablakot
 Server terminated
 A kiszolgáló befejezte a kapcsolatot
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 Végzetes hiba történt a tükrözés közben

lang/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.16.5 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2021 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,23 +15,61 @@
 @SET_MAKE@
 
 VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
     esac; \
-    test $$am__dry = yes; \
-  }
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,19 +89,31 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = lang
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
 	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
 	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/snprintf.m4 \
-	$(top_srcdir)/configure.ac
+	$(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
 am__can_run_installinfo = \
@@ -101,10 +150,13 @@ am__uninstall_files_from_dir = { \
   }
 am__installdirs = "$(DESTDIR)$(langdir)" "$(DESTDIR)$(langrootdir)"
 DATA = $(lang_DATA) $(langroot_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
 AM_CFLAGS = @AM_CFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
@@ -113,9 +165,11 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
+CFLAGS_PIE = @CFLAGS_PIE@
 CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
+CSCOPE = @CSCOPE@
+CTAGS = @CTAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFAULT_CFLAGS = @DEFAULT_CFLAGS@
 DEFAULT_LDFLAGS = @DEFAULT_LDFLAGS@
@@ -129,8 +183,10 @@ ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
+ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
+FILECMD = @FILECMD@
 GREP = @GREP@
 HAVE_VISIBILITY = @HAVE_VISIBILITY@
 HTTPS_SUPPORT = @HTTPS_SUPPORT@
@@ -142,6 +198,7 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
+LDFLAGS_PIE = @LDFLAGS_PIE@
 LFS_FLAG = @LFS_FLAG@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
@@ -150,6 +207,7 @@ LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_CV_OBJDIR = @LT_CV_OBJDIR@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -226,6 +284,7 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
+runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
@@ -254,14 +313,13 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lang/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu lang/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
 	esac;
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -320,14 +378,16 @@ uninstall-langrootDATA:
 	@list='$(langroot_DATA)'; test -n "$(langrootdir)" || list=; \
 	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 	dir='$(DESTDIR)$(langrootdir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
+tags TAGS:
 
-ctags: CTAGS
-CTAGS:
+ctags CTAGS:
 
+cscope cscopelist:
 
-distdir: $(DISTFILES)
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -463,17 +523,19 @@ uninstall-am: uninstall-langDATA uninstall-langrootDATA
 .MAKE: install-am install-strip
 
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-langDATA \
+	cscopelist-am ctags-am distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-langDATA \
 	install-langrootDATA install-man install-pdf install-pdf-am \
 	install-ps install-ps-am install-strip installcheck \
 	installcheck-am installdirs maintainer-clean \
 	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
-	uninstall-langDATA uninstall-langrootDATA
+	mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
+	uninstall-am uninstall-langDATA uninstall-langrootDATA
+
+.PRECIOUS: Makefile
 
 
 #dist-hook:

lang/Nederlands.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 Spiegeling is bezig... [%s, %s bytes]
 Site mirroring finished!
 Spiegeling beëindigd!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Een probleem is opgetreden tijdens de spiegeling\n
 \nDuring:\n
 \r\n\nTijdens:\n\r\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 De spiegeling is uitgevoerd.\nKlik OK om WinHTTrack te beëindigen.\nIndien nodig, zie protocolbestand(en) om zeker te gaan dat alles OK is\n\nAlvast bedankt voor het gebruik van WinHTTrack!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * SPIEGELING AFGEBROKEN! * *\r\nDe aktuele tijdelijke cache is noodzakelijk voor gelijkwelke update operatie en bevat enkel data gedownload gedurende de zoeven afgebroken sessie.\r\nDe eerste cache kan juistere informaties bevatten; indien je deze informatie niet wenst te verliezen, dan moet je deze restoren and de aktuele cache wissen.\r\n[Opmerking: Dit is het eenvoudigst door het wissen van de hts-cache/new.* bestanden]\r\n\r\nDenk je dat de eerste cache juistere informaties bevat, en wil je deze restoren?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * FOUT MET DE SPIEGELING * *\r\nHTTrack heeft vastgesteld dat de aktuele spiegeling leeg is. Indien het een update was, is de vorige copie terug actueel.\r\nReden: de eerste pagina(s) konden ofwel niet gevonden worden, of er was een probleem met de connectie.\r\n=> Verzeker je ervan, dat de website nog steeds bestaat en/of je proxy settings correct zijn! <=
 \n\nTip: Click [View log file] to see warning or error messages
 :\r\n\n\nTip: Klik [Toon protocolbestand] voor de fouten en mededelingen\r\n
@@ -926,5 +926,5 @@ You can now close this window
 Je kunt dit verster nu sluiten
 Server terminated
 Server beeindigd
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 Een fatale fout is opgetreden tijdens deze spiegeling

lang/Norsk.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 Kopiering pågår [%s, %s bytes]
 Site mirroring finished!
 Kopieringen er fullført!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Et problem oppsto under kopieringen\n
 \nDuring:\n
 \nUnder:\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Kopieringen er fullført.\nKlikk AVSLUTT for å avslutte WinHTTrack.\nVis loggfil(er) vis det er nødvendig, for å sjekke at alt er OK.\n\nTakk for at du brukte WinHTTrack!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * KOPIERINGEN ER AVBRUTT! * *\r\nDen nåværende midlertidige cachen er obligatorisk for alle oppdateringsoperasjoner, og inneholder bare data fra den siste avbrutte kopieringsprosessen.\r\nDen tidligere cachen kan inneholde fyldigere informasjon; hvis du ønsker å beholde den informasjonen må du gjenopprette den og slette den aktuelle cachen.\r\n[OBS: Dette kan lettest gjøres ved å slette alle 'hts-cache/new.*'-filer]\r\n\r\nTror du den tidligere cache-filen kanskje inneholder fyldigere informasjon, og vil du gjenopprette den?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * KOPIERINGSFEIL! * *\r\nHttrack har oppdaget at den gjeldende websiden er tom. Hvis du var i gang med å oppdatere enn kopi, vil det gamle innholdet bli gjenopprettet.\r\nMulig årsak: Den første siden kunne enten ikke finnes, eller det oppstod et problem med forbindelsen.\r\n=> Kontroller at websiden fremdeles finnes, og/eller sjekk proxy-innstillingene dine! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \n\nTips: Klikk på [Vis loggfil] for å se advarsler og feilmeldinger
@@ -926,5 +926,5 @@ You can now close this window
 
 Server terminated
 
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 

lang/Polski.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 Tworzenie lustra w toku (%s, %s bajtów)
 Site mirroring finished!
 Zakoñczono tworzenie lustra (mirroru)
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Poajwi³ siê problem podczas tworzenia lustra\r\n
 \nDuring:\n
 Podczas:\r\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Zakoñczono tworzenie lustra.\r\nKliknij OK aby wyjœæ z WinHTTrack.\r\nSprawdŸ logi, upewnij siê, czy wszystko przebieg³o dobrze.\r\nDziêkujemy za u¿ywanie HTTrack !
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * TWORZENIE LUSTRA PRZERWANE! * *\r\nObecnie wykorzystywany cache, wymagany dla jakichkolwiek operacji uaktualniaj¹cych zawiera jedynie dane z obecnej przerwanej sesji.\r\nPoprzedni cache mo¿e zawieraæ bardziej kompletne dane; jeœli nie chcesz ich straciæ, przywróæ je i usuñ obecny cache.\r\n[Uwaga: Mo¿esz to ³atwo zrobiæ tutaj poprzez skasowanie htscache/new.* pliki]\r\nCzy uwa¿asz, ¿e poprzedni cache mo¿e zawieraæ bardziej kompletne informacje i czy przywróciæ go ?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * B£¡D LUSTRA! * *\r\nHTtrack stwierdza ze obecne lustro jest puste. Je¶li by³o to uaktualnienie, to przywrócono poprzedni± wersjê lustra. Powód: Nie mo¿na by³o odczytaæ pierwszych stron lub wyst±pi³ b³±d po³±czenia.\r\n=> Upewnij siê czy strona ci±gle istnieje, lub te¿ sprawd¼ ustawienia proxy! <=
 \n\nTip: Click [View log file] to see warning or error messages
 Tip: Kliknij (Poka¿ logi) aby zobaczyæ informacje o b³êdach i ostrze¿eniach
@@ -926,5 +926,5 @@ You can now close this window
 Mozesz teraz zamknac to okno.
 Server terminated
 Serwer zakonczyl prace
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 Podczas tworzenia lustra wydarzyl sie fatalny blad.

lang/Portugues-Brasil.txt

@@ -147,9 +147,9 @@ Localizar
 Find a word
 Localizar uma palavra
 Info log file
-Informações do relatório
+Arquivo de registro de informações
 Warning/Errors log file
-Atenção/Erros de relatório
+Aviso/Arquivo de registro de erros
 Unable to initialize the OLE system
 Não foi possível iniciar o sistema OLE
 WinHTTrack could not find any interrupted download file cache in the specified folder!
@@ -171,7 +171,7 @@ erro
 Receiving files..
 Recebendo arquivos...
 Parsing HTML file..
-Analizando arquivo HTML...
+Analisando arquivo HTML...
 Purging files..
 Limpando arquivos...
 Loading cache in progress..
@@ -183,9 +183,9 @@ Pausa - Escolher [C
 Finishing pending transfers - Select [Cancel] to stop now!
 Finalizando transferências pendentes - Selecione [Cancelar] para parar agora!
 scanning
-analizando
+analisando
 Waiting for scheduled time..
-Aguardando horário programado para iniciar...
+Aguardando horário agendado...
 Transferring data..
 Transferindo dados..
 Connecting to provider
@@ -196,7 +196,7 @@ Site mirroring in progress [%s, %s bytes]
 Processo de recebimento [%s, %s bytes]
 Site mirroring finished!
 Cópia do site finalizada!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Ocorreu um problema durante a operação de recebimento\n
 \nDuring:\n
 Durante:\n
@@ -206,7 +206,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Cópia finalizada.\nClique OK para sair.\nVeja o relatório para verificar se está tudo OK.\n\nObrigado por utilizar o WinHTTrack!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * CÓPIA INTERROMPIDA! * *\r\nO cache temporário atual é necessário para qualquer operação de atualização e somente contém dados carregados durante a presente sessão.\r\nÉ possível que o cache anterior contenha dados mais completas; se você não quiser perder esses dados, você deve restaurá-lo e excluir o cache atual.\r\n[Nota: Esta operação pode ser facilmente executada aqui excluindo os arquivos hts-cache/novo.*]\r\n\r\nVocê acredita que o cache anterior pode conter informações mais completas, e você deseja restaurá-lo?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * ERRO DE CÓPIA! * *\r\nO HTTrack detectou que a cópia atual está vazia. Se ela fosse uma atualização, a cópia anterior teria sido restaurada.\r\nCausa: a primeira página não foi encontrada, ou um problema de conexão ocorreu.\r\n=> Assegure-se de que o website existe, e/ou verifique suas configurações proxy! <=
 \n\nTip: Click [View log file] to see warning or error messages
 Dica: Clique [Ver relatório] para visualizar avisos e as mensagens de erro
@@ -372,6 +372,8 @@ Create a Start Page
 Criar uma página inicial
 Create a word database of all html pages
 Criar uma base de dados da palavra de todas páginas HTML
+Build a complete RFC822 mail (MHT/EML) archive of the mirror
+Criar arquivo de e-mail RFC822 completo (MHT/EML) do espelho
 Create error logging and report files
 Criar relatórios de erros e informações
 Generate DOS 8-3 filenames ONLY
@@ -420,6 +422,12 @@ Browser identity
 Indentidade do navegador
 Comment to be placed in each HTML file
 Notas de rodapé em cada arquivo HTML
+Languages accepted by the browser
+Idiomas aceitos pelo navegador
+Additional HTTP headers to be sent in each requests
+Cabeçalhos HTTP adicionais para serem enviados em cada solicitação
+HTTP referer to be sent for initial URLs
+Referenciador HTTP a ser enviado para URLs iniciais
 Back to starting page
 Voltar à página inicial
 Save current preferences as default values
@@ -480,6 +488,8 @@ Make an index
 Criar um índice
 Make a word database
 Criar um banco de dados de palavras
+Build a mail archive
+Criar um arquivo de mensagens
 Log files
 Relatórios
 DOS names (8+3)
@@ -508,6 +518,12 @@ Identity
 Identificação
 HTML footer
 Rodapé do HTML
+Languages
+Idiomas
+Additional HTTP Headers
+Cabeçalhos HTTP adicionais
+Default referer URL
+URL de referência padrão
 N# connections
 Número de conexões
 Abandon host if error
@@ -889,7 +905,7 @@ Exibir tudo\nOcultar erros\nOcultar informa
 Site-structure (default)\nHtml in web/,       images/other files in web/images/\nHtml in web/html,   images/other in web/images\nHtml in web/,       images/other in web/\nHtml in web/,       images/other in web/xxx, where xxx is the file extension\nHtml in web/html,   images/other in web/xxx\nSite-structure, without www.domain.xxx/\nHtml in site_name/, images/other files in site_name/images/\nHtml in site_name/html, images/other in site_name/images\nHtml in site_name/, images/other in site_name/\nHtml in site_name/, images/other in site_name/xxx\nHtml in site_name/html, images/other in site_name/xxx\nAll files in web/, with random names (gadget !)\nAll files in site_name/, with random names (gadget !)\nUser-defined structure..
 Estrutura do site (padrão)\nHtml na web/,       imagens/outros arquivos na web/imagens/\nHtml na web/html,   imagens/outros na web/imagens\nHtml na web/,       imagens/outros na web/\nHtml na web/,       imagens/outros na web/xxx, quando xxx é a extensão do arquivo\nHtml na web/html,   imagens/outros na web/xxx\nEstrutura do site, sem www.dominio.xxx/\nHtml no nome_do_site/, imagens/outros no nome_do_site/imagens/\nHtml no nome_do_site/html, imagens/outros no nome_do_site/imagens\nHtml no nome_do_site/, imagens/outros no nome_do_site/\nHtml no nome_do_site/, imagens/outros no nome_do_site/xxx\nHtml no nome_do_site/html, imagens/outros no nome_do_site/xxx\nTodos os arquivos na web/, com nomes aleatórios (gadget !)\nTodos os arquivos no nome_do_site/, com nomes aleatórios (gadget !)\nEstrutura definida pelo usuário..
 Just scan\nStore html files\nStore non html files\nStore all files (default)\nStore html files first
-Somente analizar\nArmazenar arquivos html\nArmazenar arquivos não html\nAmazenar todos os arquivos (padrão)\nArmazenar arquivos html primeiro
+Somente analisar\nArmazenar arquivos html\nArmazenar arquivos não html\nAmazenar todos os arquivos (padrão)\nArmazenar arquivos html primeiro
 Stay in the same directory\nCan go down (default)\nCan go up\nCan both go up & down
 Permanecer no mesmo diretório\nPermite ir para abaixo (padrão)\nPermite ir para cima\nPermite ir para cima & para baixo
 Stay on the same address (default)\nStay on the same domain\nStay on the same top level domain\nGo everywhere on the web
@@ -925,8 +941,38 @@ Seu Navegador atualmente n
 Thank you
 Obrigado
 You can now close this window
-Vocë pode fechar esta janela agora
+Você pode fechar esta janela agora
 Server terminated
 Servidor finalizado
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 Um erro fatal ocorreu durante este espelho
+View Documentation
+Exibir documentação
+Go To HTTrack Website
+Ir Para o Site do HTTrack
+Go To HTTrack Forum
+Ir Para o Fórum do HTTrack
+View License
+Exibir Licença
+Beware: you local browser might be unable to browse files with embedded filenames
+Cuidado: seu navegador local pode não conseguir procurar arquivos com nomes de arquivos incorporados
+Recreated HTTrack internal cached resources
+Recursos em cache internos do HTTrack recriados
+Could not create internal cached resources
+Não foi possível criar recursos em cache internos
+Could not get the system external storage directory
+Não foi possível obter o diretório de armazenamento externo do sistema
+Could not write to:
+Não foi possível gravar em:
+Read-only media (SDCARD)
+Mídia somente leitura (SDCARD)
+No storage media (SDCARD)
+Nenhuma mídia de armazenamento (SDCARD)
+HTTrack may not be able to download websites until this problem is fixed
+O HTTrack pode não conseguir baixar sites até que esse problema seja corrigido
+HTTrack: mirror '%s' stopped!
+HTTrack: espelho '%s' interrompido!
+Click on this notification to restart the interrupted mirror
+Clique nesta notificação para reiniciar o espelho interrompido
+HTTrack: could not save profile for '%s'!
+HTTrack: não foi possível salvar o perfil para '%s'!

lang/Portugues.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 A copiar (%s, %s Bytes)
 Site mirroring finished!
 Cópia terminada
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Ocorreu um problema durante a cópia\n
 \nDuring:\n
 Durante:\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Cópia terminada.\nClique OK para sair.\nVeja o relatório para verificar se não há erros.\n\nObrigado por usar o WinHTTrack!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * CÓPIA INTERROMPIDA! * *\r\nA cache temporária actual é necessária para actualização e só contém os dados carregados durante a sessão em curso.\r\nÉ possível que a cache anterior contenha dados mais completos; para não perder esses dados, deve restaurá-la e apagar a cache actual.\r\n[Nota: Esta operação pode ser facilmente executada aqui apagando os ficheiros hts-cache/new.*]\r\n\r\nPensa que a cache anterior pode conter informações mais completas e quer restaurá-la?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * ERRO DE CÓPIA! * *\r\nHTTrack detectou que a cópia actual está vazia. Se fez uma actualização, a cópia anterior foi restaurada.\r\nRazão: a primeira página não foi encontrada ou ocorreu um problema na conexão.\r\n=> Certifique-se de que o site existe e confirme as configurações do proxy! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \nSugestão:Clique [Ver relatório] para ver os avisos e as mensagens de erro
@@ -926,5 +926,5 @@ You can now close this window
 
 Server terminated
 
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 

lang/Romanian.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 Clonare sit în desfăşurare [%s %s octeţi]
 Site mirroring finished!
 Clonare site terminată!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 A survenit o eroare în timpul operaţiei de clonare
 \nDuring:\n
 \nDurează:\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Operaţia de clonare terminată. \nClick Ieşire pentru a părăsi WinHTTrack. \nVezi fişierele jurnal dacă este necesar, pentru a vă asigura că totul e OK. \n\nVă mulţumim că folosiţi WinHTTrack!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * *CLONARE ÎNTRERUPTĂ! * * \r\nCache-ul teporar este necesar pentru orice operaţie de actualizare şi nu conţine decât datele descărcate în timpul sesiunii curente întrerupte.\r\nCache-ul precedent poate conţine informaţia mai completă; dacă nu doriţi să pierdeţi aceste date, trebuie să restauraţi şi să ştergeţi cache-ul curent\r\n(Notă: Această operaţie poate fi făcută cu uşurinţă prin ştergerea fişierelor hts-cache/new.*)\r\n\r\n Credeşi că vechiul cache poate conţine mai multe informaţii şi doriţi să le restauraţi?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * EROARE CLONARE! * *\r\nHTTrack a detectat că, clona curentă este goală. Dacă a fost o actualizare, clona precedentă a fost restaurată.\r\nMotivul: Fie prima(ele) pagină(i) nu pot(ate) fi găsită(e), fie a intervenit o problemă de conectare.\r\n=>Asiguraţi-vă că situl există şi/sau verificaţi setările legate de proxy!<=
 \n\nTip: Click [View log file] to see warning or error messages
 \n\nSfat:Click [Vizualizează fişierul jurnal] pentru a vedea mesajele de avertizare sau eroare.
@@ -926,5 +926,5 @@ You can now close this window
 Acum puteţi închide această fereastră.
 Server terminated
 Server terminat
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 A survenit o eroare fatală în timpul acestei clonări.

lang/Russian.txt

@@ -23,7 +23,7 @@ Cancel changes
 Click to confirm
 Ïîäòâåðäèòü
 Click to get help!
-Ïîëó÷èòü ñïðàâêó
+Ñïðàâêà
 Click to return to previous screen
 Âåðíóòüñÿ íàçàä
 Click to go to next screen
@@ -39,9 +39,9 @@ Delete this project?
 Delete empty project %s?
 Óäàëèòü ïóñòîé ïðîåêò %s?
 Action not yet implemented
-Ïîêà íå ðåàëèçîâàíî
+Äåéñòâèå íå ðåàëèçîâàíî
 Error deleting this project
-Îøèáêà óäàëåíèÿ ïðîåêòà
+Îøèáêà óäàëåíèÿ ýòîãî ïðîåêòà
 Select a rule for the filter
 Âûáðàòü òèï ôèëüòðà
 Enter keywords for the filter
@@ -51,11 +51,11 @@ Cancel
 Add this rule
 Äîáàâèòü ýòî óñëîâèå
 Please enter one or several keyword(s) for the rule
-Ââåäèòå çíà÷åíèÿ óñëîâèé ôèëüòðà
+Ââåäèòå îäíî èëè íåñêîëüêî çíà÷åíèé óñëîâèé ôèëüòðà
 Add Scan Rule
 Äîáàâèòü ôèëüòð
 Criterion
-Âûáðàòü òèï:
+Âûáðàòü êðèòåðèè:
 String
 Ââåñòè çíà÷åíèå:
 Add
@@ -63,19 +63,19 @@ Add
 Scan Rules
 Ôèëüòðû
 Use wildcards to exclude or include URLs or links.\nYou can put several scan strings on the same line.\nUse spaces as separators.\n\nExample: +*.zip -www.*.com -www.*.edu/cgi-bin/*.cgi
-Èñïîëüçóÿ ìàñêè âû ìîæåòå èñêëþ÷èòü/âêëþ÷èòü ñðàçó íåñêîëüêî àäðåñîâ\nÊàê ðàçäåëèòåëü ôèëüòðîâ èñïîëüçóéòå çàïÿòûå èëè ïðîáåëû.\nÏðèìåð: +*.zip -www.*.com,-www.*.edu/cgi-bin/*.cgi
+Èñïîëüçóÿ ìàñêè âû ìîæåòå èñêëþ÷èòü/âêëþ÷èòü ñðàçó íåñêîëüêî àäðåñîâ èëè ññûëîê.\nÊàê ðàçäåëèòåëü ôèëüòðîâ èñïîëüçóéòå çàïÿòûå èëè ïðîáåëû.\nÏðèìåð: +*.zip -www.*.com,-www.*.edu/cgi-bin/*.cgi
 Exclude links
-Èñêëþ÷èòü...
+Èñêëþ÷èòü
 Include link(s)
-Âêëþ÷èòü...
+Âêëþ÷èòü
 Tip: To have ALL GIF files included, use something like +www.someweb.com/*.gif. \n(+*.gif / -*.gif will include/exclude ALL GIFs from ALL sites)
-Ñîâåò: Åñëè âû õîòèòå ñêà÷àòü âñå gif-ôàéëû, èñïîëüçóéòå, íàïðèìåð, òàêîé ôèëüòð +www.someweb.com/*.gif. \n(+*.gif / -*.gif ðàçðåøàåò/çàïðåùàåò äëÿ ñêà÷èâàíèÿ ÂÑÅ gif-ôàéëû íà ÂÑÅÕ ñàéòàõ)
+Ñîâåò: Êàê ïðèìåð åñëè âû õîòèòå ñêà÷àòü âñå âêëþ÷åííûå gif-ôàéëû, èñïîëüçóéòå òàêîé ôèëüòð +www.someweb.com/*.gif. \n(+*.gif / -*.gif ðàçðåøàåò/çàïðåùàåò äëÿ ñêà÷èâàíèÿ ÂÑÅ gif-ôàéëû íà ÂÑÅÕ ñàéòàõ)
 Save prefs
 Ñîõðàíèòü íàñòðîéêè
 Matching links will be excluded:
-Ëèíêè, óäîâëåòâîðÿþùèå ýòîìó óñëîâèþ áóäóò èñêëþ÷åíû:
+Ññûëêè ïîäõîäÿùèå ïîä ýòî óñëîâèå áóäóò èñêëþ÷åíû:
 Matching links will be included:
-Ëèíêè, óäîâëåòâîðÿþùèå ýòîìó óñëîâèþ áóäóò âêëþ÷åíû:
+Ññûëêè ïîäõîäÿùèå ïîä ýòî óñëîâèå áóäóò âêëþ÷åíû:
 Example:
 Ïðèìåð:
 gif\r\nWill match all GIF files
@@ -83,9 +83,9 @@ gif\r\n
 blue\r\nWill find all files with a matching 'blue' sub-string such as 'bluesky-small.jpeg'
 blue\r\nÎòëîâèò âñå ôàéëû, ñîäåðæàùèå â èìåíè ïîäñòðîêó 'blue', íàïðèìåð 'bluesky-small.jpeg'
 bigfile.mov\r\nWill match the file 'bigfile.mov', but not 'bigfile2.mov'
-bigfile.mov\r\nÎòëîâèò ôàéë 'bigfile.mov', íî, â òîæå âðåìÿ, ïðîïóñòèò ôàéë 'bigfile2.mov'
+bigfile.mov\r\nÎòëîâèò ôàéë 'bigfile.mov', íî, â òî æå âðåìÿ, ïðîïóñòèò ôàéë 'bigfile2.mov'
 cgi\r\nWill find links with folder name matching sub-string 'cgi' such as /cgi-bin/somecgi.cgi
-cgi\r\nÎòëîâèò àäðåñà, ñîäåðæàùèå êàòàëîãè ñ ïîäñòðîêîé 'cgi', òàêèå êàê /cgi-bin/somecgi.cgi
+cgi\r\nÎòëîâèò àäðåñà, ñîäåðæàùèå êàòàëîãè ñ ïîäñòðîêîé 'cgi', òàêèå, êàê /cgi-bin/somecgi.cgi
 cgi-bin\r\nWill find links with folder name matching whole 'cgi-bin' string (but not cgi-bin-2, for example)
 cgi-bin\r\nÎòëîâèò àäðåñà, ñîäåðæàùèå êàòàëîã 'cgi-bin' (íî íå cgi-bin-2, íàïðèìåð)
 someweb.com\r\nWill find links with matching sub-string such as www.someweb.com, private.someweb.com etc.
@@ -109,7 +109,7 @@ Existing filters
 Cancel changes
 Îòìåíèòü èçìåíåíèÿ
 Save current preferences as default values
-Ñîõðàíèòü òåêóùèå íàñòðîéêè êàê çíà÷åíèÿ ïî óìîë÷àíèþ
+Ñîõðàíèòü òåêóùèå èçìåíåíèÿ êàê ïî óìîë÷àíèþ
 Click to confirm
 Ïîäòâåðäèòü
 No log files in %s!
@@ -117,7 +117,7 @@ No log files in %s!
 No 'index.html' file in %s!
 Îòñóòñòâóåò ôàéë index.html â %s!
 Click to quit WinHTTrack Website Copier
-Âûéòè èç ïðîãðàììû WinHTTrack Website Copier
+Âûéòè èç ïðîãðàììû
 View log files
 Ïðîñìîòð ëîã ôàéëîâ
 Browse HTML start page
@@ -181,7 +181,7 @@ Parsing HTML file (testing links)..
 Pause - Toggle [Mirror]/[Pause download] to resume operation
 Îñòàíîâëåíî (äëÿ ïðîäîëæåíèÿ âûáåðèòå [Çåðêàëî]/[Ïðèîñòàíîâèòü çàêà÷êó])
 Finishing pending transfers - Select [Cancel] to stop now!
-Çàâåðøàþòñÿ îòëîæåííûå çàêà÷êè - ÷òîáû ïðåðâàòü, íàæìèòå Cancel!
+Çàâåðøàþòñÿ îòëîæåííûå çàêà÷êè — ÷òîáû ïðåðâàòü, íàæìèòå Cancel!
 scanning
 ñêàíèðóåì
 Waiting for scheduled time..
@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 Ñîçäàåòñÿ çåðêàëî [%s, %s áàéò]
 Site mirroring finished!
 Ñîçäàíèå çåðêàëà çàâåðøåíî!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
  ïðîöåññå çàêà÷êè ïðîèçîøëà îøèáêà\n
 \nDuring:\n
  òå÷åíèå:\n
@@ -204,12 +204,12 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Ñîçäàíèå çåðêàëà çàâåðøåíî.\nÄëÿ âûõîäà èç ïðîãðàììû íàæìèòå êíîïêó OK.\nÄëÿ ïðîâåðêè óñïåøíîñòè çàêà÷êè ïîñìîòðèòå ëîã ôàéë(û).\n\nÑïàñèáî çà èñïîëüçîâàíèå WinHTTrack!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * ÇÀÊÀ×ÊÀ ÏÐÅÐÂÀÍÀ! * *\r\nÂðåìåííûé êýø, ñîçäàííûé âî âðåìÿ òåêóùåé ñåññèé, ñîäåðæèò äàííûå, çàãðóæåííûå òîëüêî âî âðåìÿ äàííîé ñåññèè è ïîòðåáóåòñÿ òîëüêî â ñëó÷àå âîçîáíîâëåíèÿ çàêà÷êè.\r\nÎäíàêî, ïðåäûäóùèé êýø ìîæåò ñîäåðæàòü áîëåå ïîëíóþ èíôîðìàöèþ. Åñëè âû íå õîòèòå ïîòåðÿòü ýòè äàííûå, âàì íóæíî óäàëèòü òåêóùèé êýø è âîçîáíîâèòü ïðåäûäóùèé.\r\n(Ýòî ìîæíî ëåãêî ñäåëàòü ïðÿìî çäåñü, óäàëèâ ôàéëû hts-cache/new.]\r\n\r\nÑ÷èòàåòå ëè âû, ÷òî ïðåäûäóùèé êýø ìîæåò ñîäåðæàòü áîëåå ïîëíóþ èíôîðìàöèþ, è õîòèòå ëè âû âîññòàíîâèòü åãî?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
-* * ÎØÈÁÊÀ! * *\r\nÒåêóùåå çåðêàëî - ïóñòî. Åñëè ýòî áûëî îáíîâëåíèå, ïðåäûäóùàÿ âåðñèÿ çåðêàëà âîññòàíîâëåíà.\r\nÏðè÷èíà: ïåðâàÿ ñòðàíèöà(û) èëè íå íàéäåíà, èëè áûëè ïðîáëåìû ñ ñîåäèíåíèåì.\r\n=> Óáåäèòåñü, ÷òî âåáñàéò âñå åùå ñóùåñòâóåò, è/èëè ïðîâåðüòå óñòàíîâêè ïðîêñè-ñåðâåðà! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * ÎØÈÁÊÀ! * *\r\nÒåêóùåå çåðêàëî — ïóñòî. Åñëè ýòî áûëî îáíîâëåíèå, ïðåäûäóùàÿ âåðñèÿ çåðêàëà âîññòàíîâëåíà.\r\nÏðè÷èíà: ïåðâàÿ ñòðàíèöà(û) èëè íå íàéäåíà, èëè áûëè ïðîáëåìû ñ ñîåäèíåíèåì.\r\n=> Óáåäèòåñü, ÷òî âåáñàéò âñå åùå ñóùåñòâóåò, è/èëè ïðîâåðüòå óñòàíîâêè ïðîêñè-ñåðâåðà! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \nÏîäñêàçêà: Äëÿ ïðîñìîòðà ñîîáùåíèé îá îøèáêàõ è ïðåäóïðåæäåíèé íàæìèòå [Ïðîñìîòð ëîã ôàéëà]
 Error deleting a hts-cache/new.* file, please do it manually
-Îøèáêà óäàëåíèÿ ôàéëà hts-cache/new.* , ïîæàëóéñòà, óäàëèòå åãî âðó÷íóþ.\r\n
+Îøèáêà óäàëåíèÿ ôàéëà hts-cache/new.*\r\nÏîæàëóéñòà, óäàëèòå ôàéë âðó÷íóþ.\r\n
 Do you really want to quit WinHTTrack Website Copier?
 Âû äåéñòâèòåëüíî õîòèòå âûéòè èç WinHTTrack?
 - Mirroring Mode -\n\nEnter address(es) in URL box
@@ -319,7 +319,7 @@ Pause Download?
 Stop the mirroring operation
 Ïðåðâàòü çàêà÷êó
 Minimize to System Tray
-Ñïðÿòàòü â ñèñòåìíûé òðýé
+Ñïðÿòàòü â ñèñòåìíûé òðåé
 Click to skip a link or stop parsing
 Ïðîïóñòèòü ëèíê èëè ïðåðâàòü àíàëèç ôàéëà
 Click to skip a link
@@ -327,7 +327,7 @@ Click to skip a link
 Bytes saved
 Ñîõðàíåíî áàéò:
 Links scanned
-Ïðîñêàíèðîâàíî ëèíêîâ:
+Ïðîñêàíèðîâàíî ññûëîê:
 Time:
 Âðåìÿ:
 Connections:
@@ -363,7 +363,7 @@ Choose local site structure
 Set user-defined structure on disk
 Óñòàíîâèòü çàäàííóþ ëîêàëüíóþ ñòðóêòóðó ñàéòà
 Use a cache for updates and retries
-Èñïîëüçîâàòü êýø äëÿ îáíîâëåíèÿ è äîêà÷êè
+Èñïîëüçîâàòü êýø äëÿ îáíîâëåíèÿ è ïîâòîðîâ ñêà÷èâàíèÿ
 Do not update zero size or user-erased files
 Íå êà÷àòü ôàéëû, êîòîðûå áûëè îäíàæäû ñêà÷àíû, äàæå åñëè îíè íóëåâîé äëèíû èëè óäàëåíû
 Create a Start Page
@@ -407,7 +407,7 @@ Maximum amount of bytes to retrieve from the Web
 Make a pause after downloading this amount of bytes
 Ïîñëå çàãðóçêè óêàçàííîãî ÷èñëà áàéòîâ, ñäåëàòü ïàóçó
 Maximum duration time for the mirroring operation
-Ìàêñ. ïðîäîëæèòåëüíîñòü çåðêàëèçàöèè
+Ìàêñ. ïðîäîëæèòåëüíîñòü ïðîöåññà ñîçäàíèÿ çåðêàë
 Maximum transfer rate
 Ìàêñ. ñêîðîñòü çàêà÷êè
 Maximum connections/seconds (avoid server overload)
@@ -445,7 +445,7 @@ Log file type (if generated)
 Maximum mirroring depth from root address
 Ìàêñ. ãëóáèíà ñîçäàíèÿ çåðêàëà îò íà÷àëüíîãî àäðåñà
 Maximum mirroring depth for external/forbidden addresses (0, that is, none, is the default)
-Ìàêñèìàëüíàÿ ãëóáèíà çàêà÷êè äëÿ âíåøíèõ/çàïðåùåííûõ àäðåñîâ (0, ò.å., íåò îãðàíè÷åíèé, ýòî çíà÷åíèå ïîóìîë÷àíèþ)
+Ìàêñèìàëüíàÿ ãëóáèíà çàêà÷êè äëÿ âíåøíèõ/çàïðåùåííûõ àäðåñîâ (0, ò.å., íåò îãðàíè÷åíèé, ýòî çíà÷åíèå ïî óìîë÷àíèþ)
 Create a debugging file
 Ñîçäàòü ôàéë ñ îòëàäî÷íîé èíôîðìàöèåé
 Use non-standard requests to get round some server bugs
@@ -453,19 +453,19 @@ Use non-standard requests to get round some server bugs
 Use old HTTP/1.0 requests (limits engine power!)
 Èñïîëüçîâàòü ñòàðûé ïðîòîêîë HTTP/1.0 (îãðàíè÷èò âîçìîæíîñòè ïðîãðàììû!)
 Attempt to limit retransfers through several tricks (file size test..)
-Ïîïûòêà îãðàíè÷èòü ïåðåêà÷êó èñïîëüóÿ íåêîòîðûå ïðèåìû (òåñò íà ðàçìåð ôàéëà..)
+Ïîïûòêà îãðàíè÷èòü ïåðåêà÷êó èñïîëüçóÿ íåêîòîðûå ïðèåìû (òåñò íà ðàçìåð ôàéëà..)
 Attempt to limit the number of links by skipping similar URLs (www.foo.com==foo.com, http=https ..)
 Îãðàíè÷èòü ÷èñëî ëèíêîâ, óäàëÿÿ àíàëîãè÷íûå ëèíêè (www.foo.com==foo.com, http=https ..)
 Write external links without login/password
 Ñîõðàíÿòü âíåøíèå ëèíêè áåç ëîãèíà/ïàðîëÿ
 Write internal links without query string
-Ñîõðàíÿòü âíóòðåííèå ëèíêè óñå÷åííî (äî çàíàêà ?)
+Ñîõðàíÿòü âíóòðåííèå ëèíêè óñå÷åííî (äî çíàêà ?)
 Get non-HTML files related to a link, eg external .ZIP or pictures
 Êà÷àòü íå-html ôàéëû âáëèçè ññûëêè (íàïð.: âíåøíèå .ZIP èëè ãðàô. ôàéëû)
 Test all links (even forbidden ones)
 Ïðîâåðÿòü âñå ëèíêè (äàæå çàïðåùåííûå ê çàêà÷êå)
 Try to catch all URLs (even in unknown tags/code)
-Ñòàðàòüñÿ îïðåäåëÿòü âñå URL'û (äàæå â íåîïîçíàííûõ òýãàõ/ñêðèïòàõ)
+Ñòàðàòüñÿ îïðåäåëÿòü âñå URL'û (äàæå â íåîïîçíàííûõ òåãàõ/ñêðèïòàõ)
 Get HTML files first!
 Ïîëó÷èòü âíà÷àëå HTML ôàéëû!
 Structure type (how links are saved)
@@ -599,7 +599,7 @@ Do you really want to quit WinHTTrack Website Copier?
 Do not connect to a provider (already connected)
 Íå ñîåäèíÿòüñÿ ñ ïðîâàéäåðîì (ñîåäèíåíèå óæå óñòàíîâëåíî)
 Do not use remote access connection
-Íå èñïîüçîâàòü óäàëåííîé ñîåäèíåíèÿ
+Íå èñïîëüçîâàòü óäàëåííîé ñîåäèíåíèÿ
 Schedule the mirroring operation
 Çàêà÷êà ïî ðàñïèñàíèþ
 Quit WinHTTrack Website Copier
@@ -633,9 +633,9 @@ Connect to this provider
 Disconnect when finished
 Îòñîåäèíèòüñÿ ïðè çàâåðøåíèè
 Disconnect modem on completion
-Îòñîåäåíèòü ïðè çàâåðøåíèè
+Îòñîåäèíèòü ïðè çàâåðøåíèè
 \r\n(Please notify us of any bug or problem)\r\n\r\nDevelopment:\r\nInterface (Windows): Xavier Roche\r\nSpider: Xavier Roche\r\nJavaParserClasses: Yann Philippot\r\n\r\n(C)1998-2003 Xavier Roche and other contributors\r\nMANY THANKS for translation tips to:\r\nRobert Lagadec (rlagadec@yahoo.fr)
-\r\n(Ñîîáùèòå íàì ïîæàëóéñòà î çàìå÷åííûõ ïðîáëåìàõ è îøèáêàõ)\r\n\r\nÐàçðàáîòêà:\r\nÈíòåðôåéñ (Windows): Xavier Roche\r\nÊà÷àëêà (spider): Xavier Roche\r\nÏàðñåð ÿâà-êëàññîâ: Yann Philippot\r\n\r\n(C)1998-2003 Xavier Roche and other contributors\r\nMANY THANKS for Russian translations to:\r\nAndrei Iliev (andreiiliev@mail.ru)
+\r\n(Ñîîáùèòå íàì, ïîæàëóéñòà, î çàìå÷åííûõ ïðîáëåìàõ è îøèáêàõ)\r\n\r\nÐàçðàáîòêà:\r\nÈíòåðôåéñ (Windows): Xavier Roche\r\nÊà÷àëêà (spider): Xavier Roche\r\nÏàðñåð ÿâà-êëàññîâ: Yann Philippot\r\n\r\n(C)1998-2003 Xavier Roche and other contributors\r\nMANY THANKS for Russian translations to:\r\nAndrei Iliev (andreiiliev@mail.ru)
 About WinHTTrack Website Copier
 Î ïðîãðàììå WinHTTrack Website Copier
 Please visit our Web page
@@ -657,9 +657,9 @@ Ignore domain
 Catch this page only
 Ñêà÷àòü òîëüêî ýòó ñòðàíè÷êó
 Mirror site
-Çåðêàëèçîâàòü ñàéò
+Ñäåëàòü çåðêàëî ñàéòó
 Mirror domain
-Çåðêàëèçîâàòü äîìåí
+Ñäåëàòü çåðêàëî äîìåíó
 Ignore all
 Èãíîðèðîâàòü âñå
 Wizard query
@@ -693,9 +693,9 @@ Hide
 About WinHTTrack Website Copier
 Î ïðîãðàììå...
 Check program updates...
-Ïðîâåðèòü íàëè÷èå îáíîâëåííèé ïðîãðàììû...
+Ïðîâåðèòü íàëè÷èå îáíîâëåíèé ïðîãðàììû...
 &Toolbar
-Ïàíåëü èíñòðóïåíòîâ
+Ïàíåëü èíñòðóìåíòîâ
 &Status Bar
 Ïàíåëü ñîñòîÿíèÿ
 S&plit
@@ -926,5 +926,5 @@ You can now close this window
 Òåïåðü Âû ìîæåòå çàêðûòü ýòî îêíî
 Server terminated
 Server terminated
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 Âî âðåìÿ òåêóùåé çàêà÷êè ïðîèçîøëà ôàòàëüíàÿ îøèáêà

lang/Slovak.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 Prebieha kopírovanie stránky [%s, %s bytov]
 Site mirroring finished!
 Kopírovanie stránky ukonèené!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Poèas kopírovania sa vyskytol problém\n
 \nDuring:\n
 \nPoèas:\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Operácia kopírovania ukonèená.\nKliknutím na Exit opusti<74> WinHTTrack.\nPozrie<69> protokoly súbor(y), ak sa treba uisti<74>, že všetkoje v poriadku.\n\nVïaka za použitie WinHTTrack!\r\n
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * KOPÍROVANIE PRERUŠENÉ! * *\r\nAktuálna doèasná cache je potrebná prevšetky aktualizaèné operácie a obsahuje iba dáta stiahnuté poèas tejto prerušenej operácie\r\nPredchádzajúca chache môže obsahova<76> kompletnejšie informácie. Ak sa tieto informácie nemajú strati<74>, treba ju obnovi<76> a vymaza<7A> terajšiu aktuálnu cache.\r\n[Poznámka: Dá sa to urobi<62> teraz vymazaním  súborov hts-cache/new.* ]\r\n\r\nObsahuje predchádzajúca cache obsahuje kompletnejšiu informáciu a má sa obnovi<76>?\r\n
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * CHYBA KOPÍROVANIA! * *\r\nHTTrack zistil, že táto kópia je prázdna. Ak mala by<62> aktualizovaná, predchádzajúca kópia bola obnovená.\r\nDôvod: Úvodná stránka buï nebola nájdená, alebo nastal problém so spojením.\r\n=> Presvedèi<C3A8> sa,  èi webstránka ešte existuje a/alebo skontrolova<76> vlastné nastavenie proxy! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \n\nTip: Kliknú<6E> na [Zobrazi<7A> protokol] a pozrie<69> na upozornania alebo chybové hlásenia
@@ -926,5 +926,5 @@ You can now close this window
 
 Server terminated
 
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 

lang/Slovenian.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 
 Site mirroring finished!
 Zrcaljenje strani je dokonèano!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Prišlo je do napake med zrcaljenjem strani\n
 \nDuring:\n
 \nmed:\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Zrcaljenje je popolnoma dokonèano.\nKliknite na gumb Izhod za konec dela s programom WinHTTrack.\nPreberite log datoteko(e), èe se želite preprièati, da je bilo vse vredu.\n\nZahvaljujemo se za to, da ste uporabljali WinHTTrack!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * ZRCALJENJE JE PREKINJENO! * *\r\nTekoèi zaèasni predpomnilnik je bil zahtevan za kaktere koli postopke nadgradnje in vsebuje le prenešene podatke znotraj prekinjene seje.\r\nOblikovani predpomnilnik vsebuje veè popolnih informacij; èe ne želite izgubiti teh podatkov jih lahko obnovite in zbrišete tekoèi predpomnilnik.\r\n[Opomba: To lahko enostavneje storite, èe boste roèno zbrisali hts-cache/ nemudoma * datoteke]\r\n\r\nMislite, da oblikovani predpomnilnik vsebuje veè popolnih informacij in jih želite obnoviti?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * NAPAKA MED ZRCALJENJEM! * *\r\nHTTrack je ugotovil, da je aktivno zrcaljenje prazno. Èe je bilo nadgrajeno bo obnovljeno prejšnje zrcaljenje.\r\nVzrok: prva stran ni bila najdena ali pa vsebuje napake.\r\n=> Preprièajte se ali spletna stran sploh obstaja in/ ali ste preverili vaše nastavitve proxy strežnika! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \n\nNamig: Kliknite na [Preglej log datoteko] kjer boste lahko prebrali vsa opozorila in sporoèila o napakah
@@ -926,5 +926,5 @@ You can now close this window
 
 Server terminated
 
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 

lang/Svenska.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 Webb kopieras nu  [%s, %s bytes]
 Site mirroring finished!
 Kopieringen är avslutad !
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Det uppstod ett problem under kopieringen
 \nDuring:\n
 \nUnder:\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Webb kopieringen är utförd. \nKlicka OK för att avsluta WinHTTrack.\nGranska log-fil(erna) för att kontrollera att allt har fungerat.\n\nTack för att du avänder WinHTTrack!\r\n
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * KOPIERINGEN ÄR AVBRUTEN! * *\r\nDen nuvarnde cachen är obligatorisk för alla uppdaterings operationer och innehåller data från senaste nerladdning med den aktuella avbrutna överföringen.\r\nDen tidigare cachen kan innehålla mera komplett information; on du önskar att spara den informationen, ska du återskapa den och radera den aktuella cachen.\r\n[Note: Detta kan lättast göras genom att radera samtliga 'hts-cache/new.* filer]\r\n\r\nTror du att den tidigare cache-fil eventuellt innehåler mera komplett information, och vill du återställa den?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * KOPIERINGSFEL! * *\r\nWinHTTrack har upptäckt att den nuvarande webb-kopieringen är tom. Om det var en uppdatering du utförde, har den gamla kopian återskapats.\r\nMöjlig fel: Den första sidan kunde antingen inte hittas eller uppstod det ett problem med förbindelsen.\r\n=> Kontrollera att webbservern finns och/eller kontrollera Proxy-inställningen! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \n\nTips: Klicka [Granska log fil]  för att granska varning/fel-meddelande
@@ -926,5 +926,5 @@ You can now close this window
 
 Server terminated
 
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 

lang/Turkish.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 Sitenin yansýsý alýnýyor [%s, %s bayt]
 Site mirroring finished!
 Sitenin yansýsý alýndý!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Yansý iþlemi sýrasýnda bir hata oluþtu\n
 \nDuring:\n
 \nSüresince:\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Yansý iþlemi tamamlandý.\nWinHTTrac'dan çýkmak için Çýk'a týklayýn.\nHerþeyin düzgün yapýldýðýndan emin olmak için kayýt dosyasýna bakabilirsiniz.\n\nWinHTTrack kullandýðýnýz için teþekkürler!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * YANSI ÝÞLEMÝ ÝPTAL EDÝLDÝ! * *\r\nHerhangi bir güncelleme iþlemi için þuanki geçici kayýtlar gereklidir ve bu kayýtlar indirilen dosyalarý tutarlar.\r\nBiçimlendirilmiþ kayýt daha fazla bilgi içerebilir; eðer bu bilgiyi kaybetmek istemiyorsanýz, bu kaydý yedekleyebilir ve geçici olanýný silebilirsiniz.\r\n[Not: Bu iþlemi hts-cache/new.* dosyalarýný silerek kolaylýkla yapabilirsiniz]\r\n\rBiçimlendirilmiþ kaydý geri almak istiyor musunuz?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * YANSI ÝÞLEMÝ HATASI! * *\r\nHTTrack kullanýlan yanýsnýn boþ olduðunu tespit etti. Eðer bu bir güncelleme ise, önceki yansý geri alýnabilir.\r\nNeden: baþlangýç sayfa(lar)ý bulunamadý veya bir baðlantý problemi oluþtu.\r\n=> Web sitesinin olup olmadýðýný ve vekil sunucu ayarlarýnýzý kontrol edin! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \n\Ýpucu: Hata ve uyarý mesajlarýný görmek için [Kayýt dosyasýný göster]'e týklayýnn
@@ -926,5 +926,5 @@ You can now close this window
 Bu pencereyi artýk kapatabilirsiniz
 Server terminated
 Sunucu sonlandýrdý
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 Bu yansýlama iþlemi sýrasýnda ölümcül bir hata oluþtu

lang/Ukrainian.txt

@@ -194,7 +194,7 @@ Site mirroring in progress [%s, %s bytes]
 Ñòâîðþºòüñÿ äçåðêàëî [%s, %s áàéò]
 Site mirroring finished!
 Ñòâîðåííÿ äçåðêàëà çàâåðøåíå!
-A problem occured during the mirroring operation\n
+A problem occurred during the mirroring operation\n
 Ó ïðîöåñ³ çàâàíòàæåííÿ â³äáóëàñÿ ïîìèëêà\n
 \nDuring:\n
 Ó ïëèí³:\n
@@ -204,7 +204,7 @@ Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) i
 Ñòâîðåííÿ äçåðêàëà çàâåðøåíå.\näëÿ âèõîäó ç ïðîãðàìè íàòèñí³òü êíîïêó OK.\näëÿ ïåðåâ³ðêè óñï³øíîñò³ çàâàíòàæåííÿ ïîäèâèòåñÿ ëîã ôàéë(è).\n\näÿêóºìî çà âèêîðèñòàííÿ WinHTTrack!
 * * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
 * * ÇÀÂÀÍÒÀÆÅÍÍß ÏÅÐÅÐÂÀÍÅ! * *\r\nòèì÷àñîâèé êåø, ñòâîðåíèé ï³ä ÷àñ ïîòî÷íî¿ ñåñ³¿, ì³ñòèòü äàí³, çàâàíòàæåí³ ò³ëüêè ï³ä ÷àñ äàíî¿ ñåñ³¿ ³ áóäå ïîòð³áíèé ò³ëüêè ó âèïàäêó ïîíîâëåííÿ çàâàíòàæåííÿ.\r\nàëå, ìîæå ì³ñòèòè á³ëüø ïîâíó ³íôîðìàö³þ. ßêùî âè íå õî÷åòå âòðàòèòè ö³ äàí³, âàì ïîòð³áíî âèäàëèòè ïîòî÷íèé êåø ³ â³äíîâèòè ïîïåðåäí³é.\r\n(Öå ìîæíà ëåãêî çðîáèòè ïðÿìî òóò, âèäàëèâøè ôàéëè hts-cache/new.]\r\n\r\nÂè ââàæàºòå, ùî ïîïåðåäí³é êåø ìîæå ì³ñòèòè á³ëüø ïîâíó ³íôîðìàö³þ, ³ ÷è õî÷åòå âè â³äíîâèòè éîãî?
-* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occured.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
 * * ÏÎÌÈËÊÀ! * *\r\nöå äçåðêàëî - ïîðîæíº. ßêùî öå áóëî â³äíîâëåííÿ, âåðñ³ÿ äçåðêàëà â³äíîâëåíà.\r\nïðè÷èíà: ïåðøà ñòîð³íêà(è) ÷è íå çíàéäåíà, ÷è áóëè ïðîáëåìè ç ç'ºäíàííÿì.\r\n=> Ïåðåêîíàéòåñÿ, ùî âåáñàéò ùå ³ñíóº, ³/÷è ïåðåâ³ðòå  óñòàíîâêè ïðîêñ³-ñåðâåðà! <=
 \n\nTip: Click [View log file] to see warning or error messages
 \nïîäñêàçêà:Äëÿ ïåðåãëÿäó ïîâ³äîìëåíü ïðî ïîìèëêè ³ ïîïåðåäæåíü íàòèñí³òü [Ïåðåãëÿä ëîã ôàéëó]
@@ -926,5 +926,5 @@ You can now close this window
 
 Server terminated
 
-A fatal error has occured during this mirror
+A fatal error has occurred during this mirror
 

lang/Uzbek.txt

@@ -0,0 +1,930 @@
+LANGUAGE_NAME
+Uzbek Latin
+LANGUAGE_FILE
+Uzbek
+LANGUAGE_ISO
+uz
+LANGUAGE_AUTHOR
+Shamsiddinov Zafar (zfrx94 at mail.ru) \r\n
+LANGUAGE_CHARSET
+windows-1251
+LANGUAGE_WINDOWSID
+Uzbek Latin
+OK
+OK
+Cancel
+Bekor qilmoq
+Exit
+Chiqish
+Close
+Yopmoq
+Cancel changes
+O’zgarishlarni bekor qilmoq
+Click to confirm
+Tasdiqlamoq
+Click to get help!
+Yordam olmoq
+Click to return to previous screen
+Ortga qaytmoq
+Click to go to next screen
+Keyingi ekranga o’tish
+Hide password
+Parolni berkitmoq
+Save project
+Loyihani saqlamoq
+Close current project?
+Joriy loyiha yopilsinmi?
+Delete this project?
+Ushbu loyiha o’chirilsinmi?
+Delete empty project %s?
+Bo’sh %s loyihasi o’chirilsinmi?
+Action not yet implemented
+Hozircha tadbiq etilmagan
+Error deleting this project
+Loyihani o’chirishda xatolik
+Select a rule for the filter
+Filtr turini tanlamoq
+Enter keywords for the filter
+Filtr uchun qiymat kiritish
+Cancel
+Bekor qilmoq
+Add this rule
+Bu shartni qo’shmoq
+Please enter one or several keyword(s) for the rule
+Filtr shartini kiriting
+Add Scan Rule
+Filtr qo’shmoq
+Criterion
+Turni tanlamoq:
+String
+Qiymat kiritish:
+Add
+Qo’shmoq
+Scan Rules
+Filtrlar
+Use wildcards to exclude or include URLs or links.\nYou can put several scan strings on the same line.\nUse spaces as separators.\n\nExample: +*.zip -www.*.com -www.*.edu/cgi-bin/*.cgi
+Niqobdan foydalanib siz bir necha manzillarni bira yo’la mustasno/yoqishingiz mumkin\nFiltrlarni ajratish uchun vergul yoki probeldan foydalaning.\nMasalan: +*.zip -www.*.com,-www.*.edu/cgi-bin/*.cgi
+Exclude links
+Mustasno qilmoq...
+Include link(s)
+Yoqmoq...
+Tip: To have ALL GIF files included, use something like +www.someweb.com/*.gif. \n(+*.gif / -*.gif will include/exclude ALL GIFs from ALL sites)
+Maslahat: Agar hamma gif-fayllarni ko’chirib olmoqchi bo’lsangiz, unda +www.someweb.com/*.gif. filtrdan foydalaning.\n(+*.gif / -*.gif  barcha gif-fayllarni barcha saytlardan, ko’chirib olishni ruxsat etadi/taqiqlaydi.)
+Save prefs
+Moslashtirishni saqlamoq
+Matching links will be excluded:
+Ëèíêè, óäîâëåòâîðÿþùèå ýòîìó óñëîâèþ áóäóò èñêëþ÷åíû:
+Matching links will be included:
+Ëèíêè, óäîâëåòâîðÿþùèå ýòîìó óñëîâèþ áóäóò âêëþ÷åíû:
+Example:
+Masalan:
+gif\r\nWill match all GIF files
+gif\r\nHamma gif fayllarni aniqlaydi (yoki GIF)
+blue\r\nWill find all files with a matching 'blue' sub-string such as 'bluesky-small.jpeg'
+blue\r\n'blue' nomi ostidagi hamma fayllarni topadi, masalan 'bluesky-small.jpeg'
+bigfile.mov\r\nWill match the file 'bigfile.mov', but not 'bigfile2.mov'
+bigfile.mov\r\n'bigfile.mov' faylini topadi, ammo 'bigfile2.mov' faylini emas
+cgi\r\nWill find links with folder name matching sub-string 'cgi' such as /cgi-bin/somecgi.cgi
+cgi\r\n'cgi' satriostidagilarni topadi, /cgi-bin/somecgi.cgi ga o’xshash
+cgi-bin\r\nWill find links with folder name matching whole 'cgi-bin' string (but not cgi-bin-2, for example)
+cgi-bin\r\n'cgi-bin' jildi tarkibidagi manzillarni tutib olmoq (lekin cgi-bin-2 emas, masalan)
+someweb.com\r\nWill find links with matching sub-string such as www.someweb.com, private.someweb.com etc.
+someweb.com\r\nwww.someweb.com, private.someweb.com v. b. shunga o’xshash havolalarni tutib olmoq
+someweb\r\nWill find links with matching folder sub-string such as www.someweb.com, www.someweb.edu, private.someweb.otherweb.com etc.
+someweb\r\nÎòëîâèò àäðåñà òèïà www.someweb.com, www.someweb.edu, private.someweb.otherweb.com è ò.ä.\r\n
+www.someweb.com\r\nWill find links matching whole 'www.someweb.com' sub-string (but not links such as private.someweb.com/..)
+www.someweb.com\r\nÎòëîâèò àäðåñà, òàêèå êàê www.someweb.com/... (íî íå òàêèå, êàê private.someweb.com/..)
+someweb\r\nWill find any links with matching sub-string such as www.someweb.com/.., www.test.abc/fromsomeweb/index.html, www.test.abc/test/someweb.html etc.
+someweb\r\nÎòëîâèò âñå ëèíêè òàêèå, êàê www.someweb.com/.., www.test.abc/fromsomeweb/index.html, www.test.abc/test/someweb.html è ò.ï.
+www.test.com/test/someweb.html\r\nWill only find the 'www.test.com/test/someweb.html' file. Note that you have to type the complete path (URL + site path)
+www.test.com/test/someweb.html\r\nÎòëîâèò òîëüêî www.test.com/test/someweb.html. Çàìåòèì, ÷òî íåîáõîäèìî óêàçàòü ïîëíûé àäðåñ ðåñóðñà - õîñò (www.xxx.yyy) è ïóòü (/test/someweb.html)
+All links will match
+Barcha havolarga ruxsat etilgan
+Add exclusion filter
+Mustasno filtrni qo’shmoq
+Add inclusion filter
+Faol filtrni qo’shmoq
+Existing filters
+Qo’shimcha filtrlar
+Cancel changes
+O’zgarishlarni bekor qilmoq
+Save current preferences as default values
+Joriy sozlanmani odatiy tarzda saqlamoq
+Click to confirm
+Tasdiqlamoq
+No log files in %s!
+%s-da log fayl mavjud emas!
+No 'index.html' file in %s!
+%s-da index.html fayli mavjud emas!
+Click to quit WinHTTrack Website Copier
+WinHTTrack Website Copier dasturidan chiqish
+View log files
+Log fayllarni ko’rish
+Browse HTML start page
+Boshlang’ich html sahifani namoyish etmoq
+End of mirror
+Ko’zgu yaratish bajarildi
+View log files
+Log fayllarni ko’rish
+Browse Mirrored Website
+Ko’zguni ko’rish
+New project...
+Yangi loyiha...
+View error and warning reports
+Xatolik va ogohlantirishlar haqidagi hisobotni ko’rish
+View report
+Hisobotni ko’rish
+Close the log file window
+Log oynasini yopish
+Info type:
+Ma’lumot turi:
+Errors
+Xatolar
+Infos
+Ma’lumot
+Find
+Izlash
+Find a word
+So’zni izlash
+Info log file
+Log-fayl haqida
+Warning/Errors log file
+Xatolar/Ogohlatirishlar log fayli
+Unable to initialize the OLE system
+OLE tizimiga kirib bo’lmadi
+WinHTTrack could not find any interrupted download file cache in the specified folder!
+WinHTTrack ko’rsatilgan jilddan bekor qilingan yuklama keshini topa olmadi!
+Could not connect to provider
+Provayder bilan bog’lanishning imkoni yo’q
+receive
+olindi
+request
+so’rov
+connect
+bog'lanish
+search
+izlash
+ready
+tayyor
+error
+xatolik
+Receiving files..
+Fayllar olinmoqda..
+Parsing HTML file..
+HTML fayli tahlil qilinmoqda...
+Purging files..
+Fayllar o’chirilmoqda...
+Loading cache in progress..
+Keshni yuklash ketmoqda..
+Parsing HTML file (testing links)..
+HTML fayli analizlanmoqda (havolalar tekshirilmoqda)...
+Pause - Toggle [Mirror]/[Pause download] to resume operation
+To’xtatildi (davomo etish uchun [Ko’zgu]ni/[Ko’chirishni to’xtatib turish]ni tanlang)
+Finishing pending transfers - Select [Cancel] to stop now!
+Ko’chirishni kechiktirish tugatilmoqda - bekor qilish uchun, Cancelni bosing!
+scanning
+tekshirilmoqda
+Waiting for scheduled time..
+Tayinlangan vaqt boshlanishu kutilmoqda..
+Connecting to provider
+Provayder bilan bog’lanilmoqda
+[%d seconds] to go before start of operation
+Boshlanishiga [%d soniya] qoldi
+Site mirroring in progress [%s, %s bytes]
+Ko’zgu yaratilmoqda [%s, %s bayt]
+Site mirroring finished!
+Ko’zgu yaratish bajarildi!
+A problem occurred during the mirroring operation\n
+Ko’chirib olish jarayonida xatolik yuz berdi\n
+\nDuring:\n
+Davomida:\n
+\nSee the log file if necessary.\n\nClick FINISH to quit WinHTTrack Website Copier.\n\nThanks for using WinHTTrack!
+Agar, zarurat bo’lsa, log faylni ko’ring.\n\nWinHTTrack chiqish uchun OKni bosing.\n\nWinHTTrackdan foydalanganligingiz uchun tashakkur!
+Mirroring operation complete.\nClick Exit to quit WinHTTrack.\nSee log file(s) if necessary to ensure that everything is OK.\n\nThanks for using WinHTTrack!
+Ko’zgu yaratish bajarildi.\nDasturdan chiqish uchun OKni bosing.\nKo’chirib olish muvaffaqiyatli bajarilganligini ko’rish uchun log fayl(lar)ni ko’ring.\n\nWinHTTrackdan foydalanganligingiz uchun tashakkur!
+* * MIRROR ABORTED! * *\r\nThe current temporary cache is required for any update operation and only contains data downloaded during the present aborted session.\r\nThe former cache might contain more complete information; if you do not want to lose that information, you have to restore it and delete the current cache.\r\n[Note: This can easily be done here by erasing the hts-cache/new.* files]\r\n\r\nDo you think the former cache might contain more complete information, and do you want to restore it?
+* * KO’CHIRIB OLISH BEKOR QILINDI! * *\r\nÂðåìåííûé êýø, ñîçäàííûé âî âðåìÿ òåêóùåé ñåññèé, ñîäåðæèò äàííûå, çàãðóæåííûå òîëüêî âî âðåìÿ äàííîé ñåññèè è ïîòðåáóåòñÿ òîëüêî â ñëó÷àå âîçîáíîâëåíèÿ çàêà÷êè.\r\nÎäíàêî, ïðåäûäóùèé êýø ìîæåò ñîäåðæàòü áîëåå ïîëíóþ èíôîðìàöèþ. Åñëè âû íå õîòèòå ïîòåðÿòü ýòè äàííûå, âàì íóæíî óäàëèòü òåêóùèé êýø è âîçîáíîâèòü ïðåäûäóùèé.\r\n(Ýòî ìîæíî ëåãêî ñäåëàòü ïðÿìî çäåñü, óäàëèâ ôàéëû hts-cache/new.]\r\n\r\nÑ÷èòàåòå ëè âû, ÷òî ïðåäûäóùèé êýø ìîæåò ñîäåðæàòü áîëåå ïîëíóþ èíôîðìàöèþ, è õîòèòå ëè âû âîññòàíîâèòü åãî?
+* * MIRROR ERROR! * *\r\nHTTrack has detected that the current mirror is empty. If it was an update, the previous mirror has been restored.\r\nReason: the first page(s) either could not be found, or a connection problem occurred.\r\n=> Ensure that the website still exists, and/or check your proxy settings! <=
+* * XATOLIK! * *\r\nJoriy ko’zgu - bo’sh. Agar yangilanadigan bo’lsa, oldingi ko’zgu tiklanadi.\r\nSababi: birinchi sahifa(lar) topilmadi yoki bog’lanib bo’lmadi.\r\n=> Veb-saytning mavjudligiga ishonch hosil qiling, è/yoki proksi-serverning o’rnatilganligini tekshiring! <=
+\n\nTip: Click [View log file] to see warning or error messages
+\nMaslahat: Xatolik va ogohlantirishlar haqidagi xabarni ko’rish uchun [log faylni ko’rish]ni bosing.
+Error deleting a hts-cache/new.* file, please do it manually
+hts-cache/new.* faylini o’chirishda xatolik, iltimos, uni o’zingiz o’chiring.\r\n
+Do you really want to quit WinHTTrack Website Copier?
+Siz haqiqatan ham WinHTTrackdan chiqishni xohlaysizmi?
+- Mirroring Mode -\n\nEnter address(es) in URL box
+- Ko’zgulashtirish rejimi -\n\nURL maydoniga manzil(lar)ni kiriting.
+- Interactive Wizard Mode (questions) -\n\nEnter address(es) in URL box
+- Interfaol rejimi - 'Wizard' uslubida ko’zgu yaratish (so’rovlar bo’lishi mumkin) -\n\nURL maydoniga manzil(lar)ni kiriting.
+- File Download Mode -\n\nEnter file address(es) in URL box
+- Alohida fayllarni ko’chirib olish rejimi -\n\nURL maydoniga manzil(lar)ni kiriting.
+- Link Testing Mode -\n\nEnter Web address(es) with links to test in URL box
+- Havolalarni sinash rejimi-\n\nSinab ko’rishni xohlasangiz, URL'lari mavjud sahifa manzilini kiriting.
+- Update Mode -\n\nVerify address(es) in URL box, check parameters if necessary then click on 'NEXT' button
+- Yangilash rejimi -\n\nURL maydonidagi manzil(lar)ni tekshiring, so’ngra 'Keyingi' tugmasini bosing.
+- Resume Mode (Interrupted Operation) -\n\nVerify address(es) in URL box, check parameters if necessary then click on 'NEXT' button
+- Olding hosil qilingan ko’zguni davom etirish rejimi -\n\nURL maydonidagi manzil(lar)ni tekshiring, so’ngra 'Keyingi' tugmasini bosing.
+Log files Path
+Log fayl yo’lagi
+Path
+Yo’lak
+- Links List Mode -\n\nUse URL box to enter address(es) of page(s) containing links to mirror
+Ro’yxatdan ko’zgu yaratish rejimi-\n\nKo’zgu yaratish uchun URL maydoniga manzil(lar), sahifa(lar)ni kiriting.
+New project / Import?
+Yangi loyiha / import qilinsinmi?
+Choose criterion
+Amalni tanlang
+Maximum link scanning depth
+Tekshirish maksimal teranligi
+Enter address(es) here
+Manzilni kiriting
+Define additional filtering rules
+Qo’shimcha filtrni tayinlang
+Proxy Name (if needed)
+Proksi nomi, agar kerak bo’lsa
+Proxy Port
+Proksi-server porti raqami
+Define proxy settings
+Proksini o’rnatishni tayinlang
+Use standard HTTP proxy as FTP proxy
+HTTP proksini FTP proksiday ishlatish
+Path
+Yo’lak
+Select Path
+Yo’lakni tanlang
+Path
+Yo’lak
+Select Path
+Yo’lakni tanlang
+Quit WinHTTrack Website Copier
+WinHTTrack Website Copierdan chiqish
+About WinHTTrack
+WinHTTrack dasturi haqida
+Save current preferences as default values
+Joriy o’rnatishni odatiy qilib saqlamoq
+Click to continue
+Davom etirmoq
+Click to define options
+Ko’chirish parametrini belgilamoq
+Click to add a URL
+URL qo’shmoq
+Load URL(s) from text file
+Matnli fayldan URL(lar)ni yuklamoq
+WinHTTrack preferences (*.opt)|*.opt||
+WinHTTrack sozlanmalari (*.opt)|*.opt||
+Address List text file (*.txt)|*.txt||
+Manzillar ro’yxati matnli fayli(*.txt)|*.txt||
+File not found!
+Fayl topilmadi!
+Do you really want to change the project name/path?
+Loyiha/yo’lak nomini o’zgartirishni xohlaysizmi?
+Load user-default options?
+Sukut bo’yicha o’rnatish yuklansinmi?
+Save user-default options?
+Sozlanmalar saqlansinmi?
+Reset all default options?
+Sukut bo’yicha barcha parametrlar qayta o’rnatilsinmi?
+Welcome to WinHTTrack!
+WinHTTrackga xush kelibsiz!
+Action:
+Faoliyatlar turi:
+Max Depth
+Maks. teranlik:
+Maximum external depth:
+Tashqi saytlarning maksimal teranligi:
+Filters (refuse/accept links) :
+Filtrlar (havolalarni yoqmoq/o’chirib qo’ymoq)
+Paths
+Yo’laklar
+Save prefs
+Sozlanmalarni saqlamoq
+Define..
+Belgilamoq...
+Set options..
+Parametrlarni moslamoq...
+Preferences and mirror options:
+Ko’chirib olish parametrlarini moslash:
+Project name
+Loyiha nomi
+Add a URL...
+URLga qo’shmoq...
+Web Addresses: (URL)
+Veb manzil: (URL)
+Stop WinHTTrack?
+WinHTTrack to’xtatilsinmi?
+No log files in %s!
+%s da log fayllar yo’q!
+Pause Download?
+Ko’chirib olish to’xtatib turilsinmi?
+Stop the mirroring operation
+Ko’chirib olishni to’xtatish
+Minimize to System Tray
+Tizim treyiga berkitmoq
+Click to skip a link or stop parsing
+Havolani o’tkazib yuborish yoki fayl analizini to’xtatish
+Click to skip a link
+Havolani o’tkazib yuborish
+Bytes saved
+Saqlangan bayt:
+Links scanned
+Tekshirilgan havolalar:
+Time:
+Vaqt:
+Connections:
+Bog’lanish:
+Running:
+Holati:
+Hide
+Berkitmoq
+Transfer rate
+Ko’chirib olish tezligi:
+SKIP
+O’TKAZIB YUBORISH
+Information
+Ma'lumot
+Files written:
+Saqlangan fayllar:
+Files updated:
+Yangilangan fayllar:
+Errors:
+Xatoliklar:
+In progress:
+Prossesda:
+Follow external links
+Tashqi havoladan fayllarni olmoq
+Test all links in pages
+Sahifadangi barcha fayllarni tekshirmoq
+Try to ferret out all links
+Barcha havolalarni aniqlashga harakat qilmoq
+Download HTML files first (faster)
+Avval HTML-fayllarni ko’chirib olmoq (tez)
+Choose local site structure
+Saytning mahalliy strukturasini tanlamoq
+Set user-defined structure on disk
+Tayinlangan saytning mahalliy strukturasini o’rnatmoq
+Use a cache for updates and retries
+Èñïîëüçîâàòü êýø äëÿ îáíîâëåíèÿ è äîêà÷êè
+Do not update zero size or user-erased files
+Íå êà÷àòü ôàéëû, êîòîðûå áûëè îäíàæäû ñêà÷àíû, äàæå åñëè îíè íóëåâîé äëèíû èëè óäàëåíû
+Create a Start Page
+Boshlang’ich sahifani yaratmoq
+Create a word database of all html pages
+Ñîçäàòü áàçó äàííûõ ñëîâ, ñîäåðæàùèõñÿ â html-ñòðàíèöàõ
+Create error logging and report files
+Ñîçäàòü ëîã ôàéëû ñ èíôîðìàöèåé î ðàáîòå è îøèáêàõ
+Generate DOS 8-3 filenames ONLY
+Ñîçäàâàòü ôàéëû â DOS-ôîðìàòå 8.3
+Generate ISO9660 filenames ONLY for CDROM medias
+Ñîçäàâàòü èìåíà ôàéëîâ â ñòàíäàðòå ISO9660 òîëüêî äëÿ CDROM
+Do not create HTML error pages
+html-xatoliklari fayllarini yozmaslik
+Select file types to be saved to disk
+Diskka saqlash uchun fayl turini tanlang
+Select parsing direction
+Âûáåðèòå íàïðàâëåíèå ïðîäâèæåíèÿ ïî ñàéòó
+Select global parsing direction
+Âûáåðèòå ãëîáàëüíîå íàïðàâëåíèå ïðîäâèæåíèÿ ïî ñàéòó
+Setup URL rewriting rules for internal links (downloaded ones) and external links (not downloaded ones)
+Óñòàíîâèòü ïðàâèëà ïåðåèìåíîâàíèÿ ëèíêîâ êàê äëÿ âíóòðåííèõ (çàêà÷èâàåìûõ) òàê è äëÿ âíåøíèõ (íå çàãðóæàåìûõ) àäðåñîâ
+Max simultaneous connections
+Ìàêñèìàëüíîå ÷èñëî ñîåäèíåíèé
+File timeout
+Ìàêñèìàëüíîå âðåìÿ íå àêòèâíîñòè çàêà÷êè
+Cancel all links from host if timeout occurs
+ ñëó÷àå ïðåâûøåíèÿ âðåìåíè îæèäàíèÿ îòìåíèòü âñå ëèíêè ñ äàííîãî õîñòà
+Minimum admissible transfer rate
+Ìèíèìàëüíî äîïóñòèìàÿ ñêîðîñòü çàêà÷êè
+Cancel all links from host if too slow
+ ñëó÷àå, åñëè õîñò ñëèøêîì ìåäëåííûé, îòìåíèòü âñå ëèíêè ñ äàííîãî õîñòà
+Maximum number of retries on non-fatal errors
+Ìàêñèìàëüíîå ÷èñëî ïîâòîðíûõ ïîïûòîê, â ñëó÷àå íå ôàòàëüíûõ îøèáîê.
+Maximum size for any single HTML file
+Ìàêñèìàëüíûé ðàçìåð ëþáîãî html-ôàéëà
+Maximum size for any single non-HTML file
+Ìàêñèìàëüíûé ðàçìåð ëþáîãî íå HTML-ôàéëà
+Maximum amount of bytes to retrieve from the Web
+Ìàêñèìàëüíîå êîëè÷åñòâî áàéò, äîïóñòèìûõ äëÿ çàêà÷êè
+Make a pause after downloading this amount of bytes
+Ïîñëå çàãðóçêè óêàçàííîãî ÷èñëà áàéòîâ, ñäåëàòü ïàóçó
+Maximum duration time for the mirroring operation
+Ìàêñ. ïðîäîëæèòåëüíîñòü çåðêàëèçàöèè
+Maximum transfer rate
+Ìàêñ. ñêîðîñòü çàêà÷êè
+Maximum connections/seconds (avoid server overload)
+Ìàêñ. êîëè÷åñòâî ñîåäèíåíèé â ñåêóíäó (íå ïåðåãðóæàòü ñåðâåð)
+Maximum number of links that can be tested (not saved!)
+Ìàêñèìàëüíîå ÷èñëî òåñòèðóåìûõ ëèíêîâ (òåñòèðóåìûõ, à íå ñîõðàíÿåìûõ!)
+Browser identity
+Èäåíòèôèêàöèÿ áðîóçåðà (ñòðîêà User-Agent)
+Comment to be placed in each HTML file
+Êîììåíòàðèé, ðàçìåùàåìûé â êàæäîì HTML ôàéëå
+Back to starting page
+Boshlang’ich sahifaga o’tish
+Save current preferences as default values
+Ñîõðàíèòü íàñòðîéêè êàê çíà÷åíèÿ ïî óìîë÷àíèþ
+Click to continue
+Davom etmoq
+Click to cancel changes
+O’zgarishlarni bekor qilish
+Follow local robots rules on sites
+Ïîä÷èíÿòüñÿ ïðàâèëàì äëÿ ðîáîòîâ, óñòàíàâëèâàåìûì ñàéòàìè
+Links to non-localised external pages will produce error pages
+Ïî ññûëêàì íà âíåøíèå ñòðàíèöû (íå ñêà÷àííûå) áóäåò ïåðåõîä ê ñòðàíèöàì îøèáîê
+Do not erase obsolete files after update
+Íå óäàëÿòü ñòàðûå ôàéëû ïîñëå ïðîöåäóðû îáíîâëåíèÿ çåðêàëà
+Accept cookies?
+Ðàçðåøèòü cookies?
+Check document type when unknown?
+Ïðîâåðÿòü òèï äîêóìåíòà, â ñëó÷àå êîãäà îí íå èçâåñòåí?
+Parse java applets to retrieve included files that must be downloaded?
+Àíàëèçèðîâàòü ÿâà-àïïëåòû ñ öåëüþ îïðåäåëåíèÿ âêëþ÷àåìûå ôàéëîâ?
+Store all files in cache instead of HTML only
+Ïðèíóäèòåëüíî ñîõðàíÿòü âñå ôàéëû â êýøå, à íå òîëüêî ôàéëû HTML
+Log file type (if generated)
+Òèï log ôàëà
+Maximum mirroring depth from root address
+Ìàêñ. ãëóáèíà ñîçäàíèÿ çåðêàëà îò íà÷àëüíîãî àäðåñà
+Maximum mirroring depth for external/forbidden addresses (0, that is, none, is the default)
+Ìàêñèìàëüíàÿ ãëóáèíà çàêà÷êè äëÿ âíåøíèõ/çàïðåùåííûõ àäðåñîâ (0, ò.å., íåò îãðàíè÷åíèé, ýòî çíà÷åíèå ïîóìîë÷àíèþ)
+Create a debugging file
+Ñîçäàòü ôàéë ñ îòëàäî÷íîé èíôîðìàöèåé
+Use non-standard requests to get round some server bugs
+Ïîïûòàòüñÿ îáîéòè îøèáêè íåêîòîðûõ ñåðâåðîâ, èñïîëüçóÿ íå ñòàíäàðòíûå çàïðîñû
+Use old HTTP/1.0 requests (limits engine power!)
+Èñïîëüçîâàòü ñòàðûé ïðîòîêîë HTTP/1.0 (îãðàíè÷èò âîçìîæíîñòè ïðîãðàììû!)
+Attempt to limit retransfers through several tricks (file size test..)
+Ïîïûòêà îãðàíè÷èòü ïåðåêà÷êó èñïîëüóÿ íåêîòîðûå ïðèåìû (òåñò íà ðàçìåð ôàéëà..)
+Attempt to limit the number of links by skipping similar URLs (www.foo.com==foo.com, http=https ..)
+Îãðàíè÷èòü ÷èñëî ëèíêîâ, óäàëÿÿ àíàëîãè÷íûå ëèíêè (www.foo.com==foo.com, http=https ..)
+Write external links without login/password
+Ñîõðàíÿòü âíåøíèå ëèíêè áåç ëîãèíà/ïàðîëÿ
+Write internal links without query string
+Ñîõðàíÿòü âíóòðåííèå ëèíêè óñå÷åííî (äî çàíàêà ?)
+Get non-HTML files related to a link, eg external .ZIP or pictures
+html fayllarga yaqin bo’lmagan havolalarni ko’chirib olmaslik (msln.: tashqi .ZIP yoki graf. fayllar)
+Test all links (even forbidden ones)
+Barcha havolalarni sinab ko’rmoq (hatto taqiqlanganlarini ham)
+Try to catch all URLs (even in unknown tags/code)
+Ñòàðàòüñÿ îïðåäåëÿòü âñå URL'û (äàæå â íåîïîçíàííûõ òýãàõ/ñêðèïòàõ)
+Get HTML files first!
+Ïîëó÷èòü âíà÷àëå HTML ôàéëû!
+Structure type (how links are saved)
+Òèï ëîêàëüíîé ñòðóêòóðû çåðêàëà (ñïîñîá ñîõðàíåíèÿ ôàéëîâ)
+Use a cache for updates
+Èñïîëüçîâàòü êýø äëÿ îáíîâëåíèÿ
+Do not re-download locally erased files
+Íå êà÷àòü çàíîâî ëîêàëüíî óäàëåííûå ôàéëû
+Make an index
+Indeks yaratmoq
+Make a word database
+So’z bazasini yaratmoq
+Log files
+Log fayllar
+DOS names (8+3)
+DOS-fayllar formati (8+3)
+ISO9660 names (CDROM)
+ISO9660 standartidagi nomlar (CDROM)
+No error pages
+Xatosiz sahifalar
+Primary Scan Rule
+Asosiy filtr
+Travel mode
+Tekshirish rejimi
+Global travel mode
+Global tekshiruv rejimi
+These options should be modified only exceptionally
+Êàê ïðàâèëî, ýòè íàñòðîéêè èçìåíÿòü íå ñëåäóåò
+Activate Debugging Mode (winhttrack.log)
+Tuzatish rejimini yoqmoq (winhttrack.log)
+Rewrite links: internal / external
+Havolalarni qayta nomlamoq: ichki/tashqi
+Flow control
+Tekshrish yo’nalishi nazorati
+Limits
+Cheklovlar
+Identity
+Identifikator
+HTML footer
+Quyi HTML kolontitul
+N# connections
+N# bog’lanish
+Abandon host if error
+Ïðåêðàòèòü çàêà÷êó ñ õîñòà, â ñëó÷àå îøèáêè
+Minimum transfer rate (B/s)
+Ìèíèìàëüíàÿ ñêîðîñòü çàêà÷êè (B/s)
+Abandon host if too slow
+Ïðåêðàòèòü çàêà÷êó ñ õîñòà, åñëè îíà ñëèøêîì ìåäëåííàÿ
+Configure
+Moslamoq
+Use proxy for ftp transfers
+Èñïîëüçîâàòü ïðîêñè äëÿ ftp-çàêà÷êè
+TimeOut(s)
+Taym-out
+Persistent connections (Keep-Alive)
+Ïîñòîÿííûå ñîåäèíåíèÿ (Keep-Alive)
+Reduce connection time and type lookup time using persistent connections
+Óìåíüøèòü âðåìåíà ñîåäèíåíèÿ è îáðàùåíèÿ èñïîëüçóÿ ïîñòîÿííûå ñîåäèíåíèÿ
+Retries
+Ïîâòîðíûå ïîïûòêè
+Size limit
+Îãðàíè÷åíèå ïî ðàçìåðó
+Max size of any HTML file (B)
+Ìàêñ. ðàçìåð html-ôàéëà:
+Max size of any non-HTML file
+Ìàêñ. ðàçìåð íå-html:
+Max site size
+Ìàêñ. ðàçìåð ñàéòà
+Max time
+Ìàêñ. âðåìÿ çàêà÷êè
+Save prefs
+Sozlanmani saqlash
+Max transfer rate
+Ìàêñ. ñêîðîñòü çàêà÷êè
+Follow robots.txt
+Ñëåäîâàòü ïðàâèëàì èç robots.txt
+No external pages
+Tashqi havolalarsiz
+Do not purge old files
+Íå óäàëÿòü ñòàðûå ôàéëû
+Accept cookies
+Ðàçðåøèòü cookies
+Check document type
+Ïðîâåðÿòü òèï äîêóìåíòà
+Parse java files
+Àíàëèç ÿâà ôàéëîâ
+Store ALL files in cache
+Ñîõðàíÿòü ÂÑÅ ôàéëû â êýøå
+Tolerant requests (for servers)
+Òîëåðàíòíûå çàïðîñû (ê ñåðâåðàì)
+Update hack (limit re-transfers)
+Update hack (îãðàíè÷åíèå ïîâòîðíûõ çàêà÷åê)
+URL hacks (join similar URLs)
+Õàê URL (îáúåäåíèòü àíàëîãè÷íûå URLs)
+Force old HTTP/1.0 requests (no 1.1)
+Èñïîëüçîâàòü ñòàðûé ïðîòîêîë HTTP/1.0 (íå 1.1)
+Max connections / seconds
+Ìàêñ. ÷èñëî ñîåäèíåíèé/ñåê.
+Maximum number of links
+Ìàêñèìàëüíîå ÷èñëî ëèíêîâ
+Pause after downloading..
+Ïàóçà ïîñëå çàãðóçêè...
+Hide passwords
+Parollarni berkitmoq
+Hide query strings
+Ñïðÿòàòü çàïðîñíóþ ÷àñòü ñòðîêè (âñå, ÷òî ïîñëå çíàêà ?)
+Links
+Havolalar
+Build
+Ñòðóêòóðà
+Experts Only
+Ýêñïåðò
+Flow Control
+Óïðàâëåíèå çàêà÷êîé
+Limits
+Îãðàíè÷åíèÿ
+Browser ID
+Èäåíòèôèêàöèÿ
+Scan Rules
+Ôèëüòðû
+Spider
+Êà÷àëêà
+Log, Index, Cache
+Ëîã, Èíäåêñ. Êýø
+Proxy
+Ïðîêñè
+MIME Types
+MIME Types (Òèïû ôàéëîâ)
+Do you really want to quit WinHTTrack Website Copier?
+Âû äåéñòâèòåëüíî õîòèòå çàâåðøèòü ðàáîòó ñ ïðîãðàììîé?
+Do not connect to a provider (already connected)
+Íå ñîåäèíÿòüñÿ ñ ïðîâàéäåðîì (ñîåäèíåíèå óæå óñòàíîâëåíî)
+Do not use remote access connection
+Íå èñïîüçîâàòü óäàëåííîé ñîåäèíåíèÿ
+Schedule the mirroring operation
+Çàêà÷êà ïî ðàñïèñàíèþ
+Quit WinHTTrack Website Copier
+Âûéòè èç WinHTTrack Website Copier
+Back to starting page
+Íàçàä ê íà÷àëüíîé ñòðàíèöå
+Click to start!
+Start!
+No saved password for this connection!
+Íåò ñîõðàíåííîãî ïàðîëÿ äëÿ ýòîãî ñîåäèíåíèÿ
+Can not get remote connection settings
+Íå ìîãó ïîëó÷èòü óñòàíîâêè óäàëåííîãî ñîåäèíåíèÿ
+Select a connection provider
+Âûáåðèòå ïðîâàéäåðà, ê êîòîðîìó óñòàíîâèòü ñîåäèíåíèå
+Start
+Boshlamoq
+Please adjust connection parameters if necessary,\nthen press FINISH to launch the mirroring operation.
+Âû ìîæåòå èëè íà÷àòü çàêà÷êó, íàæàâ êíîïêó ÑÒÀÐÒ, èëè ìîæåòå çàäàòü äîïîëíèòåëüíûå ïàðàìåòðû ñîåäèíåíèÿ
+Save settings only, do not launch download now.
+Òîëüêî ñîõðàíèòü óñòàíîâêè, íå íà÷èíàòü çàêà÷êó.
+On hold
+Çàäåðæêà
+Transfer scheduled for: (hh/mm/ss)
+Æäåì äî: (hh/mm/ss)
+Start
+Íà÷àòü!
+Connect to provider (RAS)
+Ñîåäèíèòüñÿ ñ ïðîâàéäåðîì (RAS)
+Connect to this provider
+Ñîåäèíèòüñÿ ñ ýòèì ïðîâàéäåðîì
+Disconnect when finished
+Îòñîåäèíèòüñÿ ïðè çàâåðøåíèè
+Disconnect modem on completion
+Îòñîåäåíèòü ïðè çàâåðøåíèè
+\r\n(Please notify us of any bug or problem)\r\n\r\nDevelopment:\r\nInterface (Windows): Xavier Roche\r\nSpider: Xavier Roche\r\nJavaParserClasses: Yann Philippot\r\n\r\n(C)1998-2003 Xavier Roche and other contributors\r\nMANY THANKS for translation tips to:\r\nRobert Lagadec (rlagadec@yahoo.fr)
+\r\n(Ñîîáùèòå íàì ïîæàëóéñòà î çàìå÷åííûõ ïðîáëåìàõ è îøèáêàõ)\r\n\r\nÐàçðàáîòêà:\r\nÈíòåðôåéñ (Windows): Xavier Roche\r\nÊà÷àëêà (spider): Xavier Roche\r\nÏàðñåð ÿâà-êëàññîâ: Yann Philippot\r\n\r\n(C)1998-2003 Xavier Roche and other contributors\r\nMANY THANKS for Russian translations to:\r\nAndrei Iliev (andreiiliev@mail.ru)
+About WinHTTrack Website Copier
+Î ïðîãðàììå WinHTTrack Website Copier
+Please visit our Web page
+Ïîæàëóéñòà, ïîñåòèòå íàøó âåá-ñòðàíèöó
+Wizard query
+Âîïðîñ ìàñòåðà
+Your answer:
+Javobingiz:
+Link detected..
+Íàéäåí ëèíê..
+Choose a rule
+Qoidani tanlang
+Ignore this link
+Èãíîðèðîâàòü ýòîò ëèíê
+Ignore directory
+Èãíîðèðîâàòü äèðåêòîðèþ
+Ignore domain
+Èãíîðèðîâàòü äîìåí
+Catch this page only
+Ñêà÷àòü òîëüêî ýòó ñòðàíè÷êó
+Mirror site
+Çåðêàëèçîâàòü ñàéò
+Mirror domain
+Çåðêàëèçîâàòü äîìåí
+Ignore all
+Èãíîðèðîâàòü âñå
+Wizard query
+Âîïðîñ ìàñòåðà
+NO
+YO’Q
+File
+Fayl
+Options
+Tanlovlar
+Log
+Log
+Window
+Oyna
+Help
+Yordam
+Pause transfer
+Ïðèîñòàíîâèòü çàêà÷êó
+Exit
+Chiqish
+Modify options
+Èçìåíèòü íàñòðîéêè
+View log
+Logni ko’rmoq
+View error log
+Log xatolarni ko’rmoq
+View file transfers
+Fayllarni uzatish prossesini ko’rmoq
+Hide
+Berkitmoq
+About WinHTTrack Website Copier
+Dastur haqida...
+Check program updates...
+Ïðîâåðèòü íàëè÷èå îáíîâëåííèé ïðîãðàììû...
+&Toolbar
+Uskunalar paneli
+&Status Bar
+Holat paneli
+S&plit
+Ajratmoq
+File
+Fayl
+Preferences
+Sozlanmalar
+Mirror
+Ko’zgu
+Log
+Log
+Window
+Îêíî
+Help
+Ïîìîùü
+Exit
+Âûõîä
+Load default options
+Çàãðóçèòü çíà÷åíèÿ ïàðàìåòðîâ ïî óìîë÷àíèþ
+Save default options
+Ñîõðàíèòü çíà÷åíèÿ ïî óìîë÷àíèþ
+Reset to default options
+Î÷èñòèòü çíà÷åíèÿ ïî óìîë÷àíèþ
+Load options...
+Çàãðóçèòü íàñòðîéêè...
+Save options as...
+Ñîõðàíèòü íàñòðîéêè êàê...
+Language preference...
+Tilni tanlash
+Contents...
+Mundarija...
+About WinHTTrack...
+WinHTTrack haqida...
+New project\tCtrl+N
+Yangi loyiha\tCtrl+N
+&Open...\tCtrl+O
+&Ochmoq...\tCtrl+O
+&Save\tCtrl+S
+&Saqlamoq\tCtrl+S
+Save &As...
+Quyidagidek &saqlamoq...
+&Delete...
+&O’chirmoq...
+&Browse sites...
+&Saytlarni ko’rish...
+User-defined structure
+Çàäàíèå ñòðóêòóðû
+%n\tName of file without file type (ex: image)\r\n%N\tName of file including file type (ex: image.gif)\r\n%t\tFile type only (ex: gif)\r\n%p\tPath [without ending /] (ex: /someimages)\r\n%h\tHost name (ex: www.someweb.com)\r\n%M\tMD5 URL (128 bits, 32 ascii bytes)\r\n%Q\tMD5 query string (128 bits, 32 ascii bytes)\r\n%q\tMD5 small query string (16 bits, 4 ascii bytes)\r\n\r\n%s?\tShort name (ex: %sN)
+%n\tÈìÿ ôàéëà áåç ðàñøèðåíèÿ (íàïð.: image)\r\n%N\tÈìÿ ôàéëà ñ ðàñøèðåíèåì (íàïð.: image.gif)\r\n%t\tÐàñøèðåíèå ôàéëà (íàïð.: gif)\r\n%p\tÏóòü ê ôàéëó [áåç îêàí÷èâàþùåãî /] (íàïð.: /someimages)\r\n%h\tÈìÿ õîñòà (íàïð.: www.someweb.com)\r\n%M\tURL MD5 (128 bits, 32 ascii bytes)\r\n%Q\tquery string MD5 (128 bits, 32 ascii bytes)\r\n%q\tsmall query string MD5 (16 bits, 4 ascii bytes)\r\n\r\n%s?\tDOS'êîå èìÿ (íàïð: %sN)
+Example:\t%h%p/%n%q.%t\n->\t\tc:\\mirror\\www.someweb.com\\someimages\\image.gif
+Masalan:\t%h%p/%n%q.%t\n->\t\tc:\\mirror\\www.someweb.com\\someimages\\image.gif
+Proxy settings
+Proksini moslash
+Proxy address:
+Proksi manzili:
+Proxy port:
+Port raqami:
+Authentication (only if needed)
+Àóòåíòèôèêàöèÿ (åñëè òðåáóåòñÿ)
+Login
+Login
+Password
+Parol
+Enter proxy address here
+Ââåäèòå àäðåñ ïðîêñè ñåðâåðà
+Enter proxy port here
+Ââåäèòå íîìåð ïîðòà ïðîêñè ñåðâåðà
+Enter proxy login
+Ââåäèòå ëîãèí ïðîêñè
+Enter proxy password
+Ââåäèòå ïàðîëü äëÿ ïðîêñè ñåðâåðà
+Enter project name here
+Ââåäèòå èìÿ ïðîåêòà
+Enter saving path here
+Óêàæèòå êàòàëîã äëÿ ñîõðàíåíèÿ ïðîåêòà
+Select existing project to update
+Äëÿ îáíîâëåíèÿ ïðîåêòà, âûáåðèòå åãî èç ñïèñêà
+Click here to select path
+Âûáðàòü êàòàëîã ïðîåêòà
+Select or create a new category name, to sort your mirrors in categories
+Âûáðàòü èëè ñîçäàòü íîâóþ êàòåãîðèþ äëÿ ñîðòèðîâêè çåðêàë ïî êàòåãîðèÿì
+HTTrack Project Wizard...
+HTTrack loyiha yaratuvchisi...
+New project name:
+Yangi loyiha nomi:
+Existing project name:
+Mavjud loyiha nomi:
+Project name:
+Loyiha nomi:
+Base path:
+Jild:
+Project category:
+Loyiha kategoriyasi:
+C:\\My Web Sites
+C:\\Veb saytlarim
+Type a new project name, \r\nor select existing project to update/resume
+Yangi loyiha nomini kiriting, \r\nyoki mavjud loyihani yangilash/davom etirish uchun tanlang
+New project
+Yangi loyiha
+Insert URL
+URLni qo’ymoq
+URL:
+URL:
+Authentication (only if needed)
+Autentifikatsiya (agar kerak bo’lsa)
+Login
+Login:
+Password
+Parol:
+Forms or complex links:
+Murakkab havolalar:
+Capture URL...
+Çàñå÷ü URL...
+Enter URL address(es) here
+URL manzilni kiriting
+Enter site login
+Ââåäèòå ëîãèí äëÿ äîñòóïà ê ñàéòó
+Enter site password
+Ââåäèòå ïàðîëü äëÿ äîñòóïà ê ñàéòó
+Use this capture tool for links that can only be accessed through forms or javascript code
+Èñïîëüçóéòå ýòî ñðåäñòâî äëÿ îòëîâà äèíàìè÷åñêèõ URL (javascript, ôîðìû è ò.ï.)
+Choose language according to preference
+Âûáîð ÿçûêà
+Catch URL!
+URLni tuting!
+Please set temporary browser proxy settings to the following values (Copy/Paste Proxy Address and Port).\nThen click on the Form SUBMIT button in your browser page, or click on the specific link you want to capture.
+Âðåìåííî óñòàíîâèòå â íàñòðîéêàõ ïðîêñè âàøåãî áðîóçåðà óêàçàííûå íèæå çíà÷åíèÿ àäðåñà è íîìåðà ïîðòà.\nÇàòåì, â áðîóçåðå âûïîëíèòå íåîáõîäèìûå äåéñòâèÿ (ïîñëàòü ôîðìó, àêòèâèçèðîâàòü ñêðèïò è ò.ï.) .
+This will send the desired link from your browser to WinHTTrack.
+Òàêèì îáðàçîì âû ñìîæåòå ïåðåäàòü æåëàåìûé ëèíê èç áðàóçåðà â HTTrack.
+ABORT
+Bekor qilmoq
+Copy/Paste the temporary proxy parameters here
+Vaqtinchalik proksi sozlamasini nusxalamoq/qo’ymoq
+Cancel
+Bekor qilmoq
+Unable to find Help files!
+Íå íàéäåíû ôàéëû ïîìîùè!
+Unable to save parameters!
+Parametrlarni saqlashning imkoni yo’q!
+Please drag only one folder at a time
+Iltimos, faqat bitta jildni surib olib keling
+Please drag only folders, not files
+Iltimos, faqat fayllarni jildni surib olib keling, fayllarni emas
+Please drag folders only
+Iltimos, faqat jildlarni surib olib keling
+Select user-defined structure?
+Âûáðàòü çàäàííóþ âàìè ñòðóêòóðó?
+Please ensure that the user-defined-string is correct,\notherwise filenames will be bogus!
+Ïðîâåðüòå, ÷òî îïðåäåëåííàÿ âàìè ñòðóêòóðà ïðàâèëüíà, â ïðîòèâíîì ñëó÷àå, èìåíà ôàéëîâ áóäóò íåïðåäñêàçóåìû
+Do you really want to use a user-defined structure?
+Âû äåéñòâèòåëüíî õîòèòå âûáðàòü çàäàííóþ ñòðóêòóðó?
+Too manu URLs, cannot handle so many links!!
+Ñëèøêîì ìíîãî URL'îâ, íå ìîãó îáðàáîòàòü òàêîå êîëè÷åñòâî ëèíêîâ!
+Not enough memory, fatal internal error..
+Xotira yetarli emas, jiddiy ichki xatolik...
+Unknown operation!
+Noma'lum operatsiya
+Add this URL?\r\n
+Ushbu URL qo’shilsinmi?\r\n
+Warning: main process is still not responding, cannot add URL(s)..
+Diqqat: so’rovlarga javob bermayapti, URLlarni qo’shishning imkoni yo’q...
+Type/MIME associations
+Ñîîòâåòñâèå òèïó ôàéëîâ (Type/MIME)
+File types:
+Fayl turlari:
+MIME identity:
+MIME identity
+Select or modify your file type(s) here
+Âûáðàòü èëè èçìåíèòü òèïû ôàéëîâ
+Select or modify your MIME type(s) here
+Fayllar turini tanlamoq yoki o’zgartirmoq
+Go up
+Yuqoriga
+Go down
+Pastga
+File download information
+Yuklab olingan fayl haqida
+Freeze Window
+Oynani qotirib qo’ymoq
+More information:
+Qo’shimcha ma’lumot:
+Welcome to WinHTTrack Website Copier!\n\nPlease click on the NEXT button to\n\n- start a new project\n- or resume a partial download
+Äîáðî ïîæàëîâàòü â ïðîãðàììó WinHTTrack Website Copier!\n\nÏîæàëóéñòà íàæìèòå êíîïêó ÄÀËÅÅ äëÿ òîãî, ÷òîáû\n\n- íà÷àòü íîâûé ïðîåêò\n- èëè âîçîáíîâèòü ÷àñòè÷íóþ çàêà÷êó
+File names with extension:\nFile names containing:\nThis file name:\nFolder names containing:\nThis folder name:\nLinks on this domain:\nLinks on domains containing:\nLinks from this host:\nLinks containing:\nThis link:\nALL LINKS
+Èìåíà ôàéëîâ ñ ðàøèðåíèåì:\nÈìåíà ôàéëîâ, ñîäåðæàùèå:\nÝòîò ôàéë:\nÈìåíà ôîëäåðîâ ñîäåðæàò:\nÝòîò ôîëäåð:\nËèíêè èç ýòîãî äîìåíà:\nËèíêè èç äîìåíîâ, ñîäåðæàùèå:\nËèíêè èç ýòîãî õîñòà:\nËèíêè ñîäåðæàùèå:\nÝòîò ëèíê:\nÂÑÅ ËÈÍÊÈ
+Show all\nHide debug\nHide infos\nHide debug and infos
+Ïîêàçàòü âñå\nÑïðÿòàòü îòëàäêó\nÑïðÿòàòü èíôî\nÑïðÿòàòü îòëàäêó è èíôî
+Site-structure (default)\nHtml in web/,       images/other files in web/images/\nHtml in web/html,   images/other in web/images\nHtml in web/,       images/other in web/\nHtml in web/,       images/other in web/xxx, where xxx is the file extension\nHtml in web/html,   images/other in web/xxx\nSite-structure, without www.domain.xxx/\nHtml in site_name/, images/other files in site_name/images/\nHtml in site_name/html, images/other in site_name/images\nHtml in site_name/, images/other in site_name/\nHtml in site_name/, images/other in site_name/xxx\nHtml in site_name/html, images/other in site_name/xxx\nAll files in web/, with random names (gadget !)\nAll files in site_name/, with random names (gadget !)\nUser-defined structure..
+Ñòðóêòóðà ñàéòà (ïî óìîë÷àíèþ)\nHtml/, ôàéëû èçîáðàæåíèé/äðóãèå ôàéëû/ôàéëû èçîáðàæåíèé/\nHtml/html, ôàéëû èçîáðàæåíèé/äðóãèå ôàéëû/ôàéëû èçîáðàæåíèé\nHtml/, ôàéëû èçîáðàæåíèé/äðóãèå ôàéëû/\nHtml/, ôàéëû èçîáðàæåíèé/äðóãèå ôàéëû/xxx, ãäå xxx - ðàñøèðåíèå ôàéëà\nHtml, ôàéëû èçîáðàæåíèé/äðóãèå ôàéëû/xxx\nÑòðóêòóðà ñàéòà áåç www.domain.xxx/\nHtml â site_name/ ôàéëû èçîáðàæåíèé/äðóãèå ôàéëû â site_name/ôàéëû èçîáðàæåíèé/\nHtml â site_name/html, ôàéëû èçîáðàæåíèé/äðóãèå ôàéëû â site_name/ôàéëû èçîáðàæåíèé\nHtml â site_name/, ôàéëû èçîáðàæåíèé/äðóãèå ôàéëû â site_name/\nHtml â site_name/, ôàéëû èçîáðàæåíèé/äðóãèå ôàéëû â site_name/xxx\nHtml â site_name/html, ôàéëû èçîáðàæåíèé/äðóãèå ôàéëû â site_name/xxx\nÂñå ôàéëû èç âåáà/, ñ ïðîèçâîëüíûìè èìåíàìè (íîâèíêà !)\nÂñå ôàéëû èç site_name/, ñ ïðîèçâîëüíûìè èìåíàìè (íîâèíêà !)\nÇàäàííàÿ ïîëüçîâàòåëåì ñòðóêòóðà...
+Just scan\nStore html files\nStore non html files\nStore all files (default)\nStore html files first
+Òîëüêî ñêàíèðîâàòü\nÑîõðàíÿòü html ôàéëû\nÑîõðàíÿòü íå html ôàéëû\nÑîõðàíÿòü âñå ôàéëû (ïî óìîë÷àíèþ)\nÑîõðàíÿòü âíà÷àëå html ôàéëû
+Stay in the same directory\nCan go down (default)\nCan go up\nCan both go up & down
+Îñòàâàòüñÿ â òîéæå äèðåêòîðèè\nÌîæíî äâèãàòüñÿ âíèç (ïî óìîë÷àíèþ)\nÌîæíî äâèãàòüñÿ ââåðõ\nÌîæíî äâèãàòüñÿ ââåðõ è âíèç
+Stay on the same address (default)\nStay on the same domain\nStay on the same top level domain\nGo everywhere on the web
+Îñòàâàòüñÿ íà òîì æå àäðåñå (ïî óìîë÷àíèþ)\nÎñòàâàòüñÿ íà òîì æå äîìåíå\nÎñòàâàòüñÿ íà òîì æå äîìåíå âåðõíåãî óðîâíÿ\nÈäòè êóäà óãîäíî
+Never\nIf unknown (except /)\nIf unknown
+Hech qachon\nAgar noma'lum bo’lsa (/ dan boshqasi)\nAgar noma'lum bo’lsa
+no robots.txt rules\nrobots.txt except wizard\nfollow robots.txt rules
+Íå ïîä÷èíÿòüñÿ ïðàâèëàì robots.txt\nrobots.txt êðîìå Ìàñòåðà\nïîä÷èíÿòüñÿ ïðàâèëàì robots.txt
+normal\nextended\ndebug
+Odatiy\nkengaytirilgan\ntuzatish
+Download web site(s)\nDownload web site(s) + questions\nGet individual files\nDownload all sites in pages (multiple mirror)\nTest links in pages (bookmark test)\n* Continue interrupted download\n* Update existing download
+Sayt(lar)ni ko’chirib olish\nSayt(lar)ni ko’chirib olmoq +savollar\nAlohida fayllarni yuklab olmoq\nBarcha saytlarni sahifalari bilan ko’chirib olish (bir necha ko’zgu)\nHavolalarni sahifasi bilan sinamoq (xatcho’p testi)\n* To’xtatilganni davom etirmoq\n* Mavjud yuklamani yangilamoq
+Relative URI / Absolute URL (default)\nAbsolute URL / Absolute URL\nAbsolute URI / Absolute URL\nOriginal URL / Original URL
+Îòíîñèòåëüíûé URI / Àáñîëþòíûé URL (ïî óìîë÷àíèþ)\nÀáñîëþòíûé URL / Àáñîëþòíûé URL\nÀáñîëþòíûé URI / Àáñîëþòíûé URL\nÏåðâîíà÷àëüíûé URL / Ïåðâîíà÷àëüíûé URL
+Open Source offline browser
+Open Source offlayn brauzer
+Website Copier/Offline Browser. Copy remote websites to your computer. Free.
+Veb-saytlarni oluvchi/Offlayn brauzer. Kompyuteringizga veb-saytlarni ko’chirib beradi. Bepul.
+httrack, winhttrack, webhttrack, offline browser
+httrack, winhttrack, webhttrack, offline browser
+URL list (.txt)
+URLlar ro’yxati (.txt)
+Previous
+Ortga
+Next
+Keyingi
+URLs
+URLs
+Warning
+Ogohlatirish
+Your browser does not currently support javascript. For better results, please use a javascript-aware browser.
+Âàø áðàóçåð èëè íå ïîääåðæèâàåò javascript èëè åãî ïîääåðæêà âûêëþ÷åíà. Äëÿ ïîëó÷åíèÿ íàèëó÷øåãî ðåçóëüòàòà àêòèâèçèðóéòå ïîääåðæêó javascript.
+Thank you
+Rahmat
+You can now close this window
+Endi bu oynani yopsangiz bo’ladi
+Server terminated
+Server terminated
+A fatal error has occurred during this mirror
+Joriy ko’chirish vaqtida jiddiy xatolik yuz berdi

libtest/Makefile.am

@@ -12,39 +12,45 @@ AM_CPPFLAGS = \
 	-DSYSCONFDIR=\""$(sysconfdir)"\" \
 	-DDATADIR=\""$(datadir)"\" \
 	-DLIBDIR=\""$(libdir)"\"
-
 AM_CPPFLAGS += -I../src
-AM_LDFLAGS = -L../src
+
+# The callback examples reference libc only through libhttrack, so the direct
+# libc edge gets dropped from DT_NEEDED (library-not-linked-against-libc).
+# Force libc to be recorded as a dependency.
+AM_LDFLAGS = \
+	@DEFAULT_LDFLAGS@ \
+	-L../src \
+	-Wl,--push-state,--no-as-needed,-lc,--pop-state
 
 # Examples
 libbaselinks_la_SOURCES =  callbacks-example-baselinks.c
 libbaselinks_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libbaselinks_la_LDFLAGS = -version-info 1:0:0
+libbaselinks_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 libchangecontent_la_SOURCES =  callbacks-example-changecontent.c
 libchangecontent_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libchangecontent_la_LDFLAGS = -version-info 1:0:0
+libchangecontent_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 libcontentfilter_la_SOURCES =  callbacks-example-contentfilter.c
 libcontentfilter_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libcontentfilter_la_LDFLAGS = -version-info 1:0:0
+libcontentfilter_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 libdisplayheader_la_SOURCES =  callbacks-example-displayheader.c
 libdisplayheader_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libdisplayheader_la_LDFLAGS = -version-info 1:0:0
+libdisplayheader_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 libfilename2_la_SOURCES =  callbacks-example-filename2.c
 libfilename2_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libfilename2_la_LDFLAGS = -version-info 1:0:0
+libfilename2_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 libfilename_la_SOURCES =  callbacks-example-filename.c
 libfilename_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libfilename_la_LDFLAGS = -version-info 1:0:0
+libfilename_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 libfilenameiisbug_la_SOURCES =  callbacks-example-filenameiisbug.c
 libfilenameiisbug_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libfilenameiisbug_la_LDFLAGS = -version-info 1:0:0
+libfilenameiisbug_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 liblistlinks_la_SOURCES =  callbacks-example-listlinks.c
 liblistlinks_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-liblistlinks_la_LDFLAGS = -version-info 1:0:0
+liblistlinks_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 liblog_la_SOURCES =  callbacks-example-log.c
 liblog_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-liblog_la_LDFLAGS = -version-info 1:0:0
+liblog_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 libsimple_la_SOURCES =  callbacks-example-simple.c
 libsimple_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libsimple_la_LDFLAGS = -version-info 1:0:0
+libsimple_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 pkglib_LTLIBRARIES = libbaselinks.la libchangecontent.la libcontentfilter.la libdisplayheader.la libfilename2.la libfilename.la libfilenameiisbug.la liblistlinks.la liblog.la libsimple.la

libtest/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.16.5 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2021 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,23 +16,61 @@
 
 
 VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
     esac; \
-    test $$am__dry = yes; \
-  }
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -53,15 +90,15 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = libtest
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
 	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
 	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/snprintf.m4 \
-	$(top_srcdir)/configure.ac
+	$(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
@@ -100,85 +137,128 @@ libbaselinks_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
 	$(am__DEPENDENCIES_1) $(top_builddir)/src/libhttrack.la
 am_libbaselinks_la_OBJECTS = callbacks-example-baselinks.lo
 libbaselinks_la_OBJECTS = $(am_libbaselinks_la_OBJECTS)
-libbaselinks_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libbaselinks_la_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+libbaselinks_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+	$(AM_CFLAGS) $(CFLAGS) $(libbaselinks_la_LDFLAGS) $(LDFLAGS) \
+	-o $@
 libchangecontent_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
 	$(am__DEPENDENCIES_1) $(top_builddir)/src/libhttrack.la
 am_libchangecontent_la_OBJECTS = callbacks-example-changecontent.lo
 libchangecontent_la_OBJECTS = $(am_libchangecontent_la_OBJECTS)
-libchangecontent_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libchangecontent_la_LDFLAGS) $(LDFLAGS) -o $@
+libchangecontent_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+	$(AM_CFLAGS) $(CFLAGS) $(libchangecontent_la_LDFLAGS) \
+	$(LDFLAGS) -o $@
 libcontentfilter_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
 	$(am__DEPENDENCIES_1) $(top_builddir)/src/libhttrack.la
 am_libcontentfilter_la_OBJECTS = callbacks-example-contentfilter.lo
 libcontentfilter_la_OBJECTS = $(am_libcontentfilter_la_OBJECTS)
-libcontentfilter_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libcontentfilter_la_LDFLAGS) $(LDFLAGS) -o $@
+libcontentfilter_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+	$(AM_CFLAGS) $(CFLAGS) $(libcontentfilter_la_LDFLAGS) \
+	$(LDFLAGS) -o $@
 libdisplayheader_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
 	$(am__DEPENDENCIES_1) $(top_builddir)/src/libhttrack.la
 am_libdisplayheader_la_OBJECTS = callbacks-example-displayheader.lo
 libdisplayheader_la_OBJECTS = $(am_libdisplayheader_la_OBJECTS)
-libdisplayheader_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libdisplayheader_la_LDFLAGS) $(LDFLAGS) -o $@
+libdisplayheader_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+	$(AM_CFLAGS) $(CFLAGS) $(libdisplayheader_la_LDFLAGS) \
+	$(LDFLAGS) -o $@
 libfilename_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
 	$(am__DEPENDENCIES_1) $(top_builddir)/src/libhttrack.la
 am_libfilename_la_OBJECTS = callbacks-example-filename.lo
 libfilename_la_OBJECTS = $(am_libfilename_la_OBJECTS)
-libfilename_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libfilename_la_LDFLAGS) $(LDFLAGS) -o $@
+libfilename_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+	$(AM_CFLAGS) $(CFLAGS) $(libfilename_la_LDFLAGS) $(LDFLAGS) -o \
+	$@
 libfilename2_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
 	$(am__DEPENDENCIES_1) $(top_builddir)/src/libhttrack.la
 am_libfilename2_la_OBJECTS = callbacks-example-filename2.lo
 libfilename2_la_OBJECTS = $(am_libfilename2_la_OBJECTS)
-libfilename2_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libfilename2_la_LDFLAGS) $(LDFLAGS) -o $@
+libfilename2_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+	$(AM_CFLAGS) $(CFLAGS) $(libfilename2_la_LDFLAGS) $(LDFLAGS) \
+	-o $@
 libfilenameiisbug_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
 	$(am__DEPENDENCIES_1) $(top_builddir)/src/libhttrack.la
 am_libfilenameiisbug_la_OBJECTS = callbacks-example-filenameiisbug.lo
 libfilenameiisbug_la_OBJECTS = $(am_libfilenameiisbug_la_OBJECTS)
-libfilenameiisbug_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libfilenameiisbug_la_LDFLAGS) $(LDFLAGS) -o $@
+libfilenameiisbug_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+	$(AM_CFLAGS) $(CFLAGS) $(libfilenameiisbug_la_LDFLAGS) \
+	$(LDFLAGS) -o $@
 liblistlinks_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
 	$(am__DEPENDENCIES_1) $(top_builddir)/src/libhttrack.la
 am_liblistlinks_la_OBJECTS = callbacks-example-listlinks.lo
 liblistlinks_la_OBJECTS = $(am_liblistlinks_la_OBJECTS)
-liblistlinks_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(liblistlinks_la_LDFLAGS) $(LDFLAGS) -o $@
+liblistlinks_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+	$(AM_CFLAGS) $(CFLAGS) $(liblistlinks_la_LDFLAGS) $(LDFLAGS) \
+	-o $@
 liblog_la_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
 	$(top_builddir)/src/libhttrack.la
 am_liblog_la_OBJECTS = callbacks-example-log.lo
 liblog_la_OBJECTS = $(am_liblog_la_OBJECTS)
-liblog_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+liblog_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 	$(liblog_la_LDFLAGS) $(LDFLAGS) -o $@
 libsimple_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
 	$(am__DEPENDENCIES_1) $(top_builddir)/src/libhttrack.la
 am_libsimple_la_OBJECTS = callbacks-example-simple.lo
 libsimple_la_OBJECTS = $(am_libsimple_la_OBJECTS)
-libsimple_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+libsimple_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 	$(libsimple_la_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
 depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/callbacks-example-baselinks.Plo \
+	./$(DEPDIR)/callbacks-example-changecontent.Plo \
+	./$(DEPDIR)/callbacks-example-contentfilter.Plo \
+	./$(DEPDIR)/callbacks-example-displayheader.Plo \
+	./$(DEPDIR)/callbacks-example-filename.Plo \
+	./$(DEPDIR)/callbacks-example-filename2.Plo \
+	./$(DEPDIR)/callbacks-example-filenameiisbug.Plo \
+	./$(DEPDIR)/callbacks-example-listlinks.Plo \
+	./$(DEPDIR)/callbacks-example-log.Plo \
+	./$(DEPDIR)/callbacks-example-simple.Plo
 am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
 CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
-	$(LDFLAGS) -o $@
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
 SOURCES = $(libbaselinks_la_SOURCES) $(libchangecontent_la_SOURCES) \
 	$(libcontentfilter_la_SOURCES) $(libdisplayheader_la_SOURCES) \
 	$(libfilename_la_SOURCES) $(libfilename2_la_SOURCES) \
@@ -196,12 +276,29 @@ am__can_run_installinfo = \
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
 DATA = $(exemples_DATA)
-ETAGS = etags
-CTAGS = ctags
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
 AM_CFLAGS = @AM_CFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
@@ -210,9 +307,11 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
+CFLAGS_PIE = @CFLAGS_PIE@
 CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
+CSCOPE = @CSCOPE@
+CTAGS = @CTAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFAULT_CFLAGS = @DEFAULT_CFLAGS@
 DEFAULT_LDFLAGS = @DEFAULT_LDFLAGS@
@@ -226,8 +325,10 @@ ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
+ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
+FILECMD = @FILECMD@
 GREP = @GREP@
 HAVE_VISIBILITY = @HAVE_VISIBILITY@
 HTTPS_SUPPORT = @HTTPS_SUPPORT@
@@ -239,6 +340,7 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
+LDFLAGS_PIE = @LDFLAGS_PIE@
 LFS_FLAG = @LFS_FLAG@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
@@ -247,6 +349,7 @@ LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_CV_OBJDIR = @LT_CV_OBJDIR@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -323,6 +426,7 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
+runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
@@ -337,39 +441,42 @@ EXTRA_DIST = $(exemples_DATA) libtest.mak libtest.vcproj
 AM_CPPFLAGS = @DEFAULT_CFLAGS@ @THREADS_CFLAGS@ @V6_FLAG@ @LFS_FLAG@ \
 	-DPREFIX=\""$(prefix)"\" -DSYSCONFDIR=\""$(sysconfdir)"\" \
 	-DDATADIR=\""$(datadir)"\" -DLIBDIR=\""$(libdir)"\" -I../src
-AM_LDFLAGS = -L../src
+AM_LDFLAGS = \
+	@DEFAULT_LDFLAGS@ \
+	-L../src
+
 
 # Examples
 libbaselinks_la_SOURCES = callbacks-example-baselinks.c
 libbaselinks_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libbaselinks_la_LDFLAGS = -version-info 1:0:0
+libbaselinks_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 libchangecontent_la_SOURCES = callbacks-example-changecontent.c
 libchangecontent_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libchangecontent_la_LDFLAGS = -version-info 1:0:0
+libchangecontent_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 libcontentfilter_la_SOURCES = callbacks-example-contentfilter.c
 libcontentfilter_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libcontentfilter_la_LDFLAGS = -version-info 1:0:0
+libcontentfilter_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 libdisplayheader_la_SOURCES = callbacks-example-displayheader.c
 libdisplayheader_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libdisplayheader_la_LDFLAGS = -version-info 1:0:0
+libdisplayheader_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 libfilename2_la_SOURCES = callbacks-example-filename2.c
 libfilename2_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libfilename2_la_LDFLAGS = -version-info 1:0:0
+libfilename2_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 libfilename_la_SOURCES = callbacks-example-filename.c
 libfilename_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libfilename_la_LDFLAGS = -version-info 1:0:0
+libfilename_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 libfilenameiisbug_la_SOURCES = callbacks-example-filenameiisbug.c
 libfilenameiisbug_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libfilenameiisbug_la_LDFLAGS = -version-info 1:0:0
+libfilenameiisbug_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 liblistlinks_la_SOURCES = callbacks-example-listlinks.c
 liblistlinks_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-liblistlinks_la_LDFLAGS = -version-info 1:0:0
+liblistlinks_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 liblog_la_SOURCES = callbacks-example-log.c
 liblog_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-liblog_la_LDFLAGS = -version-info 1:0:0
+liblog_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 libsimple_la_SOURCES = callbacks-example-simple.c
 libsimple_la_LIBADD = $(THREADS_LIBS) $(SOCKET_LIBS) $(top_builddir)/src/libhttrack.la
-libsimple_la_LDFLAGS = -version-info 1:0:0
+libsimple_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0
 pkglib_LTLIBRARIES = libbaselinks.la libchangecontent.la libcontentfilter.la libdisplayheader.la libfilename2.la libfilename.la libfilenameiisbug.la liblistlinks.la liblog.la libsimple.la
 all: all-am
 
@@ -387,14 +494,13 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu libtest/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu libtest/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
 	esac;
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -405,6 +511,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(am__aclocal_m4_deps):
+
 install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	@list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \
@@ -431,32 +538,44 @@ uninstall-pkglibLTLIBRARIES:
 
 clean-pkglibLTLIBRARIES:
 	-test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES)
-	@list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-	  test "$$dir" != "$$p" || dir=.; \
-	  echo "rm -f \"$${dir}/so_locations\""; \
-	  rm -f "$${dir}/so_locations"; \
-	done
+	@list='$(pkglib_LTLIBRARIES)'; \
+	locs=`for p in $$list; do echo $$p; done | \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+	      sort -u`; \
+	test -z "$$locs" || { \
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
+
 libbaselinks.la: $(libbaselinks_la_OBJECTS) $(libbaselinks_la_DEPENDENCIES) $(EXTRA_libbaselinks_la_DEPENDENCIES) 
-	$(libbaselinks_la_LINK) -rpath $(pkglibdir) $(libbaselinks_la_OBJECTS) $(libbaselinks_la_LIBADD) $(LIBS)
+	$(AM_V_CCLD)$(libbaselinks_la_LINK) -rpath $(pkglibdir) $(libbaselinks_la_OBJECTS) $(libbaselinks_la_LIBADD) $(LIBS)
+
 libchangecontent.la: $(libchangecontent_la_OBJECTS) $(libchangecontent_la_DEPENDENCIES) $(EXTRA_libchangecontent_la_DEPENDENCIES) 
-	$(libchangecontent_la_LINK) -rpath $(pkglibdir) $(libchangecontent_la_OBJECTS) $(libchangecontent_la_LIBADD) $(LIBS)
+	$(AM_V_CCLD)$(libchangecontent_la_LINK) -rpath $(pkglibdir) $(libchangecontent_la_OBJECTS) $(libchangecontent_la_LIBADD) $(LIBS)
+
 libcontentfilter.la: $(libcontentfilter_la_OBJECTS) $(libcontentfilter_la_DEPENDENCIES) $(EXTRA_libcontentfilter_la_DEPENDENCIES) 
-	$(libcontentfilter_la_LINK) -rpath $(pkglibdir) $(libcontentfilter_la_OBJECTS) $(libcontentfilter_la_LIBADD) $(LIBS)
+	$(AM_V_CCLD)$(libcontentfilter_la_LINK) -rpath $(pkglibdir) $(libcontentfilter_la_OBJECTS) $(libcontentfilter_la_LIBADD) $(LIBS)
+
 libdisplayheader.la: $(libdisplayheader_la_OBJECTS) $(libdisplayheader_la_DEPENDENCIES) $(EXTRA_libdisplayheader_la_DEPENDENCIES) 
-	$(libdisplayheader_la_LINK) -rpath $(pkglibdir) $(libdisplayheader_la_OBJECTS) $(libdisplayheader_la_LIBADD) $(LIBS)
+	$(AM_V_CCLD)$(libdisplayheader_la_LINK) -rpath $(pkglibdir) $(libdisplayheader_la_OBJECTS) $(libdisplayheader_la_LIBADD) $(LIBS)
+
 libfilename.la: $(libfilename_la_OBJECTS) $(libfilename_la_DEPENDENCIES) $(EXTRA_libfilename_la_DEPENDENCIES) 
-	$(libfilename_la_LINK) -rpath $(pkglibdir) $(libfilename_la_OBJECTS) $(libfilename_la_LIBADD) $(LIBS)
+	$(AM_V_CCLD)$(libfilename_la_LINK) -rpath $(pkglibdir) $(libfilename_la_OBJECTS) $(libfilename_la_LIBADD) $(LIBS)
+
 libfilename2.la: $(libfilename2_la_OBJECTS) $(libfilename2_la_DEPENDENCIES) $(EXTRA_libfilename2_la_DEPENDENCIES) 
-	$(libfilename2_la_LINK) -rpath $(pkglibdir) $(libfilename2_la_OBJECTS) $(libfilename2_la_LIBADD) $(LIBS)
+	$(AM_V_CCLD)$(libfilename2_la_LINK) -rpath $(pkglibdir) $(libfilename2_la_OBJECTS) $(libfilename2_la_LIBADD) $(LIBS)
+
 libfilenameiisbug.la: $(libfilenameiisbug_la_OBJECTS) $(libfilenameiisbug_la_DEPENDENCIES) $(EXTRA_libfilenameiisbug_la_DEPENDENCIES) 
-	$(libfilenameiisbug_la_LINK) -rpath $(pkglibdir) $(libfilenameiisbug_la_OBJECTS) $(libfilenameiisbug_la_LIBADD) $(LIBS)
+	$(AM_V_CCLD)$(libfilenameiisbug_la_LINK) -rpath $(pkglibdir) $(libfilenameiisbug_la_OBJECTS) $(libfilenameiisbug_la_LIBADD) $(LIBS)
+
 liblistlinks.la: $(liblistlinks_la_OBJECTS) $(liblistlinks_la_DEPENDENCIES) $(EXTRA_liblistlinks_la_DEPENDENCIES) 
-	$(liblistlinks_la_LINK) -rpath $(pkglibdir) $(liblistlinks_la_OBJECTS) $(liblistlinks_la_LIBADD) $(LIBS)
+	$(AM_V_CCLD)$(liblistlinks_la_LINK) -rpath $(pkglibdir) $(liblistlinks_la_OBJECTS) $(liblistlinks_la_LIBADD) $(LIBS)
+
 liblog.la: $(liblog_la_OBJECTS) $(liblog_la_DEPENDENCIES) $(EXTRA_liblog_la_DEPENDENCIES) 
-	$(liblog_la_LINK) -rpath $(pkglibdir) $(liblog_la_OBJECTS) $(liblog_la_LIBADD) $(LIBS)
+	$(AM_V_CCLD)$(liblog_la_LINK) -rpath $(pkglibdir) $(liblog_la_OBJECTS) $(liblog_la_LIBADD) $(LIBS)
+
 libsimple.la: $(libsimple_la_OBJECTS) $(libsimple_la_DEPENDENCIES) $(EXTRA_libsimple_la_DEPENDENCIES) 
-	$(libsimple_la_LINK) -rpath $(pkglibdir) $(libsimple_la_OBJECTS) $(libsimple_la_LIBADD) $(LIBS)
+	$(AM_V_CCLD)$(libsimple_la_LINK) -rpath $(pkglibdir) $(libsimple_la_OBJECTS) $(libsimple_la_LIBADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
@@ -464,40 +583,46 @@ mostlyclean-compile:
 distclean-compile:
 	-rm -f *.tab.c
 
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-baselinks.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-changecontent.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-contentfilter.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-displayheader.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-filename.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-filename2.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-filenameiisbug.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-listlinks.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-log.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-simple.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-baselinks.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-changecontent.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-contentfilter.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-displayheader.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-filename.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-filename2.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-filenameiisbug.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-listlinks.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-log.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/callbacks-example-simple.Plo@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
 
 .c.o:
-@am__fastdepCC_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
+@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
 @am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c -o $@ $<
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
 
 .c.obj:
-@am__fastdepCC_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
+@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
 @am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .c.lo:
-@am__fastdepCC_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
+@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
 @am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -526,26 +651,15 @@ uninstall-exemplesDATA:
 	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 	dir='$(DESTDIR)$(exemplesdir)'; $(am__uninstall_files_from_dir)
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
 
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 	set x; \
 	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	$(am__define_uniq_tagged_files); \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -557,15 +671,11 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -574,11 +684,28 @@ GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
 
-distdir: $(DISTFILES)
+distdir-am: $(DISTFILES)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -651,7 +778,16 @@ clean-am: clean-generic clean-libtool clean-pkglibLTLIBRARIES \
 	mostlyclean-am
 
 distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
+		-rm -f ./$(DEPDIR)/callbacks-example-baselinks.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-changecontent.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-contentfilter.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-displayheader.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-filename.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-filename2.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-filenameiisbug.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-listlinks.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-log.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-simple.Plo
 	-rm -f Makefile
 distclean-am: clean-am distclean-compile distclean-generic \
 	distclean-tags
@@ -697,7 +833,16 @@ install-ps-am:
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
+		-rm -f ./$(DEPDIR)/callbacks-example-baselinks.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-changecontent.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-contentfilter.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-displayheader.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-filename.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-filename2.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-filenameiisbug.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-listlinks.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-log.Plo
+	-rm -f ./$(DEPDIR)/callbacks-example-simple.Plo
 	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic
 
@@ -718,20 +863,23 @@ uninstall-am: uninstall-exemplesDATA uninstall-pkglibLTLIBRARIES
 
 .MAKE: install-am install-strip
 
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
-	clean-libtool clean-pkglibLTLIBRARIES ctags distclean \
-	distclean-compile distclean-generic distclean-libtool \
-	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am \
-	install-exemplesDATA install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-pkglibLTLIBRARIES install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	pdf pdf-am ps ps-am tags uninstall uninstall-am \
-	uninstall-exemplesDATA uninstall-pkglibLTLIBRARIES
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
+	clean-generic clean-libtool clean-pkglibLTLIBRARIES \
+	cscopelist-am ctags ctags-am distclean distclean-compile \
+	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-exemplesDATA install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-pkglibLTLIBRARIES \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am uninstall-exemplesDATA \
+	uninstall-pkglibLTLIBRARIES
+
+.PRECIOUS: Makefile
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

license.txt

@@ -1,38 +1,674 @@
-HTTrack Website Copier License Agreement:
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
 
-HTTrack Website Copier, Offline Browser for Windows and Unix
-Copyright (C) 1998-2015 Xavier Roche and other contributors
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
 
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
+                            Preamble
 
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
 
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
 
-In addition, as a special exception, Xavier Roche gives permission to
-link the code of this program with the openSSL library (or with
-modified versions of openSSL that use the same license as openSSL),
-and distribute linked combinations including the two.  You must obey
-the GNU General Public License in all respects for all of the code
-used other than openSSL.  If you modify this file, you may extend this
-exception to your version of the file, but you are not obligated to do
-so.  If you do not wish to do so, delete this exception statement from
-your version.
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
 
-Important notes:
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
 
-We hereby ask people using this source NOT to use it in purpose of grabbing
-emails addresses, or collecting any other private informations on persons.
-This would disgrace our work, and spoil the many hours we spent on it.
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
 
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
 
-Contacting us / support:
-Please refer to the README file
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
 
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<http://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.

m4/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.16.5 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2021 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,61 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
     esac; \
-    test $$am__dry = yes; \
-  }
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -51,19 +88,31 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = m4
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/check_zlib.m4 \
 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
 	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
 	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/snprintf.m4 \
-	$(top_srcdir)/configure.ac
+	$(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
 am__can_run_installinfo = \
@@ -71,10 +120,13 @@ am__can_run_installinfo = \
     n|no|NO) false;; \
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
 AM_CFLAGS = @AM_CFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
@@ -83,9 +135,11 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
+CFLAGS_PIE = @CFLAGS_PIE@
 CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
+CSCOPE = @CSCOPE@
+CTAGS = @CTAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFAULT_CFLAGS = @DEFAULT_CFLAGS@
 DEFAULT_LDFLAGS = @DEFAULT_LDFLAGS@
@@ -99,8 +153,10 @@ ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
+ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
+FILECMD = @FILECMD@
 GREP = @GREP@
 HAVE_VISIBILITY = @HAVE_VISIBILITY@
 HTTPS_SUPPORT = @HTTPS_SUPPORT@
@@ -112,6 +168,7 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
+LDFLAGS_PIE = @LDFLAGS_PIE@
 LFS_FLAG = @LFS_FLAG@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
@@ -120,6 +177,7 @@ LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 LT_CV_OBJDIR = @LT_CV_OBJDIR@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -196,6 +254,7 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
+runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
@@ -220,14 +279,13 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu m4/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu m4/Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
 	esac;
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -244,14 +302,16 @@ mostlyclean-libtool:
 
 clean-libtool:
 	-rm -rf .libs _libs
-tags: TAGS
-TAGS:
+tags TAGS:
 
-ctags: CTAGS
-CTAGS:
+ctags CTAGS:
 
+cscope cscopelist:
 
-distdir: $(DISTFILES)
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -384,15 +444,18 @@ uninstall-am:
 .MAKE: install-am install-strip
 
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
+	cscopelist-am ctags-am distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.